Splitting it into KB/MB is just confusing.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Not sure why somebody thought that this is a long.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Just use the system queue now that we don't block any more.
v2: handle DAL as well.
v3: agd: split DAL changes out
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Mykola Lysenko <mykola.lysenko@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com> (v1)
Just register an callback and reschedule the work item if necessary.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
wait_event() never returns before the fence was signaled.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
The release notifier can get called a second time from
mmu_notifier_unregister depending on a race between
__mmu_notifier_release and amdgpu_mn_destroy. Use
mmu_notifier_unregister_no_release to avoid this.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
This supports 420 and 422 subsampling with 2 or 3 planes, tested with
modetest. It doesn't set up chroma subsampling position (which it
appears KMS doesn't deal with yet).
The LBM memory is overallocated in many cases, but apparently the docs
aren't quite correct and I'll probably need to look at the hardware
source to really figure it out.
Signed-off-by: Eric Anholt <eric@anholt.net>
This implements a simple policy for choosing scaling modes
(trapezoidal for decimation, PPF for magnification), and a single PPF
filter (Mitchell/Netravali's recommendation).
Signed-off-by: Eric Anholt <eric@anholt.net>
This doesn't matter yet since we only allow 1:1 scaling, but the
comment clearly says we should be using the source size.
Signed-off-by: Eric Anholt <eric@anholt.net>
Previously we only did the primary and cursor plane, but overlay
planes are useful and just require this setup to add, since all planes
go into the HVS display list in the same way.
Signed-off-by: Eric Anholt <eric@anholt.net>
So far, we've only ever lit up one CRTC, so this has been fine. To
extend to more displays or more planes, we need to make sure we don't
run our display lists into each other.
Signed-off-by: Eric Anholt <eric@anholt.net>
Previously, on every modeset we would allocate new display list
memory, recompute changed planes, write all of them to the new memory,
and pointed scanout at the new list (which will latch approximately at
the next line of scanout). We let
drm_atomic_helper_wait_for_vblanks() decide whether we needed to wait
for a vblank after a modeset before cleaning up the old state and
letting the next modeset proceed, and on legacy cursor updates we
wouldn't wait. If you moved the cursor fast enough, we could
potentially wrap around the display list memory area and overwrite the
existing display list while it was still being scanned out, resulting
in the HVS scanning out garbage or just halting.
Instead of making cursor updates wait for scanout to move to the new
display list area (which introduces significant cursor lag in X), we
just rewrite our current display list.
Signed-off-by: Eric Anholt <eric@anholt.net>
So far, the i915 driver and some other drivers set it to the drm_device,
which doesn't allow one to know which DP a given aux channel is related
to. Changing this to be the drm_connector provides proper nesting, still
allowing one to get the drm_device from it. Some drivers already set it
to the drm_connector.
This also removes the need to add a sysfs link for the i2c device under
the connector, as it will already be there.
v9:
- As a side effect, drm_dp_aux_unregister() must be called before
intel_connector_unregister(), as both the aux.dev and the i2c adapter
dev are children of the drm_connector device now. Calling
drm_dp_aux_unregister() before prevents them from being destroyed
twice.
v10:
- move aux_fini() to connector_unregister(), instead of moving
drm_dp_aux_unregister() outside of connector_register().
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1453417821-2811-4-git-send-email-rafael.antognolli@intel.com
Rafael Antognolli's new DRM_DP_AUX_CHARDEV feature causes a WARN_ON
if drm_dp_aux->dev == drm_connector->kdev and drm_dp_aux_unregister()
is called after drm_connector_unregister(). radeon is the only driver
affected by this besides i915. (amdgpu calls drm_dp_aux_unregister()
before drm_connector_unregister().)
Cc: Rafael Antognolli <rafael.antognolli@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Split the sw and hw parts into separate functions.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Read back harvest configuration from registers and simplify
calculations. No need to program the raster config registers.
These are programmed as golden registers and the user mode
drivers program them as well.
v2: rebase on Tom's patches
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Don't use pointer arithmetic and fix the indentation.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This allows us to remove the kernel context and use a better
priority for the submissions.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This allows us to remove the kernel context and use a better
priority for the submissions.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This allows us to remove the global kernel context.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Distribute the load on both rings.
v2: use a loop for the initialization
v3: agd: rebase on upstream
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>