Return a non-zero st_blocks to userspace for statfs() and friends.
Some versions of tar will assume that files with st_blocks == 0
do not contain any data and will skip reading them entirely.
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Pair the two trace events to make troubeshooting writepages
easier, and it should be more convinient to write a simple script
to parse the traces.
Cc: linux-ext4@vger.kernel.org
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Commit 4e7ea81db5(ext4: restructure writeback path) introduces another
performance regression on random write:
- one more page may be added to ext4 extent in
mpage_prepare_extent_to_map, and will be submitted for I/O so
nr_to_write will become -1 before 'done' is set
- the worse thing is that dirty pages may still be retrieved from page
cache after nr_to_write becomes negative, so lots of small chunks
can be submitted to block device when page writeback is catching up
with write path, and performance is hurted.
On one arm A15 board with sata 3.0 SSD(CPU: 1.5GHz dura core, RAM:
2GB, SATA controller: 3.0Gbps), this patch can improve below test's
result from 157MB/sec to 174MB/sec(>10%):
dd if=/dev/zero of=./z.img bs=8K count=512K
The above test is actually prototype of block write in bonnie++
utility.
This patch makes sure no more pages than nr_to_write can be added to
extent for mapping, so that nr_to_write won't become negative.
Cc: linux-ext4@vger.kernel.org
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Document give_up_on_write argument of mpage_map_and_submit_extent().
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The Linux Kernel Performance project guys have reported that commit
4e7ea81db5 introduces a performance regression for the following fio
workload:
[global]
direct=0
ioengine=mmap
size=1500M
bs=4k
pre_read=1
numjobs=1
overwrite=1
loops=5
runtime=300
group_reporting
invalidate=0
directory=/mnt/
file_service_type=random:36
file_service_type=random:36
[job0]
startdelay=0
rw=randrw
filename=data0/f1:data0/f2
[job1]
startdelay=0
rw=randrw
filename=data0/f2:data0/f1
...
[job7]
startdelay=0
rw=randrw
filename=data0/f2:data0/f1
The culprit of the problem is that after the commit ext4_writepages()
are more aggressive in writing back pages. Thus we have less consecutive
dirty pages resulting in more seeking.
This increased aggressivity is caused by a bug in the condition
terminating ext4_writepages(). We start writing from the beginning of
the file even if we should have terminated ext4_writepages() because
wbc->nr_to_write <= 0.
After fixing the condition the throughput of the fio workload is about 20%
better than before writeback reorganization.
Reported-by: "Yan, Zheng" <zheng.z.yan@intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
truncate_pagecache() doesn't care about old size since commit
cedabed49b ("vfs: Fix vmtruncate() regression"). Let's drop it.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull vfs pile 1 from Al Viro:
"Unfortunately, this merge window it'll have a be a lot of small piles -
my fault, actually, for not keeping #for-next in anything that would
resemble a sane shape ;-/
This pile: assorted fixes (the first 3 are -stable fodder, IMO) and
cleanups + %pd/%pD formats (dentry/file pathname, up to 4 last
components) + several long-standing patches from various folks.
There definitely will be a lot more (starting with Miklos'
check_submount_and_drop() series)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (26 commits)
direct-io: Handle O_(D)SYNC AIO
direct-io: Implement generic deferred AIO completions
add formats for dentry/file pathnames
kvm eventfd: switch to fdget
powerpc kvm: use fdget
switch fchmod() to fdget
switch epoll_ctl() to fdget
switch copy_module_from_fd() to fdget
git simplify nilfs check for busy subtree
ibmasmfs: don't bother passing superblock when not needed
don't pass superblock to hypfs_{mkdir,create*}
don't pass superblock to hypfs_diag_create_files
don't pass superblock to hypfs_vm_create_files()
oprofile: get rid of pointless forward declarations of struct super_block
oprofilefs_create_...() do not need superblock argument
oprofilefs_mkdir() doesn't need superblock argument
don't bother with passing superblock to oprofile_create_stats_files()
oprofile: don't bother with passing superblock to ->create_files()
don't bother passing sb to oprofile_create_files()
coh901318: don't open-code simple_read_from_buffer()
...
Add support to the core direct-io code to defer AIO completions to user
context using a workqueue. This replaces opencoded and less efficient
code in XFS and ext4 (we save a memory allocation for each direct IO)
and will be needed to properly support O_(D)SYNC for AIO.
The communication between the filesystem and the direct I/O code requires
a new buffer head flag, which is a bit ugly but not avoidable until the
direct I/O code stops abusing the buffer_head structure for communicating
with the filesystems.
Currently this creates a per-superblock unbound workqueue for these
completions, which is taken from an earlier patch by Jan Kara. I'm
not really convinced about this use and would prefer a "normal" global
workqueue with a high concurrency limit, but this needs further discussion.
JK: Fixed ext4 part, dynamic allocation of the workqueue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Use wait_for_stable_page() instead of wait_on_page_writeback()
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
The following race can lead to a loss of i_disksize update from truncate
thus resulting in a wrong inode size if the inode size isn't updated
again before inode is reclaimed:
ext4_setattr() mpage_map_and_submit_extent()
EXT4_I(inode)->i_disksize = attr->ia_size;
... ...
disksize = ((loff_t)mpd->first_page) << PAGE_CACHE_SHIFT
/* False because i_size isn't
* updated yet */
if (disksize > i_size_read(inode))
/* True, because i_disksize is
* already truncated */
if (disksize > EXT4_I(inode)->i_disksize)
/* Overwrite i_disksize
* update from truncate */
ext4_update_i_disksize()
i_size_write(inode, attr->ia_size);
For other places updating i_disksize such race cannot happen because
i_mutex prevents these races. Writeback is the only place where we do
not hold i_mutex and we cannot grab it there because of lock ordering.
We fix the race by doing both i_disksize and i_size update in truncate
atomically under i_data_sem and in mpage_map_and_submit_extent() we move
the check against i_size under i_data_sem as well.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
Merge conditions in ext4_setattr() handling inode size changes, also
move ext4_begin_ordered_truncate() call somewhat earlier because it
simplifies error recovery in case of failure. Also add error handling in
case i_disksize update fails.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
Inode size can arbitrarily change while writeback is in progress. When
ext4_writepages() has prepared a long extent for mapping and truncate
then reduces i_size, mpage_map_and_submit_buffers() will always map just
one buffer in a page instead of all of them due to lblk < blocks check.
So we end up not using all blocks we've allocated (thus leaking them)
and also delalloc accounting goes wrong manifesting as a warning like:
ext4_da_release_space:1333: ext4_da_release_space: ino 12, to_free 1
with only 0 reserved data blocks
Note that the problem can happen only when blocksize < pagesize because
otherwise we have only a single buffer in the page.
Fix the problem by removing the size check from the mapping loop. We
have an extent allocated so we have to use it all before checking for
i_size. We also rename add_page_bufs_to_extent() to
mpage_process_page_bufs() and make that function submit the page for IO
if all buffers (upto EOF) in it are mapped.
Reported-by: Dave Jones <davej@redhat.com>
Reported-by: Zheng Liu <gnehzuil.liu@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
Currently the logic whether the current buffer can be added to an extent
of buffers to map is split between mpage_add_bh_to_extent() and
add_page_bufs_to_extent(). Move the whole logic to
mpage_add_bh_to_extent() which makes things a bit more straightforward
and make following i_size fixes easier.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
Don't use an unsigned long long for the es_status flags; this requires
that we pass 64-bit values around which is painful on 32-bit systems.
Instead pass the extent status flags around using the low 4 bits of an
unsigned int, and shift them into place when we are reading or writing
es_pblk.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Commit 0713ed0cde added
jbd2_journal_file_inode() call into ext4_block_zero_page_range().
However that function gets called from truncate path and thus inode
needn't have jinode attached - that happens in ext4_file_open() but
the file needn't be ever open since mount. Calling
jbd2_journal_file_inode() without jinode attached results in the oops.
We fix the problem by attaching jinode to inode also in ext4_truncate()
and ext4_punch_hole() when we are going to zero out partial blocks.
Reported-by: majianpeng <majianpeng@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In commit 921f266b: ext4: add self-testing infrastructure to do a
sanity check, some sanity checks were added in map_blocks to make sure
'retval == map->m_len'.
Enable these checks by default and report any assertion failures using
ext4_warning() and WARN_ON() since they can help us to figure out some
bugs that are otherwise hard to hit.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If there are no items in the extent status tree, ext4_es_lru_add() is
a no-op. So it is not sufficient to call ext4_es_lru_add() before we
try to lookup an entry in the extent status tree. We also need to
call it at the end of ext4_ext_map_blocks(), after items have been
added to the extent status tree.
This could lead to inodes with that have extent status trees but which
are not in the LRU list, which means they won't get considered for
eviction by the es_shrinker.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Zheng Liu <wenqing.lz@taobao.com>
Cc: stable@vger.kernel.org
Replace "assertation" with "assertion" in lots and lots of debugging
messages.
Correct the comment stating when ext4_es_insert_extent() is used. It
was no doubt tree at one point, but it is no longer true...
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Zheng Liu <gnehzuil.liu@gmail.com>
The loop in mpage_map_and_submit_extent() is guaranteed to always run
at least once since the caller of mpage_map_and_submit_extent() makes
sure map->m_len > 0. So make that explicit using do-while instead of
pure while which also silences the compiler warning about
uninitialized 'err' variable.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
The function mpage_released_unused_page() must only be called once;
otherwise the kernel will BUG() when the second call to
mpage_released_unused_page() tries to unlock the pages which had been
unlocked by the first call.
Also restructure the error handling so that we only give up on writing
the dirty pages in the case of ENOSPC where retrying the allocation
won't help. Otherwise, a transient failure, such as a kmalloc()
failure in calling ext4_map_blocks() might cause us to give up on
those pages, leading to a scary message in /var/log/messages plus data
loss.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Currently if we pass range into ext4_zero_partial_blocks() which covers
entire block we would attempt to zero it even though we should only zero
unaligned part of the block.
Fix this by checking whether the range covers the whole block skip
zeroing if so.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The function ext4_write_inline_data_end() can return an error. So we
need to assign it to a signed integer variable to check for an error
return (since copied is an unsigned int).
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Zheng Liu <wenqing.lz@taobao.com>
Cc: stable@vger.kernel.org
No need to pass file pointer when we can directly pass inode pointer.
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Now we maintain an proper in-order LRU list in ext4 to reclaim entries
from extent status tree when we are under heavy memory pressure. For
keeping this order, a spin lock is used to protect this list. But this
lock burns a lot of CPU time. We can use the following steps to trigger
it.
% cd /dev/shm
% dd if=/dev/zero of=ext4-img bs=1M count=2k
% mkfs.ext4 ext4-img
% mount -t ext4 -o loop ext4-img /mnt
% cd /mnt
% for ((i=0;i<160;i++)); do truncate -s 64g $i; done
% for ((i=0;i<160;i++)); do cp $i /dev/null &; done
% perf record -a -g
% perf report
This commit tries to fix this problem. Now a new member called
i_touch_when is added into ext4_inode_info to record the last access
time for an inode. Meanwhile we never need to keep a proper in-order
LRU list. So this can avoid to burns some CPU time. When we try to
reclaim some entries from extent status tree, we use list_sort() to get
a proper in-order list. Then we traverse this list to discard some
entries. In ext4_sb_info, we use s_es_last_sorted to record the last
time of sorting this list. When we traverse the list, we skip the inode
that is newer than this time, and move this inode to the tail of LRU
list. When the head of the list is newer than s_es_last_sorted, we will
sort the LRU list again.
In this commit, we break the loop if s_extent_cache_cnt == 0 because
that means that all extents in extent status tree have been reclaimed.
Meanwhile in this commit, ext4_es_{un}register_shrinker()'s prototype is
changed to save a local variable in these functions.
Reported-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Rename ext4_da_writepages() to ext4_writepages() and use it for all
modes. We still need to iterate over all the pages in the case of
data=journalling, but in the case of nodelalloc/data=ordered (which is
what file systems mounted using ext3 backwards compatibility will use)
this will allow us to use a much more efficient I/O submission path.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Now that we clear PageWriteback after extent conversion, there's no
need to wait for io_end processing in ext4_evict_inode(). Running
AIO/DIO keeps file reference until aio_complete() is called so
ext4_evict_inode() cannot be called. For io_end structures resulting
from buffered IO waiting is happening because we wait for
PageWriteback in truncate_inode_pages().
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We don't have to wait for extent conversion in ext4_punch_hole() as
buffered IO for the punched range has been flushed and waited upon
(thus all extent conversions for that range have completed). Also we
wait for all DIO to finish using inode_dio_wait() so there cannot be
any extent conversions pending due to direct IO.
Also remove ext4_flush_unwritten_io() since it's unused now.
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Since PageWriteback bit is now cleared after extents are converted
from unwritten to written ones, we have full exclusion of writeback
path from truncate (truncate_inode_pages() waits for PageWriteback
bits to get cleared on all invalidated pages). Exclusion from DIO
path is achieved by inode_dio_wait() call in ext4_setattr(). So
there's no need to wait for extent convertion in ext4_truncate()
anymore.
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Make sure extent conversion after DIO happens while i_dio_count is
still elevated so that inode_dio_wait() waits until extent conversion
is done. This removes the need for explicit waiting for extent
conversion in some cases.
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Later we would like to clear PageWriteback bit only after extent
conversion from unwritten to written extents is performed. However it
is not possible to start a transaction after PageWriteback is set
because that violates lock ordering (and is easy to deadlock). So we
have to reserve a transaction before locking pages and sending them
for IO and later we use the transaction for extent conversion from
ext4_end_io().
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
There isn't any need for setting BH_Uninit on buffers anymore. It was
only used to signal we need to mark io_end as needing extent
conversion in add_bh_to_extent() but now we can mark the io_end
directly when mapping extent.
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
There are two issues with current writeback path in ext4. For one we
don't necessarily map complete pages when blocksize < pagesize and
thus needn't do any writeback in one iteration. We always map some
blocks though so we will eventually finish mapping the page. Just if
writeback races with other operations on the file, forward progress is
not really guaranteed. The second problem is that current code
structure makes it hard to associate all the bios to some range of
pages with one io_end structure so that unwritten extents can be
converted after all the bios are finished. This will be especially
difficult later when io_end will be associated with reserved
transaction handle.
We restructure the writeback path to a relatively simple loop which
first prepares extent of pages, then maps one or more extents so that
no page is partially mapped, and once page is fully mapped it is
submitted for IO. We keep all the mapping and IO submission
information in mpage_da_data structure to somewhat reduce stack usage.
Resulting code is somewhat shorter than the old one and hopefully also
easier to read.
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We limit the number of blocks written in a single loop of
ext4_da_writepages() to 64 when inode uses indirect blocks. That is
unnecessary as credit estimates for mapping logically continguous run
of blocks is rather low even for inode with indirect blocks. So just
lift this limitation and properly calculate the number of necessary
credits.
This better credit estimate will also later allow us to always write
at least a single page in one iteration.
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
ext4_ind_trans_blocks() wrongly used 'chunk' argument to decide whether
blocks mapped are logically contiguous. That is wrong since the argument
informs whether the blocks are physically contiguous. As the blocks
mapped are always logically contiguous and that's all
ext4_ind_trans_blocks() cares about, just remove the 'chunk' argument.
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Writeback code got better in how it submits IO and now the number of
pages requested to be written is usually higher than original 1024.
The number is now dynamically computed based on observed throughput
and is set to be about 0.5 s worth of writeback. E.g. on ordinary
SATA drive this ends up somewhere around 10000 as my testing shows.
So remove the unnecessary smarts from ext4_da_writepages().
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Change writeback path to create just one io_end structure for the
extent to which we submit IO and share it among bios writing that
extent. This prevents needless splitting and joining of unwritten
extents when they cannot be submitted as a single bio.
Bugs in ENOMEM handling found by Linux File System Verification project
(linuxtesting.org) and fixed by Alexey Khoroshilov
<khoroshilov@ispras.ru>.
CC: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The arithmetics adding delalloc blocks to the number of used blocks in
ext4_getattr() can easily overflow on 32-bit archs as we first multiply
number of blocks by blocksize and then divide back by 512. Make the
arithmetics more clever and also use proper type (unsigned long long
instead of unsigned long).
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The discard_partial_page_buffers is no longer used anywhere so we can
simply remove it including the *_no_lock variant and
EXT4_DISCARD_PARTIAL_PG_ZERO_UNMAPPED define.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We're doing to get rid of ext4_discard_partial_page_buffers() since it is
duplicating some code and also partially duplicating work of
truncate_pagecache_range(), moreover the old implementation was much
clearer.
Now when the truncate_inode_pages_range() can handle truncating non page
aligned regions we can use this to invalidate and zero out block aligned
region of the punched out range and then use ext4_block_truncate_page()
to zero the unaligned blocks on the start and end of the range. This
will greatly simplify the punch hole code. Moreover after this commit we
can get rid of the ext4_discard_partial_page_buffers() completely.
We also introduce function ext4_prepare_punch_hole() to do come common
operations before we attempt to do the actual punch hole on
indirect or extent file which saves us some code duplication.
This has been tested on ppc64 with 1k block size with fsx and xfstests
without any problems.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This reverts commit 189e868fa8.
This commit reintroduces the use of ext4_block_truncate_page() in ext4
truncate operation instead of ext4_discard_partial_page_buffers().
The statement in the commit description that the truncate operation only
zero block unaligned portion of the last page is not exactly right,
since truncate_pagecache_range() also zeroes and invalidate the unaligned
portion of the page. Then there is no need to zero and unmap it once more
and ext4_block_truncate_page() was doing the right job, although we
still need to update the buffer head containing the last block, which is
exactly what ext4_block_truncate_page() is doing.
Moreover the problem described in the commit is fixed more properly with
commit
15291164b2
jbd2: clear BH_Delay & BH_Unwritten in journal_unmap_buffer
This was tested on ppc64 machine with block size of 1024 bytes without
any problems.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In data=ordered mode we should call ext4_jbd2_file_inode() so that crash
after the truncate transaction has committed does not expose stall data
in the tail of the block.
Thanks Jan Kara for pointing that out.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This reverts commit ccb4d7af91.
This commit reintroduces functions ext4_block_truncate_page() and
ext4_block_zero_page_range() which has been previously removed in favour
of ext4_discard_partial_page_buffers().
In future commits we want to reintroduce those function and remove
ext4_discard_partial_page_buffers() since it is duplicating some code
and also partially duplicating work of truncate_pagecache_range(),
moreover the old implementation was much clearer.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
->invalidatepage() aop now accepts range to invalidate so we can make
use of it in all ext4 invalidatepage routines.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
invalidatepage now accepts range to invalidate and there are two file
system using jbd2 also implementing punch hole feature which can benefit
from this. We need to implement the same thing for jbd2 layer in order to
allow those file system take benefit of this functionality.
This commit adds length argument to the jbd2_journal_invalidatepage()
and updates all instances in ext4 and ocfs2.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Currently there is no way to truncate partial page where the end
truncate point is not at the end of the page. This is because it was not
needed and the functionality was enough for file system truncate
operation to work properly. However more file systems now support punch
hole feature and it can benefit from mm supporting truncating page just
up to the certain point.
Specifically, with this functionality truncate_inode_pages_range() can
be changed so it supports truncating partial page at the end of the
range (currently it will BUG_ON() if 'end' is not at the end of the
page).
This commit changes the invalidatepage() address space operation
prototype to accept range to be invalidated and update all the instances
for it.
We also change the block_invalidatepage() in the same way and actually
make a use of the new length argument implementing range invalidation.
Actual file system implementations will follow except the file systems
where the changes are really simple and should not change the behaviour
in any way .Implementation for truncate_page_range() which will be able
to accept page unaligned ranges will follow as well.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Hugh Dickins <hughd@google.com>
regression) introduced during the 3.10-rc1 merge window. Also
included is a bug fix relating to allocating blocks after resizing an
ext3 file system when using the ext4 file system driver.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=6cRD
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 update from Ted Ts'o:
"Fixed regressions (two stability regressions and a performance
regression) introduced during the 3.10-rc1 merge window.
Also included is a bug fix relating to allocating blocks after
resizing an ext3 file system when using the ext4 file system driver"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
jbd,jbd2: fix oops in jbd2_journal_put_journal_head()
ext4: revert "ext4: use io_end for multiple bios"
ext4: limit group search loop for non-extent files
ext4: fix fio regression
This reverts commit 4eec708d26.
Multiple users have reported crashes which is apparently caused by
this commit. Thanks to Dmitry Monakhov for bisecting it.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Dmitry Monakhov <dmonakhov@openvz.org>
Cc: Jan Kara <jack@suse.cz>
Andreas Dilger