Enable ISP and camera sensor ov2685 and ov5695 for Scarlet Chromebook
Verified with:
make ARCH=arm64 dtbs_check
Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Signed-off-by: Eddie Cai <eddie.cai.linux@gmail.com>
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20201020193850.1460644-10-helen.koike@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
RK3399 has two ISPs, but only isp0 was tested.
Add isp0 node in rk3399 dtsi
Verified with:
make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/media/rockchip-isp1.yaml
Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://lore.kernel.org/r/20201020193850.1460644-9-helen.koike@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Cores that predate the introduction of ID_AA64PFR0_EL1.CSV3 to
the ARMv8 architecture have this field set to 0, even of some of
them are not affected by the vulnerability.
The kernel maintains a list of unaffected cores (A53, A55 and a few
others) so that it doesn't impose an expensive mitigation uncessarily.
As we do for CSV2, let's expose the CSV3 property to guests that run
on HW that is effectively not vulnerable. This can be reset to zero
by writing to the ID register from userspace, ensuring that VMs can
be migrated despite the new property being set.
Reported-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
FW has to configure devices' StreamIDs so that SMMU is able to lookup
context and do proper translation later on. For Armada 7040 & 8040 and
publicly available FW, most of the devices are configured properly,
but some like ap_sdhci0, PCIe, NIC still remain unassigned which
results in SMMU faults about unmatched StreamID (assuming
ARM_SMMU_DISABLE_BYPASS_BY_DEFAUL=y).
Since there is dependency on custom FW let SMMU be disabled by default.
People who still willing to use SMMU need to enable manually and
use ARM_SMMU_DISABLE_BYPASS_BY_DEFAUL=n (or via kernel command line)
with extra caution.
Fixes: 83a3545d9c ("arm64: dts: marvell: add SMMU support")
Cc: <stable@vger.kernel.org> # 5.9+
Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
With board revision 1.3, SolidRun moved the power LED to the middle of
the board. In old place of power LED a GPIO controllable heartbeat LED
was added. This commit only touches Single Shot variant, since only this
variant is all revision 1.3.
Reported-by: Alexandra Alth <alexandra@alth.de>
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
In accordance with the Generic xHCI bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "generic-xhci"-compatible nodes are
correctly named.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Update the calibration table to make the temperature more accurate.
Three platforms have been updated: ls1012a, ls1043a and ls1046a.
Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The upstream port, doesn't really follow the vendor partitioning. The
bootloader partition has one U-Boot FIT image containing all needed
bits and pieces. Even today the bootloader is already larger than the
current "bootloader" partition. Thus, fold all the partitions into one
and keep the environment one. The latter is still valid.
We keep the failsafe partitions because the first half of the SPI flash
is preinstalled by the vendor and immutable.
Fixes: 815364d042 ("arm64: dts: freescale: add Kontron sl28 support")
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the optee node which can either be enabled by a specific board or by
the bootloader.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
On the LS1028A the FlexSPI clock is connected to the first HWA output,
see Figure 7 "Clock subsystem block diagram".
Fixes: c77fae5ba0 ("arm64: dts: ls1028a: Add FlexSPI support")
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
On the LS1028A the ENETC reference clock is connected to 4th HWA output,
see Figure 7 "Clock subsystem block diagram".
The PHC may run with a wrong frequency. ptp_qoriq_auto_config() will read
the clock speed of the clock given in the device tree. It is likely that,
on the reference board this wasn't noticed because both clocks have the
same frequency. But this must not be always the case. Fix it.
Fixes: 49401003e2 ("arm64: dts: fsl: ls1028a: add ENETC 1588 timer node")
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
While running 'make dtbs_install', the following error occurs:
make[3]: *** No rule to make target 'rootfs/freescale/imx8mm-kontron-n801x-s.dts', needed by '__dtbs_install'.
It should be .dtb, not .dts.
Fixes: 8668d8b2e6 ("arm64: dts: Add the Kontron i.MX8M Mini SoMs and baseboards")
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
There are two spdif IP on imx8mq, spdif1 is for normal
spdif device, spdif2 is for HDMI ARC interface.
Enable these spdif sound card in this patch.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Configure clock rate for audio plls. audio pll1 is used
as parent clock for clocks that is multiple of 8kHz.
audio pll2 is used as parent clock for clocks that is
multiple of 11kHz.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add PCIe EP node for ls1088a to support EP mode.
Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Annotate the EMDIO1 node and describe the 2 AQR107 PHYs found on the
LX2160ARDB board. Also, add the necessary phy-handles for DPMACs 3 and 4
to their associated PHY.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add PCS MDIO nodes for the internal MDIO buses on the LX2160A, along
with their internal PCS PHYs, which will be used when the DPMAC is
in TYPE_PHY mode.
Also, rename the dpmac@x nodes to ethernet@x in order to be compliant
with the naming convention used by ethernet controllers.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add PCS MDIO nodes for the internal MDIO buses on the LS208x SoCs, along
with their internal PCS PHYs which will be used when the DPMAC object is
in TYPE_PHY mode.
Also, rename the dpmac@x nodes to ethernet@x in order to be compliant
with the naming convention used by ethernet controllers.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Annotate the EMDIO2 node and describe the other 4 10GBASER PHYs found on
the LS2088ARDB board. Also, add phy-handles for DPMACs 5-8 to their
associated PHY.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Annotate the EMDIO1 node and describe the 4 10GBASER PHYs found on the
LS2088ARDB board. Also, add phy-handles for DPMACs 1-4 to their
associated PHY.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the external MDIO device nodes found in the WRIOP global memory
region. This is needed for management of external PHYs.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Annotate the external MDIO2 node and describe the 10GBASER PHY found on
the LS1088ARDB board and add a phy-handle for DPMAC2 to link it.
Also, add the internal PCS MDIO node for the internal MDIO buses found
on the LS1088A SoC along with its internal PCS PHY and link the
corresponding DPMAC to the PCS through the pcs-handle.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Annotate the external MDIO1 node and describe the 8 QSGMII PHYs found on
the LS1088ARDB board and add phy-handles for DPMACs 3-10 to its
associated PHY. Also, add the internal PCS MDIO nodes for the internal
MDIO buses found on the LS1088A SoC along with their internal PCS PHY
and link the corresponding DPMAC to the PCS through the pcs-handle.
Also, rename the dpmac@x nodes to ethernet@x in order to be compliant
with the naming convention used by ethernet controllers.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the external MDIO device nodes found in the WRIOP global memory
region. This is needed for management of external PHYs.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add device tree support for LX2162AQDS board.
LX2162A has same die as of LX2160A with different packaging.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The pinmux subnodes are indented too much. This patch does nothing
more than remove an extra tab. There are no functional changes.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Rockchip RK3288 and RK3399Pro based VMARC SOM has sdio0 for
connecting WiFi/BT devices as a pluggable card via M.2 E-Key.
Add associated sdio0 nodes, properties.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20201023181814.220974-2-jagan@amarulasolutions.com
[moved the unrelated rtc addition to a separate patch]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add support for UHS modes for the SD card connected at sdhci1. This
involves adding regulators for voltage switching and power cycling the
SD card and removing the no-1-8-v property.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20201129175223.21751-3-nsekhar@ti.com
In debug_exception_enter() and debug_exception_exit() we trace hardirqs
on/off while RCU isn't guaranteed to be watching, and we don't save and
restore the hardirq state, and so may return with this having changed.
Handle this appropriately with new entry/exit helpers which do the bare
minimum to ensure this is appropriately maintained, without marking
debug exceptions as NMIs. These are placed in entry-common.c with the
other entry/exit helpers.
In future we'll want to reconsider whether some debug exceptions should
be NMIs, but this will require a significant refactoring, and for now
this should prevent issues with lockdep and RCU.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marins <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201130115950.22492-12-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Exceptions which can be taken at (almost) any time are consdiered to be
NMIs. On arm64 that includes:
* SDEI events
* GICv3 Pseudo-NMIs
* Kernel stack overflows
* Unexpected/unhandled exceptions
... but currently debug exceptions (BRKs, breakpoints, watchpoints,
single-step) are not considered NMIs.
As these can be taken at any time, kernel features (lockdep, RCU,
ftrace) may not be in a consistent kernel state. For example, we may
take an NMI from the idle code or partway through an entry/exit path.
While nmi_enter() and nmi_exit() handle most of this state, notably they
don't save/restore the lockdep state across an NMI being taken and
handled. When interrupts are enabled and an NMI is taken, lockdep may
see interrupts become disabled within the NMI code, but not see
interrupts become enabled when returning from the NMI, leaving lockdep
believing interrupts are disabled when they are actually disabled.
The x86 code handles this in idtentry_{enter,exit}_nmi(), which will
shortly be moved to the generic entry code. As we can't use either yet,
we copy the x86 approach in arm64-specific helpers. All the NMI
entrypoints are marked as noinstr to prevent any instrumentation
handling code being invoked before the state has been corrected.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201130115950.22492-11-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
There are periods in kernel mode when RCU is not watching and/or the
scheduler tick is disabled, but we can still take exceptions such as
interrupts. The arm64 exception handlers do not account for this, and
it's possible that RCU is not watching while an exception handler runs.
The x86/generic entry code handles this by ensuring that all (non-NMI)
kernel exception handlers call irqentry_enter() and irqentry_exit(),
which handle RCU, lockdep, and IRQ flag tracing. We can't yet move to
the generic entry code, and already hadnle the user<->kernel transitions
elsewhere, so we add new kernel<->kernel transition helpers alog the
lines of the generic entry code.
Since we now track interrupts becoming masked when an exception is
taken, local_daif_inherit() is modified to track interrupts becoming
re-enabled when the original context is inherited. To balance the
entry/exit paths, each handler masks all DAIF exceptions before
exit_to_kernel_mode().
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201130115950.22492-10-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Exceptions from EL1 may be taken when RCU isn't watching (e.g. in idle
sequences), or when the lockdep hardirqs transiently out-of-sync with
the hardware state (e.g. in the middle of local_irq_enable()). To
correctly handle these cases, we'll need to save/restore this state
across some exceptions taken from EL1.
A series of subsequent patches will update EL1 exception handlers to
handle this. In preparation for this, and to avoid dependencies between
those patches, this patch adds two new fields to struct pt_regs so that
exception handlers can track this state.
Note that this is placed in pt_regs as some entry/exit sequences such as
el1_irq are invoked from assembly, which makes it very difficult to add
a separate structure as with the irqentry_state used by x86. We can
separate this once more of the exception logic is moved to C. While the
fields only need to be bool, they are both made u64 to keep pt_regs
16-byte aligned.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201130115950.22492-9-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
When built with PROVE_LOCKING, NO_HZ_FULL, and CONTEXT_TRACKING_FORCE
will WARN() at boot time that interrupts are enabled when we call
context_tracking_user_enter(), despite the DAIF flags indicating that
IRQs are masked.
The problem is that we're not tracking IRQ flag changes accurately, and
so lockdep believes interrupts are enabled when they are not (and
vice-versa). We can shuffle things so to make this more accurate. For
kernel->user transitions there are a number of constraints we need to
consider:
1) When we call __context_tracking_user_enter() HW IRQs must be disabled
and lockdep must be up-to-date with this.
2) Userspace should be treated as having IRQs enabled from the PoV of
both lockdep and tracing.
3) As context_tracking_user_enter() stops RCU from watching, we cannot
use RCU after calling it.
4) IRQ flag tracing and lockdep have state that must be manipulated
before RCU is disabled.
... with similar constraints applying for user->kernel transitions, with
the ordering reversed.
The generic entry code has enter_from_user_mode() and
exit_to_user_mode() helpers to handle this. We can't use those directly,
so we add arm64 copies for now (without the instrumentation markers
which aren't used on arm64). These replace the existing user_exit() and
user_exit_irqoff() calls spread throughout handlers, and the exception
unmasking is left as-is.
Note that:
* The accounting for debug exceptions from userspace now happens in
el0_dbg() and ret_to_user(), so this is removed from
debug_exception_enter() and debug_exception_exit(). As
user_exit_irqoff() wakes RCU, the userspace-specific check is removed.
* The accounting for syscalls now happens in el0_svc(),
el0_svc_compat(), and ret_to_user(), so this is removed from
el0_svc_common(). This does not adversely affect the workaround for
erratum 1463225, as this does not depend on any of the state tracking.
* In ret_to_user() we mask interrupts with local_daif_mask(), and so we
need to inform lockdep and tracing. Here a trace_hardirqs_off() is
sufficient and safe as we have not yet exited kernel context and RCU
is usable.
* As PROVE_LOCKING selects TRACE_IRQFLAGS, the ifdeferry in entry.S only
needs to check for the latter.
* EL0 SError handling will be dealt with in a subsequent patch, as this
needs to be treated as an NMI.
Prior to this patch, booting an appropriately-configured kernel would
result in spats as below:
| DEBUG_LOCKS_WARN_ON(lockdep_hardirqs_enabled())
| WARNING: CPU: 2 PID: 1 at kernel/locking/lockdep.c:5280 check_flags.part.54+0x1dc/0x1f0
| Modules linked in:
| CPU: 2 PID: 1 Comm: init Not tainted 5.10.0-rc3 #3
| Hardware name: linux,dummy-virt (DT)
| pstate: 804003c5 (Nzcv DAIF +PAN -UAO -TCO BTYPE=--)
| pc : check_flags.part.54+0x1dc/0x1f0
| lr : check_flags.part.54+0x1dc/0x1f0
| sp : ffff80001003bd80
| x29: ffff80001003bd80 x28: ffff66ce801e0000
| x27: 00000000ffffffff x26: 00000000000003c0
| x25: 0000000000000000 x24: ffffc31842527258
| x23: ffffc31842491368 x22: ffffc3184282d000
| x21: 0000000000000000 x20: 0000000000000001
| x19: ffffc318432ce000 x18: 0080000000000000
| x17: 0000000000000000 x16: ffffc31840f18a78
| x15: 0000000000000001 x14: ffffc3184285c810
| x13: 0000000000000001 x12: 0000000000000000
| x11: ffffc318415857a0 x10: ffffc318406614c0
| x9 : ffffc318415857a0 x8 : ffffc31841f1d000
| x7 : 647261685f706564 x6 : ffffc3183ff7c66c
| x5 : ffff66ce801e0000 x4 : 0000000000000000
| x3 : ffffc3183fe00000 x2 : ffffc31841500000
| x1 : e956dc24146b3500 x0 : 0000000000000000
| Call trace:
| check_flags.part.54+0x1dc/0x1f0
| lock_is_held_type+0x10c/0x188
| rcu_read_lock_sched_held+0x70/0x98
| __context_tracking_enter+0x310/0x350
| context_tracking_enter.part.3+0x5c/0xc8
| context_tracking_user_enter+0x6c/0x80
| finish_ret_to_user+0x2c/0x13cr
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201130115950.22492-8-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
In preparation for reworking the EL1 irq/nmi entry code, move the
existing logic to C. We no longer need the asm_nmi_enter() and
asm_nmi_exit() wrappers, so these are removed. The new C functions are
marked noinstr, which prevents compiler instrumentation and runtime
probing.
In subsequent patches we'll want the new C helpers to be called in all
cases, so we don't bother wrapping the calls with ifdeferry. Even when
the new C functions are stubs the trivial calls are unlikely to have a
measurable impact on the IRQ or NMI paths anyway.
Prototypes are added to <asm/exception.h> as otherwise (in some
configurations) GCC will complain about the lack of a forward
declaration. We already do this for existing function, e.g.
enter_from_user_mode().
The new helpers are marked as noinstr (which prevents all
instrumentation, tracing, and kprobes). Otherwise, there should be no
functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201130115950.22492-7-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
In a subsequent patch ret_to_user will need to make a C function call
(in some configurations) which may clobber x0-x18 at the start of the
finish_ret_to_user block, before enable_step_tsk consumes the flags
loaded into x1.
In preparation for this, let's load the flags into x19, which is
preserved across C function calls. This avoids a redundant reload of the
flags and ensures we operate on a consistent shapshot regardless.
There should be no functional change as a result of this patch. At this
point of the entry/exit paths we only need to preserve x28 (tsk) and the
sp, and x19 is free for this use.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201130115950.22492-6-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
In later patches we'll want to extend enter_from_user_mode() and add a
corresponding exit_to_user_mode(). As these will be common for all
entries/exits from userspace, it'd be better for these to live in
entry-common.c with the rest of the entry logic.
This patch moves enter_from_user_mode() into entry-common.c. As with
other functions in entry-common.c it is marked as noinstr (which
prevents all instrumentation, tracing, and kprobes) but there are no
other functional changes.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201130115950.22492-5-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Functions in entry-common.c are marked as notrace and NOKPROBE_SYMBOL(),
but they're still subject to other instrumentation which may rely on
lockdep/rcu/context-tracking being up-to-date, and may cause nested
exceptions (e.g. for WARN/BUG or KASAN's use of BRK) which will corrupt
exceptions registers which have not yet been read.
Prevent this by marking all functions in entry-common.c as noinstr to
prevent compiler instrumentation. This also blacklists the functions for
tracing and kprobes, so we don't need to handle that separately.
Functions elsewhere will be dealt with in subsequent patches.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201130115950.22492-4-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Core code disables RCU when calling arch_cpu_idle(), so it's not safe
for arch_cpu_idle() or its calees to be instrumented, as the
instrumentation callbacks may attempt to use RCU or other features which
are unsafe to use in this context.
Mark them noinstr to prevent issues.
The use of local_irq_enable() in arch_cpu_idle() is similarly
problematic, and the "sched/idle: Fix arch_cpu_idle() vs tracing" patch
queued in the tip tree addresses that case.
Reported-by: Marco Elver <elver@google.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201130115950.22492-3-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
In el0_svc_common() we unmask exceptions before we call user_exit(), and
so there's a window where an IRQ or debug exception can be taken while
RCU is not watching. In do_debug_exception() we account for this in via
debug_exception_{enter,exit}(), but in the el1_irq asm we do not and we
call trace functions which rely on RCU before we have a guarantee that
RCU is watching.
Let's avoid this by having el0_svc_common() exit userspace before
unmasking exceptions, matching what we do for all other EL0 entry paths.
We can use user_exit_irqoff() to avoid the pointless save/restore of IRQ
flags while we're sure exceptions are masked in DAIF.
The workaround for Cortex-A76 erratum 1463225 may trigger a debug
exception before this point, but the debug code invoked in this case is
safe even when RCU is not watching.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201130115950.22492-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
In order to reduce the impact of the VPT parsing happening on the GIC,
we can split the vcpu reseidency in two phases:
- programming GICR_VPENDBASER: this still happens in vcpu_load()
- checking for the VPT parsing to be complete: this can happen
on vcpu entry (in kvm_vgic_flush_hwstate())
This allows the GIC and the CPU to work in parallel, rewmoving some
of the entry overhead.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Shenming Lu <lushenming@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201128141857.983-3-lushenming@huawei.com
Up-to-date version of V7 schematic is on new URL linked from official
tech-spec webpage http://espressobin.net/tech-spec/
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Some hardware platforms required CP20x USB to Serial converter
in order to work onboard functionalities like Bluetooth.
An example of such a platform is from Engicam's PX30 (ARM64).
Mark it as module in defconfig.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20201109181017.206834-10-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
In order to work LDVS, DSI in mainline tree for Rockchip based
hardware platforms, the associated PHY driver has to enable
in default defconfig.
Enable rockchip DSI phy driver.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20201109181017.206834-9-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Now, some of the rockchip hardware platforms do enable
lvds in mainline tree.
So, enable Rockchip LVDS driver via default defconfig.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20201109181017.206834-8-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Engicam PX30 carrier boards like EDIMM2.2 and C.TOUCH2.0 have
an onboard Sterling-LWD Wifi/BT chip based on BCM43430 connected
on the UART bus.
UART bus on the design routed via USB to UART CP20x bridge. This
bridge powered from 3V3 regualtor gpio.
This patch adds BT enablement nodes for these respective boards.
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20201109181017.206834-7-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Engicam PX30 carrier boards like EDIMM2.2 and C.TOUCH2.0 have
an onboard Sterling-LWD Wifi/BT chip based on BCM43430 connected
on the SDIO bus.
The SDIO power sequnce is connacted with exteernal 32KHz oscillator
and it require 3V3 regulator input.
This patch adds WiFi enablement nodes for these respective boards.
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20201109181017.206834-6-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
C.TOUCH 2.0 is a general purpose carrier board with capacitive
touch interface support.
10.1" OF is a capacitive touch 10.1" Open Frame panel solutions.
PX30.Core needs to mount on top of C.TOUCH 2.0 carrier with pluged
10.1" OF for creating complete PX30.Core C.TOUCH 2.0 10.1" Open Frame.
Add support for it.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20201109181017.206834-5-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Engicam EDIMM2.2 and C.Touch 2.0 Kits support USB Host
and OTG ports.
Add support to enable USB on these kits while mounting
px30-core SOM.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20201109181017.206834-2-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
A test with the command below gives for example this error:
/arch/arm64/boot/dts/rockchip/rk3399-evb.dt.yaml:
sdhci@fe330000: $nodename:0: 'sdhci@fe330000'
does not match '^mmc(@.*)?$'
Fix it by renaming sdhci to mmc.
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/
mmc/arasan,sdhci.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20201116132311.8318-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Now that driver support for the RK3328's audio codec, and the plumbing
is defined at the SoC level, we can enable analog audio at the board
level.
Enable analog audio by enabling the codec and the I2S interface
connected and the simple-audio-card that binds them together.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20201126073336.30794-4-wens@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The RK3328-ROC-CC already has HDMI display output enabled. Now that
audio for the HDMI controller is supported, it can be enabled as well.
Enable the simple-audio-card, and the I2S interface the audio is fed
from.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20201126073336.30794-3-wens@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The board has a standard USB A female port connected to the USB OTG
controller's data pins. Set dr_mode in the OTG controller node to
indicate this usage, instead of having the implementation guess.
Fixes: 2171f4fdac ("arm64: dts: rockchip: add roc-rk3328-cc board")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20201126073336.30794-2-wens@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
idle path. Similar to the entry path the low level idle functions have to
be non-instrumentable.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl/DpAUTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoXSLD/9klc0YimnEnROW6Q5Svb2IcyIutmXF
bOIY1bYYoKILOBj3wyvDUhmdMuq5zh7H9yG11hO8MaVVWVQcLcOMLdHTYm9dcdmF
xQk33+xqjuhRShB+nEmC9ayYtWogtH6W6uZ6WDtF9ZltMKU85n5ddGJ/Fvo+HoCb
NbOdHGJdJ3/3ZCeHnxOnxM+5/GwjkBuccTV/tXmb3yXrfU9DBySyQ4/UchcpF43w
LcEb0kiQbpZsBTByKJOQV8+RR654S0sILlvRwVXpmj94vrgGwhlVk1/9rz7tkOhF
ksoo1mTVu75LMt22G/hXxE63787yRvFdHjapf0+kCOAuhl992NK+xlGDH8o9DXcu
9y73D4bI0HnDFs20w6vs20iLvxECJiYHJqlgR5ZwFUToceaNgtiYr8kzuD7Zbae1
KG2E7BuNSwHWMtf97fGn44GZknPEOaKdDn4Wv6/bvKHxLm77qe11RKF70Stcz2AI
am13KmQzzsHGF5qNWwpElRUxSdxfJMR66RnOdTQULGrRedaZTFol/y2pnVzTSe3k
SZnlpL5kE7y92UYDogPb5wWA7b+YkJN0OdSkRFy1FH26ZG8E4M7ZJ2tql5Sw7pGM
lsTjXpAUphnK5rz7QcYE8KAZWj//fIAcElIrvdklVcBnS3IqjfksYW27B64133vx
cT1B/lA1PHXj6Q==
=raED
-----END PGP SIGNATURE-----
Merge tag 'locking-urgent-2020-11-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"Two more places which invoke tracing from RCU disabled regions in the
idle path.
Similar to the entry path the low level idle functions have to be
non-instrumentable"
* tag 'locking-urgent-2020-11-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
intel_idle: Fix intel_idle() vs tracing
sched/idle: Fix arch_cpu_idle() vs tracing
Use property name `phy-handle` instead of the deprecated `phy` to
connect eth2 to the PHY.
Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes: 7109d817db ("arm64: dts: marvell: add DTS for Turris Mox")
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
There are two SATA ports per CP110. Each of them has a dedicated
interrupt. Describe the real hardware by adding two SATA ports to the
CP110 SATA node.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
This adds support for ESPRESSObin-Ultra from Globalscale.
Specifications are similar to the base ESPRESSObin board, with main
difference being being WAN port with PoE capability and 2 additional ethernet ports.
Full specifications:
1x Marvell 64 bit Dual Core ARM A53 Armada 3700 SOC clocked up to 1.2Ghz
1x Topaz 6341 Networking Switch
1GB DDR4
8GB eMMC
1x WAN with 30W POE
4x Gb LAN
1x RTC Clock and battery
1x DC Jack
1x USB 3.0 Type A
1x USB 2.0 Type A
1x SIM NanoSIM card Slot
1x Power Button
4x LED
1x Reset button
1x microUSB for UART
1x M.2 2280 slot for memory
1x 2x2 802.11ac Wi-Fi
1x MiniPCIE slot for Wi-Fi (PCIe interface)
Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
LED2 is connected to MPP1_2 pin. It is working only on V7 boards.
V5 boards have hw bug which cause that LED2 is non-working.
So enable LED2 only for Espressobin V7 boards.
Note that LED1 is connected to LED_WLAN# pin on miniPCIe card and LED3 to
power supply. Therefore on Espressobin board only LED2 can be controlled
directly from the host. LED1 is possible to control via WiFi card inserted
in miniPCIe slot if driver for particular card supports it.
Signed-off-by: Pali Rohár <pali@kernel.org>
Tested-by: Gérald Kerma <gerald@gk2.net>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Add initial support for the IEI Puzzle-M801 1U Rackmount Network
Appliance board.
The board is based on the quad-core Marvell Armada 8040 SoC and supports
up to 16 GB of DDR4 2400 MHz ECC RAM. It has a PCIe x16 slot (x2 lanes
only) and an M.2 type B slot.
Main system hardware:
2x USB 3.0
4x Gigabit Ethernet
2x SFP+
1x SATA 3.0
1x M.2 type B
1x RJ45 UART
1x SPI flash
1x IEI WT61P803 PUZZLE Microcontroller
1x EPSON RX8010 RTC (used instead of the integrated Marvell RTC controller)
6x SFP+ LED
1x HDD LED
All of the hardware listed above is supported and tested in this port.
Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Robert Marko <robert.marko@sartura.hr>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
eMMC definitions in files armada-3720-espressobin-emmc.dts and
armada-3720-espressobin-v7-emmc.dts is same. So move it into common
armada-3720-espressobin.dtsi file with status "disabled".
This change simplifies eMMC variants of DTS files for Espressobin.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andre Heider <a.heider@gmail.com>
Tested-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
The included armada-37xx.dtsi already defines these two aliases.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Now that the switch ports have a label in the .dtsi, simplify the whole
"switch0" block for the v7 dts files.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
There are couple of places where INTA interrupt controller
lacks #interrupt-cells property. This leads to warnings of
the type:
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi:147.51-156.5: Warning (interrupt_provider): /bus@100000/main-navss/interrupt-controller@33d00000: Missing #interrupt-cells in interrupt provider
when building TI device-tree files with W=2 warning level.
Fix these.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20201127210128.9151-1-nsekhar@ti.com
Our Meltdown mitigation state isn't exposed outside of cpufeature.c,
contrary to the rest of the Spectre mitigation state. As we are going
to use it in KVM, expose a arm64_get_meltdown_state() helper which
returns the same possible values as arm64_get_spectre_v?_state().
Signed-off-by: Marc Zyngier <maz@kernel.org>
Enable the ARM SCMI protocol and the common clock, cpufreq, reset and
sensors drivers. Broadcom STB platforms (ARCH_BRCMSTB) implement SCMI to
provide support for CPU frequency scaling, clock configuration and
temperature and current sensors.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Another set of patches for devicetree files and Arm
SoC specific drivers:
- A fix for OP-TEE shared memory on non-SMP systems
- multiple code fixes for the OMAP platform, including
one regression for the CPSW network driver and a few
runtime warning fixes
- Some DT patches for the Rockchip RK3399 platform,
in particular fixing the MMC device ordering that
recently became nondeterministic with async probe.
- Multiple DT fixes for the Tegra platform, including
a regression fix for suspend/resume on TX2
- A regression fix for a user-triggered fault in the
NXP dpio driver
- A regression fix for a bug caused by an earlier bug
fix in the xilinx firmware driver
- Two more DTC warning fixes
- Sylvain Lemieux steps down as maintainer for the
NXP LPC32xx platform
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=yGOq
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-fixes-v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Another set of patches for devicetree files and Arm SoC specific
drivers:
- A fix for OP-TEE shared memory on non-SMP systems
- multiple code fixes for the OMAP platform, including one regression
for the CPSW network driver and a few runtime warning fixes
- Some DT patches for the Rockchip RK3399 platform, in particular
fixing the MMC device ordering that recently became
nondeterministic with async probe.
- Multiple DT fixes for the Tegra platform, including a regression
fix for suspend/resume on TX2
- A regression fix for a user-triggered fault in the NXP dpio driver
- A regression fix for a bug caused by an earlier bug fix in the
xilinx firmware driver
- Two more DTC warning fixes
- Sylvain Lemieux steps down as maintainer for the NXP LPC32xx
platform"
* tag 'arm-soc-fixes-v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
arm64: tegra: Fix Tegra234 VDK node names
arm64: tegra: Wrong AON HSP reg property size
arm64: tegra: Fix USB_VBUS_EN0 regulator on Jetson TX1
arm64: tegra: Correct the UART for Jetson Xavier NX
arm64: tegra: Disable the ACONNECT for Jetson TX2
optee: add writeback to valid memory type
firmware: xilinx: Use hash-table for api feature check
firmware: xilinx: Fix SD DLL node reset issue
soc: fsl: dpio: Get the cpumask through cpumask_of(cpu)
ARM: dts: dra76x: m_can: fix order of clocks
bus: ti-sysc: suppress err msg for timers used as clockevent/source
MAINTAINERS: Remove myself as LPC32xx maintainers
arm64: dts: qcom: clear the warnings caused by empty dma-ranges
arm64: dts: broadcom: clear the warnings caused by empty dma-ranges
ARM: dts: am437x-l4: fix compatible for cpsw switch dt node
arm64: dts: rockchip: Reorder LED triggers from mmc devices on rk3399-roc-pc.
arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards.
arm64: dts: rockchip: Remove system-power-controller from pmic on Odroid Go Advance
arm64: dts: rockchip: fix NanoPi R2S GMAC clock name
ARM: OMAP2+: Manage MPU state properly for omap_enter_idle_coupled()
...
Not counting TnD, which KVM doesn't currently consider, CSSELR_EL1
can have a maximum value of 0b1101 (13), which corresponds to an
instruction cache at level 7. With CSSELR_MAX set to 12 we can
only select up to cache level 6. Change it to 14.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201126134641.35231-2-drjones@redhat.com
We currently try to emit *.init.rodata.* twice, once in INIT_DATA, and once
in the line immediately following it. As the two section definitions are
identical, the latter is redundant and can be dropped.
This patch drops the redundant *.init.rodata.* section definition.
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/1605750340-910-1-git-send-email-tangyouling@loongson.cn
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
- Fix alignment of the new HYP sections
- Fix GICR_TYPER access from userspace
S390:
- do not reset the global diag318 data for per-cpu reset
- do not mark memory as protected too early
- fix for destroy page ultravisor call
x86:
- fix for SEV debugging
- fix incorrect return code
- fix for "noapic" with PIC in userspace and LAPIC in kernel
- fix for 5-level paging
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl/BKpQUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPrZgf+Jdw1ONU5hFLl5Xz2YneVppqMr3nh
X/Nr/dGzP+ve2FPNgkMotwqOWb/6jwKYKbliB2Q6fS51/7MiV7TDizna8ZpzEn12
M0/NMWtW7Luq7yTTnXUhClG4QfRvn90EaflxUYxCBSRRhDleJ9sCl4Ga5b1fDIdQ
AeDdqJV4ElCGUrPM1my4vemrbFeiiEeDeWZvb6TP5LlJS+EDZeehk9zEAB7PFwAu
oX3O8WUbRxRYakZR1PPIn8e0qh2zaVDFUk/sZKJLOCCPx2UnOErf3jV6rQEMeSPC
5aOspfq+gI3jukufdyNxcKxRSj8Jw63f0vDaUgd4H71dsG390gM6onQiQg==
=IyC5
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix alignment of the new HYP sections
- Fix GICR_TYPER access from userspace
S390:
- do not reset the global diag318 data for per-cpu reset
- do not mark memory as protected too early
- fix for destroy page ultravisor call
x86:
- fix for SEV debugging
- fix incorrect return code
- fix for 'noapic' with PIC in userspace and LAPIC in kernel
- fix for 5-level paging"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: x86/mmu: Fix get_mmio_spte() on CPUs supporting 5-level PT
KVM: x86: Fix split-irqchip vs interrupt injection window request
KVM: x86: handle !lapic_in_kernel case in kvm_cpu_*_extint
MAINTAINERS: Update email address for Sean Christopherson
MAINTAINERS: add uv.c also to KVM/s390
s390/uv: handle destroy page legacy interface
KVM: arm64: vgic-v3: Drop the reporting of GICR_TYPER.Last for userspace
KVM: SVM: fix error return code in svm_create_vcpu()
KVM: SVM: Fix offset computation bug in __sev_dbg_decrypt().
KVM: arm64: Correctly align nVHE percpu data
KVM: s390: remove diag318 reset code
KVM: s390: pv: Mark mm as protected after the set secure parameters and improve cleanup
__extended_idmap_trampoline() was removed a long time ago by
3421e9d88d ("arm64: KVM: Simplify HYP init/teardown") so remove the
unused function prototype.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201118194402.2892-4-will@kernel.org
kvm_arch_vm_ioctl_check_extension() is only called from
kvm_vm_ioctl_check_extension(), so we can inline it and remove the extra
function.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201118194402.2892-3-will@kernel.org
'struct kvm_arch_memory_slot' isn't part of the user ABI, so move it out
of the uapi/ headers in case we start using it in future and accidentally
back ourselves into a corner.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201118194402.2892-2-will@kernel.org
- Fix kerneldoc warnings generated by ACPI IORT code
- Fix pte_accessible() so that access flag is ignored
- Fix missing header #include
- Fix loss of software dirty bit across pte_wrprotect() when HW DBM is enabled
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl/A4moQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNKhtB/4kdY/Do6h8ivkVNy1oId9mWSHrk9HwoEmS
wFvyTIuyhaS2NlNW2/9V662e+wWhzv0ULkDu6aSVsnuw88b1yz1X2ytuh/t8beMJ
PZGWO9UUuVuf+YjcaI7ygppXHILQWdau8eyOVMTciMOYYZRdIqex8WPApxpATRO4
7TphGUuo0IH0GGwq4u6JhPrT0Ihr9txWnvqnM8+fP/y3IbFncH+GKjxZq0k0BwcK
1fkIINwRFHmvkPouPyRPzE6DBudIlHPMGS68CXJV5/T4+JQ5bjc/bmAm8AYVVgip
xSUeKg/x7AMF/8vho0pnvxAqh0FF6c370EjiKBk6AIGNJhjdROxt
=e2/i
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The main changes are relating to our handling of access/dirty bits,
where our low-level page-table helpers could lead to stale young
mappings and loss of the dirty bit in some cases (the latter has not
been observed in practice, but could happen when clearing "soft-dirty"
if we enabled that). These were posted as part of a larger series, but
the rest of that is less urgent and needs a v2 which I'll get to
shortly.
In other news, we've now got a set of fixes to resolve the
lockdep/tracing problems that have been plaguing us for a while, but
they're still a bit "fresh" and I plan to send them to you next week
after we've got some more confidence in them (although initial CI
results look good).
Summary:
- Fix kerneldoc warnings generated by ACPI IORT code
- Fix pte_accessible() so that access flag is ignored
- Fix missing header #include
- Fix loss of software dirty bit across pte_wrprotect() when HW DBM
is enabled"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: pgtable: Ensure dirty bit is preserved across pte_wrprotect()
arm64: pgtable: Fix pte_accessible()
ACPI/IORT: Fix doc warnings in iort.c
arm64/fpsimd: add <asm/insn.h> to <asm/kprobes.h> to fix fpsimd build
Provide support for additional kernel command line parameters to be
concatenated onto the end of the command line provided by the
bootloader. Additional parameters are specified in the CONFIG_CMDLINE
option when CONFIG_CMDLINE_EXTEND is selected, matching other
architectures and leveraging existing support in the FDT and EFI stub
code.
Special care must be taken for the arch-specific nokaslr parsing. Search
the bootargs FDT property and the CONFIG_CMDLINE when
CONFIG_CMDLINE_EXTEND is in use.
There are a couple of known use cases for this feature:
1) Switching between stable and development kernel versions, where one
of the versions benefits from additional command line parameters,
such as debugging options.
2) Specifying additional command line parameters, for additional tuning
or debugging, when the bootloader does not offer an interactive mode.
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Link: https://lore.kernel.org/r/20200921191557.350256-3-tyhicks@linux.microsoft.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Don't ask for *the* command line string to search for "nokaslr" in
kaslr_early_init(). Instead, tell a helper function to search all the
appropriate command line strings for "nokaslr" and return the result.
This paves the way for searching multiple command line strings without
having to concatenate the strings in early init.
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Link: https://lore.kernel.org/r/20200921191557.350256-2-tyhicks@linux.microsoft.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
These changes are mostly minor fixes across the board, but they also
enable PMUs on Tegra186 and enable SATA support on Jetson TX2.
-----BEGIN PGP SIGNATURE-----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=WWBT
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.11-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
arm64: tegra: Device tree changes for v5.11-rc1
These changes are mostly minor fixes across the board, but they also
enable PMUs on Tegra186 and enable SATA support on Jetson TX2.
* tag 'tegra-for-5.11-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Fix Tegra194 HDA {clock,reset}-names ordering
arm64: tegra: Enable AHCI on Jetson TX2
arm64: tegra: Change order of SATA resets for Tegra132 and Tegra210
arm64: tegra: Add XUSB pad controller interrupt
arm64: tegra: Rename ADMA device nodes for Tegra210
arm64: tegra: Hook up edp interrupt on Tegra132 SOCTHERM
arm64: tegra: Add missing hot temperatures to Tegra210 thermal-zones
arm64: tegra: Add missing gpu-throt-level to Tegra210 soctherm
arm64: tegra: Add missing hot temperatures to Tegra132 thermal-zones
arm64: tegra: Fix DT binding for IO High Voltage entry
arm64: tegra: Fix GIC400 missing GICH/GICV register regions
arm64: tegra: Add missing CPU PMUs on Tegra186
arm64: tegra: Fix Tegra234 VDK node names
arm64: tegra: Wrong AON HSP reg property size
arm64: tegra: Fix USB_VBUS_EN0 regulator on Jetson TX1
arm64: tegra: Correct the UART for Jetson Xavier NX
arm64: tegra: Disable the ACONNECT for Jetson TX2
Link: https://lore.kernel.org/r/20201127144329.124891-5-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- PCIe endpoint support for the R-Car H3 ES2.0+ SoC.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCX8D7wQAKCRCKwlD9ZEnx
cGthAP9Tnhv6LWGL4002pLs2LS/qnPqIhWLjh+o989pKkCEJtAD9GKuzI0+tiSuk
CfPOhZUFUI7eZ99icVBPbc0yamB9UQs=
=lR48
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-dt-for-v5.11-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v5.11 (take two)
- PCIe endpoint support for the R-Car H3 ES2.0+ SoC.
* tag 'renesas-arm-dt-for-v5.11-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: r8a77951: Add PCIe EP nodes
Link: https://lore.kernel.org/r/20201127132155.77418-2-geert@linux-m68k.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Tegra234 VDK support that was introduced in v5.10-rc1 is now enabled
by default.
-----BEGIN PGP SIGNATURE-----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=KgUW
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.11-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig
arm64: tegra: Default configuration changes for v5.11-rc1
The Tegra234 VDK support that was introduced in v5.10-rc1 is now enabled
by default.
* tag 'tegra-for-5.11-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: defconfig: Enable Tegra234 support
Link: https://lore.kernel.org/r/20201127144329.124891-6-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
MDI_TP_P0 (gpio51) is used by pwm1 and uart2 (uart1 on gpio-header)
MDI_RP_P4 (gpio67) is used by pwm4 and spi1
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://lore.kernel.org/r/20201016204019.2606-3-linux@fw-web.de
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
mt7622 only supports 6 pwm-channels so drop pwm7
third pwm (pwm2) is inverted and connected to fan-socket
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://lore.kernel.org/r/20201016204019.2606-2-linux@fw-web.de
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
- Fix alignment of the new HYP sections
- Fix GICR_TYPER access from userspace
-----BEGIN PGP SIGNATURE-----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=oova
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-5.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master
KVM/arm64 fixes for v5.10, take #4
- Fix alignment of the new HYP sections
- Fix GICR_TYPER access from userspace
J7200 main_i2c1 is connected to the i2c bus on the CPB marked as main_i2c3
The i2c1 devices on the CPB are _not_ connected to the SoC, they are not
usable with the J7200 SOM.
Correct the expander name from exp4 to exp3 and at the same time add the
line names as well.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20201120073533.24486-3-peter.ujfalusi@ti.com
The J7200 SOM have additional io expander which is used to control several
SOM level muxes to make sure that the correct signals are routed to the
correct pin on the SOM <-> CPB connectors.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20201120073533.24486-2-peter.ujfalusi@ti.com
We currently gate the update of the PMU state on the PMU being "ready".
The "ready" state is only set to true when the first vcpu run is
successful, and if it isn't, we never reach the update code.
So the "ready" state is never the right thing to check for, and it
should instead be the presence of the PMU feature, which makes
a bit more sense.
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
The handling of traps in access_pmu_evcntr() has a couple of
omminous "else return false;" statements that don't make any sense:
the decoding tree coverse all the registers that trap to this handler,
and returning false implies that we change PC, which we don't.
Get rid of what is evidently dead code.
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
There is no RAZ/WI handling allowed for the PMU registers in the
ARMv8 architecture. Nobody can remember how we cam to the conclusion
that we could do this, but the ARMv8 ARM is pretty clear that we cannot.
Remove the RAZ/WI handling of the PMU system registers when it is
not configured.
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
The ARMv8 architecture says that in the absence of FEAT_PMUv3,
all the PMU-related register generate an UNDEF. Let's make
sure that all our PMU handers catch this case by hooking into
check_pmu_access_disabled(), and add checks in a couple of
other places.
Note that we still cannot deliver an exception into the guest
as the offending cases are already caught by the RAZ/WI handling.
But this puts us one step away to architectural compliance.
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
We accept to configure a PMU when a vcpu is created, even if the
HW (or the host) doesn't support it. This results in failures
when attributes get set, which is a bit odd as we should have
failed the vcpu creation the first place.
Move the check to the point where we check the vcpu feature set,
and fail early if we cannot support a PMU. This further simplifies
the attribute handling.
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
We always expose the HW view of PMU in ID_AA64FDR0_EL1.PMUver,
even when the PMU feature is disabled, while the architecture
says that FEAT_PMUv3 not being implemented should result in this
field being zero.
Let's follow the architecture's guidance.
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
When enabling the PMU in kvm_arm_pmu_v3_enable(), KVM returns early if the
PMU flag created is false and skips any other checks. Because PMU emulation
is gated only on the VCPU feature being set, this makes it possible for
userspace to get away with setting the VCPU feature but not doing any
initialization for the PMU. Fix it by returning an error when trying to run
the VCPU if the PMU hasn't been initialized correctly.
The PMU is marked as created only if the interrupt ID has been set when
using an in-kernel irqchip. This means the same check in
kvm_arm_pmu_v3_enable() is redundant, remove it.
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201126144916.164075-1-alexandru.elisei@arm.com
There are a number of places where we check for the KVM_ARM_VCPU_PMU_V3
feature. Wrap this check into a new kvm_vcpu_has_pmu(), and use
it at the existing locations.
No functional change.
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Registers x0/x1 get repeateadly pushed and poped during a host
HVC call. Instead, leave the registers on the stack, trading
a store instruction on the fast path for an add on the slow path.
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Move the setting of SSBS directly into the HVC handler, using
the C helpers rather than the inline asssembly code.
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Directly using the kimage_voffset variable is fine for now, but
will become more problematic as we start distrusting EL1.
Instead, patch the kimage_voffset into the HYP text, ensuring
we don't have to load an untrusted value later on.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Add pwm to mt8183 and backlight to mt8183-kukui.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20201124041253.4181273-1-hsinyi@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The SMI (Smart Multimedia Interface) Common is a bridge between the m4u
(Multimedia Memory Management Unit) and the Multimedia HW. This block is
needed to support different multimedia features, like display, video
decode, and camera. Also is needed to control the power domains of such
HW blocks.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20201030113622.201188-13-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The pumpkin board is made by Gossamer Engineering and is using
a MediaTek SoC. The board currently comes in two available version:
MT8516 SoC and MT8167 SoC.
The board provides the following IOs: eMMC, NAND, SD card, USB type-A,
Ethernet, Wi-Fi, Bluetooth, Audio (jack out, 2 PDM port, 1 analog in),
serial over USB, HDMI, DSI, CSI, and an expansion header.
The board can be powered by battery and/or via a USB Type-C port and
is using a PMIC MT6392.
The eMMC and NAND are sharing pins and cannot be used together.
This commit is adding the basic boot support for the Pumpkin MT8167
board.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Link: https://lore.kernel.org/r/20201027194816.1227654-3-fparent@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The MT8167 SoC provides the following peripherals: GPIO, UART, USB2,
SPI, eMMC, SDIO, NAND, Flash, ADC, I2C, PWM, TImers, IR, Ethernet,
Audio (I2S, SPDIF, TDM, HDMI), HDMI, DSI, CSI, MDP (Multimedia Data
Path), Video encoding (H.264), Video Decoding (H.264, VP8).
The MT8167 is compatible with MT8516 but provides multimedia IPs to it.
This commit is just adding the basic dtsi file with the support of the
following IOs: GPIO, Clocks.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Link: https://lore.kernel.org/r/20201027194816.1227654-2-fparent@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
- Cleanups of the hisilicon DTS to align with the dtschema. All of them do not
have any functional effect except passing dtschema checks or dtc W=2 builds.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=pM5V
-----END PGP SIGNATURE-----
Merge tag 'hisi-arm64-dt-for-5.11' of git://github.com/hisilicon/linux-hisi into arm/dt
ARM64: DT: Hisilicon ARM64 DT updates for 5.11
- Cleanups of the hisilicon DTS to align with the dtschema. All of them do not
have any functional effect except passing dtschema checks or dtc W=2 builds.
* tag 'hisi-arm64-dt-for-5.11' of git://github.com/hisilicon/linux-hisi:
arm64: dts: hisilicon: Use generic "ngpios" rather than "snps,nr-gpios"
arm64: dts: hi3660: Harmonize DWC USB3 DT nodes name
arm64: dts: hisilicon: list all clocks required by snps-dw-apb-uart.yaml
arm64: dts: hisilicon: list all clocks required by pl011.yaml
arm64: dts: hisilicon: list all clocks required by spi-pl022.yaml
arm64: dts: hisilicon: normalize the node name of the UART devices
arm64: dts: hisilicon: normalize the node name of the usb devices
arm64: dts: hisilicon: normalize the node name of the SMMU devices
arm64: dts: hisilicon: place clock-names "biu" before "ciu"
arm64: dts: hisilicon: remove unused property pinctrl-names
arm64: dts: hisilicon: write the values of property-units into a uint32 array
arm64: dts: hisilicon: separate each group of data in the property "reg"
arm64: dts: hisilicon: normalize the node name of the ITS devices
Link: https://lore.kernel.org/r/5FBDC416.5060008@hisilicon.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This contains a couple of fixes to device trees. Among other things,
this restores suspend/resume on Jetson TX2 and makes USB OTG work on
Jetson TX1.
-----BEGIN PGP SIGNATURE-----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=+GCH
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.10-arm64-dt-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes
arm64: tegra: Device tree fixes for v5.10-rc6
This contains a couple of fixes to device trees. Among other things,
this restores suspend/resume on Jetson TX2 and makes USB OTG work on
Jetson TX1.
* tag 'tegra-for-5.10-arm64-dt-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Fix Tegra234 VDK node names
arm64: tegra: Wrong AON HSP reg property size
arm64: tegra: Fix USB_VBUS_EN0 regulator on Jetson TX1
arm64: tegra: Correct the UART for Jetson Xavier NX
arm64: tegra: Disable the ACONNECT for Jetson TX2
Link: https://lore.kernel.org/r/20201125170306.1095734-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Fix SD dll reset issue by using proper macro
- Fix PM feature checking for Xilinx Versal SoC
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCX70VSQAKCRDKSWXLKUoM
ISZ+AJ9IkZ3rto9BOpbuSUu2mZSG12hSBACgnY0S3UCCZ4G4RLbGrFPzvGUKTuM=
=SwId
-----END PGP SIGNATURE-----
Merge tag 'zynqmp-soc-fixes-for-v5.10-rc6' of https://github.com/Xilinx/linux-xlnx into arm/fixes
arm64: soc: ZynqMP SoC fixes for v5.10-rc6
- Fix SD dll reset issue by using proper macro
- Fix PM feature checking for Xilinx Versal SoC
* tag 'zynqmp-soc-fixes-for-v5.10-rc6' of https://github.com/Xilinx/linux-xlnx: (337 commits)
firmware: xilinx: Use hash-table for api feature check
firmware: xilinx: Fix SD DLL node reset issue
Linux 5.10-rc4
kvm: mmu: fix is_tdp_mmu_check when the TDP MMU is not in use
afs: Fix afs_write_end() when called with copied == 0 [ver #3]
ocfs2: initialize ip_next_orphan
panic: don't dump stack twice on warn
hugetlbfs: fix anon huge page migration race
mm: memcontrol: fix missing wakeup polling thread
kernel/watchdog: fix watchdog_allowed_mask not used warning
reboot: fix overflow parsing reboot cpu number
Revert "kernel/reboot.c: convert simple_strtoul to kstrtoint"
compiler.h: fix barrier_data() on clang
mm/gup: use unpin_user_pages() in __gup_longterm_locked()
mm/slub: fix panic in slab_alloc_node()
mailmap: fix entry for Dmitry Baryshkov/Eremin-Solenikov
mm/vmscan: fix NR_ISOLATED_FILE corruption on 64-bit
mm/compaction: stop isolation if too many pages are isolated and we have pages to migrate
mm/compaction: count pages and stop correctly during page isolation
drm/nouveau/kms/nv50-: Use atomic encoder callbacks everywhere
...
Link: https://lore.kernel.org/r/fd5ab967-f3cf-95fb-7947-5477ff85f97e@monstr.eu
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use GIC_SPI rather than 0 in the specifiers for the two ARM GIC
interrupts used by IPA.
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20201126015457.6557-4-elder@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Use GIC_SPI rather than 0 in the specifiers for the two ARM GIC
interrupts used by IPA.
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20201126015457.6557-3-elder@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Recently we learned that Android and Windows firmware don't seem to
like using 3 as an iommu mask value for IPA. A simple fix was to
specify exactly the streams needed explicitly, rather than implying
a range with the mask. Make the same change for the SC7180 platform.
See also:
https://lore.kernel.org/linux-arm-msm/20201123052305.157686-1-bjorn.andersson@linaro.org/
Fixes: d82fade846 ("arm64: dts: qcom: sc7180: add IPA information")
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20201126015457.6557-2-elder@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
As per the HDA binding doc reorder {clock,reset}-names entries for
Tegra194. This also serves as a preparation for converting existing
binding doc to json-schema.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra AHCI dt-binding doc is converted from text based to yaml based.
dtbs_check valdiation strictly follows reset-names order specified
in yaml dt-binding.
Tegra124 thru Tegra210 has 3 resets sata, sata-oob and sata-cold.
Tegra186 has 2 resets sata and sata-cold.
This patch changes order of SATA resets to maintain proper resets
order for commonly available resets across Tegra124 thru Tegra186
for dtbs_check to pass.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This commit adds "interrupts" property to Tegra210/Tegra186/Tegra194
XUSB PADCTL node. XUSB PADCTL interrupt will be raised when USB wake
event happens. This is required for supporting XUSB host controller
ELPG.
Signed-off-by: JC Kuo <jckuo@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The trogdor design has two options for supplying the 'pp3300_hub' power
rail, it can be supplied by 'pp3300_l7c' or 'pp3300_a'. The 'pp3300_a'
path includes a load switch that can be controlled through GPIO84.
Initially trogdor boards used 'pp3300_l7c' to power the USB hub, newer
revisions (will) use 'pp3300_a' as supply for 'pp3300_hub'.
Add a DT node for the 'pp3300_a' path and a pinctrl entry for the GPIO.
Make this path the default and keep trogdor rev1, lazor rev0 and rev1
on 'pp3300_l7c'. These earlier revisions also allocated the GPIO to the
purpose of controlling the power switch, so there is no need to limit
the pinctrl config to newer revisions. Remove the platform-wide
'always/boot-on' properties from 'pp3300_l7c' and add them to the
boards that use this supply. Also delete the 'always/boot-on'
properties of 'pp3300_hub' for these boards.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20201124164714.v4.1.I0ed4abdd2b2916fbedf76be254bc3457fb8b9655@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add ARCH_BCM4908 config that can be used for compiling DTS files.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
They don't descibe hardware fully yet but it's enough to boot a system.
Some missing blocks:
1. PMC (Power Management Controller?)
2. Ethernet
3. Crypto
4. Thermal
Asus DTS is missing defining full NAND partitions layout and buttons.
Further changes will fill those gaps as soon as required bindings will
be found / tested / added.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
With the recent feature added to enable perf events to use pseudo NMIs
as interrupts on platforms which support GICv3 or later, its now been
possible to enable hard lockup detector (or NMI watchdog) on arm64
platforms. So enable corresponding support.
One thing to note here is that normally lockup detector is initialized
just after the early initcalls but PMU on arm64 comes up much later as
device_initcall(). So we need to re-initialize lockup detection once
PMU has been initialized.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Acked-by: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/1602060704-10921-1-git-send-email-sumit.garg@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
DMA device nodes should follow regex pattern of "^dma-controller(@.*)?$".
This is a preparatory patch to use YAML doc format for ADMA.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
For some reason this was never hooked up. Do it now so that over-current
interrupts can be logged.
Reported-by: Nicolas Chauvet <kwizart@gmail.com>
Suggested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
According to dmesg, thermal-zones for mem and cpu are missing hot
temperatures properties.
throttrip: pll: missing hot temperature
...
throttrip: mem: missing hot temperature
...
Adding them will clear the messages.
Signed-off-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
On Jetson TX1 the following message can be seen:
tegra_soctherm 700e2000.thermal-sensor: throttle-cfg: heavy: no throt prop or invalid prop
This patch will fix the invalid prop issue according to the binding.
Signed-off-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
According to dmesg, thermal-zones for mem and cpu are missing hot
temperatures properties.
throttrip: pll: missing hot temperature
...
throttrip: mem: missing hot temperature
...
Adding them will clear the messages.
Signed-off-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Fix the device-tree entry that represents I/O High Voltage property
by replacing 'nvidia,io-high-voltage' with 'nvidia,io-hv' as the former
entry is deprecated.
Fixes: dbb72e2c30 ("arm64: tegra: Add configuration for PCIe C5 sideband signals")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
GIC400 has full support for virtualization, and yet the tegra186
DT doesn't expose the GICH/GICV regions (despite exposing the
maintenance interrupt that only makes sense for virtualization).
Add the missing regions, based on the hunch that the HW doesn't
use the CPU build-in interfaces, but instead the external ones
provided by the GIC. KVM's virtual GIC now works with this change.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the description of CPU PMUs for both the Denver and A57 clusters,
which enables the perf subsystem.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
When the device-tree board file was added for the Tegra234 VDK simulator
it incorrectly used the names 'cbb' and 'sdhci' instead of 'bus' and
'mmc', respectively. The names 'bus' and 'mmc' are required by the
device-tree json-schema validation tools. Therefore, fix this by
renaming these nodes accordingly.
Fixes: 639448912b ("arm64: tegra: Initial Tegra234 VDK support")
Reported-by: Ashish Singhal <ashishsingha@nvidia.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The AON HSP node's "reg" property size 0xa0000 will overlap with other
resources. This patch fixes that wrong value with correct size 0x90000.
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Dipen Patel <dipenp@nvidia.com>
Fixes: a38570c22e ("arm64: tegra: Add nodes for TCU on Tegra194")
Signed-off-by: Thierry Reding <treding@nvidia.com>
USB host mode is broken on the OTG port of Jetson TX1 platform because
the USB_VBUS_EN0 regulator (regulator@11) is being overwritten by the
vdd-cam-1v2 regulator. This commit rearranges USB_VBUS_EN0 to be
regulator@14.
Fixes: 257c8047be ("arm64: tegra: jetson-tx1: Add camera supplies")
Cc: stable@vger.kernel.org
Signed-off-by: JC Kuo <jckuo@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Jetson Xavier NX board routes UARTA to the 40-pin header and UARTC
to a 12-pin debug header. The UARTs can be used by either the Tegra
Combined UART (TCU) driver or the Tegra 8250 driver. By default, the
TCU will use UARTC on Jetson Xavier NX. Currently, device-tree for
Xavier NX enables the TCU and the Tegra 8250 node for UARTC. Fix this
by disabling the Tegra 8250 node for UARTC and enabling the Tegra 8250
node for UARTA.
Fixes: 3f9efbbe57 ("arm64: tegra: Add support for Jetson Xavier NX")
Cc: stable@vger.kernel.org
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Commit ff4c371d2b ("arm64: defconfig: Build ADMA and ACONNECT driver")
enable the Tegra ADMA and ACONNECT drivers and this is causing resume
from system suspend to fail on Jetson TX2. Resume is failing because the
ACONNECT driver is being resumed before the BPMP driver, and the ACONNECT
driver is attempting to power on a power-domain that is provided by the
BPMP. While a proper fix for the resume sequencing problem is identified,
disable the ACONNECT for Jetson TX2 temporarily to avoid breaking system
suspend.
Please note that ACONNECT driver is used by the Audio Processing Engine
(APE) on Tegra, but because there is no mainline support for APE on
Jetson TX2 currently, disabling the ACONNECT does not disable any useful
feature at the moment.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
DT schema is checking tuples which should be properly separated. The patch
is doing this separation to avoid the following warning:
..yaml: axi: pcie@fd0e0000:ranges: [[33554432, 0, 3758096384, 0,
3758096384, 0, 268435456, 1124073472, 6, 0, 6, 0, 2, 0]] is not valid under
any of the given schemas (Possible causes of the failure):
...dt.yaml: axi: pcie@fd0e0000:ranges: True was expected
...dt.yaml: axi: pcie@fd0e0000:ranges:0: [33554432, 0, 3758096384, 0,
3758096384, 0, 268435456, 1124073472, 6, 0, 6, 0, 2, 0] is too long
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/f59a63d8cb941592de6d2dee8afa6f120b2e40c8.1601379794.git.michal.simek@xilinx.com
The reason for this change is that after change from amba to axi U-Boot
started to show error like:
Unable to update property /axi/ethernet@ff0e0000:mac-address, err=FDT_ERR_NOTFOUND
Unable to update property /axi/ethernet@ff0e0000:local-mac-address, err=FDT_ERR_NOTFOUND
The reason is implementation in fdt_nodename_eq_() which is taken from dtc
to the kernel and to the U-Boot. Especially DTC commit d2a9da045897 ("libfdt:
Make unit address optional for finding nodes") which is in DTC from 2007.
The part of commit description is
" This is contrary to traditional OF-like finddevice() behaviour, which
allows the unit address to be omitted (which is useful when the device
name is unambiguous without the address)."
The kernel commit dfff9066e6 ("arm64: dts: zynqmp: Rename buses to be
align with simple-bus yaml") changed amba-apu/amba to axi@0/axi but
fdt_nodename_eq_() detects /axi/ as match for /axi@0/ because of commit
above.
That's why it easier to fix one DT inside the kernel by moving GIC node
from own bus to generic axi bus as is done by others SoCs. This will avoid
incorrect match because the unit address is omitted.
Reported-by: Paul Thomas <pthomas8589@gmail.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/f767fe007e446a2299fda9905e75b723c650a424.1605021644.git.michal.simek@xilinx.com
The PON block in the PMIC provides, among other things, support for
"reboot reason", power key and reset "key" handling. Let's enable the
driver for this block.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20201125023831.99774-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add DDR/L3 bandwidth votes for the pro variant of SC7180 SoC, as it support
frequencies upto 2.5 GHz.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/1606198876-3515-2-git-send-email-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tweak the DDR/L3 bandwidth votes on the lite variant of the SC7180 SoC
since the gold cores only support frequencies upto 2.1 GHz.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/1606198876-3515-1-git-send-email-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Trogdor has a thermistor to monitor the temperature of the charger IC.
Add the ADC (monitor) nodes and a thermal zone for this thermistor.
Signed-off-by: Antony Wang <antony_wang@compal.corp-partner.google.com>
[mka: tweaked commit message]
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20201030084840.1.If389f211a8532b83095ff8c66ec181424440f8d6@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add ADC_TM peripheral definitions for PM6150 and PM6150L. Add
ADC peripheral definition for PM6150l, which is needed for ADC_TM.
Signed-off-by: Jishnu Prakash <jprakash@codeaurora.org>
Link: https://lore.kernel.org/r/1602160825-10414-2-git-send-email-jprakash@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The Android and Windows firmware does not accept the use of 3 as a mask
to cover the IPA streams. But with 0x721 being related to WiFi and 0x723
being unsed the mapping can be reduced to just cover 0x720 and 0x722,
which is accepted.
Acked-by: Alex Elder <elder@linaro.org>
Tested-by: Alex Elder <elder@linaro.org>
Fixes: e9e89c45bf ("arm64: dts: sdm845: add IPA iommus property")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20201123052305.157686-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
We call arch_cpu_idle() with RCU disabled, but then use
local_irq_{en,dis}able(), which invokes tracing, which relies on RCU.
Switch all arch_cpu_idle() implementations to use
raw_local_irq_{en,dis}able() and carefully manage the
lockdep,rcu,tracing state like we do in entry.
(XXX: we really should change arch_cpu_idle() to not return with
interrupts enabled)
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lkml.kernel.org/r/20201120114925.594122626@infradead.org
Point the various remoteprocs of SM8150 MTP to a place with the platform
specific firmware.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20201121055603.582281-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The SMMU that sits in front of the QUP needs to be programmed properly
so that the i2c geni driver can allocate DMA descriptors. Failure to do
this leads to faults when using devices such as an i2c touchscreen where
the transaction is larger than 32 bytes and we use a DMA buffer.
arm-smmu 15000000.iommu: Unexpected global fault, this could be serious
arm-smmu 15000000.iommu: GFSR 0x00000002, GFSYNR0 0x00000002, GFSYNR1 0x000006c0, GFSYNR2 0x00000000
Add the right SID and mask so this works.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Tested-by: Caleb Connolly <caleb@connolly.tech>
Tested-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
[bjorn: Define for second QUP as well, be more specific in sdm845.dtsi]
Link: https://lore.kernel.org/r/20201122034149.626045-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This is to remove similar errors as below:
OF: /.../gpio-port@0: could not find phandle
Commit 7569486d79 ("gpio: dwapb: Add ngpios DT-property support")
explained the reason of above errors well and added the generic
"ngpios" property, let's use it.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
In accordance with the DWC USB3 bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly
named.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
The snps,dw-apb-uart binding need to specify two clocks: "baudclk",
"apb_pclk". But only "apb_pclk" is specified now. Because the driver
preferentially matches the first clock. Otherwise, it matches the second
clock instead of both clocks. So both of them use the same clock don't
change the function.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
The arm,pl011 binding need to specify two clocks: "uartclk", "apb_pclk".
But only "apb_pclk" is specified now. Because the driver preferentially
matches the first clock. Otherwise, it matches the second clock instead
of both clocks. So both of them use the same clock don't change the
function.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
The arm,pl022 binding need to specify two clocks: "sspclk", "apb_pclk".
But only "apb_pclk" is specified now. Because the driver preferentially
matches the first clock. Otherwise, it matches the second clock instead
of both clocks. So both of them use the same clock don't change the
function.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Change the node name of the UART devices to match
"^serial(@[0-9a-f,]+)*$".
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Change the node name of the usb devices to match "^usb(@.*)?". These errors
are detected by generic-ehci.yaml and generic-ohci.yaml.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Change the node name of the SMMU devices to match "^iommu@[0-9a-f]*".
Otherwise, the errors similar to the following will be reported by
arm,smmu-v3.yaml.
smmu_pcie: $nodename:0: 'smmu_pcie' does not match '^iommu@[0-9a-f]*'
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Look at the clock-names schema defined in synopsys-dw-mshc.yaml:
clock-names:
items:
- const: biu
- const: ciu
The "biu" needs to be placed before the "ciu".
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
uart1 and uart5 are not used as pinctrl, so the property "pinctrl-names"
can be deleted. In fact, the property "pinctrl-names" depends on the
property "pinctrl-0". So the errors similar to the following will be
reported by pinctrl-consumer.yaml.
serial@fdf00000: 'pinctrl-0' is a dependency of 'pinctrl-names'
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Use <> to separate the values of property-units will be treated as
multiple arrays. The errors similar to the following will be reported by
property-units.yaml.
ufs@ff3c0000: freq-table-hz: [[0, 0], [0, 0]] is too long
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Do not write the "reg" of multiple groups of data into a uint32 array,
use <> to separate them. Otherwise, the errors similar to the following
will be reported by reg.yaml.
soc: dsa@c7000000:reg:0: [0, 3305111552, 0, 8978432, 0, 3338665984, 0, \
6291456] is too long
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Change the node name of the ITS devices to match
"^(msi-controller|gic-its|interrupt-controller)@[0-9a-f]+$". Although
"interrupt-controller" is allowed, but "msi-controller" is preferred.
Otherwise, "interrupt-controller@b7000000: False schema does not allow"
will be reported by arm,gic-v3.yaml.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
The uart2 node has been renamed, apply the change to sm8250-hdk dts too so
that serial output works.
Fixes: 91ed0e90fc ("arm64: dts: qcom: add sm8250 hdk dts")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20201123143538.14198-1-jonathan@marek.ca
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
all ordering, a fix to make the Odroig Go Advance actually power down
and using the correct clock name on the NanoPi R2S.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAl+6aAkQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgZ6aB/4zVEcf7LYe6RMdV8DCaDHSPK2V8uYOifu/
Z8BaCJujiED249NI0NzvbZqrcuSjssxOSi4Y4kNCytPODs1+4wLVgG0f2xC2k38X
o0ofroN68lueSdhw4PZ9216w9scZpo/POLC7LLWR6kzlKGKv5Bj4w9UAq6cqqSMk
9FCwSyCxKm3yuYaWz/iJLJfC1oWRZ6qMvzjtXfdDT8bMFhLUZh9UOoWGeJP7CPIQ
nGu1WWVXWsda4UN7hwirGkApp65yK8asubekznBb2vw9Rr2A3bBuCqDdyOOOim3E
qxeLLGiObNfM6t0m5Pp+PfWPwqyn864LGUBBQ3b5zz7l2wjMh5i8
=/LkX
-----END PGP SIGNATURE-----
Merge tag 'v5.10-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
Fixed ordering for MMC devices on rk3399, due to a mmc change jumbling
all ordering, a fix to make the Odroig Go Advance actually power down
and using the correct clock name on the NanoPi R2S.
* tag 'v5.10-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Reorder LED triggers from mmc devices on rk3399-roc-pc.
arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards.
arm64: dts: rockchip: Remove system-power-controller from pmic on Odroid Go Advance
arm64: dts: rockchip: fix NanoPi R2S GMAC clock name
Link: https://lore.kernel.org/r/11641389.O9o76ZdvQC@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
With hardware dirty bit management, calling pte_wrprotect() on a writable,
dirty PTE will lose the dirty state and return a read-only, clean entry.
Move the logic from ptep_set_wrprotect() into pte_wrprotect() to ensure that
the dirty bit is preserved for writable entries, as this is required for
soft-dirty bit management if we enable it in the future.
Cc: <stable@vger.kernel.org>
Fixes: 2f4b829c62 ("arm64: Add support for hardware updates of the access and dirty pte bits")
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20201120143557.6715-3-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
pte_accessible() is used by ptep_clear_flush() to figure out whether TLB
invalidation is necessary when unmapping pages for reclaim. Although our
implementation is correct according to the architecture, returning true
only for valid, young ptes in the absence of racing page-table
modifications, this is in fact flawed due to lazy invalidation of old
ptes in ptep_clear_flush_young() where we elide the expensive DSB
instruction for completing the TLB invalidation.
Rather than penalise the aging path, adjust pte_accessible() to return
true for any valid pte, even if the access flag is cleared.
Cc: <stable@vger.kernel.org>
Fixes: 76c714be0e ("arm64: pgtable: implement pte_accessible()")
Reported-by: Yu Zhao <yuzhao@google.com>
Acked-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20201120143557.6715-2-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
- Touch screen and OV5640 camera support for the iWave RainboW Qseven
board (G21D), and its camera expansion board,
- Support for the AISTARVISION MIPI Adapter V2.1 board connected to
HiHope RZ/G2 boards,
- SPI (MSIOF) support for the R-Car M3-W+ SoC,
- Digital Radio Interface (DRIF) support for the R-Car M3-N SoC,
- Initial support for the R-Car M3-W+ ULCB/Kingfisher board combo,
- Minor fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCX66VTQAKCRCKwlD9ZEnx
cFhnAP9W9Jp5o/gp9JQ+Y2Js3xMDD9JngTYRQ+9x4qu2HTf0AAEAjfSzb0T2ub/x
HaW5LisNk1LZNp09+9ugw/nNZxp45AQ=
=QdJ8
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-dt-for-v5.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v5.11
- Touch screen and OV5640 camera support for the iWave RainboW Qseven
board (G21D), and its camera expansion board,
- Support for the AISTARVISION MIPI Adapter V2.1 board connected to
HiHope RZ/G2 boards,
- SPI (MSIOF) support for the R-Car M3-W+ SoC,
- Digital Radio Interface (DRIF) support for the R-Car M3-N SoC,
- Initial support for the R-Car M3-W+ ULCB/Kingfisher board combo,
- Minor fixes and improvements.
* tag 'renesas-arm-dt-for-v5.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: hihope-rev4: Add a comment explaining switch SW2404
arm64: dts: renesas: r8a77961: ulcb-kf: Initial device tree
arm64: dts: renesas: r8a77961: Add CAN{0,1} placeholder nodes
arm64: dts: renesas: beacon-renesom-baseboard: Move connector node out of hd3ss3220 device
arm64: dts: renesas: cat874: Move connector node out of hd3ss3220 device
arm64: dts: renesas: rzg2: Convert EtherAVB to explicit delay handling
arm64: dts: renesas: rcar-gen3: Convert EtherAVB to explicit delay handling
arm64: dts: renesas: r8a77965: Add DRIF support
arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2N
arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2M
arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2H
arm64: dts: renesas: aistarvision-mipi-adapter-2.1: Add parent macro for each sensor
arm64: dts: renesas: cat875: Remove rxc-skew-ps from ethernet-phy node
arm64: dts: renesas: hihope-rzg2-ex: Drop rxc-skew-ps from ethernet-phy node
ARM: dts: r8a7742-iwg21d-q7-dbcm-ca: Enable VIN instances
arm64: dts: renesas: r8a77961: Add MSIOF nodes
arm64: dts: renesas: Align GPIO hog names with dtschema
ARM: dts: r8a7742-iwg21d-q7: Add LCD support
Link: https://lore.kernel.org/r/20201113150854.3923885-3-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Enable support for the new R-Car V3U SoC in the arm64 defconfig,
- Refresh shmobile_defconfig for v5.10-rc1.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCX66RqgAKCRCKwlD9ZEnx
cLC5AP493HI4gYGzpdkwikaOR6sMM5iwI0v3n1AYcuw79Ep11gEAyEg0DpLMAOG8
aHDYqSv6Zo10pYjbHBJRwYRrOJMarw4=
=eio1
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v5.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig
Renesas ARM defconfig updates for v5.11
- Enable support for the new R-Car V3U SoC in the arm64 defconfig,
- Refresh shmobile_defconfig for v5.10-rc1.
* tag 'renesas-arm-defconfig-for-v5.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable R8A779A0 SoC
ARM: shmobile: defconfig: Refresh for v5.10-rc1
Link: https://lore.kernel.org/r/20201113150854.3923885-2-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Adding <asm/exception.h> brought in <asm/kprobes.h> which uses
<asm/probes.h>, which uses 'pstate_check_t' so the latter needs to
#include <asm/insn.h> for this typedef.
Fixes this build error:
In file included from arch/arm64/include/asm/kprobes.h:24,
from arch/arm64/include/asm/exception.h:11,
from arch/arm64/kernel/fpsimd.c:35:
arch/arm64/include/asm/probes.h:16:2: error: unknown type name 'pstate_check_t'
16 | pstate_check_t *pstate_cc;
Fixes: c6b90d5cf6 ("arm64/fpsimd: Fix missing-prototypes in fpsimd.c")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Tian Tao <tiantao6@hisilicon.com>
Link: https://lore.kernel.org/r/20201123044510.9942-1-rdunlap@infradead.org
Signed-off-by: Will Deacon <will@kernel.org>
irq_cpustat_t is exactly the same as the asm-generic one. Define
ack_bad_irq so the generic header does not emit the generic version of it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201113141733.392015387@linutronix.de
Commit 22337b9102 ("arm64: dts: qcom: sc7180: Changed polling mode
in Thermal-zones node") sets both 'polling-delay' and
'polling-delay-passive' to zero with the rationale that TSENS interrupts
are enabled. A TSENS interrupt fires when the temperature of a thermal
zone reaches a trip point, which makes regular polling below the passive
trip point temperature unnecessary. However the situation is different
when passive cooling is active, regular polling is still needed to
trigger a periodic evaluation of the thermal zone by the thermal governor.
Change 'polling-delay-passive' back to the original value of 250 ms.
Commit 2315ae70af ("arm64: dts: qcom: sc7180: Add gpu cooling
support") recently changed the value for the GPU thermal zones from
zero to 100 ms, also set it to 250 ms for uniformity. If some zones
really need different values these can be changed in dedicated patches.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Fixes: 22337b9102 ("arm64: dts: qcom: sc7180: Changed polling mode in Thermal-zones node")
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20201111120334.1.Ifc04ea235c3c370e3b21ec3b4d5dead83cc403b4@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Some versions of the firmware leave i2c gpios in a wrong state.
Add pinctrl that disables pin bias since external pull-up resistors
are present.
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Fixes: 1329c1ab07 ("arm64: dts: qcom: Add device tree for Samsung Galaxy A3U/A5U")
Signed-off-by: Nikita Travkin <nikitos.tr@gmail.com>
Link: https://lore.kernel.org/r/20201113175917.189123-6-nikitos.tr@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
L8150 uses aw2013 LED contriller for notification LED on the front
of the device. Add it to the device tree
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Nikita Travkin <nikitos.tr@gmail.com>
Link: https://lore.kernel.org/r/20201113175917.189123-5-nikitos.tr@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
L8150 uses SGM3785 Flash LED driver. It is similar to SGM3140 but
can also be controlled with PWM. Since SoC doesn't have PWM, add
led to the device tree using sgm3140 driver.
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Nikita Travkin <nikitos.tr@gmail.com>
Link: https://lore.kernel.org/r/20201113175917.189123-4-nikitos.tr@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
L8150 has RMI4 compatible Synaptics touchscreen on
blsp_i2c5. It is powered by fixed regulator. Add
both to the device tree.
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Nikita Travkin <nikitos.tr@gmail.com>
Link: https://lore.kernel.org/r/20201113175917.189123-2-nikitos.tr@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
L8150 has a vibrator connected to PM8916. Add it to the device tree.
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Nikita Travkin <nikitos.tr@gmail.com>
Link: https://lore.kernel.org/r/20201113175917.189123-1-nikitos.tr@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This patch wires up touchscreen support on Samsung Galaxy A3 2015.
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Michael Srba <Michael.Srba@seznam.cz>
Link: https://lore.kernel.org/r/20201115195058.27097-1-michael.srba@seznam.cz
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
There's a proximity sensor on Lazor devices, but only for LTE SKUs.
Enable it only on the Lazor LTE SKUs and also configure it properly so
it works.
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20201120183825.547310-1-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This interrupt has an external pull-up so we don't need to pull it up
again. Drop the internal pull here. Note I don't think this really
changes anything, just noticed while looking at this irq pin.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20201120200913.618274-1-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
RB5 makes use of the two USB controllers onboard. USB0 is connected
to the Type C port and USB1 is connected to USB3.1 HUB which exposes
following downstream ports:
* 2 Type A ports
* 2 HS/SS ports on the expansion connector
* USB to LAN device
Hence, enable these two controllers with the required PHYs.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200917082622.6823-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
RNG (Random Number Generator) in SM8250 features PRNG EE (Execution
Environment), hence add devicetree support for it.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200921065806.10928-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Qualcomm boards should define two compatible strings: one for board,
anoter one for SoC family. sm8250-mtp.dts lists just the board
compatible, which makes it incompatible with qcom.yaml schema.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: 60378f1a17 ("arm64: dts: qcom: sm8250: Add sm8250 dts file")
Link: https://lore.kernel.org/r/20200930112133.2091505-1-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add support for uSD card on RB5 using the SDHC2 interface.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[DB: disabled 1.8V support to get SDHC to work]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20201028190955.1264526-2-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add support for SDC2 which can be used to interface uSD card.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[DB: minor fixes: clocks, iommus, opps]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20201028190955.1264526-1-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add initial HDK865 dts, based on sm8250-mtp, with a few changes.
Notably, regulator configs are changed a bit.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20200609194030.17756-9-jonathan@marek.ca
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
To enable seccomp constant action bitmaps, we need to have a static
mapping to the audit architecture and system call table size. Add these
for arm64.
Signed-off-by: Kees Cook <keescook@chromium.org>
We recently introduced a 1 GB sized ZONE_DMA to cater for platforms
incorporating masters that can address less than 32 bits of DMA, in
particular the Raspberry Pi 4, which has 4 or 8 GB of DRAM, but has
peripherals that can only address up to 1 GB (and its PCIe host
bridge can only access the bottom 3 GB)
Instructing the DMA layer about these limitations is straight-forward,
even though we had to fix some issues regarding memory limits set in
the IORT for named components, and regarding the handling of ACPI _DMA
methods. However, the DMA layer also needs to be able to allocate
memory that is guaranteed to meet those DMA constraints, for bounce
buffering as well as allocating the backing for consistent mappings.
This is why the 1 GB ZONE_DMA was introduced recently. Unfortunately,
it turns out the having a 1 GB ZONE_DMA as well as a ZONE_DMA32 causes
problems with kdump, and potentially in other places where allocations
cannot cross zone boundaries. Therefore, we should avoid having two
separate DMA zones when possible.
So let's do an early scan of the IORT, and only create the ZONE_DMA
if we encounter any devices that need it. This puts the burden on
the firmware to describe such limitations in the IORT, which may be
redundant (and less precise) if _DMA methods are also being provided.
However, it should be noted that this situation is highly unusual for
arm64 ACPI machines. Also, the DMA subsystem still gives precedence to
the _DMA method if implemented, and so we will not lose the ability to
perform streaming DMA outside the ZONE_DMA if the _DMA method permits
it.
[nsaenz: unified implementation with DT's counterpart]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Cc: Jeremy Linton <jeremy.linton@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20201119175400.9995-7-nsaenzjulienne@suse.de
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
We recently introduced a 1 GB sized ZONE_DMA to cater for platforms
incorporating masters that can address less than 32 bits of DMA, in
particular the Raspberry Pi 4, which has 4 or 8 GB of DRAM, but has
peripherals that can only address up to 1 GB (and its PCIe host
bridge can only access the bottom 3 GB)
The DMA layer also needs to be able to allocate memory that is
guaranteed to meet those DMA constraints, for bounce buffering as well
as allocating the backing for consistent mappings. This is why the 1 GB
ZONE_DMA was introduced recently. Unfortunately, it turns out the having
a 1 GB ZONE_DMA as well as a ZONE_DMA32 causes problems with kdump, and
potentially in other places where allocations cannot cross zone
boundaries. Therefore, we should avoid having two separate DMA zones
when possible.
So, with the help of of_dma_get_max_cpu_address() get the topmost
physical address accessible to all DMA masters in system and use that
information to fine-tune ZONE_DMA's size. In the absence of addressing
limited masters ZONE_DMA will span the whole 32-bit address space,
otherwise, in the case of the Raspberry Pi 4 it'll only span the 30-bit
address space, and have ZONE_DMA32 cover the rest of the 32-bit address
space.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20201119175400.9995-6-nsaenzjulienne@suse.de
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
zone_dma_bits's initialization happens earlier that it's actually
needed, in arm64_memblock_init(). So move it into the more suitable
zone_sizes_init().
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Link: https://lore.kernel.org/r/20201119175400.9995-3-nsaenzjulienne@suse.de
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
crashkernel might reserve memory located in ZONE_DMA. We plan to delay
ZONE_DMA's initialization after unflattening the devicetree and ACPI's
boot table initialization, so move it later in the boot process.
Specifically into bootmem_init() since request_standard_resources()
depends on it.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Link: https://lore.kernel.org/r/20201119175400.9995-2-nsaenzjulienne@suse.de
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
mem_init() currently relies on knowing the boundaries of the crashkernel
reservation to map such region with page granularity for later
unmapping via set_memory_valid(..., 0). If the crashkernel reservation
is deferred, such boundaries are not known when the linear mapping is
created. Simply parse the command line for "crashkernel" and, if found,
create the linear map with NO_BLOCK_MAPPINGS.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Acked-by: James Morse <james.morse@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20201119175556.18681-1-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add the apps_smmu node for sm8250.
For UFS, now that the kernel initializes the iommu, the stream mappings
set by the bootloader are cleared. Adding the iommus property is required
so that new mappings are created for UFS.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20200609194030.17756-5-jonathan@marek.ca
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add the apps_smmu node for sm8150.
For UFS, now that the kernel initializes the iommu, the stream mappings
set by the bootloader are cleared. Adding the iommus property is required
so that new mappings are created for UFS.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Link: https://lore.kernel.org/r/20200609194030.17756-4-jonathan@marek.ca
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Currently <crypto/sha.h> contains declarations for both SHA-1 and SHA-2,
and <crypto/sha3.h> contains declarations for SHA-3.
This organization is inconsistent, but more importantly SHA-1 is no
longer considered to be cryptographically secure. So to the extent
possible, SHA-1 shouldn't be grouped together with any of the other SHA
versions, and usage of it should be phased out.
Therefore, split <crypto/sha.h> into two headers <crypto/sha1.h> and
<crypto/sha2.h>, and make everyone explicitly specify whether they want
the declarations for SHA-1, SHA-2, or both.
This avoids making the SHA-1 declarations visible to files that don't
want anything to do with SHA-1. It also prepares for potentially moving
sha1.h into a new insecure/ or dangerous/ directory.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of copying the calculated authentication tag to memory and
calling crypto_memneq() to verify it, use vector bytewise compare and
min across vector instructions to decide whether the tag is valid. This
is more efficient, and given that the tag is only transiently held in a
NEON register, it is also safer, given that calculated tags for failed
decryptions should be withheld.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, the kernel assumes that if RAM starts above 32-bit (or
zone_bits), there is still a ZONE_DMA/DMA32 at the bottom of the RAM and
such constrained devices have a hardwired DMA offset. In practice, we
haven't noticed any such hardware so let's assume that we can expand
ZONE_DMA32 to the available memory if no RAM below 4GB. Similarly,
ZONE_DMA is expanded to the 4GB limit if no RAM addressable by
zone_bits.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Cc: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Cc: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20201118185809.1078362-1-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The Qualcomm SCM driver was never explicitly enabled in the defconfig.
Instead it was (apparently) selected by DRM_MSM and by the recent change
to make it tristate now became =m.
Unfortunately this removes the ability for PINCTRL_MSM and ARM_SMMU to
be =y and with deferred_probe_timeout defaulting to 0 this means that
things such as UART, USB, PCIe and SDHCI probes with their dependencies
ignored.
The lack of pinctrl results in invalid pin configuration and the lack of
iommu results in the system locking up as soon as any form of data
transfer is attempted from any of the affected peripherals.
Mark QCOM_SCM as builtin, to avoid this.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20201118162528.454729-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Task scheduler behavior depends on frequency invariance (FI) support and
the resulting invariant load tracking signals. For example, in order to
make accurate predictions across CPUs for all performance states, Energy
Aware Scheduling (EAS) needs frequency-invariant load tracking signals
and therefore it has a direct dependency on FI. This dependency is known,
but EAS enablement is not yet conditioned on the presence of FI during
the built of the scheduling domain hierarchy.
Before this is done, the following must be considered: while
arch_scale_freq_invariant() will see changes in FI support and could
be used to condition the use of EAS, it could return different values
during system initialisation.
For arm64, such a scenario will happen for a system that does not support
cpufreq driven FI, but does support counter-driven FI. For such a system,
arch_scale_freq_invariant() will return false if called before counter
based FI initialisation, but change its status to true after it.
If EAS becomes explicitly dependent on FI this would affect the task
scheduler behavior which builds its scheduling domain hierarchy well
before the late counter-based FI init. During that process, EAS would be
disabled due to its dependency on FI.
Two points of future early calls to arch_scale_freq_invariant() which
would determine EAS enablement are:
- (1) drivers/base/arch_topology.c:126 <<update_topology_flags_workfn>>
rebuild_sched_domains();
This will happen after CPU capacity initialisation.
- (2) kernel/sched/cpufreq_schedutil.c:917 <<rebuild_sd_workfn>>
rebuild_sched_domains_energy();
-->rebuild_sched_domains();
This will happen during sched_cpufreq_governor_change() for the
schedutil cpufreq governor.
Therefore, before enforcing the presence of FI support for the use of EAS,
ensure the following: if there is a change in FI support status after
counter init, use the existing rebuild_sched_domains_energy() function to
trigger a rebuild of the scheduling and performance domains that in turn
will determine the enablement of EAS.
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lkml.kernel.org/r/20201027180713.7642-3-ionela.voinescu@arm.com
We don't need to check for MTE support before checking the flag
because it can only be set if the hardware supports MTE. As a result
we can unconditionally check the flag bit which is expected to be in
a register and therefore the check can be done in a single instruction
instead of first needing to load the hwcaps.
On a DragonBoard 845c with a kernel built with CONFIG_ARM64_MTE=y with
the powersave governor this reduces the cost of a kernel entry/exit
(invalid syscall) from 465.1ns to 463.8ns.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Link: https://linux-review.googlesource.com/id/If4dc3501fd4e4f287322f17805509613cfe47d24
Link: https://lore.kernel.org/r/20201118032051.1405907-1-pcc@google.com
[catalin.marinas@arm.com: remove IS_ENABLED(CONFIG_ARM64_MTE)]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This property is for consumers of io-channels. Here it is used in
providers of those channels.
Note dt-schema will currently flag this as an error due to a dependency
between this property and io-channels.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20201115192951.1073632-9-jic23@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
It was recently reported that if GICR_TYPER is accessed before the RD base
address is set, we'll suffer from the unset @rdreg dereferencing. Oops...
gpa_t last_rdist_typer = rdreg->base + GICR_TYPER +
(rdreg->free_index - 1) * KVM_VGIC_V3_REDIST_SIZE;
It's "expected" that users will access registers in the redistributor if
the RD has been properly configured (e.g., the RD base address is set). But
it hasn't yet been covered by the existing documentation.
Per discussion on the list [1], the reporting of the GICR_TYPER.Last bit
for userspace never actually worked. And it's difficult for us to emulate
it correctly given that userspace has the flexibility to access it any
time. Let's just drop the reporting of the Last bit for userspace for now
(userspace should have full knowledge about it anyway) and it at least
prevents kernel from panic ;-)
[1] https://lore.kernel.org/kvmarm/c20865a267e44d1e2c0d52ce4e012263@kernel.org/
Fixes: ba7b3f1275 ("KVM: arm/arm64: Revisit Redistributor TYPER last bit computation")
Reported-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20201117151629.1738-1-yuzenghui@huawei.com
Cc: stable@vger.kernel.org
When section mappings are enabled, we allocate vmemmap pages from
physically continuous memory of size PMD_SIZE using
vmemmap_alloc_block_buf(). Section mappings are good to reduce TLB
pressure. But when system is highly fragmented and memory blocks are
being hot-added at runtime, its possible that such physically continuous
memory allocations can fail. Rather than failing the memory hot-add
procedure, add a fallback option to allocate vmemmap pages from
discontinuous pages using vmemmap_populate_basepages().
Signed-off-by: Sudarshan Rajagopalan <sudaraja@codeaurora.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/d6c06f2ef39bbe6c715b2f6db76eb16155fdcee6.1602722808.git.sudaraja@codeaurora.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Even though support for EFI boot remains entirely optional for arm64,
it is unlikely that we will ever be able to repurpose the image header
fields that the EFI loader relies on, i.e., the magic NOP at offset
0x0 and the PE header address at offset 0x3c.
So let's factor out the differences into a 'efi_signature_nop' macro and
a local symbol representing the PE header address, and move the
conditional definitions into efi-header.S, taking into account whether
CONFIG_EFI is enabled or not. While at it, switch to a signature NOP
that behaves more like a NOP, i.e., one that only clobbers the
flags.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201117124729.12642-4-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
We no longer map the first 64 KB of the kernel image, as there is nothing
there that we ever need to refer back to once the kernel has booted. Even
though facilities like kallsyms are very careful to only refer to the
region that starts at _stext when mapping virtual addresses to symbol
names, let's avoid any confusion by switching to local .L prefixed symbol
names for the EFI header, as none of them have any significance to the
rest of the kernel.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201117124729.12642-3-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In a previous patch, we increased the size of the EFI PE/COFF header
to 64 KB, which resulted in the _stext symbol to appear at a fixed
offset of 64 KB into the image.
Since 64 KB is also the largest page size we support, this completely
removes the need to map the first 64 KB of the kernel image, given that
it only contains the arm64 Image header and the EFI header, neither of
which we ever access again after booting the kernel. More importantly,
we should avoid an executable mapping of non-executable and not entirely
predictable data, to deal with the unlikely event that we inadvertently
emitted something that looks like an opcode that could be used as a
gadget for speculative execution.
So let's limit the kernel mapping of .text to the [_stext, _etext)
region, which matches the view of generic code (such as kallsyms) when
it reasons about the boundaries of the kernel's .text section.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201117124729.12642-2-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add arm64 IMA arch support. The code and arch policy is mainly inherited
from x86.
Co-developed-by: Chester Lin <clin@suse.com>
Signed-off-by: Chester Lin <clin@suse.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The scripts/dtc/checks.c requires that the node have empty "dma-ranges"
property must have the same "#address-cells" and "#size-cells" values as
the parent node. Otherwise, the following warnings is reported:
arch/arm64/boot/dts/qcom/ipq6018.dtsi:185.3-14: Warning \
(dma_ranges_format): /soc:dma-ranges: empty "dma-ranges" property but \
its #address-cells (1) differs from / (2)
arch/arm64/boot/dts/qcom/ipq6018.dtsi:185.3-14: Warning \
(dma_ranges_format): /soc:dma-ranges: empty "dma-ranges" property but \
its #size-cells (1) differs from / (2)
Arnd Bergmann figured out why it's necessary:
Also note that the #address-cells=<1> means that any device under
this bus is assumed to only support 32-bit addressing, and DMA will
have to go through a slow swiotlb in the absence of an IOMMU.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20201016090833.1892-3-thunder.leizhen@huawei.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The scripts/dtc/checks.c requires that the node have empty "dma-ranges"
property must have the same "#address-cells" and "#size-cells" values as
the parent node. Otherwise, the following warnings is reported:
arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi:7.3-14: Warning \
(dma_ranges_format): /usb:dma-ranges: empty "dma-ranges" property but \
its #address-cells (1) differs from / (2)
arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi:7.3-14: Warning \
(dma_ranges_format): /usb:dma-ranges: empty "dma-ranges" property but \
its #size-cells (1) differs from / (2)
Arnd Bergmann figured out why it's necessary:
Also note that the #address-cells=<1> means that any device under
this bus is assumed to only support 32-bit addressing, and DMA will
have to go through a slow swiotlb in the absence of an IOMMU.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20201016090833.1892-2-thunder.leizhen@huawei.com'
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add the sub-mailbox nodes that are used to communicate between MPU and
various remote processors present in the J7200 SoCs to the J7200 common
processor board. These include the R5F remote processors in the dual-R5F
clusters in the MCU domain (MCU_R5FSS0) and the MAIN domain (MAIN_R5FSS0).
These sub-mailbox nodes utilize the System Mailbox clusters 0 and 1. All
the remaining mailbox clusters are currently not used on A72 core, and
so are disabled. The nodes are added in the k3-j7200-som-p0.dtsi file
to co-locate these alongside future reserved-memory nodes required for
remoteprocs.
The sub-mailbox nodes added match the hard-coded mailbox configuration
used within the TI RTOS IPC software packages. A sub-mailbox node is added
for each of the R5F cores to accommodate the R5F processor sub-systems
running in Split mode. Only the sub-mailbox node for the first R5F core in
each cluster is used in case of Lockstep mode for that R5F cluster.
NOTE:
The GIC_SPI interrupts to be used are dynamically allocated and managed
by the System Firmware through the ti-sci-intr irqchip driver. So, only
valid interrupts that are used by the sub-mailbox devices (each cluster's
User 0 IRQ output) are enabled. This is done to minimize the number of
NavSS Interrupt Router outputs utilized.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Link: https://lore.kernel.org/r/20201026232637.15681-4-s-anna@ti.com
The J7200 Main NavSS block contains a Mailbox IP instance with
multiple clusters, and follows the same integration style as on
J721E SoCs.
Add all the Mailbox clusters as their own nodes under the MAIN
NavSS interconnect node instead of creating an almost empty parent
node for the new K3 mailbox IP and the clusters as its child nodes.
All these nodes are enabled by default in the base dtsi file, but
any cluster that does not define any child sub-mailbox nodes
should be disabled in the corresponding board dts files.
NOTE:
The NavSS only has a limited number of interrupts, so none of the
interrupts generated by a Mailbox IP are added by default. Only
the needed interrupts that are targeted towards the A72 GIC will
have to be added later on in the board dts files alongside the
corresponding sub-mailbox child nodes.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Link: https://lore.kernel.org/r/20201026232637.15681-3-s-anna@ti.com
The Main NavSS block on J7200 SoCs contains a HwSpinlock IP instance that
is same as the IP on AM65x and J721E SoCs. Add the DT node for this on
J7200 SoCs. The node is present within the Main NavSS block, and is added
as a child node under the main_navss interconnect node.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Link: https://lore.kernel.org/r/20201026232637.15681-2-s-anna@ti.com
Follow the device tree standards that states to set the
status="reserved" if an device is operational, but used by a non-linux
firmware in the system.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Acked-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20201113211826.13087-6-nm@ti.com
The default state of a device tree node is "okay". There is no specific
use of explicitly adding status = "okay" in the board dts.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Cc: Roger Quadros <rogerq@ti.com>
Link: https://lore.kernel.org/r/20201113211826.13087-5-nm@ti.com
The default state of a device tree node is "okay". There is no specific
use of explicitly adding status = "okay" in the SoC dtsi.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Keerthy <j-keerthy@ti.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
Cc: Keerthy <j-keerthy@ti.com>
Link: https://lore.kernel.org/r/20201113211826.13087-4-nm@ti.com
The device tree standard states that when the status property is
not present under a node, the okay value is assumed. There are many
reasons for doing the same, the number of strings in the device
tree, default power management functionality, etc. are a few of the
reasons.
In general, after a few rounds of discussions [1] there are few
options one could take when dealing with SoC dtsi and board dts
a. SoC dtsi provide nodes as a super-set default (aka enabled) state and
to prevent messy board files, when more boards are added per SoC, we
optimize and disable commonly un-used nodes in board-common.dtsi
b. SoC dtsi disables all hardware dependent nodes by default and board
dts files enable nodes based on a need basis.
c. Subjectively pick and choose which nodes we will disable by default
in SoC dtsi and over the years we can optimize things and change
default state depending on the need.
While there are pros and cons on each of these approaches, the right
thing to do will be to stick with device tree default standards and
work within those established rules. So, we choose to go with option
(a).
Lets cleanup defaults of j721e SoC dtsi before this gets more harder
to cleanup later on and new SoCs are added.
The only functional difference between the dtb generated is
status='okay' is no longer necessary for mcasp10 and depends on the
default state.
NOTE: There is a known risk of omission that new board dts developers
might miss reviewing both the board schematics in addition to all the
DT nodes of the SoC when setting appropriate nodes status to disable
or reserved in the board dts. This can expose issues in drivers that
may not anticipate an incomplete node (example: missing appropriate
board properties) being in an "okay" state. These cases are considered
bugs and need to be fixed in the drivers as and when identified.
[1] https://lore.kernel.org/linux-arm-kernel/20201027130701.GE5639@atomide.com/
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20201113211826.13087-3-nm@ti.com
The device tree standard states that when the status property is
not present under a node, the okay value is assumed. There are many
reasons for doing the same, the number of strings in the device
tree, default power management functionality, etc. are a few of the
reasons.
In general, after a few rounds of discussions [1] there are few
options one could take when dealing with SoC dtsi and board dts
a. SoC dtsi provide nodes as a super-set default (aka enabled) state and
to prevent messy board files, when more boards are added per SoC, we
optimize and disable commonly un-used nodes in board-common.dtsi
b. SoC dtsi disables all hardware dependent nodes by default and board
dts files enable nodes based on a need basis.
c. Subjectively pick and choose which nodes we will disable by default
in SoC dtsi and over the years we can optimize things and change
default state depending on the need.
While there are pros and cons on each of these approaches, the right
thing to do will be to stick with device tree default standards and
work within those established rules. So, we choose to go with option
(a).
Lets cleanup defaults of am654 SoC dtsi before this gets more harder
to cleanup later on and new SoCs are added.
The dtb generated is identical with the patch and it is just cleanup to
ensure we have a clean usage model
NOTE: There is a known risk of omission that new board dts developers
might miss reviewing both the board schematics in addition to all the
DT nodes of the SoC when setting appropriate nodes status to disable
or reserved in the board dts. This can expose issues in drivers that
may not anticipate an incomplete node (example: missing appropriate
board properties) being in an "okay" state. These cases are considered
bugs and need to be fixed in the drivers as and when identified.
[1] https://lore.kernel.org/linux-arm-kernel/20201027130701.GE5639@atomide.com/
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20201113211826.13087-2-nm@ti.com
Around one third of the fixes this time are for dts files that list
their ethernet controller as using 'phy-mode="rgmii"' but are changed to
'phy-mode="rgmii-id"' now, because the PHY drivers (realtek, ksz9031,
dp83867, ...) now configure the internal delay based on that when they
used to stay on the hardware default.
The long story is archived at
https://lore.kernel.org/netdev/CAMj1kXEEF_Un-4NTaD5iUN0NoZYaJQn-rPediX0S6oRiuVuW-A@mail.gmail.com/
I was trying to hold off on the bugfixes until there was a solution that
would avoid breaking all boards, but that does not seem to be happening
any time soon, so I am now sending the correct version of the dts files to
ensure that at least these machines can use their network devices again.
The other changes this time are:
- Updating the MAINTAINER lists for Allwinner and Samsung SoCs
- Multiple i.MX8MN machines get updates for their CPU
operating points to match the data sheet
- A revert for a dts patch that caused a regression in USB
support on Odroid U3
- Two fixes for the AMD Tee driver, addressing a memory leak
and missing locking
- Mark the network subsystem on qoriq-fman3 as cache coherent
for correctness as better performance.
- Minor dts fixes elsewhere, addressing dtc warnings and similar
problems
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=Qgm/
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-fixes-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Around one third of the fixes this time are for dts files that list
their ethernet controller as using 'phy-mode="rgmii"' but are changed
to 'phy-mode="rgmii-id"' now, because the PHY drivers (realtek,
ksz9031, dp83867, ...) now configure the internal delay based on that
when they used to stay on the hardware default.
The long story is archived at
https://lore.kernel.org/netdev/CAMj1kXEEF_Un-4NTaD5iUN0NoZYaJQn-rPediX0S6oRiuVuW-A@mail.gmail.com/
I was trying to hold off on the bugfixes until there was a solution
that would avoid breaking all boards, but that does not seem to be
happening any time soon, so I am now sending the correct version of
the dts files to ensure that at least these machines can use their
network devices again.
The other changes this time are:
- Updating the MAINTAINER lists for Allwinner and Samsung SoCs
- Multiple i.MX8MN machines get updates for their CPU operating
points to match the data sheet
- A revert for a dts patch that caused a regression in USB support on
Odroid U3
- Two fixes for the AMD Tee driver, addressing a memory leak and
missing locking
- Mark the network subsystem on qoriq-fman3 as cache coherent for
correctness as better performance.
- Minor dts fixes elsewhere, addressing dtc warnings and similar
problems"
* tag 'arm-soc-fixes-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits)
ARM: dts: exynos: revert "add input clock to CMU in Exynos4412 Odroid"
ARM: dts: imx50-evk: Fix the chip select 1 IOMUX
arm64: dts: imx8mm: fix voltage for 1.6GHz CPU operating point
ARM: dts: stm32: Keep VDDA LDO1 always on on DHCOM
ARM: dts: stm32: Enable thermal sensor support on stm32mp15xx-dhcor
ARM: dts: stm32: Define VIO regulator supply on DHCOM
ARM: dts: stm32: Fix LED5 on STM32MP1 DHCOM PDK2
ARM: dts: stm32: Fix TA3-GPIO-C key on STM32MP1 DHCOM PDK2
arm64: dts: renesas: r8a774e1: Add missing audio_clk_b
tee: amdtee: synchronize access to shm list
tee: amdtee: fix memory leak due to reset of global shm list
arm64: dts: agilex/stratix10: Fix qspi node compatible
ARM: dts: imx6q-prti6q: fix PHY address
ARM: dts: vf610-zii-dev-rev-b: Fix MDIO over clocking
arm: dts: imx6qdl-udoo: fix rgmii phy-mode for ksz9031 phy
arm64: dts imx8mn: Remove non-existent USB OTG2
arm64: dts: imx8mm-beacon-som: Fix Choppy BT audio
arm64: dts: fsl: DPAA FMan DMA operations are coherent
arm64: dts: fsl: fix endianness issue of rcpm
arm64: dts: imx8mn-evk: fix missing PMIC's interrupt line pull-up
...
- Fix MDIO over clocking on vf610-zii-dev-rev-b board to get switch
device work reliably.
- Fix imx50-evk IOMUX for the chip select 1 to use GPIO4_13 instead of
the native CSPI_SSI function.
- Fix voltage for 1.6GHz CPU operating point on i.MX8MM to match
hardware datasheet.
- Fix phy-mode for KSZ9031 PHY on imx6qdl-udoo board.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl+yQKUUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7dVgf1GkIY1GbPIvkMZB3CiQZ0e40vUmWx
CW70bOrGAcSSgYvL7tBqb7I5U5+01m4whtsal6jK/TTZ4w2PAItZpgi3ZiXooyO9
3qGHr7IgcuCWzQ2Bjg+YGR1esGTi2+KKggCWog0R8ipy5gUCvIcuLNyBtxjlkbKt
1kkxEDOdmeXPAUQboEdRPZF4m6J/q8g/QgY8GeLsPeContEvAXBMMdNgIRHmWZ6H
iu3H33ogseBkm5RvSfdjmTKPnz9/5hF94yEpGgTkWrawq2bMXwt7loBsQl/TyUVg
d01gZl5yOxjtMXcnJ5bW+6SOpPbjUBFczg1+C2u2tDpeES5DjjYLS0fb
=zT+s
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-5.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.10, round 4:
- Fix MDIO over clocking on vf610-zii-dev-rev-b board to get switch
device work reliably.
- Fix imx50-evk IOMUX for the chip select 1 to use GPIO4_13 instead of
the native CSPI_SSI function.
- Fix voltage for 1.6GHz CPU operating point on i.MX8MM to match
hardware datasheet.
- Fix phy-mode for KSZ9031 PHY on imx6qdl-udoo board.
* tag 'imx-fixes-5.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx50-evk: Fix the chip select 1 IOMUX
arm64: dts: imx8mm: fix voltage for 1.6GHz CPU operating point
ARM: dts: vf610-zii-dev-rev-b: Fix MDIO over clocking
arm: dts: imx6qdl-udoo: fix rgmii phy-mode for ksz9031 phy
Link: https://lore.kernel.org/r/20201116090702.GM5849@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Eddie Cai