Current dapm widget has a single variable to describe its kcontrol's
type. As there can be many kcontrols in one widget it is inherently
presumed that the types are the same.
Lately there has been use cases where different types of kcontrols would
be needed for a single widget. Thus add pointer to dapm widget to hold
an array for different kcontrol types and modify the kcontrol creation
to operate in a loop based on individual kcontrol type.
Change control creation and deletion to use individual kcontrol types in
SOF driver. This is done in the same patch for not breaking bisect. SOF
driver is also currently the only one using the dapm widget
kcontrol_type.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20210507070246.404446-1-jaska.uimonen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The patch "ASoC: SOF: Intel: hda: assign link DMA channel at run-time"
fixed the sof_link_hda_unload() to remove the call to the BE
hw_free op but left the rest of code that become redundant.
So, remove sof_link_hda_unload() along with the link_unload() op
entirely as it is not longer needed.
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20210409220522.1542865-1-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC parses multiple hw_configs defined in topology. However currently
in SOF only the first config is used and others are discarded. First
change SOF driver to parse and save possible multiple configs in ssp
case. Also save the default config value provided by ASoC. Functionality
with only one defined config stays the same.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210326165150.255533-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With recent SOF 1.7 pre-releases, kernel has been emitting following
warnings at probe:
[10006.645216] sof-audio-pci 0000:00:1f.3: warn: FW ABI is more recent than kernel
[10006.652137] sof-audio-pci 0000:00:1f.3: warn: topology ABI is more recent than kernel
The warnings are emitted due to increase of the patch-level in firmware
mainline (to 3.17.1). But the patch level should not be considered even
in the strict ABI check, so modify the kernel side logic that makes the
check and only consider the major.minor components.
BugLink: https://github.com/thesofproject/linux/issues/2647
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20210211172440.2371447-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When there is no TLV data in topology, extracting the TLV data
could result in a NULL pointer exception. Prevent this by making
sure that the TLV data exists before extracting it.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210201093128.1226603-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Only manage enabled_cores_mask in common snd_sof_dsp_core_power_up/down
APIs to ensure it stays in sync with actual DSP core state.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210128093850.1041387-4-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SOF firmware and topology files are not distributed via
linux-firmware. To help debugging cases where correct firmware is
not installed, print a pointer to the official upstream repository
for Sound Open Firmware releases.
BugLink: https://github.com/thesofproject/sof/issues/3665
Reported-by: Bruce Perens <bruce@perens.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Marc Herbert <marc.herbert@intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://lore.kernel.org/r/20210127122358.1014458-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC dapm controls currently don't support more than 2 channels. This is
a problem for SOF-based devices where individual volume control cannot
be provided on the 4 DMIC input path.
If we want to provide controls for more than 2 channels, this patch
suggests a simple solution based on an override of the info callback.
For example, in the case with 4 channel DMIC PGAs, a sof_info callback
would be used. Mono and stereo cases will keep using the existing dapm
info callback.
A longer-term solution would be to remove the limits to 2 channels in
ASoC/DAPM/topology. This is a topic Intel is currently looking into,
e.g. by removing the use of 'reg' and 'rreg' fields and use arrays
instead. Such changes will be rather intrusive and touch multiple codec
and platform drivers. Removing restrictions is the right thing to do,
but this will need to be done in steps with lots of validation.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201111173105.1927466-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In theory topology can be loaded in multiple steps by providing index to
snd_soc_tplg_component_load, however, from usability point of view it
doesn't make sense, as can be seen from all current users loading
topology in one go. Remove the unnecessary parameter.
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20201030145427.3497990-3-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We should only use the type, the const attribute makes no sense in
sizeof().
Reported-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Tested-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20200930152026.3902186-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In commit 783898ce68 ("ASoC: SOF: append extended data to
sof_ipc_comp_process") the process components are set to run on the
fixed core 0, this break us from scheduling components on any other DSP
core.
Since we can get the DSP core index from swidget->core, it is duplicated
to pass the extra 'core' argument for those sof_widget_load_xx()
functions.
Here removes the duplicate 'core' argument and get component core from
swidget->core directly to fix the issue mentioned above.
Fixes: 783898ce68 ("ASoC: SOF: append extended data to sof_ipc_comp_process")
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Jaska Uimonen <jaska.uimonen@intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200921104544.2897112-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On multiple locations checks are performed of untrusted values after adding
a constant to them. This is wrong, because the addition might overflow and
the result can then pass the check, although the original value is invalid.
Fix multiple such issues by checking the actual value and not a sum of it
and a constant.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200917105633.2579047-8-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In some cases no "ret" variable is even needed, those functions always
return 0 anyway, in other cases "ret" initialisation is redundant.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200917105633.2579047-6-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch implements the snd_sof_bytes_ext_volatile_get() to read the
actual parameters from DSP by sending the SOF_IPC_COMP_GET_DATA IPC
for the kcontrol of type SOF_TPLG_KCTL_BYTES_VOLATILE_RO.
Signed-off-by: Dharageswari R <dharageswari.r@intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200908092825.1813847-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As components can be now identified with a UUID based mechanism, the
process type is no longer required. For new DSP components, process and
its component type can be set to SOF_PROCESS_NONE and SOF_COMP_NONE.
Allow this combination in topology load, modify the load time check for
process type to reflect this.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Curtis Malainey <curtis@malainey.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-17-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Append the extended data to the end of the struct sof_ipc_comp_mux,
construct the ipc for COMP_NEW during the topology load stage.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-16-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Append the extended data to the end of the struct sof_ipc_comp_process,
construct the ipc for COMP_NEW during the topology load stage.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-15-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Append the extended data to the end of the struct sof_ipc_comp_tone,
construct the ipc for COMP_NEW during the topology load stage.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-14-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Append the extended data to the end of the struct sof_ipc_comp_asrc,
construct the ipc for COMP_NEW during the topology load stage.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-13-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Append the extended data to the end of the struct sof_ipc_comp_src,
construct the ipc for COMP_NEW during the topology load stage.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-12-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Append the extended data to the end of the struct sof_ipc_comp_host,
construct the ipc for COMP_NEW during the topology load stage.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-11-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Append the extended data to the end of the struct sof_ipc_comp_volume,
construct the ipc for COMP_NEW during the topology load stage.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-10-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Append the extended data to the end of the struct sof_ipc_comp_mixer,
construct the ipc for COMP_NEW during the topology load stage.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-9-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Append the extended data to the end of the struct sof_ipc_comp_dai, and
update the ext_data_offset, to construct the IPC for the topology load
and runtime restore.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-8-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add helper to allocate buffer for IPC component, configure the basic
settings, and set up the extended data for the subsequent IPC sending.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-7-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Parse comp_ext_tokens in the common sof_widget_ready(), and the
swidget->comp_ext will be used to construct the COMP_NEW ipc in the
subsequent commits.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-5-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add comp_ext_tokens which will be used to parse all extended tokens,
these tokens will be stored it to struct snd_sof_widget.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-4-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Core power up involves 2 steps: The first step tries to
power up the core by setting the ADSPCS.SPA bit for the host-managed
cores. The second step involves sending the IPC to power up other
cores that are not host managed. The enabled_cores_mask should
be updated only when both these steps are successful. If the
IPC to the DSP fails, the host-managed core that was powered in
step 1 should be powered off before returning the error.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200902140756.1427005-4-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently SOF supports running pipelines on secondary DSP cores in a
limited way. This patch represents the next step in SOF multi-core DSP
support, it adds checks for core ID to individual topology components.
It takes care to power up all the requested cores. More advanced DSP
core power management should be added in the future.
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200902140756.1427005-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We want to be able to explicitly assign cores to individual pipeline
components. This patch adds a "core" parameter to widget loading
functions to be sent to the DSP for appropriate component scheduling.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200902140756.1427005-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The topology private struct is used for token parsing and its size
should not be included to the ipc_size, fix it here though it didn't
cause any real issue as the Firmware won't use this wrong-added data.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Jaska Uimonen <jaska.uimonen@intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200825235040.1586478-5-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Virtual widgets are added to topology to be compatible with legacy
machine drivers. Reduce the log level for messages printed when
such widgets are ignored by the SOF driver.
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200824200912.46852-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Looks like it was left over from the previous implementation of
DMIC PDM token parsing. It is not used anymore.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200824200912.46852-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove two cases of redundant variable initialisation.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200824200912.46852-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
These parameters are read from topology file and sent to DSP.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200720072046.8152-7-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add smart amplifier component support, which is designed as another new
type of process component and used for speaker protection algorithm
integration.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200515135958.17511-5-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove the ambiguity with GPL-2.0 and use an explicit GPL-2.0-only
tag.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200501145850.15178-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
At the first time update_mute_led() gets called, if channels are already
muted, the temp value equals to led_value as 0, skipping the following
LED setting.
So set led_value to -1 as an uninitialized state, to update the correct
LED status at first time usage.
Fixes: 5d43001ae4 ("ASoC: SOF: acpi led support for switch controls")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Acked-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200430091139.7003-1-kai.heng.feng@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now the trigger sequence is set to SND_SOC_DPCM_TRIGGER_POST for
SOF. This means FE will be stopped before BE, so BE will consume
invalid data and this generates huge pop noise. This sequence is
introduced for HDA DAI which requires SND_SOC_DPCM_TRIGGER_POST for
some reasons. Now set default trigger sequence to SND_SOC_DPCM_TRIGGER_PRE
for playback with all DAI and fix sequence only for HDA DAI.
Fully tested on Comet Lake for a few cycles.
Signed-off-by: randerwang <rander.wang@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Clarex Zhou <clarex.zhou@intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200427172939.25848-5-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now we send ipc in sof_set_dai_config(), too. Therefore, we can use
sof_set_dai_config() in sof_link_hda_load() just like other link load
functions do.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200427172939.25848-4-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ipc dai config dai_index is from topology. However, the same dai
config will be applied to all DAIs in the same dai link. We have to
ensure that the ipc dai config's dai_index match to the component's
dai_index.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200427172939.25848-3-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We may find more than one DAIs in sof_set_dai_config() and we should
send message to DSP for each DAI we found.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200427172939.25848-2-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Widget's parameters are set in topology and they usually consist of
several different types of tuple arrays like strings, words and bytes.
Here this kind of combination is called a "set".
Lately we've seen more complex widget definitions with multiple
identical sets of tuple arrays. One example is the dmic pdm
configuration, which is currently handled as a special case in token
parsing. This is not scalable for other components with multiple sets.
So add a new function sof_parse_token_sets, which can be used to parse
multiple sets. This function defines the number of sets and an offset to
copy the tokens to correct positions in the destination ipc struct. Old
sof_parse_token function will be a special case of calling
sof_parse_token_sets to parse 1 set with offset 0.
Finally modify the dmic dai link loading to use the new
sof_parse_array_sets to load multiple pdm configs.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-25-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Optimize the parsing so that it will stop after all required tokens
have been found as there is no reason to continue after that.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-24-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
FW interface for HDA DAI parameters was extended with information on
sampling rate and channel count in version 3.16. Align kernel header
with the FW change. This change is backwards compatible. Old firmware
will ignore the values.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-23-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Jaska Uimonen