iov_iter for ep_read_iter can be ITER_UBUF with io_uring.
In that case dup_iter() does not have to allocate iov and it can
return NULL. Fix the assumption by checking for iter_is_ubuf()
other wise ep_read_iter can treat this as failure and return -ENOMEM.
Fixes: 1e23db450c ("io_uring: use iter_ubuf for single range imports")
Signed-off-by: Sandeep Dhavale <dhavale@google.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20230401060509.3608259-3-dhavale@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
iov_iter for ffs_epfile_read_iter can be ITER_UBUF with io_uring.
In that case dup_iter() does not have to allocate anything and it
can return NULL. ffs_epfile_read_iter treats this as a failure and
returns -ENOMEM. Fix it by checking if iter_is_ubuf().
Fixes: 1e23db450c ("io_uring: use iter_ubuf for single range imports")
Signed-off-by: Sandeep Dhavale <dhavale@google.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20230401060509.3608259-2-dhavale@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the unbind callback for f_uac1 and f_uac2, a call to snd_card_free()
via g_audio_cleanup() will disconnect the card and then wait for all
resources to be released, which happens when the refcount falls to zero.
Since userspace can keep the refcount incremented by not closing the
relevant file descriptor, the call to unbind may block indefinitely.
This can cause a deadlock during reboot, as evidenced by the following
blocked task observed on my machine:
task:reboot state:D stack:0 pid:2827 ppid:569 flags:0x0000000c
Call trace:
__switch_to+0xc8/0x140
__schedule+0x2f0/0x7c0
schedule+0x60/0xd0
schedule_timeout+0x180/0x1d4
wait_for_completion+0x78/0x180
snd_card_free+0x90/0xa0
g_audio_cleanup+0x2c/0x64
afunc_unbind+0x28/0x60
...
kernel_restart+0x4c/0xac
__do_sys_reboot+0xcc/0x1ec
__arm64_sys_reboot+0x28/0x30
invoke_syscall+0x4c/0x110
...
The issue can also be observed by opening the card with arecord and
then stopping the process through the shell before unbinding:
# arecord -D hw:UAC2Gadget -f S32_LE -c 2 -r 48000 /dev/null
Recording WAVE '/dev/null' : Signed 32 bit Little Endian, Rate 48000 Hz, Stereo
^Z[1]+ Stopped arecord -D hw:UAC2Gadget -f S32_LE -c 2 -r 48000 /dev/null
# echo gadget.0 > /sys/bus/gadget/drivers/configfs-gadget/unbind
(observe that the unbind command never finishes)
Fix the problem by using snd_card_free_when_closed() instead, which will
still disconnect the card as desired, but defer the task of freeing the
resources to the core once userspace closes its file descriptor.
Fixes: 132fcb4608 ("usb: gadget: Add Audio Class 2.0 Driver")
Cc: stable@vger.kernel.org
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Reviewed-by: John Keeping <john@metanate.com>
Link: https://lore.kernel.org/r/20230302163648.3349669-1-alvin@pqrs.dk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here is the big set of USB and Thunderbolt driver changes for 6.3-rc1.
Nothing major in here, just lots of good development, including:
- Thunderbolt additions for new device support and features
- xhci driver updates and cleanups
- USB gadget media driver updates (includes media core changes that
were acked by the v4l2 maintainers)
- lots of other USB gadget driver updates for new features
- dwc3 driver updates and fixes
- minor debugfs leak fixes
- typec driver updates and additions
- dt-bindings conversions to yaml
- other small bugfixes and driver updates
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/ivpQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymkdQCeOS6N613eggYrXwnbjJhxMQDtKAcAmweK6kXh
3o1IKOYqIMOx5E7zxn6W
=7ajf
-----END PGP SIGNATURE-----
Merge tag 'usb-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for 6.3-rc1.
Nothing major in here, just lots of good development, including:
- Thunderbolt additions for new device support and features
- xhci driver updates and cleanups
- USB gadget media driver updates (includes media core changes that
were acked by the v4l2 maintainers)
- lots of other USB gadget driver updates for new features
- dwc3 driver updates and fixes
- minor debugfs leak fixes
- typec driver updates and additions
- dt-bindings conversions to yaml
- other small bugfixes and driver updates
All have been in linux-next for a while with no reported issues"
* tag 'usb-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (237 commits)
usb: dwc3: xilinx: Remove unused of_gpio,h
usb: typec: pd: Add higher capability sysfs for sink PDO
usb: typec: pd: Remove usb_suspend_supported sysfs from sink PDO
usb: dwc3: pci: add support for the Intel Meteor Lake-M
usb: gadget: u_ether: Don't warn in gether_setup_name_default()
usb: gadget: u_ether: Convert prints to device prints
usb: gadget: u_serial: Add null pointer check in gserial_resume
usb: gadget: uvc: fix missing mutex_unlock() if kstrtou8() fails
xhci: host: potential NULL dereference in xhci_generic_plat_probe()
dt-bindings: usb: amlogic,meson-g12a-usb-ctrl: make G12A usb3-phy0 optional
usb: host: fsl-mph-dr-of: reuse device_set_of_node_from_dev
of: device: Do not ignore error code in of_device_uevent_modalias
of: device: Ignore modalias of reused nodes
usb: gadget: configfs: Fix set but not used variable warning
usb: gadget: uvc: Use custom strings if available
usb: gadget: uvc: Allow linking function to string descs
usb: gadget: uvc: Pick up custom string descriptor IDs
usb: gadget: uvc: Allow linking XUs to string descriptors
usb: gadget: configfs: Attach arbitrary strings to cdev
usb: gadget: configfs: Support arbitrary string descriptors
...
This is a follow-up to the deprecation of most of the old-style board
files that was merged in linux-6.0, removing them for good.
This branch is almost exclusively dead code removal based on those
annotations. Some device driver removals went through separate subsystem
trees, but the majority is in the same branch, in order to better handle
dependencies between the patches and avoid breaking bisection.
Unfortunately that leads to merge conflicts against other changes in the
subsystem trees, but they should all be trivial to resolve by removing
the files.
See commit 7d0d3fa733 ("Merge tag 'arm-boardfiles-6.0' of
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
description of which machines were marked unused and are now removed. The
only removals that got postponed are Terastation WXL (mv78xx0) and
Jornada720 (StrongARM1100), which turned out to still have potential
users.
-----BEGIN PGP SIGNATURE-----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=WejQ
-----END PGP SIGNATURE-----
Merge tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC boardfile updates from Arnd Bergmann
"Unused boardfile removal for 6.3
This is a follow-up to the deprecation of most of the old-style board
files that was merged in linux-6.0, removing them for good.
This branch is almost exclusively dead code removal based on those
annotations. Some device driver removals went through separate
subsystem trees, but the majority is in the same branch, in order to
better handle dependencies between the patches and avoid breaking
bisection.
Unfortunately that leads to merge conflicts against other changes in
the subsystem trees, but they should all be trivial to resolve by
removing the files.
See commit 7d0d3fa733 ("Merge tag 'arm-boardfiles-6.0' of
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
description of which machines were marked unused and are now removed.
The only removals that got postponed are Terastation WXL (mv78xx0) and
Jornada720 (StrongARM1100), which turned out to still have potential
users"
* tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits)
mmc: omap: drop TPS65010 dependency
ARM: pxa: restore mfp-pxa320.h
usb: ohci-omap: avoid unused-variable warning
ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs
ARM: s3c: remove obsolete s3c-cpu-freq header
MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal
MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal
ARM: remove CONFIG_UNUSED_BOARD_FILES
mfd: remove htc-pasic3 driver
w1: remove ds1wm driver
usb: remove ohci-tmio driver
fbdev: remove w100fb driver
fbdev: remove tmiofb driver
mmc: remove tmio_mmc driver
mfd: remove ucb1400 support
mfd: remove toshiba tmio drivers
rtc: remove v3020 driver
power: remove pda_power supply driver
ASoC: pxa: remove unused board support
pcmcia: remove unused pxa/sa1100 drivers
...
The function gether_setup_name_default() is called by various USB
ethernet gadget drivers. Calling this function will select a random
host and device MAC addresses. A properly working driver should be
silent and not warn the user about default MAC addresses selection.
Given that the MAC addresses are also printed when the function
gether_register_netdev() is called, remove these unnecessary warnings.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Link: https://lore.kernel.org/r/20230209125319.18589-2-jonathanh@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The USB ethernet gadget driver implements its own print macros which
call printk. Device drivers should use the device prints that print the
device name. Fortunately, the same macro names are defined in the header
file 'linux/usb/composite.h' and these use the device prints. Therefore,
remove the local definitions in the USB ethernet gadget driver and use
those in 'linux/usb/composite.h'. The only difference is that now the
device name is printed instead of the ethernet interface name.
Tested using ethernet gadget on Jetson AGX Orin.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20230209125319.18589-1-jonathanh@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Consider a case where gserial_disconnect has already cleared
gser->ioport. And if a wakeup interrupt triggers afterwards,
gserial_resume gets called, which will lead to accessing of
gser->ioport and thus causing null pointer dereference.Add
a null pointer check to prevent this.
Added a static spinlock to prevent gser->ioport from becoming
null after the newly added check.
Fixes: aba3a8d01d ("usb: gadget: u_serial: add suspend resume callbacks")
Cc: stable <stable@kernel.org>
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/1676309438-14922-1-git-send-email-quic_prashk@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If kstrtou8() fails, the mutex_unlock() is missed, move kstrtou8()
before mutex_lock() to fix it up.
Fixes: 0525210c98 ("usb: gadget: uvc: Allow definition of XUs in configfs")
Fixes: b3c839bd8a ("usb: gadget: uvc: Make bSourceID read/write")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20230213070926.776447-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 321b59870f.
This commit broke USB networking on Ingenic SoCs and maybe elsewhere.
The actual reason is unknown; and while a proper fix would be better,
we're sitting at -rc7 now, so a revert is justified - and we can work on
re-introducing this change for 6.3.
Fixes: 321b59870f ("usb: gadget: u_ether: Do not make UDC parent of the net device")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20230209105626.10597-1-paul@crapouillou.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the user has defined a custom string descriptor for the IAD or the
VideoStreaming interfaces then set their index field to point to the
custom descriptor instead of the hardcoded defaults. If no custom
descriptors have been linked to, then use the default ones.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20230206161802.892954-12-dan.scally@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the string descriptors for the IAD and VideoStreaming
Interfaces are hardcoded into f_uvc. Now that we can create arbitrary
string descriptors, add a mechanism to define string descriptors for
the IAD, VC and VS interfaces by linking to the appropriate directory
at function level.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20230206161802.892954-11-dan.scally@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If any custom string descriptors have been linked to from the
extension unit, pick up the string ID that was returned when
the strings were attached to the composite dev and use it to
set the iExtension field of the Extension Unit Descriptor.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20230206161802.892954-10-dan.scally@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add .allow_link() and .drop_link() callbacks to allow users to link
an extension unit descriptor to a string descriptor.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20230206161802.892954-9-dan.scally@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Attach any arbitrary strings that are defined to the composite dev.
We handle the old-style manufacturer, product and serialnumbers
strings in the same function for simplicity.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20230206161802.892954-8-dan.scally@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a framework to allow users to define arbitrary string descriptors
for a USB Gadget. This is modelled as a new type of config item rather
than as hardcoded attributes so as to be as flexible as possible.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20230206161802.892954-7-dan.scally@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The struct gadget_strings really represents a single language in
configfs. Rename it to make that more clear.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20230206161802.892954-6-dan.scally@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that extension unit support is available through configfs we need
to copy the descriptors for the XUs during uvc_function_bind() so that
they're exposed to the usb subsystem.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20230206161802.892954-5-dan.scally@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The UVC gadget at present has no support for extension units. Add the
infrastructure to uvc_configfs.c that allows users to create XUs via
configfs. These will be stored in a new child of uvcg_control_grp_type
with the name "extensions".
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20230206161802.892954-4-dan.scally@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The __uvcg_*frm_intrv() helper functions can be helpful when adding
support for similar attributes. Generalise the functions and
move them higher in the file for better coverage.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20230206161802.892954-3-dan.scally@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
At the moment, the UVC function graph is hardcoded IT -> PU -> OT.
To add XU support we need the ability to insert the XU descriptors
into the chain. To facilitate that, make the output terminal's
bSourceID attribute writeable so that we can configure its source.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20230206161802.892954-2-dan.scally@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow users to create new color matching descriptors in addition to
the default one. These must be associated with a UVC format in order
to be transmitted to the host, which is achieved by symlinking from
the format to the newly created color matching descriptor - extend
the uncompressed and mjpeg formats to support that linking operation.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20230202114142.300858-7-dan.scally@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In preparation for allowing more than the default color matching
descriptor, make the color matching attributes writeable.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20230202114142.300858-6-dan.scally@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A hardcoded default color matching descriptor is embedded in struct
f_uvc_opts but no longer has any use - remove it.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20230202114142.300858-5-dan.scally@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As currently implemented the default color matching descriptor is
appended after _all_ the formats and frames that the gadget is
configured with. According to the UVC specifications however this
is supposed to be on a per-format basis (section 3.9.2.6):
"Only one instance is allowed for a given format and if present,
the Color Matching descriptor shall be placed following the Video
and Still Image Frame descriptors for that format."
Associate the default color matching descriptor with struct
uvcg_format and copy it once-per-format instead of once only.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20230202114142.300858-4-dan.scally@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Color matching descriptors are meant to be a per-format piece of data
and we need to be able to support different descriptors for different
formats. As a preliminary step towards that goal, switch the default
color matching configfs functionality to point to an instance of a
new struct uvcg_color_matching. Use the same default values for its
attributes as the currently hard-coded ones so that the interface to
userspace is consistent.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20230202114142.300858-3-dan.scally@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Link: https://lore.kernel.org/r/20230202153235.2412790-12-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Link: https://lore.kernel.org/r/20230202153235.2412790-11-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.
Cc: Jakob Koschel <jakobkoschel@gmail.com>
Cc: Miaoqian Lin <linmq006@gmail.com>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://lore.kernel.org/r/20230202153235.2412790-10-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.
Cc: Kevin Cernekee <cernekee@gmail.com>
Link: https://lore.kernel.org/r/20230202153235.2412790-9-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.
Cc: Jakob Koschel <jakobkoschel@gmail.com>
Link: https://lore.kernel.org/r/20230202153235.2412790-8-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of zeroing some memory and then copying data in part or all of it,
use memcpy_and_pad().
This avoids writing some memory twice and should save a few cycles.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230202151736.64552-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We need the USB fixes in here, and this resolves a merge conflict with
the i915 driver as reported in linux-next
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The f_uvc code includes an interrupt endpoint against the VideoControl
interface. According to section 2.4.2 of the UVC specification however
this endpoint is optional in at least some cases:
"This endpoint is optional, but may be mandatory under certain
conditions"
The conditions enumerated are whether...
1. The device supports hardware triggers
2. The device implements any AutoUpdate controls
3. The device implements any Asynchronous controls
As all of those things are implementation dependent, this endpoint
might be unnecessary for some users. Further to that it is unusable
in the current implementation as there is no mechanism within the
UVC gadget driver that allows data to be sent over that endpoint.
Disable the interrupt endpoint by default, but check whether the
user has asked for it to be enabled in configfs and continue to
generate it if so.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20230130105045.120886-4-dan.scally@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a new attribute to the default control config group that allows
users to specify whether they want to enable the optional interrupt
endpoint for the VideoControl interface.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20230130105045.120886-3-dan.scally@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The f_uvc code defines an endpoint named "uvc_control_ep" but it
is configured with a non-zero endpoint address and has its
bmAttributes flagged as USB_ENDPOINT_XFER_INT - this cannot be the
VideoControl interface's control endpoint, as the default endpoint
0 is used for that purpose. This is instead the optional interrupt
endpoint that can be contained by a VideoControl interface. There
is also a Class-specific VC Interrupt Endpoint Descriptor and a
SuperSpeed companion descriptor that are also for the VC interface's
interrupt endpoint but are named as though they are for the control
endpoint.
Rename the variables to make that clear.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20230130105045.120886-2-dan.scally@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During enumeration or composition switch,a userspace process
agnostic of the conventions of configs can try to create function
symlinks even after the UDC is bound to current config which is
not correct. Potentially it can create duplicates within the
current config.
Prevent this by adding a check if udc_name already exists, then bail
out of cfg_link.
Following is an example:
Step1:
ln -s X1 ffs.a
-->cfg_link
--> usb_get_function(ffs.a)
->ffs_alloc
CFG->FUNC_LIST: <ffs.a>
C->FUNCTION: <empty>
Step2:
echo udc.name > /config/usb_gadget/g1/UDC
--> UDC_store
->composite_bind
->usb_add_function
CFG->FUNC_LIST: <empty>
C->FUNCTION: <ffs.a>
Step3:
ln -s Y1 ffs.a
-->cfg_link
-->usb_get_function(ffs.a)
->ffs_alloc
CFG->FUNC_LIST: <ffs.a>
C->FUNCTION: <ffs.a>
both the lists corresponds to the same function instance ffs.a
but the usb_function* pointer is different because in step 3
ffs_alloc has created a new reference to usb_function* for
ffs.a and added it to cfg_list.
Step4:
Now a composition switch involving <ffs.b,ffs.a> is executed.
the composition switch will involve 3 things:
1. unlinking the previous functions existing
2. creating new symlinks
3. writing UDC
However, the composition switch is generally taken care by
userspace process which creates the symlinks in its own
nomenclature(X*) and removes only those.
So it won't be able to remove Y1 which user had created
by own.
Due to this the new symlinks cannot be created for ffs.a
since the entry already exists in CFG->FUNC_LIST.
The state of the CFG->FUNC_LIST is as follows:
CFG->FUNC_LIST: <ffs.a>
Fixes: 88af8bbe4e ("usb: gadget: the start of the configfs interface")
Signed-off-by: Krishna Kurapati PSSNV <quic_kriskura@quicinc.com>
Signed-off-by: Udipto Goswami <quic_ugoswami@quicinc.com>
Link: https://lore.kernel.org/r/20230201132308.31523-1-quic_ugoswami@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The USB_XHCI_RZV2M and USB_RENESAS_USB3 select other drivers
based on the enabled SoC types, which leads to build failures
when the dependencies are not met:
WARNING: unmet direct dependencies detected for USB_RZV2M_USB3DRD
Depends on [n]: USB_SUPPORT [=y] && USB_GADGET [=n] && (ARCH_R9A09G011 [=n] || COMPILE_TEST [=y])
Selected by [m]:
- USB_XHCI_RZV2M [=m] && USB_SUPPORT [=y] && USB [=y] && USB_XHCI_HCD [=m] && USB_XHCI_PLATFORM [=m] && (ARCH_R9A09G011 [=n] || COMPILE_TEST [=y])
ERROR: modpost: "rzv2m_usb3drd_reset" [drivers/usb/host/xhci-plat-hcd.ko] undefined!
The xhci-rcar driver has a reverse dependency with the xhci core, and it
depends on the UDC driver in turn. To untangle this, make the xhci-rcar.ko
driver a standalone module that just calls into the xhci-plat.ko module
like other drivers do.
This allows handling the dependency on the USB_RZV2M_USB3DRD driver to
only affect the xhci-rcar module and simplify the xhci-plat module.
It also allows leaving out the hacks for broken dma mask and nested
devices from the rcar side and keep that only in the generic xhci driver.
As a future cleanup, the marvell and dwc3 specific bits of xhci-plat.c
could be moved out as well, but that is not required for this bugfix.
Fixes: c52c9acc41 ("xhci: host: Add Renesas RZ/V2M SoC support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230131150531.12347-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Before the commit fc274c1e99 ("USB: gadget: Add a new bus for gadgets")
gadget driver.bus was unused. For whatever reason, many UDC drivers set
this field explicitly to NULL in udc_start(). With the newly added gadget
bus, doing this will crash the driver during the attach.
The problem was first reported, fixed and tested with OMAP UDC and g_ether.
Other drivers are changed based on code analysis only.
Fixes: fc274c1e99 ("USB: gadget: Add a new bus for gadgets")
Cc: stable <stable@kernel.org>
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20230201220125.GD2415@darkstar.musicnaut.iki.fi
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We have two types for UUIDs depending on the byte ordering.
Instead of explaining how bytes should go over the wire,
use dedicated APIs and data types. This removes a confusion
over the byte ordering.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-By: Jó Ágila Bitsch <jgilab@gmail.com>
Link: https://lore.kernel.org/r/20230125143425.85268-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since v4l2_fill_fmtdesc will be called in the ioctl v4l_enum_fmt anyway.
We can set the format description and compressed flag from v4l_fill_fmtdesc
and can remove the extra name field in uvc_format_desc.
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Tested-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20230126231456.3402323-6-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since the uvc_fmts array can not be modified we declare it const and
change every user of the uvc_format_by_guid function aswell.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Tested-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20230126231456.3402323-5-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The media driver USB_VIDEO_CLASS and USB_F_UVC are using the same
function uvc_format_by_guid. Since the function is inline, every user
will get a copy of the used uvc_fmts array and the function. This patch
moves the code to an own compile unit and add this dependency as
UVC_COMMON to both users.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Tested-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20230126231456.3402323-4-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since the headerfile is only used in usb devices it is better
placed with the other usb files.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Tested-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20230126231456.3402323-3-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently connect/disconnect of USB cable calls afunc_bind and
eventually increments the bNumEndpoints. Performing multiple
plugin/plugout will increment bNumEndpoints incorrectly, and on
the next plug-in it leads to invalid configuration of descriptor
and hence enumeration fails.
Fix this by resetting the value of bNumEndpoints to 1 on every
afunc_bind call.
Fixes: 40c73b3054 ("usb: gadget: f_uac2: add adaptive sync support for capture")
Cc: stable <stable@kernel.org>
Signed-off-by: Pratham Pratap <quic_ppratap@quicinc.com>
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Link: https://lore.kernel.org/r/1674631645-28888-1-git-send-email-quic_prashk@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As RZ/V2M has both HOST and PERI reset module, we need to do reset release
before accessing registers in respective IP module.
This patch adds role switch support for RZ/V2M.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230121145853.4792-7-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sandeep Dhavale