The binner BO is not required until the V3D is in use, so avoid
allocating it at probe and do it on the first non-dumb BO allocation.
Keep track of which clients are using the V3D and liberate the buffer
when there is none left, using a kref. Protect the logic with a
mutex to avoid race conditions.
The binner BO is created at the time of the first render ioctl and is
destroyed when there is no client and no exec job using it left.
The Out-Of-Memory (OOM) interrupt also gets some tweaking, to avoid
enabling it before having allocated a binner bo.
We also want to keep the BO alive during runtime suspend/resume to avoid
failing to allocate it at resume. This happens when the CMA pool is
full at that point and results in a hard crash.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190516145544.29051-5-paul.kocialkowski@bootlin.com
One might want to use the VC4 display stack without using Mesa.
Similar to the debugfs fixes for not having all of the possible
display bits enabled, make sure you can't oops in vc4 if v3d isn't
enabled.
v2: Fix matching against other v3d variants (review by Paul), don't
forget to set irq_enabled so that the vblank uapi works
v3: Use -ENODEV instead of -EINVAL on Paul's suggestion.
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190401183559.3823-2-eric@anholt.net
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
The V3D engine has various hardware counters which might be interesting
to userspace performance analysis tools.
Expose new ioctls to create/destroy a performance monitor object and
query the counter values of this perfmance monitor.
Note that a perfomance monitor is given an ID that is only valid on the
file descriptor it has been allocated from. A performance monitor can be
attached to a CL submission and the driver will enable HW counters for
this request and update the performance monitor values at the end of the
job.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180112090926.12538-1-boris.brezillon@free-electrons.com
We were calling enable_irq on bind, where it was already enabled previously
by the IRQ helper. Additionally, dev->irq is not set correctly until after
postinstall and so was always zero here, triggering a warning in 4.15.
Fix both by moving the enable to the power management resume path, where we
know there was a previous disable invocation during suspend.
Fixes: 253696ccd6 ("drm/vc4: Account for interrupts in flight")
Signed-off-by: Stefan Schake <stschake@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1514563543-32511-1-git-send-email-stschake@gmail.com
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Synchronously disable the IRQ to make the following cancel_work_sync
invocation effective.
An interrupt in flight could enqueue further overflow mem work. As we
free the binner BO immediately following vc4_irq_uninstall this caused
a NULL pointer dereference in the work callback vc4_overflow_mem_work.
Link: https://github.com/anholt/linux/issues/114
Signed-off-by: Stefan Schake <stschake@gmail.com>
Fixes: d5b1a78a77 ("drm/vc4: Add support for drawing 3D frames.")
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1510275907-993-2-git-send-email-stschake@gmail.com
Until now, we've had to limit Raspberry Pi to 256MB of CMA memory to
keep from triggering the hardware addressing bug between the tile
binner and the tile alloc memory (where the top 4 bits come from the
tile state data array's address).
To work around that and allow more memory to be reserved for graphics,
allocate a single BO to store tile state data arrays and tile
alloc/overflow memory while the GPU is active, and make sure that that
one BO doesn't happen to cross a 256MB boundary. With that in place,
we can allocate textures and shaders anywhere in system memory (still
contiguous, of course).
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170327231025.19391-1-eric@anholt.net
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
This is needed for proper synchronization with display on another DRM
device (pl111 or tinydrm) with buffers produced by vc4 V3D. Fixes the
new igt vc4_dmabuf_poll testcase, and rendering of one of the glmark2
desktop tests on pl111+vc4.
This doesn't yet introduce waits on another device's fences before
vc4's rendering/display, because I don't have testcases for them.
v2: Reuse dma_fence_free(), retitle commit message to clarify that
it's not a full dma-buf fencing implementation yet.
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170412191202.22740-6-eric@anholt.net
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Overflow memory handling is tricky: While it's still referenced by the
BPO registers, we want to keep it from being freed. When we are
putting a new set of overflow memory in the registers, we need to
assign the old one to the last rendering job using it.
We were looking at "what's currently running in the binner", but since
the bin/render submission split, we may end up with the binner
completing and having no new job while the renderer is still
processing. So, if we don't find a bin job at all, look at the
highest-seqno (last) render job to attach our overflow to.
Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: ca26d28bba ("drm/vc4: improve throughput by pipelining binning and rendering jobs")
Cc: stable@vger.kernel.org
The hardware provides us with separate threads for binning and
rendering, and the existing model waits for them both to complete
before submitting the next job.
Splitting the binning and rendering submissions reduces idle time and
gives us approx 20-30% speedup with some x11perf tests such as -line10
and -tilerect1. Improves openarena performance by 1.01897% +/-
0.247857% (n=16).
Thanks to anholt for suggesting this.
v2: Rebase on the spurious resets fix (change by anholt).
Signed-off-by: Varad Gautam <varadgautam@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
The user submission is basically a pointer to a command list and a
pointer to uniforms. We copy those in to the kernel, validate and
relocate them, and store the result in a GPU BO which we queue for
execution.
v2: Drop support for NV shader recs (not necessary for GL), simplify
vc4_use_bo(), improve bin flush/semaphore checks, use __u32 style
types.
Signed-off-by: Eric Anholt <eric@anholt.net>
Paul Kocialkowski