Commit Graph

6046 Commits

Author SHA1 Message Date
Linus Torvalds e5476f57b3 gpio updates for v6.5
Core GPIO library:
 - remove unused symbols
 - don't spam the kernel log with messages about hogs
 - remove old sysfs API cruft
 - improve handling of GPIO masks
 
 New drivers
 - add a driver for the BlueField-3 GPIO controller
 - add GPIO support for the TPS65219 PMIC
 
 Driver improvements:
 - extend the gpio-aggregator driver to support ramp-up/ramp-down delay
 - remove unnecessary CONFIG_OF guards from gpio-aggregator
 - readability improvements in gpio-tangier
 - switch i2c drivers back to using probe() now that it's been converted in
   the i2c subsystem to not taking the id parameter
 - remove unused inclusions of of_gpio.h in several drivers
 - make pm ops static in gpio-davinci and fix a comment
 - use more devres in drivers to shrink and simplify the code
 - add missing include in gpio-sa1100
 - add HAS_IOPORT KConfig dependency where needed
 - add permissions checks before accessing pins in gpio-tegra186
 - convert the gpio-zynq driver to using immutable irqchips
 - preserve output settings set by the bootloader in gpio-mpc8xxx
 
 Selftests:
 - tweak the variable naming in script tests
 
 Device tree updates:
 - convert gpio-mmio and gpio-stmpe to YAML
 - add parsing of GPIO hogs to gpio-vf610
 - add bindings for the Cirrus EP93xx GPIO controller
 - add gpio-line-names property to the gpio-pca9570 bindings
 - extend the binding for x-powers,axp209 with another block
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAmSbB5YACgkQEacuoBRx
 13I8xhAAoI9irAnAbh+Lgn0EdziMlqE6E8oohBtRY7rHK7Pi3IZNoATK3GT5bebF
 a0+EzqOTM22g2qIv41zkG7SyBgdkRg6Ld+/ogvlgddphhEGxY3MdRbSyPacHlzj1
 BYnOJt+uQ46TwnzyTjVLn/1aGcD2LPB0j4rS1HnbsDHT8xGAjdq2O3YYNH7ZairA
 ZbIc/2Cpn4X1YWXX+s3a4B8w1eCEoRNG2Fvie6hmr518TSctP/MiFe6W7+eQrHwT
 GI491Rr4qT/lmRFVsxslYUPREUe/va8RM3uIC23zEkZYjsbRLJ2tvCGulm8D/H1n
 rUB9yXj+n5mCjTH7Gebg7J99NKpHo4uoXKrFhhetH9a0adsJCOwBr14YO8NP66jK
 hmZW8f8+QEAA4nhXx0VqpOp1FGw5unhPF/k8Apct8TeVJCv9i8g5QRreTf1030Hl
 l8x7JhsHlZGADGeLBPaNBIjuCB99YEMNtl4Ouzh7w1/1JsFcwI/cdASNxrsI4SCf
 Tl92+xAqZlfnnuHAQFiBBwKxnsHxclBwq3umMQD7kB3cdMELh2gqA3M8F+NGp5SB
 XMcE3gwDH53fXu74523G36sqNqkLNF0K974LwzSz0t4A8tSlwbt2esvzpxa0bDLe
 oqYD+TGAvX+uzr05KZ1kyUfD+95mMHsYY9sQWoUzHQelGmXV32M=
 =3KNJ
 -----END PGP SIGNATURE-----

Merge tag 'gpio-updates-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

Pull gpio updates from Bartosz Golaszewski:
 "We have two new drivers, some improvements to the core code, lots of
  different updates to existing GPIO drivers and some dt-bindings on
  top.

  There's nothing controversial in here and almost everything has been
  in next for more than a week (95% a lot longer than this). The only
  thing that has spent less time in next is a new driver so no risk of
  regressions.

  The single merge pulls in changes that remove all usage of global GPIO
  numbers from arch/arm/mach-omap.

  Core GPIO library:
   - remove unused symbols
   - don't spam the kernel log with messages about hogs
   - remove old sysfs API cruft
   - improve handling of GPIO masks

  New drivers:
   - add a driver for the BlueField-3 GPIO controller
   - add GPIO support for the TPS65219 PMIC

  Driver improvements:
   - extend the gpio-aggregator driver to support ramp-up/ramp-down
     delay
   - remove unnecessary CONFIG_OF guards from gpio-aggregator
   - readability improvements in gpio-tangier
   - switch i2c drivers back to using probe() now that it's been
     converted in the i2c subsystem to not taking the id parameter
   - remove unused inclusions of of_gpio.h in several drivers
   - make pm ops static in gpio-davinci and fix a comment
   - use more devres in drivers to shrink and simplify the code
   - add missing include in gpio-sa1100
   - add HAS_IOPORT KConfig dependency where needed
   - add permissions checks before accessing pins in gpio-tegra186
   - convert the gpio-zynq driver to using immutable irqchips
   - preserve output settings set by the bootloader in gpio-mpc8xxx

  Selftests:
   - tweak the variable naming in script tests

  Device tree updates:
   - convert gpio-mmio and gpio-stmpe to YAML
   - add parsing of GPIO hogs to gpio-vf610
   - add bindings for the Cirrus EP93xx GPIO controller
   - add gpio-line-names property to the gpio-pca9570 bindings
   - extend the binding for x-powers,axp209 with another block"

* tag 'gpio-updates-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (58 commits)
  of: unittest: drop assertions for GPIO hog messages
  gpiolib: Drop unused domain_ops memeber of GPIO IRQ chip
  gpio: synq: remove unused zynq_gpio_irq_reqres/zynq_gpio_irq_relres
  dt-bindings: gpio: gpio-vf610: Add parsing of hogs
  gpio: lpc18xx: Remove unused of_gpio.h inclusion
  gpio: xra1403: Remove unused of_gpio.h inclusion
  gpio: mpc8xxx: Remove unused of_gpio.h inclusion
  dt-bindings: gpio: Add Cirrus EP93xx
  gpio: mpc8xxx: latch GPIOs state on module load when configured as output
  selftests: gpio: gpio-sim: Use same variable name for sysfs pathname
  gpio: mlxbf3: Add gpio driver support
  gpio: delay: Remove duplicative functionality
  gpio: aggregator: Set up a parser of delay line parameters
  gpio: aggregator: Support delay for setting up individual GPIOs
  gpio: aggregator: Remove CONFIG_OF and of_match_ptr() protections
  dt-bindings: gpio: pca9570: add gpio-line-names property
  gpiolib: remove unused gpio_cansleep()
  gpio: tps65219: add GPIO support for TPS65219 PMIC
  gpio: zynq: fix zynqmp_gpio not an immutable chip warning
  gpio: davinci: make davinci_gpio_dev_pm_ops static
  ...
2023-06-29 10:11:10 -07:00
Ulf Hansson b1a665932d mmc: mmci: Add support for SW busy-end timeouts
The ux500 variant doesn't have a HW based timeout to use for busy-end IRQs.
To avoid hanging and waiting for the card to stop signaling busy, let's
schedule a delayed work, according to the corresponding cmd->busy_timeout
for the command. If the work gets to run, let's kick the IRQ handler to
complete the currently running request/command.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20230620091113.33393-1-ulf.hansson@linaro.org
2023-06-22 11:06:37 +02:00
Yann Gautier b5c3eb3857 mmc: mmci: stm32: add delay block support for STM32MP25
On STM32MP25, the delay block is inside the SoC, and configured through
the SYSCFG registers. The algorithm is also different from what was in
STM32MP1 chip.

Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Link: https://lore.kernel.org/r/20230619115120.64474-7-yann.gautier@foss.st.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-20 11:44:40 +02:00
Yann Gautier 83efc782dc mmc: mmci: stm32: prepare other delay block support
Create an sdmmc_tuning_ops struct to ease support for another
delay block peripheral.

Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Link: https://lore.kernel.org/r/20230619115120.64474-6-yann.gautier@foss.st.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-20 11:44:40 +02:00
Yann Gautier 27bdc37c39 mmc: mmci: stm32: manage block gap hardware flow control
In stm32 sdmmc variant revision v3.0, a block gap hardware flow control
should be used with bus speed modes SDR104 and HS200.
It is enabled by writing a non-null value to the new added register
MMCI_STM32_FIFOTHRR.
The threshold will be 2^(N-1) bytes, so we can use the ffs() function to
compute the value N to be written to the register. The threshold used
should be the data block size, but must not be bigger than the FIFO size.

Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Link: https://lore.kernel.org/r/20230619115120.64474-5-yann.gautier@foss.st.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-20 11:44:40 +02:00
Yann Gautier ea9ca04119 mmc: mmci: Add support for sdmmc variant revision v3.0
This is an update of the SDMMC revision v2.2, with just an increased
FIFO size, from 64B to 1kB.

Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Link: https://lore.kernel.org/r/20230619115120.64474-4-yann.gautier@foss.st.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-20 11:44:40 +02:00
Yann Gautier 88167e6c2e mmc: mmci: add stm32_idmabsize_align parameter
The alignment for the IDMA size depends on the peripheral version, it
should then be configurable. Add stm32_idmabsize_align in the variant
structure.
And remove now unused (and wrong) MMCI_STM32_IDMABNDT_* macros.

Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Link: https://lore.kernel.org/r/20230619115120.64474-3-yann.gautier@foss.st.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-20 11:44:40 +02:00
Ulf Hansson 40e46f88a2 mmc: Merge branch fixes into next
Merge the mmc fixes for v6.4-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.5.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-19 13:41:58 +02:00
Sergey Shtylyov 413db49973 mmc: usdhi60rol0: fix deferred probing
The driver overrides the error codes returned by platform_get_irq_byname()
to -ENODEV, so if it returns -EPROBE_DEFER, the driver will fail the probe
permanently instead of the deferred probing.  Switch to propagating error
codes upstream.

Fixes: 9ec36cafe4 ("of/irq: do irq resolution in platform_get_irq")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20230617203622.6812-13-s.shtylyov@omp.ru
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-19 13:32:39 +02:00
Sergey Shtylyov c2df53c580 mmc: sunxi: fix deferred probing
The driver overrides the error codes and IRQ0 returned by platform_get_irq()
to -EINVAL, so if it returns -EPROBE_DEFER, the driver will fail the probe
permanently instead of the deferred probing. Switch to propagating the error
codes upstream.  Since commit ce753ad154 ("platform: finally disallow IRQ0
in platform_get_irq() and its ilk") IRQ0 is no longer returned by those APIs,
so we now can safely ignore it...

Fixes: 2408a08583 ("mmc: sunxi-mmc: Handle return value of platform_get_irq")
Cc: stable@vger.kernel.org # v5.19+
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230617203622.6812-12-s.shtylyov@omp.ru
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-19 13:31:40 +02:00
Sergey Shtylyov 5b067d7f85 mmc: sh_mmcif: fix deferred probing
The driver overrides the error codes returned by platform_get_irq() to
-ENXIO, so if it returns -EPROBE_DEFER, the driver will fail the probe
permanently instead of the deferred probing. Switch to propagating the
error codes upstream.

Fixes: 9ec36cafe4 ("of/irq: do irq resolution in platform_get_irq")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20230617203622.6812-11-s.shtylyov@omp.ru
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-19 13:31:12 +02:00
Sergey Shtylyov 8d0caeedcd mmc: sdhci-spear: fix deferred probing
The driver overrides the error codes and IRQ0 returned by platform_get_irq()
to -EINVAL, so if it returns -EPROBE_DEFER, the driver will fail the probe
permanently instead of the deferred probing. Switch to propagating the error
codes upstream.  Since commit ce753ad154 ("platform: finally disallow IRQ0
in platform_get_irq() and its ilk") IRQ0 is no longer returned by those APIs,
so we now can safely ignore it...

Fixes: 682798a596 ("mmc: sdhci-spear: Handle return value of platform_get_irq")
Cc: stable@vger.kernel.org # v5.19+
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230617203622.6812-10-s.shtylyov@omp.ru
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-19 13:31:12 +02:00
Sergey Shtylyov b465dea5e1 mmc: sdhci-acpi: fix deferred probing
The driver overrides the error codes returned by platform_get_irq() to
-EINVAL, so if it returns -EPROBE_DEFER, the driver will fail the probe
permanently instead of the deferred probing. Switch to propagating the
error codes upstream.

Fixes: 1b7ba57ecc ("mmc: sdhci-acpi: Handle return value of platform_get_irq")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230617203622.6812-9-s.shtylyov@omp.ru
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-19 13:31:12 +02:00
Sergey Shtylyov 3c482e1e83 mmc: owl: fix deferred probing
The driver overrides the error codes returned by platform_get_irq() to
-EINVAL, so if it returns -EPROBE_DEFER, the driver will fail the probe
permanently instead of the deferred probing. Switch to propagating the
error codes upstream.

Fixes: ff65ffe46d ("mmc: Add Actions Semi Owl SoCs SD/MMC driver")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20230617203622.6812-8-s.shtylyov@omp.ru
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-19 13:31:12 +02:00
Sergey Shtylyov fb51b74a57 mmc: omap_hsmmc: fix deferred probing
The driver overrides the error codes returned by platform_get_irq() to
-ENXIO, so if it returns -EPROBE_DEFER, the driver will fail the probe
permanently instead of the deferred probing. Switch to propagating the
error codes upstream.

Fixes: 9ec36cafe4 ("of/irq: do irq resolution in platform_get_irq")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20230617203622.6812-7-s.shtylyov@omp.ru
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-19 13:31:12 +02:00
Sergey Shtylyov aedf4ba1ad mmc: omap: fix deferred probing
The driver overrides the error codes returned by platform_get_irq() to
-ENXIO, so if it returns -EPROBE_DEFER, the driver will fail the probe
permanently instead of the deferred probing. Switch to propagating the
error codes upstream.

Fixes: 9ec36cafe4 ("of/irq: do irq resolution in platform_get_irq")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20230617203622.6812-6-s.shtylyov@omp.ru
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-19 13:31:12 +02:00
Sergey Shtylyov 8d84064da0 mmc: mvsdio: fix deferred probing
The driver overrides the error codes returned by platform_get_irq() to
-ENXIO, so if it returns -EPROBE_DEFER, the driver will fail the probe
permanently instead of the deferred probing. Switch to propagating the
error codes upstream.

Fixes: 9ec36cafe4 ("of/irq: do irq resolution in platform_get_irq")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20230617203622.6812-5-s.shtylyov@omp.ru
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-19 13:31:12 +02:00
Sergey Shtylyov 0c4dc0f054 mmc: mtk-sd: fix deferred probing
The driver overrides the error codes returned by platform_get_irq() to
-EINVAL, so if it returns -EPROBE_DEFER, the driver will fail the probe
permanently instead of the deferred probing. Switch to propagating the
error codes upstream.

Fixes: 208489032b ("mmc: mediatek: Add Mediatek MMC driver")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20230617203622.6812-4-s.shtylyov@omp.ru
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-19 13:31:12 +02:00
Sergey Shtylyov b8ada54fa1 mmc: meson-gx: fix deferred probing
The driver overrides the error codes and IRQ0 returned by platform_get_irq()
to -EINVAL, so if it returns -EPROBE_DEFER, the driver will fail the probe
permanently instead of the deferred probing. Switch to propagating the error
codes upstream.  Since commit ce753ad154 ("platform: finally disallow IRQ0
in platform_get_irq() and its ilk") IRQ0 is no longer returned by those APIs,
so we now can safely ignore it...

Fixes: cbcaac6d7d ("mmc: meson-gx-mmc: Fix platform_get_irq's error checking")
Cc: stable@vger.kernel.org # v5.19+
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230617203622.6812-3-s.shtylyov@omp.ru
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-19 13:31:12 +02:00
Sergey Shtylyov 71150ac125 mmc: bcm2835: fix deferred probing
The driver overrides the error codes and IRQ0 returned by platform_get_irq()
to -EINVAL, so if it returns -EPROBE_DEFER, the driver will fail the probe
permanently instead of the deferred probing. Switch to propagating the error
codes upstream.  Since commit ce753ad154 ("platform: finally disallow IRQ0
in platform_get_irq() and its ilk") IRQ0 is no longer returned by those APIs,
so we now can safely ignore it...

Fixes: 660fc733bd ("mmc: bcm2835: Add new driver for the sdhost controller.")
Cc: stable@vger.kernel.org # v5.19+
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20230617203622.6812-2-s.shtylyov@omp.ru
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-19 13:31:12 +02:00
Jisheng Zhang f334ad4768 mmc: litex_mmc: set PROBE_PREFER_ASYNCHRONOUS
mmc host drivers should have enabled the asynchronous probe option, but
it seems like we didn't set it for litex_mmc when introducing litex mmc
support, so let's set it now.

Tested with linux-on-litex-vexriscv on sipeed tang nano 20K fpga.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Gabriel Somlo <gsomlo@gmail.com>
Fixes: 92e0991047 ("mmc: Add driver for LiteX's LiteSDCard interface")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230617085319.2139-1-jszhang@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-19 13:22:24 +02:00
Linus Walleij 4711c6ab58 mmc: mmci: Break out a helper function
These four lines clearing, masking and resetting the state
of the busy detect state machine is repeated five times in
the code so break this out to a small helper so things are
easier to read.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230405-pl180-busydetect-fix-v7-9-69a7164f2a61@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-19 13:14:26 +02:00
Linus Walleij ddb5a92da5 mmc: mmci: Use a switch statement machine
As is custom, use a big switch statement to transition
between the edges of the state machine inside
the ux500 ->busy_complete callback.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230405-pl180-busydetect-fix-v7-8-69a7164f2a61@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-19 13:14:26 +02:00
Linus Walleij e85fecc386 mmc: mmci: Use state machine state as exit condition
Return true if and only if we reached the state
MMCI_BUSY_DONE in the ux500 ->busy_complete() callback.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230405-pl180-busydetect-fix-v7-7-69a7164f2a61@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-19 13:14:26 +02:00
Linus Walleij 7892497f1f mmc: mmci: Retry the busy start condition
This makes the ux500 ->busy_complete() callback re-read
the status register 10 times while waiting for the busy
signal to assert in the status register.

If this does not happen, we bail out regarding the
command completed already, i.e. before we managed to
start to check the busy status.

There is a comment in the code about this, let's just
implement it to be certain that we can catch this glitch
if it happens.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230405-pl180-busydetect-fix-v7-6-69a7164f2a61@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-19 13:14:26 +02:00
Linus Walleij 7be5ac5f7a mmc: mmci: Make busy complete state machine explicit
This refactors the ->busy_complete() callback currently
only used by Ux500 and STM32 to handle busy detection on
hardware where one and the same IRQ is fired whether we get
a start or an end signal on busy detect.

The code is currently using the cached status from the
command IRQ in ->busy_status as a state to select what to
do next: if this state is non-zero we are waiting for
IRQs and if it is zero we treat the state as the starting
point for a busy detect wait cycle.

Make this explicit by creating a state machine where the
->busy_complete callback moves between three states.

The Ux500 busy detect code currently assumes this order:
we enable the busy detect IRQ, get a busy start IRQ, then a
busy end IRQ, and then we clear and mask this IRQ and
proceed.

We insert debug prints for unexpected states.

This works as before on most cards, however on a
problematic card that is not working with busy detect, and
which I have been debugging, the following happens a lot:

[    3.380554] mmci-pl18x 80005000.mmc: no busy signalling in time
[    3.387420] mmci-pl18x 80005000.mmc: no busy signalling in time
[    3.394561] mmci-pl18x 80005000.mmc: lost busy status
     when waiting for busy start IRQ

This probably means that the busy detect start IRQ has
already occurred when we start executing the
->busy_complete() callbacks, and the busy detect end IRQ
is counted as the start IRQ, and this is what is causing
the card to not be detected properly.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230405-pl180-busydetect-fix-v7-5-69a7164f2a61@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-19 13:14:26 +02:00
Linus Walleij e1a2485cc3 mmc: mmci: Break out error check in busy detect
The busy detect callback for Ux500 checks for an error
in the status in the first if() clause. The only practical
reason is that if an error occurs, the if()-clause is not
executed, and the code falls through to the last
if()-clause if (host->busy_status) which will clear and
disable the irq. Make this explicit instead: it is easier
to read.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230405-pl180-busydetect-fix-v7-4-69a7164f2a61@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-19 13:14:26 +02:00
Linus Walleij 8a6a9e7972 mmc: mmci: Stash status while waiting for busy
Some interesting flags can arrive while we are waiting for
the first busy detect IRQ so OR then onto the stashed
flags so they are not missed.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230405-pl180-busydetect-fix-v7-3-69a7164f2a61@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-19 13:14:26 +02:00
Linus Walleij 479d8e61f6 mmc: mmci: Unwind big if() clause
This does two things: firsr replace the hard-to-read long
if-expression:

  if (!host->busy_status && !(status & err_msk) &&
      (readl(base + MMCISTATUS) & host->variant->busy_detect_flag)) {

With the more readable:

  if (!host->busy_status && !(status & err_msk)) {
     status = readl(base + MMCISTATUS);
     if (status & host->variant->busy_detect_flag) {

Second notice that the re-read MMCISTATUS register is now
stored into the status variable, using logic OR because what
if something else changed too?

While we are at it, explain what the function is doing.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230405-pl180-busydetect-fix-v7-2-69a7164f2a61@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-19 13:14:26 +02:00
Linus Walleij 2673493fdf mmc: mmci: Clear busy_status when starting command
If we are starting a command which can generate a busy
response, then clear the variable host->busy_status
if the variant is using a ->busy_complete callback.

We are lucky that the member is zero by default and
hopefully always gets cleared in the ->busy_complete
callback even on errors, but it's just fragile so
make sure it is always initialized to zero.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230405-pl180-busydetect-fix-v7-1-69a7164f2a61@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-19 13:14:26 +02:00
Ulf Hansson ae6a2c4405 mmc: Merge branch fixes into next
Merge the mmc fixes for v6.4-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.5.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-15 15:06:53 +02:00
Yann Gautier 16f2e6c01f mmc: mmci: stm32: set feedback clock when using delay block
The feedback clock is used only for SDR104 & HS200 modes, and when
delay block is used (frequency is higher than 50 MHz). The tuning
procedure is then only required for those modes. Skip the procedure
for other modes.
The setting of this feedback clock is done just after enabling delay
block, and before configuring it.

Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Link: https://lore.kernel.org/r/20230613150148.429828-1-yann.gautier@foss.st.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-15 15:06:19 +02:00
Martin Hundebøll 3c40eb8145 mmc: meson-gx: remove redundant mmc_request_done() call from irq context
The call to mmc_request_done() can schedule, so it must not be called
from irq context. Wake the irq thread if it needs to be called, and let
its existing logic do its work.

Fixes the following kernel bug, which appears when running an RT patched
kernel on the AmLogic Meson AXG A113X SoC:
[   11.111407] BUG: scheduling while atomic: kworker/0:1H/75/0x00010001
[   11.111438] Modules linked in:
[   11.111451] CPU: 0 PID: 75 Comm: kworker/0:1H Not tainted 6.4.0-rc3-rt2-rtx-00081-gfd07f41ed6b4-dirty 
[   11.111461] Hardware name: RTX AXG A113X Linux Platform Board (DT)
[   11.111469] Workqueue: kblockd blk_mq_run_work_fn
[   11.111492] Call trace:
[   11.111497]  dump_backtrace+0xac/0xe8
[   11.111510]  show_stack+0x18/0x28
[   11.111518]  dump_stack_lvl+0x48/0x60
[   11.111530]  dump_stack+0x18/0x24
[   11.111537]  __schedule_bug+0x4c/0x68
[   11.111548]  __schedule+0x80/0x574
[   11.111558]  schedule_loop+0x2c/0x50
[   11.111567]  schedule_rtlock+0x14/0x20
[   11.111576]  rtlock_slowlock_locked+0x468/0x730
[   11.111587]  rt_spin_lock+0x40/0x64
[   11.111596]  __wake_up_common_lock+0x5c/0xc4
[   11.111610]  __wake_up+0x18/0x24
[   11.111620]  mmc_blk_mq_req_done+0x68/0x138
[   11.111633]  mmc_request_done+0x104/0x118
[   11.111644]  meson_mmc_request_done+0x38/0x48
[   11.111654]  meson_mmc_irq+0x128/0x1f0
[   11.111663]  __handle_irq_event_percpu+0x70/0x114
[   11.111674]  handle_irq_event_percpu+0x18/0x4c
[   11.111683]  handle_irq_event+0x80/0xb8
[   11.111691]  handle_fasteoi_irq+0xa4/0x120
[   11.111704]  handle_irq_desc+0x20/0x38
[   11.111712]  generic_handle_domain_irq+0x1c/0x28
[   11.111721]  gic_handle_irq+0x8c/0xa8
[   11.111735]  call_on_irq_stack+0x24/0x4c
[   11.111746]  do_interrupt_handler+0x88/0x94
[   11.111757]  el1_interrupt+0x34/0x64
[   11.111769]  el1h_64_irq_handler+0x18/0x24
[   11.111779]  el1h_64_irq+0x64/0x68
[   11.111786]  __add_wait_queue+0x0/0x4c
[   11.111795]  mmc_blk_rw_wait+0x84/0x118
[   11.111804]  mmc_blk_mq_issue_rq+0x5c4/0x654
[   11.111814]  mmc_mq_queue_rq+0x194/0x214
[   11.111822]  blk_mq_dispatch_rq_list+0x3ac/0x528
[   11.111834]  __blk_mq_sched_dispatch_requests+0x340/0x4d0
[   11.111847]  blk_mq_sched_dispatch_requests+0x38/0x70
[   11.111858]  blk_mq_run_work_fn+0x3c/0x70
[   11.111865]  process_one_work+0x17c/0x1f0
[   11.111876]  worker_thread+0x1d4/0x26c
[   11.111885]  kthread+0xe4/0xf4
[   11.111894]  ret_from_fork+0x10/0x20

Fixes: 51c5d8447b ("MMC: meson: initial support for GX platforms")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Hundebøll <martin@geanix.com>
Link: https://lore.kernel.org/r/20230607082713.517157-1-martin@geanix.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-14 12:28:46 +02:00
Christophe Kerello 47b3ad6b78 mmc: mmci: stm32: fix max busy timeout calculation
The way that the timeout is currently calculated could lead to a u64
timeout value in mmci_start_command(). This value is then cast in a u32
register that leads to mmc erase failed issue with some SD cards.

Fixes: 8266c585f4 ("mmc: mmci: add hardware busy timeout feature")
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230613134146.418016-1-yann.gautier@foss.st.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-13 16:19:50 +02:00
Ulf Hansson 3108eb2e8a mmc: mmci: Set PROBE_PREFER_ASYNCHRONOUS
All mmc host drivers should have the asynchronous probe option enabled, but
it seems like we failed to set it for mmci, so let's do that now.

Fixes: 21b2cec61c ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Yann Gautier <yann.gautier@foss.st.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230612143730.210390-1-ulf.hansson@linaro.org
2023-06-13 16:06:48 +02:00
Ulf Hansson 30d60844a0 mmc: Merge branch fixes into next
Merge the mmc fixes for v6.4-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.5.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-13 10:41:28 +02:00
Stephan Gerhold e6f9e590b7 mmc: sdhci-msm: Disable broken 64-bit DMA on MSM8916
While SDHCI claims to support 64-bit DMA on MSM8916 it does not seem to
be properly functional. It is not immediately obvious because SDHCI is
usually used with IOMMU bypassed on this SoC, and all physical memory
has 32-bit addresses. But when trying to enable the IOMMU it quickly
fails with an error such as the following:

  arm-smmu 1e00000.iommu: Unhandled context fault:
    fsr=0x402, iova=0xfffff200, fsynr=0xe0000, cbfrsynra=0x140, cb=3
  mmc1: ADMA error: 0x02000000
  mmc1: sdhci: ============ SDHCI REGISTER DUMP ===========
  mmc1: sdhci: Sys addr:  0x00000000 | Version:  0x00002e02
  mmc1: sdhci: Blk size:  0x00000008 | Blk cnt:  0x00000000
  mmc1: sdhci: Argument:  0x00000000 | Trn mode: 0x00000013
  mmc1: sdhci: Present:   0x03f80206 | Host ctl: 0x00000019
  mmc1: sdhci: Power:     0x0000000f | Blk gap:  0x00000000
  mmc1: sdhci: Wake-up:   0x00000000 | Clock:    0x00000007
  mmc1: sdhci: Timeout:   0x0000000a | Int stat: 0x00000001
  mmc1: sdhci: Int enab:  0x03ff900b | Sig enab: 0x03ff100b
  mmc1: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
  mmc1: sdhci: Caps:      0x322dc8b2 | Caps_1:   0x00008007
  mmc1: sdhci: Cmd:       0x0000333a | Max curr: 0x00000000
  mmc1: sdhci: Resp[0]:   0x00000920 | Resp[1]:  0x5b590000
  mmc1: sdhci: Resp[2]:   0xe6487f80 | Resp[3]:  0x0a404094
  mmc1: sdhci: Host ctl2: 0x00000008
  mmc1: sdhci: ADMA Err:  0x00000001 | ADMA Ptr: 0x0000000ffffff224
  mmc1: sdhci_msm: ----------- VENDOR REGISTER DUMP -----------
  mmc1: sdhci_msm: DLL sts: 0x00000000 | DLL cfg:  0x60006400 | DLL cfg2: 0x00000000
  mmc1: sdhci_msm: DLL cfg3: 0x00000000 | DLL usr ctl:  0x00000000 | DDR cfg: 0x00000000
  mmc1: sdhci_msm: Vndr func: 0x00018a9c | Vndr func2 : 0xf88018a8 Vndr func3: 0x00000000
  mmc1: sdhci: ============================================
  mmc1: sdhci: fffffffff200: DMA 0x0000ffffffffe100, LEN 0x0008, Attr=0x21
  mmc1: sdhci: fffffffff20c: DMA 0x0000000000000000, LEN 0x0000, Attr=0x03

Looking closely it's obvious that only the 32-bit part of the address
(0xfffff200) arrives at the SMMU, the higher 16-bit (0xffff...) get
lost somewhere. This might not be a limitation of the SDHCI itself but
perhaps the bus/interconnect it is connected to, or even the connection
to the SMMU.

Work around this by setting SDHCI_QUIRK2_BROKEN_64_BIT_DMA to avoid
using 64-bit addresses.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230518-msm8916-64bit-v1-1-5694b0f35211@gerhold.net
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-12 16:06:23 +02:00
Abel Vesa c7eed31e23 mmc: sdhci-msm: Switch to the new ICE API
Now that there is a new dedicated ICE driver, drop the sdhci-msm ICE
implementation and use the new ICE api provided by the Qualcomm soc
driver ice. The platforms that already have ICE support will use the
API as library since there will not be a devicetree node, but instead
they have reg range. In this case, the of_qcom_ice_get will return an
ICE instance created for the consumer's device. But if there are
platforms that do not have ice reg in the consumer devicetree node
and instead provide a dedicated ICE devicetree node, theof_qcom_ice_get
will look up the device based on qcom,ice property and will get the ICE
instance registered by the probe function of the ice driver.

The ICE clock is now handle by the new driver. This is done by enabling
it on the creation of the ICE instance and then enabling/disabling it on
SDCC runtime resume/suspend.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20230408214041.533749-4-abel.vesa@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-12 15:20:08 +02:00
Victor Shih 0e92aec2ef mmc: sdhci-pci-gli: Add support SD Express card for GL9767
Add support SD Express card for GL9767. The workflow of the
SD Express card in GL9767 is as below.
1. GL9767 operates in SD mode and set MMC_CAP2_SD_EXP flag.
2. If card is inserted, Host send CMD8 to ask the capabilities
   of the card.
3. If the card has PCIe capability, then init_sd_express()
   will be invoked.
4. If the card has been put in write protect state then the
   SD features supported by SD mode but not supported by
   PCIe mode, therefore GL9767 switch to SD mode.
5. If the card has not been put in write protect state then
   GL9767 switch from SD mode to PCIe/NVMe mode and mmc driver
   handover control to NVMe driver.
6. If card is removed, GL9767 will return to SD mode.

Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230609071441.451464-5-victorshihgli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-12 15:20:08 +02:00
Victor Shih 17b492117b mmc: sdhci: Add VDD2 definition for power control register
Add new definition for VDD2 - UHS2 or PCIe/NVMe.

Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230609071441.451464-4-victorshihgli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-12 15:20:08 +02:00
Victor Shih d275435551 mmc: sdhci-pci-gli: Set SDR104's clock to 205MHz and enable SSC for GL9767
Set GL9767 SDR104's clock to 205MHz and enable SSC feature
depend on register 0x888 BIT(1).

Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230609071441.451464-3-victorshihgli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-12 15:20:08 +02:00
Victor Shih f3a5b56c12 mmc: sdhci-pci-gli: Add Genesys Logic GL9767 support
Add support for the GL9767 chipset. GL9767 supports
SD3 mode likes UHS-I SDR50, SDR104.
Enable MSI interrupt for GL9767. Some platform do not
support PCI INTx and devices can not work without
interrupt.

Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230609071441.451464-2-victorshihgli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-12 15:20:08 +02:00
Wenbin Mei f2764e1f79 mmc: mtk-sd: reduce CIT for better performance
CQHCI_SSC1 indicates to CQE the polling period to use when using periodic
SEND_QUEUE_STATUS(CMD13) polling.
Since MSDC CQE uses msdc_hclk as ITCFVAL, so driver should use hclk
frequency to get the actual time.
The default value 0x1000 that corresponds to 150us for MediaTek SoCs, let's
decrease it to 0x40 that corresponds to 2.35us, which can improve the
performance of some eMMC devices.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230609101355.5220-2-wenbin.mei@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-12 15:20:08 +02:00
Chevron Li 20dbd07ef0 mmc: sdhci: fix DMA configure compatibility issue when 64bit DMA mode is used.
Bayhub SD host has hardware limitation:
1.The upper 32bit address is inhibited to be written at SD Host Register
  [03E][13]=0 (32bits addressing) mode, is admitted to be written only at
  SD Host Register [03E][13]=1 (64bits addressing) mode.
2.Because of above item#1, need to configure SD Host Register [03E][13] to
  1(64bits addressing mode) before set 64bit ADMA system address's higher
  32bits SD Host Register [05F~05C] if 64 bits addressing mode is used.

The hardware limitation is reasonable for below reasons:
1.Normal flow should set DMA working mode first, then do
  DMA-transfer-related configuration, such as system address.
2.The hardware limitation may avoid the software to configure wrong higher
  32bit address at 32bits addressing mode although it is redundant.

The change that set 32bits/64bits addressing mode before set ADMA address,
  has no side-effect to other host IPs for below reason:
The setting order is reasonable and standard: DMA Mode setting first and
  then DMA address setting. It meets all DMA setting sequence.

Signed-off-by: Chevron Li <chevron.li@bayhubtech.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230523111114.18124-1-chevron_li@126.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-12 15:19:47 +02:00
Douglas Anderson a3332b7aad mmc: mediatek: Avoid ugly error message when SDIO wakeup IRQ isn't used
When I boot a kukui-kodama board, I see an ugly warning in my kernel
log:
  mtk-msdc 11240000.mmc: error -ENXIO: IRQ sdio_wakeup not found

It's pretty normal not to have an "sdio_wakeup" IRQ defined. In fact,
no device trees in mainline seem to have it. Let's use the
platform_get_irq_byname_optional() to avoid the error message.

Fixes: 527f36f5ef ("mmc: mediatek: add support for SDIO eint wakup IRQ")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20230510064434.1.I935404c5396e6bf952e99bb7ffb744c6f7fd430b@changeid
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-12 15:16:18 +02:00
Simon Horman 6151bc77da mmc: meson-mx-sdhc: Avoid cast to incompatible function type
Rather than casting mmc_free_host to an incompatible function type,
provide a trivial wrapper with the correct signature for the use-case.

Reported by clang-16 with W=1:

 .../meson-mx-sdhc-mmc.c:791:38: error: cast from 'void (*)(struct mmc_host *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
         ret = devm_add_action_or_reset(dev, (void(*)(void *))mmc_free_host,
                                            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 ./include/linux/device.h:265:38: note: expanded from macro 'devm_add_action_or_reset'
         __devm_add_action_or_reset(release, action, data, #action)
                                            ^~~~~~

The same approach is taken in litex_mmc.c with the function
litex_mmc_free_host_wrapper(). There may be scope for consolidation.

No functional change intended.
Compile tested only.

Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20230510-mmc-sdhci-msm-function-cast-v1-1-5ae634b24fbd@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-12 15:16:18 +02:00
Uwe Kleine-König 982fe2e093 mmc: dw_mmc: Make dw_mci_pltfm_remove() return void
dw_mci_pltfm_remove() returned zero unconditionally. Make it return void
instead which makes its semantics a bit clearer.

Convert the drivers that use this function as .remove() callback to
.remove_new() which has the right prototype. This helps getting rid of
the platform_driver's remove callback that returns an int (which is
error prone). The other users didn't check the return value anyhow.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230505221506.1247424-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-12 15:16:18 +02:00
Linus Walleij e519f0bb64 ARM/mmc: Convert old mmci-omap to GPIO descriptors
A recent change to the OMAP driver making it use a dynamic GPIO
base created problems with some old OMAP1 board files, among
them Nokia 770, SX1 and also the OMAP2 Nokia n8x0.

Fix up all instances of GPIOs being used for the MMC driver
by pushing the handling of power, slot selection and MMC
"cover" into the driver as optional GPIOs.

This is maybe not the most perfect solution as the MMC
framework have some central handlers for some of the
stuff, but it at least makes the situtation better and
solves the immediate issue.

Fixes: 92bf78b33b ("gpio: omap: use dynamic allocation of base")
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-05-24 15:01:36 +02:00
Deren Wu a99d21cefd mmc: vub300: fix invalid response handling
We may get an empty response with zero length at the beginning of
the driver start and get following UBSAN error. Since there is no
content(SDRT_NONE) for the response, just return and skip the response
handling to avoid this problem.

Test pass : SDIO wifi throughput test with this patch

[  126.980684] UBSAN: array-index-out-of-bounds in drivers/mmc/host/vub300.c:1719:12
[  126.980709] index -1 is out of range for type 'u32 [4]'
[  126.980729] CPU: 4 PID: 9 Comm: kworker/u16:0 Tainted: G            E      6.3.0-rc4-mtk-local-202304272142 
[  126.980754] Hardware name: Intel(R) Client Systems NUC8i7BEH/NUC8BEB, BIOS BECFL357.86A.0081.2020.0504.1834 05/04/2020
[  126.980770] Workqueue: kvub300c vub300_cmndwork_thread [vub300]
[  126.980833] Call Trace:
[  126.980845]  <TASK>
[  126.980860]  dump_stack_lvl+0x48/0x70
[  126.980895]  dump_stack+0x10/0x20
[  126.980916]  ubsan_epilogue+0x9/0x40
[  126.980944]  __ubsan_handle_out_of_bounds+0x70/0x90
[  126.980979]  vub300_cmndwork_thread+0x58e7/0x5e10 [vub300]
[  126.981018]  ? _raw_spin_unlock+0x18/0x40
[  126.981042]  ? finish_task_switch+0x175/0x6f0
[  126.981070]  ? __switch_to+0x42e/0xda0
[  126.981089]  ? __switch_to_asm+0x3a/0x80
[  126.981129]  ? __pfx_vub300_cmndwork_thread+0x10/0x10 [vub300]
[  126.981174]  ? __kasan_check_read+0x11/0x20
[  126.981204]  process_one_work+0x7ee/0x13d0
[  126.981246]  worker_thread+0x53c/0x1240
[  126.981291]  kthread+0x2b8/0x370
[  126.981312]  ? __pfx_worker_thread+0x10/0x10
[  126.981336]  ? __pfx_kthread+0x10/0x10
[  126.981359]  ret_from_fork+0x29/0x50
[  126.981400]  </TASK>

Fixes: 88095e7b47 ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver")
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/048cd6972c50c33c2e8f81d5228fed928519918b.1683987673.git.deren.wu@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-05-24 14:30:51 +02:00
Haibo Chen 81dce1490e mmc: sdhci-esdhc-imx: make "no-mmc-hs400" works
After commit 1ed5c3b22f ("mmc: sdhci-esdhc-imx: Propagate
ESDHC_FLAG_HS400* only on 8bit bus"), the property "no-mmc-hs400"
from device tree file do not work any more.
This patch reorder the code, which can avoid the warning message
"drop HS400 support since no 8-bit bus" and also make the property
"no-mmc-hs400" from dts file works.

Fixes: 1ed5c3b22f ("mmc: sdhci-esdhc-imx: Propagate ESDHC_FLAG_HS400* only on 8bit bus")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230504112222.3599602-1-haibo.chen@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-05-09 11:55:02 +02:00