Add EFA driver ID to the IOCTL interface uapi. This patch also adds
unspecified node/transport type that will be used by EFA (usnic is left
unchanged as it's already part of our ABI).
Signed-off-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The drivers i40iw and bnxt_re no longer dependent on the hugetlb flag. So
remove this flag from ib_umem structure.
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This helper iterates over a DMA-mapped SGL and returns contiguous memory
blocks aligned to a HW supported page size.
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This helper iterates through the SG list to find the best page size to use
from a bitmap of HW supported page sizes. Drivers that support multiple
page sizes, but not mixed sizes in an MR can use this API.
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When there is active traffic through a GID, a QP/AH holds reference to
this GID entry. RoCE GID entry holds reference to its attached
netdevice. Due to this when netdevice is deleted by admin user, its
refcount is not dropped.
Therefore, while deleting RoCE GID, wait for all GID attribute's netdev
users to finish accessing netdev in rcu context. Once all users done
accessing it, release the netdev refcount.
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
To access the netdevice of the GID attribute, use an existing API
rdma_read_gid_attr_ndev_rcu().
This further reduces dependency on open access to netdevice of GID
attribute.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Instead of RoCE drivers figuring out vlan, smac fields while working on
QP/AH, provide a helper routine to read the L2 fields such as vlan_id and
source mac address.
This moves logic from mlx5 driver to core for wider usage for RoCE ports.
This is a preparation patch to allow detaching netdev in subsequent patch.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Integrate iw_cm_verbs data members into ib_device_ops and ib_device
structs, this is done to achieve the following:
1) Avoid memory related bugs durring error unwind
2) Make the code more cleaner
3) Reduce code duplication
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jason Gunthorpe says:
====================
Upon review it turns out there are some long standing problems in BAR
mapping area:
* BAR pages intended for read-only can be switched to writable via mprotect.
* Missing use of rdma_user_mmap_io for the mlx5 clock BAR page.
* Disassociate causes SIGBUS when touching the pages.
* CPU pages are being mapped through to the process via remap_pfn_range
instead of the more appropriate vm_insert_page, causing weird behaviors
during disassociation.
This series adds the missing VM_* flag manipulation, adds faulting a zero
page for disassociation and revises the CPU page mappings to use
vm_insert_page.
====================
For dependencies this branch is based on for-rc from
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git
* branch 'rdma_mmap':
RDMA: Remove rdma_user_mmap_page
RDMA/mlx5: Use get_zeroed_page() for clock_info
RDMA/ucontext: Fix regression with disassociate
RDMA/mlx5: Use rdma_user_map_io for mapping BAR pages
RDMA/mlx5: Do not allow the user to write to the clock page
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Upon further research drivers that want this should simply call the core
function vm_insert_page(). The VMA holds a reference on the page and it
will be automatically freed when the last reference drops. No need for
disassociate to sequence the cleanup.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The reference count adjustments on reference count completion
are open coded throughout.
Add a routine to do all reference count adjustments and use.
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The currently include file ordering for rdmavt headers has an
ab/ba include issue the precludes using inlines from rdma_vt.h
in rdmavt_qp.h.
At the heart of the issue is that rdma_vt.h includes rdmavt_qp.h.
Fix the ordering issue by adjusting rdma_vt.h to not require rdmavt_qp.h
and move qp related inlines to rdmavt_qp.h.
Additionally, promote rvt_mmap_info to rdma_vt.h since it is shared
by rdmavt_cq.h and rdmavt_qp.h.
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch fixes miscellaneous comment errors.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Convert SRQ allocation from drivers to be in the IB/core
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Simplify drivers by ensuring lifetime of ib_ah object. The changes
in .create_ah() go hand in hand with relevant update in .destroy_ah().
We will use this opportunity and convert .destroy_ah() to don't fail, as
it was suggested a long time ago, because there is nothing to do in case
of failure during destroy.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
AH objects are allocated in atomic context and those allocations should
be done with GFP_ATOMIC.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The ucontext and ufile should not be accessed via the uobject, all these
cases have an attrs so use that instead.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Combine contiguous regions of PAGE_SIZE pages into single scatter list
entry while building the scatter table for a umem. This minimizes the
number of the entries in the scatter list and reduces the DMA mapping
overhead, particularly with the IOMMU.
Set default max_seg_size in core for IB devices to 2G and do not combine
if we exceed this limit.
Also, purge npages in struct ib_umem as we now DMA map the umem SGL with
sg_nents and npage computation is not needed. Drivers should now be using
ib_umem_num_pages(), so fix the last stragglers.
Move npages tracking to ib_umem_odp as ODP drivers still need it.
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Adit Ranadive <aditr@vmware.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Tested-by: Gal Pressman <galpress@amazon.com>
Tested-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Now when ib_udata is passed to all the driver's object create/destroy APIs
the ib_udata will carry the ib_ucontext for every user command. There is
no need to also pass the ib_ucontext via the functions prototypes.
Make ib_udata the only argument psssed.
Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The uverbs_attr_bundle with the ucontext is sent down to the drivers ib_x
destroy path as ib_udata. The next patch will use the ib_udata to free the
drivers destroy path from the dependency in 'uobject->context' as we
already did for the create path.
Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Pass uverbs_attr_bundle down the uobject destroy path. The next patch will
use this to eliminate the dependecy of the drivers in ib_x->uobject
pointers.
Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
the Attempt to use the below commit to initialize the ucontext for the
uobject destroy path has shown that the below commit is incomplete.
Parts were reverted and the ucontext set up in the uverbs_attr_bundle was
moved to rdma_lookup_get_uobject which is called from the uobj_get_XXX
macros and rdma_alloc_begin_uobject which is called when uobject is
created.
Fixes: 3d9dfd0603 ("IB/uverbs: Add ib_ucontext to uverbs_attr_bundle sent from ioctl and cmd flows")
Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is no need to perform extra comparison after boolean AND.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Introduce an API rdma_dev_access_netns() to check whether a rdma device
can be accessed from the specified net namespace or not.
Use rdma_dev_access_netns() while opening character uverbs, umad network
device and also check while rdma cm_id binds to rdma device.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Implement compatibility layer sysfs entries of ib_core so that non
init_net net namespaces can also discover rdma devices.
Each non init_net net namespace has ib_core_device created in it.
Such ib_core_device sysfs tree resembles rdma devices found in
init_net namespace.
This allows discovering rdma devices in multiple non init_net net
namespaces via sysfs entries and helpful to rdma-core userspace.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In order to support sysfs entries in multiple net namespaces for a rdma
device, introduce a ib_core_device whose scope is limited to hold core
device and per port sysfs related entries.
This is preparation patch so that multiple ib_core_devices in each net
namespace can be created in subsequent patch who all can share ib_device.
(a) Move sysfs specific fields to ib_core_device.
(b) Make sysfs and device life cycle related routines to work on
ib_core_device.
(c) Introduce and use rdma_init_coredev() helper to initialize
coredev fields.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
"__attribute__" set of macros has been standardized, have became more
potentially portable and consistent code back in v2.6.21 by commit
82ddcb040 ("[PATCH] extend the set of "__attribute__" shortcut macros").
Moreover, nowadays checkpatch.pl warns about using __attribute__((packed))
instead of __packed.
This patch converts all the "__attribute__ ((packed))" annotations to
"__packed" within the RDMA subsystem.
Signed-off-by: Erez Alfasi <ereza@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Following the PD conversion patch, do the same for ucontext allocations.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add support for new LINK messages to allow adding and deleting rdma
interfaces. This will be used initially for soft rdma drivers which
instantiate device instances dynamically by the admin specifying a netdev
device to use. The rdma_rxe module will be the first user of these
messages.
The design is modeled after RTNL_NEWLINK/DELLINK: rdma drivers register
with the rdma core if they provide link add/delete functions. Each driver
registers with a unique "type" string, that is used to dispatch messages
coming from user space. A new RDMA_NLDEV_ATTR is defined for the "type"
string. User mode will pass 3 attributes in a NEWLINK message:
RDMA_NLDEV_ATTR_DEV_NAME for the desired rdma device name to be created,
RDMA_NLDEV_ATTR_LINK_TYPE for the "type" of link being added, and
RDMA_NLDEV_ATTR_NDEV_NAME for the net_device interface to use for this
link. The DELLINK message will contain the RDMA_NLDEV_ATTR_DEV_INDEX of
the device to delete.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Since rxe allows unregistration from other threads the rxe pointer can
become invalid any moment after ib_register_driver returns. This could
cause a user triggered use after free.
Add another driver callback to be called right after the device becomes
registered to complete any device setup required post-registration. This
callback has enough core locking to prevent the device from becoming
unregistered.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
These APIs are intended to support drivers that exist outside the usual
driver core probe()/remove() callbacks. Normally the driver core will
prevent remove() from running concurrently with probe(), once this safety
is lost drivers need more support to get the locking and lifetimes right.
ib_unregister_driver() is intended to be used during module_exit of a
driver using these APIs. It unregisters all the associated ib_devices.
ib_unregister_device_and_put() is to be used by a driver-specific removal
function (ie removal by name, removal from a netdev notifier, removal from
netlink)
ib_unregister_queued() is to be used from netdev notifier chains where
RTNL is held.
The locking is tricky here since once things become async it is possible
to race unregister with registration. This is largely solved by relying on
the registration refcount, unregistration will only ever work on something
that has a positive registration refcount - and then an unregistration
mutex serializes all competing unregistrations of the same device.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Several drivers need to find the ib_device from a given netdev. rxe needs
this at speed in an unsleepable context, so choose to implement the
translation using a RCU safe hash table.
The hash table can have a many to one mapping. This is intended to support
some future case where multiple IB drivers (ie iWarp and RoCE) connect to
the same netdevs. driver_ids will need to be different to support this.
In the process this makes the struct ib_device and ib_port_data RCU safe
by deferring their kfrees.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The associated netdev should not actually be very dynamic, so for most
drivers there is no reason for a callback like this. Provide an API to
inform the core code about the net dev affiliation and use a core
maintained data structure instead.
This allows the core code to be more aware of the ndev relationship which
will allow some new APIs based around this.
This also uses locking that makes some kind of sense, many drivers had a
confusing RCU lock, or missing locking which isn't right.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Like the other cases there no real reason to have another array just for
the cache. This larger conversion gets its own patch.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is no reason to have three allocations of per-port data. Combine
them together and make the lifetime for all the per-port data match the
struct ib_device.
Following patches will require more port-specific data, now there is a
good place to put it.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
We have many loops iterating over all of the end port numbers on a struct
ib_device, simplify them with a for_each helper.
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is no need to expose internals of restrack DB to IB/core.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
XArray uses internal lock for updates to XArray. This means that our
external RW lock is needed to ensure that entry is not deleted while we
are performing iteration over list.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add new general helper to get restrack entry given by ID and their
respective type.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The additions of .doit callbacks posses new access pattern to the resource
entries by some user visible index. Back then, the legacy DB was
implemented as hash because per-index access wasn't needed and XArray
wasn't accepted yet.
Acceptance of XArray together with per-index access requires the refresh
of DB implementation.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Now when we have the udata passed to all the ib_xxx object creation APIs
and the additional macro 'rdma_udata_to_drv_context' to get the
ib_ucontext from ib_udata stored in uverbs_attr_bundle, we can finally
start to remove the dependency of the drivers in the
ib_xxx->uobject->context.
Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Helper function to get driver's context out of ib_udata wrapped in
uverbs_attr_bundle for user objects or NULL for kernel objects.
Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add ib_ucontext to the uverbs_attr_bundle sent down the iocl and cmd flows
as soon as the flow has ib_uobject.
In addition, remove rdma_get_ucontext helper function that is only used by
ib_umem_get.
Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
I had merged the hfi1-tid code into my local copy of for-next, but was
waiting on 0day testing before pushing it (I pushed it to my wip
branch). Having waited several days for 0day testing to show up, I'm
finally just going to push it out. In the meantime, though, Jason
pushed other stuff to for-next, so I needed to merge up the branches
before pushing.
Signed-off-by: Doug Ledford <dledford@redhat.com>
Due to concurrent work by myself and Jason, a normal fast forward merge
was not possible. This brings in a number of hfi1 changes, mainly the
hfi1 TID RDMA support (roughly 10,000 LOC change), which was reviewed
and integrated over a period of days.
Signed-off-by: Doug Ledford <dledford@redhat.com>
The locking here started out with a single lock that covered everything
and then has lately veered into crazy town.
The fundamental problem is that several places need to iterate over a
linked list, but also need to drop their locks to avoid deadlock during
client callbacks.
xarray's restartable iteration offers a simple solution to the
problem. Once all the lists are xarrays we can drop locks in the places
that need that and rely on xarray to provide consistency and locking for
the data structure.
The resulting simplification is that each of the three lists has a
dedicated rwsem that must be held when working with the list it
covers. One data structure is no longer covered by multiple locks.
The sleeping semaphore is selected because the read side generally needs
to be held over something sleeping, and using RCU reader locking in those
cases is overkill.
In the process this simplifies the entire registration/unregistration flow
to be the expected list of setups and the reversed list of matching
teardowns, and the registration lock 'refcount' can now be revised to be
released after the ULPs are removed, providing a very sane semantic for
this feature.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Now that we have a small ID for each client we can use xarray instead of
linearly searching linked lists for client data. This will give much
faster and scalable client data lookup, and will lets us revise the
locking scheme.
Since xarray can store 'going_down' using a mark just entirely eliminate
the struct ib_client_data and directly store the client_data value in the
xarray. However this does require a special iterator as we must still
iterate over any NULL client_data values.
Also eliminate the client_data_lock in favour of internal xarray locking.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This gives each client a unique ID and will let us move client_data to use
xarray, and revise the locking scheme.
clients have to be add/removed in strict FIFO/LIFO order as they
interdepend. To support this the client_ids are assigned to increase in
FIFO order. The existing linked list is kept to support reverse iteration
until xarray can get a reverse iteration API.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
This really has no purpose anymore, refcount can be used to tell if the
device is still registered. Keeping it around just invites mis-use.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Gal Pressman