blocklisting (fencing) with a couple of prerequisites and a fixup to
prevent metrics from being sent to the MDS even just once after that
has been disabled by the user. All marked for stable.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmTD7MgTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi3SBB/4nHdfSQwy0z2+PM766sUKxSlmaRw8X
4AJyGAIGj5BnHHhtluwLpEYfrh3wfyCRaNYgS64jdsudbUBxPKIIWn2lEFxtyWbC
w0R2uEc+NGJLJOYfJ+lBP06Q2r6qk7N6OGNy6qLaN+v6xJ8WPw7H3fJBLVhnPgMq
7lkACRN+0P5Xt6ZJ57kbWWiFQ+vjv7bbDa0P9zMl6uCgoYsIpvrskqygx+gHbdsq
IcnpsHu3F0ycYAJT5eJ5GcCcThvwbNjWdbJy1fERah7U/LNcX/S3To9V5LPmydOQ
tYAWMlC/1a99fr+jTYF0Pu5GLUdK0UMKeX04ZN3SKON4pORurpypw3n8
=rw72
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-6.5-rc4' of https://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"A patch to reduce the potential for erroneous RBD exclusive lock
blocklisting (fencing) with a couple of prerequisites and a fixup to
prevent metrics from being sent to the MDS even just once after that
has been disabled by the user. All marked for stable"
* tag 'ceph-for-6.5-rc4' of https://github.com/ceph/ceph-client:
rbd: retrieve and check lock owner twice before blocklisting
rbd: harden get_lock_owner_info() a bit
rbd: make get_lock_owner_info() return a single locker or NULL
ceph: never send metrics if disable_send_metrics is set
-----BEGIN PGP SIGNATURE-----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=TD54
-----END PGP SIGNATURE-----
Merge tag 'block-6.5-2023-07-28' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"A few fixes that should go into the current kernel release, mainly:
- Set of fixes for dasd (Stefan)
- Handle interruptible waits returning because of a signal for ublk
(Ming)"
* tag 'block-6.5-2023-07-28' of git://git.kernel.dk/linux:
ublk: return -EINTR if breaking from waiting for existed users in DEL_DEV
ublk: fail to recover device if queue setup is interrupted
ublk: fail to start device if queue setup is interrupted
block: Fix a source code comment in include/uapi/linux/blkzoned.h
s390/dasd: print copy pair message only for the correct error
s390/dasd: fix hanging device after request requeue
s390/dasd: use correct number of retries for ERP requests
s390/dasd: fix hanging device after quiesce/resume
If user interrupts wait_event_interruptible() in ublk_ctrl_del_dev(),
return -EINTR and let user know what happens.
Fixes: 0abe39dec0 ("block: ublk: improve handling device deletion")
Reported-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20230726144502.566785-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In ublk_ctrl_end_recovery(), if wait_for_completion_interruptible() is
interrupted by signal, queues aren't setup successfully yet, so we
have to fail UBLK_CMD_END_USER_RECOVERY, otherwise kernel oops can be
triggered.
Fixes: c732a852b4 ("ublk_drv: add START_USER_RECOVERY and END_USER_RECOVERY support")
Reported-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20230726144502.566785-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In ublk_ctrl_start_dev(), if wait_for_completion_interruptible() is
interrupted by signal, queues aren't setup successfully yet, so we
have to fail UBLK_CMD_START_DEV, otherwise kernel oops can be triggered.
Reported by German when working on qemu-storage-deamon which requires
single thread ublk daemon.
Fixes: 71f28f3136 ("ublk_drv: add io_uring based userspace block driver")
Reported-by: German Maglione <gmaglione@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230726144502.566785-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
An attempt to acquire exclusive lock can race with the current lock
owner closing the image:
1. lock is held by client123, rbd_lock() returns -EBUSY
2. get_lock_owner_info() returns client123 instance details
3. client123 closes the image, lock is released
4. find_watcher() returns 0 as there is no matching watcher anymore
5. client123 instance gets erroneously blocklisted
Particularly impacted is mirror snapshot scheduler in snapshot-based
mirroring since it happens to open and close images a lot (images are
opened only for as long as it takes to take the next mirror snapshot,
the same client instance is used for all images).
To reduce the potential for erroneous blocklisting, retrieve the lock
owner again after find_watcher() returns 0. If it's still there, make
sure it matches the previously detected lock owner.
Cc: stable@vger.kernel.org # f38cb9d9c204: rbd: make get_lock_owner_info() return a single locker or NULL
Cc: stable@vger.kernel.org # 8ff2c64c9765: rbd: harden get_lock_owner_info() a bit
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
- we want the exclusive lock type, so test for it directly
- use sscanf() to actually parse the lock cookie and avoid admitting
invalid handles
- bail if locker has a blank address
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Make the "num_lockers can be only 0 or 1" assumption explicit and
simplify the API by getting rid of output parameters in preparation
for calling get_lock_owner_info() twice before blocklisting.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
-----BEGIN PGP SIGNATURE-----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=e2OR
-----END PGP SIGNATURE-----
Merge tag 'block-6.5-2023-07-21' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- Fix for loop regressions (Mauricio)
- Fix a potential stall with batched wakeups in sbitmap (David)
- Fix for stall with recursive plug flushes (Ross)
- Skip accounting of empty requests for blk-iocost (Chengming)
- Remove a dead field in struct blk_mq_hw_ctx (Chengming)
* tag 'block-6.5-2023-07-21' of git://git.kernel.dk/linux:
loop: do not enforce max_loop hard limit by (new) default
loop: deprecate autoloading callback loop_probe()
sbitmap: fix batching wakeup
blk-iocost: skip empty flush bio in iocost
blk-mq: delete dead struct blk_mq_hw_ctx->queued field
blk-mq: Fix stall due to recursive flush plug
Problem:
The max_loop parameter is used for 2 different purposes:
1) initial number of loop devices to pre-create on init
2) maximum number of loop devices to add on access/open()
Historically, its default value (zero) caused 1) to create non-zero
number of devices (CONFIG_BLK_DEV_LOOP_MIN_COUNT), and no hard limit on
2) to add devices with autoloading.
However, the default value changed in commit 85c5019771 ("loop: Fix
the max_loop commandline argument treatment when it is set to 0") to
CONFIG_BLK_DEV_LOOP_MIN_COUNT, for max_loop=0 not to pre-create devices.
That does improve 1), but unfortunately it breaks 2), as the default
behavior changed from no-limit to hard-limit.
Example:
For example, this userspace code broke for N >= CONFIG, if the user
relied on the default value 0 for max_loop:
mknod("/dev/loopN");
open("/dev/loopN"); // now fails with ENXIO
Though affected users may "fix" it with (loop.)max_loop=0, this means to
require a kernel parameter change on stable kernel update (that commit
Fixes: an old commit in stable).
Solution:
The original semantics for the default value in 2) can be applied if the
parameter is not set (ie, default behavior).
This still keeps the intended function in 1) and 2) if set, and that
commit's intended improvement in 1) if max_loop=0.
Before 85c50197716c:
- default: 1) CONFIG devices 2) no limit
- max_loop=0: 1) CONFIG devices 2) no limit
- max_loop=X: 1) X devices 2) X limit
After 85c50197716c:
- default: 1) CONFIG devices 2) CONFIG limit (*)
- max_loop=0: 1) 0 devices (*) 2) no limit
- max_loop=X: 1) X devices 2) X limit
This commit:
- default: 1) CONFIG devices 2) no limit (*)
- max_loop=0: 1) 0 devices 2) no limit
- max_loop=X: 1) X devices 2) X limit
Future:
The issue/regression from that commit only affects code under the
CONFIG_BLOCK_LEGACY_AUTOLOAD deprecation guard, thus the fix too is
contained under it.
Once that deprecated functionality/code is removed, the purpose 2) of
max_loop (hard limit) is no longer in use, so the module parameter
description can be changed then.
Tests:
Linux 6.4-rc7
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLOCK_LEGACY_AUTOLOAD=y
- default (original)
# ls -1 /dev/loop*
/dev/loop-control
/dev/loop0
...
/dev/loop7
# ./test-loop
open: /dev/loop8: No such device or address
- default (patched)
# ls -1 /dev/loop*
/dev/loop-control
/dev/loop0
...
/dev/loop7
# ./test-loop
#
- max_loop=0 (original & patched):
# ls -1 /dev/loop*
/dev/loop-control
# ./test-loop
#
- max_loop=8 (original & patched):
# ls -1 /dev/loop*
/dev/loop-control
/dev/loop0
...
/dev/loop7
# ./test-loop
open: /dev/loop8: No such device or address
- max_loop=0 (patched; CONFIG_BLOCK_LEGACY_AUTOLOAD is not set)
# ls -1 /dev/loop*
/dev/loop-control
# ./test-loop
open: /dev/loop8: No such device or address
Fixes: 85c5019771 ("loop: Fix the max_loop commandline argument treatment when it is set to 0")
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230720143033.841001-3-mfo@canonical.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The 'probe' callback in __register_blkdev() is only used under the
CONFIG_BLOCK_LEGACY_AUTOLOAD deprecation guard.
The loop_probe() function is only used for that callback, so guard it
too, accordingly.
See commit fbdee71bb5 ("block: deprecate autoloading based on dev_t").
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230720143033.841001-2-mfo@canonical.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In virtblk_probe_zoned_device(), execute blk_queue_chunk_sectors() and
blk_queue_max_zone_append_sectors() to respectively set the zoned device
zone size and maximum zone append sector limit before executing
blk_revalidate_disk_zones(). This is to allow the block layer zone
reavlidation to check these device characteristics prior to checking all
zones of the device.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230703024812.76778-5-dlemoal@kernel.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In null_register_zoned_dev(), execute blk_queue_chunk_sectors() and
blk_queue_max_zone_append_sectors() to respectively set the zoned device
zone size and maximum zone append sector limit before executing
blk_revalidate_disk_zones(). This is to allow the block layer zone
reavlidation to check these device characteristics prior to checking all
zones of the device.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230703024812.76778-4-dlemoal@kernel.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Core
----
- Rework the sendpage & splice implementations. Instead of feeding
data into sockets page by page extend sendmsg handlers to support
taking a reference on the data, controlled by a new flag called
MSG_SPLICE_PAGES. Rework the handling of unexpected-end-of-file
to invoke an additional callback instead of trying to predict what
the right combination of MORE/NOTLAST flags is.
Remove the MSG_SENDPAGE_NOTLAST flag completely.
- Implement SCM_PIDFD, a new type of CMSG type analogous to
SCM_CREDENTIALS, but it contains pidfd instead of plain pid.
- Enable socket busy polling with CONFIG_RT.
- Improve reliability and efficiency of reporting for ref_tracker.
- Auto-generate a user space C library for various Netlink families.
Protocols
---------
- Allow TCP to shrink the advertised window when necessary, prevent
sk_rcvbuf auto-tuning from growing the window all the way up to
tcp_rmem[2].
- Use per-VMA locking for "page-flipping" TCP receive zerocopy.
- Prepare TCP for device-to-device data transfers, by making sure
that payloads are always attached to skbs as page frags.
- Make the backoff time for the first N TCP SYN retransmissions
linear. Exponential backoff is unnecessarily conservative.
- Create a new MPTCP getsockopt to retrieve all info (MPTCP_FULL_INFO).
- Avoid waking up applications using TLS sockets until we have
a full record.
- Allow using kernel memory for protocol ioctl callbacks, paving
the way to issuing ioctls over io_uring.
- Add nolocalbypass option to VxLAN, forcing packets to be fully
encapsulated even if they are destined for a local IP address.
- Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
in-kernel ECMP implementation (e.g. Open vSwitch) select the same
link for all packets. Support L4 symmetric hashing in Open vSwitch.
- PPPoE: make number of hash bits configurable.
- Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
(ipconfig).
- Add layer 2 miss indication and filtering, allowing higher layers
(e.g. ACL filters) to make forwarding decisions based on whether
packet matched forwarding state in lower devices (bridge).
- Support matching on Connectivity Fault Management (CFM) packets.
- Hide the "link becomes ready" IPv6 messages by demoting their
printk level to debug.
- HSR: don't enable promiscuous mode if device offloads the proto.
- Support active scanning in IEEE 802.15.4.
- Continue work on Multi-Link Operation for WiFi 7.
BPF
---
- Add precision propagation for subprogs and callbacks. This allows
maintaining verification efficiency when subprograms are used,
or in fact passing the verifier at all for complex programs,
especially those using open-coded iterators.
- Improve BPF's {g,s}setsockopt() length handling. Previously BPF
assumed the length is always equal to the amount of written data.
But some protos allow passing a NULL buffer to discover what
the output buffer *should* be, without writing anything.
- Accept dynptr memory as memory arguments passed to helpers.
- Add routing table ID to bpf_fib_lookup BPF helper.
- Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands.
- Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
maps as read-only).
- Show target_{obj,btf}_id in tracing link fdinfo.
- Addition of several new kfuncs (most of the names are self-explanatory):
- Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
and bpf_dynptr_clone().
- bpf_task_under_cgroup()
- bpf_sock_destroy() - force closing sockets
- bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs
Netfilter
---------
- Relax set/map validation checks in nf_tables. Allow checking
presence of an entry in a map without using the value.
- Increase ip_vs_conn_tab_bits range for 64BIT builds.
- Allow updating size of a set.
- Improve NAT tuple selection when connection is closing.
Driver API
----------
- Integrate netdev with LED subsystem, to allow configuring HW
"offloaded" blinking of LEDs based on link state and activity
(i.e. packets coming in and out).
- Support configuring rate selection pins of SFP modules.
- Factor Clause 73 auto-negotiation code out of the drivers, provide
common helper routines.
- Add more fool-proof helpers for managing lifetime of MDIO devices
associated with the PCS layer.
- Allow drivers to report advanced statistics related to Time Aware
scheduler offload (taprio).
- Allow opting out of VF statistics in link dump, to allow more VFs
to fit into the message.
- Split devlink instance and devlink port operations.
New hardware / drivers
----------------------
- Ethernet:
- Synopsys EMAC4 IP support (stmmac)
- Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
- Marvell 88E6250 7 port switches
- Microchip LAN8650/1 Rev.B0 PHYs
- MediaTek MT7981/MT7988 built-in 1GE PHY driver
- WiFi:
- Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
- Realtek RTL8723DS (SDIO variant)
- Realtek RTL8851BE
- CAN:
- Fintek F81604
Drivers
-------
- Ethernet NICs:
- Intel (100G, ice):
- support dynamic interrupt allocation
- use meta data match instead of VF MAC addr on slow-path
- nVidia/Mellanox:
- extend link aggregation to handle 4, rather than just 2 ports
- spawn sub-functions without any features by default
- OcteonTX2:
- support HTB (Tx scheduling/QoS) offload
- make RSS hash generation configurable
- support selecting Rx queue using TC filters
- Wangxun (ngbe/txgbe):
- add basic Tx/Rx packet offloads
- add phylink support (SFP/PCS control)
- Freescale/NXP (enetc):
- report TAPRIO packet statistics
- Solarflare/AMD:
- support matching on IP ToS and UDP source port of outer header
- VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
- add devlink dev info support for EF10
- Virtual NICs:
- Microsoft vNIC:
- size the Rx indirection table based on requested configuration
- support VLAN tagging
- Amazon vNIC:
- try to reuse Rx buffers if not fully consumed, useful for ARM
servers running with 16kB pages
- Google vNIC:
- support TCP segmentation of >64kB frames
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- enable USXGMII (88E6191X)
- Microchip:
- lan966x: add support for Egress Stage 0 ACL engine
- lan966x: support mapping packet priority to internal switch
priority (based on PCP or DSCP)
- Ethernet PHYs:
- Broadcom PHYs:
- support for Wake-on-LAN for BCM54210E/B50212E
- report LPI counter
- Microsemi PHYs: support RGMII delay configuration (VSC85xx)
- Micrel PHYs: receive timestamp in the frame (LAN8841)
- Realtek PHYs: support optional external PHY clock
- Altera TSE PCS: merge the driver into Lynx PCS which it is
a variant of
- CAN: Kvaser PCIEcan:
- support packet timestamping
- WiFi:
- Intel (iwlwifi):
- major update for new firmware and Multi-Link Operation (MLO)
- configuration rework to drop test devices and split
the different families
- support for segmented PNVM images and power tables
- new vendor entries for PPAG (platform antenna gain) feature
- Qualcomm 802.11ax (ath11k):
- Multiple Basic Service Set Identifier (MBSSID) and
Enhanced MBSSID Advertisement (EMA) support in AP mode
- support factory test mode
- RealTek (rtw89):
- add RSSI based antenna diversity
- support U-NII-4 channels on 5 GHz band
- RealTek (rtl8xxxu):
- AP mode support for 8188f
- support USB RX aggregation for the newer chips
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=9i4I
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking changes from Jakub Kicinski:
"WiFi 7 and sendpage changes are the biggest pieces of work for this
release. The latter will definitely require fixes but I think that we
got it to a reasonable point.
Core:
- Rework the sendpage & splice implementations
Instead of feeding data into sockets page by page extend sendmsg
handlers to support taking a reference on the data, controlled by a
new flag called MSG_SPLICE_PAGES
Rework the handling of unexpected-end-of-file to invoke an
additional callback instead of trying to predict what the right
combination of MORE/NOTLAST flags is
Remove the MSG_SENDPAGE_NOTLAST flag completely
- Implement SCM_PIDFD, a new type of CMSG type analogous to
SCM_CREDENTIALS, but it contains pidfd instead of plain pid
- Enable socket busy polling with CONFIG_RT
- Improve reliability and efficiency of reporting for ref_tracker
- Auto-generate a user space C library for various Netlink families
Protocols:
- Allow TCP to shrink the advertised window when necessary, prevent
sk_rcvbuf auto-tuning from growing the window all the way up to
tcp_rmem[2]
- Use per-VMA locking for "page-flipping" TCP receive zerocopy
- Prepare TCP for device-to-device data transfers, by making sure
that payloads are always attached to skbs as page frags
- Make the backoff time for the first N TCP SYN retransmissions
linear. Exponential backoff is unnecessarily conservative
- Create a new MPTCP getsockopt to retrieve all info
(MPTCP_FULL_INFO)
- Avoid waking up applications using TLS sockets until we have a full
record
- Allow using kernel memory for protocol ioctl callbacks, paving the
way to issuing ioctls over io_uring
- Add nolocalbypass option to VxLAN, forcing packets to be fully
encapsulated even if they are destined for a local IP address
- Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
in-kernel ECMP implementation (e.g. Open vSwitch) select the same
link for all packets. Support L4 symmetric hashing in Open vSwitch
- PPPoE: make number of hash bits configurable
- Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
(ipconfig)
- Add layer 2 miss indication and filtering, allowing higher layers
(e.g. ACL filters) to make forwarding decisions based on whether
packet matched forwarding state in lower devices (bridge)
- Support matching on Connectivity Fault Management (CFM) packets
- Hide the "link becomes ready" IPv6 messages by demoting their
printk level to debug
- HSR: don't enable promiscuous mode if device offloads the proto
- Support active scanning in IEEE 802.15.4
- Continue work on Multi-Link Operation for WiFi 7
BPF:
- Add precision propagation for subprogs and callbacks. This allows
maintaining verification efficiency when subprograms are used, or
in fact passing the verifier at all for complex programs,
especially those using open-coded iterators
- Improve BPF's {g,s}setsockopt() length handling. Previously BPF
assumed the length is always equal to the amount of written data.
But some protos allow passing a NULL buffer to discover what the
output buffer *should* be, without writing anything
- Accept dynptr memory as memory arguments passed to helpers
- Add routing table ID to bpf_fib_lookup BPF helper
- Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands
- Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
maps as read-only)
- Show target_{obj,btf}_id in tracing link fdinfo
- Addition of several new kfuncs (most of the names are
self-explanatory):
- Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
and bpf_dynptr_clone().
- bpf_task_under_cgroup()
- bpf_sock_destroy() - force closing sockets
- bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs
Netfilter:
- Relax set/map validation checks in nf_tables. Allow checking
presence of an entry in a map without using the value
- Increase ip_vs_conn_tab_bits range for 64BIT builds
- Allow updating size of a set
- Improve NAT tuple selection when connection is closing
Driver API:
- Integrate netdev with LED subsystem, to allow configuring HW
"offloaded" blinking of LEDs based on link state and activity
(i.e. packets coming in and out)
- Support configuring rate selection pins of SFP modules
- Factor Clause 73 auto-negotiation code out of the drivers, provide
common helper routines
- Add more fool-proof helpers for managing lifetime of MDIO devices
associated with the PCS layer
- Allow drivers to report advanced statistics related to Time Aware
scheduler offload (taprio)
- Allow opting out of VF statistics in link dump, to allow more VFs
to fit into the message
- Split devlink instance and devlink port operations
New hardware / drivers:
- Ethernet:
- Synopsys EMAC4 IP support (stmmac)
- Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
- Marvell 88E6250 7 port switches
- Microchip LAN8650/1 Rev.B0 PHYs
- MediaTek MT7981/MT7988 built-in 1GE PHY driver
- WiFi:
- Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
- Realtek RTL8723DS (SDIO variant)
- Realtek RTL8851BE
- CAN:
- Fintek F81604
Drivers:
- Ethernet NICs:
- Intel (100G, ice):
- support dynamic interrupt allocation
- use meta data match instead of VF MAC addr on slow-path
- nVidia/Mellanox:
- extend link aggregation to handle 4, rather than just 2 ports
- spawn sub-functions without any features by default
- OcteonTX2:
- support HTB (Tx scheduling/QoS) offload
- make RSS hash generation configurable
- support selecting Rx queue using TC filters
- Wangxun (ngbe/txgbe):
- add basic Tx/Rx packet offloads
- add phylink support (SFP/PCS control)
- Freescale/NXP (enetc):
- report TAPRIO packet statistics
- Solarflare/AMD:
- support matching on IP ToS and UDP source port of outer
header
- VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
- add devlink dev info support for EF10
- Virtual NICs:
- Microsoft vNIC:
- size the Rx indirection table based on requested
configuration
- support VLAN tagging
- Amazon vNIC:
- try to reuse Rx buffers if not fully consumed, useful for ARM
servers running with 16kB pages
- Google vNIC:
- support TCP segmentation of >64kB frames
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- enable USXGMII (88E6191X)
- Microchip:
- lan966x: add support for Egress Stage 0 ACL engine
- lan966x: support mapping packet priority to internal switch
priority (based on PCP or DSCP)
- Ethernet PHYs:
- Broadcom PHYs:
- support for Wake-on-LAN for BCM54210E/B50212E
- report LPI counter
- Microsemi PHYs: support RGMII delay configuration (VSC85xx)
- Micrel PHYs: receive timestamp in the frame (LAN8841)
- Realtek PHYs: support optional external PHY clock
- Altera TSE PCS: merge the driver into Lynx PCS which it is a
variant of
- CAN: Kvaser PCIEcan:
- support packet timestamping
- WiFi:
- Intel (iwlwifi):
- major update for new firmware and Multi-Link Operation (MLO)
- configuration rework to drop test devices and split the
different families
- support for segmented PNVM images and power tables
- new vendor entries for PPAG (platform antenna gain) feature
- Qualcomm 802.11ax (ath11k):
- Multiple Basic Service Set Identifier (MBSSID) and Enhanced
MBSSID Advertisement (EMA) support in AP mode
- support factory test mode
- RealTek (rtw89):
- add RSSI based antenna diversity
- support U-NII-4 channels on 5 GHz band
- RealTek (rtl8xxxu):
- AP mode support for 8188f
- support USB RX aggregation for the newer chips"
* tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1602 commits)
net: scm: introduce and use scm_recv_unix helper
af_unix: Skip SCM_PIDFD if scm->pid is NULL.
net: lan743x: Simplify comparison
netlink: Add __sock_i_ino() for __netlink_diag_dump().
net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses
Revert "af_unix: Call scm_recv() only after scm_set_cred()."
phylink: ReST-ify the phylink_pcs_neg_mode() kdoc
libceph: Partially revert changes to support MSG_SPLICE_PAGES
net: phy: mscc: fix packet loss due to RGMII delays
net: mana: use vmalloc_array and vcalloc
net: enetc: use vmalloc_array and vcalloc
ionic: use vmalloc_array and vcalloc
pds_core: use vmalloc_array and vcalloc
gve: use vmalloc_array and vcalloc
octeon_ep: use vmalloc_array and vcalloc
net: usb: qmi_wwan: add u-blox 0x1312 composition
perf trace: fix MSG_SPLICE_PAGES build error
ipvlan: Fix return value of ipvlan_queue_xmit()
netfilter: nf_tables: fix underflow in chain reference counter
netfilter: nf_tables: unbind non-anonymous set if rule construction fails
...
- Yosry has also eliminated cgroup's atomic rstat flushing.
- Nhat Pham adds the new cachestat() syscall. It provides userspace
with the ability to query pagecache status - a similar concept to
mincore() but more powerful and with improved usability.
- Mel Gorman provides more optimizations for compaction, reducing the
prevalence of page rescanning.
- Lorenzo Stoakes has done some maintanance work on the get_user_pages()
interface.
- Liam Howlett continues with cleanups and maintenance work to the maple
tree code. Peng Zhang also does some work on maple tree.
- Johannes Weiner has done some cleanup work on the compaction code.
- David Hildenbrand has contributed additional selftests for
get_user_pages().
- Thomas Gleixner has contributed some maintenance and optimization work
for the vmalloc code.
- Baolin Wang has provided some compaction cleanups,
- SeongJae Park continues maintenance work on the DAMON code.
- Huang Ying has done some maintenance on the swap code's usage of
device refcounting.
- Christoph Hellwig has some cleanups for the filemap/directio code.
- Ryan Roberts provides two patch series which yield some
rationalization of the kernel's access to pte entries - use the provided
APIs rather than open-coding accesses.
- Lorenzo Stoakes has some fixes to the interaction between pagecache
and directio access to file mappings.
- John Hubbard has a series of fixes to the MM selftesting code.
- ZhangPeng continues the folio conversion campaign.
- Hugh Dickins has been working on the pagetable handling code, mainly
with a view to reducing the load on the mmap_lock.
- Catalin Marinas has reduced the arm64 kmalloc() minimum alignment from
128 to 8.
- Domenico Cerasuolo has improved the zswap reclaim mechanism by
reorganizing the LRU management.
- Matthew Wilcox provides some fixups to make gfs2 work better with the
buffer_head code.
- Vishal Moola also has done some folio conversion work.
- Matthew Wilcox has removed the remnants of the pagevec code - their
functionality is migrated over to struct folio_batch.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZJejewAKCRDdBJ7gKXxA
joggAPwKMfT9lvDBEUnJagY7dbDPky1cSYZdJKxxM2cApGa42gEA6Cl8HRAWqSOh
J0qXCzqaaN8+BuEyLGDVPaXur9KirwY=
=B7yQ
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
- Yosry Ahmed brought back some cgroup v1 stats in OOM logs
- Yosry has also eliminated cgroup's atomic rstat flushing
- Nhat Pham adds the new cachestat() syscall. It provides userspace
with the ability to query pagecache status - a similar concept to
mincore() but more powerful and with improved usability
- Mel Gorman provides more optimizations for compaction, reducing the
prevalence of page rescanning
- Lorenzo Stoakes has done some maintanance work on the
get_user_pages() interface
- Liam Howlett continues with cleanups and maintenance work to the
maple tree code. Peng Zhang also does some work on maple tree
- Johannes Weiner has done some cleanup work on the compaction code
- David Hildenbrand has contributed additional selftests for
get_user_pages()
- Thomas Gleixner has contributed some maintenance and optimization
work for the vmalloc code
- Baolin Wang has provided some compaction cleanups,
- SeongJae Park continues maintenance work on the DAMON code
- Huang Ying has done some maintenance on the swap code's usage of
device refcounting
- Christoph Hellwig has some cleanups for the filemap/directio code
- Ryan Roberts provides two patch series which yield some
rationalization of the kernel's access to pte entries - use the
provided APIs rather than open-coding accesses
- Lorenzo Stoakes has some fixes to the interaction between pagecache
and directio access to file mappings
- John Hubbard has a series of fixes to the MM selftesting code
- ZhangPeng continues the folio conversion campaign
- Hugh Dickins has been working on the pagetable handling code, mainly
with a view to reducing the load on the mmap_lock
- Catalin Marinas has reduced the arm64 kmalloc() minimum alignment
from 128 to 8
- Domenico Cerasuolo has improved the zswap reclaim mechanism by
reorganizing the LRU management
- Matthew Wilcox provides some fixups to make gfs2 work better with the
buffer_head code
- Vishal Moola also has done some folio conversion work
- Matthew Wilcox has removed the remnants of the pagevec code - their
functionality is migrated over to struct folio_batch
* tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (380 commits)
mm/hugetlb: remove hugetlb_set_page_subpool()
mm: nommu: correct the range of mmap_sem_read_lock in task_mem()
hugetlb: revert use of page_cache_next_miss()
Revert "page cache: fix page_cache_next/prev_miss off by one"
mm/vmscan: fix root proactive reclaim unthrottling unbalanced node
mm: memcg: rename and document global_reclaim()
mm: kill [add|del]_page_to_lru_list()
mm: compaction: convert to use a folio in isolate_migratepages_block()
mm: zswap: fix double invalidate with exclusive loads
mm: remove unnecessary pagevec includes
mm: remove references to pagevec
mm: rename invalidate_mapping_pagevec to mapping_try_invalidate
mm: remove struct pagevec
net: convert sunrpc from pagevec to folio_batch
i915: convert i915_gpu_error to use a folio_batch
pagevec: rename fbatch_count()
mm: remove check_move_unevictable_pages()
drm: convert drm_gem_put_pages() to use a folio_batch
i915: convert shmem_sg_free_table() to use a folio_batch
scatterlist: add sg_set_folio()
...
-----BEGIN PGP SIGNATURE-----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=zP4Y
-----END PGP SIGNATURE-----
Merge tag 'for-6.5/block-2023-06-23' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe pull request via Keith:
- Various cleanups all around (Irvin, Chaitanya, Christophe)
- Better struct packing (Christophe JAILLET)
- Reduce controller error logs for optional commands (Keith)
- Support for >=64KiB block sizes (Daniel Gomez)
- Fabrics fixes and code organization (Max, Chaitanya, Daniel
Wagner)
- bcache updates via Coly:
- Fix a race at init time (Mingzhe Zou)
- Misc fixes and cleanups (Andrea, Thomas, Zheng, Ye)
- use page pinning in the block layer for dio (David)
- convert old block dio code to page pinning (David, Christoph)
- cleanups for pktcdvd (Andy)
- cleanups for rnbd (Guoqing)
- use the unchecked __bio_add_page() for the initial single page
additions (Johannes)
- fix overflows in the Amiga partition handling code (Michael)
- improve mq-deadline zoned device support (Bart)
- keep passthrough requests out of the IO schedulers (Christoph, Ming)
- improve support for flush requests, making them less special to deal
with (Christoph)
- add bdev holder ops and shutdown methods (Christoph)
- fix the name_to_dev_t() situation and use cases (Christoph)
- decouple the block open flags from fmode_t (Christoph)
- ublk updates and cleanups, including adding user copy support (Ming)
- BFQ sanity checking (Bart)
- convert brd from radix to xarray (Pankaj)
- constify various structures (Thomas, Ivan)
- more fine grained persistent reservation ioctl capability checks
(Jingbo)
- misc fixes and cleanups (Arnd, Azeem, Demi, Ed, Hengqi, Hou, Jan,
Jordy, Li, Min, Yu, Zhong, Waiman)
* tag 'for-6.5/block-2023-06-23' of git://git.kernel.dk/linux: (266 commits)
scsi/sg: don't grab scsi host module reference
ext4: Fix warning in blkdev_put()
block: don't return -EINVAL for not found names in devt_from_devname
cdrom: Fix spectre-v1 gadget
block: Improve kernel-doc headers
blk-mq: don't insert passthrough request into sw queue
bsg: make bsg_class a static const structure
ublk: make ublk_chr_class a static const structure
aoe: make aoe_class a static const structure
block/rnbd: make all 'class' structures const
block: fix the exclusive open mask in disk_scan_partitions
block: add overflow checks for Amiga partition support
block: change all __u32 annotations to __be32 in affs_hardblocks.h
block: fix signed int overflow in Amiga partition support
block: add capacity validation in bdev_add_partition()
block: fine-granular CAP_SYS_ADMIN for Persistent Reservation
block: disallow Persistent Reservation on partitions
reiserfs: fix blkdev_put() warning from release_journal_dev()
block: fix wrong mode for blkdev_get_by_dev() from disk_scan_partitions()
block: document the holder argument to blkdev_get_by_path
...
Use sendmsg() conditionally with MSG_SPLICE_PAGES in _drbd_send_page()
rather than calling sendpage() or _drbd_no_send_page().
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Philipp Reisner <philipp.reisner@linbit.com>
cc: Lars Ellenberg <lars.ellenberg@linbit.com>
cc: "Christoph Böhmwalder" <christoph.boehmwalder@linbit.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: drbd-dev@lists.linbit.com
Link: https://lore.kernel.org/r/20230623225513.2732256-11-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the driver core allows for struct class to be in read-only
memory, move the ublk_chr_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230620180129.645646-7-gregkh@linuxfoundation.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that the driver core allows for struct class to be in read-only
memory, move the aoe_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Cc: Justin Sanders <justin@coraid.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230620180129.645646-6-gregkh@linuxfoundation.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that the driver core allows for struct class to be in read-only
memory, making all 'class' structures to be declared at build time
placing them into read-only memory, instead of having to be dynamically
allocated at load time.
Cc: "Md. Haris Iqbal" <haris.iqbal@ionos.com>
Cc: Jack Wang <jinpu.wang@ionos.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://lore.kernel.org/r/20230620180129.645646-5-gregkh@linuxfoundation.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit 07b679f70d.
This change appears to have broken things...
We now see applications hanging during disk accesses.
e.g.
multi-port virtio-blk device running in h/w (FPGA)
Host running a simple 'fio' test.
[global]
thread=1
direct=1
ioengine=libaio
norandommap=1
group_reporting=1
bs=4K
rw=read
iodepth=128
runtime=1
numjobs=4
time_based
[job0]
filename=/dev/vda
[job1]
filename=/dev/vdb
[job2]
filename=/dev/vdc
...
[job15]
filename=/dev/vdp
i.e. 16 disks; 4 queues per disk; simple burst of 4KB reads
This is repeatedly run in a loop.
After a few, normally <10 seconds, fio hangs.
With 64 queues (16 disks), failure occurs within a few seconds; with 8 queues (2 disks) it may take ~hour before hanging.
Last message:
fio-3.19
Starting 8 threads
Jobs: 1 (f=1): [_(7),R(1)][68.3%][eta 03h:11m:06s]
I think this means at the end of the run 1 queue was left incomplete.
'diskstats' (run while fio is hung) shows no outstanding transactions.
e.g.
$ cat /proc/diskstats
...
252 0 vda 1843140071 0 14745120568 712568645 0 0 0 0 0 3117947 712568645 0 0 0 0 0 0
252 16 vdb 1816291511 0 14530332088 704905623 0 0 0 0 0 3117711 704905623 0 0 0 0 0 0
...
Other stats (in the h/w, and added to the virtio-blk driver ([a]virtio_queue_rq(), [b]virtblk_handle_req(), [c]virtblk_request_done()) all agree, and show every request had a completion, and that virtblk_request_done() never gets called.
e.g.
PF= 0 vq=0 1 2 3
[a]request_count - 839416590 813148916 105586179 84988123
[b]completion1_count - 839416590 813148916 105586179 84988123
[c]completion2_count - 0 0 0 0
PF= 1 vq=0 1 2 3
[a]request_count - 823335887 812516140 104582672 75856549
[b]completion1_count - 823335887 812516140 104582672 75856549
[c]completion2_count - 0 0 0 0
i.e. the issue is after the virtio-blk driver.
This change was introduced in kernel 6.3.0.
I am seeing this using 6.3.3.
If I run with an earlier kernel (5.15), it does not occur.
If I make a simple patch to the 6.3.3 virtio-blk driver, to skip the blk_mq_add_to_batch()call, it does not fail.
e.g.
kernel 5.15 - this is OK
virtio_blk.c,virtblk_done() [irq handler]
if (likely(!blk_should_fake_timeout(req->q))) {
blk_mq_complete_request(req);
}
kernel 6.3.3 - this fails
virtio_blk.c,virtblk_handle_req() [irq handler]
if (likely(!blk_should_fake_timeout(req->q))) {
if (!blk_mq_complete_request_remote(req)) {
if (!blk_mq_add_to_batch(req, iob, virtblk_vbr_status(vbr), virtblk_complete_batch)) {
virtblk_request_done(req); //this never gets called... so blk_mq_add_to_batch() must always succeed
}
}
}
If I do, kernel 6.3.3 - this is OK
virtio_blk.c,virtblk_handle_req() [irq handler]
if (likely(!blk_should_fake_timeout(req->q))) {
if (!blk_mq_complete_request_remote(req)) {
virtblk_request_done(req); //force this here...
if (!blk_mq_add_to_batch(req, iob, virtblk_vbr_status(vbr), virtblk_complete_batch)) {
virtblk_request_done(req); //this never gets called... so blk_mq_add_to_batch() must always succeed
}
}
}
Perhaps you might like to fix/test/revert this change...
Martin
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306090826.C1fZmdMe-lkp@intel.com/
Cc: Suwan Kim <suwan.kim027@gmail.com>
Tested-by: edliaw@google.com
Reported-by: "Roberts, Martin" <martin.roberts@intel.com>
Message-Id: <336455b4f630f329380a8f53ee8cad3868764d5c.1686295549.git.mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fix a missing conversion to the new BLK_OPEN constant in swim.
Fixes: 05bdb99653 ("block: replace fmode_t with a block-specific type for block open flags")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230620043051.707196-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Recompression threshold should be below huge-size-class watermark. Any
object larger than huge-size-class is a "huge object" and occupies a
whole physical page on the zsmalloc side, in other words it's
incompressible, as far as zsmalloc is concerned.
Link: https://lkml.kernel.org/r/20230614141338.3480029-1-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Suggested-by: Brian Geffon <bgeffon@google.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The body of the loop is run without RCU lock held. Use the regular
cond_resched() instead of cond_resched_rcu().
Fixes: 786bb02458 ("brd: use XArray instead of radix-tree to index backing pages")
Suggested-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20230614133538.1279369-1-p.raghav@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The only overlap between the block open flags mapped into the fmode_t and
other uses of fmode_t are FMODE_READ and FMODE_WRITE. Define a new
blk_mode_t instead for use in blkdev_get_by_{dev,path}, ->open and
->ioctl and stop abusing fmode_t.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd]
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20230608110258.189493-28-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stop passing the fmode_t around and just use a simple bool to track if
an export is read-only.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://lore.kernel.org/r/20230608110258.189493-24-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The current interface for exclusive opens is rather confusing as it
requires both the FMODE_EXCL flag and a holder. Remove the need to pass
FMODE_EXCL and just key off the exclusive open off a non-NULL holder.
For blkdev_put this requires adding the holder argument, which provides
better debug checking that only the holder actually releases the hold,
but at the same time allows removing the now superfluous mode argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd]
Link: https://lore.kernel.org/r/20230608110258.189493-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Passing a holder to blkdev_get_by_path when FMODE_EXCL isn't set doesn't
make sense, so pass NULL instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://lore.kernel.org/r/20230608110258.189493-14-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The mode argument to the ->release block_device_operation is never used,
so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd]
Link: https://lore.kernel.org/r/20230608110258.189493-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
->open is only called on the whole device. Make that explicit by
passing a gendisk instead of the block_device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd]
Link: https://lore.kernel.org/r/20230608110258.189493-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bdev_check_media_change should only ever be called for the whole device.
Pass a gendisk to make that explicit and rename the function to
disk_check_media_change.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20230608110258.189493-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Let's always set errno after pr_err which is consistent with
default case.
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Link: https://lore.kernel.org/r/20230524070026.2932-7-guoqing.jiang@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Check ret is enough since if sess_dev is NULL which also
implies ret should be 0.
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Link: https://lore.kernel.org/r/20230524070026.2932-5-guoqing.jiang@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add one new array (marked with __maybe_unused to prevent gcc warning about
"defined but not used" with W=1), then we can remove rnbd_access_mode_str
and rnbd-common.c accordingly.
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://lore.kernel.org/r/20230524070026.2932-4-guoqing.jiang@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No need to include it since none of macros in limits.h are
used by rnbd-srv.
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Link: https://lore.kernel.org/r/20230524070026.2932-3-guoqing.jiang@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This routine is not called since added. Then the two flags
(RNBD_OP_LAST and RNBD_F_ALL) can be removed too after kill
rnbd_flags_supported.
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Link: https://lore.kernel.org/r/20230524070026.2932-2-guoqing.jiang@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=fNEf
-----END PGP SIGNATURE-----
Merge tag 'block-6.4-2023-06-09' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- Fix an issue with the hardware queue nr_active, causing it to become
imbalanced (Tian)
- Fix an issue with null_blk not releasing pages if configured as
memory backed (Nitesh)
- Fix a locking issue in dasd (Jan)
* tag 'block-6.4-2023-06-09' of git://git.kernel.dk/linux:
s390/dasd: Use correct lock while counting channel queue length
null_blk: Fix: memory release when memory_backed=1
blk-mq: fix blk_mq_hw_ctx active request accounting
Sort the headers in alphabetic order in order to ease
the maintenance for this part.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230310164549.22133-10-andriy.shevchenko@linux.intel.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In the snippets like the following
if (...)
return / goto / break / continue ...;
else
...
the 'else' is redundant. Get rid of it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230310164549.22133-9-andriy.shevchenko@linux.intel.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use DEFINE_SHOW_ATTRIBUTE() helper macro to simplify the code.
No functional change.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230310164549.22133-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since the commit 72deb455b5 ("block: remove CONFIG_LBDAF")
the sector_t is always 64-bit type, no need to cast anymore.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230310164549.22133-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The code can be neater without forward declarations.
Get rid of pkt_seq_show() forward declaration. This
will also allow futher cleanups to be cleaner.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230310164549.22133-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the
value to be returned to user space.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230310164549.22133-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds