The issues caused by:
commit 64e62bdf04 ("drm/dp_mst: Remove VCPI while disabling topology
mgr")
Prompted me to take a closer look at how we clear the payload state in
general when disabling the topology, and it turns out there's actually
two subtle issues here.
The first is that we're not grabbing &mgr.payload_lock when clearing the
payloads in drm_dp_mst_topology_mgr_set_mst(). Seeing as the canonical
lock order is &mgr.payload_lock -> &mgr.lock (because we always want
&mgr.lock to be the inner-most lock so topology validation always
works), this makes perfect sense. It also means that -technically- there
could be racing between someone calling
drm_dp_mst_topology_mgr_set_mst() to disable the topology, along with a
modeset occurring that's modifying the payload state at the same time.
The second is the more obvious issue that Wayne Lin discovered, that
we're not clearing proposed_payloads when disabling the topology.
I actually can't see any obvious places where the racing caused by the
first issue would break something, and it could be that some of our
higher-level locks already prevent this by happenstance, but better safe
then sorry. So, let's make it so that drm_dp_mst_topology_mgr_set_mst()
first grabs &mgr.payload_lock followed by &mgr.lock so that we never
race when modifying the payload state. Then, we also clear
proposed_payloads to fix the original issue of enabling a new topology
with a dirty payload state. This doesn't clear any of the drm_dp_vcpi
structures, but those are getting destroyed along with the ports anyway.
Changes since v1:
* Use sizeof(mgr->payloads[0])/sizeof(mgr->proposed_vcpis[0]) instead -
vsyrjala
Cc: Sean Paul <sean@poorly.run>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200122194321.14953-1-lyude@redhat.com
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/drm_dp_mst_topology.c:3693:16: warning: variable
‘origlen’ set but not used [-Wunused-but-set-variable]
int replylen, origlen, curreply;
It looks like never use variable origlen after assign value to it.
Fixes: ad7f8a1f9c ("drm/helper: add Displayport multi-stream helper (v0.6)")
Signed-off-by: Bo YU <tsu.yubo@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200118080628.mxcx7bfwdas5m7un@kaowomen.cn
UAPI Changes:
- Add support for DMA-BUF HEAPS.
Cross-subsystem Changes:
- mipi dsi definition updates, pulled into drm-intel as well.
- Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim.
- Remove support for dma-buf kmap/kunmap.
- Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well.
Core Changes:
- Small cleanups to ttm.
- Fix SCDC definition.
- Assorted cleanups to core.
- Add todo to remove load/unload hooks, and use generic fbdev emulation.
- Assorted documentation updates.
- Use blocking ww lock in ttm fault handler.
- Remove drm_fb_helper_fbdev_setup/teardown.
- Warning fixes with W=1 for atomic.
- Use drm_debug_enabled() instead of drm_debug flag testing in various drivers.
- Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted)
- Various kconfig indentation fixes in core and drivers.
- Fix freeing transactions in dp-mst correctly.
- Sean Paul is steping down as core maintainer. :-(
- Add lockdep annotations for atomic locks vs dma-resv.
- Prevent use-after-free for a bad job in drm_scheduler.
- Fill out all block sizes in the P01x and P210 definitions.
- Avoid division by zero in drm/rect, and fix bounds.
- Add drm/rect selftests.
- Add aspect ratio and alternate clocks for HDMI 4k modes.
- Add todo for drm_framebuffer_funcs and fb_create cleanup.
- Drop DRM_AUTH for prime import/export ioctls.
- Clear DP-MST payload id tables downstream when initializating.
- Fix for DSC throughput definition.
- Add extra FEC definitions.
- Fix fake offset in drm_gem_object_funs.mmap.
- Stop using encoder->bridge in core directly
- Handle bridge chaining slightly better.
- Add backlight support to drm/panel, and use it in many panel drivers.
- Increase max number of y420 modes from 128 to 256, as preparation to add the new modes.
Driver Changes:
- Small fixes all over.
- Fix documentation in vkms.
- Fix mmap_sem vs dma_resv in nouveau.
- Small cleanup in komeda.
- Add page flip support in gma500 for psb/cdv.
- Add ddc symlink in the connector sysfs directory for many drivers.
- Add support for analogic an6345, and fix small bugs in it.
- Add atomic modesetting support to ast.
- Fix radeon fault handler VMA race.
- Switch udl to use generic shmem helpers.
- Unconditional vblank handling for mcde.
- Miscellaneous fixes to mcde.
- Tweak debug output from komeda using debugfs.
- Add gamma and color transform support to komeda for DOU-IPS.
- Add support for sony acx424AKP panel.
- Various small cleanups to gma500.
- Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation.
- Add support for Logic PD Type 28 panel.
- Use drm_panel_* wrapper functions in exynos/tegra/msm.
- Add devicetree bindings for generic DSI panels.
- Don't include drm_pci.h directly in many drivers.
- Add support for begin/end_cpu_access in udmabuf.
- Stop using drm_get_pci_dev in gma500 and mga200.
- Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access.
- Add devfreq thermal support to panfrost.
- Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager.
- meson: Add support for OSD1 plane AFBC commit.
- Stop displaying garbage when toggling ast primary plane on/off.
- More cleanups and fixes to UDL.
- Add D32 suport to komeda.
- Remove globle copy of drm_dev in gma500.
- Add support for Boe Himax8279d MIPI-DSI LCD panel.
- Add support for ingenic JZ4770 panel.
- Small null pointer deference fix in ingenic.
- Remove support for the special tfp420 driver, as there is a generic way to do it.
-----BEGIN PGP SIGNATURE-----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=b15X
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2019-12-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.6:
UAPI Changes:
- Add support for DMA-BUF HEAPS.
Cross-subsystem Changes:
- mipi dsi definition updates, pulled into drm-intel as well.
- Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim.
- Remove support for dma-buf kmap/kunmap.
- Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well.
Core Changes:
- Small cleanups to ttm.
- Fix SCDC definition.
- Assorted cleanups to core.
- Add todo to remove load/unload hooks, and use generic fbdev emulation.
- Assorted documentation updates.
- Use blocking ww lock in ttm fault handler.
- Remove drm_fb_helper_fbdev_setup/teardown.
- Warning fixes with W=1 for atomic.
- Use drm_debug_enabled() instead of drm_debug flag testing in various drivers.
- Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted)
- Various kconfig indentation fixes in core and drivers.
- Fix freeing transactions in dp-mst correctly.
- Sean Paul is steping down as core maintainer. :-(
- Add lockdep annotations for atomic locks vs dma-resv.
- Prevent use-after-free for a bad job in drm_scheduler.
- Fill out all block sizes in the P01x and P210 definitions.
- Avoid division by zero in drm/rect, and fix bounds.
- Add drm/rect selftests.
- Add aspect ratio and alternate clocks for HDMI 4k modes.
- Add todo for drm_framebuffer_funcs and fb_create cleanup.
- Drop DRM_AUTH for prime import/export ioctls.
- Clear DP-MST payload id tables downstream when initializating.
- Fix for DSC throughput definition.
- Add extra FEC definitions.
- Fix fake offset in drm_gem_object_funs.mmap.
- Stop using encoder->bridge in core directly
- Handle bridge chaining slightly better.
- Add backlight support to drm/panel, and use it in many panel drivers.
- Increase max number of y420 modes from 128 to 256, as preparation to add the new modes.
Driver Changes:
- Small fixes all over.
- Fix documentation in vkms.
- Fix mmap_sem vs dma_resv in nouveau.
- Small cleanup in komeda.
- Add page flip support in gma500 for psb/cdv.
- Add ddc symlink in the connector sysfs directory for many drivers.
- Add support for analogic an6345, and fix small bugs in it.
- Add atomic modesetting support to ast.
- Fix radeon fault handler VMA race.
- Switch udl to use generic shmem helpers.
- Unconditional vblank handling for mcde.
- Miscellaneous fixes to mcde.
- Tweak debug output from komeda using debugfs.
- Add gamma and color transform support to komeda for DOU-IPS.
- Add support for sony acx424AKP panel.
- Various small cleanups to gma500.
- Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation.
- Add support for Logic PD Type 28 panel.
- Use drm_panel_* wrapper functions in exynos/tegra/msm.
- Add devicetree bindings for generic DSI panels.
- Don't include drm_pci.h directly in many drivers.
- Add support for begin/end_cpu_access in udmabuf.
- Stop using drm_get_pci_dev in gma500 and mga200.
- Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access.
- Add devfreq thermal support to panfrost.
- Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager.
- meson: Add support for OSD1 plane AFBC commit.
- Stop displaying garbage when toggling ast primary plane on/off.
- More cleanups and fixes to UDL.
- Add D32 suport to komeda.
- Remove globle copy of drm_dev in gma500.
- Add support for Boe Himax8279d MIPI-DSI LCD panel.
- Add support for ingenic JZ4770 panel.
- Small null pointer deference fix in ingenic.
- Remove support for the special tfp420 driver, as there is a generic way to do it.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ba73535a-9334-5302-2e1f-5208bd7390bd@linux.intel.com
[Why]
This patch is trying to address the issue observed when hotplug DP
daisy chain monitors.
e.g.
src-mstb-mstb-sst -> src (unplug) mstb-mstb-sst -> src-mstb-mstb-sst
(plug in again)
Once unplug a DP MST capable device, driver will call
drm_dp_mst_topology_mgr_set_mst() to disable MST. In this function,
it cleans data of topology manager while disabling mst_state. However,
it doesn't clean up the proposed_vcpis of topology manager.
If proposed_vcpi is not reset, once plug in MST daisy chain monitors
later, code will fail at checking port validation while trying to
allocate payloads.
When MST capable device is plugged in again and try to allocate
payloads by calling drm_dp_update_payload_part1(), this
function will iterate over all proposed virtual channels to see if
any proposed VCPI's num_slots is greater than 0. If any proposed
VCPI's num_slots is greater than 0 and the port which the
specific virtual channel directed to is not in the topology, code then
fails at the port validation. Since there are stale VCPI allocations
from the previous topology enablement in proposed_vcpi[], code will fail
at port validation and reurn EINVAL.
[How]
Clean up the data of stale proposed_vcpi[] and reset mgr->proposed_vcpis
to NULL while disabling mst in drm_dp_mst_topology_mgr_set_mst().
Changes since v1:
*Add on more details in commit message to describe the issue which the
patch is trying to fix
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
[added cc to stable]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191205090043.7580-1-Wayne.Lin@amd.com
Cc: <stable@vger.kernel.org> # v3.17+
It seems that on certain MST hubs, namely the CableMatters USB-C 2x DP
hub, using the DP_PAYLOAD_ALLOCATE_SET and DP_PAYLOAD_TABLE_UPDATE_STATUS
register ranges to clear any pre-existing payload allocations on the hub isn't
always enough to reset things if the source device has been reset unexpectedly.
Or at least, that's the current running theory. The precise behavior appears to
be that when the source device gets reset unexpectedly, the hub begins reporting
an available_pbn value of 0 for all of its ports. This is a bit inconsistent
with the our theory, since this seems to happen even if previously set PBN
allocations should have resulted in a non-zero available_pbn value. So, it's
possible that something else may be going on here.
Strangely though, sending a CLEAR_PAYLOAD_ID_TABLE broadcast request when
initializing the MST topology seems to bring things into working order and make
available_pbn work again. Since this is a pretty safe solution, let's go ahead
and implement it.
Changes since v1:
* Change indenting on drm_dp_send_clear_payload_id_table() prototype
* Remove some braces in drm_dp_send_clear_payload_id_table()
* Reorganize some variable declarations in drm_dp_send_clear_payload_id_table()
* Don't forget to handle DP_CLEAR_PAYLOAD_ID_TABLE in
drm_dp_sideband_parse_reply()
* Move drm_dp_send_clear_payload_id_table() call into
drm_dp_mst_link_probe_work(), since we can't send sideband messages
while under lock in drm_dp_mst_topology_mgr_set_mst()
* Change commit message
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190829000944.20722-1-lyude@redhat.com
[Why]
If the payload_state is DP_PAYLOAD_DELETE_LOCAL in series, current
code doesn't delete the payload at current index and just move the
index to next one after shuffling payloads.
[How]
Drop the i++ increasing part in for loop head and decide whether
to increase the index or not according to payload_state of current
payload.
Changes since v1:
* Refine the code to have it easy reading
* Amend the commit message to meet the way code is modified now.
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Fixes: 706246c761 ("drm/dp_mst: Refactor drm_dp_update_payload_part1()")
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Juston Li <juston.li@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.1+
[Added cc for stable]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203042423.5961-1-Wayne.Lin@amd.com
Currently tx->bytes is being freed r->num_transactions number of
times because tx is not being set correctly. Fix this by setting
tx to &r->transactions[i] so that the correct objects are being
freed on each loop iteration.
Addresses-Coverity: ("Double free")
Fixes: 2f015ec6ea ("drm/dp_mst: Add sideband down request tracing + selftests")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191120173509.347490-1-colin.king@canonical.com
Change rem_nsec to u32 since that's what do_div returns, this avoids the
u64 divide in the drm_print args.
Changes in v2:
- Instead of doing do_div in drm_print, make rem_nsec u32 (Ville)
Link to v1: https://patchwork.freedesktop.org/patch/msgid/20191106173622.15573-1-sean@poorly.run
Fixes: 12a280c728 ("drm/dp_mst: Add topology ref history tracking for debugging")
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <sean@poorly.run>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106194121.164458-1-sean@poorly.run
drivers/gpu/drm/drm_dp_mst_topology.c: In function __topology_ref_save:
drivers/gpu/drm/drm_dp_mst_topology.c:1424:6: error: implicit declaration of function stack_trace_save; did you mean stack_depot_save? [-Werror=implicit-function-declaration]
n = stack_trace_save(stack_entries, ARRAY_SIZE(stack_entries), 1);
^~~~~~~~~~~~~~~~
stack_depot_save
drivers/gpu/drm/drm_dp_mst_topology.c: In function __dump_topology_ref_history:
drivers/gpu/drm/drm_dp_mst_topology.c:1513:3: error: implicit declaration of function stack_trace_snprint; did you mean acpi_trace_point? [-Werror=implicit-function-declaration]
stack_trace_snprint(buf, PAGE_SIZE, entries, nr_entries, 4);
^~~~~~~~~~~~~~~~~~~
acpi_trace_point
stack_trace_save and stack_trace_snprint are declared in <linux/stacktrace.h>,
so there is need to include it, and <linux/stackdepot.h> is already included
by practices, so just replace <linux/stackdepot.h> by <linux/stacktrace.h>.
Signed-off-by: Chenwandun <chenwandun@huawei.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1572515029-42087-1-git-send-email-chenwandun@huawei.com
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
* Handle UP requests asynchronously in the DP MST helpers, fixing
hotplug notifications and allowing us to implement suspend/resume
reprobing
* Add basic suspend/resume reprobing to the DP MST helpers
* Improve locking for link address reprobing and connection status
request handling in the DP MST helpers
* Miscellaneous refactoring in the DP MST helpers
* Add a Kconfig option to the DP MST helpers to enable tracking of
gets/puts for topology references for debugging purposes
Driver Changes:
* nouveau: Resume hotplug interrupts earlier, so that sideband
messages may be transmitted during resume and thus allow
suspend/resume reprobing for DP MST to work
* nouveau: Avoid grabbing runtime PM references when handling short DP
pulses, so that handling sideband messages in resume codepaths with the
DP MST helpers doesn't deadlock us
* i915, nouveau, amdgpu, radeon: Use detect_ctx for probing MST
connectors, so that we can grab the topology manager's atomic lock
Note: there's some amdgpu patches that I didn't realize were pushed
upstream already when creating this topic branch. When they fail to
apply, you can just ignore and skip them.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a74c6446bc960190d195a751cb6d8a00a98f3974.camel@redhat.com
For very subtle mistakes with topology refs, it can be rather difficult
to trace them down with the debugging info that we already have. I had
one such issue recently while trying to implement suspend/resume
reprobing for MST, and ended up coming up with this.
Inspired by Chris Wilson's wakeref tracking for i915, this adds a very
similar feature to the DP MST helpers, which allows for partial tracking
of topology refs for both ports and branch devices. This is a lot less
advanced then wakeref tracking: we merely keep a count of all of the
spots where a topology ref has been grabbed or dropped, then dump out
that history in chronological order when a port or branch device's
topology refcount reaches 0. So far, I've found this incredibly useful
for debugging topology refcount errors.
Since this has the potential to be somewhat slow and loud, we add an
expert kernel config option to enable or disable this feature,
CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS.
Changes since v1:
* Don't forget to destroy topology_ref_history_lock
Changes since v4:
* Correct order of kref_put()/topology_ref_history_unlock - we can't
unlock the history after kref_put() since the memory might have been
freed by that point
* Don't print message on allocation error failures, the kernel already
does this for us
Changes since v5:
* Get rid of some leftover usages of %px
* Remove a leftover empty return; statement
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022023641.8026-15-lyude@redhat.com
Finally! For a very long time, our MST helpers have had one very
annoying issue: They don't know how to reprobe the topology state when
coming out of suspend. This means that if a user has a machine connected
to an MST topology and decides to suspend their machine, we lose all
topology changes that happened during that period. That can be a big
problem if the machine was connected to a different topology on the same
port before resuming, as we won't bother reprobing any of the ports and
likely cause the user's monitors not to come back up as expected.
So, we start fixing this by teaching our MST helpers how to reprobe the
link addresses of each connected topology when resuming. As it turns
out, the behavior that we want here is identical to the behavior we want
when initially probing a newly connected MST topology, with a couple of
important differences:
- We need to be more careful about handling the potential races between
events from the MST hub that could change the topology state as we're
performing the link address reprobe
- We need to be more careful about handling unlikely state changes on
ports - such as an input port turning into an output port, something
that would be far more likely to happen in situations like the MST hub
we're connected to being changed while we're suspend
Both of which have been solved by previous commits. That leaves one
requirement:
- We need to prune any MST ports in our in-memory topology state that
were present when suspending, but have not appeared in the post-resume
link address response from their parent branch device
Which we can now handle in this commit by modifying
drm_dp_send_link_address(). We then introduce suspend/resume reprobing
by introducing drm_dp_mst_topology_mgr_invalidate_mstb(), which we call
in drm_dp_mst_topology_mgr_suspend() to traverse the in-memory topology
state to indicate that each mstb needs it's link address resent and PBN
resources reprobed.
On resume, we start back up &mgr->work and have it reprobe the topology
in the same way we would on a hotplug, removing any leftover ports that
no longer appear in the topology state.
Changes since v4:
* Split indenting changes in drm_dp_mst_topology_mgr_resume() into a
separate patch
* Only fire hotplugs when something has actually changed after a link
address probe
* Don't try to change port->connector at all on ports, just throw out
ports that need their connectors removed to make things easier.
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022023641.8026-14-lyude@redhat.com
Does what it says on the tin.
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022023641.8026-9-lyude@redhat.com
This probably hasn't caused any problems up until now since it's
probably nearly impossible to encounter this in the wild, however if we
were to receive a connection status notification from the MST hub after
resume while we're in the middle of reprobing the link addresses for a
topology then there's a much larger chance that a port could have
changed from being an output port to input port (or vice versa). If we
forget to update this bit of information, we'll potentially ignore a
valid PDT change on a downstream port because we think it's an input
port.
So, make sure we read the input_port field in connection status
notifications in drm_dp_mst_handle_conn_stat() to prevent this from
happening once we've implemented suspend/resume reprobing.
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022023641.8026-8-lyude@redhat.com
This is a complicated one. Essentially, there's currently a problem in the MST
core that hasn't really caused any issues that we're aware of (emphasis on "that
we're aware of"): locking.
When we go through and probe the link addresses and path resources in a
topology, we hold no locks when updating ports with said information. The
members I'm referring to in particular are:
- ldps
- ddps
- mcs
- pdt
- dpcd_rev
- num_sdp_streams
- num_sdp_stream_sinks
- available_pbn
- input
- connector
Now that we're handling UP requests asynchronously and will be using some of
the struct members mentioned above in atomic modesetting in the future for
features such as PBN validation, this is going to become a lot more important.
As well, the next few commits that prepare us for and introduce suspend/resume
reprobing will also need clear locking in order to prevent from additional
racing hilarities that we never could have hit in the past.
So, let's solve this issue by using &mgr->base.lock, the modesetting
lock which currently only protects &mgr->base.state. This works
perfectly because it allows us to avoid blocking connection_mutex
unnecessarily, and we can grab this in connector detection paths since
it's a ww mutex. We start by having drm_dp_mst_handle_up_req() hold this
when updating ports. For drm_dp_mst_handle_link_address_port() things
are a bit more complicated. As I've learned the hard way, we can grab
&mgr->lock.base for everything except for port->connector. See, our
normal driver probing paths end up generating this rather obvious
lockdep chain:
&drm->mode_config.mutex
-> crtc_ww_class_mutex/crtc_ww_class_acquire
-> &connector->mutex
However, sysfs grabs &drm->mode_config.mutex in order to protect itself
from connector state changing under it. Because this entails grabbing
kn->count, e.g. the lock that the kernel provides for protecting sysfs
contexts, we end up grabbing kn->count followed by
&drm->mode_config.mutex. This ends up creating an extremely rude chain:
&kn->count
-> &drm->mode_config.mutex
-> crtc_ww_class_mutex/crtc_ww_class_acquire
-> &connector->mutex
I mean, look at that thing! It's just evil!!! This gross thing ends up
making any calls to drm_connector_register()/drm_connector_unregister()
impossible when holding any kind of modesetting lock. This is annoying
because ideally, we always want to ensure that
drm_dp_mst_port->connector never changes when doing an atomic commit or
check that would affect the atomic topology state so that it can
reliably and easily be used from future DRM DP MST helpers to assist
with tasks such as scanning through the current VCPI allocations and
adding connectors which need to have their allocations updated in
response to a bandwidth change or the like.
Being able to hold &mgr->base.lock throughout the entire link probe
process would have been _great_, since we could prevent userspace from
ever seeing any states in-between individual port changes and as a
result likely end up with a much faster probe and more consistent
results from said probes. But without some rework of how we handle
connector probing in sysfs it's not at all currently possible. In the
future, maybe we can try using the sysfs locks to protect updates to
connector probing state and fix this mess.
So for now, to protect everything other than port->connector under
&mgr->base.lock and ensure that we still have the guarantee that atomic
check/commit contexts will never see port->connector change we use a
silly trick. See: port->connector only needs to change in order to
ensure that input ports (see the MST spec) never have a ghost connector
associated with them. But, there's nothing stopping us from simply
throwing the entire port out and creating a new one in order to maintain
that requirement while still keeping port->connector consistent across
the lifetime of the port in atomic check/commit contexts. For all
intended purposes this works fine, as we validate ports in any contexts
we care about before using them and as such will end up reporting the
connector as disconnected until it's port's destruction finalizes. So,
we just do that in cases where we detect port->input has transitioned
from true->false. We don't need to worry about the other direction,
since a port without a connector isn't visible to userspace and as such
doesn't need to be protected by &mgr->base.lock until we finish
registering a connector for it.
For updating members of drm_dp_mst_port other than port->connector, we
simply grab &mgr->base.lock in drm_dp_mst_link_probe_work() for already
registered ports, update said members and drop the lock before
potentially registering a connector and probing the link address of it's
children.
Finally, we modify drm_dp_mst_detect_port() to take a modesetting lock
acquisition context in order to acquire &mgr->base.lock under
&connection_mutex and convert all it's users over to using the
.detect_ctx probe hooks.
With that, we finally have well defined locking.
Changes since v4:
* Get rid of port->mutex, stop using connection_mutex and just use our own
modesetting lock - mgr->base.lock. Also, add a probe_lock that comes
before this patch.
* Just throw out ports that get changed from an output to an input, and
replace them with new ports. This lets us ensure that modesetting
contexts never see port->connector go from having a connector to being
NULL.
* Write an extremely detailed explanation of what problems this is
trying to fix, since there's a _lot_ of context here and I honestly
forgot some of it myself a couple times.
* Don't grab mgr->lock when reading port->mstb in
drm_dp_mst_handle_link_address_port(). It's not needed.
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022023641.8026-7-lyude@redhat.com
Currently, MST lacks locking in a lot of places that really should have
some sort of locking. Hotplugging and link address code paths are some
of the offenders here, as there is actually nothing preventing us from
running a link address probe while at the same time handling a
connection status update request - something that's likely always been
possible but never seen in the wild because hotplugging has been broken
for ages now (with the exception of amdgpu, for reasons I don't think
are worth digging into very far).
Note: I'm going to start using the term "in-memory topology layout" here
to refer to drm_dp_mst_port->mstb and drm_dp_mst_branch->ports.
Locking in these places is a little tougher then it looks though.
Generally we protect anything having to do with the in-memory topology
layout under &mgr->lock. But this becomes nearly impossible to do from
the context of link address probes due to the fact that &mgr->lock is
usually grabbed under random various modesetting locks, meaning that
there's no way we can just invert the &mgr->lock order and keep it
locked throughout the whole process of updating the topology.
Luckily there are only two workers which can modify the in-memory
topology layout: drm_dp_mst_up_req_work() and
drm_dp_mst_link_probe_work(), meaning as long as we prevent these two
workers from traveling the topology layout in parallel with the intent
of updating it we don't need to worry about grabbing &mgr->lock in these
workers for reads. We only need to grab &mgr->lock in these workers for
writes, so that readers outside these two workers are still protected
from the topology layout changing beneath them.
So, add the new &mgr->probe_lock and use it in both
drm_dp_mst_link_probe_work() and drm_dp_mst_up_req_work(). Additionally,
add some more detailed explanations for how this locking is intended to
work to drm_dp_mst_port->mstb and drm_dp_mst_branch->ports.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022023641.8026-6-lyude@redhat.com
Once upon a time, hotplugging devices on MST branches actually worked in
DRM. Now, it only works in amdgpu (likely because of how it's hotplug
handlers are implemented). On both i915 and nouveau, hotplug
notifications from MST branches are noticed - but trying to respond to
them causes messaging timeouts and causes the whole topology state to go
out of sync with reality, usually resulting in the user needing to
replug the entire topology in hopes that it actually fixes things.
The reason for this is because the way we currently handle UP requests
in MST is completely bogus. drm_dp_mst_handle_up_req() is called from
drm_dp_mst_hpd_irq(), which is usually called from the driver's hotplug
handler. Because we handle sending the hotplug event from this function,
we actually cause the driver's hotplug handler (and in turn, all
sideband transactions) to block on
drm_device->mode_config.connection_mutex. This makes it impossible to
send any sideband messages from the driver's connector probing
functions, resulting in the aforementioned sideband message timeout.
There's even more problems with this beyond breaking hotplugging on MST
branch devices. It also makes it almost impossible to protect
drm_dp_mst_port struct members under a lock because we then have to
worry about dealing with all of the lock dependency issues that ensue.
So, let's finally actually fix this issue by handling the processing of
up requests asyncronously. This way we can send sideband messages from
most contexts without having to deal with getting blocked if we hold
connection_mutex. This also fixes MST branch device hotplugging on i915,
finally!
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022023641.8026-5-lyude@redhat.com
Since we're going to be implementing suspend/resume reprobing very soon,
we need to make sure we are extra careful to ensure that our locking
actually protects the topology state where we expect it to. Turns out
this isn't the case with drm_dp_port_setup_pdt() and
drm_dp_port_teardown_pdt(), both of which change port->mstb without
grabbing &mgr->lock.
Additionally, since most callers of these functions are just using it to
teardown the port's previous PDT and setup a new one we can simplify
things a bit and combine drm_dp_port_setup_pdt() and
drm_dp_port_teardown_pdt() into a single function:
drm_dp_port_set_pdt(). This function also handles actually ensuring that
we grab the correct locks when we need to modify port->mstb.
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022023641.8026-4-lyude@redhat.com
This will allow us to add some locking for port->* members, in
particular the PDT and ->connector, which can't be done from
drm_dp_destroy_port() since we don't know what locks the caller might be
holding.
Note that we already do this in delayed_destroy_work (renamed from
destroy_connector_work in this patch) for ports, we're just making it so
mstbs are also destroyed in this worker.
Changes since v2:
* Clarify commit message
Changes since v4:
* Clarify commit message more
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022023641.8026-3-lyude@redhat.com
When reprobing an MST topology during resume, we have to account for the
fact that while we were suspended it's possible that mstbs may have been
removed from any ports in the topology. Since iterating downwards in the
topology requires that we hold &mgr->lock, destroying MSTBs from this
context would result in attempting to lock &mgr->lock a second time and
deadlocking.
So, fix this by first moving destruction of MSTBs into
destroy_connector_work, then rename destroy_connector_work and friends
to reflect that they now destroy both ports and mstbs.
Note that even though this means that MSTBs will still be accessible for
a short period of time between their removal from the topology and
delayed destruction, we are still protected against referencing a MSTB
with a refcount of 0 since we use kref_get_unless_zero() in most places.
Changes since v1:
* s/destroy_connector_list/destroy_port_list/
s/connector_destroy_lock/delayed_destroy_lock/
s/connector_destroy_work/delayed_destroy_work/
s/drm_dp_finish_destroy_branch_device/drm_dp_delayed_destroy_mstb/
s/drm_dp_finish_destroy_port/drm_dp_delayed_destroy_port/
- danvet
* Use two loops in drm_dp_delayed_destroy_work() - danvet
* Better explain why we need to do this - danvet
* Use cancel_work_sync() instead of flush_work() - flush_work() doesn't
account for work requeing
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022023641.8026-2-lyude@redhat.com
Remove unnecessary variable `ret` in drm_dp_atomic_find_vcpi_slots()
only used to hold the function return value and have the function
return the value directly.
Issue found by coccinelle:
@@
local idexpression ret;
expression e;
@@
-ret =
+return
e;
-return ret;
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191019071840.16877-1-wambui@karuga.xyz
Private atomic objects have grown their own locking with
commit b962a12050
Author: Rob Clark <robdclark@gmail.com>
Date: Mon Oct 22 14:31:22 2018 +0200
drm/atomic: integrate modeset lock with private objects
which means we're no longer relying on connection_mutex for mst state
locking needs.
Cc: Lyude Paul <lyude@redhat.com>
Cc: Sean Paul <sean@poorly.run>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191009224113.5432-1-daniel.vetter@ffwll.ch
Add helper to check if a drm debug category is enabled. Convert drm core
to use it. No functional changes.
v2: Move unlikely() to drm_debug_enabled() (Eric)
v3: Keep unlikely() when combined with other conditions (Eric)
Cc: Eric Engestrom <eric@engestrom.ch>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191001140614.26909-1-jani.nikula@intel.com
Get rid of the drm_fixp_from_fraction() usage and just do the
straightforward calculation directly.
Cc: Lyude Paul <lyude@redhat.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190925141442.23236-3-ville.syrjala@linux.intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
Make drm_dp_get_vc_payload() tolerate arbitrary DP_LINK_BW_*
values, just like drm_dp_bw_code_to_link_rate() does since commit
57a1b08937 ("drm: Make the bw/link rate calculations more forgiving").
Cc: Lyude Paul <lyude@redhat.com>
Cc: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190925141442.23236-2-ville.syrjala@linux.intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
It looks like one of the topology manager mutexes may have been renamed
during a rebase, but the destruction function wasn't updated with the
new name:
error: ‘struct drm_dp_mst_topology_mgr’ has no member named
‘delayed_destroy_lock’
Fixes: 50094b5dcd ("drm/dp_mst: Destroy topology_mgr mutexes")
Cc: Lyude Paul <lyude@redhat.com>
Cc: Sean Paul <sean@poorly.run>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190925224617.24027-1-matthew.d.roper@intel.com
The names for these functions are rather confusing. drm_dp_add_port()
sounds like a function that would simply create a port and add it to a
topology, and do nothing more. Similarly, drm_dp_update_port() would be
assumed to be the function that should be used to update port
information after initial creation.
While those assumptions are currently correct in how these functions are
used, a quick glance at drm_dp_add_port() reveals that drm_dp_add_port()
can also update the information on a port, and seems explicitly designed
to do so. This can be explained pretty simply by the fact that there's
more situations that would involve updating the port information based
on a link address response as opposed to a connection status
notification than the driver's initial topology probe. Case in point:
reprobing link addresses after suspend/resume.
Since we're about to start using drm_dp_add_port() differently for
suspend/resume reprobing, let's rename both functions to clarify what
they actually do.
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-18-lyude@redhat.com
Turns out we've been forgetting for a while now to actually destroy any
of the mutexes that we create in drm_dp_mst_topology_mgr. So, let's do
that.
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-15-lyude@redhat.com
Declare local pointer to the drm_dp_link_address_ack_reply struct
instead of constantly dereferencing it through the union in
txmsg->reply. Then, invert the order of conditionals so we don't have to
do the bulk of the work inside them, and can wrap lines even less. Then
finally, rearrange variable declarations a bit.
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-16-lyude@redhat.com
* Remove the big ugly have_eomt conditional
* Store &mgr->down_rep_recv.initial_hdr in a var to make line wrapping
easier
* Remove duplicate memset() calls
* Actually wrap lines
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-14-lyude@redhat.com
There's a couple of changes here, so to summarize:
* Remove the big ugly mgr->up_req_recv.have_eomt conditional to save on
indenting
* Store &mgr->up_req_recv.initial_hdr in a variable so we don't keep
going over 80 character long lines
* De-duplicate code for calling drm_dp_send_up_ack_reply() and getting
the MSTB via it's GUID
* Remove all of the duplicate calls to memset() and just use a goto
instead
* Actually do line wrapping
* Remove the unnecessary if (mstb) check before calling
drm_dp_mst_topology_put_mstb() - we are guaranteed to always have
mstb != NULL at that point in the function
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-13-lyude@redhat.com
And it's helper, we'll be using this in just a moment.
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-12-lyude@redhat.com
Which reduces indentation and makes this function more legible.
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-11-lyude@redhat.com
Use more pointers so we don't have to write out
txmsg->reply.u.path_resources each time. Also, fix line wrapping +
rearrange local variables.
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-10-lyude@redhat.com
Unfortunately the DP MST helpers do not have much in the way of
debugging utilities. So, let's add some!
This adds basic debugging output for down sideband requests that we send
from the driver, so that we can actually discern what's happening when
sideband requests timeout.
Since there wasn't really a good way of testing that any of this worked,
I ended up writing simple selftests that lightly test sideband message
encoding and decoding as well. Enjoy!
Changes since v1:
* Clean up DO_TEST() and sideband_msg_req_encode_decode() - danvet
* Get rid of pr_fmt(), just define a prefix string instead and use
drm_printf()
* Check highest bit of VCPI in drm_dp_decode_sideband_req() - danvet
* Make the switch case order between drm_dp_decode_sideband_req() and
drm_dp_encode_sideband_req() the same - danvet
* Only check DRM_UT_DP - danvet
* Clean up sideband_msg_req_equal() from selftests a bit, and add
comments explaining why we can't just use memcmp - danvet
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-8-lyude@redhat.com
Noticed this while working on adding a drm_dp_decode_sideband_req().
DP_POWER_DOWN_PHY/DP_POWER_UP_PHY both use the same struct as
DP_ENUM_PATH_RESOURCES, so we can just combine their cases.
Changes since v2:
* Fix commit message
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903215702.16984-1-lyude@redhat.com
Yes, apparently we've been testing this for every single driver load for
quite a long time now. At least that means our PBN calculation is solid!
Anyway, introduce self tests for MST and move this into there.
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-5-lyude@redhat.com
This seems to be some leftover detritus from before the port/mstb kref
cleanup and doesn't do anything anymore, so get rid of it.
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-3-lyude@redhat.com
Makes things easier to read.
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-2-lyude@redhat.com
Fixes the following warnings:
../drivers/gpu/drm/drm_dp_mst_topology.c:1593: warning: Excess function parameter 'drm_connector' description in 'drm_dp_mst_connector_late_register'
../drivers/gpu/drm/drm_dp_mst_topology.c:1613: warning: Excess function parameter 'drm_connector' description in 'drm_dp_mst_connector_early_unregister'
../drivers/gpu/drm/drm_dp_mst_topology.c:1594: warning: Function parameter or member 'connector' not described in 'drm_dp_mst_connector_late_register'
../drivers/gpu/drm/drm_dp_mst_topology.c:1614: warning: Function parameter or member 'connector' not described in 'drm_dp_mst_connector_early_unregister'
Fixes: 562836a269 ("drm/dp_mst: Enable registration of AUX devices for MST ports")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190726142057.224121-1-sean@poorly.run
All available downstream ports - physical and logical - are exposed for
each MST device. They are listed in /dev/, following the same naming
scheme as SST devices by appending an incremental ID.
Although all downstream ports are exposed, only some will work as
expected. Consider the following topology:
+---------+
| ASIC |
+---------+
Conn-0|
|
+----v----+
+----| MST HUB |----+
| +---------+ |
| |
|Port-1 Port-2|
+-----v-----+ +-----v-----+
| MST | | SST |
| Display | | Display |
+-----------+ +-----------+
|Port-1
x
MST Path | MST Device
----------+----------------------------------
sst:0 | MST Hub
mst:0-1 | MST Display
mst:0-1-1 | MST Display's disconnected DP out
mst:0-1-8 | MST Display's internal sink
mst:0-2 | SST Display
On certain MST displays, the upstream physical port will ACK DPCD reads.
However, reads on the local logical port to the internal sink will
*NAK*. i.e. reading mst:0-1 ACKs, but mst:0-1-8 NAKs.
There may also be duplicates. Some displays will return the same GUID
when reading DPCD from both mst:0-1 and mst:0-1-8.
There are some device-dependent behavior as well. The MST hub used
during testing will actually *ACK* read requests on a disconnected
physical port, whereas the MST displays will NAK.
In light of these discrepancies, it's simpler to expose all downstream
ports - both physical and logical - and let the user decide what to use.
v3 changes:
* Change WARN_ON_ONCE -> DRM_ERROR on dpcd read errors
* Docstring and cosmetic fixes
v2 changes:
Moved remote aux device (un)registration to new mst connector late
register and early unregister helpers. Drivers should call these from
their own mst connector function hooks.
This is to solve an issue during driver unload, where mst connector
devices are unregistered before the remote aux devices are. In a setup
where aux devices are created as children of connector devices, the aux
device would be removed too early, and uncleanly. Doing so in
early_unregister solves this issue, as that is called before connector
unregistration.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723232808.28128-3-sunpeng.li@amd.com
Current driver sets the tile property only for DP MST connectors.
However there are some tiled displays where each SST connector
carries a single tile. So we need to attach this property object
for every connector and set it for every connector (DP SST and MST).
Plus since the tile information is obtained as a result of EDID
parsing, the best place to update tile property is where we update
edid property.
Also now we dont need to explicitly set this now for MST connectors.
This has been tested with xrandr --props and modetest and verified
that TILE property is exposed correctly.
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190313021722.10068-1-manasi.d.navare@intel.com
Looks like when making the final revision of:
commit 022debad06 ("drm/atomic: Add drm_atomic_state->duplicated")
I forgot to remove some of the comments that I had added to
drm_dp_atomic_find_vcpi_slots() and drm_dp_atomic_release_vcpi_slots()
that were no longer valid due to us having removed the state->duplicated
checks from each function. This also introduced an error while building
the docs with sphinx:
./drivers/gpu/drm/drm_dp_mst_topology.c:3100: WARNING: Inline literal
start-string without end-string.
So, fix that by just removing the kerneldoc comments.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 022debad06 ("drm/atomic: Add drm_atomic_state->duplicated")
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190202002023.29665-5-lyude@redhat.com
Lyude Paul