When driver is probed, we iterate over NHLT and check if clk entries are
present. For each such entry we call register_skl_clk and keep the
result in data->clk[].
Currently data->clk is sparsely indexed using NHLT table iterator, while
when freeing we use number of registered entries. Let's just use
data->avail_clk_cnt as index, so it can be reset back in
unregister_src_clk.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
When we remove component we need to reverse things which were done on
init, this consists of topology cleanup, lists cleanup and releasing
firmware.
Currently cleanup handlers are put in wrong places or otherwise missing.
So add proper component cleanup function and perform cleanups in it.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently debugfs has no cleanup function. Add skl_debufs_exit function
so we can clean after ourselves properly.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
When we unload and reload machine driver, we shouldn't return that we
failed to initialize. This allows to reload machine driver, without
having to unload whole stack.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Change kzalloc to devm_kzalloc, so compr gets automatically freed when
it's no longer needed.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently on each driver reload internal counter is being increased. It
causes failure to enumerate driver devices, as they have hardcoded:
.codec_name = "ehdaudio0D2",
As there is currently no devices with multiple hda codecs and there is
currently no established way to reliably differentiate, between them,
always assign bus->idx = 0;
This fixes a problem when we unload and reload machine driver idx gets
incremented, so .codec_name would've needed to be set to "ehdaudio1D2"
after first reload and so on.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
If skl_probe_work() was not run driver ends up dereferencing NULL
pointer when operating on lists in skl_platform_unregister().
To fix this initialize lists in skl_create(). Also run
cancel_work_sync() before all cleanup functions, so we don't end up
unnecessarily running probe work.
Easily reproducible with:
while true; do modprobe snd_soc_skl; rmmod snd_soc_skl; done
(with the assumption that relevant drivers are added to blacklist on
system boot)
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
For BXT platforms, the recommended sequence to program the SDxFMT is to
first couple the stream, write the format and decouple again.
For all other platforms said sequence remains unchanged.
To prevent code duplication, IS_BXT (and consequently IS_CFL) macro is
relocated to hda_codec.h file so it can be accessed by SKL driver.
Signed-off-by: Paweł Harłoziński <pawel.harlozinski@intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds 4 SND_PCI_QUIRK(...) lines for several barebone models of the ODM
Clevo. The model names are written in regex syntax to describe/match all clevo
models that are similar enough and use the same PCI SSID that this fixup works
for them.
Additionally the lines regarding SSID 0x96e1 and 0x97e1 didn't fix audio for the
all our Clevo notebooks using these SSIDs (models Clevo P960* and P970*) since
ALC1220_FIXP_CLEVO_PB51ED_PINS swapped pins that are not necesarry to be
swapped. This patch initiates ALC1220_FIXUP_CLEVO_P950 instead for these model
and fixes the audio.
Fixes: 80690a276f ("ALSA: hda/realtek - Add quirk for Tuxedo XC 1509")
Signed-off-by: Richard Sailer <rs@tuxedocomputers.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Upon enabling the ASRC DAC we need a delay to avoid popping the
speakers.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Cc: Ross Zwisler <zwisler@chromium.org>
Tested-by: Ross Zwisler <zwisler@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
According to the datasheet the max98357a also supports 32, 44.1 and
88.2 kHz sample rate. This support was also introduced recently by
commit fdf34366d3 ("ASoC: max98357a: add missing supported rates").
Actually the machine driver validates the supported sample rates but
this is not really needed because the component driver can all apply
whatever constraints are needed and do their own validation. So, remove
the checks from the machine driver as are not needed at all. This way,
we also support 32, 44.1 and 88.2 kHz sample rates and we get rid of the
errors like the below.
rk3399-gru-sound sound: rockchip_sound_max98357a_hw_params() doesn't support this sample rate: 44100
rk3399-gru-sound sound: ASoC: machine hw_params failed: -22
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_find_dai() finds component first via specified
snd_soc_dai_link_component, and find DAI from it.
We already have soc_find_component() to find component,
but soc_find_dai() has original implementation to find component.
We shouldn't have duplicate implementation to do same things.
This patch uses soc_find_component() at soc_find_dai()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_find_component() is using "of_node" and "name" to finding component,
but we should use snd_soc_dai_link_component now, because it is created
to such purpose.
This patch uses snd_soc_dai_link_component for soc_find_component().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC already has snd_soc_is_matching_component() to confirming
matching component, but, soc_find_component() has original
implementation to confirm component.
We shouldn't have duplicate implementation to do same things.
This patch uses snd_soc_is_matching_component() at soc_find_component()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
move soc_find_component() next to snd_soc_is_matching_component().
This is prepare for soc_find_component() cleanup
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Back in ff9fb72bc0 (debugfs: return error values, not NULL) the
debugfs APIs were changed to return error pointers rather than NULL
pointers on error, breaking the error checking in ASoC. Update the
code to use IS_ERR() and log the codes that are returned as part of
the error messages.
Fixes: ff9fb72bc0 (debugfs: return error values, not NULL)
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Back in ff9fb72bc0 (debugfs: return error values, not NULL) the
debugfs APIs were changed to return error pointers rather than NULL
pointers on error, breaking the error checking in ASoC. Update the
code to use IS_ERR() and log the codes that are returned as part of
the error messages.
Fixes: ff9fb72bc0 (debugfs: return error values, not NULL)
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
commit 34ac3c3eb8 ("ASoC: core: lock client_mutex while removing
link components") added mutex_lock() at soc_remove_link_components().
Is is called from snd_soc_unbind_card()
snd_soc_unbind_card()
=> soc_remove_link_components()
soc_cleanup_card_resources()
soc_remove_dai_links()
=> soc_remove_link_components()
And, there are 2 way to call it.
(1)
snd_soc_unregister_component()
** mutex_lock()
snd_soc_component_del_unlocked()
=> snd_soc_unbind_card()
** mutex_unlock()
(2)
snd_soc_unregister_card()
=> snd_soc_unbind_card()
(1) case is already using mutex_lock() when it calles
snd_soc_unbind_card(), thus, we will get lockdep warning.
commit 495f926c68 ("ASoC: core: Fix deadlock in
snd_soc_instantiate_card()") tried to fixup it, but still not
enough. We still have lockdep warning when we try unbind/bind.
We need mutex_lock() under snd_soc_unregister_card()
instead of snd_remove_link_components()/snd_soc_unbind_card().
Fixes: 34ac3c3eb8 ("ASoC: core: lock client_mutex while removing link components")
Fixes: 495f926c68 ("ASoC: core: Fix deadlock in snd_soc_instantiate_card()")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The recent USB core code performs sanity checks for the given pipe and
EP types, and it can be hit by manipulated USB descriptors by syzbot.
For making syzbot happier, this patch introduces a local helper for a
sanity check in the driver side and calls it at each place before the
message handling, so that we can avoid the WARNING splats.
Reported-by: syzbot+d952e5e28f5fb7718d23@syzkaller.appspotmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In ALSA firewire-motu driver, some tracepoints are supported to probe
vendor-specific data fields for SPH and status/control messages in
payload of isochronous packet. At present, the events of tracepoints
are unique each of direction, however the pair of events has the
same structure and print format. It's possible to unify the pair.
This commit unifies the pair. From userspace, direction is specified
by filtering for src/dst fields in the structure.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This reverts commit e703965a12.
When creating this patch, I compared the value of src field to the
value of first byte of cip_header field (SID) in tracing event.
But in this test I used a device which has a quirk to transfer
isochronous packet with invalid SID. The original change is valid.
Fixes: e703965a12 ("ALSA: firewire-lib: fix inverted node IDs for amdtp_packet events")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is an arbitrary difference between the prototypes of
bus_find_device() and class_find_device() preventing their callers
from passing the same pair of data and match() arguments to both of
them, which is the const qualifier used in the prototype of
class_find_device(). If that qualifier is also used in the
bus_find_device() prototype, it will be possible to pass the same
match() callback function to both bus_find_device() and
class_find_device(), which will allow some optimizations to be made in
order to avoid code duplication going forward. Also with that, constify
the "data" parameter as it is passed as a const to the match function.
For this reason, change the prototype of bus_find_device() to match
the prototype of class_find_device() and adjust its callers to use the
const qualifier in accordance with the new prototype of it.
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Andreas Noever <andreas.noever@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Corey Minyard <minyard@acm.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Kershner <david.kershner@unisys.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Harald Freudenberger <freude@linux.ibm.com>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michael Jamet <michael.jamet@intel.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Sebastian Ott <sebott@linux.ibm.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Yehezkel Bernat <YehezkelShB@gmail.com>
Cc: rafael@kernel.org
Acked-by: Corey Minyard <minyard@acm.org>
Acked-by: David Kershner <david.kershner@unisys.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Wolfram Sang <wsa@the-dreams.de> # for the I2C parts
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When stopping packet streaming in reserve function for duplex streams,
isochronous resources should be released.
Fixes: 7bc93821a7 ("ALSA: firewire-lib: split allocation of isochronous resources from establishment of connection")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When stopping packet streaming in reserve function for duplex streams,
isochronous resources should be released.
Fixes: 7bc93821a7 ("ALSA: firewire-lib: split allocation of isochronous resources from establishment of connection")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When stopping packet streaming in reserve function for duplex streams,
isochronous resources should be released.
Fixes: 7bc93821a7 ("ALSA: firewire-lib: split allocation of isochronous resources from establishment of connection")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
>From callbacks for pcm and rawmidi interfaces, the functions to stop
and release duplex streams are called at the same time. This commit
merges the two functions.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
>From callbacks for pcm and rawmidi interfaces, the functions to stop
and release duplex streams are called at the same time. This commit
merges the two functions.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
>From callbacks for pcm and rawmidi interfaces, the functions to stop
and release duplex streams are called at the same time. This commit
merges the two functions.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
>From callbacks for pcm and rawmidi interfaces, the functions to stop
and release duplex streams are called at the same time. This commit
merges the two functions.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
>From callbacks for pcm and rawmidi interfaces, the functions to stop
and release duplex streams are called at the same time. This commit
merges the two functions.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
rt5514-spi can use dev_get_drvdata() to get its component
because it is using snd_soc_component_set_drvdata();
static int rt5514_spi_pcm_probe(...)
{
...
=> snd_soc_component_set_drvdata(component, ...);
...
}
We don't need to use snd_soc_lookup_component() for it.
This patch uses dev_get_drvdata() instead of snd_soc_lookup_component().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver was wired to be only usable in DIN1/DOUT1 mode, switching
between TDM and non TDM modes based on the number of channels.
While keeping this functionality for compatibility add support for using
all DIN1/2/3/4 and DOUT1/2/3 if it is needed by setting the TDM slots to
2.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
If multiple serializers are connected in the system and the number of
channels will need to use more than one serializer the mask to enable the
serializers were left to 0 if tdm_mask is provided
Fixes: dd55ff8346 ("ASoC: davinci-mcasp: Add set_tdm_slots() support")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Unused serializers needs to be configured as INACTIVE, otherwise they will
underflow/overflow when multiple serializers are connected, but some are
not needed for the given stream.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch the driver to use modern UUID API, i.e. guid_t type and
accompanying functions, such as guid_equal().
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Adds the codec driver for the CS47L90 SmartCodec. This is a
multi-functional codec based on the Cirrus Logic Madera platform.
Signed-off-by: Nikesh Oswal <nikesh@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Adds the codec driver for the CS47L85 SmartCodec. This is a
multi-functional codec based on the Cirrus Logic Madera platform.
Signed-off-by: Nariman Poushin <npoushin@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Adds the codec driver for the CS47L35 SmartCodec. This is a
multi-functional codec based on the Cirrus Logic Madera platform.
Signed-off-by: Piotr Stankiewicz <piotrs@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The Cirrus Logic Madera codecs are a family of related codecs with
extensive digital and analogue I/O, digital mixing and routing,
signal processing and programmable DSPs. This patch adds common
support code shared by all Madera codecs.
This patch also adds the pdata to the parent mfd pdata struct.
Since there is a circular build dependency it's convenient to
patch them both atomically.
Signed-off-by: Nariman Poushin <nariman@opensource.cirrus.com>
Signed-off-by: Nikesh Oswal <Nikesh.Oswal@cirrus.com>
Signed-off-by: Piotr Stankiewicz <piotrs@opensource.cirrus.com>
Signed-off-by: Ajit Pandey <ajit.pandey@incubesol.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support of audio 16 bits format record to STM32
DFSDM driver.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
licensed under gpl v2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 1 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.395945938@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 13 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081205.608593891@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of version 2 of the gnu general public license as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not see http www gnu org
licenses the full gnu general public license is included in this
distribution in the file called copying
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081202.258730266@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
driver is free software you can redistribute it and or modify it
under the terms of the gnu general public license as published by
the free software foundation version 2 the [audiowerk2] [alsa]
driver is distributed in the hope that it will be useful but without
any warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with the [audiowerk2] [alsa] driver if not
write to the free software foundation inc 51 franklin street fifth
floor boston ma 02110 1301 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 5 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081201.505559553@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
gpl v2 can be found in copying
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 20 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204655.283615864@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation you should have received a
copy of the gnu general public license along with this program if
not write to the free software foundation inc 675 mass ave cambridge
ma 02139 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 1 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204654.276825629@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not see http www gnu org
licenses
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 503 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ALSA SoC used 2 type of Platform if sound card doesn't need
Platform.
1) use Dummy Platform as Platform component
2) use CPU component as Platform component
Now, ALSA SoC allows "no Platform" settings, and it will behave
same as 2) case selection. And, all sound card which doesn't need
specific Platform are now not selecting Platform any more.
This means, no sound card is using dummy Platform on ALSA SoC any
more. This patch removes unused dummy Platform.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
dai_link is used to selecting Component (= CPU/Codec/Platform) and
DAI (= CPU/Codec). And selected CPU/Codec/Platform components are
*listed* on Card.
Many drivers don't need special Platform component, but was
mandatory at legacy style ALSA SoC.
Thus, there is this kind of settings on many drivers.
dai_link->platform_of_node = dai_link->cpu_of_node;
In this case, soc_bind_dai_link() will pick-up "CPU component" as
"Platform component", and try to add it to snd_soc_pcm_runtime.
But it will be ignored, because it is already added when CPU bindings.
Historically, this kind of "CPU component" is used/selected as
"Platform" on many ALSA SoC drivers.
OTOH, Dummy Platform will be selected automatically by ALSA SoC if
driver doesn't have Platform settings.
These indicates that there are 2 type of Platforms exist at current
ALSA SoC if driver doesn't need special Platform.
1) use Dummy Platform as Platform component
2) use CPU component as Platform component
ALSA SoC will call Dummy Platform callback function if it is using
Dummy Platform, but it is completely pointless. Because it is the
sound card which doesn't need special Platform.
Thus, the behavior we request to ALSA SoC is selecting 2) automatically
instead of 1) if sound card doesn't need special Platform.
And, 2) means "do nothing" as above explain.
These were needed at legacy style dai_link, but is no longer needed
at modern style dai_link anymore.
This patch allows "no Platform" settings on dai_link, and will do
nothing for it if there was no platform settings. This is same as 2).
By this patch, all drivers which is selecting "CPU component" as
"Platform" can remove such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt5677 driver writes to the IRQ control register within the IRQ
handler in order to flip the polarity of the interrupts that have been
signalled. If an interrupt fires in the interval between the
regmap_read and the regmap_write, it will not trigger a new call to
rt5677_irq.
Add a bounded loop to rt5677_irq that keeps checking interrupts until
none are seen, so that any interrupts that are signalled in that
interval are correctly handled.
Signed-off-by: Ben Zhang <benzh@chromium.org>
Signed-off-by: Fletcher Woodruff <fletcherw@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt5677 jack detection function has a requirement that the polarity
of an interrupt be flipped after it fires in order to clear the
interrupt.
This patch implements an irq_chip with irq_domain directly instead of
using regmap-irq, so that interrupt source line polarities can be
flipped in the irq handler.
The reason that this patch does not add this feature within regmap-irq
is that future patches will add hotword detection support to this irq
handler. Those patches will require adding additional logic that would
not make sense to have in regmap-irq.
Signed-off-by: Ben Zhang <benzh@chromium.org>
Signed-off-by: Fletcher Woodruff <fletcherw@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
A snd_soc_dai_link_component is allocated and associated with the first
link, so when the code tries to assign the of_node of the second link's
"cpu" member it dereferences a NULL pointer.
Fix this by moving the allocation and assignement of
snd_soc_dai_link_components into the loop, giving us one pair per link.
Fixes: 1e36ea360a ("ASoC: qcom: common: use modern dai_link style")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the link name to be "dmic16k", the cpu_dai_name to be "DMIC16k
Pin", to be aligned with other machine drivers.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Bard liao <yung-chuan.liao@linux.intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The sof-rt5682 machine driver currently uses BCLK on BYT/Minnowboard
platform. The MCLK signal is available since the Turbot revision, so
enable MCLK on BYT/Minnowboard Turbot platform.
Signed-off-by: Xun Zhang <xun2.zhang@intel.com>
Signed-off-by: Bard liao <yung-chuan.liao@linux.intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
commit c16015f36c ("ASoC: rsnd: add .get_id/.get_id_sub")
introduces rsnd_ctu_id which calcualates and gives
the main Device id of the CTU by dividing the id by 4.
rsnd_mod_id uses this interface to get the CTU main
Device id. But this commit forgets to revert the main
Device id calcution previously done in rsnd_ctu_probe_
which also divides the id by 4. This path corrects the
same to get the correct main Device id.
The issue is observered when rsnd_ctu_probe_ is done for CTU1
Fixes: c16015f36c ("ASoC: rsnd: add .get_id/.get_id_sub")
Signed-off-by: Nilkanth Ahirrao <anilkanth@jp.adit-jv.com>
Signed-off-by: Suresh Udipi <sudipi@jp.adit-jv.com>
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the memory allocation flag from GFP_ATOMIC to GFP_KERNEL because
probe of platform device is unlikely a place where cannot sleep.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The interface used to communicate with the DSP can sleep, so mark the
links as nonatomic. This prevents various sleep while atomic errors when
bringing up the audio interface.
Suggested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
HW recommends to set DUM bit on device power up, so that DPIB write
request occurs every frame regardless of whether DPIB has changed or
not. This addresses incorrect position reporting for capture streams.
Signed-off-by: Leoni Prodduvaka <leoni.prodduvaka@intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The pairs of pcm.hw_params callbacks and .hw_free callbacks for both
direction have no differences.
This commit unifies the pairs.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
After bus reset, isochronous resource manager releases all of allocated
isochronous resources. The nodes to transfer isochronous packet should
request reallocation of the resources.
However, between the bus-reset and invocation of 'struct fw_driver.update'
handler, ALSA PCM application can detect this situation by XRUN because
the target device cancelled to transmit packets once bus-reset occurs.
Due to the above mechanism, ALSA fireface driver just stops packet
streaming in the update handler, thus pcm.prepare handler should
request the reallocation.
This commit requests the reallocation in pcm.prepare callback when
bus generation is changed.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Once allocated, isochronous resources are available for packet
streaming, even if the streaming is cancelled. For this reason,
current implementation handles allocation of the resources and
starting packet streaming at the same time. However, this brings
complicated procedure to start packet streaming.
This commit separates the allocation and starting. The allocation is
done in pcm.hw_params callback and available till pcm.hw_free callback.
Even if any XRUN occurs, pcm.prepare callback is done to restart
packet streaming without releasing/allocating the resources.
There are two points to stop packet streaming; in pcm.hw_params and
pcm.prepare callbacks. The former point is a case that packet streaming
is already started for any MIDI substream then packet streaming is
requested with different sampling transfer frequency for any PCM
substream. The latter point is cases of any XRUN or packet queueing
error.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The operation to finish packet streaming includes stopping isochronous
contexts. This commit merges it to the helper function.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The helper function to stop isochronous context is superfluous. This
commit removes it with simpler codes.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Like the other drivers in ALSA firewire stack, this commit renames
functions to begin/finish packet streaming.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In snd_motu_stream_start_duplex() function, there're two points to stop
packet streaming, however they can be merged. This commit merges them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a part of preparation to perform allocation/release
of isochronous resources in pcm.hw_params/hw_free callbacks.
This commit adds a helper function to allocate isochronous resources.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Two sets of callbacks for rawmidi.open/close but they have the same
codes. This commit unifies each of the callbacks.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Two counters are used to maintain isochronous packet streaming for both
directions. However, like the other drivers, they can be replaced with
one counter. This commit unifies them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
"git diff" says:
\ No newline at end of file
after modifying the files.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
McBSP used to work correctly as long as compat DMA probing, removed by
commit 642aafea88 ("ASoC: ti: remove compat dma probing"), was
available. New method of DMA probing apparently requires users to
provide channel names when registering with SDMA, while McBSP passes
NULLs. Fix it.
The same probably applies to McASP (not tested), hence the patch fixes
both.
Fixes: 642aafea88 ("ASoC: ti: remove compat dma probing")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch moves the code to select the gpios for jack detection
from rt5677_probe to rt5677_init_irq (called from rt5677_i2c_probe).
It also sets some registers to fix bugs related to jack detection, and
adds some constants and comments to make it easier to understand what
certain register settings are controlling.
Signed-off-by: Ben Zhang <benzh@chromium.org>
Signed-off-by: Fletcher Woodruff <fletcherw@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt5677 driver uses ACPI-style property names to read from the
device API. However, these do not match the property names in _DSD
used on the Chromebook Pixel 2015, which are closer to the Device Tree
style. Unify the two functions for reading from the device API so that
they try ACPI-style names first and fall back to the DT names on error.
With this patch, plugging and unplugging the headphone jack switches
between headphones and speakers automatically.
Signed-off-by: Fletcher Woodruff <fletcherw@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Compile-testing without PCI just causes warnings:
sound/soc/sof/sof-pci-dev.c:330:13: error: 'sof_pci_remove' defined but not used [-Werror=unused-function]
static void sof_pci_remove(struct pci_dev *pci)
^~~~~~~~~~~~~~
sound/soc/sof/sof-pci-dev.c:230:12: error: 'sof_pci_probe' defined but not used [-Werror=unused-function]
static int sof_pci_probe(struct pci_dev *pci,
^~~~~~~~~~~~~
I tried to fix this in a way that would still allow compile
tests, but it got too ugly, so this just reverts the patch
that allowed it in the first place.
Most architectures do allow enabling PCI, so the value of the
COMPILE_TEST alternative was not very high to start with.
Fixes: e13ef82a9a ("ASoC: SOF: add COMPILE_TEST for PCI options")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Before clearing stream statuses, ensure RUN bit update has taken
effect by reading the value back.
Signed-off-by: Zhu Yingjiang <yingjiang.zhu@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
As per the HW recommendation, after setting the RUN bit
(start as 1, stop as 0), software must read the bit back
to make sure the bit is set right, before modifying related
control registers/re-starting the DMA engine.
Signed-off-by: Zhu Yingjiang <yingjiang.zhu@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Stream status and WAKESTS registers need to be cleared by writing
to them with snd_sof_dsp_write(). snd_sof_dsp_update_bits() only
writes if the value is changed and will result in not clearing
the status.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Unify suspend code by using SOF common function
hda_dsp_ctrl_stop_chip() which can handle both HDA
and non-HDA cases.
Signed-off-by: Zhu Yingjiang <yingjiang.zhu@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add common hda_dsp_ctrl_stop_chip() function to stop controller with
the same function handling both HDA and non-HDA cases. This function
disables IRQs and clears status masks. When CONFIG_SND_SOC_SOF_HDA
is defined, also disables the CORB/RIRB, and stops i/o.
Signed-off-by: Zhu Yingjiang <yingjiang.zhu@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Unify ppcap function setup by using SOF common functions
for both HDA and non-HDA cases.
Signed-off-by: Zhu Yingjiang <yingjiang.zhu@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
We should use irq disabled mode when read/write hda registers from
thread context, as we need to hold the same bus->reg_lock in interrupt
context hda_dsp_stream_interrupt(), otherwise, when we are holding the
lock in hda_dsp_stream_hw_free() and the interrupt arrives, we will get
deadlock in the interrupt handler.
Error logs like this:
[ 5.603606] CPU0
[ 5.603606] ----
[ 5.603607] lock(&(&bus->reg_lock)->rlock);
[ 5.603608] <Interrupt>
[ 5.603609] lock(&(&bus->reg_lock)->rlock);
[ 5.603610]
*** DEADLOCK ***
[ 5.603611] 2 locks held by pulseaudio/2329:
[ 5.603612] #0: 000000005fcf26c6 (&card->mutex/1){+.+.}, at: dpcm_fe_dai_hw_free+0x2b/0x110 [snd_soc_core]
[ 5.603619] #1: 00000000ef369faf (&rtd->pcm_mutex){+.+.}, at: soc_pcm_hw_free+0x2e/0x1c0 [snd_soc_core]
The fix is simple, let's switch to use spin_lock/unlock_irq().
Reported-by: Xun Zhang <xun2.zhang@intel.com>
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Modify the stream interrupt handler to always wake up the
IRQ thread if the status register is valid. The IRQ thread
performs the check for stream interrupts and RIRB interrupts
in a loop to handle the case of missed interrupts when an
unsolicited response from the codec is received just before the
stream interrupt handler is completed.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Host and link DMA are decoupled during FE hw_params. So,
they must be coupled in hw_free if the link DMA channel
is idle.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Paused streams do not get suspended when the system enters S3.
So, clear and release link DMA channel for such streams in the
hda_dsp_set_hw_params_upon_resume() callback. Also, invalidate
the link DMA channel in the DAI config before restoring the
dai config upon resume. Also, modify the signature for the
set_hw_params_upon_resume() op to return an int.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Due to the HW programming sequence requirement that the host
and link DMA channels need to be coupled/decoupled during pcm
hw_params, the host DMA channel corresponding to the link
DMA channel in use for hostless streams needs to be reserved.
This is achieved by adding a host_reserved flag in the
sof_intel_hda_stream structure which is checked when assigning
a host DMA channel.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The recommended HDA HW programming sequence for setting
the DMA format requires that the link DMA and host DMA
channels be coupled before setting the format. This
change means that host DMA or link DMA channels be
reserved even if only one is used.
Statically assigned link DMA channels would mean that
all the corresponding host DMA channels will need to be
reserved, leaving only a few channels available at run-time.
So, the suggestion here is to switch to dynamically assigning
both host DMA channels and link DMA channels are run-time.
The host DMA channel is assigned when the pcm
is opened as before. While choosing the link DMA channel,
if the host DMA channel corresponding to the link DMA channel
is already taken, the proposed method checks to make
sure that the BE is connected to the FE that has been assigned
this host DMA channel. Once the link DMA channel is assigned,
an IPC is sent to the DSP to set the link DMA channel.
The link DMA channel is freed during hw_free() and also in the
SUSPEND trigger callback. It will be re-assigned when hw_params
are set upon resume.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the cpu_dai_name member to snd_sof_dai and save the
cpu_dai_name while setting the DAI config.
The internal SOF representation will have to change at a later point
as well when we have multiple CPU dais.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new macro to get sof_intel_hda_stream from hdac_ext_stream.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a snd_sof_dev member to sof_intel_hda_stream. This will be
used to access the snd_sof_dev during link hw_params callback.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
While the suspend function is already marked __maybe_unused,
the resume function is not, which leads to a warning when
CONFIG_PM is disabled:
sound/soc/codecs/cx2072x.c:1625:12: error: unused function 'cx2072x_runtime_resume' [-Werror,-Wunused-function]
Mark this one like the other one.
Fixes: a497a43637 ("ASoC: Add support for Conexant CX2072X CODEC")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Without this, we get a link error:
sound/soc/rockchip/rockchip_pdm.o: In function `rockchip_pdm_hw_params':
rockchip_pdm.c:(.text+0x754): undefined reference to `rational_best_approximation'
Fixes: 624e8e00ac ("ASoC: rockchip: pdm: fixup pdm fractional div")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
In current implementation, establishment connection corresponds to
allocation of isochronous resources. Although this is an ideal
implementation of CMP described in IEC 61883-1, it's not enough
efficient to recover PCM substream multiplexed in packet streaming.
The packet streaming can always restart on the same allocated
isochronous resources even if the previous packet streaming
corrupted.
This commit splits allocation of isochronous resources from
establishment of connection so that CMP runs with allocated
isochronous resources.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The operation of duplex streams should be in critical section.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The operation of duplex streams should be in critical section.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The pairs of rawmidi.hw_params callback functions and .hw_free callback
functions for both direction have no differences.
This commit unifies the pairs.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The pairs of pcm.hw_params callback functions and .hw_free callback
functions for both direction have no differences.
This commit unifies the pairs.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The conversion here is really trivial: just a bunch of title
markups and very few puntual changes is enough to make it to
be parsed by Sphinx and generate a nice html.
The conversion is actually:
- add blank lines and identation in order to identify paragraphs;
- fix tables markups;
- add some lists markups;
- mark literal blocks;
- adjust title markups.
At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The kbuild documentation clearly shows that the documents
there are written at different times: some use markdown,
some use their own peculiar logic to split sections.
Convert everything to ReST without affecting too much
the author's style and avoiding adding uneeded markups.
The conversion is actually:
- add blank lines and identation in order to identify paragraphs;
- fix tables markups;
- add some lists markups;
- mark literal blocks;
- adjust title markups.
At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
you might feel like a deja vu to receive a bulk of changes at rc5,
and it happens again; we've got a collection of fixes for ASoC.
Most of fixes are targeted for the newly merged SOF (Sound Open
Firmware) stuff and the relevant fixes for Intel platforms.
Other than that, there are a few regression fixes for the recent
ASoC core changes and HD-audio quirk, as well as a couple of
FireWire fixes and for other ASoC codecs.
-----BEGIN PGP SIGNATURE-----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=9U0L
-----END PGP SIGNATURE-----
Merge tag 'sound-5.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"It might feel like deja vu to receive a bulk of changes at rc5, and it
happens again; we've got a collection of fixes for ASoC. Most of fixes
are targeted for the newly merged SOF (Sound Open Firmware) stuff and
the relevant fixes for Intel platforms.
Other than that, there are a few regression fixes for the recent ASoC
core changes and HD-audio quirk, as well as a couple of FireWire fixes
and for other ASoC codecs"
* tag 'sound-5.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (54 commits)
Revert "ALSA: hda/realtek - Improve the headset mic for Acer Aspire laptops"
ALSA: ice1712: Check correct return value to snd_i2c_sendbytes (EWS/DMX 6Fire)
ALSA: oxfw: allow PCM capture for Stanton SCS.1m
ALSA: firewire-motu: fix destruction of data for isochronous resources
ASoC: Intel: sst: fix kmalloc call with wrong flags
ASoC: core: Fix deadlock in snd_soc_instantiate_card()
SoC: rt274: Fix internal jack assignment in set_jack callback
ALSA: hdac: fix memory release for SST and SOF drivers
ASoC: SOF: Intel: hda: use the defined ppcap functions
ASoC: core: move DAI pre-links initiation to snd_soc_instantiate_card
ASoC: Intel: cht_bsw_rt5672: fix kernel oops with platform_name override
ASoC: Intel: cht_bsw_nau8824: fix kernel oops with platform_name override
ASoC: Intel: bytcht_es8316: fix kernel oops with platform_name override
ASoC: Intel: cht_bsw_max98090: fix kernel oops with platform_name override
ASoC: sun4i-i2s: Add offset to RX channel select
ASoC: sun4i-i2s: Fix sun8i tx channel offset mask
ASoC: max98090: remove 24-bit format support if RJ is 0
ASoC: da7219: Fix build error without CONFIG_I2C
ASoC: SOF: Intel: hda: Fix COMPILE_TEST build error
ASoC: SOF: fix DSP oops definitions in FW ABI
...
This reverts commit 9cb40eb184.
This patch introduces noise and headphone playback issue after
rebooting or suspending/resuming. Let us revert it.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=203831
Fixes: 9cb40eb184 ("ALSA: hda/realtek - Improve the headset mic for Acer Aspire laptops")
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Always get kcontrol value from cache, set kcontrol value to DSP
when DSP is active. Kcontrol values will be restored when DSP boot up.
We will set the default value of kcontrol in sof_complete to make sure
the value is align with firmware.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The settling time of DMIC DC level is both platform and used
microphone model specific. The unmute gain ramp is used to conceal
most of the large DC level seen in beginning of capture. This patch
adds into the DMIC DAI IPC struct a new field called unmute_ramp_time
and a new token SOF_TKN_INTEL_DMIC_UNMUTE_RAMP_TIME. The value is the
ramp length in milliseconds (ms).
The ABI minor version is incremented for this backwards compatible
change.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver currently passes the volume ramp type and length
topology tokens to firmware, but the min and max volume are
not set. This patch provides a correction to convert the
information from the topology file and pass the linear volume
min/max value to the firmware to improve transitions.
Signed-off-by: Zhu Yingjiang <yingjiang.zhu@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
add two units min_volume_step and max_volume_step to the snd_sof_control
struct, for the min and max step of the volume_table.
Signed-off-by: Zhu Yingjiang <yingjiang.zhu@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cppcheck complains about the following warning, fix by adding
parentheses
[sound/soc/sof/ipc.c:783]:
(style) Clarify calculation precedence for '&' and '?'.
[sound/soc/sof/ipc.c:785]:
(style) Clarify calculation precedence for '&' and '?'.
[sound/soc/sof/ipc.c:787]:
(style) Clarify calculation precedence for '&' and '?'.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of the suspend flow, a context save IPC message is
sent to the firmware before powering down the DSP. If errors
are met, the suspend flow is aborted with current code.
Change the behaviour such that if firmware returns -EBUSY or
-EAGAIN, return the error codes to PM core as before. The device
is left in active state in this case.
If other errors are reported, print a warning but do not block the
suspend flow. As per interface specification, no valid error can be
returned in this scenario. If the hardware has hit a fatal error and
is not able to respond successfully, best recovery method is to
proceed with suspend and power off the DSP.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Extend the HDA IPC dump implementation with status of key IRQ
registers. This is useful to debug IPC timeouts and similar
issues.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
If the firmware is set for verbose tracing, the kernel log is flooded
with ipc rx/ipc rx done messages. Prevent logging those unless the
verbose IPC debugging config option is set.
Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The topology code can create a FE DAI link but did not allocate the
memory for a platform component - whose name can be overridden at a
later time.
Fixes: 23b946ce28 ("ASoC: soc-topology: use modern dai_link style")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Clang produces the following warning
sound/soc/codecs/tas571x.c:666:38: warning: unused variable
'tas5721_controls' [-Wunused-const-variable]
In the chip struct definition tas5711_controls is used rather than
tac5712_controls. Looks like a typo was made in the original commit.
Since tac5711_controls is identical to tas5721_controls we can just swap
them
Cc: clang-built-linux@googlegroups.com
Link: https://github.com/ClangBuiltLinux/linux/issues/522
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
There a mix of SND_SOC_DAIFMT_ and SND_SOC_DAI_FORMAT_ in
axg-tdm-interface.c. Even, if this is currently the same thing, lets use
the same group consistently.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
In display codecs supported by hdac_hdmi, the connection indices are
shared by all converters. At boot and resume from suspend,
the connection state may be reset to default values.
In case of multiple connected pins (multiple monitors connected
with audio capability), routing and mute status of pins that
are not connected to any PCM, may interfere with other pins.
E.g. after resume from S3 with multiple monitors, unless
all converters are in active use, playback to some PCMs may
be muted due to the default settings of unrelated converters.
Avoid this by ensuring all pin:cvt selections are correct
in codec whenever a converter is enabled for playback.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The content of SND_SOC_DAIFMT_FORMAT_MASK is a number, not a bitfield,
so the test to check if the format is i2s is wrong. Because of this the
clock setting may be wrong. For example, the sample clock gets inverted
in DSP B mode, when it should not.
Fix the lrclk invert helper function
Fixes: 1a11d88f49 ("ASoC: meson: add tdm formatter base driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Right justified format is actually not supported by the amlogic tdm output
encoder.
Fixes: c41c2a355b ("ASoC: meson: add tdm output driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Right justified format is actually not supported by the amlogic tdm input
decoder.
Fixes: 13a22e6a98 ("ASoC: meson: add tdm input driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
There's an awful lot of fixes here, almost all for the newly introduced
SoF DSP drivers (including a few things it turned up in shared code).
This is a large and complex piece of code so it's not surprising that
there have been quite a few issues here, fortunately things seem to have
mostly calmed down now. Otherwise there's just a smattering of small fixes.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl0CaS4THGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0Ia0B/9wO0pSbtZjH63zg6khj+HQKuw5HG+5
3tYMZml0c/vAmJxHCPlgGZRwRSq7rFCyJS+e4bBMCfWdjHtFuFkZtQ+jNbOxN5vf
50/L/ixXs/iWQ4u9CV7wBUSTQgqQav4T5KWCQcYcY56hR20ubmT8K/MFTYOVIwhs
VftWpUThi/onqgRoO08ZyKjcIoqJK9UqvNllSbCb2qY2zgCc9GmWcWbtTYKbFsLP
czcHx9Wid0k3FlY+FqleGRyre7m1Gun94cxc3MQFOt7CO47x8gVQdMJVI+iAwRlQ
5Fz+l+7oaYYpAgLhdrw0scHGU58C46h3KCQmAhYUk8NzqLB9ev6QGe18
=SMgt
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.2-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.2
There's an awful lot of fixes here, almost all for the newly introduced
SoF DSP drivers (including a few things it turned up in shared code).
This is a large and complex piece of code so it's not surprising that
there have been quite a few issues here, fortunately things seem to have
mostly calmed down now. Otherwise there's just a smattering of small fixes.
We need dmic16k BE(and FE, in tplg file) dailink for keyword detection
feature on bxt-da7219-max98357a machine, here add it in driver side.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no pull-up resistor at IRQ line where it connects from
the codec to SoC. When booting, the signal of IRQ pin will keep low
which makes the SoC invoke the ISR repeatedly because the IRQ is
registered trigger low. It will not stop until the codec sets up
the interruption and pulls the signal high. In the patch,
nau8825 will internally pull the signal to high at booting in case
the fake interrupts happen.
Signed-off-by: John Hsu <KCHSU0@nuvoton.com>
Tested-by: Cheng-Yi Chiang <cychiang@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
In the commit 7f641e26a6 (ALSA: hda/hdmi
- Consider eld_valid when reporting jack event) the eld_valid check was
added for the jack event reports. Do the same in sync_eld_via_acomp()
function. Apparently, it is required for the NVIDIA proprietary driver
(monitor presence reported first, but ELD is available later).
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add HD Audio Device PCI ID for the Intel Elkhart Lake
platform.
Signed-off-by: Lai, Poey Seng <poey.seng.lai@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit fixes the warning due to returning uninitialized value
from start_streams() helper function.
sound/firewire/dice/dice-stream.c: In function 'start_streams.isra.0':
>> sound/firewire/dice/dice-stream.c:350:6: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized]
int err;
^~~
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: 3cd2c2d780 ("ALSA: dice: reserve/release isochronous resources in pcm.hw_params/hw_free callbacks")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a part of preparation to perform allocation/release
of isochronous resources in pcm.hw_params/hw_free callbacks.
This commit splits out an operation to configure stream parameters into
pcm.hw_params callback. In pcm.prepare callback, establishing
connections and start isochronous contexts.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a part of preparation to perform allocation/release
of isochronous resources in pcm.hw_params/hw_free callbacks.
At present, several operations are done in pcm.prepare callback. To
reduce load of the callback, This commit splits out an operation to
set packet format in pcm.hw_params callback.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In former commits, two isochronous contexts are handles at the same
time. This commit unifies stream counters to obsolete them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In former commits, ALSA oxfw driver handles two isochronous contexts
at the same time, except for some devices which supports one endpoint
of isochronous packet stream.
This commit renames some helper functions so that they handles duplex
streams.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The helper function stop packet streaming is not enough useful. This
commit obsoletes it and expands its code.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In most cases, recovery from bus reset is not successful. This commit
aborts packet streaming in bus reset handler.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It's inconvenient to handle two isochronous context separately
each other. This commit unifies the counters to handle the two
at the same time.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
After a call of pcm.hw_params, the state of target device is expected
for applications. This commit retrieves the state and start packet
streaming.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit unifies stop condition due to queueing error and unmatched
state of the target device.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When stopping packet streaming, no need to stop PCM substream with XRUN
state. This commit suppresses it.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a part of preparation to perform allocation/release
of isochronous resources in pcm.hw_params/hw_free callbacks.
This commit splits out an operation to configure stream parameters into
pcm.hw_params callback. In pcm.prepare callback, establishing
connections and start isochronous contexts.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a part of preparation to perform allocation/release
of isochronous resources in pcm.hw_params/hw_free callbacks.
At present, several operations are done in pcm.prepare callback. To
reduce load of the callback, This commit splits out an operation to
set sampling transfer frequency in pcm.hw_params callback.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Two sets of callbacks for pcm.hw_params/hw_free but they have the same
codes. This commit unifies each of the callbacks.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Two sets of callbacks for rawmidi.open/close but they have the same
codes. This commit unifies each of the callbacks.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a part of preparation to perform allocation/release
of isochronous resources in pcm.hw_params/hw_free callbacks.
It's inconvenient to handle two isochronous context separately
each other. This commit unifies the counters to handle the two
at the same time.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit changes helper functions to initialize/destroy stream
data so that it has an argument for direction.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The private structure of this driver has 'connected' member but nowadays
it's useless. This commit removes it.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When stopping packet streaming, no need to stop PCM substream with XRUN
state. This commit suppresses it.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a part of preparation to perform allocation/release
of isochronous resources in pcm.hw_params/hw_free callbacks.
At present, several operations are done in pcm.prepare callback. To
reduce load of the callback, This commit splits out an operation to
set sampling transfer frequency in pcm.hw_params callback.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When McASP is bus master and it's AUXCLK clock is not static, but it is
a multiple of the frame sync the constraint rules should take it account
when validating possible stream formats.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver selects the proper BCLK divide through the BCLK and FS
at the hardware parameter when the I2S master mode.
Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Signed-off-by: John Hsu <KCHSU0@nuvoton.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Response tag only occupies 6 bits, not 7. This bug is harmless, since
the value has just been shifted to the right by 26 bits, so this is
only a cosmetic fix.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The pairs of pcm.hw_params callbacks and .hw_free callbacks for both
direction have no differences.
This commit unifies the pairs.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
After bus reset, isochronous resource manager releases all of allocated
isochronous resources. The nodes to transfer isochronous packet should
request reallocation of the resources.
However, between the bus-reset and invocation of 'struct fw_driver.update'
handler, ALSA PCM application can detect this situation by XRUN because
the target device cancelled to transmit packets once bus-reset occurs.
Due to the above mechanism, ALSA fireface driver just stops packet
streaming in the update handler, thus pcm.prepare handler should
request the reallocation.
This commit requests the reallocation in pcm.prepare callback when
bus generation is changed.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Once allocated, isochronous resources are available for packet
streaming, even if the streaming is cancelled. For this reason,
current implementation handles allocation of the resources and
starting packet streaming at the same time. However, this brings
complicated procedure to start packet streaming.
This commit separates the allocation and starting. The allocation is
done in pcm.hw_params callback and available till pcm.hw_free callback.
Even if any XRUN occurs, pcm.prepare callback is done to restart
packet streaming without releasing/allocating the resources.
There are two points to stop packet streaming; in pcm.hw_params and
pcm.prepare callbacks. The former point is a case that packet streaming
is already started for any MIDI substream then packet streaming is
requested with different sampling transfer frequency for any PCM
substream. The latter point is cases of any XRUN or packet queueing
error.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a part of preparation to perform allocation/release
of isochronous resources in pcm.hw_params/hw_free callbacks.
This commit adds a helper function to allocate isochronous resources,
separated from operations to start packet streaming, I note that some
dice-based devices have two pair of endpoints for isochronous packet
straeming.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a part of preparation to perform allocation/release
of isochronous resources in pcm.hw_params/hw_free callbacks.
There're three points to finish packet streaming but no helper
functions for common operations for it. This commit adds a helper
function for operations to finish packet streaming.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The pairs of pcm.hw_params callbacks and .hw_free callbacks for both
direction have no differences.
This commit unifies the pairs.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
After bus reset, isochronous resource manager releases all of allocated
isochronous resources. The nodes to transfer isochronous packet should
request reallocation of the resources.
However, between the bus-reset and invocation of 'struct fw_driver.update'
handler, ALSA PCM application can detect this situation by XRUN because
the target device cancelled to transmit packets once bus-reset occurs.
Due to the above mechanism, ALSA fireface driver just stops packet
streaming in the update handler, thus pcm.prepare handler should
request the reallocation.
This commit requests the reallocation in pcm.prepare callback when
bus generation is changed.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Once allocated, isochronous resources are available for packet
streaming, even if the streaming is cancelled. For this reason,
current implementation handles allocation of the resources and
starting packet streaming at the same time. However, this brings
complicated procedure to start packet streaming.
This commit separates the allocation and starting. The allocation is
done in pcm.hw_params callback and available till pcm.hw_free callback.
Even if any XRUN occurs, pcm.prepare callback is done to restart
packet streaming without releasing/allocating the resources.
There are two points to stop packet streaming; in pcm.hw_params and
pcm.prepare callbacks. The former point is a case that packet streaming
is already started for any MIDI substream then packet streaming is
requested with different sampling transfer frequency for any PCM
substream. The latter point is cases of any XRUN or packet queueing
error.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a part of preparation to perform allocation/release
of isochronous resources in pcm.hw_params/hw_free callbacks.
All of models in Digidesign Digi00x family have the same formation of
data channels in isochronous packet for both directions. This commit
simplifies allocation of isochronous resources in this point.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a part of preparation to perform allocation/release
of isochronous resources in pcm.hw_params/hw_free callbacks.
The caller of begin_session() calls finish_session() in its error path,
thus no need to call finish_session() in error path of begin_session().
This commit simplifies error path of begin_session().
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a part of preparation to perform allocation/release
of isochronous resources in pcm.hw_params/hw_free callbacks.
The operation to finish packet streaming corresponds to stopping
isochronous contexts. This commit applies code refactoring to
move codes to stop into a helper function to finish the session.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a part of preparation to perform allocation/release
of isochronous resources in pcm.hw_params/hw_free callbacks.
The registration of isochronous channels is done just after allocation
of isochronous resources. This commit separates the registration just
before starting packet streaming.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Emagic Unitor 8 does not provide iManufacturer and iProduct fields
in its device descriptor. These fields are used by alsa to make build the
device name. Thus uncomment the .product-name in the quirks-table.
Without this change the device shows up as 'USB Device 0x86a:0x01'.
Output of lsusb and amidi:
https://gist.github.com/ensonic/7820a102e91f31575be355da2b6b33bc
Signed-off-by: Stefan Sauer <ensonic@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Check for exact and correct return value to snd_i2c_sendbytes
call for EWS/DMX 6Fire (snd_ice1712).
Fixes a systemic error on every boot starting from kernel 5.1
onwards to snd_ice1712 driver ("cannot send pca") on Terratec
EWS/DMX 6Fire PCI soundcards.
Check for exact and correct return value to snd_i2c_sendbytes
call for EWS/DMX 6Fire (snd_ice1712).
Fixes a systemic error on every boot to snd_ice1712 driver
("cannot send pca") on Terratec EWS/DMX 6Fire PCI soundcards.
Fixes: c99776cc40 ("ALSA: ice1712: fix a missing check of snd_i2c_sendbytes")
Signed-off-by: Rui Nuno Capela <rncbc@rncbc.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stanton SCS.1m can transfer isochronous packet with Multi Bit Linear
Audio data channels, therefore it allows software to capture PCM
substream. However, ALSA oxfw driver doesn't.
This commit changes the driver to add one PCM substream for capture
direction.
Fixes: de5126cc3c ("ALSA: oxfw: add stream format quirk for SCS.1 models")
Cc: <stable@vger.kernel.org> # v4.5+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The pairs of pcm.hw_params callbacks and .hw_free callbacks for both
direction have no differences.
This commit unifies the pairs.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The operation to finish packet streaming corresponds to stopping
isochronous contexts.
This commit applies code refactoring to move codes to stop into
a helper function to finish the session.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
After bus reset, isochronous resource manager releases all of allocated
isochronous resources. The nodes to restart packet streaming should
request reallocation of the resources.
However, between the bus-reset and invocation of 'struct fw_driver.update'
handler, ALSA PCM application can detect this situation by XRUN because
the target device cancelled to transmit packets once bus-reset occurs.
Due to the above mechanism, ALSA fireface driver just stops packet
streaming in the update handler, thus pcm.prepare handler should
request the reallocation.
This commit requests the reallocation in pcm.prepare callback when
bus generation is changed.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Once allocated, isochronous resources are available for packet
streaming, even if the streaming is cancelled. For this reason,
current implementation handles allocation of the resources and
starting packet streaming at the same time. However, this brings
complicated procedure to start packet streaming.
This commit separates the allocation and starting. The allocation is
done in pcm.hw_params callback and available till pcm.hw_free callback.
Even if any XRUN occurs, pcm.prepare callback is done to restart
packet streaming for allocated the resources.
There are two points to stop packet streaming; in pcm.hw_params and
pcm.prepare callbacks.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a part of preparation to perform allocation/release
of isochronous channels in pcm.hw_params/hw_free callbacks.
This commit implements allocate_resources callback for the protocol
specific to latter models. The encoded values of constant table is
split into several condition statements to separate the operation
to configure sampling transfer frequency from the operation to
configure the number of data channels in rx packet.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a part of preparation to perform allocation/release
of isochronous channels in pcm.hw_params/hw_free callbacks.
This commit implements allocate_resources callback for ff400 protocol.
In this callback, sampling transfer frequency is configured to the
device as well.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a part of preparation to perform allocation/release
of isochronous channels in pcm.hw_params/hw_free callbacks.
This commit implements allocate_resources callback for ff800 protocol.
As I noted in commit fc716397a5 ("ALSA: fireface: add support for
packet streaming on Fireface 800"), this unit allocates isochronous
resources for tx stream voluntarily. Therefore, this commit is to
maintain isochronous rsources for rx stream. In the callback,
sampling transfer frequency is configured to the device as well.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a part of preparation to perform allocation/release
of isochronous channels in pcm.hw_params/hw_free callbacks.
In ALSA fireface driver, the allocation of isochronous resources is
programmed in each implementation of protocol. This commit adds
protocol-specific operation for the allocation separated from
the operation to begin session.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The pairs of pcm.hw_params callbacks and .hw_free callbacks for both
direction have no differences.
This commit unifies the pairs.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The operation to finish packet streaming corresponds to stopping
isochronous contexts.
This commit applies code refactoring to move codes to stop into
a helper function to finish the session.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
After bus reset, isochronous resource manager releases all of allocated
isochronous resources. The nodes to restart packet streaming should
request reallocation of the resources.
However, between the bus-reset and invocation of 'struct fw_driver.update'
handler, ALSA PCM application can detect this situation by XRUN because
the target device cancelled to transmit packets once bus-reset occurs.
Due to the above mechanism, ALSA firewire-tascam driver just stops
packet streaming in the update handler, thus pcm.prepare handler
should request the reallocation.
This commit requests the reallocation in pcm.prepare callback when
bus generation is changed.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Once allocated, isochronous resources are available for packet
streaming, even if the streaming is cancelled. For this reason,
current implementation handles allocation of the resources and
starting packet streaming at the same time. However, this brings
complicated procedure to start packet streaming.
This commit separates the allocation and starting. The allocation is
done in pcm.hw_params callback and available till pcm.hw_free callback.
Even if any XRUN occurs, pcm.prepare callback is done to restart
packet streaming for allocated the resources.
There are two points to stop packet streaming; in pcm.hw_params and
pcm.prepare callbacks.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a part of preparation to perform allocation/release
of isochronous channels in pcm.hw_params/hw_free callbacks.
This commit obsoletes a helper function to release isochronous resources
for both direction.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a part of preparation to perform allocation/release
of isochronous channels in pcm.hw_params/hw_free callbacks.
This commit applies minor code refactoring for a helper function to
allocate isochronous resources.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a part of preparation to perform allocation/release
of isochronous channels in pcm.hw_params/hw_free callbacks.
The registration of isochronous channels is done just after allocation
of isochronous resources. This commit separates the registration just
before starting packet streaming.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fixes gcc '-Wunused-but-set-variable' warning:
sound/pci/lx6464es/lx_core.c: In function 'lx_interrupt_handle_async_events':
sound/pci/lx6464es/lx_core.c:990:6: warning:
variable 'urun_mask' set but not used [-Wunused-but-set-variable]
sound/pci/lx6464es/lx_core.c:989:6: warning:
variable 'orun_mask' set but not used [-Wunused-but-set-variable]
They are never used, so can be removed.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The data for isochronous resources is not destroyed in expected place.
This commit fixes the bug.
Cc: <stable@vger.kernel.org> # v4.12+
Fixes: 9b2bb4f2f4 ("ALSA: firewire-motu: add stream management functionality")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When using modern dai_link style, we must first make sure the
struct snd_soc_dai_link_component exists before accessing its members.
In case of early probe deferral, some of the '.cpus' or '.codecs' may not
have been allocated yet. Check this before calling of_node_put() on the
structure member.
Fixes: c84836d7f6 ("ASoC: meson: axg-card: use modern dai_link style")
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the client_mutex lock to snd_soc_unbind_card() before
removing link components. This prevents the deadlock
in the error path in snd_soc_instantiate_card().
Fixes: 34ac3c3eb8 (ASoC: core: lock client_mutex while removing
link components)
Reported-by: kernelci.org bot <bot@kernelci.org>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
When soc_init_dai_link() call at the beginning of snd_soc_instantiate_card
function fails soc_cleanup_card_resources() and then snd_soc_dapm_free()
gets called with an incompletely initialized card->dapm. In particular
card->dapm.card is NULL and it gets dereferenced in dapm_free_widgets().
Also dapm->list is invalid and there is an invalid pointer dereference
from list_del().
The function call stack (deferred probing) on Chromebook Snow where this
issue has shown up in today's -next is:
snd_soc_dapm_free
soc_cleanup_card_resources
snd_soc_instantiate_card
snd_soc_register_card
devm_snd_soc_register_card
snow_probe
In patch 70fc53734e "ASoC: core: move DAI pre-links initiation to
snd_soc_instantiate_card" there is an soc_cleanup_platform() call instead
of soc_cleanup_card_resources() as in current -next.
soc_cleanup_platform got renamed to soc_cleanup_legacy, then removed
in commit adb76b5b9c "ASoC: soc-core: remove legacy style dai_link".
It seems in merge conflict resolution the soc_cleanup_platform() call got
renamed to soc_cleanup_card_resources(), instead of being removed.
Correct this by removing an unnecessary soc_cleanup_card_resources() call.
Fixes: a8e992342c ("Merge branch 'asoc-5.2' into asoc-5.3")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Suggested-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds sidetone support via one of the 3 RX Mix paths
using IIR1 and IIR2.
IIR1 can be feed by any Decimators or RX paths, and IIRx can also be
looped back to RX mixers to provide sidetone functionality.
Two IIR filters are used for Side tone equalization and each filter
is 5 stage.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
All drivers switched to modern style dai_link
(= struct snd_soc_dai_link_component).
Let's remove legacy style dai_link.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC is now supporting modern style dai_link
(= snd_soc_dai_link_component) for CPU/Codec/Platform.
This patch switches to use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC is now supporting modern style dai_link
(= snd_soc_dai_link_component) for CPU/Codec/Platform.
This patch switches to use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC is now supporting modern style dai_link
(= snd_soc_dai_link_component) for CPU/Codec/Platform.
This patch switches to use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC is now supporting modern style dai_link
(= snd_soc_dai_link_component) for CPU/Codec/Platform.
This patch switches to use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC is now supporting modern style dai_link
(= snd_soc_dai_link_component) for CPU/Codec/Platform.
This patch switches to use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC is now supporting modern style dai_link
(= snd_soc_dai_link_component) for CPU/Codec/Platform.
This patch switches to use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC is now supporting modern style dai_link
(= snd_soc_dai_link_component) for CPU/Codec/Platform.
This patch switches to use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC is now supporting modern style dai_link
(= snd_soc_dai_link_component) for CPU/Codec/Platform.
This patch switches to use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC is now supporting modern style dai_link
(= snd_soc_dai_link_component) for CPU/Codec/Platform.
This patch switches to use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC is now supporting modern style dai_link
(= snd_soc_dai_link_component) for CPU/Codec/Platform.
This patch switches to use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC is now supporting modern style dai_link
(= snd_soc_dai_link_component) for CPU/Codec/Platform.
This patch switches to use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC is now supporting modern style dai_link
(= snd_soc_dai_link_component) for CPU/Codec/Platform.
This patch switches to use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC is now supporting modern style dai_link
(= snd_soc_dai_link_component) for CPU/Codec/Platform.
This patch switches to use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC is now supporting modern style dai_link
(= snd_soc_dai_link_component) for CPU/Codec/Platform.
This patch switches to use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC is now supporting modern style dai_link
(= snd_soc_dai_link_component) for CPU/Codec/Platform.
This patch switches to use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC is now supporting modern style dai_link
(= snd_soc_dai_link_component) for CPU/Codec/Platform.
This patch switches to use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC is now supporting modern style dai_link
(= snd_soc_dai_link_component) for CPU/Codec/Platform.
This patch switches to use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Amadeusz Sławiński