The value stored in the rate field of struct drm_dp_link should
be the actual link-rate and not the bw_code.
Right now the driver stores the code and converts it to the rate.
So fixup the driver to store the rate itself.
Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20190605080424.28731-1-sandor.yu@nxp.com
Like the RK3328, RK322x SoCs offer a Synopsis DesignWare HDMI transmitter
and an Innosilicon HDMI PHY.
Add a new dw_hdmi_plat_data struct, rk3228_hdmi_drv_data.
Assign a set of mostly generic rk3228_hdmi_phy_ops functions.
Add dw_hdmi_rk3228_setup_hpd() to enable the HDMI HPD and DDC lines.
Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20190522224631.25164-1-justin.swartz@risingedge.co.za
The show_fdinfo handler exports the same information available through
debugfs on a per-buffer basis.
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Chenbo Feng <fengc@google.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613223408.139221-4-fengc@google.com
This patch adds complimentary DMA_BUF_SET_NAME ioctls, which lets
userspace processes attach a free-form name to each buffer.
This information can be extremely helpful for tracking and accounting
shared buffers. For example, on Android, we know what each buffer will
be used for at allocation time: GL, multimedia, camera, etc. The
userspace allocator can use DMA_BUF_SET_NAME to associate that
information with the buffer, so we can later give developers a
breakdown of how much memory they're allocating for graphics, camera,
etc.
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Chenbo Feng <fengc@google.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613223408.139221-3-fengc@google.com
By traversing /proc/*/fd and /proc/*/map_files, processes with CAP_ADMIN
can get a lot of fine-grained data about how shmem buffers are shared
among processes. stat(2) on each entry gives the caller a unique
ID (st_ino), the buffer's size (st_size), and even the number of pages
currently charged to the buffer (st_blocks / 512).
In contrast, all dma-bufs share the same anonymous inode. So while we
can count how many dma-buf fds or mappings a process has, we can't get
the size of the backing buffers or tell if two entries point to the same
dma-buf. On systems with debugfs, we can get a per-buffer breakdown of
size and reference count, but can't tell which processes are actually
holding the references to each buffer.
Replace the singleton inode with full-fledged inodes allocated by
alloc_anon_inode(). This involves creating and mounting a
mini-pseudo-filesystem for dma-buf, following the example in fs/aio.c.
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Chenbo Feng <fengc@google.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613223408.139221-2-fengc@google.com
I missed amdgpu in my connnector_helper_funcs->atomic_check conversion,
which is understandably causing compilation failures.
Fixes: 6f3b62781b ("drm: Convert connector_helper_funcs->atomic_check to accept drm_atomic_state")
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [for rcar lvds]
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Karol Herbst <karolherbst@gmail.com>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: dri-devel@lists.freedesktop.org
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614002713.141340-1-sean@poorly.run
Fixes the following warning:
../drivers/gpu/drm/drm_connector.c:981: WARNING: Definition list ends without a blank line; unexpected unindent.
Fixes: a09db883e5 ("drm: Fix docbook warnings in hdr metadata helper structures")
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Ville Syrjä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: "Ville Syrjä" <ville.syrjala@linux.intel.com>
Cc: Hans Verkuil <hansverk@cisco.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org
Cc: Sean Paul <sean@poorly.run> (v1)
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613151727.133696-1-sean@poorly.run
This patch adds a new drm helper library to help drivers implement
self refresh. Drivers choosing to use it will register crtcs and
will receive callbacks when it's time to enter or exit self refresh
mode.
In its current form, it has a timer which will trigger after a
driver-specified amount of inactivity. When the timer triggers, the
helpers will submit a new atomic commit to shut the refreshing pipe
off. On the next atomic commit, the drm core will revert the self
refresh state and bring everything back up to be actively driven.
From the driver's perspective, this works like a regular disable/enable
cycle. The driver need only check the 'self_refresh_active' state in
crtc_state. It should initiate self refresh mode on the panel and enter
an off or low-power state.
Changes in v2:
- s/psr/self_refresh/ (Daniel)
- integrated the psr exit into the commit that wakes it up (Jose/Daniel)
- made the psr state per-crtc (Jose/Daniel)
Changes in v3:
- Remove the self_refresh_(active|changed) from connector state (Daniel)
- Simplify loop in drm_self_refresh_helper_alter_state (Daniel)
- Improve self_refresh_aware comment (Daniel)
- s/self_refresh_state/self_refresh_data/ (Daniel)
Changes in v4:
- Move docbook location below panel (Daniel)
- Improve docbook with references and more detailed explanation (Daniel)
- Instead of register/unregister, use init/cleanup (Daniel)
Changes in v5:
- Resolved conflict in drm_atomic_helper.c #include block
- Resolved conflict in rst with HDCP helper docs
Changes in v6:
- Fix include ordering, clean up forward declarations (Sam)
Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190228210939.83386-2-sean@poorly.run
Link to v2: https://patchwork.freedesktop.org/patch/msgid/20190326204509.96515-1-sean@poorly.run
Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-6-sean@poorly.run
Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-6-sean@poorly.run
Link to v5: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-6-sean@poorly.run
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jose Souza <jose.souza@intel.com>
Cc: Zain Wang <wzz@rock-chips.com>
Cc: Tomasz Figa <tfiga@chromium.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190612145026.191846-1-sean@poorly.run
Everyone who implements connector_helper_funcs->atomic_check reaches
into the connector state to get the atomic state. Instead of continuing
this pattern, change the callback signature to just give atomic state
and let the driver determine what it does and does not need from it.
Eventually all atomic functions should do this, but that's just too much
busy work for me.
Changes in v3:
- Added to the set
Changes in v4:
- None
Changes in v5:
- intel_digital_connector_atomic_check declaration moved to i915_atomic.h
Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-5-sean@poorly.run
Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-5-sean@poorly.run
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: Eric Anholt <eric@anholt.net>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [for rcar lvds]
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-5-sean@poorly.run
This patch adds atomic variants for all of
pre_enable/enable/disable/post_disable bridge functions. These will be
called from the appropriate atomic helper functions. If the bridge
driver doesn't implement the atomic version of the function, we will
fall back to the vanilla implementation.
Note that some drivers call drm_bridge_disable directly, and these cases
are not covered. It's up to the driver to decide whether to implement
both atomic_disable and disable, or if it's not necessary.
Changes in v3:
- Added to the patchset
Changes in v4:
- Fix up docbook references (Daniel)
Changes in v5:
- None
Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-4-sean@poorly.run
Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-4-sean@poorly.run
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-4-sean@poorly.run
Add functions to the atomic core to retrieve the old and new connectors
associated with an encoder in a drm_atomic_state. This is useful for
encoders and bridges that need to access the connector, for instance for
the drm_display_info.
The CRTC associated with the encoder can also be retrieved through the
connector state, and from it, the old and new CRTC states.
Changed in v4:
- Added to the set
Changed in v5:
- Fix up docbook (Daniel & Laurent)
Changed in v6:
- Updated commit subject (Sam)
Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-3-sean@poorly.run
Link to v5: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-3-sean@poorly.run
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[seanpaul removed WARNs from helpers and added docs to explain why
returning NULL might be valid]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611205147.181298-1-sean@poorly.run
This patch adds atomic_enable and atomic_disable callbacks to the
encoder helpers. This will allow encoders to make informed decisions in
their start-up/shutdown based on the committed state.
Aside from the new hooks, this patch also introduces the new signature
for .atomic_* functions going forward. Instead of passing object state
(well, encoders don't have atomic state, but let's ignore that), we pass
the entire atomic state so the driver can inspect more than what's
happening locally.
This is particularly important for the upcoming self refresh helpers.
Changes in v3:
- Added patch to the set
Changes in v4:
- Move atomic_disable above prepare (Daniel)
- Add breadcrumb to .enable() docbook (Daniel)
Changes in v5:
- None
Changes in v6:
- Tweak kerneldoc some more (Sam)
Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-2-sean@poorly.run
Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-2-sean@poorly.run
Link to v5: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-2-sean@poorly.run
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611204959.180855-1-sean@poorly.run
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613114618.GD13119@kroah.com
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Because there is no need to check these functions, a number of local
functions can be made to return void to simplify things as nothing can
fail.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613133439.GA6715@kroah.com
This converts the Analogix display port to use GPIO descriptors
instead of DT-extracted numbers.
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190609231339.22136-1-linus.walleij@linaro.org
This include is only used for some gpio drivers and consumers
that look up GPIO numbers directly from the device tree.
This driver does not use it and only needs <linux/gpio/consumer.h>.
Delete the unused include.
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190609223254.8523-1-linus.walleij@linaro.org
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: "Guido Günther" <agx@sigxcpu.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613115717.GB26335@kroah.com
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Also, because there is no need to save the file dentry, remove the local
variable and just recursively delete the whole directory when shutting
down.
Cc: Lukas Wunner <lukas@wunner.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613114455.GA13119@kroah.com
The cursor handling in mgag200 is complicated to understand. It touches a
number of different BOs, but doesn't really use all of them.
Rewriting the cursor update reduces the amount of cursor state. There are
two BOs for double-buffered HW updates. The source BO updates the one that
is currently not displayed and then switches buffers. Explicit BO locking
has been removed from the code. BOs are simply pinned and unpinned in video
RAM.
v2:
* pin cursor BOs to current location
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613073041.29350-8-tzimmermann@suse.de
Another explicit lock operation of a GEM VRAM BO is located in mgag200's
framebuffer update code. Instead of locking the BO, we pin it to wherever
it is.
v2:
* update with pin flag of 0
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613073041.29350-7-tzimmermann@suse.de
Another explicit lock operation of a GEM VRAM BO is located in AST's
framebuffer update code. Instead of locking the BO, we pin it to wherever
it is.
v2:
* update with pin flag of 0
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613073041.29350-6-tzimmermann@suse.de
The ast driver used to lock the cursor source BO during updates. Locking
should be done internally by the BO's implementation, so we pin it instead
to system memory. The mapping information is also stored in the BO. No
need to have an extra argument to the kmap function.
v2:
* pin cursor BOs to current location
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613073041.29350-5-tzimmermann@suse.de
The ast driver's data structures store unused or uncecessary cursor
state. Most of the cursor state is already stored elsewhere and can
be retrieved when necessary. Remove the obsolete fields and adapt
users accordingly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613073041.29350-4-tzimmermann@suse.de
Pinning a buffer prevents it from being moved to a different memory
location. For some operations, such as buffer updates, it is not
important where the buffer is located. Setting the pin function's
pl_flag argument to 0 will pin the buffer to whereever it is stored.
v2:
* document pin flags in PRIME pin helper
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613073041.29350-2-tzimmermann@suse.de
We never set "vblank" to "false".
Current versions of GCC will initialize it to zero automatically at
certain optimization levels so that's probably why this didn't show up
in testing.
Fixes: 5fc537bfd0 ("drm/mcde: Add new driver for ST-Ericsson MCDE")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190529113458.GG19119@mwanda
ast doesn't implement the mode_set_base_atomic hook this would need,
so this is dead code.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Sam Bobroff <sbobroff@linux.ibm.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: YueHaibing <yuehaibing@huawei.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190612091253.26413-2-daniel.vetter@ffwll.ch
These new physical operations are helpful to power_on/off the dsi
wrapper. If the dsi wrapper is powered in video mode, the display
controller (ltdc) register access will hang when DSI fifos are full.
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1558952499-15418-3-git-send-email-yannick.fertre@st.com
Add power on & off optional physical operation functions, helpful to
program specific registers of the DSI physical part.
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1558952499-15418-2-git-send-email-yannick.fertre@st.com
On Rockchip rk3288-based Chromebooks when you do a suspend/resume
cycle:
1. You lose the ability to detect an HDMI device being plugged in.
2. If you're using the i2c bus built in to dw_hdmi then it stops
working.
Let's call the core dw-hdmi's suspend/resume functions to restore
things.
NOTE: in downstream Chrome OS (based on kernel 3.14) we used the
"late/early" versions of suspend/resume because we found that the VOP
was sometimes resuming before dw_hdmi and then calling into us before
we were fully resumed. For now I have gone back to the normal
suspend/resume because I can't reproduce the problems.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190604204207.168085-2-dianders@chromium.org
On Rockchip rk3288-based Chromebooks when you do a suspend/resume
cycle:
1. You lose the ability to detect an HDMI device being plugged in.
2. If you're using the i2c bus built in to dw_hdmi then it stops
working.
Let's add a hook to the core dw-hdmi driver so that we can call it in
dw_hdmi-rockchip in the next commit.
NOTE: the exact set of steps I've done here in resume come from
looking at the normal dw_hdmi init sequence in upstream Linux plus the
sequence that we did in downstream Chrome OS 3.14. Testing show that
it seems to work, but if an extra step is needed or something here is
not needed we could improve it.
As part of this change we'll refactor the hardware init bits of
dw-hdmi to happen all in one function and all at the same time. Since
we need to init the interrupt mutes before we request the IRQ, this
means moving the hardware init earlier in the function, but there
should be no problems with that. Also as part of this we now
unconditionally init the "i2c" parts of dw-hdmi, but again that ought
to be fine.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190604204207.168085-1-dianders@chromium.org
Apparently little known fact that there's no need to hand-roll your own
anymore. Cc'ing a bunch of driver people who might want to know this
too.
v2: s/none/known/ (Chris Wilson)
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sebastian Reichel <sebastian.reichel@collabora.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: David Lechner <david@lechnology.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611112859.16375-1-daniel.vetter@ffwll.ch
Ease entry for anyone wanting to pick up the bootsplash work by providing
a couple of pointers.
v2: Add Sam as contact (Sam)
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190608152657.36613-6-noralf@tronnes.org
This prepares the modeset code so it can be moved out as-is in the next
patch.
v3: Remove stray newline
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190608152657.36613-3-noralf@tronnes.org
All drivers add all their connectors so there's no need to keep around an
array of available connectors. Instead we just put the useable (not
writeback) connectors in a temporary array using
drm_client_for_each_connector_iter() everytime we probe the outputs.
Other places where it's necessary to look at the connectors, we just
iterate over them using the same iterator function.
Rename functions which signature is changed since they will be moved to
drm_client in a later patch.
v6: Improve commit message (Sam Ravnborg)
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190608152657.36613-2-noralf@tronnes.org
After data is copied to the cache entry, atomic_set is used indicate
that the data is the entry is valid without appropriate memory barriers.
Similarly the read side was missing the corresponding memory barriers.
Signed-off-by: David Riley <davidriley@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190610211810.253227-5-davidriley@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
With this commit drm/amd/ has no longer any uses of
the deprecated drmP.h header file.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190609220757.10862-11-sam@ravnborg.org
Drop use of drmP.h in all files named amdgpu*
in drm/amd/amdgpu/
Fix fallout.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190609220757.10862-10-sam@ravnborg.org
Drop all uses of drmP.h in drm/amd/display/.
Fix fallout.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190609220757.10862-9-sam@ravnborg.org
Delete the only include of drmP.h in powerplay/.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190609220757.10862-8-sam@ravnborg.org
Sandor Yu