The interrupt thread handler currently loops forever to process outstanding
completions. This causes either an "irq X: nobody cared" kernel splat or
the NMI watchdog kicks in due to running too long in the function. The irq
thread handler is expected to run again after exiting if there are
interrupts fired while the thread handler is running. So the handler code
can process all the completed I/O in a single pass and exit without losing
the follow on completed I/O.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162802977005.3084234.11836261157026497585.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The block on fault flag is not cleared when we disable or reset wq. This
causes it to remain set if the user does not clear it on the next
configuration load. Add clear of flag in dxd_wq_disable_cleanup()
routine.
Fixes: da32b28c95 ("dmaengine: idxd: cleanup workqueue config after disabling")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162803023553.3086015.8158952172068868803.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
'device_driver_attach()' dereferences its first argument (i.e. 'alt_drv')
so it must not be NULL.
Simplify the error handling logic about NULL 'alt_drv' in order to be
more robust and future-proof.
Fixes: 568b212646 ("dmaengine: idxd: fix uninit var for alt_drv")
Fixes: 6e7f3ee97b ("dmaengine: idxd: move dsa_drv support to compatible mode")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/77f0dc4f3966591d1f0cffb614a94085f8895a85.1627560174.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Coverity static analysis of linux-next found issue.
The check (status == IDXD_COMP_DESC_ABORT) is always false since status
was previously masked with 0x7f and IDXD_COMP_DESC_ABORT is 0xff.
Fixes: 6b4b87f2c3 ("dmaengine: idxd: fix submission race window")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162698465160.3560828.18173186265683415384.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Enabling device and wq returns standard errno and that does not provide
enough details to indicate what exactly failed. The hardware command status
is only 8bits. Expand the command status to 32bits and use the upper 16
bits to define software errors to provide more details on the exact
failure. Bit 31 will be used to indicate the error is software set as the
driver is using some of the spec defined hardware error as well.
Cc: Ramesh Thomas <ramesh.thomas@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162681373579.1968485.5891788397526827892.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The device submission portal is on a 4k page and any of those 64bit aligned
address on the page can be used for descriptor submission. By rotating the
offset through the 4k range and prevent successive writes to the same MMIO
address, performance improvement is observed through testing.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162681372446.1968485.10634280461681015569.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The sbitmap wait and allocate routine checks the index that is returned
from sbitmap_queue_get(). It should be idxd >= 0 as 0 is also a valid
index. This fixes issue where submission path hangs when WQ size is 1.
Fixes: 0705107fcc ("dmaengine: idxd: move submission to sbitmap_queue")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162697645067.3478714.506720687816951762.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
0-day detected uninitialized alt_drv variable in the bind_store() function.
The branch can be taken when device is not idxd device or wq 'struct
device'. Init alt_drv to NULL.
Fixes: 6e7f3ee97b ("dmaengine: idxd: move dsa_drv support to compatible mode")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162689250332.2114335.636367120454420852.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Set GRPCFG traffic class to value of 1 for best performance on current
generation of accelerators. Also add override option to allow experimentation.
Sysfs knobs are disabled for DSA/IAX gen1 devices.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162681373005.1968485.3761065664382799202.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Tag for other trees/branches to pull from in order to have a stable
place to build off of if they want to add new busses for 5.15.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYPkvsg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yl8pwCff+mL/zOaU8M1KwIHrEvNH6LgF58AoKgBAeCb
58Lenmw44ofP5itzU5x3
=J5mO
-----END PGP SIGNATURE-----
Merge tag 'bus_remove_return_void-5.15' into next
This helps to remove conflict on idxd driver
Conflicts:
drivers/dma/idxd/sysfs.c
drivers/dma/idxd/bus.c
Greg says:
Bus: Make remove callback return void tag
Tag for other trees/branches to pull from in order to have a stable
place to build off of if they want to add new busses for 5.15.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The driver core ignores the return value of this callback because there
is only little it can do when a device disappears.
This is the final bit of a long lasting cleanup quest where several
buses were converted to also return void from their remove callback.
Additionally some resource leaks were fixed that were caused by drivers
returning an error code in the expectation that the driver won't go
away.
With struct bus_type::remove returning void it's prevented that newly
implemented buses return an ignored error code and so don't anticipate
wrong expectations for driver authors.
Reviewed-by: Tom Rix <trix@redhat.com> (For fpga)
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com> (For drivers/s390 and drivers/vfio)
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> (For ARM, Amba and related parts)
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Chen-Yu Tsai <wens@csie.org> (for sunxi-rsb)
Acked-by: Pali Rohár <pali@kernel.org>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> (for media)
Acked-by: Hans de Goede <hdegoede@redhat.com> (For drivers/platform)
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Juergen Gross <jgross@suse.com> (For xen)
Acked-by: Lee Jones <lee.jones@linaro.org> (For mfd)
Acked-by: Johannes Thumshirn <jth@kernel.org> (For mcb)
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> (For slimbus)
Acked-by: Kirti Wankhede <kwankhede@nvidia.com> (For vfio)
Acked-by: Maximilian Luz <luzmaximilian@gmail.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> (For ulpi and typec)
Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> (For ipack)
Acked-by: Geoff Levand <geoff@infradead.org> (For ps3)
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> (For thunderbolt)
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> (For intel_th)
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> (For pcmcia)
Acked-by: Rafael J. Wysocki <rafael@kernel.org> (For ACPI)
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> (rpmsg and apr)
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> (For intel-ish-hid)
Acked-by: Dan Williams <dan.j.williams@intel.com> (For CXL, DAX, and NVDIMM)
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> (For isa)
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (For firewire)
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> (For hid)
Acked-by: Thorsten Scherer <t.scherer@eckelmann.de> (For siox)
Acked-by: Sven Van Asbroeck <TheSven73@gmail.com> (For anybuss)
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (For MMC)
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210713193522.1770306-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kernel memory are pinned and will not cause faults. Since the driver
does not support interrupts for user descriptors, no fault errors are
expected to come through the misc interrupt. Remove dead code.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162630502789.631986.10591230961790023856.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The original architecture of /sys/bus/dsa invented a scheme whereby
a single entry in the list of bus drivers, /sys/bus/drivers/dsa,
handled all device types and internally routed them to different
different drivers. Those internal drivers were invisible to
userspace.
With the idxd driver transitioned to a proper bus device-driver model,
the legacy behavior needs to be preserved due to it being exposed to
user space via sysfs. Create a compat driver to provide the legacy
behavior for /sys/bus/dsa/drivers/dsa. This should satisfy user
tool accel-config v3.2 or ealier where this behavior is expected.
If the distro has a newer accel-config then the legacy mode does
not need to be enabled.
When the compat driver binds the device (i.e. dsa0) to the dsa driver,
it will be bound to the new idxd_drv. The wq device (i.e. wq0.0) will
be bound to either the dmaengine_drv or the user_drv. The dsa_drv
becomes a routing mechansim for the new drivers. It will not support
additional external drivers that are implemented later.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637468705.744545.4399080971745974435.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In preparation for dsa_drv compat support to be built-in, move the bus
code to its own compilation unit. A follow-on patch adds the compat
implementation. Recall that the compat implementation allows for the
deprecated / omnibus dsa_drv binding scheme rather than the idiomatic
organization of a full fledged bus driver per driver type.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637468142.744545.2811632736881720857.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The original architecture of /sys/bus/dsa invented a scheme whereby a
single entry in the list of bus drivers, /sys/bus/drivers/dsa, handled
all device types and internally routed them to different drivers.
Those internal drivers were invisible to userspace. Now, as
/sys/bus/dsa wants to grow support for alternate drivers for a given
device, for example vfio-mdev instead of kernel-internal-dmaengine, a
proper bus device-driver model is needed. The first step in that process
is separating the existing omnibus/implicit "dsa" driver into proper
individual drivers registered on /sys/bus/dsa. Establish the
idxd_user_drv driver that controls the enabling and disabling of the
wq and also register and unregister a char device to allow user space
to mmap the descriptor submission portal.
The cdev related bits are moved to the cdev driver probe/remove and out of
the drv_enabe/disable_wq() calls. These bits are exclusive to the cdev
operation and not part of the generic enable/disable of the wq device.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637467578.744545.10203997610072341376.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The original architecture of /sys/bus/dsa invented a scheme whereby a
single entry in the list of bus drivers, /sys/bus/drivers/dsa, handled
all device types and internally routed them to different drivers.
Those internal drivers were invisible to userspace. Now, as
/sys/bus/dsa wants to grow support for alternate drivers for a given
device, for example vfio-mdev instead of kernel-internal-dmaengine, a
proper bus device-driver model is needed. The first step in that process
is separating the existing omnibus/implicit "dsa" driver into proper
individual drivers registered on /sys/bus/dsa. Establish the
idxd_dmaengine_drv driver that controls the enabling and disabling of the
wq and also register and unregister the dma channel.
idxd_wq_alloc_resources() and idxd_wq_free_resources() also get moved to
the dmaengine driver. The resources (dma descriptors allocation and setup)
are only used by the dmaengine driver and should only happen when it loads.
The char dev driver (cdev) related bits are left in the __drv_enable_wq()
and __drv_disable_wq() calls to be moved when we split out the char dev
driver just like how the dmaengine driver is split out.
WQ autoload support is not expected currently. With the amount of
configuration needed for the device, the wq is always expected to
be enabled by a tool (or via sysfs) rather than auto enabled at driver
load.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637467033.744545.12330636655625405394.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The original architecture of /sys/bus/dsa invented a scheme whereby a
single entry in the list of bus drivers, /sys/bus/drivers/dsa, handled
all device types and internally routed them to different drivers.
Those internal drivers were invisible to userspace. Now, as
/sys/bus/dsa wants to grow support for alternate drivers for a given
device, for example vfio-mdev instead of kernel-internal-dmaengine, a
proper bus device-driver model is needed. The first step in that process
is separating the existing omnibus/implicit "dsa" driver into proper
individual drivers registered on /sys/bus/dsa. Establish the idxd_drv
driver that control the enabling and disabling of the accelerator device.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637466439.744545.15210886092627144577.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add an array of support device types to the idxd_device_driver
definition in order to enable simple matching of device type to a
given driver. The deprecated / omnibus dsa_drv driver specifies
IDXD_DEV_NONE as its only role is to service legacy userspace (old
accel-config) directed bind requests and route them to them the proper
driver. It need not attach to a device when the bus is autoprobed. The
accel-config tooling is being updated to drop its dependency on this
deprecated bind scheme.
Reviewed-by: Dan Willliams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637465882.744545.17456174666211577867.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Current implementation have put all the code that should be in a driver
probe/remove in the bus probe/remove function. Add ->probe() and ->remove()
support for the dsa_drv and move all those code out of bus probe/remove.
The change does not split out the distinction between device sub-driver and
wq sub-driver. It only cleans up the bus calls. The split out will be
addressed in follow on patches.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637463586.744545.5806250155539938643.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The IDXD_DEV_CONF_READY state flag is no longer needed. The current
implementation uses this flag to stop the device from doing
configuration until the pci driver probe has completed. With the
driver architecture going towards multiple sub-driver attached to
the dsa_bus, this is no longer feasible. The sub-drivers will be
allowed to probe and return with failure when they are not ready
to complete the probe rather than using a state flag to gate the
probing.
There is no expectation that the devices auto-attach to a driver.
Userspace configuration is expected to setup the device before
enabling.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637460633.744545.8902095097471365420.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add a 'struct idxd_dev' that wraps the 'struct device' for idxd conf_dev
that registers with the dsa bus. This is introduced in order to deal with
multiple different types of 'devices' that are registered on the dsa_bus
when the compat driver needs to route them to the correct driver to attach.
The bind() call now can determine the type of device and then do the
appropriate driver matching.
Reviewed-by Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637460065.744545.584492831446090984.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add helper functions for dsa-driver registration similar to other
bus-types. In particular, do not require dsa-drivers to open-code the
bus, owner, and mod_name fields. Let registration and unregistration
operate on the 'struct idxd_device_driver' instead of the raw /
embedded 'struct device_driver'.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637458949.744545.14996726325385482050.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
->shutdown() call should only be responsible for quiescing the device.
Currently it is doing PCI device tear down. This causes issue when things
like MMIO mapping is removed while idxd_unregister_devices() will trigger
removal of idxd device sub-driver and still initiates MMIO writes to the
device. Another issue is with the unregistering of idxd 'struct device',
the memory context gets freed. So the teardown calls are accessing freed
memory and can cause kernel oops. Move all the teardown bits that doesn't
belong in shutdown to ->remove() call. Move unregistering of the idxd
conf_dev 'struct device' to after doing all the teardown to free all
the memory that's no longer needed.
Fixes: 47c16ac27d ("dmaengine: idxd: fix idxd conf_dev 'struct device' lifetime")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162629983901.395844.17964803190905549615.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Konstantin observed that when descriptors are submitted, the descriptor is
added to the pending list after the submission. This creates a race window
with the slight possibility that the descriptor can complete before it
gets added to the pending list and this window would cause the completion
handler to miss processing the descriptor.
To address the issue, the addition of the descriptor to the pending list
must be done before it gets submitted to the hardware. However, submitting
to swq with ENQCMDS instruction can cause a failure with the condition of
either wq is full or wq is not "active".
With the descriptor allocation being the gate to the wq capacity, it is not
possible to hit a retry with ENQCMDS submission to the swq. The only
possible failure can happen is when wq is no longer "active" due to hw
error and therefore we are moving towards taking down the portal. Given
this is a rare condition and there's no longer concern over I/O
performance, the driver can walk the completion lists in order to retrieve
and abort the descriptor.
The error path will set the descriptor to aborted status. It will take the
work list lock to prevent further processing of worklist. It will do a
delete_all on the pending llist to retrieve all descriptors on the pending
llist. The delete_all action does not require a lock. It will walk through
the acquired llist to find the aborted descriptor while add all remaining
descriptors to the work list since it holds the lock. If it does not find
the aborted descriptor on the llist, it will walk through the work
list. And if it still does not find the descriptor, then it means the
interrupt handler has removed the desc from the llist but is pending on
the work list lock and will process it once the error path releases the
lock.
Fixes: eb15e7154f ("dmaengine: idxd: add interrupt handle request and release support")
Reported-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162628855747.360485.10101925573082466530.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
->shutdown() call should only be responsible for quiescing the device.
Currently it is doing PCI device tear down. This causes issue when things
like MMIO mapping is removed while idxd_unregister_devices() will trigger
removal of idxd device sub-driver and still initiates MMIO writes to the
device. Another issue is with the unregistering of idxd 'struct device',
the memory context gets freed. So the teardown calls are accessing freed
memory and can cause kernel oops. Move all the teardown bits that doesn't
belong in shutdown to ->remove() call. Move unregistering of the idxd
conf_dev 'struct device' to after doing all the teardown to free all
the memory that's no longer needed.
Fixes: 47c16ac27d ("dmaengine: idxd: fix idxd conf_dev 'struct device' lifetime")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162629983901.395844.17964803190905549615.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
IOPS increased when changing MSIX vector to per WQ from roundrobin.
Allows descriptor to be completed by the submitter improves caching
locality.
Suggested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Link: https://lore.kernel.org/r/162456717326.1130457.15258077196523268356.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When enqcmds() fails, exit path is missing a percpu_ref_put(). This can
cause failure on shutdown path when the driver is attempting to quiesce the
wq. Add missing percpu_ref_put() call on the error exit path.
Fixes: 93a40a6d74 ("dmaengine: idxd: add percpu_ref to descriptor submission path")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162456170168.1121236.7240941044089212312.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The MSIX permission table should be programmed BEFORE request_irq()
happens. This prevents any possibility of an interrupt happening before the
MSIX perm table is setup, however slight.
Fixes: 6df0e6c57d ("dmaengine: idxd: clear MSIX permission entry on shutdown")
Sign-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162456741222.1138073.1298447364671237896.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The index to the irq vector should be local and has no relation to
the assigned interrupt handle. Assign the MSIX interrupt index that is
programmed for the descriptor. The interrupt handle only matters when it
comes to hardware descriptor programming.
Fixes: eb15e7154f ("dmaengine: idxd: add interrupt handle request and release support")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162456176939.1121476.3366256009925001897.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The cached command status is only set when the write back status is
is passed in. Move the variable set outside of the check so it is
always set.
Fixes: 0d5c10b4c8 ("dmaengine: idxd: add work queue drain support")
Reported-by: Ramesh Thomas <ramesh.thomas@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162274329740.1822314.3443875665504707588.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add occupancy information to wq sysfs attribute. Attribute will show
wq occupancy data if "WQ Occupancy Support" field in WQCAP is 1. It
displays the number of entries currently in this WQ. This is provided
as an estimate and should not be relied on to determine whether there
is space in the WQ. The data is to provide information to user apps
for flow control.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162275745546.1857062.8765615879420582018.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The previous state cleanup patch only performed wq state cleanups. This
does not go far enough as when device is disabled or reset, the state
for groups and engines must also be cleaned up. Add additional state
cleanup beyond wq cleanup. Tie those cleanups directly to device
disable and reset, and wq disable and reset.
Fixes: da32b28c95 ("dmaengine: idxd: cleanup workqueue config after disabling")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162285154108.2096632.5572805472362321307.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The wrappers in include/linux/pci-dma-compat.h should go away.
Replace 'pci_set_dma_mask/pci_set_consistent_dma_mask' by an equivalent
and less verbose 'dma_set_mask_and_coherent()' call.
Even if the code may look different, it should have exactly the same
run-time behavior.
If pci_set_dma_mask(64) fails and pci_set_dma_mask(32) succeeds, then
pci_set_consistent_dma_mask(64) will also fail.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/70c8a3bc67e41c5fefb526ecd64c5174c1e2dc76.1625720835.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
New drivers/devices
- Support for QCOM SM8250 GPI DMA
- removal of shdma-of driver and binding
Updates:
- arm-pl08x yaml binding move
- altera-msgdma gained DT support
- removal of imx-sdma platform data support
- idxd and xilinx driver updates
-----BEGIN PGP SIGNATURE-----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=yltL
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"This time around we have a smaller pull request than usual and this
includes code removal, so should be good!
New drivers/devices
- Support for QCOM SM8250 GPI DMA
- removal of shdma-of driver and binding
Updates:
- arm-pl08x yaml binding move
- altera-msgdma gained DT support
- removal of imx-sdma platform data support
- idxd and xilinx driver updates"
* tag 'dmaengine-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (22 commits)
dmaengine: imx-sdma: Remove platform data header
dmaengine: xilinx: dpdma: Fix spacing around addr[i-1]
dmaengine: xilinx: dpdma: Use kernel type u32 over uint32_t
dmaengine: altera-msgdma: add OF support
MAINTAINERS: add entry for Altera mSGDMA
dt-bindings: dma: add schema for altera-msgdma
dmaengine: xilinx: dpdma: fix kernel-doc
dmaengine: sf-pdma: apply proper spinlock flags in sf_pdma_prep_dma_memcpy()
dmaengine: sh: Remove unused shdma-of driver
dt-bindings: dmaengine: Remove SHDMA Device Tree bindings
dmaengine: qcom: gpi: Add SM8250 compatible
dt-bindings: dmaengine: qcom: gpi: add compatible for sm8250
dmaengine: sun4i: Use list_move_tail instead of list_del/list_add_tail
dmaengine: ti: omap-dma: Skip pointless cpu_pm context restore on errors
dmaengine: hsu: Account transferred bytes
dmaengine: Move kdoc description of struct dma_chan_percpu closer to it
dmaengine: xilinx: dpdma: Print debug message when losing vsync race
dmaengine: xilinx: dpdma: Print channel number in kernel log messages
dt-bindings: dma: convert arm-pl08x to yaml
dmaengine: idxd: remove devm allocation for idxd->int_handles
...
Bunch of driver fixes, notably:
- More idxd fixes for driver unregister, error handling and bus
assignment
- HAS_IOMEM depends fix for few drivers
- lock fix in pl330 driver
- xilinx drivers fixes for initialize registers, missing dependencies
and limiting descriptor IDs
- mediatek descriptor management fixes
-----BEGIN PGP SIGNATURE-----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=FL1v
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-fix-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
"A bunch of driver fixes, notably:
- More idxd fixes for driver unregister, error handling and bus
assignment
- HAS_IOMEM depends fix for few drivers
- lock fix in pl330 driver
- xilinx drivers fixes for initialize registers, missing dependencies
and limiting descriptor IDs
- mediatek descriptor management fixes"
* tag 'dmaengine-fix-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: mediatek: use GFP_NOWAIT instead of GFP_ATOMIC in prep_dma
dmaengine: mediatek: do not issue a new desc if one is still current
dmaengine: mediatek: free the proper desc in desc_free handler
dmaengine: ipu: fix doc warning in ipu_irq.c
dmaengine: rcar-dmac: Fix PM reference leak in rcar_dmac_probe()
dmaengine: idxd: Fix missing error code in idxd_cdev_open()
dmaengine: stedma40: add missing iounmap() on error in d40_probe()
dmaengine: SF_PDMA depends on HAS_IOMEM
dmaengine: QCOM_HIDMA_MGMT depends on HAS_IOMEM
dmaengine: ALTERA_MSGDMA depends on HAS_IOMEM
dmaengine: idxd: Add missing cleanup for early error out in probe call
dmaengine: xilinx: dpdma: Limit descriptor IDs to 16 bits
dmaengine: xilinx: dpdma: Add missing dependencies to Kconfig
dmaengine: stm32-mdma: fix PM reference leak in stm32_mdma_alloc_chan_resourc()
dmaengine: zynqmp_dma: Fix PM reference leak in zynqmp_dma_alloc_chan_resourc()
dmaengine: xilinx: dpdma: initialize registers before request_irq
dmaengine: pl330: fix wrong usage of spinlock flags in dma_cyclc
dmaengine: fsl-dpaa2-qdma: Fix error return code in two functions
dmaengine: idxd: add missing dsa driver unregister
dmaengine: idxd: add engine 'struct device' missing bus type assignment
When testing x86 feature bits, use cpu_feature_enabled() so that
build-disabled features can remain off, regardless of what CPUID says.
Fixes: 8e50d39265 ("dmaengine: idxd: Add shared workqueue support")
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-By: Vinod Koul <vkoul@kernel.org>
Cc: <stable@vger.kernel.org>
The error code is missing in this code scenario, add the error code
'-EINVAL' to the return value 'rc'.
Eliminate the follow smatch warning:
drivers/dma/idxd/cdev.c:113 idxd_cdev_open() warn: missing error code
'rc'.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/1622628446-87909-1-git-send-email-jiapeng.chong@linux.alibaba.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Dave Jiang