No core changes.
New drivers:
- NXP (ex Freescale) i.MX 8QM driver.
- NXP (ex Freescale) i.MX 8MM driver.
- AT91 SAM9X60 subdriver.
Improvements:
- Support for external interrups (EINT) on Mediatek virtual GPIOs.
- Make BCM2835 pin config fully generic.
- Lots of Renesas SH-PFC incremental improvements.
-----BEGIN PGP SIGNATURE-----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=EfXK
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"This is a calm cycle, not much happened this time around: not even
much incremental development. Some three new drivers, that is all.
No core changes.
New drivers:
- NXP (ex Freescale) i.MX 8QM driver.
- NXP (ex Freescale) i.MX 8MM driver.
- AT91 SAM9X60 subdriver.
Improvements:
- Support for external interrups (EINT) on Mediatek virtual GPIOs.
- Make BCM2835 pin config fully generic.
- Lots of Renesas SH-PFC incremental improvements"
* tag 'pinctrl-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (70 commits)
pinctrl: imx: fix scu link errors
dt-bindings: pinctrl: Document the i.MX50 IOMUXC binding
pinctrl: qcom: spmi-gpio: Reorder debug print
pinctrl: nomadik: fix possible object reference leak
pinctrl: stm32: return error upon hwspinlock failure
pinctrl: stm32: fix memory leak issue
pinctrl: sh-pfc: r8a77965: Add DRIF pins, groups and functions
pinctrl: sh-pfc: r8a77965: Add TMU pins, groups and functions
pinctrl: sh-pfc: Validate fixed-size field widths at build time
pinctrl: sh-pfc: sh73a0: Fix fsic_spdif pin groups
pinctrl: sh-pfc: r8a7792: Fix vin1_data18_b pin group
pinctrl: sh-pfc: r8a7791: Fix scifb2_data_c pin group
pinctrl: sh-pfc: emev2: Add missing pinmux functions
pinctrl: sunxi: Support I/O bias voltage setting on A80
pinctrl: ingenic: Add LCD pins for the JZ4725B SoC
pinctrl: samsung: Remove legacy API for handling external wakeup interrupts mask
pinctrl: bcm2835: Direct GPIO config changes to generic pinctrl
pinctrl: bcm2835: declare pin config as generic
pinctrl: qcom: qcs404: Drop unused UFS_RESET macro
dt-bindings: add documentation for slew rate
...
-----BEGIN PGP SIGNATURE-----
iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAlyCpL0UHGJoZWxnYWFz
QGdvb2dsZS5jb20ACgkQWYigwDrT+vzoHw//ZyFbwekF0mV3RZwcV35LkScIOw0d
O1DgjJo8UbuV51+/foQeUZ8IzjHlybQhoFdJupPuw+LyaDUkwqjAmdtY8J/FjWSm
AJeVzu6gMF0Z9kwwGO4NyqX2EWluTD0xNLgf8g+fe3p1MtEuH6VCrqe+hk3wma0K
CrSIKWY/sO408SpAaWiLTEZmVT+hXiP9hJw1qTrbqKLtyWa4oCjErdoyUDsA01+5
gPndKC/3pu6q6q9Dd94582HuQaE2dKHWQXx6Fzd/tdCyYffpbOUAUNP3aRXaTKrS
MwKxOF3y7yUnz5RbxRgopwNVf5WyXhCnnPZRLaSxqnTSZCY6FCUi3l6RpVyWu2Ha
iztBbkTP/x6WV3VWg810qgQKQ9wl8oALMkoOfR6lWCR7MTuJnMXJtbrz0jWpEC2O
ZPwK9fAxFj2/3e13hx88O7Ek8kfajTPM8T15K79pvpljfqa0BD9SrhPyQ5ssmxj4
idz4yIFCATULKszPXA1QbfC1/xCDveQOEPSerL3eACXsLN17vfpOwOT9vWJm6bpr
6u5ggM2dEA07eI1ANnY6twn5g0kSYU9qISNQO98tA86IvaCnME0Z+k+SCwUNIM9U
ep9k0NdAGDNsYOfdVEEY0fYGT9k+9f9w8AfZLNvh0N3s7mGQQ35jf0Z75jj/jsor
cbMcPAN2jOCyFVs=
=vf9L
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
- Use match_string() instead of reimplementing it (Andy Shevchenko)
- Enable SERR# forwarding for all bridges (Bharat Kumar Gogada)
- Use Latency Tolerance Reporting if already enabled by platform (Bjorn
Helgaas)
- Save/restore LTR info for suspend/resume (Bjorn Helgaas)
- Fix DPC use of uninitialized data (Dongdong Liu)
- Probe bridge window attributes only once at enumeration-time to fix
device accesses during rescan (Bjorn Helgaas)
- Return BAR size (not "size -1 ") from pci_size() to simplify code (Du
Changbin)
- Use config header type (not class code) identify bridges more
reliably (Honghui Zhang)
- Work around Intel Denverton incorrect Trace Hub BAR size reporting
(Alexander Shishkin)
- Reorder pciehp cached state/hardware state updates to avoid missed
interrupts (Mika Westerberg)
- Turn ibmphp semaphores into completions or mutexes (Arnd Bergmann)
- Mark expected switch fall-through (Mathieu Malaterre)
- Use of_node_name_eq() for node name comparisons (Rob Herring)
- Add ACS and pciehp quirks for HXT SD4800 (Shunyong Yang)
- Consolidate Rohm Vendor ID definitions (Andy Shevchenko)
- Use u32 (not __u32) for things not exposed to userspace (Logan
Gunthorpe)
- Fix locking semantics of bus and slot reset interfaces (Alex
Williamson)
- Update PCIEPORTBUS Kconfig help text (Hou Zhiqiang)
- Allow portdrv to claim subtractive decode Ports so PCIe services will
work for them (Honghui Zhang)
- Report PCIe links that become degraded at run-time (Alexandru
Gagniuc)
- Blacklist Gigabyte X299 Root Port power management to fix Thunderbolt
hotplug (Mika Westerberg)
- Revert runtime PM suspend/resume callbacks that broke PME on network
cable plug (Mika Westerberg)
- Disable Data Link State Changed interrupts to prevent wakeup
immediately after suspend (Mika Westerberg)
- Extend altera to support Stratix 10 (Ley Foon Tan)
- Allow building altera driver on ARM64 (Ley Foon Tan)
- Replace Douglas with Tom Joseph as Cadence PCI host/endpoint
maintainer (Lorenzo Pieralisi)
- Add DT support for R-Car RZ/G2E (R8A774C0) (Fabrizio Castro)
- Add dra72x/dra74x/dra76x SoC compatible strings (Kishon Vijay Abraham I)
- Enable x2 mode support for dra72x/dra74x/dra76x SoC (Kishon Vijay
Abraham I)
- Configure dra7xx PHY to PCIe mode (Kishon Vijay Abraham I)
- Simplify dwc (remove unnecessary header includes, name variables
consistently, reduce inverted logic, etc) (Gustavo Pimentel)
- Add i.MX8MQ support (Andrey Smirnov)
- Add message to help debug dwc MSI-X mask bit errors (Gustavo
Pimentel)
- Work around imx7d PCIe PLL erratum (Trent Piepho)
- Don't assert qcom reset GPIO during probe (Bjorn Andersson)
- Skip dwc MSI init if MSIs have been disabled (Lucas Stach)
- Use memcpy_fromio()/memcpy_toio() instead of plain memcpy() in PCI
endpoint framework (Wen Yang)
- Add interface to discover supported endpoint features to replace a
bitfield that wasn't flexible enough (Kishon Vijay Abraham I)
- Implement the new supported-feature interface for designware-plat,
dra7xx, rockchip, cadence (Kishon Vijay Abraham I)
- Fix issues with 64-bit BAR in endpoints (Kishon Vijay Abraham I)
- Add layerscape endpoint mode support (Xiaowei Bao)
- Remove duplicate struct hv_vp_set in favor of struct hv_vpset (Maya
Nakamura)
- Rework hv_irq_unmask() to use cpumask_to_vpset() instead of
open-coded reimplementation (Maya Nakamura)
- Align Hyper-V struct retarget_msi_interrupt arguments (Maya Nakamura)
- Fix mediatek MMIO size computation to enable full size of available
MMIO space (Honghui Zhang)
- Fix mediatek DMA window size computation to allow endpoint DMA access
to full DRAM address range (Honghui Zhang)
- Fix mvebu prefetchable BAR regression caused by common bridge
emulation that assumed all bridges had prefetchable windows (Thomas
Petazzoni)
- Make advk_pci_bridge_emul_ops static (Wei Yongjun)
- Configure MPS settings for VMD root ports (Jon Derrick)
* tag 'pci-v5.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (92 commits)
PCI: Update PCIEPORTBUS Kconfig help text
PCI: Fix "try" semantics of bus and slot reset
PCI/LINK: Report degraded links via link bandwidth notification
dt-bindings: PCI: altera: Add altr,pcie-root-port-2.0
PCI: altera: Enable driver on ARM64
PCI: altera: Add Stratix 10 PCIe support
PCI/PME: Fix possible use-after-free on remove
PCI: aardvark: Make symbol 'advk_pci_bridge_emul_ops' static
PCI: dwc: skip MSI init if MSIs have been explicitly disabled
PCI: hv: Refactor hv_irq_unmask() to use cpumask_to_vpset()
PCI: hv: Replace hv_vp_set with hv_vpset
PCI: hv: Add __aligned(8) to struct retarget_msi_interrupt
PCI: mediatek: Enlarge PCIe2AHB window size to support 4GB DRAM
PCI: mediatek: Fix memory mapped IO range size computation
PCI: dwc: Remove superfluous shifting in definitions
PCI: dwc: Make use of GENMASK/FIELD_PREP
PCI: dwc: Make use of BIT() in constant definitions
PCI: dwc: Share code for dw_pcie_rd/wr_other_conf()
PCI: dwc: Make use of IS_ALIGNED()
PCI: imx6: Add code to request/control "pcie_aux" clock for i.MX8MQ
...
Core changes:
- The big change this time around is the irqchip handling in
the qualcomm pin controllers, closely coupled with the
gpiochip. This rework, in a classic fall-between-the-chairs
fashion has been sidestepped for too long. The Qualcomm
IRQchips using the SPMI and SSBI transport mechanisms have
been rewritten to use hierarchical irqchip. This creates
the base from which I intend to gradually pull support for
hierarchical irqchips into the gpiolib irqchip helpers to
cut down on duplicate code. We have too many hacks in the
kernel because people have been working around the missing
hierarchical irqchip for years, and once it was there,
noone understood it for a while. We are now slowly adapting
to using it. This is why this pull requests include changes
to MFD, SPMI, IRQchip core and some ARM Device Trees
pertaining to the Qualcomm chip family. Since Qualcomm have
so many chips and such large deployments it is paramount
that this platform gets this right, and now it (hopefully)
does.
- Core support for pull-up and pull-down configuration, also
from the device tree. When a simple GPIO chip support a
"off or on" pull-up or pull-down resistor, we provide a
way to set this up using machine descriptors or device tree.
If more elaborate control of pull up/down (such as
resistance shunt setting) is required, drivers should be
phased over to use pin control. We do not yet provide a
userspace ABI for this pull up-down setting but I suspect
the makers are going to ask for it soon enough. PCA953x
is the first user of this new API.
- The GPIO mockup driver has been revamped after some
discussion improving the IRQ simulator in the process.
The idea is to make it possible to use the mockup for
both testing and virtual prototyping, e.g. when you do
not yet have a GPIO expander to play with but really
want to get something to develop code around before
hardware is available. It's neat. The blackbox testing
usecase is currently making its way into kernelci.
- ACPI GPIO core preserves non direction flags when updating
flags.
- A new device core helper for devm_platform_ioremap_resource()
is funneled through the GPIO tree with Greg's ACK.
New drivers:
- TQ-Systems QTMX86 GPIO controllers (using port-mapped
I/O)
- Gateworks PLD GPIO driver (vaccumed up from OpenWrt)
- AMD G-Series PCH (Platform Controller Hub) GPIO driver.
- Fintek F81804 & F81966 subvariants.
- PCA953x now supports NXP PCAL6416.
Driver improvements:
- IRQ support on the Nintendo Wii (Hollywood) GPIO.
- get_direction() support for the MVEBU driver.
- Set the right output level on SAMA5D2.
- Drop the unused irq trigger setting on the Spreadtrum
driver.
- Wakeup support for PCA953x.
- A slew of cleanups in the various Intel drivers.
-----BEGIN PGP SIGNATURE-----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=VoVC
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for the v5.1 cycle:
Core changes:
- The big change this time around is the irqchip handling in the
qualcomm pin controllers, closely coupled with the gpiochip. This
rework, in a classic fall-between-the-chairs fashion has been
sidestepped for too long.
The Qualcomm IRQchips using the SPMI and SSBI transport mechanisms
have been rewritten to use hierarchical irqchip. This creates the
base from which I intend to gradually pull support for hierarchical
irqchips into the gpiolib irqchip helpers to cut down on duplicate
code.
We have too many hacks in the kernel because people have been
working around the missing hierarchical irqchip for years, and once
it was there, noone understood it for a while. We are now slowly
adapting to using it.
This is why this pull requests include changes to MFD, SPMI,
IRQchip core and some ARM Device Trees pertaining to the Qualcomm
chip family. Since Qualcomm have so many chips and such large
deployments it is paramount that this platform gets this right, and
now it (hopefully) does.
- Core support for pull-up and pull-down configuration, also from the
device tree. When a simple GPIO chip supports an "off or on" pull-up
or pull-down resistor, we provide a way to set this up using
machine descriptors or device tree.
If more elaborate control of pull up/down (such as resistance shunt
setting) is required, drivers should be phased over to use pin
control. We do not yet provide a userspace ABI for this pull
up-down setting but I suspect the makers are going to ask for it
soon enough. PCA953x is the first user of this new API.
- The GPIO mockup driver has been revamped after some discussion
improving the IRQ simulator in the process.
The idea is to make it possible to use the mockup for both testing
and virtual prototyping, e.g. when you do not yet have a GPIO
expander to play with but really want to get something to develop
code around before hardware is available. It's neat. The blackbox
testing usecase is currently making its way into kernelci.
- ACPI GPIO core preserves non direction flags when updating flags.
- A new device core helper for devm_platform_ioremap_resource() is
funneled through the GPIO tree with Greg's ACK.
New drivers:
- TQ-Systems QTMX86 GPIO controllers (using port-mapped I/O)
- Gateworks PLD GPIO driver (vaccumed up from OpenWrt)
- AMD G-Series PCH (Platform Controller Hub) GPIO driver.
- Fintek F81804 & F81966 subvariants.
- PCA953x now supports NXP PCAL6416.
Driver improvements:
- IRQ support on the Nintendo Wii (Hollywood) GPIO.
- get_direction() support for the MVEBU driver.
- Set the right output level on SAMA5D2.
- Drop the unused irq trigger setting on the Spreadtrum driver.
- Wakeup support for PCA953x.
- A slew of cleanups in the various Intel drivers"
* tag 'gpio-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (110 commits)
gpio: gpio-omap: fix level interrupt idling
gpio: amd-fch: Set proper output level for direction_output
x86: apuv2: remove unused variable
gpio: pca953x: Use PCA_LATCH_INT
platform/x86: fix PCENGINES_APU2 Kconfig warning
gpio: pca953x: Fix dereference of irq data in shutdown
gpio: amd-fch: Fix type error found by sparse
gpio: amd-fch: Drop const from resource
gpio: mxc: add check to return defer probe if clock tree NOT ready
gpio: ftgpio: Register per-instance irqchip
gpio: ixp4xx: Add DT bindings
x86: pcengines apuv2 gpio/leds/keys platform driver
gpio: AMD G-Series PCH gpio driver
drivers: depend on HAS_IOMEM for devm_platform_ioremap_resource()
gpio: tqmx86: Set proper output level for direction_output
gpio: sprd: Change to use SoC compatible string
gpio: sprd: Use SoC compatible string instead of wildcard string
gpio: of: Handle both enable-gpio{,s}
gpio: of: Restrict enable-gpio quirk to regulator-gpio
gpio: davinci: use devm_platform_ioremap_resource()
...
We had again a busy development cycle with many new drivers as well as
lots of core improvements / cleanups. Let's go for highlights:
ALSA core:
- PCM locking scheme was refactored for reducing a global rwlock
- PCM suspend is handled in the device type PM ops now; lots of
explicit calls were reduced by this action
- Cleanups about PCM buffer preallocation calls
- Kill NULL device object in memory allocations
- Lots of procfs API cleanups
ASoC core:
- Support for only powering up channels that are actively being used
- Cleanups / fixes of topology API
ASoC drivers:
- MediaTek BTCVSD for a Bluetooth radio chip, which is the first such
driver we've had upstream!
- Quite a few improvements to simplify the generic card drivers,
especially the merge of the SCU cards into the main generic drivers
- Lots of fixes for probing on Intel systems to follow more standard
styles
- A big refresh and cleanup of the Samsung drivers
- New drivers: Asahi Kasei Microdevices AK4497, Cirrus Logic CS4341
and CS35L26, Google ChromeOS embedded controllers, Ingenic JZ4725B,
MediaTek BTCVSD, MT8183 and MT6358, NXP MICFIL, Rockchip RK3328,
Spreadtrum DMA controllers, Qualcomm WCD9335, Xilinx S/PDIF and PCM
formatters
ALSA drivers:
- Improvements of Tegra HD-audio controller driver for supporting new
chips
- HD-audio codec quirks for ALC294 S4 resume, ASUS laptop, Chrome
headset button support and Dell workstations
- Improved DSD support on USB-audio
- Quirk for MOTU MicroBook II USB-audio
- Support for Fireface UCX support and Solid State Logic Duende
Classic/Mini
-----BEGIN PGP SIGNATURE-----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=Vh8O
-----END PGP SIGNATURE-----
Merge tag 'sound-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"We had again a busy development cycle with many new drivers as well as
lots of core improvements / cleanups. Let's go for highlights:
ALSA core:
- PCM locking scheme was refactored for reducing a global rwlock
- PCM suspend is handled in the device type PM ops now; lots of
explicit calls were reduced by this action
- Cleanups about PCM buffer preallocation calls
- Kill NULL device object in memory allocations
- Lots of procfs API cleanups
ASoC core:
- Support for only powering up channels that are actively being used
- Cleanups / fixes of topology API
ASoC drivers:
- MediaTek BTCVSD for a Bluetooth radio chip, which is the first such
driver we've had upstream!
- Quite a few improvements to simplify the generic card drivers,
especially the merge of the SCU cards into the main generic drivers
- Lots of fixes for probing on Intel systems to follow more standard
styles
- A big refresh and cleanup of the Samsung drivers
- New drivers: Asahi Kasei Microdevices AK4497, Cirrus Logic CS4341
and CS35L26, Google ChromeOS embedded controllers, Ingenic JZ4725B,
MediaTek BTCVSD, MT8183 and MT6358, NXP MICFIL, Rockchip RK3328,
Spreadtrum DMA controllers, Qualcomm WCD9335, Xilinx S/PDIF and PCM
formatters
ALSA drivers:
- Improvements of Tegra HD-audio controller driver for supporting new
chips
- HD-audio codec quirks for ALC294 S4 resume, ASUS laptop, Chrome
headset button support and Dell workstations
- Improved DSD support on USB-audio
- Quirk for MOTU MicroBook II USB-audio
- Support for Fireface UCX support and Solid State Logic Duende
Classic/Mini"
* tag 'sound-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (461 commits)
ALSA: usb-audio: Add quirk for MOTU MicroBook II
ASoC: stm32: i2s: skip useless write in slave mode
ASoC: stm32: i2s: fix race condition in irq handler
ASoC: stm32: i2s: remove useless callback
ASoC: stm32: i2s: fix dma configuration
ASoC: stm32: i2s: fix stream count management
ASoC: stm32: i2s: fix 16 bit format support
ASoC: stm32: i2s: fix IRQ clearing
ASoC: qcom: Kconfig: fix dependency for sdm845
ASoC: Intel: Boards: Add Maxim98373 support
ASoC: rsnd: gen: fix SSI9 4/5/6/7 busif related register address
ALSA: firewire-motu: fix construction of PCM frame for capture direction
ALSA: bebob: use more identical mod_alias for Saffire Pro 10 I/O against Liquid Saffire 56
ALSA: hda: Extend i915 component bind timeout
ASoC: wm_adsp: Improve logging messages
ASoC: wm_adsp: Add support for multiple compressed buffers
ASoC: wm_adsp: Refactor compress stream initialisation
ASoC: wm_adsp: Reorder some functions for improved clarity
ASoC: wm_adsp: Factor out stripping padding from ADSP data
ASoC: cs35l36: Fix an IS_ERR() vs NULL checking bug
...
Two new SoC families are added this time.
Sugaya Taichi submitted support for the Milbeaut SoC family from
Socionext and explains:
"SC2000 is a SoC of the Milbeaut series. equipped with a DSP optimized for
computer vision. It also features advanced functionalities such as 360-degree,
real-time spherical stitching with multi cameras, image stabilization for
without mechanical gimbals, and rolling shutter correction. More detail is
below:
https://www.socionext.com/en/products/assp/milbeaut/SC2000.html"
Interestingly, this one has a history dating back to older chips
made by Socionext and previously Matsushita/Panasonic based on their
own mn10300 CPU architecture that was removed from the kernel last year.
Manivannan Sadhasivam adds support for another SoC family, this is the
Bitmain BM1880 chip used in the Sophon Edge TPU developer board.
The chip is intended for Deep Learning applications, and comes
with dual-core Arm Cortex-A53 to run Linux as well as a RISC-V
microcontroller core to control the tensor unit.
For the moment, the TPU is not accessible in mainline Linux, so
we treat it as a generic Arm SoC.
More information is available at https://www.sophon.ai/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=HQS8
-----END PGP SIGNATURE-----
Merge tag 'armsoc-newsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM new SoC family support from Arnd Bergmann:
"Two new SoC families are added this time.
Sugaya Taichi submitted support for the Milbeaut SoC family from
Socionext and explains:
"SC2000 is a SoC of the Milbeaut series. equipped with a DSP
optimized for computer vision. It also features advanced
functionalities such as 360-degree, real-time spherical stitching
with multi cameras, image stabilization for without mechanical
gimbals, and rolling shutter correction. More detail is below:
https://www.socionext.com/en/products/assp/milbeaut/SC2000.html"
Interestingly, this one has a history dating back to older chips made
by Socionext and previously Matsushita/Panasonic based on their own
mn10300 CPU architecture that was removed from the kernel last year.
Manivannan Sadhasivam adds support for another SoC family, this is the
Bitmain BM1880 chip used in the Sophon Edge TPU developer board.
The chip is intended for Deep Learning applications, and comes with
dual-core Arm Cortex-A53 to run Linux as well as a RISC-V
microcontroller core to control the tensor unit. For the moment, the
TPU is not accessible in mainline Linux, so we treat it as a generic
Arm SoC.
More information is available at
https://www.sophon.ai/"
* tag 'armsoc-newsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: multi_v7_defconfig: add ARCH_MILBEAUT and ARCH_MILBEAUT_M10V
ARM: configs: Add Milbeaut M10V defconfig
ARM: dts: milbeaut: Add device tree set for the Milbeaut M10V board
clocksource/drivers/timer-milbeaut: Introduce timer for Milbeaut SoCs
dt-bindings: timer: Add Milbeaut M10V timer description
ARM: milbeaut: Add basic support for Milbeaut m10v SoC
dt-bindings: Add documentation for Milbeaut SoCs
dt-bindings: arm: Add SMP enable-method for Milbeaut
dt-bindings: sram: milbeaut: Add binding for Milbeaut smp-sram
MAINTAINERS: Add entry for Bitmain SoC platform
arm64: dts: bitmain: Add Sophon Egde board support
arm64: dts: bitmain: Add BM1880 SoC support
arm64: Add ARCH_BITMAIN platform
dt-bindings: arm: Document Bitmain BM1880 SoC
This is a smaller update than the past few times, but with just over
500 non-merge changesets still dwarfes the rest of the SoC tree.
Three new SoC platforms get added, each one a follow-up to an existing
product, and added here in combination with a reference platform:
- Renesas RZ/A2M (R7S9210) 32-bit Cortex-A9 Real-time imaging processor
https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rza/rza2m.html
- Renesas RZ/G2E (r8a774c0) 64-bit Cortex-A53 SoC "for
Rich Graphics Applications".
https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rzg/rzg2e.html
- NXP i.MX8QuadXPlus 64-bit Cortex-A35 SoC
https://www.nxp.com/products/processors-and-microcontrollers/arm-based-processors-and-mcus/i.mx-applications-processors/i.mx-8-processors/i.mx-8x-family-arm-cortex-a35-3d-graphics-4k-video-dsp-error-correcting-code-on-ddr:i.MX8X
These are actual commercial products we now support with an in-kernel
device tree source file:
- Bosch Guardian is a product made by Bosch Power
Tools GmbH, based on the Texas Instruments AM335x chip
- Winterland IceBoard is a Texas Instruments AM3874 based
machine used in telescopes at the south pole and elsewhere, see commit
d031773169 for some pointers:
- Inspur on5263m5 is an x86 server platform with an Aspeed
ast2500 baseboard management controller. This is for running on
the BMC.
- Zodiac Digital Tapping Unit, apparently a kind of ethernet
switch used in airplanes.
- Phicomm K3 is a WiFi router based on Broadcom bcm47094
- Methode Electronics uDPU FTTdp distribution point unit
- X96 Max, a generic TV box based on Amlogic G12a (S905X2)
- NVIDIA Shield TV (Darcy) based on Tegra210
And then there are several new SBC, evaluation, development or modular
systems that we add:
- Three new Rockchips rk3399 based boards:
- FriendlyElec NanoPC-T4 and NanoPi M4
- Radxa ROCK Pi 4
- Five new i.MX6 family SoM modules and boards for industrial
products:
- Logic PD i.MX6QD SoM and evaluation baseboad
- Y Soft IOTA Draco/Hydra/Ursa family boards based on i.MX6DL
- Phytec phyCORE i.MX6 UltraLite SoM and evaluation module
- MYIR Tech MYD-LPC4357 development based on the NXP lpc4357
microcontroller
- Chameleon96, an Intel/Altera Cyclone5 based FPGA development
system in 96boards form factor
- Arm Fixed Virtual Platforms(FVP) Base RevC, a purely
virtual platform for corresponding to the latest "fast model"
- Another Raspberry Pi variant: Model 3 A+, supported both
in 32-bit and 64-bit mode.
- Oxalis Evalkit V100 based on NXP Layerscape LS1012a,
in 96Boards enterprise form factor
- Elgin RV1108 R1 development board based on 32-bit Rockchips RV1108
For already supported boards and SoCs, we often add support for new
devices after merging the drivers. This time, the largest changes include
updates for
- STMicroelectronics stm32mp1, which was now formally
launched last week
- Qualcomm Snapdragon 845, a high-end phone and low-end laptop chip
- Action Semi S700
- TI AM654x, their recently merged 64-bit SoC from the OMAP family
- Various Amlogic Meson SoCs
- Mediatek MT2712
- NVIDIA Tegra186 and Tegra210
- The ancient NXP lpc32xx family
- Samsung s5pv210, used in some older mobile phones
Many other chips see smaller updates and bugfixes beyond that.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=1goV
-----END PGP SIGNATURE-----
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC device tree updates from Arnd Bergmann:
"This is a smaller update than the past few times, but with just over
500 non-merge changesets still dwarfes the rest of the SoC tree.
Three new SoC platforms get added, each one a follow-up to an existing
product, and added here in combination with a reference platform:
- Renesas RZ/A2M (R7S9210) 32-bit Cortex-A9 Real-time imaging
processor:
https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rza/rza2m.html
- Renesas RZ/G2E (r8a774c0) 64-bit Cortex-A53 SoC "for Rich Graphics
Applications":
https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rzg/rzg2e.html
- NXP i.MX8QuadXPlus 64-bit Cortex-A35 SoC:
https://www.nxp.com/products/processors-and-microcontrollers/arm-based-processors-and-mcus/i.mx-applications-processors/i.mx-8-processors/i.mx-8x-family-arm-cortex-a35-3d-graphics-4k-video-dsp-error-correcting-code-on-ddr:i.MX8X
These are actual commercial products we now support with an in-kernel
device tree source file:
- Bosch Guardian is a product made by Bosch Power Tools GmbH, based
on the Texas Instruments AM335x chip
- Winterland IceBoard is a Texas Instruments AM3874 based machine
used in telescopes at the south pole and elsewhere, see commit
d031773169 for some pointers:
- Inspur on5263m5 is an x86 server platform with an Aspeed ast2500
baseboard management controller. This is for running on the BMC.
- Zodiac Digital Tapping Unit, apparently a kind of ethernet switch
used in airplanes.
- Phicomm K3 is a WiFi router based on Broadcom bcm47094
- Methode Electronics uDPU FTTdp distribution point unit
- X96 Max, a generic TV box based on Amlogic G12a (S905X2)
- NVIDIA Shield TV (Darcy) based on Tegra210
And then there are several new SBC, evaluation, development or modular
systems that we add:
- Three new Rockchips rk3399 based boards:
- FriendlyElec NanoPC-T4 and NanoPi M4
- Radxa ROCK Pi 4
- Five new i.MX6 family SoM modules and boards for industrial
products:
- Logic PD i.MX6QD SoM and evaluation baseboad
- Y Soft IOTA Draco/Hydra/Ursa family boards based on i.MX6DL
- Phytec phyCORE i.MX6 UltraLite SoM and evaluation module
- MYIR Tech MYD-LPC4357 development based on the NXP lpc4357
microcontroller
- Chameleon96, an Intel/Altera Cyclone5 based FPGA development system
in 96boards form factor
- Arm Fixed Virtual Platforms(FVP) Base RevC, a purely virtual
platform for corresponding to the latest "fast model"
- Another Raspberry Pi variant: Model 3 A+, supported both in 32-bit
and 64-bit mode.
- Oxalis Evalkit V100 based on NXP Layerscape LS1012a, in 96Boards
enterprise form factor
- Elgin RV1108 R1 development board based on 32-bit Rockchips RV1108
For already supported boards and SoCs, we often add support for new
devices after merging the drivers. This time, the largest changes
include updates for
- STMicroelectronics stm32mp1, which was now formally launched last
week
- Qualcomm Snapdragon 845, a high-end phone and low-end laptop chip
- Action Semi S700
- TI AM654x, their recently merged 64-bit SoC from the OMAP family
- Various Amlogic Meson SoCs
- Mediatek MT2712
- NVIDIA Tegra186 and Tegra210
- The ancient NXP lpc32xx family
- Samsung s5pv210, used in some older mobile phones
Many other chips see smaller updates and bugfixes beyond that"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (506 commits)
ARM: dts: exynos: Fix max voltage for buck8 regulator on Odroid XU3/XU4
dt-bindings: net: ti: deprecate cpsw-phy-sel bindings
ARM: dts: am335x: switch to use phy-gmii-sel
ARM: dts: am4372: switch to use phy-gmii-sel
ARM: dts: dm814x: switch to use phy-gmii-sel
ARM: dts: dra7: switch to use phy-gmii-sel
arch: arm: dts: kirkwood-rd88f6281: Remove disabled marvell,dsa reference
ARM: dts: exynos: Add support for secondary DAI to Odroid XU4
ARM: dts: exynos: Add support for secondary DAI to Odroid XU3
ARM: dts: exynos: Disable ARM PMU on Odroid XU3-lite
ARM: dts: exynos: Add stdout path property to Arndale board
ARM: dts: exynos: Add minimal clkout parameters to Exynos3250 PMU
ARM: dts: exynos: Enable ADC on Odroid HC1
arm64: dts: sprd: Remove wildcard compatible string
arm64: dts: sprd: Add SC27XX fuel gauge device
arm64: dts: sprd: Add SC2731 charger device
arm64: dts: sprd: Add ADC calibration support
arm64: dts: sprd: Remove PMIC INTC irq trigger type
arm64: dts: rockchip: Enable tsadc device on rock960
ARM: dts: rockchip: add chosen node on veyron devices
...
Pull networking updates from David Miller:
"Here we go, another merge window full of networking and #ebpf changes:
1) Snoop DHCPACKS in batman-adv to learn MAC/IP pairs in the DHCP
range without dealing with floods of ARP traffic, from Linus
Lüssing.
2) Throttle buffered multicast packet transmission in mt76, from
Felix Fietkau.
3) Support adaptive interrupt moderation in ice, from Brett Creeley.
4) A lot of struct_size conversions, from Gustavo A. R. Silva.
5) Add peek/push/pop commands to bpftool, as well as bash completion,
from Stanislav Fomichev.
6) Optimize sk_msg_clone(), from Vakul Garg.
7) Add SO_BINDTOIFINDEX, from David Herrmann.
8) Be more conservative with local resends due to local congestion,
from Yuchung Cheng.
9) Allow vetoing of unsupported VXLAN FDBs, from Petr Machata.
10) Add health buffer support to devlink, from Eran Ben Elisha.
11) Add TXQ scheduling API to mac80211, from Toke Høiland-Jørgensen.
12) Add statistics to basic packet scheduler filter, from Cong Wang.
13) Add GRE tunnel support for mlxsw Spectrum-2, from Nir Dotan.
14) Lots of new IP tunneling forwarding tests, also from Nir Dotan.
15) Add 3ad stats to bonding, from Nikolay Aleksandrov.
16) Lots of probing improvements for bpftool, from Quentin Monnet.
17) Various nfp drive #ebpf JIT improvements from Jakub Kicinski.
18) Allow #ebpf programs to access gso_segs from skb shared info, from
Eric Dumazet.
19) Add sock_diag support for AF_XDP sockets, from Björn Töpel.
20) Support 22260 iwlwifi devices, from Luca Coelho.
21) Use rbtree for ipv6 defragmentation, from Peter Oskolkov.
22) Add JMP32 instruction class support to #ebpf, from Jiong Wang.
23) Add spinlock support to #ebpf, from Alexei Starovoitov.
24) Support 256-bit keys and TLS 1.3 in ktls, from Dave Watson.
25) Add device infomation API to devlink, from Jakub Kicinski.
26) Add new timestamping socket options which are y2038 safe, from
Deepa Dinamani.
27) Add RX checksum offloading for various sh_eth chips, from Sergei
Shtylyov.
28) Flow offload infrastructure, from Pablo Neira Ayuso.
29) Numerous cleanups, improvements, and bug fixes to the PHY layer
and many drivers from Heiner Kallweit.
30) Lots of changes to try and make packet scheduler classifiers run
lockless as much as possible, from Vlad Buslov.
31) Support BCM957504 chip in bnxt_en driver, from Erik Burrows.
32) Add concurrency tests to tc-tests infrastructure, from Vlad
Buslov.
33) Add hwmon support to aquantia, from Heiner Kallweit.
34) Allow 64-bit values for SO_MAX_PACING_RATE, from Eric Dumazet.
And I would be remiss if I didn't thank the various major networking
subsystem maintainers for integrating much of this work before I even
saw it. Alexei Starovoitov, Daniel Borkmann, Pablo Neira Ayuso,
Johannes Berg, Kalle Valo, and many others. Thank you!"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2207 commits)
net/sched: avoid unused-label warning
net: ignore sysctl_devconf_inherit_init_net without SYSCTL
phy: mdio-mux: fix Kconfig dependencies
net: phy: use phy_modify_mmd_changed in genphy_c45_an_config_aneg
net: dsa: mv88e6xxx: add call to mv88e6xxx_ports_cmode_init to probe for new DSA framework
selftest/net: Remove duplicate header
sky2: Disable MSI on Dell Inspiron 1545 and Gateway P-79
net/mlx5e: Update tx reporter status in case channels were successfully opened
devlink: Add support for direct reporter health state update
devlink: Update reporter state to error even if recover aborted
sctp: call iov_iter_revert() after sending ABORT
team: Free BPF filter when unregistering netdev
ip6mr: Do not call __IP6_INC_STATS() from preemptible context
isdn: mISDN: Fix potential NULL pointer dereference of kzalloc
net: dsa: mv88e6xxx: support in-band signalling on SGMII ports with external PHYs
cxgb4/chtls: Prefix adapter flags with CXGB4
net-sysfs: Switch to bitmap_zalloc()
mellanox: Switch to bitmap_zalloc()
bpf: add test cases for non-pointer sanitiation logic
mlxsw: i2c: Extend initialization by querying resources data
...
Johan Hedberg says:
====================
pull request: bluetooth-next 2019-03-02
Here's one more bluetooth-next pull request for the 5.1 kernel:
- Added support for MediaTek MT7663U and MT7668U UART devices
- Cleanups & fixes to the hci_qca driver
- Fixed wakeup pin behavior for QCA6174A controller
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The LS1028A RDB board features an Atheros PHY connected over
SGMII to the ENETC PF0 (or Port0). ENETC Port1 (PF1) has no
external connection on this board, so it can be disabled for now.
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The LS1028A SoC features a PCI Integrated Endpoint Root Complex
(IERC) defining several integrated PCI devices, including the ENETC
ethernet controller integrated endpoints (IEPs). The IERC implements
ECAM (Enhanced Configuration Access Mechanism) to provide access
to the PCIe config space of the IEPs. This means the the IEPs
(including ENETC) do not support the standard PCIe BARs, instead
the Enhanced Allocation (EA) capability structures in the ECAM space
are used to fix the base addresses in the system, and the PCI
subsystem uses these structures for device enumeration and discovery.
The "ranges" entries contain basic information from these EA capabily
structures required by the kernel for device enumeration.
The current patch also enables the first 2 ENETC PFs (Physiscal
Functions) and the associated VFs (Virtual Functions), 2 VFs for
each PF. Each of these ENETC PFs has an external ethernet port
on the LS1028A SoC.
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Another batch of changes for ASoC, no big core changes - it's mainly
small fixes and improvements for individual drivers.
- A big refresh and cleanup of the Samsung drivers, fixing a number of
issues which allow the driver to be used with a wider range of
userspaces.
- Fixes for the Intel drivers to make them more standard so less likely
to get bitten by core issues.
- New driver for Cirrus Logic CS35L26.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlx3z7ETHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0H5QB/9jwKEwOdk6ynoFUpQwXPPkQl7CGkIh
P8J3OMTt+U4FNOrVG2S7xgUl69ZoaLm9rS/PHVrMV5krSLqY//2CTvF068qDBBlj
haBxgeRbe4pwLZPfFUnWvn6v1rdvNCXzDG/be9jGPJjDcm6wK44VJQWkPbqTsh6O
ZORqvKn48D89W0DegG1B+4jvbietPkhA0+nHQXwsWZ+sfMcEV/AWWsE5FIQ7ucCC
bundBBncUFKMMp9whuhj2W9FO62LUd8OAM7ejis3hfKk9MsQWUy6vrcN1XgRCq47
4I0doB5o+WhsOGMTZMcuhFISCVaCDqbNqGuVbeK0sdonjc1xz0682jLo
=9rq8
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: More changes for v5.1
Another batch of changes for ASoC, no big core changes - it's mainly
small fixes and improvements for individual drivers.
- A big refresh and cleanup of the Samsung drivers, fixing a number of
issues which allow the driver to be used with a wider range of
userspaces.
- Fixes for the Intel drivers to make them more standard so less likely
to get bitten by core issues.
- New driver for Cirrus Logic CS35L26.
Currently, we don't coordinate BT USB activity with our handling of the
BT out-of-band wake pin, and instead just use gpio-keys. That causes
problems because we have no way of distinguishing wake activity due to a
BT device (e.g., mouse) vs. the BT controller (e.g., re-configuring wake
mask before suspend). This can cause spurious wake events just because
we, for instance, try to reconfigure the host controller's event mask
before suspending.
We can avoid these synchronization problems by handling the BT wake pin
directly in the btusb driver -- for all activity up until BT controller
suspend(), we simply listen to normal USB activity (e.g., to know the
difference between device and host activity); once we're really ready to
suspend the host controller, there should be no more host activity, and
only *then* do we unmask the GPIO interrupt.
This is already supported by btusb; we just need to describe the wake
pin in the right node.
We list 2 compatible properties, since both PID/VID pairs show up on
Scarlet devices, and they're both essentially identical QCA6174A-based
modules.
Also note that the polarity was wrong before: Qualcomm implemented WAKE
as active high, not active low. We only got away with this because
gpio-keys always reconfigured us as bi-directional edge-triggered.
Finally, we have an external pull-up and a level-shifter on this line
(we didn't notice Qualcomm's polarity in the initial design), so we
can't do pull-down. Switch to pull-none.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
My console locks up as soon as Linux writes to [88800000,88f00000[
AFAIU, that memory area is reserved for trustzone.
Extend TZ reserved memory range, to prevent Linux from stepping on
trustzone's toes.
Cc: stable@vger.kernel.org # 4.20+
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Fixes: c783394956 ("arm64: dts: qcom: msm8998: Add smem related nodes")
Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Fix PHY reset signal on clearfog gt 8K (Armada 8040 based)
Fix NAND description on Armada XP boards which was broken since a few
release
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCXG/EtQAKCRALBhiOFHI7
1VPDAJ9DSFQaCmlSRwC/jO1HvchB+y9sxACcDQioH28bCYQt3SYp7K87D1ow8wE=
=b5Ed
-----END PGP SIGNATURE-----
Merge tag 'mvebu-fixes-5.0-2' of git://git.infradead.org/linux-mvebu into arm/fixes
mvebu fixes for 5.0 (part 2)
Fix PHY reset signal on clearfog gt 8K (Armada 8040 based)
Fix NAND description on Armada XP boards which was broken since a few
release
* tag 'mvebu-fixes-5.0-2' of git://git.infradead.org/linux-mvebu:
arm64: dts: clearfog-gt-8k: fix SGMII PHY reset signal
ARM: dts: armada-xp: fix Armada XP boards NAND description
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
"nvidia,model" property is added to pass custom name for hda sound card.
This is parsed in hda driver and used for card name. This aligns with the
way with which sound cards are named in general.
This patch populates above for jetson-tx1, jetson-tx2 and jetson-xavier.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Jonathan Hunter <jonathanh@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add the PCIE EP node in dts for ls1046a.
Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Minghuan Lian <minghuan.lian@nxp.com>
Reviewed-by: Zhiqiang Hou <zhiqiang.hou@nxp.com>
Reviewed-by: Rob Herring <robh+dt@kernel.org>
- Add interrupt properties to S900 pinctrl node
- Add Reset controller support for S700
- Add Reset controller support for S900
- Add pinctrl support for S700
- Add I2C support for S700
- Enable I2C0 and I2C1 for s700-cubieboard7
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZ6VDKoFIy9ikWCeXVZ8R5v6RzvUFAlxnwSoACgkQVZ8R5v6R
zvXpeAf+NwhGUPtKeKeXOct24HqHVwvdbyBajcqcsUYsGXTxaIH7uGEupITAkxAj
6kLOpmW3WDpMr2yBHSS5oEnityD2VKCL1BLP9TE7Plj56QsWucWlWsY2xhG1828+
eT1pbSPECg7lRZnAOMj+B6EqtEcZzaoxlRdRLw6rJmb4+H5aJ80VT3pIpYI+sjR9
5wnuaWSE2nxJoICm1dL1CeVPfT9iNluYSxerO13tkF9/lj7bQpeRI85OMvpUVo5Z
iQ6OGJ6sc4Ynn0Z9F7hdBOb6tB8Z3ampXu8IMiXir1d+RG/uGNlhsQyGsgXGZ++Y
uQQR4as0k+vYYscRR2J0sLhhBT4h2w==
=EHRP
-----END PGP SIGNATURE-----
Merge tag 'actions-arm64-dt-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions into arm/dt
Actions ARM64 DT changes for v5.1:
- Add interrupt properties to S900 pinctrl node
- Add Reset controller support for S700
- Add Reset controller support for S900
- Add pinctrl support for S700
- Add I2C support for S700
- Enable I2C0 and I2C1 for s700-cubieboard7
* tag 'actions-arm64-dt-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions:
arm64: dts: actions: s700-cubieboard7: Enable I2C0 and I2C1
arm64: dts: actions: s700: Add I2C controller nodes
arm64: dts: actions: Add pinctrl node for Actions Semi S700
arm64: dts: actions: Add Reset Controller support for S900 SoC
arm64: dts: actions: Add Reset Controller support for S700 SoC
arm64: dts: actions: Add interrupt properties to pinctrl node for S900
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add charger device node and related battery node for SC2731 PMIC.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch adds phandles to the calibration cells provided by the Efuse
device, which is used to calibrate the ADC channel scales.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Spreadtrum PMIC INTC controller has no registers to set trigger type,
since it is always high level trigger as default. So remove its child
devices' irq trigger type setting and change #interrupt-cells to 1.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the thermal sensor. This device also provides
temperature shutdown protection. The shutdown value is
set at 110C, as tested by the vendor.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
- support for a new variant of pca953x
- documentation fix from Wolfram
- some tegra186 name changes
- two minor fixes for madera and altera-a10sr
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAlxleLcACgkQEacuoBRx
13I45Q//YMGUYzkMjOL+lp2DYnnVhVNqrF4hoLjinWVrnhZ6gqu88RgV2Cea4Pta
oxVxnSsE8LK7kY8VZ8tcBmIqLLkQAJdSVtqkeSoZF2vhWBAbE9ZaSOYb17SIkSXK
Ok16lZgZ+ZWOM5EjEvuRpB/qYGjX2glD5/Y2Kl7+wsX1W6U2pXasP0IjhcvDU8mJ
NXNgfkr6kluMUqHJyqKo8eT/P3Hdv0CK9GsN2vGyfJenCdTSd7EC6KuhWAivi+fG
/lf1bVuc2cCiXjxdSOXx+Yz7SjNe56viTaqnn/K6OlfLgErjKnRW+AxPkTZXNtDi
pfMMpPXiwPcbQR2wrXG/7OMmJ1kUsfWoIUCx5RDwhF1KbEQVqgaSITLylk+4Yp/3
eM0fYsQ+KvOdAnWKSgfxBhaaiO7z5XDdrnkSHBDoiBrm07BqBgK/v3Rivzf2GMEv
QvM4OBfThS9I8skV5BaOBRDfHZs4N0EU/vhsW9gt50urtlSM0vSYx6kdMq/8R0k4
NkJT43u+1vi5koMljBAsZYZiyXOQ2B+PlfpTMfMu+93QH8wlu9mOt1r3YTQyA1Xf
jiOK8M2yQKP5g7RuPM6MtMsqlZKDM5nAlSf7S280Z3+vBd+LaELbXvT2/JL5ViGU
hfH/gaNwUGUYd8EsWvfhHVdPAAecDCwxfKyKEnFGhMrtunTgwfI=
=nV64
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.1-updates-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into devel
gpio updates for v5.1
- support for a new variant of pca953x
- documentation fix from Wolfram
- some tegra186 name changes
- two minor fixes for madera and altera-a10sr
* Add MSM8998 RPMCC, I2C, and USB related nodes
* Add MSM8996 rpmpd node
* Fix typo in MSM8996 pin definitions
* Disable MSM8996 VFE smmu to fix security violation
* Add I2C, SPI, rpmcc, uart, and WCN3990 wlan nodes on QCS404
* Enable SDCC1 HS400 support on QCS404
* Add a multitude of nodes on SDM845:
SD, UFS, USB, LPASS, SCM, QSPI, PDC, DPU, videocc, GPU, RPMh
bus interconnect, WCN3990 WLAN
* Add gpio ranges to SDM845 TLMM
* Fix regulator load on sdcard on MSM8998-mtp board
* Add thermal trip points to cpufreq
* Add SDM845 IOMMU info for SDHC, USB, and WLAN
* Fix MSM8916 clock cell argument
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=FgSp
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into arm/dt
Qualcomm ARM64 Updates for v5.1
* Add thermal trip points to cpufreq
* Add SDM845 IOMMU info for SDHC, USB, and WLAN
* Fix MSM8916 clock cell argument
* tag 'qcom-arm64-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
arm64: dts: sdm845: Fixup dependency on RPMPD includes
arm64: dts: sdm845: Add clocks and iommus to WCN3990 WLAN node
arm64: dts: qcom: sdm845: Define iommus for USB controllers
arm64: dts: qcom: sdm845: Define IOMMU for sdhc 2
arm64: dts: sdm845: wireup the thermal trip points to cpufreq
arm64: dts: msm8916: remove bogus argument to the cpu clock
[arnd: I've pulled the earlier branch again after an update, this
adds the stuff listed above, and fixes a build error from the missing
dependency, as I requested]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Contains a few DT updates on top of part 1 of the pull:
- MSMC RAM support (on-chip SRAM)
- Main system control module support
- USB support
- ADC support
There is an extra dt-binding update included, which has been acked
by Rob.
-----BEGIN PGP SIGNATURE-----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=L6dq
-----END PGP SIGNATURE-----
Merge tag 'am654-for-v5.1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux into HEAD
AM654x SoC updates for v5.1 (part 2)
Contains a few DT updates on top of part 1 of the pull:
- MSMC RAM support (on-chip SRAM)
- Main system control module support
- USB support
- ADC support
There is an extra dt-binding update included, which has been acked
by Rob.
* tag 'am654-for-v5.1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux:
arm64: dts: ti: k3-am65-mcu: Add ADC nodes
dt-bindings: input: ti-tsc-adc: Add new compatible for AM654 SoCs
arm64: dts: ti: k3-am654-base-board: enable USB1
arm64: dts: ti: k3-am6: add USB support
arm64: dts: ti: am654: Add Main System Control Module node
arm64: dts: ti: k3-am65: Add MSMC RAM node
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch fixes a dependency issue with the RPMPD dt bindings. This
temporarily removes the include file and adds hardcoded values for the
OPPs until the other changes full land. This will be addressed in 5.2.
Fixes: 5b6f186f0a ("arm64: dts: sdm845: Add rpmh powercontroller node")
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
- Extend timeout for wifi to power up on Ultra96
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlxiwJUACgkQykllyylKDCGTFQCgkxFLqTdsRVpcXbwdVZbI0TBL
CukAn3kkFlyUv/OE8z3K1u32tHKTDqyK
=2Qw6
-----END PGP SIGNATURE-----
Merge tag 'zynqmp-dt-for-v5.1' of https://github.com/Xilinx/linux-xlnx into arm/dt
arm64: dts: zynqmp: DT changes for v5.1
- Extend timeout for wifi to power up on Ultra96
* tag 'zynqmp-dt-for-v5.1' of https://github.com/Xilinx/linux-xlnx:
arm64: dts: zcu100-revC: Give wifi some time after power-on
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Interrupt support to Armada 7K/8K thermal nodes
- Armada 37xx related patches allowing to enable suspend to RAM
(USB2, USB3, PCIe, SATA, DSA)
- uDPU board support (Armada-3720 based):single-port FTTdp
distribution point unit
- Fixes for EspressoBin Ethernet support when using U-Boot mainline
- cleanup for partitions under flashes nodes
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCXF3x1wAKCRALBhiOFHI7
1ZtFAJ4pn8nIeHqWgYEUmWmCpQXnUoc4eQCgninj7JcAFV8KNLKhRCkKdlkeO38=
=Wt6S
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt64-5.1-1' of git://git.infradead.org/linux-mvebu into arm/dt
mvebu dt64 for 5.1 (part 1)
- Interrupt support to Armada 7K/8K thermal nodes
- Armada 37xx related patches allowing to enable suspend to RAM
(USB2, USB3, PCIe, SATA, DSA)
- uDPU board support (Armada-3720 based):single-port FTTdp
distribution point unit
- Fixes for EspressoBin Ethernet support when using U-Boot mainline
- cleanup for partitions under flashes nodes
* tag 'mvebu-dt64-5.1-1' of git://git.infradead.org/linux-mvebu:
arm64: dts: marvell: armada-37xx: link USB hosts with their PHYs
arm64: dts: marvell: armada-3720-espressobin: declare SATA PHY property
arm64: dts: marvell: armada-3720-espressobin: declare PCIe PHY
arm64: dts: marvell: armada-37xx: declare the COMPHY node
arm64: dts: marvell: Remove unnecessary #address-cells/#size-cells under flashes
arm64: dts: armada-3720-espressobin: Set mv88e6341 cpu port as RGMII-ID
arm64: dts: armada-3720-espressobin: Configure RGMII and SMI pins
arm64: dts: marvell: Add device tree for uDPU board
arm64: dts: marvell: armada-3720-espressobin: declare PCIe warm reset pin
arm64: dts: marvell: armada-37xx: declare PCIe reset pin
arm64: dts: marvell: armada-37xx: declare USB2 UTMI PHYs
arm64: dts: marvell: armada-37xx: fix USB2 memory region
arm64: dts: marvell: armada-37xx: declare SATA clock
arm64: dts: marvell: armada-37xx: fix SATA node scope
arm64: dts: marvell: add interrupt support to cp110 thermal node
arm64: dts: marvell: add interrupt support to ap806 thermal node
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add device nodes for usb3, iommu, smi, i2c, spi, pwm,
mmc, NAND flash and PCIe
mt6797:
add pinctrl node
enable uart pins on x20 board
enable uart pins on EVB
mt7622:
Add all CPUs to the cooling maps
mt7623a:
Remove unused binding description
mt7629:
Add binding description for the SoC and the BananaPi
based on this chip
mt8173:
Add all CPUs to the cooling maps
mt8183:
Add binding description for the SoC
-----BEGIN PGP SIGNATURE-----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=xm9P
-----END PGP SIGNATURE-----
Merge tag 'v5.0-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt
mt2712:
Add device nodes for usb3, iommu, smi, i2c, spi, pwm,
mmc, NAND flash and PCIe
mt6797:
add pinctrl node
enable uart pins on x20 board
enable uart pins on EVB
mt7622:
Add all CPUs to the cooling maps
mt7623a:
Remove unused binding description
mt7629:
Add binding description for the SoC and the BananaPi
based on this chip
mt8173:
Add all CPUs to the cooling maps
mt8183:
Add binding description for the SoC
* tag 'v5.0-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
dt-bindings: arm: mediatek: add support for MT7622 BPI-R64 and MT7629 RFB
dt-bindings: arm: mediatek: remove unused "mediatek, mt7623a"
dt-bindings: arm: Add bindings for Mediatek MT8183 SoC Platform
arm64: dts: add pcie nodes for MT2712
arm64: dts: add nand nodes for MT2712
arm64: dts: add mmc nodes for MT2712
arm64: dts: add pwm nodes for MT2712
arm64: dts: add spi nodes for MT2712
arm64: dts: add i2c nodes for MT2712
arm64: dts: add iommu/smi nodes for MT2712
arm64: dts: Add USB3 related nodes for MT2712
ARM64: dts: mediatek: Add all CPUs in cooling maps
arm64: dts: Add uart for mt6797 EVB
arm64: dts: mediatek: x20: Add pinmux support for UART1
arm64: dts: mediatek: mt6797: Add pinctrl support
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This contains a couple of fixes to existing device trees, enables CPU
frequency scaling on various Tegra210 boards, enables the TCU as debug
serial port on Jetson Xavier, adds various improvements for SDMMC on
Tegra210, Tegra186 and Tegra194 boards and finally adds initial support
for the NVIDIA Shield TV.
-----BEGIN PGP SIGNATURE-----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=31KA
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.1-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
arm64: tegra: Device tree changes for v5.1-rc1
This contains a couple of fixes to existing device trees, enables CPU
frequency scaling on various Tegra210 boards, enables the TCU as debug
serial port on Jetson Xavier, adds various improvements for SDMMC on
Tegra210, Tegra186 and Tegra194 boards and finally adds initial support
for the NVIDIA Shield TV.
* tag 'tegra-for-5.1-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (25 commits)
arm64: tegra: Update compatible for Tegra186 I2C
arm64: tegra: Update compatible for Tegra210 I2C
arm64: tegra: Support 200 MHz for SDMMC on Tegra194
arm64: tegra: Add CQE Support for SDMMC4
arm64: tegra: Add SDMMC auto-calibration settings
arm64: tegra: Mark TCU as primary serial port on Tegra194 P2888
arm64: tegra: Add nodes for TCU on Tegra194
arm64: tegra: Enable DFLL clock on Smaug
arm64: tegra: Add CPU power rail regulator on Smaug
arm64: tegra: Enable DFLL clock on Jetson TX1
arm64: tegra: Add pinmux for PWM-based DFLL support on P2597
arm64: tegra: Add CPU clocks on Tegra210
arm64: tegra: Add DFLL clock on Tegra210
arm64: tegra: p2771-0000: Use TEGRA186_ prefix for GPIO names
arm64: tegra: p3310: Use TEGRA186_ prefix for GPIO names
arm64: tegra: p2597: Sort nodes by unit-address
arm64: tegra: p2972: Sort nodes properly
arm64: tegra: Add regulators for Tegra210 Darcy
arm64: tegra: Add pinmux for Darcy board
arm64: tegra: Add gpio-keys nodes for Darcy
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Our usual round of DT changes for the arm64 Allwinner SoCs:
- Enabling of the various power supplies on most a64 boards
- H6 SRAM controller support
- A64 CSI support
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXF1ZiQAKCRDj7w1vZxhR
xeeaAQCuII0MyMyRYhk4XPkjRncEks7A1Fp7u1kjR4VjbNq8JQD+OhCbKMAz4DVv
T7DeI92HwEO2Dx/ggNMVYDCUDyH55gI=
=Pd5b
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt64-for-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Allwinner arm64 DT changes for 5.1, take 2
Our usual round of DT changes for the arm64 Allwinner SoCs:
- Enabling of the various power supplies on most a64 boards
- H6 SRAM controller support
- A64 CSI support
* tag 'sunxi-dt64-for-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: a64: Enable PMIC power supplies on various boards
arm64: dts: allwinner: a64: teres-i: enable power supplies
arm64: dts: allwinner: h6: Add support for the SRAM C1 section
dt-bindings: sram: sunxi: Add compatible for the H6 SRAM C1
arm64: dts: allwinner: a64: Add A64 CSI controller
arm64: dts: allwinner: h6: Move GIC device node fix base address ordering
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Our usual round of DT changes shared between arm and arm64.
We have a bunch of changes for board, improving the eMMC support on the H5
variant of the All-H3-CC, enabling HDMI and reworking the CSI driver.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXF1X8QAKCRDj7w1vZxhR
xX9ZAP9KwFKKehrS1QJjTHKeowUKEnRHuDj2MlwTZJgCw/AMMgEAzgRZwY/VH/Os
aQIhJho9hWmBE0dePIZuWzzCp1giNw8=
=7jQV
-----END PGP SIGNATURE-----
Merge tag 'sunxi-h3-h5-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Allwinner H3 and H5 changes for 5.1
Our usual round of DT changes shared between arm and arm64.
We have a bunch of changes for board, improving the eMMC support on the H5
variant of the All-H3-CC, enabling HDMI and reworking the CSI driver.
* tag 'sunxi-h3-h5-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: h5: libretech-all-h3-cc: Mark eMMC HS-DDR 3.3V capable
ARM: dts: sunxi: h3/h5: Drop A31 fallback compatible for CSI controller
ARM: dts: sun8i-h3: nanopi-m1-plus: enable HDMI
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add SMMU node for Stratix10
- Add vendor prefix fo Novtech
- Add a new 96Boards Chameleon96 board that uses a Cyclone5 SoCFPGA
- Add missing reset properties for all IP on Cyclone5 and Arria10
-----BEGIN PGP SIGNATURE-----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=8OgV
-----END PGP SIGNATURE-----
Merge tag 'socfpga_dts_for_v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt
SoCFPGA DTS updates for v5.1
- Add SMMU node for Stratix10
- Add vendor prefix fo Novtech
- Add a new 96Boards Chameleon96 board that uses a Cyclone5 SoCFPGA
- Add missing reset properties for all IP on Cyclone5 and Arria10
* tag 'socfpga_dts_for_v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: dts: socfpga: update more missing reset properties
ARM: dts: socfpga: update missing reset property peripherals
ARM: dts: Add support for 96Boards Chameleon96 board
dt-bindings: vendor-prefixes: Add Novtech Vendor Prefix
arm64: dts: stratix10: Add Stratix10 SMMU support
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
for 5.1, please pull the following:
- Stefan adds support for the Raspberry Pi 3 A+ by using the same
mechanism of creating a symbolic reference to the ARM 32-bit DTS file
-----BEGIN PGP SIGNATURE-----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=iDFK
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.1/devicetree-arm64' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM64-based SoCs Device Tree updates
for 5.1, please pull the following:
- Stefan adds support for the Raspberry Pi 3 A+ by using the same
mechanism of creating a symbolic reference to the ARM 32-bit DTS file
* tag 'arm-soc/for-5.1/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: Add reference to RPi 3 A+
ARM: dts: add Raspberry Pi 3 A+
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Linus Torvalds