Fix following warning:
WARNING: arch/x86/kernel/built-in.o(.text+0x10ea0): Section mismatch: reference to .cpuinit.data:num_processors in 'acpi_unmap_lsapic'
The exported function acpi_unmap_lsapic() references
the variable num_processors that is annotated __cpuinitdata.
Remove the annotation of num_processors as we never know
when an exported function are called.
And drop the needless initialsation to 0.
Warning was seen on 64 bit but similar pattern were seen
in 32 bit - so fix it up there too.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Fix the following warning:
WARNING: arch/x86/kernel/built-in.o(.text+0x3): Section mismatch: reference to .cpuinit.data:force_mwait in 'mwait_usable'
[Seen on 64 bit only but similar pattern exist on 32 bit so fix it there too]
mwait_usable() were only used by a function annotated __cpuinit
so annotate mwait_usable() with __cpuinit to fix the warning.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Fix following warning:
WARNING: arch/x86/kernel/cpu/mcheck/built-in.o(.text+0x1584): Section mismatch: reference to .cpuinit.text:threshold_create_device in 'threshold_cpu_callback'
threshold_cpu_callback() is only used by threshold_cpu_notifier.
threshold_cpu_notifier is only used for cpu hot plug as it is registered
using register_hotcpu_notifier().
Mark them both __cpuinit to fix the warning.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Fix following warning:
WARNING: arch/x86/kernel/cpu/mcheck/built-in.o(.text+0x752): Section mismatch: reference to .cpuinit.text:mce_create_device in 'mce_cpu_callback'
mce_cpu_callback() is only used by mce_cpu_notofier.
The notifier is only used for hotplugable cpu's as it is
registered using register_hotcpu_notifier(),
Annotate them both __cpuinit to fix the warning.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The RDC R-321x SoC needs a reboot fixup which
uses its internal hardware watchdog set to
reset the CPU on next tick.
Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch adds support for the RDC R-321x system-on-chip,
also known as R-861x-(G). It uses the generic GPIO API and
has support for the on-chip hardware watchdog.
Build-fix from: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch defines the PCI identifiers found in
the RDC R-321x System-on-Chip.
Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch adds the generic GPIO support to the x86
architecture. We do the same as for MIPS, we let
the machine override the gpio callbacks and provide
defaults one in mach-generic.
Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The existing Geode GPIO API only allows for updating one GPIO at once. There
are instances where users want to update multiple GPIOs at once. With the
current API, they are given two choices; either ignore the GPIO API:
outl(0xc000, gpio_base + GPIO_OUTPUT_VAL);
outl(0xc000, gpio_base + GPIO_OUTPUT_ENABLE);
Alternatively, call each GPIO update separately:
geode_gpio_set(14, GPIO_OUTPUT_VAL);
geode_gpio_set(15, GPIO_OUTPUT_VAL);
geode_gpio_set(14, GPIO_OUTPUT_ENABLE);
geode_gpio_set(15, GPIO_OUTPUT_ENABLE);
Neither are desirable. This patch changes the GPIO API to allow for setting
of multiple GPIOs at once; rather than being passed an integer, we pass
a bitmask and provide a translation function. The above code would now
look like this:
geode_gpio_set(geode_gpio(14)|geode_gpio(15), GPIO_OUTPUT_VAL);
geode_gpio_set(geode_gpio(14)|geode_gpio(15), GPIO_OUTPUT_ENABLE);
Since there are no upstream users of the GPIO API yet (afaik), best to
change this now. This also adds a bit of sanity checking; it is no
longer possible to use a GPIO above 28.
Note the semantics of geode_gpio_isset() have changed:
geode_gpio_isset(geode_gpio(3)|geode_gpio(4), ...)
will only return true iff both GPIOs are set.
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix cpu MHz reporting for AMD family 0x11 when powernow-k8 is
disabled.
Just adhere to the CONSTANT_TSC feature bit for AMD CPUs when deciding
whether cpu_khz needs calibration. The additional check for CPU family
is not needed and prevents calibration for future CPUs.
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
improve the MTTR trimming messages and also trigger a WARN_ON()
so that kerneloops.org can pick it up and categorize it.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
I found a small bug of NUMA emulation code for x86_64. (CONFIG_NUMA_EMU)
If machine is non-NUMA, find_node_by_addr() should return
NUMA_NO_NODE, but current implementation code returns existent maximum
NUMA node number + 1.
This is not existent NUMA node number.
However, this behaviour does not affect NUMA emulation fortunately, because
acpi_fake_nodes() that is caller of find_node_by_addr() gets pxm
(proximity domain) by node_to_pxm() from non-existent NUMA node number
that was returned by find_node_by_addr().
node_to_pxm() returns PXM_INVAL that means illegal or non-existent
NUMA node number.
Signed-off-by: Minoru Usui <usui@mxm.nes.nec.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Both of these references to cpu_to_node() can potentially occur
before the "late" cpu_to_node map is setup. Therefore, they
should be changed to use early_cpu_to_node().
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The new "mfgptfix" boot command line option may be usd to fix MFGPT
timers on AMD Geode platforms when the BIOS has incorrectly applied
a workaround. TinyBIOS version 0.98 is known to be affected, 0.99
fixes the problem by letting the user disable the workaround.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
No one uses struct cpu_model_info on x86_64 now.
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Use KSYM_NAME_LEN instead of numeric value
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
when MTRRs are not covering the whole e820 table, we need to trim the
RAM and need to update e820.
reuse some code on 64-bit as well.
here need to add early_get_cap and use it in early_cpu_detect, and move
mtrr_bp_init early.
The code successfully trimmed the memory map on Justin's system:
from:
[ 0.000000] BIOS-e820: 0000000100000000 - 000000022c000000 (usable)
to:
[ 0.000000] modified: 0000000100000000 - 0000000228000000 (usable)
[ 0.000000] modified: 0000000228000000 - 000000022c000000 (reserved)
According to Justin it makes quite a difference:
| When I boot the box without any trimming it acts like a 286 or 386,
| takes about 10 minutes to boot (using raptor disks).
Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Tested-by: Justin Piszcz <jpiszcz@lucidpixels.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
fix kconfig text and make DEBUG_RODATA default.
this helps debugging quite a bit.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
With this, the paravirt_ops code can be enabled on x86_64 also.
Each guest implementation (Xen, VMI, lguest) now depends on X86_32. The
dependencies can be dropped for each one when they start to support
x86_64.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This will allow people to enable the paravirt_ops code even when no
guest support is enabled, for broader testing of the paravirt_ops code.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
ibcs2 support has never been supported on 2.6 kernels as far as I know,
and if it has it must have been an external patch. Anyways, if anybody
applies an external patch they could as well readd the ibcs checking
code to the ELF loader in the same patch. But there is no reason to
keep this code running in all Linux kernels. This will save at least
two strcmps each ELF execution.
No deprecation period because it could not have been used anyway.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
the previous patch in the old RTC driver. It also removes the direct
rtc_interrupt() call from arch/x86/kernel/hpetc.c so that there's finally no
(code) dependency to CONFIG_RTC in arch/x86/kernel/hpet.c.
Because of this, it's possible to compile the drivers/char/rtc.ko driver as
module and still use the HPET emulation functionality. This is also expressed
in Kconfig.
Signed-off-by: Bernhard Walle <bwalle@suse.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: Andi Kleen <ak@suse.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Robert Picco <Robert.Picco@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
enabled, then interrupts don't work for the rtc-cmos driver which results in
RTC_AIE*, RTC_PIE* and RTC_ALM being unusable. This affects hwclock from
util-linux-ng at least on i386 since that uses RTC_PIE_ON. (For x86-64, a
polling method is used for unknown reasons.)
This patch series now
1. export the functions from arch/x86/kernel/hpet.c that the old char/rtc
driver uses to work around that problem,
2. makes it possible to compile the old rtc driver as module, while still
having CONFIG_HPET_EMULATE_RTC enabled and
3. makes use of the exported functions in (1) in the new rtc-cmos driver.
This patch:
This patch makes the RTC emulation functions in arch/x86/kernel/hpet.c usable
for kernel modules. It
- exports the functions (EXPORT_SYMBOL_GPL()),
- adds an interface to register the interrupt callback function
instead of using only a fixed callback function and
- replaces the rtc_get_rtc_time() function which depends on
CONFIG_RTC with a call to get_rtc_time() which is defined in
include/asm-generic/rtc.h.
The only dependency to CONFIG_RTC is the call to rtc_interrupt() which is
removed by the next patch. After this, there's no (code) dependency of
this functions to CONFIG_RTC=y any more.
Signed-off-by: Bernhard Walle <bwalle@suse.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: Andi Kleen <ak@suse.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Robert Picco <Robert.Picco@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
I am preparing to convert the boot time page table to the kernels
native format. To achieve that I need to enable PAE. Enabling PSE
and the no execute bit would not hurt. So this patch modifies
the boot cpu path to execute all of the kernels enable code
if and only if we have the proper bits set in mmu_cr4_features.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Mika Penttilä <mika.penttila@kolumbus.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Currently in head_32.S there are two ways we test to see if we
are the boot cpu. By looking at %ebx and by looking at the
static variable ready. When changing things around I have
found that it gets tricky to preserve %ebx. So this
patch just switches head.S over to the more reliable
test of always using ready.
Hopefully later we can kill these tests entirely.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Mika Penttilä <mika.penttila@kolumbus.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Change the size of node ids for X86_64 from u8 to s16 to
accomodate more than 32k nodes and allow for NUMA_NO_NODE
(-1) to be sign extended to int.
Cc: David Rientjes <rientjes@google.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The FLATMEM memory model references a global mem_map and max_mapnr. This
is incompatible with how memory models used for NUMA view the world.
Builds fail if FLATMEM && NUMA are set on x86. This patch forbids that
combination of config items. This is consistent with x86_64
enforcements.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The DISCONTIG memory model on x86 32 bit uses a remap allocator early
in boot. The objective is that portions of every node are mapped in to
the kernel virtual area (KVA) in place of ZONE_NORMAL so that node-local
allocations can be made for pgdat and mem_map structures.
With SPARSEMEM, the amount that is set aside is insufficient for all the
mem_maps to be allocated. During the boot process, it falls back to using
the bootmem allocator. This breaks assumptions that SPARSEMEM makes about
the layout of the mem_map in memory and results in a VM_BUG_ON triggering
due to pfn_to_page() returning garbage values.
This patch only enables the remap allocator for use with DISCONTIG.
Without SRAT support, a compile-error occurs because ACPI table parsing
functions are only available in x86-64. This patch also adds no-op stubs
and prints a warning message. What likely needs to be done is sharing
the table parsing functions between 32 and 64 bit if they are
compatible.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Small fomatting fixes to 64-bit as well, trailing whitespace
and extra semicolon, also move the ifdefs for CONFIG_KALLSYMS
into the function itself.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
call early_cpu_to_node() since per_cpu(cpu_to_node_map) might not be setup
yet.
I also had to export x86_cpu_to_node_map_early_ptr because of some calls
from the network code to numa_node_id():
net/ipv4/netfilter/arp_tables.c:
net/ipv4/netfilter/ip_tables.c:
net/ipv4/netfilter/ip_tables.c:
Signed-off-by: Mike Travis <travis@sgi.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We are driving a motherboard port so use a 2uS explicit delay at this
point.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
additional section for .init.text appending a number.
A side effect of this was a section mismatch warning because modpost did
not recognize a .init.text section named .init.text.1: WARNING:
vmlinux.o(.text.head+0x247): Section mismatch: reference to
.init.text.1:start_kernel (between 'is386' and 'check_x87')
Fix this by hardcoding the "ax" in the pushsection. Thanks to Torlaf for
reporting this.
Alan Modra provided the hint that made me able to locate the root cause of
this warning. And Mike Frysinger told me how to properly fix it using
__INIT/__FINIT.
Fix following Section mismatch warning in addition:
WARNING: vmlinux.o(.text+0x14c8): Section mismatch: reference to .init.data:vsyscall_int80_start (between 'fiddle_vdso' and 'xen_setup_features')
fiddle_vdso was only used from a __init function - so declare it __init.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Toralf Förster <toralf.foerster@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
export __supported_pte_mask variable as GPL symbol.
lguest is a user of it.
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Exporrt check_tsc_unstable function as GPL symbol. lguest is
a user of it.
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
One of the generated files was missed in gitignore.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
sparsemem is only one supported, so could remove FLAT_NODE_MEM related,
that is only needed !SPARSEMEM
Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Reviewed-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
these bugs are harder to find than they seem, a stackdump helps.
make it dependent on CONFIG_DEBUG_SHIRQ so that people can turn it off
if it annoys them.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
An older binutils bug caused us to not fix up alternatives.
This problem involved mutex.c but we dont do lockdep section tricks
there anymore, so this workaround is moot. Keep the printk nevertheless,
just in case ... We can remove that later on.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
add warning to check_tsc_warp() - if get_cycles() does not progress.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
100 million max # of loops is a bit too much - reduce it to 10 million.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Sam Ravnborg