of_property_read_u32 returns 0 on success, not true, so we need to
invert the check to actually take over the provided ngpio value.
Fixes: 6a41b6c5fc ("gpio: Add xgs-iproc driver")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The gpio-mockup driver creates the properties that are shared between
platform and GPIO devices. Because of that, the properties may not
be removed at the proper point of time without provoking a use-after-free
as shown in the following backtrace:
refcount_t: underflow; use-after-free.
WARNING: CPU: 0 PID: 103 at lib/refcount.c:28 refcount_warn_saturate+0xd1/0x120
...
Call Trace:
kobject_put+0xdc/0xf0
software_node_notify_remove+0xa8/0xc0
device_del+0x15a/0x3e0
That's why the driver has to manage the lifetime of the software nodes
by itself.
The problem originates from the old device_add_properties() API, but
has been only revealed after the commit bd1e336aa8 ("driver core: platform:
Remove platform_device_add_properties()"). Hence, it's used as a landmark
for backporting.
Fixes: bd1e336aa8 ("driver core: platform: Remove platform_device_add_properties()")
Reported-by: Kent Gibson <warthog618@gmail.com>
Tested-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[Bartosz: tweaked local variable placement]
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The commit 15add06841 ("gpio: pca953x: add ->set_config implementation")
introduced support for bias setting. However this, due to being half-baked,
brought potential issues:
- the turning bias via disabling makes the pin floating for a while;
- once enabled, bias can't be disabled.
Fix all these by adding support for bias disabling and move the disabling
part under the corresponding conditional.
While at it, add support for default setting, since it's cheap to add.
Fixes: 15add06841 ("gpio: pca953x: add ->set_config implementation")
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding a SPI device ID table.
Fixes: 96c8395e21 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
- don't ignore I2C errors in gpio-pca953x
- update MAINTAINERS entries for Mun Yew Tham and myself
-----BEGIN PGP SIGNATURE-----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=j1i5
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"A single fix for the gpio-pca953x driver and two commits updating the
MAINTAINERS entries for Mun Yew Tham (GPIO specific) and myself
(treewide after a change in professional situation).
Summary:
- don't ignore I2C errors in gpio-pca953x
- update MAINTAINERS entries for Mun Yew Tham and myself"
* tag 'gpio-fixes-for-v5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
MAINTAINERS: Update Mun Yew Tham as Altera Pio Driver maintainer
MAINTAINERS: update my email address
gpio: pca953x: do not ignore i2c errors
Per gpio_chip interface, error shall be proparated to the caller.
Attempt to silent diagnostics by returning zero (as written in the
comment) is plain wrong, because the zero return can be interpreted by
the caller as the gpio value.
Cc: stable@vger.kernel.org
Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
- Fix wakeup interrupts in the AMD driver affecting AMD laptops.
- Fix parent irqspec translation in the Qualcomm SPMI GPIO driver.
- Fix deferred probe handling in the Rockchip driver, this is a
stopgap solution while we look for something more elegant.
- Add PM suspend callbacks to the Qualcomm SC7280 driver.
- Some minor doc fix (should have come in earlier, sorry)
-----BEGIN PGP SIGNATURE-----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=Gel/
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Some few pin control fixes for the v5.15 kernel cycle. The most
critical is the AMD fixes.
- Fix wakeup interrupts in the AMD driver affecting AMD laptops.
- Fix parent irqspec translation in the Qualcomm SPMI GPIO driver.
- Fix deferred probe handling in the Rockchip driver, this is a
stopgap solution while we look for something more elegant.
- Add PM suspend callbacks to the Qualcomm SC7280 driver.
- Some minor doc fix (should have come in earlier, sorry)"
* tag 'pinctrl-v5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: qcom: sc7280: Add PM suspend callbacks
gpio/rockchip: fetch deferred output settings on probe
pinctrl/rockchip: add a queue for deferred pin output settings on probe
pinctrl: qcom: spmi-gpio: correct parent irqspec translation
pinctrl: amd: Handle wake-up interrupt
pinctrl: amd: Add irq field data
pinctrl: core: Remove duplicated word from devm_pinctrl_unregister()
The function uses the newly introduced rockchip_gpio_readl_bit()
which directly returns the actual value of the requeste bit.
So using the existing bit-wise check for the bit inside the value
will always return 0.
Fix this by dropping the bit manipulation on the result.
Fixes: 3bcbd1a85b ("gpio/rockchip: support next version gpio controller")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The gpio driver runs into issues on v1 gpio blocks, as the db_clk
and the whole extended debounce support is only ever defined on v2.
So checking for the IS_ERR on the db_clk is not enough, as it will
be NULL on v1.
Fix this by adding the needed condition for v2 first before checking
the existence of the db_clk.
This caused my rk3288-veyron-pinky to enter a reboot loop when it
tried to enable the power-key as adc-key device.
Fixes: 3bcbd1a85b ("gpio/rockchip: support next version gpio controller")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The current hwirq is calculated based on the old GPIO pin order(input
GPIO range is from 0 to ngpios - 1).
It should be calculated based on the current GPIO input pin order(input
GPIOs are 0, 2, 4, ..., (ngpios - 1) * 2).
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The return type of irq_chip.irq_mask() and irq_chip.irq_unmask() should
be void.
Fixes: dbe776c2ca ("gpio: uniphier: add UniPhier GPIO controller driver")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Commit 8dcb7a15a5 ("gpiolib: acpi: Take into account debounce settings")
made the gpiolib-acpi code call gpio_set_debounce_timeout() when requesting
GPIOs.
This in itself is fine, but it also made gpio_set_debounce_timeout()
errors fatal, causing the requesting of the GPIO to fail. This is causing
regressions. E.g. on a HP ElitePad 1000 G2 various _AEI specified GPIO
ACPI event sources specify a debouncy timeout of 20 ms, but the
pinctrl-baytrail.c only supports certain fixed values, the closest
ones being 12 or 24 ms and pinctrl-baytrail.c responds with -EINVAL
when specified a value which is not one of the fixed values.
This is causing the acpi_request_own_gpiod() call to fail for 3
ACPI event sources on the HP ElitePad 1000 G2, which in turn is causing
e.g. the battery charging vs discharging status to never get updated,
even though a charger has been plugged-in or unplugged.
Make gpio_set_debounce_timeout() errors non fatal, warning about the
failure instead, to fix this regression.
Note we should probably also fix various pinctrl drivers to just
pick the first bigger discrete value rather then returning -EINVAL but
this will need to be done on a per driver basis, where as this fix
at least gets us back to where things were before and thus restores
functionality on devices where this was lost due to
gpio_set_debounce_timeout() errors.
Fixes: 8dcb7a15a5 ("gpiolib: acpi: Take into account debounce settings")
Depends-on: 2e2b496ceb ("gpiolib: acpi: Extract acpi_request_own_gpiod() helper")
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Fetch the output settings the pinctrl driver may have created
for pinctrl hogs and set the relevant pins as requested.
Fixes: 9ce9a02039 ("pinctrl/rockchip: drop the gpio related codes")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20210913224926.1260726-5-heiko@sntech.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- new driver: gpio-virtio allowing a guest VM running linux to access
GPIO lines provided by the host
- split the GPIO driver out of the rockchip pin control driver
- add support for a new model to gpio-aspeed-sgpio, refactor the driver
and use generic device property interfaces, improve property sanitization
- add ACPI support to gpio-tegra186
- improve the code setting the line names to support multiple GPIO banks
per device
- constify a bunch of OF functions in the core GPIO code and make the
declaration for one of the core OF functions we use consistent within its
header
- use software nodes in intel_quark_i2c_gpio
- add support for the gpio-line-names property in gpio-mt7621
- use the standard GPIO function for setting the GPIO names in gpio-brcmstb
- fix a bunch of leaks and other bugs in gpio-mpc8xxx
- use generic pm callbacks in gpio-ml-ioh
- improve resource management and PM handling in gpio-mlxbf2
- modernize and improve the gpio-dwapb driver
- coding style improvements in gpio-rcar
- documentation fixes and improvements
- update the MAINTAINERS entry for gpio-zynq
- minor tweaks in several drivers
-----BEGIN PGP SIGNATURE-----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=y/RY
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We mostly have various improvements and refactoring all over the place
but also some interesting new features - like the virtio GPIO driver
that allows guest VMs to use host's GPIOs. We also have a new/old GPIO
driver for rockchip - this one has been split out of the pinctrl
driver.
Summary:
- new driver: gpio-virtio allowing a guest VM running linux to access
GPIO lines provided by the host
- split the GPIO driver out of the rockchip pin control driver
- add support for a new model to gpio-aspeed-sgpio, refactor the
driver and use generic device property interfaces, improve property
sanitization
- add ACPI support to gpio-tegra186
- improve the code setting the line names to support multiple GPIO
banks per device
- constify a bunch of OF functions in the core GPIO code and make the
declaration for one of the core OF functions we use consistent
within its header
- use software nodes in intel_quark_i2c_gpio
- add support for the gpio-line-names property in gpio-mt7621
- use the standard GPIO function for setting the GPIO names in
gpio-brcmstb
- fix a bunch of leaks and other bugs in gpio-mpc8xxx
- use generic pm callbacks in gpio-ml-ioh
- improve resource management and PM handling in gpio-mlxbf2
- modernize and improve the gpio-dwapb driver
- coding style improvements in gpio-rcar
- documentation fixes and improvements
- update the MAINTAINERS entry for gpio-zynq
- minor tweaks in several drivers"
* tag 'gpio-updates-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (35 commits)
gpio: mpc8xxx: Use 'devm_gpiochip_add_data()' to simplify the code and avoid a leak
gpio: mpc8xxx: Fix a potential double iounmap call in 'mpc8xxx_probe()'
gpio: mpc8xxx: Fix a resources leak in the error handling path of 'mpc8xxx_probe()'
gpio: viperboard: remove platform_set_drvdata() call in probe
gpio: virtio: Add missing mailings lists in MAINTAINERS entry
gpio: virtio: Fix sparse warnings
gpio: remove the obsolete MX35 3DS BOARD MC9S08DZ60 GPIO functions
gpio: max730x: Use the right include
gpio: Add virtio-gpio driver
gpio: mlxbf2: Use DEFINE_RES_MEM_NAMED() helper macro
gpio: mlxbf2: Use devm_platform_ioremap_resource()
gpio: mlxbf2: Drop wrong use of ACPI_PTR()
gpio: mlxbf2: Convert to device PM ops
gpio: dwapb: Get rid of legacy platform data
mfd: intel_quark_i2c_gpio: Convert GPIO to use software nodes
gpio: dwapb: Read GPIO base from gpio-base property
gpio: dwapb: Unify ACPI enumeration checks in get_irq() and configure_irqs()
gpiolib: Deduplicate forward declaration in the consumer.h header
MAINTAINERS: update gpio-zynq.yaml reference
gpio: tegra186: Add ACPI support
...
If an error occurs after a 'gpiochip_add_data()' call it must be undone by
a corresponding 'gpiochip_remove()' as already done in the remove function.
To simplify the code a fix a leak in the error handling path of the probe,
use the managed version instead (i.e. 'devm_gpiochip_add_data()')
Fixes: 698b8eeaed ("gpio/mpc8xxx: change irq handler from chained to normal")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Commit 76c47d1449 ("gpio: mpc8xxx: Add ACPI support") has switched to a
managed version when dealing with 'mpc8xxx_gc->regs'. So the corresponding
'iounmap()' call in the error handling path and in the remove should be
removed to avoid a double unmap.
This also allows some simplification in the probe. All the error handling
paths related to managed resources can be direct returns and a NULL check
in what remains in the error handling path can be removed.
Fixes: 76c47d1449 ("gpio: mpc8xxx: Add ACPI support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Commit 698b8eeaed ("gpio/mpc8xxx: change irq handler from chained to normal")
has introduced a new 'goto err;' at the very end of the function, but has
not updated the error handling path accordingly.
Add the now missing 'irq_domain_remove()' call which balances a previous
'irq_domain_create_linear() call.
Fixes: 698b8eeaed ("gpio/mpc8xxx: change irq handler from chained to normal")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The platform_set_drvdata() call is only useful if we need to retrieve back
the private information.
Since the driver doesn't do that, it's not useful to have it.
This change removes it.
Also removing with this change is some logging about the failure to init
the gpio chip data. There are other logging methods to view that this
failed.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Fix warnings reported by sparse, related to type mismatch between u16
and __le16.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 3a29355a22 ("gpio: Add virtio-gpio driver")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
API updates:
- Treewide conversion to generic_handle_domain_irq() for anything
that looks like a chained interrupt controller
- Update the irqdomain documentation
- Use of bitmap_zalloc() throughout the tree
New functionalities:
- Support for GICv3 EPPI partitions
Fixes:
- Qualcomm PDC hierarchy fixes
- Yet another priority decoding fix for the GICv3 pseudo-NMIs
- Fix the apple-aic driver irq_eoi() callback to always unmask
the interrupt
- Properly handle edge interrupts on loongson-pch-pic
- Let the mtk-sysirq driver advertise IRQCHIP_SKIP_SET_WAKE
-----BEGIN PGP SIGNATURE-----
iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAmEqIhgPHG1hekBrZXJu
ZWwub3JnAAoJECPQ0LrRPXpDjPkP/Rtp6WNZ1QUfJWmHovnh/Wc6ob1DXcBwi9nX
hy4miIJ1SWuez9G49RlQAiXZoB28B6KKCKKmouiqu7ke7WUhifS0K1ej188wjxRX
dqRG+m9yBAqKSr0lyWLB5VVCc8XBz4oZTc28n585gHiXfAPv7u0EzW+zNrnloLU5
NrAj6ppGFUzVT0VxRqcurbymE6OwRWjc3D+z/PhtHZ4SFOhft95CXgsdvMklqyLj
wwiuZ0Dhj5EruSP/Z7DzbbXnMNmte3HC2/cUNPYkho4/rk+2gVnYv5kVdfPHKQCY
Wjti/kvuPC3hdTvdw8g7VQfP63R3clZhcQ8s+myoeX5LWzyAHpoxAtdsbX7oVsgs
aKyrFhddEFVuiFizYyweS89pL0kCkTob8/zlGeuhRiVRTZ3+kG7Zf2UTTnN1ZdLw
2lMolghiGk4LYJfr83+CDZyYP/VGHDCthfrmd//l39P2wJhkuCDbbeKaElLGWvUt
abnPf0buCRqMAJe7vh0GHCx7290nEh2IqyHR4AYRVhRaN7bfAXdZH9Xp6ZGT25Fz
uORgUbGAyhd5Ics/7twE4qeOkfJ6fxwgXsOlx90EfgVYyDJ1sBHNx8Buo2z8Bl/2
rwCsW49kU7yX/wp11sJctR72RuLKC23dxS6z7aSWkRc6k3u+8xl2eeLIN59FNrKZ
ToTdbXEQ
=bdm2
-----END PGP SIGNATURE-----
Merge tag 'irqchip-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates from Marc Zyngier:
- API updates:
- Treewide conversion to generic_handle_domain_irq() for anything
that looks like a chained interrupt controller
- Update the irqdomain documentation
- Use of bitmap_zalloc() throughout the tree
- New functionalities:
- Support for GICv3 EPPI partitions
- Fixes:
- Qualcomm PDC hierarchy fixes
- Yet another priority decoding fix for the GICv3 pseudo-NMIs
- Fix the apple-aic driver irq_eoi() callback to always unmask
the interrupt
- Properly handle edge interrupts on loongson-pch-pic
- Let the mtk-sysirq driver advertise IRQCHIP_SKIP_SET_WAKE
Link: https://lore.kernel.org/r/20210828121013.2647964-1-maz@kernel.org
This patch adds a new driver for Virtio based GPIO devices.
This allows a guest VM running Linux to access GPIO lines provided by
the host. It supports all basic operations, except interrupts for the
GPIO lines.
Based on the initial work posted by:
"Enrico Weigelt, metux IT consult" <lkml@metux.net>.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
There has spin lock for irq set type already, so drop irq_gc_lock and
irq_gc_unlock.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Link: https://lore.kernel.org/r/20210816012135.1119234-1-jay.xu@rock-chips.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Store register offsets in the struct rockchip_gpio_regs, this patch
prepare for the driver update for new gpio controller.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Link: https://lore.kernel.org/r/20210816012111.1119125-1-jay.xu@rock-chips.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This patch add support for rockchip gpio controller, which is supported
in pinctrl driver in the past.
With this patch, the pinctrl-rockchip driver will drop gpio related
codes and populate platform driver to gpio-rockchip.
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Link: https://lore.kernel.org/r/20210816012053.1119069-1-jay.xu@rock-chips.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Use DEFINE_RES_MEM_NAMED() to save a couple of lines of code, which makes
the code a bit shorter and easier to read.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Simplify the platform_get_resource() and devm_ioremap_resource()
calls with devm_platform_ioremap_resource().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
ACPI_PTR() is more harmful than helpful. For example, in this case
if CONFIG_ACPI=n, the ID table left unused which is not what we want.
Instead of adding ifdeffery here and there, drop ACPI_PTR() and
replace acpi.h with mod_devicetable.h.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Asmaa Mnehi <asmaa@nvidia.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
* Rework DesignWare driver to use software nodes instead of platform data
* Drop duplication of forward declaration for ACPI in consumer.h
* Get rid of legacy PCI PM code in ML IOH driver
The following is an automated git shortlog grouped by driver:
dwapb:
- Get rid of legacy platform data
- Read GPIO base from gpio-base property
- Unify ACPI enumeration checks in get_irq() and configure_irqs()
gpiolib:
- Deduplicate forward declaration in the consumer.h header
mfd:
- intel_quark_i2c_gpio: Convert GPIO to use software nodes
ml-ioh:
- Convert to dev_pm_ops
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEqaflIX74DDDzMJJtb7wzTHR8rCgFAmEVJWkACgkQb7wzTHR8
rCg5ZRAAhLifQXJJBR9YCcqsccDA/DezLPUOJoM2VZNu7PdpeRKY8VPomGxbr0mD
DqjEC5OZyCyeToiXWOJmImtacYUrCw6WmOoHouzwOM/L9wEOWHMJnuGPt5207xOW
OVv5Onv2fpZUuhamsmB96CSs0jqgVmTh7SCtaWxMbroNlU2y2LZDz5FIft7+xQx/
vHi42BSBt4I6VzYC0AYJAEnqtM5LMy8GcTm3ZgzikHVyQfufhDxb+NIiWqCmji3w
+tVQpPIYdNAnDm9ApbabM3fYdDJB7JXvzHSk6Mby9HjXULfnfWPVKHoI188QjJ/F
DRyBnjK//a4tWGfJjlR6HgxQfSu99O7uYCGQHxG7emaXvSNnJ2pG094sqErhtP3A
G+bbygVAvgouzpzpb7yyxLqgagIm28o7Q7c2M291KhBFU3nQQ83cPGY7E/6ByAup
HmBSXVVVWHa6cgi0OHVKr9Vxdjo7iexG6z5JX6kZ3rUIcggbHGvmcelGfKAq5H2t
ynSWAL5+nV09bR69vJwQpQ4YMfBYCzbK+taxZ9CjIl/QgQUKFEqOHLp0F7JkLASf
abC+6DrwXHTpqAvQpzuj8DhUndG5pTCsNGRibwLqFcFt/LXfJr5MW+gn8Hu1+bAw
H5rOKMnDZ1yYsoXoLcsbcjVtW2sJo1F+kRATwUwedRn1lzL7l3k=
=L82Z
-----END PGP SIGNATURE-----
Merge tag 'intel-gpio-v5.15-1' of gitolite.kernel.org:pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-next
intel-gpio for v5.15-1
* Rework DesignWare driver to use software nodes instead of platform data
* Drop duplication of forward declaration for ACPI in consumer.h
* Get rid of legacy PCI PM code in ML IOH driver
The following is an automated git shortlog grouped by driver:
dwapb:
- Get rid of legacy platform data
- Read GPIO base from gpio-base property
- Unify ACPI enumeration checks in get_irq() and configure_irqs()
gpiolib:
- Deduplicate forward declaration in the consumer.h header
mfd:
- intel_quark_i2c_gpio: Convert GPIO to use software nodes
ml-ioh:
- Convert to dev_pm_ops
Wherever possible, replace constructs that match either
generic_handle_irq(irq_find_mapping()) or
generic_handle_irq(irq_linear_revmap()) to a single call to
generic_handle_domain_irq().
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Platform data is a legacy interface to supply device properties
to the driver. In this case we don't have anymore in-kernel users
for it. Just remove it for good.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
For backward compatibility with some legacy devices introduce
a new (*) property gpio-base to read GPIO base. This will allow
further cleaning up of the driver.
*) Note, it's not new for the GPIO library since the mockup driver
is using it already.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Shared IRQ is only enabled for ACPI enumeration, there is no need
to have a special flag for that, since we simple can test if device
has been enumerated by ACPI. This unifies the checks in dwapb_get_irq()
and dwapb_configure_irqs().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Add ACPI module ID to probe the driver from the ACPI based bootloader
firmware.
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
gpiolib does not modify struct device_node, so few local pointers can
point to a const data.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Several gpiolib functions receive pointer to struct device_node which is
later passed to OF functions. These OF functions accept already pointer
to const, so gpiolib can follow similar approach to indicate they are
not modifying the struct device_node.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Add an else-if condition in the probe function to check whether ngpios is
multiple of 8.
Per AST datasheet, numbers of available serial GPIO pins in Serial GPIO
Configuration Register must be n bytes. For instance, if n = 1, it means
AST SoC supports 8 GPIO pins.
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Replace all of_property_read_u32() with device_property_read_u32().
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The current design initializes irq->chip from a global irqchip struct,
which causes multiple sgpio devices use the same irq_chip.
The patch moves irq_chip to aspeed_sgpio struct for initializing
irq_chip from their private gpio struct.
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
AST SoC supports *retain pin state* function when wdt reset.
The patch adds set_config function for handling sgpio reset tolerance
register.
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The maximum number of gpio pins of SoC is hardcoded as 80 and the gpio pin
count mask for GPIO Configuration register is hardcode as GENMASK(9,6).
However, AST2600 has 2 sgpio master interfaces, one of them supports up
to 128 gpio pins and pin count mask of GPIO Configuration Register is 5
bits.
The patch adds ast2600 compatibles, removes MAX_NR_HW_SGPIO and
corresponding design to make the gpio input/output pin base are determined
by ngpios.
The patch also removed hardcoded pin mask and adds ast2400, ast2500,
ast2600 platform data that include gpio pin count mask for GPIO
Configuration Register.
The original pin order is as follows:
(suppose MAX_NR_HW_SGPIO is 80 and ngpios is 10 as well)
Input:
0 1 2 3 ... 9
Output:
80 81 82 ... 89
The new pin order is as follows:
Input:
0 2 4 6 ... 18
Output:
1 3 5 7 ... 19
SGPIO pin id and input/output pin mapping is as follows:
SGPIO0(0,1), SGPIO1(2,3), ..., SGPIO79(158,159)
For example:
Access SGPIO5(10,11)
Get SGPIO pin 5 (suppose sgpio chip id is 2)
gpioget 2 10
Set SGPIO pin 5 (suppose sgpio chip id is 2)
gpioset 2 11=1
gpioset 2 11=0
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The tqmx86 MFD driver was passing IRQ 0 for "no IRQ" in the past. This
causes warnings with newer kernels.
Prepare the gpio-tqmx86 driver for the fixed MFD driver by handling a
missing IRQ properly.
Fixes: b868db94a6 ("gpio: tqmx86: Add GPIO from for this IO controller")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Gpiolib core code has been updated to support setting friendly names
through properly 'gpio-line-names'. Instead of redefine behaviour here
to skip the core to be executed, just properly assign the desired offset
per bank to get in the core the expected behaviour.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Gregory Fong <gregory.0xf0@gmail.com>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
This driver uses multiple gpiochip banks per device. To support
'gpio-line-names' along the banks 'offset' for each bank must be
set explicitly.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The default gpiolib-of implementation does not work with the multiple
gpiochip banks per device structure used for example by the gpio-mt7621
and gpio-brcmstb drivers. To fix these kind of situations driver code
is forced to fill the names to avoid the gpiolib code to set names
repeated along the banks. Instead of continue with that antipattern
fix the gpiolib core function to get expected behaviour for every
single situation adding a field 'offset' in the gpiochip structure.
Doing in this way, we can assume this offset will be zero for normal
driver code where only one gpiochip bank per device is used but
can be set explicitly in those drivers that really need more than
one gpiochip.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Gregory Fong <gregory.0xf0@gmail.com>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Asmaa Mnebhi