TPM2 can return TPM2_RC_RETRY to any command and when it does we get
unexpected failures inside the kernel that surprise users (this is
mostly observed in the trusted key handling code). The UEFI 2.6 spec
has advice on how to handle this:
The firmware SHALL not return TPM2_RC_RETRY prior to the completion
of the call to ExitBootServices().
Implementer’s Note: the implementation of this function should check
the return value in the TPM response and, if it is TPM2_RC_RETRY,
resend the command. The implementation may abort if a sufficient
number of retries has been done.
So we follow that advice in our tpm_transmit() code using
TPM2_DURATION_SHORT as the initial wait duration and
TPM2_DURATION_LONG as the maximum wait time. This should fix all the
in-kernel use cases and also means that user space TSS implementations
don't have to have their own retry handling.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The Acer Acer Veriton X4110G has a TPM device detected as:
tpm_tis 00:0b: 1.2 TPM (device-id 0xFE, rev-id 71)
After the first S3 suspend, the following error appears during resume:
tpm tpm0: A TPM error(38) occurred continue selftest
Any following S3 suspend attempts will now fail with this error:
tpm tpm0: Error (38) sending savestate before suspend
PM: Device 00:0b failed to suspend: error 38
Error 38 is TPM_ERR_INVALID_POSTINIT which means the TPM is
not in the correct state. This indicates that the platform BIOS
is not sending the usual TPM_Startup command during S3 resume.
>From this point onwards, all TPM commands will fail.
The same issue was previously reported on Foxconn 6150BK8MC and
Sony Vaio TX3.
The platform behaviour seems broken here, but we should not break
suspend/resume because of this.
When the unexpected TPM state is encountered, set a flag to skip the
affected TPM_SaveState command on later suspends.
Cc: stable@vger.kernel.org
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Link: http://lkml.kernel.org/r/CAB4CAwfSCvj1cudi+MWaB5g2Z67d9DwY1o475YOZD64ma23UiQ@mail.gmail.com
Link: https://lkml.org/lkml/2011/3/28/192
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=591031
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
TPM2_CC_Create(0x153) and TPM2_CC_CreatePrimary (0x131) involve generation
of crypto keys which can be a computationally intensive task. The timeout
is set to 3min. Rather than increasing default timeout a new constant is
added, to not stall for too long on regular commands failures.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
use __le64 annotated variable for response buffer address as this is
read in little endian format form the register.
This suppresses sparse warning
drivers/char/tpm/tpm_crb.c:558:18: warning: cast to restricted __le64
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
1. The buffer cannot be const as it is used both for send and receive.
2. Drop useless casting to u8 *, as this is already a
type of 'buf' parameter, it has just masked the 'const' issue.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Fix tmp_ -> tpm_ typo and add reference to 'space' parameter
in kdoc for tpm_transmit and tpm_transmit_cmd functions.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The correct sequence is to first request locality and only after
that perform cmd_ready handshake, otherwise the hardware will drop
the subsequent message as from the device point of view the cmd_ready
handshake wasn't performed. Symmetrically locality has to be relinquished
only after going idle handshake has completed, this requires that
go_idle has to poll for the completion and as well locality
relinquish has to poll for completion so it is not overridden
in back to back commands flow.
Two wrapper functions are added (request_locality relinquish_locality)
to simplify the error handling.
The issue is only visible on devices that support multiple localities.
Fixes: 877c57d0d0 ("tpm_crb: request and relinquish locality 0")
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com>
The driver works well on i.MX31 powered boards with device description
taken from board device tree, the only change to add to the driver is
the missing OF device id, the affected list of included headers and
indentation in platform driver struct are beautified a little.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Kim Phillips <kim.phillips@arm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
/dev/nvram was never meant to be used alongside the RTC CMOS driver from
drivers/rtc as it already expose the NVRAM through another interface..
Anyway, the last defconfig to enable it properly was removed in 2010 so
prevent ARM users from selecting it.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the Altera PCI Vendor id to pci_ids.h and remove the private
definitions from xillybus_pcie.c and altera-cvp.c.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Eli Billauer <eli.billauer@gmail.com>
Cc: Anatolij Gustschin <agust@denx.de>
Acked-by: Eli Billauer <eli.billauer@gmail.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This happens when BMC doesn't return any data and the code is trying
to print the value of data[2].
Getting following crash:
[ 484.728410] Unable to handle kernel NULL pointer dereference at virtual address 00000002
[ 484.736496] pgd = ffff0000094a2000
[ 484.739885] [00000002] *pgd=00000047fcffe003, *pud=00000047fcffd003, *pmd=0000000000000000
[ 484.748158] Internal error: Oops: 96000005 [#1] SMP
[...]
[ 485.101451] Call trace:
[...]
[ 485.188473] [<ffff000000a46e68>] msg_done_handler+0x668/0x700 [ipmi_ssif]
[ 485.195249] [<ffff000000a456b8>] ipmi_ssif_thread+0x110/0x128 [ipmi_ssif]
[ 485.202038] [<ffff0000080f1430>] kthread+0x108/0x138
[ 485.206994] [<ffff0000080838e0>] ret_from_fork+0x10/0x30
[ 485.212294] Code: aa1903e1 aa1803e0 b900227f 95fef6a5 (39400aa3)
Adding a check to validate the data len before printing data[2] to fix this issue.
Signed-off-by: Kamlakant Patel <kamlakant.patel@cavium.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Realtek has some sort of "Virtual" IPMI device on the PCI bus as a
KCS controller, but whatever it is, it's not one. Ignore it if seen.
Reported-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Daniel Drake <drake@endlessm.com>
The IPMI spec states:
The purpose of the SPMI Table is to provide a mechanism that can
be used by the OSPM (an ACPI term for “OS Operating System-directed
configuration and Power Management” essentially meaning an ACPI-aware
OS or OS loader) very early in the boot process, e.g., before the
ability to execute ACPI control methods in the OS is available.
When we are probing IPMI in Linux, ACPI control methods are available,
so we shouldn't be probing using SPMI. It could cause some confusion
during the probing process.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The IPMI spec states:
The purpose of the SPMI Table is to provide a mechanism that can
be used by the OSPM (an ACPI term for “OS Operating System-directed
configuration and Power Management” essentially meaning an ACPI-aware
OS or OS loader) very early in the boot process, e.g., before the
ability to execute ACPI control methods in the OS is available.
When we are probing IPMI in Linux, ACPI control methods are available,
so we shouldn't be probing using SPMI. It could cause some confusion
during the probing process.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Jiandi An <anjiandi@codeaurora.org>
On Armada 7K/8K we need to explicitly enable the register clock. This
clock is optional because not all the SoCs using this IP need it but at
least for Armada 7K/8K it is actually mandatory.
The binding documentation is updating accordingly.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
clk_disable_unprepare() already checks that the clock pointer is valid.
No need to test it before calling it.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Functions cavium_rng_remove and cavium_rng_remove_vf are local to the
source and do not need to be in global scope, so make them static.
Cleans up sparse warnings:
drivers/char/hw_random/cavium-rng-vf.c:80:7: warning: symbol
'cavium_rng_remove_vf' was not declared. Should it be static?
drivers/char/hw_random/cavium-rng.c:65:7: warning: symbol
'cavium_rng_remove' was not declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If platform_device_alloc() then we should return -ENOMEM instead of
returning success.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Use the ARRAY_SIZE macro on a array poweroff_functions to determine
size of the array. Improvement suggested by Coccinelle.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The cleanup code for an init failure and for a device removal were
quite similar, consolidate all that into one function.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
device_remove_group() was called on any cleanup, even if the
device attrs had not been added yet. That can occur in certain
error scenarios, so add a flag to know if it has been added.
Also make sure we remove the dev if we added it ourselves.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: stable@vger.kernel.org # 4.15
Cc: Laura Abbott <labbott@redhat.com>
Tested-by: Bill Perkins <wmp@grnwood.net>
Increase timeout delay to support longer timing linked
to rng initialization. Measurement is based on timer instead
of instructions per iteration which is not powerful on all
targets.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a new property that allow to disable the clock error
detection which is required when the clock source selected
is out of specification (which is not mandatory).
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Avoid issue when probing the RNG without
reset if bad status has been detected previously
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since commit 34ce71a96d ("ALSA: timer: remove legacy rtctimer"), the
rtc_register/rtc_control/rtc_unregister API is unused. As it is highly
unlikely to be needed again, remove it.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
add_interrupt_randomess always wakes up
code blocking on /dev/random. This wake up is done
unconditionally. Unfortunately this means all interrupts
take the wait queue spinlock, which can be rather expensive
on large systems processing lots of interrupts.
We saw 1% cpu time spinning on this on a large macro workload
running on a large system.
I believe it's a recent regression (?)
Always check if there is a waiter on the wait queue
before waking up. This check can be done without
taking a spinlock.
1.06% 10460 [kernel.vmlinux] [k] native_queued_spin_lock_slowpath
|
---native_queued_spin_lock_slowpath
|
--0.57%--_raw_spin_lock_irqsave
|
--0.56%--__wake_up_common_lock
credit_entropy_bits
add_interrupt_randomness
handle_irq_event_percpu
handle_irq_event
handle_edge_irq
handle_irq
do_IRQ
common_interrupt
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This fixes a harmless UBSAN where root could potentially end up
causing an overflow while bumping the entropy_total field (which is
ignored once the entropy pool has been initialized, and this generally
is completed during the boot sequence).
This is marginal for the stable kernel series, but it's a really
trivial patch, and it fixes UBSAN warning that might cause security
folks to get overly excited for no reason.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reported-by: Chen Feng <puck.chen@hisilicon.com>
Cc: stable@vger.kernel.org
And get rid of the license text that is no longer necessary.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Alistair Popple <alistair@popple.id.au>
Cc: Jeremy Kerr <jk@ozlabs.org>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Rocky Craig <rocky.craig@hp.com>
Discrete TPMs are often connected over slow serial buses which, on
some platforms, can have glitches causing bit flips. If a bit does
flip it could cause an overrun if it's in one of the size parameters,
so sanity check that we're not overrunning the provided buffer when
doing a memcpy().
Signed-off-by: Jeremy Boone <jeremy.boone@nccgroup.trust>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
Discrete TPMs are often connected over slow serial buses which, on
some platforms, can have glitches causing bit flips. In all the
driver _recv() functions, we need to use a u32 to unmarshal the
response size, otherwise a bit flip of the 31st bit would cause the
expected variable to go negative, which would then try to read a huge
amount of data. Also sanity check that the expected amount of data is
large enough for the TPM header.
Signed-off-by: Jeremy Boone <jeremy.boone@nccgroup.trust>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
Discrete TPMs are often connected over slow serial buses which, on
some platforms, can have glitches causing bit flips. In all the
driver _recv() functions, we need to use a u32 to unmarshal the
response size, otherwise a bit flip of the 31st bit would cause the
expected variable to go negative, which would then try to read a huge
amount of data. Also sanity check that the expected amount of data is
large enough for the TPM header.
Signed-off-by: Jeremy Boone <jeremy.boone@nccgroup.trust>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
Discrete TPMs are often connected over slow serial buses which, on
some platforms, can have glitches causing bit flips. In all the
driver _recv() functions, we need to use a u32 to unmarshal the
response size, otherwise a bit flip of the 31st bit would cause the
expected variable to go negative, which would then try to read a huge
amount of data. Also sanity check that the expected amount of data is
large enough for the TPM header.
Signed-off-by: Jeremy Boone <jeremy.boone@nccgroup.trust>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
Discrete TPMs are often connected over slow serial buses which, on
some platforms, can have glitches causing bit flips. In all the
driver _recv() functions, we need to use a u32 to unmarshal the
response size, otherwise a bit flip of the 31st bit would cause the
expected variable to go negative, which would then try to read a huge
amount of data. Also sanity check that the expected amount of data is
large enough for the TPM header.
Signed-off-by: Jeremy Boone <jeremy.boone@nccgroup.trust>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
Many for coding-style fixes, and update the poll API with the new
type '__poll_t', this is new commit from linux-4.16-rc1.
Signed-off-by: Haiyue Wang <haiyue.wang@linux.intel.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 1465255 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Cc: Haiyue Wang <haiyue.wang@linux.intel.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The KCS (Keyboard Controller Style) interface is used to perform in-band
IPMI communication between a server host and its BMC (BaseBoard Management
Controllers).
This driver exposes the KCS interface on ASpeed SOCs (AST2400 and AST2500)
as a character device. Such SOCs are commonly used as BMCs and this driver
implements the BMC side of the KCS interface.
Signed-off-by: Haiyue Wang <haiyue.wang@linux.intel.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Provides a device driver for the KCS (Keyboard Controller Style)
IPMI interface which meets the requirement of the BMC (Baseboard
Management Controllers) side for handling the IPMI request from
host system software.
Signed-off-by: Haiyue Wang <haiyue.wang@linux.intel.com>
[Removed the selectability of IPMI_KCS_BMC, as it doesn't do much
good to have it by itself.]
Signed-off-by: Corey Minyard <cminyard@mvista.com>
In case the probe of the clock is deferred, we would assume it is
optional. This is wrong, so defer the probe of this driver until
the clock is available.
Fixes: 791af4f490 ("hwrng: bcm2835 - Manage an optional clock")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixes the following sparse warnings:
drivers/char/hw_random/imx-rngc.c:303:1: warning:
symbol 'imx_rngc_pm_ops' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull x86 PTI and Spectre related fixes and updates from Ingo Molnar:
"Here's the latest set of Spectre and PTI related fixes and updates:
Spectre:
- Add entry code register clearing to reduce the Spectre attack
surface
- Update the Spectre microcode blacklist
- Inline the KVM Spectre helpers to get close to v4.14 performance
again.
- Fix indirect_branch_prediction_barrier()
- Fix/improve Spectre related kernel messages
- Fix array_index_nospec_mask() asm constraint
- KVM: fix two MSR handling bugs
PTI:
- Fix a paranoid entry PTI CR3 handling bug
- Fix comments
objtool:
- Fix paranoid_entry() frame pointer warning
- Annotate WARN()-related UD2 as reachable
- Various fixes
- Add Add Peter Zijlstra as objtool co-maintainer
Misc:
- Various x86 entry code self-test fixes
- Improve/simplify entry code stack frame generation and handling
after recent heavy-handed PTI and Spectre changes. (There's two
more WIP improvements expected here.)
- Type fix for cache entries
There's also some low risk non-fix changes I've included in this
branch to reduce backporting conflicts:
- rename a confusing x86_cpu field name
- de-obfuscate the naming of single-TLB flushing primitives"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
x86/entry/64: Fix CR3 restore in paranoid_exit()
x86/cpu: Change type of x86_cache_size variable to unsigned int
x86/spectre: Fix an error message
x86/cpu: Rename cpu_data.x86_mask to cpu_data.x86_stepping
selftests/x86/mpx: Fix incorrect bounds with old _sigfault
x86/mm: Rename flush_tlb_single() and flush_tlb_one() to __flush_tlb_one_[user|kernel]()
x86/speculation: Add <asm/msr-index.h> dependency
nospec: Move array_index_nospec() parameter checking into separate macro
x86/speculation: Fix up array_index_nospec_mask() asm constraint
x86/debug: Use UD2 for WARN()
x86/debug, objtool: Annotate WARN()-related UD2 as reachable
objtool: Fix segfault in ignore_unreachable_insn()
selftests/x86: Disable tests requiring 32-bit support on pure 64-bit systems
selftests/x86: Do not rely on "int $0x80" in single_step_syscall.c
selftests/x86: Do not rely on "int $0x80" in test_mremap_vdso.c
selftests/x86: Fix build bug caused by the 5lvl test which has been moved to the VM directory
selftests/x86/pkeys: Remove unused functions
selftests/x86: Clean up and document sscanf() usage
selftests/x86: Fix vDSO selftest segfault for vsyscall=none
x86/entry/64: Remove the unused 'icebp' macro
...
x86_mask is a confusing name which is hard to associate with the
processor's stepping.
Additionally, correct an indent issue in lib/cpu.c.
Signed-off-by: Jia Zhang <qianyue.zj@alibaba-inc.com>
[ Updated it to more recent kernels. ]
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@alien8.de
Cc: tony.luck@intel.com
Link: http://lkml.kernel.org/r/1514771530-70829-1-git-send-email-qianyue.zj@alibaba-inc.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:
for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
done
with de-mangling cleanups yet to come.
NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do. But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.
The next patch from Al will sort out the final differences, and we
should be all done.
Scripted-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ttq9
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
- skip AER driver error recovery callbacks for correctable errors
reported via ACPI APEI, as we already do for errors reported via the
native path (Tyler Baicar)
- fix DPC shared interrupt handling (Alex Williamson)
- print full DPC interrupt number (Keith Busch)
- enable DPC only if AER is available (Keith Busch)
- simplify DPC code (Bjorn Helgaas)
- calculate ASPM L1 substate parameter instead of hardcoding it (Bjorn
Helgaas)
- enable Latency Tolerance Reporting for ASPM L1 substates (Bjorn
Helgaas)
- move ASPM internal interfaces out of public header (Bjorn Helgaas)
- allow hot-removal of VGA devices (Mika Westerberg)
- speed up unplug and shutdown by assuming Thunderbolt controllers
don't support Command Completed events (Lukas Wunner)
- add AtomicOps support for GPU and Infiniband drivers (Felix Kuehling,
Jay Cornwall)
- expose "ari_enabled" in sysfs to help NIC naming (Stuart Hayes)
- clean up PCI DMA interface usage (Christoph Hellwig)
- remove PCI pool API (replaced with DMA pool) (Romain Perier)
- deprecate pci_get_bus_and_slot(), which assumed PCI domain 0 (Sinan
Kaya)
- move DT PCI code from drivers/of/ to drivers/pci/ (Rob Herring)
- add PCI-specific wrappers for dev_info(), etc (Frederick Lawler)
- remove warnings on sysfs mmap failure (Bjorn Helgaas)
- quiet ROM validation messages (Alex Deucher)
- remove redundant memory alloc failure messages (Markus Elfring)
- fill in types for compile-time VGA and other I/O port resources
(Bjorn Helgaas)
- make "pci=pcie_scan_all" work for Root Ports as well as Downstream
Ports to help AmigaOne X1000 (Bjorn Helgaas)
- add SPDX tags to all PCI files (Bjorn Helgaas)
- quirk Marvell 9128 DMA aliases (Alex Williamson)
- quirk broken INTx disable on Ceton InfiniTV4 (Bjorn Helgaas)
- fix CONFIG_PCI=n build by adding dummy pci_irqd_intx_xlate() (Niklas
Cassel)
- use DMA API to get MSI address for DesignWare IP (Niklas Cassel)
- fix endpoint-mode DMA mask configuration (Kishon Vijay Abraham I)
- fix ARTPEC-6 incorrect IS_ERR() usage (Wei Yongjun)
- add support for ARTPEC-7 SoC (Niklas Cassel)
- add endpoint-mode support for ARTPEC (Niklas Cassel)
- add Cadence PCIe host and endpoint controller driver (Cyrille
Pitchen)
- handle multiple INTx status bits being set in dra7xx (Vignesh R)
- translate dra7xx hwirq range to fix INTD handling (Vignesh R)
- remove deprecated Exynos PHY initialization code (Jaehoon Chung)
- fix MSI erratum workaround for HiSilicon Hip06/Hip07 (Dongdong Liu)
- fix NULL pointer dereference in iProc BCMA driver (Ray Jui)
- fix Keystone interrupt-controller-node lookup (Johan Hovold)
- constify qcom driver structures (Julia Lawall)
- rework Tegra config space mapping to increase space available for
endpoints (Vidya Sagar)
- simplify Tegra driver by using bus->sysdata (Manikanta Maddireddy)
- remove PCI_REASSIGN_ALL_BUS usage on Tegra (Manikanta Maddireddy)
- add support for Global Fabric Manager Server (GFMS) event to
Microsemi Switchtec switch driver (Logan Gunthorpe)
- add IDs for Switchtec PSX 24xG3 and PSX 48xG3 (Kelvin Cao)
* tag 'pci-v4.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits)
PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller
dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe endpoint controller
PCI: endpoint: Fix EPF device name to support multi-function devices
PCI: endpoint: Add the function number as argument to EPC ops
PCI: cadence: Add host driver for Cadence PCIe controller
dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe host controller
PCI: Add vendor ID for Cadence
PCI: Add generic function to probe PCI host controllers
PCI: generic: fix missing call of pci_free_resource_list()
PCI: OF: Add generic function to parse and allocate PCI resources
PCI: Regroup all PCI related entries into drivers/pci/Makefile
PCI/DPC: Reformat DPC register definitions
PCI/DPC: Add and use DPC Status register field definitions
PCI/DPC: Squash dpc_rp_pio_get_info() into dpc_process_rp_pio_error()
PCI/DPC: Remove unnecessary RP PIO register structs
PCI/DPC: Push dpc->rp_pio_status assignment into dpc_rp_pio_get_info()
PCI/DPC: Squash dpc_rp_pio_print_error() into dpc_rp_pio_get_info()
PCI/DPC: Make RP PIO log size check more generic
PCI/DPC: Rename local "status" to "dpc_status"
PCI/DPC: Squash dpc_rp_pio_print_tlp_header() into dpc_rp_pio_print_error()
...
-----BEGIN PGP SIGNATURE-----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=pLN1
-----END PGP SIGNATURE-----
Merge tag 'drm-for-v4.16' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
"This seems to have been a comparatively quieter merge window, I assume
due to holidays etc. The "biggest" change is AMD header cleanups, which
merge/remove a bunch of them. The AMD gpu scheduler is now being made generic
with the etnaviv driver wanting to reuse the code, hopefully other drivers
can go in the same direction.
Otherwise it's the usual lots of stuff in i915/amdgpu, not so much stuff
elsewhere.
Core:
- Add .last_close and .output_poll_changed helpers to reduce driver footprints
- Fix plane clipping
- Improved debug printing support
- Add panel orientation property
- Update edid derived properties at edid setting
- Reduction in fbdev driver footprint
- Move amdgpu scheduler into core for other drivers to use.
i915:
- Selftest and IGT improvements
- Fast boot prep work on IPS, pipe config
- HW workarounds for Cannonlake, Geminilake
- Cannonlake clock and HDMI2.0 fixes
- GPU cache invalidation and context switch improvements
- Display planes cleanup
- New PMU interface for perf queries
- New firmware support for KBL/SKL
- Geminilake HW workaround for perforamce
- Coffeelake stolen memory improvements
- GPU reset robustness work
- Cannonlake horizontal plane flipping
- GVT work
amdgpu/radeon:
- RV and Vega header file cleanups (lots of lines gone!)
- TTM operation context support
- 48-bit GPUVM support for Vega/RV
- ECC support for Vega
- Resizeable BAR support
- Multi-display sync support
- Enable swapout for reserved BOs during allocation
- S3 fixes on Raven
- GPU reset cleanup and fixes
- 2+1 level GPU page table
amdkfd:
- GFX7/8 SDMA user queues support
- Hardware scheduling for multiple processes
- dGPU prep work
rcar:
- Added R8A7743/5 support
- System suspend/resume support
sun4i:
- Multi-plane support for YUV formats
- A83T and LVDS support
msm:
- Devfreq support for GPU
tegra:
- Prep work for adding Tegra186 support
- Tegra186 HDMI support
- HDMI2.0 and zpos support by using generic helpers
tilcdc:
- Misc fixes
omapdrm:
- Support memory bandwidth limits
- DSI command mode panel cleanups
- DMM error handling
exynos:
- drop the old IPP subdriver.
etnaviv:
- Occlusion query fixes
- Job handling fixes
- Prep work for hooking in gpu scheduler
armada:
- Move closer to atomic modesetting
- Allow disabling primary plane if overlay is full screen
imx:
- Format modifier support
- Add tile prefetch to PRE
- Runtime PM support for PRG
ast:
- fix LUT loading"
* tag 'drm-for-v4.16' of git://people.freedesktop.org/~airlied/linux: (1471 commits)
drm/ast: Load lut in crtc_commit
drm: Check for lessee in DROP_MASTER ioctl
drm: fix gpu scheduler link order
drm/amd/display: Demote error print to debug print when ATOM impl missing
dma-buf: fix reservation_object_wait_timeout_rcu once more v2
drm/amdgpu: Avoid leaking PM domain on driver unbind (v2)
drm/amd/amdgpu: Add Polaris version check
drm/amdgpu: Reenable manual GPU reset from sysfs
drm/amdgpu: disable MMHUB power gating on raven
drm/ttm: Don't unreserve swapped BOs that were previously reserved
drm/ttm: Don't add swapped BOs to swap-LRU list
drm/amdgpu: only check for ECC on Vega10
drm/amd/powerplay: Fix smu_table_entry.handle type
drm/ttm: add VADDR_FLAG_UPDATED_COUNT to correctly update dma_page global count
drm: Fix PANEL_ORIENTATION_QUIRKS breaking the Kconfig DRM menuconfig
drm/radeon: fill in rb backend map on evergreen/ni.
drm/amdgpu/gfx9: fix ngg enablement to clear gds reserved memory (v2)
drm/ttm: only free pages rather than update global memory count together
drm/amdgpu: fix CPU based VM updates
drm/amdgpu: fix typo in amdgpu_vce_validate_bo
...
Here is the big pull request for char/misc drivers for 4.16-rc1.
There's a lot of stuff in here. Three new driver subsystems were added
for various types of hardware busses:
- siox
- slimbus
- soundwire
as well as a new vboxguest subsystem for the VirtualBox hypervisor
drivers.
There's also big updates from the FPGA subsystem, lots of Android binder
fixes, the usual handful of hyper-v updates, and lots of other smaller
driver updates.
All of these have been in linux-next for a long time, with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWnLuZw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynS4QCcCrPmwfD5PJwaF+q2dPfyKaflkQMAn0x6Wd+u
Gw3Z2scgjETUpwJ9ilnL
=xcQ0
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big pull request for char/misc drivers for 4.16-rc1.
There's a lot of stuff in here. Three new driver subsystems were added
for various types of hardware busses:
- siox
- slimbus
- soundwire
as well as a new vboxguest subsystem for the VirtualBox hypervisor
drivers.
There's also big updates from the FPGA subsystem, lots of Android
binder fixes, the usual handful of hyper-v updates, and lots of other
smaller driver updates.
All of these have been in linux-next for a long time, with no reported
issues"
* tag 'char-misc-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (155 commits)
char: lp: use true or false for boolean values
android: binder: use VM_ALLOC to get vm area
android: binder: Use true and false for boolean values
lkdtm: fix handle_irq_event symbol for INT_HW_IRQ_EN
EISA: Delete error message for a failed memory allocation in eisa_probe()
EISA: Whitespace cleanup
misc: remove AVR32 dependencies
virt: vbox: Add error mapping for VERR_INVALID_NAME and VERR_NO_MORE_FILES
soundwire: Fix a signedness bug
uio_hv_generic: fix new type mismatch warnings
uio_hv_generic: fix type mismatch warnings
auxdisplay: img-ascii-lcd: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE
uio_hv_generic: add rescind support
uio_hv_generic: check that host supports monitor page
uio_hv_generic: create send and receive buffers
uio: document uio_hv_generic regions
doc: fix documentation about uio_hv_generic
vmbus: add monitor_id and subchannel_id to sysfs per channel
vmbus: fix ABI documentation
uio_hv_generic: use ISR callback method
...
Here is the set of "big" driver core patches for 4.16-rc1.
The majority of the work here is in the firmware subsystem, with reworks
to try to attempt to make the code easier to handle in the long run, but
no functional change. There's also some tree-wide sysfs attribute
fixups with lots of acks from the various subsystem maintainers, as well
as a handful of other normal fixes and changes.
And finally, some license cleanups for the driver core and sysfs code.
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWnLvPw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynNzACgkzjPoBytJWbpWFt6SR6L33/u4kEAnRFvVCGL
s6ygQPQhZIjKk2Lxa2hC
=Zihy
-----END PGP SIGNATURE-----
Merge tag 'driver-core-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of "big" driver core patches for 4.16-rc1.
The majority of the work here is in the firmware subsystem, with
reworks to try to attempt to make the code easier to handle in the
long run, but no functional change. There's also some tree-wide sysfs
attribute fixups with lots of acks from the various subsystem
maintainers, as well as a handful of other normal fixes and changes.
And finally, some license cleanups for the driver core and sysfs code.
All have been in linux-next for a while with no reported issues"
* tag 'driver-core-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (48 commits)
device property: Define type of PROPERTY_ENRTY_*() macros
device property: Reuse property_entry_free_data()
device property: Move property_entry_free_data() upper
firmware: Fix up docs referring to FIRMWARE_IN_KERNEL
firmware: Drop FIRMWARE_IN_KERNEL Kconfig option
USB: serial: keyspan: Drop firmware Kconfig options
sysfs: remove DEBUG defines
sysfs: use SPDX identifiers
drivers: base: add coredump driver ops
sysfs: add attribute specification for /sysfs/devices/.../coredump
test_firmware: fix missing unlock on error in config_num_requests_store()
test_firmware: make local symbol test_fw_config static
sysfs: turn WARN() into pr_warn()
firmware: Fix a typo in fallback-mechanisms.rst
treewide: Use DEVICE_ATTR_WO
treewide: Use DEVICE_ATTR_RO
treewide: Use DEVICE_ATTR_RW
sysfs.h: Use octal permissions
component: add debugfs support
bus: simple-pm-bus: convert bool SIMPLE_PM_BUS to tristate
...
Pull crypto updates from Herbert Xu:
"API:
- Enforce the setting of keys for keyed aead/hash/skcipher
algorithms.
- Add multibuf speed tests in tcrypt.
Algorithms:
- Improve performance of sha3-generic.
- Add native sha512 support on arm64.
- Add v8.2 Crypto Extentions version of sha3/sm3 on arm64.
- Avoid hmac nesting by requiring underlying algorithm to be unkeyed.
- Add cryptd_max_cpu_qlen module parameter to cryptd.
Drivers:
- Add support for EIP97 engine in inside-secure.
- Add inline IPsec support to chelsio.
- Add RevB core support to crypto4xx.
- Fix AEAD ICV check in crypto4xx.
- Add stm32 crypto driver.
- Add support for BCM63xx platforms in bcm2835 and remove bcm63xx.
- Add Derived Key Protocol (DKP) support in caam.
- Add Samsung Exynos True RNG driver.
- Add support for Exynos5250+ SoCs in exynos PRNG driver"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (166 commits)
crypto: picoxcell - Fix error handling in spacc_probe()
crypto: arm64/sha512 - fix/improve new v8.2 Crypto Extensions code
crypto: arm64/sm3 - new v8.2 Crypto Extensions implementation
crypto: arm64/sha3 - new v8.2 Crypto Extensions implementation
crypto: testmgr - add new testcases for sha3
crypto: sha3-generic - export init/update/final routines
crypto: sha3-generic - simplify code
crypto: sha3-generic - rewrite KECCAK transform to help the compiler optimize
crypto: sha3-generic - fixes for alignment and big endian operation
crypto: aesni - handle zero length dst buffer
crypto: artpec6 - remove select on non-existing CRYPTO_SHA384
hwrng: bcm2835 - Remove redundant dev_err call in bcm2835_rng_probe()
crypto: stm32 - remove redundant dev_err call in stm32_cryp_probe()
crypto: axis - remove unnecessary platform_get_resource() error check
crypto: testmgr - test misuse of result in ahash
crypto: inside-secure - make function safexcel_try_push_requests static
crypto: aes-generic - fix aes-generic regression on powerpc
crypto: chelsio - Fix indentation warning
crypto: arm64/sha1-ce - get rid of literal pool
crypto: arm64/sha2-ce - move the round constant table to .rodata section
...
Pull tpm updates from James Morris:
- reduce polling delays in tpm_tis
- support retrieving TPM 2.0 Event Log through EFI before
ExitBootServices
- replace tpm-rng.c with a hwrng device managed by the driver for each
TPM device
- TPM resource manager synthesizes TPM_RC_COMMAND_CODE response instead
of returning -EINVAL for unknown TPM commands. This makes user space
more sound.
- CLKRUN fixes:
* Keep #CLKRUN disable through the entier TPM command/response flow
* Check whether #CLKRUN is enabled before disabling and enabling it
again because enabling it breaks PS/2 devices on a system where it
is disabled
* 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
tpm: remove unused variables
tpm: remove unused data fields from I2C and OF device ID tables
tpm: only attempt to disable the LPC CLKRUN if is already enabled
tpm: follow coding style for variable declaration in tpm_tis_core_init()
tpm: delete the TPM_TIS_CLK_ENABLE flag
tpm: Update MAINTAINERS for Jason Gunthorpe
tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd()
tpm_tis: Move ilb_base_addr to tpm_tis_data
tpm2-cmd: allow more attempts for selftest execution
tpm: return a TPM_RC_COMMAND_CODE response if command is not implemented
tpm: Move Linux RNG connection to hwrng
tpm: use struct tpm_chip for tpm_chip_find_get()
tpm: parse TPM event logs based on EFI table
efi: call get_event_log before ExitBootServices
tpm: add event log format version
tpm: rename event log provider files
tpm: move tpm_eventlog.h outside of drivers folder
tpm: use tpm_msleep() value as max delay
tpm: reduce tpm polling delay in tpm_tis_core
tpm: move wait_for_tpm_stat() to respective driver files
while (some a long time).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=cnx5
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.16-1' of git://github.com/cminyard/linux-ipmi
Pull IPMI updates from Corey Minyard:
"Small fixes for various things, been sitting in next for a while (some
a long time)"
* tag 'for-linus-4.16-1' of git://github.com/cminyard/linux-ipmi:
ipmi_ssif: Remove duplicate NULL check
ipmi/powernv: Fix error return code in ipmi_powernv_probe()
ipmi: use dynamic memory for DMI driver override
ipmi/ipmi_powernv: remove outdated todo in powernv IPMI driver
ipmi: Clear smi_info->thread to prevent use-after-free during module unload
ipmi: use correct string length
ipmi_si: Fix error handling of platform device
ipmi watchdog: fix typo in parameter description
ipmi_si_platform: Fix typo in parameter description
Pull poll annotations from Al Viro:
"This introduces a __bitwise type for POLL### bitmap, and propagates
the annotations through the tree. Most of that stuff is as simple as
'make ->poll() instances return __poll_t and do the same to local
variables used to hold the future return value'.
Some of the obvious brainos found in process are fixed (e.g. POLLIN
misspelled as POLL_IN). At that point the amount of sparse warnings is
low and most of them are for genuine bugs - e.g. ->poll() instance
deciding to return -EINVAL instead of a bitmap. I hadn't touched those
in this series - it's large enough as it is.
Another problem it has caught was eventpoll() ABI mess; select.c and
eventpoll.c assumed that corresponding POLL### and EPOLL### were
equal. That's true for some, but not all of them - EPOLL### are
arch-independent, but POLL### are not.
The last commit in this series separates userland POLL### values from
the (now arch-independent) kernel-side ones, converting between them
in the few places where they are copied to/from userland. AFAICS, this
is the least disruptive fix preserving poll(2) ABI and making epoll()
work on all architectures.
As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and
it will trigger only on what would've triggered EPOLLWRBAND on other
architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered
at all on sparc. With this patch they should work consistently on all
architectures"
* 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits)
make kernel-side POLL... arch-independent
eventpoll: no need to mask the result of epi_item_poll() again
eventpoll: constify struct epoll_event pointers
debugging printk in sg_poll() uses %x to print POLL... bitmap
annotate poll(2) guts
9p: untangle ->poll() mess
->si_band gets POLL... bitmap stored into a user-visible long field
ring_buffer_poll_wait() return value used as return value of ->poll()
the rest of drivers/*: annotate ->poll() instances
media: annotate ->poll() instances
fs: annotate ->poll() instances
ipc, kernel, mm: annotate ->poll() instances
net: annotate ->poll() instances
apparmor: annotate ->poll() instances
tomoyo: annotate ->poll() instances
sound: annotate ->poll() instances
acpi: annotate ->poll() instances
crypto: annotate ->poll() instances
block: annotate ->poll() instances
x86: annotate ->poll() instances
...
There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Assign true or false to boolean variables instead of an integer value.
This issue was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since i2c_unregister_device() became NULL-aware we may remove duplicate
NULL check.
Cc: Corey Minyard <minyard@acm.org>
Cc: openipmi-developer@lists.sourceforge.net
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Fix to return a negative error code from the request_irq() error
handling case instead of 0, as done elsewhere in this function.
Fixes: dce143c338 ("ipmi/powernv: Convert to irq event interface")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Use the SIMPLE_DEV_PM_OPS() macro instead of populating a struct
dev_pm_ops directly. The suspend and resume functions will now be used
for both hibernation and suspend to ram.
If power management is disabled, SIMPLE_DEV_PM_OPS() evaluates to
nothing, The two functions won't be used and won't be included in the
kernel. Mark them as __maybe_unused to clarify that this is intended
behaviour.
With these modifications in place, we don't need the #ifdefs for power
management any more.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Łukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
"val" needs to be signed for the error handling to work.
Fixes: 6cd225cc5d ("hwrng: exynos - add Samsung Exynos True RNG driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Łukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When hw_random device's quality is non-zero, it will automatically fill
the kernel's entropy pool at boot. For the purpose, one conservative
quality value is being picked up as the default value.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since the IPMI core now queries device IDs dynamically, we no longer
need this todo for implementing this in the powernv driver.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
During code inspection, I found an use-after-free possibility during unloading
ipmi_si in the polling mode.
If start_new_msg() is called after kthread_stop(), the function will try to
wake up non-existing kthread using the dangling pointer.
Possible scenario is when a new internal message is generated after
ipmi_unregister_smi()[*1] and remains after stop_timer_and_thread()
in clenaup_one_si() [*2].
Use-after-free could occur as follows depending on BMC replies.
cleanup_one_si
=> ipmi_unregister_smi
[*1]
=> stop_timer_and_thread
=> kthread_stop(smi_info->thread)
[*2]
=> poll
=> smi_event_handler
=> start_new_msg
=> if (smi_info->thread)
wake_up_process(smi_info->thread) <== use-after-free!!
Although currently it seems no such message is generated in the polling mode,
some changes might introduce that in thefuture. For example in the interrupt
mode, disable_si_irq() does that at [*2].
So let's prevent such a critical issue possibility now.
Signed-off-by: Yamazaki Masamitsu <m-yamazaki@ah.jp.nec.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.
Getting ready to remove pci_get_bus_and_slot() function in favor of
pci_get_domain_bus_and_slot().
Replace pci_get_bus_and_slot() with pci_get_domain_bus_and_slot()
and extract the domain number from struct pci_dev.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.
Getting ready to remove pci_get_bus_and_slot() function in favor of
pci_get_domain_bus_and_slot().
Replace pci_get_bus_and_slot() with pci_get_domain_bus_and_slot()
and extract the domain number from struct pci_dev.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
Drivers generally should not need to depend directly on OF_ADDRESS or
OF_IRQ. Convert xillybus to use the preferred platform_get_resource() and
platform_get_irq() functions to remove this dependency.
Cc: Eli Billauer <eli.billauer@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gcc-8 reports
drivers/char/ipmi/ipmi_msghandler.c: In function
'panic_op_write_handler':
./include/linux/string.h:245:9: warning: '__builtin_strncpy' specified
bound 16 equals destination size [-Wstringop-truncation]
drivers/char/ipmi/ipmi_watchdog.c: In function 'set_param_str':
./include/linux/string.h:245:9: warning: '__builtin_strncpy' specified
bound 16 equals destination size [-Wstringop-truncation]
We need one less byte or call strlcpy() to make it a nul-terminated
string.
Signed-off-by: Xiongfeng Wang <xiongfeng.wang@linaro.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The CLKRUN fix caused a few harmless compile-time warnings:
drivers/char/tpm/tpm_tis.c: In function 'tpm_tis_pnp_remove':
drivers/char/tpm/tpm_tis.c:274:23: error: unused variable 'priv' [-Werror=unused-variable]
drivers/char/tpm/tpm_tis.c: In function 'tpm_tis_plat_remove':
drivers/char/tpm/tpm_tis.c:324:23: error: unused variable 'priv' [-Werror=unused-variable]
This removes the variables that have now become unused.
Fixes: 6d0866cbc2d3 ("tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: James Morris <jmorris@namei.org>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The data field for the entries in the device tables are set but not used.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@ziepe.ca>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Commit 5e572cab92 ("tpm: Enable CLKRUN protocol for Braswell systems")
added logic in the TPM TIS driver to disable the Low Pin Count CLKRUN
signal during TPM transactions.
Unfortunately this breaks other devices that are attached to the LPC bus
like for example PS/2 mouse and keyboards.
One flaw with the logic is that it assumes that the CLKRUN is always
enabled, and so it unconditionally enables it after a TPM transaction.
But it could be that the CLKRUN# signal was already disabled in the LPC
bus and so after the driver probes, CLKRUN_EN will remain enabled which
may break other devices that are attached to the LPC bus but don't have
support for the CLKRUN protocol.
Fixes: 5e572cab92 ("tpm: Enable CLKRUN protocol for Braswell systems")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: James Ettle <james@ettle.org.uk>
Tested-by: Jeffery Miller <jmiller@neverware.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The coding style says "use just one data declaration per line (no commas
for multiple data declarations)" so follow this convention.
Suggested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
This flag is only used to warn if CLKRUN_EN wasn't disabled on Braswell
systems, but the only way this can happen is if the code is not correct.
So it's an unnecessary check that just makes the code harder to read.
Suggested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Commit 5e572cab92 ("tpm: Enable CLKRUN protocol for Braswell
systems") disabled CLKRUN protocol during TPM transactions and re-enabled
once the transaction is completed. But there were still some corner cases
observed where, reading of TPM header failed for savestate command
while going to suspend, which resulted in suspend failure.
To fix this issue keep the CLKRUN protocol disabled for the entire
duration of a single TPM command and not disabling and re-enabling
again for every TPM transaction. For the other TPM accesses outside
TPM command flow, add a higher level of disabling and re-enabling
the CLKRUN protocol, instead of doing for every TPM transaction.
Fixes: 5e572cab92 ("tpm: Enable CLKRUN protocol for Braswell systems")
Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Previously, if the last attempt to execute the selftest command failed with
RC_TESTING, there was still a call to tpm_msleep, even though no further
attempt would be made. This causes an unnecessary delay, therefore ensure
that if the last attempt fails the function is left immediately.
Also, instead of ensuring that the cumulated runtime of all attempts is
larger than the command duration for TPM2_SelfTest, ensure that there is at
least one attempt for which the delay is larger than the expected command
duration. This allows slow TPMs to execute all their tests in the
background, without slowing down faster TPMs that have finished their tests
earlier. If tests are still not finished even with this long delay, then
something is broken and the TPM is not used.
Fixes: 125a221054 ("tpm: React correctly to RC_TESTING from TPM 2.0 self
tests")
Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
According to the TPM Library Specification, a TPM device must do a command
header validation before processing and return a TPM_RC_COMMAND_CODE code
if the command is not implemented.
So user-space will expect to handle that response as an error. But if the
in-kernel resource manager is used (/dev/tpmrm?), an -EINVAL errno code is
returned instead if the command isn't implemented. This confuses userspace
since it doesn't expect that error value.
This also isn't consistent with the behavior when not using TPM spaces and
accessing the TPM directly (/dev/tpm?). In this case, the command is sent
to the TPM even when not implemented and the TPM responds with an error.
Instead of returning an -EINVAL errno code when the tpm_validate_command()
function fails, synthesize a TPM command response so user-space can get a
TPM_RC_COMMAND_CODE as expected when a chip doesn't implement the command.
The TPM only sets 12 of the 32 bits in the TPM_RC response, so the TSS and
TAB specifications define that higher layers in the stack should use some
of the unused 20 bits to specify from which level of the stack the error
is coming from.
Since the TPM_RC_COMMAND_CODE response code is sent by the kernel resource
manager, set the error level to the TAB/RM layer so user-space is aware of
this.
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: William Roberts <william.c.roberts@intel.com>
Reviewed-by: Philip Tricca <philip.b.tricca@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The tpm-rng.c approach is completely inconsistent with how the kernel
handles hotplug. Instead manage a hwrng device for each TPM. This will
cause the kernel to read entropy from the TPM when it is plugged in, and
allow access to the TPM rng via /dev/hwrng.
Signed-off-by: Jason Gunthorpe <jgg@ziepe.ca>
Tested-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Device number (the character device index) is not a stable identifier
for a TPM chip. That is the reason why every call site passes
TPM_ANY_NUM to tpm_chip_find_get().
This commit changes the API in a way that instead a struct tpm_chip
instance is given and NULL means the default chip. In addition, this
commit refines the documentation to be up to date with the
implementation.
Suggested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> (@chip_num -> @chip part)
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@ziepe.ca>
Tested-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
If we are not able to retrieve the TPM event logs from the ACPI table,
check the EFI configuration table (Linux-specific GUID).
The format version of the log is now returned by the provider function.
Signed-off-by: Thiebaud Weksteen <tweek@google.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Rename the current TPM Event Log provider files (ACPI and OF)
for clarity.
Signed-off-by: Thiebaud Weksteen <tweek@google.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The generic definitions of data structures in tpm_eventlog.h are
required by other part of the kernel (namely, the EFI stub).
Signed-off-by: Thiebaud Weksteen <tweek@google.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Currently, tpm_msleep() uses delay_msec as the minimum value in
usleep_range. However, that is the maximum time we want to wait.
The function is modified to use the delay_msec as the maximum
value, not the minimum value.
After this change, performance on a TPM 1.2 with an 8 byte
burstcount for 1000 extends improved from ~9sec to ~8sec.
Fixes: 3b9af007869("tpm: replace msleep() with usleep_range() in TPM 1.2/
2.0 generic drivers")
Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The existing wait_for_tpm_stat() polls for the chip status after
5msec sleep. As per TCG ddwg input, it is expected that tpm might
return status in few usec. So, reducing the delay in polling to
1msec.
Similarly, get_burstcount() function sleeps for 5msec before
retrying for next query to burstcount in a loop. If it takes
lesser time for TPM to return, this 5msec delay is longer than
necessary.
After this change, performance on a TPM 1.2 with an 8 byte
burstcount for 1000 extends improved from ~14sec to ~9sec.
Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Add support for True Random Number Generator found in Samsung Exynos
5250+ SoCs.
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit 142a27f0a7 added support for a "best" RNG, and in doing so
introduced a hang from rmmod/modprobe -r when the last RNG on the list
was unloaded.
When the hwrng list is depleted, return the global variables to their
original state and decrement all references to the object.
Fixes: 142a27f0a7 ("hwrng: core - Reset user selected rng by writing "" to rng_current")
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
- Fix timestamp frequency calculation for perf on CNL (Lionel)
- New DMC firmware for Skylake (Anusha)
- GTT flush fixes and other GGTT write track and refactors (Chris)
- Taint kernel when GPU reset fails (Chris)
- Display workarounds organization (Lucas)
- GuC and HuC initialization clean-up and fixes (Michal)
- Other fixes around GuC submission (Michal)
- Execlist clean-ups like caching ELSP reg offset and improving log readability (Chri\
s)
- Many other improvements on our logs and dumps (Chris)
- Restore GT performance in headless mode with DMC loaded (Tvrtko)
- Stop updating legacy fb parameters since FBC is not using anymore (Daniel)
- More selftest improvements (Chris)
- Preemption fixes and improvements (Chris)
- x86/early-quirks improvements for Intel graphics stolen memory. (Joonas, Matthew)
- Other improvements on Stolen Memory code to be resource centric. (Matthew)
- Improvements and fixes on fence allocation/release (Chris).
GVT:
- fixes for two coverity scan errors (Colin)
- mmio switch code refine (Changbin)
- more virtual display dmabuf fixes (Tina/Gustavo)
- misc cleanups (Pei)
- VFIO mdev display dmabuf interface and gvt support (Tina)
- VFIO mdev opregion support/fixes (Tina/Xiong/Chris)
- workload scheduling optimization (Changbin)
- preemption fix and temporal workaround (Zhenyu)
- and misc fixes after refactor (Chris)
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJaMttwAAoJEPpiX2QO6xPK/sgH/3fydh/e++QHMgh4I3Gc18wp
yxxXJLt5i/SldGpv0yTlq1jvZ68R2H5K9fyfeDMrZSszCpZceU5uQZjtSWLpSo8d
N8nccZ1fEEBMyqvWPdL5tM+9z7YpbJJ0gXHYl1ONV5WttXQ2xsxo/fZTMRpTNpGF
WyxGGqEg2eSkdwLlYNqKHB175ssQnxOOtBA6htaMMwyq12GpyztGB4Dy18fHswjL
lqGqUMXuHBLEqI6t7MVa/LyHn1YpE6Q1VXhesBz7htGO0MYIFniI1KKjHRPX+OTC
DXvzBIq6tMi7osJbCUFriu4F0Ko9h4iZOYJI1a9iwADoIIw6Y2xlzFidKd0Zp0I=
=XwCl
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2017-12-14' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Fix documentation build issues (Randy, Markus)
- Fix timestamp frequency calculation for perf on CNL (Lionel)
- New DMC firmware for Skylake (Anusha)
- GTT flush fixes and other GGTT write track and refactors (Chris)
- Taint kernel when GPU reset fails (Chris)
- Display workarounds organization (Lucas)
- GuC and HuC initialization clean-up and fixes (Michal)
- Other fixes around GuC submission (Michal)
- Execlist clean-ups like caching ELSP reg offset and improving log readability (Chri\
s)
- Many other improvements on our logs and dumps (Chris)
- Restore GT performance in headless mode with DMC loaded (Tvrtko)
- Stop updating legacy fb parameters since FBC is not using anymore (Daniel)
- More selftest improvements (Chris)
- Preemption fixes and improvements (Chris)
- x86/early-quirks improvements for Intel graphics stolen memory. (Joonas, Matthew)
- Other improvements on Stolen Memory code to be resource centric. (Matthew)
- Improvements and fixes on fence allocation/release (Chris).
GVT:
- fixes for two coverity scan errors (Colin)
- mmio switch code refine (Changbin)
- more virtual display dmabuf fixes (Tina/Gustavo)
- misc cleanups (Pei)
- VFIO mdev display dmabuf interface and gvt support (Tina)
- VFIO mdev opregion support/fixes (Tina/Xiong/Chris)
- workload scheduling optimization (Changbin)
- preemption fix and temporal workaround (Zhenyu)
- and misc fixes after refactor (Chris)
* tag 'drm-intel-next-2017-12-14' of git://anongit.freedesktop.org/drm/drm-intel: (87 commits)
drm/i915: Update DRIVER_DATE to 20171214
drm/i915: properly init lockdep class
drm/i915: Show engine state when hangcheck detects a stall
drm/i915: make CS frequency read support missing more obvious
drm/i915/guc: Extract doorbell verification into a function
drm/i915/guc: Extract clients allocation to submission_init
drm/i915/guc: Extract doorbell creation from client allocation
drm/i915/guc: Call invalidate after changing the vfunc
drm/i915/guc: Extract guc_init from guc_init_hw
drm/i915/guc: Move GuC workqueue allocations outside of the mutex
drm/i915/guc: Move shared data allocation away from submission path
drm/i915: Unwind i915_gem_init() failure
drm/i915: Ratelimit request allocation under oom
drm/i915: Allow fence allocations to fail
drm/i915: Mark up potential allocation paths within i915_sw_fence as might_sleep
drm/i915: Don't check #active_requests from i915_gem_wait_for_idle()
drm/i915/fence: Use rcu to defer freeing of irq_work
drm/i915: Dump the engine state before declaring wedged from wait_for_engines()
drm/i915: Bump timeout for wait_for_engines()
drm/i915: Downgrade misleading "Memory usable" message
...
As done for /proc/kcore in
commit df04abfd18 ("fs/proc/kcore.c: Add bounce buffer for ktext data")
this adds a bounce buffer when reading memory via /dev/mem. This
is needed to allow kernel text memory to be read out when built with
CONFIG_HARDENED_USERCOPY (which refuses to read out kernel text) and
without CONFIG_STRICT_DEVMEM (which would have refused to read any RAM
contents at all).
Since this build configuration isn't common (most systems with
CONFIG_HARDENED_USERCOPY also have CONFIG_STRICT_DEVMEM), this also tries
to inform Kconfig about the recommended settings.
This patch is modified from Brad Spengler/PaX Team's changes to /dev/mem
code in the last public patch of grsecurity/PaX based on my understanding
of the code. Changes or omissions from the original code are mine and
don't reflect the original grsecurity/PaX code.
Reported-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Fixes: f5509cc18d ("mm: Hardened usercopy")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function wait_for_tpm_stat() is currently defined in
tpm-interface file. It is a hardware specific function used
only by tpm_tis and xen-tpmfront, so it is removed from
tpm-interface.c and defined in respective driver files.
Suggested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cleanup of platform devices created by the IPMI driver was not
being done correctly and could result in a memory leak. So
create a local boolean to know how to clean up those platform
devices.
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Fix typo in parameter description.
Fixes: 95e300c052 ("ipmi: Make the DMI probe into a generic platform probe")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Keeps things consistent now that we make use of struct resource. This
should keep us covered in case we ever get huge amounts of stolen
memory.
v2: bunch of missing conversions (Chris)
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211151822.20953-10-matthew.auld@intel.com
Now that we are using struct resource to track the stolen region, it is
more convenient if we track dsm in a resource as well.
v2: check range_overflow when writing to 32b registers (Chris)
pepper in some comments (Chris)
v3: refit i915_stolen_to_dma()
v4: kill ggtt->stolen_size
v5: some more polish
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211151822.20953-6-matthew.auld@intel.com
have been in for-next for a while, each since about their creation
date. I forgot the bugzilla reference on the second one (ipmi_si: Fix
oops with PCI devices) so I rebased to add that.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=3M4K
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.15-2' of git://github.com/cminyard/linux-ipmi
Pull IPMI fixes from Corey Minyard.
* tag 'for-linus-4.15-2' of git://github.com/cminyard/linux-ipmi:
ipmi_si: fix crash on parisc
ipmi_si: Fix oops with PCI devices
ipmi: Stop timers before cleaning up the module
This patch fixes ipmi crash on parisc introduced in the kernel 4.15-rc.
The pointer io.io_setup is not initialized and thus it causes crash in
try_smi_init when attempting to call new_smi->io.io_setup.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
When the IPMI PCI code was split out, some code was consolidated for
setting the io_setup field in the io structure. The PCI code needed
this set before registration to probe register spacing, though, so
restore the old code for that function.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=197999
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Meelis Roos <mroos@linux.ee>
Before accessing the GGTT we must flush the PTE writes and make them
visible to the chipset, or else the indirect access may end up in the
wrong page. In commit 3497971a71 ("agp/intel: Flush chipset writes
after updating a single PTE"), we noticed corruption of the uploads for
pwrite and for capturing GPU error states, but it was presumed that the
explicit calls to intel_gtt_chipset_flush() were sufficient for the
execbuffer path. However, we have not been flushing the chipset between
the PTE writes and access via the GTT itself.
For simplicity, do the flush after any PTE update rather than try and
batch the flushes on a just-in-time basis.
References: 3497971a71 ("agp/intel: Flush chipset writes after updating a single PTE")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171208214616.30147-1-chris@chris-wilson.co.uk
System may crash after unloading ipmi_si.ko module
because a timer may remain and fire after the module cleaned up resources.
cleanup_one_si() contains the following processing.
/*
* Make sure that interrupts, the timer and the thread are
* stopped and will not run again.
*/
if (to_clean->irq_cleanup)
to_clean->irq_cleanup(to_clean);
wait_for_timer_and_thread(to_clean);
/*
* Timeouts are stopped, now make sure the interrupts are off
* in the BMC. Note that timers and CPU interrupts are off,
* so no need for locks.
*/
while (to_clean->curr_msg || (to_clean->si_state != SI_NORMAL)) {
poll(to_clean);
schedule_timeout_uninterruptible(1);
}
si_state changes as following in the while loop calling poll(to_clean).
SI_GETTING_MESSAGES
=> SI_CHECKING_ENABLES
=> SI_SETTING_ENABLES
=> SI_GETTING_EVENTS
=> SI_NORMAL
As written in the code comments above,
timers are expected to stop before the polling loop and not to run again.
But the timer is set again in the following process
when si_state becomes SI_SETTING_ENABLES.
=> poll
=> smi_event_handler
=> handle_transaction_done
// smi_info->si_state == SI_SETTING_ENABLES
=> start_getting_events
=> start_new_msg
=> smi_mod_timer
=> mod_timer
As a result, before the timer set in start_new_msg() expires,
the polling loop may see si_state becoming SI_NORMAL
and the module clean-up finishes.
For example, hard LOCKUP and panic occurred as following.
smi_timeout was called after smi_event_handler,
kcs_event and hangs at port_inb()
trying to access I/O port after release.
[exception RIP: port_inb+19]
RIP: ffffffffc0473053 RSP: ffff88069fdc3d80 RFLAGS: 00000006
RAX: ffff8806800f8e00 RBX: ffff880682bd9400 RCX: 0000000000000000
RDX: 0000000000000ca3 RSI: 0000000000000ca3 RDI: ffff8806800f8e40
RBP: ffff88069fdc3d80 R8: ffffffff81d86dfc R9: ffffffff81e36426
R10: 00000000000509f0 R11: 0000000000100000 R12: 0000000000]:000000
R13: 0000000000000000 R14: 0000000000000246 R15: ffff8806800f8e00
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0000
--- <NMI exception stack> ---
To fix the problem I defined a flag, timer_can_start,
as member of struct smi_info.
The flag is enabled immediately after initializing the timer
and disabled immediately before waiting for timer deletion.
Fixes: 0cfec916e8 ("ipmi: Start the timer and thread on internal msgs")
Signed-off-by: Yamazaki Masamitsu <m-yamazaki@ah.jp.nec.com>
[Adjusted for recent changes in the driver.]
Signed-off-by: Corey Minyard <cminyard@mvista.com>
When chacha20_block() outputs the keystream block, it uses 'u32' stores
directly. However, the callers (crypto/chacha20_generic.c and
drivers/char/random.c) declare the keystream buffer as a 'u8' array,
which is not guaranteed to have the needed alignment.
Fix it by having both callers declare the keystream as a 'u32' array.
For now this is preferable to switching over to the unaligned access
macros because chacha20_block() is only being used in cases where we can
easily control the alignment (stack buffers).
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
bcm2835-rng is now capable of supporting the BCM63xx hardware, so remove
the driver which duplicates the same functionality.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We have now incorporated all necessary functionality for the BCM63xx
platforms to successfully migrate over bcm2835-rng, so add the final
bits: Kconfig selection and proper platform_device device type matching
to keep the same platform device name for registration to work.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Broadcom MIPS HW is always strapped to match the system-wide endian such
that all I/O access to this RNG block is done with the native CPU
endian, account for that.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In preparation for allowing BCM63xx to use this driver, we abstract I/O
accessors such that we can easily change those later on.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
One of the last steps before bcm63xx-rng can be eliminated is to manage
a clock during hwrng::init and hwrng::cleanup, so fetch it in the probe
function, and manage it during these two steps when valid.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The interrupt masking done for Northstart Plus and Northstar (BCM5301X)
is moved from being a function pointer mapped to of_device_id::data into
a proper part of the hwrng::init callback. While at it, we also make the
of_data be a proper structure indicating the platform specifics, since
the day we need to add a second type of platform information, we would
have to do that anyway.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that we have moved the RNG disabling into a hwrng::cleanup callback,
we can use the device managed registration operation and remove our
remove callback since it won't do anything necessary.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We should be disabling the RNG in a hwrng::cleanup callback if we are
not longer the system selected RNG, not wait until the device driver is
removed.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We should be moving the enabling of the HWRNG into a hwrng::init
callback since we can be disabled and enabled every time a different
hwrng is selected in the system.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of making hwrng::priv host the base register address, define a
driver private context, make it per platform device instance and pass it
down the different functions.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In preparation for consolidating bcm63xx-rng into bcm2835-rng, make sure
that we obtain the base register via platform_get_resource() since we
need to support the non-DT enabled MIPS-based BCM63xx DSL SoCs.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Once we get a glibc with 64-bit time_t, the LPSETTIMEOUT ioctl stops
working, since the command number and data structure no longer match.
To work around that, this introduces a new command number LPSETTIMEOUT_NEW
that is used whenever the modified user space evaluates the LPSETTIMEOUT
macro.
The trick we use is a bit convoluted but necessary: we cannot check for
any macros set by the C library in linux/lp.h, because this particular
header can be included before including sys/time.h. However, we can assume
that by the time that LPSETTIMEOUT is seen in the code, the definition
for 'timeval' and 'time_t' has been seen as well, so we can use the
sizeof() operator to determine whether we should use the old or the
new definition. We use the old one not only for traditional 32-bit user
space with 32-bit time_t, but also for all 64-bit architectures and x32,
which always use a 64-bit time_t, the new definition will be used only for
32-bit user space with 64-bit time_t, which also requires a newer kernel.
The compat_ioctl() handler now implements both commands, but has to
use a special case for existing x32 binaries. The native ioctl handler
now implements both command numbers on both 32-bit and 64-bit, though
the latter version use the same interpretation for both.
This is based on an earlier patch from Bamvor.
Cc: Bamvor Jian Zhang <bamv2005@gmail.com>
Link: http://www.spinics.net/lists/y2038/msg01162.html
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull misc x86 fixes from Ingo Molnar:
- topology enumeration fixes
- KASAN fix
- two entry fixes (not yet the big series related to KASLR)
- remove obsolete code
- instruction decoder fix
- better /dev/mem sanity checks, hopefully working better this time
- pkeys fixes
- two ACPI fixes
- 5-level paging related fixes
- UMIP fixes that should make application visible faults more debuggable
- boot fix for weird virtualization environment
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
x86/decoder: Add new TEST instruction pattern
x86/PCI: Remove unused HyperTransport interrupt support
x86/umip: Fix insn_get_code_seg_params()'s return value
x86/boot/KASLR: Remove unused variable
x86/entry/64: Add missing irqflags tracing to native_load_gs_index()
x86/mm/kasan: Don't use vmemmap_populate() to initialize shadow
x86/entry/64: Fix entry_SYSCALL_64_after_hwframe() IRQ tracing
x86/pkeys/selftests: Fix protection keys write() warning
x86/pkeys/selftests: Rename 'si_pkey' to 'siginfo_pkey'
x86/mpx/selftests: Fix up weird arrays
x86/pkeys: Update documentation about availability
x86/umip: Print a warning into the syslog if UMIP-protected instructions are used
x86/smpboot: Fix __max_logical_packages estimate
x86/topology: Avoid wasting 128k for package id array
perf/x86/intel/uncore: Cache logical pkg id in uncore driver
x86/acpi: Reduce code duplication in mp_override_legacy_irq()
x86/acpi: Handle SCI interrupts above legacy space gracefully
x86/boot: Fix boot failure when SMP MP-table is based at 0
x86/mm: Limit mmap() of /dev/mem to valid physical addresses
x86/selftests: Add test for mapping placement for 5-level paging
...
This changes all DEFINE_TIMER() callbacks to use a struct timer_list
pointer instead of unsigned long. Since the data argument has already been
removed, none of these callbacks are using their argument currently, so
this renames the argument to "unused".
Done using the following semantic patch:
@match_define_timer@
declarer name DEFINE_TIMER;
identifier _timer, _callback;
@@
DEFINE_TIMER(_timer, _callback);
@change_callback depends on match_define_timer@
identifier match_define_timer._callback;
type _origtype;
identifier _origarg;
@@
void
-_callback(_origtype _origarg)
+_callback(struct timer_list *unused)
{ ... }
Signed-off-by: Kees Cook <keescook@chromium.org>
Pull compat and uaccess updates from Al Viro:
- {get,put}_compat_sigset() series
- assorted compat ioctl stuff
- more set_fs() elimination
- a few more timespec64 conversions
- several removals of pointless access_ok() in places where it was
followed only by non-__ variants of primitives
* 'misc.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (24 commits)
coredump: call do_unlinkat directly instead of sys_unlink
fs: expose do_unlinkat for built-in callers
ext4: take handling of EXT4_IOC_GROUP_ADD into a helper, get rid of set_fs()
ipmi: get rid of pointless access_ok()
pi433: sanitize ioctl
cxlflash: get rid of pointless access_ok()
mtdchar: get rid of pointless access_ok()
r128: switch compat ioctls to drm_ioctl_kernel()
selection: get rid of field-by-field copyin
VT_RESIZEX: get rid of field-by-field copyin
i2c compat ioctls: move to ->compat_ioctl()
sched_rr_get_interval(): move compat to native, get rid of set_fs()
mips: switch to {get,put}_compat_sigset()
sparc: switch to {get,put}_compat_sigset()
s390: switch to {get,put}_compat_sigset()
ppc: switch to {get,put}_compat_sigset()
parisc: switch to {get,put}_compat_sigset()
get_compat_sigset()
get rid of {get,put}_compat_itimerspec()
io_getevents: Use timespec64 to represent timeouts
...
Here is the big set of char/misc and other driver subsystem patches for
4.15-rc1.
There are small changes all over here, hyperv driver updates, pcmcia
driver updates, w1 driver updats, vme driver updates, nvmem driver
updates, and lots of other little one-off driver updates as well. The
shortlog has the full details.
Note, there will be a merge conflict in drivers/misc/lkdtm_core.c when
merging to your tree as one lkdtm patch came in through the perf tree as
well as this one. The resolution is to take the const change that this
tree provides.
All of these have been in linux-next for quite a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWg2Lnw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymTUwCgwp46+I8yPlgDH8oe5TxyyJnpdHQAn1XW0i+a
sBi6WS87In5v1QO1Rgfc
=dH2a
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem patches
for 4.15-rc1.
There are small changes all over here, hyperv driver updates, pcmcia
driver updates, w1 driver updats, vme driver updates, nvmem driver
updates, and lots of other little one-off driver updates as well. The
shortlog has the full details.
All of these have been in linux-next for quite a while with no
reported issues"
* tag 'char-misc-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (90 commits)
VME: Return -EBUSY when DMA list in use
w1: keep balance of mutex locks and refcnts
MAINTAINERS: Update VME subsystem tree.
nvmem: sunxi-sid: add support for A64/H5's SID controller
nvmem: imx-ocotp: Update module description
nvmem: imx-ocotp: Enable i.MX7D OTP write support
nvmem: imx-ocotp: Add i.MX7D timing write clock setup support
nvmem: imx-ocotp: Move i.MX6 write clock setup to dedicated function
nvmem: imx-ocotp: Add support for banked OTP addressing
nvmem: imx-ocotp: Pass parameters via a struct
nvmem: imx-ocotp: Restrict OTP write to IMX6 processors
nvmem: uniphier: add UniPhier eFuse driver
dt-bindings: nvmem: add description for UniPhier eFuse
nvmem: set nvmem->owner to nvmem->dev->driver->owner if unset
nvmem: qfprom: fix different address space warnings of sparse
nvmem: mtk-efuse: fix different address space warnings of sparse
nvmem: mtk-efuse: use stack for nvmem_config instead of malloc'ing it
nvmem: imx-iim: use stack for nvmem_config instead of malloc'ing it
thunderbolt: tb: fix use after free in tb_activate_pcie_devices
MAINTAINERS: Add git tree for Thunderbolt development
...
One thing /dev/mem access APIs should verify is that there's no way
that excessively large pfn's can leak into the high bits of the
page table entry.
In particular, if people can use "very large physical page addresses"
through /dev/mem to set the bits past bit 58 - SOFTW4 and permission
key bits and NX bit, that could *really* confuse the kernel.
We had an earlier attempt:
ce56a86e2a ("x86/mm: Limit mmap() of /dev/mem to valid physical addresses")
... which turned out to be too restrictive (breaking mem=... bootups for example) and
had to be reverted in:
90edaac627 ("Revert "x86/mm: Limit mmap() of /dev/mem to valid physical addresses"")
This v2 attempt modifies the original patch and makes sure that mmap(/dev/mem)
limits the pfns so that it at least fits in the actual pteval_t architecturally:
- Make sure mmap_mem() actually validates that the offset fits in phys_addr_t
( This may be indirectly true due to some other check, but it's not
entirely obvious. )
- Change valid_mmap_phys_addr_range() to just use phys_addr_valid()
on the top byte
( Top byte is sufficient, because mmap_mem() has already checked that
it cannot wrap. )
- Add a few comments about what the valid_phys_addr_range() vs.
valid_mmap_phys_addr_range() difference is.
Signed-off-by: Craig Bergstrom <craigb@google.com>
[ Fixed the checks and added comments. ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[ Collected the discussion and patches into a commit. ]
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sander Eikelenboom <linux@eikelenboom.it>
Cc: Sean Young <sean@mess.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/CA+55aFyEcOMb657vWSmrM13OxmHxC-XxeBmNis=DwVvpJUOogQ@mail.gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Merge updates from Andrew Morton:
- a few misc bits
- ocfs2 updates
- almost all of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (131 commits)
memory hotplug: fix comments when adding section
mm: make alloc_node_mem_map a void call if we don't have CONFIG_FLAT_NODE_MEM_MAP
mm: simplify nodemask printing
mm,oom_reaper: remove pointless kthread_run() error check
mm/page_ext.c: check if page_ext is not prepared
writeback: remove unused function parameter
mm: do not rely on preempt_count in print_vma_addr
mm, sparse: do not swamp log with huge vmemmap allocation failures
mm/hmm: remove redundant variable align_end
mm/list_lru.c: mark expected switch fall-through
mm/shmem.c: mark expected switch fall-through
mm/page_alloc.c: broken deferred calculation
mm: don't warn about allocations which stall for too long
fs: fuse: account fuse_inode slab memory as reclaimable
mm, page_alloc: fix potential false positive in __zone_watermark_ok
mm: mlock: remove lru_add_drain_all()
mm, sysctl: make NUMA stats configurable
shmem: convert shmem_init_inodecache() to void
Unify migrate_pages and move_pages access checks
mm, pagevec: rename pagevec drained field
...
Patch series "kmemcheck: kill kmemcheck", v2.
As discussed at LSF/MM, kill kmemcheck.
KASan is a replacement that is able to work without the limitation of
kmemcheck (single CPU, slow). KASan is already upstream.
We are also not aware of any users of kmemcheck (or users who don't
consider KASan as a suitable replacement).
The only objection was that since KASAN wasn't supported by all GCC
versions provided by distros at that time we should hold off for 2
years, and try again.
Now that 2 years have passed, and all distros provide gcc that supports
KASAN, kill kmemcheck again for the very same reasons.
This patch (of 4):
Remove kmemcheck annotations, and calls to kmemcheck from the kernel.
[alexander.levin@verizon.com: correctly remove kmemcheck call from dma_map_sg_attrs]
Link: http://lkml.kernel.org/r/20171012192151.26531-1-alexander.levin@verizon.com
Link: http://lkml.kernel.org/r/20171007030159.22241-2-alexander.levin@verizon.com
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tim Hansen <devtimhansen@gmail.com>
Cc: Vegard Nossum <vegardno@ifi.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is signed by my new key (919BFF81), which is now signed by my
old key.
This is a fairly large rework of the IPMI code, along with a bunch
of smaller fixes. The major changes have been in the next tree for
a couple of months, so they should be good to do in.
- Some users had IPMI systems where the GUID of the IPMI controller
could change. So rescanning of the GUID was added. The naming of
some sysfs things was dependent on the GUID, however, so this
resulted in the sysfs interface code in IPMI changing to remove that
dependency and name the IPMI BMCs like other sysfs devices.
- The ipmi_si_intf.c code was fairly bloated with all the different
discovery methods (PCI, ACPI, SMBIOS, OF, platform, module parameters,
hot add). The structure of how the interfaces were added was redone
to make them more modular, then the individual methods were pulled
out into their own files.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=8zFf
-----END PGP SIGNATURE-----
Merge tag 'ipmi-for-4.15' of git://github.com/cminyard/linux-ipmi
Pull IPMI updates from Corey Minyard:
"This is a fairly large rework of the IPMI code, along with a bunch of
smaller fixes. The major changes have been in the next tree for a
couple of months, so they should be good to do in.
- Some users had IPMI systems where the GUID of the IPMI controller
could change. So rescanning of the GUID was added. The naming of
some sysfs things was dependent on the GUID, however, so this
resulted in the sysfs interface code in IPMI changing to remove
that dependency and name the IPMI BMCs like other sysfs devices.
- The ipmi_si_intf.c code was fairly bloated with all the different
discovery methods (PCI, ACPI, SMBIOS, OF, platform, module
parameters, hot add). The structure of how the interfaces were
added was redone to make them more modular, then the individual
methods were pulled out into their own files"
* tag 'ipmi-for-4.15' of git://github.com/cminyard/linux-ipmi: (48 commits)
ipmi_si: Delete an error message for a failed memory allocation in try_smi_init()
ipmi_si: fix memory leak on new_smi
ipmi: remove redundant initialization of bmc
ipmi: pr_err() strings should end with newlines
ipmi: Clean up some print operations
ipmi: Make the DMI probe into a generic platform probe
ipmi: Make the IPMI proc interface configurable
ipmi_ssif: Add device attrs for the things in proc
ipmi_si: Add device attrs for the things in proc
ipmi_si: remove ipmi_smi_alloc() function
ipmi_si: Move port and mem I/O handling to their own files
ipmi_si: Get rid of unused spacing and port fields
ipmi_si: Move PARISC handling to another file
ipmi_si: Move PCI setup to another file
ipmi_si: Move platform device handling to another file
ipmi_si: Move hardcode handling to a separate file.
ipmi_si: Move the hotmod handling to another file.
ipmi_si: Change ipmi_si_add_smi() to take just I/O info
ipmi_si: Move io setup into io structure
ipmi_si: Move irq setup handling into the io struct
...
Summary of modules changes for the 4.15 merge window:
- Treewide module_param_call() cleanup, fix up set/get function
prototype mismatches, from Kees Cook
- Minor code cleanups
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=c8vb
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module updates from Jessica Yu:
"Summary of modules changes for the 4.15 merge window:
- treewide module_param_call() cleanup, fix up set/get function
prototype mismatches, from Kees Cook
- minor code cleanups"
* tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: Do not paper over type mismatches in module_param_call()
treewide: Fix function prototypes for module_param_call()
module: Prepare to convert all module_param_call() prototypes
kernel/module: Delete an error message for a failed memory allocation in add_module_usage()
Pull crypto updates from Herbert Xu:
"Here is the crypto update for 4.15:
API:
- Disambiguate EBUSY when queueing crypto request by adding ENOSPC.
This change touches code outside the crypto API.
- Reset settings when empty string is written to rng_current.
Algorithms:
- Add OSCCA SM3 secure hash.
Drivers:
- Remove old mv_cesa driver (replaced by marvell/cesa).
- Enable rfc3686/ecb/cfb/ofb AES in crypto4xx.
- Add ccm/gcm AES in crypto4xx.
- Add support for BCM7278 in iproc-rng200.
- Add hash support on Exynos in s5p-sss.
- Fix fallback-induced error in vmx.
- Fix output IV in atmel-aes.
- Fix empty GCM hash in mediatek.
Others:
- Fix DoS potential in lib/mpi.
- Fix potential out-of-order issues with padata"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits)
lib/mpi: call cond_resched() from mpi_powm() loop
crypto: stm32/hash - Fix return issue on update
crypto: dh - Remove pointless checks for NULL 'p' and 'g'
crypto: qat - Clean up error handling in qat_dh_set_secret()
crypto: dh - Don't permit 'key' or 'g' size longer than 'p'
crypto: dh - Don't permit 'p' to be 0
crypto: dh - Fix double free of ctx->p
hwrng: iproc-rng200 - Add support for BCM7278
dt-bindings: rng: Document BCM7278 RNG200 compatible
crypto: chcr - Replace _manual_ swap with swap macro
crypto: marvell - Add a NULL entry at the end of mv_cesa_plat_id_table[]
hwrng: virtio - Virtio RNG devices need to be re-registered after suspend/resume
crypto: atmel - remove empty functions
crypto: ecdh - remove empty exit()
MAINTAINERS: update maintainer for qat
crypto: caam - remove unused param of ctx_map_to_sec4_sg()
crypto: caam - remove unneeded edesc zeroization
crypto: atmel-aes - Reset the controller before each use
crypto: atmel-aes - properly set IV after {en,de}crypt
hwrng: core - Reset user selected rng by writing "" to rng_current
...
Pull timer updates from Thomas Gleixner:
"Yet another big pile of changes:
- More year 2038 work from Arnd slowly reaching the point where we
need to think about the syscalls themself.
- A new timer function which allows to conditionally (re)arm a timer
only when it's either not running or the new expiry time is sooner
than the armed expiry time. This allows to use a single timer for
multiple timeout requirements w/o caring about the first expiry
time at the call site.
- A new NMI safe accessor to clock real time for the printk timestamp
work. Can be used by tracing, perf as well if required.
- A large number of timer setup conversions from Kees which got
collected here because either maintainers requested so or they
simply got ignored. As Kees pointed out already there are a few
trivial merge conflicts and some redundant commits which was
unavoidable due to the size of this conversion effort.
- Avoid a redundant iteration in the timer wheel softirq processing.
- Provide a mechanism to treat RTC implementations depending on their
hardware properties, i.e. don't inflict the write at the 0.5
seconds boundary which originates from the PC CMOS RTC to all RTCs.
No functional change as drivers need to be updated separately.
- The usual small updates to core code clocksource drivers. Nothing
really exciting"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits)
timers: Add a function to start/reduce a timer
pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday()
timer: Prepare to change all DEFINE_TIMER() callbacks
netfilter: ipvs: Convert timers to use timer_setup()
scsi: qla2xxx: Convert timers to use timer_setup()
block/aoe: discover_timer: Convert timers to use timer_setup()
ide: Convert timers to use timer_setup()
drbd: Convert timers to use timer_setup()
mailbox: Convert timers to use timer_setup()
crypto: Convert timers to use timer_setup()
drivers/pcmcia: omap1: Fix error in automated timer conversion
ARM: footbridge: Fix typo in timer conversion
drivers/sgi-xp: Convert timers to use timer_setup()
drivers/pcmcia: Convert timers to use timer_setup()
drivers/memstick: Convert timers to use timer_setup()
drivers/macintosh: Convert timers to use timer_setup()
hwrng/xgene-rng: Convert timers to use timer_setup()
auxdisplay: Convert timers to use timer_setup()
sparc/led: Convert timers to use timer_setup()
mips: ip22/32: Convert timers to use timer_setup()
...
Pull core locking updates from Ingo Molnar:
"The main changes in this cycle are:
- Another attempt at enabling cross-release lockdep dependency
tracking (automatically part of CONFIG_PROVE_LOCKING=y), this time
with better performance and fewer false positives. (Byungchul Park)
- Introduce lockdep_assert_irqs_enabled()/disabled() and convert
open-coded equivalents to lockdep variants. (Frederic Weisbecker)
- Add down_read_killable() and use it in the VFS's iterate_dir()
method. (Kirill Tkhai)
- Convert remaining uses of ACCESS_ONCE() to
READ_ONCE()/WRITE_ONCE(). Most of the conversion was Coccinelle
driven. (Mark Rutland, Paul E. McKenney)
- Get rid of lockless_dereference(), by strengthening Alpha atomics,
strengthening READ_ONCE() with smp_read_barrier_depends() and thus
being able to convert users of lockless_dereference() to
READ_ONCE(). (Will Deacon)
- Various micro-optimizations:
- better PV qspinlocks (Waiman Long),
- better x86 barriers (Michael S. Tsirkin)
- better x86 refcounts (Kees Cook)
- ... plus other fixes and enhancements. (Borislav Petkov, Juergen
Gross, Miguel Bernal Marin)"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits)
locking/x86: Use LOCK ADD for smp_mb() instead of MFENCE
rcu: Use lockdep to assert IRQs are disabled/enabled
netpoll: Use lockdep to assert IRQs are disabled/enabled
timers/posix-cpu-timers: Use lockdep to assert IRQs are disabled/enabled
sched/clock, sched/cputime: Use lockdep to assert IRQs are disabled/enabled
irq_work: Use lockdep to assert IRQs are disabled/enabled
irq/timings: Use lockdep to assert IRQs are disabled/enabled
perf/core: Use lockdep to assert IRQs are disabled/enabled
x86: Use lockdep to assert IRQs are disabled/enabled
smp/core: Use lockdep to assert IRQs are disabled/enabled
timers/hrtimer: Use lockdep to assert IRQs are disabled/enabled
timers/nohz: Use lockdep to assert IRQs are disabled/enabled
workqueue: Use lockdep to assert IRQs are disabled/enabled
irq/softirqs: Use lockdep to assert IRQs are disabled/enabled
locking/lockdep: Add IRQs disabled/enabled assertion APIs: lockdep_assert_irqs_enabled()/disabled()
locking/pvqspinlock: Implement hybrid PV queued/unfair locks
locking/rwlocks: Fix comments
x86/paravirt: Set up the virt_spin_lock_key after static keys get initialized
block, locking/lockdep: Assign a lock_class per gendisk used for wait_for_completion()
workqueue: Remove now redundant lock acquisitions wrt. workqueue flushes
...
Pull general security subsystem updates from James Morris:
"TPM (from Jarkko):
- essential clean up for tpm_crb so that ARM64 and x86 versions do
not distract each other as much as before
- /dev/tpm0 rejects now too short writes (shorter buffer than
specified in the command header
- use DMA-safe buffer in tpm_tis_spi
- otherwise mostly minor fixes.
Smack:
- base support for overlafs
Capabilities:
- BPRM_FCAPS fixes, from Richard Guy Briggs:
The audit subsystem is adding a BPRM_FCAPS record when auditing
setuid application execution (SYSCALL execve). This is not expected
as it was supposed to be limited to when the file system actually
had capabilities in an extended attribute. It lists all
capabilities making the event really ugly to parse what is
happening. The PATH record correctly records the setuid bit and
owner. Suppress the BPRM_FCAPS record on set*id.
TOMOYO:
- Y2038 timestamping fixes"
* 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (28 commits)
MAINTAINERS: update the IMA, EVM, trusted-keys, encrypted-keys entries
Smack: Base support for overlayfs
MAINTAINERS: remove David Safford as maintainer for encrypted+trusted keys
tomoyo: fix timestamping for y2038
capabilities: audit log other surprising conditions
capabilities: fix logic for effective root or real root
capabilities: invert logic for clarity
capabilities: remove a layer of conditional logic
capabilities: move audit log decision to function
capabilities: use intuitive names for id changes
capabilities: use root_priveleged inline to clarify logic
capabilities: rename has_cap to has_fcap
capabilities: intuitive names for cap gain status
capabilities: factor out cap_bprm_set_creds privileged root
tpm, tpm_tis: use ARRAY_SIZE() to define TPM_HID_USR_IDX
tpm: fix duplicate inline declaration specifier
tpm: fix type of a local variables in tpm_tis_spi.c
tpm: fix type of a local variable in tpm2_map_command()
tpm: fix type of a local variable in tpm2_get_cc_attrs_tbl()
tpm-dev-common: Reject too short writes
...
BCM7278 features a RNG200 hardware random number generator block, add
support for this chip by matching the chip-specific compatible string
and extending the Kconfig dependencies to allow building on ARCH_BRCMSTB
(base platform for 7278).
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The patch for
commit: 5c06273401
Author: Amit Shah <amit.shah@redhat.com>
Date: Sun Jul 27 07:34:01 2014 +0930
virtio: rng: delay hwrng_register() till driver is ready
moved the call to hwrng_register() out of the probe routine into the scan
routine. We need to call hwrng_register() after a suspend/restore cycle
to re-register the device, but the scan function is not invoked for the
restore. Add the call to hwrng_register() to virtio_restore().
Reviewed-by: Liam Merwick <Liam.Merwick@oracle.com>
Signed-off-by: Jim Quigley <Jim.Quigley@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
User is able to select a chosen rng by writing its name to rng_current
but there is no way to reset it without unbinding the rng. Let user
write "" to rng_current and delesect the chosen rng.
Signed-off-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
reviewed-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: Matt Mackall <mpm@selenic.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZ0WQ6AAoJEHm+PkMAQRiGuloH/3sF4qfBhPuJo8OTf0uCtQ18
4Ux9zZbm81df/Jjz0exAp1Jqk+TvdIS3OXPWcKilvbUBP16hQcsxFTnI/5QF+YcN
87aNr+OCMJzOBK4suN1yhzO46NYHeIizdB0PTZVL1Zsto69Tt31D8VJmgH6oBxAw
Isb/nAkOr31dZ9PI5UEExTIanUt6EywVb0UswA+2rNl3h1UkeasQCpMpK2n6HBhU
kVD7sxEd/CN0MmfhB0HrySSam/BeSpOtzoU9bemOwrU2uu9+5+2rqMe7Gsdj4nX6
3Kk+7FQNktlrhxCZIFN/+CdusOUuDd8r/75d7DnsRK5YvSb0sZzJkfD3Nba68Ms=
=7J2+
-----END PGP SIGNATURE-----
Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux
Merge 4.14-rc3 in order to pick up the new timer_setup function.
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: Matt Mackall <mpm@selenic.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Several function prototypes for the set/get functions defined by
module_param_call() have a slightly wrong argument types. This fixes
those in an effort to clean up the calls when running under type-enforced
compiler instrumentation for CFI. This is the result of running the
following semantic patch:
@match_module_param_call_function@
declarer name module_param_call;
identifier _name, _set_func, _get_func;
expression _arg, _mode;
@@
module_param_call(_name, _set_func, _get_func, _arg, _mode);
@fix_set_prototype
depends on match_module_param_call_function@
identifier match_module_param_call_function._set_func;
identifier _val, _param;
type _val_type, _param_type;
@@
int _set_func(
-_val_type _val
+const char * _val
,
-_param_type _param
+const struct kernel_param * _param
) { ... }
@fix_get_prototype
depends on match_module_param_call_function@
identifier match_module_param_call_function._get_func;
identifier _val, _param;
type _val_type, _param_type;
@@
int _get_func(
-_val_type _val
+char * _val
,
-_param_type _param
+const struct kernel_param * _param
) { ... }
Two additional by-hand changes are included for places where the above
Coccinelle script didn't notice them:
drivers/platform/x86/thinkpad_acpi.c
fs/lockd/svc.c
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Please do not apply this to mainline directly, instead please re-run the
coccinelle script shown below and apply its output.
For several reasons, it is desirable to use {READ,WRITE}_ONCE() in
preference to ACCESS_ONCE(), and new code is expected to use one of the
former. So far, there's been no reason to change most existing uses of
ACCESS_ONCE(), as these aren't harmful, and changing them results in
churn.
However, for some features, the read/write distinction is critical to
correct operation. To distinguish these cases, separate read/write
accessors must be used. This patch migrates (most) remaining
ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following
coccinelle script:
----
// Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and
// WRITE_ONCE()
// $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch
virtual patch
@ depends on patch @
expression E1, E2;
@@
- ACCESS_ONCE(E1) = E2
+ WRITE_ONCE(E1, E2)
@ depends on patch @
expression E;
@@
- ACCESS_ONCE(E)
+ READ_ONCE(E)
----
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: davem@davemloft.net
Cc: linux-arch@vger.kernel.org
Cc: mpe@ellerman.id.au
Cc: shuah@kernel.org
Cc: snitzer@redhat.com
Cc: thor.thayer@linux.intel.com
Cc: tj@kernel.org
Cc: viro@zeniv.linux.org.uk
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: Harald Welte <laforge@gnumonks.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit fixes the duplicate inline declaration specifier in
tpm2_rc_value which caused a warning
Signed-off-by: Ruben Roy <rubenroy2005@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Use __le32 type for data in that format.
Fixes: 0edbfea537 ("tpm/tpm_tis_spi: Add support for spi phy")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
The local variable 'handle' should have the type __be32 instead of u32.
Fixes: 745b361e98 ("tpm: infrastructure for TPM spaces")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
The local variable 'attrs' should have the type __be32 instead of u32.
Fixes: 58472f5cd4 ("tpm: validate TPM 2.0 commands")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
tpm_transmit() does not offer an explicit interface to indicate the number
of valid bytes in the communication buffer. Instead, it relies on the
commandSize field in the TPM header that is encoded within the buffer.
Therefore, ensure that a) enough data has been written to the buffer, so
that the commandSize field is present and b) the commandSize field does not
announce more data than has been written to the buffer.
This should have been fixed with CVE-2011-1161 long ago, but apparently
a correct version of that patch never made it into the kernel.
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The TPM can choose one of two ways to react to the TPM2_SelfTest command.
It can either run all self tests synchronously and then return RC_SUCCESS
once all tests were successful. Or it can choose to run the tests
asynchronously and return RC_TESTING immediately while the self tests still
execute in the background.
The previous implementation apparently was not aware of those possibilities
and attributed RC_TESTING to some prototype chips instead. With this change
the return code of TPM2_SelfTest is interpreted correctly, i.e. the self
test result is polled if and only if RC_TESTING is received.
Unfortunately, the polling cannot be done in the most straightforward way.
If RC_TESTING is received, ideally the code should now poll the
selfTestDone bit in the STS register, as this avoids sending more commands,
that might interrupt self tests executing in the background and thus
prevent them from ever completing. But it cannot be guaranteed that this
bit is correctly implemented for all devices, so the next best thing would
be to use TPM2_GetTestResult to query the test result. But the response to
that command can be very long, and the code currently lacks the
capabilities for efficient unmarshalling, so it is difficult to execute
this command.
Therefore, we simply run the TPM2_SelfTest command in a loop, which should
complete eventually, since we only request the execution of self tests that
have not yet been done.
Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
In order to avoid delaying the code longer than necessary while still
giving the TPM enough time to execute the self tests asynchronously, start
with a small delay between two polls and increase it each round.
Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
tpm2_do_selftest is only used during initialization of the TPM to ensure
that the device functions correctly. Therefore, it is sufficient to request
only missing self tests (parameter full_test=0), not a reexecution of all
self tests, as was done before. This allows for a faster execution of this
command.
Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The buffers used as tx_buf/rx_buf in a SPI transfer need to be DMA-safe.
This cannot be guaranteed for the buffers passed to tpm_tis_spi_read_bytes
and tpm_tis_spi_write_bytes. Therefore, we need to use our own DMA-safe
buffer and copy the data to/from it.
The buffer needs to be allocated separately, to ensure that it is
cacheline-aligned and not shared with other data, so that DMA can work
correctly.
Fixes: 0edbfea537 ("tpm/tpm_tis_spi: Add support for spi phy")
Cc: stable@vger.kernel.org
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
This patch gets rid of dealing with intermediate flag for start method
and use start method value from ACPI table directly.
For ARM64, the locality is handled by Trust Zone in FW. The layout
does not have crb_regs_head. It is hitting the following line.
dev_warn(dev, FW_BUG "Bad ACPI memory layout");
Current code excludes CRB_FL_ACPI_START for this check. Now since
ARM64 support for TPM CRB is added, CRB_FL_CRB_SMC_START should also be
excluded from this check.
For goIdle and cmdReady where code was excluding CRB_FL_ACPI_START only
(do nothing for ACPI start method), CRB_FL_CRB_SMC_START was also
excluded as ARM64 SMC start method does not have TPM_CRB_CTRL_REQ.
However with special PPT workaround requiring CRB_FL_CRB_START to be
set in addition to CRB_FL_ACPI_START and the addition flag of SMC
start method CRB_FL_CRB_SMC_START, the code has become difficult to
maintain and undrestand. It is better to make code deal with start
method value from ACPI table directly.
Signed-off-by: Jiandi An <anjiandi@codeaurora.org>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Making cmd_getticks 'const' introduced a couple of harmless warnings:
drivers/char/tpm/tpm_tis_core.c: In function 'probe_itpm':
drivers/char/tpm/tpm_tis_core.c:469:31: error: passing argument 2 of 'tpm_tis_send_data' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers]
rc = tpm_tis_send_data(chip, cmd_getticks, len);
drivers/char/tpm/tpm_tis_core.c:477:31: error: passing argument 2 of 'tpm_tis_send_data' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers]
rc = tpm_tis_send_data(chip, cmd_getticks, len);
drivers/char/tpm/tpm_tis_core.c:255:12: note: expected 'u8 * {aka unsigned char *}' but argument is of type 'const u8 * {aka const unsigned char *}'
static int tpm_tis_send_data(struct tpm_chip *chip, u8 *buf, size_t len)
This changes the related functions to all take 'const' pointers
so that gcc can see this as being correct. I had to slightly
modify the logic around tpm_tis_spi_transfer() for this to work
without introducing ugly casts.
Cc: stable@vger.kernel.org
Fixes: 5e35bd8e06b9 ("tpm_tis: make array cmd_getticks static const to shink object code size")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Don't populate array cmd_getticks on the stack, instead make it static
const. Makes the object code smaller by over 160 bytes:
Before:
text data bss dec hex filename
18813 3152 128 22093 564d drivers/char/tpm/tpm_tis_core.o
After:
text data bss dec hex filename
18554 3248 128 21930 55aa drivers/char/tpm/tpm_tis_core.o
Cc: stable@vger.kernel.org
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Omit an extra message for a memory allocation failure in this function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The error exit path omits kfree'ing the allocated new_smi, causing a memory
leak. Fix this by kfree'ing new_smi.
Detected by CoverityScan, CID#14582571 ("Resource Leak")
Fixes: 7e030d6dff ("ipmi: Prefer ACPI system interfaces over SMBIOS ones")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
pr_err() messages should terminated with a new-line to avoid
other messages being concatenated onto the end.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Migrated pubek_show to struct tpm_buf and cleaned up its implementation.
Previously the output parameter structure was declared but left
completely unused. Now it is used to refer different fields of the
output. We can move it to tpm-sysfs.c as it does not have any use
outside of that file.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The pointer bmc is being initialized and this initialized value is
never being read, so this is assignment redundant and can be removed.
Cleans up clang warning:
warning: Value stored to 'bmc' during its initialization is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
pr_err() messages should terminated with a new-line to avoid
other messages being concatenated onto the end.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Get rid of all printfs, using dev_xxx() if a device is available,
pr_xxx() otherwise, and format long strings properly.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Rework the DMI probe function to be a generic platform probe, and
then rework the DMI code (and a few other things) to use the more
generic information. This is so other things can declare platform
IPMI devices.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Create a device attribute for everything we show in proc, getting
ready for removing the proc stuff.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Create a device attribute for everything we show in proc, getting
ready for removing the proc stuff.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Instead of allocating the smi_info structure, filling in the I/O
info, and passing it to ipmi_si_add_smi(), just pass the I/O
info in the io structure and let ipmi_si_add_smi() allocate
the smi_info structure.
This required redoing the way the remove functions for some
device interfaces worked, a new function named
ipmi_si_remove_by_dev() allows the device to be passed in and
detected instead of using driver data, which couldn't be
filled out easily othersize.
After this the platform handling should be decoupled from the
smi_info structure and that handling can be pulled out to its
own files.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
So the platform code can do it without having to access the
smi info, getting ready for pulling the platform handling
section to their own files.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
That's where it belongs, and we are getting ready for moving the
platform handling out of the main ipmi_si_intf.c file.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
A BMC's guid or device id info may change dynamically, this could
result in a different configuration that needs to be done. Adjust
the BMCs dynamically.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
This is getting ready for the ability to redo the BMC if it's
information changes, we need a fallback mechanism.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Currently, it's up to the IPMI SMIs to provide the product & version
details of BMCs behind registered IPMI SMI interfaces. This device ID is
provided on SMI regsitration, and kept around for all future queries.
However, this version information isn't always static. For example, a
BMC may be upgraded at runtime, making the old version information
stale.
This change allows querying the BMC device ID & version information
dynamically. If no static device_id argument is provided to
ipmi_register_smi, then the IPMI core code will perform a Get Device ID
IPMI command to query the version information when needed. We keep a
short-term cache of this information so we don't need to re-query
for every attribute access.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
I basically rewrote this, I fixed some locking issues and simplified
things. Same functional change, though.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
There are a lot of bad things that a set of BMCs could do that
would really confuse the IPMI driver; it's possible for BMCs with
different GUIDs to have the same product/devid (though that's
not technically legal), which would result in platform device
namespace collisions. Fixing it would involve either using
the GUID in the BMC name, which resulted in huge names, or
just using an ida for numbering the BMCs. The latter approach
was chosen to avoid the huge names.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Currently, ipmi_demagle_device_id requires a full response buffer in its
data argument. This means we can't use it to parse a response in a
struct ipmi_recv_msg, which has the netfn and cmd as separate bytes.
This change alters the definition and users of ipmi_demangle_device_id
to use a split netfn, cmd and data buffer, so it can be used with
non-sequential responses.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Fixed the ipmi_ssif.c and ipmi_si_intf.c changes to use data from the
response, not the data from the message, when passing info to the
ipmi_demangle_device_id() function.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
In an upcoming change, we'll want to grab a reference to the ipmi_smi_t
from a struct bmc_device. This change adds a pointer to allow this.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Reworked to support multiple interfaces on a BMC.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
This makes getting the device id consistent, and make it possible
to add a function to fetch it dynamically later.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
There was a certain error case where the BMC wouldn't be deregistered
like it should be. Rework the BMC registration to make calling
ipmi_bmc_unregister() ok even if it's not registered and to clean up
the error handling for ipmi_bmc_register().
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The recent changes to add SMBIOS (DMI) IPMI interfaces as platform
devices caused DMI to be selected before ACPI, causing ACPI type
of operations to not work.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
BMC device refcounts were not being decremented after fetching from
driver_find_device(). Also, document the use of ipmidriver_mutex
and tighten it's span some by incrementing the BMC's usecount in
the BMC find routines and not later. This will be important for
future changes where a long mutex hold area will complicate things.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
James Bottomley