Commit Graph

79 Commits

Author SHA1 Message Date
Linus Torvalds 0313bc278d Revert "random: block in /dev/urandom"
This reverts commit 6f98a4bfee.

It turns out we still can't do this.  Way too many platforms that don't
have any real source of randomness at boot and no jitter entropy because
they don't even have a cycle counter.

As reported by Guenter Roeck:

 "This causes a large number of qemu boot test failures for various
  architectures (arm, m68k, microblaze, sparc32, xtensa are the ones I
  observed).

  Common denominator is that boot hangs at 'Saving random seed:'"

This isn't hugely unexpected - we tried it, it failed, so now we'll
revert it.

Link: https://lore.kernel.org/all/20220322155820.GA1745955@roeck-us.net/
Reported-and-bisected-by: Guenter Roeck <linux@roeck-us.net>
Cc: Jason Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22 09:17:20 -07:00
Jason A. Donenfeld f3c2682bad random: provide notifier for VM fork
Drivers such as WireGuard need to learn when VMs fork in order to clear
sessions. This commit provides a simple notifier_block for that, with a
register and unregister function. When no VM fork detection is compiled
in, this turns into a no-op, similar to how the power notifier works.

Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-03-12 18:00:56 -07:00
Jason A. Donenfeld 5acd35487d random: replace custom notifier chain with standard one
We previously rolled our own randomness readiness notifier, which only
has two users in the whole kernel. Replace this with a more standard
atomic notifier block that serves the same purpose with less code. Also
unexport the symbols, because no modules use it, only unconditional
builtins. The only drawback is that it's possible for a notification
handler returning the "stop" code to prevent further processing, but
given that there are only two users, and that we're unexporting this
anyway, that doesn't seem like a significant drawback for the
simplification we receive here.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-03-12 18:00:56 -07:00
Jason A. Donenfeld a4107d34f9 random: do not export add_vmfork_randomness() unless needed
Since add_vmfork_randomness() is only called from vmgenid.o, we can
guard it in CONFIG_VMGENID, similarly to how we do with
add_disk_randomness() and CONFIG_BLOCK. If we ever have multiple things
calling into add_vmfork_randomness(), we can add another shared Kconfig
symbol for that, but for now, this is good enough. Even though
add_vmfork_randomess() is a pretty small function, removing it means
that there are only calls to crng_reseed(false) and none to
crng_reseed(true), which means the compiler can constant propagate the
false, removing branches from crng_reseed() and its descendants.

Additionally, we don't even need the symbol to be exported if
CONFIG_VMGENID is not a module, so conditionalize that too.

Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-03-12 18:00:56 -07:00
Jason A. Donenfeld ae099e8e98 random: add mechanism for VM forks to reinitialize crng
When a VM forks, we must immediately mix in additional information to
the stream of random output so that two forks or a rollback don't
produce the same stream of random numbers, which could have catastrophic
cryptographic consequences. This commit adds a simple API, add_vmfork_
randomness(), for that, by force reseeding the crng.

This has the added benefit of also draining the entropy pool and setting
its timer back, so that any old entropy that was there prior -- which
could have already been used by a different fork, or generally gone
stale -- does not contribute to the accounting of the next 256 bits.

Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Jann Horn <jannh@google.com>
Cc: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-03-12 18:00:56 -07:00
Jason A. Donenfeld 6f98a4bfee random: block in /dev/urandom
This topic has come up countless times, and usually doesn't go anywhere.
This time I thought I'd bring it up with a slightly narrower focus,
updated for some developments over the last three years: we finally can
make /dev/urandom always secure, in light of the fact that our RNG is
now always seeded.

Ever since Linus' 50ee7529ec ("random: try to actively add entropy
rather than passively wait for it"), the RNG does a haveged-style jitter
dance around the scheduler, in order to produce entropy (and credit it)
for the case when we're stuck in wait_for_random_bytes(). How ever you
feel about the Linus Jitter Dance is beside the point: it's been there
for three years and usually gets the RNG initialized in a second or so.

As a matter of fact, this is what happens currently when people use
getrandom(). It's already there and working, and most people have been
using it for years without realizing.

So, given that the kernel has grown this mechanism for seeding itself
from nothing, and that this procedure happens pretty fast, maybe there's
no point any longer in having /dev/urandom give insecure bytes. In the
past we didn't want the boot process to deadlock, which was
understandable. But now, in the worst case, a second goes by, and the
problem is resolved. It seems like maybe we're finally at a point when
we can get rid of the infamous "urandom read hole".

The one slight drawback is that the Linus Jitter Dance relies on random_
get_entropy() being implemented. The first lines of try_to_generate_
entropy() are:

	stack.now = random_get_entropy();
	if (stack.now == random_get_entropy())
		return;

On most platforms, random_get_entropy() is simply aliased to get_cycles().
The number of machines without a cycle counter or some other
implementation of random_get_entropy() in 2022, which can also run a
mainline kernel, and at the same time have a both broken and out of date
userspace that relies on /dev/urandom never blocking at boot is thought
to be exceedingly low. And to be clear: those museum pieces without
cycle counters will continue to run Linux just fine, and even
/dev/urandom will be operable just like before; the RNG just needs to be
seeded first through the usual means, which should already be the case
now.

On systems that really do want unseeded randomness, we already offer
getrandom(GRND_INSECURE), which is in use by, e.g., systemd for seeding
their hash tables at boot. Nothing in this commit would affect
GRND_INSECURE, and it remains the means of getting those types of random
numbers.

This patch goes a long way toward eliminating a long overdue userspace
crypto footgun. After several decades of endless user confusion, we will
finally be able to say, "use any single one of our random interfaces and
you'll be fine. They're all the same. It doesn't matter." And that, I
think, is really something. Finally all of those blog posts and
disagreeing forums and contradictory articles will all become correct
about whatever they happened to recommend, and along with it, a whole
class of vulnerabilities eliminated.

With very minimal downside, we're finally in a position where we can
make this change.

Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Guo Ren <guoren@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Joshua Kinard <kumba@gentoo.org>
Cc: David Laight <David.Laight@aculab.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Cc: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-03-12 18:00:55 -07:00
Jason A. Donenfeld 3191dd5a11 random: clear fast pool, crng, and batches in cpuhp bring up
For the irq randomness fast pool, rather than having to use expensive
atomics, which were visibly the most expensive thing in the entire irq
handler, simply take care of the extreme edge case of resetting count to
zero in the cpuhp online handler, just after workqueues have been
reenabled. This simplifies the code a bit and lets us use vanilla
variables rather than atomics, and performance should be improved.

As well, very early on when the CPU comes up, while interrupts are still
disabled, we clear out the per-cpu crng and its batches, so that it
always starts with fresh randomness.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Sultan Alsawaf <sultan@kerneltoast.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-02-21 21:14:21 +01:00
Jason A. Donenfeld b777c38239 random: pull add_hwgenerator_randomness() declaration into random.h
add_hwgenerator_randomness() is a function implemented and documented
inside of random.c. It is the way that hardware RNGs push data into it.
Therefore, it should be declared in random.h. Otherwise sparse complains
with:

random.c:1137:6: warning: symbol 'add_hwgenerator_randomness' was not declared. Should it be static?

The alternative would be to include hw_random.h into random.c, but that
wouldn't really be good for anything except slowing down compile time.

Cc: Matt Mackall <mpm@selenic.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-02-21 21:14:21 +01:00
Jason A. Donenfeld 6071a6c0fb random: remove useless header comment
This really adds nothing at all useful.

Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-02-21 21:14:04 +01:00
Jason A. Donenfeld 04ec96b768 random: make more consistent use of integer types
We've been using a flurry of int, unsigned int, size_t, and ssize_t.
Let's unify all of this into size_t where it makes sense, as it does in
most places, and leave ssize_t for return values with possible errors.

In addition, keeping with the convention of other functions in this
file, functions that are dealing with raw bytes now take void *
consistently instead of a mix of that and u8 *, because much of the time
we're actually passing some other structure that is then interpreted as
bytes by the function.

We also take the opportunity to fix the outdated and incorrect comment
in get_random_bytes_arch().

Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Jann Horn <jannh@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-02-21 21:13:54 +01:00
Sebastian Andrzej Siewior 703f7066f4 random: remove unused irq_flags argument from add_interrupt_randomness()
Since commit
   ee3e00e9e7 ("random: use registers from interrupted code for CPU's w/o a cycle counter")

the irq_flags argument is no longer used.

Remove unused irq_flags.

Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: linux-hyperv@vger.kernel.org
Cc: x86@kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-01-07 00:25:25 +01:00
Linus Torvalds c0842fbc1b random32: move the pseudo-random 32-bit definitions to prandom.h
The addition of percpu.h to the list of includes in random.h revealed
some circular dependencies on arm64 and possibly other platforms.  This
include was added solely for the pseudo-random definitions, which have
nothing to do with the rest of the definitions in this file but are
still there for legacy reasons.

This patch moves the pseudo-random parts to linux/prandom.h and the
percpu.h include with it, which is now guarded by _LINUX_PRANDOM_H and
protected against recursive inclusion.

A further cleanup step would be to remove this from <linux/random.h>
entirely, and make people who use the prandom infrastructure include
just the new header file.  That's a bit of a churn patch, but grepping
for "prandom_" and "next_pseudo_random32" "struct rnd_state" should
catch most users.

But it turns out that that nice cleanup step is fairly painful, because
a _lot_ of code currently seems to depend on the implicit include of
<linux/random.h>, which can currently come in a lot of ways, including
such fairly core headfers as <linux/net.h>.

So the "nice cleanup" part may or may never happen.

Fixes: 1c9df907da ("random: fix circular include dependency on arm64 after addition of percpu.h")
Tested-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-03 23:24:26 -07:00
Willy Tarreau 1c9df907da random: fix circular include dependency on arm64 after addition of percpu.h
Daniel Díaz and Kees Cook independently reported that commit
f227e3ec3b ("random32: update the net random state on interrupt and
activity") broke arm64 due to a circular dependency on include files
since the addition of percpu.h in random.h.

The correct fix would definitely be to move all the prandom32 stuff out
of random.h but for backporting, a smaller solution is preferred.

This one replaces linux/percpu.h with asm/percpu.h, and this fixes the
problem on x86_64, arm64, arm, and mips.  Note that moving percpu.h
around didn't change anything and that removing it entirely broke
differently.  When backporting, such options might still be considered
if this patch fails to help.

[ It turns out that an alternate fix seems to be to just remove the
  troublesome <asm/pointer_auth.h> remove from the arm64 <asm/smp.h>
  that causes the circular dependency.

  But we might as well do the whole belt-and-suspenders thing, and
  minimize inclusion in <linux/random.h> too. Either will fix the
  problem, and both are good changes.   - Linus ]

Reported-by: Daniel Díaz <daniel.diaz@linaro.org>
Reported-by: Kees Cook <keescook@chromium.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Fixes: f227e3ec3b
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-07-30 09:15:17 -07:00
Linus Torvalds 83bdc7275e random32: remove net_rand_state from the latent entropy gcc plugin
It turns out that the plugin right now ends up being really unhappy
about the change from 'static' to 'extern' storage that happened in
commit f227e3ec3b ("random32: update the net random state on interrupt
and activity").

This is probably a trivial fix for the latent_entropy plugin, but for
now, just remove net_rand_state from the list of things the plugin
worries about.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Emese Revfy <re.emese@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-07-29 19:11:00 -07:00
Willy Tarreau f227e3ec3b random32: update the net random state on interrupt and activity
This modifies the first 32 bits out of the 128 bits of a random CPU's
net_rand_state on interrupt or CPU activity to complicate remote
observations that could lead to guessing the network RNG's internal
state.

Note that depending on some network devices' interrupt rate moderation
or binding, this re-seeding might happen on every packet or even almost
never.

In addition, with NOHZ some CPUs might not even get timer interrupts,
leaving their local state rarely updated, while they are running
networked processes making use of the random state.  For this reason, we
also perform this update in update_process_times() in order to at least
update the state when there is user or system activity, since it's the
only case we care about.

Reported-by: Amit Klein <aksecurity@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-07-29 10:35:37 -07:00
Mark Rutland 253d3194c2 random: add arch_get_random_*long_early()
Some architectures (e.g. arm64) can have heterogeneous CPUs, and the
boot CPU may be able to provide entropy while secondary CPUs cannot. On
such systems, arch_get_random_long() and arch_get_random_seed_long()
will fail unless support for RNG instructions has been detected on all
CPUs. This prevents the boot CPU from being able to provide
(potentially) trusted entropy when seeding the primary CRNG.

To make it possible to seed the primary CRNG from the boot CPU without
adversely affecting the runtime versions of arch_get_random_long() and
arch_get_random_seed_long(), this patch adds new early versions of the
functions used when initializing the primary CRNG.

Default implementations are provided atop of the existing
arch_get_random_long() and arch_get_random_seed_long() so that only
architectures with such constraints need to provide the new helpers.

There should be no functional change as a result of this patch.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20200210130015.17664-3-mark.rutland@arm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-02-27 23:21:52 -05:00
Richard Henderson 904caa6413 linux/random.h: Mark CONFIG_ARCH_RANDOM functions __must_check
We must not use the pointer output without validating the
success of the random read.

Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200110145422.49141-7-broonie@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-01-25 12:18:50 -05:00
Richard Henderson 66f5ae899a linux/random.h: Use false with bool
Keep the generic fallback versions in sync with the other architecture
specific implementations and use the proper name for false.

Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200110145422.49141-6-broonie@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-01-25 12:18:50 -05:00
Richard Henderson 647f50d5d9 linux/random.h: Remove arch_has_random, arch_has_random_seed
The arm64 version of archrandom.h will need to be able to test for
support and read the random number without preemption, so a separate
query predicate is not practical.

Since this part of the generic interface is unused, remove it.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200110145422.49141-5-broonie@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-01-25 12:18:50 -05:00
Hsin-Yi Wang 428826f535 fdt: add support for rng-seed
Introducing a chosen node, rng-seed, which is an entropy that can be
passed to kernel called very early to increase initial device
randomness. Bootloader should provide this entropy and the value is
read from /chosen/rng-seed in DT.

Obtain of_fdt_crc32 for CRC check after early_init_dt_scan_nodes(),
since early_init_dt_scan_chosen() would modify fdt to erase rng-seed.

Add a new interface add_bootloader_randomness() for rng-seed use case.
Depends on whether the seed is trustworthy, rng seed would be passed to
add_hwgenerator_randomness(). Otherwise it would be passed to
add_device_randomness(). Decision is controlled by kernel config
RANDOM_TRUST_BOOTLOADER.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Theodore Ts'o <tytso@mit.edu> # drivers/char/random.c
Signed-off-by: Will Deacon <will@kernel.org>
2019-08-23 16:39:26 +01:00
Linus Torvalds 80111bfb67 s390 updates for the 5.2 merge window #2
- Enhancements for the QDIO layer
 
  - Remove the RCP trace event
 
  - Avoid three build issues
 
  - Move the defconfig to the configs directory
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQEcBAABCAAGBQJc3lk4AAoJEDjwexyKj9rgPXQH/06jspiNAiz2aZBvAxcfUku+
 b1yDNg2EivWYSbUtTPqvI3H5skANvc3N4Dnv6mYUcO/lpIWo6MdXW9lepxEP1yNb
 AdvVY/c1yMZjMdi2WYrhC8+mLtoFmgjIPSIBcmSsZ2j+5IwI0bB5UcOjzKlujhAY
 E1QGdlVB5hxCI7RZnCGdggqkjAPsVKYNl1zVgX2GO8UwprZbt1IzuWK4NgdmE/bh
 8SV1AGOjp/BGXNY+uj06b7DI5K19wwlv9yPdO+cv22HPqLvEvZU9xyIjBYTQy+/0
 LmtcZ91DLS7fWM45XE/2T1UPUDTophGsI1jVBLGlTOBYjYSMD2ijYN8MJd0+IlY=
 =/28O
 -----END PGP SIGNATURE-----

Merge tag 's390-5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull more s390 updates from Martin Schwidefsky:

 - Enhancements for the QDIO layer

 - Remove the RCP trace event

 - Avoid three build issues

 - Move the defconfig to the configs directory

* tag 's390-5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: move arch/s390/defconfig to arch/s390/configs/defconfig
  s390/qdio: optimize state inspection of HW-owned SBALs
  s390/qdio: use get_buf_state() in debug_get_buf_state()
  s390/qdio: allow to scan all Output SBALs in one go
  s390/cio: Remove tracing for rchp instruction
  s390/kasan: adapt disabled_wait usage to avoid build error
  latent_entropy: avoid build error when plugin cflags are not set
  s390/boot: fix compiler error due to missing awk strtonum
2019-05-17 10:08:59 -07:00
Vasily Gorbik 7e756f423a latent_entropy: avoid build error when plugin cflags are not set
Some architectures set up CFLAGS for linux decompressor phase from
scratch and do not include GCC_PLUGINS_CFLAGS. Since "latent_entropy"
variable declaration is generated by the plugin code itself including
linux/random.h in decompressor code then would cause a build
error. E.g. on s390:

In file included from ./include/linux/net.h:22,
                 from ./include/linux/skbuff.h:29,
                 from ./include/linux/if_ether.h:23,
                 from ./arch/s390/include/asm/diag.h:12,
                 from arch/s390/boot/startup.c:8:
./include/linux/random.h: In function 'add_latent_entropy':
./include/linux/random.h:26:39: error: 'latent_entropy' undeclared
(first use in this function); did you mean 'add_latent_entropy'?
   26 |  add_device_randomness((const void *)&latent_entropy,
      |                                       ^~~~~~~~~~~~~~
      |                                       add_latent_entropy
./include/linux/random.h:26:39: note: each undeclared identifier is
reported only once for each function it appears in

The build error is triggered by commit a80313ff91 ("s390/kernel:
introduce .dma sections") which made it into 5.2 merge window.

To address that avoid using CONFIG_GCC_PLUGIN_LATENT_ENTROPY in
favour of LATENT_ENTROPY_PLUGIN definition which is defined as a
part of gcc plugins cflags and hence reflect more accurately when gcc
plugin is active. Besides that it is also used for similar purpose in
linux/compiler-gcc.h for latent_entropy attribute definition.

Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-05-08 08:15:52 +02:00
Kees Cook d55535232c random: move rand_initialize() earlier
Right now rand_initialize() is run as an early_initcall(), but it only
depends on timekeeping_init() (for mixing ktime_get_real() into the
pools). However, the call to boot_init_stack_canary() for stack canary
initialization runs earlier, which triggers a warning at boot:

random: get_random_bytes called from start_kernel+0x357/0x548 with crng_init=0

Instead, this moves rand_initialize() to after timekeeping_init(), and moves
canary initialization here as well.

Note that this warning may still remain for machines that do not have
UEFI RNG support (which initializes the RNG pools during setup_arch()),
or for x86 machines without RDRAND (or booting without "random.trust=on"
or CONFIG_RANDOM_TRUST_CPU=y).

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-04-19 23:27:05 -04:00
Jason A. Donenfeld 9a47249d44 random: Make crng state queryable
It is very useful to be able to know whether or not get_random_bytes_wait
/ wait_for_random_bytes is going to block or not, or whether plain
get_random_bytes is going to return good randomness or bad randomness.

The particular use case is for mitigating certain attacks in WireGuard.
A handshake packet arrives and is queued up. Elsewhere a worker thread
takes items from the queue and processes them. In replying to these
items, it needs to use some random data, and it has to be good random
data. If we simply block until we can have good randomness, then it's
possible for an attacker to fill the queue up with packets waiting to be
processed. Upon realizing the queue is full, WireGuard will detect that
it's under a denial of service attack, and behave accordingly. A better
approach is just to drop incoming handshake packets if the crng is not
yet initialized.

This patch, therefore, makes that information directly accessible.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-08-02 17:33:06 -04:00
Tobin C. Harding 753d433b58 random: Return nbytes filled from hw RNG
Currently the function get_random_bytes_arch() has return value 'void'.
If the hw RNG fails we currently fall back to using get_random_bytes().
This defeats the purpose of requesting random material from the hw RNG
in the first place.

There are currently no intree users of get_random_bytes_arch().

Only get random bytes from the hw RNG, make function return the number
of bytes retrieved from the hw RNG.

Acked-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-07-17 21:32:48 -04:00
Jason A. Donenfeld 25e3fca492 random: always fill buffer in get_random_bytes_wait
In the unfortunate event that a developer fails to check the return
value of get_random_bytes_wait, or simply wants to make a "best effort"
attempt, for whatever that's worth, it's much better to still fill the
buffer with _something_ rather than catastrophically failing in the case
of an interruption. This is both a defense in depth measure against
inevitable programming bugs, as well as a means of making the API a bit
more useful.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-02-28 17:59:21 -05:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Linus Torvalds 52f6c588c7 Add wait_for_random_bytes() and get_random_*_wait() functions so that
callers can more safely get random bytes if they can block until the
 CRNG is initialized.
 
 Also print a warning if get_random_*() is called before the CRNG is
 initialized.  By default, only one single-line warning will be printed
 per boot.  If CONFIG_WARN_ALL_UNSEEDED_RANDOM is defined, then a
 warning will be printed for each function which tries to get random
 bytes before the CRNG is initialized.  This can get spammy for certain
 architecture types, so it is not enabled by default.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAllqXNUACgkQ8vlZVpUN
 gaPtAgf/aUbXZuWYsDQzslHsbzEWi+qz4QgL885/w4L00pEImTTp91Q06SDxWhtB
 KPvGnZHS3IofxBh2DC+6AwN6dPMoWDCfYhhO6po3FSz0DiPRIQCTuvOb8fhKY1X7
 rTdDq2xtDxPGxJ25bMJtlrgzH2XlXPpVyPUeoc9uh87zUK5aesXpUn9kBniRexoz
 ume+M/cDzPKkwNQpbLq8vzhNjoWMVv0FeW2akVvrjkkWko8nZLZ0R/kIyKQlRPdG
 LZDXcz0oTHpDS6+ufEo292ZuWm2IGer2YtwHsKyCAsyEWsUqBz2yurtkSj3mAVyC
 hHafyS+5WNaGdgBmg0zJxxwn5qxxLg==
 =ua7p
 -----END PGP SIGNATURE-----

Merge tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random

Pull random updates from Ted Ts'o:
 "Add wait_for_random_bytes() and get_random_*_wait() functions so that
  callers can more safely get random bytes if they can block until the
  CRNG is initialized.

  Also print a warning if get_random_*() is called before the CRNG is
  initialized. By default, only one single-line warning will be printed
  per boot. If CONFIG_WARN_ALL_UNSEEDED_RANDOM is defined, then a
  warning will be printed for each function which tries to get random
  bytes before the CRNG is initialized. This can get spammy for certain
  architecture types, so it is not enabled by default"

* tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
  random: reorder READ_ONCE() in get_random_uXX
  random: suppress spammy warnings about unseeded randomness
  random: warn when kernel uses unseeded randomness
  net/route: use get_random_int for random counter
  net/neighbor: use get_random_u32 for 32-bit hash random
  rhashtable: use get_random_u32 for hash_rnd
  ceph: ensure RNG is seeded before using
  iscsi: ensure RNG is seeded before use
  cifs: use get_random_u32 for 32-bit lock random
  random: add get_random_{bytes,u32,u64,int,long,once}_wait family
  random: add wait_for_random_bytes() API
2017-07-15 12:44:02 -07:00
Rik van Riel 022c204040 random,stackprotect: introduce get_random_canary function
Patch series "stackprotector: ascii armor the stack canary", v2.

Zero out the first byte of the stack canary value on 64 bit systems, in
order to mitigate unterminated C string overflows.

The null byte both prevents C string functions from reading the canary,
and from writing it if the canary value were guessed or obtained through
some other means.

Reducing the entropy by 8 bits is acceptable on 64-bit systems, which
will still have 56 bits of entropy left, but not on 32 bit systems, so
the "ascii armor" canary is only implemented on 64-bit systems.

Inspired by the "ascii armor" code in execshield and Daniel Micay's
linux-hardened tree.

Also see https://github.com/thestinger/linux-hardened/

This patch (of 5):

Introduce get_random_canary(), which provides a random unsigned long
canary value with the first byte zeroed out on 64 bit architectures, in
order to mitigate non-terminated C string overflows.

The null byte both prevents C string functions from reading the canary,
and from writing it if the canary value were guessed or obtained through
some other means.

Reducing the entropy by 8 bits is acceptable on 64-bit systems, which
will still have 56 bits of entropy left, but not on 32 bit systems, so
the "ascii armor" canary is only implemented on 64-bit systems.

Inspired by the "ascii armor" code in the old execshield patches, and
Daniel Micay's linux-hardened tree.

Link: http://lkml.kernel.org/r/20170524155751.424-2-riel@redhat.com
Signed-off-by: Rik van Riel <riel@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Daniel Micay <danielmicay@gmail.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:03 -07:00
Jason A. Donenfeld da9ba564bd random: add get_random_{bytes,u32,u64,int,long,once}_wait family
These functions are simple convenience wrappers that call
wait_for_random_bytes before calling the respective get_random_*
function.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-06-19 22:06:28 -04:00
Jason A. Donenfeld e297a783e4 random: add wait_for_random_bytes() API
This enables users of get_random_{bytes,u32,u64,int,long} to wait until
the pool is ready before using this function, in case they actually want
to have reliable randomness.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-06-19 22:06:28 -04:00
Jason A. Donenfeld c440408cf6 random: convert get_random_int/long into get_random_u32/u64
Many times, when a user wants a random number, he wants a random number
of a guaranteed size. So, thinking of get_random_int and get_random_long
in terms of get_random_u32 and get_random_u64 makes it much easier to
achieve this. It also makes the code simpler.

On 32-bit platforms, get_random_int and get_random_long are both aliased
to get_random_u32. On 64-bit platforms, int->u32 and long->u64.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-01-27 14:25:06 -05:00
Jason A. Donenfeld f5b98461cb random: use chacha20 for get_random_int/long
Now that our crng uses chacha20, we can rely on its speedy
characteristics for replacing MD5, while simultaneously achieving a
higher security guarantee. Before the idea was to use these functions if
you wanted random integers that aren't stupidly insecure but aren't
necessarily secure either, a vague gray zone, that hopefully was "good
enough" for its users. With chacha20, we can strengthen this claim,
since either we're using an rdrand-like instruction, or we're using the
same crng as /dev/urandom. And it's faster than what was before.

We could have chosen to replace this with a SipHash-derived function,
which might be slightly faster, but at the cost of having yet another
RNG construction in the kernel. By moving to chacha20, we have a single
RNG to analyze and verify, and we also already get good performance
improvements on all platforms.

Implementation-wise, rather than use a generic buffer for both
get_random_int/long and memcpy based on the size needs, we use a
specific buffer for 32-bit reads and for 64-bit reads. This way, we're
guaranteed to always have aligned accesses on all platforms. While
slightly more verbose in C, the assembly this generates is a lot
simpler than otherwise.

Finally, on 32-bit platforms where longs and ints are the same size,
we simply alias get_random_int to get_random_long.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Suggested-by: Theodore Ts'o <tytso@mit.edu>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-01-27 14:25:06 -05:00
Linus Torvalds 9ffc66941d This adds a new gcc plugin named "latent_entropy". It is designed to
extract as much possible uncertainty from a running system at boot time as
 possible, hoping to capitalize on any possible variation in CPU operation
 (due to runtime data differences, hardware differences, SMP ordering,
 thermal timing variation, cache behavior, etc).
 
 At the very least, this plugin is a much more comprehensive example for
 how to manipulate kernel code using the gcc plugin internals.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 Comment: Kees Cook <kees@outflux.net>
 
 iQIcBAABCgAGBQJX/BAFAAoJEIly9N/cbcAmzW8QALFbCs7EFFkML+M/M/9d8zEk
 1QbUs/z8covJTTT1PjSdw7JUrAMulI3S00owpcQVd/PcWjRPU80QwfsXBgIB0tvC
 Kub2qxn6Oaf+kTB646zwjFgjdCecw/USJP+90nfcu2+LCnE8ReclKd1aUee+Bnhm
 iDEUyH2ONIoWq6ta2Z9sA7+E4y2ZgOlmW0iga3Mnf+OcPtLE70fWPoe5E4g9DpYk
 B+kiPDrD9ql5zsHaEnKG1ldjiAZ1L6Grk8rGgLEXmbOWtTOFmnUhR+raK5NA/RCw
 MXNuyPay5aYPpqDHFm+OuaWQAiPWfPNWM3Ett4k0d9ZWLixTcD1z68AciExwk7aW
 SEA8b1Jwbg05ZNYM7NJB6t6suKC4dGPxWzKFOhmBicsh2Ni5f+Az0BQL6q8/V8/4
 8UEqDLuFlPJBB50A3z5ngCVeYJKZe8Bg/Swb4zXl6mIzZ9darLzXDEV6ystfPXxJ
 e1AdBb41WC+O2SAI4l64yyeswkGo3Iw2oMbXG5jmFl6wY/xGp7dWxw7gfnhC6oOh
 afOT54p2OUDfSAbJaO0IHliWoIdmE5ZYdVYVU9Ek+uWyaIwcXhNmqRg+Uqmo32jf
 cP5J9x2kF3RdOcbSHXmFp++fU+wkhBtEcjkNpvkjpi4xyA47IWS7lrVBBebrCq9R
 pa/A7CNQwibIV6YD8+/p
 =1dUK
 -----END PGP SIGNATURE-----

Merge tag 'gcc-plugins-v4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull gcc plugins update from Kees Cook:
 "This adds a new gcc plugin named "latent_entropy". It is designed to
  extract as much possible uncertainty from a running system at boot
  time as possible, hoping to capitalize on any possible variation in
  CPU operation (due to runtime data differences, hardware differences,
  SMP ordering, thermal timing variation, cache behavior, etc).

  At the very least, this plugin is a much more comprehensive example
  for how to manipulate kernel code using the gcc plugin internals"

* tag 'gcc-plugins-v4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  latent_entropy: Mark functions with __latent_entropy
  gcc-plugins: Add latent_entropy plugin
2016-10-15 10:03:15 -07:00
Jason Cooper 7425154d3b random: remove unused randomize_range()
All call sites for randomize_range have been updated to use the much
simpler and more robust randomize_addr().  Remove the now unnecessary
code.

Link: http://lkml.kernel.org/r/20160803233913.32511-8-jason@lakedaemon.net
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-11 15:06:32 -07:00
Jason Cooper 99fdafdeac random: simplify API for random address requests
To date, all callers of randomize_range() have set the length to 0, and
check for a zero return value.  For the current callers, the only way to
get zero returned is if end <= start.  Since they are all adding a
constant to the start address, this is unnecessary.

We can remove a bunch of needless checks by simplifying the API to do just
what everyone wants, return an address between [start, start + range).

While we're here, s/get_random_int/get_random_long/.  No current call site
is adversely affected by get_random_int(), since all current range
requests are < UINT_MAX.  However, we should match caller expectations to
avoid coming up short (ha!) in the future.

All current callers to randomize_range() chose to use the start address if
randomize_range() failed.  Therefore, we simplify things by just returning
the start address on error.

randomize_range() will be removed once all callers have been converted
over to randomize_addr().

Link: http://lkml.kernel.org/r/20160803233913.32511-2-jason@lakedaemon.net
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Roberts, William C" <william.c.roberts@intel.com>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Nick Kralevich <nnk@google.com>
Cc: Jeffrey Vander Stoep <jeffv@google.com>
Cc: Daniel Cashman <dcashman@android.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-11 15:06:32 -07:00
Emese Revfy 0766f788eb latent_entropy: Mark functions with __latent_entropy
The __latent_entropy gcc attribute can be used only on functions and
variables.  If it is on a function then the plugin will instrument it for
gathering control-flow entropy. If the attribute is on a variable then
the plugin will initialize it with random contents.  The variable must
be an integer, an integer array type or a structure with integer fields.

These specific functions have been selected because they are init
functions (to help gather boot-time entropy), are called at unpredictable
times, or they have variable loops, each of which provide some level of
latent entropy.

Signed-off-by: Emese Revfy <re.emese@gmail.com>
[kees: expanded commit message]
Signed-off-by: Kees Cook <keescook@chromium.org>
2016-10-10 14:51:45 -07:00
Emese Revfy 38addce8b6 gcc-plugins: Add latent_entropy plugin
This adds a new gcc plugin named "latent_entropy". It is designed to
extract as much possible uncertainty from a running system at boot time as
possible, hoping to capitalize on any possible variation in CPU operation
(due to runtime data differences, hardware differences, SMP ordering,
thermal timing variation, cache behavior, etc).

At the very least, this plugin is a much more comprehensive example for
how to manipulate kernel code using the gcc plugin internals.

The need for very-early boot entropy tends to be very architecture or
system design specific, so this plugin is more suited for those sorts
of special cases. The existing kernel RNG already attempts to extract
entropy from reliable runtime variation, but this plugin takes the idea to
a logical extreme by permuting a global variable based on any variation
in code execution (e.g. a different value (and permutation function)
is used to permute the global based on loop count, case statement,
if/then/else branching, etc).

To do this, the plugin starts by inserting a local variable in every
marked function. The plugin then adds logic so that the value of this
variable is modified by randomly chosen operations (add, xor and rol) and
random values (gcc generates separate static values for each location at
compile time and also injects the stack pointer at runtime). The resulting
value depends on the control flow path (e.g., loops and branches taken).

Before the function returns, the plugin mixes this local variable into
the latent_entropy global variable. The value of this global variable
is added to the kernel entropy pool in do_one_initcall() and _do_fork(),
though it does not credit any bytes of entropy to the pool; the contents
of the global are just used to mix the pool.

Additionally, the plugin can pre-initialize arrays with build-time
random contents, so that two different kernel builds running on identical
hardware will not have the same starting values.

Signed-off-by: Emese Revfy <re.emese@gmail.com>
[kees: expanded commit message and code comments]
Signed-off-by: Kees Cook <keescook@chromium.org>
2016-10-10 14:51:44 -07:00
H. Peter Anvin 117780eef7 x86, asm: use bool for bitops and other assembly outputs
The gcc people have confirmed that using "bool" when combined with
inline assembly always is treated as a byte-sized operand that can be
assumed to be 0 or 1, which is exactly what the SET instruction
emits.  Change the output types and intermediate variables of as many
operations as practical to "bool".

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Link: http://lkml.kernel.org/r/1465414726-197858-3-git-send-email-hpa@linux.intel.com
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2016-06-08 12:41:20 -07:00
Andy Shevchenko 8da4b8c48e lib/uuid.c: move generate_random_uuid() to uuid.c
Let's gather the UUID related functions under one hood.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20 17:58:30 -07:00
Daniel Cashman ec9ee4acd9 drivers: char: random: add get_random_long()
Commit d07e22597d ("mm: mmap: add new /proc tunable for mmap_base
ASLR") added the ability to choose from a range of values to use for
entropy count in generating the random offset to the mmap_base address.

The maximum value on this range was set to 32 bits for 64-bit x86
systems, but this value could be increased further, requiring more than
the 32 bits of randomness provided by get_random_int(), as is already
possible for arm64.  Add a new function: get_random_long() which more
naturally fits with the mmap usage of get_random_int() but operates
exactly the same as get_random_int().

Also, fix the shifting constant in mmap_rnd() to be an unsigned long so
that values greater than 31 bits generate an appropriate mask without
overflow.  This is especially important on x86, as its shift instruction
uses a 5-bit mask for the shift operand, which meant that any value for
mmap_rnd_bits over 31 acts as a no-op and effectively disables mmap_base
randomization.

Finally, replace calls to get_random_int() with get_random_long() where
appropriate.

This patch (of 2):

Add get_random_long().

Signed-off-by: Daniel Cashman <dcashman@android.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: David S. Miller <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Nick Kralevich <nnk@google.com>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Mark Salyzyn <salyzyn@android.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-27 10:28:52 -08:00
Daniel Borkmann 897ece56e7 random32: add prandom_init_once helper for own rngs
Add a prandom_init_once() facility that works on the rnd_state, so that
users that are keeping their own state independent from prandom_u32() can
initialize their taus113 per cpu states.

The motivation here is similar to net_get_random_once(): initialize the
state as late as possible in the hope that enough entropy has been
collected for the seeding. prandom_init_once() makes use of the recently
introduced prandom_seed_full_state() helper and is generic enough so that
it could also be used on fast-paths due to the DO_ONCE().

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08 05:26:38 -07:00
Herbert Xu c2719503f5 random: Remove kernel blocking API
This patch removes the kernel blocking API as it has been completely
replaced by the callback API.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-10 19:14:04 +08:00
Herbert Xu 205a525c33 random: Add callback API for random pool readiness
The get_blocking_random_bytes API is broken because the wait can
be arbitrarily long (potentially forever) so there is no safe way
of calling it from within the kernel.

This patch replaces it with a callback API instead.  The callback
is invoked potentially from interrupt context so the user needs
to schedule their own work thread if necessary.

In addition to adding callbacks, they can also be removed as
otherwise this opens up a way for user-space to allocate kernel
memory with no bound (by opening algif_rng descriptors and then
closing them).

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-10 19:13:56 +08:00
Stephan Mueller 16b369a91d random: Blocking API for accessing nonblocking_pool
The added API calls provide a synchronous function call
get_blocking_random_bytes where the caller is blocked until
the nonblocking_pool is initialized.

CC: Andreas Steffen <andreas.steffen@strongswan.org>
CC: Theodore Ts'o <tytso@mit.edu>
CC: Sandy Harris <sandyinchina@gmail.com>
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-27 17:51:53 +08:00
Daniel Borkmann a98406e22c random32: improvements to prandom_bytes
This patch addresses a couple of minor items, mostly addesssing
prandom_bytes(): 1) prandom_bytes{,_state}() should use size_t
for length arguments, 2) We can use put_unaligned() when filling
the array instead of open coding it [ perhaps some archs will
further benefit from their own arch specific implementation when
GCC cannot make up for it ], 3) Fix a typo, 4) Better use unsigned
int as type for getting the arch seed, 5) Make use of
prandom_u32_max() for timer slack.

Regarding the change to put_unaligned(), callers of prandom_bytes()
which internally invoke prandom_bytes_state(), don't bother as
they expect the array to be filled randomly and don't have any
control of the internal state what-so-ever (that's also why we
have periodic reseeding there, etc), so they really don't care.

Now for the direct callers of prandom_bytes_state(), which
are solely located in test cases for MTD devices, that is,
drivers/mtd/tests/{oobtest.c,pagetest.c,subpagetest.c}:

These tests basically fill a test write-vector through
prandom_bytes_state() with an a-priori defined seed each time
and write that to a MTD device. Later on, they set up a read-vector
and read back that blocks from the device. So in the verification
phase, the write-vector is being re-setup [ so same seed and
prandom_bytes_state() called ], and then memcmp()'ed against the
read-vector to check if the data is the same.

Akinobu, Lothar and I also tested this patch and it runs through
the 3 relevant MTD test cases w/o any errors on the nandsim device
(simulator for MTD devs) for x86_64, ppc64, ARM (i.MX28, i.MX53
and i.MX6):

  # modprobe nandsim first_id_byte=0x20 second_id_byte=0xac \
                     third_id_byte=0x00 fourth_id_byte=0x15
  # modprobe mtd_oobtest dev=0
  # modprobe mtd_pagetest dev=0
  # modprobe mtd_subpagetest dev=0

We also don't have any users depending directly on a particular
result of the PRNG (except the PRNG self-test itself), and that's
just fine as it e.g. allowed us easily to do things like upgrading
from taus88 to taus113.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Tested-by: Akinobu Mita <akinobu.mita@gmail.com>
Tested-by: Lothar Waßmann <LW@KARO-electronics.de>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-24 18:36:01 -07:00
H. Peter Anvin 7b878d4b48 random: Add arch_has_random[_seed]()
Add predicate functions for having arch_get_random[_seed]*().  The
only current use is to avoid the loop in arch_random_refill() when
arch_get_random_seed_long() is unavailable.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-03-19 22:24:08 -04:00
H. Peter Anvin d20f78d252 x86, random: Enable the RDSEED instruction
Upcoming Intel silicon adds a new RDSEED instruction, which is similar
to RDRAND but provides a stronger guarantee: unlike RDRAND, RDSEED
will always reseed the PRNG from the true random number source between
each read.  Thus, the output of RDSEED is guaranteed to be 100%
entropic, unlike RDRAND which is only architecturally guaranteed to be
1/512 entropic (although in practice is much more.)

The RDSEED instruction takes the same time to execute as RDRAND, but
RDSEED unlike RDRAND can legitimately return failure (CF=0) due to
entropy exhaustion if too many threads on too many cores are hammering
the RDSEED instruction at the same time.  Therefore, we have to be
more conservative and only use it in places where we can tolerate
failures.

This patch introduces the primitives arch_get_random_seed_{int,long}()
but does not use it yet.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-03-19 22:22:06 -04:00
Daniel Borkmann f337db64af random32: add prandom_u32_max and convert open coded users
Many functions have open coded a function that returns a random
number in range [0,N-1]. Under the assumption that we have a PRNG
such as taus113 with being well distributed in [0, ~0U] space,
we can implement such a function as uword t = (n*m')>>32, where
m' is a random number obtained from PRNG, n the right open interval
border and t our resulting random number, with n,m',t in u32 universe.

Lets go with Joe and simply call it prandom_u32_max(), although
technically we have an right open interval endpoint, but that we
have documented. Other users can further be migrated to the new
prandom_u32_max() function later on; for now, we need to make sure
to migrate reciprocal_divide() users for the reciprocal_divide()
follow-up fixup since their function signatures are going to change.

Joint work with Hannes Frederic Sowa.

Cc: Jakub Zawadzki <darkjames-ws@darkjames.pl>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-21 23:17:20 -08:00
Daniel Borkmann a98814cef8 random32: upgrade taus88 generator to taus113 from errata paper
Since we use prandom*() functions quite often in networking code
i.e. in UDP port selection, netfilter code, etc, upgrade the PRNG
from Pierre L'Ecuyer's original paper "Maximally Equidistributed
Combined Tausworthe Generators", Mathematics of Computation, 65,
213 (1996), 203--213 to the version published in his errata paper [1].

The Tausworthe generator is a maximally-equidistributed generator,
that is fast and has good statistical properties [1].

The version presented there upgrades the 3 state LFSR to a 4 state
LFSR with increased periodicity from about 2^88 to 2^113. The
algorithm is presented in [1] by the very same author who also
designed the original algorithm in [2].

Also, by increasing the state, we make it a bit harder for attackers
to "guess" the PRNGs internal state. See also discussion in [3].

Now, as we use this sort of weak initialization discussed in [3]
only between core_initcall() until late_initcall() time [*] for
prandom32*() users, namely in prandom_init(), it is less relevant
from late_initcall() onwards as we overwrite seeds through
prandom_reseed() anyways with a seed source of higher entropy, that
is, get_random_bytes(). In other words, a exhaustive keysearch of
96 bit would be needed. Now, with the help of this patch, this
state-search increases further to 128 bit. Initialization needs
to make sure that s1 > 1, s2 > 7, s3 > 15, s4 > 127.

taus88 and taus113 algorithm is also part of GSL. I added a test
case in the next patch to verify internal behaviour of this patch
with GSL and ran tests with the dieharder 3.31.1 RNG test suite:

$ dieharder -g 052 -a -m 10 -s 1 -S 4137730333 #taus88
$ dieharder -g 054 -a -m 10 -s 1 -S 4137730333 #taus113

With this seed configuration, in order to compare both, we get
the following differences:

algorithm                 taus88           taus113
rands/second [**]         1.61e+08         1.37e+08
sts_serial(4, 1st run)    WEAK             PASSED
sts_serial(9, 2nd run)    WEAK             PASSED
rgb_lagged_sum(31)        WEAK             PASSED

We took out diehard_sums test as according to the authors it is
considered broken and unusable [4]. Despite that and the slight
decrease in performance (which is acceptable), taus113 here passes
all 113 tests (only rgb_minimum_distance_5 in WEAK, the rest PASSED).
In general, taus/taus113 is considered "very good" by the authors
of dieharder [5].

The papers [1][2] states a single warm-up step is sufficient by
running quicktaus once on each state to ensure proper initialization
of ~s_{0}:

Our selection of (s) according to Table 1 of [1] row 1 holds the
condition L - k <= r - s, that is,

  (32 32 32 32) - (31 29 28 25) <= (25 27 15 22) - (18 2 7 13)

with r = k - q and q = (6 2 13 3) as also stated by the paper.
So according to [2] we are safe with one round of quicktaus for
initialization. However we decided to include the warm-up phase
of the PRNG as done in GSL in every case as a safety net. We also
use the warm up phase to make the output of the RNG easier to
verify by the GSL output.

In prandom_init(), we also mix random_get_entropy() into it, just
like drivers/char/random.c does it, jiffies ^ random_get_entropy().
random-get_entropy() is get_cycles(). xor is entropy preserving so
it is fine if it is not implemented by some architectures.

Note, this PRNG is *not* used for cryptography in the kernel, but
rather as a fast PRNG for various randomizations i.e. in the
networking code, or elsewhere for debugging purposes, for example.

[*]: In order to generate some "sort of pseduo-randomness", since
get_random_bytes() is not yet available for us, we use jiffies and
initialize states s1 - s3 with a simple linear congruential generator
(LCG), that is x <- x * 69069; and derive s2, s3, from the 32bit
initialization from s1. So the above quote from [3] accounts only
for the time from core to late initcall, not afterwards.
[**] Single threaded run on MacBook Air w/ Intel Core i5-3317U

 [1] http://www.iro.umontreal.ca/~lecuyer/myftp/papers/tausme2.ps
 [2] http://www.iro.umontreal.ca/~lecuyer/myftp/papers/tausme.ps
 [3] http://thread.gmane.org/gmane.comp.encryption.general/12103/
 [4] http://code.google.com/p/dieharder/source/browse/trunk/libdieharder/diehard_sums.c?spec=svn490&r=490#20
 [5] http://www.phy.duke.edu/~rgb/General/dieharder.php

Joint work with Hannes Frederic Sowa.

Cc: Florian Weimer <fweimer@redhat.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-11 14:32:15 -05:00