The driver core ignores the return value of mei_cl_device_remove() so
passing an error value doesn't solve any problem. As most mei drivers'
remove callbacks return 0 unconditionally and returning a different value
doesn't have any effect, change this prototype to return void and return 0
unconditionally in mei_cl_device_remove(). The only driver that could
return an error value is modified to emit an explicit warning in the error
case.
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Link: https://lore.kernel.org/r/20210208073705.428185-3-uwe@kleine-koenig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver core only calls a bus' remove function when there is actually
a driver and a device. So drop the needless check and assign cldrv earlier.
(Side note: The check for cldev being non-NULL is broken anyhow, because
to_mei_cl_device() is a wrapper around container_of() for a member that is
not the first one. So cldev only can become NULL if dev is (void *)0xc
(for archs with 32 bit pointers) or (void *)0x18 (for archs with 64 bit
pointers).)
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Link: https://lore.kernel.org/r/20210208073705.428185-2-uwe@kleine-koenig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Graph Compiler uses DMA5 in a non-standard way and it requires the
driver to disable clock gating on that DMA.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
When user gives us a block address to get its ID to mmap it, he also
needs to get from us the block size to pass to the driver in the mmap
function.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
when reading CPU_BOOT_DEV_STS0 reg after FW reports SRAM AVAILABLE the
value in the register might not yet be updated by FW.
to overcome this issue another "up-to-date" read of this register is
done at the end of CPU queues init.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Only after the initialization of the device is done, the driver is
ready to receive events from the F/W. The driver can't handle events
before that because of races so it will ignore events. In case of
a fatal event, the driver won't know about it and the device will be
operational although it shouldn't be.
Same logic should be applied after hard-reset.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
driver should use ECC info from FW only if HBM ECC CAP is set.
otherwise, try to fetch the data from MC regs only if security is
disabled.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
User must be aware of the available CQs when it needs to use them.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Current messaging communictaion protocol with cpucp can get out
of sync due to coherency issues. In order to improve the protocol
reliability, we modify the protocol to expect a different
acknowledgment for every packet sent to cpucp.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Implement HBM message protocol to setup and tear down
DMA buffer on behalf of an client. On top there DMA
buffer allocation and its life time management.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20210206144325.25682-5-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Client DMA capability indicates whether the firmware supports setting up
a direct DMA channel between the host and me client.
The DMA capabilities are supported from firmware HBM version 2.2
and newer.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20210206144325.25682-3-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce new intermediate state to allow the clients on the bus
to communicate with the firmware from the remove handler.
This is to enable to perform a clean shutdown.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20210206144325.25682-2-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the following coccicheck warning:
./drivers/misc/cxl/sysfs.c:181:48-53: WARNING: conversion to bool not
needed here
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/1611908705-98507-1-git-send-email-yang.lee@linux.alibaba.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Add feature called "staged command submissions". In this feature,
the driver allows the user to submit multiple command submissions
that describe a single pass on the deep learning graph. The driver
tracks the completion of the entire pass by the last stage CS.
- Update code to support the latest firmware image
- Optimizations and improvements to MMU code:
- Support page size that is not power-of-2
- Make the locks scheme simpler
- mmap areas in device configuration space to userspace
- Security fixes:
- Make ETR non-secured
- Remove access to kernel memory through debug-fs interface
- Remove access through PCI bar to SyncManager register block
in Gaudi
- Many small bug fixes
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEE7TEboABC71LctBLFZR1NuKta54AFAmARvmgTHG9nYWJiYXlA
a2VybmVsLm9yZwAKCRBlHU24q1rngJ67B/9eSEhEXDoYVXjdt0qebOf2sAI65csq
ZZ5FXcnkQHjStytpSfBTztlz1fvRF9sged7Kta98Bl+H70JqebzRhv076ZDT5IEs
0DI//FoMYIShItTtFwgjINU8QGBww42Cod4SXNJ6wpRBrIhtBQF3Yn9XpWA7nesY
ido3O7Vf73mU+gCA+mj1TBkhmGg+tZ8c1rwhItBkNYjU9mQwSZSEY/fGwtadwsB/
GECYAu3ekZn/RmUC9YvJ68o6b/CLpAmOGSqcOsj6mRzL9CsI73KuVU23N0plnLaX
kuCCSLRZb2AbNnj5u7Hp7FvwBa8LVlxYRsCKbTJ9KXpmSlbrj67I4sHw
=cqv6
-----END PGP SIGNATURE-----
Merge tag 'misc-habanalabs-next-2021-01-27' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into char-misc-next
Oded writes:
This tag contains habanalabs driver changes for v5.12:
- Add feature called "staged command submissions". In this feature,
the driver allows the user to submit multiple command submissions
that describe a single pass on the deep learning graph. The driver
tracks the completion of the entire pass by the last stage CS.
- Update code to support the latest firmware image
- Optimizations and improvements to MMU code:
- Support page size that is not power-of-2
- Make the locks scheme simpler
- mmap areas in device configuration space to userspace
- Security fixes:
- Make ETR non-secured
- Remove access to kernel memory through debug-fs interface
- Remove access through PCI bar to SyncManager register block
in Gaudi
- Many small bug fixes
* tag 'misc-habanalabs-next-2021-01-27' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux: (41 commits)
habanalabs: update to latest hl_boot_if.h spec from F/W
habanalabs/gaudi: unmask HBM interrupts after handling
habanalabs: update SyncManager interrupt handling
habanalabs: fix ETR security issue
habanalabs: staged submission support
habanalabs: modify device_idle interface
habanalabs: add CS completion and timeout properties
habanalabs: add new mem ioctl op for mapping hw blocks
habanalabs: fix MMU debugfs related nodes
habanalabs: add user available interrupt to hw_ip
habanalabs: always try to use the hint address
CREDITS: update email address and home address
habanalabs: update email address in sysfs/debugfs docs
habanalabs: add security violations dump to debugfs
habanalabs: ignore F/W BMC errors in case no BMC present
habanalabs/gaudi: print sync manager SEI interrupt info
habanalabs: Use 'dma_set_mask_and_coherent()'
habanalabs/gaudi: remove PCI access to SM block
habanalabs: add driver support for internal cb scheduling
habanalabs: increment ctx ref from within a cs allocation
...
Correct compile issue if CONFIG_TTY is not set by
only adding ttyVK devices if CONFIG_BCM_VK_TTY is set.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Link: https://lore.kernel.org/r/20210203223826.21674-1-scott.branden@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes unneeded return variables, using only
'0' instead.
It fixes the following warning detected by coccinelle:
./drivers/misc/cardreader/rtsx_pcr.c:1808:5-8: Unneeded variable: "ret".
Return "0" on line 1833.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/1612164640-84541-1-git-send-email-yang.lee@linux.alibaba.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A local variable was used only within an if branch.
Thus move the definition for the variable “mm” into the corresponding
code block.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5cee2b25-71e0-15aa-fba6-12211b8308aa@web.de
mutex lock can be initialized automatically with DEFINE_MUTEX()
rather than explicitly calling mutex_init().
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201224132446.31286-1-zhengyongjun3@huawei.com
Ignore and drop HBM responses from init phase in shutdown phase.
Fixes stall if driver starting to stop in the middle of link init.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20210129120752.850325-4-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use mei_set_devstate() wrapper upon hbm stop command response,
to trigger sysfs event.
Fixes: 43b8a7ed47 ("mei: expose device state in sysfs")
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20210129120752.850325-3-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The size in header field for packet transferred over DMA
includes size of the extended header.
Include extended header in size check.
Add size and sanity checks on extended header.
Cc: <stable@vger.kernel.org> # v5.10+
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20210129120752.850325-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change set_q_num API to use if-else to make it more explicit,
and avoid a precedence rule issue.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Desmond Yan <desmond.yan@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Link: https://lore.kernel.org/r/20210129060403.14801-1-scott.branden@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Fix DP vswing settings and handling (Imre, Ville)
- Various display code clean-up (Jani, Ville)
- Various display refactoring, including split out of pps, aux, and fdi (Ja\
ni, Dave)
- Add DG1 missing workarounds (Jose)
- Fix display color conversion (Chris, Ville)
- Try to guess PCH type even without ISA bridge (Zhenyu)
- More backlight refactor (Lyude)
- Support two CSC module on gen11 and later (Lee)
- Async flips for all ilk+ platforms (Ville)
- Clear color support for TGL (RK)
- Add a helper to read data from a GEM object page (Imre)
- VRR/Adaptive Sync Enabling on DP/eDP for TGL+ (Manasi, Ville Aditya)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmARc1oACgkQ+mJfZA7r
E8ovFAgAhBlnhrquGrgtuRmS5tkpLQShqiwrPv7ogDBkcayJ6Is+AO+FoE8kuzZO
q/TW2enkcRKFHhQnm9RA0Ayk+rwYqkEOcBU5gvzusdwbEjkygJfH/yA2ukAmaw32
QxP9A2pW+iWsEcqtMuOEu1ahu0Z8gnkCe8DakuBMf/0y5D9DairwaCC8nyZQdEJq
YFTxp+pILE57PhOVbKS3EZPbnl5t28NgCtMc8hjlPTWZxRSVV0eDrY2tx9vyhFhU
Eq8aLDxPKCRm18sg+J+lDytOvFoljXcglAEwPODVMmDNolG8R6aRQ9T6tG6qfxyI
UO1KyeYUHHEIJ4IBJKK+KWeUWLLBhA==
=3Jc8
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2021-01-27' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- HDCP 2.2 and HDCP 1.4 Gen12 DP MST support (Anshuman)
- Fix DP vswing settings and handling (Imre, Ville)
- Various display code clean-up (Jani, Ville)
- Various display refactoring, including split out of pps, aux, and fdi (Ja\
ni, Dave)
- Add DG1 missing workarounds (Jose)
- Fix display color conversion (Chris, Ville)
- Try to guess PCH type even without ISA bridge (Zhenyu)
- More backlight refactor (Lyude)
- Support two CSC module on gen11 and later (Lee)
- Async flips for all ilk+ platforms (Ville)
- Clear color support for TGL (RK)
- Add a helper to read data from a GEM object page (Imre)
- VRR/Adaptive Sync Enabling on DP/eDP for TGL+ (Manasi, Ville Aditya)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210127140822.GA711686@intel.com
As the driver does with all interrupts, we need to tell F/W to unmask
the HBM interrupts after the driver handled them.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The firmware provides more information about SyncManager events.
Adjust the code to the latest firmware interface file.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
ETR should always be non-secured as it is used by the users to record
profiling/trace data.
This patch fixes the configuration to match those requirements.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
We introduce a new mechanism named Staged Submission.
This mechanism allows the user to send a whole CS in pieces.
Each CS will not require completion rather than the
last CS. Timeout timer will be triggered upon reception of the first
CS in group.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Currently this API uses single 64 bits mask for engines idle indication.
Recently, it was observed that more bits are needed for some ASICs.
This patch modifies the use of the idle mask and the idle_extensions
mask.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In order to support staged submission feature, we need to
distinguish on which command submission we want to receive
timeout and for which we want to receive completion.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
For future ASIC support the driver allows user to map certain regions
in the device's configuration space for direct access from userspace.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In mmu debugfs node show un-scrambled physical addresses.
before read/write through data nodes, need to unscramble the
physical address before using it for pci transaction.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In order to support completions that arrive directly to the user,
the driver needs to supply the user with the first available msix
interrupt available.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Currently hint address is ignored in case va block page size
is not power of 2. We need to support th user hint address also in this
case, but only if the hint address is aligned to page size.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In order to support operation mode in which BMC is not active,
driver must not take BMC errors into consideration.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Driver must print sync manager SEI information upon receiving
interrupt from FW.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Axe 'hl_pci_set_dma_mask()' and replace it with an equivalent
'dma_set_mask_and_coherent()' call.
This makes the code a bit less verbose.
It also removes an erroneous comment, because 'hl_pci_set_dma_mask()'
does not try to use a fall-back value.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Due to HW limitation we must remove all direct access to SM
registers, in order to do that we will access SM registers using
the HW QMANS.
When possible and no user context is present, we can directly access
the HW QMANS. Whenever there is an active user, driver will
prepare a pending command buffer list which will be sent upon
user submissions.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In order to support scnenarios in which driver needs access to
HW components but it cannot access them directly, we add support for
scheduling command buffers internally.
These command buffers will be transmitted upon next user command
submission context.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
A CS must increment the relevant context reference count.
We want to increment the reference inside the CS allocation function
as opposed for today where we increment it outside.
This is logical since we want to avoid explicitly incrementing
the context every time we call the CS allocate function.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
We separate some of the common code source files to different
folders for a better maintainability and testability.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Boot cpu can report errors in various boot stages.
Current implementaion does not take into consideration errors
reported in late stages, hence we will check for errors at the most
late stage when fetching cpucp information.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In case MMU is enabled, we must take MMU page size into
consideration when reporting dram size to the user.
This is because the MMU page size can be a value which is NOT
a power-of-2 value. As a result, the total DRAM size (which is always
a power-of-2 value) needed to be rounded-down.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
DRAM physical page sizes depend of the amount of HBMs available in
the device. this number is device-dependent and may also be subject
to binning when one or more of the DRAM controllers are found to
to be faulty. Such a configuration may lead to partitioning the DRAM
to non-power-of-2 pages.
To support this feature we also need to add infrastructure of address
scarmbling.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Accessing kernel allocated memory through debugfs should not
be allowed as it introduces a security vulnerability.
We remove the option to read/write kernel memory for all asics.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Initialize local variable that is returned by the function, in
case it is never assigned.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
When working with DRAM MMU, we should supply the userspace with the
virtual start address of the DRAM instead of the physical one. This
is because the physical one has no meaning for the user as he only
knows the virtual address range.
Signed-off-by: Alon Mizrahi <amizrahi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In order to have more information while debugging boot issues,
we should print the firmware security status at every boot stage.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
For consistency, modify all memory ioctl functions to get the ioctl
arguments structure rather than the arguments themselves.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Often WARN is defined in data-centers as BUG and we would like to
avoid hanging the entire server on some internal error of the driver
(important as it might be).
Therefore, use dev_crit instead.
Signed-off-by: Alon Mizrahi <amizrahi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Instead of having it hard-coded as a define, pass it to the user
in runtime.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Currently mmu_prepare is located at context switch.
Since we support a single context, no reason to reconfigure
the MMU registers every context switch.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
As all packets use the same CTL register masks, we remove duplicated
masks and use common masks instead.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In order to support the staged submission feature, user must be
allowed to use the same CS sequence for all submissions in the
same staged submission.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
As part of the staged submission feature, we need Gaudi to support
command submissions that will never get a completion.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In order for reserving VA ranges for kernel memory, we need
to allow the VM module to be initiated with kernel context.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
remove mmu_cache_lock as it protects a section which is already
protected by mmu_lock.
in addition, wrap mmu cache invalidate calls in hl_vm_ctx_fini with
mmu_lock.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Suggested by Paolo & Greg, add 'events' device attribute that can be
used to limit which capabilities the driver uses.
Finally, the pvpanic guest driver works by the limitation of both
device capability and user setting.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20210110115358.79100-3-pizhenwei@bytedance.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to pvpanic spec:
https://git.qemu.org/?p=qemu.git;a=blob_plain;f=docs/specs/pvpanic.txt
The guest should determine pvpanic capability by RDPT, so initialize
capability during device probing. There is no need to register panic
notifier callback function if no events supported.
Before sending event to host side, check capability firstly.
Suggested by Greg KH, use sysfs to expose capability to user space,
also add new sysfs attribute in document.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20210110115358.79100-2-pizhenwei@bytedance.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Intel Moorestown and Medfield are quite old Intel Atom based
32-bit platforms, which were in limited use in some Android phones,
tablets and consumer electronics more than eight years ago.
There are no bugs or problems ever reported outside from Intel
for breaking any of that platforms for years. It seems no real
users exists who run more or less fresh kernel on it. The commit
05f4434bc1 ("ASoC: Intel: remove mfld_machine") also in align
with this theory.
Due to above and to reduce a burden of supporting outdated drivers
we remove the support of outdated platforms completely.
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210122114358.39299-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This change fixes the checkpatch warning described in this commit
commit cbacb5ab0a ("docs: printk-formats: Stop encouraging use of
unnecessary %h[xudi] and %hh[xudi]")
Standard integer promotion is already done and %hx and %hhx is useless
so do not encourage the use of %hh[xudi] or %h[xudi].
Reviewed-By: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20210123160003.1777766-1-trix@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When create the VMCI queue pair tracking data structures on the host
side, the IOCTL for creating the VMCI queue pair didn't validate
the queue pair size parameters. This change adds checks for this.
This avoids a memory allocation issue in qp_host_alloc_queue, as
reported by nslusarek@gmx.net. The check in qp_host_alloc_queue
has also been updated to enforce the maximum queue pair size
as defined by VMCI_MAX_GUEST_QP_MEMORY.
The fix has been verified using sample code supplied by
nslusarek@gmx.net.
Reported-by: nslusarek@gmx.net
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Signed-off-by: Jorgen Hansen <jhansen@vmware.com>
Link: https://lore.kernel.org/r/1611160420-30573-1-git-send-email-jhansen@vmware.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the VMCI host support releases guest memory in the case where
the VM was killed, the pinned guest pages aren't locked. Use
set_page_dirty_lock() instead of set_page_dirty().
Testing done: Killed VM while having an active VMCI based vSocket
connection and observed warning from ext4. With this fix, no
warning was observed. Ran various vSocket tests without issues.
Fixes: 06164d2b72 ("VMCI: queue pairs implementation.")
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Signed-off-by: Jorgen Hansen <jhansen@vmware.com>
Link: https://lore.kernel.org/r/1611160360-30299-1-git-send-email-jhansen@vmware.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
VMCI queue pair allocation is disabled, if a VM is in FT mode. In
these cases, VMware Tools may still once in a while attempt to
create a vSocket stream connection, resulting in multiple
warnings in the kernel logs. Therefore downgrade the error log to
a debug log.
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Signed-off-by: Jorgen Hansen <jhansen@vmware.com>
Link: https://lore.kernel.org/r/1611160340-30158-1-git-send-email-jhansen@vmware.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add ttyVK support to driver to allow console access to VK card from host.
Device node will be in the follow form /dev/bcm-vk.x_ttyVKy where:
x is the instance of the VK card
y is the tty device number on the VK card
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Link: https://lore.kernel.org/r/20210120175827.14820-14-scott.branden@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add mmap function that allows host application to open up BAR2 memory
for remote spooling out messages from the VK logger.
Co-developed-by: Desmond Yan <desmond.yan@broadcom.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Desmond Yan <desmond.yan@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Link: https://lore.kernel.org/r/20210120175827.14820-12-scott.branden@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add reset support via ioctl.
Kill user processes that are open when VK card is reset.
If a particular PID has issued the reset request do not kill that process
as it issued the ioctl.
Co-developed-by: Desmond Yan <desmond.yan@broadcom.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Desmond Yan <desmond.yan@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Link: https://lore.kernel.org/r/20210120175827.14820-11-scott.branden@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add message support in order to be able to communicate
to VK card via message queues.
This info is used for debug purposes via collection of logs via direct
read of BAR space and by sysfs access (in a follow on commit).
Co-developed-by: Desmond Yan <desmond.yan@broadcom.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Desmond Yan <desmond.yan@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Link: https://lore.kernel.org/r/20210120175827.14820-10-scott.branden@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support to get card_info (details about card),
peerlog_info (to get details of peerlog on card),
and proc_mon_info (process monitoring on card).
This info is used for collection of logs via direct
read of BAR space and by sysfs access (in a follow on commit).
Co-developed-by: Desmond Yan <desmond.yan@broadcom.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Desmond Yan <desmond.yan@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Link: https://lore.kernel.org/r/20210120175827.14820-9-scott.branden@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add ioctl support to issue load_image operation to VK card.
Co-developed-by: Desmond Yan <desmond.yan@broadcom.com>
Co-developed-by: James Hu <james.hu@broadcom.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Desmond Yan <desmond.yan@broadcom.com>
Signed-off-by: James Hu <james.hu@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Link: https://lore.kernel.org/r/20210120175827.14820-8-scott.branden@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add open/release to replace private data with context for other methods
to use. Reason for the context is because it is allowed for multiple
sessions to open sysfs. For each file open, when upper layer queries the
response, only those that are tied to a specified open should be returned.
Co-developed-by: Desmond Yan <desmond.yan@broadcom.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Desmond Yan <desmond.yan@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Link: https://lore.kernel.org/r/20210120175827.14820-7-scott.branden@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pass down an interrupt to card in case of panic or reboot so
that card can take appropriate action to perform a clean reset.
Uses kernel notifier block either directly (register on panic list),
or implicitly (add shutdown method for PCI device).
Co-developed-by: Desmond Yan <desmond.yan@broadcom.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Desmond Yan <desmond.yan@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Link: https://lore.kernel.org/r/20210120175827.14820-6-scott.branden@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add misc device base support to create and remove devnode.
Additional misc functions for open/read/write/release/ioctl/sysfs, etc
will be added in follow on commits to allow for individual review.
Co-developed-by: Desmond Yan <desmond.yan@broadcom.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Desmond Yan <desmond.yan@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Link: https://lore.kernel.org/r/20210120175827.14820-5-scott.branden@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support to load and boot images on card automatically.
The kernel module parameter auto_load can be passed in as false to disable
such support on probe.
As well, nr_scratch_pages can be specified to allocate more or less scratch
memory on init as needed for desired card operation.
Co-developed-by: Desmond Yan <desmond.yan@broadcom.com>
Co-developed-by: James Hu <james.hu@broadcom.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Desmond Yan <desmond.yan@broadcom.com>
Signed-off-by: James Hu <james.hu@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Link: https://lore.kernel.org/r/20210120175827.14820-4-scott.branden@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add initial version of Broadcom VK driver to enumerate PCI device IDs
of Valkyrie and Viper device IDs.
VK based cards provide real-time high performance, high throughput,
low latency offload compute engine operations.
They are used for multiple parallel offload tasks as:
audio, video and image processing and crypto operations.
Further commits add additional features to driver beyond probe/remove.
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Link: https://lore.kernel.org/r/20210120175827.14820-3-scott.branden@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When device is removed, we need to make sure the F/W won't send us
any more events because during the remove process we disable the
interrupts.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Need to take the lower 32 bits of the driver's 64-bit idle mask and put
it in the legacy 32-bit variable that the userspace reads to know the
idle mask.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Driver does not zero some pci counters packets before sending
to FW. This causes an out of sync PI/CI between driver and FW.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
A dummy zero bit is sent preceding the data during a read transfer by the
Microchip 93LC46B eeprom (section 2.7 of[1]). This results in right shift
of data during a read. In order to ignore this bit a quirk can be added to
send an extra zero bit after the read address.
Add a quirk to ignore the zero bit sent before data by adding a zero bit
after the read address.
[1] - https://www.mouser.com/datasheet/2/268/20001749K-277859.pdf
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Link: https://lore.kernel.org/r/20210105105817.17644-3-a-govindraju@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Disable LTO for rodata.o to allow objcopy to be used to
manipulate sections.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201211184633.3213045-14-samitolvanen@google.com
Module alias "spi:93xx46" is used by non device tree users like
drivers/misc/eeprom/digsy_mtc_eeprom.c and removing it will
break support for them.
Fix this by adding back the module alias "spi:93xx46".
Fixes: 13613a2246 ("misc: eeprom_93xx46: Fix module alias to enable module autoprobe")
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Link: https://lore.kernel.org/r/20210113051253.15061-1-a-govindraju@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the size of WIRED_REPEATER_AUTH_STREAM_REQ cmd buffer size.
It is based upon the actual number of MST streams and size
of wired_cmd_repeater_auth_stream_req_in.
Excluding the size of hdcp_cmd_header.
v2:
- hdcp_cmd_header size annotation nitpick. [Tomas]
Cc: Tomas Winkler <tomas.winkler@intel.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Tested-by: Karthik B S <karthik.b.s@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111081120.28417-13-anshuman.gupta@intel.com
These are persistent, not just for the duration of a dma operation.
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: linux-mm@kvack.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Omer Shpigelman <oshpigelman@habana.ai>
Cc: Ofir Bitton <obitton@habana.ai>
Cc: Tomer Tayar <ttayar@habana.ai>
Cc: Moti Haimovski <mhaimovski@habana.ai>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Pawel Piskorski <ppiskorski@habana.ai>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201127164131.2244124-5-daniel.vetter@ffwll.ch
All we need are a pages array, pin_user_pages_fast can give us that
directly. Plus this avoids the entire raw pfn side of get_vaddr_frames.
Note that pin_user_pages_fast is a safe replacement despite the
seeming lack of checking for vma->vm_flasg & (VM_IO | VM_PFNMAP). Such
ptes are marked with pte_mkspecial (which pup_fast rejects in the
fastpath), and only architectures supporting that support the
pin_user_pages_fast fastpath.
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: linux-mm@kvack.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Omer Shpigelman <oshpigelman@habana.ai>
Cc: Ofir Bitton <obitton@habana.ai>
Cc: Tomer Tayar <ttayar@habana.ai>
Cc: Moti Haimovski <mhaimovski@habana.ai>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Pawel Piskorski <ppiskorski@habana.ai>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201127164131.2244124-4-daniel.vetter@ffwll.ch
When using Deep learning framework such as tensorflow or pytorch, there
are tens of thousands of host memory mappings. When the user frees
all those mappings at the same time, the process of unmapping and
unpinning them can take a long time, which may cause a soft lockup
bug.
To prevent this, we need to free the core to do other things during
the unmapping process. For now, we chose to do it every 32K unmappings
(each unmap is a single 4K page).
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
There are some points in the reset process where if the code fails
for some reason, and the system admin tries to initiate the reset
process again we will get a kernel panic.
This is because there aren't any protections in different fini
functions that are called during the reset process.
The protections that are added in this patch make sure that if the fini
functions are called multiple times, without calling init functions
between them, there won't be double release of already released
resources.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
When doing dma_alloc_coherent in the driver, we add a certain hard-coded
offset to the DMA address before returning to the callee function. This
offset is needed when our device use this DMA address to perform
outbound transactions to the host.
However, if we want to map the DMA'able memory to the user via
dma_mmap_coherent(), we need to pass the original dma address, without
this offset. Otherwise, we will get erronouos mapping.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Inconveniently devm_ioport_map() and devm_ioremap_resource()
return errors differently, i.e. former uses simply NULL pointer,
while the latter an error pointer.
Due to this, we have to check each of them separately.
Fixes: f104060813 ("misc: pvpanic: Combine ACPI and platform drivers")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20201228184313.57610-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add module alias to enable autoprobe for microchip 93LC46B eeprom by using
/sys/class/.../spi1.0/modalias content.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Link: https://lore.kernel.org/r/20210107163957.28664-3-a-govindraju@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix module autoprobe by correcting module alias to match the string from
/sys/class/.../spi1.0/modalias content.
Fixes: 06b4501e88 ("misc/eeprom: add driver for microwire 93xx46 EEPROMs")
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Link: https://lore.kernel.org/r/20210107163957.28664-2-a-govindraju@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When kzalloc() fails, we should execute hl_mmu_fini()
to release the MMU module. It's the same when
hl_ctx_init() fails.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
We need to make sure our device is idle when rebooting a virtual
machine. This is done in the driver level.
The firmware will later handle FLR but we want to be extra safe and
stop the devices until the FLR is handled.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Up until now validation errors were counted in the parsing field
of the cs_counters struct, so we added a new counter and increased
it when needed.
In addition, there were some locations where only one of the counters
was updated (ctx or aggregate) so add the second one to be updated
as well.
Signed-off-by: Alon Mizrahi <amizrahi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
When the firmware security is enabled, the pcie_aux_dbi_reg_addr
register in the PCI controller is blocked. Therefore, ignore
the result of writing to this register and assume it worked. Also
remove the prints on errors in the internal ELBI write function.
If the security is enabled, the firmware is responsible for setting
this register correctly so we won't have any problem.
If the security is disabled, the write will work (unless something
is totally broken at the PCI level and then the whole sequence
will fail).
In addition, remove a write to register pcie_aux_dbi_reg_addr+4,
which was never actually needed.
Moreover, PCIE_DBI registers are blocked to access from host when
firmware security is enabled. Use a different register to flush the
writes.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Driver must fetch FW hard reset capability at every FW boot stage:
preboot, CPU boot, CPU application.
If hard reset is triggered, driver will take into consideration
only the last capability received.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In case the clock gating was enabled in preboot we need to disable it
at the H/W initialization stage before touching the MME/TPC registers.
Otherwise, the ASIC can get stuck. If the security is enabled in
the firmware level, the CGM is always disabled and the driver can't
enable it.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
hw_queues_mirror was renamed to cs_mirror, so revise accordingly a
comment that refers to this list.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
We don't need to set EB on signal packets from collective slave
queues as it degrades performance. Because the slaves are the network
queues, the engine barrier doesn't actually guarantee that the
packet has been sent.
Signed-off-by: Alon Mizrahi <amizrahi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
FW hard reset capability indication is now moved to preboot stage.
Driver will check if HW is dirty only after it validated preboot
is up. If HW is dirty, driver will perform a hard reset according
to the FW capability.
In addition, FW defines a new message which driver need to send in
order to initiate a hard reset.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
As we only fetch the CPU_PLL frequency in gaudi, we don't need a
generic get_pll_frequency function which takes a pll index as input
Signed-off-by: Alon Mizrahi <amizrahi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
When the F/W security is enabled, goya needs to fetch the PSOC pll
frequency through a dedicated interface
Signed-off-by: Alon Mizrahi <amizrahi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
- Switch to the generic C VDSO, as well as some cleanups of our VDSO
setup/handling code.
- Support for KUAP (Kernel User Access Prevention) on systems using the hashed
page table MMU, using memory protection keys.
- Better handling of PowerVM SMT8 systems where all threads of a core do not
share an L2, allowing the scheduler to make better scheduling decisions.
- Further improvements to our machine check handling.
- Show registers when unwinding interrupt frames during stack traces.
- Improvements to our pseries (PowerVM) partition migration code.
- Several series from Christophe refactoring and cleaning up various parts of
the 32-bit code.
- Other smaller features, fixes & cleanups.
Thanks to:
Alan Modra, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Ard
Biesheuvel, Athira Rajeev, Balamuruhan S, Bill Wendling, Cédric Le Goater,
Christophe Leroy, Christophe Lombard, Colin Ian King, Daniel Axtens, David
Hildenbrand, Frederic Barrat, Ganesh Goudar, Gautham R. Shenoy, Geert
Uytterhoeven, Giuseppe Sacco, Greg Kurz, Harish, Jan Kratochvil, Jordan
Niethe, Kaixu Xia, Laurent Dufour, Leonardo Bras, Madhavan Srinivasan, Mahesh
Salgaonkar, Mathieu Desnoyers, Nathan Lynch, Nicholas Piggin, Oleg Nesterov,
Oliver O'Halloran, Oscar Salvador, Po-Hsu Lin, Qian Cai, Qinglang Miao, Randy
Dunlap, Ravi Bangoria, Sachin Sant, Sandipan Das, Sebastian Andrzej Siewior ,
Segher Boessenkool, Srikar Dronamraju, Tyrel Datwyler, Uwe Kleine-König,
Vincent Stehlé, Youling Tang, Zhang Xiaoxu.
-----BEGIN PGP SIGNATURE-----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=Ga3K
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Switch to the generic C VDSO, as well as some cleanups of our VDSO
setup/handling code.
- Support for KUAP (Kernel User Access Prevention) on systems using the
hashed page table MMU, using memory protection keys.
- Better handling of PowerVM SMT8 systems where all threads of a core
do not share an L2, allowing the scheduler to make better scheduling
decisions.
- Further improvements to our machine check handling.
- Show registers when unwinding interrupt frames during stack traces.
- Improvements to our pseries (PowerVM) partition migration code.
- Several series from Christophe refactoring and cleaning up various
parts of the 32-bit code.
- Other smaller features, fixes & cleanups.
Thanks to: Alan Modra, Alexey Kardashevskiy, Andrew Donnellan, Aneesh
Kumar K.V, Ard Biesheuvel, Athira Rajeev, Balamuruhan S, Bill Wendling,
Cédric Le Goater, Christophe Leroy, Christophe Lombard, Colin Ian King,
Daniel Axtens, David Hildenbrand, Frederic Barrat, Ganesh Goudar,
Gautham R. Shenoy, Geert Uytterhoeven, Giuseppe Sacco, Greg Kurz,
Harish, Jan Kratochvil, Jordan Niethe, Kaixu Xia, Laurent Dufour,
Leonardo Bras, Madhavan Srinivasan, Mahesh Salgaonkar, Mathieu
Desnoyers, Nathan Lynch, Nicholas Piggin, Oleg Nesterov, Oliver
O'Halloran, Oscar Salvador, Po-Hsu Lin, Qian Cai, Qinglang Miao, Randy
Dunlap, Ravi Bangoria, Sachin Sant, Sandipan Das, Sebastian Andrzej
Siewior , Segher Boessenkool, Srikar Dronamraju, Tyrel Datwyler, Uwe
Kleine-König, Vincent Stehlé, Youling Tang, and Zhang Xiaoxu.
* tag 'powerpc-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (304 commits)
powerpc/32s: Fix cleanup_cpu_mmu_context() compile bug
powerpc: Add config fragment for disabling -Werror
powerpc/configs: Add ppc64le_allnoconfig target
powerpc/powernv: Rate limit opal-elog read failure message
powerpc/pseries/memhotplug: Quieten some DLPAR operations
powerpc/ps3: use dma_mapping_error()
powerpc: force inlining of csum_partial() to avoid multiple csum_partial() with GCC10
powerpc/perf: Fix Threshold Event Counter Multiplier width for P10
powerpc/mm: Fix hugetlb_free_pmd_range() and hugetlb_free_pud_range()
KVM: PPC: Book3S HV: Fix mask size for emulated msgsndp
KVM: PPC: fix comparison to bool warning
KVM: PPC: Book3S: Assign boolean values to a bool variable
powerpc: Inline setup_kup()
powerpc/64s: Mark the kuap/kuep functions non __init
KVM: PPC: Book3S HV: XIVE: Add a comment regarding VP numbering
powerpc/xive: Improve error reporting of OPAL calls
powerpc/xive: Simplify xive_do_source_eoi()
powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_EOI_FW
powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_MASK_FW
powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_SHIFT_BUG
...
In lkdtm.h, files targeted in comments are named "lkdtm_file.c" while
there are named "file.c" in directory.
Link: https://lkml.kernel.org/r/20201122162451.27551-6-laniel_francis@privacyrequired.com
Signed-off-by: Francis Laniel <laniel_francis@privacyrequired.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This new test ensures that fortified strscpy has the same behavior than
vanilla strscpy (e.g. returning -E2BIG when src content is truncated).
Finally, it generates a crash at runtime because there is a write overflow
in destination string.
Link: https://lkml.kernel.org/r/20201122162451.27551-5-laniel_francis@privacyrequired.com
Signed-off-by: Francis Laniel <laniel_francis@privacyrequired.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add code to test both:
- runtime detection of the overrun of a structure. This covers the
__builtin_object_size(x, 0) case. This test is called FORTIFY_OBJECT.
- runtime detection of the overrun of a char array within a structure.
This covers the __builtin_object_size(x, 1) case which can be used
for some string functions. This test is called FORTIFY_SUBOBJECT.
Link: https://lkml.kernel.org/r/20201122162451.27551-3-laniel_francis@privacyrequired.com
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Francis Laniel <laniel_francis@privacyrequired.com>
Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Initial support for SD express card/host
MMC host:
- mxc: Convert the driver to DT-only
- mtk-sd: Add HS400 enhanced strobe support
- mtk-sd: Add support for the MT8192 SoC variant
- sdhci-acpi: Allow changing HS200/HS400 driver strength for AMDI0040
- sdhci-esdhc-imx: Convert the driver to DT-only
- sdhci-pci-gli: Improve performance for HS400 mode for GL9763E
- sdhci-pci-gli: Reduce power consumption for GL9755
- sdhci-xenon: Introduce ACPI support
- tmio: Fix command error processing
- tmio: Inform the core about the max_busy_timeout
- tmio/renesas_sdhi: Support custom calculation of busy-wait time
- renesas_sdhi: Reset SCC only when available
- rtsx_pci: Add SD Express mode support for RTS5261
- rtsx_pci: Various fixes and improvements for RTS5261
MEMSTICK:
- Minor fixes/improvements.
-----BEGIN PGP SIGNATURE-----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=1A/T
-----END PGP SIGNATURE-----
Merge tag 'mmc-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Initial support for SD express card/host
MMC host:
- mxc: Convert the driver to DT-only
- mtk-sd: Add HS400 enhanced strobe support
- mtk-sd: Add support for the MT8192 SoC variant
- sdhci-acpi: Allow changing HS200/HS400 driver strength for AMDI0040
- sdhci-esdhc-imx: Convert the driver to DT-only
- sdhci-pci-gli: Improve performance for HS400 mode for GL9763E
- sdhci-pci-gli: Reduce power consumption for GL9755
- sdhci-xenon: Introduce ACPI support
- tmio: Fix command error processing
- tmio: Inform the core about the max_busy_timeout
- tmio/renesas_sdhi: Support custom calculation of busy-wait time
- renesas_sdhi: Reset SCC only when available
- rtsx_pci: Add SD Express mode support for RTS5261
- rtsx_pci: Various fixes and improvements for RTS5261
MEMSTICK:
- Minor fixes/improvements"
* tag 'mmc-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (72 commits)
dt-bindings: mmc: eliminate yamllint warnings
mmc: sdhci-xenon: introduce ACPI support
mmc: sdhci-xenon: use clk only with DT
mmc: sdhci-xenon: switch to device_* API
mmc: sdhci-xenon: use match data for controllers variants
dt-bindings: mmc: Fix xlnx,mio-bank property values for arasan driver
mmc: renesas_sdhi: populate hook for longer busy_wait
mmc: tmio: add hook for custom busy_wait calculation
mmc: tmio: set max_busy_timeout
dt-bindings: mmc: imx: fix the wrongly dropped imx8qm compatible string
mmc: sdhci-pci-gli: Disable slow mode in HS400 mode for GL9763E
mmc: sdhci: Use more concise device_property_read_u64
memstick: r592: Fix error return in r592_probe()
mmc: mxc: Convert the driver to DT-only
mmc: mxs: Remove the unused .id_table
mmc: sdhci-of-arasan: Fix fall-through warnings for Clang
mmc: sdhci-pci-gli: Reduce power consumption for GL9755
mmc: mediatek: depend on COMMON_CLK to fix compile tests
mmc: pxamci: Fix error return code in pxamci_probe
mmc: sdhci: Update firmware interface API
...
Here is the big char/misc driver update for 5.11-rc1.
Continuing the tradition of previous -rc1 pulls, there seems to be more
and more tiny driver subsystems flowing through this tree.
Lots of different things, all of which have been in linux-next for a
while with no reported issues:
- extcon driver updates
- habannalab driver updates
- mei driver updates
- uio driver updates
- binder fixes and features added
- soundwire driver updates
- mhi bus driver updates
- phy driver updates
- coresight driver updates
- fpga driver updates
- speakup driver updates
- slimbus driver updates
- various small char and misc driver updates
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX9iDZA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylRMACgqxKS2CUcY8tPnR5weHEsbz6O+KAAn3BtEFnK
7V9EnSuZe4L1jNOHOB5V
=xzHh
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the big char/misc driver update for 5.11-rc1.
Continuing the tradition of previous -rc1 pulls, there seems to be
more and more tiny driver subsystems flowing through this tree.
Lots of different things, all of which have been in linux-next for a
while with no reported issues:
- extcon driver updates
- habannalab driver updates
- mei driver updates
- uio driver updates
- binder fixes and features added
- soundwire driver updates
- mhi bus driver updates
- phy driver updates
- coresight driver updates
- fpga driver updates
- speakup driver updates
- slimbus driver updates
- various small char and misc driver updates"
* tag 'char-misc-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (305 commits)
extcon: max77693: Fix modalias string
extcon: fsa9480: Support TI TSU6111 variant
extcon: fsa9480: Rewrite bindings in YAML and extend
dt-bindings: extcon: add binding for TUSB320
extcon: Add driver for TI TUSB320
slimbus: qcom: fix potential NULL dereference in qcom_slim_prg_slew()
siox: Make remove callback return void
siox: Use bus_type functions for probe, remove and shutdown
spmi: Add driver shutdown support
spmi: fix some coding style issues at the spmi core
spmi: get rid of a warning when built with W=1
uio: uio_hv_generic: use devm_kzalloc() for private data alloc
uio: uio_fsl_elbc_gpcm: use device-managed allocators
uio: uio_aec: use devm_kzalloc() for uio_info object
uio: uio_cif: use devm_kzalloc() for uio_info object
uio: uio_netx: use devm_kzalloc() for or uio_info object
uio: uio_mf624: use devm_kzalloc() for uio_info object
uio: uio_sercos3: use device-managed functions for simple allocs
uio: uio_dmem_genirq: finalize conversion of probe to devm_ handlers
uio: uio_dmem_genirq: convert simple allocations to device-managed
...
Here is the big driver core updates for 5.11-rc1
This time there was a lot of different work happening here for some
reason:
- redo of the fwnode link logic, speeding it up greatly
- auxiliary bus added (this was a tag that will be pulled in
from other trees/maintainers this merge window as well, as
driver subsystems started to rely on it)
- platform driver core cleanups on the way to fixing some
long-time api updates in future releases
- minor fixes and tweaks.
All have been in linux-next with no (finally) reported issues. Testing
there did helped in shaking issues out a lot :)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX9iEUQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynBJwCgjBAtVWXquZz4m/pyjn0HoTC7tdYAnAlQIj9s
vRbPjOgH9R+YRJzFs1Kx
=X6UP
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big driver core updates for 5.11-rc1
This time there was a lot of different work happening here for some
reason:
- redo of the fwnode link logic, speeding it up greatly
- auxiliary bus added (this was a tag that will be pulled in from
other trees/maintainers this merge window as well, as driver
subsystems started to rely on it)
- platform driver core cleanups on the way to fixing some long-time
api updates in future releases
- minor fixes and tweaks.
All have been in linux-next with no (finally) reported issues. Testing
there did helped in shaking issues out a lot :)"
* tag 'driver-core-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (39 commits)
driver core: platform: don't oops in platform_shutdown() on unbound devices
ACPI: Use fwnode_init() to set up fwnode
misc: pvpanic: Replace OF headers by mod_devicetable.h
misc: pvpanic: Combine ACPI and platform drivers
usb: host: sl811: Switch to use platform_get_mem_or_io()
vfio: platform: Switch to use platform_get_mem_or_io()
driver core: platform: Introduce platform_get_mem_or_io()
dyndbg: fix use before null check
soc: fix comment for freeing soc_dev_attr
driver core: platform: use bus_type functions
driver core: platform: change logic implementing platform_driver_probe
driver core: platform: reorder functions
driver core: make driver_probe_device() static
driver core: Fix a couple of typos
driver core: Reorder devices on successful probe
driver core: Delete pointless parameter in fwnode_operations.add_links
driver core: Refactor fw_devlink feature
efi: Update implementation of add_links() to create fwnode links
of: property: Update implementation of add_links() to create fwnode links
driver core: Use device's fwnode to check if it is waiting for suppliers
...
Merge misc updates from Andrew Morton:
- a few random little subsystems
- almost all of the MM patches which are staged ahead of linux-next
material. I'll trickle to post-linux-next work in as the dependents
get merged up.
Subsystems affected by this patch series: kthread, kbuild, ide, ntfs,
ocfs2, arch, and mm (slab-generic, slab, slub, dax, debug, pagecache,
gup, swap, shmem, memcg, pagemap, mremap, hmm, vmalloc, documentation,
kasan, pagealloc, memory-failure, hugetlb, vmscan, z3fold, compaction,
oom-kill, migration, cma, page-poison, userfaultfd, zswap, zsmalloc,
uaccess, zram, and cleanups).
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (200 commits)
mm: cleanup kstrto*() usage
mm: fix fall-through warnings for Clang
mm: slub: convert sysfs sprintf family to sysfs_emit/sysfs_emit_at
mm: shmem: convert shmem_enabled_show to use sysfs_emit_at
mm:backing-dev: use sysfs_emit in macro defining functions
mm: huge_memory: convert remaining use of sprintf to sysfs_emit and neatening
mm: use sysfs_emit for struct kobject * uses
mm: fix kernel-doc markups
zram: break the strict dependency from lzo
zram: add stat to gather incompressible pages since zram set up
zram: support page writeback
mm/process_vm_access: remove redundant initialization of iov_r
mm/zsmalloc.c: rework the list_add code in insert_zspage()
mm/zswap: move to use crypto_acomp API for hardware acceleration
mm/zswap: fix passing zero to 'PTR_ERR' warning
mm/zswap: make struct kernel_param_ops definitions const
userfaultfd/selftests: hint the test runner on required privilege
userfaultfd/selftests: fix retval check for userfaultfd_open()
userfaultfd/selftests: always dump something in modes
userfaultfd: selftests: make __{s,u}64 format specifiers portable
...
Building lkdtm with KASAN and Clang 11 or later results in the following
error when attempting to load the module:
kernel tried to execute NX-protected page - exploit attempt? (uid: 0)
BUG: unable to handle page fault for address: ffffffffc019cd70
#PF: supervisor instruction fetch in kernel mode
#PF: error_code(0x0011) - permissions violation
...
RIP: 0010:asan.module_ctor+0x0/0xffffffffffffa290 [lkdtm]
...
Call Trace:
do_init_module+0x17c/0x570
load_module+0xadee/0xd0b0
__x64_sys_finit_module+0x16c/0x1a0
do_syscall_64+0x34/0x50
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The reason is that rodata.o generates a dummy function that lives in
.rodata to validate that .rodata can't be executed; however, Clang 11 adds
KASAN globals support by generating module constructors to initialize
globals redzones. When Clang 11 adds a module constructor to rodata.o, it
is also added to .rodata: any attempt to call it on initialization results
in the above error.
Therefore, disable KASAN instrumentation for rodata.o.
Link: https://lkml.kernel.org/r/20201214191413.3164796-1-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
core:
- documentation updates
- deprecate DRM_FORMAT_MOD_NONE
- atomic crtc enable/disable rework
- GEM convert drivers to gem object functions
- remove SCATTER_LIST_MAX_SEGMENT
sched:
- avoid infinite waits
ttm:
- remove AGP support
- don't modify caching for swapout
- ttm pinning rework
- major TTM reworks
- new backend allocator
- multihop support
vram-helper:
- top down BO placement fix
- TTM changes
- GEM object support
displayport:
- DP 2.0 DPCD prep work
- DP MST extended DPCD caps
fbdev:
- mark as orphaned
amdgpu:
- Initial Vangogh support
- Green Sardine support
- Dimgrey Cavefish support
- SG display support for renoir
- SMU7 improvements
- gfx9+ modiifier support
- CI BACO fixes
radeon:
- expose voltage via hwmon on SUMO
amdkfd:
- fix unique id handling
i915:
- more DG1 enablement
- bigjoiner support
- integer scaling filter support
- async flip support
- ICL+ DSI command mode
- Improve display shutdown
- Display refactoring
- eLLC machine fbdev loading fix
- dma scatterlist fixes
- TGL hang fixes
- eLLC display buffer caching on SKL+
- MOCS PTE seeting for gen9+
msm:
- Shutdown hook
- GPU cooling device support
- DSI 7nm and 10nm phy/pll updates
- sm8150/sm2850 DPU support
- GEM locking re-work
- LLCC system cache support
aspeed:
- sysfs output config support
ast:
- LUT fix
- new display mode
gma500:
- remove 2d framebuffer accel
panfrost:
- move gpu reset to a worker
exynos:
- new HDMI mode support
mediatek:
- MT8167 support
- yaml bindings
- MIPI DSI phy code moved
etnaviv:
- new perf counter
- more lockdep annotation
hibmc:
- i2c DDC support
ingenic:
- pixel clock reset fix
- reserved memory support
- allow both DMA channels at once
- different pixel format support
- 30/24/8-bit palette modes
tilcdc:
- don't keep vblank irq enabled
vc4:
- new maintainer added
- DSI registration fix
virtio:
- blob resource support
- host visible and cross-device support
- uuid api support
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJf0upGAAoJEAx081l5xIa+1EoP/2OkZnl5d9S26qPja15EoRFl
S69OjNci331Br9Y111jD2OCtyqA7w3ppnvCmzpHOBK1IZjhkxOVNC6PSUFSV4M3V
oVOxZK0KaMHpLU2p90NbURWHa2TOktj7IWb9FrhPaEeBECbFuORZ2TbloFhaoyyt
9auEAwqYRPgF8CSYOjQGGZJ85MQN4ImExTdY13+BZgQlGLiSPHfpnLVJ1Q5TPt6A
BLgcU/DFcqOZqyjeu+CuA+LZSHjHeVJxTOGRX65PoTtU3Xus8TRZ/qL4r8e6mAI1
boFLmsevvQlzaQ9GFohc+l9QR/dtnm6SpZxuEelewh7sQvsz2GI+SNF+OHcwHCph
TYIEtyZNaz1bf7ip75FGbhEVaWh2PUMn3zkGlYt+zqAtznYB+dFPc31hhuVn3o5X
c8UwLDUUJLzTePKPZ0UtzIu4Gm2RYTyRsnUAP0OKP/0WaZRyxnoQMYm5Llg7RBe0
5ZJSWjJPBlv1YMWAHQ0YMZ+MhnFE8k4eV/8WfBQnb2INosgzKfJXEmu6ffAkPqSq
jxBsrVQwtOMF2P9VEfdQDv3fs0GKDuZN5ezTFuW59Dt4VYfCUe2FTssSwFBIp5X9
erPJ/nk883rcI6F0PdArNYvWpwPlVSDJyfTxQbYYxVAf8X1ARJCU3PT6iBnGO3i4
d5tveSc8HoOXr4W3eIjn
=c9rl
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2020-12-11' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Not a huge amount of big things here, AMD has support for a few new HW
variants (vangogh, green sardine, dimgrey cavefish), Intel has some
more DG1 enablement. We have a few big reworks of the TTM layers and
interfaces, GEM and atomic internal API reworks cross tree. fbdev is
marked orphaned in here as well to reflect the current reality.
core:
- documentation updates
- deprecate DRM_FORMAT_MOD_NONE
- atomic crtc enable/disable rework
- GEM convert drivers to gem object functions
- remove SCATTER_LIST_MAX_SEGMENT
sched:
- avoid infinite waits
ttm:
- remove AGP support
- don't modify caching for swapout
- ttm pinning rework
- major TTM reworks
- new backend allocator
- multihop support
vram-helper:
- top down BO placement fix
- TTM changes
- GEM object support
displayport:
- DP 2.0 DPCD prep work
- DP MST extended DPCD caps
fbdev:
- mark as orphaned
amdgpu:
- Initial Vangogh support
- Green Sardine support
- Dimgrey Cavefish support
- SG display support for renoir
- SMU7 improvements
- gfx9+ modiifier support
- CI BACO fixes
radeon:
- expose voltage via hwmon on SUMO
amdkfd:
- fix unique id handling
i915:
- more DG1 enablement
- bigjoiner support
- integer scaling filter support
- async flip support
- ICL+ DSI command mode
- Improve display shutdown
- Display refactoring
- eLLC machine fbdev loading fix
- dma scatterlist fixes
- TGL hang fixes
- eLLC display buffer caching on SKL+
- MOCS PTE seeting for gen9+
msm:
- Shutdown hook
- GPU cooling device support
- DSI 7nm and 10nm phy/pll updates
- sm8150/sm2850 DPU support
- GEM locking re-work
- LLCC system cache support
aspeed:
- sysfs output config support
ast:
- LUT fix
- new display mode
gma500:
- remove 2d framebuffer accel
panfrost:
- move gpu reset to a worker
exynos:
- new HDMI mode support
mediatek:
- MT8167 support
- yaml bindings
- MIPI DSI phy code moved
etnaviv:
- new perf counter
- more lockdep annotation
hibmc:
- i2c DDC support
ingenic:
- pixel clock reset fix
- reserved memory support
- allow both DMA channels at once
- different pixel format support
- 30/24/8-bit palette modes
tilcdc:
- don't keep vblank irq enabled
vc4:
- new maintainer added
- DSI registration fix
virtio:
- blob resource support
- host visible and cross-device support
- uuid api support"
* tag 'drm-next-2020-12-11' of git://anongit.freedesktop.org/drm/drm: (1754 commits)
drm/amdgpu: Initialise drm_gem_object_funcs for imported BOs
drm/amdgpu: fix size calculation with stolen vga memory
drm/amdgpu: remove amdgpu_ttm_late_init and amdgpu_bo_late_init
drm/amdgpu: free the pre-OS console framebuffer after the first modeset
drm/amdgpu: enable runtime pm using BACO on CI dGPUs
drm/amdgpu/cik: enable BACO reset on Bonaire
drm/amd/pm: update smu10.h WORKLOAD_PPLIB setting for raven
drm/amd/pm: remove one unsupported smu function for vangogh
drm/amd/display: setup system context for APUs
drm/amd/display: add S/G support for Vangogh
drm/amdkfd: Fix leak in dmabuf import
drm/amdgpu: use AMDGPU_NUM_VMID when possible
drm/amdgpu: fix sdma instance fw version and feature version init
drm/amd/pm: update driver if version for dimgrey_cavefish
drm/amd/display: 3.2.115
drm/amd/display: [FW Promotion] Release 0.0.45
drm/amd/display: Revert DCN2.1 dram_clock_change_latency update
drm/amd/display: Enable gpu_vm_support for dcn3.01
drm/amd/display: Fixed the audio noise during mode switching with HDCP mode on
drm/amd/display: Add wm table for Renoir
...
- fix NVMEM name with custom AT24 device name
-----BEGIN PGP SIGNATURE-----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=Kmok
-----END PGP SIGNATURE-----
Merge tag 'at24-fixes-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-current
at24 fixes for v5.10
- fix NVMEM name with custom AT24 device name
There is no use for OF headers in the driver, but mod_devicetable.h
must be included. Update driver accordingly.
Cc: Peng Hao <peng.hao2@zte.com.cn>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20201209203642.27648-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is nothing special in the driver that requires to have
a special ACPI driver for it. Combine both into simple
platform driver.
Cc: Peng Hao <peng.hao2@zte.com.cn>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20201209203642.27648-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The value of the variable status must be one of the 0, -EIO and -EILSEQ, so
the switch case -ENODATA is unreached. Remove it.
Reported-by: Tosk Robot <tencent_os_robot@tencent.com>
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Link: https://lore.kernel.org/r/1605284071-6901-1-git-send-email-kaixuxia@tencent.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We return 'err' in the error branch, but this variable may be set as
zero before. Fix it by setting 'err' as a negative value before we
goto the error label.
Fixes: e03327122e ("pci_endpoint_test: Add 2 ioctl commands")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Link: https://lore.kernel.org/r/1605790158-6780-1-git-send-email-wangxiongfeng2@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'pci_set_dma_mask()' + 'pci_set_consistent_dma_mask()' can be replaced by
an equivalent 'dma_set_mask_and_coherent()' which is much less verbose.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20201201210147.7917-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rtsx_pcr:
add callback functions to support runtime PM
add delay_work to put device to D3 after idle
over 10 sec
rts5249:
add extra init flow for rtd3 and set rtd3_en from
config setting
rtsx_pci_sdmmc:
child device support autosuspend
Signed-off-by: Ricky Wu <ricky_wu@realtek.com>
Link: https://lore.kernel.org/r/20201202065857.19412-1-ricky_wu@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
changed rtsx_pci_disable_aspm() to rtsx_disable_aspm()
do not access ASPM configuration directly
changed pcie_capability_write_word() to _clear_and_set_word()
make sure only change PCI_EXP_LNKCTL bit8
make sure ASPM disable after extra_init_hw()
Signed-off-by: Ricky Wu <ricky_wu@realtek.com>
Link: https://lore.kernel.org/r/20201202063228.18319-1-ricky_wu@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The usage of in_interrupt() in xpc_partition_disengaged() is clearly
intended to avoid canceling the timeout timer when the function is invoked
from the timer callback.
While in_interrupt() is deprecated and ill defined as it does not provide
what the name suggests it catches the intended case.
Add an argument to xpc_partition_disengaged() which is true if called
from timer and otherwise false.
Use del_timer_sync() instead of del_singleshot_timer_sync() which is the
same thing.
Note: This does not prevent reentrancy into the function as the function
has no concurrency control and timer callback and regular task context
callers can happen concurrently on different CPUs or the timer can
interrupt the task context before it is able to cancel it.
While the only driver which is providing the arch_xpc_ops callbacks
(xpc_uv) seems not to have a reentrancy problem and the only negative
effect would be a double dev_info() entry in dmesg, the whole mechanism is
conceptually broken.
But that's not subject of this cleanup endeavour and left as an exercise to
the folks who might have interest to make that code fully correct.
[bigeasy: Add the argument, use del_timer_sync().]
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Cliff Whickman <cpw@sgi.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Robin Holt <robinmholt@gmail.com>
Cc: Steve Wahl <steve.wahl@hpe.com>
Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Russ Anderson <russ.anderson@hpe.com>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20201119103151.ppo45mj53ulbxjx4@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The operation of get/set mode was same with get/set resolution. It is
a typo absolutely. This patch updates these bits operated by get/set
mode.
Signed-off-by: Zhou Xingxing <zhou_x1@hoperun.com>
Link: https://lore.kernel.org/r/1607334545-2091-1-git-send-email-zhou_x1@hoperun.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Uwe Kleine-König