- Fix return error code in mtk_cpu_dvfs_info_init (Yang Yingliang).
- Minor cleanups and support for new boards for Qcom cpufreq drivers
(Bryan O'Donoghue, Konrad Dybcio, Pierre Gondois, and Yicong Yang).
- Fix sparse warnings for Tegra cpufreq driver (Viresh Kumar).
- Make dev_pm_opp_set_regulators() accept NULL terminated list (Viresh
Kumar).
- Add dev_pm_opp_set_config() and friends and migrate other users and
helpers to using them (Viresh Kumar).
- Add support for multiple clocks for a device (Viresh Kumar and
Krzysztof Kozlowski).
- Configure resources before adding OPP table for Venus (Stanimir
Varbanov).
- Keep reference count up for opp->np and opp_table->np while they are
still in use (Liang He).
- Minor OPP cleanups (Viresh Kumar and Yang Li).
- Add a trace event for cpuidle to track missed (too deep or too
shallow) wakeups (Kajetan Puchalski).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmLxUA0SHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxypYQAK/sYS76XzKRjVsPmC082FVlA9Helhsa
Op50DSnhfzYAWrtRZM5VPsV2CgQkmc5KCmZJSd1ZKIFcOpjlJT/rvaVaSH7Ltcn5
52GOus6KXKCL3FegQLy3bLcmKkEJIXb3uhWE2VlSuj2cxx6KE2g4bUwPE0pRr++Y
RkfaT6hcUzxxOAKw1cQhdXgBoXKL/ZeypmpZ95joYuas/mozKskM5SQFX455JCQ9
t4vaRzrsHzxi5ELiML75TYMY97sF367wSs+4jZSgPBllbJcRXEMg+JkTccKRYrsZ
k/kDvP5xVFzKT/dYpNpW3u/pl94+xZuh5WLF9/AqwC/qs7kLPJJ0/8mfTTd63DjZ
3KrkimiQ3d2XMAL4L6FoK+T8v6MwzmlN0elmHHdtmu9mY+v01CwAzjpxdvaFoELK
V6BCRRX8KNwYsrAJ4EpDK9TvPYJf8yT3jvGDcjPZY9RYlebje0Q825XOcxea4Dfe
oFxiEWgfK9gzOBvaa24oifKDy2RVy6FvR43qQeiPG4AWAFjr4qP9cDO4q5OL/BuE
sXpsGY5NE/e8JH9hkgmUK1ms50zk4UMbRC5ZoZuHWyiaFlJdMRF3cUGHe3ylPrxb
XOFZz8Zl4WeAqBjGGHuiMedwEbmQH2RhdAMCQO1nxoq3UXy6E2/ojI1G1uQ9IEm0
5FFouJ+bEnqO
=LBb0
-----END PGP SIGNATURE-----
Merge tag 'pm-5.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These are ARM cpufreq updates and operating performance points (OPP)
updates plus one cpuidle update adding a new trace point.
Specifics:
- Fix return error code in mtk_cpu_dvfs_info_init (Yang Yingliang).
- Minor cleanups and support for new boards for Qcom cpufreq drivers
(Bryan O'Donoghue, Konrad Dybcio, Pierre Gondois, and Yicong Yang).
- Fix sparse warnings for Tegra cpufreq driver (Viresh Kumar).
- Make dev_pm_opp_set_regulators() accept NULL terminated list
(Viresh Kumar).
- Add dev_pm_opp_set_config() and friends and migrate other users and
helpers to using them (Viresh Kumar).
- Add support for multiple clocks for a device (Viresh Kumar and
Krzysztof Kozlowski).
- Configure resources before adding OPP table for Venus (Stanimir
Varbanov).
- Keep reference count up for opp->np and opp_table->np while they
are still in use (Liang He).
- Minor OPP cleanups (Viresh Kumar and Yang Li).
- Add a trace event for cpuidle to track missed (too deep or too
shallow) wakeups (Kajetan Puchalski)"
* tag 'pm-5.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (55 commits)
cpuidle: Add cpu_idle_miss trace event
venus: pm_helpers: Fix warning in OPP during probe
OPP: Don't drop opp->np reference while it is still in use
OPP: Don't drop opp_table->np reference while it is still in use
cpufreq: tegra194: Staticize struct tegra_cpufreq_soc instances
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM6375 compatible
dt-bindings: opp: Add msm8939 to the compatible list
dt-bindings: opp: Add missing compat devices
dt-bindings: opp: opp-v2-kryo-cpu: Fix example binding checks
cpufreq: Change order of online() CB and policy->cpus modification
cpufreq: qcom-hw: Remove deprecated irq_set_affinity_hint() call
cpufreq: qcom-hw: Disable LMH irq when disabling policy
cpufreq: qcom-hw: Reset cancel_throttle when policy is re-enabled
cpufreq: qcom-cpufreq-hw: use HZ_PER_KHZ macro in units.h
cpufreq: mediatek: fix error return code in mtk_cpu_dvfs_info_init()
OPP: Remove dev{m}_pm_opp_of_add_table_noclk()
PM / devfreq: tegra30: Register config_clks helper
OPP: Allow config_clks helper for single clk case
OPP: Provide a simple implementation to configure multiple clocks
OPP: Assert clk_count == 1 for single clk helpers
...
Here is the set of SPDX comment updates for 6.0-rc1.
Nothing huge here, just a number of updated SPDX license tags and
cleanups based on the review of a number of common patterns in GPLv2
boilerplate text. Also included in here are a few other minor updates,
2 USB files, and one Documentation file update to get the SPDX lines
correct.
All of these have been in the linux-next tree for a very long time.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYupz3g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynPUgCgslaf2ssCgW5IeuXbhla+ZBRAzisAnjVgOvLN
4AKdqbiBNlFbCroQwmeQ
=v1sg
-----END PGP SIGNATURE-----
Merge tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here is the set of SPDX comment updates for 6.0-rc1.
Nothing huge here, just a number of updated SPDX license tags and
cleanups based on the review of a number of common patterns in GPLv2
boilerplate text.
Also included in here are a few other minor updates, two USB files,
and one Documentation file update to get the SPDX lines correct.
All of these have been in the linux-next tree for a very long time"
* tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (28 commits)
Documentation: samsung-s3c24xx: Add blank line after SPDX directive
x86/crypto: Remove stray comment terminator
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_398.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_391.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_390.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_292.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_179.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 2)
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1)
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_152.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_149.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_147.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_133.RULE
...
Add a trace event for cpuidle to track missed (too deep or too shallow)
wakeups.
After each wakeup, CPUIdle already computes whether the entered state was
optimal, above or below the desired one and updates the relevant
counters. This patch makes it possible to trace those events in addition
to just reading the counters.
The patterns of types and percentages of misses across different
workloads appear to be very consistent. This makes the trace event very
useful for comparing the relative correctness of different CPUIdle
governors for different types of workloads, or for finding the
optimal governor for a given device.
Signed-off-by: Kajetan Puchalski <kajetan.puchalski@arm.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This pull request contains the following branches:
doc.2022.06.21a: Documentation updates.
fixes.2022.07.19a: Miscellaneous fixes.
nocb.2022.07.19a: Callback-offload updates, perhaps most notably a new
RCU_NOCB_CPU_DEFAULT_ALL Kconfig option that causes all CPUs to
be offloaded at boot time, regardless of kernel boot parameters.
This is useful to battery-powered systems such as ChromeOS
and Android. In addition, a new RCU_NOCB_CPU_CB_BOOST kernel
boot parameter prevents offloaded callbacks from interfering
with real-time workloads and with energy-efficiency mechanisms.
poll.2022.07.21a: Polled grace-period updates, perhaps most notably
making these APIs account for both normal and expedited grace
periods.
rcu-tasks.2022.06.21a: Tasks RCU updates, perhaps most notably reducing
the CPU overhead of RCU tasks trace grace periods by more than
a factor of two on a system with 15,000 tasks. The reduction
is expected to increase with the number of tasks, so it seems
reasonable to hypothesize that a system with 150,000 tasks might
see a 20-fold reduction in CPU overhead.
torture.2022.06.21a: Torture-test updates.
ctxt.2022.07.05a: Updates that merge RCU's dyntick-idle tracking into
context tracking, thus reducing the overhead of transitioning to
kernel mode from either idle or nohz_full userspace execution
for kernels that track context independently of RCU. This is
expected to be helpful primarily for kernels built with
CONFIG_NO_HZ_FULL=y.
-----BEGIN PGP SIGNATURE-----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=vUNm
-----END PGP SIGNATURE-----
Merge tag 'rcu.2022.07.26a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU updates from Paul McKenney:
- Documentation updates
- Miscellaneous fixes
- Callback-offload updates, perhaps most notably a new
RCU_NOCB_CPU_DEFAULT_ALL Kconfig option that causes all CPUs to be
offloaded at boot time, regardless of kernel boot parameters.
This is useful to battery-powered systems such as ChromeOS and
Android. In addition, a new RCU_NOCB_CPU_CB_BOOST kernel boot
parameter prevents offloaded callbacks from interfering with
real-time workloads and with energy-efficiency mechanisms
- Polled grace-period updates, perhaps most notably making these APIs
account for both normal and expedited grace periods
- Tasks RCU updates, perhaps most notably reducing the CPU overhead of
RCU tasks trace grace periods by more than a factor of two on a
system with 15,000 tasks.
The reduction is expected to increase with the number of tasks, so it
seems reasonable to hypothesize that a system with 150,000 tasks
might see a 20-fold reduction in CPU overhead
- Torture-test updates
- Updates that merge RCU's dyntick-idle tracking into context tracking,
thus reducing the overhead of transitioning to kernel mode from
either idle or nohz_full userspace execution for kernels that track
context independently of RCU.
This is expected to be helpful primarily for kernels built with
CONFIG_NO_HZ_FULL=y
* tag 'rcu.2022.07.26a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (98 commits)
rcu: Add irqs-disabled indicator to expedited RCU CPU stall warnings
rcu: Diagnose extended sync_rcu_do_polled_gp() loops
rcu: Put panic_on_rcu_stall() after expedited RCU CPU stall warnings
rcutorture: Test polled expedited grace-period primitives
rcu: Add polled expedited grace-period primitives
rcutorture: Verify that polled GP API sees synchronous grace periods
rcu: Make Tiny RCU grace periods visible to polled APIs
rcu: Make polled grace-period API account for expedited grace periods
rcu: Switch polled grace-period APIs to ->gp_seq_polled
rcu/nocb: Avoid polling when my_rdp->nocb_head_rdp list is empty
rcu/nocb: Add option to opt rcuo kthreads out of RT priority
rcu: Add nocb_cb_kthread check to rcu_is_callbacks_kthread()
rcu/nocb: Add an option to offload all CPUs on boot
rcu/nocb: Fix NOCB kthreads spawn failure with rcu_nocb_rdp_deoffload() direct call
rcu/nocb: Invert rcu_state.barrier_mutex VS hotplug lock locking order
rcu/nocb: Add/del rdp to iterate from rcuog itself
rcu/tree: Add comment to describe GP-done condition in fqs loop
rcu: Initialize first_gp_fqs at declaration in rcu_gp_fqs()
rcu/kvfree: Remove useless monitor_todo flag
rcu: Cleanup RCU urgency state for offline CPU
...
- Make cpufreq_show_cpus() more straightforward (Viresh Kumar).
- Drop unnecessary CPU hotplug locking from store() used by cpufreq
sysfs attributes (Viresh Kumar).
- Make the ACPI cpufreq driver support the boost control interface on
Zhaoxin/Centaur processors (Tony W Wang-oc).
- Print a warning message on attempts to free an active cpufreq policy
which should never happen (Viresh Kumar).
- Fix grammar in the Kconfig help text for the loongson2 cpufreq
driver (Randy Dunlap).
- Use cpumask_var_t for an on-stack CPU mask in the ondemand cpufreq
governor (Zhao Liu).
- Add trace points for guest_halt_poll_ns grow/shrink to the haltpoll
cpuidle driver (Eiichi Tsukata).
- Modify intel_idle to treat C1 and C1E as independent idle states on
Sapphire Rapids (Artem Bityutskiy).
- Extend support for wakeirq to callback wrappers used during system
suspend and resume (Ulf Hansson).
- Defer waiting for device probe before loading a hibernation image
till the first actual device access to avoid possible deadlocks
reported by syzbot (Tetsuo Handa).
- Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP (Bjorn
Helgaas).
- Add Raptor Lake-P to the list of processors supported by the Intel
RAPL driver (George D Sworo).
- Add Alder Lake-N and Raptor Lake-P to the list of processors for
which Power Limit4 is supported in the Intel RAPL driver (Sumeet
Pawnikar).
- Make pm_genpd_remove() check genpd_debugfs_dir against NULL before
attempting to remove it (Hsin-Yi Wang).
- Change the Energy Model code to represent power in micro-Watts and
adjust its users accordingly (Lukasz Luba).
- Add new devfreq driver for Mediatek CCI (Cache Coherent
Interconnect) (Johnson Wang).
- Convert the Samsung Exynos SoC Bus bindings to DT schema of
exynos-bus.c (Krzysztof Kozlowski).
- Address kernel-doc warnings by adding the description for unused
fucntion parameters in devfreq core (Mauro Carvalho Chehab).
- Use NULL to pass a null pointer rather than zero according to the
function propotype in imx-bus.c (Colin Ian King).
- Print error message instead of error interger value in
tegra30-devfreq.c (Dmitry Osipenko).
- Add checks to prevent setting negative frequency QoS limits for
CPUs (Shivnandan Kumar).
- Update the pm-graph suite of utilities to the latest revision 5.9
including multiple improvements (Todd Brandt).
- Drop pme_interrupt reference from the PCI power management
documentation (Mario Limonciello).
-----BEGIN PGP SIGNATURE-----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=XeLV
-----END PGP SIGNATURE-----
Merge tag 'pm-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These are mostly minor improvements all over including new CPU IDs for
the Intel RAPL driver, an Energy Model rework to use micro-Watt as the
power unit, cpufreq fixes and cleanus, cpuidle updates, devfreq
updates, documentation cleanups and a new version of the pm-graph
suite of utilities.
Specifics:
- Make cpufreq_show_cpus() more straightforward (Viresh Kumar).
- Drop unnecessary CPU hotplug locking from store() used by cpufreq
sysfs attributes (Viresh Kumar).
- Make the ACPI cpufreq driver support the boost control interface on
Zhaoxin/Centaur processors (Tony W Wang-oc).
- Print a warning message on attempts to free an active cpufreq
policy which should never happen (Viresh Kumar).
- Fix grammar in the Kconfig help text for the loongson2 cpufreq
driver (Randy Dunlap).
- Use cpumask_var_t for an on-stack CPU mask in the ondemand cpufreq
governor (Zhao Liu).
- Add trace points for guest_halt_poll_ns grow/shrink to the haltpoll
cpuidle driver (Eiichi Tsukata).
- Modify intel_idle to treat C1 and C1E as independent idle states on
Sapphire Rapids (Artem Bityutskiy).
- Extend support for wakeirq to callback wrappers used during system
suspend and resume (Ulf Hansson).
- Defer waiting for device probe before loading a hibernation image
till the first actual device access to avoid possible deadlocks
reported by syzbot (Tetsuo Handa).
- Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP (Bjorn
Helgaas).
- Add Raptor Lake-P to the list of processors supported by the Intel
RAPL driver (George D Sworo).
- Add Alder Lake-N and Raptor Lake-P to the list of processors for
which Power Limit4 is supported in the Intel RAPL driver (Sumeet
Pawnikar).
- Make pm_genpd_remove() check genpd_debugfs_dir against NULL before
attempting to remove it (Hsin-Yi Wang).
- Change the Energy Model code to represent power in micro-Watts and
adjust its users accordingly (Lukasz Luba).
- Add new devfreq driver for Mediatek CCI (Cache Coherent
Interconnect) (Johnson Wang).
- Convert the Samsung Exynos SoC Bus bindings to DT schema of
exynos-bus.c (Krzysztof Kozlowski).
- Address kernel-doc warnings by adding the description for unused
function parameters in devfreq core (Mauro Carvalho Chehab).
- Use NULL to pass a null pointer rather than zero according to the
function propotype in imx-bus.c (Colin Ian King).
- Print error message instead of error interger value in
tegra30-devfreq.c (Dmitry Osipenko).
- Add checks to prevent setting negative frequency QoS limits for
CPUs (Shivnandan Kumar).
- Update the pm-graph suite of utilities to the latest revision 5.9
including multiple improvements (Todd Brandt).
- Drop pme_interrupt reference from the PCI power management
documentation (Mario Limonciello)"
* tag 'pm-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (27 commits)
powercap: RAPL: Add Power Limit4 support for Alder Lake-N and Raptor Lake-P
PM: QoS: Add check to make sure CPU freq is non-negative
PM: hibernate: defer device probing when resuming from hibernation
intel_idle: make SPR C1 and C1E be independent
cpufreq: ondemand: Use cpumask_var_t for on-stack cpu mask
cpufreq: loongson2: fix Kconfig "its" grammar
pm-graph v5.9
cpufreq: Warn users while freeing active policy
cpufreq: scmi: Support the power scale in micro-Watts in SCMI v3.1
firmware: arm_scmi: Get detailed power scale from perf
Documentation: EM: Switch to micro-Watts scale
PM: EM: convert power field to micro-Watts precision and align drivers
PM / devfreq: tegra30: Add error message for devm_devfreq_add_device()
PM / devfreq: imx-bus: use NULL to pass a null pointer rather than zero
PM / devfreq: shut up kernel-doc warnings
dt-bindings: interconnect: samsung,exynos-bus: convert to dtschema
PM / devfreq: mediatek: Introduce MediaTek CCI devfreq driver
dt-bindings: interconnect: Add MediaTek CCI dt-bindings
PM: domains: Ensure genpd_debugfs_dir exists before remove
PM: runtime: Extend support for wakeirq for force_suspend|resume
...
The RCU dynticks counter is going to be merged into the context tracking
subsystem. Prepare with moving the IRQ extended quiescent states
entrypoints to context tracking. For now those are dumb redirection to
existing RCU calls.
[ paulmck: Apply Stephen Rothwell feedback from -next. ]
[ paulmck: Apply Nathan Chancellor feedback. ]
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Paul Gortmaker<paul.gortmaker@windriver.com>
Cc: Alex Belits <abelits@marvell.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
The RCU dynticks counter is going to be merged into the context tracking
subsystem. Start with moving the idle extended quiescent states
entrypoints to context tracking. For now those are dumb redirections to
existing RCU calls.
[ paulmck: Apply kernel test robot feedback. ]
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Paul Gortmaker<paul.gortmaker@windriver.com>
Cc: Alex Belits <abelits@marvell.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Since commit 788961462f ("ARM: psci: cpuidle: Enable PSCI CPUidle
driver") the generic ARM cpuidle driver doesn't probe anymore because
arm_cpuidle_init() will always return -EOPNOTSUPP. That is, because the
mentioned commit removes the only .cpu_suspend and .cpu_init_idle
provider.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20220529181329.2345722-2-michael@walle.cc
Signed-off-by: Will Deacon <will@kernel.org>
Add trace points as are implemented in KVM host halt polling.
This helps tune guest halt polling params.
Signed-off-by: Eiichi Tsukata <eiichi.tsukata@nutanix.com>
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Based on the normalized pattern:
this file is licensed under the terms of the gnu general public
license version 2 this program is licensed as is without any warranty
of any kind whether express or implied
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marge Energy Model support updates and cpuidle updates for 5.19-rc1:
- Update the Energy Model support code to allow the Energy Model to be
artificial, which means that the power values may not be on a uniform
scale with other devices providing power information, and update the
cpufreq_cooling and devfreq_cooling thermal drivers to support
artificial Energy Models (Lukasz Luba).
- Make DTPM check the Energy Model type (Lukasz Luba).
- Fix policy counter decrementation in cpufreq if Energy Model is in
use (Pierre Gondois).
- Add AlderLake processor support to the intel_idle driver (Zhang Rui).
- Fix regression leading to no genpd governor in the PSCI cpuidle
driver and fix the riscv-sbi cpuidle driver to allow a genpd
governor to be used (Ulf Hansson).
* pm-em:
PM: EM: Decrement policy counter
powercap: DTPM: Check for Energy Model type
thermal: cooling: Check Energy Model type in cpufreq_cooling and devfreq_cooling
Documentation: EM: Add artificial EM registration description
PM: EM: Remove old debugfs files and print all 'flags'
PM: EM: Change the order of arguments in the .active_power() callback
PM: EM: Use the new .get_cost() callback while registering EM
PM: EM: Add artificial EM flag
PM: EM: Add .get_cost() callback
* pm-cpuidle:
cpuidle: riscv-sbi: Fix code to allow a genpd governor to be used
cpuidle: psci: Fix regression leading to no genpd governor
intel_idle: Add AlderLake support
Merge PM core changes, updates related to system sleep and power capping
updates for 5.19-rc1:
- Export dev_pm_ops instead of suspend() and resume() in the IIO
chemical scd30 driver (Jonathan Cameron).
- Add namespace variants of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and
PM-runtime counterparts (Jonathan Cameron).
- Move symbol exports in the IIO chemical scd30 driver into the
IIO_SCD30 namespace (Jonathan Cameron).
- Avoid device PM-runtime usage count underflows (Rafael Wysocki).
- Allow dynamic debug to control printing of PM messages (David
Cohen).
- Fix some kernel-doc comments in hibernation code (Yang Li, Haowen
Bai).
- Preserve ACPI-table override during hibernation (Amadeusz Sławiński).
- Improve support for suspend-to-RAM for PSCI OSI mode (Ulf Hansson).
- Make Intel RAPL power capping driver support the RaptorLake and
AlderLake N processors (Zhang Rui, Sumeet Pawnikar).
- Remove redundant store to value after multiply in the RAPL power
capping driver (Colin Ian King).
* pm-core:
PM: runtime: Avoid device usage count underflows
iio: chemical: scd30: Move symbol exports into IIO_SCD30 namespace
PM: core: Add NS varients of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and runtime pm equiv
iio: chemical: scd30: Export dev_pm_ops instead of suspend() and resume()
* pm-sleep:
cpuidle: PSCI: Improve support for suspend-to-RAM for PSCI OSI mode
PM: runtime: Allow to call __pm_runtime_set_status() from atomic context
PM: hibernate: Don't mark comment as kernel-doc
x86/ACPI: Preserve ACPI-table override during hibernation
PM: hibernate: Fix some kernel-doc comments
PM: sleep: enable dynamic debug support within pm_pr_dbg()
PM: sleep: Narrow down -DDEBUG on kernel/power/ files
* powercap:
powercap: intel_rapl: remove redundant store to value after multiply
powercap: intel_rapl: add support for ALDERLAKE_N
powercap: RAPL: Add Power Limit4 support for RaptorLake
powercap: intel_rapl: add support for RaptorLake
The intent is to use a genpd governor when there are some states that needs
to be managed. Although, the current code ends up to never assign a
governor, let's fix this.
Fixes: 6abf32f1d9 ("cpuidle: Add RISC-V SBI CPU idle driver")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
While factoring out the PM domain related code from PSCI domain driver into
a set of library functions, a regression when initializing the genpds got
introduced. More precisely, we fail to assign a genpd governor, so let's
fix this.
Fixes: 9d976d6721 ("cpuidle: Factor-out power domain related code from PSCI domain driver")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add <asm/smp.h> for cpuid_to_hartid_map etc.
This is needed for both SMP and non-SMP builds, but not having it
causes a build error for non-SMP:
drivers/cpuidle/cpuidle-riscv-sbi.c: In function 'sbi_cpuidle_init_cpu':
drivers/cpuidle/cpuidle-riscv-sbi.c:350:26: error: implicit declaration of function 'cpuid_to_hartid_map' [-Werror=implicit-function-declaration]
Fixes: 6abf32f1d9 ("cpuidle: Add RISC-V SBI CPU idle driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
When PSCI OSI mode is supported the syscore flag is set for the CPU devices
that becomes attached to their PM domains (genpds). In the suspend-to-idle
case, we call dev_pm_genpd_suspend|resume() to allow genpd to properly
manage the power-off/on operations (pick an idlestate and manage the on/off
notifications).
For suspend-to-ram, dev_pm_genpd_suspend|resume() is currently not being
called, which causes a problem that the genpd on/off notifiers do not get
sent as expected. This prevents the platform-specific operations from being
executed, typically needed just before/after the boot CPU is being turned
off/on.
To deal with this problem, let's register a syscore ops for cpuidle-psci
when PSCI OSI mode is being used and call dev_pm_genpd_suspend|resume()
from them. In this way, genpd regains control of the PM domain topology and
then sends the on/off notifications when it's appropriate.
Reported-by: Maulik Shah <quic_mkshah@quicinc.com>
Suggested-by: Maulik Shah <quic_mkshah@quicinc.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Maulik Shah <quic_mkshah@quicinc.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This series adds RISC-V CPU Idle support using SBI HSM suspend function.
The RISC-V SBI CPU idle driver added by this series is highly inspired
from the ARM PSCI CPU idle driver.
Special thanks Sandeep Tripathy for providing early feeback on SBI HSM
support in all above projects (RISC-V SBI specification, OpenSBI, and
Linux RISC-V).
* palmer/riscv-idle:
RISC-V: Enable RISC-V SBI CPU Idle driver for QEMU virt machine
dt-bindings: Add common bindings for ARM and RISC-V idle states
cpuidle: Add RISC-V SBI CPU idle driver
cpuidle: Factor-out power domain related code from PSCI domain driver
RISC-V: Add SBI HSM suspend related defines
RISC-V: Add arch functions for non-retentive suspend entry/exit
RISC-V: Rename relocate() and make it global
RISC-V: Enable CPU_IDLE drivers
There are a few separately maintained driver subsystems that we merge through
the SoC tree, notable changes are:
- Memory controller updates, mainly for Tegra and Mediatek SoCs,
and clarifications for the memory controller DT bindings
- SCMI firmware interface updates, in particular a new transport based
on OPTEE and support for atomic operations.
- Cleanups to the TEE subsystem, refactoring its memory management
For SoC specific drivers without a separate subsystem, changes include
- Smaller updates and fixes for TI, AT91/SAMA5, Qualcomm and NXP
Layerscape SoCs.
- Driver support for Microchip SAMA5D29, Tesla FSD, Renesas RZ/G2L,
and Qualcomm SM8450.
- Better power management on Mediatek MT81xx, NXP i.MX8MQ
and older NVIDIA Tegra chips
-----BEGIN PGP SIGNATURE-----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=Cfbk
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"There are a few separately maintained driver subsystems that we merge
through the SoC tree, notable changes are:
- Memory controller updates, mainly for Tegra and Mediatek SoCs, and
clarifications for the memory controller DT bindings
- SCMI firmware interface updates, in particular a new transport
based on OPTEE and support for atomic operations.
- Cleanups to the TEE subsystem, refactoring its memory management
For SoC specific drivers without a separate subsystem, changes include
- Smaller updates and fixes for TI, AT91/SAMA5, Qualcomm and NXP
Layerscape SoCs.
- Driver support for Microchip SAMA5D29, Tesla FSD, Renesas RZ/G2L,
and Qualcomm SM8450.
- Better power management on Mediatek MT81xx, NXP i.MX8MQ and older
NVIDIA Tegra chips"
* tag 'arm-drivers-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (154 commits)
ARM: spear: fix typos in comments
soc/microchip: fix invalid free in mpfs_sys_controller_delete
soc: s4: Add support for power domains controller
dt-bindings: power: add Amlogic s4 power domains bindings
ARM: at91: add support in soc driver for new SAMA5D29
soc: mediatek: mmsys: add sw0_rst_offset in mmsys driver data
dt-bindings: memory: renesas,rpc-if: Document RZ/V2L SoC
memory: emif: check the pointer temp in get_device_details()
memory: emif: Add check for setup_interrupts
dt-bindings: arm: mediatek: mmsys: add support for MT8186
dt-bindings: mediatek: add compatible for MT8186 pwrap
soc: mediatek: pwrap: add pwrap driver for MT8186 SoC
soc: mediatek: mmsys: add mmsys reset control for MT8186
soc: mediatek: mtk-infracfg: Disable ACP on MT8192
soc: ti: k3-socinfo: Add AM62x JTAG ID
soc: mediatek: add MTK mutex support for MT8186
soc: mediatek: mmsys: add mt8186 mmsys routing table
soc: mediatek: pm-domains: Add support for mt8186
dt-bindings: power: Add MT8186 power domains
soc: mediatek: pm-domains: Add support for mt8195
...
The RISC-V SBI HSM extension provides HSM suspend call which can
be used by Linux RISC-V to enter platform specific low-power state.
This patch adds a CPU idle driver based on RISC-V SBI calls which
will populate idle states from device tree and use SBI calls to
entry these idle states.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Acked-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The generic power domain related code in PSCI domain driver is largely
independent of PSCI and can be shared with RISC-V SBI domain driver
hence we factor-out this code into dt_idle_genpd.c and dt_idle_genpd.h.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Call cpuidle_poll_state_init() only if it is needed to avoid doing
useless work.
Signed-off-by: Li RongQing <lirongqing@baidu.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
qcom_scm_set_cold/warm_boot_addr() currently take a cpumask parameter,
but it's not very useful because at the end we always set the same entry
address for all CPUs. This also allows speeding up probe of
cpuidle-qcom-spm a bit because only one SCM call needs to be made to
the TrustZone firmware, instead of one per CPU.
The main reason for this change is that it allows implementing the
"multi-cluster" variant of the set_boot_addr() call more easily
without having to rely on functions that break in certain build
configurations or that are not exported to modules.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211201130505.257379-4-stephan@gerhold.net
At the moment, the "qcom-spm-cpuidle" platform device is always created,
even if none of the CPUs is actually managed by the SPM. On non-qcom
platforms this will result in infinite probe-deferral due to the
failing qcom_scm_is_available() call.
To avoid this, look through the CPU DT nodes and check if there is
actually any CPU managed by a SPM (as indicated by the qcom,saw property).
It should also be available because e.g. MSM8916 has qcom,saw defined
but it's typically not enabled with ARM64/PSCI firmwares.
This is needed in preparation of a follow-up change that calls
qcom_scm_set_warm_boot_addr() a single time before registering any
cpuidle drivers. Otherwise this call might be made even on devices
that have this driver enabled but actually make use of PSCI.
Fixes: 60f3692b5f ("cpuidle: qcom_spm: Detach state machine from main SPM handling")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/86e3e09f-a8d7-3dff-3fc6-ddd7d30c5d78@samsung.com/
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211201130505.257379-2-stephan@gerhold.net
There are currently 2 ways to create a set of sysfs files for a
kobj_type, through the default_attrs field, and the default_groups
field. Move the cpuidle sysfs code to use default_groups field which
has been the preferred way since aa30f47cf6 ("kobject: Add support for
default attribute groups to kobj_type") so that we can soon get rid of
the obsolete default_attrs field.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix function name in sysfs.c kernel-doc comment
to remove a warning found by running scripts/kernel-doc,
which is caused by using 'make W=1'.
drivers/cpuidle/sysfs.c:512: warning: expecting prototype for
cpuidle_remove_driver_sysfs(). Prototype was for
cpuidle_remove_state_sysfs() instead
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The word `these' in a comment is repeated, so drop one.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
These are all the driver updates for SoC specific drivers. There
are a couple of subsystems with individual maintainers picking up
their patches here:
- The reset controller subsystem add support for a few new SoC
variants to existing drivers, along with other minor improvements
- The OP-TEE subsystem gets a driver for the ARM FF-A transport
- The memory controller subsystem has improvements for Tegra,
Mediatek, Renesas, Freescale and Broadcom specific drivers.
- The tegra cpuidle driver changes get merged through this
tree this time. There are only minor changes, but they depend
on other tegra driver updates here.
- The ep93xx platform finally moves to using the drivers/clk/
subsystem, moving the code out of arch/arm in the process.
This depends on a small sound driver change that is included
here as well.
- There are some minor updates for Qualcomm and Tegra specific
firmware drivers.
The other driver updates are mainly for drivers/soc, which contains
a mixture of vendor specific drivers that don't really fit elsewhere:
- Mediatek drivers gain more support for MT8192, with new support for
hw-mutex and mmsys routing, plus support for reset lines in the
mmsys driver.
- Qualcomm gains a new "sleep stats" driver, and support for
the "Generic Packet Router" in the APR driver.
- There is a new user interface for routing the UARTS on ASpeed
BMCs, something that apparently nobody else has needed so far.
- More drivers can now be built as loadable modules, in particular
for Broadcom and Samsung platforms.
- Lots of improvements to the TI sysc driver for better suspend/resume
support
Finally, there are lots of minor cleanups and new device IDs for
amlogic, renesas, tegra, qualcomm, mediateka, samsung, imx, layerscape,
allwinner, broadcom, and omap.
-----BEGIN PGP SIGNATURE-----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=tUuj
-----END PGP SIGNATURE-----
Merge tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"These are all the driver updates for SoC specific drivers. There are a
couple of subsystems with individual maintainers picking up their
patches here:
- The reset controller subsystem add support for a few new SoC
variants to existing drivers, along with other minor improvements
- The OP-TEE subsystem gets a driver for the ARM FF-A transport
- The memory controller subsystem has improvements for Tegra,
Mediatek, Renesas, Freescale and Broadcom specific drivers.
- The tegra cpuidle driver changes get merged through this tree this
time. There are only minor changes, but they depend on other tegra
driver updates here.
- The ep93xx platform finally moves to using the drivers/clk/
subsystem, moving the code out of arch/arm in the process. This
depends on a small sound driver change that is included here as
well.
- There are some minor updates for Qualcomm and Tegra specific
firmware drivers.
The other driver updates are mainly for drivers/soc, which contains a
mixture of vendor specific drivers that don't really fit elsewhere:
- Mediatek drivers gain more support for MT8192, with new support for
hw-mutex and mmsys routing, plus support for reset lines in the
mmsys driver.
- Qualcomm gains a new "sleep stats" driver, and support for the
"Generic Packet Router" in the APR driver.
- There is a new user interface for routing the UARTS on ASpeed BMCs,
something that apparently nobody else has needed so far.
- More drivers can now be built as loadable modules, in particular
for Broadcom and Samsung platforms.
- Lots of improvements to the TI sysc driver for better
suspend/resume support"
Finally, there are lots of minor cleanups and new device IDs for
amlogic, renesas, tegra, qualcomm, mediateka, samsung, imx,
layerscape, allwinner, broadcom, and omap"
* tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (179 commits)
optee: Fix spelling mistake "reclain" -> "reclaim"
Revert "firmware: qcom: scm: Add support for MC boot address API"
qcom: spm: allow compile-testing
firmware: arm_ffa: Remove unused 'compat_version' variable
soc: samsung: exynos-chipid: add exynosautov9 SoC support
firmware: qcom: scm: Don't break compile test on non-ARM platforms
soc: qcom: smp2p: Add of_node_put() before goto
soc: qcom: apr: Add of_node_put() before return
soc: qcom: qcom_stats: Fix client votes offset
soc: qcom: rpmhpd: fix sm8350_mxc's peer domain
dt-bindings: arm: cpus: Document qcom,msm8916-smp enable-method
ARM: qcom: Add qcom,msm8916-smp enable-method identical to MSM8226
firmware: qcom: scm: Add support for MC boot address API
soc: qcom: spm: Add 8916 SPM register data
dt-bindings: soc: qcom: spm: Document qcom,msm8916-saw2-v3.0-cpu
soc: qcom: socinfo: Add PM8150C and SMB2351 models
firmware: qcom_scm: Fix error retval in __qcom_scm_is_call_available()
soc: aspeed: Add UART routing support
soc: fsl: dpio: rename the enqueue descriptor variable
soc: fsl: dpio: use an explicit NULL instead of 0
...
This drops the use of power-domains for exposing the load_state from the
QMP driver to clients, to avoid issues related to system suspend.
SMP2P becomes wakeup capable, to allow dying remoteprocs to wake up
Linux from suspend to perform recovery.
It adds RPM power-domain support for SM6350 and MSM8953 and base RPM
support for MSM8953 and QCM2290.
It adds support for MSM8996, SDM630 and SDM660 in the SPM driver, which
will enable the introduction of proper voltage scaling of the CPU
subsystem.
Support for releasing secondary CPUs on MSM8226 is introduced.
The Asynchronous Packet Router (APR) driver is extended to support the
new Generic Packet Router (GPR) variant, which is used to communicate
with the firmware in the new AudioReach audio driver.
Lastly it transitions a number of drivers to safer string functions, as
well as switching things to use devm_platform_ioremap_resource().
-----BEGIN PGP SIGNATURE-----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=FE4j
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=LLU7
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
Qualcomm driver updates for v5.16
This drops the use of power-domains for exposing the load_state from the
QMP driver to clients, to avoid issues related to system suspend.
SMP2P becomes wakeup capable, to allow dying remoteprocs to wake up
Linux from suspend to perform recovery.
It adds RPM power-domain support for SM6350 and MSM8953 and base RPM
support for MSM8953 and QCM2290.
It adds support for MSM8996, SDM630 and SDM660 in the SPM driver, which
will enable the introduction of proper voltage scaling of the CPU
subsystem.
Support for releasing secondary CPUs on MSM8226 is introduced.
The Asynchronous Packet Router (APR) driver is extended to support the
new Generic Packet Router (GPR) variant, which is used to communicate
with the firmware in the new AudioReach audio driver.
Lastly it transitions a number of drivers to safer string functions, as
well as switching things to use devm_platform_ioremap_resource().
* tag 'qcom-drivers-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (40 commits)
soc: qcom: apr: Add GPR support
soc: dt-bindings: qcom: add gpr bindings
soc: qcom: apr: make code more reuseable
soc: dt-bindings: qcom: apr: deprecate qcom,apr-domain property
soc: dt-bindings: qcom: apr: convert to yaml
dt-bindings: soc: qcom: aoss: Delete unused power-domain definitions
dt-bindings: msm/dp: Remove aoss-qmp header
soc: qcom: aoss: Drop power domain support
dt-bindings: soc: qcom: aoss: Drop the load state power-domain
soc: qcom: smp2p: Add wakeup capability to SMP2P IRQ
dt-bindings: power: rpmpd: Add SM6350 to rpmpd binding
dt-bindings: soc: qcom: aoss: Add SM6350 compatible
soc: qcom: llcc: Disable MMUHWT retention
soc: qcom: smd-rpm: Add QCM2290 compatible
dt-bindings: soc: qcom: smd-rpm: Add QCM2290 compatible
firmware: qcom_scm: Add compatible for MSM8953 SoC
dt-bindings: firmware: qcom-scm: Document msm8953 bindings
soc: qcom: pdr: Prefer strscpy over strcpy
soc: qcom: rpmh-rsc: Make use of the helper function devm_platform_ioremap_resource_byname()
soc: qcom: gsbi: Make use of the helper function devm_platform_ioremap_resource()
...
Link: https://lore.kernel.org/r/20211012173442.1017010-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Check whether PMC is ready before proceeding with the cpuidle registration.
This fixes racing with the PMC driver probe order, which results in a
disabled deepest CC6 idling state if cpuidle driver is probed before the
PMC.
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Commit c343bf1ba5 ("cpuidle: Fix three reference count leaks")
fixes the cleanup of kobjects; however, it removes kfree() calls
altogether, leading to memory leaks.
Fix those and also defer the initialization of dev->kobj_dev until
after the error check, so that we do not end up with a dangling
pointer.
Fixes: c343bf1ba5 ("cpuidle: Fix three reference count leaks")
Signed-off-by: Anel Orazgaliyeva <anelkz@amazon.de>
Suggested-by: Aman Priyadarshi <apeureka@amazon.de>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In commit a871be6b8e ("cpuidle: Convert Qualcomm SPM driver to a generic
CPUidle driver") the SPM driver has been converted to a
generic CPUidle driver: that was mainly made to simplify the
driver and that was a great accomplishment;
Though, at that time, this driver was only applicable to ARM 32-bit SoCs,
lacking logic about the handling of newer generation SAW.
In preparation for the enablement of SPM features on AArch64/ARM64,
split the cpuidle-qcom-spm driver in two: the CPUIdle related
state machine (currently used only on ARM SoCs) stays there, while
the SPM communication handling lands back in soc/qcom/spm.c and
also making sure to not discard the simplifications that were
introduced in the aforementioned commit.
Since now the "two drivers" are split, the SCM dependency in the
main SPM handling is gone and for this reason it was also possible
to move the SPM initialization early: this will also make sure that
whenever the SAW CPUIdle driver is getting initialized, the SPM
driver will be ready to do the job.
Please note that the anticipation of the SPM initialization was
also done to optimize the boot times on platforms that have their
CPU/L2 idle states managed by other means (such as PSCI), while
needing SAW initialization for other purposes, like AVS control.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210729155609.608159-2-angelogioacchino.delregno@somainline.org
- Add support for registering devices via MFD cells to Simple MFD (I2C)
- New Drivers
- Add support for Renesas Synchronization Management Unit (SMU)
- New Device Support
- Add support for N5010 to Intel M10 BMC
- Add support for Cannon Lake to Intel LPSS ACPI
- Add support for Samsung SSG{1,2} to ST-Ericsson's U8500 family
- Add support for TQMx110EB and TQMxE40x to TQ-Systems PLD TQMx86
- New Functionality
- Add support for GPIO to Intel LPC ICH
- Add support for Reset to Texas Instruments TPS65086
- Fix-ups
- Trivial, sorting, whitespace, renaming, etc; mt6360-core, db8500-prcmu-regs, tqmx86
- Device Tree fiddling; syscon, axp20x, qcom,pm8008, ti,tps65086, brcm,cru
- Use proper APIs for IRQ map resolution; ab8500-core, stmpe, tc3589x, wm8994-irq
- Pass 'supplied-from' property through axp288_fuel_gauge via swnode
- Remove unused file entry; MAINTAINERS
- Make interrupt line optional; tps65086
- Rename db8500-cpuidle driver symbol; db8500-prcmu
- Remove support for unused hardware; tqmx86
- Provide a standard LPC clock frequency for unknown boards; tqmx86
- Remove unused code; ti_am335x_tscadc
- Use of_iomap() instead of ioremap(); syscon
- Bug Fixes
- Clear GPIO IRQ resource flags when no IRQ is set; tqmx86
- Fix incorrect/misleading frequencies; db8500-prcmu
- Mitigate namespace clash with other GPIOBASE users
-----BEGIN PGP SIGNATURE-----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=7Zv8
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Frameworks:
- Add support for registering devices via MFD cells to Simple MFD (I2C)
New Drivers:
- Add support for Renesas Synchronization Management Unit (SMU)
New Device Support:
- Add support for N5010 to Intel M10 BMC
- Add support for Cannon Lake to Intel LPSS ACPI
- Add support for Samsung SSG{1,2} to ST-Ericsson's U8500 family
- Add support for TQMx110EB and TQMxE40x to TQ-Systems PLD TQMx86
New Functionality:
- Add support for GPIO to Intel LPC ICH
- Add support for Reset to Texas Instruments TPS65086
Fix-ups:
- Trivial, sorting, whitespace, renaming, etc; mt6360-core, db8500-prcmu-regs, tqmx86
- Device Tree fiddling; syscon, axp20x, qcom,pm8008, ti,tps65086, brcm,cru
- Use proper APIs for IRQ map resolution; ab8500-core, stmpe, tc3589x, wm8994-irq
- Pass 'supplied-from' property through axp288_fuel_gauge via swnode
- Remove unused file entry; MAINTAINERS
- Make interrupt line optional; tps65086
- Rename db8500-cpuidle driver symbol; db8500-prcmu
- Remove support for unused hardware; tqmx86
- Provide a standard LPC clock frequency for unknown boards; tqmx86
- Remove unused code; ti_am335x_tscadc
- Use of_iomap() instead of ioremap(); syscon
Bug Fixes:
- Clear GPIO IRQ resource flags when no IRQ is set; tqmx86
- Fix incorrect/misleading frequencies; db8500-prcmu
- Mitigate namespace clash with other GPIOBASE users"
* tag 'mfd-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (31 commits)
mfd: lpc_sch: Rename GPIOBASE to prevent build error
mfd: syscon: Use of_iomap() instead of ioremap()
dt-bindings: mfd: Add Broadcom CRU
mfd: ti_am335x_tscadc: Delete superfluous error message
mfd: tqmx86: Assume 24MHz LPC clock for unknown boards
mfd: tqmx86: Add support for TQ-Systems DMI IDs
mfd: tqmx86: Add support for TQMx110EB and TQMxE40x
mfd: tqmx86: Fix typo in "platform"
mfd: tqmx86: Remove incorrect TQMx90UC board ID
mfd: tqmx86: Clear GPIO IRQ resource when no IRQ is set
mfd: simple-mfd-i2c: Add support for registering devices via MFD cells
mfd/cpuidle: ux500: Rename driver symbol
mfd: tps65086: Add cell entry for reset driver
mfd: tps65086: Make interrupt line optional
dt-bindings: mfd: Convert tps65086.txt to YAML
MAINTAINERS: Adjust ARM/NOMADIK/Ux500 ARCHITECTURES to file renaming
mfd: db8500-prcmu: Handle missing FW variant
mfd: db8500-prcmu: Rename register header
mfd: axp20x: Add supplied-from property to axp288_fuel_gauge cell
mfd: Don't use irq_create_mapping() to resolve a mapping
...
- Convert pseries & powernv to use MSI IRQ domains.
- Rework the pseries CPU numbering so that CPUs that are removed, and later re-added, are
given a CPU number on the same node as previously, when possible.
- Add support for a new more flexible device-tree format for specifying NUMA distances.
- Convert powerpc to GENERIC_PTDUMP.
- Retire sbc8548 and sbc8641d board support.
- Various other small features and fixes.
Thanks to: Alexey Kardashevskiy, Aneesh Kumar K.V, Anton Blanchard, Cédric Le Goater,
Christophe Leroy, Emmanuel Gil Peyrot, Fabiano Rosas, Fangrui Song, Finn Thain, Gautham R.
Shenoy, Hari Bathini, Joel Stanley, Jordan Niethe, Kajol Jain, Laurent Dufour, Leonardo
Bras, Lukas Bulwahn, Marc Zyngier, Masahiro Yamada, Michal Suchanek, Nathan Chancellor,
Nicholas Piggin, Parth Shah, Paul Gortmaker, Pratik R. Sampat, Randy Dunlap, Sebastian
Andrzej Siewior, Srikar Dronamraju, Wan Jiabing, Xiongwei Song, Zheng Yongjun.
-----BEGIN PGP SIGNATURE-----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=EbN0
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Convert pseries & powernv to use MSI IRQ domains.
- Rework the pseries CPU numbering so that CPUs that are removed, and
later re-added, are given a CPU number on the same node as
previously, when possible.
- Add support for a new more flexible device-tree format for specifying
NUMA distances.
- Convert powerpc to GENERIC_PTDUMP.
- Retire sbc8548 and sbc8641d board support.
- Various other small features and fixes.
Thanks to Alexey Kardashevskiy, Aneesh Kumar K.V, Anton Blanchard,
Cédric Le Goater, Christophe Leroy, Emmanuel Gil Peyrot, Fabiano Rosas,
Fangrui Song, Finn Thain, Gautham R. Shenoy, Hari Bathini, Joel
Stanley, Jordan Niethe, Kajol Jain, Laurent Dufour, Leonardo Bras, Lukas
Bulwahn, Marc Zyngier, Masahiro Yamada, Michal Suchanek, Nathan
Chancellor, Nicholas Piggin, Parth Shah, Paul Gortmaker, Pratik R.
Sampat, Randy Dunlap, Sebastian Andrzej Siewior, Srikar Dronamraju, Wan
Jiabing, Xiongwei Song, and Zheng Yongjun.
* tag 'powerpc-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (154 commits)
powerpc/bug: Cast to unsigned long before passing to inline asm
powerpc/ptdump: Fix generic ptdump for 64-bit
KVM: PPC: Fix clearing never mapped TCEs in realmode
powerpc/pseries/iommu: Rename "direct window" to "dma window"
powerpc/pseries/iommu: Make use of DDW for indirect mapping
powerpc/pseries/iommu: Find existing DDW with given property name
powerpc/pseries/iommu: Update remove_dma_window() to accept property name
powerpc/pseries/iommu: Reorganize iommu_table_setparms*() with new helper
powerpc/pseries/iommu: Add ddw_property_create() and refactor enable_ddw()
powerpc/pseries/iommu: Allow DDW windows starting at 0x00
powerpc/pseries/iommu: Add ddw_list_new_entry() helper
powerpc/pseries/iommu: Add iommu_pseries_alloc_table() helper
powerpc/kernel/iommu: Add new iommu_table_in_use() helper
powerpc/pseries/iommu: Replace hard-coded page shift
powerpc/numa: Update cpu_cpu_map on CPU online/offline
powerpc/numa: Print debug statements only when required
powerpc/numa: convert printk to pr_xxx
powerpc/numa: Drop dbg in favour of pr_debug
powerpc/smp: Enable CACHE domain for shared processor
powerpc/smp: Update cpu_core_map on all PowerPc systems
...
The PRCMU driver defines this as a DT node but there are no bindings
for it and it needs no data from the device tree. Just spawn the
device directly in the same way as the watchdog.
Name it "db8500-cpuidle" since there are no ambitions to support any
more SoCs than this one.
This rids this annoying boot message:
[ 0.032610] cpuidle-dbx500: Failed to locate of_node [id: 0]
However I think the device still spawns and work just fine, despite
not finding a device tree node.
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: linux-pm@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
After commit 7cbd631d4dec ("cpuidle: pseries: Fixup CEDE0 latency only
for POWER10 onwards"), pseries_idle_probe() is no longer inlined when
compiling with clang, which causes a modpost warning:
WARNING: modpost: vmlinux.o(.text+0xc86a54): Section mismatch in
reference from the function pseries_idle_probe() to the function
.init.text:fixup_cede0_latency()
The function pseries_idle_probe() references
the function __init fixup_cede0_latency().
This is often because pseries_idle_probe lacks a __init
annotation or the annotation of fixup_cede0_latency is wrong.
pseries_idle_probe() is a non-init function, which calls
fixup_cede0_latency(), which is an init function, explaining the
mismatch. pseries_idle_probe() is only called from
pseries_processor_idle_init(), which is an init function, so mark
pseries_idle_probe() as __init so there is no more warning.
Fixes: 054e44ba99 ("cpuidle: pseries: Add function to parse extended CEDE records")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210803211547.1093820-1-nathan@kernel.org
Rename two local variables in teo_select() so that their names better
reflect their purpose.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There are three mistakes in the loop in teo_select() that is looking
for an alternative candidate idle state. First, it should walk all
of the idle states shallower than the current candidate one,
including all of the disabled ones, but it terminates after the first
enabled idle state. Second, it should not terminate its last step
if idle state 0 is disabled (which is related to the first issue).
Finally, it may return the current alternative candidate idle state
prematurely if the time span criterion is not met by the idle state
under consideration at the moment.
To address the issues mentioned above, make the loop in question walk
all of the idle states shallower than the current candidate idle state
all the way down to idle state 0 and rearrange the checks in it.
Fixes: 77577558f2 ("cpuidle: teo: Rework most recent idle duration values treatment")
Reported-by: Doug Smythies <dsmythies@telus.net>
Tested-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently in fixup_cede0_latency() code, we perform the fixup the
CEDE(0) exit latency value only if minimum advertized extended CEDE
latency values are less than 10us. This was done so as to not break
the expected behaviour on POWER8 platforms where the advertised
latency was higher than the default 10us, which would delay the SMT
folding on the core.
However, after the earlier patch "cpuidle/pseries: Fixup CEDE0 latency
only for POWER10 onwards", we can be sure that the fixup of CEDE0
latency is going to happen only from POWER10 onwards. Hence
unconditionally use the minimum exit latency provided by the platform.
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1626676399-15975-3-git-send-email-ego@linux.vnet.ibm.com
Commit d947fb4c96 ("cpuidle: pseries: Fixup exit latency for
CEDE(0)") sets the exit latency of CEDE(0) based on the latency values
of the Extended CEDE states advertised by the platform
On POWER9 LPARs, the firmwares advertise a very low value of 2us for
CEDE1 exit latency on a Dedicated LPAR. The latency advertized by the
PHYP hypervisor corresponds to the latency required to wakeup from the
underlying hardware idle state. However the wakeup latency from the
LPAR perspective should include
1. The time taken to transition the CPU from the Hypervisor into the
LPAR post wakeup from platform idle state
2. Time taken to send the IPI from the source CPU (waker) to the idle
target CPU (wakee).
1. can be measured via timer idle test, where we queue a timer, say
for 1ms, and enter the CEDE state. When the timer fires, in the timer
handler we compute how much extra timer over the expected 1ms have we
consumed. On a a POWER9 LPAR the numbers are
CEDE latency measured using a timer (numbers in ns)
N Min Median Avg 90%ile 99%ile Max Stddev
400 2601 5677 5668.74 5917 6413 9299 455.01
1. and 2. combined can be determined by an IPI latency test where we
send an IPI to an idle CPU and in the handler compute the time
difference between when the IPI was sent and when the handler ran. We
see the following numbers on POWER9 LPAR.
CEDE latency measured using an IPI (numbers in ns)
N Min Median Avg 90%ile 99%ile Max Stddev
400 711 7564 7369.43 8559 9514 9698 1200.01
Suppose, we consider the 99th percentile latency value measured using
the IPI to be the wakeup latency, the value would be 9.5us This is in
the ballpark of the default value of 10us.
Hence, use the exit latency of CEDE(0) based on the latency values
advertized by platform only from POWER10 onwards. The values
advertized on POWER10 platforms is more realistic and informed by the
latency measurements. For earlier platforms stick to the default value
of 10us. The fix was suggested by Michael Ellerman.
Fixes: d947fb4c96 ("cpuidle: pseries: Fixup exit latency for CEDE(0)")
Reported-by: Enrico Joedecke <joedecke@de.ibm.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1626676399-15975-2-git-send-email-ego@linux.vnet.ibm.com
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmDRhckACgkQqDIjiipP
6E98lggAiMzuvF8eSvq+maQc787J8vfteM7UiSyexpdh/0GUqDOVM1CBxUV5MGoE
hRZe/hSW8PfgkZ7eGwe2bRnzSs60i6tQT9l2zkgdpuImlpCz/kZrEGkYjmP16zzM
81yVPpan4QgKWRMKI8A1SVdbkRvwmw9HuQxOyBcNaR9qlxjhYwt2Kihga80UjCUs
HkaKSP16JNkepmzCHBdaIyMW2cTlN8r+pCe8g5dBZ5hXwVCjcW7CGBxtQBzFgS8O
t5V06hkgvG619qfEgvipbCdOREgZgNz95alth5OIE4Ihqyb3N4u9xHC8Ah9AsQ/u
UAF1r0KClULdoVvGSIr+CnhOLCWb9A==
=doID
-----END PGP SIGNATURE-----
Merge tag 'cpuidle-v5.14-rc1' of https://git.linaro.org/people/daniel.lezcano/linux
Pull ARM cpuidle updates for v5.14 from Daniel Lezcano:
"- Add support for Qcom MSM8226 (Bartosz Dudziak)"
* tag 'cpuidle-v5.14-rc1' of https://git.linaro.org/people/daniel.lezcano/linux:
cpuidle: qcom: Add SPM register data for MSM8226
dt-bindings: arm: msm: Add SAW2 for MSM8226
- Make intel_pstate support hybrid processors using abstract
performance units in the HWP interface (Rafael Wysocki).
- Add Icelake servers and Cometlake support in no-HWP mode to
intel_pstate (Giovanni Gherdovich).
- Make cpufreq_online() error path be consistent with the CPU
device removal path in cpufreq (Rafael Wysocki).
- Clean up 3 cpufreq drivers and the statistics code (Hailong Liu,
Randy Dunlap, Shaokun Zhang).
- Make intel_idle use special idle state parameters for C6 when
package C-states are disabled (Chen Yu).
- Rework the TEO (timer events oriented) cpuidle governor to address
some theoretical shortcomings in it (Rafael Wysocki).
- Drop unneeded semicolon from the TEO governor (Wan Jiabing).
- Modify the runtime PM framework to accept unassigned suspend
and resume callback pointers (Ulf Hansson).
- Improve pm_runtime_get_sync() documentation (Krzysztof Kozlowski).
- Improve device performance states support in the generic power
domains (genpd) framework (Ulf Hansson).
- Fix some documentation issues in genpd (Yang Yingliang).
- Make the operating performance points (OPP) framework use the
required-opps DT property in use cases that are not related to
genpd (Hsin-Yi Wang).
- Make lazy_link_required_opp_table() use list_del_init instead of
list_del/INIT_LIST_HEAD (Yang Yingliang).
- Simplify wake IRQs handling in the core system-wide sleep support
code and clean up some coding style inconsistencies in it (Tian
Tao, Zhen Lei).
- Add cooling support to the tegra30 devfreq driver and improve its
DT bindings (Dmitry Osipenko).
- Fix some assorted issues in the devfreq core and drivers (Chanwoo
Choi, Dong Aisheng, YueHaibing).
-----BEGIN PGP SIGNATURE-----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=mgLK
-----END PGP SIGNATURE-----
Merge tag 'pm-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add hybrid processors support to the intel_pstate driver and
make it work with more processor models when HWP is disabled, make the
intel_idle driver use special C6 idle state paremeters when package
C-states are disabled, add cooling support to the tegra30 devfreq
driver, rework the TEO (timer events oriented) cpuidle governor,
extend the OPP (operating performance points) framework to use the
required-opps DT property in more cases, fix some issues and clean up
a number of assorted pieces of code.
Specifics:
- Make intel_pstate support hybrid processors using abstract
performance units in the HWP interface (Rafael Wysocki).
- Add Icelake servers and Cometlake support in no-HWP mode to
intel_pstate (Giovanni Gherdovich).
- Make cpufreq_online() error path be consistent with the CPU device
removal path in cpufreq (Rafael Wysocki).
- Clean up 3 cpufreq drivers and the statistics code (Hailong Liu,
Randy Dunlap, Shaokun Zhang).
- Make intel_idle use special idle state parameters for C6 when
package C-states are disabled (Chen Yu).
- Rework the TEO (timer events oriented) cpuidle governor to address
some theoretical shortcomings in it (Rafael Wysocki).
- Drop unneeded semicolon from the TEO governor (Wan Jiabing).
- Modify the runtime PM framework to accept unassigned suspend and
resume callback pointers (Ulf Hansson).
- Improve pm_runtime_get_sync() documentation (Krzysztof Kozlowski).
- Improve device performance states support in the generic power
domains (genpd) framework (Ulf Hansson).
- Fix some documentation issues in genpd (Yang Yingliang).
- Make the operating performance points (OPP) framework use the
required-opps DT property in use cases that are not related to
genpd (Hsin-Yi Wang).
- Make lazy_link_required_opp_table() use list_del_init instead of
list_del/INIT_LIST_HEAD (Yang Yingliang).
- Simplify wake IRQs handling in the core system-wide sleep support
code and clean up some coding style inconsistencies in it (Tian
Tao, Zhen Lei).
- Add cooling support to the tegra30 devfreq driver and improve its
DT bindings (Dmitry Osipenko).
- Fix some assorted issues in the devfreq core and drivers (Chanwoo
Choi, Dong Aisheng, YueHaibing)"
* tag 'pm-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (39 commits)
PM / devfreq: passive: Fix get_target_freq when not using required-opp
cpufreq: Make cpufreq_online() call driver->offline() on errors
opp: Allow required-opps to be used for non genpd use cases
cpuidle: teo: remove unneeded semicolon in teo_select()
dt-bindings: devfreq: tegra30-actmon: Add cooling-cells
dt-bindings: devfreq: tegra30-actmon: Convert to schema
PM / devfreq: userspace: Use DEVICE_ATTR_RW macro
PM: runtime: Clarify documentation when callbacks are unassigned
PM: runtime: Allow unassigned ->runtime_suspend|resume callbacks
PM: runtime: Improve path in rpm_idle() when no callback
PM: hibernate: remove leading spaces before tabs
PM: sleep: remove trailing spaces and tabs
PM: domains: Drop/restore performance state votes for devices at runtime PM
PM: domains: Return early if perf state is already set for the device
PM: domains: Split code in dev_pm_genpd_set_performance_state()
cpuidle: teo: Use kerneldoc documentation in admin-guide
cpuidle: teo: Rework most recent idle duration values treatment
cpuidle: teo: Change the main idle state selection logic
cpuidle: teo: Cosmetic modification of teo_select()
cpuidle: teo: Cosmetic modifications of teo_update()
...
Fix following coccicheck warning:
drivers/cpuidle/governors/teo.c:315:10-11: Unneeded semicolon
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There are two descriptions of the TEO (Timer Events Oriented) cpuidle
governor in the kernel source tree, one in the C file containing its
code and one in cpuidle.rst which is part of admin-guide.
Instead of trying to keep them both in sync and in order to reduce
text duplication, include the governor description from the C file
directly into cpuidle.rst.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The TEO (Timer Events Oriented) cpuidle governor uses several most
recent idle duration values for a given CPU to refine the idle state
selection in case the previous long-term trends have not been
followed recently and a new trend appears to be forming. That is
done by computing the average of the most recent idle duration
values falling below the time till the next timer event ("sleep
length"), provided that they are the majority of the most recent
idle duration values taken into account, and using it as the new
expected idle duration value.
However, idle state selection based on that value may not be optimal,
because the average does not really indicate which of the idle states
with target residencies less than or equal to it is likely to be the
best fit.
Thus, instead of computing the average, make the governor carry out
computations based on the distribution of the most recent idle
duration values among the bins corresponding to different idle
states. Namely, if the majority of the most recent idle duration
values taken into consideration are less than the current sleep
length (which means that the CPU is likely to wake up early), find
the idle state closest to the "candidate" one "matching" the sleep
length whose target residency is less than or equal to the majority
of the most recent idle duration values that have fallen below the
current sleep length (which means that it is likely to be "shallow
enough" this time).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Two aspects of the current main idle state selection logic in the
TEO (Timer Events Oriented) cpuidle governor are quite questionable.
First of all, the "hits" and "misses" metrics used by it are only
updated for a given idle state if the time till the next timer event
("sleep length") is between the target residency of that state and
the target residency of the next one. Consequently, they are likely
to become stale if the sleep length tends to fall outside that
interval which increases the likelihood of subomtimal idle state
selection.
Second, the decision on whether or not to select the idle state
"matching" the sleep length is based on the metrics collected for
that state alone, whereas in principle the metrics collected for
the other idle states should be taken into consideration when that
decision is made. For example, if the measured idle duration is less
than the target residency of the idle state "matching" the sleep
length, then it is also less than the target residency of any deeper
idle state and that should be taken into account when considering
whether or not to select any of those states, but currently it is
not.
In order to address the above shortcomings, modify the main idle
state selection logic in the TEO governor to take the metrics
collected for all of the idle states into account when deciding
whether or not to select the one "matching" the sleep length.
Moreover, drop the "misses" metric that becomes redundant after the
above change and rename the "early_hits" metric to "intercepts" so
that its role is better reflected by its name (the idea being that
if a CPU wakes up earlier than indicated by the sleep length, then
it must be a result of a non-timer interrupt that "intercepts" the
CPU).
Also rename the states[] array in struct struct teo_cpu to
state_bins[] to avoid confusing it with the states[] array in
struct cpuidle_driver and update the documentation to match the
new code (and make it more comprehensive while at it).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Initialize local variables in teo_select() where they are declared.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rename a local variable in teo_update() so that its purpose is better
reflected by its name and use one more local variable in the loop
over the CPU idle states in that function to make the code somewhat
easier to read.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Linus Torvalds