This (relatively) new SoC is similar to the H6, but drops the (broken)
PCIe support and the USB 3.0 controller. It also gets the management
controller removed, which in turn removes *some*, but not all of the
devices formerly dedicated to the ARISC (CPUS).
And while there is still the extra sunxi interrupt controller, the
package lacks the corresponding NMI pin, so no interrupts for the PMIC.
The reserved memory node is actually handled by Trusted Firmware now,
but U-Boot fails to propagate this to a separately loaded DTB, so we
keep it in here for now, until U-Boot learns to do this properly.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220708105235.3983266-4-andre.przywara@arm.com
This adds support for TQMa8MPQL module on MBa8MPxL board.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fix the usb_0 HS PHY reference clock which was mistakingly replaced with
the first usb_2 PHY clock.
Fixes: 152d1faf1e ("arm64: dts: qcom: add SC8280XP platform")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220708072358.4583-1-johan+linaro@kernel.org
The recent commit that dropped the PCIe PHY clock index failed to update
the PCIe node reference.
Fixes: 531c738fb3 ("arm64: dts: qcom: sc7280: drop PCIe PHY clock index")
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220707064222.15717-1-johan+linaro@kernel.org
Add spin-table enable-method and cpu-release-addr properties for
cpu0 node. This is required by all ARMv8 SoC. Otherwise some
bootloader like u-boot can not update cpu-release-addr and linux
fails to start up secondary cpus.
Fixes: 2961f69f15 ("arm64: dts: broadcom: add BCM4908 and Asus GT-AC5300 early DTS files")
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The cpu mask value in interrupt property inherits from bcm4908.dtsi
which sets to four cpus. Correct the value to two cpus for dual core
BCM4906 SoC.
Fixes: c8b404fb05 ("arm64: dts: broadcom: bcm4908: add BCM4906 Netgear R8000P DTS files")
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Revisions 1.0 and 1.1 of the PinePhone mainboard do not have an external
resistor connecting HBIAS to MIC2P. Enable the internal resistor to
provide the necessary headeset microphone bias.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220621035452.60272-4-samuel@sholland.org
Hook SDMMC1 CD up with CVM GPIO02 (SOC_GPIO11) used for card detection on J4
(uSD socket) on the carrier.
Fixes: ef633bfc21 ("arm64: tegra: Enable card detect for SD card on P2888")
Signed-off-by: Tamás Szűcs <tszucs@protonmail.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use the compatible specific to Tegra234 for GPCDMA to support
additional features.
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add device tree nodes for Host1x and VIC on Tegra234.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add Host1x context stream IDs on systems that support Host1x context
isolation. Host1x and attached engines can use these stream IDs to
allow isolation between memory used by different processes.
The specified stream IDs must match those configured by the hypervisor,
if one is present.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The native timers IP block found on NVIDIA Tegra SoCs implements a
watchdog timer that can be used to recover from system hangs. Add and
enable the device tree node on Tegra234.
Signed-off-by: Kartik <kkartik@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The native timers IP block found on NVIDIA Tegra SoCs implements a
watchdog timer that can be used to recover from system hangs. Add and
enable the device tree node on Tegra194.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Kartik <kkartik@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable the native timers on Tegra186 chips to allow using the watchdog
functionality to recover from system hangs.
Signed-off-by: Kartik <kkartik@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra234 uses the Control Backbone (CBB) version 2.0. Add the nodes
that enable error handling from the various CBB 2.0 fabrics found on
Tegra234.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add device tree nodes to enable error handling on the Control Backbone
(CBB). Tegra194 uses CBB version 1.0.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Tegra SYSRAM contains regions access to which is restricted to
certain hardware blocks on the system, and speculative accesses to
those will cause issues.
Patch 'misc: sram: Only map reserved areas in Tegra SYSRAM' attempted
to resolve this by only mapping the regions specified in the device
tree on the assumption that there are no such restricted areas within
the 64K-aligned area of memory that contains the memory we wish to map.
Turns out this assumption is wrong, as there are such areas above the
4K pages described in the device trees. As such, we need to use the
bigger hammer that is no-memory-wc, which causes the memory to be
mapped as Device memory to which speculative accesses are disallowed.
As such, the previous patch in the series,
'firmware: tegra: bpmp: do only aligned access to IPC memory area',
is required with this patch to make the BPMP driver only issue aligned
memory accesses as those are also required with Device memory.
Fixes: fec29bf049 ("misc: sram: Only map reserved areas in Tegra SYSRAM")
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add device tree nodes for Tegra234 GPCDMA
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Fix whitespace coding style: use single space instead of tabs or
multiple spaces around '=' sign in property assignment. No functional
changes (same DTB).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable OPE module usage on various Jetson platforms. This can be plugged
into an audio path using ALSA mixer controls. Add audio-graph-port binding
to use OPE device with generic audio-graph based sound card.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Output Processing Engine (OPE) is a client of AHUB and is present on
Tegra210 and later generations of Tegra SoC. Add this device on the
relevant SoC DTSI files.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
- Ethernet MAC and switch support for the RZ/N1 SoC on the RZN1D-DB
development board,
- AA1024XD12 panel overlay support for the Draak, Ebisu, and
Salvator-X(S) development boards,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYsfxkAAKCRCKwlD9ZEnx
cGKNAQC5Wl91yn3heD50V0vXjs6CqNm/bdrWOEmnwwlcnyClqQEAnQjTHs4iriar
110WP2JSNUoZwawygZFq0jHBgMVFOQA=
=LnAY
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=wgc5
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-dt-for-v5.20-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v5.20 (take two)
- Ethernet MAC and switch support for the RZ/N1 SoC on the RZN1D-DB
development board,
- AA1024XD12 panel overlay support for the Draak, Ebisu, and
Salvator-X(S) development boards,
- Miscellaneous fixes and improvements.
* tag 'renesas-arm-dt-for-v5.20-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: Add panel overlay for Draak and Ebisu boards
arm64: dts: renesas: Add panel overlay for Salvator-X(S) boards
arm64: dts: renesas: Prepare AA1024XD12 panel .dtsi for overlay support
arm64: dts: renesas: spider-cpu: Fix scif0/scif3 sort order
ARM: dts: r9a06g032-rzn1d400-db: Add switch description
dt-bindings: net: pcs: add bindings for Renesas RZ/N1 MII converter
ARM: dts: r9a06g032: Describe switch
ARM: dts: r9a06g032: Describe GMAC2
ARM: dts: r9a06g032: Describe MII converter
arm64: dts: renesas: r9a07g054l2-smarc: Correct SoC name in comment
ARM: dts: renesas: Fix DA9063 watchdog subnode names
arm64: dts: renesas: r8a779m8: Drop operating points above 1.5 GHz
Link: https://lore.kernel.org/r/cover.1657278845.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The proper name is 'keys', not 'scu-keys'.
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Both i.MX8QM and i.MX8DXL use the fallback fsl,scu-clk compatible.
They rely on the same driver generic part as the i.MX8QXP, so
lets add it to i.MX8QXP too, for consitency.
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The proper name is power-controller, not imx8qx-pd.
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
XTAL clocks are not exposed by SCU to OS via OS<->SCU communication protocol,
so remove unnecessary entries.
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add i.MX8MP NoC node to make the interconnect i.MX8MP driver could work.
Currently dynamic frequency scaling of the i.MX8MP NoC has not been
supported, only NoC initial settings are configured by interconnect
driver.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The bananapi R64 (BPI-R64) experiences wrong WPS button signals.
In OpenWrt pushing the WPS button while powering on the device will set
it to recovery mode. Currently, this also happens without any user
interaction. In particular, the wrong signals appear while booting the
device or restarting it, e.g. after doing a system upgrade. If the
device is in recovery mode the user needs to manually power cycle or
restart it.
The official BPI-R64 sources set the WPS button to GPIO_ACTIVE_LOW in
the device tree. This setting seems to suppress the unwanted WPS button
press signals. So this commit changes the button from GPIO_ACTIVE_HIGH to
GPIO_ACTIVE_LOW.
The official BPI-R64 sources can be found on
https://github.com/BPI-SINOVOIP/BPI-R64-openwrt
Fixes: 0b6286dd96 ("arm64: dts: mt7622: add bananapi BPI-R64 board")
Suggested-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Signed-off-by: Nick Hainke <vincent@systemli.org>
Link: https://lore.kernel.org/r/20220630111746.4098-1-vincent@systemli.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add axi clock since the driver change to DMA mode which need
to enable axi clock. And change spi clock to 26MHz as default.
Signed-off-by: Xiangsheng Hou <xiangsheng.hou@mediatek.com>
Link: https://lore.kernel.org/r/20220630090157.29486-2-xiangsheng.hou@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
This platform carries a HID compatible I2C touchscreen on the i2c4 bus,
but it may be at a different address, depending on the board model.
Add the node for a touchscreen at 0x10, but enable it only in the
final board dts.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220704101321.44835-12-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
This platform has a SPI NOR: enable support for it, completing the
storage compartment enablement for the entire platform.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220704101321.44835-11-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
All devices of the Cherry platform have a MT6360 sub-pmic,
providing two LDOs. Add the required node to enable the PMIC
but without regulators yet, as these will be added in a
later commit.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220704101321.44835-10-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add USB functionality by enabling the required PHYs and the XHCI
controllers.
This enables all of the supported USB ports on the Cherry boards.
Please note that u3phy1 also enables u3port1, which is configured
to be a PCI-Express PHY for the second PCIe controller that is
found on the MT8195 SoC, which will be enabled in a later commit.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220704101321.44835-9-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
This platform uses eight I2C controllers and one SPI controller:
in preparation for enabling devices attached to these controllers,
add basic configuration to enable the busses.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220704101321.44835-8-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add gpio-line-names to document GPIO names and add the default basic
pin configuration to allow lower power operation by setting appropriate
state on the unused pins.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220704101321.44835-7-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add mtk-sd controller and pin configuration to enable the internal
eMMC storage: now it is possible to mount a rootfs located at the
internal storage.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220704101321.44835-6-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
To allow MT6359 peripherals to trigger interrupts and the driver to
safely handle them, assign the right interrupt line for the Cherry
platform to the MT6359 PMIC node.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220704101321.44835-5-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add the regulators layout for this platform, including the basic power
rails controlled by the EC (and/or always on).
Moreover, include the MT6359 PMIC devicetree and add some configuration
for its regulators, essential to keep the machine alive after booting.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220704101321.44835-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Introduce the MT8195 Cherry Chromebook platform, including three
revisions of Cherry Tomato boards.
This basic configuration allows to boot Linux on all board revisions
and get a serial console from a ramdisk.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220704101321.44835-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add support for the SPI NOR flash memory present on the Asurada
platform.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220629155956.1138955-20-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Enable support for the SCP co-processor present on MT8192. It is used
as part of the video encoding and decoding processes.
A region of memory is carved out for its use, and remoteproc setup for
communication with the ChromeOS EC.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220629155956.1138955-19-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Enable both MMC controllers present on Asurada. MMC0 is for
non-removable internal memory, while MMC1 is an SD card slot. MMC1 isn't
used on all machines, but in those cases the CD interrupt is never
triggered and thus it is basically as if it was disabled.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220629155956.1138955-18-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The Asurada platform uses regulators from MT6315 PMICs acessible through
SPMI. Add support for them.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220629155956.1138955-17-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
MT6359 is the primary PMIC present on the Asurada platform. Include its
dtsi and configure properties specific for the platform.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220629155956.1138955-16-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Enable MT8192's PCIe controller and add support for the MT7921e WiFi
card that is present on that bus for the Asurada platform.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220629155956.1138955-15-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Enable XHCI controller on the Asurada platform. This allows the use of
the USB ports, and therefore a rootfs can be loaded and a usable shell
reached from a live USB image.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220629155956.1138955-14-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The Spherion board has keyboard backlight controlled by the PWM signal
generated by the ChromeOS EC.
Enable PWM output for ChromeOS EC and add a PWM controlled LED node for
the keyboard backlight.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220629155956.1138955-13-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
All machines of the Asurada platform have a touchscreen at address 0x10
in the I2C0 bus, but the devices vary: Spherion has the Elan eKTH3500
touchscreen, while Hayato has a generic HID-over-i2c touchscreen.
Add common support for the touchscreens on the platform and the
specifics in each board file.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220629155956.1138955-12-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add support for the Elan eKTH3000 i2c trackpad present on Asurada. It is
connected to the I2C2 bus and has address 0x15.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220629155956.1138955-11-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The Asurada platform has a Google Security Chip connected to the SPI5
bus. It runs the cr50 firmware and provides TPM functionality. Add
support for it.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220629155956.1138955-10-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Chromebooks' embedded keyboards differ from standard layouts for the
top row in that they have shortcuts in place of the standard function
keys. Map these keys to achieve the functionality that is pictured on
the printouts.
There's a minor difference between the keys present on Hayato, which
uses an older layout, and Spherion, which uses a newer one.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220629155956.1138955-9-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add support for the ChromeOS Embedded Controller present on the Asurada
platform. It is connected through the SPI1 bus and offers several
functionalities: base detection, PWM controller, I2C tunneling,
regulators, Type-C connector management, keyboard and Smart Battery
Metrics (SBS).
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220629155956.1138955-8-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The Asurada platform has five I2C controllers and two SPI controllers
that are used. In preparation for enabling the devices connected to
these controllers, enable and configure their busses.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220629155956.1138955-7-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add system-wide power supplies present on all of the boards in the
Asurada family.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220629155956.1138955-6-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add the gpio-line-names property to gpio-controller in order to
document the usage of GPIOs on the Asurada platform.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220629155956.1138955-5-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Introduce the MT8192 Asurada Chromebook platform, including the Asurada
Spherion and Asurada Hayato boards.
This is enough configuration to get serial output working on Spherion
and Hayato.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220629155956.1138955-4-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
This reverts commit e5b8d92189.
Pages mapped in user-space with PROT_MTE have the allocation tags either
zeroed or copied/restored to some user values. In order for the kernel
to access such pages via page_address(), resetting the tag in
page->flags was necessary. This tag resetting was deferred to
set_pte_at() -> mte_sync_page_tags() but it can race with another CPU
reading the flags (via page_to_virt()):
P0 (mte_sync_page_tags): P1 (memcpy from virt_to_page):
Rflags!=0xff
Wflags=0xff
DMB (doesn't help)
Wtags=0
Rtags=0 // fault
Since now the post_alloc_hook() function resets the page->flags tag when
unpoisoning is skipped for user pages (including the __GFP_ZEROTAGS
case), revert the arm64 commit calling page_kasan_tag_reset().
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Peter Collingbourne <pcc@google.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://lore.kernel.org/r/20220610152141.2148929-5-catalin.marinas@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Commit c275c5c6d5 ("kasan: disable freed user page poisoning with HW
tags") added __GFP_SKIP_KASAN_POISON to GFP_HIGHUSER_MOVABLE. A similar
argument can be made about unpoisoning, so also add
__GFP_SKIP_KASAN_UNPOISON to user pages. To ensure the user page is
still accessible via page_address() without a kasan fault, reset the
page->flags tag.
With the above changes, there is no need for the arm64
tag_clear_highpage() to reset the page->flags tag.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://lore.kernel.org/r/20220610152141.2148929-3-catalin.marinas@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Add a phandle to the MT8183_POWER_DOMAIN_MFG_ASYNC power domain and
assign the GPU VSRAM supply to this in mt8183-kukui: this allows to
keep the sram powered up while the GPU is used.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220623123850.110225-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The Draak and Ebisu boards support an optional LVDS panel. One
compatible panel is the Mitsubishi AA104XD12. Add a corresponding DT
overlay.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20211229193135.28767-4-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The Salvator-X and Salvator-XS boards support an optional LVDS panel.
One compatible panel is the Mitsubishi AA104XD12. Add a corresponding DT
overlay.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20211229193135.28767-3-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The Mitsubishi AA1024XD12 panel can be used for R-Car Gen2 and Gen3
boards as an optional external panel. It is described in the
arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi file as a direct child of the
DT root node. This allows including r8a77xx-aa104xd12-panel.dtsi in
board device trees, with other minor modifications, to enable the panel.
This is however not how external components should be modelled. Instead
of modifying the board device tree to enable the panel, it should be
compiled as a DT overlay, to be loaded by the boot loader.
Prepare the r8a77xx-aa104xd12-panel.dtsi file for this usage by
declaring a panel node only, without hardcoding its path. Overlay
sources can then include r8a77xx-aa104xd12-panel.dtsi where appropriate.
This change doesn't cause any regression as r8a77xx-aa104xd12-panel.dtsi
is currently unused. As overlay support for this panel has only been
tested with Gen3 hardware, and Gen2 support will require more
development, move the file to arch/arm64/boot/dts/renesas/.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20211229193135.28767-2-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Clean up the PCIe PHY nodes by using a non-empty ranges property.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220705114032.22787-14-johan+linaro@kernel.org
The QMP UFS PHY provides more than one symbol clock and would need an
index to differentiate the clocks, but none of this is described by the
binding currently.
Drop the incorrect '#clock-cells' property for now.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220705114032.22787-12-johan+linaro@kernel.org
The QMP UFS PHY provides more than one symbol clock and would need an
index to differentiate the clocks, but none of this is described by the
binding currently.
Drop the incorrect '#clock-cells' property for now.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220705114032.22787-11-johan+linaro@kernel.org
The QMP UFS PHY provides more than one symbol clock and would need an
index to differentiate the clocks, but none of this is described by the
binding currently.
Drop the incorrect '#clock-cells' property for now.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220705114032.22787-10-johan+linaro@kernel.org
The QMP USB PHY provides a single clock so drop the redundant clock
index.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220705114032.22787-8-johan+linaro@kernel.org
The QMP USB PHY provides a single clock so drop the redundant clock
index.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220705114032.22787-7-johan+linaro@kernel.org
The QMP USB PHY provides a single clock so drop the redundant clock
index.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220705114032.22787-5-johan+linaro@kernel.org
The QMP USB PHY provides a single clock so drop the redundant clock
index.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220705114032.22787-4-johan+linaro@kernel.org
This reverts commit afcbe252e9.
The commit in question caused my sc7280-herobrine-herobrine-r1 board
not to boot anymore. This shouldn't be too surprising since the driver
is relying on the name "cqhci".
The issue seems to be that someone decided to change the names of
things when the binding moved from .txt to .yaml. We should go back to
the names that the bindings have historically specified.
For some history, see commit d3392339ca ("mmc: cqhci: Update cqhci
memory ioresource name") and commit d79100c91a ("dt-bindings: mmc:
sdhci-msm: Add CQE reg map").
Fixes: afcbe252e9 ("arm64: dts: qcom: Fix 'reg-names' for sdhci nodes")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220706144706.1.I48f35820bf3670d54940110462555c2d0a6d5eb2@changeid
To ease merging of bindings and dts files, the constants were replaced
with numeric values. Change them back to defined constants.
While we are at it, fix the indentation of these clocks properties to
follow established guidelines.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220706145412.1566011-2-dmitry.baryshkov@linaro.org
Add reset to SDHCI controller so it can be reset to avoid timeout issues
after software reset due to bootloader set configuration.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220704143554.1180927-2-robimarko@gmail.com
Add device node for CPU-memory BWMON device (bandwidth monitoring) on
SDM845 measuring bandwidth between CPU (gladiator_noc) and Last Level
Cache (memnoc). Usage of this BWMON allows to remove fixed bandwidth
votes from cpufreq (CPU nodes) thus achieve high memory throughput even
with lower CPU frequencies.
Co-developed-by: Thara Gopinath <thara.gopinath@gmail.com>
Signed-off-by: Thara Gopinath <thara.gopinath@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220704121730.127925-5-krzysztof.kozlowski@linaro.org
The ARM timer is usually considered not part of SoC node, just like
other ARM designed blocks (PMU, PSCI). This fixes dtbs_check warning:
arch/arm64/boot/dts/qcom/ipq8072-ax9000.dtb: soc: timer: {'compatible': ['arm,armv8-timer'], 'interrupts': [[1, 2, 3848], [1, 3, 3848], [1, 4, 3848], [1, 1, 3848]]} should not be valid under {'type': 'object'}
From schema: dtschema/schemas/simple-bus.yaml
Signed-off-by: Robert Marko <robimarko@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[bjorn: Moved node after "soc" for alphabetical ordering]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220704113318.623102-1-robimarko@gmail.com
Both vdda-1p2-supply and vdda-0p9-supply regulators are controlled
by dp combo phy. Therefore remove them from dp controller.
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1656690436-15221-1-git-send-email-quic_khsieh@quicinc.com
Switch from the flat PC idle states of sdm845 to OSI hierarchical idle
states. The exceptions are the cheza plaftorms, which need to remain with
PC idle states. So in order allow all the other platforms to switch,
while cheza platforms to remain the same, replace the PC idle states with
the OSI ones in the main SDM845 dtsi, and then override the inherited OSI
states with PC ones, delete inherited psci cpus nodes, domain idle states
and power domain properties.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220630101403.1888541-1-abel.vesa@linaro.org
First device specific compatible, then general one.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220626183247.142776-2-david@ixit.cz
Adds initial support for the LG G7 (judyln) and
LG V35 (judyp) phones.
Currently supported features:
- Display via simplefb (panel driver is WIP)
- Keys
- Micro SD card
- Modem (not tested much, but initialises)
- UFS (crashes during intensive workloads, may need quirks)
- USB in peripheral mode
Notable missing features:
- Enabling WiFi causes a remoteproc crash, so it's disabled here.
Needs to be debugged - ideas welcome!
Signed-off-by: Anton Bambura <jenneron@protonmail.com>
Signed-off-by: Stefan Hansson <newbie13xd@gmail.com>
Tested-by: Gregari Ivanov <llamashere@posteo.de>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220626164536.16011-2-newbie13xd@gmail.com
Add missing GCC clock sources. This includes PCIe and USB PIPE and UFS
symbol clocks.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220620071936.1558906-4-dmitry.baryshkov@linaro.org
The commit 82d61e19fc ("arm64: dts: qcom: msm8996: Move '#clock-cells'
to QMP PHY child node") moved the '#clock-cells' properties to the child
nodes. However it missed the fact that the property must have been set
to <0> (as all pipe clocks use of_clk_hw_simple_get as the xlate
function. Also the mentioned commit didn't add '#clock-cells' properties
to second and third PCIe PHY nodes. Correct both these mistakes:
- Set '#clock-cells' to <0>,
- Add the property to pciephy_1 and pciephy_2 nodes.
Fixes: 82d61e19fc ("arm64: dts: qcom: msm8996: Move '#clock-cells' to QMP PHY child node")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220620071936.1558906-3-dmitry.baryshkov@linaro.org
Enable the Qualcomm Bandwidth Monitor to allow scaling interconnects
depending on bandwidth usage between CPU and memory. This is used
already on Qualcomm SDM845 SoC.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220704121730.127925-4-krzysztof.kozlowski@linaro.org
According to qcom,sm6125-pinctrl.yaml all nodes inside the tlmm must be
suffixed by -state:
qcom/sm6125-sony-xperia-seine-pdx201.dtb: pinctrl@500000: 'sdc2-off', 'sdc2-on' do not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
The label names have been updated to match, going from sdc2_state_X to
sdc2_X_state.
Fixes: cff4bbaf2a ("arm64: dts: qcom: Add support for SM6125")
Fixes: 82e1783890 ("arm64: dts: qcom: sm6125: Add support for Sony Xperia 10II")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220508100336.127176-2-marijn.suijten@somainline.org
Both the sdc2-on and sdc2-off pinctrl nodes are used by the
sdhci@4784000 node in sm6125.dtsi. Surprisingly sdc2-off is defined in
sm6125, yet its sdc2-on counterpart is only defined in board-specific DT
for the Sony Seine PDX201 board/device resulting in an "undefined label
&sdc2_state_on" error if sm6125.dtsi were included elsewhere.
This sm6125 base dtsi should not rely on externally defined labels; the
properties referencing it should then also be written externally.
Since the sdc2-on pin configuration is board-independent just like
sdc2-off, move it from seine-pdx201.dts into sm6125.dtsi.
The SDCard-detect pin (gpio98) is however board-specific, and remains as
an overwrite in seine-pdx201.dts for both the on and off state.
As a drive-by cleanup, reorder bias- and drive-strength properties.
Fixes: cff4bbaf2a ("arm64: dts: qcom: Add support for SM6125")
Fixes: 82e1783890 ("arm64: dts: qcom: sm6125: Add support for Sony Xperia 10II")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220508100336.127176-1-marijn.suijten@somainline.org
The db820c has 4 "user LEDs", all connected to the PMI8994. The first
three are connected to the three current sinks provided by the TRILED
and the fourth is connected to MPP2.
By utilizing the DTEST bus the MPP is fed the control signal from the
fourth LPG block, providing a consistent interface to the user.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Dylan Van Assche <me@dylanvanassche.be>
Link: https://lore.kernel.org/r/20220505022706.1692554-5-bjorn.andersson@linaro.org
The pmi8994 has 4 multi-purpose-pins, add these to the definition.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Dylan Van Assche <me@dylanvanassche.be>
Link: https://lore.kernel.org/r/20220505022706.1692554-4-bjorn.andersson@linaro.org
The DB845c has 4 "user LEDs", the last one is already supported as it's
just wired to a gpio. Now that the LPG binding is in place we can wire
up the other 3 LEDs as well.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Caleb Connolly <caleb@connolly.tech>
Reviewed-by: Dylan Van Assche <me@dylanvanassche.be>
Link: https://lore.kernel.org/r/20220505022706.1692554-3-bjorn.andersson@linaro.org
Add PWM/LPG nodes to the PMICs currently supported by the binding.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Caleb Connolly <caleb@connolly.tech>
Reviewed-by: Dylan Van Assche <me@dylanvanassche.be>
Link: https://lore.kernel.org/r/20220505022706.1692554-2-bjorn.andersson@linaro.org
Replace &rpmhpd power domain integers with their respective defines
in order to improve legibility.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220706152830.2021197-1-robert.foss@linaro.org
Just a small bunch of miscellaneous updates: addition of missing
cache-level property to L2 caches on Juno, whitespace adjustments
and removal of erroneous 'mbox-name' and 'panel-dpi' compatible in
the device tree nodes.
-----BEGIN PGP SIGNATURE-----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=ZJmi
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=OxuR
-----END PGP SIGNATURE-----
Merge tag 'juno-updates-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/dt
Armv8 Juno/FVP updates for v5.20
Just a small bunch of miscellaneous updates: addition of missing
cache-level property to L2 caches on Juno, whitespace adjustments
and removal of erroneous 'mbox-name' and 'panel-dpi' compatible in
the device tree nodes.
* tag 'juno-updates-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno: Add cache-level property to L2 caches
arm64: dts: arm: adjust whitespace around '='
arm64: dts: arm/juno: Drop erroneous 'mbox-name' property
arm64: dts: arm/fvp-base-revc: Remove 'panel-dpi' compatible
Link: https://lore.kernel.org/r/20220706115026.2272643-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
on rk356x in general plus necessary board-specific changes on Rock-3A,
Quartz64-A, rk3568-evb, BPI-R2-Pro.
A number of additional peripherals on BPI-R2-Pro (gpu, thermal, rtc) and
PCIe2x1 support on rk3568 and enablement on Quart64-A as well as a number
of additional peripherals to this board (sfc node, sdr-104 support, fan).
And finally touch panel support for rockpro64 and some misc dt cleanups
(node names for dtschema and styling).
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmLEGlUQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgcG+CACtfU9yrfAxElsWY2cxkPJm3nV+rA6jO3VX
HLPFjyQ6XJlpHGQrKge38HPCaq/8tynxgt4mykdE3mUn7I8OCTylzW5OUtue4yJU
D35JHQbuhk79MlfgkD7Wp2iz9jwB64JgeCLzbVfUq5f7CiBqc9R1StWZwYqdlJ87
PS3dAGfO6hswJmbF2f4u2bc0OzPfQs0KkreiN2YkfmzffMo28VDGmumj2IPEPGEI
h7eHLrJT721YTaXXkErd0j9Fen6lngQybGoLGThBYxzLrfshRulW1uR6Ykx1PQBA
rz3nq9YhHaWz0uVn6EIN95c76LLkgU/WE5dypjduT12i21wQ/42y
=shlA
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=owCF
-----END PGP SIGNATURE-----
Merge tag 'v5.20-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
New board the Radxa Rock Pi S, enablement of graphics support and hdmi-audio
on rk356x in general plus necessary board-specific changes on Rock-3A,
Quartz64-A, rk3568-evb, BPI-R2-Pro.
A number of additional peripherals on BPI-R2-Pro (gpu, thermal, rtc) and
PCIe2x1 support on rk3568 and enablement on Quart64-A as well as a number
of additional peripherals to this board (sfc node, sdr-104 support, fan).
And finally touch panel support for rockpro64 and some misc dt cleanups
(node names for dtschema and styling).
* tag 'v5.20-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (27 commits)
arm64: dts: rockchip: enable hdmi tx audio on rock-3a
arm64: dts: rockchip: enable hdmi tx audio on rk3568-evb1-v10
arm64: dts: rockchip: align gpio-key node names with dtschema
arm64: dts: rockchip: rock-pi-s add more peripherals
arm64: dts: rockchip: add ROCK Pi S DTS support
dt-bindings: arm: rockchip: Add Radxa ROCK Pi S
arm64: dts: rockchip: Add missing space around regulator-name on rk3368-orion-r68
arm64: dts: rockchip: enable the gpu on BPI-R2-Pro
arm64: dts: rockchip: configure thermal shutdown for BPI-R2-Pro
arm64: dts: rockchip: Enable HDMI audio on BPI R2 Pro
arm64: dts: rockchip: enable vop2 and hdmi tx on BPI-R2-Pro
arm64: dts: rockchip: set display regulators to always-on on BPI-R2-Pro
arm64: dts: rockchip: add RTC to BPI-R2 Pro
arm64: dts: rockchip: Enable HDMI audio on Quartz64 A
arm64: dts: rockchip: Add HDMI audio nodes to rk356x
arm64: dts: rockchip: adjust whitespace around '='
arm64: dts: rockchip: enable vop2 and hdmi tx on rock-3a
arm64: dts: rockchip: enable vop2 and hdmi tx on quartz64a
arm64: dts: rockchip: rk3568-evb: Enable VOP2 and hdmi
arm64: dts: rockchip: rk356x: Add HDMI nodes
...
Link: https://lore.kernel.org/r/40088956.J2Yia2DhmK@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Although harmless, the return statement in kvm_unexpected_el2_exception
is rather confusing as the function itself has a void return type. The
C standard is also pretty clear that "A return statement with an
expression shall not appear in a function whose return type is void".
Given that this return statement does not seem to add any actual value,
let's not pointlessly violate the standard.
Build-tested with GCC 10 and CLANG 13 for good measure, the disassembled
code is identical with or without the return statement.
Fixes: e9ee186bb7 ("KVM: arm64: Add kvm_extable for vaxorcism code")
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220705142310.3847918-1-qperret@google.com
The RCU dynticks counter is going to be merged into the context tracking
subsystem. Prepare with moving the NMI extended quiescent states
entrypoints to context tracking. For now those are dumb redirection to
existing RCU calls.
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Paul Gortmaker<paul.gortmaker@windriver.com>
Cc: Alex Belits <abelits@marvell.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
The RCU dynticks counter is going to be merged into the context tracking
subsystem. Prepare with moving the IRQ extended quiescent states
entrypoints to context tracking. For now those are dumb redirection to
existing RCU calls.
[ paulmck: Apply Stephen Rothwell feedback from -next. ]
[ paulmck: Apply Nathan Chancellor feedback. ]
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Paul Gortmaker<paul.gortmaker@windriver.com>
Cc: Alex Belits <abelits@marvell.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
The I2C controllers in the A100 SoC are newer-generation hardware
which includes an offload engine. Signify that by including the
allwinner,sun8i-v536-i2c fallback compatible, as V536 is the first
SoC with this generation of I2C controller.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220702052544.31443-2-samuel@sholland.org
Cortex-A510 is affected by an erratum where in rare circumstances the
CPUs may not handle a race between a break-before-make sequence on one
CPU, and another CPU accessing the same page. This could allow a store
to a page that has been unmapped.
Work around this by adding the affected CPUs to the list that needs
TLB sequences to be done twice.
Signed-off-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20220704155732.21216-1-james.morse@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Automatically generate defines for ID_AA64ISAR2_EL1, using the definitions
in DDI0487H.a. No functional changes.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220704170302.2609529-22-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Automatically generate defines for ID_AA64ISAR1_EL1, using the definitions
in DDI0487H.a. No functional changes.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220704170302.2609529-21-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Normally we include the full register name in the defines for fields within
registers but this has not been followed for ID registers. In preparation
for automatic generation of defines add the _EL1s into the defines for
ID_AA64ISAR2_EL1 to follow the convention. No functional changes.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220704170302.2609529-17-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Normally we include the full register name in the defines for fields within
registers but this has not been followed for ID registers. In preparation
for automatic generation of defines add the _EL1s into the defines for
ID_AA64ISAR1_EL1 to follow the convention. No functional changes.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220704170302.2609529-16-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
We have defines for the RPRES enumeration in ID_AA64ISAR2 which do not
follow our normal conventions. Since these defines are never used just
remove them. No functional changes.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220704170302.2609529-15-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
The various defines for bitfields in ID_AA64ZFR0_EL1 do not follow our
conventions for register field names, they omit the _EL1, they don't use
specific defines for enumeration values and they don't follow the naming
in the architecture in some cases. In preparation for automatic generation
bring them into line with convention. No functional changes.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220704170302.2609529-14-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
We have a series of defines for enumeration values we test for in the
fields in ID_AA64SMFR0_EL1 which do not follow our usual convention of
including the EL1 in the name and having _IMP at the end of the basic
"feature present" define. In preparation for automatic register
generation bring the defines into sync with convention, no functional
change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220704170302.2609529-13-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
The defines for WFxT refer to the feature as WFXT and use SUPPORTED rather
than IMP. In preparation for automatic generation of defines update these
to be more standard. No functional changes.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220704170302.2609529-12-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
The architecture refers to the field identifying support for BHB clear as
BC but the kernel has called it CLEARBHB. In preparation for generation of
defines for ID_AA64ISAR2_EL1 rename to use the architecture's naming. No
functional changes.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220704170302.2609529-11-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
The defines used for the pointer authentication feature enumerations do not
follow the naming convention we've decided to use where we name things
after the architecture feature that introduced. Prepare for generating the
defines for the ISA ID registers by updating to use the feature names.
No functional changes.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220704170302.2609529-10-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Usually our defines for bitfields in system registers do not include a SYS_
prefix but those for GMID do. In preparation for automatic generation of
defines remove that prefix. No functional change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220704170302.2609529-9-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
The constants defining field names for DCZID_EL0 do not include the _EL0
that is included as part of our standard naming scheme. In preparation
for automatic generation of the defines add the _EL0 in. No functional
change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220704170302.2609529-8-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
cache.h contains some defines which are used to represent fields and
enumeration values which do not follow the standard naming convention used for
when we automatically generate defines for system registers. Update the
names of the constants to reflect standardised naming and move them to
sysreg.h.
There is also a helper CTR_L1IP() which was open coded and has been
converted to use SYS_FIELD_GET().
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220704170302.2609529-7-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Future changes to generate register definitions automatically will cause
this header to be included in a linker script. This will mean that headers
it in turn includes that are not safe for use in such a context (eg, due
to the use of assembler macros) cause build problems. Avoid these issues by
moving the affected includes and associated defines to the section of the
file already guarded by ifndef __ASSEMBLY__.
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220704170302.2609529-6-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Add a SYS_FIELD_GET() helper to match SYS_FIELD_PREP(), providing a
simplified interface to FIELD_GET() when using the generated defines
with standardized naming.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220704170302.2609529-5-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Currently we only accept comments where the # is placed at the start of a
line, allow leading blanks so we can format comments inside definitions in
a more pleasing manner.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220704170302.2609529-4-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Quite a few of the overrides in idreg-override.c have a mix of tabs and
spaces in their definitions, fix these.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220704170302.2609529-3-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
In 155433cb36 ("arm64: cache: Remove support for ASID-tagged VIVT
I-caches") we removed all the support fir AIVIVT cache types and renamed
all references to the field to say "unknown" since support for AIVIVT
caches was removed from the architecture. Some confusion has resulted since
the corresponding change to the architecture left the value named as
AIVIVT but documented it as reserved in v8, refactor the code so we don't
define the constant instead. This will help with automatic generation of
this register field since it means we care less about the correspondence
with the ARM.
No functional change, the value displayed to userspace is unchanged.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220704170302.2609529-2-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Crash kernel memory reservation gets deferred, when either CONFIG_ZONE_DMA
or CONFIG_ZONE_DMA32 config is enabled on the platform. This deferral also
impacts overall linear mapping creation including the crash kernel itself.
Just encapsulate this deferral check in a new helper for better clarity.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20220705062556.1845734-1-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Universal Serial Interface (USI) supports three types of serial interface
such as Universal Asynchronous Receiver and Transmitter (UART), Serial
Peripheral Interface (SPI), and Inter-Integrated Circuit (I2C).
Each protocols can be working independently and configured as one of
those using external configuration inputs.
Exynos Auto v9 SoC support 12 USIs. When a USI uses two pins such as i2c
and 3 wire uarts(RX/TX only), we can use remain two pins as i2c mode.
So, we can define one USI node that includes serial/spi and hsi2c.
usi_i2c nodes can be used only for i2c mode.
We can have below combinations for one USI.
1) The usi node is used either 4 pin uart or 4 pin spi
-> No usi_i2c can be used
2) The usi node is used 2 pin uart(RX/TX) and i2c(SDA/SCL)
-> usi_i2c should be enabled to use the latter i2c
3) The usi node is used i2c(SDA/SCL) and i2c(SDA/SCL)
-> usi_i2c should be enabled to use the latter i2c
By default, all USIs are initially set to uart mode by below setting.
samsung,mode = <USI_V2_UART>;
You can change it either USI_V2_SPI or USI_V2_I2C.
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220701015226.32781-6-chanho61.park@samsung.com
Before adding whole USI nodes, this applies the changes of usi0 in
advance. To be the usi0 and serian_0 nodes as SoC default, some
properties should be moved to exynosautov9-sadk.dts.
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220701015226.32781-5-chanho61.park@samsung.com
Add interconnect providers for the multiple NoCs available on the platform,
and assign interconnects used by some blocks.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211021132329.234942-6-y.oudjana@protonmail.com
The clocks property is now mandatory. Add it to avoid warning message.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Fixes: eba5bea8f3 ("arm64: dts: ls1028a: add efuse node")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds an SFP node for Trust Architecture 3.0 devices.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds an appropriate SFP node for Trust Architecture 2.1 devices.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Allwinner provide an audio CODEC as part of their SoCs which is used on a
number of designs, enable the driver as part of defconfig in order to
improve coverage of this in the various automated testing systems.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220701112213.1765599-1-broonie@kernel.org
"status" does not match any pattern in the gpio-leds binding. Rename the
node to the preferred pattern. This fixes a `make dtbs_check` error.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220702132816.46456-1-samuel@sholland.org
Another set of minor patches for Arm DTS files and soc specific drivers:
- More reference counting bug fixes for DT nodes, and other
trivial code fixes
- Multiple code fixes for the Arm SCMI firmware driver to improve
compatibility with firmware implementations.
- A patch series for at91 to address power management issues from
using the wrong DT compatible properties.
- A series of patches to fix pad settings for NXP imx8mp to leave the
configuration untouched from the boot loader
- Additional DT fixes for qualcomm and NXP platforms
- A boot time fix for stm32mp15 DT
- Konrad Dybcio becomes an additional reviewer for the Qualcomm
platforms
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmLDCBUACgkQmmx57+YA
GNnWoRAAkyuPRlFCOz7Ul5XcywCpNfeqBnHyCs+s1zASK5N00OIEA0knxmk+HEbo
NLELeH8yHAPVOgjT4J2FSB756QPq7zOs8LjcGTxYwPbAxxBAHKtbVujh56UMxg19
zhIE99WyGhF8rkwciHelTsHRdWdFcVEy1NCdxJSsH5SW2EQZiMsOWT7uRIe8xBFH
XIXOmLAwNGvFVLKI+43ZQZFErZd2wFDv6oZ8eIrLAr0I2A7/ak66DKEzT7a7EcdU
ozzcxi64QqDHcTHQGGGCx3qFIqkPs/qKOY4kweNnEqjzu9pQyiZxw+tBCFOu/EyB
FgSsZy7qvT/lsl34Ty07Mu4Ztf41KfJqtq1h71YHwgD1vV17FZHHg5SNH+FctIgH
t4DkisiJ6nKNB1czEq4YjYqlxt2UECmdOypLlZSGbjvip/TWnxEO7dm13nv9jO2I
wnTLUbq03ZG3ijW72f8hFkBi8JsXUVed5OJ99f8CzOOOFuzmuraWNzKSKtcV7vqJ
rLilZEu+LFmY+qt6ZemANz+V9oMM3WfOJocFQWGCgT+jwwNcIdmyB1EFChocamDG
nBphxXgFepGj5sStimy/b20QkU2kyQpZCd0VUKwbvMqTqp0Tk1BceP/WLKmgQLjY
dp8a9dunazGRKlzztZRqUIwVRY/bjszPpVby/BQzwdoOIVkKg94=
=5KYh
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Another set of minor patches for Arm DTS files and soc specific
drivers:
- More reference counting bug fixes for DT nodes, and other trivial
code fixes
- Multiple code fixes for the Arm SCMI firmware driver to improve
compatibility with firmware implementations.
- A patch series for at91 to address power management issues from
using the wrong DT compatible properties.
- A series of patches to fix pad settings for NXP imx8mp to leave the
configuration untouched from the boot loader
- Additional DT fixes for qualcomm and NXP platforms
- A boot time fix for stm32mp15 DT
- Konrad Dybcio becomes an additional reviewer for the Qualcomm
platforms"
* tag 'soc-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (42 commits)
soc: qcom: smem: use correct format characters
ARM: dts: stm32: add missing usbh clock and fix clk order on stm32mp15
ARM: dts: stm32: delete fixed clock node on STM32MP15-SCMI
ARM: dts: stm32: DSI should use LSE SCMI clock on DK1/ED1 STM32 board
ARM: dts: stm32: use the correct clock source for CEC on stm32mp151
ARM: dts: stm32: fix pwr regulators references to use scmi
soc: ixp4xx/npe: Fix unused match warning
ARM: at91: pm: Mark at91_pm_secure_init as __init
ARM: at91: fix soc detection for SAM9X60 SiPs
ARM: dts: at91: sama5d2_icp: fix eeprom compatibles
ARM: dts: at91: sam9x60ek: fix eeprom compatible and size
ARM: at91: pm: use proper compatibles for sama7g5's rtc and rtt
ARM: at91: pm: use proper compatibles for sam9x60's rtc and rtt
ARM: at91: pm: use proper compatible for sama5d2's rtc
arm64: dts: qcom: msm8992-*: Fix vdd_lvs1_2-supply typo
firmware: arm_scmi: Remove usage of the deprecated ida_simple_xxx API
firmware: arm_scmi: Fix response size warning for OPTEE transport
arm64: dts: imx8mp-icore-mx8mp-edim2.2: correct pad settings
arm64: dts: imx8mp-phyboard-pollux-rdk: correct i2c2 & mmc settings
arm64: dts: imx8mp-phyboard-pollux-rdk: correct eqos pad settings
...
Since the cacheinfo LLC information is used directly in arch_topology,
there is no need to parse and fetch the LLC ID information only for
ACPI systems.
Just drop the redundant parsing and setting of llc_id in CPU topology
from ACPI PPTT.
Link: https://lore.kernel.org/r/20220704101605.1318280-12-sudeep.holla@arm.com
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
emulation_proc_handler() changes table->data for proc_dointvec_minmax
and can generate the following Oops if called concurrently with itself:
| Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
| Internal error: Oops: 96000006 [#1] SMP
| Call trace:
| update_insn_emulation_mode+0xc0/0x148
| emulation_proc_handler+0x64/0xb8
| proc_sys_call_handler+0x9c/0xf8
| proc_sys_write+0x18/0x20
| __vfs_write+0x20/0x48
| vfs_write+0xe4/0x1d0
| ksys_write+0x70/0xf8
| __arm64_sys_write+0x20/0x28
| el0_svc_common.constprop.0+0x7c/0x1c0
| el0_svc_handler+0x2c/0xa0
| el0_svc+0x8/0x200
To fix this issue, keep the table->data as &insn->current_mode and
use container_of() to retrieve the insn pointer. Another mutex is
used to protect against the current_mode update but not for retrieving
insn_emulation as table->data is no longer changing.
Co-developed-by: hewenliang <hewenliang4@huawei.com>
Signed-off-by: hewenliang <hewenliang4@huawei.com>
Signed-off-by: Haibin Zhang <haibinzhang@tencent.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220128090324.2727688-1-hewenliang4@huawei.com
Link: https://lore.kernel.org/r/9A004C03-250B-46C5-BF39-782D7551B00E@tencent.com
Signed-off-by: Will Deacon <will@kernel.org>
Commit e5251fd430 ("mm/hugetlb: introduce set_huge_swap_pte_at()
helper") add set_huge_swap_pte_at() to handle swap entries on
architectures that support hugepages consisting of contiguous ptes. And
currently the set_huge_swap_pte_at() is only overridden by arm64.
set_huge_swap_pte_at() provide a sz parameter to help determine the number
of entries to be updated. But in fact, all hugetlb swap entries contain
pfn information, so we can find the corresponding folio through the pfn
recorded in the swap entry, then the folio_size() is the number of entries
that need to be updated.
And considering that users will easily cause bugs by ignoring the
difference between set_huge_swap_pte_at() and set_huge_pte_at(). Let's
handle swap entries in set_huge_pte_at() and remove the
set_huge_swap_pte_at(), then we can call set_huge_pte_at() anywhere, which
simplifies our coding.
Link: https://lkml.kernel.org/r/20220626145717.53572-1-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This removes duplicate includes in the sc7180-trogdor files, which
accidentally ended up disabling nodes intended to be enabled.
It corrects identifiers for CPU6/7 on MSM8994. On SM8450 the UFS node's
interconnects property is updated to match the #interconnect-cells,
avoiding sync_state issues and the GIC ITS is defined, to correct the
references from the PCIe nodes. On SDM845 the display subsystem's AHB
clock is corrected and on msm8992 devices, the supplies for lvs 1 and 2
are correctly specified.
Lastly, a welcome addition of Konrad as reviewer for the Qualcomm SoC.
-----BEGIN PGP SIGNATURE-----
iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmLBBmobHGJqb3JuLmFu
ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FuvsQAKP6BXA5FQ13nHdfFh38
kgNdw93SIn49MW7jxHbnYRXxxW0j1SxxipQAZmlfChE3qptfjzaQcdtN/AboNLi8
sBT03vjoMPysoe9aLOEY3BLCsM/qB3AiP5jXEahu8P3RbU6cY69W8mUEoZhzBi3H
Cow0g0zg37R48W7DZkh+B0rDzFk48TGzbnrBCwrJ4PF3cciNVKZOWmBMA3Vm0741
vckIU1WCff3v56ZyAusv4wmDBq5Y0K5/PCx4xz3qoFXBXoH27I0XxywXgbb2tmtH
MqxeOjS+hwJePW3dqMs2h09z0Uf5NT2cgoobCMkNOl3j/0Dwrn0zINRxBVNCLVDq
h084fcFxKqQWWbN+SDO5QUIyPgAs/XVyG8nzEXE19XftOIu9NGfTBOYZZ2kWGZCM
IJIFfvxm6Xh73dd0afDRRMbxZrpLaBrq0vz4jF3A3Ycs7r5JEgsz18H1yo/YzGX0
sXlTdTBUEaHZnfhQNfsNdVXaFcXWu0gLmH/sh7nRd++9Gl4d0r0Ro9Q/ZYfThsRI
vWQWuhLq15JL2c/qGxK/BTHIdN/+d4v3pr5CirM+ijKUZjzyAsB6e6i6gf4WNEUi
EdDf3Sj7IWOIAx4/80Xg+r+4MfCW5ZWKGSxIlpYFX83bSh2uM2Zopjiwg1qxw70k
RgtLmTxsC22YnwWcks49OjWV
=sObb
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmLB/d8ACgkQmmx57+YA
GNniWw/+NMqJ3hrizjmDS3sk2feWr6fU96gGYZ8myD/Qkw/5Kx3tOztf6mvU2SHm
SGWyhIT72SalATxyH0EDzrx8UG/wcdXXN/3xwTnLS5BtwgqdjcltV33zD3WvcQVu
Waswso1ULQH9NyWib+1aB5fFGJNUMtqWvGLBUJO2gQNphojTpICdHJKbe8B/VzXY
z5n/3yOiaoOdpjy2p65Fi6LTlEmeZY5NtiZL5aIw83728eJILcLmX0vjtuGvG3df
qp8HmFDhTYimQVqQC9bhG84lQSyGsos8/4ntxiYZddgL1ukmRRFb8ZAk9Vbvqkb8
8RK8v7J75uKFF0SIQ8j0OOHN/J7SrrTCuvUlE+pjL+HpTFMwJm+wlPAvPUZl3Szg
nMIExwZHklnzkW+mqTeQGm/RFzErAXPARuu4pmgy+6J01Az29qNq5S7TiszxKbSm
cTPaPZCNLvAAHsZ4VudG6wzT56QB8NEv6ktvKELQ+e74x9AYe+unn3Url1vCTir6
QjT/A3EoPf8bMQJAJNXMDOThVU7RNBEvi1kli8H6vGqvnTCedRCovso/ntAyvyF3
dTV1CHIjVo9f/LN8TrxBIj2mUl4u0dGT5JCtQXWqJNKprkrXLOdH7I5DsVwAcJkY
pWWpf8Nr1yMWSBa2gRs5zhR9dq0xJK8HX3+E5OfbN5Wum7AKrkw=
=+pwl
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-fixes-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm ARM64 DT fixes for v5.19
This removes duplicate includes in the sc7180-trogdor files, which
accidentally ended up disabling nodes intended to be enabled.
It corrects identifiers for CPU6/7 on MSM8994. On SM8450 the UFS node's
interconnects property is updated to match the #interconnect-cells,
avoiding sync_state issues and the GIC ITS is defined, to correct the
references from the PCIe nodes. On SDM845 the display subsystem's AHB
clock is corrected and on msm8992 devices, the supplies for lvs 1 and 2
are correctly specified.
Lastly, a welcome addition of Konrad as reviewer for the Qualcomm SoC.
* tag 'qcom-arm64-fixes-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: msm8992-*: Fix vdd_lvs1_2-supply typo
MAINTAINERS: Add myself as a reviewer for Qualcomm ARM/64 support
arm64: dts: qcom: sdm845: use dispcc AHB clock for mdss node
arm64: dts: qcom: sm8450 add ITS device tree node
arm64: dts: qcom: msm8994: Fix CPU6/7 reg values
arm64: dts: qcom: sm8450: fix interconnects property of UFS node
arm64: dts: qcom: Remove duplicate sc7180-trogdor include on lazor/homestar
Link: https://lore.kernel.org/r/20220703030208.408109-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This removes duplicate includes in the sc7180-trogdor files, which
accidentally ended up disabling nodes intended to be enabled.
It corrects identifiers for CPU6/7 on MSM8994. On SM8450 the UFS node's
interconnects property is updated to match the #interconnect-cells,
avoiding sync_state issues and the GIC ITS is defined, to correct the
references from the PCIe nodes. On SDM845 the display subsystem's AHB
clock is corrected and on msm8992 devices, the supplies for lvs 1 and 2
are correctly specified.
Lastly, a welcome addition of Konrad as reviewer for the Qualcomm SoC.
-----BEGIN PGP SIGNATURE-----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=sObb
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-fixes-for-5.19' into arm64-for-5.20
This merges the 'qcom-arm64-fixes-for-5.19' tag into arm64-for-5.20 to
handle the merge conflict related to the header file changes in
sc7180-trogdor.
Trogdor devices that have a detachable keyboard still have a
non-detachable keyboard input device present because we include the
cros-ec-keyboard.dtsi snippet in the top-level sc7180-trogdor.dtsi file
that every variant board includes. We do this because the
keyboard-controller node also provides some buttons like the power
button and volume buttons. Unfortunately, this means we register a
keyboard input device that doesn't do anything on boards with a
detachable keyboard.
Change the node's compatible on detachables to the newly introduced
"google,cros-ec-keyb-switches" compatible to indicate that there are
only switches and no keyboard to register. Similarly, move the keyboard
include that defines the keyboard-controller node out of
sc7180-trogdor.dtsi to boards that actually have a keyboard so that the
matrix properties are not defined on boards with the switches
compatible. Future boards can either use the include approach or the
node definition approach to describe a keyboard with possible switches
or just some switches.
Cc: Benson Leung <bleung@chromium.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: "Joseph S. Barrera III" <joebar@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220627212802.3593012-1-swboyd@chromium.org
Per schema it should be nand-controller@79b0000 instead of nand@79b0000.
Fix it to match nand-controller.yaml requirements.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220621120642.518575-1-robimarko@gmail.com
Both a53pll and rpmcc make use of xo as a clock parent. Add it to the
respective device nodes.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220620010519.1533364-1-dmitry.baryshkov@linaro.org
Add device nodes for the DSI1, second DSI interface found on
MSM8996/APQ8096 platforms. For example on db820c it is routed to the
secondary HS expansion connector.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220617103652.606250-1-dmitry.baryshkov@linaro.org
This is an SMMU for the adreno gpu, and adding this compatible lets
the driver use per-fd page tables, which are required for security
between GPU clients.
Signed-off-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[bjorn: Move arm,smmu-500 last, per Dmitry's request]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220614230136.3726047-2-emma@anholt.net
A3, A5 and most of the Samsung phones with MSM8916 SoC use GPIO pin 13 for
touchscreen interrupts. Add touchscreen pinctrl to a2015 common dtsi.
Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220610175332.104154-1-linmengbo0689@protonmail.com
The HDMI driver doesn't use the phy-names to identify the PHY. Different
Qualcomm platforms have used different names for the PHY. So, we are
deprecating phy-names propertty of the HDMI device and dropping them
from existing DTs.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220609122350.3157529-15-dmitry.baryshkov@linaro.org
Add proper compatibles to the IMEM device node:
1. syscon to allow accessing memory from other devices,
2. dedicated compatible as required for syscon and simple-mfd nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220607171848.535128-13-krzysztof.kozlowski@linaro.org
Add proper compatibles to the IMEM device node:
1. syscon to allow accessing memory from other devices,
2. dedicated compatible as required for syscon and simple-mfd nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220607171848.535128-12-krzysztof.kozlowski@linaro.org
Add proper compatibles to the IMEM device node:
1. syscon to allow accessing memory from other devices,
2. dedicated compatible as required for syscon and simple-mfd nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220607171848.535128-10-krzysztof.kozlowski@linaro.org
Add proper compatibles to the IMEM device node:
1. syscon to allow accessing memory from other devices,
2. dedicated compatible as required for syscon and simple-mfd nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220607171848.535128-9-krzysztof.kozlowski@linaro.org
According to Devicetree specification, the device nodes should be
generic, reflecting the function of the device. The typical name for
memory regions is "sram".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220607171848.535128-8-krzysztof.kozlowski@linaro.org
The soc node expects all the nodes to have unit addresses. The
qup-opp-table does not have that which causes warnings:
arch/arm64/boot/dts/qcom/sm8250.dtsi:916.32-933.5:
Warning (simple_bus_reg): /soc@0/qup-opp-table:
missing or empty reg/ranges property
Move the qup-opp-table out of soc node to fix these warnings
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[bjorn: Rebased ontop of Krzysztof's node name update]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220606065035.553533-4-vkoul@kernel.org
The soc node expects all the nodes to have unit addresses. The
qup-opp-tables do not have that which causes warnings:
arch/arm64/boot/dts/qcom/sm8350.dtsi:640.46-657.5:
Warning (simple_bus_reg): /soc@0/qup-100mhz-opp-table:
missing or empty reg/ranges property
arch/arm64/boot/dts/qcom/sm8350.dtsi:659.46-676.5:
Warning (simple_bus_reg): /soc@0/qup-120mhz-opp-table:
missing or empty reg/ranges property
Move the qup-opp-tables out of soc node to fix these warnings
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[bjorn: Rebased ontop of Krzysztof's node name update]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220606065035.553533-3-vkoul@kernel.org
clk-virt and mc-virt interconnect nodes were named interconnect@0 and
interconnect@1. That is incorrect as we don't have unit addresses 0/1
for these node.
This causes warning:
arch/arm64/boot/dts/qcom/sm8450.dtsi:255.27-259.4:
Warning (unit_address_vs_reg): /interconnect@0:
node has a unit name, but no reg or ranges property
arch/arm64/boot/dts/qcom/sm8450.dtsi:261.26-265.4:
Warning (unit_address_vs_reg): /interconnect@1:
node has a unit name, but no reg or ranges property
arch/arm64/boot/dts/qcom/sm8450.dtsi:255.27-259.4:
Warning (unique_unit_address_if_enabled): /interconnect@0:
duplicate unit-address (also used in node /soc@0)
Rename the nodes to interconnect-0 and interconnect-1 to fix the
warning.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220606065035.553533-2-vkoul@kernel.org
Add the device tree for Xiaomi Mi 5s Plus (natrium).
Signed-off-by: Alec Su <ae40515@yahoo.com.tw>
Reviewed-by: Yassine Oudjana <y.oudjana@protonmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220606024706.22861-3-ae40515@yahoo.com.tw
Current QUP peripheral labels like spi_0 and i2c_0 dont really tell what is
the exact QUP HW being used as there are actually 6 identical QUP HW blocks
for UART, SPI and I2C.
For example current i2c_0 label actually points to the QUP2 I2C HW.
This style of labeling does not follow what the rest of Qualcomm SoC-s use,
for example IPQ8074 which has the identical QUP blocks.
It also makes it really hard to add the missing QUP DT nodes as there are
multiple missing.
So utilize the same style as other Qualcomm SoC-s are using and update the
CP01 DTS as its the current sole user of them.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220604153003.55172-1-robimarko@gmail.com
The use of these constants was removed during merging, probably because
the patches adding those defines and the dts patches were merged through
different trees.
Re-add them to make it clear which clocks are getting used.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220603094710.64591-2-luca.weiss@fairphone.com
Make it easier to understand what the reg in those nodes is by using the
constants provided by qcom,q6dsp-lpass-ports.h.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220603094710.64591-1-luca.weiss@fairphone.com
The watchdog IRQ trigger type should be EDGE_RISING. So fix all remoteproc
nodes.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220530080842.37024-3-manivannan.sadhasivam@linaro.org
The smem-state properties for the pronto node were incorrectly labelled,
reading `qcom,state*` rather than `qcom,smem-state*`. Fix that, allowing
the stop state to be used.
Fixes: 88106096cb ("ARM: dts: msm8916: Add and enable wcnss node")
Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220526141740.15834-3-sireeshkodali1@gmail.com
This patch adds device tree support for the VL53L0X ToF sensor
found on all Yoshino devices.
Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220523175344.5845-6-markuss.broks@gmail.com
Add interconnects that are required to be proxy voted upon during modem
bootup on SC7280 SoCs.
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1652978825-5304-2-git-send-email-quic_sibis@quicinc.com
Specifying interrupts and interrupts-extended is not correct. Keep only
the extended ones, routed towards IPCC mailbox to fix warnings like:
sm8450-qrd.dtb: glink-edge: More than one condition true in oneOf schema:
{'$filename': 'Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml',
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220517070113.18023-13-krzysztof.kozlowski@linaro.org
Specifying interrupts and interrupts-extended is not correct. Keep only
the extended ones, routed towards IPCC mailbox to fix warnings like:
sm8350-sony-xperia-sagami-pdx214.dtb: glink-edge: More than one condition true in oneOf schema:
{'$filename': 'Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml',
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220517070113.18023-12-krzysztof.kozlowski@linaro.org
glink-edge node does not have children with unit addresses:
sdm630-sony-xperia-ganges-kirin.dtb: glink-edge: '#address-cells', '#size-cells' do not match any of the regexes: 'pinctrl-[0-9]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220517070113.18023-11-krzysztof.kozlowski@linaro.org
As Bjorn noted in [1], since the qmp phy driver doesn't
use the 'vdda-max-microamp' & 'vdda-pll-max-microamp' properties
currently, let's remove them from the dts files as well.
Otherwise, it leads to the following '$ make dtbs_check'
warning(s):
sm8350-microsoft-surface-duo2.dt.yaml: phy@1d87000:
'vdda-max-microamp', 'vdda-pll-max-microamp' do not match any of
the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+
If later on the driver support is added, we can add these properties
back to the dts files.
[1]. https://lore.kernel.org/linux-arm-msm/YmQhpsmiYJzR99LK@ripper/
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220516063155.1332683-5-bhupesh.sharma@linaro.org
Add USB power domains provided by GCC GDSCs.
Add the required #power-domain-cells to the GCC as well.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220515210048.483898-11-robimarko@gmail.com
Since the Qualcomm sdhci-msm device-tree binding has been converted
to yaml format, 'make dtbs_check' reports a number of issues with
ordering of 'reg-names' as various possible combinations
are possible for different qcom SoC dts files.
Fix the same by updating the offending 'dts' files.
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220514215424.1007718-6-bhupesh.sharma@linaro.org
Since the Qualcomm sdhci-msm device-tree binding has been converted
to yaml format, 'make dtbs_check' reports a number of issues with
ordering of 'clocks' & 'clock-names' for sdhci nodes:
arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dtb: sdhci@7824900:
clock-names:0: 'iface' was expected
arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dtb: sdhci@7824900:
clock-names:1: 'core' was expected
arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dtb: sdhci@7824900:
clock-names:2: 'xo' was expected
Fix the same by updating the offending 'dts' files.
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220514215424.1007718-5-bhupesh.sharma@linaro.org
Since the Qualcomm sdhci-msm device-tree binding has been converted
to yaml format, 'make dtbs_check' reports issues with
inconsistent 'interconnect-names' used for sdhci nodes.
Fix the same.
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220514215424.1007718-3-bhupesh.sharma@linaro.org
Since the Qualcomm sdhci-msm device-tree binding has been converted
to yaml format, 'make dtbs_check' reports issues with
inconsistent 'sdhci@' convention used for specifying the
sdhci nodes. The generic mmc bindings expect 'mmc@' format
instead.
Fix the same.
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
[bjorn: Moved non-arm64 changes to separate commit]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220514215424.1007718-2-bhupesh.sharma@linaro.org
The entire Sony Nile and Ganges lineup utilize the first three channels
(the triled channels) of the LPG block for an RGB (battery) status and
notification indicator.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
[bjorn: Dropped #address/#size-cells]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220511190718.764445-4-marijn.suijten@somainline.org
The Light Pulse Generator describes a hardware block responsible for
displaying colors and patterns on an RGB LED (usually used for [battery]
status and notifications), and drive PWM signals for general-purpose
(ie. backlight) LEDs. The availability and usage of the individual
channels differ per board and is hence left for individual platform DTs
to configure.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
[bjorn: Dropped #address/size-cells]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220511190718.764445-3-marijn.suijten@somainline.org
The current settings refer to "blsp_spi1" function which isn't defined.
For this reason an attempt to enable blsp1_spi1 interface results in
the probe failure below:
[ 3.492900] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table
[ 3.502460] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table
[ 3.517725] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table
[ 3.532998] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table
[ 3.548277] spi_qup: probe of 78b6000.spi failed with error -22
Fix this by making the functions used in qcs404.dtsi to match the contents
of drivers/pinctrl/qcom/pinctrl-qcs404.c.
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220611195713.131597-1-andrey.konovalov@linaro.org
Fix whitespace coding style: use single space instead of tabs or
multiple spaces around '=' sign in property assignment. No functional
changes (same DTB).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220526204248.832139-1-krzysztof.kozlowski@linaro.org
The NVMEM bindings expect that 'bits' property holds offset and size of
region within a byte, so it applies a constraint of <0, 7> for the
offset. Using 25 as HSTX trim offset is within 4-byte QFPROM word, but
outside of the byte:
sdm630-sony-xperia-nile-discovery.dtb: qfprom@780000: hstx-trim@240:bits:0:0: 25 is greater than the maximum of 7
sdm630-sony-xperia-nile-discovery.dtb: qfprom@780000: gpu-speed-bin@41a0:bits:0:0: 21 is greater than the maximum of 7
Align the offsets to match the bindings.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220505113802.243301-6-krzysztof.kozlowski@linaro.org
Use dedicated compatibles for QFPROM on MSM8916, MSM8996, MSM8998,
QCS404 and SDM630 which is expected by the bindings:
msm8996-mtp.dtb: qfprom@74000: compatible:0: 'qcom,qfprom' is not one of ['qcom,apq8064-qfprom', ...
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220505113802.243301-5-krzysztof.kozlowski@linaro.org
On PM660L, PMI8994 and PMI8998, the WLED has two address spaces and with
size-cells=0, they should be encoded as two separate items.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220505154702.422108-2-krzysztof.kozlowski@linaro.org
The AOSS QMP bindings expect all compatibles to be followed by fallback
"qcom,aoss-qmp" because all of these are actually compatible with each
other. This fixes dtbs_check warnings like:
sm8250-hdk.dtb: power-controller@c300000: compatible: ['qcom,sm8250-aoss-qmp'] is too short
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220504131923.214367-6-krzysztof.kozlowski@linaro.org
Kingoftown is a trogdor-based board. These dts files are unchanged copies
from the downstream Chrome OS 5.4 kernel.
Signed-off-by: Joseph S. Barrera III <joebar@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220625183538.v14.5.Ib62291487a664a65066d18a3e83c5428a6d2cc6c@changeid
Pazquel is a trogdor-based board. These dts files are unchanged copies
from the downstream Chrome OS 5.4 kernel.
Signed-off-by: Joseph S. Barrera III <joebar@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220625183538.v14.4.I41e2c2dc12961fe000ebc4d4ef6f0bc5da1259ea@changeid
Mrbland is a trogdor-based board. These dts files are copies from
the downstream Chrome OS 5.4 kernel, but with downstream bits removed.
Signed-off-by: Joseph S. Barrera III <joebar@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220625183538.v14.3.I71176ebf7e5aebddb211f00e805b32c08376d1be@changeid
Quackingstick is a trogdor-based board. These dts files are copies from
the downstream Chrome OS 5.4 kernel, but with downstream bits removed.
Signed-off-by: Joseph S. Barrera III <joebar@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220625183538.v14.2.I0977b1a08830d0caa8bfb1bdedb4ecceac709a7f@changeid
Wormdingler is a trogdor-based board, shipping to customers as the
Lenovo IdeaPad Chromebook Duet 3. These dts files are copies from
the downstream Chrome OS 5.4 kernel, but with the camera
(sc7180-trogdor-mipi-camera.dtsi) #include removed.
Signed-off-by: Joseph S. Barrera III <joebar@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220625183538.v14.1.Id769ddc5dbf570ccb511db96da59f97d08f75a9c@changeid
To ease matching configuration of sysfs attributes for particular
sensor, match label reported by iio 'label' attribute with the location
label generated by ChromeOS config tool.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220623223119.1858863-1-gwendal@chromium.org
Add an initial devicetree for the Lenovo Thinkpad X13s with support for
USB, backlight, keyboard, touchpad, touchscreen (to be verified), PMICs
and remoteprocs.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220622132617.24604-1-johan+linaro@kernel.org
Introduce the Qualcomm SA8540P automotive platform and the SA8295P ADP
development board.
The SA8540P and SC8280XP are fairly similar, so the SA8540P is built
ontop of the SC8280XP dtsi to reduce duplication. As more advanced
features are integrated this might be re-evaluated.
This initial contribution supports SMP, CPUFreq, cluster idle, UFS, RPMh
regulators, debug UART, PMICs, remoteprocs (NSPs crashes shortly after
booting) and USB.
The SA8295P ADP contains four PM8450 PMICs, which according to their
revid are compatible with PM8150. They are defined within the ADP for
now, to avoid creating additional .dtsi files for PM8150 with just
addresses changed - and to allow using the labels from the schematics.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220629041438.1352536-6-bjorn.andersson@linaro.org
Add basic support for the SC8280XP reference device, which allows it to
boot to a shell (using EFIFB) with functional storage (UFS), USB,
keyboard, touchpad, touchscreen, backlight and remoteprocs.
The PMICs are, per socinfo, reused from other platforms. But given that
the address of the PMICs doesn't match other cases and that it's
desirable to label things according to the schematics a new dtsi file is
created to represent the reference combination of PMICs.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220629041438.1352536-5-bjorn.andersson@linaro.org
contiguous ptes (missed in a recent clean-up).
-----BEGIN PGP SIGNATURE-----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=aTjQ
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"Restore TLB invalidation for the 'break-before-make' rule on
contiguous ptes (missed in a recent clean-up)"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: hugetlb: Restore TLB invalidation for BBM on contiguous ptes
Commit fb396bb459 ("arm64/hugetlb: Drop TLB flush from get_clear_flush()")
removed TLB invalidation from get_clear_flush() [now get_clear_contig()]
on the basis that the core TLB invalidation code is aware of hugetlb
mappings backed by contiguous page-table entries and will cover the
correct virtual address range.
However, this change also resulted in the TLB invalidation being removed
from the "break" step in the break-before-make (BBM) sequence used
internally by huge_ptep_set_{access_flags,wrprotect}(), therefore
making the BBM sequence unsafe irrespective of later invalidation.
Although the architecture is desperately unclear about how exactly
contiguous ptes should be updated in a live page-table, restore TLB
invalidation to our BBM sequence under the assumption that BBM is the
right thing to be doing in the first place.
Fixes: fb396bb459 ("arm64/hugetlb: Drop TLB flush from get_clear_flush()")
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20220629095349.25748-1-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add a specific override for ID_AA64SMFR0_EL1.FA64, which
disables the full A64 streaming SVE mode.
Note that no alias is provided for this, as this is already
covered by arm64.nosme, and is only added as a debugging
facility.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220630160500.1536744-10-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
In order to be able to completely disable SVE even if the HW
seems to support it (most likely because the FW is broken),
move the SVE setup into the EL2 finalisation block, and
use a new idreg override to deal with it.
Note that we also nuke id_aa64zfr0_el1 as a byproduct, and
that SME also gets disabled, due to the dependency between the
two features.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220630160500.1536744-9-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
In order to be able to completely disable SME even if the HW
seems to support it (most likely because the FW is broken),
move the SME setup into the EL2 finalisation block, and
use a new idreg override to deal with it.
Note that we also nuke id_aa64smfr0_el1 as a byproduct.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220630160500.1536744-8-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
In order to feal with early override of features that are not
classically encoded in a standard ID register with a 4 bit wide
field, add a primitive that takes a sysreg value as an input
(instead of the usual sysreg name) as well as a bit field
width (usually 4).
No functional change.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220630160500.1536744-7-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Currently, the override mechanism can only deal with 4bit fields,
which is the most common case. However, we now have a bunch of
ID registers that have more diverse field widths, such as
ID_AA64SMFR0_EL1, which has fields that are a single bit wide.
Add the support for variable width, and a macro that encodes
a feature width of 4 for all existing override.
No functional change.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220630160500.1536744-6-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Checking for a feature being supported from assembly code is
a bit tedious if we need to factor in the idreg override.
Since we already have such code written for forcing nVHE, move
the whole thing into a macro. This heavily relies on the override
structure being called foo_override for foo_el1.
No functional change.
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220630160500.1536744-5-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
For CPUs that have the unfortunate mis-feature to be stuck in
VHE mode, we perform a funny dance where we completely shortcut
the normal boot process to enable VHE and run the kernel at EL2,
and only then start booting the kernel.
Not only this is pretty ugly, but it means that the EL2 finalisation
occurs before we have processed the sysreg override.
Instead, start executing the kernel as if it was an EL1 guest and
rely on the normal EL2 finalisation to go back to EL2.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220630160500.1536744-4-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
As we're about to switch the way E2H-stuck CPUs boot, save
the boot CPU E2H state as a flag tied to the boot mode
that can then be checked by the idreg override code.
This allows us to replace the is_kernel_in_hyp_mode() check
with a simple comparison with this state, even when running
at EL1. Note that this flag isn't saved in __boot_cpu_mode,
and is only kept in a register in the assembly code.
Use with caution.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220630160500.1536744-3-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
as we are about to perform a lot more in 'mutate_to_vhe' than
we currently do, this function really becomes the point where
we finalise the basic EL2 configuration.
Reflect this into the code by renaming a bunch of things:
- HVC_VHE_RESTART -> HVC_FINALISE_EL2
- switch_to_vhe --> finalise_el2
- mutate_to_vhe -> __finalise_el2
No functional changes.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220630160500.1536744-2-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Joey reports that booting 52-bit VA capable builds on 52-bit VA capable
CPUs is broken since commit 0d9b1ffefa ("arm64: mm: make vabits_actual
a build time constant if possible"). This is due to the fact that the
primary CPU reads the vabits_actual variable before it has been
assigned.
The reason for deferring the assignment of vabits_actual was that we try
to perform as few stores to memory as we can with the MMU and caches
off, due to the cache coherency issues it creates.
Since __cpu_setup() [which is where the read of vabits_actual occurs] is
also called on the secondary boot path, we cannot just read the CPU ID
registers directly, given that the size of the VA space is decided by
the capabilities of the primary CPU. So let's read vabits_actual only on
the secondary boot path, and read the CPU ID registers directly on the
primary boot path, by making it a function parameter of __cpu_setup().
To ensure that all users of vabits_actual (including kasan_early_init())
observe the correct value, move the assignment of vabits_actual back
into asm code, but still defer it to after the MMU and caches have been
enabled.
Cc: Will Deacon <will@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Fixes: 0d9b1ffefa ("arm64: mm: make vabits_actual a build time constant if possible")
Reported-by: Joey Gouly <joey.gouly@arm.com>
Co-developed-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220701111045.2944309-1-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Andre Przywara