The kernel's default behaviour is to obstruct the allocation of high
virtual address as it handles memory overcommit in a heuristic manner.
Setting the parameter as OVERCOMMIT_ALWAYS, ensures kernel isn't
susceptible to the availability of a platform's physical memory when
denying a memory allocation request.
Link: https://lkml.kernel.org/r/20230323060121.1175830-4-chaitanyas.prakash@arm.com
Signed-off-by: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Although there is a provision for 52 bit VA on arm64 platform, it remains
unutilised and higher addresses are not allocated. In order to
accommodate 4PB [2^52] virtual address space where supported,
NR_CHUNKS_HIGH is changed accordingly.
Array holding addresses is changed from static allocation to dynamic
allocation to accommodate its voluminous nature which otherwise might
overflow the stack.
Link: https://lkml.kernel.org/r/20230323060121.1175830-3-chaitanyas.prakash@arm.com
Signed-off-by: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "selftests: Fix virtual address range for arm64", v2.
When the virtual address range selftest is run on arm64 and x86 platforms,
it is observed that both the low and high VA range iterations are skipped
when the MAP_CHUNK_SIZE is set to 16GB. The MAP_CHUNK_SIZE is changed to
1GB to resolve this issue, following which support for arm64 platform is
added by changing the NR_CHUNKS_HIGH for aarch64 to accommodate up to 4PB
of virtual address space allocation requests. Dynamic memory allocation
of array holding addresses is introduced to prevent overflow of the stack.
Finally, the overcommit_policy is set as OVERCOMMIT_ALWAYS to prevent the
kernel from denying a memory allocation request based on a platform's
physical memory availability.
This patch (of 3):
mmap() fails to allocate 16GB virtual space chunk, skipping both low and
high VA range iterations. Hence, reduce MAP_CHUNK_SIZE to 1GB and update
relevant macros as required.
Link: https://lkml.kernel.org/r/20230323060121.1175830-1-chaitanyas.prakash@arm.com
Link: https://lkml.kernel.org/r/20230323060121.1175830-2-chaitanyas.prakash@arm.com
Signed-off-by: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
After commit cb6c33d4dc ("cma: tracing: print alloc result in
trace_cma_alloc_finish"), cma_alloc_class has only one event which is
cma_alloc_busy_retry. So we can remove the cma_alloc_class.
Link: https://lkml.kernel.org/r/20230323114136.177677-1-haowenchao2@huawei.com
Signed-off-by: Wenchao Hao <haowenchao2@huawei.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Feilong Lin <linfeilong@huawei.com>
Cc: Hongxiang Lou <louhongxiang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Turn a pr_info() into a pr_debug() to prevent dmesg spamming on systems
where memory hotplug is a frequent operation.
Link: https://lkml.kernel.org/r/20230323174349.35990-1-krckatom@amazon.de
Signed-off-by: Tomas Krcka <krckatom@amazon.de>
Suggested-by: Jan H. Schönherr <jschoenh@amazon.de>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Rather than setting err = -1 and only resetting if we hit merge cases,
explicitly check the non-mergeable case to make it abundantly clear that
we only proceed with the rest if something is mergeable, default err to 0
and only update if an error might occur.
Move the merge_prev, merge_next cases closer to the logic determining
curr, next and reorder initial variables so they are more logically
grouped.
This has no functional impact.
Link: https://lkml.kernel.org/r/99259fbc6403e80e270e1cc4612abbc8620b121b.1679516210.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vernon Yang <vernon2gm@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Previously, vma was an uninitialised variable which was only definitely
assigned as a result of the logic covering all possible input cases - for
it to have remained uninitialised, prev would have to be NULL, and next
would _have_ to be mergeable.
The value of res defaults to NULL, so we can neatly eliminate the
assignment to res and vma in the if (prev) block and ensure that both res
and vma are both explicitly assigned, by just setting both to prev.
In addition we add an explanation as to under what circumstances both
might change, and since we absolutely do rely on addr == curr->vm_start
should curr exist, assert that this is the case.
Link: https://lkml.kernel.org/r/83938bed24422cbe5954bbf491341674becfe567.1679516210.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vernon Yang <vernon2gm@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use find_vma_intersection() and vma_lookup() to both simplify the logic
and to fold the end == next->vm_start condition into one block.
This groups all of the simple range checks together and establishes the
invariant that, if prev, curr or next are non-NULL then their positions
are as expected.
This has no functional impact.
Link: https://lkml.kernel.org/r/c6d960641b4ba58fa6ad3d07bf68c27d847963c8.1679516210.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vernon Yang <vernon2gm@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "further cleanup of vma_merge()", v2.
Following on from Vlastimil Babka's patch series "cleanup vma_merge() and
improve mergeability tests" which was in turn based on Liam's prior
cleanups, this patch series introduces changes discussed in review of
Vlastimil's series and goes further in attempting to make the logic as
clear as possible.
Nearly all of this should have absolutely no functional impact, however it
does add a singular VM_WARN_ON() case.
With many thanks to Vernon for helping kick start the discussion around
simplification - abstract use of vma did indeed turn out not to be
necessary - and to Liam for his excellent suggestions which greatly
simplified things.
This patch (of 4):
Previously the ASCII diagram above vma_merge() and the accompanying
variable naming was rather confusing, however recent efforts by Liam
Howlett and Vlastimil Babka have significantly improved matters.
This patch goes a little further - replacing 'X' with 'N' which feels a
lot more natural and replacing what was 'N' with 'C' which stands for
'concurrent' VMA.
No word quite describes a VMA that has coincident start as the input span,
concurrent, abbreviated to 'curr' (and which can be thought of also as
'current') however fits intuitions well alongside prev and next.
This has no functional impact.
Link: https://lkml.kernel.org/r/cover.1679431180.git.lstoakes@gmail.com
Link: https://lkml.kernel.org/r/6001e08fa7e119470cbb1d2b6275ad8d742ff9a7.1679431180.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vernon Yang <vernon2gm@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Having previously laid the foundation for converting vread() to an
iterator function, pull the trigger and do so.
This patch attempts to provide minimal refactoring and to reflect the
existing logic as best we can, for example we continue to zero portions of
memory not read, as before.
Overall, there should be no functional difference other than a performance
improvement in /proc/kcore access to vmalloc regions.
Now we have eliminated the need for a bounce buffer in read_kcore_iter(),
we dispense with it, and try to write to user memory optimistically but
with faults disabled via copy_page_to_iter_nofault(). We already have
preemption disabled by holding a spin lock. We continue faulting in until
the operation is complete.
Additionally, we must account for the fact that at any point a copy may
fail (most likely due to a fault not being able to occur), we exit
indicating fewer bytes retrieved than expected.
[sfr@canb.auug.org.au: fix sparc64 warning]
Link: https://lkml.kernel.org/r/20230320144721.663280c3@canb.auug.org.au
[lstoakes@gmail.com: redo Stephen's sparc build fix]
Link: https://lkml.kernel.org/r/8506cbc667c39205e65a323f750ff9c11a463798.1679566220.git.lstoakes@gmail.com
[akpm@linux-foundation.org: unbreak uio.h includes]
Link: https://lkml.kernel.org/r/941f88bc5ab928e6656e1e2593b91bf0f8c81e1b.1679511146.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Provide a means to copy a page to user space from an iterator, aborting if
a page fault would occur. This supports compound pages, but may be passed
a tail page with an offset extending further into the compound page, so we
cannot pass a folio.
This allows for this function to be called from atomic context and _try_
to user pages if they are faulted in, aborting if not.
The function does not use _copy_to_iter() in order to not specify
might_fault(), this is similar to copy_page_from_iter_atomic().
This is being added in order that an iteratable form of vread() can be
implemented while holding spinlocks.
Link: https://lkml.kernel.org/r/19734729defb0f498a76bdec1bef3ac48a3af3e8.1679511146.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
For the time being we still use a bounce buffer for vread(), however in
the next patch we will convert this to interact directly with the iterator
and eliminate the bounce buffer altogether.
Link: https://lkml.kernel.org/r/ebe12c8d70eebd71f487d80095605f3ad0d1489c.1679511146.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "convert read_kcore(), vread() to use iterators", v8.
While reviewing Baoquan's recent changes to permit vread() access to
vm_map_ram regions of vmalloc allocations, Willy pointed out [1] that it
would be nice to refactor vread() as a whole, since its only user is
read_kcore() and the existing form of vread() necessitates the use of a
bounce buffer.
This patch series does exactly that, as well as adjusting how we read the
kernel text section to avoid the use of a bounce buffer in this case as
well.
This has been tested against the test case which motivated Baoquan's
changes in the first place [2] which continues to function correctly, as
do the vmalloc self tests.
This patch (of 4):
Commit df04abfd18 ("fs/proc/kcore.c: Add bounce buffer for ktext data")
introduced the use of a bounce buffer to retrieve kernel text data for
/proc/kcore in order to avoid failures arising from hardened user copies
enabled by CONFIG_HARDENED_USERCOPY in check_kernel_text_object().
We can avoid doing this if instead of copy_to_user() we use
_copy_to_user() which bypasses the hardening check. This is more
efficient than using a bounce buffer and simplifies the code.
We do so as part an overall effort to eliminate bounce buffer usage in the
function with an eye to converting it an iterator read.
Link: https://lkml.kernel.org/r/cover.1679566220.git.lstoakes@gmail.com
Link: https://lore.kernel.org/all/Y8WfDSRkc%2FOHP3oD@casper.infradead.org/ [1]
Link: https://lore.kernel.org/all/87ilk6gos2.fsf@oracle.com/T/#u [2]
Link: https://lkml.kernel.org/r/fd39b0bfa7edc76d360def7d034baaee71d90158.1679511146.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Normal page init path frees pages during the boot in MAX_ORDER chunks, but
deferred page init path does it in pageblock blocks.
Change deferred page init path to work in MAX_ORDER blocks.
For cases when MAX_ORDER is larger than pageblock, set migrate type to
MIGRATE_MOVABLE for all pageblocks covered by the page.
Link: https://lkml.kernel.org/r/20230321002415.20843-1-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This function no longer exists, however the prot != vma->vm_page_prot case
discussion has been retained and moved to vmf_insert_pfn_prot() so refer
to this instead.
Link: https://lkml.kernel.org/r/db403b3622b94a87bd93528cc1d6b44ae88adcdd.1678661628.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Aaron Tomlin <atomlin@atomlin.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: "Russell King (Oracle)" <linux@armlinux.org.uk>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This functionality's sole user, the drm ttm module, removed support for it
in commit 0d97950953 ("drm/ttm: remove ttm_bo_vm_insert_huge()") as the
whole approach is currently unworkable without a PMD/PUD special bit and
updates to GUP.
Link: https://lkml.kernel.org/r/604c2ad79659d4b8a6e3e1611c6219d5d3233988.1678661628.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Aaron Tomlin <atomlin@atomlin.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: "Russell King (Oracle)" <linux@armlinux.org.uk>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Remove drm/ttm-specific mm changes".
Functionality was added specifically for the DRM TTM driver to support
mapping memory for VM_MIXEDMAP VMAs with customised protection flags,
however this has now been rolled back as issues were found with this
approach.
This series removes the mm changes too, retaining some of the useful
comments.
This patch (of 3):
The sole user of vmf_insert_mixed_prot(), the drm ttm module, stopped
using this in commit f91142c621 ("drm/ttm: nuke VM_MIXEDMAP on BO
mappings v3") citing use of VM_MIXEDMAP in this case being terribly
broken.
Remove this now-dead code and references to it, but retain the useful
description of the prot != vma->vm_page_prot case, moving it to
vmf_insert_pfn_prot() instead.
Link: https://lkml.kernel.org/r/cover.1678661628.git.lstoakes@gmail.com
Link: https://lkml.kernel.org/r/a069644388e6f1593a7020d15840e6fc9f39bcaf.1678661628.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Aaron Tomlin <atomlin@atomlin.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: "Russell King (Oracle)" <linux@armlinux.org.uk>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently the memtest results were only presented in dmesg.
When running a large fleet of devices without ECC RAM it's currently not
easy to do bulk monitoring for memory corruption. You have to parse
dmesg, but that's a ring buffer so the error might disappear after some
time. In general I do not consider dmesg to be a great API to query RAM
status.
In several companies I've seen such errors remain undetected and cause
issues for way too long. So I think it makes sense to provide a
monitoring API, so that we can safely detect and act upon them.
This adds /proc/meminfo entry which can be easily used by scripts.
Link: https://lkml.kernel.org/r/20230321103430.7130-1-tomas.mudrunka@gmail.com
Signed-off-by: Tomas Mudrunka <tomas.mudrunka@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
vmalloc_init() is called only from mm_core_init(), there is no need to
declare it in include/linux/vmalloc.h
Move vmalloc_init() declaration to mm/internal.h
Link: https://lkml.kernel.org/r/20230321170513.2401534-14-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
kmem_cache_init() is called only from mm_core_init(), there is no need to
declare it in include/linux/slab.h
Move kmem_cache_init() declaration to mm/slab.h
Link: https://lkml.kernel.org/r/20230321170513.2401534-13-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mem_init_print_info() is only called from mm_core_init().
Move it close to the caller and make it static.
Link: https://lkml.kernel.org/r/20230321170513.2401534-12-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When deferred initialization of struct pages is enabled, page_ext_init()
must be called after all the deferred initialization is done, but there is
no point to keep it a separate call from kernel_init_freeable() right
after page_alloc_init_late().
Fold the call to page_ext_init() into page_alloc_init_late() and localize
deferred_struct_pages variable.
Link: https://lkml.kernel.org/r/20230321170513.2401534-11-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
init_mem_debugging_and_hardening() is only called from mm_core_init().
Move it close to the caller, make it static and rename it to
mem_debugging_and_hardening_init() for consistency with surrounding
convention.
Link: https://lkml.kernel.org/r/20230321170513.2401534-10-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
and drop pgtable_init() as it has no real value and its name is
misleading.
Link: https://lkml.kernel.org/r/20230321170513.2401534-9-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Make mm_init() a part of mm/ codebase. mm_core_init() better describes
what the function does and does not clash with mm_init() in kernel/fork.c
Link: https://lkml.kernel.org/r/20230321170513.2401534-8-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Both build_all_zonelists() and page_alloc_init_cpuhp() must be called
after SMP setup is complete but before the page allocator is set up.
Still, they both are a part of memory management initialization, so move
them to mm_init().
Link: https://lkml.kernel.org/r/20230321170513.2401534-7-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The page_alloc_init() name is really misleading because all this function
does is sets up CPU hotplug callbacks for the page allocator.
Rename it to page_alloc_init_cpuhp() so that name will reflect what the
function does.
Link: https://lkml.kernel.org/r/20230321170513.2401534-6-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The hashdist variable must be initialized before the first call to
alloc_large_system_hash() and free_area_init() looks like a better place
for it than page_alloc_init().
Move hashdist handling to mm/mm_init.c
Link: https://lkml.kernel.org/r/20230321170513.2401534-5-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The bulk of memory management initialization code is spread all over
mm/page_alloc.c and makes navigating through page allocator functionality
difficult.
Move most of the functions marked __init and __meminit to mm/mm_init.c to
make it better localized and allow some more spare room before
mm/page_alloc.c reaches 10k lines.
No functional changes.
Link: https://lkml.kernel.org/r/20230321170513.2401534-4-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Instead of duplicating long static_branch_enabled(&check_pages_enabled)
wrap it in a helper function is_check_pages_enabled()
Link: https://lkml.kernel.org/r/20230321170513.2401534-3-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: move core MM initialization to mm/mm_init.c", v2.
This set moves most of the core MM initialization to mm/mm_init.c.
This largely includes free_area_init() and its helpers, functions used at
boot time, mm_init() from init/main.c and some of the functions it calls.
Aside from gaining some more space before mm/page_alloc.c hits 10k lines,
this makes mm/page_alloc.c to be mostly about buddy allocator and moves
the init code out of the way, which IMO improves maintainability.
Besides, this allows to move a couple of declarations out of include/linux
and make them private to mm/.
And as an added bonus there a slight decrease in vmlinux size. For
tinyconfig and defconfig on x86 I've got
tinyconfig:
text data bss dec hex filename
853206 289376 1200128 2342710 23bf36 a/vmlinux
853198 289344 1200128 2342670 23bf0e b/vmlinux
defconfig:
text data bss dec hex filename
26152959 9730634 2170884 38054477 244aa4d a/vmlinux
26152945 9730602 2170884 38054431 244aa1f b/vmlinux
This patch (of 14):
Comment about fixrange_init() says that its called from pgtable_init()
while the actual caller is pagetabe_init().
Update comment to match the code.
Link: https://lkml.kernel.org/r/20230321170513.2401534-1-rppt@kernel.org
Link: https://lkml.kernel.org/r/20230321170513.2401534-2-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Philippe Mathieu-Daud <philmd@linaro.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
I have recently been involved in both reviewing and submitting patches to
the vmalloc code in mm and would be willing and happy to help out with
review going forward if it would be helpful!
Link: https://lkml.kernel.org/r/55f663af6100c84a71a0065ac0ed22463aa340de.1679421959.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The get_page_from_free_area() helper is only used in mm/page_alloc.c so
move it there to reduce noise in include/linux/mmzone.h
Link: https://lkml.kernel.org/r/20230319114214.2133332-1-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
All use of this value is now at page granularity, so specify the variable
as such too. This simplifies the logic.
We maintain the debugfs entry to ensure that there are no user-visible
changes.
Link: https://lkml.kernel.org/r/4995bad07fe9baa51c786fa0d81819dddfb57654.1679089214.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Refactor do_fault_around()"
Refactor do_fault_around() to avoid bitwise tricks and rather difficult to
follow logic. Additionally, prefer fault_around_pages to
fault_around_bytes as the operations are performed at a base page
granularity.
This patch (of 2):
The existing logic is confusing and fails to abstract a number of bitwise
tricks.
Use ALIGN_DOWN() to perform alignment, pte_index() to obtain a PTE index
and represent the address range using PTE offsets, which naturally make it
clear that the operation is intended to occur within only a single PTE and
prevent spanning of more than one page table.
We rely on the fact that fault_around_bytes will always be page-aligned,
at least one page in size, a power of two and that it will not exceed
PAGE_SIZE * PTRS_PER_PTE in size (i.e. the address space mapped by a
PTE). These are all guaranteed by fault_around_bytes_set().
Link: https://lkml.kernel.org/r/cover.1679089214.git.lstoakes@gmail.com
Link: https://lkml.kernel.org/r/d125db1c3665a63b80cea29d56407825482e2262.1679089214.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When trying to isolate a migratable pageblock, it can contain several
normal pages or several hugetlb pages (e.g. CONT-PTE 64K hugetlb on arm64)
in a pageblock. That means we may hold the lru lock of a normal page to
continue to isolate the next hugetlb page by isolate_or_dissolve_huge_page()
in the same migratable pageblock.
However in the isolate_or_dissolve_huge_page(), it may allocate a new hugetlb
page and dissolve the old one by alloc_and_dissolve_hugetlb_folio() if the
hugetlb's refcount is zero. That means we can still enter the direct compaction
path to allocate a new hugetlb page under the current lru lock, which
may cause possible deadlock.
To avoid this possible deadlock, we should release the lru lock when
trying to isolate a hugetbl page. Moreover it does not make sense to take
the lru lock to isolate a hugetlb, which is not in the lru list.
Link: https://lkml.kernel.org/r/7ab3bffebe59fb419234a68dec1e4572a2518563.1678962352.git.baolin.wang@linux.alibaba.com
Fixes: 369fa227c2 ("mm: make alloc_contig_range handle free hugetlb pages")
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: William Lam <william.lam@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
commit b717d6b93b ("mm: compaction: include compound page count for
scanning in pageblock isolation") added compound page statistics for
scanning in pageblock isolation, to make sure the number of scanned pages
is always larger than the number of isolated pages when isolating
mirgratable or free pageblock.
However, when failing to isolate the pages when scanning the migratable or
free pageblocks, the isolation failure path did not consider the scanning
statistics of the compound pages, which result in showing the incorrect
number of scanned pages in tracepoints or in vmstats which will confuse
people about the page scanning pressure in memory compaction.
Thus we should take into account the number of scanning pages when failing
to isolate the compound pages to make the statistics accurate.
Link: https://lkml.kernel.org/r/73d6250a90707649cc010731aedc27f946d722ed.1678962352.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: William Lam <william.lam@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This effectively reverts d014cd7c1c ("mm, mremap: fix mremap() expanding
for vma's with vm_ops->close()"). After the recent changes, vma_merge()
is able to handle the expansion properly even when the vma being expanded
has a vm_ops->close operation, so we don't need to special case it
anymore.
Link: https://lkml.kernel.org/r/20230309111258.24079-11-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since pre-git times, is_mergeable_vma() returns false for a vma with
vm_ops->close, so that no owner assumptions are violated in case the vma
is removed as part of the merge.
This check is currently very conservative and can prevent merging even
situations where vma can't be removed, such as simple expansion of
previous vma, as evidenced by commit d014cd7c1c ("mm, mremap: fix
mremap() expanding for vma's with vm_ops->close()")
In order to allow more merging when appropriate and simplify the code that
was made more complex by commit d014cd7c1c, start distinguishing cases
where the vma can be really removed, and allow merging with vm_ops->close
otherwise.
As a first step, add a may_remove_vma parameter to is_mergeable_vma().
can_vma_merge_before() sets it to true, because when called from
vma_merge(), a removal of the vma is possible.
In can_vma_merge_after(), pass the parameter as false, because no
removal can occur in each of its callers:
- vma_merge() calls it on the 'prev' vma, which is never removed
- mmap_region() and do_brk_flags() call it to determine if it can expand
a vma, which is not removed
As a result, vma's with vm_ops->close may now merge with compatible ranges
in more situations than previously. We can also revert commit
d014cd7c1c as the next step to simplify mremap code again.
[vbabka@suse.cz: adjust comment as suggested by Lorenzo]
Link: https://lkml.kernel.org/r/74f2ea6c-f1a9-6dd7-260c-25e660f42379@suse.cz
Link: https://lkml.kernel.org/r/20230309111258.24079-10-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The comments already mention returning 'true' so make the code match them.
Link: https://lkml.kernel.org/r/20230309111258.24079-9-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The variable 'adj_next' holds the value by which we adjust vm_start of a
vma in variable 'adjust', that's either 'next' or 'mid', so the current
name is inaccurate. Rename it to 'adj_start'.
Link: https://lkml.kernel.org/r/20230309111258.24079-8-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There are several places where we test if 'mid' is really the area NNNN in
the diagram and the tests have two variants and are non-obvious to follow.
Instead, set 'mid' to NULL up-front if it's not the NNNN area, and
simplify the tests.
Also update the description in comment accordingly.
[vbabka@suse.cz: adjust/add comments as suggested by Lorenzo]
Link: https://lkml.kernel.org/r/def43190-53f7-a607-d1b0-b657565f4288@suse.cz
Link: https://lkml.kernel.org/r/20230309111258.24079-7-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It is more intuitive to go from prev to mid and then next. No functional
change.
Link: https://lkml.kernel.org/r/20230309111258.24079-6-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Almost all cases now use the 'next' pointer for the vma following the
merged area, and the cases diagram shows it as XXXX. Case 4 is different
as it uses 'mid' and NNNN, so change it for consistency. No functional
change.
Link: https://lkml.kernel.org/r/20230309111258.24079-5-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Case 1 is now shown in the comment as next vma being merged with prev, so
use 'next' instead of 'mid'. In case 1 they both point to the same vma.
As a consequence, in case 6, the dup_anon_vma() is now tried first on
'next' and then on 'mid', before it was the opposite order. This is not a
functional change, as those two vma's cannnot have a different anon_vma,
as that would have prevented the merging in the first place.
Link: https://lkml.kernel.org/r/20230309111258.24079-4-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In case 3 we we use 'next' for everything but vma_pgoff. So use 'next'
for that as well, instead of 'mid', for consistency. Then in case 8 we
have to use 'mid' explicitly, which should also make the intent more
obvious.
Adjust the diagram for cases 1-3 in the comment to match the code - we are
using 'next' for case 3 so mark the range with XXXX instead of NNNN. For
case 2 that's a no-op as the code doesn't touch 'next' or 'mid'. For case
1 it's now wrong but that will be fixed next.
No functional change.
Link: https://lkml.kernel.org/r/20230309111258.24079-3-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "cleanup vma_merge() and improve mergeability tests".
My initial goal here was to try making the check for vm_ops->close in
is_mergeable_vma() only be applied for vma's that would be truly removed
as part of the merge (see Patch 9). This would then allow reverting the
quick fix d014cd7c1c ("mm, mremap: fix mremap() expanding for vma's with
vm_ops->close()"). This was successful enough to allow the revert (Patch
10). Checks using can_vma_merge_before() are still pessimistic about
possible vma removal, and making them precise would probably complicate
the vma_merge() code too much.
Liam's 6.3-rc1 simplification of vma_merge() and removal of __vma_adjust()
was very much helpful in understanding the vma_merge() implementation and
especially when vma removals can happen, which is now very obvious. While
studing the code, I've found ways to make it hopefully even more easy to
follow, so that's the patches 1-8. That made me also notice a bug that's
now already fixed in 6.3-rc1.
This patch (of 10):
In the merging preparation part of vma_merge(), some vma pointer variables
are assigned for later execution of the merge, but also read from in the
block itself. The code is easier follow and check against the cases
diagram in the comment if the code reads only from the "primary" vma
variables prev, mid, next instead. No functional change.
Link: https://lkml.kernel.org/r/20230309111258.24079-1-vbabka@suse.cz
Link: https://lkml.kernel.org/r/20230309111258.24079-2-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>]
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
UFFDIO_COPY already has UFFDIO_COPY_MODE_WP, so when installing a new PTE
to resolve a missing fault, one can install a write-protected one. This
is useful when using UFFDIO_REGISTER_MODE_{MISSING,WP} in combination.
This was motivated by testing HugeTLB HGM [1], and in particular its
interaction with userfaultfd features. Existing userfaultfd code supports
using WP and MINOR modes together (i.e. you can register an area with
both enabled), but without this CONTINUE flag the combination is in
practice unusable.
So, add an analogous UFFDIO_CONTINUE_MODE_WP, which does the same thing as
UFFDIO_COPY_MODE_WP, but for *minor* faults.
Update the selftest to do some very basic exercising of the new flag.
Update Documentation/ to describe how these flags are used (neither the
COPY nor the new CONTINUE versions of this mode flag were described there
before).
[1]: https://patchwork.kernel.org/project/linux-mm/cover/20230218002819.1486479-1-jthoughton@google.com/
Link: https://lkml.kernel.org/r/20230314221250.682452-5-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Many userfaultfd ioctl functions take both a 'mode' and a 'wp_copy'
argument. In future commits we plan to plumb the flags through to more
places, so we'd be proliferating the very long argument list even further.
Let's take the time to simplify the argument list. Combine the two
arguments into one - and generalize, so when we add more flags in the
future, it doesn't imply more function arguments.
Since the modes (copy, zeropage, continue) are mutually exclusive, store
them as an integer value (0, 1, 2) in the low bits. Place combine-able
flag bits in the high bits.
This is quite similar to an earlier patch proposed by Nadav Amit
("userfaultfd: introduce uffd_flags" [1]). The main difference is that
patch only handled flags, whereas this patch *also* combines the "mode"
argument into the same type to shorten the argument list.
[1]: https://lore.kernel.org/all/20220619233449.181323-2-namit@vmware.com/
Link: https://lkml.kernel.org/r/20230314221250.682452-4-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Acked-by: James Houghton <jthoughton@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Chaitanya S Prakash