Accessing the THIS_MODULE directly is only possible when modules
are enabled, otherwise we get a build failure:
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c: In function 'amdgpu_virt_init_data_exchange':
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:331:20: error: dereferencing pointer to incomplete type 'struct module'
Further, THIS_MODULE is NULL when the driver is built-in, so the
code would likely cause a NULL pointer dereference.
This adds an #ifdef check to avoid the compile-time error, plus
a NULL pointer check before dereferencing THIS_MODULE. It might
be better to find a way to avoid using the module version
altogether.
Fixes: 2dc8f81e4f ("drm/amdgpu: SR-IOV data exchange between PF&VF")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-By: Xiangliang Yu <Xiangliang.Yu@amd.com>
After a reset, we may immediately begin executing requests on restarting
the engines. Ergo this has to be last step with all re-initialisation
completed beforehand. The mocs setup was after we started executing the
requests; do it earlier!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171102131430.22328-1-chris@chris-wilson.co.uk
GEM_BUG_ON if the packed bits do not fit into the specified width.
v2: Avoid using the macro argument twice.
v3: Drop unnecessary braces. (Joonas)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171103090538.14474-1-tvrtko.ursulin@linux.intel.com
We have to reject unknown flags for uAPI considerations, and also
because the curent implementation limits their i915 storage space
to two bits.
v2: (Chris Wilson)
* Fix fail in ABI check.
* Added unknown flags and BUILD_BUG_ON.
v3:
* Use ARCH_KMALLOC_MINALIGN instead of alignof. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: cf6e7bac63 ("drm/i915: Add support for drm syncobjs")
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171031102326.9738-1-tvrtko.ursulin@linux.intel.com
nouveau next fixes.
Fixes arm32 build.
* 'linux-4.15' of git://github.com/skeggsb/linux:
drm/nouveau/bios/timing: mark expected switch fall-throughs
drm/nouveau/devinit/nv04: mark expected switch fall-throughs
drm/nouveau/bios: make const arrays hwsq_signature and edid_sig static
drm/nouveau/core/memory: fix missing mutex unlock
drm/nouveau/mmu: swap out round for ALIGN
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 1260018
Addresses-Coverity-ID: 1260019
Addresses-Coverity-ID: 1260022
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 143119
Addresses-Coverity-ID: 143120
Addresses-Coverity-ID: 143121
Addresses-Coverity-ID: 143122
Addresses-Coverity-ID: 143123
Addresses-Coverity-ID: 143124
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Don't populate arrays hwsq_signature and edid_sig on the stack but
instead make them static. Makes the object code smaller by over 190
bytes:
Before:
text data bss dec hex filename
35676 3312 64 39052 988c nouveau_bios.o
After:
text data bss dec hex filename
35319 3472 64 38855 97c7 nouveau_bios.o
(gcc version 7.2.0 x86_64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
- Usermode Events
The current events code implemented some data structures (waitqueue, fifo)
that were already implemented in the kernel. The patches below addresses
this issue by replacing them with the standard kernel implementation.
In addition, they simplify allocation of events IDs and memory for the events.
The patches also increase the maximum number of events while maintaining
compatibility with the older userspace library.
- Remove radeon support
Because Kaveri is fully supported in amdgpu and because current and future
versions of userspace libraries will only support amdgpu, we removed radeon
support from kfd. Current users can move to amdgpu while using the same
userspace libraries.
- Various bug fixes and cleanups
* tag 'drm-amdkfd-next-2017-11-02' of git://people.freedesktop.org/~gabbayo/linux: (26 commits)
drm/amdkfd: Minor cleanups
drm/amdkfd: Update queue_count before mapping queues
drm/amdkfd: Cleanup DQM ASIC-specific ops
drm/amdkfd: Register/Deregister process on qpd resolution
drm/amdkfd: Fix debug unregister procedure on process termination
drm/amdkfd: Avoid calling amd_iommu_unbind_pasid() when suspending
drm/amdkfd: Disable CP/SDMA ring/doorbell in MQD
drm/amdkfd: Clean up the data structure in kfd_process
drm/radeon: deprecate and remove KFD interface
drm/amdkfd: use a high priority workqueue for IH work
drm/amdkfd: wait only for IH work on IH exit
drm/amdkfd: increase IH num entries to 8192
drm/amdkfd: use standard kernel kfifo for IH
drm/amdkfd: increase limit of signal events to 4096 per process
drm/amdkfd: Make event limit dependent on user mode mapping size
drm/amdkfd: Use IH context ID for signal lookup
drm/amdkfd: Simplify event ID and signal slot management
drm/amdkfd: Simplify events page allocator
drm/amdkfd: Use wait_queue_t to implement event waiting
drm/amdkfd: remove redundant kfd_event_waiter.input_index
...
Some amdgpu/ttm fixes.
* 'drm-next-4.15' of git://people.freedesktop.org/~agd5f/linux:
drm/amd/powerplay: wrong control mode cause the fan spins faster unnecessarily
drm/amd/powerplay: fix memory leak of hardcoded pptable
drm/amdgpu:add fw-vram-usage for atomfirmware
drm/radeon: fix atombios on big endian
drm/ttm:fix memory leak due to individualize
drm/amdgpu: fix error handling in amdgpu_bo_do_create
drm/ttm: once more fix ttm_buffer_object_transfer
drm/amd/powerplay: change ASIC temperature reading on Vega10
Because dev_priv is 0-ed it's not currently an issue, but since we
have dev_priv->perf.oa.test_config.uuid size at uuid + 1, we could
just copy the null character.
v2: Use strlcpy instead of strncpy (Chris)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171102121827.436-1-lionel.g.landwerlin@intel.com
There is a possibility on gen9 hardware to miss the forcewake ack
message. The recommended workaround is to use another free
bit and toggle it until original bit is successfully acknowledged.
Some future gen9 revs might or might not fix the underlying issue but
using fallback forcewake bit dance can be considered as harmless:
without the ack timeout we never reach the fallback bit forcewake.
Thus as of now we adopt a blanket approach for all gen9 and leave
the bypassing the fallback bit approach for future patches if
corresponding hw revisions do appear.
Commit 83e3337204 ("drm/i915: Increase maximum polling time to 50ms
for forcewake request/clear ack") did increase the forcewake timeout.
If the issue was a delayed ack, future work could include finding
a suitable timeout value both for primary ack and reserve toggle
to reduce the worst case latency.
v2: use bit 15, naming, comment (Chris), only wait fallback ack
v3: fix return on fallback, backoff after fallback write (Chris)
v4: udelay on first pass, grammar (Chris)
v4: s/reserve/fallback
References: HSDES #1604254524
References: https://bugs.freedesktop.org/show_bug.cgi?id=102051
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171102094836.2506-1-mika.kuoppala@linux.intel.com
This patch adds per engine reset and recovery (TDR) support when GuC is
used to submit workloads to GPU.
In the case of i915 directly submission to ELSP, driver manages hang
detection, recovery and resubmission. With GuC submission these tasks
are shared between driver and GuC. i915 is still responsible for detecting
a hang, and when it does it only requests GuC to reset that Engine. GuC
internally manages acquiring forcewake and idling the engine before
resetting it.
Once the reset is successful, i915 takes over again and handles the
resubmission. The scheduler in i915 knows which requests are pending so
after resetting a engine, pending workloads/requests are resubmitted
again.
v2: s/i915_guc_request_engine_reset/i915_guc_reset_engine/ to match the
non-guc function names.
v3: Removed debug message about engine restarting from which request,
since the new baseline do it regardless of submission mode. (Chris)
v4: Rebase.
v5: Do not pass unnecessary reporting flags to the fw (Jeff);
tasklet_schedule(&execlists->irq_tasklet) handles the resubmit; rebase.
v6: Rename the existing reset engine function and share a similar
interface between guc and non-guc paths (Chris).
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171031225309.10888-1-michel.thierry@intel.com
Reviewed-by: Jeff McGee <jeff.mcgee@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
intel_guc_reset sounds more like the microcontroller is the one performing
a reset, while in this case is the opposite. intel_reset_guc not only
makes it clearer, it follows the other intel_reset functions available.
v2: Print error message in English (Tvrtko).
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171030185616.32836-2-michel.thierry@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
If GuC firmware performs an engine reset while that engine had a
preemption pending, it will set the terminated attribute bit on our
preemption stage descriptor. GuC firmware retains all pending work
items for a high-priority GuC client, unlike the normal-priority GuC
client where work items are dropped. It wants to make sure the preempt-
to-idle work doesn't run when scheduling resumes, and uses this bit to
inform its scheduler and presumably us as well. Our job is to clear it
for the next preemption after reset, otherwise that and future
preemptions will never complete. We'll just clear it every time.
Signed-off-by: Jeff McGee <jeff.mcgee@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171101221630.25086-1-jeff.mcgee@intel.com
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
- Pascal temperature sensor support
- Improved BAR2 handling, greatly reduces time required to suspend
- Rework of the MMU code
- Allows us to properly support Pascal's new MMU layout (implemented)
- Lays the groundwork for improved userspace APIs later
- Misc other fixes
* 'linux-4.15' of git://github.com/skeggsb/linux: (151 commits)
drm/nouveau/gr/gf100-: don't prevent module load if firmware missing
drm/nouveau/mmu: remove old vmm frontend
drm/nouveau: improve selection of GPU page size
drm/nouveau: switch over to new memory and vmm interfaces
drm/nouveau: remove unused nouveau_fence_work()
drm/nouveau: queue delayed unmapping of VMAs on client workqueue
drm/nouveau: implement per-client delayed workqueue with fence support
drm/nouveau: determine memory class for each client
drm/nouveau: pass handle of vmm object to channel allocation ioctls
drm/nouveau: switch to vmm limit
drm/nouveau: allocate vmm object for every client
drm/nouveau: replace use of cpu_coherent with memory types
drm/nouveau: use nvif_mmu_type to determine BAR1 caching
drm/nouveau: fetch memory type indices that we care about for ttm
drm/nouveau: consolidate handling of dma mask
drm/nouveau: check kind validity against mmu object
drm/nouveau: allocate mmu object for every client
drm/nouveau: remove trivial cases of nvxx_device() usage
drm/nouveau/mmu: define user interfaces to mmu vmm opertaions
drm/nouveau/mmu: define user interfaces to mmu memory allocation
...
VMAs are about to not take references on the VMM they belong to, which
means more care is required when handling delayed unmapping.
Queuing it on the client workqueue ensures all pending VMA unmaps will
have completed before the VMM is destroyed.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This is already handled in the top-level gem_new() ioctl in another manner,
but this will be removed in a future commit.
Ideally we'd not need to check up-front at all, and let the VMM code handle
error checking, but there are paths in the current BO management code where
this isn't possible due to map() not always being called during BO creation,
and map() calls not being allowed to fail during buffer migration.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
If the VMA is being deleted, we don't need to explicity unmap first
anymore. The MMU code will automatically merge the operations into
a single page tree walk.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Arnd Bergmann