Commit Graph

495 Commits

Author SHA1 Message Date
Vitaliy Ivanov fb914ebff5 treewide: typo 'interrrupt' word corrections.
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Vitaliy Ivanov <vitalivanov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-09-15 14:13:02 +02:00
Hans Petter Selasky de76cc2ba2 musb_gadget: Fix for spurious interrupts on endpoint zero.
There is a multi-year old bug in the MUSB hardware which is not documented.
It causes spurious interrupts and have various symptoms, like endless
"SetupEnd came in a wrong ep0stage" messages. The fix is taken from the
FreeBSD's musb driver.

How to reproduce:
For example issue clear-stall on a couple of endpoints very fast,
like one request per 125us. After a while the bug triggers and the
musb-chip becomes unusable until next re-enumeration.

Signed-off-by: Hans Petter Selasky <hps@bitfrost.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-09 15:58:02 -07:00
Anand Gadiyar 0ae52d5458 usb: musb: Enable DMA mode1 RX for transfers without short packets
This patch enables DMA mode1 for the RX path when we know
there won't be any short packets. We check that by looking
into the short_no_ok flag, if it's true we enable mode1, otherwise
we use mode0 to transfer the data.

This will result in a throughput performance gain of around
40% for USB mass-storage/mtp use cases.

[ balbi@ti.com : updated commit log and code comments slightly ]

Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Moiz Sonasath <m-sonasath@ti.com>
Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Tested-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-09-09 13:08:17 +03:00
Greg Kroah-Hartman 6ed962a208 Merge 3.1-rc4 into usb-next
This was done to resolve a conflict in this file:
	drivers/usb/host/xhci-ring.c

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-29 08:56:17 -07:00
Kuninori Morimoto 29cc88979a USB: use usb_endpoint_maxp() instead of le16_to_cpu()
Now ${LINUX}/drivers/usb/* can use usb_endpoint_maxp(desc) to get maximum packet size
instead of le16_to_cpu(desc->wMaxPacketSize).
This patch fix it up

Cc: Armin Fuerst <fuerst@in.tum.de>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Johannes Erdfelt <johannes@erdfelt.com>
Cc: Vojtech Pavlik <vojtech@suse.cz>
Cc: Oliver Neukum <oliver@neukum.name>
Cc: David Kubicek <dave@awk.cz>
Cc: Johan Hovold <jhovold@gmail.com>
Cc: Brad Hards <bhards@bigpond.net.au>
Acked-by: Felipe Balbi <balbi@ti.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Dahlmann <dahlmann.thomas@arcor.de>
Cc: David Brownell <david-b@pacbell.net>
Cc: David Lopo <dlopo@chipidea.mips.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Michal Nazarewicz <m.nazarewicz@samsung.com>
Cc: Xie Xiaobo <X.Xie@freescale.com>
Cc: Li Yang <leoli@freescale.com>
Cc: Jiang Bo <tanya.jiang@freescale.com>
Cc: Yuan-hsin Chen <yhchen@faraday-tech.com>
Cc: Darius Augulis <augulis.darius@gmail.com>
Cc: Xiaochen Shen <xiaochen.shen@intel.com>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: OKI SEMICONDUCTOR, <toshiharu-linux@dsn.okisemi.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Ben Dooks <ben@simtec.co.uk>
Cc: Thomas Abraham <thomas.ab@samsung.com>
Cc: Herbert Pötzl <herbert@13thfloor.at>
Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
Cc: Roman Weissgaerber <weissg@vienna.at>
Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Tony Olech <tony.olech@elandigitalsystems.com>
Cc: Florian Floe Echtler <echtler@fs.tum.de>
Cc: Christian Lucht <lucht@codemercs.com>
Cc: Juergen Stuber <starblue@sourceforge.net>
Cc: Georges Toth <g.toth@e-biz.lu>
Cc: Bill Ryder <bryder@sgi.com>
Cc: Kuba Ober <kuba@mareimbrium.org>
Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23 09:47:40 -07:00
Sebastian Andrzej Siewior 6193d6997c usb: musb: gadget: fix error path
In case one "forgot" to load the receiver i.e. doing
|modprobe omap2430
|modprobe musb_hdrc

he ends up with:

|musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
|HS USB OTG: no transceiver configured
|musb-hdrc musb-hdrc: musb_init_controller failed with status -19
|(NULL device *): gadget not registered.
|Unable to handle kernel NULL pointer dereference at virtual address 0000001c
|Internal error: Oops: 17 [] SMP
|[<c011383c>] (sysfs_find_dirent+0x4/0x60) from [<c01138c0>] (sysfs_get_dirent+0x28/0x78)
|[<c01138c0>] (sysfs_get_dirent+0x28/0x78) from [<c0115b78>] (sysfs_unmerge_group+0x1c/0x90)
|[<c0115b78>] (sysfs_unmerge_group+0x1c/0x90) from [<c0179ba4>] (dpm_sysfs_remove+0x14/0x3c)
|[<c0179ba4>] (dpm_sysfs_remove+0x14/0x3c) from [<c01742f8>] (device_del+0x40/0x1b4)
|[<c01742f8>] (device_del+0x40/0x1b4) from [<c0174478>] (device_unregister+0xc/0x18)
|[<c0174478>] (device_unregister+0xc/0x18) from [<bf0489b4>] (musb_free+0x24/0x88 [musb_hdrc])
|[<bf0489b4>] (musb_free+0x24/0x88 [musb_hdrc]) from [<bf057d18>] (musb_probe+0xb50/0xe3c [musb_hdrc])
|[<bf057d18>] (musb_probe+0xb50/0xe3c [musb_hdrc]) from [<c01779c4>] (platform_drv_probe+0x1c/0x24)

The problem is that musb_free() tries to figure out what was
initializued and what wasn't and clean up only the initialized part.
This works well for usb_del_gadget_udc() but device_unregister() can't
deal with it. Therefore we rely on the fact the we always have a parent
device and only then remove the device.
I broke this in 0f91349 ("usb: gadget: convert all users to the new udc
infrastructure")

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-12 12:06:34 +03:00
Bob Liu ad50c1b20f usb: musb: blackfin: include prefetch head file
After the prefetch/list.h restructure, drivers need to explicitly include
linux/prefetch.h in order to use the prefetch() function.  Otherwise, the
current driver fails to build:
drivers/usb/musb/blackfin.c: In function 'musb_write_fifo':
drivers/usb/musb/blackfin.c:43: error: implicit declaration of function
'prefetch'

Signed-off-by: Bob Liu <lliubbo@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-12 11:52:51 +03:00
Felipe Balbi 240a16e2cd usb: musb: tusb6010: fix compilation
earlier commits have broken compilation of
tusb6010 glue layer, fix it.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-12 11:52:50 +03:00
Per Forlin f847a79ab3 usb: musb: cppi: fix build errors due to DBG and missing musb variable
Replace DBG with dev_dbg and fix invalid access of musb->controller.
With this patch cppi_dma builds successfully.

Cc: <stable@kernel.org>
Signed-off-by: Per Forlin <per.forlin@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-12 11:52:47 +03:00
Per Forlin afbd0749c0 usb: musb: ux500: replace missing DBG with dev_dbg
ux500_dma.c fail to compile becase DBG has been removed from musb_debug.
Use dev_dbg for all prints.

Cc: stable@vger.kernel.org
Signed-off-by: Per Forlin <per.forlin@linaro.org>
Acked-by: Mian Yousaf Kaukab<mian.yousaf.kaukab@stericsson.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-12 11:52:46 +03:00
Per Forlin d366d39bab usb: musb: ux500: set dma config for both src and dst
The dma driver requires both src and dst to be set.
This fix is needed in order to run gadget mass storage.
Patch is verified on snowball.

Signed-off-by: Per Forlin <per.forlin@linaro.org>
Acked-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-12 11:52:45 +03:00
John Stultz 93e098a8fc usb: musb: fix oops on musb_gadget_pullup
an 'unhandled fault' is causes when a gadget driver calls
usb_gadget_connect() while the USB cable isn't plugged into
the OTG port.

the fault is caused by an access to MUSB's memory space
while its clock is turned off due to pm_runtime kicking
in.

in order to fix the fault, we enclose musb_gadget_pullup()
with pm_runtime_get_sync() ... pm_runtime_put() calls to
be sure we will always reach that path with clock turned on.

[ balbi@ti.com : simplified commit log; removed few things
	which didn't belong there ]

Cc: stable@kernel.org
Reported-by: Zach Pfeffer <zach.pfeffer@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-12 11:52:42 +03:00
Rabin Vincent 26e5c3e227 usb: musb: fix Kconfig
After 622859634 (usb: musb: drop a gigantic amount of ifdeferry):

 - USB_GADGET_MUSB_HDRC is no longer selectable because it
   depends on the removed USB_MUSB_PERIPHERAL and USB_MUSB_OTG
   options

 - The Kconfig comment still says "Enable Host or Gadget support
   to see Inventra options", even though you now need to enable
   both of them to see Inventra options.

Fix the dependency and drop the anyway unnecessary comment.

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-12 11:52:36 +03:00
Sergei Trofimovich 74c6f3a42a usb: musb: tusb6010_omap: fix build failure: error: 'musb' undeclared
CC      drivers/usb/musb/tusb6010_omap.o
drivers/usb/musb/tusb6010_omap.c: In function 'tusb_omap_use_shared_dmareq':
drivers/usb/musb/tusb6010_omap.c:92: error: 'musb' undeclared (first use in this function)
drivers/usb/musb/tusb6010_omap.c:92: error: (Each undeclared identifier is reported only once
drivers/usb/musb/tusb6010_omap.c:92: error: for each function it appears in.)

Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-12 11:52:35 +03:00
Russell King 667efc5894 ARM: gpio: davinci: convert drivers to use asm/gpio.h rather than mach/gpio.h
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-08 14:27:55 +01:00
John Stultz 72c487dfb9 usb: musb: fix oops on musb_gadget_pullup
an 'unhandled fault' is causes when a gadget driver calls
usb_gadget_connect() while the USB cable isn't plugged into
the OTG port.

the fault is caused by an access to MUSB's memory space
while its clock is turned off due to pm_runtime kicking
in.

in order to fix the fault, we enclose musb_gadget_pullup()
with pm_runtime_get_sync() ... pm_runtime_put() calls to
be sure we will always reach that path with clock turned on.

[ balbi@ti.com : simplified commit log; removed few things
	which didn't belong there ]

Cc: stable@kernel.org
Reported-by: Zach Pfeffer <zach.pfeffer@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-01 22:06:50 +03:00
Rabin Vincent b61ae34270 usb: musb: fix Kconfig
After 622859634 (usb: musb: drop a gigantic amount of ifdeferry):

 - USB_GADGET_MUSB_HDRC is no longer selectable because it
   depends on the removed USB_MUSB_PERIPHERAL and USB_MUSB_OTG
   options

 - The Kconfig comment still says "Enable Host or Gadget support
   to see Inventra options", even though you now need to enable
   both of them to see Inventra options.

Fix the dependency and drop the anyway unnecessary comment.

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-01 22:06:45 +03:00
Sergei Trofimovich 5574d5f036 usb: musb: tusb6010_omap: fix build failure: error: 'musb' undeclared
CC      drivers/usb/musb/tusb6010_omap.o
drivers/usb/musb/tusb6010_omap.c: In function 'tusb_omap_use_shared_dmareq':
drivers/usb/musb/tusb6010_omap.c:92: error: 'musb' undeclared (first use in this function)
drivers/usb/musb/tusb6010_omap.c:92: error: (Each undeclared identifier is reported only once
drivers/usb/musb/tusb6010_omap.c:92: error: for each function it appears in.)

Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-01 22:06:44 +03:00
Linus Torvalds f549953c15 Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (115 commits)
  EHCI: fix direction handling for interrupt data toggles
  USB: serial: add IDs for WinChipHead USB->RS232 adapter
  USB: OHCI: fix another regression for NVIDIA controllers
  usb: gadget: m66592-udc: add pullup function
  usb: gadget: m66592-udc: add function for external controller
  usb: gadget: r8a66597-udc: add pullup function
  usb: renesas_usbhs: support multi driver
  usb: renesas_usbhs: inaccessible pipe is not an error
  usb: renesas_usbhs: care buff alignment when dma handler
  USB: PL2303: correctly handle baudrates above 115200
  usb: r8a66597-hcd: fixup USB_PORT_STAT_C_SUSPEND shift
  usb: renesas_usbhs: compile/config are rescued
  usb: renesas_usbhs: fixup comment-out
  usb: update email address in ohci-sh and r8a66597-hcd
  usb: r8a66597-hcd: add function for external controller
  EHCI: only power off port if over-current is active
  USB: mon: Allow to use usbmon without debugfs
  USB: EHCI: go back to using the system clock for QH unlinks
  ehci: add pci quirk for Ordissimo and RM Slate 100 too
  ehci: refactor pci quirk to use standard dmi_check_system method
  ...

Fix up trivial conflicts in Documentation/feature-removal-schedule.txt
2011-07-25 23:08:32 -07:00
Jiri Kosina b7e9c223be Merge branch 'master' into for-next
Sync with Linus' tree to be able to apply pending patches that
are based on newer code already present upstream.
2011-07-11 14:15:55 +02:00
Ajay Kumar Gupta 3c5fec75e1 usb: musb: restore INDEX register in resume path
Restoring the missing INDEX register value in musb_restore_context().
Without this suspend resume functionality is broken with offmode
enabled.

Cc: stable@kernel.org
Acked-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-07-08 12:47:25 +03:00
Felipe Balbi 8220796df8 usb: musb: no need to access platform_device
dev_get_drvdata() is exactly the same as
platform_get_drvdata(). Drop that useless
access to the platform device.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01 14:31:15 -07:00
Sebastian Andrzej Siewior e71eb392c2 usb: musb: convert musb to new style bind
udc-core checks for valid callbacks so there is no need for the driver
to do so. Also "can-be-bound-once" is verified by udc-core. The pull-up
callback is called by udc-core afterwords.

[ balbi@ti.com : keep holding gadget_driver pointer for now
		 remove the stupid check for gadget_driver otherwise
		  we don't handle IRQs ]

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01 14:31:13 -07:00
Felipe Balbi ee34e51a74 usb: musb: choose correct fifo_mode
When we start building glue layers as modules,
we need to be careful with the fifo_mode changes
otherwise that weird ifdeferry won't evaluate
correctly. Add the missing _MODULE variants for
all glue layers to prevent everybody from using
fifo_mode 2.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01 14:31:10 -07:00
Felipe Balbi 622859634a usb: musb: drop a gigantic amount of ifdeferry
the MUSB IP is always OTG, so there's no point
in adding so many ifdefs on the code. Drop those
and always compile the driver for OTG support.

This also allows us to drop the useless "driver
mode" choice. For doing that, we need to make
musb depend on both Host and Peripheral side.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01 14:31:10 -07:00
Felipe Balbi e4e5b136eb usb: musb: be careful when using different fifo_modes
if we have more endpoints configured than
enabled on fifo_mode, then we need to be
careful on save/restore context operations,
otherwise we will try to access uninitialized
__iomem pointer.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01 14:31:09 -07:00
Mike Frysinger 9ea35331d0 usb: musb: update musb_platform_ops docs to match code
The "channel_program" member was renamed to "adjust_channel_params",
but the documentation wasn't updated.

Reported-by: Sergei Shtylyov <sshtylyov@mvista.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01 14:27:04 -07:00
Sebastian Andrzej Siewior 0f91349b89 usb: gadget: convert all users to the new udc infrastructure
peripheral drivers are using usb_add_gadget()/usb_del_gadget() to
register/unregister to the udc-core.

The udc-core will take the first available gadget driver and attach
function driver which is calling usb_gadget_register_driver(). This is
the same behaviour we have right now.

Only dummy_hcd was tested, the others were compiled tested.

Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Anton Tikhomirov <av.tikhomirov@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Dan Carpenter <error27@gmail.com>
Cc: Darius Augulis <augulis.darius@gmail.com>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Jingoo Han <jg1.han@samsung.com>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Li Yang <leoli@freescale.com>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Pavankumar Kondeti <pkondeti@codeaurora.org>
Cc: Roy Huang <roy.huang@analog.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com>
Cc: Xiaochen Shen <xiaochen.shen@intel.com>
Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Cc: Yuan-Hsin Chen <yhchen@faraday-tech.com>
Cc: cxie4 <cxie4@marvell.com>
Cc: linux-geode@lists.infradead.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-28 11:13:35 -07:00
Joe Perches 7c9d440e90 treewide: transciever/transceiver spelling fixes
Just tyops.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-24 11:20:14 +02:00
Yauheni Kaliuta 4858f06e7d usb: musb: gadget: clear TXPKTRDY flag when set FLUSHFIFO
Fixes mis-use of MUSB's hardware feature where it won't
flush FIFOs when TXPKTRDY flag was set before and we are
flushing setting both FLUSHFIFO and TXPKTRDY.

In other words, we need to ensure that when we try to
flush FIFOs, we don't accidentaly set TXPKTRDY bit too
due to a read-back of the register.

The MUSB Programming Guide says "May be set simultaneously
with TxPktRdy to abort the packet that is currently being
loaded into the FIFO". This is a situation where TXPKTRDY
hasn't been set yet, but some data already loaded into the
fifo. It looks, that if TXPKTRDY has been set before, and
there is no loading in progress, but we set FLUSHFIFO with
the TXPKTRDY, controller tries to use the same logic to
abort loading and as the result just does nothing (because
there is no packet been loaded currently)

Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@nokia.com>

[ balbi@ti.com : fixed one whitespace git complained about
		 improved the commit log slightly ]

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-06-09 12:01:03 +03:00
Márton Németh 72887c8644 usb: musb: host: compare status for negative error values
Variable d is a struct usb_iso_packet_descriptor. The status filed is usually
negative when an error happens.

Signed-off-by: Márton Németh <nm127@freemail.hu>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-06-09 12:01:03 +03:00
Mike Frysinger 9303961f5b musb: fix prefetch build failure
After the prefetch/list.h restructure, drivers need to explicitly include
linux/prefetch.h in order to use the prefetch() function.  Otherwise, the
current driver fails to build:

drivers/usb/musb/musb_core.c: In function 'musb_write_fifo':
drivers/usb/musb/musb_core.c:219: error: implicit declaration of function 'prefetch'
make[3]: *** [drivers/usb/musb/musb_core.o] Error 1

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-06 16:02:31 -07:00
Mian Yousaf Kaukab d23894402b usb: musb: ux500: add configuration and build options for ux500 dma
Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-05-18 14:43:16 +03:00
Mian Yousaf Kaukab 8dcc8f72e3 usb: musb: ux500: add dma glue layer for ux500
Unaligned sizes and buffers are not supported and they will be filtered
out by is_compatible().

Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-05-18 14:43:15 +03:00
Mian Yousaf Kaukab e3c496f9b3 usb: musb: ux500: add dma name for ux500
Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-05-18 14:43:14 +03:00
Mian Yousaf Kaukab a48ff90678 usb: musb: ux500: add ux500 specific code for gadget side
Although U8500 and U5500 platforms use paltform dma, Inventra dma specific code
can work for them for the most part. Only difference is for the Rx path where
this patch is making use of request->short_not_ok to select dma mode.

Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-05-18 14:43:13 +03:00
Felipe Balbi 28e4970555 usb: musb: fix compile error
commit 35a83365da6aa10095c6138cc428c15853409c32
(usb: musb: drop unneeded musb_debug trickery)
introduced a compile error for blackfin and
tusb6010 glue layers. Fix it.

Reported-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-05-18 14:43:12 +03:00
Hema HK 8620543eda usb: musb: Calling VBUS pulsing API when SRP is initiated.
Call VBUS pulsing API when there is SRP initiation from user space.

Signed-off-by: Hema HK <hemahk@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-05-13 14:43:56 +03:00
Sergei Shtylyov c51e36dc11 usb: musb: host: remove duplicate check in musb_ep_program()
musb_ep_program() contains obviously duplicate check for 'dma_channel' in its
IN/receive path -- removing it allows to save one level of indentation. While
at it, improve the comment style...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-05-13 14:34:07 +03:00
Felipe Balbi 981430a170 usb: musb: export musb_interrupt symbol
currently that's used by another module
(am35x) which, granted, it shouldn't be
using that, but in order to avoid compile
errors, let's export that symbol temporarily
until re-factoring work is done on that
driver.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-05-13 14:34:06 +03:00
Felipe Balbi 1376d92f9e usb: musb: allow musb and glue layers to be modules
This in part reverts commit 7a180e70cf.
(usb: musb: temporarily make it bool) and while
at that we also allow glue layers to be compiled
as modules.

There are still some other changes needed
until we can have a fully functional build
with this setup, but we're getting there.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-05-13 14:34:05 +03:00
Felipe Balbi 5c8a86e10a usb: musb: drop unneeded musb_debug trickery
We have a generic way of enabling/disabling
different debug messages on a driver called
DYNAMIC_PRINTK. Anyone interested in enabling
just part of the debug messages, please read
the documentation under:

Documentation/dynamic-debug-howto.txt

for information on how to use that great
infrastructure.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-05-13 14:34:04 +03:00
Greg Kroah-Hartman 8a1629c771 Merge branch 2.6.39-rc7 into usb-linus
This was needed to resolve a conflict in:
	drivers/usb/host/isp1760-hcd.c

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-10 13:30:45 -07:00
Anatolij Gustschin 3df0045325 usb: fix building musb drivers
Commit 3dacdf11 "usb: factor out state_string() on otg drivers"
broke building musb drivers since there is already another
otg_state_string() function in musb drivers, but with different
prototype. Fix musb drivers to use common otg_state_string(), too.

Also provide a nop for otg_state_string() if CONFIG_USB_OTG_UTILS
is not defined.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-06 18:16:39 -07:00
Jarkko Nikula cdefce1695 usb: musb: gadget: Fix out-of-sync runtime pm calls
If cable is not connected to peripheral only board when initializing the
gadget driver, then runtime pm calls are out-of-sync and the musb cannot
idle with omap2430.c. This was noted on Nokia N900 where musb prevented the
CPU to be able to enter deeper retention idle state.

This was working in 2.6.38 before runtime pm conversions but there musb
smart standby/idle modes were configured statically where they are now
updated runtime depending on use and cable status.

Reason for out-of-sync is that runtime pm is activated in function
musb_gadget.c: usb_gadget_probe_driver but suspended only in OTG mode if
cable is not connected when initializing. In peripheral only mode this leads
to out-of-sync runtime pm since runtime pm remain active and is activated
another time in omap2430.c: musb_otg_notifications for VBUS Connect event
and thus cannot suspend for VBUS Disconnect event since the use count remains
active.

Fix this by moving cable status check and pm_runtime_put call in
usb_gadget_probe_driver out of is_otg_enabled block.

Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-05-02 12:34:33 +03:00
Jarkko Nikula 383cf4e8d4 usb: musb: omap2430: Fix retention idle on musb peripheral only boards
Recent runtime pm and hwmod conversions for 2.6.39 broke the musb peripheral
mode OMAP retention idle on boards where the board mode in struct
musb_hdrc_platform_data is set to MUSB_PERIPHERAL.

These conversions changed the way how the OTG_SYSCONFIG register is
configured and used in runtime. Before 2.6.39 smart standby/idle modes were
activated statically in OTG_SYSCONFIG. Those modes allow that the musb is
able to idle when peripheral device is not connected to host.

In 2.6.39 the OTG_SYSCONFIG is updated runtime depending on VBUS status.
No standby/idle modes are used when device is connected and force
standby/idle when disconnected.

Unfortunately VBUS disconnect event that handles the disconnect case lets
the peripheral musb to idle only when board mode is MUSB_OTG. Fix this by
checking the peripheral mode also.

Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-05-02 12:34:32 +03:00
Johan Hovold 36a52c009a usb: musb: omap2430: fix build failure
Fix build failure introduced by commit
7acc6197b7 (usb: musb: Idle path retention
and offmode support for OMAP3) when building without gadget
support.

  CC      drivers/usb/musb/omap2430.o
drivers/usb/musb/omap2430.c: In function ‘musb_otg_notifications’:
drivers/usb/musb/omap2430.c:262: error: ‘struct musb’ has no member named ‘gadget_driver’

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13 15:44:02 -07:00
Mike Frysinger 132543074a USB: musb: blackfin: work around anomaly 05000450
DMA mode 1 data corruption anomaly on Blackfin systems.  This issue is
specific to the Blackfin silicon as the bug appears to be related to the
connection of the musb ip to the bus/dma fabric.

Data corruption when using USB DMA mode 1. (Issue manager 17-01-0105)
DMA mode 1 allows large size transfers to generate a single interrupt
at the end of the entire transfer.  The transfer is split up in packets
of length specified in the Maximum Packet Size field for that endpoint.
If the transfer size is not an integer multiple of the Maximum Packet
Size, a short packet will be present at the end of the transfer.

Under certain conditions this packet may be corrupted in the USB FIFO.

Workaround:
Use DMA mode 1 to transfer (n* Maximum Packet Size) and schedule DMA
mode 0 to transfer the short packet.

As an example if your transfer size is 33168 bytes and Maximum Packet
Size equals 512, schedule [33168 - (33168 mod 512)] in DMA mode 1 and
the remainder (33168 mod 512) in DMA mode 0.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-04-13 11:51:28 +03:00
Hema HK 4f9edd2d7e usb: musb: Fix the crash issue during reboot
Below crash observed with commit 7acc6197b7
(usb: musb: Idle path retention and offmode support for OMAP3)
during board reboot.

The musb clock was disabled when musb_shutdown() was called by
platform_drv_shutdown in which there are register accesses.
call pm_runtime_get_sync() and pm_runtime_put_sync() in the
musb_shutdown function.

/ # [  172.368774] Unhandled fault: imprecise external abort (0x1406) at 0x400f0000
[  172.376190] Internal error: : 1406 [] SMP
[  172.380554] last sysfs file: /sys/devices/platform/omap/omap_i2c.4/i2c-4/i2c-dev/i2c-4/dev
[  172.389221] Modules linked in:
[  172.392456] CPU: 0    Tainted: G        W    (2.6.38-06671-geddecbb )
[  172.399475] PC is at do_raw_spin_unlock+0x50/0xc0
[  172.404418] LR is at _raw_spin_unlock_irqrestore+0x24/0x44
[  172.410186] pc : [<c069bfdc>]    lr : [<c085a7f8>]    psr: 60000093
[  172.410186] sp : ee993e40  ip : c0d00240  fp : bea9cf14
[  172.422241] r10: 00000000  r9 : ee992000  r8 : c04b2fa8
[  172.427703] r7 : 00000000  r6 : c0fa46c0  r5 : ef966124  r4 : ef966124
[  172.434539] r3 : ef92cbc0  r2 : ef92cbc0  r1 : 00000000  r0 : ef966124
[  172.441406] Flags: nZCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment user
[  172.448974] Control: 10c5387d  Table: ae8d804a  DAC: 00000015
[  172.454986] Process init (pid: 1094, stack limit = 0xee9922f8)
[  172.461120] Stack: (0xee993e40 to 0xee994000)
[  172.465667] 3e40: a0000013 c085a7f8 ef966124 a0000013 c0fa46c0 c0761ab4 c0761a70 ef95c008
[  172.474273] 3e60: ef95c014 c06e2fd0 c06e2fbc c06dea90 00000000 01234567 28121969 c04fccb4
[  172.482849] 3e80: 00000000 c04fcd04 c0a302bc c04fce44 c0a02600 00000001 00000000 c085cd04
[  172.491424] 3ea0: 00000000 00000002 c09ea000 c085afc0 ee993f24 00000000 00040001 00000445
[  172.499999] 3ec0: a8eb9d34 00000027 00000000 00000000 00000000 c0a56a4c 00000000 00000000
[  172.508575] 3ee0: 00000002 60000093 00000000 c0519aac 00000002 00000080 00000000 c0550420
[  172.517150] 3f00: 00000000 00000002 ee970000 c0a56a3c c0a56a20 00000002 c0a56a3c 00000000
[  172.525726] 3f20: c0a56a3c 0000000a c1580e00 c0a56a20 00000002 c0a56a3c c1580e00 c0a56a20
[  172.534301] 3f40: ef92cbc0 c05173a0 00000001 ef92cbc0 c0576190 c04e3174 20000013 c0517324
[  172.542877] 3f60: ef815c00 ee90b720 c04e3174 c0576190 00000001 ef92cbc0 c04b2f00 ffffffff
[  172.551483] 3f80: 00000058 c0517324 00000000 00000000 ffffffff 00000000 00000000 ffffffff
[  172.560058] 3fa0: 00000058 c04b2de0 00000000 00000000 fee1dead 28121969 01234567 00000000
[  172.568634] 3fc0: 00000000 00000000 ffffffff 00000058 00000000 00000001 400aa000 bea9cf14
[  172.577209] 3fe0: 000ea148 bea9c958 000aa750 40225728 60000010 fee1dead 00000000 00000000
[  172.585784] [<c069bfdc>] (do_raw_spin_unlock+0x50/0xc0) from [<c085a7f8>] (_raw_spin_unlock_irqrestore+0x24/0x44)
[  172.596588] [<c085a7f8>] (_raw_spin_unlock_irqrestore+0x24/0x44) from [<c0761ab4>] (musb_shutdown+0x44/0x88)
[  172.606933] [<c0761ab4>] (musb_shutdown+0x44/0x88) from [<c06e2fd0>] (platform_drv_shutdown+0x14/0x18)
[  172.616699] [<c06e2fd0>] (platform_drv_shutdown+0x14/0x18) from [<c06dea90>] (device_shutdown+0x74/0xb4)
[  172.626647] [<c06dea90>] (device_shutdown+0x74/0xb4) from [<c04fccb4>] (kernel_restart_prepare+0x24/0x38)
[  172.636688] [<c04fccb4>] (kernel_restart_prepare+0x24/0x38) from [<c04fcd04>] (kernel_restart+0xc/0x48)
[  172.646545] [<c04fcd04>] (kernel_restart+0xc/0x48) from [<c04fce44>] (sys_reboot+0xfc/0x1d8)
[  172.655426] [<c04fce44>] (sys_reboot+0xfc/0x1d8) from [<c04b2de0>] (ret_fast_syscall+0x0/0x3c)
[  172.664459] Code: e3c3303f e594200c e593300c e1520003 (0a000002)
[  172.670867] ------------[ cut here ]------------

Signed-off-by: Hema HK <hemahk@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-04-13 11:51:28 +03:00
Felipe Balbi 3d5ad13eac usb: musb: gadget: check the correct list_head
We are now using our own list_head, so we should
be checking against that, not the gadget driver's
list_head.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-04-13 11:51:26 +03:00
Felipe Balbi 7a180e70cf usb: musb: temporarily make it bool
Due to the recent changes to musb's glue layers,
we can't compile musb-hdrc as a module - compilation
will break due to undefined symbol musb_debug. In
order to fix that, we need a big re-work of the
debug support on the MUSB driver.

Because that would mean a lot of new code coming
into the -rc series, it's best to defer that to
next merge window and for now just disable module
support for MUSB.

Once we get the refactor of the debugging support
done, we can simply revert this patch and things
will go back to normal again.

Cc: stable@kernel.org # v2.6.38
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-04-13 11:51:25 +03:00
Dan Carpenter 2e10f5e70f USB: musb: dereferencing an iomem pointer
"tx_ram" points to io memory.  We can't dereference it directly.  Sparse
complains about this: "drivers/usb/musb/cppi_dma.c:1205:25: warning:
dereference of noderef expression"

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-04-13 11:51:24 +03:00
Dan Carpenter 2fbcf3fa43 USB: musb: silence printk format warning
Gcc gives the following warnings:

drivers/usb/musb/cppi_dma.c: In function ‘cppi_next_tx_segment’:
drivers/usb/musb/cppi_dma.c:600: warning: format ‘%x’ expects type ‘unsigned int’, but argument 8 has type ‘dma_addr_t’
drivers/usb/musb/cppi_dma.c: In function ‘cppi_next_rx_segment’:
drivers/usb/musb/cppi_dma.c:822: warning: format ‘%x’ expects type ‘unsigned int’, but argument 9 has type ‘dma_addr_t’
drivers/usb/musb/cppi_dma.c: In function ‘cppi_rx_scan’:
drivers/usb/musb/cppi_dma.c:1042: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 4 has type ‘dma_addr_t’
drivers/usb/musb/cppi_dma.c:1114: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 7 has type ‘dma_addr_t’

dma_addr_t is sometimes 32 bit and sometimes 64.  We normally cast them
to unsigned long long for printk().

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-04-13 11:51:23 +03:00
Dan Carpenter aca7f35321 USB: musb: using 0 instead of NULL
Sparse complains (and rightly so):
drivers/usb/musb/cppi_dma.c:1458:33:
	warning: Using plain integer as NULL pointer

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-04-13 11:51:21 +03:00
Dan Carpenter ec63bf6c06 USB: musb: add missing unlock in cppi_interrupt()
We should unlock before returning here.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-04-13 11:50:58 +03:00
Mian Yousaf Kaukab 8726606424 usb: musb: ux500: copy dma mask from platform device to musb device
musb code checks dma mask before calling dma hooks.

Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-04-13 11:50:57 +03:00
Mian Yousaf Kaukab 100d4a9d20 usb: musb: clear AUTOSET while clearing DMAENAB
On the completion of tx dma, dma is disabled by clearing MUSB_TXCSR_DMAENAB in
TXCSR. If MUSB_TXCSR_AUTOSET was set in txstate() it will remain set although
it is not needed in PIO mode. Clear it as soon as it is not needed.

Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-04-13 11:50:55 +03:00
Thomas Gleixner dced35aeb0 drivers: Final irq namespace conversion
Scripted with coccinelle.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29 14:48:19 +02:00
Mike Frysinger 45567c28d2 usb: musb: blackfin: fix typo in new bfin_musb_vbus_status func
The common code has a "get" in the middle, but each implementation
does not have it.

Cc: stable@kernel.org
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23 13:14:31 -07:00
Bob Liu 8f7e7b87ec usb: musb: blackfin: fix typo in new dev_pm_ops struct
Cc: stable@kernel.org
Signed-off-by: Bob Liu <lliubbo@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23 13:14:30 -07:00
Mike Frysinger 417ddf86c8 usb: musb: blackfin: fix typo in platform driver name
The modularization of the Blackfin driver set the name to "musb-blackfin"
in all the boards, but "musb-bfin" in the driver itself.  Since the driver
file name uses "blackfin", change the driver to "musb-blackfin".  This is
also easier as it's only one file to change.

Cc: stable@kernel.org
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23 13:14:18 -07:00
Hema HK 5f1e8ce75c usb: musb: Fix for merge issue
There was conflict while merging 2 patches. Enabling vbus code
is wrongly moved to error check if loop.

This is a fix to resolve the merge issue.

Signed-off-by: Hema HK <hemahk@ti.com>
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23 13:14:17 -07:00
Linus Torvalds 0df0914d41 Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (258 commits)
  omap: zoom: host should not pull up wl1271's irq line
  arm: plat-omap: iommu: fix request_mem_region() error path
  OMAP2+: Common CPU DIE ID reading code reads wrong registers for OMAP4430
  omap4: mux: Remove duplicate mux modes
  omap: iovmm: don't check 'da' to set IOVMF_DA_FIXED flag
  omap: iovmm: disallow mapping NULL address when IOVMF_DA_ANON is set
  omap2+: mux: Fix compile when CONFIG_OMAP_MUX is not selected
  omap4: board-omap4panda: Initialise the serial pads
  omap3: board-3430sdp: Initialise the serial pads
  omap4: board-4430sdp: Initialise the serial pads
  omap2+: mux: Add macro for configuring static with omap_hwmod_mux_init
  omap2+: mux: Remove the use of IDLE flag
  omap2+: Add separate list for dynamic pads to mux
  perf: add OMAP support for the new power events
  OMAP4: Add IVA OPP enteries.
  OMAP4: Update Voltage Rail Values for MPU, IVA and CORE
  OMAP4: Enable 800 MHz and 1 GHz MPU-OPP
  OMAP3+: OPP: Replace voltage values with Macros
  OMAP3: wdtimer: Fix CORE idle transition
  Watchdog: omap_wdt: add fine grain runtime-pm
  ...

Fix up various conflicts in
 - arch/arm/mach-omap2/board-omap3evm.c
 - arch/arm/mach-omap2/clock3xxx_data.c
 - arch/arm/mach-omap2/usb-musb.c
 - arch/arm/plat-omap/include/plat/usb.h
 - drivers/usb/musb/musb_core.h
2011-03-17 19:28:15 -07:00
Linus Torvalds 971f115a50 Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (172 commits)
  USB: Add support for SuperSpeed isoc endpoints
  xhci: Clean up cycle bit math used during stalls.
  xhci: Fix cycle bit calculation during stall handling.
  xhci: Update internal dequeue pointers after stalls.
  USB: Disable auto-suspend for USB 3.0 hubs.
  USB: Remove bogus USB_PORT_STAT_SUPER_SPEED symbol.
  xhci: Return canceled URBs immediately when host is halted.
  xhci: Fixes for suspend/resume of shared HCDs.
  xhci: Fix re-init on power loss after resume.
  xhci: Make roothub functions deal with device removal.
  xhci: Limit roothub ports to 15 USB3 & 31 USB2 ports.
  xhci: Return a USB 3.0 hub descriptor for USB3 roothub.
  xhci: Register second xHCI roothub.
  xhci: Change xhci_find_slot_id_by_port() API.
  xhci: Refactor bus suspend state into a struct.
  xhci: Index with a port array instead of PORTSC addresses.
  USB: Set usb_hcd->state and flags for shared roothubs.
  usb: Make core allocate resources per PCI-device.
  usb: Store bus type in usb_hcd, not in driver flags.
  usb: Change usb_hcd->bandwidth_mutex to a pointer.
  ...
2011-03-16 15:04:26 -07:00
John Youn dbe79bbe9d USB 3.0 Hub Changes
Update the USB core to deal with USB 3.0 hubs.  These hubs have a slightly
different hub descriptor than USB 2.0 hubs, with a fixed (rather than
variable length) size.  Change the USB core's hub descriptor to have a
union for the last fields that differ.  Change the host controller drivers
that access those last fields (DeviceRemovable and PortPowerCtrlMask) to
use the union.

Translate the new version of the hub port status field into the old
version that khubd understands.  (Note: we need to fix it to translate the
roothub's port status once we stop converting it to USB 2.0 hub status
internally.)

Add new code to handle link state change status.  Send out new control
messages that are needed for USB 3.0 hubs, like Set Hub Depth.

This patch is a modified version of the original patch submitted by John
Youn.  It's updated to reflect the removal of the "bitmap" #define, and
change the hub descriptor accesses of a couple new host controller
drivers.

Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Cc: Tony Olech <tony.olech@elandigitalsystems.com>
Cc: "Robert P. J. Day" <rpjday@crashcourse.ca>
Cc: Max Vozeler <mvz@vozeler.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: Rodolfo Giometti <giometti@linux.it>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Anton Vorontsov <avorontsov@mvista.com>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Lothar Wassmann <LW@KARO-electronics.de>
Cc: Olav Kongas <ok@artecdesign.ee>
Cc: Martin Fuzzey <mfuzzey@gmail.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: David Brownell <dbrownell@users.sourceforge.net>
2011-03-13 18:07:11 -07:00
Tony Lindgren 12d7d4e0ed Merge branch 'devel-cleanup' into omap-for-linus
Conflicts:
	arch/arm/mach-omap2/timer-gp.c
2011-03-02 17:07:14 -08:00
Huzaifa Sidhpurwala c88ba39c1e usb: musb: tusb: Fix possible null pointer dereference in tusb6010_omap.c
tusb_dma was being dereferenced when it was nul

Signed-off-by: Huzaifa Sidhpurwala <huzaifas@redhat.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-03-01 12:35:23 +02:00
Hema HK 70045c57f3 usb: musb: OMAP3xxx: Fix device detection in otg & host mode
In OMAP3xxx with OTG mode or host only mode, When the device
is inserted after the gadget driver loading the enumeration was not
through. This is because the mentor controller will start sensing the
ID PIN only after setting the session bit.
So after ID-GND, need to set the session bit for mentor to get it
configured as A device.

This is a fix to set the session bit again in ID_GND notification handler.
Tested with OMAP3630Zoom3 platform.

Signed-off-by: Hema HK <hemahk@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-03-01 12:23:03 +02:00
Hema HK 7acc6197b7 usb: musb: Idle path retention and offmode support for OMAP3
This patch supports the retention and offmode support in the idle path for
musb driver using runtime pm APIs.

This is restricted to support offmode and retention only when device not
connected.When device/cable connected with gadget driver loaded,configured
to no idle/standby which will not allow the core transition to retention
or off.

There is no context save/restore done by hardware for musb in OMAP3
and OMAP4,driver has to take care of saving and restoring the context
during offmode.

Musb has a requirement of configuring sysconfig register to force
idle/standby mode and set the ENFORCE bit in module STANDBY register
for retention and offmode support.

Runtime pm and hwmod frameworks will take care of configuring to force
idle/standby when pm_runtime_put_sync is called and back to no
idle/standby when pm_runeime_get_sync is called.

Compile, boot tested and also tested the retention in the idle path on
OMAP3630Zoom3. And tested the global suspend/resume with offmode enabled.
Usb basic functionality tested on OMAP4430SDP.

There is some problem with idle path offmode in mainline, I could not test
with offmode. But I have tested this patch with resetting the controller
in the idle path when wakeup from retention just to make sure that the
context is lost, and restore path is working fine.

Removed .suspend/.resume fnction pointers and functions because there
is no need of having these functions as all required work is done
at runtime in the driver.

There is no need to call the runtime pm api with glue driver device
as glue layer device is the parent of musb core device, when runtime apis
are called for the child, parent device runtime functionality
will be invoked.

Design overview:

pm_runtime_get_sync: When called with musb core device takes care of
enabling the clock, calling runtime callback function of omap2430 glue
layer, runtime call back of musb driver and configure the musb sysconfig
to no idle/standby

pm_runtime_put: Takes care of calling runtime callback function of omap2430
glue layer, runtime call back of musb driver, Configure the musb sysconfig
to force idle/standby and disable the clock.

During musb driver load: Call pm_runtime_get_sync.

End of musb driver load: Call pm_runtime_put

During gadget driver load: Call pm_runtime_get_sync,
End of gadget driver load: Call pm_runtime_put if there is no device
or cable is connected.

During unload of the gadget driver:Call pm_runtime_get_sync if cable/device
is not connected.
End of the gadget driver unload : pm_runtime_put

During unload of musb driver : Call pm_runtime_get_sync
End of unload: Call pm_runtime_put

On connect of usb cable/device -> transceiver notification(VBUS and ID-GND):
pm_runtime_get_sync only if the gadget driver loaded.

On disconnect of the cable/device -> Disconnect Notification:
pm_runtime_put if the gadget driver is loaded.

Signed-off-by: Hema HK <hemahk@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-03-01 11:35:12 +02:00
Hema HK da68ccec21 usb: musb: Remove platform context save/restore API
For OMAP3 and OMAP4 for offmode and retention support, musb
sysconfig is configured to force idle and standby with ENABLE_FORCE bit
of OTG_FORCESTNDBY set.
And on wakeup configure to no ilde/standby with resetting the ENABLE_FORCE
bit. There is not need to save and restore of this register anymore
so removed omap2430_save_context/omap2430_restore_context functions.
and also removed otg_forcestandby member of musb_context_registers
structure

Signed-off-by: Hema HK <hemahk@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-03-01 11:35:11 +02:00
Felipe Balbi 4cbbf08443 usb: musb: gadget: fix list_head usage
commit ad1adb89a0
(usb: musb: gadget: do not poke with gadget's list_head)
fixed a bug in musb where it was corrupting the list_head
which is supposed to be used by gadget drivers. While
doing that, I forgot to fix the usage in musb_gadget_dequeue()
method. Fix that.

Reported-by: Pavol Kurina <pavol.kurina@emsys.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-03-01 11:34:55 +02:00
Felipe Balbi ec95d35a6b usb: musb: core: set has_tt flag
MUSB is a non-standard host implementation which
can handle all speeds with the same core. We need
to set has_tt flag after commit
d199c96d41 (USB: prevent
buggy hubs from crashing the USB stack) in order for
MUSB HCD to continue working.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Cc: stable <stable@kernel.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Michael Jones <michael.jones@matrix-vision.de>
Tested-by: Alexander Holler <holler@ahsoftware.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-24 11:16:24 -08:00
Sergei Shtylyov 0fd857ae09 usb: musb: gadget: DBG() already prints function name
In the gadget code, there are several DBG() macro invocations that explicitly
print the calling function's name while DBG() macro itself does this anyway;
most of these were added by commit f11d893de4
(usb: musb: support ISO high bandwidth for gadget mode). Remove the duplicated
printing, somewhat clarifying the messages at the same time...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-02-21 10:14:33 +02:00
Hema HK 002eda1348 usb: musb: OMAP4430: Fix usb device detection if connected during boot
OMAP4430 is embedded with UTMI PHY. This PHY does not support the
OTG features like ID pin detection and VBUS detection. This function
is exported to an external companion chip TWL6030. Software must retrieve
the OTG HNP and SRP status from the TWL6030 and configure the bits inside
the control module that drive the related USBOTGHS UTMI interface signals.
It must also read back the UTMI signals needed to configure the TWL6030
OTG module.

Can find more details in the TRM[1].
[1]:http://focus.ti.com/pdfs/wtbu/OMAP4430_ES2.0_Public_TRM_vJ.pdf

In OMAP4430 musb driver VBUS and ID notifications are received from the
transceiver driver. If the cable/device is connected during boot,
notifications from transceiver driver will be missed till musb driver
is loaded.
Patch to configure the transceiver in the platform_enable/disable
functions and enable the vbus in the gadget driver based on the
last_event of the otg_transceiver.

Signed-off-by: Hema HK <hemahk@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-02-18 14:05:53 +02:00
Hema HK 207b0e1f16 usb: musb: Using runtime pm APIs for musb.
Calling runtime pm APIs pm_runtime_put_sync() and pm_runtime_get_sync()
for enabling/disabling the clocks, sysconfig settings.

Enable clock, configure no-idle/standby when active and configure force idle/standby
and disable clock when idled. This is taken care by the runtime framework when
driver calls the pm_runtime_get_sync and pm_runtime_put_sync APIs.
Need to configure MUSB into force standby and force idle mode when usb not used

Signed-off-by: Hema HK <hemahk@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Cousson, Benoit <b-cousson@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-02-17 21:11:46 +02:00
Felipe Balbi ad1adb89a0 usb: musb: gadget: do not poke with gadget's list_head
struct usb_request's list_head is supposed to be
used only by gadget drivers, but musb is abusing
that. Give struct musb_request its own list_head
and prevent musb from poking into other driver's
business.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-02-17 21:11:46 +02:00
Felipe Balbi 63eed2b524 usb: musb: gadget: beautify usb_gadget_probe_driver()/usb_gadget_unregister_driver
Just a few cosmetic fixes to usb_gadget_probe_driver()
and usb_gadget_unregister_driver().

Decreased a few indentation levels with goto statements.

While at that, also add the missing call to musb_stop().
If we don't have OTG, there's no point of leaving
MUSB prepared for operation if a gadget driver fails
to probe. The same is valid for usb_gadget_unregister_driver(),
since we are removing the gadget driver and we don't have
OTG, we can completely unconfigure MUSB.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-02-17 21:11:46 +02:00
Felipe Balbi 75a14b1434 usb: musb: do not error out if Kconfig doesn't match board mode
During development, even though board is wired
to e.g. OTG, we might want to compile host-only
or peripheral-only configurations.

Let's allow that to happen.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-02-17 21:11:45 +02:00
Greg Kroah-Hartman 66b0835e2b Merge 2.6.38-rc5 into usb-next
This is needed to resolve some merge conflicts that were found
in the USB host controller patches, and reported by Stephen Rothwell.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17 09:56:55 -08:00
Johan Hovold b193b412e6 usb: musb: omap2430: fix kernel panic on reboot
Cancel idle timer in musb_platform_exit.

The idle timer could trigger after clock had been disabled leading to
kernel panic when MUSB_DEVCTL is accessed in musb_do_idle on 2.6.37.

The fault below is no longer triggered on 2.6.38-rc4 (clock is disabled
later, and only if compiled as a module, and the offending memory access
has moved) but the timer should be cancelled nonetheless.

Rebooting... musb_hdrc musb_hdrc: remove, state 4
usb usb1: USB disconnect, address 1
musb_hdrc musb_hdrc: USB bus 1 deregistered
Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa0ab060
Internal error: : 1028 [] PREEMPT
last sysfs file: /sys/kernel/uevent_seqnum
Modules linked in:
CPU: 0    Not tainted  (2.6.37+ )
PC is at musb_do_idle+0x24/0x138
LR is at musb_do_idle+0x18/0x138
pc : [<c02377d8>]    lr : [<c02377cc>]    psr: 80000193
sp : cf2bdd80  ip : cf2bdd80  fp : c048a20c
r10: c048a60c  r9 : c048a40c  r8 : cf85e110
r7 : cf2bc000  r6 : 40000113  r5 : c0489800  r4 : cf85e110
r3 : 00000004  r2 : 00000006  r1 : fa0ab000  r0 : cf8a7000
Flags: Nzcv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment user
Control: 10c5387d  Table: 8faac019  DAC: 00000015
Process reboot (pid: 769, stack limit = 0xcf2bc2f0)
Stack: (0xcf2bdd80 to 0xcf2be000)
dd80: 00000103 c0489800 c02377b4 c005fa34 00000555 c0071a8c c04a3858 cf2bdda8
dda0: 00000555 c048a00c cf2bdda8 cf2bdda8 1838beb0 00000103 00000004 cf2bc000
ddc0: 00000001 00000001 c04896c8 0000000a 00000000 c005ac14 00000001 c003f32c
dde0: 00000000 00000025 00000000 cf2bc000 00000002 00000001 cf2bc000 00000000
de00: 00000001 c005ad08 cf2bc000 c002e07c c03ec039 ffffffff fa200000 c0033608
de20: 00000001 00000000 cf852c14 cf81f200 c045b714 c045b708 cf2bc000 c04a37e8
de40: c0033c04 cf2bc000 00000000 00000001 cf2bde68 cf2bde68 c01c3abc c004f7d8
de60: 60000013 ffffffff c0033c04 00000000 01234567 fee1dead 00000000 c006627c
de80: 00000001 c00662c8 28121969 c00663ec cfa38c40 cf9f6a00 cf2bded0 cf9f6a0c
dea0: 00000000 cf92f000 00008914 c02cd284 c04a55c8 c028b398 c00715c0 becf24a8
dec0: 30687465 00000000 00000000 00000000 00000002 1301a8c0 00000000 00000000
dee0: 00000002 1301a8c0 00000000 00000000 c0450494 cf527920 00011f10 cf2bdf08
df00: 00011f10 cf2bdf10 00011f10 cf2bdf18 c00f0b44 c004f7e8 cf2bdf18 cf2bdf18
df20: 00011f10 cf2bdf30 00011f10 cf2bdf38 cf401300 cf486100 00000008 c00d2b28
df40: 00011f10 cf401300 00200200 c00d3388 00011f10 cfb63a88 cfb63a80 c00c2f08
df60: 00000000 00000000 cfb63a80 00000000 cf0a3480 00000006 c0033c04 cfb63a80
df80: 00000000 c00c0104 00000003 cf0a3480 cfb63a80 00000000 00000001 00000004
dfa0: 00000058 c0033a80 00000000 00000001 fee1dead 28121969 01234567 00000000
dfc0: 00000000 00000001 00000004 00000058 00000001 00000001 00000000 00000001
dfe0: 4024d200 becf2cb0 00009210 4024d218 60000010 fee1dead 00000000 00000000
[<c02377d8>] (musb_do_idle+0x24/0x138) from [<c005fa34>] (run_timer_softirq+0x1a8/0x26)
[<c005fa34>] (run_timer_softirq+0x1a8/0x26c) from [<c005ac14>] (__do_softirq+0x88/0x13)
[<c005ac14>] (__do_softirq+0x88/0x138) from [<c005ad08>] (irq_exit+0x44/0x98)
[<c005ad08>] (irq_exit+0x44/0x98) from [<c002e07c>] (asm_do_IRQ+0x7c/0xa0)
[<c002e07c>] (asm_do_IRQ+0x7c/0xa0) from [<c0033608>] (__irq_svc+0x48/0xa8)
Exception stack(0xcf2bde20 to 0xcf2bde68)
de20: 00000001 00000000 cf852c14 cf81f200 c045b714 c045b708 cf2bc000 c04a37e8
de40: c0033c04 cf2bc000 00000000 00000001 cf2bde68 cf2bde68 c01c3abc c004f7d8
de60: 60000013 ffffffff
[<c0033608>] (__irq_svc+0x48/0xa8) from [<c004f7d8>] (sub_preempt_count+0x0/0xb8)
Code: ebf86030 e5940098 e594108c e5902010 (e5d13060)
---[ end trace 3689c0d808f9bf7c ]---
Kernel panic - not syncing: Fatal exception in interrupt

Cc: stable@kernel.org
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-02-17 14:34:17 +02:00
Felipe Balbi 5990378b39 usb: musb: fix build breakage
commit 0662481855
(usb: musb: disable double buffering when it's broken),
introduced a compile error when gadget API is disabled.

Fix it.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-02-17 14:34:17 +02:00
Tony Lindgren 9238b6d8e8 Merge branches 'devel-cleanup', 'devel-board', 'devel-early-init' and 'devel-ti816x' into omap-for-linus 2011-02-16 11:32:38 -08:00
Robert Morell c8cf203a1d USB: HCD: Add usb_hcd prefix to exported functions
The convention is to prefix symbols exported from the USB HCD core with
"usb_hcd".  This change makes unmap_urb_setup_for_dma() and
unmap_urb_for_dma() consistent with that.

Signed-off-by: Robert Morell <rmorell@nvidia.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-04 11:48:18 -08:00
Mian Yousaf Kaukab 5f5761cb8e usb: musb: introduce api for dma code to check compatibility with usb request
Gadget MUSB driver handles dma mappings in musb_gadget_queue(). Where as it is
possible for  dma code to reject the usb request later at ->channel_program()
called from txstate()/rxstate()

For example ->channel_program in tusb6010_omap.c:

static int tusb_omap_dma_program(struct dma_channel *channel, u16 packet_sz,
        u8 rndis_mode, dma_addr_t dma_addr, u32 len)
{
...
	if (unlikely(dma_addr & 0x1) || (len < 32) || (len > packet_sz))
		return false;
...
	if (dma_addr & 0x2)
		return false;
...
}

In this case, usb request will be handled in PIO mode which renders dma mapping
operations unnecessary.

This patch adds an api to allow dma code to indicate incompatibility with usb
request. Gadget musb driver call this api, if available, before dma mappings to
avoid any unnecessary mapping operations.

Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-02-01 10:41:30 +02:00
Mian Yousaf Kaukab c65bfa62b7 usb: musb: maintain three states for buffer mappings instead of two
If dma buffers are mapped by a higher layer, with a boolean musb_request.mapped
it is still possible to call dma_sync_single_for_device() from
musb_g_giveback(), even if txstate()/rxstate() has called unmap_dma_buffer()
before falling back to pio mode.

Moreover, check for musb_ep->dma is moved within map_dma_buffer() so where
applicable checks for it are removed. And where possible, checks for
is_dma_capable() are merged with buffer map state check.

Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-02-01 10:41:30 +02:00
Felipe Balbi 0662481855 usb: musb: disable double buffering when it's broken
We know that blackfin doesn't support double
buffering feature as of today. So we add a
flag set by musb_platform_init() to forcefully
disable that feature.

Such flag is created and marked as deprecated
to force us to find a solution for the missing
double buffering support on blackfin.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-02-01 10:41:30 +02:00
Bob Liu 9c668079c8 usb: musb: hsdma: change back to use musb_read/writew
Blackfin platform doesn't support 32bits musbdma registers, so change back to
use musb_read/writew instead of musb_read/writel and simply some format casts.

Signed-off-by: Bob Liu <lliubbo@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-02-01 10:41:30 +02:00
Sergei Shtylyov 541079de88 usb: musb: core: fix IRQ check
musb_probe() only regards 0 as a wrong IRQ number, despite platform_get_irq()
that it calls returns -ENXIO in that case. It leads to musb_init_controller()
calling request_irq() with a negative IRQ number, and when it naturally
fails, the following is printed to the console:

request_irq -6 failed!
musb_init_controller failed with status -19

Fix musb_probe() to filter out the error values as well as 0.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-02-01 10:41:29 +02:00
Ming Lei 456bb1697e usb: musb: fix kernel panic during s2ram(v2)
This patch fixes kernel panic during s2ram, which is caused
by the below:

	- musb is not put into drv data of musb platform device if
	CONFIG_USB_MUSB_HDRC_HCD is defined

	- glue layer driver always get musb instance via platform_get_drvdata.

The patch fixes the issue by always puting musb into drv data
of musb platform device, which is doable even the platform device
is a host controller device.

Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Sergei Shtylyov <sshtylyov@mvista.com>
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-02-01 10:41:29 +02:00
Tony Lindgren 59b479e098 omap: Start using CONFIG_SOC_OMAP
We want to have just CONFIG_ARCH_OMAP2, 3 and 4. The rest
are nowadays just subcategories of these.

Search and replace the following:

ARCH_OMAP2420		SOC_OMAP2420
ARCH_OMAP2430		SOC_OMAP2430
ARCH_OMAP3430		SOC_OMAP3430

No functional changes.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Thomas Weber <weber@corscience.de>
Acked-by: Sourav Poddar <sourav.poddar@ti.com>
2011-01-27 16:39:40 -08:00
Linus Torvalds 008d23e485 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits)
  Documentation/trace/events.txt: Remove obsolete sched_signal_send.
  writeback: fix global_dirty_limits comment runtime -> real-time
  ppc: fix comment typo singal -> signal
  drivers: fix comment typo diable -> disable.
  m68k: fix comment typo diable -> disable.
  wireless: comment typo fix diable -> disable.
  media: comment typo fix diable -> disable.
  remove doc for obsolete dynamic-printk kernel-parameter
  remove extraneous 'is' from Documentation/iostats.txt
  Fix spelling milisec -> ms in snd_ps3 module parameter description
  Fix spelling mistakes in comments
  Revert conflicting V4L changes
  i7core_edac: fix typos in comments
  mm/rmap.c: fix comment
  sound, ca0106: Fix assignment to 'channel'.
  hrtimer: fix a typo in comment
  init/Kconfig: fix typo
  anon_inodes: fix wrong function name in comment
  fix comment typos concerning "consistent"
  poll: fix a typo in comment
  ...

Fix up trivial conflicts in:
 - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c)
 - fs/ext4/ext4.h

Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.
2011-01-13 10:05:56 -08:00
Alexey Dobriyan 57cc7215b7 headers: kobject.h redux
Remove kobject.h from files which don't need it, notably,
sched.h and fs.h.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-10 08:51:44 -08:00
Jiri Kosina 4b7bd36470 Merge branch 'master' into for-next
Conflicts:
	MAINTAINERS
	arch/arm/mach-omap2/pm24xx.c
	drivers/scsi/bfa/bfa_fcpim.c

Needed to update to apply fixes for which the old branch was too
outdated.
2010-12-22 18:57:02 +01:00
Greg Kroah-Hartman 36facadd9e Merge branch 'usb-next' into musb-merge
* usb-next: (132 commits)
  USB: uas: Use GFP_NOIO instead of GFP_KERNEL in I/O submission path
  USB: uas: Ensure we only bind to a UAS interface
  USB: uas: Rename sense pipe and sense urb to status pipe and status urb
  USB: uas: Use kzalloc instead of kmalloc
  USB: uas: Fix up the Sense IU
  usb: musb: core: kill unneeded #include's
  DA8xx: assign name to MUSB IRQ resource
  usb: gadget: g_ncm added
  usb: gadget: f_ncm.c added
  usb: gadget: u_ether: prepare for NCM
  usb: pch_udc: Fix setup transfers with data out
  usb: pch_udc: Fix compile error, warnings and checkpatch warnings
  usb: add ab8500 usb transceiver driver
  USB: gadget: Implement runtime PM for MSM bus glue driver
  USB: gadget: Implement runtime PM for ci13xxx gadget
  USB: gadget: Add USB controller driver for MSM SoC
  USB: gadget: Introduce ci13xxx_udc_driver struct
  USB: gadget: Initialize ci13xxx gadget device's coherent DMA mask
  USB: gadget: Fix "scheduling while atomic" bugs in ci13xxx_udc
  USB: gadget: Separate out PCI bus code from ci13xxx_udc
  ...
2010-12-16 10:05:06 -08:00
Greg Kroah-Hartman 2faa83e2a5 Revert "USB: musb: pm: don't rely fully on clock support"
This reverts commit 32d5dc9520.

Needed to properly merge the musb changes that are in the
usb-next branch into Linus's tree.

Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16 10:04:17 -08:00
Greg Kroah-Hartman 224acb1839 Revert "USB: musb: blackfin: pm: make it work"
This reverts commit 1e393c6eec.

Needed to properly merge the musb changes that are in the
usb-next branch into Linus's tree.

Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16 10:03:27 -08:00
Sergei Shtylyov e4a2b3565f usb: musb: core: kill unneeded #include's
musb_core.c #include's a bunch of ARM and DaVinci specific headers, goodness
knows why -- it happily compiles without them...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-11 12:16:43 +02:00
Hema HK 594632efbb usb: musb: Adding musb support for OMAP4430
OMAP4430 supports UTMI and ULPI types of transceiver interface.

In UTMI mode: The PHY is embedded within OMAP4430. The transceiver functionality
is split between the twl6030 PMIC chip and OMAP4430. The VBUS, ID pin
sensing and OTG SRP generation part is integrated in TWL6030 and UTMI PHY
functionality is embedded within the OMAP4430.

There is no direct interactions between the MUSB controller and TWL6030
chip to communicate the session-valid, session-end and ID-GND events.
It has to be done through a software by setting/resetting bits in
one of the control module register of OMAP4430 which in turn toggles
the appropriate signals to MUSB controller.

musb driver is register for blocking notifications from the transceiver
driver to get the event notifications for connect/disconnect and ID-GND.
Based on these events call the transceiver init/shutdown function to
configure the transceiver to toggle the VBUS valid, session end and ID_GND
signals to musb and power on/off the internal PHY.

For ID_GND event notifications, toggle the ID_GND signal and then wait for
musb to be configured as "A" device, and then call the transceiver function
to set the VBUS.

In OTG mode and musb as a host, When the Micro A connector used, VBUS is turned on
and session bit set. When the device is connected, enumeration goes through.
When the device disconnected from the other end of the connector(ID is still grounded),
link will detect the disconnect and end the session. When the device is connected back,
there are no events generated in the TWL6030-usb, and link is already down.
So the device is not detected. Removed the session bit disable code which
will recognize the connect of the device.

Limitation: In OTG host mode, if device is connected during boot, it does not get
detected. If disconnect and connect it back or connect after boot only it works.
Fix for this, I will submit seperate patch later.

Signed-off-by: Hema HK <hemahk@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10 14:56:31 +02:00
Hema HK 4c42fbc99f usb: musb: TWL6030: Selecting TWL6030_USB transceiver
Selecting the twl6030-usb for OMAP4430SDP and OMAP4PANDA boards and
adding OMAP4 internal phy code for compilation

Signed-off-by: Hema HK <hemahk@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10 14:45:59 +02:00
Mian Yousaf Kaukab 4bc36fd31b usb: musb: add support for ux500 platform
Initial support for u8500 and u5500 platform.

Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10 10:21:36 +02:00
Ajay Kumar Gupta a9c037832e musb: am35x: fix compile error due to control apis
commit 4814ced511 (OMAP:
control: move plat-omap/control.h to mach-omap2/control.h)
moved <plat/control.h> to another location, preventing
drivers from accessing it, so we need to pass function
pointers from arch code to be able to talk to internal
PHY on AM35x.

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10 10:21:35 +02:00
Felipe Balbi 92b48df24e usb: musb: drop board_set_vbus
that's not used anymore. So let's drop it.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10 10:21:33 +02:00
Felipe Balbi 784173723e usb: musb: drop musb_platform_suspend/resume
all glue layers are now fully moved to the
new setup. We are now using dev_pm_ops to
implement suspend/resume functionality and
thus, musb_platform_suspend/resume has become
deprecated and useless.

This patch drops those function pointers and
its uses.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10 10:21:32 +02:00
Felipe Balbi fcd22e3b1f usb: musb: blackfin: usb dev_pm_ops structure
instead of using musb_platform_suspend_resume,
we can use dev_pm_ops and let platform_device
core handle when to call musb_core's suspend and
glue layer's suspend.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10 10:21:31 +02:00
Felipe Balbi 6f783e287c usb: musb: am35x: usb dev_pm_ops structure
instead of using musb_platform_suspend_resume,
we can use dev_pm_ops and let platform_device
core handle when to call musb_core's suspend and
glue layer's suspend.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10 10:21:30 +02:00
Felipe Balbi c20aebb927 usb: musb: omap2430: use dev_pm_ops structure
instead of using musb_platform_suspend/resume,
we can use dev_pm_ops and let the platform_device
core handle when to call musb_core's suspend and
glue layer's suspend.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10 10:21:29 +02:00
Felipe Balbi e6326358a4 usb: musb: omap2430: drop the nops
we don't need those nops, so drop them.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10 10:21:28 +02:00
Felipe Balbi 3c8a5fcc05 usb: musb: mark musb_save/restore_context static
those aren't used outside musb_core.c, so mark
them as static.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10 10:21:27 +02:00
Felipe Balbi 496351413a usb: musb: drop musb_platform_save/restore_context
... that can be easily folded into the
musb_platform_suspend/resume calls.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10 10:21:26 +02:00
Felipe Balbi fa56df915d usb: musb: drop the set_clock magic
now that platform glue layer handles
clock completely, that function is completely
useless for us. Drop it.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10 10:21:25 +02:00
Felipe Balbi 0349176120 usb: musb: move clock handling to glue layer
musb core doesn't need to know about platform
specific details. So start moving clock
handling to platform glue layer and make
musb core agnostic about that.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10 10:21:24 +02:00
Felipe Balbi f7ec94370f usb: musb: pass platform_ops via platform_data
... then we don't need to export any symbols
from glue layer to musb_core.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10 10:21:23 +02:00
Felipe Balbi a023c631f5 usb: musb: blackfin: give it a context structure
that structure currently only holds a device
pointer to our own platform_device and musb's
platform_device, but soon it will hold pointers
to our clock structures and glue-specific bits
and pieces.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10 10:21:22 +02:00
Felipe Balbi e6480faa10 usb: musb: da8xx: give it a context structure
that structure currently only holds a device
pointer to our own platform_device and musb's
platform_device, but soon it will hold pointers
to our clock structures and glue-specific bits
and pieces.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10 10:21:21 +02:00
Felipe Balbi e110de4d53 usb: musb: davinci: give it a context structure
that structure currently only holds a device
pointer to our own platform_device and musb's
platform_device, but soon it will hold pointers
to our clock structures and glue-specific bits
and pieces.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10 10:21:20 +02:00
Felipe Balbi 1add75d2bd usb: musb: tusb6010: give it a context structure
that structure currently only holds a device
pointer to our own platform_device and musb's
platform_device, but soon it will hold pointers
to our clock structures and glue-specific bits
and pieces.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10 10:21:19 +02:00
Felipe Balbi 0919dfc12a usb: musb: am35x: give it a context structure
that structure currently only holds a device
pointer to our own platform_device and musb's
platform_device, but soon it will hold pointers
to our clock structures and glue-specific bits
and pieces.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10 10:21:18 +02:00
Felipe Balbi a3cee12aa9 usb: musb: omap2430: give it a context structure
that structure currently only holds a device
pointer to our own platform_device and musb's
platform_device, but soon it will hold pointers
to our clock structures and glue-specific bits
and pieces.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10 10:21:17 +02:00
Felipe Balbi 9cb0308eec usb: musb: split blackfin to its own platform_driver
Just adding its own platform_driver, not really
using it yet.

Later patches will come to split power management
code from musb_core and move it completely to HW
glue layer.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10 10:21:16 +02:00
Felipe Balbi 8ceae51ed5 usb: musb: split da8xx to its own platform_driver
Just adding its own platform_driver, not really
using it yet.

When all HW glue layers are converted, more patches
will come to split power management code from musb_core
and move it completely to HW glue layer.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10 10:21:16 +02:00
Felipe Balbi 73b089b052 usb: musb: split davinci to its own platform_driver
Just adding its own platform_driver, not really
using it yet.

When all HW glue layers are converted, more patches
will come to split power management code from musb_core
and move it completely to HW glue layer.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10 10:21:15 +02:00
Felipe Balbi 18688fbeb0 usb: musb: split tusb6010 to its own platform_driver
Just adding its own platform_driver, not really
using it yet.

When all HW glue layers are converted, more patches
will come to split power management code from musb_core
and move it completely to HW glue layer.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10 10:21:14 +02:00
Felipe Balbi ce40c5767a usb: musb: split am35x to its own platform_driver
Just adding its own platform_driver, not really
using it yet.

When all HW glue layers are converted, more patches
will come to split power management code from musb_core
and move it completely to HW glue layer.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10 10:21:13 +02:00
Felipe Balbi dc09886bfa usb: musb: split omap2430 to its own platform_driver
Just adding its own platform_driver, not really
using it yet.

When all HW glue layers are converted, more patches
will come to split power management code from musb_core
and move it completely to HW glue layer.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10 10:21:11 +02:00
Felipe Balbi 05ac10dd68 usb: musb: trivial search and replace patch
change all ocurrences of musb_hdrc to musb-hdrc.

We will call glue layer drivers musb-<glue layer>,
so in order to keep things somewhat standard, let's
change the underscore into a dash.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10 10:21:10 +02:00
Felipe Balbi 7c92554642 usb: musb: add Kconfig options for each glue layer
This will make things simpler when choosing which
glue layer to compile. It avoids a lot of magic
around the "default" Kconfig option and lets the
user choose what exactly s/he wants to compile.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10 10:21:09 +02:00
Felipe Balbi 7421107b29 usb: musb: hold context on musb structure
when we start splitting HW glue layer, it's
gonna make it easier to re-use that structure.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10 10:21:08 +02:00
Felipe Balbi 743411b3f3 usb: musb: make all glue layer export struct musb_platform_ops
preparing to a big refactor on musb code. We need
to be able to compile in all glue layers (or at
least all ARM-based ones) together and have a
working binary.

While preparing for that, we move every glue
layer to export only one symbol, which is
a struct musb_platform_ops, and make all
other functions static.

Later patches will come to allow for compiling
all glue layers together and have a working
binary.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-07 09:19:39 +02:00
Felipe Balbi 3ca8abb845 usb: musb: introduce struct musb_platform_ops
This will be passed to musb_core by platform glue
layer in order to make it easier to compile support
for several HW glue layers.

Later patches will come using this structure and
also moving HW glue layers to its own platform
driver; the idea is to be able to handle platform
peculiarities in a manner which doesn't affect one
another.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-07 08:13:25 +02:00
Felipe Balbi 0607f86229 usb: musb: gadget: prevent a NULL pointer dereference
Case we can't allocate struct musb_request,
prevent a NULL pointer dereference by returning
early.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-01 11:03:54 +02:00
Hema Kalliguddi fcf173e451 usb: musb: add names for IRQs in structure resource
Soon resource data will get automatically
populated from a set of autogenerated data
from TI's hardware database for the OMAP
platform.

Such database, might not have resources at
the expected order by the current drivers.

While we could hack in some exceptions to
that tool to generate resources in a specific
order, it seems less fragile to use the
resource name instead. That way, no matter
what order the resources are generated, the
driver still work.

Modified the OMAP, Blackfin and Davinci
architecture files to add the name of the IRQs
in the resource structures and musb driver to
use the platform_get_irq_byname() api to get
the device and dma irq numbers instead of using
the index.

Cc: Tony Lindgren <tony@atomide.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Hema HK <hemahk@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-01 10:56:33 +02:00
Hema Kalliguddi ea65df57c2 usb: musb: remove board_data parameter from musb_platform_init()
Removed the board_data parameter being
passed to musb_platform_init function
as board_data can be extracted from
device structure which is already member
of musb structure.

Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Hema HK <hemahk@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-01 10:56:33 +02:00
Anand Gadiyar 07a8cdd2bb usb: musb: do not use dma for control transfers
The Inventra DMA engine used with the MUSB controller in many
SoCs cannot use DMA for control transfers on EP0, but can use
DMA for all other transfers.

The USB core maps urbs for DMA if hcd->self.uses_dma is true.
(hcd->self.uses_dma is true for MUSB as well).

Split the uses_dma flag into two - one that says if the
controller needs to use PIO for control transfers, and
another which says if the controller uses DMA (for all
other transfers).

Also, populate this flag for all MUSB by default.

(Tested on OMAP3 and OMAP4 boards, with EHCI and MUSB HCDs
simultaneously in use).

Signed-off-by: Maulik Mankad <x0082077@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Cc: Oliver Neukum <oliver@neukum.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Praveena NADAHALLY <praveen.nadahally@stericsson.com>
Cc: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-11-22 12:55:02 +02:00
Ajay Kumar Gupta bb324b0816 usb: musb: gadget: fix compilation warning
Fixes below compilation warning when musb driver is compiled for
PIO mode:

drivers/usb/musb/musb_gadget.c: In function 'musb_g_rx':
drivers/usb/musb/musb_gadget.c:840:
		warning: label 'exit' defined but not used

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-11-22 12:42:09 +02:00
Ming Lei e75df37165 usb: musb: clear RXCSR_AUTOCLEAR before PIO read
If RXCSR_AUTOCLEAR flag is not cleard before PIO reading, one packet
may be recieved by musb fifo, but no chance to notify
software, so cause packet loss, follows the detailed process:

	- PIO read one packet
	- musb fifo auto clear the MUSB_RXCSR_RXPKTRDY
	- musb continue to recieve the next packet, and MUSB_RXCSR_RXPKTRDY
	is set
	- software clear the MUSB_RXCSR_RXPKTRDY, so there is no chance for
	musb to notify software that the 2nd recieved packet.

The patch does fix the g_ether issue below:

	- use fifo_mode 3 to enable double buffer
	- 'ping -s 1024 IP_OF_BEAGLE_XM'
	- one usb packet of 512 byte is lost, so ping failed,
	which can be observed by wireshark

note:
	Beagle xm takes musb rtl1.8 and may fallback to pio mode
	for unaligned buffer.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-11-22 12:36:49 +02:00
Hema Kalliguddi 92d2711f5d usb: musb: unmap dma buffer when switching to PIO
Buffer is mapped to dma when dma channel is
allocated. If, for some reason, dma channel
programming fails, musb code will fallback
to PIO mode to transfer that request. In
that case, we need to unmap the buffer
back to CPU.

MUSB RTL1.8 and above cannot handle buffers
which are not 32bit aligned. That happens to
every request sent by g_ether gadget
driver. Since the buffer sent was unaligned,
we need to fallback to PIO.

Because of that, g_ether was failing due
to missing buffer unmapping.

With this patch and [1] g_ether works fine
with all MUSB revisions.

Verified with OMAP3630 board, which has
MUSB RTL1.8 using g_ether and g_zero.

[1] http://www.spinics.net/lists/linux-usb/msg38400.html

Signed-off-by: Hema HK <hemahk@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-11-22 12:36:48 +02:00
Anand Gadiyar 6e16edfe62 usb: musb: fail unaligned DMA transfers on v1.8 and above
The Inventra DMA engine in version 1.8 and later of the MUSB
controller cannot handle DMA addresses that are not aligned
to a 4 byte boundary. It ends up ignoring the last two bits
programmed in the DMA_ADDR register. This is a deliberate
design change in the controller and is documented in the
programming guide.

Earlier versions of the controller could handle these
accesses just fine.

Fail dma_channel_program if we see an unaligned address when
using the newer controllers, so that the caller can carry out
the transfer using PIO mode.
(Current callers already have this backup path in place).

Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Tested-by: Ming Lei <tom.leiming@gmail.com>
Cc: Ajay Kumar Gupta <ajay.gupta@ti.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-11-09 10:24:35 +02:00
Sergei Shtylyov 0739702105 usb: musb: gadget: kill duplicate code in musb_gadget_queue()
musb_gadget_queue() checks for '!req->buf' condition twice:
in the second case the code is both duplicated and unreachable
as the first check returns early.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-11-08 09:29:55 +02:00
Heikki Krogerus 19aab56c7f usb: musb: Fix handling of spurious SESSREQ
Rely on VBUS being valid on top off B device.

Signed-off-by: Heikki Krogerus <heikki.krogerus@nokia.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-11-05 14:17:35 +02:00
Ming Lei b212091474 usb: musb: fix kernel oops when loading musb_hdrc module for the 2nd time
musb driver still may write MUSB_DEVCTL register after clock is disabled
in musb_platform_exit, which may cause the kernel oops[1] when musb_hdrc
module is loaded for the 2nd time.

The patch fixes the kernel oops in this case.

[1] kernel oops when loading musb_hdrc module for the 2nd time

[   93.380279] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=5
[   93.387847] bus: 'platform': add driver musb_hdrc
[   93.388153] bus: 'platform': driver_probe_device: matched device musb_hdrc with driver musb_hdrc
[   93.388183] bus: 'platform': really_probe: probing driver musb_hdrc with device musb_hdrc
[   93.405090] HS USB OTG: revision 0x33, sysconfig 0x2010, sysstatus 0x1, intrfsel 0x1, simenable  0x0
[   93.405364] musb_hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[   93.405395] musb_hdrc: MHDRC RTL version 1.400
[   93.405426] musb_hdrc: setup fifo_mode 3
[   93.405456] musb_hdrc: 7/31 max ep, 3648/16384 memory
[   93.405487] musb_core_init 1524: musb_hdrc: hw_ep 0shared, max 64
[   93.405487] musb_core_init 1524: musb_hdrc: hw_ep 1tx, doublebuffer, max 512
[   93.405517] musb_core_init 1533: musb_hdrc: hw_ep 1rx, doublebuffer, max 512
[   93.405548] musb_core_init 1524: musb_hdrc: hw_ep 2tx, max 512
[   93.405578] musb_core_init 1533: musb_hdrc: hw_ep 2rx, max 512
[   93.405578] musb_core_init 1524: musb_hdrc: hw_ep 3shared, max 256
[   93.405609] musb_core_init 1524: musb_hdrc: hw_ep 4shared, max 256
[   93.405853] musb_platform_try_idle 133: b_idle inactive, for idle timer for 7 ms
[   93.405944] device: 'gadget': device_add
[   93.406921] PM: Adding info for No Bus:gadget
[   93.406951] musb_init_controller 2136: OTG mode, status 0, dev80
[   93.407379] musb_do_idle 51: musb_do_idle: state=1
[   93.408233] musb_hdrc musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
[   93.416656] driver: 'musb_hdrc': driver_bound: bound to device 'musb_hdrc'
[   93.416687] bus: 'platform': really_probe: bound device musb_hdrc to driver musb_hdrc
[  124.486938] bus: 'platform': remove driver musb_hdrc
[  124.490509] twl4030_usb twl4030_usb: twl4030_phy_suspend
[  124.491424] device: 'gadget': device_unregister
[  124.491424] PM: Removing info for No Bus:gadget
[  124.495269]  gadget: musb_gadget_release
[  124.498992] driver: 'musb_hdrc': driver_release
[  129.569366] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=5
[  129.576934] bus: 'platform': add driver musb_hdrc
[  129.577209] bus: 'platform': driver_probe_device: matched device musb_hdrc with driver musb_hdrc
[  129.577239] bus: 'platform': really_probe: probing driver musb_hdrc with device musb_hdrc
[  129.592651] twl4030_usb twl4030_usb: twl4030_phy_resume
[  129.592681] Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa0ab404
[  129.600830] Internal error: : 1028 []
[  129.604858] last sysfs file: /sys/devices/platform/i2c_omap.3/i2c-3/i2c-dev/i2c-3/dev
[  129.613067] Modules linked in: musb_hdrc(+) [last unloaded: musb_hdrc]
[  129.619964] CPU: 0    Not tainted  (2.6.36-next-20101021+ )
[  129.626281] PC is at musb_platform_init+0xb0/0x1c8 [musb_hdrc]
[  129.632415] LR is at mark_held_locks+0x64/0x94
[  129.637084] pc : [<bf032198>]    lr : [<c00ad7c4>]    psr: 20000013
[  129.637084] sp : c6d5fcb0  ip : c6d5fc38  fp : c6d5fcd4
[  129.649139] r10: c6e72180  r9 : fa0ab000  r8 : c05612e8
[  129.654602] r7 : 0000005c  r6 : c0559cc8  r5 : c6e72180  r4 : c0561548
[  129.661468] r3 : 04d60047  r2 : fa0ab000  r1 : c07169d8  r0 : 00000000
[  129.668304] Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
[  129.675811] Control: 10c5387d  Table: 86e4c019  DAC: 00000015
[  129.681823] Process insmod (pid: 554, stack limit = 0xc6d5e2f0)
[  129.688049] Stack: (0xc6d5fcb0 to 0xc6d60000)
[  129.692626] fca0:                                     fa0ab000 c0555c54 c6d5fcd4 c0561548
[  129.701202] fcc0: 00000003 c05612e0 c6d5fe04 c6d5fcd8 bf03140c bf0320f4 c6d5fd9c c6d5fce8
[  129.709808] fce0: c015cb94 c041448c c06d9d10 ffffffff c6d5fd14 c6d5fd00 c00adbec c6d5fd40
[  129.718383] fd00: c015d478 c6d5fdb0 c6d5fd24 c00a9d18 c6d5e000 60000013 bf02a4ac c05612bc
[  129.726989] fd20: c0414fb4 c00a9cf0 c6d5fd54 c6d5fd38 c015bbdc c0244280 c6e8b7b0 c7929330
[  129.735565] fd40: c6d5fdb0 c6d5fdb0 c6d5fd7c c6e7227c c015c010 c015bb90 c015c2ac c6d5fdb0
[  129.744171] fd60: c7929330 c6d5fdb0 c7929330 c6e8b7b0 c6d5fd9c 00000000 c7929330 c6e8b7b0
[  129.752746] fd80: c6d5fdb0 00000000 00000001 00000000 c6d5fde4 c6d5fda0 c015d478 c015cb74
[  129.761322] fda0: c056138c 00000000 c6d5fdcc c6d5fdb8 c7929330 00000000 c056138c c05612e8
[  129.769927] fdc0: 00000000 c05612f0 c0c5d62c c06f6e00 c73217c0 00000000 c6d5fdf4 c05612e8
[  129.778503] fde0: c05612e8 bf02a2e4 c0c5d62c c06f6e00 c73217c0 00000000 c6d5fe14 c6d5fe08
[  129.787109] fe00: c029a398 bf0311c8 c6d5fe4c c6d5fe18 c0299120 c029a384 c7919140 22222222
[  129.795684] fe20: c6d5fe4c c05612e8 c056131c bf02a2e4 c0299278 c06f6e00 c73217c0 00000000
[  129.804290] fe40: c6d5fe6c c6d5fe50 c0299314 c0299020 00000000 c6d5fe70 bf02a2e4 c0299278
[  129.812866] fe60: c6d5fe94 c6d5fe70 c02987d4 c0299284 c7825060 c78c6618 00000000 bf02a2e4
[  129.821441] fe80: c06e4c98 00000000 c6d5fea4 c6d5fe98 c0298ea4 c0298778 c6d5fedc c6d5fea8
[  129.830047] fea0: c0297f84 c0298e8c bf02716c 000b9008 bf02a2e4 bf02a2d0 000b9008 bf02a2e4
[  129.838623] fec0: 00000000 c06f6e00 bf031000 00000000 c6d5fefc c6d5fee0 c0299614 c0297ec0
[  129.847229] fee0: bf02a2d0 000b9008 bf02a388 00000000 c6d5ff0c c6d5ff00 c029a868 c02995a8
[  129.855804] ff00: c6d5ff24 c6d5ff10 c029a88c c029a818 0010281c 000b9008 c6d5ff34 c6d5ff28
[  129.864410] ff20: bf03104c c029a878 c6d5ff7c c6d5ff38 c00463dc bf03100c 00000000 00000000
[  129.872985] ff40: 00000000 0010281c 000b9008 bf02a388 00000000 0010281c 000b9008 bf02a388
[  129.881591] ff60: 00000000 c00521c8 c6d5e000 00000000 c6d5ffa4 c6d5ff80 c00bb9b8 c00463ac
[  129.890167] ff80: c00adc88 c00ada68 00097e8e bebbfcf4 0010281c 00000080 00000000 c6d5ffa8
[  129.898742] ffa0: c0052000 c00bb908 00097e8e bebbfcf4 402c9008 0010281c 000b9008 bebbfe5a
[  129.907348] ffc0: 00097e8e bebbfcf4 0010281c 00000080 00000014 bebbfcf4 bebbfe06 0000005b
[  129.915924] ffe0: bebbf9a0 bebbf990 0001a108 40263ec0 60000010 402c9008 011b0000 0000007c
[  129.924499] Backtrace:
[  129.927185] [<bf0320e8>] (musb_platform_init+0x0/0x1c8 [musb_hdrc]) from [<bf03140c>] (musb_probe+0x250/0xf2c [musb_hdrc])
[  129.938781]  r6:c05612e0 r5:00000003 r4:c0561548
[  129.943695] [<bf0311bc>] (musb_probe+0x0/0xf2c [musb_hdrc]) from [<c029a398>] (platform_drv_probe+0x20/0x24)
[  129.954040] [<c029a378>] (platform_drv_probe+0x0/0x24) from [<c0299120>] (driver_probe_device+0x10c/0x264)
[  129.964172] [<c0299014>] (driver_probe_device+0x0/0x264) from [<c0299314>] (__driver_attach+0x9c/0xa0)
[  129.973968] [<c0299278>] (__driver_attach+0x0/0xa0) from [<c02987d4>] (bus_for_each_dev+0x68/0x94)
[  129.983367]  r7:c0299278 r6:bf02a2e4 r5:c6d5fe70 r4:00000000
[  129.989349] [<c029876c>] (bus_for_each_dev+0x0/0x94) from [<c0298ea4>] (driver_attach+0x24/0x28)
[  129.998565]  r7:00000000 r6:c06e4c98 r5:bf02a2e4 r4:00000000
[  130.004547] [<c0298e80>] (driver_attach+0x0/0x28) from [<c0297f84>] (bus_add_driver+0xd0/0x274)
[  130.013671] [<c0297eb4>] (bus_add_driver+0x0/0x274) from [<c0299614>] (driver_register+0x78/0x158)
[  130.023101] [<c029959c>] (driver_register+0x0/0x158) from [<c029a868>] (platform_driver_register+0x5c/0x60)
[  130.033325]  r7:00000000 r6:bf02a388 r5:000b9008 r4:bf02a2d0
[  130.039276] [<c029a80c>] (platform_driver_register+0x0/0x60) from [<c029a88c>] (platform_driver_probe+0x20/0xa8)
[  130.050018] [<c029a86c>] (platform_driver_probe+0x0/0xa8) from [<bf03104c>] (musb_init+0x4c/0x54 [musb_hdrc])
[  130.060424]  r5:000b9008 r4:0010281c
[  130.064239] [<bf031000>] (musb_init+0x0/0x54 [musb_hdrc]) from [<c00463dc>] (do_one_initcall+0x3c/0x1c0)
[  130.074218] [<c00463a0>] (do_one_initcall+0x0/0x1c0) from [<c00bb9b8>] (sys_init_module+0xbc/0x1d0)
[  130.083709] [<c00bb8fc>] (sys_init_module+0x0/0x1d0) from [<c0052000>] (ret_fast_syscall+0x0/0x3c)
[  130.093109]  r7:00000080 r6:0010281c r5:bebbfcf4 r4:00097e8e
[  130.099090] Code: 0a000046 e3a01001 e12fff33 e59520e4 (e5923404)
[  130.105621] ---[ end trace 1d0bd69deb79164d ]---

Cc: Ajay Kumar Gupta <ajay.gupta@ti.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Anand Gadiyar <gadiyar@ti.com>
Cc: stable@kernel.org
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-11-05 14:16:32 +02:00
Bob Liu 9c7564620f USB: musb: blackfin: push clkin value to platform resources
In order to not touch the driver file for different xtal usage,
push the clkin value to board file and calculate the register
value instead of hardcoding it.

Signed-off-by: Bob Liu <lliubbo@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-11-05 14:13:32 +02:00
Bob Liu 68f64714dc USB: musb: blackfin: fix dynamic device<->host changing
We need to restart the timer in order to recognize USB devices in
host-only mode.

Signed-off-by: Bob Liu <lliubbo@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-11-05 14:12:22 +02:00
Bob Liu 1e393c6eec USB: musb: blackfin: pm: make it work
Split the USB MMR init steps out into a helper func that both the platform
init and the resume code may call.

Then while suspending, the gpio_vrsel will change from high to low which
will generate a wakeup event and resume the system immediately, so we need
to manually drive it low before we sleep.

Signed-off-by: Bob Liu <lliubbo@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-11-05 14:10:57 +02:00
Bob Liu 32d5dc9520 USB: musb: pm: don't rely fully on clock support
Since clock support is optional across processors, don't make the whole
musb pm paths depend upon it.  Just conditionalize the clock accesses.

Signed-off-by: Bob Liu <lliubbo@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-11-05 14:08:15 +02:00
Ian Jeffray 5d726f5add USB: musb: blackfin: fix musb_read_txhubport() definition
The new MUSB power code needs musb_read_txhubport() to
return a value (so stub it as 0 like the other Blackfin
hub funcs).

Signed-off-by: Ian Jeffray <ian@jeffray.co.uk>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-11-05 13:59:32 +02:00
Ming Lei 31c9909b51 USB: musb: gadget: fix MUSB_TXMAXP and MUSB_RXMAXP configuration
Commit 9f445cb29918dc488b7a9a92ef018599cce33df7[USB: musb: disable
double buffering for older RTL versions] tries to disable double
buffer mode by writing endpoint hw max packet size to TXMAP/RXMAP.

First the approach can break full speed and cause overflow problems.
We should always set those registers with the actual max packet size
from endpoint descriptor.

Second, the problem describe by commit 9f445cb299
was caused by musb gadget driver; nothing to do with RTL revision as
originaly suspected.

The real fix to the problem is to always use actual max packet
size from endpoint descriptor to config TXMAP/RXMAP registers.

Cc: Cliff Cai <cliff.cai@analog.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Anand Gadiyar <gadiyar@ti.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: stable@kernel.org
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-11-05 13:56:17 +02:00
Grazvydas Ignotas 120d074c58 usb: musb: don't leave PHY enabled on shutdown()
Some actions like musb_platform_exit are only performed on module
removal and not on shutdown, which results in PHY being left enabled
on reboot at least. This is sometimes causing strange failures after
reboot (observed on OMAP3 pandora board), when DEVCTL does not report
VBUS state correctly due to unknown reasons (possibly because of
communication issues between musb IP and PHY). Running
musb_platform_exit before reset seems to resolve that issue.

Move some exit code from musb_remove() to musb_shutdown() so that it
is performed on both module removal and shutdown/reset. Also convert
the host check so that it doesn't need #ifdef.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-11-05 13:48:09 +02:00
Rahul Ruikar e2c3404523 usb: musb: musb_gadget: fix resource leakage in error path
In function musb_gadget_setup() call put_device()
when device_register() fails.

Signed-off-by: Rahul Ruikar <rahul.ruikar@gmail.com>
Acked-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-11-05 13:43:14 +02:00
Ming Lei 9001d80df9 usb: musb: gadget: fix dma mode 0 in double buffer Rx case
1, In Rx double buffer case, FIFO may have two packets, so
rxstate should be called to unload fifo if RXPKTRDY is set
even the current request has not been completed.

2, Commit 633ba7876b96ec339ef685357e2f7c60b5a8ce85
introduces autoclear to support double buffer in dma mode 0,
so remove clearing RXPKTRDY manually for dma mode 0.

3, Commit c7af6b29ffeffbeb28caf39e5b2ce29b11807c7d may break
dma mode 1 for non-doublebuffer endpoint, fix it.

With this patch, either usbtest  or g_file_storage(writing
file to device in usb host) or g_ether have been tested OK in
double buffer case(using fifo mode 3). Also, this patch has
been verified that single buffer case can't be broken.

Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Anand Gadiyar <gadiyar@ti.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-11-05 13:42:31 +02:00
Uwe Kleine-König b595076a18 tree-wide: fix comment/printk typos
"gadget", "through", "command", "maintain", "maintain", "controller", "address",
"between", "initiali[zs]e", "instead", "function", "select", "already",
"equal", "access", "management", "hierarchy", "registration", "interest",
"relative", "memory", "offset", "already",

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-01 15:38:34 -04:00