The length of the screen line is variable with the 3270 protocol.
For each attribute (foreground, background color, highlighting etc)
we need 3 bytes: the set attribute order, the attribute number, and
the value of the attribute. This means that depending on screen content,
we might end up 3*3 bytes addtional data for a single character.
Allocating the maximum possible amount of memory is quite a lot, and
we cannot easily extend the lines by allocating memory because we
might get called from atomic context. Failing to extend the memory
would also be bad as that would mean that we could miss kernel messages
in oom conditions. Therefore move the conversion to a 3270 datastream
to tty3270_update(), and use only single line buffer.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Updating the status line is almost the same as generating
it when redrawing the screen. However, the code is much easier
to read when doing so.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
There are lots of places adding attributes or orders to the datastream.
Add a few helpers to make that code shorter and easier to read.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Instead of always converting the character set, only convert them
when the line is really displayed.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
To make the upcoming patches easier to read, move tty3270_convert_line()
before changing code. No functional change.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
All callers of raw3270_buffer_address() are calculating the offset
from some x/y coordinates. Move that calculation inside of the
function, so user can pass the x/y values directly. Note that
negative values are relative to the end-of-line or end-of-screen.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
No functional change (except more memory consumption), in preparation
for the line buffer rework.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
There a quite a few places using 'tp->view.rows - 2'.
Add a helper function for this. This will also be used
when a function key help line will be added.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
To make the code easier to read, split up tty3270_convertline()
into several subfunctions:
- tty3270_resize_line() to realloc the line if it doesn't have enough
space left
- tty3270_required_length() to calculate how much space we need
- tty3270_add_attributes() to add the color and highlight attributes
- tty3270_add_reset_attributes() to reset the attributes at the end of
the line
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
There's no easy way to figure out whether the user has re-connected
to the z/VM session. When the user re-connected with a different geometry
to z/VM, the screen layout is broken. Allow the user to force a resizing
by pressing the Clear Key.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
This change was initially made to reduce code duplication when the
con3270 and tty3270 shared the same resize code. It still makes sense
to move the resize workqueue to raw3270 in case we add some other view
later.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
There are a few places (and there would be more with the following commits)
like this:
raw3270_request_reset(cp->kreset);
raw3270_request_set_cmd(cp->kreset, TC_WRITE);
raw3270_request_add_data(cp->kreset, &kreset_data, 1);
raw3270_start(&cp->view, cp->kreset);
i.e reset a request, setting the command, adding payload, and starting the
request. Add a helper raw3270_start_request() which takes a command and
the payload as argument and calls the approppriate functions.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Use AID_* instead of hex numbers to make the code a bit
easier to read. also convert the if/else blocks to a
switch statement in tty3270_read_tasklet().
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
With 'TERM=vt220' zsh is sending several NUL characters with
the prompt to the tty. Both xterm and the linux drm console
seem to ignore them. Ignore them in tty3270 as well.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Add support for ESC(B and ESC(0 to switch between character charset
and graphics charset. Used in vt100 and later terminal generations.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Add support for ASCII S0/S1 to switch between character
charset and graphic charset.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
3270 terminals support 8 background colors. Add the code to utilize
them. Unfortunately the line erase code need to be adjusted: Without
background colors, it was sufficient to just set the line length to
zero. With background colors, we need to put spaces with the correct
background color.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
In preparation of background color and graphic escape support add
a structure for attributes can be copied at once.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
This makes the code easier to read.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
This makes the code easier to read.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
fix function prototypes split over two lines like:
static void
foobar(void)
and fix superfluous spaces in declarations like
foo * bar
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
fix function prototypes split over two lines like:
static void
foobar(void)
and fix superfluous spaces in declarations like
foo * bar
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The current code uses diag210 to infer the 3270 geometry from the
model number when running on z/VM. This doesn't work well as almost
all 3270 software clients report as 3279-2 with a custom resolution.
tty3270 assumes it has a 80x24 terminal connected because of the -2
suffix. Use diag 8c to fetch the realy geometry from z/VM.
Note that this doesn't allow dynamic resizing, i.e. reconnecting to
a z/VM session with a different geometry.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Rename the driver file to con3270 to be in sync with con3215.c.
This removes CONFIG_TN3270_TTY, it is now always build if CONFIG_TN3270
is enabled.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
There were two flavours of 3270 drivers: con3270, which provides a
console driver, and tty3270 providing a tty driver. A user could switch
with PF3 between the two views. While this sounds nice, it's a bit
annoying: If the user enters a command which triggers a kernel message,
he always has to switch back and forth to see the message. Unify both
views to have kernel messages and tty in one screen, like it is on almost
all other platforms. This also has the nice side effect of removing a lot
of duplicate code.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Will be used later for the console driver.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----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=LJ5Q
-----END PGP SIGNATURE-----
Merge tag 'block-2023-01-06' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"The big change here is obviously the revert of the pktcdvd driver
removal. Outside of that, just minor tweaks. In detail:
- Re-instate the pktcdvd driver, which necessitates adding back
bio_copy_data_iter() and the fops->devnode() hook for now (me)
- Fix for splitting of a bio marked as NOWAIT, causing either nowait
reads or writes to error with EAGAIN even if parts of the IO
completed (me)
- Fix for ublk, punting management commands to io-wq as they can all
easily block for extended periods of time (Ming)
- Removal of SRCU dependency for the block layer (Paul)"
* tag 'block-2023-01-06' of git://git.kernel.dk/linux:
block: Remove "select SRCU"
Revert "pktcdvd: remove driver."
Revert "block: remove devnode callback from struct block_device_operations"
Revert "block: bio_copy_data_iter"
ublk: honor IO_URING_F_NONBLOCK for handling control command
block: don't allow splitting of a REQ_NOWAIT bio
block: handle bio_split_to_limits() NULL return
This can't happen right now, but in preparation for allowing
bio_split_to_limits() returning NULL if it ended the bio, check for it
in all the callers.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Follow the advice of the Documentation/filesystems/sysfs.rst
and show() should only use sysfs_emit() or sysfs_emit_at()
when formatting the value to be returned to user space.
Signed-off-by: Xuezhi Zhang <zhangxuezhi1@coolpad.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Here is the set of driver core and kernfs changes for 6.2-rc1.
The "big" change in here is the addition of a new macro,
container_of_const() that will preserve the "const-ness" of a pointer
passed into it.
The "problem" of the current container_of() macro is that if you pass in
a "const *", out of it can comes a non-const pointer unless you
specifically ask for it. For many usages, we want to preserve the
"const" attribute by using the same call. For a specific example, this
series changes the kobj_to_dev() macro to use it, allowing it to be used
no matter what the const value is. This prevents every subsystem from
having to declare 2 different individual macros (i.e.
kobj_const_to_dev() and kobj_to_dev()) and having the compiler enforce
the const value at build time, which having 2 macros would not do
either.
The driver for all of this have been discussions with the Rust kernel
developers as to how to properly mark driver core, and kobject, objects
as being "non-mutable". The changes to the kobject and driver core in
this pull request are the result of that, as there are lots of paths
where kobjects and device pointers are not modified at all, so marking
them as "const" allows the compiler to enforce this.
So, a nice side affect of the Rust development effort has been already
to clean up the driver core code to be more obvious about object rules.
All of this has been bike-shedded in quite a lot of detail on lkml with
different names and implementations resulting in the tiny version we
have in here, much better than my original proposal. Lots of subsystem
maintainers have acked the changes as well.
Other than this change, included in here are smaller stuff like:
- kernfs fixes and updates to handle lock contention better
- vmlinux.lds.h fixes and updates
- sysfs and debugfs documentation updates
- device property updates
All of these have been in the linux-next tree for quite a while with no
problems, OTHER than some merge issues with other trees that should be
obvious when you hit them (block tree deletes a driver that this tree
modifies, iommufd tree modifies code that this tree also touches). If
there are merge problems with these trees, please let me know.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY5wz3A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yks0ACeKYUlVgCsER8eYW+x18szFa2QTXgAn2h/VhZe
1Fp53boFaQkGBjl8mGF8
=v+FB
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core and kernfs changes for 6.2-rc1.
The "big" change in here is the addition of a new macro,
container_of_const() that will preserve the "const-ness" of a pointer
passed into it.
The "problem" of the current container_of() macro is that if you pass
in a "const *", out of it can comes a non-const pointer unless you
specifically ask for it. For many usages, we want to preserve the
"const" attribute by using the same call. For a specific example, this
series changes the kobj_to_dev() macro to use it, allowing it to be
used no matter what the const value is. This prevents every subsystem
from having to declare 2 different individual macros (i.e.
kobj_const_to_dev() and kobj_to_dev()) and having the compiler enforce
the const value at build time, which having 2 macros would not do
either.
The driver for all of this have been discussions with the Rust kernel
developers as to how to properly mark driver core, and kobject,
objects as being "non-mutable". The changes to the kobject and driver
core in this pull request are the result of that, as there are lots of
paths where kobjects and device pointers are not modified at all, so
marking them as "const" allows the compiler to enforce this.
So, a nice side affect of the Rust development effort has been already
to clean up the driver core code to be more obvious about object
rules.
All of this has been bike-shedded in quite a lot of detail on lkml
with different names and implementations resulting in the tiny version
we have in here, much better than my original proposal. Lots of
subsystem maintainers have acked the changes as well.
Other than this change, included in here are smaller stuff like:
- kernfs fixes and updates to handle lock contention better
- vmlinux.lds.h fixes and updates
- sysfs and debugfs documentation updates
- device property updates
All of these have been in the linux-next tree for quite a while with
no problems"
* tag 'driver-core-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (58 commits)
device property: Fix documentation for fwnode_get_next_parent()
firmware_loader: fix up to_fw_sysfs() to preserve const
usb.h: take advantage of container_of_const()
device.h: move kobj_to_dev() to use container_of_const()
container_of: add container_of_const() that preserves const-ness of the pointer
driver core: fix up missed drivers/s390/char/hmcdrv_dev.c class.devnode() conversion.
driver core: fix up missed scsi/cxlflash class.devnode() conversion.
driver core: fix up some missing class.devnode() conversions.
driver core: make struct class.devnode() take a const *
driver core: make struct class.dev_uevent() take a const *
cacheinfo: Remove of_node_put() for fw_token
device property: Add a blank line in Kconfig of tests
device property: Rename goto label to be more precise
device property: Move PROPERTY_ENTRY_BOOL() a bit down
device property: Get rid of __PROPERTY_ENTRY_ARRAY_EL*SIZE*()
kernfs: fix all kernel-doc warnings and multiple typos
driver core: pass a const * into of_device_uevent()
kobject: kset_uevent_ops: make name() callback take a const *
kobject: kset_uevent_ops: make filter() callback take a const *
kobject: make kobject_namespace take a const *
...
- Replace deprecated git://github.com link in MAINTAINERS. (Palmer Dabbelt)
- Simplify vfio/mlx5 with module_pci_driver() helper. (Shang XiaoJing)
- Drop unnecessary buffer from ACPI call. (Rafael Mendonca)
- Correct latent missing include issue in iova-bitmap and fix support
for unaligned bitmaps. Follow-up with better fix through refactor.
(Joao Martins)
- Rework ccw mdev driver to split private data from parent structure,
better aligning with the mdev lifecycle and allowing us to remove
a temporary workaround. (Eric Farman)
- Add an interface to get an estimated migration data size for a device,
allowing userspace to make informed decisions, ex. more accurately
predicting VM downtime. (Yishai Hadas)
- Fix minor typo in vfio/mlx5 array declaration. (Yishai Hadas)
- Simplify module and Kconfig through consolidating SPAPR/EEH code and
config options and folding virqfd module into main vfio module.
(Jason Gunthorpe)
- Fix error path from device_register() across all vfio mdev and sample
drivers. (Alex Williamson)
- Define migration pre-copy interface and implement for vfio/mlx5
devices, allowing portions of the device state to be saved while the
device continues operation, towards reducing the stop-copy state
size. (Jason Gunthorpe, Yishai Hadas, Shay Drory)
- Implement pre-copy for hisi_acc devices. (Shameer Kolothum)
- Fixes to mdpy mdev driver remove path and error path on probe.
(Shang XiaoJing)
- vfio/mlx5 fixes for incorrect return after copy_to_user() fault and
incorrect buffer freeing. (Dan Carpenter)
-----BEGIN PGP SIGNATURE-----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=q9xs
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.2-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Replace deprecated git://github.com link in MAINTAINERS (Palmer
Dabbelt)
- Simplify vfio/mlx5 with module_pci_driver() helper (Shang XiaoJing)
- Drop unnecessary buffer from ACPI call (Rafael Mendonca)
- Correct latent missing include issue in iova-bitmap and fix support
for unaligned bitmaps. Follow-up with better fix through refactor
(Joao Martins)
- Rework ccw mdev driver to split private data from parent structure,
better aligning with the mdev lifecycle and allowing us to remove a
temporary workaround (Eric Farman)
- Add an interface to get an estimated migration data size for a
device, allowing userspace to make informed decisions, ex. more
accurately predicting VM downtime (Yishai Hadas)
- Fix minor typo in vfio/mlx5 array declaration (Yishai Hadas)
- Simplify module and Kconfig through consolidating SPAPR/EEH code and
config options and folding virqfd module into main vfio module (Jason
Gunthorpe)
- Fix error path from device_register() across all vfio mdev and sample
drivers (Alex Williamson)
- Define migration pre-copy interface and implement for vfio/mlx5
devices, allowing portions of the device state to be saved while the
device continues operation, towards reducing the stop-copy state size
(Jason Gunthorpe, Yishai Hadas, Shay Drory)
- Implement pre-copy for hisi_acc devices (Shameer Kolothum)
- Fixes to mdpy mdev driver remove path and error path on probe (Shang
XiaoJing)
- vfio/mlx5 fixes for incorrect return after copy_to_user() fault and
incorrect buffer freeing (Dan Carpenter)
* tag 'vfio-v6.2-rc1' of https://github.com/awilliam/linux-vfio: (42 commits)
vfio/mlx5: error pointer dereference in error handling
vfio/mlx5: fix error code in mlx5vf_precopy_ioctl()
samples: vfio-mdev: Fix missing pci_disable_device() in mdpy_fb_probe()
hisi_acc_vfio_pci: Enable PRE_COPY flag
hisi_acc_vfio_pci: Move the dev compatibility tests for early check
hisi_acc_vfio_pci: Introduce support for PRE_COPY state transitions
hisi_acc_vfio_pci: Add support for precopy IOCTL
vfio/mlx5: Enable MIGRATION_PRE_COPY flag
vfio/mlx5: Fallback to STOP_COPY upon specific PRE_COPY error
vfio/mlx5: Introduce multiple loads
vfio/mlx5: Consider temporary end of stream as part of PRE_COPY
vfio/mlx5: Introduce vfio precopy ioctl implementation
vfio/mlx5: Introduce SW headers for migration states
vfio/mlx5: Introduce device transitions of PRE_COPY
vfio/mlx5: Refactor to use queue based data chunks
vfio/mlx5: Refactor migration file state
vfio/mlx5: Refactor MKEY usage
vfio/mlx5: Refactor PD usage
vfio/mlx5: Enforce a single SAVE command at a time
vfio: Extend the device migration protocol with PRE_COPY
...
* Enable the per-vcpu dirty-ring tracking mechanism, together with an
option to keep the good old dirty log around for pages that are
dirtied by something other than a vcpu.
* Switch to the relaxed parallel fault handling, using RCU to delay
page table reclaim and giving better performance under load.
* Relax the MTE ABI, allowing a VMM to use the MAP_SHARED mapping option,
which multi-process VMMs such as crosvm rely on (see merge commit 382b5b87a97d:
"Fix a number of issues with MTE, such as races on the tags being
initialised vs the PG_mte_tagged flag as well as the lack of support
for VM_SHARED when KVM is involved. Patches from Catalin Marinas and
Peter Collingbourne").
* Merge the pKVM shadow vcpu state tracking that allows the hypervisor
to have its own view of a vcpu, keeping that state private.
* Add support for the PMUv3p5 architecture revision, bringing support
for 64bit counters on systems that support it, and fix the
no-quite-compliant CHAIN-ed counter support for the machines that
actually exist out there.
* Fix a handful of minor issues around 52bit VA/PA support (64kB pages
only) as a prefix of the oncoming support for 4kB and 16kB pages.
* Pick a small set of documentation and spelling fixes, because no
good merge window would be complete without those.
s390:
* Second batch of the lazy destroy patches
* First batch of KVM changes for kernel virtual != physical address support
* Removal of a unused function
x86:
* Allow compiling out SMM support
* Cleanup and documentation of SMM state save area format
* Preserve interrupt shadow in SMM state save area
* Respond to generic signals during slow page faults
* Fixes and optimizations for the non-executable huge page errata fix.
* Reprogram all performance counters on PMU filter change
* Cleanups to Hyper-V emulation and tests
* Process Hyper-V TLB flushes from a nested guest (i.e. from a L2 guest
running on top of a L1 Hyper-V hypervisor)
* Advertise several new Intel features
* x86 Xen-for-KVM:
** Allow the Xen runstate information to cross a page boundary
** Allow XEN_RUNSTATE_UPDATE flag behaviour to be configured
** Add support for 32-bit guests in SCHEDOP_poll
* Notable x86 fixes and cleanups:
** One-off fixes for various emulation flows (SGX, VMXON, NRIPS=0).
** Reinstate IBPB on emulated VM-Exit that was incorrectly dropped a few
years back when eliminating unnecessary barriers when switching between
vmcs01 and vmcs02.
** Clean up vmread_error_trampoline() to make it more obvious that params
must be passed on the stack, even for x86-64.
** Let userspace set all supported bits in MSR_IA32_FEAT_CTL irrespective
of the current guest CPUID.
** Fudge around a race with TSC refinement that results in KVM incorrectly
thinking a guest needs TSC scaling when running on a CPU with a
constant TSC, but no hardware-enumerated TSC frequency.
** Advertise (on AMD) that the SMM_CTL MSR is not supported
** Remove unnecessary exports
Generic:
* Support for responding to signals during page faults; introduces
new FOLL_INTERRUPTIBLE flag that was reviewed by mm folks
Selftests:
* Fix an inverted check in the access tracking perf test, and restore
support for asserting that there aren't too many idle pages when
running on bare metal.
* Fix build errors that occur in certain setups (unsure exactly what is
unique about the problematic setup) due to glibc overriding
static_assert() to a variant that requires a custom message.
* Introduce actual atomics for clear/set_bit() in selftests
* Add support for pinning vCPUs in dirty_log_perf_test.
* Rename the so called "perf_util" framework to "memstress".
* Add a lightweight psuedo RNG for guest use, and use it to randomize
the access pattern and write vs. read percentage in the memstress tests.
* Add a common ucall implementation; code dedup and pre-work for running
SEV (and beyond) guests in selftests.
* Provide a common constructor and arch hook, which will eventually be
used by x86 to automatically select the right hypercall (AMD vs. Intel).
* A bunch of added/enabled/fixed selftests for ARM64, covering memslots,
breakpoints, stage-2 faults and access tracking.
* x86-specific selftest changes:
** Clean up x86's page table management.
** Clean up and enhance the "smaller maxphyaddr" test, and add a related
test to cover generic emulation failure.
** Clean up the nEPT support checks.
** Add X86_PROPERTY_* framework to retrieve multi-bit CPUID values.
** Fix an ordering issue in the AMX test introduced by recent conversions
to use kvm_cpu_has(), and harden the code to guard against similar bugs
in the future. Anything that tiggers caching of KVM's supported CPUID,
kvm_cpu_has() in this case, effectively hides opt-in XSAVE features if
the caching occurs before the test opts in via prctl().
Documentation:
* Remove deleted ioctls from documentation
* Clean up the docs for the x86 MSR filter.
* Various fixes
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmOaFrcUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPemQgAq49excg2Cc+EsHnZw3vu/QWdA0Rt
KhL3OgKxuHNjCbD2O9n2t5di7eJOTQ7F7T0eDm3xPTr4FS8LQ2327/mQePU/H2CF
mWOpq9RBWLzFsSTeVA2Mz9TUTkYSnDHYuRsBvHyw/n9cL76BWVzjImldFtjYjjex
yAwl8c5itKH6bc7KO+5ydswbvBzODkeYKUSBNdbn6m0JGQST7XppNwIAJvpiHsii
Qgpk0e4Xx9q4PXG/r5DedI6BlufBsLhv0aE9SHPzyKH3JbbUFhJYI8ZD5OhBQuYW
MwxK2KlM5Jm5ud2NZDDlsMmmvd1lnYCFDyqNozaKEWC1Y5rq1AbMa51fXA==
=QAYX
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM64:
- Enable the per-vcpu dirty-ring tracking mechanism, together with an
option to keep the good old dirty log around for pages that are
dirtied by something other than a vcpu.
- Switch to the relaxed parallel fault handling, using RCU to delay
page table reclaim and giving better performance under load.
- Relax the MTE ABI, allowing a VMM to use the MAP_SHARED mapping
option, which multi-process VMMs such as crosvm rely on (see merge
commit 382b5b87a97d: "Fix a number of issues with MTE, such as
races on the tags being initialised vs the PG_mte_tagged flag as
well as the lack of support for VM_SHARED when KVM is involved.
Patches from Catalin Marinas and Peter Collingbourne").
- Merge the pKVM shadow vcpu state tracking that allows the
hypervisor to have its own view of a vcpu, keeping that state
private.
- Add support for the PMUv3p5 architecture revision, bringing support
for 64bit counters on systems that support it, and fix the
no-quite-compliant CHAIN-ed counter support for the machines that
actually exist out there.
- Fix a handful of minor issues around 52bit VA/PA support (64kB
pages only) as a prefix of the oncoming support for 4kB and 16kB
pages.
- Pick a small set of documentation and spelling fixes, because no
good merge window would be complete without those.
s390:
- Second batch of the lazy destroy patches
- First batch of KVM changes for kernel virtual != physical address
support
- Removal of a unused function
x86:
- Allow compiling out SMM support
- Cleanup and documentation of SMM state save area format
- Preserve interrupt shadow in SMM state save area
- Respond to generic signals during slow page faults
- Fixes and optimizations for the non-executable huge page errata
fix.
- Reprogram all performance counters on PMU filter change
- Cleanups to Hyper-V emulation and tests
- Process Hyper-V TLB flushes from a nested guest (i.e. from a L2
guest running on top of a L1 Hyper-V hypervisor)
- Advertise several new Intel features
- x86 Xen-for-KVM:
- Allow the Xen runstate information to cross a page boundary
- Allow XEN_RUNSTATE_UPDATE flag behaviour to be configured
- Add support for 32-bit guests in SCHEDOP_poll
- Notable x86 fixes and cleanups:
- One-off fixes for various emulation flows (SGX, VMXON, NRIPS=0).
- Reinstate IBPB on emulated VM-Exit that was incorrectly dropped
a few years back when eliminating unnecessary barriers when
switching between vmcs01 and vmcs02.
- Clean up vmread_error_trampoline() to make it more obvious that
params must be passed on the stack, even for x86-64.
- Let userspace set all supported bits in MSR_IA32_FEAT_CTL
irrespective of the current guest CPUID.
- Fudge around a race with TSC refinement that results in KVM
incorrectly thinking a guest needs TSC scaling when running on a
CPU with a constant TSC, but no hardware-enumerated TSC
frequency.
- Advertise (on AMD) that the SMM_CTL MSR is not supported
- Remove unnecessary exports
Generic:
- Support for responding to signals during page faults; introduces
new FOLL_INTERRUPTIBLE flag that was reviewed by mm folks
Selftests:
- Fix an inverted check in the access tracking perf test, and restore
support for asserting that there aren't too many idle pages when
running on bare metal.
- Fix build errors that occur in certain setups (unsure exactly what
is unique about the problematic setup) due to glibc overriding
static_assert() to a variant that requires a custom message.
- Introduce actual atomics for clear/set_bit() in selftests
- Add support for pinning vCPUs in dirty_log_perf_test.
- Rename the so called "perf_util" framework to "memstress".
- Add a lightweight psuedo RNG for guest use, and use it to randomize
the access pattern and write vs. read percentage in the memstress
tests.
- Add a common ucall implementation; code dedup and pre-work for
running SEV (and beyond) guests in selftests.
- Provide a common constructor and arch hook, which will eventually
be used by x86 to automatically select the right hypercall (AMD vs.
Intel).
- A bunch of added/enabled/fixed selftests for ARM64, covering
memslots, breakpoints, stage-2 faults and access tracking.
- x86-specific selftest changes:
- Clean up x86's page table management.
- Clean up and enhance the "smaller maxphyaddr" test, and add a
related test to cover generic emulation failure.
- Clean up the nEPT support checks.
- Add X86_PROPERTY_* framework to retrieve multi-bit CPUID values.
- Fix an ordering issue in the AMX test introduced by recent
conversions to use kvm_cpu_has(), and harden the code to guard
against similar bugs in the future. Anything that tiggers
caching of KVM's supported CPUID, kvm_cpu_has() in this case,
effectively hides opt-in XSAVE features if the caching occurs
before the test opts in via prctl().
Documentation:
- Remove deleted ioctls from documentation
- Clean up the docs for the x86 MSR filter.
- Various fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (361 commits)
KVM: x86: Add proper ReST tables for userspace MSR exits/flags
KVM: selftests: Allocate ucall pool from MEM_REGION_DATA
KVM: arm64: selftests: Align VA space allocator with TTBR0
KVM: arm64: Fix benign bug with incorrect use of VA_BITS
KVM: arm64: PMU: Fix period computation for 64bit counters with 32bit overflow
KVM: x86: Advertise that the SMM_CTL MSR is not supported
KVM: x86: remove unnecessary exports
KVM: selftests: Fix spelling mistake "probabalistic" -> "probabilistic"
tools: KVM: selftests: Convert clear/set_bit() to actual atomics
tools: Drop "atomic_" prefix from atomic test_and_set_bit()
tools: Drop conflicting non-atomic test_and_{clear,set}_bit() helpers
KVM: selftests: Use non-atomic clear/set bit helpers in KVM tests
perf tools: Use dedicated non-atomic clear/set bit helpers
tools: Take @bit as an "unsigned long" in {clear,set}_bit() helpers
KVM: arm64: selftests: Enable single-step without a "full" ucall()
KVM: x86: fix APICv/x2AVIC disabled when vm reboot by itself
KVM: Remove stale comment about KVM_REQ_UNHALT
KVM: Add missing arch for KVM_CREATE_DEVICE and KVM_{SET,GET}_DEVICE_ATTR
KVM: Reference to kvm_userspace_memory_region in doc and comments
KVM: Delete all references to removed KVM_SET_MEMORY_ALIAS ioctl
...
API:
- Optimise away self-test overhead when they are disabled.
- Support symmetric encryption via keyring keys in af_alg.
- Flip hwrng default_quality, the default is now maximum entropy.
Algorithms:
- Add library version of aesgcm.
- CFI fixes for assembly code.
- Add arm/arm64 accelerated versions of sm3/sm4.
Drivers:
- Remove assumption on arm64 that kmalloc is DMA-aligned.
- Fix selftest failures in rockchip.
- Add support for RK3328/RK3399 in rockchip.
- Add deflate support in qat.
- Merge ux500 into stm32.
- Add support for TEE for PCI ID 0x14CA in ccp.
- Add mt7986 support in mtk.
- Add MaxLinear platform support in inside-secure.
- Add NPCM8XX support in npcm.
-----BEGIN PGP SIGNATURE-----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=OpWt
-----END PGP SIGNATURE-----
Merge tag 'v6.2-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Optimise away self-test overhead when they are disabled
- Support symmetric encryption via keyring keys in af_alg
- Flip hwrng default_quality, the default is now maximum entropy
Algorithms:
- Add library version of aesgcm
- CFI fixes for assembly code
- Add arm/arm64 accelerated versions of sm3/sm4
Drivers:
- Remove assumption on arm64 that kmalloc is DMA-aligned
- Fix selftest failures in rockchip
- Add support for RK3328/RK3399 in rockchip
- Add deflate support in qat
- Merge ux500 into stm32
- Add support for TEE for PCI ID 0x14CA in ccp
- Add mt7986 support in mtk
- Add MaxLinear platform support in inside-secure
- Add NPCM8XX support in npcm"
* tag 'v6.2-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (184 commits)
crypto: ux500/cryp - delete driver
crypto: stm32/cryp - enable for use with Ux500
crypto: stm32 - enable drivers to be used on Ux500
dt-bindings: crypto: Let STM32 define Ux500 CRYP
hwrng: geode - Fix PCI device refcount leak
hwrng: amd - Fix PCI device refcount leak
crypto: qce - Set DMA alignment explicitly
crypto: octeontx2 - Set DMA alignment explicitly
crypto: octeontx - Set DMA alignment explicitly
crypto: keembay - Set DMA alignment explicitly
crypto: safexcel - Set DMA alignment explicitly
crypto: hisilicon/hpre - Set DMA alignment explicitly
crypto: chelsio - Set DMA alignment explicitly
crypto: ccree - Set DMA alignment explicitly
crypto: ccp - Set DMA alignment explicitly
crypto: cavium - Set DMA alignment explicitly
crypto: img-hash - Fix variable dereferenced before check 'hdev->req'
crypto: arm64/ghash-ce - use frame_push/pop macros consistently
crypto: arm64/crct10dif - use frame_push/pop macros consistently
crypto: arm64/aes-modes - use frame_push/pop macros consistently
...
iommufd is the user API to control the IOMMU subsystem as it relates to
managing IO page tables that point at user space memory.
It takes over from drivers/vfio/vfio_iommu_type1.c (aka the VFIO
container) which is the VFIO specific interface for a similar idea.
We see a broad need for extended features, some being highly IOMMU device
specific:
- Binding iommu_domain's to PASID/SSID
- Userspace IO page tables, for ARM, x86 and S390
- Kernel bypassed invalidation of user page tables
- Re-use of the KVM page table in the IOMMU
- Dirty page tracking in the IOMMU
- Runtime Increase/Decrease of IOPTE size
- PRI support with faults resolved in userspace
Many of these HW features exist to support VM use cases - for instance the
combination of PASID, PRI and Userspace IO Page Tables allows an
implementation of DMA Shared Virtual Addressing (vSVA) within a
guest. Dirty tracking enables VM live migration with SRIOV devices and
PASID support allow creating "scalable IOV" devices, among other things.
As these features are fundamental to a VM platform they need to be
uniformly exposed to all the driver families that do DMA into VMs, which
is currently VFIO and VDPA.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCY5ct7wAKCRCFwuHvBreF
YZZ5AQDciXfcgXLt0UBEmWupNb0f/asT6tk717pdsKm8kAZMNAEAsIyLiKT5HqGl
s7fAu+CQ1pr9+9NKGevD+frw8Solsw4=
=jJkd
-----END PGP SIGNATURE-----
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd implementation from Jason Gunthorpe:
"iommufd is the user API to control the IOMMU subsystem as it relates
to managing IO page tables that point at user space memory.
It takes over from drivers/vfio/vfio_iommu_type1.c (aka the VFIO
container) which is the VFIO specific interface for a similar idea.
We see a broad need for extended features, some being highly IOMMU
device specific:
- Binding iommu_domain's to PASID/SSID
- Userspace IO page tables, for ARM, x86 and S390
- Kernel bypassed invalidation of user page tables
- Re-use of the KVM page table in the IOMMU
- Dirty page tracking in the IOMMU
- Runtime Increase/Decrease of IOPTE size
- PRI support with faults resolved in userspace
Many of these HW features exist to support VM use cases - for instance
the combination of PASID, PRI and Userspace IO Page Tables allows an
implementation of DMA Shared Virtual Addressing (vSVA) within a guest.
Dirty tracking enables VM live migration with SRIOV devices and PASID
support allow creating "scalable IOV" devices, among other things.
As these features are fundamental to a VM platform they need to be
uniformly exposed to all the driver families that do DMA into VMs,
which is currently VFIO and VDPA"
For more background, see the extended explanations in Jason's pull request:
https://lore.kernel.org/lkml/Y5dzTU8dlmXTbzoJ@nvidia.com/
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (62 commits)
iommufd: Change the order of MSI setup
iommufd: Improve a few unclear bits of code
iommufd: Fix comment typos
vfio: Move vfio group specific code into group.c
vfio: Refactor dma APIs for emulated devices
vfio: Wrap vfio group module init/clean code into helpers
vfio: Refactor vfio_device open and close
vfio: Make vfio_device_open() truly device specific
vfio: Swap order of vfio_device_container_register() and open_device()
vfio: Set device->group in helper function
vfio: Create wrappers for group register/unregister
vfio: Move the sanity check of the group to vfio_create_group()
vfio: Simplify vfio_create_group()
iommufd: Allow iommufd to supply /dev/vfio/vfio
vfio: Make vfio_container optionally compiled
vfio: Move container related MODULE_ALIAS statements into container.c
vfio-iommufd: Support iommufd for emulated VFIO devices
vfio-iommufd: Support iommufd for physical VFIO devices
vfio-iommufd: Allow iommufd to be used in place of a container fd
vfio: Use IOMMU_CAP_ENFORCE_CACHE_COHERENCY for vfio_file_enforced_coherent()
...
Core
----
- Allow live renaming when an interface is up
- Add retpoline wrappers for tc, improving considerably the
performances of complex queue discipline configurations.
- Add inet drop monitor support.
- A few GRO performance improvements.
- Add infrastructure for atomic dev stats, addressing long standing
data races.
- De-duplicate common code between OVS and conntrack offloading
infrastructure.
- A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements.
- Netfilter: introduce packet parser for tunneled packets
- Replace IPVS timer-based estimators with kthreads to scale up
the workload with the number of available CPUs.
- Add the helper support for connection-tracking OVS offload.
BPF
---
- Support for user defined BPF objects: the use case is to allocate
own objects, build own object hierarchies and use the building
blocks to build own data structures flexibly, for example, linked
lists in BPF.
- Make cgroup local storage available to non-cgroup attached BPF
programs.
- Avoid unnecessary deadlock detection and failures wrt BPF task
storage helpers.
- A relevant bunch of BPF verifier fixes and improvements.
- Veristat tool improvements to support custom filtering, sorting,
and replay of results.
- Add LLVM disassembler as default library for dumping JITed code.
- Lots of new BPF documentation for various BPF maps.
- Add bpf_rcu_read_{,un}lock() support for sleepable programs.
- Add RCU grace period chaining to BPF to wait for the completion
of access from both sleepable and non-sleepable BPF programs.
- Add support storing struct task_struct objects as kptrs in maps.
- Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer
values.
- Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions.
Protocols
---------
- TCP: implement Protective Load Balancing across switch links.
- TCP: allow dynamically disabling TCP-MD5 static key, reverting
back to fast[er]-path.
- UDP: Introduce optional per-netns hash lookup table.
- IPv6: simplify and cleanup sockets disposal.
- Netlink: support different type policies for each generic
netlink operation.
- MPTCP: add MSG_FASTOPEN and FastOpen listener side support.
- MPTCP: add netlink notification support for listener sockets
events.
- SCTP: add VRF support, allowing sctp sockets binding to VRF
devices.
- Add bridging MAC Authentication Bypass (MAB) support.
- Extensions for Ethernet VPN bridging implementation to better
support multicast scenarios.
- More work for Wi-Fi 7 support, comprising conversion of all
the existing drivers to internal TX queue usage.
- IPSec: introduce a new offload type (packet offload) allowing
complete header processing and crypto offloading.
- IPSec: extended ack support for more descriptive XFRM error
reporting.
- RXRPC: increase SACK table size and move processing into a
per-local endpoint kernel thread, reducing considerably the
required locking.
- IEEE 802154: synchronous send frame and extended filtering
support, initial support for scanning available 15.4 networks.
- Tun: bump the link speed from 10Mbps to 10Gbps.
- Tun/VirtioNet: implement UDP segmentation offload support.
Driver API
----------
- PHY/SFP: improve power level switching between standard
level 1 and the higher power levels.
- New API for netdev <-> devlink_port linkage.
- PTP: convert existing drivers to new frequency adjustment
implementation.
- DSA: add support for rx offloading.
- Autoload DSA tagging driver when dynamically changing protocol.
- Add new PCP and APPTRUST attributes to Data Center Bridging.
- Add configuration support for 800Gbps link speed.
- Add devlink port function attribute to enable/disable RoCE and
migratable.
- Extend devlink-rate to support strict prioriry and weighted fair
queuing.
- Add devlink support to directly reading from region memory.
- New device tree helper to fetch MAC address from nvmem.
- New big TCP helper to simplify temporary header stripping.
New hardware / drivers
----------------------
- Ethernet:
- Marvel Octeon CNF95N and CN10KB Ethernet Switches.
- Marvel Prestera AC5X Ethernet Switch.
- WangXun 10 Gigabit NIC.
- Motorcomm yt8521 Gigabit Ethernet.
- Microchip ksz9563 Gigabit Ethernet Switch.
- Microsoft Azure Network Adapter.
- Linux Automation 10Base-T1L adapter.
- PHY:
- Aquantia AQR112 and AQR412.
- Motorcomm YT8531S.
- PTP:
- Orolia ART-CARD.
- WiFi:
- MediaTek Wi-Fi 7 (802.11be) devices.
- RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB
devices.
- Bluetooth:
- Broadcom BCM4377/4378/4387 Bluetooth chipsets.
- Realtek RTL8852BE and RTL8723DS.
- Cypress.CYW4373A0 WiFi + Bluetooth combo device.
Drivers
-------
- CAN:
- gs_usb: bus error reporting support.
- kvaser_usb: listen only and bus error reporting support.
- Ethernet NICs:
- Intel (100G):
- extend action skbedit to RX queue mapping.
- implement devlink-rate support.
- support direct read from memory.
- nVidia/Mellanox (mlx5):
- SW steering improvements, increasing rules update rate.
- Support for enhanced events compression.
- extend H/W offload packet manipulation capabilities.
- implement IPSec packet offload mode.
- nVidia/Mellanox (mlx4):
- better big TCP support.
- Netronome Ethernet NICs (nfp):
- IPsec offload support.
- add support for multicast filter.
- Broadcom:
- RSS and PTP support improvements.
- AMD/SolarFlare:
- netlink extened ack improvements.
- add basic flower matches to offload, and related stats.
- Virtual NICs:
- ibmvnic: introduce affinity hint support.
- small / embedded:
- FreeScale fec: add initial XDP support.
- Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood.
- TI am65-cpsw: add suspend/resume support.
- Mediatek MT7986: add RX wireless wthernet dispatch support.
- Realtek 8169: enable GRO software interrupt coalescing per
default.
- Ethernet high-speed switches:
- Microchip (sparx5):
- add support for Sparx5 TC/flower H/W offload via VCAP.
- Mellanox mlxsw:
- add 802.1X and MAC Authentication Bypass offload support.
- add ip6gre support.
- Embedded Ethernet switches:
- Mediatek (mtk_eth_soc):
- improve PCS implementation, add DSA untag support.
- enable flow offload support.
- Renesas:
- add rswitch R-Car Gen4 gPTP support.
- Microchip (lan966x):
- add full XDP support.
- add TC H/W offload via VCAP.
- enable PTP on bridge interfaces.
- Microchip (ksz8):
- add MTU support for KSZ8 series.
- Qualcomm 802.11ax WiFi (ath11k):
- support configuring channel dwell time during scan.
- MediaTek WiFi (mt76):
- enable Wireless Ethernet Dispatch (WED) offload support.
- add ack signal support.
- enable coredump support.
- remain_on_channel support.
- Intel WiFi (iwlwifi):
- enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities.
- 320 MHz channels support.
- RealTek WiFi (rtw89):
- new dynamic header firmware format support.
- wake-over-WLAN support.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=CbJC
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Allow live renaming when an interface is up
- Add retpoline wrappers for tc, improving considerably the
performances of complex queue discipline configurations
- Add inet drop monitor support
- A few GRO performance improvements
- Add infrastructure for atomic dev stats, addressing long standing
data races
- De-duplicate common code between OVS and conntrack offloading
infrastructure
- A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements
- Netfilter: introduce packet parser for tunneled packets
- Replace IPVS timer-based estimators with kthreads to scale up the
workload with the number of available CPUs
- Add the helper support for connection-tracking OVS offload
BPF:
- Support for user defined BPF objects: the use case is to allocate
own objects, build own object hierarchies and use the building
blocks to build own data structures flexibly, for example, linked
lists in BPF
- Make cgroup local storage available to non-cgroup attached BPF
programs
- Avoid unnecessary deadlock detection and failures wrt BPF task
storage helpers
- A relevant bunch of BPF verifier fixes and improvements
- Veristat tool improvements to support custom filtering, sorting,
and replay of results
- Add LLVM disassembler as default library for dumping JITed code
- Lots of new BPF documentation for various BPF maps
- Add bpf_rcu_read_{,un}lock() support for sleepable programs
- Add RCU grace period chaining to BPF to wait for the completion of
access from both sleepable and non-sleepable BPF programs
- Add support storing struct task_struct objects as kptrs in maps
- Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer
values
- Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions
Protocols:
- TCP: implement Protective Load Balancing across switch links
- TCP: allow dynamically disabling TCP-MD5 static key, reverting back
to fast[er]-path
- UDP: Introduce optional per-netns hash lookup table
- IPv6: simplify and cleanup sockets disposal
- Netlink: support different type policies for each generic netlink
operation
- MPTCP: add MSG_FASTOPEN and FastOpen listener side support
- MPTCP: add netlink notification support for listener sockets events
- SCTP: add VRF support, allowing sctp sockets binding to VRF devices
- Add bridging MAC Authentication Bypass (MAB) support
- Extensions for Ethernet VPN bridging implementation to better
support multicast scenarios
- More work for Wi-Fi 7 support, comprising conversion of all the
existing drivers to internal TX queue usage
- IPSec: introduce a new offload type (packet offload) allowing
complete header processing and crypto offloading
- IPSec: extended ack support for more descriptive XFRM error
reporting
- RXRPC: increase SACK table size and move processing into a
per-local endpoint kernel thread, reducing considerably the
required locking
- IEEE 802154: synchronous send frame and extended filtering support,
initial support for scanning available 15.4 networks
- Tun: bump the link speed from 10Mbps to 10Gbps
- Tun/VirtioNet: implement UDP segmentation offload support
Driver API:
- PHY/SFP: improve power level switching between standard level 1 and
the higher power levels
- New API for netdev <-> devlink_port linkage
- PTP: convert existing drivers to new frequency adjustment
implementation
- DSA: add support for rx offloading
- Autoload DSA tagging driver when dynamically changing protocol
- Add new PCP and APPTRUST attributes to Data Center Bridging
- Add configuration support for 800Gbps link speed
- Add devlink port function attribute to enable/disable RoCE and
migratable
- Extend devlink-rate to support strict prioriry and weighted fair
queuing
- Add devlink support to directly reading from region memory
- New device tree helper to fetch MAC address from nvmem
- New big TCP helper to simplify temporary header stripping
New hardware / drivers:
- Ethernet:
- Marvel Octeon CNF95N and CN10KB Ethernet Switches
- Marvel Prestera AC5X Ethernet Switch
- WangXun 10 Gigabit NIC
- Motorcomm yt8521 Gigabit Ethernet
- Microchip ksz9563 Gigabit Ethernet Switch
- Microsoft Azure Network Adapter
- Linux Automation 10Base-T1L adapter
- PHY:
- Aquantia AQR112 and AQR412
- Motorcomm YT8531S
- PTP:
- Orolia ART-CARD
- WiFi:
- MediaTek Wi-Fi 7 (802.11be) devices
- RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB
devices
- Bluetooth:
- Broadcom BCM4377/4378/4387 Bluetooth chipsets
- Realtek RTL8852BE and RTL8723DS
- Cypress.CYW4373A0 WiFi + Bluetooth combo device
Drivers:
- CAN:
- gs_usb: bus error reporting support
- kvaser_usb: listen only and bus error reporting support
- Ethernet NICs:
- Intel (100G):
- extend action skbedit to RX queue mapping
- implement devlink-rate support
- support direct read from memory
- nVidia/Mellanox (mlx5):
- SW steering improvements, increasing rules update rate
- Support for enhanced events compression
- extend H/W offload packet manipulation capabilities
- implement IPSec packet offload mode
- nVidia/Mellanox (mlx4):
- better big TCP support
- Netronome Ethernet NICs (nfp):
- IPsec offload support
- add support for multicast filter
- Broadcom:
- RSS and PTP support improvements
- AMD/SolarFlare:
- netlink extened ack improvements
- add basic flower matches to offload, and related stats
- Virtual NICs:
- ibmvnic: introduce affinity hint support
- small / embedded:
- FreeScale fec: add initial XDP support
- Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood
- TI am65-cpsw: add suspend/resume support
- Mediatek MT7986: add RX wireless wthernet dispatch support
- Realtek 8169: enable GRO software interrupt coalescing per
default
- Ethernet high-speed switches:
- Microchip (sparx5):
- add support for Sparx5 TC/flower H/W offload via VCAP
- Mellanox mlxsw:
- add 802.1X and MAC Authentication Bypass offload support
- add ip6gre support
- Embedded Ethernet switches:
- Mediatek (mtk_eth_soc):
- improve PCS implementation, add DSA untag support
- enable flow offload support
- Renesas:
- add rswitch R-Car Gen4 gPTP support
- Microchip (lan966x):
- add full XDP support
- add TC H/W offload via VCAP
- enable PTP on bridge interfaces
- Microchip (ksz8):
- add MTU support for KSZ8 series
- Qualcomm 802.11ax WiFi (ath11k):
- support configuring channel dwell time during scan
- MediaTek WiFi (mt76):
- enable Wireless Ethernet Dispatch (WED) offload support
- add ack signal support
- enable coredump support
- remain_on_channel support
- Intel WiFi (iwlwifi):
- enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities
- 320 MHz channels support
- RealTek WiFi (rtw89):
- new dynamic header firmware format support
- wake-over-WLAN support"
* tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2002 commits)
ipvs: fix type warning in do_div() on 32 bit
net: lan966x: Remove a useless test in lan966x_ptp_add_trap()
net: ipa: add IPA v4.7 support
dt-bindings: net: qcom,ipa: Add SM6350 compatible
bnxt: Use generic HBH removal helper in tx path
IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver
selftests: forwarding: Add bridge MDB test
selftests: forwarding: Rename bridge_mdb test
bridge: mcast: Support replacement of MDB port group entries
bridge: mcast: Allow user space to specify MDB entry routing protocol
bridge: mcast: Allow user space to add (*, G) with a source list and filter mode
bridge: mcast: Add support for (*, G) with a source list and filter mode
bridge: mcast: Avoid arming group timer when (S, G) corresponds to a source
bridge: mcast: Add a flag for user installed source entries
bridge: mcast: Expose __br_multicast_del_group_src()
bridge: mcast: Expose br_multicast_new_group_src()
bridge: mcast: Add a centralized error path
bridge: mcast: Place netlink policy before validation functions
bridge: mcast: Split (*, G) and (S, G) addition into different functions
bridge: mcast: Do not derive entry type from its filter mode
...
direction misannotations and (hopefully) preventing
more of the same for the future.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHQEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCY5ZzQAAKCRBZ7Krx/gZQ
65RZAP4nTkvOn0NZLVFkuGOx8pgJelXAvrteyAuecVL8V6CR4AD40qCVY51PJp8N
MzwiRTeqnGDxTTF7mgd//IB6hoatAA==
=bcvF
-----END PGP SIGNATURE-----
Merge tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull iov_iter updates from Al Viro:
"iov_iter work; most of that is about getting rid of direction
misannotations and (hopefully) preventing more of the same for the
future"
* tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
use less confusing names for iov_iter direction initializers
iov_iter: saner checks for attempt to copy to/from iterator
[xen] fix "direction" argument of iov_iter_kvec()
[vhost] fix 'direction' argument of iov_iter_{init,bvec}()
[target] fix iov_iter_bvec() "direction" argument
[s390] memcpy_real(): WRITE is "data source", not destination...
[s390] zcore: WRITE is "data source", not destination...
[infiniband] READ is "data destination", not source...
[fsi] WRITE is "data source", not destination...
[s390] copy_oldmem_kernel() - WRITE is "data source", not destination
csum_and_copy_to_iter(): handle ITER_DISCARD
get rid of unlikely() on page_copy_sane() calls
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEq5lC5tSkz8NBJiCnSfxwEqXeA64FAmOU+U8ACgkQSfxwEqXe
A67NnQ//Y5DltmvibyPd7r1TFT2gUYv+Rx3sUV9ZE1NYptd/SWhhcL8c5FZ70Fuw
bSKCa1uiWjOxosjXT1kGrWq3de7q7oUpAPSOGxgxzoaNURIt58N/ajItCX/4Au8I
RlGAScHy5e5t41/26a498kB6qJ441fBEqCYKQpPLINMBAhe8TQ+NVp0rlpUwNHFX
WrUGg4oKWxdBIW3HkDirQjJWDkkAiklRTifQh/Al4b6QDbOnRUGGCeckNOhixsvS
waHWTld+Td8jRrA4b82tUb2uVZ2/b8dEvj/A8CuTv4yC0lywoyMgBWmJAGOC+UmT
ZVNdGW02Jc2T+Iap8ZdsEmeLHNqbli4+IcbY5xNlov+tHJ2oz41H9TZoYKbudlr6
/ReAUPSn7i50PhbQlEruj3eg+M2gjOeh8OF8UKwwRK8PghvyWQ1ScW0l3kUhPIhI
PdIG6j4+D2mJc1FIj2rTVB+Bg933x6S+qx4zDxGlNp62AARUFYf6EgyD6aXFQVuX
RxcKb6cjRuFkzFiKc8zkqg5edZH+IJcPNuIBmABqTGBOxbZWURXzIQvK/iULqZa4
CdGAFIs6FuOh8pFHLI3R4YoHBopbHup/xKDEeAO9KZGyeVIuOSERDxxo5f/ITzcq
APvT77DFOEuyvanr8RMqqh0yUjzcddXqw9+ieufsAyDwjD9DTuE=
=QRhK
-----END PGP SIGNATURE-----
Merge tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
- Replace prandom_u32_max() and various open-coded variants of it,
there is now a new family of functions that uses fast rejection
sampling to choose properly uniformly random numbers within an
interval:
get_random_u32_below(ceil) - [0, ceil)
get_random_u32_above(floor) - (floor, U32_MAX]
get_random_u32_inclusive(floor, ceil) - [floor, ceil]
Coccinelle was used to convert all current users of
prandom_u32_max(), as well as many open-coded patterns, resulting in
improvements throughout the tree.
I'll have a "late" 6.1-rc1 pull for you that removes the now unused
prandom_u32_max() function, just in case any other trees add a new
use case of it that needs to converted. According to linux-next,
there may be two trivial cases of prandom_u32_max() reintroductions
that are fixable with a 's/.../.../'. So I'll have for you a final
conversion patch doing that alongside the removal patch during the
second week.
This is a treewide change that touches many files throughout.
- More consistent use of get_random_canary().
- Updates to comments, documentation, tests, headers, and
simplification in configuration.
- The arch_get_random*_early() abstraction was only used by arm64 and
wasn't entirely useful, so this has been replaced by code that works
in all relevant contexts.
- The kernel will use and manage random seeds in non-volatile EFI
variables, refreshing a variable with a fresh seed when the RNG is
initialized. The RNG GUID namespace is then hidden from efivarfs to
prevent accidental leakage.
These changes are split into random.c infrastructure code used in the
EFI subsystem, in this pull request, and related support inside of
EFISTUB, in Ard's EFI tree. These are co-dependent for full
functionality, but the order of merging doesn't matter.
- Part of the infrastructure added for the EFI support is also used for
an improvement to the way vsprintf initializes its siphash key,
replacing an sleep loop wart.
- The hardware RNG framework now always calls its correct random.c
input function, add_hwgenerator_randomness(), rather than sometimes
going through helpers better suited for other cases.
- The add_latent_entropy() function has long been called from the fork
handler, but is a no-op when the latent entropy gcc plugin isn't
used, which is fine for the purposes of latent entropy.
But it was missing out on the cycle counter that was also being mixed
in beside the latent entropy variable. So now, if the latent entropy
gcc plugin isn't enabled, add_latent_entropy() will expand to a call
to add_device_randomness(NULL, 0), which adds a cycle counter,
without the absent latent entropy variable.
- The RNG is now reseeded from a delayed worker, rather than on demand
when used. Always running from a worker allows it to make use of the
CPU RNG on platforms like S390x, whose instructions are too slow to
do so from interrupts. It also has the effect of adding in new inputs
more frequently with more regularity, amounting to a long term
transcript of random values. Plus, it helps a bit with the upcoming
vDSO implementation (which isn't yet ready for 6.2).
- The jitter entropy algorithm now tries to execute on many different
CPUs, round-robining, in hopes of hitting even more memory latencies
and other unpredictable effects. It also will mix in a cycle counter
when the entropy timer fires, in addition to being mixed in from the
main loop, to account more explicitly for fluctuations in that timer
firing. And the state it touches is now kept within the same cache
line, so that it's assured that the different execution contexts will
cause latencies.
* tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (23 commits)
random: include <linux/once.h> in the right header
random: align entropy_timer_state to cache line
random: mix in cycle counter when jitter timer fires
random: spread out jitter callback to different CPUs
random: remove extraneous period and add a missing one in comments
efi: random: refresh non-volatile random seed when RNG is initialized
vsprintf: initialize siphash key using notifier
random: add back async readiness notifier
random: reseed in delayed work rather than on-demand
random: always mix cycle counter in add_latent_entropy()
hw_random: use add_hwgenerator_randomness() for early entropy
random: modernize documentation comment on get_random_bytes()
random: adjust comment to account for removed function
random: remove early archrandom abstraction
random: use random.trust_{bootloader,cpu} command line option only
stackprotector: actually use get_random_canary()
stackprotector: move get_random_canary() into stackprotector.h
treewide: use get_random_u32_inclusive() when possible
treewide: use get_random_u32_{above,below}() instead of manual loop
treewide: use get_random_u32_below() instead of deprecated function
...
- Factor out handle_write() function and simplify 3215 console
write operation.
- When 3170 terminal emulator is connected to the 3215 console
driver the boot time could be very long due to limited buffer
space or missing operator input. Add con3215_drop command line
parameter and con3215_drop sysfs attribute file to instruct
the kernel drop console data when such conditions are met.
- Fix white space errors in 3215 console driver.
- Move enum paiext_mode definition to a header file and rename
it to paievt_mode to indicate this is now used for several
events. Rename PAI_MODE_COUNTER to PAI_MODE_COUNTING to make
consistent with PAI_MODE_SAMPLING.
- Simplify the logic of PMU pai_crypto mapped buffer reference
counter and make it consistent with PMU pai_ext.
- Rename PMU pai_crypto mapped buffer structure member users
to active_events to make it consistent with PMU pai_ext.
- Enable HUGETLB_PAGE_OPTIMIZE_VMEMMAP configuration option.
This results in saving of 12K per 1M hugetlb page (~1.2%)
and 32764K per 2G hugetlb page (~1.6%).
- Use generic serial.h, bugs.h, shmparam.h and vga.h header
files and scrap s390-specific versions.
- The generic percpu setup code does not expect the s390-like
implementation and emits a warning. To get rid of that warning
and provide sane CPU-to-node and CPU-to-CPU distance mappings
implementat a minimal version of setup_per_cpu_areas().
- Use kstrtobool() instead of strtobool() for re-IPL sysfs device
attributes.
- Avoid unnecessary lookup of a pointer to MSI descriptor when
setting IRQ affinity for a PCI device.
- Get rid of "an incompatible function type cast" warning by
changing debug_sprintf_format_fn() function prototype so it
matches the debug_format_proc_t function type.
- Remove unused info_blk_hdr__pcpus() and get_page_state()
functions.
- Get rid of clang "unused unused insn cache ops function"
warning by moving s390_insn definition to a private header.
- Get rid of clang "unused function" warning by making function
raw3270_state_final() only available if CONFIG_TN3270_CONSOLE
is enabled.
- Use kstrobool() to parse sclp_con_drop parameter to make it
identical to the con3215_drop parameter and allow passing
values like "yes" and "true".
- Use sysfs_emit() for all SCLP sysfs show functions, which is
the current standard way to generate output strings.
- Make SCLP con_drop sysfs attribute also writable and allow to
change its value during runtime. This makes SCLP console drop
handling consistent with the 3215 device driver.
- Virtual and physical addresses are indentical on s390. However,
there is still a confusion when pointers are directly casted to
physical addresses or vice versa. Use correct address converters
virt_to_phys() and phys_to_virt() for s390 channel IO drivers.
- Support for power managemant has been removed from s390 since
quite some time. Remove unused power managemant code from the
appldata device driver.
- Allow memory tools like KASAN see memory accesses from the
checksum code. Switch to GENERIC_CSUM if KASAN is enabled,
just like x86 does.
- Add support of ECKD DASDs disks so it could be used as boot
and dump devices.
- Follow checkpatch recommendations and use octal values instead
of S_IRUGO and S_IWUSR for dump device attributes in sysfs.
- Changes to vx-insn.h do not cause a recompile of C files that
use asm(".include \"asm/vx-insn.h\"\n") magic to access vector
instruction macros from inline assemblies. Add wrapper include
header file to avoid this problem.
- Use vector instruction macros instead of byte patterns to
increase register validation routine readability.
- The current machine check register validation handling does not
take into account various scenarios and might lead to killing a
wrong user process or potentially ignore corrupted FPU registers.
Simplify logic of the machine check handler and stop the whole
machine if the previous context was kerenel mode. If the previous
context was user mode, kill the current task.
- Introduce sclp_emergency_printk() function which can be used to
emit a message in emergency cases. It is supposed to be used in
cases where regular console device drivers may not work anymore,
e.g. unrecoverable machine checks.
Keep the early Service-Call Control Block so it can also be used
after initdata has been freed to allow sclp_emergency_printk()
implementation.
- In case a system will be stopped because of an unrecoverable
machine check error print the machine check interruption code
to give a hint of what went wrong.
- Move storage error checking from the assembly entry code to C
in order to simplify machine check handling. Enter the handler
with DAT turned on, which simplifies the entry code even more.
- The machine check extended save areas are allocated using
a private "nmi_save_areas" slab cache which guarantees a
required power-of-two alignment. Get rid of that cache in
favour of kmalloc().
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCY5ckrhccYWdvcmRlZXZA
bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8NlrAQD8NCLeEAkhGCRnzdTyngExCrzV
Mw//cEnksUkIPqalJgEArbyFjGh05ecNaiDQduH8Gh94/qOhGE4obMdTgMWq7QY=
=3aou
-----END PGP SIGNATURE-----
Merge tag 's390-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Factor out handle_write() function and simplify 3215 console write
operation
- When 3170 terminal emulator is connected to the 3215 console driver
the boot time could be very long due to limited buffer space or
missing operator input. Add con3215_drop command line parameter and
con3215_drop sysfs attribute file to instruct the kernel drop console
data when such conditions are met
- Fix white space errors in 3215 console driver
- Move enum paiext_mode definition to a header file and rename it to
paievt_mode to indicate this is now used for several events. Rename
PAI_MODE_COUNTER to PAI_MODE_COUNTING to make consistent with
PAI_MODE_SAMPLING
- Simplify the logic of PMU pai_crypto mapped buffer reference counter
and make it consistent with PMU pai_ext
- Rename PMU pai_crypto mapped buffer structure member users to
active_events to make it consistent with PMU pai_ext
- Enable HUGETLB_PAGE_OPTIMIZE_VMEMMAP configuration option. This
results in saving of 12K per 1M hugetlb page (~1.2%) and 32764K per
2G hugetlb page (~1.6%)
- Use generic serial.h, bugs.h, shmparam.h and vga.h header files and
scrap s390-specific versions
- The generic percpu setup code does not expect the s390-like
implementation and emits a warning. To get rid of that warning and
provide sane CPU-to-node and CPU-to-CPU distance mappings implementat
a minimal version of setup_per_cpu_areas()
- Use kstrtobool() instead of strtobool() for re-IPL sysfs device
attributes
- Avoid unnecessary lookup of a pointer to MSI descriptor when setting
IRQ affinity for a PCI device
- Get rid of "an incompatible function type cast" warning by changing
debug_sprintf_format_fn() function prototype so it matches the
debug_format_proc_t function type
- Remove unused info_blk_hdr__pcpus() and get_page_state() functions
- Get rid of clang "unused unused insn cache ops function" warning by
moving s390_insn definition to a private header
- Get rid of clang "unused function" warning by making function
raw3270_state_final() only available if CONFIG_TN3270_CONSOLE is
enabled
- Use kstrobool() to parse sclp_con_drop parameter to make it identical
to the con3215_drop parameter and allow passing values like "yes" and
"true"
- Use sysfs_emit() for all SCLP sysfs show functions, which is the
current standard way to generate output strings
- Make SCLP con_drop sysfs attribute also writable and allow to change
its value during runtime. This makes SCLP console drop handling
consistent with the 3215 device driver
- Virtual and physical addresses are indentical on s390. However, there
is still a confusion when pointers are directly casted to physical
addresses or vice versa. Use correct address converters
virt_to_phys() and phys_to_virt() for s390 channel IO drivers
- Support for power managemant has been removed from s390 since quite
some time. Remove unused power managemant code from the appldata
device driver
- Allow memory tools like KASAN see memory accesses from the checksum
code. Switch to GENERIC_CSUM if KASAN is enabled, just like x86 does
- Add support of ECKD DASDs disks so it could be used as boot and dump
devices
- Follow checkpatch recommendations and use octal values instead of
S_IRUGO and S_IWUSR for dump device attributes in sysfs
- Changes to vx-insn.h do not cause a recompile of C files that use
asm(".include \"asm/vx-insn.h\"\n") magic to access vector
instruction macros from inline assemblies. Add wrapper include header
file to avoid this problem
- Use vector instruction macros instead of byte patterns to increase
register validation routine readability
- The current machine check register validation handling does not take
into account various scenarios and might lead to killing a wrong user
process or potentially ignore corrupted FPU registers. Simplify logic
of the machine check handler and stop the whole machine if the
previous context was kerenel mode. If the previous context was user
mode, kill the current task
- Introduce sclp_emergency_printk() function which can be used to emit
a message in emergency cases. It is supposed to be used in cases
where regular console device drivers may not work anymore, e.g.
unrecoverable machine checks
Keep the early Service-Call Control Block so it can also be used
after initdata has been freed to allow sclp_emergency_printk()
implementation
- In case a system will be stopped because of an unrecoverable machine
check error print the machine check interruption code to give a hint
of what went wrong
- Move storage error checking from the assembly entry code to C in
order to simplify machine check handling. Enter the handler with DAT
turned on, which simplifies the entry code even more
- The machine check extended save areas are allocated using a private
"nmi_save_areas" slab cache which guarantees a required power-of-two
alignment. Get rid of that cache in favour of kmalloc()
* tag 's390-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (38 commits)
s390/nmi: get rid of private slab cache
s390/nmi: move storage error checking back to C, enter with DAT on
s390/nmi: print machine check interruption code before stopping system
s390/sclp: introduce sclp_emergency_printk()
s390/sclp: keep sclp_early_sccb
s390/nmi: rework register validation handling
s390/nmi: use vector instruction macros instead of byte patterns
s390/vx: add vx-insn.h wrapper include file
s390/ipl: use octal values instead of S_* macros
s390/ipl: add eckd dump support
s390/ipl: add eckd support
vfio/ccw: identify CCW data addresses as physical
vfio/ccw: sort out physical vs virtual pointers usage
s390/checksum: support GENERIC_CSUM, enable it for KASAN
s390/appldata: remove power management callbacks
s390/cio: sort out physical vs virtual pointers usage
s390/sclp: allow to change sclp_console_drop during runtime
s390/sclp: convert to use sysfs_emit()
s390/sclp: use kstrobool() to parse sclp_con_drop parameter
s390/3270: make raw3270_state_final() depend on CONFIG_TN3270_CONSOLE
...
Introduce sclp_emergency_printk() which can be used to emit a message
in emergency cases. sclp_emergency_printk() is only supposed to be
used in cases where it can be assumed that regular console device
drivers may not work anymore.
For example this may be the case for unrecoverable machine checks.
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Keep sclp_early_sccb so it can also be used after initdata has been
freed. This is a prerequisite to allow printing a message from the
machine check handler.
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
This adds support to use ECKD disks as dump device
to linux. The new dump type is called 'eckd_dump', parameters
are the same as for eckd ipl.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
This adds support to IPL from ECKD DASDs to linux.
It introduces a few sysfs files in /sys/firmware/reipl/eckd:
bootprog: the boot program selector
clear: whether to issue a diag308 LOAD_NORMAL or LOAD_CLEAR
device: the device to ipl from
br_chr: Cylinder/Head/Record number to read the bootrecord from.
Might be '0' or 'auto' if it should be read from the
volume label.
scpdata: data to be passed to the ipl'd program.
The new ipl type is called 'eckd'.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
We always need to call put_device() if device_register() fails.
All vfio drivers calling device_register() include a similar unwind
stack via gotos, therefore split device_unregister() into its
device_del() and put_device() components in the unwind path, and
add a goto target to handle only the put_device() requirement.
Reported-by: Ruan Jinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/all/20221118032827.3725190-1-ruanjinjie@huawei.com
Fixes: d61fc96f47 ("sample: vfio mdev display - host device")
Fixes: 9d1a546c53 ("docs: Sample driver to demonstrate how to use Mediated device framework.")
Fixes: a5e6e6505f ("sample: vfio bochs vbe display (host device for bochs-drm)")
Fixes: 9e6f07cd1e ("vfio/ccw: create a parent struct")
Fixes: 36360658eb ("s390: vfio_ap: link the vfio_ap devices to the vfio_ap bus subsystem")
Cc: Tony Krowiak <akrowiak@linux.ibm.com>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Jason Herne <jjherne@linux.ibm.com>
Cc: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Link: https://lore.kernel.org/r/166999942139.645727.12439756512449846442.stgit@omen
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The CCW data address created by vfio-ccw is that of an IDAL
built by this code. Since this address is used by real hardware,
it should be a physical address rather than a virtual one.
Let's clarify it as such in the ORB.
Similarly, once the I/O has completed the memory for that IDAL
needs to be released, so convert the CCW data address back to
a virtual address so that kfree() can process it.
Note: this currently doesn't fix a real bug, since virtual
addresses are identical to physical ones.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/r/20221121165836.283781-3-farman@linux.ibm.com
The ORB's interrupt parameter field is stored unmodified into the
interruption code when an I/O interrupt occurs. As this reflects
a real device, let's store the physical address of the subchannel
struct so it can be used when processing an interrupt.
Note: this currently doesn't fix a real bug, since virtual
addresses are identical to physical ones.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
[EF: Updated commit message]
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Link: https://lore.kernel.org/r/20221121165836.283781-2-farman@linux.ibm.com
Resolve conflicts in drivers/vfio/vfio_main.c by using the iommfd version.
The rc fix was done a different way when iommufd patches reworked this
code.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Emulated VFIO devices are calling vfio_register_emulated_iommu_dev() and
consist of all the mdev drivers.
Like the physical drivers, support for iommufd is provided by the driver
supplying the correct standard ops. Provide ops from the core that
duplicate what vfio_register_emulated_iommu_dev() does.
Emulated drivers are where it is more likely to see variation in the
iommfd support ops. For instance IDXD will probably need to setup both a
iommfd_device context linked to a PASID and an iommufd_access context to
support all their mdev operations.
Link: https://lore.kernel.org/r/7-v4-42cd2eb0e3eb+335a-vfio_iommufd_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently, each mapped iova is stashed in its associated vfio_ap_queue;
when we get an unmap request, validate that it matches with one or more of
these stashed values before attempting unpins.
Each stashed iova represents IRQ that was enabled for a queue. Therefore,
if a match is found, trigger IRQ disable for this queue to ensure that
underlying firmware will no longer try to use the associated pfn after the
page is unpinned. IRQ disable will also handle the associated unpin.
Link: https://lore.kernel.org/r/20221202135402.756470-3-yi.l.liu@intel.com
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This does not fix a real bug, since virtual addresses
are currently indentical to physical ones.
Use virt_to_phys() for intparm interrupt parameter to
convert a 64-bit virtual address to the 32-bit physical
address, which is expected to be below 2GB.
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Make sclp's con_drop sysfs attribute also writable, and allow to
change its value during runtime. This way handling of sclp console
drop handling is consistent with the 3215 device driver.
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Use sysfs_emit() for all sclp sysfs show functions, which is the
current standard way to generate output strings.
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Use kstrobool() to parse sclp_con_drop parameter. This way handling of
valid values for the sclp_con_drop parameter is identical to the
con3215_drop parameter. In particular this allows to pass values like
"yes" and "true", which was not possible before.
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
- First batch of KVM changes for kernel virtual != physical address support
- Removal of a unused function
-----BEGIN PGP SIGNATURE-----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=/1yt
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-next-6.2-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
- Second batch of the lazy destroy patches
- First batch of KVM changes for kernel virtual != physical address support
- Removal of a unused function
-----BEGIN PGP SIGNATURE-----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=41zr
-----END PGP SIGNATURE-----
Merge tag 'block-6.1-2022-11-25' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- A few fixes for s390 sads (Stefan, Colin)
- Ensure that ublk doesn't reorder requests, as that can be problematic
on devices that need specific ordering (Ming)
- Fix a queue reference leak in disk allocation handling (Christoph)
* tag 'block-6.1-2022-11-25' of git://git.kernel.dk/linux:
ublk_drv: don't forward io commands in reserve order
s390/dasd: fix possible buffer overflow in copy_pair_show
s390/dasd: fix no record found for raw_track_access
s390/dasd: increase printing of debug data payload
s390/dasd: Fix spelling mistake "Ivalid" -> "Invalid"
blk-mq: fix queue reference leak on blk_mq_alloc_disk_for_queue failure
- Fix size of incorrectly increased from four to eight bytes
TOD field of crash dump save area. As result in case of
kdump NT_S390_TODPREG ELF notes section contains correct
value and "detected read beyond size of field" compiler
warning goes away.
- Fix memory leak in cryptographic Adjunct Processors (AP)
module on initialization failure path.
- Add Gerald Schaefer <gerald.schaefer@linux.ibm.com> and
Alexander Gordeev <agordeev@linux.ibm.com> as S390 memory
management maintainers. Also rename the S390 section to
S390 ARCHITECTURE to be a bit more precise.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCY4DkjxccYWdvcmRlZXZA
bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8JrmAP928nAXDg4Gfctxka3tANgqu6uZ
SLQ79G717Hq+OHyYjwD9GHFrKjfaimYocAsyf9jPyKnnac4jVydA42CLdLbV2AI=
=Vl1I
-----END PGP SIGNATURE-----
Merge tag 's390-6.1-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Fix size of incorrectly increased from four to eight bytes TOD field
of crash dump save area. As result in case of kdump NT_S390_TODPREG
ELF notes section contains correct value and "detected read beyond
size of field" compiler warning goes away.
- Fix memory leak in cryptographic Adjunct Processors (AP) module on
initialization failure path.
- Add Gerald Schaefer <gerald.schaefer@linux.ibm.com> and Alexander
Gordeev <agordeev@linux.ibm.com> as S390 memory management
maintainers. Also rename the S390 section to S390 ARCHITECTURE to be
a bit more precise.
* tag 's390-6.1-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
MAINTAINERS: add S390 MM section
s390/crashdump: fix TOD programmable field size
s390/ap: fix memory leak in ap_init_qci_info()
READ/WRITE proved to be actively confusing - the meanings are
"data destination, as used with read(2)" and "data source, as
used with write(2)", but people keep interpreting those as
"we read data from it" and "we write data to it", i.e. exactly
the wrong way.
Call them ITER_DEST and ITER_SOURCE - at least that is harder
to misinterpret...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
dasd_copy_relation->entry[] array might be accessed out of bounds if the
loop does not break.
Fixes: a91ff09d39 ("s390/dasd: add copy pair setup")
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20221123160719.3002694-5-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For DASD devices in raw_track_access mode only full track images are
read and written.
For this purpose it is not necessary to do search operation in the
locate record extended function. The documentation even states that
this might fail if the searched record is not found on a track.
Currently the driver sets a value of 1 in the search field for the first
record after record zero. This is the default for disks not in
raw_track_access mode but record 1 might be missing on a completely
empty track.
There has not been any problem with this on IBM storage servers but it
might lead to errors with DASD devices on other vendors storage servers.
Fix this by setting the search field to 0. Record zero is always available
even on a completely empty track.
Fixes: e4dbb0f2b5 ("[S390] dasd: Add support for raw ECKD access.")
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20221123160719.3002694-4-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
32 byte are to less for important data from prefix or
other commands.
Print up to 128 byte data. This is enough for the largest
CCW data we have.
Since printk can only print up to 1024 byte at once, print the
different parts of the CCW dumps separately.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20221123160719.3002694-3-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If kzalloc() for 'ap_qci_info_old' failed, 'ap_qci_info' shold be
freed before return. Otherwise it is a memory leak.
Link: https://lore.kernel.org/r/20221114110830.542246-1-weiyongjun@huaweicloud.com
Fixes: 283915850a ("s390/ap: notify drivers on config changed and scan complete callbacks")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
If CONFIG_TN3270_CONSOLE is not enabled clang emits the following warning:
drivers/s390/char/raw3270.c:114:19:
error: unused function 'raw3270_state_final' [-Werror,-Wunused-function]
static inline int raw3270_state_final(struct raw3270 *rp)
Get rid of this warning by making raw3270_state_final() only
available if CONFIG_TN3270_CONSOLE is enabled.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Fix virtual vs physical address confusion (which currently are the same)
for the GISA when enabling the IRQ.
Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20221118100429.70453-1-nrb@linux.ibm.com
Message-Id: <20221118100429.70453-1-nrb@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
dma_alloc_coherent is an opaque allocator that only uses the GFP_ flags
for allocation context control. Don't pass __GFP_COMP which makes no
sense for an allocation that can't in any way be converted to a page
pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Wenjia Zhang <wenjia@linux.ibm.com>
Five small fixes, all in drivers. Most of these are error leg freeing
issues, with the only really user visible one being the zfcp fix.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCY3lYZyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishflGAPwIJV0F
42sRod5/ULPVh3YRtSzUWwhVqSxlxN6eAaZJbgD/fcPsIa96WCtSYjevLPc+afDh
Ecb5nfwbA8cc9cjqmS8=
=NNYw
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Five small fixes, all in drivers.
Most of these are error leg freeing issues, with the only really user
visible one being the zfcp fix"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: iscsi: Fix possible memory leak when device_register() failed
scsi: zfcp: Fix double free of FSF request when qdio send fails
scsi: scsi_debug: Fix possible UAF in sdebug_add_host_helper()
scsi: target: tcm_loop: Fix possible name leak in tcm_loop_setup_hba_bus()
scsi: mpi3mr: Suppress command reply debug prints
Most hw_random devices return entropy which is assumed to be of full
quality, but driver authors don't bother setting the quality knob. Some
hw_random devices return less than full quality entropy, and then driver
authors set the quality knob. Therefore, the entropy crediting should be
opt-out rather than opt-in per-driver, to reflect the actual reality on
the ground.
For example, the two Raspberry Pi RNG drivers produce full entropy
randomness, and both EDK2 and U-Boot's drivers for these treat them as
such. The result is that EFI then uses these numbers and passes the to
Linux, and Linux credits them as boot, thereby initializing the RNG.
Yet, in Linux, the quality knob was never set to anything, and so on the
chance that Linux is booted without EFI, nothing is ever credited.
That's annoying.
The same pattern appears to repeat itself throughout various drivers. In
fact, very very few drivers have bothered setting quality=1024.
Looking at the git history of existing drivers and corresponding mailing
list discussion, this conclusion tracks. There's been a decent amount of
discussion about drivers that set quality < 1024 -- somebody read and
interepreted a datasheet, or made some back of the envelope calculation
somehow. But there's been very little, if any, discussion about most
drivers where the quality is just set to 1024 or unset (or set to 1000
when the authors misunderstood the API and assumed it was base-10 rather
than base-2); in both cases the intent was fairly clear of, "this is a
hardware random device; it's fine."
So let's invert this logic. A hw_random struct's quality knob now
controls the maximum quality a driver can produce, or 0 to specify 1024.
Then, the module-wide switch called "default_quality" is changed to
represent the maximum quality of any driver. By default it's 1024, and
the quality of any particular driver is then given by:
min(default_quality, rng->quality ?: 1024);
This way, the user can still turn this off for weird reasons (and we can
replace whatever driver-specific disabling hacks existed in the past),
yet we get proper crediting for relevant RNGs.
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This is a simple mechanical transformation done by:
@@
expression E;
@@
- prandom_u32_max
+ get_random_u32_below
(E)
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs
Reviewed-by: SeongJae Park <sj@kernel.org> # for damon
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> # for arm
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
We used to use the wrong type of integer in 'zfcp_fsf_req_send()' to cache
the FSF request ID when sending a new FSF request. This is used in case the
sending fails and we need to remove the request from our internal hash
table again (so we don't keep an invalid reference and use it when we free
the request again).
In 'zfcp_fsf_req_send()' we used to cache the ID as 'int' (signed and 32
bit wide), but the rest of the zfcp code (and the firmware specification)
handles the ID as 'unsigned long'/'u64' (unsigned and 64 bit wide [s390x
ELF ABI]). For one this has the obvious problem that when the ID grows
past 32 bit (this can happen reasonably fast) it is truncated to 32 bit
when storing it in the cache variable and so doesn't match the original ID
anymore. The second less obvious problem is that even when the original ID
has not yet grown past 32 bit, as soon as the 32nd bit is set in the
original ID (0x80000000 = 2'147'483'648) we will have a mismatch when we
cast it back to 'unsigned long'. As the cached variable is of a signed
type, the compiler will choose a sign-extending instruction to load the 32
bit variable into a 64 bit register (e.g.: 'lgf %r11,188(%r15)'). So once
we pass the cached variable into 'zfcp_reqlist_find_rm()' to remove the
request again all the leading zeros will be flipped to ones to extend the
sign and won't match the original ID anymore (this has been observed in
practice).
If we can't successfully remove the request from the hash table again after
'zfcp_qdio_send()' fails (this happens regularly when zfcp cannot notify
the adapter about new work because the adapter is already gone during
e.g. a ChpID toggle) we will end up with a double free. We unconditionally
free the request in the calling function when 'zfcp_fsf_req_send()' fails,
but because the request is still in the hash table we end up with a stale
memory reference, and once the zfcp adapter is either reset during recovery
or shutdown we end up freeing the same memory twice.
The resulting stack traces vary depending on the kernel and have no direct
correlation to the place where the bug occurs. Here are three examples that
have been seen in practice:
list_del corruption. next->prev should be 00000001b9d13800, but was 00000000dead4ead. (next=00000001bd131a00)
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:62!
monitor event: 0040 ilc:2 [#1] PREEMPT SMP
Modules linked in: ...
CPU: 9 PID: 1617 Comm: zfcperp0.0.1740 Kdump: loaded
Hardware name: ...
Krnl PSW : 0704d00180000000 00000003cbeea1f8 (__list_del_entry_valid+0x98/0x140)
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 RI:0 EA:3
Krnl GPRS: 00000000916d12f1 0000000080000000 000000000000006d 00000003cb665cd6
0000000000000001 0000000000000000 0000000000000000 00000000d28d21e8
00000000d3844000 00000380099efd28 00000001bd131a00 00000001b9d13800
00000000d3290100 0000000000000000 00000003cbeea1f4 00000380099efc70
Krnl Code: 00000003cbeea1e8: c020004f68a7 larl %r2,00000003cc8d7336
00000003cbeea1ee: c0e50027fd65 brasl %r14,00000003cc3e9cb8
#00000003cbeea1f4: af000000 mc 0,0
>00000003cbeea1f8: c02000920440 larl %r2,00000003cd12aa78
00000003cbeea1fe: c0e500289c25 brasl %r14,00000003cc3fda48
00000003cbeea204: b9040043 lgr %r4,%r3
00000003cbeea208: b9040051 lgr %r5,%r1
00000003cbeea20c: b9040032 lgr %r3,%r2
Call Trace:
[<00000003cbeea1f8>] __list_del_entry_valid+0x98/0x140
([<00000003cbeea1f4>] __list_del_entry_valid+0x94/0x140)
[<000003ff7ff502fe>] zfcp_fsf_req_dismiss_all+0xde/0x150 [zfcp]
[<000003ff7ff49cd0>] zfcp_erp_strategy_do_action+0x160/0x280 [zfcp]
[<000003ff7ff4a22e>] zfcp_erp_strategy+0x21e/0xca0 [zfcp]
[<000003ff7ff4ad34>] zfcp_erp_thread+0x84/0x1a0 [zfcp]
[<00000003cb5eece8>] kthread+0x138/0x150
[<00000003cb557f3c>] __ret_from_fork+0x3c/0x60
[<00000003cc4172ea>] ret_from_fork+0xa/0x40
INFO: lockdep is turned off.
Last Breaking-Event-Address:
[<00000003cc3e9d04>] _printk+0x4c/0x58
Kernel panic - not syncing: Fatal exception: panic_on_oops
or:
Unable to handle kernel pointer dereference in virtual kernel address space
Failing address: 6b6b6b6b6b6b6000 TEID: 6b6b6b6b6b6b6803
Fault in home space mode while using kernel ASCE.
AS:0000000063b10007 R3:0000000000000024
Oops: 0038 ilc:3 [#1] SMP
Modules linked in: ...
CPU: 10 PID: 0 Comm: swapper/10 Kdump: loaded
Hardware name: ...
Krnl PSW : 0404d00180000000 000003ff7febaf8e (zfcp_fsf_reqid_check+0x86/0x158 [zfcp])
R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 RI:0 EA:3
Krnl GPRS: 5a6f1cfa89c49ac3 00000000aff2c4c8 6b6b6b6b6b6b6b6b 00000000000002a8
0000000000000000 0000000000000055 0000000000000000 00000000a8515800
0700000000000000 00000000a6e14500 00000000aff2c000 000000008003c44c
000000008093c700 0000000000000010 00000380009ebba8 00000380009ebb48
Krnl Code: 000003ff7febaf7e: a7f4003d brc 15,000003ff7febaff8
000003ff7febaf82: e32020000004 lg %r2,0(%r2)
#000003ff7febaf88: ec2100388064 cgrj %r2,%r1,8,000003ff7febaff8
>000003ff7febaf8e: e3b020100020 cg %r11,16(%r2)
000003ff7febaf94: a774fff7 brc 7,000003ff7febaf82
000003ff7febaf98: ec280030007c cgij %r2,0,8,000003ff7febaff8
000003ff7febaf9e: e31020080004 lg %r1,8(%r2)
000003ff7febafa4: e33020000004 lg %r3,0(%r2)
Call Trace:
[<000003ff7febaf8e>] zfcp_fsf_reqid_check+0x86/0x158 [zfcp]
[<000003ff7febbdbc>] zfcp_qdio_int_resp+0x6c/0x170 [zfcp]
[<000003ff7febbf90>] zfcp_qdio_irq_tasklet+0xd0/0x108 [zfcp]
[<0000000061d90a04>] tasklet_action_common.constprop.0+0xdc/0x128
[<000000006292f300>] __do_softirq+0x130/0x3c0
[<0000000061d906c6>] irq_exit_rcu+0xfe/0x118
[<000000006291e818>] do_io_irq+0xc8/0x168
[<000000006292d516>] io_int_handler+0xd6/0x110
[<000000006292d596>] psw_idle_exit+0x0/0xa
([<0000000061d3be50>] arch_cpu_idle+0x40/0xd0)
[<000000006292ceea>] default_idle_call+0x52/0xf8
[<0000000061de4fa4>] do_idle+0xd4/0x168
[<0000000061de51fe>] cpu_startup_entry+0x36/0x40
[<0000000061d4faac>] smp_start_secondary+0x12c/0x138
[<000000006292d88e>] restart_int_handler+0x6e/0x90
Last Breaking-Event-Address:
[<000003ff7febaf94>] zfcp_fsf_reqid_check+0x8c/0x158 [zfcp]
Kernel panic - not syncing: Fatal exception in interrupt
or:
Unable to handle kernel pointer dereference in virtual kernel address space
Failing address: 523b05d3ae76a000 TEID: 523b05d3ae76a803
Fault in home space mode while using kernel ASCE.
AS:0000000077c40007 R3:0000000000000024
Oops: 0038 ilc:3 [#1] SMP
Modules linked in: ...
CPU: 3 PID: 453 Comm: kworker/3:1H Kdump: loaded
Hardware name: ...
Workqueue: kblockd blk_mq_run_work_fn
Krnl PSW : 0404d00180000000 0000000076fc0312 (__kmalloc+0xd2/0x398)
R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 RI:0 EA:3
Krnl GPRS: ffffffffffffffff 523b05d3ae76abf6 0000000000000000 0000000000092a20
0000000000000002 00000007e49b5cc0 00000007eda8f000 0000000000092a20
00000007eda8f000 00000003b02856b9 00000000000000a8 523b05d3ae76abf6
00000007dd662000 00000007eda8f000 0000000076fc02b2 000003e0037637a0
Krnl Code: 0000000076fc0302: c004000000d4 brcl 0,76fc04aa
0000000076fc0308: b904001b lgr %r1,%r11
#0000000076fc030c: e3106020001a algf %r1,32(%r6)
>0000000076fc0312: e31010000082 xg %r1,0(%r1)
0000000076fc0318: b9040001 lgr %r0,%r1
0000000076fc031c: e30061700082 xg %r0,368(%r6)
0000000076fc0322: ec59000100d9 aghik %r5,%r9,1
0000000076fc0328: e34003b80004 lg %r4,952
Call Trace:
[<0000000076fc0312>] __kmalloc+0xd2/0x398
[<0000000076f318f2>] mempool_alloc+0x72/0x1f8
[<000003ff8027c5f8>] zfcp_fsf_req_create.isra.7+0x40/0x268 [zfcp]
[<000003ff8027f1bc>] zfcp_fsf_fcp_cmnd+0xac/0x3f0 [zfcp]
[<000003ff80280f1a>] zfcp_scsi_queuecommand+0x122/0x1d0 [zfcp]
[<000003ff800b4218>] scsi_queue_rq+0x778/0xa10 [scsi_mod]
[<00000000771782a0>] __blk_mq_try_issue_directly+0x130/0x208
[<000000007717a124>] blk_mq_request_issue_directly+0x4c/0xa8
[<000003ff801302e2>] dm_mq_queue_rq+0x2ea/0x468 [dm_mod]
[<0000000077178c12>] blk_mq_dispatch_rq_list+0x33a/0x818
[<000000007717f064>] __blk_mq_do_dispatch_sched+0x284/0x2f0
[<000000007717f44c>] __blk_mq_sched_dispatch_requests+0x1c4/0x218
[<000000007717fa7a>] blk_mq_sched_dispatch_requests+0x52/0x90
[<0000000077176d74>] __blk_mq_run_hw_queue+0x9c/0xc0
[<0000000076da6d74>] process_one_work+0x274/0x4d0
[<0000000076da7018>] worker_thread+0x48/0x560
[<0000000076daef18>] kthread+0x140/0x160
[<000000007751d144>] ret_from_fork+0x28/0x30
Last Breaking-Event-Address:
[<0000000076fc0474>] __kmalloc+0x234/0x398
Kernel panic - not syncing: Fatal exception: panic_on_oops
To fix this, simply change the type of the cache variable to 'unsigned
long', like the rest of zfcp and also the argument for
'zfcp_reqlist_find_rm()'. This prevents truncation and wrong sign extension
and so can successfully remove the request from the hash table.
Fixes: e60a6d69f1 ("[SCSI] zfcp: Remove function zfcp_reqlist_find_safe")
Cc: <stable@vger.kernel.org> #v2.6.34+
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Link: https://lore.kernel.org/r/979f6e6019d15f91ba56182f1aaf68d61bf37fc6.1668595505.git.bblock@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
After the rework from commit 1ebe2e5f9d ("block: remove
GENHD_FL_EXT_DEVT"), when calling device_add_disk(), dcssblk will end up
in disk_scan_partitions(), and not break out early w/o GENHD_FL_NO_PART.
This will trigger implicit open/release via blkdev_get/put_whole()
later. dcssblk_release() will then deadlock on dcssblk_devices_sem
semaphore, which is already held from dcssblk_add_store() when calling
device_add_disk().
dcssblk does not support partitions (DCSSBLK_MINORS_PER_DISK == 1), and
never scanned partitions before. Therefore restore the previous
behavior, and explicitly disallow partition scanning by setting the
GENHD_FL_NO_PART flag. This will also prevent this deadlock scenario.
Fixes: 1ebe2e5f9d ("block: remove GENHD_FL_EXT_DEVT")
Cc: <stable@vger.kernel.org> # 5.17+
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
With the "mess" sorted out, we should be able to inline the
vfio_free_device call introduced by commit cb9ff3f3b8
("vfio: Add helpers for unifying vfio_device life cycle")
and remove them from driver release callbacks.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com> # vfio-ap part
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20221104142007.1314999-8-farman@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Now that we have a reasonable separation of structs that follow
the subchannel and mdev lifecycles, there's no reason we can't
call the official vfio_alloc_device routine for our private data,
and behave like everyone else.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20221104142007.1314999-7-farman@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
There's enough separation between the parent and private structs now,
that it is fine to remove the release completion hack.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20221104142007.1314999-6-farman@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Now that the mdev parent data is split out into its own struct,
it is safe to move the remaining private data to follow the
mdev probe/remove lifecycle. The mdev parent data will remain
where it is, and follow the subchannel and the css driver
interfaces.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20221104142007.1314999-5-farman@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
There's already a device initialization callback that is used to
initialize the release completion workaround that was introduced
by commit ebb72b765f ("vfio/ccw: Use the new device life cycle
helpers").
Move the other elements of the vfio_ccw_private struct that
require distinct initialization over to that routine.
With that done, the vfio_ccw_alloc_private routine only does a
kzalloc, so fold it inline.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20221104142007.1314999-4-farman@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
These places all rely on the ability to jump from a private
struct back to the subchannel struct. Rather than keeping a
copy in our back pocket, let's use the relationship provided
by the vfio_device embedded within the private.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20221104142007.1314999-3-farman@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Move the stuff associated with the mdev parent (and thus the
subchannel struct) into its own struct, and leave the rest in
the existing private structure.
The subchannel will point to the parent, and the parent will point
to the private, for the areas where one or both are needed. Further
separation of these structs will follow.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20221104142007.1314999-2-farman@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:
drivers/s390/net/lcs.c:2090:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict]
.ndo_start_xmit = lcs_start_xmit,
^~~~~~~~~~~~~~
drivers/s390/net/lcs.c:2097:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict]
.ndo_start_xmit = lcs_start_xmit,
^~~~~~~~~~~~~~
->ndo_start_xmit() in 'struct net_device_ops' expects a return type of
'netdev_tx_t', not 'int'. Adjust the return type of lcs_start_xmit() to
match the prototype's to resolve the warning and potential CFI failure,
should s390 select ARCH_SUPPORTS_CFI_CLANG in the future.
Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:
drivers/s390/net/netiucv.c:1854:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict]
.ndo_start_xmit = netiucv_tx,
^~~~~~~~~~
->ndo_start_xmit() in 'struct net_device_ops' expects a return type of
'netdev_tx_t', not 'int'. Adjust the return type of netiucv_tx() to
match the prototype's to resolve the warning and potential CFI failure,
should s390 select ARCH_SUPPORTS_CFI_CLANG in the future.
Additionally, while in the area, remove a comment block that is no
longer relevant.
Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:
drivers/s390/net/ctcm_main.c:1064:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict]
.ndo_start_xmit = ctcm_tx,
^~~~~~~
drivers/s390/net/ctcm_main.c:1072:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict]
.ndo_start_xmit = ctcmpc_tx,
^~~~~~~~~
->ndo_start_xmit() in 'struct net_device_ops' expects a return type of
'netdev_tx_t', not 'int'. Adjust the return type of ctc{mp,}m_tx() to
match the prototype's to resolve the warning and potential CFI failure,
should s390 select ARCH_SUPPORTS_CFI_CLANG in the future.
Additionally, while in the area, remove a comment block that is no
longer relevant.
Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes the warning
memcpy: detected field-spanning write (size 60) of single field "to" at drivers/s390/crypto/zcrypt_api.h:173 (size 2)
WARNING: CPU: 1 PID: 2114 at drivers/s390/crypto/zcrypt_api.h:173 prep_ep11_ap_msg+0x2c6/0x2e0 [zcrypt]
The code has been rewritten to use a union in combination
with a flex array to clearly state which part of the buffer
the payload is to be copied in via z_copy_from_user
function (which may call memcpy() in case of in-kernel calls).
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Suggested-by: Jürgen Christ <jchrist@linux.ibm.com>
Reviewed-by: Jürgen Christ <jchrist@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The vfio-ap crypto driver fails to allocate memory for an array of
pointers used to pass supported mdev types to mdev_register_parent().
Since we only support a single mdev type, the fix is to allocate a
single entry in the ap_matrix_dev->mdev_types array.
Link: https://lore.kernel.org/r/20221021145905.15100-1-jjherne@linux.ibm.com
Fixes: da44c340c4 ("vfio/mdev: simplify mdev_type handling")
Cc: stable@vger.kernel.org
Cc: Tony Krowiak <akrowiak@linux.ibm.com>
Reported-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The channel-subsystem-driver scans for newly available devices whenever
device-IDs are removed from the cio_ignore list using a command such as:
echo free >/proc/cio_ignore
Since an I/O device scan might interfer with running I/Os, commit
172da89ed0 ("s390/cio: avoid excessive path-verification requests")
introduced an optimization to exclude online devices from the scan.
The newly added check for online devices incorrectly assumes that
an I/O-subchannel's drvdata points to a struct io_subchannel_private.
For devices that are bound to a non-default I/O subchannel driver, such
as the vfio_ccw driver, this results in an out-of-bounds read access
during each scan.
Fix this by changing the scan logic to rely on a driver-independent
online indication. For this we can use struct subchannel->config.ena,
which is the driver's requested subchannel-enabled state. Since I/Os
can only be started on enabled subchannels, this matches the intent
of the original optimization of not scanning devices where I/O might
be running.
Fixes: 172da89ed0 ("s390/cio: avoid excessive path-verification requests")
Fixes: 0c3812c347 ("s390/cio: derive cdev information only for IO-subchannels")
Cc: <stable@vger.kernel.org> # v5.15
Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Adjust white space according to coding guidelines.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Using z/VM the 3270 terminal emulator also emulates an IBM 3215 console
which outputs line by line. When the screen is full, the console enters
the MORE... state and waits for the operator to confirm the data
on the screen by pressing a clear key. If this does not happen in the
default time frame (currently 50 seconds) the console enters the HOLDING
state.
It then waits another time frame (currently 10 seconds) before the output
continues on the next screen. When the operator presses the clear key
during these wait times, the output continues immediately.
This may lead to a very long boot time when the console
has to print many messages, also the system may hang because of the
console's limited buffer space and the system waits for the console
output to drain and finally to finish. This problem can only occur
when a terminal emulator is actually connected to the 3215 console
driver. If not z/VM simply drops console output.
Remedy this rare situation and add a kernel boot command line parameter
con3215_drop. It can be set to 0 (do not drop) or 1 (do drop) which is
the default. This instructs the kernel drop console data when the
console buffer is full. This speeds up the boot time considerable and
also does not hang the system anymore.
Add a sysfs attribute file for console IBM 3215 named con_drop.
This allows for changing the behavior after the boot, for example when
during interactive debugging a panic/crash is expected.
Here is a test of the new behavior using the following test program:
#/bin/bash
declare -i cnt=4
mode=$(cat /sys/bus/ccw/drivers/3215/con_drop)
[ $mode = yes ] && cnt=25
echo "cons_drop $(cat /sys/bus/ccw/drivers/3215/con_drop)"
echo "vmcp term more 5 2"
vmcp term more 5 2
echo "Run $cnt iterations of "'echo t > /proc/sysrq-trigger'
for i in $(seq $cnt)
do
echo "$i. command 'echo t > /proc/sysrq-trigger' at $(date +%F,%T)"
echo t > /proc/sysrq-trigger
sleep 1
done
echo "droptest done" > /dev/kmsg
#
Output with sysfs attribute con_drop set to 1:
# ./droptest.sh
cons_drop yes
vmcp term more 5 2
Run 25 iterations of echo t > /proc/sysrq-trigger
1. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:09
2. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:10
3. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:11
4. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:12
5. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:13
6. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:14
7. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:15
8. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:16
9. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:17
10. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:18
11. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:19
12. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:20
13. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:21
14. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:22
15. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:23
16. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:24
17. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:25
18. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:26
19. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:27
20. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:28
21. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:29
22. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:30
23. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:31
24. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:32
25. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:33
#
There are no hangs anymore.
Output with sysfs attribute con_drop set to 0 and identical
setting for z/VM console 'term more 5 2'. Sometimes hitting the
clear key at the x3270 console to progress output.
# ./droptest.sh
cons_drop no
vmcp term more 5 2
Run 4 iterations of echo t > /proc/sysrq-trigger
1. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:20:58
2. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:24:32
3. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:28:04
4. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:31:37
#
Details:
Enable function raw3215_write() to handle tab expansion and newlines
and feed it with input not larger than the console buffer of 65536
bytes. Function raw3125_putchar() just forwards its character for
output to raw3215_write().
This moves tab to blank conversion to one function raw3215_write()
which also does call raw3215_make_room() to wait for enough free
buffer space.
Function handle_write() loops over all its input and segments input
into chunks of console buffer size (should the input be larger).
Rework tab expansion handling logic to avoid code duplication.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The functions con3215_write() and tty3215_write() have nearly
identical function bodies and a slightly different function prototype.
Create function handle_write() to handle the common function
body and maintain the function prototypes.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
- Generate a change uevent on unsolicited device end I/O interrupt for z/VM
unit record devices supported by the vmur driver. This event can be used to
automatically trigger processing of files as they arrive in the z/VM reader.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmNJnhgACgkQjYWKoQLX
FBiTLAf+NJ2nky15kmDq3ZMc4lRzSqhq8wd4Y+PBjIDZykQGonufwY03ppQuHoxW
6c9/gG1MS4fBlaOqP7a17v381kytnGjKXufDvIQy/O5ZZkLQk9LFFqJYVWU39O1x
VqFMvUgNhnS6yH2ERQWm18nUgFTz1nCAVobf4uzJgHbrWHn5Tq/idcoCnlzSfOTW
h8iRlsChKM8f4WrKsSuK7lmlD7mm25Z7jePnIb436nd/HqsmSj6MDuB6Ap4EY5qp
6IMdSClMi3FBrlT+9kvn9vM2yCUFiMMBxd7nLGaeAlL2vXjW+uuHAgn4SqoLl6MH
SWAEGWDY+V7NHy+XolzjE/fpOdD9Ww==
=4O+h
-----END PGP SIGNATURE-----
Merge tag 's390-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Vasily Gorbik:
- Generate a change uevent on unsolicited device end I/O interrupt for
z/VM unit record devices supported by the vmur driver. This event can
be used to automatically trigger processing of files as they arrive
in the z/VM reader.
* tag 's390-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/vmur: generate uevent on unsolicited device end
s390/vmur: remove unnecessary BUG statement
- Prune private items from vfio_pci_core.h to a new internal header,
fix missed function rename, and refactor vfio-pci interrupt defines.
(Jason Gunthorpe)
- Create consistent naming and handling of ioctls with a function per
ioctl for vfio-pci and vfio group handling, use proper type args
where available. (Jason Gunthorpe)
- Implement a set of low power device feature ioctls allowing userspace
to make use of power states such as D3cold where supported.
(Abhishek Sahu)
- Remove device counter on vfio groups, which had restricted the page
pinning interface to singleton groups to account for limitations in
the type1 IOMMU backend. Document usage as limited to emulated IOMMU
devices, ie. traditional mdev devices where this restriction is
consistent. (Jason Gunthorpe)
- Correct function prefix in hisi_acc driver incurred during previous
refactoring. (Shameer Kolothum)
- Correct typo and remove redundant warning triggers in vfio-fsl driver.
(Christophe JAILLET)
- Introduce device level DMA dirty tracking uAPI and implementation in
the mlx5 variant driver (Yishai Hadas & Joao Martins)
- Move much of the vfio_device life cycle management into vfio core,
simplifying and avoiding duplication across drivers. This also
facilitates adding a struct device to vfio_device which begins the
introduction of device rather than group level user support and fills
a gap allowing userspace identify devices as vfio capable without
implicit knowledge of the driver. (Kevin Tian & Yi Liu)
- Split vfio container handling to a separate file, creating a more
well defined API between the core and container code, masking IOMMU
backend implementation from the core, allowing for an easier future
transition to an iommufd based implementation of the same.
(Jason Gunthorpe)
- Attempt to resolve race accessing the iommu_group for a device
between vfio releasing DMA ownership and removal of the device from
the IOMMU driver. Follow-up with support to allow vfio_group to
exist with NULL iommu_group pointer to support existing userspace
use cases of holding the group file open. (Jason Gunthorpe)
- Fix error code and hi/lo register manipulation issues in the hisi_acc
variant driver, along with various code cleanups. (Longfang Liu)
- Fix a prior regression in GVT-g group teardown, resulting in
unreleased resources. (Jason Gunthorpe)
- A significant cleanup and simplification of the mdev interface,
consolidating much of the open coded per driver sysfs interface
support into the mdev core. (Christoph Hellwig)
- Simplification of tracking and locking around vfio_groups that
fall out from previous refactoring. (Jason Gunthorpe)
- Replace trivial open coded f_ops tests with new helper.
(Alex Williamson)
-----BEGIN PGP SIGNATURE-----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=Z8+P
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.1-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Prune private items from vfio_pci_core.h to a new internal header,
fix missed function rename, and refactor vfio-pci interrupt defines
(Jason Gunthorpe)
- Create consistent naming and handling of ioctls with a function per
ioctl for vfio-pci and vfio group handling, use proper type args
where available (Jason Gunthorpe)
- Implement a set of low power device feature ioctls allowing userspace
to make use of power states such as D3cold where supported (Abhishek
Sahu)
- Remove device counter on vfio groups, which had restricted the page
pinning interface to singleton groups to account for limitations in
the type1 IOMMU backend. Document usage as limited to emulated IOMMU
devices, ie. traditional mdev devices where this restriction is
consistent (Jason Gunthorpe)
- Correct function prefix in hisi_acc driver incurred during previous
refactoring (Shameer Kolothum)
- Correct typo and remove redundant warning triggers in vfio-fsl driver
(Christophe JAILLET)
- Introduce device level DMA dirty tracking uAPI and implementation in
the mlx5 variant driver (Yishai Hadas & Joao Martins)
- Move much of the vfio_device life cycle management into vfio core,
simplifying and avoiding duplication across drivers. This also
facilitates adding a struct device to vfio_device which begins the
introduction of device rather than group level user support and fills
a gap allowing userspace identify devices as vfio capable without
implicit knowledge of the driver (Kevin Tian & Yi Liu)
- Split vfio container handling to a separate file, creating a more
well defined API between the core and container code, masking IOMMU
backend implementation from the core, allowing for an easier future
transition to an iommufd based implementation of the same (Jason
Gunthorpe)
- Attempt to resolve race accessing the iommu_group for a device
between vfio releasing DMA ownership and removal of the device from
the IOMMU driver. Follow-up with support to allow vfio_group to exist
with NULL iommu_group pointer to support existing userspace use cases
of holding the group file open (Jason Gunthorpe)
- Fix error code and hi/lo register manipulation issues in the hisi_acc
variant driver, along with various code cleanups (Longfang Liu)
- Fix a prior regression in GVT-g group teardown, resulting in
unreleased resources (Jason Gunthorpe)
- A significant cleanup and simplification of the mdev interface,
consolidating much of the open coded per driver sysfs interface
support into the mdev core (Christoph Hellwig)
- Simplification of tracking and locking around vfio_groups that fall
out from previous refactoring (Jason Gunthorpe)
- Replace trivial open coded f_ops tests with new helper (Alex
Williamson)
* tag 'vfio-v6.1-rc1' of https://github.com/awilliam/linux-vfio: (77 commits)
vfio: More vfio_file_is_group() use cases
vfio: Make the group FD disassociate from the iommu_group
vfio: Hold a reference to the iommu_group in kvm for SPAPR
vfio: Add vfio_file_is_group()
vfio: Change vfio_group->group_rwsem to a mutex
vfio: Remove the vfio_group->users and users_comp
vfio/mdev: add mdev available instance checking to the core
vfio/mdev: consolidate all the description sysfs into the core code
vfio/mdev: consolidate all the available_instance sysfs into the core code
vfio/mdev: consolidate all the name sysfs into the core code
vfio/mdev: consolidate all the device_api sysfs into the core code
vfio/mdev: remove mtype_get_parent_dev
vfio/mdev: remove mdev_parent_dev
vfio/mdev: unexport mdev_bus_type
vfio/mdev: remove mdev_from_dev
vfio/mdev: simplify mdev_type handling
vfio/mdev: embedd struct mdev_parent in the parent data structure
vfio/mdev: make mdev.h standalone includable
drm/i915/gvt: simplify vgpu configuration management
drm/i915/gvt: fix a memory leak in intel_gvt_init_vgpu_types
...
When a traditional channel-attached device transitions from not-ready to
ready state, an unsolicited DEVICE END I/O interrupt is raised. This
happens for example when a new file arrives in the z/VM virtual reader
device.
Change the Linux kernel to generate a change uevent when such an
interrupt occurs for any online unit record devices supported by the
vmur driver. This can be useful to automatically trigger processing of
files as they arrive in the reader device.
A sample udev rule for running a program when this event occurs looks as
follows:
ENV{DRIVER}=="vmur", ACTION=="change", ENV{EVENT}=="unsol_de", \
RUN{program}="/path/to/program"
The rule can be tested using the following steps:
1. Set reader device online (assuming default reader device number 000c)
$ chzdev -ea 0.0.000c
2. Force a ready-state transition using z/VM's READY CP command
$ vmcp ready 000c
Suggested-by: Alan Altmark <Alan_Altmark@us.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
An existing BUG statement in vmur's interrupt handler triggers if:
1. An online vmur device is removed (e.g. due to driver unload, manual
unbind or channel-report words indicating hypervisor-side device
removal)
2. Device deactivation fails due to firmware/hypervisor error, leaving
subchannel enabled for interrupts + drvdata=NULL
3. Interrupt occurs
This situation is highly unlikely and not a clear indication of a
general system error that would warrant stopping the full Linux system.
Also it can be prevented completely by clearing the interrupt handler
when unsetting a vmur device's drvdata.
Replace the BUG statement in vmur's interrupt handler by clearing the
interrupt handler callback during device removal. Also move the initial
setting of the interrupt handler callback under lock for consistency
reasons.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
- Make use of the IBM z16 processor activity instrumentation facility
extension to count neural network processor assist operations: add a new
PMU device driver so that perf can make use of this.
- Rework memcpy_real() to avoid DAT-off mode.
- Rework absolute lowcore access code.
- Various small fixes and improvements all over the code.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmNB0rUACgkQjYWKoQLX
FBjIwAgAkxPvjr50iK5/exlZR7S2bcEwoCKBUX+D7563SE4jQQp3o5Gt2MZ3hdL0
IKRkPPA/xRV0W7Oj57SvU4xXvxeXINoCPsQQlLrHg77L6B3TlWpmVWXjseunMyfM
zhZTbv1sZ/XcdrnRwMq3P5fb8TnNHiU0/6lBz4Efi92K5NerQ0JBY7w7xbrZwiXD
2R6ZpokXNcaBBtaETpu+PWu6QXyUOpvIeT+b6DG+4/ud2GmY7KNM75l2lzgWXajh
7yHTLTkQTvUF+3jZS2JiRm9rrH/FY3X5PXVg17Q10KmzmVXp5WT75pVyDEuUq0a8
nOj2QsFSX/xDJTcPvrAWZxMuxzLtRg==
=6LMp
-----END PGP SIGNATURE-----
Merge tag 's390-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Make use of the IBM z16 processor activity instrumentation facility
extension to count neural network processor assist operations: add a
new PMU device driver so that perf can make use of this.
- Rework memcpy_real() to avoid DAT-off mode.
- Rework absolute lowcore access code.
- Various small fixes and improvements all over the code.
* tag 's390-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/pci: remove unused bus_next field from struct zpci_dev
s390/cio: remove unused ccw_device_force_console() declaration
s390/pai: Add support for PAI Extension 1 NNPA counters
s390/mm: fix no previous prototype warnings in maccess.c
s390/mm: uninline copy_oldmem_kernel() function
s390/mm,ptdump: add real memory copy page markers
s390/mm: rework memcpy_real() to avoid DAT-off mode
s390/dump: save IPL CPU registers once DAT is available
s390/pci: convert high_memory to physical address
s390/smp,ptdump: add absolute lowcore markers
s390/smp: rework absolute lowcore access
s390/smp: call smp_reinit_ipl_cpu() before scheduler is available
s390/ptdump: add missing amode31 markers
s390/mm: split lowcore pages with set_memory_4k()
s390/mm: remove unused access parameter from do_fault_error()
s390/delay: sync comment within __delay() with reality
s390: move from strlcpy with unused retval to strscpy
Here is the big set of TTY and Serial driver updates for 6.1-rc1.
Lots of cleanups in here, no real new functionality this time around,
with the diffstat being that we removed more lines than we added!
Included in here are:
- termios unification cleanups from Al Viro, it's nice to
finally get this work done
- tty serial transmit cleanups in various drivers in preparation
for more cleanup and unification in future releases (that work
was not ready for this release.)
- n_gsm fixes and updates
- ktermios cleanups and code reductions
- dt bindings json conversions and updates for new devices
- some serial driver updates for new devices
- lots of other tiny cleanups and janitorial stuff. Full
details in the shortlog.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY0BSdA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylucQCfaXIrYuh2AHcb6+G+Nqp1xD2BYaEAoIdLyOCA
a2yziLrDF6us2oav6j4x
=Wv+X
-----END PGP SIGNATURE-----
Merge tag 'tty-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the big set of TTY and Serial driver updates for 6.1-rc1.
Lots of cleanups in here, no real new functionality this time around,
with the diffstat being that we removed more lines than we added!
Included in here are:
- termios unification cleanups from Al Viro, it's nice to finally get
this work done
- tty serial transmit cleanups in various drivers in preparation for
more cleanup and unification in future releases (that work was not
ready for this release)
- n_gsm fixes and updates
- ktermios cleanups and code reductions
- dt bindings json conversions and updates for new devices
- some serial driver updates for new devices
- lots of other tiny cleanups and janitorial stuff. Full details in
the shortlog.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (102 commits)
serial: cpm_uart: Don't request IRQ too early for console port
tty: serial: do unlock on a common path in altera_jtaguart_console_putc()
tty: serial: unify TX space reads under altera_jtaguart_tx_space()
tty: serial: use FIELD_GET() in lqasc_tx_ready()
tty: serial: extend lqasc_tx_ready() to lqasc_console_putchar()
tty: serial: allow pxa.c to be COMPILE_TESTed
serial: stm32: Fix unused-variable warning
tty: serial: atmel: Add COMMON_CLK dependency to SERIAL_ATMEL
serial: 8250: Fix restoring termios speed after suspend
serial: Deassert Transmit Enable on probe in driver-specific way
serial: 8250_dma: Convert to use uart_xmit_advance()
serial: 8250_omap: Convert to use uart_xmit_advance()
MAINTAINERS: Solve warning regarding inexistent atmel-usart binding
serial: stm32: Deassert Transmit Enable on ->rs485_config()
serial: ar933x: Deassert Transmit Enable on ->rs485_config()
tty: serial: atmel: Use FIELD_PREP/FIELD_GET
tty: serial: atmel: Make the driver aware of the existence of GCLK
tty: serial: atmel: Only divide Clock Divisor if the IP is USART
tty: serial: atmel: Separate mode clearing between UART and USART
dt-bindings: serial: atmel,at91-usart: Add gclk as a possible USART clock
...
-----BEGIN PGP SIGNATURE-----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=R05e
-----END PGP SIGNATURE-----
Merge tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe pull requests via Christoph:
- handle number of queue changes in the TCP and RDMA drivers
(Daniel Wagner)
- allow changing the number of queues in nvmet (Daniel Wagner)
- also consider host_iface when checking ip options (Daniel
Wagner)
- don't map pages which can't come from HIGHMEM (Fabio M. De
Francesco)
- avoid unnecessary flush bios in nvmet (Guixin Liu)
- shrink and better pack the nvme_iod structure (Keith Busch)
- add comment for unaligned "fake" nqn (Linjun Bao)
- print actual source IP address through sysfs "address" attr
(Martin Belanger)
- various cleanups (Jackie Liu, Wolfram Sang, Genjian Zhang)
- handle effects after freeing the request (Keith Busch)
- copy firmware_rev on each init (Keith Busch)
- restrict management ioctls to admin (Keith Busch)
- ensure subsystem reset is single threaded (Keith Busch)
- report the actual number of tagset maps in nvme-pci (Keith
Busch)
- small fabrics authentication fixups (Christoph Hellwig)
- add common code for tagset allocation and freeing (Christoph
Hellwig)
- stop using the request_queue in nvmet (Christoph Hellwig)
- set min_align_mask before calculating max_hw_sectors (Rishabh
Bhatnagar)
- send a rediscover uevent when a persistent discovery controller
reconnects (Sagi Grimberg)
- misc nvmet-tcp fixes (Varun Prakash, zhenwei pi)
- MD pull request via Song:
- Various raid5 fix and clean up, by Logan Gunthorpe and David
Sloan.
- Raid10 performance optimization, by Yu Kuai.
- sbitmap wakeup hang fixes (Hugh, Keith, Jan, Yu)
- IO scheduler switching quisce fix (Keith)
- s390/dasd block driver updates (Stefan)
- support for recovery for the ublk driver (ZiyangZhang)
- rnbd drivers fixes and updates (Guoqing, Santosh, ye, Christoph)
- blk-mq and null_blk map fixes (Bart)
- various bcache fixes (Coly, Jilin, Jules)
- nbd signal hang fix (Shigeru)
- block writeback throttling fix (Yu)
- optimize the passthrough mapping handling (me)
- prepare block cgroups to being gendisk based (Christoph)
- get rid of an old PSI hack in the block layer, moving it to the
callers instead where it belongs (Christoph)
- blk-throttle fixes and cleanups (Yu)
- misc fixes and cleanups (Liu Shixin, Liu Song, Miaohe, Pankaj,
Ping-Xiang, Wolfram, Saurabh, Li Jinlin, Li Lei, Lin, Li zeming,
Miaohe, Bart, Coly, Gaosheng
* tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linux: (162 commits)
sbitmap: fix lockup while swapping
block: add rationale for not using blk_mq_plug() when applicable
block: adapt blk_mq_plug() to not plug for writes that require a zone lock
s390/dasd: use blk_mq_alloc_disk
blk-cgroup: don't update the blkg lookup hint in blkg_conf_prep
nvmet: don't look at the request_queue in nvmet_bdev_set_limits
nvmet: don't look at the request_queue in nvmet_bdev_zone_mgmt_emulate_all
blk-mq: use quiesced elevator switch when reinitializing queues
block: replace blk_queue_nowait with bdev_nowait
nvme: remove nvme_ctrl_init_connect_q
nvme-loop: use the tagset alloc/free helpers
nvme-loop: store the generic nvme_ctrl in set->driver_data
nvme-loop: initialize sqsize later
nvme-fc: use the tagset alloc/free helpers
nvme-fc: store the generic nvme_ctrl in set->driver_data
nvme-fc: keep ctrl->sqsize in sync with opts->queue_size
nvme-rdma: use the tagset alloc/free helpers
nvme-rdma: store the generic nvme_ctrl in set->driver_data
nvme-tcp: use the tagset alloc/free helpers
nvme-tcp: store the generic nvme_ctrl in set->driver_data
...
Many of the mdev drivers use a simple counter for keeping track of the
available instances. Move this code to the core code and store the counter
in the mdev_parent. Implement it using correct locking, fixing mdpy.
Drivers just provide the value in the mdev_driver at registration time
and the core code takes care of maintaining it and exposing the value in
sysfs.
[hch: count instances per-parent instead of per-type, use an atomic_t
to avoid taking mdev_list_lock in the show method]
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20220923092652.100656-15-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Every driver just print a number, simply add a method to the mdev_driver
to return it and provide a standard sysfs show function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20220923092652.100656-13-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Every driver just emits a static string, simply add a field to the
mdev_type for the driver to fill out or fall back to the sysfs name and
provide a standard sysfs show function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20220923092652.100656-12-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Every driver just emits a static string, simply feed it through the ops
and provide a standard sysfs show function.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20220923092652.100656-11-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Just open code the dereferences in the only user.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20220923092652.100656-10-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Instead of abusing struct attribute_group to control initialization of
struct mdev_type, just define the actual attributes in the mdev_driver,
allocate the mdev_type structures in the caller and pass them to
mdev_register_parent.
This allows the caller to use container_of to get at the containing
structure and thus significantly simplify the code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20220923092652.100656-6-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Simplify mdev_{un}register_device by requiring the caller to pass in
a structure allocate as part of the parent device structure. This
removes the need for a list of parents and the separate mdev_parent
refcount as we can simplify rely on the reference to the parent device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20220923092652.100656-5-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Include <linux/device.h> and <linux/uuid.h> so that users of this headers
don't need to do that and remove those includes that aren't needed
any more.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Link: https://lore.kernel.org/r/20220923092652.100656-4-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
We tell driver developers to always pass NAPI_POLL_WEIGHT
as the weight to netif_napi_add(). This may be confusing
to newcomers, drop the weight argument, those who really
need to tweak the weight can use netif_napi_add_weight().
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN
Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As far as I can tell there is no need for the staged setup in
dasd, so allocate the tagset and the disk with the queue in
dasd_gendisk_alloc.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20220928143945.1687114-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
To work around a misbehavior of the compiler's ability to see into
composite flexible array structs (as detailed in the coming memcpy()
hardening series[1]), split the memcpy() of the header and the payload
so no false positive run-time overflow warning will be generated.
[1] https://lore.kernel.org/linux-hardening/20220901065914.1417829-2-keescook@chromium.org/
Cc: Wenjia Zhang <wenjia@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://lore.kernel.org/r/20220927003953.1942442-1-keescook@chromium.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix potential hangs in VFIO AP driver.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmMvKacACgkQjYWKoQLX
FBivOQf/QZl/+75X+ZKUw7Mt6CpE8iIxxEhqFL5elhkl6CWx2JClGCl5IrzMBF8R
ok9rvpg2vc/1ZCis0Vyfverhv8WzSang5zJ0lf80HTw9ZB0s8fxp7ojo8uaQkmJA
ZWdbeXz4xk40ZpFaUmmJIh0djYGG+k8j/tcfjU5Gvy8IcGS6WoSD2Zh8hvAP+ezZ
sUy+2dmEp70VCXBgTClHyfhrswg9A9VFmIVKusAewmy553R/OGyoYiXXe3CE3qpY
DzrBvvQIh27q6MArlsC6Nu1R2U2Zwq2prKrKU9DjbV1uj4GX8JV2dDhavDC53ZfE
6Hxas6fj3UAv/11ItJQF0gxvw8c3bg==
=8Acj
-----END PGP SIGNATURE-----
Merge tag 's390-6.0-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fix from Vasily Gorbik:
- Fix potential hangs in VFIO AP driver
* tag 's390-6.0-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/vfio-ap: bypass unnecessary processing of AP resources
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmMs/PgQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpml9D/wOZVaE/eofmZBWcnl+ZmYtdWQ+N8nv8a2D
dqLR+OBe/w/6oBMnf2VzgzXpCrI+ZgW7z6uMCKpJa8FvcvB4KnB+UcBS5FQgaAdm
Zbs7LJGe7p7lZahwCgjFfeN1L2gYya9vM19QgrSxAUsy3mZCjJpOi644YsNC397C
9+NwzMS6LS2KGHUlZTYL+M8iVBEehuR9oexrHbqhWAm7NaMtMKJGNvPvbt7G3bkl
1RnHmOtLJh1vyD1TxVj0OxCmJ719igFUJHgtAgFLkMVRVli224tAu5lMRZ7kR7IU
l2IJzSM/4af1UjVeMAcXoZp1kht+ks/SEvpT8auh3y44teXsTBCxKQpoUE5n+U7v
737UJN2iZSFi9ahUbg8FgxDu+rmW/Et4G3vptWnVcmAGEd+OOSfdKNhj/oskLdLS
/YioBL9uDvUQDETxbPcnfCN5ySziKXPwRvtobGyjrzHyuCaP9eutFXnwpdW+FAED
9cMyPKFbnnrDlvKfHOybxwWsvGNlNMMeueNglVJ/XUkZhGzizlHhD1+CAgxXa0u5
q8eXpe/y2TtCrl9q3lPKJvoBZ1KVE2cxyK/w17venwcMNb8quy6Yf3FdedlkS04N
rXzEJCSELnkT4F7siii4R9VrcoVU7qUJHA3kLFsNxvNXhwdM2koLa+4gZXfpIn4A
dVHjIuo54Q==
=Z0yq
-----END PGP SIGNATURE-----
Merge tag 'block-6.0-2022-09-22' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"Fix a regression that's been plaguing us by reverting the offending
commit, as attempts to both reproduce the issue and fix it in a saner
fashion have failed.
Fix for a potential oops condition in the s390 dasd block driver"
* tag 'block-6.0-2022-09-22' of git://git.kernel.dk/linux:
Revert "block: freeze the queue earlier in del_gendisk"
s390/dasd: fix Oops in dasd_alias_get_start_dev due to missing pavgroup
It is not necessary to go through the process of validation, linking of
queues to mdev and vice versa and filtering the APQNs assigned to the
matrix mdev to build an AP configuration for a guest if an adapter or
domain being assigned is already assigned to the matrix mdev. Likewise, it
is not necessary to proceed through the process the unassignment of an
adapter, domain or control domain if it is not assigned to the matrix mdev.
Since it is not necessary to process assignment of a resource already
assigned or process unassignment of a resource that is been assigned,
this patch will bypass all assignment/unassignment operations for an
adapter, domain or control domain under these circumstances.
Not only is assignment of a duplicate adapter or domain unnecessary, it
will also cause a hang situation when removing the matrix mdev to which it is
assigned. The reason is because the same vfio_ap_queue objects with an
APQN containing the APID of the adapter or APQI of the domain being
assigned will get added multiple times to the hashtable that holds them.
This results in the pprev and next pointers of the hlist_node (mdev_qnode
field in the vfio_ap_queue object) pointing to the queue object itself
resulting in an interminable loop when the mdev is removed and the queue
table is iterated to reset the queues.
Cc: stable@vger.kernel.org
Fixes: 11cb2419fa ("s390/vfio-ap: manage link between queue struct and matrix mdev")
Reported-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
ccw is the only exception which cannot use vfio_alloc_device() because
its private device structure is designed to serve both mdev and parent.
Life cycle of the parent is managed by css_driver so vfio_ccw_private
must be allocated/freed in css_driver probe/remove path instead of
conforming to vfio core life cycle for mdev.
Given that use a wait/completion scheme so the mdev remove path waits
after vfio_put_device() until receiving a completion notification from
@release. The completion indicates that all active references on
vfio_device have been released.
After that point although free of vfio_ccw_private is delayed to
css_driver it's at least guaranteed to have no parallel reference on
released vfio device part from other code paths.
memset() in @probe is removed. vfio_device is either already cleared
when probed for the first time or cleared in @release from last probe.
The right fix is to introduce separate structures for mdev and parent,
but this won't happen in short term per prior discussions.
Remove vfio_init/uninit_group_dev() as no user now.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20220921104401.38898-14-kevin.tian@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
and manage available_instances inside @init/@release.
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20220921104401.38898-10-kevin.tian@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add a function to check if a device is accessible.
This makes mostly sense for copy pair secondary devices but it will work
for all devices.
The sysfs attribute ping is a write only attribute and will issue a NOP
CCW to the device.
In case of success it will return zero. If the device is not accessible
it will return an error code.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20220920192616.808070-8-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Suppress generic command reject messages and dump of sense data for
Peer-To-Peer-Remote-Copy (PPRC) secondary errors.
If IO is issued on a PPRC secondary device, a specific
error message is printed instead.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20220920192616.808070-7-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The newly defined ioctl BIODASDCOPYPAIRSWAP takes a structure that
specifies a copy pair that should be swapped. It will call the device
discipline function to perform the swap operation.
The structure looks as followed:
struct dasd_copypair_swap_data_t {
char primary[20];
char secondary[20];
__u8 reserved[64];
};
where primary is the old primary device that will be replaced by the
secondary device. The old primary will become a secondary device
afterwards.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20220920192616.808070-6-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In case of errors or misbehaviour of the primary device a controlled
failover to one of the configured secondary devices needs to be
performed.
The swap processing stops I/O on the primary device, all requests are
re-queued to the blocklayer queue, the entries in the copy relation are
swapped and finally the link to the blockdevice is moved from primary to
secondary dasd device.
After this, the secondary becomes the new primary device and I/O is
restarted on that device.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20220920192616.808070-5-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A copy relation that is configured on the storage server side needs to be
enabled separately in the device driver. A sysfs interface is created
that allows userspace tooling to control such setup.
The following sysfs entries are added to store and read copy relation
information:
copy_pair
- Add/Delete a copy pair relation to the DASD device driver
- Query all previously added copy pair relations
copy_role
- Query the copy pair role of the device
To add a copy pair to the DASD device driver it has to be specified
through the sysfs attribute copy_pair. Only one secondary device can be
specified at a time together with the primary device. Both, secondary
and primary can be used equally to define the copy pair.
The secondary devices have to be offline when adding the copy relation.
The primary device needs to be specified first followed by the comma
separated secondary device.
Read from the copy_pair attribute to get the current setup and write
"clear" to the attribute to delete any existing setup.
Example:
$ echo 0.0.9700,0.0.9740 > /sys/bus/ccw/devices/0.0.9700/copy_pair
$ cat /sys/bus/ccw/devices/0.0.9700/copy_pair
0.0.9700,0.0.9740
During device online processing the required data will be read from the
storage server and the information will be compared to the setup
requested through the copy_pair attribute. The registration of the
primary and secondary device will be handled accordingly.
A blockdevice is only allocated for copy relation primary devices.
To query the copy role of a device read from the copy_role sysfs
attribute. Possible values are primary, secondary, and none.
Example:
$ cat /sys/bus/ccw/devices/0.0.9700/copy_role
primary
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20220920192616.808070-4-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add function to query the Peer-to-Peer-Remote-Copy (PPRC) state of a
device by reading the related structure through a read subsystem data call.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20220920192616.808070-3-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Put block allocation into a separate function to put some copy pair logic
in it in a later patch.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20220920192616.808070-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix Oops in dasd_alias_get_start_dev() function caused by the pavgroup
pointer being NULL.
The pavgroup pointer is checked on the entrance of the function but
without the lcu->lock being held. Therefore there is a race window
between dasd_alias_get_start_dev() and _lcu_update() which sets
pavgroup to NULL with the lcu->lock held.
Fix by checking the pavgroup pointer with lcu->lock held.
Cc: <stable@vger.kernel.org> # 2.6.25+
Fixes: 8e09f21574 ("[S390] dasd: add hyper PAV support to DASD device driver, part 1")
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20220919154931.4123002-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Function memcpy_real() is an univeral data mover that does not
require DAT mode to be able reading from a physical address.
Its advantage is an ability to read from any address, even
those for which no kernel virtual mapping exists.
Although memcpy_real() is interrupt-safe, there are no handlers
that make use of this function. The compiler instrumentation
have to be disabled and separate no-DAT stack used to allow
execution of the function once DAT mode is disabled.
Rework memcpy_real() to overcome these shortcomings. As result,
data copying (which is primarily reading out a crashed system
memory by a user process) is executed on a regular stack with
enabled interrupts. Also, use of memcpy_real_buf swap buffer
becomes unnecessary and the swapping is eliminated.
The above is achieved by using a fixed virtual address range
that spans a single page and remaps that page repeatedly when
memcpy_real() is called for a particular physical address.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
There should be no reason to adjust old ktermios which is going to get
discarded anyway.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220816115739.10928-9-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Fix a KVM crash on z12 and older machines caused by a wrong
assumption that Query AP Configuration Information is always
available.
- Lower severity of excessive Hypervisor filesystem error messages
when booting under KVM.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCYwB2ahccYWdvcmRlZXZA
bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8DSLAP4lScZKm0o1eCJ/impnmFydkKDO
SWHqP0ZTLNJvVtpp3gD+IpOLRAIPcBKA3+/c9nG35rw+TfoRbpbWbV70/PVpQgA=
=Vcv6
-----END PGP SIGNATURE-----
Merge tag 's390-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Fix a KVM crash on z12 and older machines caused by a wrong
assumption that Query AP Configuration Information is always
available.
- Lower severity of excessive Hypervisor filesystem error messages
when booting under KVM.
* tag 's390-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/ap: fix crash on older machines based on QCI info missing
s390/hypfs: avoid error message under KVM
This reverts commit a10fba0377145fccefea4dc4dd5915b7ed87e546: the
proposed API isn't supported on all transports but no
effort was made to address this.
It might not be hard to fix if we want to: maybe just
rename size to size_hint and make sure legacy
transports ignore the hint.
But it's not sure what the benefit is in any case, so
let's drop it.
Fixes: a10fba0377 ("virtio: find_vqs() add arg sizes")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220816053602.173815-8-mst@redhat.com>
On older z series machines (z12 and older) there is no QCI info
available. The AP code took care of this and the AP bus scan then
switched to simple probing via TAPQ.
With commit
283915850a ("s390/ap: notify drivers on config changed and scan complete callbacks")
some code was introduced which silently assumed that the QCI info is
always available. However, with KVM simulating an older machine (z12)
the result was a kernel crash. Funnily the same crash does not happen
on LPAR - maybe because NULL is a valid pointer and reading some data
from address 0 also works fine.
This fix now improves the code to be aware that the QCI instruction
may not be available on older machines and thus the two pointers to
QCI info structs may simple be NULL.
However, on a machine not providing the QCI info the two callbacks to
the zcrypt device drivers on_config_changed() and on_scan_complete()
provide parameters which are pointers to a QCI info struct.
These both callbacks are NOT served if there is no QCI info available.
The only consumer of these callbacks is the vfio device driver. This
driver only supports CEX4 and higher. All physical machines which are
able to provide CEX4 cards have QCI support available. So there is
no sense in for example fill the QCI info struct by hand with looping
over cards and queues and TAPQ each APQN.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Cc: stable@vger.kernel.org
Fixes: 283915850a ("s390/ap: notify drivers on config changed and scan complete callbacks")
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Mostly small bug fixes and trivial updates. The major new core update
is a change to the way device, target and host reference counting is
done to try to make it more robust (this change has soaked for a while
to try to winkle out any bugs).
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYveemSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pisheaiAP9DPQ70
7hEdak6evXUwlWwlVBvEFAfZlzpHN+uNzUCvpgD+N61RSPhHV1hXu12sVMmjMNEb
pow+ee47Mc0t/OO68jA=
=1yQh
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"Mostly small bug fixes and trivial updates.
The major new core update is a change to the way device, target and
host reference counting is done to try to make it more robust (this
change has soaked for a while to try to winkle out any bugs)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: pm8001: Fix typo 'the the' in comment
scsi: megaraid_sas: Remove redundant variable cmd_type
scsi: FlashPoint: Remove redundant variable bm_int_st
scsi: zfcp: Fix missing auto port scan and thus missing target ports
scsi: core: Call blk_mq_free_tag_set() earlier
scsi: core: Simplify LLD module reference counting
scsi: core: Make sure that hosts outlive targets
scsi: core: Make sure that targets outlive devices
scsi: ufs: ufs-pci: Correct check for RESET DSM
scsi: target: core: De-RCU of se_lun and se_lun acl
scsi: target: core: Fix race during ACL removal
scsi: ufs: core: Correct ufshcd_shutdown() flow
scsi: ufs: core: Increase the maximum data buffer size
scsi: lpfc: Check the return value of alloc_workqueue()
A huge patchset supporting vq resize using the
new vq reset capability.
Features, fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmL2F9APHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp00QIAKpxyu+zCtrdDuh68DsNn1Cu0y0PXG336ySy
MA1ck/bv94MZBIbI/Bnn3T1jDmUqTFHJiwaGz/aZ5gGAplZiejhH5Ds3SYjHckaa
MKeJ4FTXin9RESP+bXhv4BgZ+ju3KHHkf1jw3TAdVKQ7Nma1u4E6f8nprYEi0TI0
7gLUYenqzS7X1+v9O3rEvPr7tSbAKXYGYpV82sSjHIb9YPQx5luX1JJIZade8A25
mTt5hG1dP1ugUm1NEBPQHjSvdrvO3L5Ahy0My2Bkd77+tOlNF4cuMPt2NS/6+Pgd
n6oMt3GXqVvw5RxZyY8dpknH5kofZhjgFyZXH0l+aNItfHUs7t0=
=rIo2
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- A huge patchset supporting vq resize using the new vq reset
capability
- Features, fixes, and cleanups all over the place
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (88 commits)
vdpa/mlx5: Fix possible uninitialized return value
vdpa_sim_blk: add support for discard and write-zeroes
vdpa_sim_blk: add support for VIRTIO_BLK_T_FLUSH
vdpa_sim_blk: make vdpasim_blk_check_range usable by other requests
vdpa_sim_blk: check if sector is 0 for commands other than read or write
vdpa_sim: Implement suspend vdpa op
vhost-vdpa: uAPI to suspend the device
vhost-vdpa: introduce SUSPEND backend feature bit
vdpa: Add suspend operation
virtio-blk: Avoid use-after-free on suspend/resume
virtio_vdpa: support the arg sizes of find_vqs()
vhost-vdpa: Call ida_simple_remove() when failed
vDPA: fix 'cast to restricted le16' warnings in vdpa.c
vDPA: !FEATURES_OK should not block querying device config space
vDPA/ifcvf: support userspace to query features and MQ of a management device
vDPA/ifcvf: get_config_size should return a value no greater than dev implementation
vhost scsi: Allow user to control num virtqueues
vhost-scsi: Fix max number of virtqueues
vdpa/mlx5: Support different address spaces for control and data
vdpa/mlx5: Implement susupend virtqueue callback
...
A little longer PR than usual but it's all fixes, no late features.
It's long partially because of timing, and partially because of
follow ups to stuff that got merged a week or so before the merge
window and wasn't as widely tested. Maybe the Bluetooth fixes are
a little alarming so we'll address that, but the rest seems okay
and not scary.
Notably we're including a fix for the netfilter Kconfig [1], your
WiFi warning [2] and a bluetooth fix which should unblock syzbot [3].
Current release - regressions:
- Bluetooth:
- don't try to cancel uninitialized works [3]
- L2CAP: fix use-after-free caused by l2cap_chan_put
- tls: rx: fix device offload after recent rework
- devlink: fix UAF on failed reload and leftover locks in mlxsw
Current release - new code bugs:
- netfilter:
- flowtable: fix incorrect Kconfig dependencies [1]
- nf_tables: fix crash when nf_trace is enabled
- bpf:
- use proper target btf when exporting attach_btf_obj_id
- arm64: fixes for bpf trampoline support
- Bluetooth:
- ISO: unlock on error path in iso_sock_setsockopt()
- ISO: fix info leak in iso_sock_getsockopt()
- ISO: fix iso_sock_getsockopt for BT_DEFER_SETUP
- ISO: fix memory corruption on iso_pinfo.base
- ISO: fix not using the correct QoS
- hci_conn: fix updating ISO QoS PHY
- phy: dp83867: fix get nvmem cell fail
Previous releases - regressions:
- wifi: cfg80211: fix validating BSS pointers in
__cfg80211_connect_result [2]
- atm: bring back zatm uAPI after ATM had been removed
- properly fix old bug making bonding ARP monitor mode not being
able to work with software devices with lockless Tx
- tap: fix null-deref on skb->dev in dev_parse_header_protocol
- revert "net: usb: ax88179_178a needs FLAG_SEND_ZLP" it helps
some devices and breaks others
- netfilter:
- nf_tables: many fixes rejecting cross-object linking
which may lead to UAFs
- nf_tables: fix null deref due to zeroed list head
- nf_tables: validate variable length element extension
- bgmac: fix a BUG triggered by wrong bytes_compl
- bcmgenet: indicate MAC is in charge of PHY PM
Previous releases - always broken:
- bpf:
- fix bad pointer deref in bpf_sys_bpf() injected via test infra
- disallow non-builtin bpf programs calling the prog_run command
- don't reinit map value in prealloc_lru_pop
- fix UAFs during the read of map iterator fd
- fix invalidity check for values in sk local storage map
- reject sleepable program for non-resched map iterator
- mptcp:
- move subflow cleanup in mptcp_destroy_common()
- do not queue data on closed subflows
- virtio_net: fix memory leak inside XDP_TX with mergeable
- vsock: fix memory leak when multiple threads try to connect()
- rework sk_user_data sharing to prevent psock leaks
- geneve: fix TOS inheriting for ipv4
- tunnels & drivers: do not use RT_TOS for IPv6 flowlabel
- phy: c45 baset1: do not skip aneg configuration if clock role
is not specified
- rose: avoid overflow when /proc displays timer information
- x25: fix call timeouts in blocking connects
- can: mcp251x: fix race condition on receive interrupt
- can: j1939:
- replace user-reachable WARN_ON_ONCE() with netdev_warn_once()
- fix memory leak of skbs in j1939_session_destroy()
Misc:
- docs: bpf: clarify that many things are not uAPI
- seg6: initialize induction variable to first valid array index
(to silence clang vs objtool warning)
- can: ems_usb: fix clang 14's -Wunaligned-access warning
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=C5Ck
-----END PGP SIGNATURE-----
Merge tag 'net-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, bpf, can and netfilter.
A little larger than usual but it's all fixes, no late features. It's
large partially because of timing, and partially because of follow ups
to stuff that got merged a week or so before the merge window and
wasn't as widely tested. Maybe the Bluetooth fixes are a little
alarming so we'll address that, but the rest seems okay and not scary.
Notably we're including a fix for the netfilter Kconfig [1], your WiFi
warning [2] and a bluetooth fix which should unblock syzbot [3].
Current release - regressions:
- Bluetooth:
- don't try to cancel uninitialized works [3]
- L2CAP: fix use-after-free caused by l2cap_chan_put
- tls: rx: fix device offload after recent rework
- devlink: fix UAF on failed reload and leftover locks in mlxsw
Current release - new code bugs:
- netfilter:
- flowtable: fix incorrect Kconfig dependencies [1]
- nf_tables: fix crash when nf_trace is enabled
- bpf:
- use proper target btf when exporting attach_btf_obj_id
- arm64: fixes for bpf trampoline support
- Bluetooth:
- ISO: unlock on error path in iso_sock_setsockopt()
- ISO: fix info leak in iso_sock_getsockopt()
- ISO: fix iso_sock_getsockopt for BT_DEFER_SETUP
- ISO: fix memory corruption on iso_pinfo.base
- ISO: fix not using the correct QoS
- hci_conn: fix updating ISO QoS PHY
- phy: dp83867: fix get nvmem cell fail
Previous releases - regressions:
- wifi: cfg80211: fix validating BSS pointers in
__cfg80211_connect_result [2]
- atm: bring back zatm uAPI after ATM had been removed
- properly fix old bug making bonding ARP monitor mode not being able
to work with software devices with lockless Tx
- tap: fix null-deref on skb->dev in dev_parse_header_protocol
- revert "net: usb: ax88179_178a needs FLAG_SEND_ZLP" it helps some
devices and breaks others
- netfilter:
- nf_tables: many fixes rejecting cross-object linking which may
lead to UAFs
- nf_tables: fix null deref due to zeroed list head
- nf_tables: validate variable length element extension
- bgmac: fix a BUG triggered by wrong bytes_compl
- bcmgenet: indicate MAC is in charge of PHY PM
Previous releases - always broken:
- bpf:
- fix bad pointer deref in bpf_sys_bpf() injected via test infra
- disallow non-builtin bpf programs calling the prog_run command
- don't reinit map value in prealloc_lru_pop
- fix UAFs during the read of map iterator fd
- fix invalidity check for values in sk local storage map
- reject sleepable program for non-resched map iterator
- mptcp:
- move subflow cleanup in mptcp_destroy_common()
- do not queue data on closed subflows
- virtio_net: fix memory leak inside XDP_TX with mergeable
- vsock: fix memory leak when multiple threads try to connect()
- rework sk_user_data sharing to prevent psock leaks
- geneve: fix TOS inheriting for ipv4
- tunnels & drivers: do not use RT_TOS for IPv6 flowlabel
- phy: c45 baset1: do not skip aneg configuration if clock role is
not specified
- rose: avoid overflow when /proc displays timer information
- x25: fix call timeouts in blocking connects
- can: mcp251x: fix race condition on receive interrupt
- can: j1939:
- replace user-reachable WARN_ON_ONCE() with netdev_warn_once()
- fix memory leak of skbs in j1939_session_destroy()
Misc:
- docs: bpf: clarify that many things are not uAPI
- seg6: initialize induction variable to first valid array index (to
silence clang vs objtool warning)
- can: ems_usb: fix clang 14's -Wunaligned-access warning"
* tag 'net-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (117 commits)
net: atm: bring back zatm uAPI
dpaa2-eth: trace the allocated address instead of page struct
net: add missing kdoc for struct genl_multicast_group::flags
nfp: fix use-after-free in area_cache_get()
MAINTAINERS: use my korg address for mt7601u
mlxsw: minimal: Fix deadlock in ports creation
bonding: fix reference count leak in balance-alb mode
net: usb: qmi_wwan: Add support for Cinterion MV32
bpf: Shut up kern_sys_bpf warning.
net/tls: Use RCU API to access tls_ctx->netdev
tls: rx: device: don't try to copy too much on detach
tls: rx: device: bound the frag walk
net_sched: cls_route: remove from list when handle is 0
selftests: forwarding: Fix failing tests with old libnet
net: refactor bpf_sk_reuseport_detach()
net: fix refcount bug in sk_psock_get (2)
selftests/bpf: Ensure sleepable program is rejected by hash map iter
selftests/bpf: Add write tests for sk local storage map iterator
selftests/bpf: Add tests for reading a dangling map iter fd
bpf: Only allow sleepable program for resched-able iterator
...
find_vqs() adds a new parameter sizes to specify the size of each vq
vring.
NULL as sizes means that all queues in find_vqs() use the maximum size.
A value in the array is 0, which means that the corresponding queue uses
the maximum size.
In the split scenario, the meaning of size is the largest size, because
it may be limited by memory, the virtio core will try a smaller size.
And the size is power of 2.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220801063902.129329-34-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio-net can display the maximum (supported by hardware) ring size in
ethtool -g eth0.
When the subsequent patch implements vring reset, it can judge whether
the ring size passed by the driver is legal based on this.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220801063902.129329-2-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since
commit e6e771b3d8 ("s390/qeth: detach netdevice while card is offline")
there was a timing window during recovery, that qeth_query_card_info could
be sent to the card, even before it was ready for it, leading to a failing
card recovery. There is evidence that this window was hit, as not all
callers of get_link_ksettings() check for netif_device_present.
Use cached values in qeth_get_link_ksettings(), instead of calling
qeth_query_card_info() and falling back to default values in case it
fails. Link info is already updated when the card goes online, e.g. after
STARTLAN (physical link up). Set the link info to default values, when the
card goes offline or at STOPLAN (physical link down). A follow-on patch
will improve values reported for link down.
Fixes: e6e771b3d8 ("s390/qeth: detach netdevice while card is offline")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Thorsten Winkler <twinkler@linux.ibm.com>
Link: https://lore.kernel.org/r/20220805155714.59609-1-wintera@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Rework copy_oldmem_page() callback to take an iov_iter.
This includes few prerequisite updates and fixes to the
oldmem reading code.
- Rework cpufeature implementation to allow for various CPU feature
indications, which is not only limited to hardware capabilities,
but also allows CPU facilities.
- Use the cpufeature rework to autoload Ultravisor module when CPU
facility 158 is available.
- Add ELF note type for encrypted CPU state of a protected virtual CPU.
The zgetdump tool from s390-tools package will decrypt the CPU state
using a Customer Communication Key and overwrite respective notes to
make the data accessible for crash and other debugging tools.
- Use vzalloc() instead of vmalloc() + memset() in ChaCha20 crypto test.
- Fix incorrect recovery of kretprobe modified return address in stacktrace.
- Switch the NMI handler to use generic irqentry_nmi_enter() and
irqentry_nmi_exit() helper functions.
- Rework the cryptographic Adjunct Processors (AP) pass-through design
to support dynamic changes to the AP matrix of a running guest as well
as to implement more of the AP architecture.
- Minor boot code cleanups.
- Grammar and typo fixes to hmcdrv and tape drivers.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCYu4dRBccYWdvcmRlZXZA
bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8DnlAP45Sk4cE35T+Z0vdHE2f0uMXE/p
uHNjS3fDZOQVFJ2jZwEA99xPF5qPCttbR/b1VHsMSb30684IT1A4PC7y05kgfAw=
=jCc3
-----END PGP SIGNATURE-----
Merge tag 's390-5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Rework copy_oldmem_page() callback to take an iov_iter.
This includes a few prerequisite updates and fixes to the oldmem
reading code.
- Rework cpufeature implementation to allow for various CPU feature
indications, which is not only limited to hardware capabilities, but
also allows CPU facilities.
- Use the cpufeature rework to autoload Ultravisor module when CPU
facility 158 is available.
- Add ELF note type for encrypted CPU state of a protected virtual CPU.
The zgetdump tool from s390-tools package will decrypt the CPU state
using a Customer Communication Key and overwrite respective notes to
make the data accessible for crash and other debugging tools.
- Use vzalloc() instead of vmalloc() + memset() in ChaCha20 crypto
test.
- Fix incorrect recovery of kretprobe modified return address in
stacktrace.
- Switch the NMI handler to use generic irqentry_nmi_enter() and
irqentry_nmi_exit() helper functions.
- Rework the cryptographic Adjunct Processors (AP) pass-through design
to support dynamic changes to the AP matrix of a running guest as
well as to implement more of the AP architecture.
- Minor boot code cleanups.
- Grammar and typo fixes to hmcdrv and tape drivers.
* tag 's390-5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (46 commits)
Revert "s390/smp: enforce lowcore protection on CPU restart"
Revert "s390/smp: rework absolute lowcore access"
Revert "s390/smp,ptdump: add absolute lowcore markers"
s390/unwind: fix fgraph return address recovery
s390/nmi: use irqentry_nmi_enter()/irqentry_nmi_exit()
s390: add ELF note type for encrypted CPU state of a PV VCPU
s390/smp,ptdump: add absolute lowcore markers
s390/smp: rework absolute lowcore access
s390/setup: rearrange absolute lowcore initialization
s390/boot: cleanup adjust_to_uv_max() function
s390/smp: enforce lowcore protection on CPU restart
s390/tape: fix comment typo
s390/hmcdrv: fix Kconfig "its" grammar
s390/docs: fix warnings for vfio_ap driver doc
s390/docs: fix warnings for vfio_ap driver lock usage doc
s390/crash: support multi-segment iterators
s390/crash: use static swap buffer for copy_to_user_real()
s390/crash: move copy_to_user_real() to crash_dump.c
s390/zcore: fix race when reading from hardware system area
s390/crash: fix incorrect number of bytes to copy to user space
...
- Cleanup use of extern in function prototypes (Alex Williamson)
- Simplify bus_type usage and convert to device IOMMU interfaces
(Robin Murphy)
- Check missed return value and fix comment typos (Bo Liu)
- Split migration ops from device ops and fix races in mlx5 migration
support (Yishai Hadas)
- Fix missed return value check in noiommu support (Liam Ni)
- Hardening to clear buffer pointer to avoid use-after-free (Schspa Shi)
- Remove requirement that only the same mm can unmap a previously
mapped range (Li Zhe)
- Adjust semaphore release vs device open counter (Yi Liu)
- Remove unused arg from SPAPR support code (Deming Wang)
- Rework vfio-ccw driver to better fit new mdev framework (Eric Farman,
Michael Kawano)
- Replace DMA unmap notifier with callbacks (Jason Gunthorpe)
- Clarify SPAPR support comment relative to iommu_ops (Alexey Kardashevskiy)
- Revise page pinning API towards compatibility with future iommufd support
(Nicolin Chen)
- Resolve issues in vfio-ccw, including use of DMA unmap callback
(Eric Farman)
-----BEGIN PGP SIGNATURE-----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=4BE8
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.0-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Cleanup use of extern in function prototypes (Alex Williamson)
- Simplify bus_type usage and convert to device IOMMU interfaces (Robin
Murphy)
- Check missed return value and fix comment typos (Bo Liu)
- Split migration ops from device ops and fix races in mlx5 migration
support (Yishai Hadas)
- Fix missed return value check in noiommu support (Liam Ni)
- Hardening to clear buffer pointer to avoid use-after-free (Schspa
Shi)
- Remove requirement that only the same mm can unmap a previously
mapped range (Li Zhe)
- Adjust semaphore release vs device open counter (Yi Liu)
- Remove unused arg from SPAPR support code (Deming Wang)
- Rework vfio-ccw driver to better fit new mdev framework (Eric Farman,
Michael Kawano)
- Replace DMA unmap notifier with callbacks (Jason Gunthorpe)
- Clarify SPAPR support comment relative to iommu_ops (Alexey
Kardashevskiy)
- Revise page pinning API towards compatibility with future iommufd
support (Nicolin Chen)
- Resolve issues in vfio-ccw, including use of DMA unmap callback (Eric
Farman)
* tag 'vfio-v6.0-rc1' of https://github.com/awilliam/linux-vfio: (40 commits)
vfio/pci: fix the wrong word
vfio/ccw: Check return code from subchannel quiesce
vfio/ccw: Remove FSM Close from remove handlers
vfio/ccw: Add length to DMA_UNMAP checks
vfio: Replace phys_pfn with pages for vfio_pin_pages()
vfio/ccw: Add kmap_local_page() for memcpy
vfio: Rename user_iova of vfio_dma_rw()
vfio/ccw: Change pa_pfn list to pa_iova list
vfio/ap: Change saved_pfn to saved_iova
vfio: Pass in starting IOVA to vfio_pin/unpin_pages API
vfio/ccw: Only pass in contiguous pages
vfio/ap: Pass in physical address of ind to ap_aqic()
drm/i915/gvt: Replace roundup with DIV_ROUND_UP
vfio: Make vfio_unpin_pages() return void
vfio/spapr_tce: Fix the comment
vfio: Replace the iommu notifier with a device list
vfio: Replace the DMA unmapping notifier with a callback
vfio/ccw: Move FSM open/close to MDEV open/close
vfio/ccw: Refactor vfio_ccw_mdev_reset
vfio/ccw: Create a CLOSE FSM event
...
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmLsRfkQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpj43EADBydQhe7nQHH65gecqvttnio2GqEmcbozt
lKFQlPPd3SHGMAJjSdR1dIwqtPsJ8q6xZXH+TjHhLXb2kgVu+TQ31krNHIqBwE14
s7SsgGRgvopA46lSf/ls18/8sh6Yz1NgI39YcMVPjvkbLaVFK7zRkL9OSp4RQCwH
u/IIHJmV415EeF6QNTgABBel/gEIPBLsvwOxTBIkzDOyUohtExZPYj83MDm7jdr3
jsTUd2MiumNMh7ziMJIp1iN32nQOtIKtwWZaMHDCzfU/IUnBSmh2nj9oXr3+vcwo
IsBMDUfUj9Eig5QQ/XcVIrFezi0GnunpBhScXPqL+dxPN812lzxNjkx6PsC+rPn8
mWmXoaeK1ayoyotdHJlmINNmWUSCkOMwVnA2r1c4Hp4cQS5vRUtkKcpNLTpMhk4I
OwQ3bjt9mA//WlH+apbhJqXqxjcoBwCwMoveJ4mHVtku9lo+JJAKVGdUs17QjZkC
NxACP1MtBcXy1hurNQf14oH5C0Hyg4TBJShPauKmrqGtOFnbOAdX2qIhldvyNfH1
l9cOvGNSgbQ6FLD6MVto6dC/KYOEM3LelVxgNB/80GbSmGwj88Kd/nzQLYFP89JJ
0Wkt14mSkm82gabOvNqXGG8P8hLb/+v6sp4qZv0mf+op0xmb4FB5eaZvoceptVzM
3Z+hmT7MfA==
=pgNf
-----END PGP SIGNATURE-----
Merge tag 'for-5.20/block-2022-08-04' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
- NVMe pull requests via Christoph:
- add support for In-Band authentication (Hannes Reinecke)
- handle the persistent internal error AER (Michael Kelley)
- use in-capsule data for TCP I/O queue connect (Caleb Sander)
- remove timeout for getting RDMA-CM established event (Israel
Rukshin)
- misc cleanups (Joel Granados, Sagi Grimberg, Chaitanya Kulkarni,
Guixin Liu, Xiang wangx)
- use command_id instead of req->tag in trace_nvme_complete_rq()
(Bean Huo)
- various fixes for the new authentication code (Lukas Bulwahn,
Dan Carpenter, Colin Ian King, Chaitanya Kulkarni, Hannes
Reinecke)
- small cleanups (Liu Song, Christoph Hellwig)
- restore compat_ioctl support (Nick Bowler)
- make a nvmet-tcp workqueue lockdep-safe (Sagi Grimberg)
- enable generic interface (/dev/ngXnY) for unknown command sets
(Joel Granados, Christoph Hellwig)
- don't always build constants.o (Christoph Hellwig)
- print the command name of aborted commands (Christoph Hellwig)
- MD pull requests via Song:
- Improve raid5 lock contention, by Logan Gunthorpe.
- Misc fixes to raid5, by Logan Gunthorpe.
- Fix race condition with md_reap_sync_thread(), by Guoqing Jiang.
- Fix potential deadlock with raid5_quiesce and
raid5_get_active_stripe, by Logan Gunthorpe.
- Refactoring md_alloc(), by Christoph"
- Fix md disk_name lifetime problems, by Christoph Hellwig
- Convert prepare_to_wait() to wait_woken() api, by Logan
Gunthorpe;
- Fix sectors_to_do bitmap issue, by Logan Gunthorpe.
- Work on unifying the null_blk module parameters and configfs API
(Vincent)
- drbd bitmap IO error fix (Lars)
- Set of rnbd fixes (Guoqing, Md Haris)
- Remove experimental marker on bcache async device registration (Coly)
- Series from cleaning up the bio splitting (Christoph)
- Removal of the sx8 block driver. This hardware never really
widespread, and it didn't receive a lot of attention after the
initial merge of it back in 2005 (Christoph)
- A few fixes for s390 dasd (Eric, Jiang)
- Followup set of fixes for ublk (Ming)
- Support for UBLK_IO_NEED_GET_DATA for ublk (ZiyangZhang)
- Fixes for the dio dma alignment (Keith)
- Misc fixes and cleanups (Ming, Yu, Dan, Christophe
* tag 'for-5.20/block-2022-08-04' of git://git.kernel.dk/linux-block: (136 commits)
s390/dasd: Establish DMA alignment
s390/dasd: drop unexpected word 'for' in comments
ublk_drv: add support for UBLK_IO_NEED_GET_DATA
ublk_cmd.h: add one new ublk command: UBLK_IO_NEED_GET_DATA
ublk_drv: cleanup ublksrv_ctrl_dev_info
ublk_drv: add SET_PARAMS/GET_PARAMS control command
ublk_drv: fix ublk device leak in case that add_disk fails
ublk_drv: cancel device even though disk isn't up
block: fix leaking page ref on truncated direct io
block: ensure bio_iov_add_page can't fail
block: ensure iov_iter advances for added pages
drivers:md:fix a potential use-after-free bug
md/raid5: Ensure batch_last is released before sleeping for quiesce
md/raid5: Move stripe_request_ctx up
md/raid5: Drop unnecessary call to r5c_check_stripe_cache_usage()
md/raid5: Make is_inactive_blocked() helper
md/raid5: Refactor raid5_get_active_stripe()
block: pass struct queue_limits to the bio splitting helpers
block: move bio_allowed_max_sectors to blk-merge.c
block: move the call to get_max_io_size out of blk_bio_segment_split
...
Updates to the usual drivers (ufs, qla2xx, target, lpfc, smartpqi,
mpi3mr). The main driver change that might cause issues on down the
road is the conversion of some of our oldest surviving drivers to the
DMA API (should only affect m68k). The only major core change is the
rework of async resume; the rest are either completely trivial or for
updating deprecated APIs.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYuvakyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishfvOAP4m0N6b
e3JwoBtB1c0JMKv6G4gka8suEG8p5f4khDu8wwD+LfGUCzG49Y5Ts7rByXfEiGgO
krSdwsAZiV6yKg/HuPw=
=Ak9L
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, qla2xx, target, lpfc, smartpqi,
mpi3mr).
The main driver change that might cause issues on down the road is the
conversion of some of our oldest surviving drivers to the DMA API
(should only affect m68k).
The only major core change is the rework of async resume; the rest are
either completely trivial or for updating deprecated APIs"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (195 commits)
scsi: target: Remove XDWRITEREAD emulated support
scsi: megaraid: Remove the static variable initialisation
scsi: ch: Do not initialise statics to 0
scsi: ufs: core: Fix spelling mistake "Cannnot" -> "Cannot"
scsi: target: iscsi: Do not require target authentication
scsi: target: iscsi: Allow AuthMethod=None
scsi: target: iscsi: Support base64 in CHAP
scsi: target: iscsi: Add support for extended CDB AHS
scsi: ufs: dt-bindings: Add SC8280XP binding
scsi: target: iscsi: Fix clang -Wformat warnings
scsi: ufs: core: Read device property for ref clock
scsi: libsas: Resume SAS host for phy reset or enable via sysfs
scsi: hisi_sas: Modify v3 HW SATA completion error processing
scsi: hisi_sas: Relocate DMA unmap of SMP task
scsi: hisi_sas: Remove unnecessary variable to hold DMA map elements
scsi: hisi_sas: Call hisi_sas_slave_configure() from slave_configure_v3_hw()
scsi: mpi3mr: Delete a stray tab
scsi: mpi3mr: Unlock on error path
scsi: mpi3mr: Reduce VD queue depth on detecting throttling
scsi: mpi3mr: Resource Based Metering
...
linux-next commit bf8d08532b ("iomap: add support for dma aligned
direct-io") changes the alignment requirement to come from the block
device rather than the block size, and the default alignment
requirement is 512-byte boundaries. Since DASD I/O has page
alignments for IDAW/TIDAW requests, let's override this value to
restore the expected behavior.
Make this change for both ECKD and DIAG disciplines, as they both
would fall into this category. Leave FBA alone, since it is always
comprised of 512-byte blocks.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20220804213926.3361574-3-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* Unwinder implementations for both nVHE modes (classic and
protected), complete with an overflow stack
* Rework of the sysreg access from userspace, with a complete
rewrite of the vgic-v3 view to allign with the rest of the
infrastructure
* Disagregation of the vcpu flags in separate sets to better track
their use model.
* A fix for the GICv2-on-v3 selftest
* A small set of cosmetic fixes
RISC-V:
* Track ISA extensions used by Guest using bitmap
* Added system instruction emulation framework
* Added CSR emulation framework
* Added gfp_custom flag in struct kvm_mmu_memory_cache
* Added G-stage ioremap() and iounmap() functions
* Added support for Svpbmt inside Guest
s390:
* add an interface to provide a hypervisor dump for secure guests
* improve selftests to use TAP interface
* enable interpretive execution of zPCI instructions (for PCI passthrough)
* First part of deferred teardown
* CPU Topology
* PV attestation
* Minor fixes
x86:
* Permit guests to ignore single-bit ECC errors
* Intel IPI virtualization
* Allow getting/setting pending triple fault with KVM_GET/SET_VCPU_EVENTS
* PEBS virtualization
* Simplify PMU emulation by just using PERF_TYPE_RAW events
* More accurate event reinjection on SVM (avoid retrying instructions)
* Allow getting/setting the state of the speaker port data bit
* Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls are inconsistent
* "Notify" VM exit (detect microarchitectural hangs) for Intel
* Use try_cmpxchg64 instead of cmpxchg64
* Ignore benign host accesses to PMU MSRs when PMU is disabled
* Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior
* Allow NX huge page mitigation to be disabled on a per-vm basis
* Port eager page splitting to shadow MMU as well
* Enable CMCI capability by default and handle injected UCNA errors
* Expose pid of vcpu threads in debugfs
* x2AVIC support for AMD
* cleanup PIO emulation
* Fixes for LLDT/LTR emulation
* Don't require refcounted "struct page" to create huge SPTEs
* Miscellaneous cleanups:
** MCE MSR emulation
** Use separate namespaces for guest PTEs and shadow PTEs bitmasks
** PIO emulation
** Reorganize rmap API, mostly around rmap destruction
** Do not workaround very old KVM bugs for L0 that runs with nesting enabled
** new selftests API for CPUID
Generic:
* Fix races in gfn->pfn cache refresh; do not pin pages tracked by the cache
* new selftests API using struct kvm_vcpu instead of a (vm, id) tuple
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmLnyo4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMtQQf/XjVWiRcWLPR9dqzRM/vvRXpiG+UL
jU93R7m6ma99aqTtrxV/AE+kHgamBlma3Cwo+AcWk9uCVNbIhFjv2YKg6HptKU0e
oJT3zRYp+XIjEo7Kfw+TwroZbTlG6gN83l1oBLFMqiFmHsMLnXSI2mm8MXyi3dNB
vR2uIcTAl58KIprqNNsYJ2dNn74ogOMiXYx9XzoA9/5Xb6c0h4rreHJa5t+0s9RO
Gz7Io3PxumgsbJngjyL1Ve5oxhlIAcZA8DU0PQmjxo3eS+k6BcmavGFd45gNL5zg
iLpCh4k86spmzh8CWkAAwWPQE4dZknK6jTctJc0OFVad3Z7+X7n0E8TFrA==
=PM8o
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"Quite a large pull request due to a selftest API overhaul and some
patches that had come in too late for 5.19.
ARM:
- Unwinder implementations for both nVHE modes (classic and
protected), complete with an overflow stack
- Rework of the sysreg access from userspace, with a complete rewrite
of the vgic-v3 view to allign with the rest of the infrastructure
- Disagregation of the vcpu flags in separate sets to better track
their use model.
- A fix for the GICv2-on-v3 selftest
- A small set of cosmetic fixes
RISC-V:
- Track ISA extensions used by Guest using bitmap
- Added system instruction emulation framework
- Added CSR emulation framework
- Added gfp_custom flag in struct kvm_mmu_memory_cache
- Added G-stage ioremap() and iounmap() functions
- Added support for Svpbmt inside Guest
s390:
- add an interface to provide a hypervisor dump for secure guests
- improve selftests to use TAP interface
- enable interpretive execution of zPCI instructions (for PCI
passthrough)
- First part of deferred teardown
- CPU Topology
- PV attestation
- Minor fixes
x86:
- Permit guests to ignore single-bit ECC errors
- Intel IPI virtualization
- Allow getting/setting pending triple fault with
KVM_GET/SET_VCPU_EVENTS
- PEBS virtualization
- Simplify PMU emulation by just using PERF_TYPE_RAW events
- More accurate event reinjection on SVM (avoid retrying
instructions)
- Allow getting/setting the state of the speaker port data bit
- Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls
are inconsistent
- "Notify" VM exit (detect microarchitectural hangs) for Intel
- Use try_cmpxchg64 instead of cmpxchg64
- Ignore benign host accesses to PMU MSRs when PMU is disabled
- Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior
- Allow NX huge page mitigation to be disabled on a per-vm basis
- Port eager page splitting to shadow MMU as well
- Enable CMCI capability by default and handle injected UCNA errors
- Expose pid of vcpu threads in debugfs
- x2AVIC support for AMD
- cleanup PIO emulation
- Fixes for LLDT/LTR emulation
- Don't require refcounted "struct page" to create huge SPTEs
- Miscellaneous cleanups:
- MCE MSR emulation
- Use separate namespaces for guest PTEs and shadow PTEs bitmasks
- PIO emulation
- Reorganize rmap API, mostly around rmap destruction
- Do not workaround very old KVM bugs for L0 that runs with nesting enabled
- new selftests API for CPUID
Generic:
- Fix races in gfn->pfn cache refresh; do not pin pages tracked by
the cache
- new selftests API using struct kvm_vcpu instead of a (vm, id)
tuple"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (606 commits)
selftests: kvm: set rax before vmcall
selftests: KVM: Add exponent check for boolean stats
selftests: KVM: Provide descriptive assertions in kvm_binary_stats_test
selftests: KVM: Check stat name before other fields
KVM: x86/mmu: remove unused variable
RISC-V: KVM: Add support for Svpbmt inside Guest/VM
RISC-V: KVM: Use PAGE_KERNEL_IO in kvm_riscv_gstage_ioremap()
RISC-V: KVM: Add G-stage ioremap() and iounmap() functions
KVM: Add gfp_custom flag in struct kvm_mmu_memory_cache
RISC-V: KVM: Add extensible CSR emulation framework
RISC-V: KVM: Add extensible system instruction emulation framework
RISC-V: KVM: Factor-out instruction emulation into separate sources
RISC-V: KVM: move preempt_disable() call in kvm_arch_vcpu_ioctl_run
RISC-V: KVM: Make kvm_riscv_guest_timer_init a void function
RISC-V: KVM: Fix variable spelling mistake
RISC-V: KVM: Improve ISA extension by using a bitmap
KVM, x86/mmu: Fix the comment around kvm_tdp_mmu_zap_leafs()
KVM: SVM: Dump Virtual Machine Save Area (VMSA) to klog
KVM: x86/mmu: Treat NX as a valid SPTE bit for NPT
KVM: x86: Do not block APIC write for non ICR registers
...
Core
----
- Refactor the forward memory allocation to better cope with memory
pressure with many open sockets, moving from a per socket cache to
a per-CPU one
- Replace rwlocks with RCU for better fairness in ping, raw sockets
and IP multicast router.
- Network-side support for IO uring zero-copy send.
- A few skb drop reason improvements, including codegen the source file
with string mapping instead of using macro magic.
- Rename reference tracking helpers to a more consistent
netdev_* schema.
- Adapt u64_stats_t type to address load/store tearing issues.
- Refine debug helper usage to reduce the log noise caused by bots.
BPF
---
- Improve socket map performance, avoiding skb cloning on read
operation.
- Add support for 64 bits enum, to match types exposed by kernel.
- Introduce support for sleepable uprobes program.
- Introduce support for enum textual representation in libbpf.
- New helpers to implement synproxy with eBPF/XDP.
- Improve loop performances, inlining indirect calls when
possible.
- Removed all the deprecated libbpf APIs.
- Implement new eBPF-based LSM flavor.
- Add type match support, which allow accurate queries to the
eBPF used types.
- A few TCP congetsion control framework usability improvements.
- Add new infrastructure to manipulate CT entries via eBPF programs.
- Allow for livepatch (KLP) and BPF trampolines to attach to the same
kernel function.
Protocols
---------
- Introduce per network namespace lookup tables for unix sockets,
increasing scalability and reducing contention.
- Preparation work for Wi-Fi 7 Multi-Link Operation (MLO) support.
- Add support to forciby close TIME_WAIT TCP sockets via user-space
tools.
- Significant performance improvement for the TLS 1.3 receive path,
both for zero-copy and not-zero-copy.
- Support for changing the initial MTPCP subflow priority/backup
status
- Introduce virtually contingus buffers for sockets over RDMA,
to cope better with memory pressure.
- Extend CAN ethtool support with timestamping capabilities
- Refactor CAN build infrastructure to allow building only the needed
features.
Driver API
----------
- Remove devlink mutex to allow parallel commands on multiple links.
- Add support for pause stats in distributed switch.
- Implement devlink helpers to query and flash line cards.
- New helper for phy mode to register conversion.
New hardware / drivers
----------------------
- Ethernet DSA driver for the rockchip mt7531 on BPI-R2 Pro.
- Ethernet DSA driver for the Renesas RZ/N1 A5PSW switch.
- Ethernet DSA driver for the Microchip LAN937x switch.
- Ethernet PHY driver for the Aquantia AQR113C EPHY.
- CAN driver for the OBD-II ELM327 interface.
- CAN driver for RZ/N1 SJA1000 CAN controller.
- Bluetooth: Infineon CYW55572 Wi-Fi plus Bluetooth combo device.
Drivers
-------
- Intel Ethernet NICs:
- i40e: add support for vlan pruning
- i40e: add support for XDP framented packets
- ice: improved vlan offload support
- ice: add support for PPPoE offload
- Mellanox Ethernet (mlx5)
- refactor packet steering offload for performance and scalability
- extend support for TC offload
- refactor devlink code to clean-up the locking schema
- support stacked vlans for bridge offloads
- use TLS objects pool to improve connection rate
- Netronome Ethernet NICs (nfp):
- extend support for IPv6 fields mangling offload
- add support for vepa mode in HW bridge
- better support for virtio data path acceleration (VDPA)
- enable TSO by default
- Microsoft vNIC driver (mana)
- add support for XDP redirect
- Others Ethernet drivers:
- bonding: add per-port priority support
- microchip lan743x: extend phy support
- Fungible funeth: support UDP segmentation offload and XDP xmit
- Solarflare EF100: add support for virtual function representors
- MediaTek SoC: add XDP support
- Mellanox Ethernet/IB switch (mlxsw):
- dropped support for unreleased H/W (XM router).
- improved stats accuracy
- unified bridge model coversion improving scalability
(parts 1-6)
- support for PTP in Spectrum-2 asics
- Broadcom PHYs
- add PTP support for BCM54210E
- add support for the BCM53128 internal PHY
- Marvell Ethernet switches (prestera):
- implement support for multicast forwarding offload
- Embedded Ethernet switches:
- refactor OcteonTx MAC filter for better scalability
- improve TC H/W offload for the Felix driver
- refactor the Microchip ksz8 and ksz9477 drivers to share
the probe code (parts 1, 2), add support for phylink
mac configuration
- Other WiFi:
- Microchip wilc1000: diable WEP support and enable WPA3
- Atheros ath10k: encapsulation offload support
Old code removal:
- Neterion vxge ethernet driver: this is untouched since more than
10 years.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=hxEG
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking changes from Paolo Abeni:
"Core:
- Refactor the forward memory allocation to better cope with memory
pressure with many open sockets, moving from a per socket cache to
a per-CPU one
- Replace rwlocks with RCU for better fairness in ping, raw sockets
and IP multicast router.
- Network-side support for IO uring zero-copy send.
- A few skb drop reason improvements, including codegen the source
file with string mapping instead of using macro magic.
- Rename reference tracking helpers to a more consistent netdev_*
schema.
- Adapt u64_stats_t type to address load/store tearing issues.
- Refine debug helper usage to reduce the log noise caused by bots.
BPF:
- Improve socket map performance, avoiding skb cloning on read
operation.
- Add support for 64 bits enum, to match types exposed by kernel.
- Introduce support for sleepable uprobes program.
- Introduce support for enum textual representation in libbpf.
- New helpers to implement synproxy with eBPF/XDP.
- Improve loop performances, inlining indirect calls when possible.
- Removed all the deprecated libbpf APIs.
- Implement new eBPF-based LSM flavor.
- Add type match support, which allow accurate queries to the eBPF
used types.
- A few TCP congetsion control framework usability improvements.
- Add new infrastructure to manipulate CT entries via eBPF programs.
- Allow for livepatch (KLP) and BPF trampolines to attach to the same
kernel function.
Protocols:
- Introduce per network namespace lookup tables for unix sockets,
increasing scalability and reducing contention.
- Preparation work for Wi-Fi 7 Multi-Link Operation (MLO) support.
- Add support to forciby close TIME_WAIT TCP sockets via user-space
tools.
- Significant performance improvement for the TLS 1.3 receive path,
both for zero-copy and not-zero-copy.
- Support for changing the initial MTPCP subflow priority/backup
status
- Introduce virtually contingus buffers for sockets over RDMA, to
cope better with memory pressure.
- Extend CAN ethtool support with timestamping capabilities
- Refactor CAN build infrastructure to allow building only the needed
features.
Driver API:
- Remove devlink mutex to allow parallel commands on multiple links.
- Add support for pause stats in distributed switch.
- Implement devlink helpers to query and flash line cards.
- New helper for phy mode to register conversion.
New hardware / drivers:
- Ethernet DSA driver for the rockchip mt7531 on BPI-R2 Pro.
- Ethernet DSA driver for the Renesas RZ/N1 A5PSW switch.
- Ethernet DSA driver for the Microchip LAN937x switch.
- Ethernet PHY driver for the Aquantia AQR113C EPHY.
- CAN driver for the OBD-II ELM327 interface.
- CAN driver for RZ/N1 SJA1000 CAN controller.
- Bluetooth: Infineon CYW55572 Wi-Fi plus Bluetooth combo device.
Drivers:
- Intel Ethernet NICs:
- i40e: add support for vlan pruning
- i40e: add support for XDP framented packets
- ice: improved vlan offload support
- ice: add support for PPPoE offload
- Mellanox Ethernet (mlx5)
- refactor packet steering offload for performance and scalability
- extend support for TC offload
- refactor devlink code to clean-up the locking schema
- support stacked vlans for bridge offloads
- use TLS objects pool to improve connection rate
- Netronome Ethernet NICs (nfp):
- extend support for IPv6 fields mangling offload
- add support for vepa mode in HW bridge
- better support for virtio data path acceleration (VDPA)
- enable TSO by default
- Microsoft vNIC driver (mana)
- add support for XDP redirect
- Others Ethernet drivers:
- bonding: add per-port priority support
- microchip lan743x: extend phy support
- Fungible funeth: support UDP segmentation offload and XDP xmit
- Solarflare EF100: add support for virtual function representors
- MediaTek SoC: add XDP support
- Mellanox Ethernet/IB switch (mlxsw):
- dropped support for unreleased H/W (XM router).
- improved stats accuracy
- unified bridge model coversion improving scalability (parts 1-6)
- support for PTP in Spectrum-2 asics
- Broadcom PHYs
- add PTP support for BCM54210E
- add support for the BCM53128 internal PHY
- Marvell Ethernet switches (prestera):
- implement support for multicast forwarding offload
- Embedded Ethernet switches:
- refactor OcteonTx MAC filter for better scalability
- improve TC H/W offload for the Felix driver
- refactor the Microchip ksz8 and ksz9477 drivers to share the
probe code (parts 1, 2), add support for phylink mac
configuration
- Other WiFi:
- Microchip wilc1000: diable WEP support and enable WPA3
- Atheros ath10k: encapsulation offload support
Old code removal:
- Neterion vxge ethernet driver: this is untouched since more than 10 years"
* tag 'net-next-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1890 commits)
doc: sfp-phylink: Fix a broken reference
wireguard: selftests: support UML
wireguard: allowedips: don't corrupt stack when detecting overflow
wireguard: selftests: update config fragments
wireguard: ratelimiter: use hrtimer in selftest
net/mlx5e: xsk: Discard unaligned XSK frames on striding RQ
net: usb: ax88179_178a: Bind only to vendor-specific interface
selftests: net: fix IOAM test skip return code
net: usb: make USB_RTL8153_ECM non user configurable
net: marvell: prestera: remove reduntant code
octeontx2-pf: Reduce minimum mtu size to 60
net: devlink: Fix missing mutex_unlock() call
net/tls: Remove redundant workqueue flush before destroy
net: txgbe: Fix an error handling path in txgbe_probe()
net: dsa: Fix spelling mistakes and cleanup code
Documentation: devlink: add add devlink-selftests to the table of contents
dccp: put dccp_qpolicy_full() and dccp_qpolicy_push() in the same lock
net: ionic: fix error check for vlan flags in ionic_set_nic_features()
net: ice: fix error NETIF_F_HW_VLAN_CTAG_FILTER check in ice_vsi_sync_fltr()
nfp: flower: add support for tunnel offload without key ID
...
The double indirect bio leads to somewhat suboptimal code generation.
Instead return the (original or split) bio, and make sure the
request_queue arguments to the lower level helpers is passed after the
bio to avoid constant reshuffling of the argument passing registers.
Also give it and the helpers used to implement it more descriptive names.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220727162300.3089193-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=celk
-----END PGP SIGNATURE-----
Merge tag 'for-5.20/block-2022-07-29' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
- Improve the type checking of request flags (Bart)
- Ensure queue mapping for a single queues always picks the right queue
(Bart)
- Sanitize the io priority handling (Jan)
- rq-qos race fix (Jinke)
- Reserved tags handling improvements (John)
- Separate memory alignment from file/disk offset aligment for O_DIRECT
(Keith)
- Add new ublk driver, userspace block driver using io_uring for
communication with the userspace backend (Ming)
- Use try_cmpxchg() to cleanup the code in various spots (Uros)
- Finally remove bdevname() (Christoph)
- Clean up the zoned device handling (Christoph)
- Clean up independent access range support (Christoph)
- Clean up and improve block sysfs handling (Christoph)
- Clean up and improve teardown of block devices.
This turns the usual two step process into something that is simpler
to implement and handle in block drivers (Christoph)
- Clean up chunk size handling (Christoph)
- Misc cleanups and fixes (Bart, Bo, Dan, GuoYong, Jason, Keith, Liu,
Ming, Sebastian, Yang, Ying)
* tag 'for-5.20/block-2022-07-29' of git://git.kernel.dk/linux-block: (178 commits)
ublk_drv: fix double shift bug
ublk_drv: make sure that correct flags(features) returned to userspace
ublk_drv: fix error handling of ublk_add_dev
ublk_drv: fix lockdep warning
block: remove __blk_get_queue
block: call blk_mq_exit_queue from disk_release for never added disks
blk-mq: fix error handling in __blk_mq_alloc_disk
ublk: defer disk allocation
ublk: rewrite ublk_ctrl_get_queue_affinity to not rely on hctx->cpumask
ublk: fold __ublk_create_dev into ublk_ctrl_add_dev
ublk: cleanup ublk_ctrl_uring_cmd
ublk: simplify ublk_ch_open and ublk_ch_release
ublk: remove the empty open and release block device operations
ublk: remove UBLK_IO_F_PREFLUSH
ublk: add a MAINTAINERS entry
block: don't allow the same type rq_qos add more than once
mmc: fix disk/queue leak in case of adding disk failure
ublk_drv: fix an IS_ERR() vs NULL check
ublk: remove UBLK_IO_F_INTEGRITY
ublk_drv: remove unneeded semicolon
...
Case (1):
The only waiter on wka_port->completion_wq is zfcp_fc_wka_port_get()
trying to open a WKA port. As such it should only be woken up by WKA port
*open* responses, not by WKA port close responses.
Case (2):
A close WKA port response coming in just after having sent a new open WKA
port request and before blocking for the open response with wait_event()
in zfcp_fc_wka_port_get() erroneously renders the wait_event a NOP
because the close handler overwrites wka_port->status. Hence the
wait_event condition is erroneously true and it does not enter blocking
state.
With non-negligible probability, the following time space sequence happens
depending on timing without this fix:
user process ERP thread zfcp work queue tasklet system work queue
============ ========== =============== ======= =================
$ echo 1 > online
zfcp_ccw_set_online
zfcp_ccw_activate
zfcp_erp_adapter_reopen
msleep scan backoff zfcp_erp_strategy
| ...
| zfcp_erp_action_cleanup
| ...
| queue delayed scan_work
| queue ns_up_work
| ns_up_work:
| zfcp_fc_wka_port_get
| open wka request
| open response
| GSPN FC-GS
| RSPN FC-GS [NPIV-only]
| zfcp_fc_wka_port_put
| (--wka->refcount==0)
| sched delayed wka->work
|
~~~Case (1)~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
zfcp_erp_wait
flush scan_work
| wka->work:
| wka->status=CLOSING
| close wka request
| scan_work:
| zfcp_fc_wka_port_get
| (wka->status==CLOSING)
| wka->status=OPENING
| open wka request
| wait_event
| | close response
| | wka->status=OFFLINE
| | wake_up /*WRONG*/
~~~Case (2)~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| wka->work:
| wka->status=CLOSING
| close wka request
zfcp_erp_wait
flush scan_work
| scan_work:
| zfcp_fc_wka_port_get
| (wka->status==CLOSING)
| wka->status=OPENING
| open wka request
| close response
| wka->status=OFFLINE
| wake_up /*WRONG&NOP*/
| wait_event /*NOP*/
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| (wka->status!=ONLINE)
| return -EIO
| return early
open response
wka->status=ONLINE
wake_up /*NOP*/
So we erroneously end up with no automatic port scan. This is a big problem
when it happens during boot. The timing is influenced by v3.19 commit
18f87a67e6 ("zfcp: auto port scan resiliency").
Fix it by fully mutually excluding zfcp_fc_wka_port_get() and
zfcp_fc_wka_port_offline(). For that to work, we make the latter block
until we got the response for a close WKA port. In order not to penalize
the system workqueue, we move wka_port->work to our own adapter workqueue.
Note that before v2.6.30 commit 828bc1212a ("[SCSI] zfcp: Set WKA-port to
offline on adapter deactivation"), zfcp did block in
zfcp_fc_wka_port_offline() as well, but with a different condition.
While at it, make non-functional cleanups to improve code reading in
zfcp_fc_wka_port_get(). If we cannot send the WKA port open request, don't
rely on the subsequent wait_event condition to immediately let this case
pass without blocking. Also don't want to rely on the additional condition
handling the refcount to be skipped just to finally return with -EIO.
Link: https://lore.kernel.org/r/20220729162529.1620730-1-maier@linux.ibm.com
Fixes: 5ab944f97e ("[SCSI] zfcp: attach and release SAN nameserver port on demand")
Cc: <stable@vger.kernel.org> #v2.6.28+
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If a subchannel is busy when a close is performed, the subchannel
needs to be quiesced and left nice and tidy, so nothing unexpected
(like a solicited interrupt) shows up while in the closed state.
Unfortunately, the return code from this call isn't checked,
so any busy subchannel is treated as a failing one.
Fix that, so that the close on a busy subchannel happens normally.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20220728204914.2420989-4-farman@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Now that neither vfio_ccw_sch_probe() nor vfio_ccw_mdev_probe()
affect the FSM state, it doesn't make sense for their _remove()
counterparts try to revert things in this way. Since the FSM open
and close are handled alongside MDEV open/close, these are
unnecessary.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20220728204914.2420989-3-farman@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
As pointed out with the simplification of the
VFIO_IOMMU_NOTIFY_DMA_UNMAP notifier [1], the length
parameter was never used to check against the pinned
pages.
Let's correct that, and see if a page is within the
affected range instead of simply the first page of
the range.
[1] https://lore.kernel.org/kvm/20220720170457.39cda0d0.alex.williamson@redhat.com/
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20220728204914.2420989-2-farman@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
KVM/s390, KVM/x86 and common infrastructure changes for 5.20
x86:
* Permit guests to ignore single-bit ECC errors
* Fix races in gfn->pfn cache refresh; do not pin pages tracked by the cache
* Intel IPI virtualization
* Allow getting/setting pending triple fault with KVM_GET/SET_VCPU_EVENTS
* PEBS virtualization
* Simplify PMU emulation by just using PERF_TYPE_RAW events
* More accurate event reinjection on SVM (avoid retrying instructions)
* Allow getting/setting the state of the speaker port data bit
* Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls are inconsistent
* "Notify" VM exit (detect microarchitectural hangs) for Intel
* Cleanups for MCE MSR emulation
s390:
* add an interface to provide a hypervisor dump for secure guests
* improve selftests to use TAP interface
* enable interpretive execution of zPCI instructions (for PCI passthrough)
* First part of deferred teardown
* CPU Topology
* PV attestation
* Minor fixes
Generic:
* new selftests API using struct kvm_vcpu instead of a (vm, id) tuple
x86:
* Use try_cmpxchg64 instead of cmpxchg64
* Bugfixes
* Ignore benign host accesses to PMU MSRs when PMU is disabled
* Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior
* x86/MMU: Allow NX huge pages to be disabled on a per-vm basis
* Port eager page splitting to shadow MMU as well
* Enable CMCI capability by default and handle injected UCNA errors
* Expose pid of vcpu threads in debugfs
* x2AVIC support for AMD
* cleanup PIO emulation
* Fixes for LLDT/LTR emulation
* Don't require refcounted "struct page" to create huge SPTEs
x86 cleanups:
* Use separate namespaces for guest PTEs and shadow PTEs bitmasks
* PIO emulation
* Reorganize rmap API, mostly around rmap destruction
* Do not workaround very old KVM bugs for L0 that runs with nesting enabled
* new selftests API for CPUID
Use the possessive "its" instead of the contraction "it's"
where appropriate.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: linux-s390@vger.kernel.org
Link: https://lore.kernel.org/r/20220715020010.12678-1-rdunlap@infradead.org
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Pull changes that finalize switching of copy_oldmem_page() callback
to iov_iter interface. These changes were pulled in work.iov_iter of
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs.git
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Make the DMBE bits, which are passed on individually in ism_move() as
parameter idx, available to the receiver.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Signed-off-by: Wenjia Zhang < wenjia@linux.ibm.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reworked signature of the function to retrieve the system EID: No plausible
reason to use a double pointer. And neither to pass in the device as an
argument, as this identifier is by definition per system, not per device.
Plus some minor consistency edits.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Signed-off-by: Wenjia Zhang < wenjia@linux.ibm.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Most of the callers of vfio_pin_pages() want "struct page *" and the
low-level mm code to pin pages returns a list of "struct page *" too.
So there's no gain in converting "struct page *" to PFN in between.
Replace the output parameter "phys_pfn" list with a "pages" list, to
simplify callers. This also allows us to replace the vfio_iommu_type1
implementation with a more efficient one.
And drop the pfn_valid check in the gvt code, as there is no need to
do such a check at a page-backed struct page pointer.
For now, also update vfio_iommu_type1 to fit this new parameter too.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/20220723020256.30081-11-nicolinc@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
A PFN is not secure enough to promise that the memory is not IO. And
direct access via memcpy() that only handles CPU memory will crash on
S390 if the PFN is an IO PFN, as we have to use the memcpy_to/fromio()
that uses the special S390 IO access instructions. On the other hand,
a "struct page *" is always a CPU coherent thing that fits memcpy().
Also, casting a PFN to "void *" for memcpy() is not a proper practice,
kmap_local_page() is the correct API to call here, though S390 doesn't
use highmem, which means kmap_local_page() is a NOP.
There's a following patch changing the vfio_pin_pages() API to return
a list of "struct page *" instead of PFNs. It will block any IO memory
from ever getting into this call path, for such a security purpose. In
this patch, add kmap_local_page() to prepare for that.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/20220723020256.30081-10-nicolinc@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The vfio_ccw_cp code maintains both iova and its PFN list because the
vfio_pin/unpin_pages API wanted pfn list. Since vfio_pin/unpin_pages()
now accept "iova", change to maintain only pa_iova list and rename all
"pfn_array" strings to "page_array", so as to simplify the code.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/20220723020256.30081-8-nicolinc@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The vfio_ap_ops code maintains both nib address and its PFN, which
is redundant, merely because vfio_pin/unpin_pages API wanted pfn.
Since vfio_pin/unpin_pages() now accept "iova", change "saved_pfn"
to "saved_iova" and remove pfn in the vfio_ap_validate_nib().
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/20220723020256.30081-7-nicolinc@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The vfio_pin/unpin_pages() so far accepted arrays of PFNs of user IOVA.
Among all three callers, there was only one caller possibly passing in
a non-contiguous PFN list, which is now ensured to have contiguous PFN
inputs too.
Pass in the starting address with "iova" alone to simplify things, so
callers no longer need to maintain a PFN list or to pin/unpin one page
at a time. This also allows VFIO to use more efficient implementations
of pin/unpin_pages.
For now, also update vfio_iommu_type1 to fit this new parameter too,
while keeping its input intact (being user_iova) since we don't want
to spend too much effort swapping its parameters and local variables
at that level.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/20220723020256.30081-6-nicolinc@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This driver is the only caller of vfio_pin/unpin_pages that might pass
in a non-contiguous PFN list, but in many cases it has a contiguous PFN
list to process. So letting VFIO API handle a non-contiguous PFN list
is actually counterproductive.
Add a pair of simple loops to pass in contiguous PFNs only, to have an
efficient implementation in VFIO.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/20220723020256.30081-5-nicolinc@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The ap_aqic() is called by vfio_ap_irq_enable() where it passes in a
virt value that's casted from a physical address "h_nib". Inside the
ap_aqic(), it does virt_to_phys() again.
Since ap_aqic() needs a physical address, let's just pass in a pa of
ind directly. So change the "ind" to "pa_ind".
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/20220723020256.30081-4-nicolinc@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Instead of having drivers register the notifier with explicit code just
have them provide a dma_unmap callback op in their driver ops and rely on
the core code to wire it up.
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v4-681e038e30fd+78-vfio_unmap_notif_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Make it possible to handle not only single-, but also multi-
segment iterators in copy_oldmem_iter() callback. Change the
semantics of called functions to match the iterator model -
instead of an error code the exact number of bytes copied is
returned.
The swap page used to copy data to user space is adopted for
kernel space too. That does not bring any performance impact.
Suggested-by: Matthew Wilcox <willy@infradead.org>
Fixes: cc02e6e21a ("s390/crash: add missing iterator advance in copy_oldmem_page()")
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Link: https://lore.kernel.org/r/5af6da3a0bffe48a90b0b7139ecf6a818b2d18e8.1658206891.git.agordeev@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Memory buffer used for reading out data from hardware system
area is not protected against concurrent access.
Reported-by: Matthew Wilcox <willy@infradead.org>
Fixes: 411ed32257 ("[S390] zfcpdump support.")
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Link: https://lore.kernel.org/r/e68137f0f9a0d2558f37becc20af18e2939934f6.1658206891.git.agordeev@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Make sure the uvdevice driver will be automatically loaded when
facility 158 is available.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20220713125644.16121-4-seiden@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Rework cpufeature implementation to allow for various cpu feature
indications, which is not only limited to hwcap bits. This is achieved
by adding a sequential list of cpu feature numbers, where each of them
is mapped to an entry which indicates what this number is about.
Each entry contains a type member, which indicates what feature
name space to look into (e.g. hwcap, or cpu facility). If wanted this
allows also to automatically load modules only in e.g. z/VM
configurations.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Link: https://lore.kernel.org/r/20220713125644.16121-2-seiden@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
This patch implements two new AP driver callbacks:
void (*on_config_changed)(struct ap_config_info *new_config_info,
struct ap_config_info *old_config_info);
void (*on_scan_complete)(struct ap_config_info *new_config_info,
struct ap_config_info *old_config_info);
The on_config_changed callback is invoked at the start of the AP bus scan
function when it determines that the host AP configuration information
has changed since the previous scan.
The vfio_ap device driver registers a callback function for this callback
that performs the following operations:
1. Unplugs the adapters, domains and control domains removed from the
host's AP configuration from the guests to which they are
assigned in a single operation.
2. Stores bitmaps identifying the adapters, domains and control domains
added to the host's AP configuration with the structure representing
the mediated device. When the vfio_ap device driver's probe callback is
subsequently invoked, the probe function will recognize that the
queue is being probed due to a change in the host's AP configuration
and the plugging of the queue into the guest will be bypassed.
The on_scan_complete callback is invoked after the ap bus scan is
completed if the host AP configuration data has changed. The vfio_ap
device driver registers a callback function for this callback that hot
plugs each queue and control domain added to the AP configuration for each
guest using them in a single hot plug operation.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The matrix of adapters and domains configured in a guest's APCB may
differ from the matrix of adapters and domains assigned to the matrix mdev,
so this patch introduces a sysfs attribute to display the matrix of
adapters and domains that are or will be assigned to the APCB of a guest
that is or will be using the matrix mdev. For a matrix mdev denoted by
$uuid, the guest matrix can be displayed as follows:
cat /sys/devices/vfio_ap/matrix/$uuid/guest_matrix
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Let's implement the callback to indicate when an APQN
is in use by the vfio_ap device driver. The callback is
invoked whenever a change to the apmask or aqmask would
result in one or more queue devices being removed from the driver. The
vfio_ap device driver will indicate a resource is in use
if the APQN of any of the queue devices to be removed are assigned to
any of the matrix mdevs under the driver's control.
There is potential for a deadlock condition between the
matrix_dev->guests_lock used to lock the guest during assignment of
adapters and domains and the ap_perms_mutex locked by the AP bus when
changes are made to the sysfs apmask/aqmask attributes.
The AP Perms lock controls access to the objects that store the adapter
numbers (ap_perms) and domain numbers (aq_perms) for the sysfs
/sys/bus/ap/apmask and /sys/bus/ap/aqmask attributes. These attributes
identify which queues are reserved for the zcrypt default device drivers.
Before allowing a bit to be removed from either mask, the AP bus must check
with the vfio_ap device driver to verify that none of the queues are
assigned to any of its mediated devices.
The apmask/aqmask attributes can be written or read at any time from
userspace, so care must be taken to prevent a deadlock with asynchronous
operations that might be taking place in the vfio_ap device driver. For
example, consider the following:
1. A system administrator assigns an adapter to a mediated device under the
control of the vfio_ap device driver. The driver will need to first take
the matrix_dev->guests_lock to potentially hot plug the adapter into
the KVM guest.
2. At the same time, a system administrator sets a bit in the sysfs
/sys/bus/ap/ap_mask attribute. To complete the operation, the AP bus
must:
a. Take the ap_perms_mutex lock to update the object storing the values
for the /sys/bus/ap/ap_mask attribute.
b. Call the vfio_ap device driver's in-use callback to verify that the
queues now being reserved for the default zcrypt drivers are not
assigned to a mediated device owned by the vfio_ap device driver. To
do the verification, the in-use callback function takes the
matrix_dev->guests_lock, but has to wait because it is already held
by the operation in 1 above.
3. The vfio_ap device driver calls an AP bus function to verify that the
new queues resulting from the assignment of the adapter in step 1 are
not reserved for the default zcrypt device driver. This AP bus function
tries to take the ap_perms_mutex lock but gets stuck waiting for the
waiting for the lock due to step 2a above.
Consequently, we have the following deadlock situation:
matrix_dev->guests_lock locked (1)
ap_perms_mutex lock locked (2a)
Waiting for matrix_dev->gusts_lock (2b) which is currently held (1)
Waiting for ap_perms_mutex lock (3) which is currently held (2a)
To prevent this deadlock scenario, the function called in step 3 will no
longer take the ap_perms_mutex lock and require the caller to take the
lock. The lock will be the first taken by the adapter/domain assignment
functions in the vfio_ap device driver to maintain the proper locking
order.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
When an adapter or domain is unassigned from an mdev attached to a KVM
guest, one or more of the guest's queues may get dynamically removed. Since
the removed queues could get re-assigned to another mdev, they need to be
reset. So, when an adapter or domain is unassigned from the mdev, the
queues that are removed from the guest's AP configuration (APCB) will be
reset.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
When an AP queue device is probed or removed, if the mediated device is
attached to a KVM guest, the mediated device's adapter, domain and
control domain bitmaps must be filtered to update the guest's APCB and if
any changes are detected, the guest's APCB must then be hot plugged into
the guest to reflect those changes to the guest.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Let's hot plug an adapter, domain or control domain into the guest when it
is assigned to a matrix mdev that is attached to a KVM guest. Likewise,
let's hot unplug an adapter, domain or control domain from the guest when
it is unassigned from a matrix_mdev that is attached to a KVM guest.
Whenever an assignment or unassignment of an adapter, domain or control
domain is performed, the APQNs and control domains assigned to the matrix
mdev will be filtered and assigned to the AP control block
(APCB) that supplies the AP configuration to the guest so that no
adapter, domain or control domain that is not in the host's AP
configuration nor any APQN that does not reference a queue device bound
to the vfio_ap device driver is assigned.
After updating the APCB, if the mdev is in use by a KVM guest, it is
hot plugged into the guest to dynamically provide access to the adapters,
domains and control domains provided via the newly refreshed APCB.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The callback functions for probing and removing a queue device must take
and release the locks required to perform a dynamic update of a guest's
APCB in the proper order.
The proper order for taking the locks is:
matrix_dev->guests_lock => kvm->lock => matrix_dev->mdevs_lock
The proper order for releasing the locks is:
matrix_dev->mdevs_lock => kvm->lock => matrix_dev->guests_lock
A new helper function is introduced to be used by the probe callback to
acquire the required locks. Since the probe callback only has
access to a queue device when it is called, the helper function will find
the ap_matrix_mdev object to which the queue device's APQN is assigned and
return it so the KVM guest to which the mdev is attached can be dynamically
updated.
Note that in order to find the ap_matrix_mdev (matrix_mdev) object, it is
necessary to search the matrix_dev->mdev_list. This presents a
locking order dilemma because the matrix_dev->mdevs_lock can't be taken to
protect against changes to the list while searching for the matrix_mdev to
which a queue device's APQN is assigned. This is due to the fact that the
proper locking order requires that the matrix_dev->mdevs_lock be taken
after both the matrix_mdev->kvm->lock and the matrix_dev->mdevs_lock.
Consequently, the matrix_dev->guests_lock will be used to protect against
removal of a matrix_mdev object from the list while a queue device is
being probed. This necessitates changes to the mdev probe/remove
callback functions to take the matrix_dev->guests_lock prior to removing
a matrix_mdev object from the list.
A new macro is also introduced to acquire the locks required to dynamically
update the guest's APCB in the proper order when a queue device is
removed.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The functions backing the matrix mdev's sysfs attribute interfaces to
assign/unassign adapters, domains and control domains must take and
release the locks required to perform a dynamic update of a guest's APCB
in the proper order.
The proper order for taking the locks is:
matrix_dev->guests_lock => kvm->lock => matrix_dev->mdevs_lock
The proper order for releasing the locks is:
matrix_dev->mdevs_lock => kvm->lock => matrix_dev->guests_lock
Two new macros are introduced for this purpose: One to take the locks and
the other to release the locks. These macros will be used by the
assignment/unassignment functions to prepare for dynamic update of
the KVM guest's APCB.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The group notifier that handles the VFIO_GROUP_NOTIFY_SET_KVM event must
use the required locks in proper locking order to dynamically update the
guest's APCB. The proper locking order is:
1. matrix_dev->guests_lock: required to use the KVM pointer to
update a KVM guest's APCB.
2. matrix_mdev->kvm->lock: required to update a KVM guest's APCB.
3. matrix_dev->mdevs_lock: required to store or access the data
stored in a struct ap_matrix_mdev instance.
Two macros are introduced to acquire and release the locks in the proper
order. These macros are now used by the group notifier functions.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The vfio_ap device driver registers for notification when the pointer to
the KVM object for a guest is set. Recall that the KVM lock (kvm->lock)
mutex must be taken outside of the matrix_dev->lock mutex to prevent the
reporting by lockdep of a circular locking dependency (a.k.a., a lockdep
splat):
* see commit 0cc00c8d40 ("Fix circular lockdep when setting/clearing
crypto masks")
* see commit 86956e7076 ("replace open coded locks for
VFIO_GROUP_NOTIFY_SET_KVM notification")
With the introduction of support for hot plugging/unplugging AP devices
passed through to a KVM guest, a new guests_lock mutex is introduced to
ensure the proper locking order is maintained:
struct ap_matrix_dev {
...
struct mutex guests_lock;
...
}
The matrix_dev->guests_lock controls access to the matrix_mdev instances
that hold the state for AP devices that have been passed through to a
KVM guest. This lock must be held to control access to the KVM pointer
(matrix_mdev->kvm) while the vfio_ap device driver is using it to
plug/unplug AP devices passed through to the KVM guest.
Keep in mind, the proper locking order must be maintained whenever
dynamically updating a KVM guest's APCB to plug/unplug adapters, domains
and control domains:
1. matrix_dev->guests_lock: required to use the KVM pointer - stored in
a struct ap_matrix_mdev instance - to update a KVM guest's APCB
2. matrix_mdev->kvm->lock: required to update a guest's APCB
3. matrix_dev->mdevs_lock: required to access data stored in a
struct ap_matrix_mdev instance.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The matrix_dev->lock mutex is being renamed to matrix_dev->mdevs_lock to
better reflect its purpose, which is to control access to the state of the
mediated devices under the control of the vfio_ap device driver.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The current implementation does not allow assignment of an AP adapter or
domain to an mdev device if each APQN resulting from the assignment
does not reference an AP queue device that is bound to the vfio_ap device
driver. This patch allows assignment of AP resources to the matrix mdev as
long as the APQNs resulting from the assignment:
1. Are not reserved by the AP BUS for use by the zcrypt device drivers.
2. Are not assigned to another matrix mdev.
The rationale behind this is that the AP architecture does not preclude
assignment of APQNs to an AP configuration profile that are not available
to the system.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Refresh the guest's APCB by filtering the APQNs and control domain numbers
assigned to the matrix mdev.
Filtering of APQNs:
-----------------
APQNs that do not reference an AP queue device bound to the vfio_ap device
driver must be filtered from the APQNs assigned to the matrix mdev before
they can be assigned to the guest's APCB. Given that the APQNs are
configured in the guest's APCB as a matrix of APIDs (adapters) and APQIs
(domains), it is not possible to filter an individual APQN. For example,
suppose the matrix of APQNs is structured as follows:
APIDs
3 4 5
0 (3,0) (4,0) (5,0)
APQIs 1 (3,1) (4,1) (5,1)
2 (3,2) (4,2) (5,2)
Now suppose APQN (4,1) does not reference a queue device bound to the
vfio_ap device driver. If we filter APID 4, the APQNs (4,0), (4,1) and
(4,2) will be removed. Similarly, if we filter domain 1, APQNs (3,1),
(4,1) and (5,1) will be removed.
To resolve this dilemma, the choice was made to filter the APID - in this
case 4 - from the guest's APCB. The reason for this design decision is
because the APID references an AP adapter which is a real hardware device
that can be physically installed, removed, enabled or disabled; whereas, a
domain is a partition within the adapter. It therefore better reflects
reality to remove the APID from the guest's APCB.
Filtering of control domains:
----------------------------
Any control domains that are not assigned to the host's AP configuration
will be filtered from those assigned to the matrix mdev before assigning
them to the guest's APCB.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The APCB is a field within the CRYCB that provides the AP configuration
to a KVM guest. Let's introduce a shadow copy of the KVM guest's APCB and
maintain it for the lifespan of the guest.
The shadow APCB serves the following purposes:
1. The shadow APCB can be maintained even when the mediated device is not
currently in use by a KVM guest. Since the mediated device's AP
configuration is filtered to ensure that no AP queues are passed through
to the KVM guest that are not bound to the vfio_ap device driver or
available to the host, the mediated device's AP configuration may differ
from the guest's. Having a shadow of a guest's APCB allows us to provide
a sysfs interface to view the guest's APCB even if the mediated device
is not currently passed through to a KVM guest. This can aid in
problem determination when the guest is unexpectedly missing AP
resources.
2. If filtering was done in-place for the real APCB, the guest could pick
up a transient state. Doing the filtering on a shadow and transferring
the AP configuration to the real APCB after the guest is started or when
AP resources are assigned to or unassigned from the mediated device, or
when the host configuration changes, the guest's AP configuration will
never be in a transient state.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Let's create links between each queue device bound to the vfio_ap device
driver and the matrix mdev to which the queue's APQN is assigned. The idea
is to facilitate efficient retrieval of the objects representing the queue
devices and matrix mdevs as well as to verify that a queue assigned to
a matrix mdev is bound to the driver.
The links will be created as follows:
* When the queue device is probed, if its APQN is assigned to a matrix
mdev, the structures representing the queue device and the matrix mdev
will be linked.
* When an adapter or domain is assigned to a matrix mdev, for each new
APQN assigned that references a queue device bound to the vfio_ap
device driver, the structures representing the queue device and the
matrix mdev will be linked.
The links will be removed as follows:
* When the queue device is removed, if its APQN is assigned to a matrix
mdev, the link from the structure representing the matrix mdev to the
structure representing the queue will be removed. Since the storage
allocated for the vfio_ap_queue will be freed, there is no need to
remove the link to the matrix_mdev to which the queue's APQN is
assigned.
* When an adapter or domain is unassigned from a matrix mdev, for each
APQN unassigned that references a queue device bound to the vfio_ap
device driver, the structures representing the queue device and the
matrix mdev will be unlinked.
* When an mdev is removed, the link from any queues assigned to the mdev
to the mdev will be removed.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Let's move the probe and remove callbacks into the vfio_ap_ops.c
file to keep all code related to managing queues in a single file. This
way, all functions related to queue management can be removed from the
vfio_ap_private.h header file defining the public interfaces for the
vfio_ap device driver.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
This patch refactors the vfio_ap device driver to use the AP bus's
ap_get_qdev() function to retrieve the vfio_ap_queue struct containing
information about a queue that is bound to the vfio_ap device driver.
The bus's ap_get_qdev() function retrieves the queue device from a
hashtable keyed by APQN. This is much more efficient than looping over
the list of devices attached to the AP bus by several orders of
magnitude.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
- Fix building of out-of-tree kernel modules without a pre-built
kernel in case CONFIG_EXPOLINE_EXTERN=y.
- Fix a reference counting error that could prevent unloading of
zcrypt modules.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCYtHZUxccYWdvcmRlZXZA
bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8ENUAP90iq8LRvI+F16ckFOZSr+r38Mh
FL0eJSiX840uBevfugEAwxXB8xR6qvqW2x6+44NzTXk+gosjZkAv0kb+I0zd0Ag=
=XCBM
-----END PGP SIGNATURE-----
Merge tag 's390-5.19-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Fix building of out-of-tree kernel modules without a pre-built kernel
in case CONFIG_EXPOLINE_EXTERN=y.
- Fix a reference counting error that could prevent unloading of zcrypt
modules.
* tag 's390-5.19-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/ap: fix error handling in __verify_queue_reservations()
s390/nospec: remove unneeded header includes
s390/nospec: build expoline.o for modules_prepare target
The AP bus's __verify_queue_reservations function increments the ref count
for the device driver passed in as a parameter, but fails to decrement it
before returning control to the caller. This will prevents any subsequent
removal of the module.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reported-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Fixes: 4f8206b882 ("s390/ap: driver callback to indicate resource in use")
Link: https://lore.kernel.org/r/20220706222619.602094-1-akrowiak@linux.ibm.com
Cc: stable@vger.kernel.org
[agordeev@linux.ibm.com fixed description, added Fixes and Link]
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
When doing device passthrough where interrupts are being forwarded from
host to guest, we wish to use a pinned section of guest memory as the
vector (the same memory used by the guest as the vector). To accomplish
this, add a new parameter for airq_iv_create which allows passing an
existing vector to be used instead of allocating a new one. The caller
is responsible for ensuring the vector is pinned in memory as well as for
unpinning the memory when the vector is no longer needed.
A subsequent patch will use this new parameter for zPCI interpretation.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20220606203325.110625-7-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
A subsequent patch will introduce an airq handler that requires additional
TPI information beyond directed vs floating, so pass the entire tpi_info
structure via the handler. Only pci actually uses this information today,
for the other airq handlers this is effectively a no-op.
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20220606203325.110625-6-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Detect the Adapter Interruption Source ID Interpretation facility.
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20220606203325.110625-3-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
These attributes are now only accessed through the
zfcp_sysfs_sdev_attr_group.
Link: https://lore.kernel.org/r/0791b9149ebfa39e6b8eab093113cd2527dbf3d3.1657122360.git.bblock@linux.ibm.com
Fixes: d8d7cf3f7d ("scsi: zfcp: Switch to attribute groups")
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Part of the confusion that has existed is the FSM lifecycle of
subchannels between the common CSS driver and the vfio-ccw driver.
During configuration, the FSM state goes from NOT_OPER to STANDBY
to IDLE, but then back to NOT_OPER. For example:
vfio_ccw_sch_probe: VFIO_CCW_STATE_NOT_OPER
vfio_ccw_sch_probe: VFIO_CCW_STATE_STANDBY
vfio_ccw_mdev_probe: VFIO_CCW_STATE_IDLE
vfio_ccw_mdev_remove: VFIO_CCW_STATE_NOT_OPER
vfio_ccw_sch_remove: VFIO_CCW_STATE_NOT_OPER
vfio_ccw_sch_shutdown: VFIO_CCW_STATE_NOT_OPER
Rearrange the open/close events to align with the mdev open/close,
to better manage the memory and state of the devices as time
progresses. Specifically, make mdev_open() perform the FSM open,
and mdev_close() perform the FSM close instead of reset (which is
both close and open).
This makes the NOT_OPER state a dead-end path, indicating the
device is probably not recoverable without fully probing and
re-configuring the device.
This has the nice side-effect of removing a number of special-cases
where the FSM state is managed outside of the FSM itself (such as
the aforementioned mdev_close() routine).
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20220707135737.720765-12-farman@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Use both the FSM Close and Open events when resetting an mdev,
rather than making a separate call to cio_enable_subchannel().
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20220707135737.720765-11-farman@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Refactor the vfio_ccw_sch_quiesce() routine to extract the bit that
disables the subchannel and affects the FSM state. Use this to form
the basis of a CLOSE event that will mirror the OPEN event, and move
the subchannel back to NOT_OPER state.
A key difference with that mirroring is that while OPEN handles the
transition from NOT_OPER => STANDBY, the later probing of the mdev
handles the transition from STANDBY => IDLE. On the other hand,
the CLOSE event will move from one of the operating states {IDLE,
CP_PROCESSING, CP_PENDING} => NOT_OPER. That is, there is no stop
in a STANDBY state on the deconfigure path.
Add a call to cp_free() in this event, such that it is captured for
the various permutations of this event.
In the unlikely event that cio_disable_subchannel() returns -EBUSY,
the remaining logic of vfio_ccw_sch_quiesce() can still be used.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20220707135737.720765-10-farman@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Move the process of enabling a subchannel for use by vfio-ccw
into the FSM, such that it can manage the sequence of lifecycle
events for the device.
That is, if the FSM state is NOT_OPER(erational), then do the work
that would enable the subchannel and move the FSM to STANDBY state.
An attempt to perform this event again from any of the other operating
states (IDLE, CP_PROCESSING, CP_PENDING) will convert the device back
to NOT_OPER so the configuration process can be started again.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20220707135737.720765-9-farman@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
We currently cut a very basic trace whenever the FSM directs
control to the not operational routine.
Convert this to a message, so it's alongside the other configuration
related traces (create, remove, etc.), and record both the event
that brought us here and the current state of the device.
This will provide some better footprints if things go bad.
Suggested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20220707135737.720765-8-farman@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The vfio_ccw_mdev_(un)reg routines are merely vfio-ccw routines that
pass control to mdev_(un)register_device. Since there's only one
caller of each, let's just call the mdev routines directly.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20220707135737.720765-7-farman@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The FSM has an enumerated list of events defined.
Use that as the argument passed to the jump table,
instead of a regular int.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20220707135737.720765-6-farman@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
There are no remaining users of private->mdev. Remove it.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20220707135737.720765-5-farman@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The routine vfio_ccw_sch_event() is tasked with handling subchannel events,
specifically machine checks, on behalf of vfio-ccw. It correctly calls
cio_update_schib(), and if that fails (meaning the subchannel is gone)
it makes an FSM event call to mark the subchannel Not Operational.
If that worked, however, then it decides that if the FSM state was already
Not Operational (implying the subchannel just came back), then it should
simply change the FSM to partially- or fully-open.
Remove this trickery, since a subchannel returning will require more
probing than simply "oh all is well again" to ensure it works correctly.
Fixes: bbe37e4cb8 ("vfio: ccw: introduce a finite state machine")
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20220707135737.720765-4-farman@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The FSM is in STANDBY state when arriving in vfio_ccw_mdev_probe(),
and this routine converts it to IDLE as part of its processing.
The error exit sets it to IDLE (again) but clears the private->mdev
pointer.
The FSM should of course be managing the state itself, but the
correct thing for vfio_ccw_mdev_probe() to do would be to put
the state back the way it found it.
The corresponding check of private->mdev in vfio_ccw_sch_io_todo()
can be removed, since the distinction is unnecessary at this point.
Fixes: 3bf1311f35 ("vfio/ccw: Convert to use vfio_register_emulated_iommu_dev()")
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20220707135737.720765-3-farman@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
As vfio-ccw devices are created/destroyed, the uuid of the associated
mdevs that are recorded in $S390DBF/vfio_ccw_msg/sprintf get lost.
This is because a pointer to the UUID is stored instead of the UUID
itself, and that memory may have been repurposed if/when the logs are
examined. The result is usually garbage UUID data in the logs, though
there is an outside chance of an oops happening here.
Simply remove the UUID from the traces, as the subchannel number will
provide useful configuration information for problem determination,
and is stored directly into the log instead of a pointer.
As we were the only consumer of mdev_uuid(), remove that too.
Cc: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Michael Kawano <mkawano@linux.ibm.com>
Fixes: 60e05d1cf0 ("vfio-ccw: add some logging")
Fixes: b7701dfbf9 ("vfio-ccw: Register a chp_event callback for vfio-ccw")
[farman: reworded commit message, added Fixes: tags]
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Link: https://lore.kernel.org/r/20220707135737.720765-2-farman@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
With new API blk_mq_is_reserved_rq() we can tell if a request is from
the reserved pool, so stop passing 'reserved' arg. There is actually
only a single user of that arg for all the callback implementations, which
can use blk_mq_is_reserved_rq() instead.
This will also allow us to stop passing the same 'reserved' around the
blk-mq iter functions next.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/1657109034-206040-4-git-send-email-john.garry@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- Fix purgatory build process so bin2c tool does not get built
unnecessarily and the Makefile is more consistent with other
architectures.
- Return earlier simple design of arch_get_random_seed_long|int()
and arch_get_random_long|int() callbacks as result of changes
in generic RNG code.
- Fix minor comment typos and spelling mistakes.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCYr63pxccYWdvcmRlZXZA
bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8FgXAQCWbdCbbMkkFJzqNa8zz0m6NrWe
81G58wQN2qrZMl9NnQD+IyYAEI59j72LG/yPAfBr2QKfqLb2ufIwH9Z6FA408QE=
=evBx
-----END PGP SIGNATURE-----
Merge tag 's390-5.19-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Fix purgatory build process so bin2c tool does not get built
unnecessarily and the Makefile is more consistent with other
architectures.
- Return earlier simple design of arch_get_random_seed_long|int() and
arch_get_random_long|int() callbacks as result of changes in generic
RNG code.
- Fix minor comment typos and spelling mistakes.
* tag 's390-5.19-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/qdio: Fix spelling mistake
s390/sclp: Fix typo in comments
s390/archrandom: simplify back to earlier design and initialize earlier
s390/purgatory: remove duplicated build rule of kexec-purgatory.o
s390/purgatory: hard-code obj-y in Makefile
s390: remove unneeded 'select BUILD_BIN2C'
blk_cleanup_disk is nothing but a trivial wrapper for put_disk now,
so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20220619060552.1850436-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Set the queue dying flag and call blk_mq_exit_queue from del_gendisk for
all disks that do not have separately allocated queues, and thus remove
the need to call blk_cleanup_queue for them.
Rename blk_cleanup_disk to blk_mq_destroy_queue to make it clear that
this function is intended only for separately allocated blk-mq queues.
This saves an extra queue freeze for devices without a separately
allocated queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20220619060552.1850436-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The use of 'extern' in function prototypes has been disrecommended in
the kernel coding style for several years now, remove them from all vfio
related files so contributors no longer need to decide between style and
consistency.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/165471414407.203056.474032786990662279.stgit@omen
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
We try to harden virtio device notifications in 8b4ec69d7e ("virtio:
harden vring IRQ"). It works with the assumption that the driver or
core can properly call virtio_device_ready() at the right
place. Unfortunately, this seems to be not true and uncover various
bugs of the existing drivers, mainly the issue of using
virtio_device_ready() incorrectly.
So let's add a Kconfig option and disable it by default. It gives
us time to fix the drivers and then we can consider re-enabling it.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220622012940.21441-1-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Here is the set of driver core changes for 5.19-rc1.
Note, I'm not really happy with this pull request as-is, see below for
details, but overall this is all good for everything but a small set of
systems, which we have a fix for already.
Lots of tiny driver core changes and cleanups happened this cycle,
but the two major things were:
- firmware_loader reorganization and additions including the
ability to have XZ compressed firmware images and the ability
for userspace to initiate the firmware load when it needs to,
instead of being always initiated by the kernel. FPGA devices
specifically want this ability to have their firmware changed
over the lifetime of the system boot, and this allows them to
work without having to come up with yet-another-custom-uapi
interface for loading firmware for them.
- physical location support added to sysfs so that devices that
know this information, can tell userspace where they are
located in a common way. Some ACPI devices already support
this today, and more bus types should support this in the
future.
Smaller changes included:
- driver_override api cleanups and fixes
- error path cleanups and fixes
- get_abi script fixes
- deferred probe timeout changes.
It's that last change that I'm the most worried about. It has been
reported to cause boot problems for a number of systems, and I have a
tested patch series that resolves this issue. But I didn't get it
merged into my tree before 5.18-final came out, so it has not gotten any
linux-next testing.
I'll send the fixup patches (there are 2) as a follow-on series to this
pull request if you want to take them directly, _OR_ I can just revert
the probe timeout changes and they can wait for the next -rc1 merge
cycle. Given that the fixes are tested, and pretty simple, I'm leaning
toward that choice. Sorry this all came at the end of the merge window,
I should have resolved this all 2 weeks ago, that's my fault as it was
in the middle of some travel for me.
All have been tested in linux-next for weeks, with no reported issues
other than the above-mentioned boot time outs.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYpnv/A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk/fACgvmenbo5HipqyHnOmTQlT50xQ9EYAn2eTq6ai
GkjLXBGNWOPBa5cU52qf
=yEi/
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core changes for 5.19-rc1.
Lots of tiny driver core changes and cleanups happened this cycle, but
the two major things are:
- firmware_loader reorganization and additions including the ability
to have XZ compressed firmware images and the ability for userspace
to initiate the firmware load when it needs to, instead of being
always initiated by the kernel. FPGA devices specifically want this
ability to have their firmware changed over the lifetime of the
system boot, and this allows them to work without having to come up
with yet-another-custom-uapi interface for loading firmware for
them.
- physical location support added to sysfs so that devices that know
this information, can tell userspace where they are located in a
common way. Some ACPI devices already support this today, and more
bus types should support this in the future.
Smaller changes include:
- driver_override api cleanups and fixes
- error path cleanups and fixes
- get_abi script fixes
- deferred probe timeout changes.
It's that last change that I'm the most worried about. It has been
reported to cause boot problems for a number of systems, and I have a
tested patch series that resolves this issue. But I didn't get it
merged into my tree before 5.18-final came out, so it has not gotten
any linux-next testing.
I'll send the fixup patches (there are 2) as a follow-on series to this
pull request.
All have been tested in linux-next for weeks, with no reported issues
other than the above-mentioned boot time-outs"
* tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
driver core: fix deadlock in __device_attach
kernfs: Separate kernfs_pr_cont_buf and rename_lock.
topology: Remove unused cpu_cluster_mask()
driver core: Extend deferred probe timeout on driver registration
MAINTAINERS: add Russ Weight as a firmware loader maintainer
driver: base: fix UAF when driver_attach failed
test_firmware: fix end of loop test in upload_read_show()
driver core: location: Add "back" as a possible output for panel
driver core: location: Free struct acpi_pld_info *pld
driver core: Add "*" wildcard support to driver_async_probe cmdline param
driver core: location: Check for allocations failure
arch_topology: Trace the update thermal pressure
kernfs: Rename kernfs_put_open_node to kernfs_unlink_open_file.
export: fix string handling of namespace in EXPORT_SYMBOL_NS
rpmsg: use local 'dev' variable
rpmsg: Fix calling device_lock() on non-initialized device
firmware_loader: describe 'module' parameter of firmware_upload_register()
firmware_loader: Move definitions from sysfs_upload.h to sysfs.h
firmware_loader: Fix configs for sysfs split
selftests: firmware: Add firmware upload selftests
...
mac vlan filter and stats support in mlx5 vdpa
irq hardening in virtio
performance improvements in virtio crypto
polling i/o support in virtio blk
ASID support in vhost
fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmKXBEwPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp9pgIAJKdLbtrqDdDrPJRg5Xs2wsWMbGnXbKxm71Q
kGPfnkn15yjwiMJcdNO8O16qP5VGUzBWPhGc3X7U9KRU4EI2yEGLFv9hwRvdlY9h
4C7O4fBWTbuqTT6pwwAH9vT3/b6q8bMh4D3uD2P1zSwh8POqHm1kyRivXPPr4PUA
5TAc04EGcrFQpC9co3v8UmJ7EjLa/tgdUb7igTv5VHi7K2GNGMycSvHP/v7CFgZ6
paVYThMCrWOJkIIk8k6qhMKhAxkQ7lBrqhLBtfX9jyadLmq5hAQQu2D43PoZb2ed
IbNN/g5Sv9yaL7ERYzTRAEfuXVGPiDLWli2C5sHdz2IJDBeqQeU=
=Vlh6
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"vhost,virtio and vdpa features, fixes, and cleanups:
- mac vlan filter and stats support in mlx5 vdpa
- irq hardening in virtio
- performance improvements in virtio crypto
- polling i/o support in virtio blk
- ASID support in vhost
- fixes, cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (64 commits)
vdpa: ifcvf: set pci driver data in probe
vdpa/mlx5: Add RX MAC VLAN filter support
vdpa/mlx5: Remove flow counter from steering
vhost: rename vhost_work_dev_flush
vhost-test: drop flush after vhost_dev_cleanup
vhost-scsi: drop flush after vhost_dev_cleanup
vhost_vsock: simplify vhost_vsock_flush()
vhost_test: remove vhost_test_flush_vq()
vhost_net: get rid of vhost_net_flush_vq() and extra flush calls
vhost: flush dev once during vhost_dev_stop
vhost: get rid of vhost_poll_flush() wrapper
vhost-vdpa: return -EFAULT on copy_to_user() failure
vdpasim: Off by one in vdpasim_set_group_asid()
virtio: Directly use ida_alloc()/free()
virtio: use WARN_ON() to warning illegal status value
virtio: harden vring IRQ
virtio: allow to unbreak virtqueue
virtio-ccw: implement synchronize_cbs()
virtio-mmio: implement synchronize_cbs()
virtio-pci: implement synchronize_cbs()
...
- Improvements to mlx5 vfio-pci variant driver, including support
for parallel migration per PF (Yishai Hadas)
- Remove redundant iommu_present() check (Robin Murphy)
- Ongoing refactoring to consolidate the VFIO driver facing API
to use vfio_device (Jason Gunthorpe)
- Use drvdata to store vfio_device among all vfio-pci and variant
drivers (Jason Gunthorpe)
- Remove redundant code now that IOMMU core manages group DMA
ownership (Jason Gunthorpe)
- Remove vfio_group from external API handling struct file ownership
(Jason Gunthorpe)
- Correct typo in uapi comments (Thomas Huth)
- Fix coccicheck detected deadlock (Wan Jiabing)
- Use rwsem to remove races and simplify code around container and
kvm association to groups (Jason Gunthorpe)
- Harden access to devices in low power states and use runtime PM to
enable d3cold support for unused devices (Abhishek Sahu)
- Fix dma_owner handling of fake IOMMU groups (Jason Gunthorpe)
- Set driver_managed_dma on vfio-pci variant drivers (Jason Gunthorpe)
- Pass KVM pointer directly rather than via notifier (Matthew Rosato)
-----BEGIN PGP SIGNATURE-----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=etEI
-----END PGP SIGNATURE-----
Merge tag 'vfio-v5.19-rc1' of https://github.com/awilliam/linux-vfio
Pull vfio updates from Alex Williamson:
- Improvements to mlx5 vfio-pci variant driver, including support for
parallel migration per PF (Yishai Hadas)
- Remove redundant iommu_present() check (Robin Murphy)
- Ongoing refactoring to consolidate the VFIO driver facing API to use
vfio_device (Jason Gunthorpe)
- Use drvdata to store vfio_device among all vfio-pci and variant
drivers (Jason Gunthorpe)
- Remove redundant code now that IOMMU core manages group DMA ownership
(Jason Gunthorpe)
- Remove vfio_group from external API handling struct file ownership
(Jason Gunthorpe)
- Correct typo in uapi comments (Thomas Huth)
- Fix coccicheck detected deadlock (Wan Jiabing)
- Use rwsem to remove races and simplify code around container and kvm
association to groups (Jason Gunthorpe)
- Harden access to devices in low power states and use runtime PM to
enable d3cold support for unused devices (Abhishek Sahu)
- Fix dma_owner handling of fake IOMMU groups (Jason Gunthorpe)
- Set driver_managed_dma on vfio-pci variant drivers (Jason Gunthorpe)
- Pass KVM pointer directly rather than via notifier (Matthew Rosato)
* tag 'vfio-v5.19-rc1' of https://github.com/awilliam/linux-vfio: (38 commits)
vfio: remove VFIO_GROUP_NOTIFY_SET_KVM
vfio/pci: Add driver_managed_dma to the new vfio_pci drivers
vfio: Do not manipulate iommu dma_owner for fake iommu groups
vfio/pci: Move the unused device into low power state with runtime PM
vfio/pci: Virtualize PME related registers bits and initialize to zero
vfio/pci: Change the PF power state to D0 before enabling VFs
vfio/pci: Invalidate mmaps and block the access in D3hot power state
vfio: Change struct vfio_group::container_users to a non-atomic int
vfio: Simplify the life cycle of the group FD
vfio: Fully lock struct vfio_group::container
vfio: Split up vfio_group_get_device_fd()
vfio: Change struct vfio_group::opened from an atomic to bool
vfio: Add missing locking for struct vfio_group::kvm
kvm/vfio: Fix potential deadlock problem in vfio
include/uapi/linux/vfio.h: Fix trivial typo - _IORW should be _IOWR instead
vfio/pci: Use the struct file as the handle not the vfio_group
kvm/vfio: Remove vfio_group from kvm
vfio: Change vfio_group_set_kvm() to vfio_file_set_kvm()
vfio: Change vfio_external_check_extension() to vfio_file_enforced_coherent()
vfio: Remove vfio_external_group_match_file()
...
This is a rework on the previous IRQ hardening that is done for
virtio-pci where several drawbacks were found and were reverted:
1) try to use IRQF_NO_AUTOEN which is not friendly to affinity managed IRQ
that is used by some device such as virtio-blk
2) done only for PCI transport
The vq->broken is re-used in this patch for implementing the IRQ
hardening. The vq->broken is set to true during both initialization
and reset. And the vq->broken is set to false in
virtio_device_ready(). Then vring_interrupt() can check and return
when vq->broken is true. And in this case, switch to return IRQ_NONE
to let the interrupt core aware of such invalid interrupt to prevent
IRQ storm.
The reason of using a per queue variable instead of a per device one
is that we may need it for per queue reset hardening in the future.
Note that the hardening is only done for vring interrupt since the
config interrupt hardening is already done in commit 22b7050a02
("virtio: defer config changed notifications"). But the method that is
used by config interrupt can't be reused by the vring interrupt
handler because it uses spinlock to do the synchronization which is
expensive.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Vineeth Vijayan <vneethv@linux.ibm.com>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: linux-s390@vger.kernel.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220527060120.20964-9-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
This patch tries to implement the synchronize_cbs() for ccw. For the
vring_interrupt() that is called via virtio_airq_handler(), the
synchronization is simply done via the airq_info's lock. For the
vring_interrupt() that is called via virtio_ccw_int_handler(), a per
device rwlock is introduced and used in the synchronization method.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Vineeth Vijayan <vneethv@linux.ibm.com>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: linux-s390@vger.kernel.org
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220527060120.20964-7-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- Add support for clearing memory error via pwrite(2) on DAX
- Fix 'security overwrite' support in the presence of media errors
- Miscellaneous cleanups and fixes for nfit_test (nvdimm unit tests)
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCYpFPcQAKCRDfioYZHlFs
Z9A3AQCdfoT5sY3OK+I/3oTvJ//6lw2MtXrnXFM046ICKPi9sgD8CzR9mRAHA+vj
kxOtJEU2bA9naninXGORsDUndiNkwQo=
=gVIn
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm and DAX updates from Dan Williams:
"New support for clearing memory errors when a file is in DAX mode,
alongside with some other fixes and cleanups.
Previously it was only possible to clear these errors using a truncate
or hole-punch operation to trigger the filesystem to reallocate the
block, now, any page aligned write can opportunistically clear errors
as well.
This change spans x86/mm, nvdimm, and fs/dax, and has received the
appropriate sign-offs. Thanks to Jane for her work on this.
Summary:
- Add support for clearing memory error via pwrite(2) on DAX
- Fix 'security overwrite' support in the presence of media errors
- Miscellaneous cleanups and fixes for nfit_test (nvdimm unit tests)"
* tag 'libnvdimm-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
pmem: implement pmem_recovery_write()
pmem: refactor pmem_clear_poison()
dax: add .recovery_write dax_operation
dax: introduce DAX_RECOVERY_WRITE dax access mode
mce: fix set_mce_nospec to always unmap the whole page
x86/mce: relocate set{clear}_mce_nospec() functions
acpi/nfit: rely on mce->misc to determine poison granularity
testing: nvdimm: asm/mce.h is not needed in nfit.c
testing: nvdimm: iomap: make __nfit_test_ioremap a macro
nvdimm: Allow overwrite in the presence of disabled dimms
tools/testing/nvdimm: remove unneeded flush_workqueue
* ultravisor communication device driver
* fix TEID on terminating storage key ops
RISC-V:
* Added Sv57x4 support for G-stage page table
* Added range based local HFENCE functions
* Added remote HFENCE functions based on VCPU requests
* Added ISA extension registers in ONE_REG interface
* Updated KVM RISC-V maintainers entry to cover selftests support
ARM:
* Add support for the ARMv8.6 WFxT extension
* Guard pages for the EL2 stacks
* Trap and emulate AArch32 ID registers to hide unsupported features
* Ability to select and save/restore the set of hypercalls exposed
to the guest
* Support for PSCI-initiated suspend in collaboration with userspace
* GICv3 register-based LPI invalidation support
* Move host PMU event merging into the vcpu data structure
* GICv3 ITS save/restore fixes
* The usual set of small-scale cleanups and fixes
x86:
* New ioctls to get/set TSC frequency for a whole VM
* Allow userspace to opt out of hypercall patching
* Only do MSR filtering for MSRs accessed by rdmsr/wrmsr
AMD SEV improvements:
* Add KVM_EXIT_SHUTDOWN metadata for SEV-ES
* V_TSC_AUX support
Nested virtualization improvements for AMD:
* Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
nested vGIF)
* Allow AVIC to co-exist with a nested guest running
* Fixes for LBR virtualizations when a nested guest is running,
and nested LBR virtualization support
* PAUSE filtering for nested hypervisors
Guest support:
* Decoupling of vcpu_is_preempted from PV spinlocks
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmKN9M4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNLeAf+KizAlQwxEehHHeNyTkZuKyMawrD6
zsqAENR6i1TxiXe7fDfPFbO2NR0ZulQopHbD9mwnHJ+nNw0J4UT7g3ii1IAVcXPu
rQNRGMVWiu54jt+lep8/gDg0JvPGKVVKLhxUaU1kdWT9PhIOC6lwpP3vmeWkUfRi
PFL/TMT0M8Nfryi0zHB0tXeqg41BiXfqO8wMySfBAHUbpv8D53D2eXQL6YlMM0pL
2quB1HxHnpueE5vj3WEPQ3PCdy1M2MTfCDBJAbZGG78Ljx45FxSGoQcmiBpPnhJr
C6UGP4ZDWpml5YULUoA70k5ylCbP+vI61U4vUtzEiOjHugpPV5wFKtx5nw==
=ozWx
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"S390:
- ultravisor communication device driver
- fix TEID on terminating storage key ops
RISC-V:
- Added Sv57x4 support for G-stage page table
- Added range based local HFENCE functions
- Added remote HFENCE functions based on VCPU requests
- Added ISA extension registers in ONE_REG interface
- Updated KVM RISC-V maintainers entry to cover selftests support
ARM:
- Add support for the ARMv8.6 WFxT extension
- Guard pages for the EL2 stacks
- Trap and emulate AArch32 ID registers to hide unsupported features
- Ability to select and save/restore the set of hypercalls exposed to
the guest
- Support for PSCI-initiated suspend in collaboration with userspace
- GICv3 register-based LPI invalidation support
- Move host PMU event merging into the vcpu data structure
- GICv3 ITS save/restore fixes
- The usual set of small-scale cleanups and fixes
x86:
- New ioctls to get/set TSC frequency for a whole VM
- Allow userspace to opt out of hypercall patching
- Only do MSR filtering for MSRs accessed by rdmsr/wrmsr
AMD SEV improvements:
- Add KVM_EXIT_SHUTDOWN metadata for SEV-ES
- V_TSC_AUX support
Nested virtualization improvements for AMD:
- Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
nested vGIF)
- Allow AVIC to co-exist with a nested guest running
- Fixes for LBR virtualizations when a nested guest is running, and
nested LBR virtualization support
- PAUSE filtering for nested hypervisors
Guest support:
- Decoupling of vcpu_is_preempted from PV spinlocks"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (199 commits)
KVM: x86: Fix the intel_pt PMI handling wrongly considered from guest
KVM: selftests: x86: Sync the new name of the test case to .gitignore
Documentation: kvm: reorder ARM-specific section about KVM_SYSTEM_EVENT_SUSPEND
x86, kvm: use correct GFP flags for preemption disabled
KVM: LAPIC: Drop pending LAPIC timer injection when canceling the timer
x86/kvm: Alloc dummy async #PF token outside of raw spinlock
KVM: x86: avoid calling x86 emulator without a decoded instruction
KVM: SVM: Use kzalloc for sev ioctl interfaces to prevent kernel data leak
x86/fpu: KVM: Set the base guest FPU uABI size to sizeof(struct kvm_xsave)
s390/uv_uapi: depend on CONFIG_S390
KVM: selftests: x86: Fix test failure on arch lbr capable platforms
KVM: LAPIC: Trace LAPIC timer expiration on every vmentry
KVM: s390: selftest: Test suppression indication on key prot exception
KVM: s390: Don't indicate suppression on dirtying, failing memop
selftests: drivers/s390x: Add uvdevice tests
drivers/s390/char: Add Ultravisor io device
MAINTAINERS: Update KVM RISC-V entry to cover selftests support
RISC-V: KVM: Introduce ISA extension register
RISC-V: KVM: Cleanup stale TLB entries when host CPU changes
RISC-V: KVM: Add remote HFENCE functions based on VCPU requests
...
Core
----
- Support TCPv6 segmentation offload with super-segments larger than
64k bytes using the IPv6 Jumbogram extension header (AKA BIG TCP).
- Generalize skb freeing deferral to per-cpu lists, instead of
per-socket lists.
- Add a netdev statistic for packets dropped due to L2 address
mismatch (rx_otherhost_dropped).
- Continue work annotating skb drop reasons.
- Accept alternative netdev names (ALT_IFNAME) in more netlink
requests.
- Add VLAN support for AF_PACKET SOCK_RAW GSO.
- Allow receiving skb mark from the socket as a cmsg.
- Enable memcg accounting for veth queues, sysctl tables and IPv6.
BPF
---
- Add libbpf support for User Statically-Defined Tracing (USDTs).
- Speed up symbol resolution for kprobes multi-link attachments.
- Support storing typed pointers to referenced and unreferenced
objects in BPF maps.
- Add support for BPF link iterator.
- Introduce access to remote CPU map elements in BPF per-cpu map.
- Allow middle-of-the-road settings for the
kernel.unprivileged_bpf_disabled sysctl.
- Implement basic types of dynamic pointers e.g. to allow for
dynamically sized ringbuf reservations without extra memory copies.
Protocols
---------
- Retire port only listening_hash table, add a second bind table
hashed by port and address. Avoid linear list walk when binding
to very popular ports (e.g. 443).
- Add bridge FDB bulk flush filtering support allowing user space
to remove all FDB entries matching a condition.
- Introduce accept_unsolicited_na sysctl for IPv6 to implement
router-side changes for RFC9131.
- Support for MPTCP path manager in user space.
- Add MPTCP support for fallback to regular TCP for connections
that have never connected additional subflows or transmitted
out-of-sequence data (partial support for RFC8684 fallback).
- Avoid races in MPTCP-level window tracking, stabilize and improve
throughput.
- Support lockless operation of GRE tunnels with seq numbers enabled.
- WiFi support for host based BSS color collision detection.
- Add support for SO_TXTIME/SCM_TXTIME on CAN sockets.
- Support transmission w/o flow control in CAN ISOTP (ISO 15765-2).
- Support zero-copy Tx with TLS 1.2 crypto offload (sendfile).
- Allow matching on the number of VLAN tags via tc-flower.
- Add tracepoint for tcp_set_ca_state().
Driver API
----------
- Improve error reporting from classifier and action offload.
- Add support for listing line cards in switches (devlink).
- Add helpers for reporting page pool statistics with ethtool -S.
- Add support for reading clock cycles when using PTP virtual clocks,
instead of having the driver convert to time before reporting.
This makes it possible to report time from different vclocks.
- Support configuring low-latency Tx descriptor push via ethtool.
- Separate Clause 22 and Clause 45 MDIO accesses more explicitly.
New hardware / drivers
----------------------
- Ethernet:
- Marvell's Octeon NIC PCI Endpoint support (octeon_ep)
- Sunplus SP7021 SoC (sp7021_emac)
- Add support for Renesas RZ/V2M (in ravb)
- Add support for MediaTek mt7986 switches (in mtk_eth_soc)
- Ethernet PHYs:
- ADIN1100 industrial PHYs (w/ 10BASE-T1L and SQI reporting)
- TI DP83TD510 PHY
- Microchip LAN8742/LAN88xx PHYs
- WiFi:
- Driver for pureLiFi X, XL, XC devices (plfxlc)
- Driver for Silicon Labs devices (wfx)
- Support for WCN6750 (in ath11k)
- Support Realtek 8852ce devices (in rtw89)
- Mobile:
- MediaTek T700 modems (Intel 5G 5000 M.2 cards)
- CAN:
- ctucanfd: add support for CTU CAN FD open-source IP core
from Czech Technical University in Prague
Drivers
-------
- Delete a number of old drivers still using virt_to_bus().
- Ethernet NICs:
- intel: support TSO on tunnels MPLS
- broadcom: support multi-buffer XDP
- nfp: support VF rate limiting
- sfc: use hardware tx timestamps for more than PTP
- mlx5: multi-port eswitch support
- hyper-v: add support for XDP_REDIRECT
- atlantic: XDP support (including multi-buffer)
- macb: improve real-time perf by deferring Tx processing to NAPI
- High-speed Ethernet switches:
- mlxsw: implement basic line card information querying
- prestera: add support for traffic policing on ingress and egress
- Embedded Ethernet switches:
- lan966x: add support for packet DMA (FDMA)
- lan966x: add support for PTP programmable pins
- ti: cpsw_new: enable bc/mc storm prevention
- Qualcomm 802.11ax WiFi (ath11k):
- Wake-on-WLAN support for QCA6390 and WCN6855
- device recovery (firmware restart) support
- support setting Specific Absorption Rate (SAR) for WCN6855
- read country code from SMBIOS for WCN6855/QCA6390
- enable keep-alive during WoWLAN suspend
- implement remain-on-channel support
- MediaTek WiFi (mt76):
- support Wireless Ethernet Dispatch offloading packet movement
between the Ethernet switch and WiFi interfaces
- non-standard VHT MCS10-11 support
- mt7921 AP mode support
- mt7921 IPv6 NS offload support
- Ethernet PHYs:
- micrel: ksz9031/ksz9131: cabletest support
- lan87xx: SQI support for T1 PHYs
- lan937x: add interrupt support for link detection
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Wjii
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core
----
- Support TCPv6 segmentation offload with super-segments larger than
64k bytes using the IPv6 Jumbogram extension header (AKA BIG TCP).
- Generalize skb freeing deferral to per-cpu lists, instead of
per-socket lists.
- Add a netdev statistic for packets dropped due to L2 address
mismatch (rx_otherhost_dropped).
- Continue work annotating skb drop reasons.
- Accept alternative netdev names (ALT_IFNAME) in more netlink
requests.
- Add VLAN support for AF_PACKET SOCK_RAW GSO.
- Allow receiving skb mark from the socket as a cmsg.
- Enable memcg accounting for veth queues, sysctl tables and IPv6.
BPF
---
- Add libbpf support for User Statically-Defined Tracing (USDTs).
- Speed up symbol resolution for kprobes multi-link attachments.
- Support storing typed pointers to referenced and unreferenced
objects in BPF maps.
- Add support for BPF link iterator.
- Introduce access to remote CPU map elements in BPF per-cpu map.
- Allow middle-of-the-road settings for the
kernel.unprivileged_bpf_disabled sysctl.
- Implement basic types of dynamic pointers e.g. to allow for
dynamically sized ringbuf reservations without extra memory copies.
Protocols
---------
- Retire port only listening_hash table, add a second bind table
hashed by port and address. Avoid linear list walk when binding to
very popular ports (e.g. 443).
- Add bridge FDB bulk flush filtering support allowing user space to
remove all FDB entries matching a condition.
- Introduce accept_unsolicited_na sysctl for IPv6 to implement
router-side changes for RFC9131.
- Support for MPTCP path manager in user space.
- Add MPTCP support for fallback to regular TCP for connections that
have never connected additional subflows or transmitted
out-of-sequence data (partial support for RFC8684 fallback).
- Avoid races in MPTCP-level window tracking, stabilize and improve
throughput.
- Support lockless operation of GRE tunnels with seq numbers enabled.
- WiFi support for host based BSS color collision detection.
- Add support for SO_TXTIME/SCM_TXTIME on CAN sockets.
- Support transmission w/o flow control in CAN ISOTP (ISO 15765-2).
- Support zero-copy Tx with TLS 1.2 crypto offload (sendfile).
- Allow matching on the number of VLAN tags via tc-flower.
- Add tracepoint for tcp_set_ca_state().
Driver API
----------
- Improve error reporting from classifier and action offload.
- Add support for listing line cards in switches (devlink).
- Add helpers for reporting page pool statistics with ethtool -S.
- Add support for reading clock cycles when using PTP virtual clocks,
instead of having the driver convert to time before reporting. This
makes it possible to report time from different vclocks.
- Support configuring low-latency Tx descriptor push via ethtool.
- Separate Clause 22 and Clause 45 MDIO accesses more explicitly.
New hardware / drivers
----------------------
- Ethernet:
- Marvell's Octeon NIC PCI Endpoint support (octeon_ep)
- Sunplus SP7021 SoC (sp7021_emac)
- Add support for Renesas RZ/V2M (in ravb)
- Add support for MediaTek mt7986 switches (in mtk_eth_soc)
- Ethernet PHYs:
- ADIN1100 industrial PHYs (w/ 10BASE-T1L and SQI reporting)
- TI DP83TD510 PHY
- Microchip LAN8742/LAN88xx PHYs
- WiFi:
- Driver for pureLiFi X, XL, XC devices (plfxlc)
- Driver for Silicon Labs devices (wfx)
- Support for WCN6750 (in ath11k)
- Support Realtek 8852ce devices (in rtw89)
- Mobile:
- MediaTek T700 modems (Intel 5G 5000 M.2 cards)
- CAN:
- ctucanfd: add support for CTU CAN FD open-source IP core from
Czech Technical University in Prague
Drivers
-------
- Delete a number of old drivers still using virt_to_bus().
- Ethernet NICs:
- intel: support TSO on tunnels MPLS
- broadcom: support multi-buffer XDP
- nfp: support VF rate limiting
- sfc: use hardware tx timestamps for more than PTP
- mlx5: multi-port eswitch support
- hyper-v: add support for XDP_REDIRECT
- atlantic: XDP support (including multi-buffer)
- macb: improve real-time perf by deferring Tx processing to NAPI
- High-speed Ethernet switches:
- mlxsw: implement basic line card information querying
- prestera: add support for traffic policing on ingress and egress
- Embedded Ethernet switches:
- lan966x: add support for packet DMA (FDMA)
- lan966x: add support for PTP programmable pins
- ti: cpsw_new: enable bc/mc storm prevention
- Qualcomm 802.11ax WiFi (ath11k):
- Wake-on-WLAN support for QCA6390 and WCN6855
- device recovery (firmware restart) support
- support setting Specific Absorption Rate (SAR) for WCN6855
- read country code from SMBIOS for WCN6855/QCA6390
- enable keep-alive during WoWLAN suspend
- implement remain-on-channel support
- MediaTek WiFi (mt76):
- support Wireless Ethernet Dispatch offloading packet movement
between the Ethernet switch and WiFi interfaces
- non-standard VHT MCS10-11 support
- mt7921 AP mode support
- mt7921 IPv6 NS offload support
- Ethernet PHYs:
- micrel: ksz9031/ksz9131: cabletest support
- lan87xx: SQI support for T1 PHYs
- lan937x: add interrupt support for link detection"
* tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1809 commits)
ptp: ocp: Add firmware header checks
ptp: ocp: fix PPS source selector debugfs reporting
ptp: ocp: add .init function for sma_op vector
ptp: ocp: vectorize the sma accessor functions
ptp: ocp: constify selectors
ptp: ocp: parameterize input/output sma selectors
ptp: ocp: revise firmware display
ptp: ocp: add Celestica timecard PCI ids
ptp: ocp: Remove #ifdefs around PCI IDs
ptp: ocp: 32-bit fixups for pci start address
Revert "net/smc: fix listen processing for SMC-Rv2"
ath6kl: Use cc-disable-warning to disable -Wdangling-pointer
selftests/bpf: Dynptr tests
bpf: Add dynptr data slices
bpf: Add bpf_dynptr_read and bpf_dynptr_write
bpf: Dynptr support for ring buffers
bpf: Add bpf_dynptr_from_mem for local dynptrs
bpf: Add verifier support for dynptrs
bpf: Suppress 'passing zero to PTR_ERR' warning
bpf: Introduce bpf_arch_text_invalidate for bpf_prog_pack
...
Rather than relying on a notifier for associating the KVM with
the group, let's assume that the association has already been
made prior to device_open. The first time a device is opened
associate the group KVM with the device.
This fixes a user-triggerable oops in GVT.
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Zhi Wang <zhi.a.wang@intel.com>
Link: https://lore.kernel.org/r/20220519183311.582380-2-mjrosato@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
- Make use of the IBM z16 processor activity instrumentation facility
to count cryptography operations: add a new PMU device driver so
that perf can make use of this.
- Add new IBM z16 extended counter set to cpumf support.
- Add vdso randomization support.
- Add missing KCSAN instrumentation to barriers and spinlocks, which
should make s390's KCSAN support complete.
- Add support for IPL-complete-control facility: notify the hypervisor
that kexec finished work and the kernel starts.
- Improve error logging for PCI.
- Various small changes to workaround llvm's integrated assembler
limitations, and one bug, to make it finally possible to compile the
kernel with llvm's integrated assembler. This also requires to raise
the minimum clang version to 14.0.0.
- Various other small enhancements, bug fixes, and cleanups all over
the place.
-----BEGIN PGP SIGNATURE-----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=W+1k
-----END PGP SIGNATURE-----
Merge tag 's390-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Make use of the IBM z16 processor activity instrumentation facility
to count cryptography operations: add a new PMU device driver so that
perf can make use of this.
- Add new IBM z16 extended counter set to cpumf support.
- Add vdso randomization support.
- Add missing KCSAN instrumentation to barriers and spinlocks, which
should make s390's KCSAN support complete.
- Add support for IPL-complete-control facility: notify the hypervisor
that kexec finished work and the kernel starts.
- Improve error logging for PCI.
- Various small changes to workaround llvm's integrated assembler
limitations, and one bug, to make it finally possible to compile the
kernel with llvm's integrated assembler. This also requires to raise
the minimum clang version to 14.0.0.
- Various other small enhancements, bug fixes, and cleanups all over
the place.
* tag 's390-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (48 commits)
s390/head: get rid of 31 bit leftovers
scripts/min-tool-version.sh: raise minimum clang version to 14.0.0 for s390
s390/boot: do not emit debug info for assembly with llvm's IAS
s390/boot: workaround llvm IAS bug
s390/purgatory: workaround llvm's IAS limitations
s390/entry: workaround llvm's IAS limitations
s390/alternatives: remove padding generation code
s390/alternatives: provide identical sized orginal/alternative sequences
s390/cpumf: add new extended counter set for IBM z16
s390/preempt: disable __preempt_count_add() optimization for PROFILE_ALL_BRANCHES
s390/stp: clock_delta should be signed
s390/stp: fix todoff size
s390/pai: add support for cryptography counters
entry: Rename arch_check_user_regs() to arch_enter_from_user_mode()
s390/compat: cleanup compat_linux.h header file
s390/entry: remove broken and not needed code
s390/boot: convert parmarea to C
s390/boot: convert initial lowcore to C
s390/ptrace: move short psw definitions to ptrace header file
s390/head: initialize all new psws
...
-----BEGIN PGP SIGNATURE-----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=geQL
-----END PGP SIGNATURE-----
Merge tag 'for-5.19/drivers-2022-05-22' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
"Here are the driver updates queued up for 5.19. This contains:
- NVMe pull requests via Christoph:
- tighten the PCI presence check (Stefan Roese)
- fix a potential NULL pointer dereference in an error path (Kyle
Miller Smith)
- fix interpretation of the DMRSL field (Tom Yan)
- relax the data transfer alignment (Keith Busch)
- verbose error logging improvements (Max Gurtovoy, Chaitanya
Kulkarni)
- misc cleanups (Chaitanya Kulkarni, Christoph)
- set non-mdts limits in nvme_scan_work (Chaitanya Kulkarni)
- add support for TP4084 - Time-to-Ready Enhancements (Christoph)
- MD pull request via Song:
- Improve annotation in raid5 code, by Logan Gunthorpe
- Support MD_BROKEN flag in raid-1/5/10, by Mariusz Tkaczyk
- Other small fixes/cleanups
- null_blk series making the configfs side much saner (Damien)
- Various minor drbd cleanups and fixes (Haowen, Uladzislau, Jiapeng,
Arnd, Cai)
- Avoid using the system workqueue (and hence flushing it) in rnbd
(Jack)
- Avoid using the system workqueue (and hence flushing it) in aoe
(Tetsuo)
- Series fixing discard_alignment issues in drivers (Christoph)
- Small series fixing drivers poking at disk->part0 for openers
information (Christoph)
- Series fixing deadlocks in loop (Christoph, Tetsuo)
- Remove loop.h and add SPDX headers (Christoph)
- Various fixes and cleanups (Julia, Xie, Yu)"
* tag 'for-5.19/drivers-2022-05-22' of git://git.kernel.dk/linux-block: (72 commits)
mtip32xx: fix typo in comment
nvme: set non-mdts limits in nvme_scan_work
nvme: add support for TP4084 - Time-to-Ready Enhancements
nvme: split the enum used for various register constants
nbd: Fix hung on disconnect request if socket is closed before
nvme-fabrics: add a request timeout helper
nvme-pci: harden drive presence detect in nvme_dev_disable()
nvme-pci: fix a NULL pointer dereference in nvme_alloc_admin_tags
nvme: mark internal passthru request RQF_QUIET
nvme: remove unneeded include from constants file
nvme: add missing status values to verbose logging
nvme: set dma alignment to dword
nvme: fix interpretation of DMRSL
loop: remove most the top-of-file boilerplate comment from the UAPI header
loop: remove most the top-of-file boilerplate comment
loop: add a SPDX header
loop: remove loop.h
block: null_blk: Improve device creation with configfs
block: null_blk: Cleanup messages
block: null_blk: Cleanup device creation and deletion
...
-----BEGIN PGP SIGNATURE-----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=0Rw1
-----END PGP SIGNATURE-----
Merge tag 'for-5.19/block-2022-05-22' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
"Here are the core block changes for 5.19. This contains:
- blk-throttle accounting fix (Laibin)
- Series removing redundant assignments (Michal)
- Expose bio cache via the bio_set, so that DM can use it (Mike)
- Finish off the bio allocation interface cleanups by dealing with
the weirdest member of the family. bio_kmalloc combines a kmalloc
for the bio and bio_vecs with a hidden bio_init call and magic
cleanup semantics (Christoph)
- Clean up the block layer API so that APIs consumed by file systems
are (almost) only struct block_device based, so that file systems
don't have to poke into block layer internals like the
request_queue (Christoph)
- Clean up the blk_execute_rq* API (Christoph)
- Clean up various lose end in the blk-cgroup code to make it easier
to follow in preparation of reworking the blkcg assignment for bios
(Christoph)
- Fix use-after-free issues in BFQ when processes with merged queues
get moved to different cgroups (Jan)
- BFQ fixes (Jan)
- Various fixes and cleanups (Bart, Chengming, Fanjun, Julia, Ming,
Wolfgang, me)"
* tag 'for-5.19/block-2022-05-22' of git://git.kernel.dk/linux-block: (83 commits)
blk-mq: fix typo in comment
bfq: Remove bfq_requeue_request_body()
bfq: Remove superfluous conversion from RQ_BIC()
bfq: Allow current waker to defend against a tentative one
bfq: Relax waker detection for shared queues
blk-cgroup: delete rcu_read_lock_held() WARN_ON_ONCE()
blk-throttle: Set BIO_THROTTLED when bio has been throttled
blk-cgroup: Remove unnecessary rcu_read_lock/unlock()
blk-cgroup: always terminate io.stat lines
block, bfq: make bfq_has_work() more accurate
block, bfq: protect 'bfqd->queued' by 'bfqd->lock'
block: cleanup the VM accounting in submit_bio
block: Fix the bio.bi_opf comment
block: reorder the REQ_ flags
blk-iocost: combine local_stat and desc_stat to stat
block: improve the error message from bio_check_eod
block: allow passing a NULL bdev to bio_alloc_clone/bio_init_clone
block: remove superfluous calls to blkcg_bio_issue_init
kthread: unexport kthread_blkcg
blk-cgroup: cleanup blkcg_maybe_throttle_current
...
This patch adds a new miscdevice to expose some Ultravisor functions
to userspace. Userspace can send IOCTLs to the uvdevice that will then
emit a corresponding Ultravisor Call and hands the result over to
userspace. The uvdevice is available if the Ultravisor Call facility is
present.
Userspace can call the Retrieve Attestation Measurement
Ultravisor Call using IOCTLs on the uvdevice.
The uvdevice will do some sanity checks first.
Then, copy the request data to kernel space, build the UVCB,
perform the UV call, and copy the result back to userspace.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/kvm/20220516113335.338212-1-seiden@linux.ibm.com/
Message-Id: <20220516113335.338212-1-seiden@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com> (whitespace and tristate fixes, pick)
Up till now, dax_direct_access() is used implicitly for normal
access, but for the purpose of recovery write, dax range with
poison is requested. To make the interface clear, introduce
enum dax_access_mode {
DAX_ACCESS,
DAX_RECOVERY_WRITE,
}
where DAX_ACCESS is used for normal dax access, and
DAX_RECOVERY_WRITE is used for dax recovery write.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Link: https://lore.kernel.org/r/165247982851.52965.11024212198889762949.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
and bluetooth. No outstanding fires.
Current release - regressions:
- eth: atlantic: always deep reset on pm op, fix null-deref
Current release - new code bugs:
- rds: use maybe_get_net() when acquiring refcount on TCP sockets
[refinement of a previous fix]
- eth: ocelot: mark traps with a bool instead of guessing type based
on list membership
Previous releases - regressions:
- net: fix skipping features in for_each_netdev_feature()
- phy: micrel: fix null-derefs on suspend/resume and probe
- bcmgenet: check for Wake-on-LAN interrupt probe deferral
Previous releases - always broken:
- ipv4: drop dst in multicast routing path, prevent leaks
- ping: fix address binding wrt vrf
- net: fix wrong network header length when BPF protocol translation
is used on skbs with a fraglist
- bluetooth: fix the creation of hdev->name
- rfkill: uapi: fix RFKILL_IOCTL_MAX_SIZE ioctl request definition
- wifi: iwlwifi: iwl-dbg: use del_timer_sync() before freeing
- wifi: ath11k: reduce the wait time of 11d scan and hw scan while
adding an interface
- mac80211: fix rx reordering with non explicit / psmp ack policy
- mac80211: reset MBSSID parameters upon connection
- nl80211: fix races in nl80211_set_tx_bitrate_mask()
- tls: fix context leak on tls_device_down
- sched: act_pedit: really ensure the skb is writable
- batman-adv: don't skb_split skbuffs with frag_list
- eth: ocelot: fix various issues with TC actions (null-deref; bad
stats; ineffective drops; ineffective filter removal)
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=jt7U
-----END PGP SIGNATURE-----
Merge tag 'net-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless, and bluetooth.
No outstanding fires.
Current release - regressions:
- eth: atlantic: always deep reset on pm op, fix null-deref
Current release - new code bugs:
- rds: use maybe_get_net() when acquiring refcount on TCP sockets
[refinement of a previous fix]
- eth: ocelot: mark traps with a bool instead of guessing type based
on list membership
Previous releases - regressions:
- net: fix skipping features in for_each_netdev_feature()
- phy: micrel: fix null-derefs on suspend/resume and probe
- bcmgenet: check for Wake-on-LAN interrupt probe deferral
Previous releases - always broken:
- ipv4: drop dst in multicast routing path, prevent leaks
- ping: fix address binding wrt vrf
- net: fix wrong network header length when BPF protocol translation
is used on skbs with a fraglist
- bluetooth: fix the creation of hdev->name
- rfkill: uapi: fix RFKILL_IOCTL_MAX_SIZE ioctl request definition
- wifi: iwlwifi: iwl-dbg: use del_timer_sync() before freeing
- wifi: ath11k: reduce the wait time of 11d scan and hw scan while
adding an interface
- mac80211: fix rx reordering with non explicit / psmp ack policy
- mac80211: reset MBSSID parameters upon connection
- nl80211: fix races in nl80211_set_tx_bitrate_mask()
- tls: fix context leak on tls_device_down
- sched: act_pedit: really ensure the skb is writable
- batman-adv: don't skb_split skbuffs with frag_list
- eth: ocelot: fix various issues with TC actions (null-deref; bad
stats; ineffective drops; ineffective filter removal)"
* tag 'net-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits)
tls: Fix context leak on tls_device_down
net: sfc: ef10: fix memory leak in efx_ef10_mtd_probe()
net/smc: non blocking recvmsg() return -EAGAIN when no data and signal_pending
net: dsa: bcm_sf2: Fix Wake-on-LAN with mac_link_down()
mlxsw: Avoid warning during ip6gre device removal
net: bcmgenet: Check for Wake-on-LAN interrupt probe deferral
net: ethernet: mediatek: ppe: fix wrong size passed to memset()
Bluetooth: Fix the creation of hdev->name
i40e: i40e_main: fix a missing check on list iterator
net/sched: act_pedit: really ensure the skb is writable
s390/lcs: fix variable dereferenced before check
s390/ctcm: fix potential memory leak
s390/ctcm: fix variable dereferenced before check
net: atlantic: verify hw_head_ lies within TX buffer ring
net: atlantic: add check for MAX_SKB_FRAGS
net: atlantic: reduce scope of is_rsc_complete
net: atlantic: fix "frag[0] not initialized"
net: stmmac: fix missing pci_disable_device() on error in stmmac_pci_probe()
net: phy: micrel: Fix incorrect variable type in micrel
decnet: Use container_of() for struct dn_neigh casts
...
Every caller has a readily available vfio_device pointer, use that instead
of passing in a generic struct device. The struct vfio_device already
contains the group we need so this avoids complexity, extra refcountings,
and a confusing lifecycle model.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v4-8045e76bf00b+13d-vfio_mdev_no_group_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The next patch wants the vfio_device instead. There is no reason to store
a pointer here since we can container_of back to the vfio_device.
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v4-8045e76bf00b+13d-vfio_mdev_no_group_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
All callers have a struct vfio_device trivially available, pass it in
directly and avoid calling the expensive vfio_group_get_from_dev().
Acked-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v4-8045e76bf00b+13d-vfio_mdev_no_group_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
clock_delta is declared as unsigned long in various places. However,
the clock sync delta can be negative. This would add a huge positive
offset in clock_sync_global where clock_delta is added to clk.eitod
which is a 72 bit integer. Declare it as signed long to fix this.
Cc: stable@vger.kernel.org
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
smatch complains about
drivers/s390/net/lcs.c:1741 lcs_get_control() warn: variable dereferenced before check 'card->dev' (see line 1739)
Fixes: 27eb5ac8f0 ("[PATCH] s390: lcs driver bug fixes and improvements [1/2]")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
smatch complains about
drivers/s390/net/ctcm_mpc.c:1210 ctcmpc_unpack_skb() warn: possible memory leak of 'mpcginfo'
mpc_action_discontact() did not free mpcginfo. Consolidate the freeing in
ctcmpc_unpack_skb().
Fixes: 293d984f0e ("ctcm: infrastructure for replaced ctc driver")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Found by cppcheck and smatch.
smatch complains about
drivers/s390/net/ctcm_sysfs.c:43 ctcm_buffer_write() warn: variable dereferenced before check 'priv' (see line 42)
Fixes: 3c09e2647b ("ctcm: rename READ/WRITE defines to avoid redefinitions")
Reported-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently many console drivers for s390 rely on panic/reboot notifiers
to invoke callbacks on these events. The panic() function disables local
IRQs, secondary CPUs and preemption, so callbacks invoked on panic are
effectively running in atomic context.
Happens that most of these console callbacks from s390 doesn't take the
proper care with regards to atomic context, like taking spinlocks that
might be taken in other function/CPU and hence will cause a lockup
situation.
The goal for this patch is to improve the notifiers reliability, acting
on 4 console drivers, as detailed below:
(1) con3215: changed a regular spinlock to the trylock alternative.
(2) con3270: also changed a regular spinlock to its trylock counterpart,
but here we also have another problem: raw3270_activate_view() takes a
different spinlock. So, we worked a helper to validate if this other lock
is safe to acquire, and if so, raw3270_activate_view() should be safe.
Notice though that there is a functional change here: it's now possible
to continue the notifier code [reaching con3270_wait_write() and
con3270_rebuild_update()] without executing raw3270_activate_view().
(3) sclp: a global lock is used heavily in the functions called from
the notifier, so we added a check here - if the lock is taken already,
we just bail-out, preventing the lockup.
(4) sclp_vt220: same as (3), a lock validation was added to prevent the
potential lockup problem.
Besides (1)-(4), we also removed useless void functions, adding the
code called from the notifier inside its own body, and changed the
priority of such notifiers to execute late, since they are "heavyweight"
for the panic environment, so we aim to reduce risks here.
Changed return values to NOTIFY_DONE as well, the standard one.
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Link: https://lore.kernel.org/r/20220427224924.592546-14-gpiccoli@igalia.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Drivers should call the TSO setting helper, GSO is controllable
by user space.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use kzalloc rather than duplicating its implementation, which
makes code simple and easy to understand.
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20220505141733.1989450-6-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Read requests that return with NRF error are partially completed in
dasd_eckd_ese_read(). The function keeps track of the amount of
processed bytes and the driver will eventually return this information
back to the block layer for further processing via __dasd_cleanup_cqr()
when the request is in the final stage of processing (from the driver's
perspective).
For this, blk_update_request() is used which requires the number of
bytes to complete the request. As per documentation the nr_bytes
parameter is described as follows:
"number of bytes to complete for @req".
This was mistakenly interpreted as "number of bytes _left_ for @req"
leading to new requests with incorrect data length. The consequence are
inconsistent and completely wrong read requests as data from random
memory areas are read back.
Fix this by correctly specifying the amount of bytes that should be used
to complete the request.
Fixes: 5e6bdd37c5 ("s390/dasd: fix data corruption for thin provisioned devices")
Cc: stable@vger.kernel.org # 5.3+
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20220505141733.1989450-5-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Sven Schnelle