Now that the XTS template can wrap accelerated ECB modes, it can be
used to implement Serpent in XTS mode as well, which turns out to
be at least as fast, and sometimes even faster
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that the XTS template can wrap accelerated ECB modes, it can be
used to implement CAST6 in XTS mode as well, which turns out to
be at least as fast, and sometimes even faster
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that the XTS template can wrap accelerated ECB modes, it can be
used to implement Camellia in XTS mode as well, which turns out to
be at least as fast, and sometimes even faster.
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Here are some small char and misc driver fixes for 5.11-rc3.
the majority here are fixes for the habanalabs drivers, but also in here
are:
- crypto driver fix
- pvpanic driver fix
- updated font file
- interconnect driver fixes
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX/sJUw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym3/wCfYVaYBcHzr0CATzOXEbtpBlMpkkMAn1M/pOET
6RuyBJCjONwT8g4BzOq1
=jlAi
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char and misc driver fixes for 5.11-rc3.
The majority here are fixes for the habanalabs drivers, but also in
here are:
- crypto driver fix
- pvpanic driver fix
- updated font file
- interconnect driver fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (26 commits)
Fonts: font_ter16x32: Update font with new upstream Terminus release
misc: pvpanic: Check devm_ioport_map() for NULL
speakup: Add github repository URL and bug tracker
MAINTAINERS: Update Georgi's email address
crypto: asym_tpm: correct zero out potential secrets
habanalabs: Fix memleak in hl_device_reset
interconnect: imx8mq: Use icc_sync_state
interconnect: imx: Remove a useless test
interconnect: imx: Add a missing of_node_put after of_device_is_available
interconnect: qcom: fix rpmh link failures
habanalabs: fix order of status check
habanalabs: register to pci shutdown callback
habanalabs: add validation cs counter, fix misplaced counters
habanalabs/gaudi: retry loading TPC f/w on -EINTR
habanalabs: adjust pci controller init to new firmware
habanalabs: update comment in hl_boot_if.h
habanalabs/gaudi: enhance reset message
habanalabs: full FW hard reset support
habanalabs/gaudi: disable CGM at HW initialization
habanalabs: Revise comment to align with mirror list name
...
The AES-NI driver implements XTS via the glue helper, which consumes
a struct with sets of function pointers which are invoked on chunks
of input data of the appropriate size, as annotated in the struct.
Let's get rid of this indirection, so that we can perform direct calls
to the assembler helpers. Instead, let's adopt the arm64 strategy, i.e.,
provide a helper which can consume inputs of any size, provided that the
penultimate, full block is passed via the last call if ciphertext stealing
needs to be applied.
This also allows us to enable the XTS mode for i386.
Tested-by: Eric Biggers <ebiggers@google.com> # x86_64
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The file comment for blake2b_generic.c makes it sound like it's the
reference implementation of BLAKE2b with only minor changes. But it's
actually been changed a lot. Update the comment to make this clearer.
Reviewed-by: David Sterba <dsterba@suse.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Sync the BLAKE2b code with the BLAKE2s code as much as possible:
- Move a lot of code into new headers <crypto/blake2b.h> and
<crypto/internal/blake2b.h>, and adjust it to be like the
corresponding BLAKE2s code, i.e. like <crypto/blake2s.h> and
<crypto/internal/blake2s.h>.
- Rename constants, e.g. BLAKE2B_*_DIGEST_SIZE => BLAKE2B_*_HASH_SIZE.
- Use a macro BLAKE2B_ALG() to define the shash_alg structs.
- Export blake2b_compress_generic() for use as a fallback.
This makes it much easier to add optimized implementations of BLAKE2b,
as optimized implementations can use the helper functions
crypto_blake2b_{setkey,init,update,final}() and
blake2b_compress_generic(). The ARM implementation will use these.
But this change is also helpful because it eliminates unnecessary
differences between the BLAKE2b and BLAKE2s code, so that the same
improvements can easily be made to both. (The two algorithms are
basically identical, except for the word size and constants.) It also
makes it straightforward to add a library API for BLAKE2b in the future
if/when it's needed.
This change does make the BLAKE2b code slightly more complicated than it
needs to be, as it doesn't actually provide a library API yet. For
example, __blake2b_update() doesn't really need to exist yet; it could
just be inlined into crypto_blake2b_update(). But I believe this is
outweighed by the benefits of keeping the code in sync.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add helper functions for shash implementations of BLAKE2s to
include/crypto/internal/blake2s.h, taking advantage of
__blake2s_update() and __blake2s_final() that were added by the previous
patch to share more code between the library and shash implementations.
crypto_blake2s_setkey() and crypto_blake2s_init() are usable as
shash_alg::setkey and shash_alg::init directly, while
crypto_blake2s_update() and crypto_blake2s_final() take an extra
'blake2s_compress_t' function pointer parameter. This allows the
implementation of the compression function to be overridden, which is
the only part that optimized implementations really care about.
The new functions are inline functions (similar to those in sha1_base.h,
sha256_base.h, and sm3_base.h) because this avoids needing to add a new
module blake2s_helpers.ko, they aren't *too* long, and this avoids
indirect calls which are expensive these days. Note that they can't go
in blake2s_generic.ko, as that would require selecting CRYPTO_BLAKE2S
from CRYPTO_BLAKE2S_X86, which would cause a recursive dependency.
Finally, use these new helper functions in the x86 implementation of
BLAKE2s. (This part should be a separate patch, but unfortunately the
x86 implementation used the exact same function names like
"crypto_blake2s_update()", so it had to be updated at the same time.)
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
It doesn't make sense for the generic implementation of BLAKE2s to
include <crypto/internal/simd.h> and <linux/jump_label.h>, as these are
things that would only be useful in an architecture-specific
implementation. Remove these unnecessary includes.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The shash_alg structs for the four variants of BLAKE2s are identical
except for the algorithm name, driver name, and digest size. So, avoid
code duplication by using a macro to define these structs.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The cipher routines in the crypto API are mostly intended for templates
implementing skcipher modes generically in software, and shouldn't be
used outside of the crypto subsystem. So move the prototypes and all
related definitions to a new header file under include/crypto/internal.
Also, let's use the new module namespace feature to move the symbol
exports into a new namespace CRYPTO_INTERNAL.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The signed long type used for printing the number of bytes processed in
tcrypt benchmarks limits the range to -/+ 2 GiB, which is not sufficient
to cover the performance of common accelerated ciphers such as AES-NI
when benchmarked with sec=1. So switch to u64 instead.
While at it, fix up a missing printk->pr_cont conversion in the AEAD
benchmark.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pavel reports that commit 17858b140b ("crypto: ecdh - avoid unaligned
accesses in ecdh_set_secret()") fixes one problem but introduces another:
the unconditional memcpy() introduced by that commit may overflow the
target buffer if the source data is invalid, which could be the result of
intentional tampering.
So check params.key_size explicitly against the size of the target buffer
before validating the key further.
Fixes: 17858b140b ("crypto: ecdh - avoid unaligned accesses in ecdh_set_secret()")
Reported-by: Pavel Machek <pavel@denx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The function derive_pub_key() should be calling memzero_explicit()
instead of memset() in case the complier decides to optimize away the
call to memset() because it "knows" no one is going to touch the memory
anymore.
Cc: stable <stable@vger.kernel.org>
Reported-by: Ilil Blum Shem-Tov <ilil.blum.shem-tov@intel.com>
Tested-by: Ilil Blum Shem-Tov <ilil.blum.shem-tov@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/X8ns4AfwjKudpyfe@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Geert reports that builds where CONFIG_CRYPTO_AEGIS128_SIMD is not set
may still emit references to crypto_aegis128_update_simd(), which
cannot be satisfied and therefore break the build. These references
only exist in functions that can be optimized away, but apparently,
the compiler is not always able to prove this.
So add some explicit checks for CONFIG_CRYPTO_AEGIS128_SIMD to help the
compiler figure this out.
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
ecdh_set_secret() casts a void* pointer to a const u64* in order to
feed it into ecc_is_key_valid(). This is not generally permitted by
the C standard, and leads to actual misalignment faults on ARMv6
cores. In some cases, these are fixed up in software, but this still
leads to performance hits that are entirely avoidable.
So let's copy the key into the ctx buffer first, which we will do
anyway in the common case, and which guarantees correct alignment.
Cc: <stable@vger.kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
WireGuard and IPsec both typically operate on input blocks that are
~1420 bytes in size, given the default Ethernet MTU of 1500 bytes and
the overhead of the VPN metadata.
Many aead and sckipher implementations are optimized for power-of-2
block sizes, and whether they perform well when operating on 1420
byte blocks cannot be easily extrapolated from the performance on
power-of-2 block size. So let's add 1420 bytes explicitly, and round
it up to the next blocksize multiple of the algo in question if it
does not support 1420 byte blocks.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When working on crypto algorithms, being able to run tcrypt quickly
without booting an entire Linux installation can be very useful. For
instance, QEMU/kvm can be used to boot a kernel from the command line,
and having tcrypt.ko builtin would allow tcrypt to be executed to run
benchmarks, or to run tests for algorithms that need to be instantiated
from templates, without the need to make it past the point where the
rootfs is mounted.
So let's relax the requirement that tcrypt can only be built as a module
when CONFIG_EXPERT is enabled.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit c4741b2305 ("crypto: run initcalls for generic implementations
earlier") converted tcrypt.ko's module_init() to subsys_initcall(), but
this was unintentional: tcrypt.ko currently cannot be built into the core
kernel, and so the subsys_initcall() gets converted into module_init()
under the hood. Given that tcrypt.ko does not implement a generic version
of a crypto algorithm that has to be available early during boot, there
is no point in running the tcrypt init code earlier than implied by
module_init().
However, for crypto development purposes, we will lift the restriction
that tcrypt.ko must be built as a module, and when builtin, it makes sense
for tcrypt.ko (which does its work inside the module init function) to run
as late as possible. So let's switch to late_initcall() instead.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Wiring the SIMD code into the generic driver has the unfortunate side
effect that the tcrypt testing code cannot distinguish them, and will
therefore not use the latter to fuzz test the former, as it does for
other algorithms.
So let's refactor the code a bit so we can register two implementations:
aegis128-generic and aegis128-simd.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Ondrej Mosnacek <omosnacek@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of calculating the tag and returning it to the caller on
decryption, use a SIMD compare and min across vector to perform
the comparison. This is slightly more efficient, and removes the
need on the caller's part to wipe the tag from memory if the
decryption failed.
While at it, switch to unsigned int when passing cryptlen and
assoclen - we don't support input sizes where it matters anyway.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Ondrej Mosnacek <omosnacek@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Avoid copying the tail block via a stack buffer if the total size
exceeds a single AEGIS block. In this case, we can use overlapping
loads and stores and NEON permutation instructions instead, which
leads to a modest performance improvement on some cores (< 5%),
and is slightly cleaner. Note that we still need to use a stack
buffer if the entire input is smaller than 16 bytes, given that
we cannot use 16 byte NEON loads and stores safely in this case.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Ondrej Mosnacek <omosnacek@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The AEGIS spec mentions explicitly that the security guarantees hold
only if the resulting plaintext and tag of a failed decryption are
withheld. So ensure that we abide by this.
While at it, drop the unused struct aead_request *req parameter from
crypto_aegis128_process_crypt().
Reviewed-by: Ondrej Mosnacek <omosnacek@gmail.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently <crypto/sha.h> contains declarations for both SHA-1 and SHA-2,
and <crypto/sha3.h> contains declarations for SHA-3.
This organization is inconsistent, but more importantly SHA-1 is no
longer considered to be cryptographically secure. So to the extent
possible, SHA-1 shouldn't be grouped together with any of the other SHA
versions, and usage of it should be phased out.
Therefore, split <crypto/sha.h> into two headers <crypto/sha1.h> and
<crypto/sha2.h>, and make everyone explicitly specify whether they want
the declarations for SHA-1, SHA-2, or both.
This avoids making the SHA-1 declarations visible to files that don't
want anything to do with SHA-1. It also prepares for potentially moving
sha1.h into a new insecure/ or dangerous/ directory.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The extra tests in the manager actually require the manager to be
selected too. Otherwise the linker gives errors like:
ld: arch/x86/crypto/chacha_glue.o: in function `chacha_simd_stream_xor':
chacha_glue.c:(.text+0x422): undefined reference to `crypto_simd_disabled_for_test'
Fixes: 2343d1529a ("crypto: Kconfig - allow tests to be disabled when manager is disabled")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit 3f69cc6076 ("crypto: af_alg - Allow arbitrarily long algorithm
names") made the kernel start accepting arbitrarily long algorithm names
in sockaddr_alg. However, the actual length of the salg_name field
stayed at the original 64 bytes.
This is broken because the kernel can access indices >= 64 in salg_name,
which is undefined behavior -- even though the memory that is accessed
is still located within the sockaddr structure. It would only be
defined behavior if the array were properly marked as arbitrary-length
(either by making it a flexible array, which is the recommended way
these days, or by making it an array of length 0 or 1).
We can't simply change salg_name into a flexible array, since that would
break source compatibility with userspace programs that embed
sockaddr_alg into another struct, or (more commonly) declare a
sockaddr_alg like 'struct sockaddr_alg sa = { .salg_name = "foo" };'.
One solution would be to change salg_name into a flexible array only
when '#ifdef __KERNEL__'. However, that would keep userspace without an
easy way to actually use the longer algorithm names.
Instead, add a new structure 'sockaddr_alg_new' that has the flexible
array field, and expose it to both userspace and the kernel.
Make the kernel use it correctly in alg_bind().
This addresses the syzbot report
"UBSAN: array-index-out-of-bounds in alg_bind"
(https://syzkaller.appspot.com/bug?extid=92ead4eb8e26a26d465e).
Reported-by: syzbot+92ead4eb8e26a26d465e@syzkaller.appspotmail.com
Fixes: 3f69cc6076 ("crypto: af_alg - Allow arbitrarily long algorithm names")
Cc: <stable@vger.kernel.org> # v4.12+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, by default crypto self-test failures only result in a
pr_warn() message and an "unknown" status in /proc/crypto. Both of
these are easy to miss. There is also an option to panic the kernel
when a test fails, but that can't be the default behavior.
A crypto self-test failure always indicates a kernel bug, however, and
there's already a standard way to report (recoverable) kernel bugs --
the WARN() family of macros. WARNs are noisier and harder to miss, and
existing test systems already know to look for them in dmesg or via
/proc/sys/kernel/tainted.
Therefore, call WARN() when an algorithm fails its self-tests.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When alg_test() is called from tcrypt.ko rather than from the algorithm
registration code, "driver" is actually the algorithm name, not the
driver name. So it shouldn't be used in places where a driver name is
wanted, e.g. when reporting a test failure or when checking whether the
driver is the generic driver or not.
Fix this for the skcipher algorithm tests by getting the driver name
from the crypto_skcipher that actually got allocated.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When alg_test() is called from tcrypt.ko rather than from the algorithm
registration code, "driver" is actually the algorithm name, not the
driver name. So it shouldn't be used in places where a driver name is
wanted, e.g. when reporting a test failure or when checking whether the
driver is the generic driver or not.
Fix this for the AEAD algorithm tests by getting the driver name from
the crypto_aead that actually got allocated.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When alg_test() is called from tcrypt.ko rather than from the algorithm
registration code, "driver" is actually the algorithm name, not the
driver name. So it shouldn't be used in places where a driver name is
wanted, e.g. when reporting a test failure or when checking whether the
driver is the generic driver or not.
Fix this for the hash algorithm tests by getting the driver name from
the crypto_ahash or crypto_shash that actually got allocated.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This is an algorithm optimization. The reset operation when
setting the public key is repeated and redundant, so remove it.
At the same time, `sm2_ecc_os2ec()` is optimized to make the
function more simpler and more in line with the Linux code style.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-----BEGIN PGP SIGNATURE-----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=xE9E
-----END PGP SIGNATURE-----
Merge tag 'drivers-5.10-2020-10-12' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
"Here are the driver updates for 5.10.
A few SCSI updates in here too, in coordination with Martin as they
depend on core block changes for the shared tag bitmap.
This contains:
- NVMe pull requests via Christoph:
- fix keep alive timer modification (Amit Engel)
- order the PCI ID list more sensibly (Andy Shevchenko)
- cleanup the open by controller helper (Chaitanya Kulkarni)
- use an xarray for the CSE log lookup (Chaitanya Kulkarni)
- support ZNS in nvmet passthrough mode (Chaitanya Kulkarni)
- fix nvme_ns_report_zones (Christoph Hellwig)
- add a sanity check to nvmet-fc (James Smart)
- fix interrupt allocation when too many polled queues are
specified (Jeffle Xu)
- small nvmet-tcp optimization (Mark Wunderlich)
- fix a controller refcount leak on init failure (Chaitanya
Kulkarni)
- misc cleanups (Chaitanya Kulkarni)
- major refactoring of the scanning code (Christoph Hellwig)
- MD updates via Song:
- Bug fixes in bitmap code, from Zhao Heming
- Fix a work queue check, from Guoqing Jiang
- Fix raid5 oops with reshape, from Song Liu
- Clean up unused code, from Jason Yan
- Discard improvements, from Xiao Ni
- raid5/6 page offset support, from Yufen Yu
- Shared tag bitmap for SCSI/hisi_sas/null_blk (John, Kashyap,
Hannes)
- null_blk open/active zone limit support (Niklas)
- Set of bcache updates (Coly, Dongsheng, Qinglang)"
* tag 'drivers-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (78 commits)
md/raid5: fix oops during stripe resizing
md/bitmap: fix memory leak of temporary bitmap
md: fix the checking of wrong work queue
md/bitmap: md_bitmap_get_counter returns wrong blocks
md/bitmap: md_bitmap_read_sb uses wrong bitmap blocks
md/raid0: remove unused function is_io_in_chunk_boundary()
nvme-core: remove extra condition for vwc
nvme-core: remove extra variable
nvme: remove nvme_identify_ns_list
nvme: refactor nvme_validate_ns
nvme: move nvme_validate_ns
nvme: query namespace identifiers before adding the namespace
nvme: revalidate zone bitmaps in nvme_update_ns_info
nvme: remove nvme_update_formats
nvme: update the known admin effects
nvme: set the queue limits in nvme_update_ns_info
nvme: remove the 0 lba_shift check in nvme_update_ns_info
nvme: clean up the check for too large logic block sizes
nvme: freeze the queue over ->lba_shift updates
nvme: factor out a nvme_configure_metadata helper
...
Pull crypto updates from Herbert Xu:
"API:
- Allow DRBG testing through user-space af_alg
- Add tcrypt speed testing support for keyed hashes
- Add type-safe init/exit hooks for ahash
Algorithms:
- Mark arc4 as obsolete and pending for future removal
- Mark anubis, khazad, sead and tea as obsolete
- Improve boot-time xor benchmark
- Add OSCCA SM2 asymmetric cipher algorithm and use it for integrity
Drivers:
- Fixes and enhancement for XTS in caam
- Add support for XIP8001B hwrng in xiphera-trng
- Add RNG and hash support in sun8i-ce/sun8i-ss
- Allow imx-rngc to be used by kernel entropy pool
- Use crypto engine in omap-sham
- Add support for Ingenic X1830 with ingenic"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (205 commits)
X.509: Fix modular build of public_key_sm2
crypto: xor - Remove unused variable count in do_xor_speed
X.509: fix error return value on the failed path
crypto: bcm - Verify GCM/CCM key length in setkey
crypto: qat - drop input parameter from adf_enable_aer()
crypto: qat - fix function parameters descriptions
crypto: atmel-tdes - use semicolons rather than commas to separate statements
crypto: drivers - use semicolons rather than commas to separate statements
hwrng: mxc-rnga - use semicolons rather than commas to separate statements
hwrng: iproc-rng200 - use semicolons rather than commas to separate statements
hwrng: stm32 - use semicolons rather than commas to separate statements
crypto: xor - use ktime for template benchmarking
crypto: xor - defer load time benchmark to a later time
crypto: hisilicon/zip - fix the uninitalized 'curr_qm_qp_num'
crypto: hisilicon/zip - fix the return value when device is busy
crypto: hisilicon/zip - fix zero length input in GZIP decompress
crypto: hisilicon/zip - fix the uncleared debug registers
lib/mpi: Fix unused variable warnings
crypto: x86/poly1305 - Remove assignments with no effect
hwrng: npcm - modify readl to readb
...
The sm2 code was split out of public_key.c in a way that breaks
modular builds. This patch moves the code back into the same file
as the original motivation was to minimise ifdefs and that has
nothing to do with splitting the code out.
Fixes: 2155256396 ("X.509: support OSCCA SM2-with-SM3...")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Clang warns:
crypto/xor.c:101:4: warning: variable 'count' is uninitialized when used
here [-Wuninitialized]
count++;
^~~~~
crypto/xor.c:86:17: note: initialize the variable 'count' to silence
this warning
int i, j, count;
^
= 0
1 warning generated.
After the refactoring to use ktime that happened in this function, count
is only assigned, never read. Just remove the variable to get rid of the
warning.
Fixes: c055e3eae0 ("crypto: xor - use ktime for template benchmarking")
Link: https://github.com/ClangBuiltLinux/linux/issues/1171
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When memory allocation fails, an appropriate return value
should be set.
Fixes: 2155256396 ("X.509: support OSCCA SM2-with-SM3 certificate verification")
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, we use the jiffies counter as a time source, by staring at
it until a HZ period elapses, and then staring at it again and perform
as many XOR operations as we can at the same time until another HZ
period elapses, so that we can calculate the throughput. This takes
longer than necessary, and depends on HZ, which is undesirable, since
HZ is system dependent.
Let's use the ktime interface instead, and use it to time a fixed
number of XOR operations, which can be done much faster, and makes
the time spent depend on the performance level of the system itself,
which is much more reasonable. To ensure that we have the resolution
we need even on systems with 32 kHz time sources, while not spending too
much time in the benchmark on a slow CPU, let's switch to 3 attempts of
800 repetitions each: that way, we will only misidentify algorithms that
perform within 10% of each other as the fastest if they are faster than
10 GB/s to begin with, which is not expected to occur on systems with
such coarse clocks.
On ThunderX2, I get the following results:
Before:
[72625.956765] xor: measuring software checksum speed
[72625.993104] 8regs : 10169.000 MB/sec
[72626.033099] 32regs : 12050.000 MB/sec
[72626.073095] arm64_neon: 11100.000 MB/sec
[72626.073097] xor: using function: 32regs (12050.000 MB/sec)
After:
[72599.650216] xor: measuring software checksum speed
[72599.651188] 8regs : 10491 MB/sec
[72599.652006] 32regs : 12345 MB/sec
[72599.652871] arm64_neon : 11402 MB/sec
[72599.652873] xor: using function: 32regs (12345 MB/sec)
Link: https://lore.kernel.org/linux-crypto/20200923182230.22715-3-ardb@kernel.org/
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, the XOR module performs its boot time benchmark at core
initcall time when it is built-in, to ensure that the RAID code can
make use of it when it is built-in as well.
Let's defer this to a later stage during the boot, to avoid impacting
the overall boot time of the system. Instead, just pick an arbitrary
implementation from the list, and use that as the preliminary default.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The digital certificate format based on SM2 crypto algorithm as
specified in GM/T 0015-2012. It was published by State Encryption
Management Bureau, China.
The method of generating Other User Information is defined as
ZA=H256(ENTLA || IDA || a || b || xG || yG || xA || yA), it also
specified in https://tools.ietf.org/html/draft-shen-sm2-ecdsa-02.
The x509 certificate supports SM2-with-SM3 type certificate
verification. Because certificate verification requires ZA
in addition to tbs data, ZA also depends on elliptic curve
parameters and public key data, so you need to access tbs in sig
and calculate ZA. Finally calculate the digest of the
signature and complete the verification work. The calculation
process of ZA is declared in specifications GM/T 0009-2012
and GM/T 0003.2-2012.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Tested-by: Xufeng Zhang <yunbo.xufeng@linux.alibaba.com>
Reviewed-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The digital certificate format based on SM2 crypto algorithm as
specified in GM/T 0015-2012. It was published by State Encryption
Management Bureau, China.
This patch adds the OID object identifier defined by OSCCA. The
x509 certificate supports SM2-with-SM3 type certificate parsing.
It uses the standard elliptic curve public key, and the sm2
algorithm signs the hash generated by sm3.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Tested-by: Xufeng Zhang <yunbo.xufeng@linux.alibaba.com>
Reviewed-by: Vitaly Chikunov <vt@altlinux.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add testmgr test vectors for SM2 algorithm. These vectors come
from `openssl pkeyutl -sign` and libgcrypt.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Tested-by: Xufeng Zhang <yunbo.xufeng@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When the 'key' allocation fails, the 'req' will not be released,
which will cause memory leakage on this path. This patch adds a
'free_req' tag used to solve this problem, and two new err values
are added to reflect the real reason of the error.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some asymmetric algorithms will get different ciphertext after
each encryption, such as SM2, and let testmgr support the testing
of such algorithms.
In struct akcipher_testvec, set c and c_size to be empty, skip
the comparison of the ciphertext, and compare the decrypted
plaintext with m to achieve the test purpose.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Tested-by: Xufeng Zhang <yunbo.xufeng@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This new module implement the SM2 public key algorithm. It was
published by State Encryption Management Bureau, China.
List of specifications for SM2 elliptic curve public key cryptography:
* GM/T 0003.1-2012
* GM/T 0003.2-2012
* GM/T 0003.3-2012
* GM/T 0003.4-2012
* GM/T 0003.5-2012
IETF: https://tools.ietf.org/html/draft-shen-sm2-ecdsa-02
oscca: http://www.oscca.gov.cn/sca/xxgk/2010-12/17/content_1002386.shtml
scctc: http://www.gmbz.org.cn/main/bzlb.html
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Tested-by: Xufeng Zhang <yunbo.xufeng@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Both crypto_sm3_update and crypto_sm3_finup have been
exported, exporting crypto_sm3_final, to avoid having to
use crypto_sm3_finup(desc, NULL, 0, dgst) to calculate
the hash in some cases.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Tested-by: Xufeng Zhang <yunbo.xufeng@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Extend the user-space RNG interface:
1. Add entropy input via ALG_SET_DRBG_ENTROPY setsockopt option;
2. Add additional data input via sendmsg syscall.
This allows DRBG to be tested with test vectors, for example for the
purpose of CAVP testing, which otherwise isn't possible.
To prevent erroneous use of entropy input, it is hidden under
CRYPTO_USER_API_RNG_CAVP config option and requires CAP_SYS_ADMIN to
succeed.
Signed-off-by: Elena Petrova <lenaptr@google.com>
Acked-by: Stephan Müller <smueller@chronox.de>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For now, asynchronous raid6 recovery calculate functions are require
common offset for pages. But, we expect them to support different page
offset after introducing stripe shared page. Do that by simplily adding
page offset where each page address are referred. Then, replace the
old interface with the new ones in raid6 and raid6test.
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
For now, syndrome compute functions require common offset in the pages
array. However, we expect them to support different offset when try to
use shared page in the following. Simplily covert them by adding page
offset where each page address are referred.
Since the only caller of async_gen_syndrome() and async_syndrome_val()
are in raid6, we don't want to reserve the old interface but modify the
interface directly. After that, replacing old interfaces with new ones
for raid6 and raid6test.
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
raid5 will call async_xor() and async_xor_val() to compute xor.
For now, both of them require the common src/dst page offset. But,
we want them to support different src/dst page offset for following
shared page.
Here, adding two new function async_xor_offs() and async_xor_val_offs()
respectively for async_xor() and async_xor_val().
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
We have a few interesting pieces in our cipher museum, which are never
used internally, and were only ever provided as generic C implementations.
Unfortunately, we cannot simply remove this code, as we cannot be sure
that it is not being used via the AF_ALG socket API, however unlikely.
So let's mark the Anubis, Khazad, SEED and TEA algorithms as obsolete,
which means they can only be enabled in the build if the socket API is
enabled in the first place.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that crypto/cbc.h is only used by the generic cbc template,
we can merge it back into the CBC code.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Cryptographic algorithms may have a lifespan that is significantly
shorter than Linux's, and so we need to start phasing out algorithms
that are known to be broken, and are no longer fit for general use.
RC4 (or arc4) is a good example here: there are a few areas where its
use is still somewhat acceptable, e.g., for interoperability with legacy
wifi hardware that can only use WEP or TKIP data encryption, but that
should not imply that, for instance, use of RC4 based EAP-TLS by the WPA
supplicant for negotiating TKIP keys is equally acceptable, or that RC4
should remain available as a general purpose cryptographic transform for
all in-kernel and user space clients.
Now that all in-kernel users that need to retain support have moved to
the arc4 library interface, and the known users of ecb(arc4) via the
socket API (iwd [0] and libell [1][2]) have been updated to switch to a
local implementation, we can take the next step, and mark the ecb(arc4)
skcipher as obsolete, and only provide it if the socket API is enabled in
the first place, as well as provide the option to disable all algorithms
that have been marked as obsolete.
[0] https://git.kernel.org/pub/scm/network/wireless/iwd.git/commit/?id=1db8a85a60c64523
[1] https://git.kernel.org/pub/scm/libs/ell/ell.git/commit/?id=53482ce421b727c2
[2] https://git.kernel.org/pub/scm/libs/ell/ell.git/commit/?id=7f6a137809d42f6b
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull crypto fixes from Herbert Xu:
- fix regression in af_alg that affects iwd
- restore polling delay in qat
- fix double free in ingenic on error path
- fix potential build failure in sa2ul due to missing Kconfig dependency
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: af_alg - Work around empty control messages without MSG_MORE
crypto: sa2ul - add Kconfig selects to fix build error
crypto: ingenic - Drop kfree for memory allocated with devm_kzalloc
crypto: qat - add delay before polling mailbox
This patch adds the type-safe init_tfm/exit_tfm functions to the
ahash interface. This is meant to replace the unsafe cra_init and
cra_exit interface.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The iwd daemon uses libell which sets up the skcipher operation with
two separate control messages. As the first control message is sent
without MSG_MORE, it is interpreted as an empty request.
While libell should be fixed to use MSG_MORE where appropriate, this
patch works around the bug in the kernel so that existing binaries
continue to work.
We will print a warning however.
A separate issue is that the new kernel code no longer allows the
control message to be sent twice within the same request. This
restriction is obviously incompatible with what iwd was doing (first
setting an IV and then sending the real control message). This
patch changes the kernel so that this is explicitly allowed.
Reported-by: Caleb Jorden <caljorden@hotmail.com>
Fixes: f3c802a1f3 ("crypto: algif_aead - Only wake up when...")
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Revert "crypto: hash - Add real ahash walk interface"
This reverts commit 75ecb231ff.
The callers of the functions in this commit were removed in ab8085c130
Remove these unused calls.
Fixes: ab8085c130 ("crypto: x86 - remove SHA multibuffer routines and mcryptd")
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently if you speed test a hash that requires a key you'll get an
error because tcrypt does not set a key by default. This patch
allows a key to be set using the new module parameter klen.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The async path cannot use MAY_BACKLOG because it is not meant to
block, which is what MAY_BACKLOG does. On the other hand, both
the sync and async paths can make use of MAY_SLEEP.
Fixes: 83094e5e9e ("crypto: af_alg - add async support to...")
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
I removed the MAY_BACKLOG flag on the aio path a while ago but
the error check still incorrectly interpreted EBUSY as success.
This may cause the submitter to wait for a request that will never
complete.
Fixes: dad4199706 ("crypto: algif_skcipher - Do not set...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Drop the doubled word "failed" in pr_err() messages.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Drop the doubled word "a".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Change the doubled word "at" to "at a".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Drop the doubled word "the".
Change "at at" to "at a".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Drop the doubled word "is".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The header file algapi.h includes skbuff.h unnecessarily since
all we need is a forward declaration for struct sk_buff. This
patch removes that inclusion.
Unfortunately skbuff.h pulls in a lot of things and drivers over
the years have come to rely on it so this patch adds a lot of
missing inclusions that result from this.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch moves crypto_yield into internal.h as it's only used
by internal code such as skcipher. It also adds a missing inclusion
of sched.h which is required for cond_resched.
The header files in internal.h have been cleaned up to remove some
ancient junk and add some more specific inclusions.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull crypto fix from Herbert Xu:
"This fixes a regression in af_alg"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: algif_aead - fix uninitialized ctx->init
In skcipher_accept_parent_nokey() the whole af_alg_ctx structure is
cleared by memset() after allocation, so add such memset() also to
aead_accept_parent_nokey() so that the new "init" field is also
initialized to zero. Without that the initial ctx->init checks might
randomly return true and cause errors.
While there, also remove the redundant zero assignments in both
functions.
Found via libkcapi testsuite.
Cc: Stephan Mueller <smueller@chronox.de>
Fixes: f3c802a1f3 ("crypto: algif_aead - Only wake up when ctx->more is zero")
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As said by Linus:
A symmetric naming is only helpful if it implies symmetries in use.
Otherwise it's actively misleading.
In "kzalloc()", the z is meaningful and an important part of what the
caller wants.
In "kzfree()", the z is actively detrimental, because maybe in the
future we really _might_ want to use that "memfill(0xdeadbeef)" or
something. The "zero" part of the interface isn't even _relevant_.
The main reason that kzfree() exists is to clear sensitive information
that should not be leaked to other future users of the same memory
objects.
Rename kzfree() to kfree_sensitive() to follow the example of the recently
added kvfree_sensitive() and make the intention of the API more explicit.
In addition, memzero_explicit() is used to clear the memory to make sure
that it won't get optimized away by the compiler.
The renaming is done by using the command sequence:
git grep -w --name-only kzfree |\
xargs sed -i 's/kzfree/kfree_sensitive/'
followed by some editing of the kfree_sensitive() kerneldoc and adding
a kzfree backward compatibility macro in slab.h.
[akpm@linux-foundation.org: fs/crypto/inline_crypt.c needs linux/slab.h]
[akpm@linux-foundation.org: fix fs/crypto/inline_crypt.c some more]
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Joe Perches <joe@perches.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: "Jason A . Donenfeld" <Jason@zx2c4.com>
Link: http://lkml.kernel.org/r/20200616154311.12314-3-longman@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
static priority level knowledge from non-scheduler code.
The three APIs for non-scheduler code to set SCHED_FIFO are:
- sched_set_fifo()
- sched_set_fifo_low()
- sched_set_normal()
These are two FIFO priority levels: default (high), and a 'low' priority level,
plus sched_set_normal() to set the policy back to non-SCHED_FIFO.
Since the changes affect a lot of non-scheduler code, we kept this in a separate
tree.
When merging to the latest upstream tree there's a conflict in drivers/spi/spi.c,
which can be resolved via:
sched_set_fifo(ctlr->kworker_task);
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=/7JH
-----END PGP SIGNATURE-----
Merge tag 'sched-fifo-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull sched/fifo updates from Ingo Molnar:
"This adds the sched_set_fifo*() encapsulation APIs to remove static
priority level knowledge from non-scheduler code.
The three APIs for non-scheduler code to set SCHED_FIFO are:
- sched_set_fifo()
- sched_set_fifo_low()
- sched_set_normal()
These are two FIFO priority levels: default (high), and a 'low'
priority level, plus sched_set_normal() to set the policy back to
non-SCHED_FIFO.
Since the changes affect a lot of non-scheduler code, we kept this in
a separate tree"
* tag 'sched-fifo-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
sched,tracing: Convert to sched_set_fifo()
sched: Remove sched_set_*() return value
sched: Remove sched_setscheduler*() EXPORTs
sched,psi: Convert to sched_set_fifo_low()
sched,rcutorture: Convert to sched_set_fifo_low()
sched,rcuperf: Convert to sched_set_fifo_low()
sched,locktorture: Convert to sched_set_fifo()
sched,irq: Convert to sched_set_fifo()
sched,watchdog: Convert to sched_set_fifo()
sched,serial: Convert to sched_set_fifo()
sched,powerclamp: Convert to sched_set_fifo()
sched,ion: Convert to sched_set_normal()
sched,powercap: Convert to sched_set_fifo*()
sched,spi: Convert to sched_set_fifo*()
sched,mmc: Convert to sched_set_fifo*()
sched,ivtv: Convert to sched_set_fifo*()
sched,drm/scheduler: Convert to sched_set_fifo*()
sched,msm: Convert to sched_set_fifo*()
sched,psci: Convert to sched_set_fifo*()
sched,drbd: Convert to sched_set_fifo*()
...
Pull networking updates from David Miller:
1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan.
2) Support UDP segmentation in code TSO code, from Eric Dumazet.
3) Allow flashing different flash images in cxgb4 driver, from Vishal
Kulkarni.
4) Add drop frames counter and flow status to tc flower offloading,
from Po Liu.
5) Support n-tuple filters in cxgb4, from Vishal Kulkarni.
6) Various new indirect call avoidance, from Eric Dumazet and Brian
Vazquez.
7) Fix BPF verifier failures on 32-bit pointer arithmetic, from
Yonghong Song.
8) Support querying and setting hardware address of a port function via
devlink, use this in mlx5, from Parav Pandit.
9) Support hw ipsec offload on bonding slaves, from Jarod Wilson.
10) Switch qca8k driver over to phylink, from Jonathan McDowell.
11) In bpftool, show list of processes holding BPF FD references to
maps, programs, links, and btf objects. From Andrii Nakryiko.
12) Several conversions over to generic power management, from Vaibhav
Gupta.
13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry
Yakunin.
14) Various https url conversions, from Alexander A. Klimov.
15) Timestamping and PHC support for mscc PHY driver, from Antoine
Tenart.
16) Support bpf iterating over tcp and udp sockets, from Yonghong Song.
17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov.
18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan.
19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several
drivers. From Luc Van Oostenryck.
20) XDP support for xen-netfront, from Denis Kirjanov.
21) Support receive buffer autotuning in MPTCP, from Florian Westphal.
22) Support EF100 chip in sfc driver, from Edward Cree.
23) Add XDP support to mvpp2 driver, from Matteo Croce.
24) Support MPTCP in sock_diag, from Paolo Abeni.
25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic
infrastructure, from Jakub Kicinski.
26) Several pci_ --> dma_ API conversions, from Christophe JAILLET.
27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel.
28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki.
29) Refactor a lot of networking socket option handling code in order to
avoid set_fs() calls, from Christoph Hellwig.
30) Add rfc4884 support to icmp code, from Willem de Bruijn.
31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei.
32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin.
33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin.
34) Support TCP syncookies in MPTCP, from Flowian Westphal.
35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano
Brivio.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits)
net: thunderx: initialize VF's mailbox mutex before first usage
usb: hso: remove bogus check for EINPROGRESS
usb: hso: no complaint about kmalloc failure
hso: fix bailout in error case of probe
ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM
selftests/net: relax cpu affinity requirement in msg_zerocopy test
mptcp: be careful on subflow creation
selftests: rtnetlink: make kci_test_encap() return sub-test result
selftests: rtnetlink: correct the final return value for the test
net: dsa: sja1105: use detected device id instead of DT one on mismatch
tipc: set ub->ifindex for local ipv6 address
ipv6: add ipv6_dev_find()
net: openvswitch: silence suspicious RCU usage warning
Revert "vxlan: fix tos value before xmit"
ptp: only allow phase values lower than 1 period
farsync: switch from 'pci_' to 'dma_' API
wan: wanxl: switch from 'pci_' to 'dma_' API
hv_netvsc: do not use VF device if link is down
dpaa2-eth: Fix passing zero to 'PTR_ERR' warning
net: macb: Properly handle phylink on at91sam9x
...
while to come. Changes include:
- Some new Chinese translations
- Progress on the battle against double words words and non-HTTPS URLs
- Some block-mq documentation
- More RST conversions from Mauro. At this point, that task is
essentially complete, so we shouldn't see this kind of churn again for a
while. Unless we decide to switch to asciidoc or something...:)
- Lots of typo fixes, warning fixes, and more.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl8oVkwPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YoW8H/jJ/xnXFn7tkgVPQAlL3k5HCnK7A5nDP9RVR
cg1pTx1cEFdjzxPlJyExU6/v+AImOvtweHXC+JDK7YcJ6XFUNYXJI3LxL5KwUXbY
BL/xRFszDSXH2C7SJF5GECcFYp01e/FWSLN3yWAh+g+XwsKiTJ8q9+CoIDkHfPGO
7oQsHKFu6s36Af0LfSgxk4sVB7EJbo8e4psuPsP5SUrl+oXRO43Put0rXkR4yJoH
9oOaB51Do5fZp8I4JVAqGXvpXoExyLMO4yw0mASm6YSZ3KyjR8Fae+HD9Cq4ZuwY
0uzb9K+9NEhqbfwtyBsi99S64/6Zo/MonwKwevZuhtsDTK4l4iU=
=JQLZ
-----END PGP SIGNATURE-----
Merge tag 'docs-5.9' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"It's been a busy cycle for documentation - hopefully the busiest for a
while to come. Changes include:
- Some new Chinese translations
- Progress on the battle against double words words and non-HTTPS
URLs
- Some block-mq documentation
- More RST conversions from Mauro. At this point, that task is
essentially complete, so we shouldn't see this kind of churn again
for a while. Unless we decide to switch to asciidoc or
something...:)
- Lots of typo fixes, warning fixes, and more"
* tag 'docs-5.9' of git://git.lwn.net/linux: (195 commits)
scripts/kernel-doc: optionally treat warnings as errors
docs: ia64: correct typo
mailmap: add entry for <alobakin@marvell.com>
doc/zh_CN: add cpu-load Chinese version
Documentation/admin-guide: tainted-kernels: fix spelling mistake
MAINTAINERS: adjust kprobes.rst entry to new location
devices.txt: document rfkill allocation
PCI: correct flag name
docs: filesystems: vfs: correct flag name
docs: filesystems: vfs: correct sync_mode flag names
docs: path-lookup: markup fixes for emphasis
docs: path-lookup: more markup fixes
docs: path-lookup: fix HTML entity mojibake
CREDITS: Replace HTTP links with HTTPS ones
docs: process: Add an example for creating a fixes tag
doc/zh_CN: add Chinese translation prefer section
doc/zh_CN: add clearing-warn-once Chinese version
doc/zh_CN: add admin-guide index
doc:it_IT: process: coding-style.rst: Correct __maybe_unused compiler label
futex: MAINTAINERS: Re-add selftests directory
...
Pull crypto updates from Herbert Xu:
"API:
- Add support for allocating transforms on a specific NUMA Node
- Introduce the flag CRYPTO_ALG_ALLOCATES_MEMORY for storage users
Algorithms:
- Drop PMULL based ghash on arm64
- Fixes for building with clang on x86
- Add sha256 helper that does the digest in one go
- Add SP800-56A rev 3 validation checks to dh
Drivers:
- Permit users to specify NUMA node in hisilicon/zip
- Add support for i.MX6 in imx-rngc
- Add sa2ul crypto driver
- Add BA431 hwrng driver
- Add Ingenic JZ4780 and X1000 hwrng driver
- Spread IRQ affinity in inside-secure and marvell/cesa"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (157 commits)
crypto: sa2ul - Fix inconsistent IS_ERR and PTR_ERR
hwrng: core - remove redundant initialization of variable ret
crypto: x86/curve25519 - Remove unused carry variables
crypto: ingenic - Add hardware RNG for Ingenic JZ4780 and X1000
dt-bindings: RNG: Add Ingenic RNG bindings.
crypto: caam/qi2 - add module alias
crypto: caam - add more RNG hw error codes
crypto: caam/jr - remove incorrect reference to caam_jr_register()
crypto: caam - silence .setkey in case of bad key length
crypto: caam/qi2 - create ahash shared descriptors only once
crypto: caam/qi2 - fix error reporting for caam_hash_alloc
crypto: caam - remove deadcode on 32-bit platforms
crypto: ccp - use generic power management
crypto: xts - Replace memcpy() invocation with simple assignment
crypto: marvell/cesa - irq balance
crypto: inside-secure - irq balance
crypto: ecc - SP800-56A rev 3 local public key validation
crypto: dh - SP800-56A rev 3 local public key validation
crypto: dh - check validity of Z before export
lib/mpi: Add mpi_sub_ui()
...
Colin reports that the memcpy() call in xts_cts_final() trigggers a
"Overlapping buffer in memory copy" warning in Coverity, which is a
false postive, given that tail is guaranteed to be smaller than or
equal to the distance between source and destination.
However, given that any additional bytes that we copy will be ignored
anyway, we can simply copy XTS_BLOCK_SIZE unconditionally, which means
we can use struct assignment of the array members instead, which is
likely to be more efficient as well.
Addresses-Coverity: ("Overlapping buffer in memory copy")
Fixes: 8083b1bf81 ("crypto: xts - add support for ciphertext stealing")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
After the generation of a local public key, SP800-56A rev 3 section
5.6.2.1.3 mandates a validation of that key with a full validation
compliant to section 5.6.2.3.3.
Only if the full validation passes, the key is allowed to be used.
The patch adds the full key validation compliant to 5.6.2.3.3 and
performs the required check on the generated public key.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
After the generation of a local public key, SP800-56A rev 3 section
5.6.2.1.3 mandates a validation of that key with a full validation
compliant to section 5.6.2.3.1.
Only if the full validation passes, the key is allowed to be used.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
SP800-56A rev3 section 5.7.1.1 step 2 mandates that the validity of the
calculated shared secret is verified before the data is returned to the
caller. This patch adds the validation check.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Acked-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
SP800-56A rev3 section 5.7.1.2 step 2 mandates that the validity of the
calculated shared secret is verified before the data is returned to the
caller. Thus, the export function and the validity check functions are
reversed. In addition, the sensitive variables of priv and rand_z are
zeroized.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Reviewed-by: Vitaly Chikunov <vt@altlinux.org>
Acked-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The UDP reuseport conflict was a little bit tricky.
The net-next code, via bpf-next, extracted the reuseport handling
into a helper so that the BPF sk lookup code could invoke it.
At the same time, the logic for reuseport handling of unconnected
sockets changed via commit efc6b6f6c3
which changed the logic to carry on the reuseport result into the
rest of the lookup loop if we do not return immediately.
This requires moving the reuseport_has_conns() logic into the callers.
While we are here, get rid of inline directives as they do not belong
in foo.c files.
The other changes were cases of more straightforward overlapping
modifications.
Signed-off-by: David S. Miller <davem@davemloft.net>
Rework the remaining setsockopt code to pass a sockptr_t instead of a
plain user pointer. This removes the last remaining set_fs(KERNEL_DS)
outside of architecture specific code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> [ieee802154]
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Delete the doubled word "from" in multiple places.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There's no reason to have two interfaces when there's only one caller.
Removing _possible saves text and simplifies future changes.
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
padata_stop() has two callers and is unnecessary in both cases. When
pcrypt calls it before padata_free(), it's being unloaded so there are
no outstanding padata jobs[0]. When __padata_free() calls it, it's
either along the same path or else pcrypt initialization failed, which
of course means there are also no outstanding jobs.
Removing it simplifies padata and saves text.
[0] https://lore.kernel.org/linux-crypto/20191119225017.mjrak2fwa5vccazl@gondor.apana.org.au/
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
padata_start() is only used right after pcrypt allocates an instance
with all possible CPUs, when PADATA_INVALID can't happen, so there's no
need for a separate "start" step. It can be done during allocation to
save text, make using padata easier, and avoid unneeded calls in the
future.
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Just check for a NULL method instead of wiring up
sock_no_{get,set}sockopt.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Overly-generic names can cause problems like naming collisions,
confusing crash reports, and reduced grep-ability. E.g. see
commit d099ea6e6f ("crypto - Avoid free() namespace collision").
Clean this up for the lrw template by prefixing the names with "lrw_".
(I didn't use "crypto_lrw_" instead because that seems overkill.)
Also constify the tfm context in a couple places.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Overly-generic names can cause problems like naming collisions,
confusing crash reports, and reduced grep-ability. E.g. see
commit d099ea6e6f ("crypto - Avoid free() namespace collision").
Clean this up for the xts template by prefixing the names with "xts_".
(I didn't use "crypto_xts_" instead because that seems overkill.)
Also constify the tfm context in a couple places, and make
xts_free_instance() use the instance context structure so that it
doesn't just assume the crypto_skcipher_spawn is at the beginning.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CRYPTO_ALG_NEED_FALLBACK is handled inconsistently. When it's requested
to be clear, some templates propagate that request to child algorithms,
while others don't.
It's apparently desired for NEED_FALLBACK to be propagated, to avoid
deadlocks where a module tries to load itself while it's being
initialized, and to avoid unnecessarily complex fallback chains where we
have e.g. cbc-aes-$driver falling back to cbc(aes-$driver) where
aes-$driver itself falls back to aes-generic, instead of cbc-aes-$driver
simply falling back to cbc(aes-generic). There have been a number of
fixes to this effect:
commit 89027579bc ("crypto: xts - Propagate NEED_FALLBACK bit")
commit d2c2a85cfe ("crypto: ctr - Propagate NEED_FALLBACK bit")
commit e6c2e65c70 ("crypto: cbc - Propagate NEED_FALLBACK bit")
But it seems that other templates can have the same problems too.
To avoid this whack-a-mole, just add NEED_FALLBACK to INHERITED_FLAGS so
that it's always inherited.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The flag CRYPTO_ALG_ASYNC is "inherited" in the sense that when a
template is instantiated, the template will have CRYPTO_ALG_ASYNC set if
any of the algorithms it uses has CRYPTO_ALG_ASYNC set.
We'd like to add a second flag (CRYPTO_ALG_ALLOCATES_MEMORY) that gets
"inherited" in the same way. This is difficult because the handling of
CRYPTO_ALG_ASYNC is hardcoded everywhere. Address this by:
- Add CRYPTO_ALG_INHERITED_FLAGS, which contains the set of flags that
have these inheritance semantics.
- Add crypto_algt_inherited_mask(), for use by template ->create()
methods. It returns any of these flags that the user asked to be
unset and thus must be passed in the 'mask' to crypto_grab_*().
- Also modify crypto_check_attr_type() to handle computing the 'mask'
so that most templates can just use this.
- Make crypto_grab_*() propagate these flags to the template instance
being created so that templates don't have to do this themselves.
Make crypto/simd.c propagate these flags too, since it "wraps" another
algorithm, similar to a template.
Based on a patch by Mikulas Patocka <mpatocka@redhat.com>
(https://lore.kernel.org/r/alpine.LRH.2.02.2006301414580.30526@file01.intranet.prod.int.rdu2.redhat.com).
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
seqiv_create() is pointless because it just checks that the template is
being instantiated as an AEAD, then calls seqiv_aead_create(). But
seqiv_aead_create() does the exact same check, via aead_geniv_alloc().
Just remove seqiv_create() and use seqiv_aead_create() directly.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The type and mask arguments to aead_geniv_alloc() are always 0, so
remove them.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix to return negative error code -ENOMEM from kmalloc() error handling
case instead of 0, as done elsewhere in this function.
Fixes: f1774cb895 ("X.509: parse public key parameters from x509 for akcipher")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For a Linux server with NUMA, there are possibly multiple (de)compressors
which are either local or remote to some NUMA node. Some drivers will
automatically use the (de)compressor near the CPU calling acomp_alloc().
However, it is not necessarily correct because users who send acomp_req
could be from different NUMA node with the CPU which allocates acomp.
Just like kernel has kmalloc() and kmalloc_node(), here crypto can have
same support.
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some user-space programs rely on crypto requests that have no
control metadata. This broke when a check was added to require
the presence of control metadata with the ctx->init flag.
This patch fixes the regression by setting ctx->init as long as
one sendmsg(2) has been made, with or without a control message.
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes: f3c802a1f3 ("crypto: algif_aead - Only wake up when...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This file is almost compatible with ReST. Just minor changes
were needed:
- Adjust document and titles markups;
- Adjust numbered list markups;
- Add a comments markup for the Contents section;
- Add markups for literal blocks.
Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/c2275ea94e0507a01b020ab66dfa824d8b1c2545.1592203650.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
AEAD does not support partial requests so we must not wake up
while ctx->more is set. In order to distinguish between the
case of no data sent yet and a zero-length request, a new init
flag has been added to ctx.
SKCIPHER has also been modified to ensure that at least a block
of data is available if there is more data to come.
Fixes: 2d97591ef4 ("crypto: af_alg - consolidation of...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The locking in af_alg_release_parent is broken as the BH socket
lock can only be taken if there is a code-path to handle the case
where the lock is owned by process-context. Instead of adding
such handling, we can fix this by changing the ref counts to
atomic_t.
This patch also modifies the main refcnt to include both normal
and nokey sockets. This way we don't have to fudge the nokey
ref count when a socket changes from nokey to normal.
Credits go to Mauricio Faria de Oliveira who diagnosed this bug
and sent a patch for it:
https://lore.kernel.org/linux-crypto/20200605161657.535043-1-mfo@canonical.com/
Reported-by: Brian Moyles <bmoyles@netflix.com>
Reported-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Fixes: 37f96694cf ("crypto: af_alg - Use bh_lock_sock in...")
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Because SCHED_FIFO is a broken scheduler model (see previous patches)
take away the priority field, the kernel can't possibly make an
informed decision.
Use sched_set_fifo() to request SCHED_FIFO and delegate
actual priority selection to userspace. Effectively no change in
behaviour.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
The Jitter RNG is unconditionally allocated as a seed source follwoing
the patch 97f2650e50. Thus, the instance must always be deallocated.
Reported-by: syzbot+2e635807decef724a1fa@syzkaller.appspotmail.com
Fixes: 97f2650e50 ("crypto: drbg - always seeded with SP800-90B ...")
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When a crypto template needs to be instantiated, CRYPTO_MSG_ALG_REQUEST
is sent to crypto_chain. cryptomgr_schedule_probe() handles this by
starting a thread to instantiate the template, then waiting for this
thread to complete via crypto_larval::completion.
This can deadlock because instantiating the template may require loading
modules, and this (apparently depending on userspace) may need to wait
for the crc-t10dif module (lib/crc-t10dif.c) to be loaded. But
crc-t10dif's module_init function uses crypto_register_notifier() and
therefore takes crypto_chain.rwsem for write. That can't proceed until
the notifier callback has finished, as it holds this semaphore for read.
Fix this by removing the wait on crypto_larval::completion from within
cryptomgr_schedule_probe(). It's actually unnecessary because
crypto_alg_mod_lookup() calls crypto_larval_wait() itself after sending
CRYPTO_MSG_ALG_REQUEST.
This only actually became a problem in v4.20 due to commit b76377543b
("crc-t10dif: Pick better transform if one becomes available"), but the
unnecessary wait was much older.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207159
Reported-by: Mike Gerow <gerow@google.com>
Fixes: 398710379f ("crypto: algapi - Move larval completion into algboss")
Cc: <stable@vger.kernel.org> # v3.6+
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reported-by: Kai Lüke <kai@kinvolk.io>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Somewhere along the line the cap on the SG list length for receive
was lost. This patch restores it and removes the subsequent test
which is now redundant.
Fixes: 2d97591ef4 ("crypto: af_alg - consolidation of...")
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull READ/WRITE_ONCE rework from Will Deacon:
"This the READ_ONCE rework I've been working on for a while, which
bumps the minimum GCC version and improves code-gen on arm64 when
stack protector is enabled"
[ Side note: I'm _really_ tempted to raise the minimum gcc version to
4.9, so that we can just say that we require _Generic() support.
That would allow us to more cleanly handle a lot of the cases where we
depend on very complex macros with 'sizeof' or __builtin_choose_expr()
with __builtin_types_compatible_p() etc.
This branch has a workaround for sparse not handling _Generic(),
either, but that was already fixed in the sparse development branch,
so it's really just gcc-4.9 that we'd require. - Linus ]
* 'rwonce/rework' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux:
compiler_types.h: Use unoptimized __unqual_scalar_typeof for sparse
compiler_types.h: Optimize __unqual_scalar_typeof compilation time
compiler.h: Enforce that READ_ONCE_NOCHECK() access size is sizeof(long)
compiler-types.h: Include naked type in __pick_integer_type() match
READ_ONCE: Fix comment describing 2x32-bit atomicity
gcov: Remove old GCC 3.4 support
arm64: barrier: Use '__unqual_scalar_typeof' for acquire/release macros
locking/barriers: Use '__unqual_scalar_typeof' for load-acquire macros
READ_ONCE: Drop pointer qualifiers when reading from scalar types
READ_ONCE: Enforce atomicity for {READ,WRITE}_ONCE() memory accesses
READ_ONCE: Simplify implementations of {READ,WRITE}_ONCE()
arm64: csum: Disable KASAN for do_csum()
fault_inject: Don't rely on "return value" from WRITE_ONCE()
net: tls: Avoid assigning 'const' pointer to non-const pointer
netfilter: Avoid assigning 'const' pointer to non-const pointer
compiler/gcc: Raise minimum GCC version for kernel builds to 4.8
Now, in crypto-engine, if hardware queue is full (-ENOSPC),
requeue request regardless of MAY_BACKLOG flag.
If hardware throws any other error code (like -EIO, -EINVAL,
-ENOMEM, etc.) only MAY_BACKLOG requests are enqueued back into
crypto-engine's queue, since the others can be dropped.
The latter case can be fatal error, so those cannot be recovered from.
For example, in CAAM driver, -EIO is returned in case the job descriptor
is broken, so there is no possibility to fix the job descriptor.
Therefore, these errors might be fatal error, so we shouldn’t
requeue the request. This will just be pass back and forth between
crypto-engine and hardware.
Fixes: 6a89f492f8 ("crypto: engine - support for parallel requests based on retry mechanism")
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reported-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When building for ARMv7-M, clang-9 or higher tries to unroll some loops,
which ends up confusing the register allocator to the point of generating
rather bad code and using more than the warning limit for stack frames:
warning: stack frame size of 1200 bytes in function 'blake2b_compress' [-Wframe-larger-than=]
Forcing it to not unroll the final loop avoids this problem.
Fixes: 91d689337f ("crypto: blake2b - add blake2b generic implementation")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
<linux/cryptohash.h> sounds very generic and important, like it's the
header to include if you're doing cryptographic hashing in the kernel.
But actually it only includes the library implementation of the SHA-1
compression function (not even the full SHA-1). This should basically
never be used anymore; SHA-1 is no longer considered secure, and there
are much better ways to do cryptographic hashing in the kernel.
Remove this header and fold it into <crypto/sha.h> which already
contains constants and functions for SHA-1 (along with SHA-2).
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The library implementation of the SHA-1 compression function is
confusingly called just "sha_transform()". Alongside it are some "SHA_"
constants and "sha_init()". Presumably these are left over from a time
when SHA just meant SHA-1. But now there are also SHA-2 and SHA-3, and
moreover SHA-1 is now considered insecure and thus shouldn't be used.
Therefore, rename these functions and constants to make it very clear
that they are for SHA-1. Also add a comment to make it clear that these
shouldn't be used.
For the extra-misleadingly named "SHA_MESSAGE_BYTES", rename it to
SHA1_BLOCK_SIZE and define it to just '64' rather than '(512/8)' so that
it matches the same definition in <crypto/sha.h>. This prepares for
merging <linux/cryptohash.h> into <crypto/sha.h>.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of manually allocating a 'struct shash_desc' on the stack and
calling crypto_shash_digest(), switch to using the new helper function
crypto_shash_tfm_digest() which does this for us.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently the simplest use of the shash API is to use
crypto_shash_digest() to digest a whole buffer. However, this still
requires allocating a hash descriptor (struct shash_desc). Many users
don't really want to preallocate one and instead just use a one-off
descriptor on the stack like the following:
{
SHASH_DESC_ON_STACK(desc, tfm);
int err;
desc->tfm = tfm;
err = crypto_shash_digest(desc, data, len, out);
shash_desc_zero(desc);
}
Wrap this in a new helper function crypto_shash_tfm_digest() that can be
used instead of the above.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The SHA-256 / SHA-224 library functions can't fail, so remove the
useless return value.
Also long as the declarations are being changed anyway, also fix some
parameter names in the declarations to match the definitions.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
gcc-10 complains about using the name of a standard library
function in the kernel, as we are not building with -ffreestanding:
crypto/xts.c:325:13: error: conflicting types for built-in function 'free'; expected 'void(void *)' [-Werror=builtin-declaration-mismatch]
325 | static void free(struct skcipher_instance *inst)
| ^~~~
crypto/lrw.c:290:13: error: conflicting types for built-in function 'free'; expected 'void(void *)' [-Werror=builtin-declaration-mismatch]
290 | static void free(struct skcipher_instance *inst)
| ^~~~
crypto/lrw.c:27:1: note: 'free' is declared in header '<stdlib.h>'
The xts and lrw cipher implementations run into this because they do
not use the conventional namespaced function names.
It might be better to rename all local functions in those files to
help with things like 'ctags' and 'grep', but just renaming these two
avoids the build issue. I picked the more verbose crypto_xts_free()
and crypto_lrw_free() names for consistency with several other drivers
that do use namespaced function names.
Fixes: f1c131b454 ("crypto: xts - Convert to skcipher")
Fixes: 700cb3f5fe ("crypto: lrw - Convert to skcipher")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix to return negative error code -ENOMEM from the kzalloc error handling
case instead of 0, as done elsewhere in this function.
Reported-by: Xiumei Mu <xmu@redhat.com>
Fixes: db07cd26ac ("crypto: drbg - add FIPS 140-2 CTRNG for noise source")
Cc: <stable@vger.kernel.org>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Added support for batch requests, per crypto engine.
A new callback is added, do_batch_requests, which executes a
batch of requests. This has the crypto_engine structure as argument
(for cases when more than one crypto-engine is used).
The crypto_engine_alloc_init_and_set function, initializes
crypto-engine, but also, sets the do_batch_requests callback.
On crypto_pump_requests, if do_batch_requests callback is
implemented in a driver, this will be executed. The link between
the requests will be done in driver, if possible.
do_batch_requests is available only if the hardware has support
for multiple request.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Added support for executing multiple requests, in parallel,
for crypto engine based on a retry mechanism.
If hardware was unable to execute a backlog request, enqueue it
back in front of crypto-engine queue, to keep the order
of requests.
A new variable is added, retry_support (this is to keep the
backward compatibility of crypto-engine) , which keeps track
whether the hardware has support for retry mechanism and,
also, if can run multiple requests.
If do_one_request() returns:
>= 0: hardware executed the request successfully;
< 0: this is the old error path. If hardware has support for retry
mechanism, the request is put back in front of crypto-engine queue.
For backwards compatibility, if the retry support is not available,
the crypto-engine will work as before.
If hardware queue is full (-ENOSPC), requeue request regardless
of MAY_BACKLOG flag.
If hardware throws any other error code (like -EIO, -EINVAL,
-ENOMEM, etc.) only MAY_BACKLOG requests are enqueued back into
crypto-engine's queue, since the others can be dropped.
The new crypto_engine_alloc_init_and_set function, initializes
crypto-engine, sets the maximum size for crypto-engine software
queue (not hardcoded anymore) and the retry_support variable
is set, by default, to false.
On crypto_pump_requests(), if do_one_request() returns >= 0,
a new request is send to hardware, until there is no space in
hardware and do_one_request() returns < 0.
By default, retry_support is false and crypto-engine will
work as before - will send requests to hardware,
one-by-one, on crypto_pump_requests(), and complete it, on
crypto_finalize_request(), and so on.
To support multiple requests, in each driver, retry_support
must be set on true, and if do_one_request() returns an error
the request must not be freed, since it will be enqueued back
into crypto-engine's queue.
When all drivers, that use crypto-engine now, will be updated for
retry mechanism, the retry_support variable can be removed.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add crypto_enqueue_request_head function that enqueues a
request in front of queue.
This will be used in crypto-engine, on error path. In case a request
was not executed by hardware, enqueue it back in front of queue (to
keep the order of requests).
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
if CRYPTO_DRBG_CTR is builtin and CTR is module, allocating such algo
will fail.
DRBG: could not allocate CTR cipher TFM handle: ctr(aes)
alg: drbg: Failed to reset rng
alg: drbg: Test 0 failed for drbg_pr_ctr_aes128
DRBG: could not allocate CTR cipher TFM handle: ctr(aes)
alg: drbg: Failed to reset rng
alg: drbg: Test 0 failed for drbg_nopr_ctr_aes128
DRBG: could not allocate CTR cipher TFM handle: ctr(aes)
alg: drbg: Failed to reset rng
alg: drbg: Test 0 failed for drbg_nopr_ctr_aes192
DRBG: could not allocate CTR cipher TFM handle: ctr(aes)
alg: drbg: Failed to reset rng
alg: drbg: Test 0 failed for drbg_nopr_ctr_aes256
So let's select CTR instead of just depend on it.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As comment of the v2, Herbert said: "The SEQIV select from CTR is historical
and no longer necessary."
So let's get rid of it.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As the Jitter RNG provides an SP800-90B compliant noise source, use this
noise source always for the (re)seeding of the DRBG.
To make sure the DRBG is always properly seeded, the reseed threshold
is reduced to 1<<20 generate operations.
The Jitter RNG may report health test failures. Such health test
failures are treated as transient as follows. The DRBG will not reseed
from the Jitter RNG (but from get_random_bytes) in case of a health
test failure. Though, it produces the requested random number.
The Jitter RNG has a failure counter where at most 1024 consecutive
resets due to a health test failure are considered as a transient error.
If more consecutive resets are required, the Jitter RNG will return
a permanent error which is returned to the caller by the DRBG. With this
approach, the worst case reseed threshold is significantly lower than
mandated by SP800-90A in order to seed with an SP800-90B noise source:
the DRBG has a reseed threshold of 2^20 * 1024 = 2^30 generate requests.
Yet, in case of a transient Jitter RNG health test failure, the DRBG is
seeded with the data obtained from get_random_bytes.
However, if the Jitter RNG fails during the initial seeding operation
even due to a health test error, the DRBG will send an error to the
caller because at that time, the DRBG has received no seed that is
SP800-90B compliant.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
SP800-90B specifies various requirements for the noise source(s) that
may seed any DRNG including SP800-90A DRBGs. In November 2020,
SP800-90B will be mandated for all noise sources that provide entropy
to DRBGs as part of a FIPS 140-[2|3] validation or other evaluation
types. Without SP800-90B compliance, a noise source is defined to always
deliver zero bits of entropy.
This patch ports the SP800-90B compliance from the user space Jitter RNG
version 2.2.0.
The following changes are applied:
- addition of (an enhanced version of) the repetitive count test (RCT)
from SP800-90B section 4.4.1 - the enhancement is due to the fact of
using the stuck test as input to the RCT.
- addition of the adaptive proportion test (APT) from SP800-90B section
4.4.2
- update of the power-on self test to perform a test measurement of 1024
noise samples compliant to SP800-90B section 4.3
- remove of the continuous random number generator test which is
replaced by APT and RCT
Health test failures due to the SP800-90B operation are only enforced in
FIPS mode. If a runtime health test failure is detected, the Jitter RNG
is reset. If more than 1024 resets in a row are performed, a permanent
error is returned to the caller.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The variable err is being initialized with a value that is never read
and it is being updated later with a new value. The initialization is
redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There are two problems in crypto_spawn_alg. First of all it may
return spawn->alg even if spawn->dead is set. This results in a
double-free as detected by syzbot.
Secondly the setting of the DYING flag is racy because we hold
the read-lock instead of the write-lock. We should instead call
crypto_shoot_alg in a safe manner by gaining a refcount, dropping
the lock, and then releasing the refcount.
This patch fixes both problems.
Reported-by: syzbot+fc0674cde00b66844470@syzkaller.appspotmail.com
Fixes: 4f87ee118d ("crypto: api - Do not zap spawn->alg")
Fixes: 73669cc556 ("crypto: api - Fix race condition in...")
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently after any algorithm is registered and tested, there's an
unnecessary request_module("cryptomgr") even if it's already loaded.
Also, CRYPTO_MSG_ALG_LOADED is sent twice, and thus if the algorithm is
"crct10dif", lib/crc-t10dif.c replaces the tfm twice rather than once.
This occurs because CRYPTO_MSG_ALG_LOADED is sent using
crypto_probing_notify(), which tries to load "cryptomgr" if the
notification is not handled (NOTIFY_DONE). This doesn't make sense
because "cryptomgr" doesn't handle this notification.
Fix this by using crypto_notify() instead of crypto_probing_notify().
Fixes: dd8b083f9a ("crypto: api - Introduce notifier for new crypto algorithms")
Cc: <stable@vger.kernel.org> # v4.20+
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
It is very rare to see versions of GCC prior to 4.8 being used to build
the mainline kernel. These old compilers are also know to have codegen
issues which can lead to silent miscompilation:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58145
Raise the minimum GCC version for kernel build to 4.8 and remove some
tautological Kconfig dependencies as a consequence.
Cc: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Pull crypto updates from Herbert Xu:
"API:
- Fix out-of-sync IVs in self-test for IPsec AEAD algorithms
Algorithms:
- Use formally verified implementation of x86/curve25519
Drivers:
- Enhance hwrng support in caam
- Use crypto_engine for skcipher/aead/rsa/hash in caam
- Add Xilinx AES driver
- Add uacce driver
- Register zip engine to uacce in hisilicon
- Add support for OCTEON TX CPT engine in marvell"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits)
crypto: af_alg - bool type cosmetics
crypto: arm[64]/poly1305 - add artifact to .gitignore files
crypto: caam - limit single JD RNG output to maximum of 16 bytes
crypto: caam - enable prediction resistance in HRWNG
bus: fsl-mc: add api to retrieve mc version
crypto: caam - invalidate entropy register during RNG initialization
crypto: caam - check if RNG job failed
crypto: caam - simplify RNG implementation
crypto: caam - drop global context pointer and init_done
crypto: caam - use struct hwrng's .init for initialization
crypto: caam - allocate RNG instantiation descriptor with GFP_DMA
crypto: ccree - remove duplicated include from cc_aead.c
crypto: chelsio - remove set but not used variable 'adap'
crypto: marvell - enable OcteonTX cpt options for build
crypto: marvell - add the Virtual Function driver for CPT
crypto: marvell - add support for OCTEON TX CPT engine
crypto: marvell - create common Kconfig and Makefile for Marvell
crypto: arm/neon - memzero_explicit aes-cbc key
crypto: bcm - Use scnprintf() for avoiding potential buffer overflow
crypto: atmel-i2c - Fix wakeup fail
...
When working with bool values the true and false definitions should be used
instead of 1 and 0.
Hopefully I fixed my mailer and apologize for that.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Do test_aead_vs_generic_impl() before test_aead_inauthentic_inputs() so
that any differences with the generic driver are detected before getting
to the inauthentic input tests, which intentionally use only the driver
being tested (so that they run even if a generic driver is unavailable).
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
rfc4543 was missing from the list of algorithms that may treat the end
of the AAD buffer specially.
Also, with rfc4106, rfc4309, rfc4543, and rfc7539esp, the end of the AAD
buffer is actually supposed to contain a second copy of the IV, and
we've concluded that if the IV copies don't match the behavior is
implementation-defined. So, the fuzz tests can't easily test that case.
So, make the fuzz tests only use inputs where the two IV copies match.
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fixes: 40153b10d9 ("crypto: testmgr - fuzz AEADs against their generic implementation")
Cc: Stephan Mueller <smueller@chronox.de>
Originally-from: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Simplify the error handling in the XTS template's ->create() function by
taking advantage of crypto_drop_skcipher() now accepting (as a no-op) a
spawn that hasn't been grabbed yet.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Simplify the error handling in pkcs1pad_create() by taking advantage of
crypto_grab_akcipher() now handling an ERR_PTR() name and by taking
advantage of crypto_drop_akcipher() now accepting (as a no-op) a spawn
that hasn't been grabbed yet.
While we're at it, also simplify the way the hash_name optional argument
is handled. We only need to check whether it's present in one place,
and we can just assign directly to ctx->digest_info.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Simplify the error handling in pcrypt_create_aead() by taking advantage
of crypto_grab_aead() now handling an ERR_PTR() name and by taking
advantage of crypto_drop_aead() now accepting (as a no-op) a spawn that
hasn't been grabbed yet.
This required also making padata_free_shell() accept a NULL argument.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Simplify the error handling in the LRW template's ->create() function by
taking advantage of crypto_drop_skcipher() now accepting (as a no-op) a
spawn that hasn't been grabbed yet.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Simplify the error handling in aead_geniv_alloc() by taking advantage of
crypto_grab_aead() now handling an ERR_PTR() name and by taking
advantage of crypto_drop_aead() now accepting (as a no-op) a spawn that
hasn't been grabbed yet.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Simplify the error handling in crypto_rfc4543_create() by taking
advantage of crypto_grab_aead() now handling an ERR_PTR() name and by
taking advantage of crypto_drop_aead() now accepting (as a no-op) a
spawn that hasn't been grabbed yet.
Conveniently, this eliminates the 'ccm_name' variable which was
incorrectly named (it should have been 'gcm_name').
Also fix a weird case where a line was terminated by a comma rather than
a semicolon, causing the statement to be continued on the next line.
Fortunately the code still behaved as intended, though.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Simplify the error handling in crypto_rfc4106_create() by taking
advantage of crypto_grab_aead() now handling an ERR_PTR() name and by
taking advantage of crypto_drop_aead() now accepting (as a no-op) a
spawn that hasn't been grabbed yet.
Conveniently, this eliminates the 'ccm_name' variable which was
incorrectly named (it should have been 'gcm_name').
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Simplify the error handling in crypto_cts_create() by taking advantage
of crypto_grab_skcipher() now handling an ERR_PTR() name and by taking
advantage of crypto_drop_skcipher() now accepting (as a no-op) a spawn
that hasn't been grabbed yet.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Simplify the error handling in crypto_rfc3686_create() by taking
advantage of crypto_grab_skcipher() now handling an ERR_PTR() name and
by taking advantage of crypto_drop_skcipher() now accepting (as a no-op)
a spawn that hasn't been grabbed yet.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Simplify the error handling in the various cryptd_create_*() functions
by taking advantage of crypto_grab_*() now handling an ERR_PTR() name
and by taking advantage of crypto_drop_*() now accepting (as a no-op) a
spawn that hasn't been grabbed yet.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Simplify the error handling in crypto_rfc4309_create() by taking
advantage of crypto_grab_aead() now handling an ERR_PTR() name and by
taking advantage of crypto_drop_aead() now accepting (as a no-op) a
spawn that hasn't been grabbed yet.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix a weird case where a line was terminated by a comma rather than a
semicolon, causing the statement to be continued on the next line.
Fortunately the code still behaved as intended, though.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto/md5.c:26:0: warning: macro "MD5_DIGEST_WORDS" is not used [-Wunused-macros]
crypto/md5.c:27:0: warning: macro "MD5_MESSAGE_BYTES" is not used [-Wunused-macros]
They are never used since commit 3c7eb3cc83 ("md5: remove from
lib and only live in crypto").
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull IMA fixes from Mimi Zohar:
"Two bug fixes and an associated change for each.
The one that adds SM3 to the IMA list of supported hash algorithms is
a simple change, but could be considered a new feature"
* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: add sm3 algorithm to hash algorithm configuration list
crypto: rename sm3-256 to sm3 in hash_algo_name
efi: Only print errors about failing to get certs if EFI vars are found
x86/ima: use correct identifier for SetupMode variable
The name sm3-256 is defined in hash_algo_name in hash_info, but the
algorithm name implemented in sm3_generic.c is sm3, which will cause
the sm3-256 algorithm to be not found in some application scenarios of
the hash algorithm, and an ENOENT error will occur. For example,
IMA, keys, and other subsystems that reference hash_algo_name all use
the hash algorithm of sm3.
Fixes: 5ca4c20cfd ("keys, trusted: select hash algorithm for TPM2 chips")
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Reviewed-by: Pascal van Leeuwen <pvanleeuwen@rambus.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
- Enable paes-s390 cipher selftests in testmgr (acked-by Herbert Xu).
- Fix protected key length update in PKEY_SEC2PROTK ioctl and increase
card/queue requests counter to 64-bit in crypto code.
- Fix clang warning in get_tod_clock.
- Fix ultravisor info length extensions handling.
- Fix style of SPDX License Identifier in vfio-ccw.
- Avoid unnecessary GFP_ATOMIC and simplify ACK tracking in qdio.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAl5H4GUACgkQjYWKoQLX
FBh57gf+NNw5r1Ec3Y+H7uY4841n2uyW6HReb0qD4iSgPmH3d+WjQViCg9mbUCRh
MW4xfEizp/aTWEC8L8v0u/HHDApvWOHLiDdtWiTybHwHFIHyoE0OMV8V5lVDXP72
2/AefaKejfqW2L8K18le6NLr5jTTO3/G0F5PNmqFhdU3zoR/ic0ReKk0gPFZ38HI
NSc2DOu0KLEKhrE7dAPYNab/nqLiC/oAgTQsTCX/3XeImYsiiLC3PPNdNWiiHYf/
NmgIolxlug/ItEacLCfyfdZbX5/1gw1jZlSdUozUno5Hy1Wt5bZ4rAzg0ORojb/l
tB4CDBeIFG/r+HTX7bAONxRrhxa0hw==
=GZ7w
-----END PGP SIGNATURE-----
Merge tag 's390-5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Enable paes-s390 cipher selftests in testmgr (acked-by Herbert Xu).
- Fix protected key length update in PKEY_SEC2PROTK ioctl and increase
card/queue requests counter to 64-bit in crypto code.
- Fix clang warning in get_tod_clock.
- Fix ultravisor info length extensions handling.
- Fix style of SPDX License Identifier in vfio-ccw.
- Avoid unnecessary GFP_ATOMIC and simplify ACK tracking in qdio.
* tag 's390-5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
crypto/testmgr: enable selftests for paes-s390 ciphers
s390/time: Fix clk type in get_tod_clock
s390/uv: Fix handling of length extensions
s390/qdio: don't allocate *aob array with GFP_ATOMIC
s390/qdio: simplify ACK tracking
s390/zcrypt: fix card and queue total counter wrap
s390/pkey: fix missing length of protected key on return
vfio-ccw: Use the correct style for SPDX License Identifier
Pull crypto fix from Herbert Xu:
"This fixes a Kconfig anomaly when lib/crypto is enabled without Crypto
API"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: Kconfig - allow tests to be disabled when manager is disabled
This patch enables the selftests for the s390 specific protected key
AES (PAES) cipher implementations:
* cbc-paes-s390
* ctr-paes-s390
* ecb-paes-s390
* xts-paes-s390
PAES is an AES cipher but with encrypted ('protected') key
material. However, the paes ciphers are able to derive an protected
key from clear key material with the help of the pkey kernel module.
So this patch now enables the generic AES tests for the paes
ciphers. Under the hood the setkey() functions rearrange the clear key
values as clear key token and so the pkey kernel module is able to
provide protected key blobs from the given clear key values. The
derived protected key blobs are then used within the paes cipers and
should produce the very same results as the generic AES implementation
with the clear key values.
The s390-paes cipher testlist entries are surrounded
by #if IS_ENABLED(CONFIG_CRYPTO_PAES_S390) because they don't
make any sense on non s390 platforms or without the PAES
cipher implementation.
Link: http://lkml.kernel.org/r/20200213083946.zicarnnt3wizl5ty@gondor.apana.org.au
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
When running tcrypt skcipher speed tests, logs contain things like:
testing speed of async ecb(des3_ede) (ecb(des3_ede-generic)) encryption
or:
testing speed of async ecb(aes) (ecb(aes-ce)) encryption
The algorithm implementations are sync, not async.
Fix this inaccuracy.
Fixes: 7166e589da ("crypto: tcrypt - Use skcipher")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel