As a part of the transition towards callback mechanism for signalling the
events from EPC to EPF, let's use the link_up() callback in the place of
the LINK_UP notifier. This also removes the notifier support completely
from the PCI endpoint framework.
Link: https://lore.kernel.org/linux-pci/20230124071158.5503-6-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Kishon Vijay Abraham I <kishon@kernel.org>
Instead of using the notifiers for passing the events from EPC to EPF,
let's introduce a callback based mechanism where the EPF drivers can
populate relevant callbacks for EPC events they want to subscribe.
The use of notifiers in kernel is not recommended if there is a real link
between the sender and receiver, like in this case. Also, the existing
atomic notifier forces the notification functions to be in atomic context
while the caller may be in non-atomic context. For instance, the two
in-kernel users of the notifiers, pcie-qcom and pcie-tegra194, both are
calling the notifier functions in non-atomic context (from threaded IRQ
handlers). This creates a sleeping in atomic context issue with the
existing EPF_TEST driver that calls the EPC APIs that may sleep.
For all these reasons, let's get rid of the notifier chains and use the
simple callback mechanism for signalling the events from EPC to EPF
drivers. This preserves the context of the caller and avoids the latency
of going through a separate interface for triggering the notifications.
As a first step of the transition, the core_init() callback is introduced
in this commit, that'll replace the existing CORE_INIT notifier used for
signalling the init complete event from EPC.
During the occurrence of the event, EPC will go over the list of EPF
drivers attached to it and will call the core_init() callback if available.
Link: https://lore.kernel.org/linux-pci/20230124071158.5503-5-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Kishon Vijay Abraham I <kishon@kernel.org>
8e4bfbe644 ("PCI: endpoint: pci-epf-vntb: fix error handle in
epf_ntb_mw_bar_init()") added a "num_mws" parameter to
epf_ntb_mw_bar_clear() but failed to add kernel-doc for num_mws.
Add kernel-doc for num_mws on epf_ntb_mw_bar_clear().
Fixes: 8e4bfbe644 ("PCI: endpoint: pci-epf-vntb: fix error handle in epf_ntb_mw_bar_init()")
Link: https://lore.kernel.org/r/20230103024907.293853-1-yangyingliang@huawei.com
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Use epf_db[i] dereference instead of readl() because epf_db is
in memory allocated by dma_alloc_coherent(), not I/O.
Remove useless/duplicated readl() in the process.
Link: https://lore.kernel.org/r/20221102141014.1025893-7-Frank.Li@nxp.com
Signed-off-by: Frank Li <frank.li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
NTB spad entry item size is sizeof(u32), replace hardcoded 4 with it.
Link: https://lore.kernel.org/r/20221102141014.1025893-6-Frank.Li@nxp.com
Signed-off-by: Frank Li <frank.li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
epf_db_phy member in struct epf_ntb is not used, remove it.
Link: https://lore.kernel.org/r/20221102141014.1025893-5-Frank.Li@nxp.com
Signed-off-by: Frank Li <frank.li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Replace pci_epc_mem_free_addr() with pci_epf_free_space() in the
error handle path to match pci_epf_alloc_space().
Link: https://lore.kernel.org/r/20221102141014.1025893-4-Frank.Li@nxp.com
Fixes: e35f56bb03 ("PCI: endpoint: Support NTB transfer between RC and EP")
Signed-off-by: Frank Li <frank.li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cleanup warning found by scripts/kernel-doc.
Consolidate terms:
- host, host1 to HOST
- vhost, vHost, Vhost, VHOST2 to VHOST
Link: https://lore.kernel.org/r/20221102141014.1025893-2-Frank.Li@nxp.com
Signed-off-by: Frank Li <frank.li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Change to follow the Kconfig style guide. This patch fixes to use tab
rather than space to indent, while help text is indented an additional
two spaces.
Link: https://lore.kernel.org/r/20220815025006.48167-1-mie@igel.co.jp
Fixes: e35f56bb03 ("PCI: endpoint: Support NTB transfer between RC and EP")
Signed-off-by: Shunsuke Mie <mie@igel.co.jp>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
The pci_epf_test_notifier function should be installed also if only
core_init_notifier is enabled. Fix the current logic.
Link: https://lore.kernel.org/r/20220825090101.20474-1-hayashi.kunihiko@socionext.com
Fixes: 5e50ee27d4 ("PCI: pci-epf-test: Add support to defer core initialization")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Om Prakash Singh <omp@nvidia.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
and NTB EndPoint Function (EPF) support and the various fixes from that
being in -next for Linux v5.20
-----BEGIN PGP SIGNATURE-----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=DAah
-----END PGP SIGNATURE-----
Merge tag 'ntb-5.20' of https://github.com/jonmason/ntb
Pull NTB updates from Jon Mason:
"Non-Transparent Bridge updates.
Fix of heap data and clang warnings, support for a new Intel NTB
device, and NTB EndPoint Function (EPF) support and the various fixes
for that"
* tag 'ntb-5.20' of https://github.com/jonmason/ntb:
MAINTAINERS: add PCI Endpoint NTB drivers to NTB files
NTB: EPF: Tidy up some bounds checks
NTB: EPF: Fix error code in epf_ntb_bind()
PCI: endpoint: pci-epf-vntb: reduce several globals to statics
PCI: endpoint: pci-epf-vntb: fix error handle in epf_ntb_mw_bar_init()
PCI: endpoint: Fix Kconfig dependency
NTB: EPF: set pointer addr to null using NULL rather than 0
Documentation: PCI: extend subheading underline for "lspci output" section
Documentation: PCI: Use code-block block for scratchpad registers diagram
Documentation: PCI: Add specification for the PCI vNTB function device
PCI: endpoint: Support NTB transfer between RC and EP
NTB: epf: Allow more flexibility in the memory BAR map method
PCI: designware-ep: Allow pci_epc_set_bar() update inbound map address
ntb: intel: add GNR support for Intel PCIe gen5 NTB
NTB: ntb_tool: uninitialized heap data in tool_fn_write()
ntb: idt: fix clang -Wformat warnings
This sscanf() is reading from the filename which was set by the kernel
so it should be trust worthy. Although the data is likely trust worthy
there is some bounds checking but unfortunately, it is not complete or
consistent. Additionally, the Smatch static checker marks everything
that comes from sscanf() as tainted and so Smatch complains that this
code can lead to an out of bounds issue. Let's clean things up and make
Smatch happy.
The first problem is that there is no bounds checking in the _show()
functions. The _store() and _show() functions are very similar so make
the bounds checking the same in both.
The second issue is that if "win_no" is zero it leads to an array
underflow so add an if (win_no <= 0) check for that.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Souptick Joarder (HPE) <jrdr.linux@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Return an error code if pci_register_driver() fails. Don't return
success.
Fixes: da51fd247424 ("NTB: EPF: support NTB transfer between PCI RC and EP connection")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Souptick Joarder (HPE) <jrdr.linux@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
sparse reports
drivers/pci/endpoint/functions/pci-epf-vntb.c:975:5: warning: symbol 'pci_read' was not declared. Should it be static?
drivers/pci/endpoint/functions/pci-epf-vntb.c:984:5: warning: symbol 'pci_write' was not declared. Should it be static?
drivers/pci/endpoint/functions/pci-epf-vntb.c:989:16: warning: symbol 'vpci_ops' was not declared. Should it be static?
These functions and variables are only used in pci-epf-vntb.c, so their storage
class specifiers should be static.
Fixes: ff32fac00d97 ("NTB: EPF: support NTB transfer between PCI RC and EP connection")
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
In error case of epf_ntb_mw_bar_init(), memory window BARs should be
cleared, so add 'num_mws' parameter in epf_ntb_mw_bar_clear() and
calling it in error path to clear the BARs. Also add missing error
code when pci_epc_mem_alloc_addr() fails.
Fixes: ff32fac00d97 ("NTB: EPF: support NTB transfer between PCI RC and EP connection")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
If CONFIG_NTB is not set and CONFIG_PCI_EPF_VNTB is y.
make ARCH=x86_64 CROSS_COMPILE=x86_64-linux-gnu-, will be failed, like this:
drivers/pci/endpoint/functions/pci-epf-vntb.o: In function `epf_ntb_cmd_handler':
pci-epf-vntb.c:(.text+0x95e): undefined reference to `ntb_db_event'
pci-epf-vntb.c:(.text+0xa1f): undefined reference to `ntb_link_event'
pci-epf-vntb.c:(.text+0xa42): undefined reference to `ntb_link_event'
drivers/pci/endpoint/functions/pci-epf-vntb.o: In function `pci_vntb_probe':
pci-epf-vntb.c:(.text+0x1250): undefined reference to `ntb_register_device'
The functions ntb_*() are defined in drivers/ntb/core.c, which need CONFIG_NTB setting y to be build-in.
To fix this build error, add depends on NTB.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: ff32fac00d97("NTB: EPF: support NTB transfer between PCI RC and EP connection")
Signed-off-by: Ren Zhijie <renzhijie2@huawei.com>
Acked-by: Frank Li <frank.li@nxp.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
The pointer addr is being set to null using 0. Use NULL instead.
Cleans up sparse warning:
warning: Using plain integer as NULL pointer
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
- Remove unused struct dw_edma_chip.irq (Frank Li)
- Move eDMA private data from struct dw_edma to struct dw_edma_chip (Frank
Li)
- Convert "struct dw_edma_region rg_region" to "void __iomem *reg_base"
since only the virtual address (not physical address or size) is used
(Frank Li)
- Rename "*_ch_cnt" to "ll_*_cnt" to reflect actual usage (Frank Li)
- Drop dma_slave_config.direction field usage (Serge Semin)
- Fix eDMA Rd/Wr-channels and DMA-direction semantics (Serge Semin)
- Add chip-specific DW_EDMA_CHIP_LOCAL flag to indicate that local eDMA
doesn't require generating MSIs to remote (Frank Li)
- Enable DMA tests for endpoints that support it (Frank Li)
* pci/ctrl/dwc-edma:
PCI: endpoint: Enable DMA tests for endpoints with DMA capabilities
dmaengine: dw-edma: Add support for chip-specific flags
dmaengine: dw-edma: Fix eDMA Rd/Wr-channels and DMA-direction semantics
dmaengine: dw-edma: Drop dma_slave_config.direction field usage
dmaengine: dw-edma: Rename wr(rd)_ch_cnt to ll_wr(rd)_cnt in struct dw_edma_chip
dmaengine: dw-edma: Change rg_region to reg_base in struct dw_edma_chip
dmaengine: dw-edma: Detach the private data and chip info structures
dmaengine: dw-edma: Remove unused irq field in struct dw_edma_chip
Some PCI Endpoint controllers integrate an eDMA (embedded DMA). eDMA can
bypass the outbound memory address translation unit to access all RC memory
space.
Add eDMA support for pci-epf-test.
Depending on HW availability, the EPF test can use either eDMA or general
system DMA controllers to perform DMA. The test tries to use eDMA first and
falls back to general system DMA controllers if there's no eDMA
Separate dma_chan to dma_chan_tx and dma_chan_rx. Search for an eDMA
channel first, then search for a memory-to-memory DMA channel. If general
memory to memory channels are used, dma_chan_rx = dma_chan_tx.
Add dma_addr_t dma_remote in pci_epf_test_data_transfer() because eDMA uses
remote RC physical address directly.
Add enum dma_transfer_direction dir in pci_epf_test_data_transfer() because
eDMA chooses the correct RX/TX channel by dir.
The overall steps are:
1. Execute dma_request_channel() and filter function to find correct eDMA
RX and TX Channel. If a channel does not exist, fallback to try to
allocate general memory to memory DMA channel.
2. Execute dmaengine_slave_config() to configure remote side physical
address.
3. Execute dmaengine_prep_slave_single() to create transfer descriptor.
4. Execute tx_submit().
5. Execute dma_async_issue_pending()
[bhelgaas: squash in fix from Dan Carpenter <dan.carpenter@oracle.com>:
https://lore.kernel.org/r/Ys2GSTnZhuLzzQG5@kili, also previously posted by
Peng Wu <wupeng58@huawei.com>:
https://lore.kernel.org/all/CANXvt5rK98-cEMgpzopY9POOK8a5=VDib8uKPLgJakOG=hRfwQ@mail.gmail.com/]
Link: https://lore.kernel.org/r/20220524152159.2370739-9-Frank.Li@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Unbinding an endpoint function from the endpoint controller shouldn't stop
the controller. This is especially a problem for multi-function endpoints
where other endpoints may still be active.
Don't stop the controller when unbinding one of its endpoints. Normally
the controller is stopped via configfs.
Fixes: 349e7a85b2 ("PCI: endpoint: functions: Add an EP function to test PCI")
Link: https://lore.kernel.org/r/20220622040924.113279-1-mie@igel.co.jp
Signed-off-by: Shunsuke Mie <mie@igel.co.jp>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Fix a number of misspelled words, and while at it, correct two phrases used
to indicate a status of an operation where words used have been cleverly
truncated and thus always trigger a spellchecking error while performing a
static code analysis over the PCI tree.
[bhelgaas: reverse sense of quirk ternary]
Link: https://lore.kernel.org/r/20220107225942.121484-1-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
- Use sysfs_emit() in "show" functions instead of sprintf() to avoid buffer
overruns (Kunihiko Hayashi)
* remotes/lorenzo/pci/endpoint:
PCI: endpoint: Use sysfs_emit() in "show" functions
Convert sprintf() in sysfs "show" functions to sysfs_emit() in order to
check for buffer overruns in sysfs outputs.
Link: https://lore.kernel.org/r/1630472957-26857-1-git-send-email-hayashi.kunihiko@socionext.com
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
Most of the "store" functions that handle userspace input via sysfs return
-EINVAL should the value fail validation and/or type conversion. This
error code is a clear message to userspace that the value is not a valid
input.
However, some of the "show" functions return input parsing error codes
as-is, which may be either -EINVAL or -ERANGE. The former would often be
from kstrtobool(), and the latter typically from other kstr*() functions
such as kstrtou8(), kstrtou32(), kstrtoint(), etc.
-EINVAL is commonly returned as the error code to indicate that the value
provided is invalid, but -ERANGE is not very useful in userspace.
Therefore, normalize the return error code to be -EINVAL for when the
validation and/or type conversion fails.
Link: https://lore.kernel.org/r/20210915230127.2495723-2-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Add virtual function number in pci_epc ops. EPC controller driver
can perform virtual function specific initialization based on the
virtual function number.
Link: https://lore.kernel.org/r/20210819123343.1951-5-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Add the missing destroy_workqueue() before return from
pci_epf_test_init() in the error handling case and add
destroy_workqueue() in pci_epf_test_exit().
Link: https://lore.kernel.org/r/20210331084012.2091010-1-yangyingliang@huawei.com
Fixes: 349e7a85b2 ("PCI: endpoint: functions: Add an EP function to test PCI")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
get_features ops of pci_epc_ops may return NULL, causing NULL pointer
dereference in pci_epf_test_alloc_space function. Let us add a check for
pci_epc_feature pointer in pci_epf_test_bind before we access it to avoid
any such NULL pointer dereference and return -ENOTSUPP in case
pci_epc_feature is not found.
When the patch is not applied and EPC features is not implemented in the
platform driver, we see the following dump due to kernel NULL pointer
dereference.
Call trace:
pci_epf_test_bind+0xf4/0x388
pci_epf_bind+0x3c/0x80
pci_epc_epf_link+0xa8/0xcc
configfs_symlink+0x1a4/0x48c
vfs_symlink+0x104/0x184
do_symlinkat+0x80/0xd4
__arm64_sys_symlinkat+0x1c/0x24
el0_svc_common.constprop.3+0xb8/0x170
el0_svc_handler+0x70/0x88
el0_svc+0x8/0x640
Code: d2800581 b9403ab9 f9404ebb 8b394f60 (f9400400)
---[ end trace a438e3c5a24f9df0 ]---
Link: https://lore.kernel.org/r/20210324101609.79278-1-shradha.t@samsung.com
Fixes: 2c04c5b8ee ("PCI: pci-epf-test: Use pci_epc_get_features() to get EPC features")
Signed-off-by: Sriram Dash <dash.sriram@gmail.com>
Signed-off-by: Shradha Todi <shradha.t@samsung.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
Add a new endpoint function driver to provide NTB functionality using
multiple PCIe endpoint instances.
[arnd@arndb.de: Select configfs dependency]
[yebin10@huawei.com: Fix unused but set variables]
[geert+renesas@glider.be: Explain NTB in PCI_EPF_NTB help text]
Link: https://lore.kernel.org/r/20210201195809.7342-14-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
In the case of standard endpoint functions, only one endpoint controller
(EPC) will be associated with an endpoint function (EPF). However for
providing NTB (non transparent bridge) functionality, two EPCs should be
associated with a single EPF. Add support to associate secondary EPC with
EPF. This is in preparation for adding NTB endpoint function driver.
Link: https://lore.kernel.org/r/20210201195809.7342-7-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Modify pci_epc_get_next_free_bar() and pci_epc_get_first_free_bar() to
return error values if there are no free BARs available.
Link: https://lore.kernel.org/r/20210201195809.7342-5-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
When unbinding pci_epf_test, pci_epf_test_clean_dma_chan() is called in
pci_epf_test_unbind() even though epf_test->dma_supported is false.
As a result, dma_release_channel() will trigger a NULL pointer
dereference because dma_chan is not set.
Avoid calling dma_release_channel() if epf_test->dma_supported
is false.
Link: https://lore.kernel.org/r/1587540287-10458-1-git-send-email-hayashi.kunihiko@socionext.com
Fixes: 5ebf3fc59b ("PCI: endpoint: functions/pci-epf-test: Add DMA support to transfer data")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
[lorenzo.pieralisi@arm.com: commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
commit 8963106eab ("PCI: endpoint: Add MSI-X interfaces") while
adding support to raise MSI-X interrupts from endpoint didn't include
BAR Indicator register (BIR) configuration and MSI-X table offset as
arguments in pci_epc_set_msix(). This would result in endpoint
controller register using random BAR indicator register, the memory
for which might not be allocated by the endpoint function driver.
Add BAR indicator register and MSI-X table offset as arguments in
pci_epc_set_msix() and allocate space for MSI-X table and pending
bit array (PBA) in pci-epf-test endpoint function driver.
Fixes: 8963106eab ("PCI: endpoint: Add MSI-X interfaces")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Print throughput information in KB/s after every completed transfer,
including information on whether DMA is used or not.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Alan Mikhak <alan.mikhak@sifive.com>
Use dmaengine API and add support for transferring data using DMA.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Alan Mikhak <alan.mikhak@sifive.com>
Add support to defer core initialization for the endpoint mode of
operation.
This would enable support for implementations where the core
initialization needs to be deferred until the PCIe reference clock is
available from the host system.
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
[lorenzo.pieralisi@arm.com: commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Use atomic_notifier_call_chain() to notify EPC events like linkup to EPF
driver instead of using linkup ops in EPF driver. This is in preparation
for adding proper locking mechanism to EPF ops. This will also enable to
add more events (in addition to linkup) in the future.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Vidya Sagar <vidyas@nvidia.com>
Code that iterates over all standard PCI BARs typically uses
PCI_STD_RESOURCE_END. However, that requires the unusual test
"i <= PCI_STD_RESOURCE_END" rather than something the typical
"i < PCI_STD_NUM_BARS".
Add a definition for PCI_STD_NUM_BARS and change loops to use the more
idiomatic C style to help avoid fencepost errors.
Link: https://lore.kernel.org/r/20190927234026.23342-1-efremov@linux.com
Link: https://lore.kernel.org/r/20190927234308.23935-1-efremov@linux.com
Link: https://lore.kernel.org/r/20190916204158.6889-3-efremov@linux.com
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Sebastian Ott <sebott@linux.ibm.com> # arch/s390/
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> # video/fbdev/
Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> # pci/controller/dwc/
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> # scsi/pm8001/
Acked-by: Martin K. Petersen <martin.petersen@oracle.com> # scsi/pm8001/
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # memstick/
Associated pci_epf_bar structure is needed in pci_epc_clear_bar() to
clear a BAR correctly but it is reset in pci_epf_free_space() (that
is called first) which results in pci_epc_clear_bar() failure.
Reorder the pci_epc_clear_bar()/pci_epf_free_space() calls execution
to fix the issue.
Signed-off-by: Alan Mikhak <alan.mikhak@sifive.com>
[lorenzo.pieralisi@arm.com: reworded the commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Always skip odd BAR when skipping 64bit BARs in pci_epf_test_set_bar()
and pci_epf_test_alloc_space() otherwise pci_epf_test_set_bar() will
call pci_epc_set_bar() on an odd loop index when skipping reserved 64bit
BAR.
Moreover, pci_epf_test_alloc_space() will call pci_epf_alloc_space() on
bind for an odd loop index when BAR is 64bit but leaks on subsequent
unbind by not calling pci_epf_free_space().
Signed-off-by: Alan Mikhak <alan.mikhak@sifive.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Paul Walmsley <paul.walmsley@sifive.com>
PCI endpoint test function code should honor the .bar_fixed_size parameter
from underlying endpoint controller drivers or results may be unexpected.
In pci_epf_test_alloc_space(), check if BAR being used for test
register space is a fixed size BAR. If so, allocate the required fixed
size.
Signed-off-by: Alan Mikhak <alan.mikhak@sifive.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Bjorn Helgaas