Commit Graph

52728 Commits

Author SHA1 Message Date
Yuchung Cheng 15bdd5686c tcp: always ACK immediately on hole repairs
RFC 5681 sec 4.2:
  To provide feedback to senders recovering from losses, the receiver
  SHOULD send an immediate ACK when it receives a data segment that
  fills in all or part of a gap in the sequence space.

When a gap is partially filled, __tcp_ack_snd_check already checks
the out-of-order queue and correctly send an immediate ACK. However
when a gap is fully filled, the previous implementation only resets
pingpong mode which does not guarantee an immediate ACK because the
quick ACK counter may be zero. This patch addresses this issue by
marking the one-time immediate ACK flag instead.

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11 11:31:35 -07:00
Yuchung Cheng d2ccd7bc8a tcp: avoid resetting ACK timer in DCTCP
The recent fix of acking immediately in DCTCP on CE status change
has an undesirable side-effect: it also resets TCP ack timer and
disables pingpong mode (interactive session). But the CE status
change has nothing to do with them. This patch addresses that by
using the new one-time immediate ACK flag instead of calling
tcp_enter_quickack_mode().

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11 11:31:35 -07:00
Yuchung Cheng 466466dc6c tcp: mandate a one-time immediate ACK
Add a new flag to indicate a one-time immediate ACK. This flag is
occasionaly set under specific TCP protocol states in addition to
the more common quickack mechanism for interactive application.

In several cases in the TCP code we want to force an immediate ACK
but do not want to call tcp_enter_quickack_mode() because we do
not want to forget the icsk_ack.pingpong or icsk_ack.ato state.

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11 11:31:35 -07:00
Colin Ian King 98ed1e642c rxrpc: remove redundant static int 'zero'
The static int 'zero' is defined but is never used hence it is
redundant and can be removed. The use of this variable was removed
with commit a158bdd324 ("rxrpc: Fix call timeouts").

Cleans up clang warning:
warning: 'zero' defined but not used [-Wunused-const-variable=]

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11 11:25:18 -07:00
Martin KaFai Lau 8217ca653e bpf: Enable BPF_PROG_TYPE_SK_REUSEPORT bpf prog in reuseport selection
This patch allows a BPF_PROG_TYPE_SK_REUSEPORT bpf prog to select a
SO_REUSEPORT sk from a BPF_MAP_TYPE_REUSEPORT_ARRAY introduced in
the earlier patch.  "bpf_run_sk_reuseport()" will return -ECONNREFUSED
when the BPF_PROG_TYPE_SK_REUSEPORT prog returns SK_DROP.
The callers, in inet[6]_hashtable.c and ipv[46]/udp.c, are modified to
handle this case and return NULL immediately instead of continuing the
sk search from its hashtable.

It re-uses the existing SO_ATTACH_REUSEPORT_EBPF setsockopt to attach
BPF_PROG_TYPE_SK_REUSEPORT.  The "sk_reuseport_attach_bpf()" will check
if the attaching bpf prog is in the new SK_REUSEPORT or the existing
SOCKET_FILTER type and then check different things accordingly.

One level of "__reuseport_attach_prog()" call is removed.  The
"sk_unhashed() && ..." and "sk->sk_reuseport_cb" tests are pushed
back to "reuseport_attach_prog()" in sock_reuseport.c.  sock_reuseport.c
seems to have more knowledge on those test requirements than filter.c.
In "reuseport_attach_prog()", after new_prog is attached to reuse->prog,
the old_prog (if any) is also directly freed instead of returning the
old_prog to the caller and asking the caller to free.

The sysctl_optmem_max check is moved back to the
"sk_reuseport_attach_filter()" and "sk_reuseport_attach_bpf()".
As of other bpf prog types, the new BPF_PROG_TYPE_SK_REUSEPORT is only
bounded by the usual "bpf_prog_charge_memlock()" during load time
instead of bounded by both bpf_prog_charge_memlock and sysctl_optmem_max.

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-11 01:58:46 +02:00
Martin KaFai Lau 2dbb9b9e6d bpf: Introduce BPF_PROG_TYPE_SK_REUSEPORT
This patch adds a BPF_PROG_TYPE_SK_REUSEPORT which can select
a SO_REUSEPORT sk from a BPF_MAP_TYPE_REUSEPORT_ARRAY.  Like other
non SK_FILTER/CGROUP_SKB program, it requires CAP_SYS_ADMIN.

BPF_PROG_TYPE_SK_REUSEPORT introduces "struct sk_reuseport_kern"
to store the bpf context instead of using the skb->cb[48].

At the SO_REUSEPORT sk lookup time, it is in the middle of transiting
from a lower layer (ipv4/ipv6) to a upper layer (udp/tcp).  At this
point,  it is not always clear where the bpf context can be appended
in the skb->cb[48] to avoid saving-and-restoring cb[].  Even putting
aside the difference between ipv4-vs-ipv6 and udp-vs-tcp.  It is not
clear if the lower layer is only ipv4 and ipv6 in the future and
will it not touch the cb[] again before transiting to the upper
layer.

For example, in udp_gro_receive(), it uses the 48 byte NAPI_GRO_CB
instead of IP[6]CB and it may still modify the cb[] after calling
the udp[46]_lib_lookup_skb().  Because of the above reason, if
sk->cb is used for the bpf ctx, saving-and-restoring is needed
and likely the whole 48 bytes cb[] has to be saved and restored.

Instead of saving, setting and restoring the cb[], this patch opts
to create a new "struct sk_reuseport_kern" and setting the needed
values in there.

The new BPF_PROG_TYPE_SK_REUSEPORT and "struct sk_reuseport_(kern|md)"
will serve all ipv4/ipv6 + udp/tcp combinations.  There is no protocol
specific usage at this point and it is also inline with the current
sock_reuseport.c implementation (i.e. no protocol specific requirement).

In "struct sk_reuseport_md", this patch exposes data/data_end/len
with semantic similar to other existing usages.  Together
with "bpf_skb_load_bytes()" and "bpf_skb_load_bytes_relative()",
the bpf prog can peek anywhere in the skb.  The "bind_inany" tells
the bpf prog that the reuseport group is bind-ed to a local
INANY address which cannot be learned from skb.

The new "bind_inany" is added to "struct sock_reuseport" which will be
used when running the new "BPF_PROG_TYPE_SK_REUSEPORT" bpf prog in order
to avoid repeating the "bind INANY" test on
"sk_v6_rcv_saddr/sk->sk_rcv_saddr" every time a bpf prog is run.  It can
only be properly initialized when a "sk->sk_reuseport" enabled sk is
adding to a hashtable (i.e. during "reuseport_alloc()" and
"reuseport_add_sock()").

The new "sk_select_reuseport()" is the main helper that the
bpf prog will use to select a SO_REUSEPORT sk.  It is the only function
that can use the new BPF_MAP_TYPE_REUSEPORT_ARRAY.  As mentioned in
the earlier patch, the validity of a selected sk is checked in
run time in "sk_select_reuseport()".  Doing the check in
verification time is difficult and inflexible (consider the map-in-map
use case).  The runtime check is to compare the selected sk's reuseport_id
with the reuseport_id that we want.  This helper will return -EXXX if the
selected sk cannot serve the incoming request (e.g. reuseport_id
not match).  The bpf prog can decide if it wants to do SK_DROP as its
discretion.

When the bpf prog returns SK_PASS, the kernel will check if a
valid sk has been selected (i.e. "reuse_kern->selected_sk != NULL").
If it does , it will use the selected sk.  If not, the kernel
will select one from "reuse->socks[]" (as before this patch).

The SK_DROP and SK_PASS handling logic will be in the next patch.

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-11 01:58:46 +02:00
Martin KaFai Lau 5dc4c4b7d4 bpf: Introduce BPF_MAP_TYPE_REUSEPORT_SOCKARRAY
This patch introduces a new map type BPF_MAP_TYPE_REUSEPORT_SOCKARRAY.

To unleash the full potential of a bpf prog, it is essential for the
userspace to be capable of directly setting up a bpf map which can then
be consumed by the bpf prog to make decision.  In this case, decide which
SO_REUSEPORT sk to serve the incoming request.

By adding BPF_MAP_TYPE_REUSEPORT_SOCKARRAY, the userspace has total control
and visibility on where a SO_REUSEPORT sk should be located in a bpf map.
The later patch will introduce BPF_PROG_TYPE_SK_REUSEPORT such that
the bpf prog can directly select a sk from the bpf map.  That will
raise the programmability of the bpf prog attached to a reuseport
group (a group of sk serving the same IP:PORT).

For example, in UDP, the bpf prog can peek into the payload (e.g.
through the "data" pointer introduced in the later patch) to learn
the application level's connection information and then decide which sk
to pick from a bpf map.  The userspace can tightly couple the sk's location
in a bpf map with the application logic in generating the UDP payload's
connection information.  This connection info contact/API stays within the
userspace.

Also, when used with map-in-map, the userspace can switch the
old-server-process's inner map to a new-server-process's inner map
in one call "bpf_map_update_elem(outer_map, &index, &new_reuseport_array)".
The bpf prog will then direct incoming requests to the new process instead
of the old process.  The old process can finish draining the pending
requests (e.g. by "accept()") before closing the old-fds.  [Note that
deleting a fd from a bpf map does not necessary mean the fd is closed]

During map_update_elem(),
Only SO_REUSEPORT sk (i.e. which has already been added
to a reuse->socks[]) can be used.  That means a SO_REUSEPORT sk that is
"bind()" for UDP or "bind()+listen()" for TCP.  These conditions are
ensured in "reuseport_array_update_check()".

A SO_REUSEPORT sk can only be added once to a map (i.e. the
same sk cannot be added twice even to the same map).  SO_REUSEPORT
already allows another sk to be created for the same IP:PORT.
There is no need to re-create a similar usage in the BPF side.

When a SO_REUSEPORT is deleted from the "reuse->socks[]" (e.g. "close()"),
it will notify the bpf map to remove it from the map also.  It is
done through "bpf_sk_reuseport_detach()" and it will only be called
if >=1 of the "reuse->sock[]" has ever been added to a bpf map.

The map_update()/map_delete() has to be in-sync with the
"reuse->socks[]".  Hence, the same "reuseport_lock" used
by "reuse->socks[]" has to be used here also. Care has
been taken to ensure the lock is only acquired when the
adding sk passes some strict tests. and
freeing the map does not require the reuseport_lock.

The reuseport_array will also support lookup from the syscall
side.  It will return a sock_gen_cookie().  The sock_gen_cookie()
is on-demand (i.e. a sk's cookie is not generated until the very
first map_lookup_elem()).

The lookup cookie is 64bits but it goes against the logical userspace
expectation on 32bits sizeof(fd) (and as other fd based bpf maps do also).
It may catch user in surprise if we enforce value_size=8 while
userspace still pass a 32bits fd during update.  Supporting different
value_size between lookup and update seems unintuitive also.

We also need to consider what if other existing fd based maps want
to return 64bits value from syscall's lookup in the future.
Hence, reuseport_array supports both value_size 4 and 8, and
assuming user will usually use value_size=4.  The syscall's lookup
will return ENOSPC on value_size=4.  It will will only
return 64bits value from sock_gen_cookie() when user consciously
choose value_size=8 (as a signal that lookup is desired) which then
requires a 64bits value in both lookup and update.

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-11 01:58:46 +02:00
Martin KaFai Lau 736b46027e net: Add ID (if needed) to sock_reuseport and expose reuseport_lock
A later patch will introduce a BPF_MAP_TYPE_REUSEPORT_ARRAY which
allows a SO_REUSEPORT sk to be added to a bpf map.  When a sk
is removed from reuse->socks[], it also needs to be removed from
the bpf map.  Also, when adding a sk to a bpf map, the bpf
map needs to ensure it is indeed in a reuse->socks[].
Hence, reuseport_lock is needed by the bpf map to ensure its
map_update_elem() and map_delete_elem() operations are in-sync with
the reuse->socks[].  The BPF_MAP_TYPE_REUSEPORT_ARRAY map will only
acquire the reuseport_lock after ensuring the adding sk is already
in a reuseport group (i.e. reuse->socks[]).  The map_lookup_elem()
will be lockless.

This patch also adds an ID to sock_reuseport.  A later patch
will introduce BPF_PROG_TYPE_SK_REUSEPORT which allows
a bpf prog to select a sk from a bpf map.  It is inflexible to
statically enforce a bpf map can only contain the sk belonging to
a particular reuse->socks[] (i.e. same IP:PORT) during the bpf
verification time. For example, think about the the map-in-map situation
where the inner map can be dynamically changed in runtime and the outer
map may have inner maps belonging to different reuseport groups.
Hence, when the bpf prog (in the new BPF_PROG_TYPE_SK_REUSEPORT
type) selects a sk,  this selected sk has to be checked to ensure it
belongs to the requesting reuseport group (i.e. the group serving
that IP:PORT).

The "sk->sk_reuseport_cb" pointer cannot be used for this checking
purpose because the pointer value will change after reuseport_grow().
Instead of saving all checking conditions like the ones
preced calling "reuseport_add_sock()" and compare them everytime a
bpf_prog is run, a 32bits ID is introduced to survive the
reuseport_grow().  The ID is only acquired if any of the
reuse->socks[] is added to the newly introduced
"BPF_MAP_TYPE_REUSEPORT_ARRAY" map.

If "BPF_MAP_TYPE_REUSEPORT_ARRAY" is not used,  the changes in this
patch is a no-op.

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-11 01:58:45 +02:00
Martin KaFai Lau 40a1227ea8 tcp: Avoid TCP syncookie rejected by SO_REUSEPORT socket
Although the actual cookie check "__cookie_v[46]_check()" does
not involve sk specific info, it checks whether the sk has recent
synq overflow event in "tcp_synq_no_recent_overflow()".  The
tcp_sk(sk)->rx_opt.ts_recent_stamp is updated every second
when it has sent out a syncookie (through "tcp_synq_overflow()").

The above per sk "recent synq overflow event timestamp" works well
for non SO_REUSEPORT use case.  However, it may cause random
connection request reject/discard when SO_REUSEPORT is used with
syncookie because it fails the "tcp_synq_no_recent_overflow()"
test.

When SO_REUSEPORT is used, it usually has multiple listening
socks serving TCP connection requests destinated to the same local IP:PORT.
There are cases that the TCP-ACK-COOKIE may not be received
by the same sk that sent out the syncookie.  For example,
if reuse->socks[] began with {sk0, sk1},
1) sk1 sent out syncookies and tcp_sk(sk1)->rx_opt.ts_recent_stamp
   was updated.
2) the reuse->socks[] became {sk1, sk2} later.  e.g. sk0 was first closed
   and then sk2 was added.  Here, sk2 does not have ts_recent_stamp set.
   There are other ordering that will trigger the similar situation
   below but the idea is the same.
3) When the TCP-ACK-COOKIE comes back, sk2 was selected.
   "tcp_synq_no_recent_overflow(sk2)" returns true. In this case,
   all syncookies sent by sk1 will be handled (and rejected)
   by sk2 while sk1 is still alive.

The userspace may create and remove listening SO_REUSEPORT sockets
as it sees fit.  E.g. Adding new thread (and SO_REUSEPORT sock) to handle
incoming requests, old process stopping and new process starting...etc.
With or without SO_ATTACH_REUSEPORT_[CB]BPF,
the sockets leaving and joining a reuseport group makes picking
the same sk to check the syncookie very difficult (if not impossible).

The later patches will allow bpf prog more flexibility in deciding
where a sk should be located in a bpf map and selecting a particular
SO_REUSEPORT sock as it sees fit.  e.g. Without closing any sock,
replace the whole bpf reuseport_array in one map_update() by using
map-in-map.  Getting the syncookie check working smoothly across
socks in the same "reuse->socks[]" is important.

A partial solution is to set the newly added sk's ts_recent_stamp
to the max ts_recent_stamp of a reuseport group but that will require
to iterate through reuse->socks[]  OR
pessimistically set it to "now - TCP_SYNCOOKIE_VALID" when a sk is
joining a reuseport group.  However, neither of them will solve the
existing sk getting moved around the reuse->socks[] and that
sk may not have ts_recent_stamp updated, unlikely under continuous
synflood but not impossible.

This patch opts to treat the reuseport group as a whole when
considering the last synq overflow timestamp since
they are serving the same IP:PORT from the userspace
(and BPF program) perspective.

"synq_overflow_ts" is added to "struct sock_reuseport".
The tcp_synq_overflow() and tcp_synq_no_recent_overflow()
will update/check reuse->synq_overflow_ts if the sk is
in a reuseport group.  Similar to the reuseport decision in
__inet_lookup_listener(), both sk->sk_reuseport and
sk->sk_reuseport_cb are tested for SO_REUSEPORT usage.
Update on "synq_overflow_ts" happens at roughly once
every second.

A synflood test was done with a 16 rx-queues and 16 reuseport sockets.
No meaningful performance change is observed.  Before and
after the change is ~9Mpps in IPv4.

Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-11 01:58:45 +02:00
Ursula Braun 0d86caff06 net/smc: send response to test link signal
With SMC-D z/OS sends a test link signal every 10 seconds. Linux is
supposed to answer, otherwise the SMC-D connection breaks.

Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10 14:38:43 -07:00
David S. Miller 0780b86666 Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Johan Hedberg says:

====================
pull request: bluetooth-next 2018-08-10

Here's one more (most likely last) bluetooth-next pull request for the
4.19 kernel.

 - Added support for MediaTek serial Bluetooth devices
 - Initial skeleton for controller-side address resolution support
 - Fix BT_HCIUART_RTL related Kconfig dependencies
 - A few other minor fixes/cleanups

Please let me know if there are any issues pulling. Thanks.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10 14:24:57 -07:00
David S. Miller fd685657cd Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next
Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

The following batch contains netfilter updates for your net-next tree:

1) Expose NFT_OSF_MAXGENRELEN maximum OS name length from the new OS
   passive fingerprint matching extension, from Fernando Fernandez.

2) Add extension to support for fine grain conntrack timeout policies
   from nf_tables. As preparation works, this patchset moves
   nf_ct_untimeout() to nf_conntrack_timeout and it also decouples the
   timeout policy from the ctnl_timeout object, most work done by
   Harsha Sharma.

3) Enable connection tracking when conntrack helper is in place.

4) Missing enumeration in uapi header when splitting original xt_osf
   to nfnetlink_osf, also from Fernando.

5) Fix a sparse warning due to incorrect typing in the nf_osf_find(),
   from Wei Yongjun.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10 10:33:08 -07:00
Ankit Navik aa12af77aa Bluetooth: Add definitions for LE set address resolution
Add the definitions for LE address resolution enable HCI commands.
When the LE address resolution enable gets changed via HCI commands
make sure that flag gets updated.

Signed-off-by: Ankit Navik <ankit.p.navik@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-08-10 16:57:57 +02:00
Toshiaki Makita 2539650fad xdp: Helpers for disabling napi_direct of xdp_return_frame
We need some mechanism to disable napi_direct on calling
xdp_return_frame_rx_napi() from some context.
When veth gets support of XDP_REDIRECT, it will redirects packets which
are redirected from other devices. On redirection veth will reuse
xdp_mem_info of the redirection source device to make return_frame work.
But in this case .ndo_xdp_xmit() called from veth redirection uses
xdp_mem_info which is not guarded by NAPI, because the .ndo_xdp_xmit()
is not called directly from the rxq which owns the xdp_mem_info.

This approach introduces a flag in bpf_redirect_info to indicate that
napi_direct should be disabled even when _rx_napi variant is used as
well as helper functions to use it.

A NAPI handler who wants to use this flag needs to call
xdp_set_return_frame_no_direct() before processing packets, and call
xdp_clear_return_frame_no_direct() after xdp_do_flush_map() before
exiting NAPI.

v4:
- Use bpf_redirect_info for storing the flag instead of xdp_mem_info to
  avoid per-frame copy cost.

Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-10 16:12:21 +02:00
Toshiaki Makita 0b19cc0a86 bpf: Make redirect_info accessible from modules
We are going to add kern_flags field in redirect_info for kernel
internal use.
In order to avoid function call to access the flags, make redirect_info
accessible from modules. Also as it is now non-static, add prefix bpf_
to redirect_info.

v6:
- Fix sparse warning around EXPORT_SYMBOL.

Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-10 16:12:21 +02:00
Toshiaki Makita b0768a8658 net: Export skb_headers_offset_update
This is needed for veth XDP which does skb_copy_expand()-like operation.

v2:
- Drop skb_copy_header part because it has already been exported now.

Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-10 16:12:20 +02:00
Björn Töpel eb91e4d4db Revert "xdp: add NULL pointer check in __xdp_return()"
This reverts commit 36e0f12bbf.

The reverted commit adds a WARN to check against NULL entries in the
mem_id_ht rhashtable. Any kernel path implementing the XDP (generic or
driver) fast path is required to make a paired
xdp_rxq_info_reg/xdp_rxq_info_unreg call for proper function. In
addition, a driver using a different allocation scheme than the
default MEM_TYPE_PAGE_SHARED is required to additionally call
xdp_rxq_info_reg_mem_model.

For MEM_TYPE_ZERO_COPY, an xdp_rxq_info_reg_mem_model call ensures
that the mem_id_ht rhashtable has a properly inserted allocator id. If
not, this would be a driver bug. A NULL pointer kernel OOPS is
preferred to the WARN.

Suggested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-10 16:06:48 +02:00
Andrei Vagin 4d99f6602c net: allow to call netif_reset_xps_queues() under cpus_read_lock
The definition of static_key_slow_inc() has cpus_read_lock in place. In the
virtio_net driver, XPS queues are initialized after setting the queue:cpu
affinity in virtnet_set_affinity() which is already protected within
cpus_read_lock. Lockdep prints a warning when we are trying to acquire
cpus_read_lock when it is already held.

This patch adds an ability to call __netif_set_xps_queue under
cpus_read_lock().
Acked-by: Jason Wang <jasowang@redhat.com>

============================================
WARNING: possible recursive locking detected
4.18.0-rc3-next-20180703+ #1 Not tainted
--------------------------------------------
swapper/0/1 is trying to acquire lock:
00000000cf973d46 (cpu_hotplug_lock.rw_sem){++++}, at: static_key_slow_inc+0xe/0x20

but task is already holding lock:
00000000cf973d46 (cpu_hotplug_lock.rw_sem){++++}, at: init_vqs+0x513/0x5a0

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(cpu_hotplug_lock.rw_sem);
  lock(cpu_hotplug_lock.rw_sem);

 *** DEADLOCK ***

 May be due to missing lock nesting notation

3 locks held by swapper/0/1:
 #0: 00000000244bc7da (&dev->mutex){....}, at: __driver_attach+0x5a/0x110
 #1: 00000000cf973d46 (cpu_hotplug_lock.rw_sem){++++}, at: init_vqs+0x513/0x5a0
 #2: 000000005cd8463f (xps_map_mutex){+.+.}, at: __netif_set_xps_queue+0x8d/0xc60

v2: move cpus_read_lock() out of __netif_set_xps_queue()

Cc: "Nambiar, Amritha" <amritha.nambiar@intel.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Fixes: 8af2c06ff4 ("net-sysfs: Add interface for Rx queue(s) map per Tx queue")

Signed-off-by: Andrei Vagin <avagin@gmail.com>

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09 14:25:06 -07:00
Jiri Pirko 63cc5bcc9f net: sched: fix block->refcnt decrement
Currently the refcnt is never decremented in case the value is not 1.
Fix it by adding decrement in case the refcnt is not 1.

Reported-by: Vlad Buslov <vladbu@mellanox.com>
Fixes: f71e0ca4db ("net: sched: Avoid implicit chain 0 creation")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09 14:12:04 -07:00
YueHaibing 0bab1cdc8c decnet: fix using plain integer as NULL warning
Fixes the following sparse warning:
net/decnet/dn_route.c:407:30: warning: Using plain integer as NULL pointer
net/decnet/dn_route.c:1923:22: warning: Using plain integer as NULL pointer

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09 14:11:24 -07:00
Maria Pasechnik eb95f52fc7 net: ipv6_gre: Fix GRO to work on IPv6 over GRE tap
IPv6 GRO over GRE tap is not working while GRO is not set
over the native interface.

gro_list_prepare function updates the same_flow variable
of existing sessions to 1 if their mac headers match the one
of the incoming packet.
same_flow is used to filter out non-matching sessions and keep
potential ones for aggregation.

The number of bytes to compare should be the number of bytes
in the mac headers. In gro_list_prepare this number is set to
be skb->dev->hard_header_len. For GRE interfaces this hard_header_len
should be as it is set in the initialization process (when GRE is
created), it should not be overridden. But currently it is being overridden
by the value that is actually supposed to represent the needed_headroom.
Therefore, the number of bytes compared in order to decide whether the
the mac headers are the same is greater than the length of the headers.

As it's documented in netdevice.h, hard_header_len is the maximum
hardware header length, and needed_headroom is the extra headroom
the hardware may need.
hard_header_len is basically all the bytes received by the physical
till layer 3 header of the packet received by the interface.
For example, if the interface is a GRE tap then the needed_headroom
should be the total length of the following headers:
IP header of the physical, GRE header, mac header of GRE.
It is often used to calculate the MTU of the created interface.

This patch removes the override of the hard_header_len, and
assigns the calculated value to needed_headroom.
This way, the comparison in gro_list_prepare is really of
the mac headers, and if the packets have the same mac headers
the same_flow will be set to 1.

Performance testing: 45% higher bandwidth.
Measuring bandwidth of single-stream IPv4 TCP traffic over IPv6
GRE tap while GRO is not set on the native.
NIC: ConnectX-4LX
Before (GRO not working) : 7.2 Gbits/sec
After (GRO working): 10.5 Gbits/sec

Signed-off-by: Maria Pasechnik <mariap@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09 14:07:38 -07:00
zhong jiang ac5bb5b3b0 rpc: remove unneeded variable 'ret' in rdma_listen_handler
The ret is not modified after initalization, So just remove the variable
and return 0.

Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-08-09 16:11:21 -04:00
Chuck Lever 11b4d66ea3 NFSD: Handle full-length symlinks
I've given up on the idea of zero-copy handling of SYMLINK on the
server side. This is because the Linux VFS symlink API requires the
symlink pathname to be in a NUL-terminated kmalloc'd buffer. The
NUL-termination is going to be problematic (watching out for
landing on a page boundary and dealing with a 4096-byte pathname).

I don't believe that SYMLINK creation is on a performance path or is
requested frequently enough that it will cause noticeable CPU cache
pollution due to data copies.

There will be two places where a transport callout will be necessary
to fill in the rqstp: one will be in the svc_fill_symlink_pathname()
helper that is used by NFSv2 and NFSv3, and the other will be in
nfsd4_decode_create().

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-08-09 16:11:21 -04:00
Chuck Lever 3fd9557aec NFSD: Refactor the generic write vector fill helper
fill_in_write_vector() is nearly the same logic as
svc_fill_write_vector(), but there are a few differences so that
the former can handle multiple WRITE payloads in a single COMPOUND.

svc_fill_write_vector() can be adjusted so that it can be used in
the NFSv4 WRITE code path too. Instead of assuming the pages are
coming from rq_args.pages, have the caller pass in the page list.

The immediate benefit is a reduction of code duplication. It also
prevents the NFSv4 WRITE decoder from passing an empty vector
element when the transport has provided the payload in the xdr_buf's
page array.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-08-09 16:11:21 -04:00
Chuck Lever 07d0ff3b0c svcrdma: Clean up Read chunk path
Simplify the error handling at the tail of recv_read_chunk() by
re-arranging rq_pages[] housekeeping and documenting it properly.

NB: In this path, svc_rdma_recvfrom returns zero. Therefore no
subsequent reply processing is done on the svc_rqstp, and thus the
rq_respages field does not need to be updated.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-08-09 16:11:21 -04:00
Chuck Lever a53d5cb064 svcrdma: Avoid releasing a page in svc_xprt_release()
svc_xprt_release() invokes svc_free_res_pages(), which releases
pages between rq_respages and rq_next_page.

Historically, the RPC/RDMA transport has set these two pointers to
be different by one, which means:

- one page gets released when svc_recv returns 0. This normally
happens whenever one or more RDMA Reads need to be dispatched to
complete construction of an RPC Call.

- one page gets released after every call to svc_send.

In both cases, this released page is immediately refilled by
svc_alloc_arg. There does not seem to be a reason for releasing this
page.

To avoid this unnecessary memory allocator traffic, set rq_next_page
more carefully.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-08-09 16:11:21 -04:00
YueHaibing 9cc3b98d1f sunrpc: remove redundant variables 'checksumlen','blocksize' and 'data'
Variables 'checksumlen','blocksize' and 'data' are being assigned,
but are never used, hence they are redundant and can be removed.

Fix the following warning:

  net/sunrpc/auth_gss/gss_krb5_wrap.c:443:7: warning: variable ‘blocksize’ set but not used [-Wunused-but-set-variable]
  net/sunrpc/auth_gss/gss_krb5_crypto.c:376:15: warning: variable ‘checksumlen’ set but not used [-Wunused-but-set-variable]
  net/sunrpc/xprtrdma/svc_rdma.c:97:9: warning: variable ‘data’ set but not used [-Wunused-but-set-variable]

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-08-09 16:11:21 -04:00
David S. Miller a736e07468 Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/net
Overlapping changes in RXRPC, changing to ktime_get_seconds() whilst
adding some tracepoints.

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09 11:52:36 -07:00
Andrew Lunn 1be52e97ed dsa: slave: eee: Allow ports to use phylink
For a port to be able to use EEE, both the MAC and the PHY must
support EEE. A phy can be provided by both a phydev or phylink. Verify
at least one of these exist, not just phydev.

Fixes: aab9c4067d ("net: dsa: Plug in PHYLINK support")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-08 19:19:03 -07:00
Ursula Braun 7311d665ca net/smc: move sock lock in smc_ioctl()
When an SMC socket is connecting it is decided whether fallback to
TCP is needed. To avoid races between connect and ioctl move the
sock lock before the use_fallback check.

Reported-by: syzbot+5b2cece1a8ecb2ca77d8@syzkaller.appspotmail.com
Reported-by: syzbot+19557374321ca3710990@syzkaller.appspotmail.com
Fixes: 1992d99882 ("net/smc: take sock lock in smc_ioctl()")
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-08 19:14:22 -07:00
Ursula Braun bd58c7e086 net/smc: allow sysctl rmem and wmem defaults for servers
Without setsockopt SO_SNDBUF and SO_RCVBUF settings, the sysctl
defaults net.ipv4.tcp_wmem and net.ipv4.tcp_rmem should be the base
for the sizes of the SMC sndbuf and rcvbuf. Any TCP buffer size
optimizations for servers should be ignored.

Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-08 19:14:22 -07:00
Ursula Braun caa21e19e0 net/smc: no shutdown in state SMC_LISTEN
Invoking shutdown for a socket in state SMC_LISTEN does not make
sense. Nevertheless programs like syzbot fuzzing the kernel may
try to do this. For SMC this means a socket refcounting problem.
This patch makes sure a shutdown call for an SMC socket in state
SMC_LISTEN simply returns with -ENOTCONN.

Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-08 19:14:22 -07:00
David Howells 330bdcfadc rxrpc: Fix the keepalive generator [ver #2]
AF_RXRPC has a keepalive message generator that generates a message for a
peer ~20s after the last transmission to that peer to keep firewall ports
open.  The implementation is incorrect in the following ways:

 (1) It mixes up ktime_t and time64_t types.

 (2) It uses ktime_get_real(), the output of which may jump forward or
     backward due to adjustments to the time of day.

 (3) If the current time jumps forward too much or jumps backwards, the
     generator function will crank the base of the time ring round one slot
     at a time (ie. a 1s period) until it catches up, spewing out VERSION
     packets as it goes.

Fix the problem by:

 (1) Only using time64_t.  There's no need for sub-second resolution.

 (2) Use ktime_get_seconds() rather than ktime_get_real() so that time
     isn't perceived to go backwards.

 (3) Simplifying rxrpc_peer_keepalive_worker() by splitting it into two
     parts:

     (a) The "worker" function that manages the buckets and the timer.

     (b) The "dispatch" function that takes the pending peers and
     	 potentially transmits a keepalive packet before putting them back
     	 in the ring into the slot appropriate to the revised last-Tx time.

 (4) Taking everything that's pending out of the ring and splicing it into
     a temporary collector list for processing.

     In the case that there's been a significant jump forward, the ring
     gets entirely emptied and then the time base can be warped forward
     before the peers are processed.

     The warping can't happen if the ring isn't empty because the slot a
     peer is in is keepalive-time dependent, relative to the base time.

 (5) Limit the number of iterations of the bucket array when scanning it.

 (6) Set the timer to skip any empty slots as there's no point waking up if
     there's nothing to do yet.

This can be triggered by an incoming call from a server after a reboot with
AF_RXRPC and AFS built into the kernel causing a peer record to be set up
before userspace is started.  The system clock is then adjusted by
userspace, thereby potentially causing the keepalive generator to have a
meltdown - which leads to a message like:

	watchdog: BUG: soft lockup - CPU#0 stuck for 23s! [kworker/0:1:23]
	...
	Workqueue: krxrpcd rxrpc_peer_keepalive_worker
	EIP: lock_acquire+0x69/0x80
	...
	Call Trace:
	 ? rxrpc_peer_keepalive_worker+0x5e/0x350
	 ? _raw_spin_lock_bh+0x29/0x60
	 ? rxrpc_peer_keepalive_worker+0x5e/0x350
	 ? rxrpc_peer_keepalive_worker+0x5e/0x350
	 ? __lock_acquire+0x3d3/0x870
	 ? process_one_work+0x110/0x340
	 ? process_one_work+0x166/0x340
	 ? process_one_work+0x110/0x340
	 ? worker_thread+0x39/0x3c0
	 ? kthread+0xdb/0x110
	 ? cancel_delayed_work+0x90/0x90
	 ? kthread_stop+0x70/0x70
	 ? ret_from_fork+0x19/0x24

Fixes: ace45bec6d ("rxrpc: Fix firewall route keepalive")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-08 19:10:26 -07:00
Chuck Lever 8d4fb8ff42 xprtrdma: Fix disconnect regression
I found that injecting disconnects with v4.18-rc resulted in
random failures of the multi-threaded git regression test.

The root cause appears to be that, after a reconnect, the
RPC/RDMA transport is waking pending RPCs before the transport has
posted enough Receive buffers to receive the Replies. If a Reply
arrives before enough Receive buffers are posted, the connection
is dropped. A few connection drops happen in quick succession as
the client and server struggle to regain credit synchronization.

This regression was introduced with commit 7c8d9e7c88 ("xprtrdma:
Move Receive posting to Receive handler"). The client is supposed to
post a single Receive when a connection is established because
it's not supposed to send more than one RPC Call before it gets
a fresh credit grant in the first RPC Reply [RFC 8166, Section
3.3.3].

Unfortunately there appears to be a longstanding bug in the Linux
client's credit accounting mechanism. On connect, it simply dumps
all pending RPC Calls onto the new connection. It's possible it has
done this ever since the RPC/RDMA transport was added to the kernel
ten years ago.

Servers have so far been tolerant of this bad behavior. Currently no
server implementation ever changes its credit grant over reconnects,
and servers always repost enough Receives before connections are
fully established.

The Linux client implementation used to post a Receive before each
of these Calls. This has covered up the flooding send behavior.

I could try to correct this old bug so that the client sends exactly
one RPC Call and waits for a Reply. Since we are so close to the
next merge window, I'm going to instead provide a simple patch to
post enough Receives before a reconnect completes (based on the
number of credits granted to the previous connection).

The spurious disconnects will be gone, but the client will still
send multiple RPC Calls immediately after a reconnect.

Addressing the latter problem will wait for a merge window because
a) I expect it to be a large change requiring lots of testing, and
b) obviously the Linux client has interoperated successfully since
day zero while still being broken.

Fixes: 7c8d9e7c88 ("xprtrdma: Move Receive posting to ... ")
Cc: stable@vger.kernel.org # v4.18+
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-08-08 16:49:47 -04:00
Wei Yongjun e7ea2a52ff netfilter: nfnetlink_osf: fix using plain integer as NULL warning
Fixes the following sparse warning:

net/netfilter/nfnetlink_osf.c:274:24: warning:
 Using plain integer as NULL pointer

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-08-08 19:05:39 +02:00
zhong jiang 5a0c6cee17 net:mod: remove unneeded variable 'ret' in init_p9
The ret is modified after initalization, so just remove it and
return 0.

Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-08 09:40:44 -07:00
zhong jiang fb3b467e06 net:af_iucv: get rid of the unneeded variable 'err' in afiucv_pm_freeze
We will not use the variable 'err' after initalization, So remove it and
return 0.

Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-08 09:39:36 -07:00
Cong Wang 0dcb82254d llc: use refcount_inc_not_zero() for llc_sap_find()
llc_sap_put() decreases the refcnt before deleting sap
from the global list. Therefore, there is a chance
llc_sap_find() could find a sap with zero refcnt
in this global list.

Close this race condition by checking if refcnt is zero
or not in llc_sap_find(), if it is zero then it is being
removed so we can just treat it as gone.

Reported-by: <syzbot+278893f3f7803871f7ce@syzkaller.appspotmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-07 15:54:00 -07:00
Alexey Kodanev 61ef4b07fc dccp: fix undefined behavior with 'cwnd' shift in ccid2_cwnd_restart()
The shift of 'cwnd' with '(now - hc->tx_lsndtime) / hc->tx_rto' value
can lead to undefined behavior [1].

In order to fix this use a gradual shift of the window with a 'while'
loop, similar to what tcp_cwnd_restart() is doing.

When comparing delta and RTO there is a minor difference between TCP
and DCCP, the last one also invokes dccp_cwnd_restart() and reduces
'cwnd' if delta equals RTO. That case is preserved in this change.

[1]:
[40850.963623] UBSAN: Undefined behaviour in net/dccp/ccids/ccid2.c:237:7
[40851.043858] shift exponent 67 is too large for 32-bit type 'unsigned int'
[40851.127163] CPU: 3 PID: 15940 Comm: netstress Tainted: G        W   E     4.18.0-rc7.x86_64 #1
...
[40851.377176] Call Trace:
[40851.408503]  dump_stack+0xf1/0x17b
[40851.451331]  ? show_regs_print_info+0x5/0x5
[40851.503555]  ubsan_epilogue+0x9/0x7c
[40851.548363]  __ubsan_handle_shift_out_of_bounds+0x25b/0x2b4
[40851.617109]  ? __ubsan_handle_load_invalid_value+0x18f/0x18f
[40851.686796]  ? xfrm4_output_finish+0x80/0x80
[40851.739827]  ? lock_downgrade+0x6d0/0x6d0
[40851.789744]  ? xfrm4_prepare_output+0x160/0x160
[40851.845912]  ? ip_queue_xmit+0x810/0x1db0
[40851.895845]  ? ccid2_hc_tx_packet_sent+0xd36/0x10a0 [dccp]
[40851.963530]  ccid2_hc_tx_packet_sent+0xd36/0x10a0 [dccp]
[40852.029063]  dccp_xmit_packet+0x1d3/0x720 [dccp]
[40852.086254]  dccp_write_xmit+0x116/0x1d0 [dccp]
[40852.142412]  dccp_sendmsg+0x428/0xb20 [dccp]
[40852.195454]  ? inet_dccp_listen+0x200/0x200 [dccp]
[40852.254833]  ? sched_clock+0x5/0x10
[40852.298508]  ? sched_clock+0x5/0x10
[40852.342194]  ? inet_create+0xdf0/0xdf0
[40852.388988]  sock_sendmsg+0xd9/0x160
...

Fixes: 113ced1f52 ("dccp ccid-2: Perform congestion-window validation")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-07 15:34:44 -07:00
YueHaibing 5941923da2 RDS: IB: fix 'passing zero to ERR_PTR()' warning
Fix a static code checker warning:
 net/rds/ib_frmr.c:82 rds_ib_alloc_frmr() warn: passing zero to 'ERR_PTR'

The error path for ib_alloc_mr failure should set err to PTR_ERR.

Fixes: 1659185fb4 ("RDS: IB: Support Fastreg MR (FRMR) memory registration mode")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-07 13:19:45 -07:00
Ying Xue 37436d9c0e tipc: fix an interrupt unsafe locking scenario
Commit 9faa89d4ed ("tipc: make function tipc_net_finalize() thread
safe") tries to make it thread safe to set node address, so it uses
node_list_lock lock to serialize the whole process of setting node
address in tipc_net_finalize(). But it causes the following interrupt
unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  rht_deferred_worker()
  rhashtable_rehash_table()
  lock(&(&ht->lock)->rlock)
			       tipc_nl_compat_doit()
                               tipc_net_finalize()
                               local_irq_disable();
                               lock(&(&tn->node_list_lock)->rlock);
                               tipc_sk_reinit()
                               rhashtable_walk_enter()
                               lock(&(&ht->lock)->rlock);
  <Interrupt>
  tipc_disc_rcv()
  tipc_node_check_dest()
  tipc_node_create()
  lock(&(&tn->node_list_lock)->rlock);

 *** DEADLOCK ***

When rhashtable_rehash_table() holds ht->lock on CPU0, it doesn't
disable BH. So if an interrupt happens after the lock, it can create
an inverse lock ordering between ht->lock and tn->node_list_lock. As
a consequence, deadlock might happen.

The reason causing the inverse lock ordering scenario above is because
the initial purpose of node_list_lock is not designed to do the
serialization of node address setting.

As cmpxchg() can guarantee CAS (compare-and-swap) process is atomic,
we use it to replace node_list_lock to ensure setting node address can
be atomically finished. It turns out the potential deadlock can be
avoided as well.

Fixes: 9faa89d4ed ("tipc: make function tipc_net_finalize() thread safe")
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <maloy@donjonn.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-07 13:15:35 -07:00
Cong Wang 455f05ecd2 vsock: split dwork to avoid reinitializations
syzbot reported that we reinitialize an active delayed
work in vsock_stream_connect():

	ODEBUG: init active (active state 0) object type: timer_list hint:
	delayed_work_timer_fn+0x0/0x90 kernel/workqueue.c:1414
	WARNING: CPU: 1 PID: 11518 at lib/debugobjects.c:329
	debug_print_object+0x16a/0x210 lib/debugobjects.c:326

The pattern is apparently wrong, we should only initialize
the dealyed work once and could repeatly schedule it. So we
have to move out the initializations to allocation side.
And to avoid confusion, we can split the shared dwork
into two, instead of re-using the same one.

Fixes: d021c34405 ("VSOCK: Introduce VM Sockets")
Reported-by: <syzbot+8a9b1bd330476a4f3db6@syzkaller.appspotmail.com>
Cc: Andy king <acking@vmware.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-07 12:39:13 -07:00
Shmulik Ladkani 3789cabaab ip6_tunnel: collect_md xmit: Use ip_tunnel_key's provided src address
When using an ip6tnl device in collect_md mode, the xmit methods ignore
the ipv6.src field present in skb_tunnel_info's key, both for route
calculation purposes (flowi6 construction) and for assigning the
packet's final ipv6h->saddr.

This makes it impossible specifying a desired ipv6 local address in the
encapsulating header (for example, when using tc action tunnel_key).

This is also not aligned with behavior of ipip (ipv4) in collect_md
mode, where the key->u.ipv4.src gets used.

Fix, by assigning fl6.saddr with given key->u.ipv6.src.
In case ipv6.src is not specified, ip6_tnl_xmit uses existing saddr
selection code.

Fixes: 8d79266bc4 ("ip6_tunnel: add collect_md mode to IPv6 tunnels")
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Reviewed-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-07 12:36:46 -07:00
Vlad Buslov 9ca6163005 net: sched: cls_flower: set correct offload data in fl_reoffload
fl_reoffload implementation sets following members of struct
tc_cls_flower_offload incorrectly:
 - masked key instead of mask
 - key instead of masked key

Fix fl_reoffload to provide correct data to offload callback.

Fixes: 31533cba43 ("net: sched: cls_flower: implement offload tcf_proto_op")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-07 12:35:17 -07:00
Pieter Jansen van Vuuren 0a6e77784f net/sched: allow flower to match tunnel options
Allow matching on options in Geneve tunnel headers.
This makes use of existing tunnel metadata support.

The options can be described in the form
CLASS:TYPE:DATA/CLASS_MASK:TYPE_MASK:DATA_MASK, where CLASS is
represented as a 16bit hexadecimal value, TYPE as an 8bit
hexadecimal value and DATA as a variable length hexadecimal value.

e.g.
 # ip link add name geneve0 type geneve dstport 0 external
 # tc qdisc add dev geneve0 ingress
 # tc filter add dev geneve0 protocol ip parent ffff: \
     flower \
       enc_src_ip 10.0.99.192 \
       enc_dst_ip 10.0.99.193 \
       enc_key_id 11 \
       geneve_opts 0102:80:1122334421314151/ffff:ff:ffffffffffffffff \
       ip_proto udp \
       action mirred egress redirect dev eth1

This patch adds support for matching Geneve options in the order
supplied by the user. This leads to an efficient implementation in
the software datapath (and in our opinion hardware datapaths that
offload this feature). It is also compatible with Geneve options
matching provided by the Open vSwitch kernel datapath which is
relevant here as the Flower classifier may be used as a mechanism
to program flows into hardware as a form of Open vSwitch datapath
offload (sometimes referred to as OVS-TC). The netlink
Kernel/Userspace API may be extended, for example by adding a flag,
if other matching options are desired, for example matching given
options in any order. This would require an implementation in the
TC software datapath. And be done in a way that drivers that
facilitate offload of the Flower classifier can reject or accept
such flows based on hardware datapath capabilities.

This approach was discussed and agreed on at Netconf 2017 in Seoul.

Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-07 12:22:15 -07:00
Simon Horman 92e2c40536 flow_dissector: allow dissection of tunnel options from metadata
Allow the existing 'dissection' of tunnel metadata to 'dissect'
options already present in tunnel metadata. This dissection is
controlled by a new dissector key, FLOW_DISSECTOR_KEY_ENC_OPTS.

This dissection only occurs when skb_flow_dissect_tunnel_info()
is called, currently only the Flower classifier makes that call.
So there should be no impact on other users of the flow dissector.

This is in preparation for allowing the flower classifier to
match on Geneve options.

Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-07 12:22:14 -07:00
David S. Miller 1ba982806c Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:

====================
pull-request: bpf-next 2018-08-07

The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) Add cgroup local storage for BPF programs, which provides a fast
   accessible memory for storing various per-cgroup data like number
   of transmitted packets, etc, from Roman.

2) Support bpf_get_socket_cookie() BPF helper in several more program
   types that have a full socket available, from Andrey.

3) Significantly improve the performance of perf events which are
   reported from BPF offload. Also convert a couple of BPF AF_XDP
   samples overto use libbpf, both from Jakub.

4) seg6local LWT provides the End.DT6 action, which allows to
   decapsulate an outer IPv6 header containing a Segment Routing Header.
   Adds this action now to the seg6local BPF interface, from Mathieu.

5) Do not mark dst register as unbounded in MOV64 instruction when
   both src and dst register are the same, from Arthur.

6) Define u_smp_rmb() and u_smp_wmb() to their respective barrier
   instructions on arm64 for the AF_XDP sample code, from Brian.

7) Convert the tcp_client.py and tcp_server.py BPF selftest scripts
   over from Python 2 to Python 3, from Jeremy.

8) Enable BTF build flags to the BPF sample code Makefile, from Taeung.

9) Remove an unnecessary rcu_read_lock() in run_lwt_bpf(), from Taehee.

10) Several improvements to the README.rst from the BPF documentation
    to make it more consistent with RST format, from Tobin.

11) Replace all occurrences of strerror() by calls to strerror_r()
    in libbpf and fix a FORTIFY_SOURCE build error along with it,
    from Thomas.

12) Fix a bug in bpftool's get_btf() function to correctly propagate
    an error via PTR_ERR(), from Yue.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-07 11:02:05 -07:00
Pablo Neira Ayuso f699edb12a netfilter: nft_ct: enable conntrack for helpers
Enable conntrack if the user defines a helper to be used from the
ruleset policy.

Fixes: 1a64edf54f ("netfilter: nft_ct: add helper set support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-08-07 17:14:27 +02:00
Harsha Sharma 7e0b2b57f0 netfilter: nft_ct: add ct timeout support
This patch allows to add, list and delete connection tracking timeout
policies via nft objref infrastructure and assigning these timeout
via nft rule.

%./libnftnl/examples/nft-ct-timeout-add ip raw cttime tcp

Ruleset:

table ip raw {
   ct timeout cttime {
       protocol tcp;
       policy = {established: 111, close: 13 }
   }

   chain output {
       type filter hook output priority -300; policy accept;
       ct timeout set "cttime"
   }
}

%./libnftnl/examples/nft-rule-ct-timeout-add ip raw output cttime

%conntrack -E
[NEW] tcp      6 111 ESTABLISHED src=172.16.19.128 dst=172.16.19.1
sport=22 dport=41360 [UNREPLIED] src=172.16.19.1 dst=172.16.19.128
sport=41360 dport=22

%nft delete rule ip raw output handle <handle>
%./libnftnl/examples/nft-ct-timeout-del ip raw cttime

Joint work with Pablo Neira.

Signed-off-by: Harsha Sharma <harshasharmaiitr@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-08-07 17:14:23 +02:00
Pablo Neira Ayuso 6c1fd7dc48 netfilter: cttimeout: decouple timeout policy from nfnetlink_cttimeout object
The timeout policy is currently embedded into the nfnetlink_cttimeout
object, move the policy into an independent object. This allows us to
reuse part of the existing conntrack timeout extension from nf_tables
without adding dependencies with the nfnetlink_cttimeout object layout.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-08-07 17:14:15 +02:00
Harsha Sharma 4e665afbd7 netfilter: cttimeout: move ctnl_untimeout to nf_conntrack
As, ctnl_untimeout is required by nft_ct, so move ctnl_timeout from
nfnetlink_cttimeout to nf_conntrack_timeout and rename as nf_ct_timeout.

Signed-off-by: Harsha Sharma <harshasharmaiitr@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-08-07 17:14:10 +02:00
Fernando Fernandez Mancera 35a8a3bd1c netfilter: nft_osf: use NFT_OSF_MAXGENRELEN instead of IFNAMSIZ
As no "genre" on pf.os exceed 16 bytes of length, we reduce
NFT_OSF_MAXGENRELEN parameter to 16 bytes and use it instead of IFNAMSIZ.

Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-08-07 17:14:04 +02:00
Willem de Bruijn 4576cd469d packet: refine ring v3 block size test to hold one frame
TPACKET_V3 stores variable length frames in fixed length blocks.
Blocks must be able to store a block header, optional private space
and at least one minimum sized frame.

Frames, even for a zero snaplen packet, store metadata headers and
optional reserved space.

In the block size bounds check, ensure that the frame of the
chosen configuration fits. This includes sockaddr_ll and optional
tp_reserve.

Syzbot was able to construct a ring with insuffient room for the
sockaddr_ll in the header of a zero-length frame, triggering an
out-of-bounds write in dev_parse_header.

Convert the comparison to less than, as zero is a valid snap len.
This matches the test for minimum tp_frame_size immediately below.

Fixes: f6fb8f100b ("af-packet: TPACKET_V3 flexible buffer implementation.")
Fixes: eb73190f4f ("net/packet: refine check for priv area size")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-06 13:48:33 -07:00
David S. Miller de7de576ec Merge branch 'ieee802154-for-davem-2018-08-06' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan-next
Stefan Schmidt says:

====================
pull-request: ieee802154-next 2018-08-06

An update from ieee802154 for *net-next*

Romuald added a socket option to get the LQI value of the received datagram.
Alexander added a new hardware simulation driver modelled after hwsim of the
wireless people. It allows runtime configuration for new nodes and edges over a
netlink interface (a config utlity is making its way into wpan-tools).
We also have three fixes in here. One from Colin which is more of a cleanup and
two from Alex fixing tailroom and single frame space problems.
I would normally put the last two into my fixes tree, but given we are already
in -rc8 I simply put them here and added a cc: stable to them.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-06 13:17:48 -07:00
Dan Carpenter 70837ffe30 ipv4: frags: precedence bug in ip_expire()
We accidentally removed the parentheses here, but they are required
because '!' has higher precedence than '&'.

Fixes: fa0f527358 ("ip: use rb trees for IP frag queue.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-06 13:15:12 -07:00
Yafang Shao 9dae34978d net: avoid unnecessary sock_flag() check when enable timestamp
The sock_flag() check is alreay inside sock_enable_timestamp(), so it is
unnecessary checking it in the caller.

    void sock_enable_timestamp(struct sock *sk, int flag)
    {
        if (!sock_flag(sk, flag)) {
            ...
        }
    }

Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-06 10:42:48 -07:00
zhong jiang 9c2e955c48 net/bridge/br_multicast: remove redundant variable "err"
The err is not modified after initalization, So remove it and make
it to be void function.

Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-06 10:33:44 -07:00
YueHaibing ad3e0b2f3c Bluetooth: remove redundant variables 'adv_set' and 'cp'
Variables 'adv_set' and 'cp'  are being assigned but are never used hence
they are redundant and can be removed.

Cleans up clang warnings:
net/bluetooth/hci_event.c:1135:29: warning: variable 'adv_set' set but not used [-Wunused-but-set-variable]
net/bluetooth/mgmt.c:3359:39: warning: variable 'cp' set but not used [-Wunused-but-set-variable]

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2018-08-06 17:06:58 +03:00
Colin Ian King 4e54acb202 net: ieee802154: 6lowpan: remove redundant pointers 'fq' and 'net'
Pointers fq and net are being assigned but are never used hence they
are redundant and can be removed.

Cleans up clang warnings:
warning: variable 'fq' set but not used [-Wunused-but-set-variable]
warning: variable 'net' set but not used [-Wunused-but-set-variable]

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2018-08-06 11:21:15 +02:00
Alexander Aring f9c5283113 net: mac802154: tx: expand tailroom if necessary
This patch is necessary if case of AF_PACKET or other socket interface
which I am aware of it and didn't allocated the necessary room.

Reported-by: David Palma <david.palma@ntnu.no>
Reported-by: Rabi Narayan Sahoo <rabinarayans0828@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2018-08-06 11:21:37 +02:00
Alexander Aring ac74f87c78 net: 6lowpan: fix reserved space for single frames
This patch fixes patch add handling to take care tail and headroom for
single 6lowpan frames. We need to be sure we have a skb with the right
head and tailroom for single frames. This patch do it by using
skb_copy_expand() if head and tailroom is not enough allocated by upper
layer.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195059
Reported-by: David Palma <david.palma@ntnu.no>
Reported-by: Rabi Narayan Sahoo <rabinarayans0828@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2018-08-06 11:21:15 +02:00
Stefan Schmidt a304610803 Merge remote-tracking branch 'net-next/master' 2018-08-06 09:04:48 +02:00
Xin Long 82a40777de ip6_tunnel: use the right value for ipv4 min mtu check in ip6_tnl_xmit
According to RFC791, 68 bytes is the minimum size of IPv4 datagram every
device must be able to forward without further fragmentation while 576
bytes is the minimum size of IPv4 datagram every device has to be able
to receive, so in ip6_tnl_xmit(), 68(IPV4_MIN_MTU) should be the right
value for the ipv4 min mtu check in ip6_tnl_xmit.

While at it, change to use max() instead of if statement.

Fixes: c9fefa0819 ("ip6_tunnel: get the min mtu properly in ip6_tnl_xmit")
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-05 17:35:02 -07:00
David S. Miller 6277547f33 Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Johan Hedberg says:

====================
pull request: bluetooth-next 2018-08-05

Here's the main bluetooth-next pull request for the 4.19 kernel.

 - Added support for Bluetooth Advertising Extensions
 - Added vendor driver support to hci_h5 HCI driver
 - Added serdev support to hci_h5 driver
 - Added support for Qualcomm wcn3990 controller
 - Added support for RTL8723BS and RTL8723DS controllers
 - btusb: Added new ID for Realtek 8723DE
 - Several other smaller fixes & cleanups

Please let me know if there are any issues pulling. Thanks.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-05 17:29:27 -07:00
Dan Carpenter 1cbc36a53b net: sched: cls_flower: Fix an error code in fl_tmplt_create()
We forgot to set the error code on this path, so we return NULL instead
of an error pointer.  In the current code kzalloc() won't fail for small
allocations so this doesn't really affect runtime.

Fixes: b95ec7eb3b ("net: sched: cls_flower: implement chain templates")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-05 17:25:46 -07:00
Li RongQing a6bcfc8969 net: check extack._msg before print
dev_set_mtu_ext is able to fail with a valid mtu value, at that
condition, extack._msg is not set and random since it is in stack,
then kernel will crash when print it.

Fixes: 7a4c53bee3 ("net: report invalid mtu value via netlink extack")
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-05 17:24:45 -07:00
Cong Wang e70a3aad44 ipv6: fix double refcount of fib6_metrics
All the callers of ip6_rt_copy_init()/rt6_set_from() hold refcnt
of the "from" fib6_info, so there is no need to hold fib6_metrics
refcnt again, because fib6_metrics refcnt is only released when
fib6_info is gone, that is, they have the same life time, so the
whole fib6_metrics refcnt can be removed actually.

This fixes a kmemleak warning reported by Sabrina.

Fixes: 93531c6743 ("net/ipv6: separate handling of FIB entries from dst based routes")
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Cc: Sabrina Dubroca <sd@queasysnail.net>
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-05 17:22:45 -07:00
Florian Westphal 0ed4229b08 ipv6: defrag: drop non-last frags smaller than min mtu
don't bother with pathological cases, they only waste cycles.
IPv6 requires a minimum MTU of 1280 so we should never see fragments
smaller than this (except last frag).

v3: don't use awkward "-offset + len"
v2: drop IPv4 part, which added same check w. IPV4_MIN_MTU (68).
    There were concerns that there could be even smaller frags
    generated by intermediate nodes, e.g. on radio networks.

Cc: Peter Oskolkov <posk@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-05 17:21:14 -07:00
Peter Oskolkov fa0f527358 ip: use rb trees for IP frag queue.
Similar to TCP OOO RX queue, it makes sense to use rb trees to store
IP fragments, so that OOO fragments are inserted faster.

Tested:

- a follow-up patch contains a rather comprehensive ip defrag
  self-test (functional)
- ran neper `udp_stream -c -H <host> -F 100 -l 300 -T 20`:
    netstat --statistics
    Ip:
        282078937 total packets received
        0 forwarded
        0 incoming packets discarded
        946760 incoming packets delivered
        18743456 requests sent out
        101 fragments dropped after timeout
        282077129 reassemblies required
        944952 packets reassembled ok
        262734239 packet reassembles failed
   (The numbers/stats above are somewhat better re:
    reassemblies vs a kernel without this patchset. More
    comprehensive performance testing TBD).

Reported-by: Jann Horn <jannh@google.com>
Reported-by: Juha-Matti Tilli <juha-matti.tilli@iki.fi>
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Peter Oskolkov <posk@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-05 17:16:46 -07:00
Peter Oskolkov 385114dec8 net: modify skb_rbtree_purge to return the truesize of all purged skbs.
Tested: see the next patch is the series.

Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Peter Oskolkov <posk@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-05 17:16:46 -07:00
Peter Oskolkov 7969e5c40d ip: discard IPv4 datagrams with overlapping segments.
This behavior is required in IPv6, and there is little need
to tolerate overlapping fragments in IPv4. This change
simplifies the code and eliminates potential DDoS attack vectors.

Tested: ran ip_defrag selftest (not yet available uptream).

Suggested-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Peter Oskolkov <posk@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Florian Westphal <fw@strlen.de>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-05 17:16:46 -07:00
Vakul Garg cfb4099fb4 net/tls: Mark the end in scatterlist table
Function zerocopy_from_iter() unmarks the 'end' in input sgtable while
adding new entries in it. The last entry in sgtable remained unmarked.
This results in KASAN error report on using apis like sg_nents(). Before
returning, the function needs to mark the 'end' in the last entry it
adds.

Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Acked-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-05 17:13:58 -07:00
Georg Kohmann 5f379ef51b ipv6: icmp: Updating pmtu for link local route
When a ICMPV6_PKT_TOOBIG is received from a link local address the pmtu will
be updated on a route with an arbitrary interface index. Subsequent packets
sent back to the same link local address may therefore end up not
considering the updated pmtu.

Current behavior breaks TAHI v6LC4.1.4 Reduce PMTU On-link. Referring to RFC
1981: Section 3: "Note that Path MTU Discovery must be performed even in
cases where a node "thinks" a destination is attached to the same link as
itself. In a situation such as when a neighboring router acts as proxy [ND]
for some destination, the destination can to appear to be directly
connected but is in fact more than one hop away."

Using the interface index from the incoming ICMPV6_PKT_TOOBIG when updating
the pmtu.

Signed-off-by: Georg Kohmann <geokohma@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-05 17:12:44 -07:00
David S. Miller 074fb88016 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next
Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

The following patchset contains Netfilter updates for your net-next tree:

1) Support for transparent proxying for nf_tables, from Mate Eckl.

2) Patchset to add OS passive fingerprint recognition for nf_tables,
   from Fernando Fernandez. This takes common code from xt_osf and
   place it into the new nfnetlink_osf module for codebase sharing.

3) Lightweight tunneling support for nf_tables.

4) meta and lookup are likely going to be used in rulesets, make them
   direct calls. From Florian Westphal.

A bunch of incremental updates:

5) use PTR_ERR_OR_ZERO() from nft_numgen, from YueHaibing.

6) Use kvmalloc_array() to allocate hashtables, from Li RongQing.

7) Explicit dependencies between nfnetlink_cttimeout and conntrack
   timeout extensions, from Harsha Sharma.

8) Simplify NLM_F_CREATE handling in nf_tables.

9) Removed unused variable in the get element command, from
   YueHaibing.

10) Expose bridge hook priorities through uapi, from Mate Eckl.

And a few fixes for previous Netfilter batch for net-next:

11) Use per-netns mutex from flowtable event, from Florian Westphal.

12) Remove explicit dependency on iptables CT target from conntrack
    zones, from Florian.

13) Fix use-after-free in rmmod nf_conntrack path, also from Florian.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-05 16:25:22 -07:00
David S. Miller c1c8626fce Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/net
Lots of overlapping changes, mostly trivial in nature.

The mlxsw conflict was resolving using the example
resolution at:

https://github.com/jpirko/linux_mlxsw/blob/combined_queue/drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_actions.c

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-05 13:04:31 -07:00
Dmitry Safonov 91874ecf32 netlink: Don't shift on 64 for ngroups
It's legal to have 64 groups for netlink_sock.

As user-supplied nladdr->nl_groups is __u32, it's possible to subscribe
only to first 32 groups.

The check for correctness of .bind() userspace supplied parameter
is done by applying mask made from ngroups shift. Which broke Android
as they have 64 groups and the shift for mask resulted in an overflow.

Fixes: 61f4b23769 ("netlink: Don't shift with UB on nlk->ngroups")
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: netdev@vger.kernel.org
Cc: stable@vger.kernel.org
Reported-and-Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-04 17:52:51 -07:00
David S. Miller 5dbfb6eca0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:

====================
pull-request: bpf 2018-08-05

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix bpftool percpu_array dump by using correct roundup to next
   multiple of 8 for the value size, from Yonghong.

2) Fix in AF_XDP's __xsk_rcv_zc() to not returning frames back to
   allocator since driver will recycle frame anyway in case of an
   error, from Jakub.

3) Fix up BPF test_lwt_seg6local test cases to final iproute2
   syntax, from Mathieu.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-04 17:51:55 -07:00
Ursula Braun 5607016cd1 net/smc: no cursor update send in state SMC_INIT
If a writer blocked condition is received without data, the current
consumer cursor is immediately sent. Servers could already receive this
condition in state SMC_INIT without finished tx-setup. This patch
avoids sending a consumer cursor update in this case.

Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-04 13:09:33 -07:00
zhong jiang 07d53ae4fb net: Remove some unneeded semicolon
These semicolons are not needed.  Just remove them.

Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-04 13:05:39 -07:00
YueHaibing a01512b14d tcp: remove unneeded variable 'err'
variable 'err' is unmodified after initalization,
so simply cleans up it and returns 0.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-03 16:52:07 -07:00
Jason Baron 51f7e95187 af_unix: ensure POLLOUT on remote close() for connected dgram socket
Applications use -ECONNREFUSED as returned from write() in order to
determine that a socket should be closed. However, when using connected
dgram unix sockets in a poll/write loop, a final POLLOUT event can be
missed when the remote end closes. Thus, the poll is stuck forever:

          thread 1 (client)                   thread 2 (server)

connect() to server
write() returns -EAGAIN
unix_dgram_poll()
 -> unix_recvq_full() is true
                                       close()
                                        ->unix_release_sock()
                                         ->wake_up_interruptible_all()
unix_dgram_poll() (due to the
     wake_up_interruptible_all)
 -> unix_recvq_full() still is true
                                         ->free all skbs

Now thread 1 is stuck and will not receive anymore wakeups. In this
case, when thread 1 gets the -EAGAIN, it has not queued any skbs
otherwise the 'free all skbs' step would in fact cause a wakeup and
a POLLOUT return. So the race here is probably fairly rare because
it means there are no skbs that thread 1 queued and that thread 1
schedules before the 'free all skbs' step.

This issue was reported as a hang when /dev/log is closed.

The fix is to signal POLLOUT if the socket is marked as SOCK_DEAD, which
means a subsequent write() will get -ECONNREFUSED.

Reported-by: Ian Lance Taylor <iant@golang.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Rainer Weikusat <rweikusat@mobileactivedefense.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-03 16:44:19 -07:00
Pablo Neira Ayuso 483f3fdcc7 netfilter: nft_tunnel: fix sparse errors
[...]
net/netfilter/nft_tunnel.c:117:25:    expected unsigned int [unsigned] [usertype] flags
net/netfilter/nft_tunnel.c:117:25:    got restricted __be16 [usertype] <noident>
[...]
net/netfilter/nft_tunnel.c:246:33:    expected restricted __be16 [addressable] [assigned] [usertype] tp_dst
net/netfilter/nft_tunnel.c:246:33:    got int

Fixes: af308b94a2 ("netfilter: nf_tables: add tunnel support")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-08-04 00:53:29 +02:00
David Howells eb9950eb31 rxrpc: Push iov_iter up from rxrpc_kernel_recv_data() to caller
Push iov_iter up from rxrpc_kernel_recv_data() to its caller to allow
non-contiguous iovs to be passed down, thereby permitting file reading to
be simplified in the AFS filesystem in a future patch.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-03 12:46:20 -07:00
Guillaume Nault f664e37dcc l2tp: fix missing refcount drop in pppol2tp_tunnel_ioctl()
If 'session' is not NULL and is not a PPP pseudo-wire, then we fail to
drop the reference taken by l2tp_session_get().

Fixes: ecd012e45a ("l2tp: filter out non-PPP sessions in pppol2tp_tunnel_ioctl()")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-03 12:39:01 -07:00
Florian Westphal 020f6cc5f7 netfilter: conntrack: avoid use-after free on rmmod
When the conntrack module is removed, we call nf_ct_iterate_destroy via
nf_ct_l4proto_unregister().

Problem is that nf_conntrack_proto_fini() gets called after the
conntrack hash table has already been freed.

Just remove the l4proto unregister call, its unecessary as the
nf_ct_protos[] array gets free'd right after anyway.

v2: add comment wrt. missing unreg call.

Fixes: a0ae2562c6 ("netfilter: conntrack: remove l3proto abstraction")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-08-03 21:15:13 +02:00
Florian Westphal 7bdfcea875 netfilter: kconfig: remove ct zone/label dependencies
connection tracking zones currently depend on the xtables CT target.
The reasoning was that it makes no sense to support zones if they can't
be configured (which needed CT target).

Nowadays zones can also be used by OVS and configured via nftables,
so remove the dependency.

connection tracking labels are handled via hidden dependency that gets
auto-selected by the connlabel match.
Make it a visible knob, as labels can be attached via ctnetlink
or via nftables rules (nft_ct expression) too.

This allows to use conntrack labels and zones with nftables-only build.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-08-03 21:15:12 +02:00
Pablo Neira Ayuso 445509eb9b netfilter: nf_tables: simplify NLM_F_CREATE handling
* From nf_tables_newchain(), codepath provides context that allows us to
  infer if we are updating a chain (in that case, no module autoload is
  required) or adding a new one (then, module autoload is indeed
  needed).
* We only need it in one single spot in nf_tables_newrule().
* Not needed for nf_tables_newset() at all.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-08-03 21:15:11 +02:00
Máté Eckl 94276fa8a2 netfilter: bridge: Expose nf_tables bridge hook priorities through uapi
Netfilter exposes standard hook priorities in case of ipv4, ipv6 and
arp but not in case of bridge.

This patch exposes the hook priority values of the bridge family (which are
different from the formerly mentioned) via uapi so that they can be used by
user-space applications just like the others.

Signed-off-by: Máté Eckl <ecklm94@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-08-03 21:15:09 +02:00
Pablo Neira Ayuso aaecfdb5c5 netfilter: nf_tables: match on tunnel metadata
This patch allows us to match on the tunnel metadata that is available
of the packet. We can use this to validate if the packet comes from/goes
to tunnel and the corresponding tunnel ID.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-08-03 21:12:19 +02:00
Pablo Neira Ayuso af308b94a2 netfilter: nf_tables: add tunnel support
This patch implements the tunnel object type that can be used to
configure tunnels via metadata template through the existing lightweight
API from the ingress path.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-08-03 21:12:12 +02:00
Máté Eckl 033eab53ff netfilter: nft_tproxy: Add missing config check
A config check was missing form the code when using
nf_defrag_ipv6_enable with NFT_TPROXY != n and NF_DEFRAG_IPV6 = n and
this caused the following error:

../net/netfilter/nft_tproxy.c: In function 'nft_tproxy_init':
../net/netfilter/nft_tproxy.c:237:3: error: implicit declaration of function
+'nf_defrag_ipv6_enable' [-Werror=implicit-function-declaration]
   err = nf_defrag_ipv6_enable(ctx->net);

This patch adds a check for NF_TABLES_IPV6 when NF_DEFRAG_IPV6 is
selected by Kconfig.

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: 4ed8eb6570 ("netfilter: nf_tables: Add native tproxy support")
Signed-off-by: Máté Eckl <ecklm94@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-08-03 20:20:53 +02:00
Guillaume Nault e9697e2eff l2tp: ignore L2TP_ATTR_MTU
This attribute's handling is broken. It can only be used when creating
Ethernet pseudo-wires, in which case its value can be used as the
initial MTU for the l2tpeth device.
However, when handling update requests, L2TP_ATTR_MTU only modifies
session->mtu. This value is never propagated to the l2tpeth device.
Dump requests also return the value of session->mtu, which is not
synchronised anymore with the device MTU.

The same problem occurs if the device MTU is properly updated using the
generic IFLA_MTU attribute. In this case, session->mtu is not updated,
and L2TP_ATTR_MTU will report an invalid value again when dumping the
session.

It does not seem worthwhile to complexify l2tp_eth.c to synchronise
session->mtu with the device MTU. Even the ip-l2tp manpage advises to
use 'ip link' to initialise the MTU of l2tpeth devices (iproute2 does
not handle L2TP_ATTR_MTU at all anyway). So let's just ignore it
entirely.

Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-03 10:03:57 -07:00
Guillaume Nault 789141b215 l2tp: simplify MTU handling in l2tp_ppp
The value of the session's .mtu field, as defined by
pppol2tp_connect() or pppol2tp_session_create(), is later overwritten
by pppol2tp_session_init() (unless getting the tunnel's socket PMTU
fails). This field is then only used when setting the PPP channel's MTU
in pppol2tp_connect().
Furthermore, the SIOC[GS]IFMTU ioctls only act on the session's .mtu
without propagating this value to the PPP channel, making them useless.

This patch initialises the PPP channel's MTU directly and ignores the
session's .mtu entirely. MTU is still computed by subtracting the
PPPOL2TP_HEADER_OVERHEAD constant. It is not optimal, but that doesn't
really matter: po->chan.mtu is only used when the channel is part of a
multilink PPP bundle. Running multilink PPP over packet switched
networks is certainly not going to be efficient, so not picking the
best MTU does not harm (in the worst case, packets will just be
fragmented by the underlay).

The SIOC[GS]IFMTU ioctls are removed entirely (as opposed to simply
ignored), because these ioctls commands are part of the requests that
should be handled generically by the socket layer. PX_PROTO_OL2TP was
the only socket type abusing these ioctls.

Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-03 10:03:57 -07:00
Guillaume Nault 1f5cd2a010 l2tp: define l2tp_tunnel_dst_mtu()
Consolidate retrieval of tunnel's socket mtu in order to simplify
l2tp_eth and l2tp_ppp a bit.

Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-03 10:03:57 -07:00
Harsha Sharma c753032690 netfilter: cttimeout: Make NF_CT_NETLINK_TIMEOUT depend on NF_CONNTRACK_TIMEOUT
With this, remove ifdef for CONFIG_NF_CONNTRACK_TIMEOUT in
nfnetlink_cttimeout. This is also required for moving ctnl_untimeout
from nfnetlink_cttimeout to nf_conntrack_timeout.

Signed-off-by: Harsha Sharma <harshasharmaiitr@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-08-03 18:50:41 +02:00
YueHaibing 1974d2453f netfilter: nf_tables: remove unused variable
Variable 'ext' is being assigned but are never used hence they are
unused and can be removed.

Cleans up clang warnings:
net/netfilter/nf_tables_api.c:4032:28: warning: variable ‘ext’ set but not used [-Wunused-but-set-variable]

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-08-03 18:50:35 +02:00
Kees Cook 54424d3891 rxrpc: Reuse SKCIPHER_REQUEST_ON_STACK buffer
The use of SKCIPHER_REQUEST_ON_STACK() will trigger FRAME_WARN warnings
(when less than 2048) once the VLA is no longer hidden from the check:

net/rxrpc/rxkad.c:398:1: warning: the frame size of 1152 bytes is larger than 1024 bytes [-Wframe-larger-than=]
net/rxrpc/rxkad.c:242:1: warning: the frame size of 1152 bytes is larger than 1024 bytes [-Wframe-larger-than=]

This passes the initial SKCIPHER_REQUEST_ON_STACK allocation to the leaf
functions for reuse. Two requests allocated on the stack is not needed
when only one is used at a time.

Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-03 09:48:12 -07:00
Jiri Pirko 5ca8a25c14 net: sched: fix flush on non-existing chain
User was able to perform filter flush on chain 0 even if it didn't have
any filters in it. With the patch that avoided implicit chain 0
creation, this changed. So in case user wants filter flush on chain
which does not exist, just return success. There's no reason for non-0
chains to behave differently than chain 0, so do the same for them.

Reported-by: Ido Schimmel <idosch@mellanox.com>
Fixes: f71e0ca4db ("net: sched: Avoid implicit chain 0 creation")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-03 09:44:37 -07:00
Florian Westphal 9e619d87b2 netfilter: nf_tables: flow event notifier must use transaction mutex
Fixes: f102d66b33 ("netfilter: nf_tables: use dedicated mutex to guard transactions")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-08-03 18:38:31 +02:00
Fernando Fernandez Mancera ddba40be59 netfilter: nfnetlink_osf: rename nf_osf header file to nfnetlink_osf
The first client of the nf_osf.h userspace header is nft_osf, coming in
this batch, rename it to nfnetlink_osf.h as there are no userspace
clients for this yet, hence this looks consistent with other nfnetlink
subsystem.

Suggested-by: Jan Engelhardt <jengelh@inai.de>
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-08-03 18:38:30 +02:00
Li RongQing 285189c78e netfilter: use kvmalloc_array to allocate memory for hashtable
nf_ct_alloc_hashtable is used to allocate memory for conntrack,
NAT bysrc and expectation hashtable. Assuming 64k bucket size,
which means 7th order page allocation, __get_free_pages, called
by nf_ct_alloc_hashtable, will trigger the direct memory reclaim
and stall for a long time, when system has lots of memory stress

so replace combination of __get_free_pages and vzalloc with
kvmalloc_array, which provides a overflow check and a fallback
if no high order memory is available, and do not retry to reclaim
memory, reduce stall

and remove nf_ct_free_hashtable, since it is just a kvfree

Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Signed-off-by: Wang Li <wangli39@baidu.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-08-03 18:37:55 +02:00
Eric Biggers 8c30fbe63e crypto: scatterwalk - remove 'chain' argument from scatterwalk_crypto_chain()
All callers pass chain=0 to scatterwalk_crypto_chain().

Remove this unneeded parameter.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-08-03 18:06:03 +08:00
Roman Gushchin f42ee093be bpf/test_run: support cgroup local storage
Allocate a temporary cgroup storage to use for bpf program test runs.

Because the test program is not actually attached to a cgroup,
the storage is allocated manually just for the execution
of the bpf program.

If the program is executed multiple times, the storage is not zeroed
on each run, emulating multiple runs of the program, attached to
a real cgroup.

Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-03 00:47:32 +02:00
Roman Gushchin cd33943176 bpf: introduce the bpf_get_local_storage() helper function
The bpf_get_local_storage() helper function is used
to get a pointer to the bpf local storage from a bpf program.

It takes a pointer to a storage map and flags as arguments.
Right now it accepts only cgroup storage maps, and flags
argument has to be 0. Further it can be extended to support
other types of local storage: e.g. thread local storage etc.

Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-03 00:47:32 +02:00
Matthieu Baerts 6b431d50d2 net/socket: remove duplicated init code
This refactoring work has been started by David Howells in cdfbabfb2f
(net: Work around lockdep limitation in sockets that use sockets) but
the exact same day in 581319c586 (net/socket: use per af lockdep
classes for sk queues), Paolo Abeni added new classes.

This reduces the amount of (nearly) duplicated code and eases the
addition of new socket types.

Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-02 14:47:49 -07:00
Ilya Dryomov f1d10e0463 libceph: weaken sizeof check in ceph_x_verify_authorizer_reply()
Allow for extending ceph_x_authorize_reply in the future.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
2018-08-02 21:33:26 +02:00
Ilya Dryomov 130f52f2b2 libceph: check authorizer reply/challenge length before reading
Avoid scribbling over memory if the received reply/challenge is larger
than the buffer supplied with the authorizer.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
2018-08-02 21:33:26 +02:00
Ilya Dryomov cc255c76c7 libceph: implement CEPHX_V2 calculation mode
Derive the signature from the entire buffer (both AES cipher blocks)
instead of using just the first half of the first block, leaving out
data_crc entirely.

This addresses CVE-2018-1129.

Link: http://tracker.ceph.com/issues/24837
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
2018-08-02 21:33:25 +02:00
Ilya Dryomov 6daca13d2e libceph: add authorizer challenge
When a client authenticates with a service, an authorizer is sent with
a nonce to the service (ceph_x_authorize_[ab]) and the service responds
with a mutation of that nonce (ceph_x_authorize_reply).  This lets the
client verify the service is who it says it is but it doesn't protect
against a replay: someone can trivially capture the exchange and reuse
the same authorizer to authenticate themselves.

Allow the service to reject an initial authorizer with a random
challenge (ceph_x_authorize_challenge).  The client then has to respond
with an updated authorizer proving they are able to decrypt the
service's challenge and that the new authorizer was produced for this
specific connection instance.

The accepting side requires this challenge and response unconditionally
if the client side advertises they have CEPHX_V2 feature bit.

This addresses CVE-2018-1128.

Link: http://tracker.ceph.com/issues/24836
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
2018-08-02 21:33:24 +02:00
Ilya Dryomov 149cac4a50 libceph: factor out encrypt_authorizer()
Will be used for encrypting both the initial and updated authorizers.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
2018-08-02 21:33:24 +02:00
Ilya Dryomov c571fe24d2 libceph: factor out __ceph_x_decrypt()
Will be used for decrypting the server challenge which is only preceded
by ceph_x_encrypt_header.

Drop struct_v check to allow for extending ceph_x_encrypt_header in the
future.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
2018-08-02 21:33:23 +02:00
Ilya Dryomov c0f56b483a libceph: factor out __prepare_write_connect()
Will be used for sending ceph_msg_connect with an updated authorizer,
after the server challenges the initial authorizer.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
2018-08-02 21:33:22 +02:00
Ilya Dryomov 262614c429 libceph: store ceph_auth_handshake pointer in ceph_connection
We already copy authorizer_reply_buf and authorizer_reply_buf_len into
ceph_connection.  Factoring out __prepare_write_connect() requires two
more: authorizer_buf and authorizer_buf_len.  Store the pointer to the
handshake in con->auth rather than piling on.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
2018-08-02 21:33:22 +02:00
Stephen Hemminger 24e1dd6afd ceph: fix whitespace
Remove blank lines at end of file and trailing whitespace.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-02 21:33:21 +02:00
Arnd Bergmann fac02ddf91 libceph: use timespec64 for r_mtime
The request mtime field is used all over ceph, and is currently
represented as a 'timespec' structure in Linux. This changes it to
timespec64 to allow times beyond 2038, modifying all users at the
same time.

[ Remove now redundant ts variable in writepage_nounlock(). ]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-02 21:33:14 +02:00
Arnd Bergmann 473bd2d780 libceph: use timespec64 in for keepalive2 and ticket validity
ceph_con_keepalive_expired() is the last user of timespec_add() and some
of the last uses of ktime_get_real_ts().  Replacing this with timespec64
based interfaces  lets us remove that deprecated API.

I'm introducing new ceph_encode_timespec64()/ceph_decode_timespec64()
here that take timespec64 structures and convert to/from ceph_timespec,
which is defined to have an unsigned 32-bit tv_sec member. This extends
the range of valid times to year 2106, avoiding the year 2038 overflow.

The ceph file system portion still uses the old functions for inode
timestamps, this will be done separately after the VFS layer is converted.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-02 21:26:12 +02:00
Ilya Dryomov 2f56b6bae7 libceph: amend "bad option arg" error message
Don't mention "mount" -- in the rbd case it is "mapping".

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-02 21:26:11 +02:00
Chengguang Xu 17173c82e3 libceph: stop parsing when a bad int arg is detected
There is no reason to continue option parsing after detecting
bad option.

[ Return match_int() errors from ceph_parse_options() to match the
  behaviour of parse_rbd_opts_token() and parse_fsopt_token(). ]

Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-02 21:26:11 +02:00
Ilya Dryomov 6d54228fd1 libceph: make ceph_osdc_notify{,_ack}() payload_len u32
The wire format dictates that payload_len fits into 4 bytes.  Take u32
instead of size_t to reflect that.

All callers pass a small integer, so no changes required.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-02 21:26:11 +02:00
David S. Miller 89b1698c93 Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/net
The BTF conflicts were simple overlapping changes.

The virtio_net conflict was an overlap of a fix of statistics counter,
happening alongisde a move over to a bonafide statistics structure
rather than counting value on the stack.

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-02 10:55:32 -07:00
Ganesh Goudar 9aba2f801e net: Fix coding style in skb_push()
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-02 10:29:25 -07:00
Wei Yongjun 770b26de1e rxrpc: Remove set but not used variable 'nowj'
Fixes gcc '-Wunused-but-set-variable' warning:

net/rxrpc/proc.c: In function 'rxrpc_call_seq_show':
net/rxrpc/proc.c:66:29: warning:
 variable 'nowj' set but not used [-Wunused-but-set-variable]
  unsigned long timeout = 0, nowj;
                             ^

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-02 10:18:20 -07:00
David S. Miller e6aed040ea Revert "net/ipv6: fix metrics leak"
This reverts commit df18b50448.

This change causes other problems and use-after-free situations as
found by syzbot.

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01 21:32:30 -07:00
David S. Miller b69ab96ab1 RxRPC development
-----BEGIN PGP SIGNATURE-----
 
 iQIVAwUAW2GoxPu3V2unywtrAQJf6A//TXRbmUri7DBFXf5iDPaA7ItPFG0wBmmu
 E68/SAMsWZsYnpAY5HGIDufjjdvPl9R7TMSsurIyZl1ZMwzwFiO7LtK5pXvfe17a
 UJbZc1jPRn8sUuC3bDhRlAtLETqw9Wx0n9GAbLW06XdQsrwnBrg4yGA6HUc2iy8w
 l0b56G9VhPV27hgKDIvhtkL4c+Ek8qjV6f6bcPSGNtmoepPVh9Jg0fJY7zZbRWm4
 tFiPv1nTd/ojQm0MMsyPodCkK+oG3tCji17fy0ZYiXv2nupBXDS6NOoNActRJ1CA
 RE3hINoeTLtm7h5hlzCEwkG1qr6QPNE9QmSoJY9aViuJTjJKlIJGa/0i2Nl0rpgu
 HLzg3ifpcrI//KywkTFVxLk1Fp/A6JZK5fNPibpXXoVB6U6Zl+BfpaHoJ7kmnODT
 xX3NbM0qRV5bbzHWnxiG1UieXDQWr7Sc+0cJslz0sTj/64ktJ4ldwJLdO5El2xrU
 QHCOIQEsB5YXTx7vAmsXDnMNDmKgnlXXzkzjcG1dJPlOvcLmtm/5HOOaum2/A7ox
 HuV6wbtHwOTr8KvZnbcsa0pMCctC0icEpbg9TyZf43zEmMdWNmep3A/vRf72fxv4
 EFCsx5jc1A3KHDc0HaK8pmTVqUxW6al56iLH5gzn/KRwqgx392iutBJ/2y5WM4Z0
 8kzM5XMDpQg=
 =pQXe
 -----END PGP SIGNATURE-----

Merge tag 'rxrpc-next-20180801' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs

David Howells says:

====================
rxrpc: Development

Here are some patches that add some more tracepoints to AF_RXRPC and fix
some issues therein.  The most significant points are:

 (1) Display the call timeout information in /proc/net/rxrpc/calls.

 (2) Save the call's debug_id in the rxrpc_channel struct so that it can be
     used in traces after the rxrpc_call struct has been destroyed.

 (3) Increase the size of the kAFS Rx window from 32 to 63 to be about the
     same as the Auristor server.

 (4) Propose the terminal ACK for a client call after it has received all
     its data to be transmitted after a short interval so that it will get
     transmitted if not first superseded by a new call on the same channel.

 (5) Flush ACKs during the data reception if we detect that we've run out
     of data.[*]

 (6) Trace successful packet transmission and softirq to process context
     socket notification.

[*] Note that on a uncontended gigabit network, rxrpc runs in to trouble
    with ACK packets getting batched together (up to ~32 at a time)
    somewhere between the IP transmit queue on the client and the ethernet
    receive queue on the server.

    I can see the kernel afs filesystem client and Auristor userspace
    server stalling occasionally on a 512MB single read.  Sticking
    tracepoints in the network driver at either end seems to show that,
    although the ACK transmissions made by the client are reasonably spaced
    timewise, the received ACKs come in batches from the network card on
    the server.

    I'm not sure what, if anything, can be done about this.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01 11:50:55 -07:00
YueHaibing c01f6c9b32 rxrpc: Fix user call ID check in rxrpc_service_prealloc_one
There just check the user call ID isn't already in use, hence should
compare user_call_ID with xcall->user_call_ID, which is current
node's user_call_ID.

Fixes: 540b1c48c3 ("rxrpc: Fix deadlock between call creation and sendmsg/recvmsg")
Suggested-by: David Howells <dhowells@redhat.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01 11:49:49 -07:00
Jiri Pirko 290b1c8b1a net: sched: make tcf_chain_{get,put}() static
These are no longer used outside of cls_api.c so make them static.
Move tcf_chain_flush() to avoid fwd declaration of tcf_chain_put().

Signed-off-by: Jiri Pirko <jiri@mellanox.com>

v1->v2:
- new patch

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01 10:06:19 -07:00
Jiri Pirko 5368140730 net: sched: fix notifications for action-held chains
Chains that only have action references serve as placeholders.
Until a non-action reference is created, user should not be aware
of the chain. Also he should not receive any notifications about it.
So send notifications for the new chain only in case the chain gets
the first non-action reference. Symmetrically to that, when
the last non-action reference is dropped, send the notification about
deleted chain.

Reported-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>

v1->v2:
- made __tcf_chain_{get,put}() static as suggested by Cong

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01 10:06:19 -07:00
Jiri Pirko 3d32f4c548 net: sched: change name of zombie chain to "held_by_acts_only"
As mentioned by Cong and Jakub during the review process, it is a bit
odd to sometimes (act flow) create a new chain which would be
immediately a "zombie". So just rename it to "held_by_acts_only".

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01 10:06:19 -07:00
YueHaibing 87f70132b0 rds: remove redundant variable 'rds_ibdev'
Variable 'rds_ibdev' is being assigned but never used,
so can be removed.

fix this clang warning:
 net/rds/ib_send.c:762:24: warning: variable ‘rds_ibdev’ set but not used [-Wunused-but-set-variable]

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01 10:00:54 -07:00
YueHaibing bd707f17ef strparser: remove redundant variable 'rd_desc'
Variable 'rd_desc' is being assigned but never used,
so can be removed.

fix this clang warning:
net/strparser/strparser.c:411:20: warning: variable ‘rd_desc’ set but not used [-Wunused-but-set-variable]

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01 10:00:06 -07:00
YueHaibing 1296ee8ffc ip_gre: remove redundant variables t_hlen
After commit ffc2b6ee41 ("ip_gre: fix IFLA_MTU ignored on NEWLINK")
variable t_hlen is assigned values that are never read,
hence they are redundant and can be removed.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01 09:58:15 -07:00
Wei Yongjun 13dde04f5c tcp: remove set but not used variable 'skb_size'
Fixes gcc '-Wunused-but-set-variable' warning:

net/ipv4/tcp_output.c: In function 'tcp_collapse_retrans':
net/ipv4/tcp_output.c:2700:6: warning:
 variable 'skb_size' set but not used [-Wunused-but-set-variable]
  int skb_size, next_skb_size;
      ^

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01 09:57:09 -07:00
Wei Wang 7ec65372ca tcp: add stat of data packet reordering events
Introduce a new TCP stats to record the number of reordering events seen
and expose it in both tcp_info (TCP_INFO) and opt_stats
(SOF_TIMESTAMPING_OPT_STATS).
Application can use this stats to track the frequency of the reordering
events in addition to the existing reordering stats which tracks the
magnitude of the latest reordering event.

Note: this new stats tracks reordering events triggered by ACKs, which
could often be fewer than the actual number of packets being delivered
out-of-order.

Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01 09:56:10 -07:00
Wei Wang 7e10b6554f tcp: add dsack blocks received stats
Introduce a new TCP stat to record the number of DSACK blocks received
(RFC4989 tcpEStatsStackDSACKDups) and expose it in both tcp_info
(TCP_INFO) and opt_stats (SOF_TIMESTAMPING_OPT_STATS).

Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01 09:56:10 -07:00
Wei Wang fb31c9b9f6 tcp: add data bytes retransmitted stats
Introduce a new TCP stat to record the number of bytes retransmitted
(RFC4898 tcpEStatsPerfOctetsRetrans) and expose it in both tcp_info
(TCP_INFO) and opt_stats (SOF_TIMESTAMPING_OPT_STATS).

Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01 09:56:10 -07:00
Wei Wang ba113c3aa7 tcp: add data bytes sent stats
Introduce a new TCP stat to record the number of bytes sent
(RFC4898 tcpEStatsPerfHCDataOctetsOut) and expose it in both tcp_info
(TCP_INFO) and opt_stats (SOF_TIMESTAMPING_OPT_STATS).

Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01 09:56:10 -07:00
Wei Wang 984988aa72 tcp: add a helper to calculate size of opt_stats
This is to refactor the calculation of the size of opt_stats to a helper
function to make the code cleaner and easier for later changes.

Suggested-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01 09:56:10 -07:00
Florian Fainelli a94c689e6c net: dsa: Do not suspend/resume closed slave_dev
If a DSA slave network device was previously disabled, there is no need
to suspend or resume it.

Fixes: 2446254915 ("net: dsa: allow switch drivers to implement suspend/resume hooks")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01 09:53:45 -07:00
Petr Machata d18c5d1995 net: ipv4: Notify about changes to ip_forward_update_priority
Drivers may make offloading decision based on whether
ip_forward_update_priority is enabled or not. Therefore distribute
netevent notifications to give them a chance to react to a change.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01 09:52:30 -07:00
Petr Machata 432e05d328 net: ipv4: Control SKB reprioritization after forwarding
After IPv4 packets are forwarded, the priority of the corresponding SKB
is updated according to the TOS field of IPv4 header. This overrides any
prioritization done earlier by e.g. an skbedit action or ingress-qos-map
defined at a vlan device.

Such overriding may not always be desirable. Even if the packet ends up
being routed, which implies this is an L3 network node, an administrator
may wish to preserve whatever prioritization was done earlier on in the
pipeline.

Therefore introduce a sysctl that controls this behavior. Keep the
default value at 1 to maintain backward-compatible behavior.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01 09:52:30 -07:00
Jeremy Cline bc5b6c0b62 netlink: Fix spectre v1 gadget in netlink_create()
'protocol' is a user-controlled value, so sanitize it after the bounds
check to avoid using it for speculative out-of-bounds access to arrays
indexed by it.

This addresses the following accesses detected with the help of smatch:

* net/netlink/af_netlink.c:654 __netlink_create() warn: potential
  spectre issue 'nlk_cb_mutex_keys' [w]

* net/netlink/af_netlink.c:654 __netlink_create() warn: potential
  spectre issue 'nlk_cb_mutex_key_strings' [w]

* net/netlink/af_netlink.c:685 netlink_create() warn: potential spectre
  issue 'nl_table' [w] (local cap)

Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Jeremy Cline <jcline@redhat.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01 09:50:58 -07:00
Vincent Bernat 83ba464515 net: add helpers checking if socket can be bound to nonlocal address
The construction "net->ipv4.sysctl_ip_nonlocal_bind || inet->freebind
|| inet->transparent" is present three times and its IPv6 counterpart
is also present three times. We introduce two small helpers to
characterize these tests uniformly.

Signed-off-by: Vincent Bernat <vincent@bernat.im>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01 09:50:04 -07:00
zhong jiang 969d509003 net/tls: Use kmemdup to simplify the code
Kmemdup is better than kmalloc+memcpy. So replace them.

Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01 09:47:47 -07:00
Colin Ian King b053fcc4a1 net/tipc: remove redundant variables 'tn' and 'oport'
Variables 'tn' and 'oport'  are being assigned but are never used hence
they are redundant and can be removed.

Cleans up clang warnings:
warning: variable 'oport' set but not used [-Wunused-but-set-variable]
warning: variable 'tn' set but not used [-Wunused-but-set-variable]

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01 09:46:49 -07:00
Ka-Cheong Poon e65d4d9633 rds: Remove IPv6 dependency
This patch removes the IPv6 dependency from RDS.

Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01 09:32:35 -07:00
Ka-Cheong Poon f394ad28fe rds: rds_ib_recv_alloc_cache() should call alloc_percpu_gfp() instead
Currently, rds_ib_conn_alloc() calls rds_ib_recv_alloc_caches()
without passing along the gfp_t flag.  But rds_ib_recv_alloc_caches()
and rds_ib_recv_alloc_cache() should take a gfp_t parameter so that
rds_ib_recv_alloc_cache() can call alloc_percpu_gfp() using the
correct flag instead of calling alloc_percpu().

Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01 09:32:35 -07:00
David Howells d0b35a4203 rxrpc: Transmit more ACKs during data reception
Immediately flush any outstanding ACK on entry to rxrpc_recvmsg_data() -
which transfers data to the target buffers - if we previously had an Rx
underrun (ie. we returned -EAGAIN because we ran out of received data).
This lets the server know what we've managed to receive something.

Also flush any outstanding ACK after calling the function if it hit -EAGAIN
to let the server know we processed some data.

It might be better to send more ACKs, possibly on a time-based scheme, but
that needs some more consideration.

With this and some additional AFS patches, it is possible to get large
unencrypted O_DIRECT reads to be almost as fast as NFS over TCP.  It looks
like it might be theoretically possible to improve performance yet more for
a server running a single operation as investigation of packet timestamps
indicates that the server keeps stalling.

The issue appears to be that rxrpc runs in to trouble with ACK packets
getting batched together (up to ~32 at a time) somewhere between the IP
transmit queue on the client and the ethernet receive queue on the server.

However, this case isn't too much of a worry as even a lightly loaded
server should be receiving sufficient packet flux to flush the ACK packets
to the UDP socket.

Signed-off-by: David Howells <dhowells@redhat.com>
2018-08-01 13:28:24 +01:00
David Howells a71a2651bd rxrpc: Propose, but don't immediately transmit, the final ACK for a call
The final ACK that closes out an rxrpc call needs to be transmitted by the
client unless we're going to follow up with a DATA packet for a new call on
the same channel (which implicitly ACK's the previous call, thereby saving
an ACK).

Currently, we don't do that, so if no follow on call is immediately
forthcoming, the server will resend the last DATA packet - at which point
rxrpc_conn_retransmit_call() will be triggered and will (re)send the final
ACK.  But the server has to hold on to the last packet until the ACK is
received, thereby holding up its resources.

Fix the client side to propose a delayed final ACK, to be transmitted after
a short delay, assuming the call isn't superseded by a new one.

Signed-off-by: David Howells <dhowells@redhat.com>
2018-08-01 13:28:24 +01:00
David Howells 4075295ab8 rxrpc: Increase the size of a call's Rx window
Increase the size of a call's Rx window from 32 to 63 - ie. one less than
the size of the ring buffer.  This makes large data transfers perform
better when the Tx window on the other side is around 64 (as is the case
with Auristor's YFS fileserver).

If the server window size is ~32 or smaller, this should make no
difference.

Signed-off-by: David Howells <dhowells@redhat.com>
2018-08-01 13:28:23 +01:00
David Howells 4272d3034e rxrpc: Trace socket notification
Trace notifications from the softirq side of the socket to the
process-context side.

Signed-off-by: David Howells <dhowells@redhat.com>
2018-08-01 13:28:23 +01:00
David Howells 4764c0da69 rxrpc: Trace packet transmission
Trace successful packet transmission (kernel_sendmsg() succeeded, that is)
in AF_RXRPC.  We can share the enum that defines the transmission points
with the trace_rxrpc_tx_fail() tracepoint, so rename its constants to be
applicable to both.

Also, save the internal call->debug_id in the rxrpc_channel struct so that
it can be used in retransmission trace lines.

Signed-off-by: David Howells <dhowells@redhat.com>
2018-08-01 13:28:23 +01:00
David Howells f3f8337c9e rxrpc: Fix the trace for terminal ACK (re)transmission
Fix the trace for terminal ACK (re)transmission to put in the right
parameters.

Signed-off-by: David Howells <dhowells@redhat.com>
2018-08-01 13:28:23 +01:00
David Howells 6b97bd7a27 rxrpc: Show some more information through /proc files
Show the four current call IDs in /proc/net/rxrpc/conns.

Show the current packet Rx serial number in /proc/net/rxrpc/calls.

Signed-off-by: David Howells <dhowells@redhat.com>
2018-08-01 13:28:23 +01:00
David Howells 887763bbc3 rxrpc: Display call expect-receive-by timeout in proc
Display in /proc/net/rxrpc/calls the timeout by which a call next expects
to receive a packet.

This makes it easier to debug timeout issues.

Signed-off-by: David Howells <dhowells@redhat.com>
2018-08-01 13:28:23 +01:00
YueHaibing f597a5792a rxrpc: remove redundant variables 'sp' and 'did_discard'
Variables 'sp' and 'did_discard' are being assigned,
but are never used, hence they are redundant and can be removed.

fix following warning:

net/rxrpc/call_event.c:165:25: warning: variable 'sp' set but not used [-Wunused-but-set-variable]
net/rxrpc/conn_client.c:1054:7: warning: variable 'did_discard' set but not used [-Wunused-but-set-variable]

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2018-08-01 13:28:23 +01:00
Mark Salyzyn 7992c18810 Bluetooth: hidp: buffer overflow in hidp_process_report
CVE-2018-9363

The buffer length is unsigned at all layers, but gets cast to int and
checked in hidp_process_report and can lead to a buffer overflow.
Switch len parameter to unsigned int to resolve issue.

This affects 3.18 and newer kernels.

Signed-off-by: Mark Salyzyn <salyzyn@android.com>
Fixes: a4b1b5877b ("HID: Bluetooth: hidp: make sure input buffers are big enough")
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-bluetooth@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: security@kernel.org
Cc: kernel-team@android.com
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-08-01 09:12:35 +02:00
Eric Dumazet 4672694bd4 ipv4: frags: handle possible skb truesize change
ip_frag_queue() might call pskb_pull() on one skb that
is already in the fragment queue.

We need to take care of possible truesize change, or we
might have an imbalance of the netns frags memory usage.

IPv6 is immune to this bug, because RFC5722, Section 4,
amended by Errata ID 3089 states :

  When reassembling an IPv6 datagram, if
  one or more its constituent fragments is determined to be an
  overlapping fragment, the entire datagram (and any constituent
  fragments) MUST be silently discarded.

Fixes: 158f323b98 ("net: adjust skb->truesize in pskb_expand_head()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-31 14:41:29 -07:00
Eric Dumazet 56e2c94f05 inet: frag: enforce memory limits earlier
We currently check current frags memory usage only when
a new frag queue is created. This allows attackers to first
consume the memory budget (default : 4 MB) creating thousands
of frag queues, then sending tiny skbs to exceed high_thresh
limit by 2 to 3 order of magnitude.

Note that before commit 648700f76b ("inet: frags: use rhashtables
for reassembly units"), work queue could be starved under DOS,
getting no cpu cycles.
After commit 648700f76b, only the per frag queue timer can eventually
remove an incomplete frag queue and its skbs.

Fixes: b13d3cbfb8 ("inet: frag: move eviction of queues to work queue")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Jann Horn <jannh@google.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Peter Oskolkov <posk@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-31 14:41:29 -07:00
Christoph Hellwig e6476c2144 net: remove bogus RCU annotations on socket.wq
We never use RCU protection for it, just a lot of cargo-cult
rcu_deference_protects calls.

Note that we do keep the kfree_rcu call for it, as the references through
struct sock are RCU protected and thus might require a grace period before
freeing.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-31 12:40:22 -07:00
Stephen Hemminger 8fdee4cc95 sunrpc: whitespace fixes
Remove trailing whitespace and blank line at EOF

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-07-31 12:53:40 -04:00
Bill Baker 0f90be132c NFSv4 client live hangs after live data migration recovery
After a live data migration event at the NFS server, the client may send
I/O requests to the wrong server, causing a live hang due to repeated
recovery events.  On the wire, this will appear as an I/O request failing
with NFS4ERR_BADSESSION, followed by successful CREATE_SESSION, repeatedly.
NFS4ERR_BADSSESSION is returned because the session ID being used was
issued by the other server and is not valid at the old server.

The failure is caused by async worker threads having cached the transport
(xprt) in the rpc_task structure.  After the migration recovery completes,
the task is redispatched and the task resends the request to the wrong
server based on the old value still present in tk_xprt.

The solution is to recompute the tk_xprt field of the rpc_task structure
so that the request goes to the correct server.

Signed-off-by: Bill Baker <bill.baker@oracle.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Helen Chao <helen.chao@oracle.com>
Fixes: fb43d17210 ("SUNRPC: Use the multipath iterator to assign a ...")
Cc: stable@vger.kernel.org # v4.9+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-07-31 12:53:40 -04:00
Dan Carpenter 1a54c0cfcb sunrpc: kstrtoul() can also return -ERANGE
Smatch complains that "num" can be uninitialized when kstrtoul() returns
-ERANGE.  It's true enough, but basically harmless in this case.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-07-31 12:53:40 -04:00
Dave Wysochanski 016583d703 sunrpc: Change rpc_print_iostats to rpc_clnt_show_stats and handle rpc_clnt clones
The existing rpc_print_iostats has a few shortcomings.  First, the naming
is not consistent with other functions in the kernel that display stats.
Second, it is really displaying stats for an rpc_clnt structure as it
displays both xprt stats and per-op stats.  Third, it does not handle
rpc_clnt clones, which is important for the one in-kernel tree caller
of this function, the NFS client's nfs_show_stats function.

Fix all of the above by renaming the rpc_print_iostats to
rpc_clnt_show_stats and looping through any rpc_clnt clones via
cl_parent.

Once this interface is fixed, this addresses a problem with NFSv4.
Before this patch, the /proc/self/mountstats always showed incorrect
counts for NFSv4 lease and session related opcodes such as SEQUENCE,
RENEW, SETCLIENTID, CREATE_SESSION, etc.  These counts were always 0
even though many ops would go over the wire.  The reason for this is
there are multiple rpc_clnt structures allocated for any given NFSv4
mount, and inside nfs_show_stats() we callled into rpc_print_iostats()
which only handled one of them, nfs_server->client.  Fix these counts
by calling sunrpc's new rpc_clnt_show_stats() function, which handles
cloned rpc_clnt structs and prints the stats together.

Note that one side-effect of the above is that multiple mounts from
the same NFS server will show identical counts in the above ops due
to the fact the one rpc_clnt (representing the NFSv4 client state)
is shared across mounts.

Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-07-31 12:53:35 -04:00
Jakub Kicinski 84c6b86875 xsk: don't allow umem replace at stack level
Currently drivers have to check if they already have a umem
installed for a given queue and return an error if so.  Make
better use of XDP_QUERY_XSK_UMEM and move this functionality
to the core.

We need to keep rtnl across the calls now.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-31 09:48:21 -07:00
Jakub Kicinski f734607e81 xsk: refactor xdp_umem_assign_dev()
Return early and only take the ref on dev once there is no possibility
of failing.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-31 09:48:21 -07:00
Andrey Ignatov d692f1138a bpf: Support bpf_get_socket_cookie in more prog types
bpf_get_socket_cookie() helper can be used to identify skb that
correspond to the same socket.

Though socket cookie can be useful in many other use-cases where socket is
available in program context. Specifically BPF_PROG_TYPE_CGROUP_SOCK_ADDR
and BPF_PROG_TYPE_SOCK_OPS programs can benefit from it so that one of
them can augment a value in a map prepared earlier by other program for
the same socket.

The patch adds support to call bpf_get_socket_cookie() from
BPF_PROG_TYPE_CGROUP_SOCK_ADDR and BPF_PROG_TYPE_SOCK_OPS.

It doesn't introduce new helpers. Instead it reuses same helper name
bpf_get_socket_cookie() but adds support to this helper to accept
`struct bpf_sock_addr` and `struct bpf_sock_ops`.

Documentation in bpf.h is changed in a way that should not break
automatic generation of markdown.

Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-31 09:33:48 +02:00
Taehee Yoo 1f821611f4 lwt_bpf: remove unnecessary rcu_read_lock in run_lwt_bpf
run_lwt_bpf is called by bpf_{input/output/xmit}.
These functions are already protected by rcu_read_lock.
because lwtunnel_{input/output/xmit} holds rcu_read_lock
and then calls bpf_{input/output/xmit}.
So that rcu_read_lock in the run_lwt_bpf is unnecessary.

Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-31 09:26:34 +02:00
Mathieu Xhonneux 486cdf2158 bpf: add End.DT6 action to bpf_lwt_seg6_action helper
The seg6local LWT provides the End.DT6 action, which allows to
decapsulate an outer IPv6 header containing a Segment Routing Header
(SRH), full specification is available here:

https://tools.ietf.org/html/draft-filsfils-spring-srv6-network-programming-05

This patch adds this action now to the seg6local BPF
interface. Since it is not mandatory that the inner IPv6 header also
contains a SRH, seg6_bpf_srh_state has been extended with a pointer to
a possible SRH of the outermost IPv6 header. This helps assessing if the
validation must be triggered or not, and avoids some calls to
ipv6_find_hdr.

v3: s/1/true, s/0/false for boolean values
v2: - changed true/false -> 1/0
    - preempt_enable no longer called in first conditional block

Signed-off-by: Mathieu Xhonneux <m.xhonneux@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-31 09:22:48 +02:00
Bart Van Assche d34ac5cd3a RDMA, core and ULPs: Declare ib_post_send() and ib_post_recv() arguments const
Since neither ib_post_send() nor ib_post_recv() modify the data structure
their second argument points at, declare that argument const. This change
makes it necessary to declare the 'bad_wr' argument const too and also to
modify all ULPs that call ib_post_send(), ib_post_recv() or
ib_post_srq_recv(). This patch does not change any functionality but makes
it possible for the compiler to verify whether the
ib_post_(send|recv|srq_recv) really do not modify the posted work request.

To make this possible, only one cast had to be introduce that casts away
constness, namely in rpcrdma_post_recvs(). The only way I can think of to
avoid that cast is to introduce an additional loop in that function or to
change the data type of bad_wr from struct ib_recv_wr ** into int
(an index that refers to an element in the work request list). However,
both approaches would require even more extensive changes than this
patch.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-07-30 20:09:34 -06:00
Jakub Kicinski 2d55d614fc net: xsk: don't return frames via the allocator on error
xdp_return_buff() is used when frame has been successfully
handled (transmitted) or if an error occurred during delayed
processing and there is no way to report it back to
xdp_do_redirect().

In case of __xsk_rcv_zc() error is propagated all the way
back to the driver, so there is no need to call
xdp_return_buff().  Driver will recycle the frame anyway
after seeing that error happened.

Fixes: 173d3adb6f ("xsk: add zero-copy support for Rx")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-31 02:03:19 +02:00
Dmitry Safonov 61f4b23769 netlink: Don't shift with UB on nlk->ngroups
On i386 nlk->ngroups might be 32 or 0. Which leads to UB, resulting in
hang during boot.
Check for 0 ngroups and use (unsigned long long) as a type to shift.

Fixes: 7acf9d4237 ("netlink: Do not subscribe to non-existent groups").
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-30 12:42:22 -07:00
Dave Wysochanski 189e195567 sunrpc: Add _add_rpc_iostats() to add rpc_iostats metrics
Add a helper function to add the metrics in two rpc_iostats structures.

Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-07-30 13:19:41 -04:00
Dave Wysochanski acdce5fb8a sunrpc: add _print_rpc_iostats() to output metrics for one RPC op
Refactor the output of the metrics for one RPC op into an internal
function.  No functional change.

Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-07-30 13:19:41 -04:00
Sargun Dhillon 82b98ca566 net/sunrpc: Make rpc_auth_create_args a const
This turns rpc_auth_create_args into a const as it gets passed through the
auth stack.

Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-07-30 13:19:41 -04:00
Sabrina Dubroca df18b50448 net/ipv6: fix metrics leak
Since commit d4ead6b34b ("net/ipv6: move metrics from dst to
rt6_info"), ipv6 metrics are shared and refcounted. rt6_set_from()
assigns the rt->from pointer and increases the refcount on from's
metrics. This reference is never released.

Introduce the fib6_metrics_release() helper and use it to release the
metrics.

Fixes: d4ead6b34b ("net/ipv6: move metrics from dst to rt6_info")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-30 09:45:57 -07:00
YueHaibing 778c4d5c5b fib_rules: NULL check before kfree is not needed
kfree(NULL) is safe,so this removes NULL check before freeing the mem

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-30 09:44:06 -07:00
Vakul Garg ad13acce8d net/tls: Use socket data_ready callback on record availability
On receipt of a complete tls record, use socket's saved data_ready
callback instead of state_change callback. In function tls_queue(),
the TLS record is queued in encrypted state. But the decryption
happen inline when tls_sw_recvmsg() or tls_sw_splice_read() get invoked.
So it should be ok to notify the waiting context about the availability
of data as soon as we could collect a full TLS record. For new data
availability notification, sk_data_ready callback is more appropriate.
It points to sock_def_readable() which wakes up specifically for EPOLLIN
event. This is in contrast to the socket callback sk_state_change which
points to sock_def_wakeup() which issues a wakeup unconditionally
(without event mask).

Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-30 09:41:41 -07:00
Paolo Abeni e5cf1baf92 act_mirred: use TC_ACT_REINSERT when possible
When mirred is invoked from the ingress path, and it wants to redirect
the processed packet, it can now use the TC_ACT_REINSERT action,
filling the tcf_result accordingly, and avoiding a per packet
skb_clone().

Overall this gives a ~10% improvement in forwarding performance for the
TC S/W data path and TC S/W performances are now comparable to the
kernel openvswitch datapath.

v1 -> v2: use ACT_MIRRED instead of ACT_REDIRECT
v2 -> v3: updated after action rename, fixed typo into the commit
	message
v3 -> v4: updated again after action rename, added more comments to
	the code (JiriP), skip the optimization if the control action
	need to touch the tcf_result (Paolo)
v4 -> v5: fix sparse warning (kbuild bot)

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-30 09:31:14 -07:00
Paolo Abeni cd11b16407 net/tc: introduce TC_ACT_REINSERT.
This is similar TC_ACT_REDIRECT, but with a slightly different
semantic:
- on ingress the mirred skbs are passed to the target device
network stack without any additional check not scrubbing.
- the rcu-protected stats provided via the tcf_result struct
  are updated on error conditions.

This new tcfa_action value is not exposed to the user-space
and can be used only internally by clsact.

v1 -> v2: do not touch TC_ACT_REDIRECT code path, introduce
 a new action type instead
v2 -> v3:
 - rename the new action value TC_ACT_REINJECT, update the
   helper accordingly
 - take care of uncloned reinjected packets in XDP generic
   hook
v3 -> v4:
 - renamed again the new action value (JiriP)
v4 -> v5:
 - fix build error with !NET_CLS_ACT (kbuild bot)

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-30 09:31:14 -07:00
Paolo Abeni 7fd4b288ea tc/act: remove unneeded RCU lock in action callback
Each lockless action currently does its own RCU locking in ->act().
This allows using plain RCU accessor, even if the context
is really RCU BH.

This change drops the per action RCU lock, replace the accessors
with the _bh variant, cleans up a bit the surrounding code and
documents the RCU status in the relevant header.
No functional nor performance change is intended.

The goal of this patch is clarifying that the RCU critical section
used by the tc actions extends up to the classifier's caller.

v1 -> v2:
 - preserve rcu lock in act_bpf: it's needed by eBPF helpers,
   as pointed out by Daniel

v3 -> v4:
 - fixed some typos in the commit message (JiriP)

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-30 09:31:13 -07:00
Paolo Abeni 802bfb1915 net/sched: user-space can't set unknown tcfa_action values
Currently, when initializing an action, the user-space can specify
and use arbitrary values for the tcfa_action field. If the value
is unknown by the kernel, is implicitly threaded as TC_ACT_UNSPEC.

This change explicitly checks for unknown values at action creation
time, and explicitly convert them to TC_ACT_UNSPEC. No functional
changes are introduced, but this will allow introducing tcfa_action
values not exposed to user-space in a later patch.

Note: we can't use the above to hide TC_ACT_REDIRECT from user-space,
as the latter is already part of uAPI.

v3 -> v4:
 - use an helper to check for action validity (JiriP)
 - emit an extack for invalid actions (JiriP)
v4 -> v5:
 - keep messages on a single line, drop net_warn (Marcelo)

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-30 09:31:13 -07:00
Christoph Hellwig a331de3bf0 net: remove sock_poll_busy_flag
Fold it into the only caller to make the code simpler and easier to read.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-30 09:10:25 -07:00
Christoph Hellwig f641f13b99 net: remove sock_poll_busy_loop
There is no point in hiding this logic in a helper.  Also remove the
useless events != 0 check and only busy loop once we know we actually
have a poll method.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-30 09:10:25 -07:00
Christoph Hellwig dd979b4df8 net: simplify sock_poll_wait
The wait_address argument is always directly derived from the filp
argument, so remove it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-30 09:10:25 -07:00
Marcel Holtmann b3cadaa485 Bluetooth: hidp: Fix handling of strncpy for hid->name information
This fixes two issues with setting hid->name information.

  CC      net/bluetooth/hidp/core.o
In function ‘hidp_setup_hid’,
    inlined from ‘hidp_session_dev_init’ at net/bluetooth/hidp/core.c:815:9,
    inlined from ‘hidp_session_new’ at net/bluetooth/hidp/core.c:953:8,
    inlined from ‘hidp_connection_add’ at net/bluetooth/hidp/core.c:1366:8:
net/bluetooth/hidp/core.c:778:2: warning: ‘strncpy’ output may be truncated copying 127 bytes from a string of length 127 [-Wstringop-truncation]
  strncpy(hid->name, req->name, sizeof(req->name) - 1);
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  CC      net/bluetooth/hidp/core.o
net/bluetooth/hidp/core.c: In function ‘hidp_setup_hid’:
net/bluetooth/hidp/core.c:778:38: warning: argument to ‘sizeof’ in ‘strncpy’ call is the same expression as the source; did you mean to use the size of the destination? [-Wsizeof-pointer-memaccess]
  strncpy(hid->name, req->name, sizeof(req->name));
                                      ^

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2018-07-30 15:09:54 +03:00
Máté Eckl 4ed8eb6570 netfilter: nf_tables: Add native tproxy support
A great portion of the code is taken from xt_TPROXY.c

There are some changes compared to the iptables implementation:
 - tproxy statement is not terminal here
 - Either address or port has to be specified, but at least one of them
   is necessary. If one of them is not specified, the evaluation will be
   performed with the original attribute of the packet (ie. target port
   is not specified => the packet's dport will be used).

To make this work in inet tables, the tproxy structure has a family
member (typically called priv->family) which is not necessarily equal to
ctx->family.

priv->family can have three values legally:
 - NFPROTO_IPV4 if the table family is ip OR if table family is inet,
   but an ipv4 address is specified as a target address. The rule only
   evaluates ipv4 packets in this case.
 - NFPROTO_IPV6 if the table family is ip6 OR if table family is inet,
   but an ipv6 address is specified as a target address. The rule only
   evaluates ipv6 packets in this case.
 - NFPROTO_UNSPEC if the table family is inet AND if only the port is
   specified. The rule will evaluate both ipv4 and ipv6 packets.

Signed-off-by: Máté Eckl <ecklm94@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-07-30 14:07:12 +02:00
Fernando Fernandez Mancera b96af92d6e netfilter: nf_tables: implement Passive OS fingerprint module in nft_osf
Add basic module functions into nft_osf.[ch] in order to implement OSF
module in nf_tables.

Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-07-30 14:07:11 +02:00
Fernando Fernandez Mancera f932495208 netfilter: nfnetlink_osf: extract nfnetlink_subsystem code from xt_osf.c
Move nfnetlink osf subsystem from xt_osf.c to standalone module so we can
reuse it from the new nft_ost extension.

Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-07-30 14:07:11 +02:00
Fernando Fernandez Mancera f6b7b5f4f3 netfilter: nf_osf: rename nf_osf.c to nfnetlink_osf.c
Rename nf_osf.c to nfnetlink_osf.c as we introduce nfnetlink_osf which is
the OSF infraestructure.

Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-07-30 14:07:10 +02:00
YueHaibing 33b78aaa44 netfilter: use PTR_ERR_OR_ZERO()
Fix ptr_ret.cocci warnings:

  net/netfilter/xt_connlimit.c:96:1-3: WARNING: PTR_ERR_OR_ZERO can be used
  net/netfilter/nft_numgen.c:240:1-3: WARNING: PTR_ERR_OR_ZERO can be used

Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR

Generated by: scripts/coccinelle/api/ptr_ret.cocci

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-07-30 14:07:09 +02:00
Pablo Neira Ayuso 51c23b47e6 netfilter: nf_osf: add nf_osf_find()
This new function returns the OS genre as a string. Plan is to use to
from the new nft_osf extension.

Note that this doesn't yet support ttl options, but it could be easily
extended to do so.

Tested-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-07-30 14:06:59 +02:00
Sean Wang 740011cfe9 Bluetooth: Add new quirk for non-persistent setup settings
Add a new quirk HCI_QUIRK_NON_PERSISTENT_SETUP allowing that a quirk that
runs setup() after every open() and not just after the first open().

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30 14:00:15 +02:00
Jaganath Kanakkassery 85a721a8b0 Bluetooth: Implement secondary advertising on different PHYs
This patch adds support for advertising in primary and secondary
channel on different PHYs. User can add the phy preference in
the flag based on which phy type will be added in extended
advertising parameter would be set.

@ MGMT Command: Add Advertising (0x003e) plen 11
        Instance: 1
        Flags: 0x00000200
          Advertise in CODED on Secondary channel
        Duration: 0
        Timeout: 0
        Advertising data length: 0
        Scan response length: 0
< HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 2
        Extended advertising: Disabled (0x00)
        Number of sets: Disable all sets (0x00)
> HCI Event: Command Complete (0x0e) plen 4
      LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2
        Status: Success (0x00)
< HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25
        Handle: 0x00
        Properties: 0x0000
        Min advertising interval: 1280.000 msec (0x0800)
        Max advertising interval: 1280.000 msec (0x0800)
        Channel map: 37, 38, 39 (0x07)
        Own address type: Random (0x01)
        Peer address type: Public (0x00)
        Peer address: 00:00:00:00:00:00 (OUI 00-00-00)
        Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00)
        TX power: 127 dbm (0x7f)
        Primary PHY: LE Coded (0x03)
        Secondary max skip: 0x00
        Secondary PHY: LE Coded (0x03)
        SID: 0x00
        Scan request notifications: Disabled (0x00)

Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30 13:44:53 +02:00
Jaganath Kanakkassery acf0aeae43 Bluetooth: Handle ADv set terminated event
This event comes after connection complete event for incoming
connections. Since we now have different random address for
each instance, conn resp address is assigned from this event.

As of now only connection part is handled as we are not
enabling duration or max num of events while starting ext adv.

Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30 13:44:53 +02:00
Jaganath Kanakkassery a73c046a28 Bluetooth: Implement Set ADV set random address
This basically sets the random address for the adv instance
Random address can be set only if the instance is created which
is done in Set ext adv param.

Random address and rpa expire timer and flags have been added
to adv instance which will be used when the respective
instance is scheduled.

This introduces a hci_get_random_address() which returns the
own address type and random address (rpa or nrpa) based
on the instance flags and hdev flags. New function is required
since own address type should be known before setting adv params
but address can be set only after setting params.

< HCI Command: LE Set Advertising Set Random Address (0x08|0x0035) plen 7
        Advertising handle: 0x00
        Advertising random address: 3C:8E:56:9B:77:84 (OUI 3C-8E-56)
> HCI Event: Command Complete (0x0e) plen 4
      LE Set Advertising Set Random Address (0x08|0x0035) ncmd 1
        Status: Success (0x00)

Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30 13:44:53 +02:00
Jaganath Kanakkassery 075e40b79f Bluetooth: Use ext adv for directed adv
This patch does extended advertising for directed advertising
if the controller supportes. Instance 0 is used for directed
advertising.

Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30 13:44:53 +02:00
Jaganath Kanakkassery 45b7749f16 Bluetooth: Implement disable and removal of adv instance
If ext adv is enabled then use ext adv to disable as well.
Also remove the adv set during LE disable.

< HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 2
        Extended advertising: Disabled (0x00)
        Number of sets: Disable all sets (0x00)
> HCI Event: Command Complete (0x0e) plen 4
      LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2
        Status: Success (0x00)

Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30 13:44:53 +02:00
Jaganath Kanakkassery a0fb3726ba Bluetooth: Use Set ext adv/scan rsp data if controller supports
This patch implements Set Ext Adv data and Set Ext Scan rsp data
if controller support extended advertising.

Currently the operation is set as Complete data and fragment
preference is set as no fragment

< HCI Command: LE Set Extended Advertising Data (0x08|0x0037) plen 35
        Handle: 0x00
        Operation: Complete extended advertising data (0x03)
        Fragment preference: Minimize fragmentation (0x01)
        Data length: 0x15
        16-bit Service UUIDs (complete): 2 entries
          Heart Rate (0x180d)
          Battery Service (0x180f)
        Name (complete): Test LE
        Company: Google (224)
          Data: 0102
> HCI Event: Command Complete (0x0e) plen 4
      LE Set Extended Advertising Data (0x08|0x0037) ncmd 1
        Status: Success (0x00)

Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30 13:44:52 +02:00
Jaganath Kanakkassery de181e887a Bluetooth: Impmlement extended adv enable
This patch basically replaces legacy adv with extended adv
based on the controller support. Currently there is no
design change. ie only one adv set will be enabled at a time.

This also adds tx_power in instance and store whatever returns
from Set_ext_parameter, use the same in adv data as well.
For instance 0 tx_power is stored in hdev only.

< HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25
        Handle: 0x00
        Properties: 0x0010
          Use legacy advertising PDUs: ADV_NONCONN_IND
        Min advertising interval: 1280.000 msec (0x0800)
        Max advertising interval: 1280.000 msec (0x0800)
        Channel map: 37, 38, 39 (0x07)
        Own address type: Random (0x01)
        Peer address type: Public (0x00)
        Peer address: 00:00:00:00:00:00 (OUI 00-00-00)
        Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00)
        TX power: 127 dbm (0x7f)
        Primary PHY: LE 1M (0x01)
        Secondary max skip: 0x00
        Secondary PHY: LE 1M (0x01)
        SID: 0x00
        Scan request notifications: Disabled (0x00)
> HCI Event: Command Complete (0x0e) plen 5
      LE Set Extended Advertising Parameters (0x08|0x0036) ncmd 1
        Status: Success (0x00)
        TX power (selected): 7 dbm (0x07)
< HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6
        Extended advertising: Enabled (0x01)
        Number of sets: 1 (0x01)
        Entry 0
          Handle: 0x00
          Duration: 0 ms (0x00)
          Max ext adv events: 0
> HCI Event: Command Complete (0x0e) plen 4
      LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2
        Status: Success (0x00)

Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30 13:44:52 +02:00
Jaganath Kanakkassery 6b49bcb4bc Bluetooth: Read no of adv sets during init
This patch reads the number of advertising sets in the controller
during init and save it in hdev.

Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30 13:44:52 +02:00