This is for tui browser only. This patch will check the returned key of
tui hists browser, if it's K_SWITH_INPUT_DATA, then recreate a session
for the new selected data file.
V2: Move the setup_brower() before the "repeat" jump point.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1359873501-24541-2-git-send-email-feng.tang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add report.group config option for setting default value of event
group view. It affects the report output only if perf.data contains
event group info.
A user can write .perfconfig file like below to enable group view by
default:
$ cat ~/.perfconfig
[report]
group = true
And it can be disabled through command line:
$ perf report --no-group
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-19-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When using event group viewer, it's better to show the group description
rather than the leader information alone.
If a leader did not contain any member, it's a non-group event.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-17-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since we have all necessary information in the leader events and other
members don't, bypass members. Member events will be shown along with
the leaders if event group is enabled.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-16-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now the event grouping viewing requires linking all member hists in a
group to the leader's. Thus hists__output_resort should be called after
linking all events in evlist.
Introduce symbol_conf.event_group flag to determine whether the feature
is enabled or not.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add description of sort keys to the perf-report document and also add
missing cpu and srcline keys to the command line help string.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1356599507-14226-11-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That consolidates the grouping of host + guests, isolating a bit more of
functionality now centered on 'perf_session' that can be used
independently in tools that don't need a 'perf_session' instance, but
needs to have all the thread/map/symbol machinery.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-c700rsiphpmzv8klogojpfut@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding perf_hpp__list list to register and contain all period related
columns the command is interested in.
This way we get rid of static array holding all possible columns and
enable commands to register their own columns.
It'll be handy for diff command in future to process and display data
for multiple files.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-kiykge4igrcl7etmpmveto1h@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David reported that current perf report refused to run on a data file
captured from a different machine because of objdump.
Since the objdump tools won't be used unless annotation was requested,
checking its presence at init time doesn't make sense.
Reported-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Irina Tirdea <irina.tirdea@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351835406-15208-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently various hist browser functions receive 3 arguments for
refreshing histogram but only used from a few places. Also it's only
for perf top command so that it can be NULL for other (and probably
most) cases. Pack them into a struct in order to reduce number of those
unused arguments.
This is a mechanical change and does not intend a functional change.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Irina Tirdea <irina.tirdea@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351835406-15208-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently many perf commands annotate/evlist/report/script/lock etc all
support "-i" option to chose a specific perf data, and all of them
create a local "input_name" to save the file name for that perf data.
Since most of these commands need it, we can add a global variable for
it, also it can some other benefits:
1. When calling script browser inside hists/annotation browser, it needs
to know the perf data file name to run that script.
2. For further feature like runtime switching to another perf data file,
this variable can also help.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1351569369-26732-2-git-send-email-feng.tang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As we have architecture information of saved perf.data file, we can try
to find cross-built objdump path.
The triplets include support for Android (arm, x86 and mips
architectures).
Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Originally-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1350344020-8071-5-git-send-email-irina.tirdea@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we were processing a PERF_RECORD_EXIT event we first used
machine__findnew_thread for both the thread exiting and for its parent,
only to use just the thread struct associated with the one exiting, and
to just delete it.
If it existed, i.e. not created at this very moment in
machine__findnew_thread, it will be moved to the machine->dead_threads
linked list, because we may have hist_entries pointing to it, but if it
was created just do be deleted, it will just sit there with no
references at all.
Use the new machine__find_thread() method so that if it is not there, we
don't create it.
As a bonus the parent thread will also not be created at this point.
Create process_fork() and process_exit() helpers to use this and make
the builtins use it instead of the generic process_task(), ditched by
this patch.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-z7n2y98ebjyrvmytaope4vdl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding perf_hpp__column_enable function to enable/disable hists column
and removing diff command specific stuff 'need_pair and
show_displacement' from hpp code.
The diff command now enables/disables columns separately according to
the user arguments. This will be helpful in future patches where more
columns are added into diff output.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1349354994-17853-6-git-send-email-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The hists pointer is now part of the 'struct hist_entry'.
And since the overhead and baseline columns are split now, there's no
reason to pass it through the output path.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1349354994-17853-5-git-send-email-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving the position calculation into the diff command, so the position
as prepared inside struct hist_entry data and there's no need to compute
in the output display path.
Removing 'displacement' from struct perf_hpp as it is no longer needed.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1349354994-17853-3-git-send-email-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf_hpp__init() function was only called from setup_browser() so
that the pipe-mode missed the initialization thus didn't respond to
related options. Fix it.
Reported-by: Robert Richter <robert.richter@amd.com>
Tested-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-tip-commits@vger.kernel.org
Link: http://lkml.kernel.org/r/87txv28spl.fsf_-_@sejong.aot.lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The integrated annotation feature is supported only in TUI mode. Also
it should be enabled with 'symbol' sort key otherwise resulting hist
entry doesn't need to have same symbol as of a sample so that it can
fail on hist_entry__inc_addr_samples with -ERANGE.
You can easily see it when start perf report TUI without symbol* sort
key. This patch fixes the problem.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1347611729-16994-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf defines both __used and __unused variables to use for marking
unused variables. The variable __used is defined to
__attribute__((__unused__)), which contradicts the kernel definition to
__attribute__((__used__)) for new gcc versions. On Android, __used is
also defined in system headers and this leads to warnings like: warning:
'__used__' attribute ignored
__unused is not defined in the kernel and is not a standard definition.
If __unused is included everywhere instead of __used, this leads to
conflicts with glibc headers, since glibc has a variables with this name
in its headers.
The best approach is to use __maybe_unused, the definition used in the
kernel for __attribute__((unused)). In this way there is only one
definition in perf sources (instead of 2 definitions that point to the
same thing: __used and __unused) and it works on both Linux and Android.
This patch simply replaces all instances of __used and __unused with
__maybe_unused.
Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1347315303-29906-7-git-send-email-irina.tirdea@intel.com
[ committer note: fixed up conflict with a116e05 in builtin-sched.c ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When analyzing perf data from hosts of other architecture than one of
the local host it's useful to call objdump that is part of a toolchain
for that architecture. Instead of calling regular objdump, call one that
user specified in command line.
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Acked-by: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1346754750.16299.3.camel@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This brings the support for DWARF cfi unwinding on perf post
processing. Call frame informations are retrieved and then passed
to libunwind that requests memory and register content from the
applications.
Adding unwind object to handle the user stack backtrace based
on the user register values and user stack dump.
The unwind object access the libunwind via remote interface
and provides to it all the necessary data to unwind the stack.
The unwind interface provides following function:
unwind__get_entries
And callback (specified in above function) to retrieve
the backtrace entries:
typedef int (*unwind_entry_cb_t)(struct unwind_entry *entry,
void *arg);
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Original-patch-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Benjamin Redelings <benjamin.redelings@nescent.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1344345647-11536-12-git-send-email-jolsa@redhat.com
[ Replaced use of perf_session by usage of perf_evsel ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Removing perf_session->sample_type, as it can be obtained from the
evsel/evlist.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-mnt1zwlik7sp7z6ljc9kyefg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The pipeline:
perf record -a -g -o - sleep 5 |perf inject -v -b | perf report -g -i -
generates the warning:
Selected -g but no callchain data. Did you call 'perf record' without -g?
The problem is that the header data is not written to the pipe, so the
sample_type has not been available when perf_report__setup_sample_type
is called. For pipe mode, record dumps the sample type as part of the
synthesized events stream -- perf_event__synthesize_attrs(). Handle this
be detecting pipe mode and not doing early sanity checks on sample_type.
Signed-off-by: David Ahern <dsahern@gmail.com>
Tested-by: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Link: http://lkml.kernel.org/r/1339444121-26236-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we don't use global variables that could make us misreport event
names when having a multi window top, for instance.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-mccancovi1u0wdkg8ncth509@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf top -G has a race on callchain cursor between main thread and
display thread. Since the callchain cursors are used locally make them
thread-local data would solve the problem.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Reported-by: Sunjin Yang <fan4326@gmail.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sunjin Yang <fan4326@gmail.com>
Link: http://lkml.kernel.org/r/1338443007-24857-1-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In non symbolic views, i.e. --sort without "symbol", as in:
perf report --sort comm
We're segfaulting in the --tui because we're testing the symbol resolved
and then trying to use the symbol on the histogram entry where we're
coalescing all hits for a COMM, and the first hist_entry for a comm may
have a NULL symbol, i.e. the RIP didn't resolve to any symbol.
In this case we're segfaulting, fix it by testing against the symbol in
the histogram entry.
Reported-by: William Cohen <wcohen@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-8ylwubbcmu27ucc9ffrku3yv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There were places where use ui__warning (or even fprintf) to show
critical messages. This patch converts them to ui__error so that the
front-end code can implement appropriate behavior.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1338265382-6872-3-git-send-email-namhyung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Merge reason: We are going to queue up a dependent patch:
"perf tools: Move parse event automated tests to separated object"
That depends on:
commit e7c72d8
perf tools: Add 'G' and 'H' modifiers to event parsing
Conflicts:
tools/perf/builtin-stat.c
Conflicted with the recent 'perf_target' patches when checking the
result of perf_evsel open routines to see if a retry is needed to cope
with older kernels where the exclude guest/host perf_event_attr bits
were not used.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now setup_browser can handle gtk2 front-end so split the TUI code to
ui/tui/setup.c in order to remove dependency.
To this end, make ui__init/exit global symbols and take an argument.
Also split gtk code to ui/gtk/setup.c.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1335761711-31403-5-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We use double underscore characters to distinguish its subsystem and
actual function name.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1335761711-31403-4-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As perf doesn't allow to specify gtk command-line option, drop the
arguments and pass NULL to gtk_init().
This makes the function easier to be called from setup_browser().
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1335761711-31403-3-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
While testing https://lkml.org/lkml/2012/4/10/123 I hit this crash:
(gdb) bt
0 0x000000000042000f in __cmd_report (rep=0x7fff80cec580) at builtin-report.c:380
1 cmd_report (argc=0, argv=<optimized out>, prefix=<optimized out>) at builtin-report.c:759
2 0x0000000000414513 in run_builtin (p=0x7724a8, argc=3, argv=0x7fff80ceca70) at perf.c:273
3 0x0000000000413d41 in handle_internal_command (argv=0x7fff80ceca70, argc=3) at perf.c:345
4 run_argv (argv=0x7fff80cec880, argcp=0x7fff80cec88c) at perf.c:389
5 main (argc=3, argv=0x7fff80ceca70) at perf.c:487
kernel_map can be NULL, so need to handle it while dumping a warning
to user.
v2:
- fixed RB_EMPTY_ROOT check -- desc takes the altnerative output when RB_EMPTY_ROOT is false.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Link: http://lkml.kernel.org/r/1334544855-55021-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch prints the number of samples and the count of performance
events separately.
This allows comparing performance of different applications with each
other.
Previously, the sample count was displayed against an 'Events:' heading.
With this patch, the header now reads (for example):
Samples: 5K of event 'instructions'
Event count (approx.): 2993026545
The patch covers both the stdio and the browser interface.
Signed-off-by: Ashay Rane <ashay.rane@tacc.utexas.edu>
[ committer note: Fixed wrt e7f01d1 ]
Link: http://lkml.kernel.org/n/tip-h4nfjm8msedlk8gxkzivfh5y@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds a simple GTK2-based browser to 'perf report' that's
based on the TTY-based browser in builtin-report.c.
To launch "perf report" using the new GTK interface just type:
$ perf report --gtk
The interface is somewhat limited in features at the moment:
- No callgraph support
- No KVM guest profiling support
- No color coding for percentages
- No sorting from the UI
- ..and many, many more!
That said, I think this patch a reasonable start to build future features on.
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Cc: Colin Walters <walters@verbum.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1202231952410.6689@tux.localdomain
[ committer note: Added #pragma to make gtk no strict prototype problem go
away as suggested by Colin Walters modulo avoiding push/pop ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As Ingo requested, it'd be better off treating first (and the only)
argument as a symbol filter, so that user doesn't need to input the
symbol on the dialog window on TUI.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1331887855-874-5-git-send-email-namhyung.kim@lge.com
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add new --symbol-filter command line option to set appropriate filter
string.
Its short version is missing as I couldn't find an ideal one and
--filter option of perf record also has no short version.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1331887855-874-4-git-send-email-namhyung.kim@lge.com
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds support for taken branch sampling, i.e, the
PERF_SAMPLE_BRANCH_STACK feature to perf report. In other
words, to display histograms based on taken branches rather
than executed instructions addresses.
The new option is called -b and it takes no argument. To
generate meaningful output, the perf.data must have been
obtained using perf record -b xxx ... where xxx is a branch
filter option.
The output shows symbols, modules, sorted by 'who branches
where' the most often. The percentages reported in the first
column refer to the total number of branches captured and
not the usual number of samples.
Here is a quick example.
Here branchy is simple test program which looks as follows:
void f2(void)
{}
void f3(void)
{}
void f1(unsigned long n)
{
if (n & 1UL)
f2();
else
f3();
}
int main(void)
{
unsigned long i;
for (i=0; i < N; i++)
f1(i);
return 0;
}
Here is the output captured on Nehalem, if we are
only interested in user level function calls.
$ perf record -b any_call,u -e cycles:u branchy
$ perf report -b --sort=symbol
52.34% [.] main [.] f1
24.04% [.] f1 [.] f3
23.60% [.] f1 [.] f2
0.01% [k] _IO_new_file_xsputn [k] _IO_file_overflow
0.01% [k] _IO_vfprintf_internal [k] _IO_new_file_xsputn
0.01% [k] _IO_vfprintf_internal [k] strchrnul
0.01% [k] __printf [k] _IO_vfprintf_internal
0.01% [k] main [k] __printf
About half (52%) of the call branches captured are from main()
-> f1(). The second half (24%+23%) is split in two equal shares
between f1() -> f2(), f1() ->f3(). The output is as expected
given the code.
It should be noted, that using -b in perf record does not
eliminate information in the perf.data file. Consequently, a
typical profile can also be obtained by perf report by simply
not using its -b option.
It is possible to sort on branch related columns:
- dso_from, symbol_from
- dso_to, symbol_to
- mispredict
Signed-off-by: Roberto Agostino Vitillo <ravitillo@lbl.gov>
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: peterz@infradead.org
Cc: acme@redhat.com
Cc: robert.richter@amd.com
Cc: ming.m.lin@intel.com
Cc: andi@firstfloor.org
Cc: asharma@fb.com
Cc: vweaver1@eecs.utk.edu
Cc: khandual@linux.vnet.ibm.com
Cc: dsahern@gmail.com
Link: http://lkml.kernel.org/r/1328826068-11713-14-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The default input file for perf report is not handled the same way as
perf record does it for its output file. This leads to unexpected
behavior of perf report, etc. E.g.:
# perf record -a -e cpu-cycles sleep 2 | perf report | cat
failed to open perf.data: No such file or directory (try 'perf record' first)
While perf record writes to a fifo, perf report expects perf.data to be
read. This patch changes this to accept fifos as input file.
Applies to the following commands:
perf annotate
perf buildid-list
perf evlist
perf kmem
perf lock
perf report
perf sched
perf script
perf timechart
Also fixes char const* -> const char* type declaration for filename
strings.
v2:
* Prevent potential null pointer access to input_name in
builtin-report.c. Needed due to removal of patch "perf report: Setup
browser if stdout is a pipe"
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1323248577-11268-5-git-send-email-robert.richter@amd.com
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf report does not take a command from command line.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1323703017-6060-8-git-send-email-namhyung@gmail.com
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The '--call-graph' command line option can receive undocumented optional
print_limit argument. Besides, use strtoul() to parse the option since
its type is u32.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1323703017-6060-2-git-send-email-namhyung@gmail.com
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently the meaning of -C varies by perf command: for perf-top,
perf-stat, perf-record it means cpu list. For perf-report it means comm
list. Then perf-annotate, perf-report and perf-script use -c for cpu
list.
Fix annotate, report and script to use -C for cpu list to be consistent
with top, stat and record. This means report needs to use -c for comm
list which does introduce a backward compatibility change.
v1 -> v2
- update perf-script.txt too
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1321209008-7004-1-git-send-email-dsahern@gmail.com
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To better reflect that it became the base class for all tools, that must
be in each tool struct and where common stuff will be put.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-qgpc4msetqlwr8y2k7537cxe@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reducing the exposure of perf_session further, so that we can use the
classes in cases where no perf.data file is created.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-stua66dcscsezzrcdugvbmvd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we don't need to have that many globals.
Next steps will remove the 'session' pointer, that in most cases is
not needed.
Then we can rename perf_event_ops to 'perf_tool' that better describes
this class hierarchy.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-wp4djox7x6w1i2bab1pt4xxp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Paving the way to remove these globals when we change the perf_event_ops
to receive as a first parameter a pointer to a perf_event_ops that will
then provide access to perf_report via container_of.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-2eh2vi2nb5z3tg1lvoxv09xu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since we have it in evsel->hists.callchain_cursor, remove it from
perf_session.
One more step in disentangling several places from requiring a
perf_session pointer.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-rxr5dj3di7ckyfmnz0naku1z@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since symbol__alloc_hists need it, to avoid passing it around in many
functions have it in the symbol_conf struct.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-cwv8ysvpywzjq4v3xtbd4zwv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And add the annotation output knobs to all the tools that have
integrated annotation (top, report).
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-gnlob67mke6sji2kf4nstp7m@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The goal of this patch is to include more information about the host
environment into the perf.data so it is more self-descriptive. Overtime,
profiles are captured on various machines and it becomes hard to track
what was recorded, on what machine and when.
This patch provides a way to solve this by extending the perf.data file
with basic information about the host machine. To add those extensions,
we leverage the feature bits capabilities of the perf.data format. The
change is backward compatible with existing perf.data files.
We define the following useful new extensions:
- HEADER_HOSTNAME: the hostname
- HEADER_OSRELEASE: the kernel release number
- HEADER_ARCH: the hw architecture
- HEADER_CPUDESC: generic CPU description
- HEADER_NRCPUS: number of online/avail cpus
- HEADER_CMDLINE: perf command line
- HEADER_VERSION: perf version
- HEADER_TOPOLOGY: cpu topology
- HEADER_EVENT_DESC: full event description (attrs)
- HEADER_CPUID: easy-to-parse low level CPU identication
The small granularity for the entries is to make it easier to extend
without breaking backward compatiblity. Many entries are provided as
ASCII strings.
Perf report/script have been modified to print the basic information as
easy-to-parse ASCII strings. Extended information about CPU and NUMA
topology may be requested with the -I option.
Thanks to David Ahern for reviewing and testing the many versions of
this patch.
$ perf report --stdio
# ========
# captured on : Mon Sep 26 15:22:14 2011
# hostname : quad
# os release : 3.1.0-rc4-tip
# perf version : 3.1.0-rc4
# arch : x86_64
# nrcpus online : 4
# nrcpus avail : 4
# cpudesc : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
# cpuid : GenuineIntel,6,15,11
# total memory : 8105360 kB
# cmdline : /home/eranian/perfmon/official/tip/build/tools/perf/perf record date
# event : name = cycles, type = 0, config = 0x0, config1 = 0x0, config2 = 0x0, excl_usr = 0, excl_kern = 0, id = { 29, 30, 31,
# HEADER_CPU_TOPOLOGY info available, use -I to display
# HEADER_NUMA_TOPOLOGY info available, use -I to display
# ========
#
...
$ perf report --stdio -I
# ========
# captured on : Mon Sep 26 15:22:14 2011
# hostname : quad
# os release : 3.1.0-rc4-tip
# perf version : 3.1.0-rc4
# arch : x86_64
# nrcpus online : 4
# nrcpus avail : 4
# cpudesc : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
# cpuid : GenuineIntel,6,15,11
# total memory : 8105360 kB
# cmdline : /home/eranian/perfmon/official/tip/build/tools/perf/perf record date
# event : name = cycles, type = 0, config = 0x0, config1 = 0x0, config2 = 0x0, excl_usr = 0, excl_kern = 0, id = { 29, 30, 31,
# sibling cores : 0-3
# sibling threads : 0
# sibling threads : 1
# sibling threads : 2
# sibling threads : 3
# node0 meminfo : total = 8320608 kB, free = 7571024 kB
# node0 cpu list : 0-3
# ========
#
...
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/20110930134040.GA5575@quad
Signed-off-by: Stephane Eranian <eranian@google.com>
[ committer notes: Use --show-info in the tools as was in the docs, rename
perf_header_fprintf_info to perf_file_section__fprintf_info, fixup
conflict with f69b64f7 "perf: Support setting the disassembler style" ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This allows passing a timer to be run periodically, which will update
the hists tree that then gers refreshed on the screen, just like the
Live mode (symbol entries, annotation) we already have in 'perf top
--tui'.
Will be used by the new hist_entry/hists based 'top' tool.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-2r44qd8oe4sagzcgoikl8qzc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Just like --show-nr-samples, to help in diagnosing problems in the
tools.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-1lr7ejdjfvy2uwy2wkmatcpq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can reuse hists__fprintf for in the new perf top tool.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-huazw48x05h8r9niz5cf63za@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In the past we tried to avoid printing the name of the event when just
one event was found in the perf.data file, after some refactorings it
ended up not printing the event name if just one hist_entry was found in
one of the events.
Fix it by always printing the name of the event, even if just one is
found.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-kikr0c7ou55bd9caok8569rf@git.kernel.org
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add -M option to report/annotate to pass directly to objdump. This
allows to use -M intel for intel style disassembler syntax, which is
useful for people who are very used to the Intel syntax.
Link: http://lkml.kernel.org/r/1316122302-24306-2-git-send-email-andi@firstfloor.org
[committer note: Add missing Documentation bits, fixup conflicts with 3e6a2a7]
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we get a proper warning in the TUI in cases like:
$ perf report --stdio -g fractal,0.5,caller --sort pid
Selected -g but no callchain data. Did you call 'perf record' without -g?
$
The --stdio case is ok because it uses fprintf, ui__warning is needed to
figure out if --stdio or --tui is being used.
Cc: Arun Sharma <asharma@fb.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sam Liao <phyomh@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ag9fz2wd17mbbfjsbznq1wms@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add an option to perf report/annotate/script to specify which
CPUs to operate on. This enables us to take a single system wide
profile and analyse each CPU (or group of CPUs) in isolation.
This was useful when profiling a multiprocess workload where the
bottleneck was on one CPU but this was hidden in the overall
profile. Per process and per thread breakdowns didn't help
because multiple processes were running on each CPU and no
single process consumed an entire CPU.
The patch converts the list of CPUs returned by cpu_map__new
into a bitmap for fast lookup. I wanted to use -C to be
consistent with perf top/record/stat, but unfortunately perf
report already uses -C <comms>.
v2: Incorporate suggestions from David Ahern:
- Added -c to perf script
- Check that SAMPLE_CPU is set when -c is used
- Update documentation
v3: Create perf_session__cpu_bitmap()
Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Link: http://lkml.kernel.org/r/20110704215750.11647eb9@kryten
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add "caller/callee" option to support inverted butterfly report,
in the inverted report (with caller option), the call graph start
from the callee's ancestor. Users can use such view to catch system's
performance bottleneck from a sysprof like view. Using this option
with specified sort order like pid gives us high level view of call
graph statistics.
Also add "-G" alias for inverted call graph.
Signed-off-by: Sam Liao <phyomh@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Perf uses /proc/modules to figure out where kernel modules are loaded.
With the advent of kptr_restrict, non root users get zeroes for all module
start addresses.
So check if kptr_restrict is non zero and don't generate the syntethic
PERF_RECORD_MMAP events for them.
Warn the user about it in perf record and in perf report.
In perf report the reference relocation symbol being zero means that
kptr_restrict was set, thus /proc/kallsyms has only zeroed addresses, so don't
use it to fixup symbol addresses when using a valid kallsyms (in the buildid
cache) or vmlinux (in the vmlinux path) build-id located automatically or
specified by the user.
Provide an explanation about it in 'perf report' if kernel samples were taken,
checking if a suitable vmlinux or kallsyms was found/specified.
Restricted /proc/kallsyms don't go to the buildid cache anymore.
Example:
[acme@emilia ~]$ perf record -F 100000 sleep 1
WARNING: Kernel address maps (/proc/{kallsyms,modules}) are restricted, check
/proc/sys/kernel/kptr_restrict.
Samples in kernel functions may not be resolved if a suitable vmlinux file is
not found in the buildid cache or in the vmlinux path.
Samples in kernel modules won't be resolved at all.
If some relocation was applied (e.g. kexec) symbols may be misresolved even
with a suitable vmlinux or kallsyms file.
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.005 MB perf.data (~231 samples) ]
[acme@emilia ~]$
[acme@emilia ~]$ perf report --stdio
Kernel address maps (/proc/{kallsyms,modules}) were restricted,
check /proc/sys/kernel/kptr_restrict before running 'perf record'.
If some relocation was applied (e.g. kexec) symbols may be misresolved.
Samples in kernel modules can't be resolved as well.
# Events: 13 cycles
#
# Overhead Command Shared Object Symbol
# ........ ....... ................. .....................
#
20.24% sleep [kernel.kallsyms] [k] page_fault
20.04% sleep [kernel.kallsyms] [k] filemap_fault
19.78% sleep [kernel.kallsyms] [k] __lru_cache_add
19.69% sleep ld-2.12.so [.] memcpy
14.71% sleep [kernel.kallsyms] [k] dput
4.70% sleep [kernel.kallsyms] [k] flush_signal_handlers
0.73% sleep [kernel.kallsyms] [k] perf_event_comm
0.11% sleep [kernel.kallsyms] [k] native_write_msr_safe
#
# (For a higher level overview, try: perf report --sort comm,dso)
#
[acme@emilia ~]$
This is because it found a suitable vmlinux (build-id checked) in
/lib/modules/2.6.39-rc7+/build/vmlinux (use -v in perf report to see the long
file name).
If we remove that file from the vmlinux path:
[root@emilia ~]# mv /lib/modules/2.6.39-rc7+/build/vmlinux \
/lib/modules/2.6.39-rc7+/build/vmlinux.OFF
[acme@emilia ~]$ perf report --stdio
[kernel.kallsyms] with build id 57298cdbe0131f6871667ec0eaab4804dcf6f562
not found, continuing without symbols
Kernel address maps (/proc/{kallsyms,modules}) were restricted, check
/proc/sys/kernel/kptr_restrict before running 'perf record'.
As no suitable kallsyms nor vmlinux was found, kernel samples can't be
resolved.
Samples in kernel modules can't be resolved as well.
# Events: 13 cycles
#
# Overhead Command Shared Object Symbol
# ........ ....... ................. ......
#
80.31% sleep [kernel.kallsyms] [k] 0xffffffff8103425a
19.69% sleep ld-2.12.so [.] memcpy
#
# (For a higher level overview, try: perf report --sort comm,dso)
#
[acme@emilia ~]$
Reported-by: Stephane Eranian <eranian@google.com>
Suggested-by: David Miller <davem@davemloft.net>
Cc: Dave Jones <davej@redhat.com>
Cc: David Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Kees Cook <kees.cook@canonical.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Link: http://lkml.kernel.org/n/tip-mt512joaxxbhhp1odop04yit@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Resolving the sample->id to an evsel since the most advanced tools,
report and annotate, and the others will too when they evolve to
properly support multi-event perf.data files.
Good also because it does an extra validation, checking that the ID is
valid when present. When that is not the case, the overhead is just a
branch + function call (perf_evlist__id2evsel).
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can reuse things like the id to attr lookup routine
(perf_evlist__id2evsel) that uses a hash table instead of the linear
lookup done in the older perf_header_attr routines, etc.
Also to make evsels/evlist more pervasive an API, simplyfing using the
emerging perf lib.
cc: Arun Sharma <arun@sharma-home.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When multiple events were used in 'perf record', allow the user to
choose which one is wanted before showing the per event histograms.
Annotations will be performed on the chosen event.
Allow going back and forth from event to event quickly using just the
arrow keys and enter.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: William Cohen <wcohen@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
By creating an perf_evlist out of the attributes in the perf.data file
header, so that we can use evlists and evsels when reading recorded
sessions in addition to when we record sessions.
More work is needed to allow tools to allow the user to select which
events are wanted when browsing sessions, be it just one or a subset of
them, aggregated or showed at the same time but with different
indications on the UI to allow seeing workloads thru different views at
the same time.
But the overall goal/trend is to more uniformly use evsels and evlists.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
[root@emilia ~]# perf report --stdio
The perf.data file has no samples!
[root@emilia ~]#
The TUI shows a popup warning message with the same message.
Reported-by: Ingo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We only allocate it when in TUI mode. In --stdio mode unconditionally
initializing this area leads to memory corruption.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since we'll need it when implementing the live annotate TUI browser.
This also simplifies things a bit by having the list head for the source
code to be in the dynamicly allocated part of struct annotation, that
way we don't have to pass it around, it can be found from the struct
symbol that is passed everywhere.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf annotate tool continues aggregating everything on just one
histograms, but to support the top model add support for one histogram
perf evsel in the evlist.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
They will be used by perf top, so that we have just one set of routines
to do annotation.
Rename "struct sym_priv" to "struct annotation", etc, to clarify this
code a bit.
Rename "struct sym_ext" to "struct source_line", to give it a meaningful
name, that clarifies that it is a the result of an addr2line call, that
is sorted by percentage one particular source code line appeared in the
annotation.
And since we're moving things around also rename 'sym_hist->ip' to
'sym_hist->addr' as we want to do data structure annotation at some
point.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Because in tools like 'top' we don't want the pager.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And move the event_t methods to the perf_event__ too.
No code changes, just namespace consistency.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To make the callchain API naming more consistent.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1294977121-5700-4-git-send-email-fweisbec@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The callchains are fed with an array of a fixed size.
As a result we iterate over each callchains three times:
- 1st to resolve symbols
- 2nd to filter out context boundaries
- 3rd for the insertion into the tree
This also involves some pairs of memory allocation/deallocation
everytime we insert a callchain, for the filtered out array of
addresses and for the array of symbols that comes along.
Instead, feed the callchains through a linked list with persistent
allocations. It brings several pros like:
- Merge the 1st and 2nd iterations in one. That was possible before
but in a way that would involve allocating an array slightly taller
than necessary because we don't know in advance the number of context
boundaries to filter out.
- Much lesser allocations/deallocations. The linked list keeps
persistent empty entries for the next usages and is extendable at
will.
- Makes it easier for multiple sources of callchains to feed a
stacktrace together. This is deemed to pave the way for cfi based
callchains wherein traditional frame pointer based kernel
stacktraces will precede cfi based user ones, producing an overall
callchain which size is hardly predictable. This requirement
makes the static array obsolete and makes a linked list based
iterator a much more flexible fit.
Basic testing on a big perf file containing callchains (~ 176 MB)
has shown a throughput gain of about 11% with perf report.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1294977121-5700-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using %L[uxd] has issues in some architectures, like on ppc64. Fix it
by making our 64 bit integers typedefs of stdint.h types and using
PRI[ux]64 like, for instance, git does.
Reported by Denis Kirjanov that provided a patch for one case, I went
and changed all cases.
Reported-by: Denis Kirjanov <dkirjanov@kernel.org>
Tested-by: Denis Kirjanov <dkirjanov@kernel.org>
LKML-Reference: <20110120093246.GA8031@hera.kernel.org>
Cc: Denis Kirjanov <dkirjanov@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pingtian Han <phan@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The symfs argument allows analysis of perf.data file using a locally accessible
filesystem tree with debug symbols - e.g., tree created during image builds,
sshfs mount, loop mounted KVM disk images, USB keys, initrds, etc. Anything
with an OS tree can be analyzed from anywhere without the need to populate a
local data store with build-ids.
Commiter notes:
o Fixed up symfs="/" variants handling.
o prefixed DSO__ORIG_GUEST_KMODULE case with symfs too, avoiding use of files
outside the symfs directory.
LKML-Reference: <1291926427-28846-1-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If we are running the new perf on an old kernel without support for
sample_id_all, we should fall back to the old unordered processing of
events. If we didn't than we would *always* process events without
timestamps out of order, whether or not we hit a reordering race. In
other words, instead of there being a chance of not attributing samples
correctly, we would guarantee that samples would not be attributed.
While processing all events without timestamps before events with
timestamps may seem like an intuitive solution, it falls down as
PERF_RECORD_EXIT events would also be processed before any samples.
Even with a workaround for that case, samples before/after an exec would
not be attributed correctly.
This patch allows commands to indicate whether they need to fall back to
unordered processing, so that commands that do not care about timestamps
on every event will not be affected. If we do fallback, this will print
out a warning if report -D was invoked.
This patch adds the test in perf_session__new so that we only need to
test once per session. Commands that do not use an event_ops (such as
record and top) can simply pass NULL in it's place.
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1291951882-sup-6069@au1.ibm.com>
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is useful for analyzing a perf data file on a different system than
the one data was collected on and still include symbols from loaded
kernel modules in the output.
Commiter note: Updated the man page accordingly.
LKML-Reference: <1291775986-16475-1-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
At perf_session__process_event, so that we reduce the number of lines in eache
tool sample processing routine that now receives a sample_data pointer already
parsed.
This will also be useful in the next patch, where we'll allow sample the
identity fields in MMAP, FORK, EXIT, etc, when it will be possible to see (cpu,
timestamp) just after before every event.
Also validate callchains in perf_session__process_event, i.e. as early as
possible, and keep a counter of the number of events discarded due to invalid
callchains, warning the user about it if it happens.
There is an assumption that was kept that all events have the same sample_type,
that will be dealt with in the future, when this preexisting limitation will be
removed.
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ian Munsie <imunsie@au1.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <1291318772-30880-4-git-send-email-acme@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Do that to start a consistant callchain API namespace.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Christoph Hellwig <hch@infradead.org>
Relying just on ~/.perfconfig or rebuilding the tool disabling support
for the TUI is too cumbersome, so allow specifying which UI to use and
make the command line switch override whatever is in ~/.perfconfig.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When cmd_record exits the whole perf binary will exit right after,
so no need to traverse lots of complex data structures freeing them.
Sticked a comment for leak detectives and for a experiment with obstacks
to be performed so that we can speed up freeing that memory.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Only in verbose mode so as not to bloat struct symbol too much.
The key used is '/', just like in vi, less, etc.
More work is needed to allocate space on the symbol in a more clear way.
This experiment shows how to do it for the hist_browser, in the main
window.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tidy-up patch to remove some code and struct perf_session data members
which are no longer needed due to the previous patch: "perf tools: Don't
abbreviate file paths relative to the cwd".
LKML-Reference: <new-submission>
Signed-off-by: Dave Martin <dave.martin@linaro.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Hists have their hits increased by the event period. And this
period based counting is the foundation of all the stats in
perf report.
But callchains still use the raw number of hits, without taking
the period into account. So when we compute the percentage,
absolute based percentages are totally broken, and relative ones
too in the first parent level. Because we pass the number of events
muliplied by their period as the total number of hits to the
callchain filtering, while callchains expect this number to be
the number of raw hits.
perf report -g graph was simply not working, showing no graph unless
the min percent was zero. And even there the percentage of the
branches was always 0. And may be fractal filtering was broken on
the first branch level too.
flat also was broken, but it was hidden because of other breakages.
Anyway fix this by counting using periods on callchains.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Simplifying the tools that were using both in sequence and allowing
upcoming simplifications, such as Arun's patch to sort by cpus.
Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is useful to know on which CPU a sample was captured on.
The information is captured with perf record -R but it was
not printed out by perf report -D. This patch adds this.
When -R is not used, cpu is set to -1to indicate that
the CPU is unknown (it is not captured).
Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4bff964c.e88cd80a.3106.7d31@mx.google.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The hists__tty_browse_tree function was created with the loop to print
all events, and its equivalent, hists__tui_browse_tree, was created in a
similar fashion, where it is possible to switch among the multiple
events, if present, using TAB to go the next event, and shift+TAB
(UNTAB) to go to the previous.
The report TUI now shows as the window title the name of the event and a
leak was fixed wrt pstacks.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using the same scheme as for git's/perf's pager setup, i.e. if one
doesn't want to, on a newt enabled perf binary, to disable the TUI for
'perf report', its just a matter of doing:
[root@doppio linux-2.6-tip]# printf "[tui]\n\nreport = off\n" >
/root/.perfconfig
[root@doppio linux-2.6-tip]# cat /root/.perfconfig
[tui]
report = off
[root@doppio linux-2.6-tip]#
System wide settings are also possible, by editing /etc/perfconfig, etc,
i.e. the git machinery for config files applies to perf as well, so when
in doubt where to put your settings, consult the git documentation, if
it fails, please let us know.
Suggested-by: Ingo Molnar <mingo@elte.hu>
Discussed-with: Stephane Eranian <eranian@google.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
OPT_SET_INT was renamed to OPT_SET_UINT since the only use in these
tools is to set something that has an enum type, that is builtin
compatible with unsigned int.
Several string constifications were done to make OPT_STRING require a
const char * type.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Number of samples is meaningless after we switched to auto-freq, so
report the number of events, i.e. not the sum of the different periods,
but the number PERF_RECORD_SAMPLE emitted by the kernel.
While doing this I noticed that naming "count" to the sum of all the
event periods can be confusing, so rename it to .period, just like in
struct sample.data, so that we become more consistent.
This helps with the next step, that was to record in struct hist_entry
the number of sample events for each instance, we need that because we
use it to generate the number of events when applying filters to the
tree of hist entries like it is being done in the TUI report browser.
Suggested-by: Ingo Molnar <mingo@elte.hu>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The events_stats.total field is too generic, rename it to .total_period,
and also add a comment explaining that it is the sum of all the .period
fields in samples, that is needed because we use auto-freq to avoid
sampling artifacts.
Ditto for events_stats.lost, that is the sum of all lost_event.lost
fields, i.e. the number of events the kernel dropped.
Looking at the users, builtin-sched.c can make use of these fields and
stop doing it again.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is one more thing that started global but are more useful per hist
or per session.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now we don't anymore use popen to run 'perf annotate' for the selected
symbol, instead we collect per address samplings when processing samples
in 'perf report' if we're using the newt browser, then we use this data
directly to do annotation.
Done this way we can actually traverse the objdump_line objects
directly, matching the addresses to the collected samples and colouring
them appropriately using lower level slang routines.
The new ui_browser class will be reused for the main, callchain aware,
histogram browser, when it will be made generic and don't assume that
the objects are always instances of the objdump_line class maintained
using list_heads.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Those are really not specific to the newt code, can be used by other UI
frontends.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Better done when we are adding entries, be it initially of when we're
re-sorting the histograms.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In cbbc79a we introduced support for multiple events by introducing a
new "event_stat_id" struct and then made several perf_session methods
receive a point to it instead of a pointer to perf_session, and kept the
event_stats and hists rb_tree in perf_session.
While working on the new newt based browser, I realised that it would be
better to introduce a new class, "hists" (short for "histograms"),
renaming the "event_stat_id" struct and the perf_session methods that
were really "hists" methods, as they manipulate only struct hists
members, not touching anything in the other perf_session members.
Other optimizations, such as calculating the maximum lenght of a symbol
name present in an hists instance will be possible as we add them,
avoiding a re-traversal just for finding that information.
The rationale for the name "hists" to replace "event_stat_id" is that we
may have multiple sets of hists for the same event_stat id, as, for
instance, the 'perf diff' tool has, so event stat id is not what
characterizes what this struct and the functions that manipulate it do.
Cc: Eric B Munson <ebmunson@us.ibm.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Works by adding a third parameter to the '-g' argument, after the graph
type and minimum percentage, for example:
[root@doppio linux-2.6-tip]# perf report -g fractal,0.5,2
Will show only the first two symbols where at least 0.5% of the samples
took place.
All the other symbols that don't fall outside these constraints will be
put together in the last entry, prefixed with "[...]" and the total
percentage for them.
Suggested-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And with that fix at least one bug:
The first hit for an entry, the one that calls malloc to create a new
instance in __perf_session__add_hist_entry, wasn't adding the count to
the per cpumode (PERF_RECORD_MISC_USER, etc) total variable.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch improves 'perf report -h' output for the
'--call-graph' command line option by enumerating the
different output types.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1273332783-4268-1-git-send-email-penberg@cs.helsinki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Currently, perf 'live mode' writes build-ids at the end of the
session, which isn't actually useful for processing live mode events.
What would be better would be to have the build-ids sent before any of
the samples that reference them, which can be done by processing the
event stream and retrieving the build-ids on the first hit. Doing
that in perf-record itself, however, is off-limits.
This patch introduces perf-inject, which does the same job while
leaving perf-record untouched. Normal mode perf still records the
build-ids at the end of the session as it should, but for live mode,
perf-inject can be injected in between the record and report steps
e.g.:
perf record -o - ./hackbench 10 | perf inject -v -b | perf report -v -i -
perf-inject reads a perf-record event stream and repipes it to stdout.
At any point the processing code can inject other events into the
event stream - in this case build-ids (-b option) are read and
injected as needed into the event stream.
Build-ids are just the first user of perf-inject - potentially
anything that needs userspace processing to augment the trace stream
with additional information could make use of this facility.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1272696080-16435-3-git-send-email-tzanussi@gmail.com>
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now those methods don't operate on a global list of dsos, but on lists
of machines, so make this clear by renaming the functions.
Cc: Avi Kivity <avi@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zhang, Yanmin <yanmin_zhang@linux.intel.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
struct kernel_info and kerninfo__ are too vague, what they really
describe are machines, virtual ones or hosts.
There are more changes to introduce helpers to shorten function calls
and to make more clear what is really being done, but I left that for
subsequent patches.
Cc: Avi Kivity <avi@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Zhang, Yanmin <yanmin_zhang@linux.intel.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Bypasses the build_id perf header code and replaces it with a
synthesized event and processing function that accomplishes the
same thing, used when reading/writing perf data to/from a pipe.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: k-keiichi@bx.jp.nec.com
Cc: acme@ghostprotocols.net
LKML-Reference: <1270184365-8281-9-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Bypasses the tracing_data perf header code and replaces it with
a synthesized event and processing function that accomplishes
the same thing, used when reading/writing perf data to/from a
pipe.
The tracing data is pretty large, and this patch doesn't attempt
to break it down into component events. The tracing_data event
itself doesn't actually contain the tracing data, rather it
arranges for the event processing code to skip over it after
it's read, using the skip return value added to the event
processing loop in a previous patch.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: k-keiichi@bx.jp.nec.com
Cc: acme@ghostprotocols.net
LKML-Reference: <1270184365-8281-8-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Bypasses the event type perf header code and replaces it with a
synthesized event and processing function that accomplishes the
same thing, used when reading/writing perf data to/from a pipe.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: k-keiichi@bx.jp.nec.com
Cc: acme@ghostprotocols.net
LKML-Reference: <1270184365-8281-7-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Bypasses the attr perf header code and replaces it with a
synthesized event and processing function that accomplishes the
same thing, used when reading/writing perf data to/from a pipe.
Making the attrs into events allows them to be streamed over a
pipe along with the rest of the header data (in later patches).
It also paves the way to allowing events to be added and removed
from perf sessions dynamically.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: k-keiichi@bx.jp.nec.com
Cc: acme@ghostprotocols.net
LKML-Reference: <1270184365-8281-6-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Adds special treatment for stdin - if the user specifies '-i -'
to perf report, the intent is that the event stream be written
to stdin rather than from a disk file.
The actual handling of the '-' filename is done by the session;
this just adds a signal handler to stop reporting, and turns off
interference by the pager.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: k-keiichi@bx.jp.nec.com
Cc: acme@ghostprotocols.net
LKML-Reference: <1270184365-8281-4-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Parsing an option from the command line with OPT_BOOLEAN on a
bool data type would not work on a big-endian machine due to the
manner in which the boolean was being cast into an int and
incremented. For example, running 'perf probe --list' on a
PowerPC machine would fail to properly set the list_events bool
and would therefore print out the usage information and
terminate.
This patch makes OPT_BOOLEAN work as expected with a bool
datatype. For cases where the original OPT_BOOLEAN was
intentionally being used to increment an int each time it was
passed in on the command line, this patch introduces OPT_INCR
with the old behaviour of OPT_BOOLEAN (the verbose variable is
currently the only such example of this).
I have reviewed every use of OPT_BOOLEAN to verify that a true
C99 bool was passed. Where integers were used, I verified that
they were only being used for boolean logic and changed them to
bools to ensure that they would not be mistakenly used as ints.
The major exception was the verbose variable which now uses
OPT_INCR instead of OPT_BOOLEAN.
Signed-off-by: Ian Munsie <imunsie@au.ibm.com>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: <stable@kernel.org> # NOTE: wont apply to .3[34].x cleanly, please backport
Cc: Git development list <git@vger.kernel.org>
Cc: Ian Munsie <imunsie@au1.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Eric B Munson <ebmunson@us.ibm.com>
Cc: Valdis.Kletnieks@vt.edu
Cc: WANG Cong <amwang@redhat.com>
Cc: Thiago Farina <tfransosi@gmail.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Anton Blanchard <anton@samba.org>
Cc: John Kacur <jkacur@redhat.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1271147857-11604-1-git-send-email-imunsie@au.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
So that it can use it in the 'perf annotate' command line, otherwise
it'll use the default and not the specified -i filename passed to 'perf
report'.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Return NULL instead and make the caller propagate the error.
LKML-Reference: <new-submission>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The struct callchain_node size is 120 bytes, that are never used when
there are no callchains or '-g none' is specified, so conditionally
allocate it, reducing sizeof(struct hist_entry) from 210 bytes to only
96, greatly speeding the non-callchain processing.
LKML-Reference: <new-submission>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For when we are processing the events and inserting the entries in the
browser.
Experimentation here: naming "ui_something" we may be treading into
creating a TUI/GUI set of routines that can then be implemented in terms
of multiple backends.
Also the time it takes for adding things to the "browser" takes, visually
(I guess I should do some profiling here ;-) ), more time than for
processing the events...
That means we probably need to create a custom hist_entry browser, so
that we reuse the structures we have in place instead of duplicating
them in newt.
But progress was made and at least we can see something while long files
are being loaded, that must be one of UI 101 bullet points :-)
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need this to know where a symbol in a callchain came from,
for various reasons, among them precise annotation from a
TUI/GUI tool.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1269459619-982-5-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Callchains have markers inside their capture to tell we
enter a context (kernel, user, ...).
Those are not displayed in the callchains but they are
incidentally an active part of the radix tree where
callchains are stored, just like any other address.
If we have the two following callchains:
addr1 -> addr2 -> user context -> addr3
addr1 -> addr2 -> user context -> addr4
addr1 -> addr2 -> addr 5
This is pretty common if addr1 and addr2 are part of an
interrupt path, addr3 and addr4 are user addresses and
addr5 is a kernel non interrupt path.
This will be stored as follows in the tree:
addr1
addr2
/ \
/ addr5
user context
/ \
addr3 addr4
But we ignore the context markers in the report, hence
the addr3 and addr4 will appear as orphan branches:
|--28.30%-- hrtimer_interrupt
| smp_apic_timer_interrupt
| apic_timer_interrupt
| | <------------- here, no parent!
| | |
| | |--11.11%-- 0x7fae7bccb875
| | |
| | |--11.11%-- 0xffffffffff60013b
| | |
| | |--11.11%-- __pthread_mutex_lock_internal
| | |
| | |--11.11%-- __errno_location
Fix this by removing the context markers when we process the
callchains to the tree.
Reported-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1269274173-20328-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Newt has widespread availability and provides a rather simple
API as can be seen by the size of this patch.
The work needed to support it will benefit other frontends too.
In this initial patch it just checks if the output is a tty, if
not it falls back to the previous behaviour, also if
newt-devel/libnewt-dev is not installed the previous behaviour
is maintaned.
Pressing enter on a symbol will annotate it, ESC in the
annotation window will return to the report symbol list.
More work will be done to remove the special casing in
color_fprintf, stop using fmemopen/FILE in the printing of
hist_entries, etc.
Also the annotation doesn't need to be done via spawning "perf
annotate" and then browsing its output, we can do better by
calling directly the builtin-annotate.c functions, that would
then be moved to tools/perf/util/annotate.c and shared with perf
top, etc
But lets go by baby steps, this patch already improves perf
usability by allowing to quickly do annotations on symbols from
the report screen and provides a first experimentation with
libnewt/TUI integration of tools.
Tested on RHEL5 and Fedora12 X86_64 and on Debian PARISC64 to
browse a perf.data file collected on a Fedora12 x86_64 box.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1268349164-5822-5-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Perf report does not handle multiple events being reported, even
though perf record stores them properly on disk. This patch
addresses that issue by adding the logic to perf report to use
the event stream id that is saved by record and the new data
structures to seperate the event streams and report them
individually.
Signed-off-by: Eric B Munson <ebmunson@us.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1267804269-22660-6-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Now that report can store historgrams for multiple events we
need to be able to do the post processing work for each
histogram. This patch changes the post processing functions so
that they can be called individually for each event's histogram.
Signed-off-by: Eric B Munson <ebmunson@us.ibm.com>
[ Guarantee bisectabilty by fixing up builtin-report.c ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1267804269-22660-5-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In order to minimize the impact of storing multiple events in a
report this function will now take the root of the histogram
tree so that the logic for selecting the proper tree can be
inserted before the call.
Signed-off-by: Eric B Munson <ebmunson@us.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1267804269-22660-3-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Since they can come from another architecture with bigger
pointers, i.e. processing a 64-bit perf.data on a 32-bit arch.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1263478990-8200-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
To avoid the funny:
[root@doppio ~]# perf record -a -f sleep 2s
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.334 MB perf.data (~14572 samples) ]
[root@doppio ~]# perf report --no-call-graph
selected -g but no callchain data. Did you call perf record without -g?
And fix the bug reported by peterz when we do indeed record with
callchains and then ask for a report without:
[root@doppio ~]# perf record -a -g -f sleep 2s
[root@doppio ~]# perf report --no-call-graph
Segmentation fault
[root@doppio ~]#
Reported-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1262699685-27820-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Useful to match the 'overhead' column in 'perf report' with the
'baseline' one in 'perf diff'.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1262047716-23171-3-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Since now all that we have are perf event handlers, leave just
the name of the event.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1261957026-15580-9-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Now perf_event_ops has just that, event handlers.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1261957026-15580-8-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This is really something tools need to do before asking for the
events to be processed, leaving perf_session__process_events to
do just that, process events.
Also add a msg parameter to perf_session__has_traces() so that
the right message can be printed, fixing a regression added by
me in the previous cset (right timechart message) and also
fixing 'perf kmem', that was not asking if 'perf kmem record'
was ran.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1261957026-15580-6-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fixing this:
[acme@doppio linux-2.6-tip]$ perf diff --hell
Error: unknown option `hell'
usage: perf diff [<options>] [old_file] [new_file]
Segmentation fault
[acme@doppio linux-2.6-tip]$
Also go over the other such arrays to check if they all were OK,
they are, but there were some minor changes to do like making
one static and renaming another to match the command it refers
to.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1261161358-23959-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
That means that almost everything you can do with 'perf report'
can be done with 'perf diff', for instance:
$ perf record -f find / > /dev/null
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.062 MB perf.data (~2699
samples) ] $ perf record -f find / > /dev/null
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.062 MB perf.data (~2687
samples) ] perf diff | head -8
9.02% +1.00% find libc-2.10.1.so [.] _IO_vfprintf_internal
2.91% -1.00% find [kernel] [k] __kmalloc
2.85% -1.00% find [kernel] [k] ext4_htree_store_dirent
1.99% -1.00% find [kernel] [k] _atomic_dec_and_lock
2.44% find [kernel] [k] half_md4_transform
$
So if you want to zoom into libc:
$ perf diff --dsos libc-2.10.1.so | head -8
37.34% find [.] _IO_vfprintf_internal
10.34% find [.] __GI_memmove
8.25% +2.00% find [.] _int_malloc
5.07% -1.00% find [.] __GI_mempcpy
7.62% +2.00% find [.] _int_free
$
And if there were multiple commands using libc, it is also
possible to aggregate them all by using --sort symbol:
$ perf diff --dsos libc-2.10.1.so --sort symbol | head -8
37.34% [.] _IO_vfprintf_internal
10.34% [.] __GI_memmove
8.25% +2.00% [.] _int_malloc
5.07% -1.00% [.] __GI_mempcpy
7.62% +2.00% [.] _int_free
$
The displacement column now is off by default, to use it:
perf diff -m --dsos libc-2.10.1.so --sort symbol | head -8
37.34% [.] _IO_vfprintf_internal
10.34% [.] __GI_memmove
8.25% +2.00% [.] _int_malloc
5.07% -1.00% +2 [.] __GI_mempcpy
7.62% +2.00% -1 [.] _int_free
$
Using -t/--field-separator can be used for scripting:
$ perf diff -t, -m --dsos libc-2.10.1.so --sort symbol | head -8
37.34, , ,[.] _IO_vfprintf_internal
10.34, , ,[.] __GI_memmove
8.25,+2.00%, ,[.] _int_malloc
5.07,-1.00%, +2,[.] __GI_mempcpy
7.62,+2.00%, -1,[.] _int_free
6.99,+1.00%, -1,[.] _IO_new_file_xsputn
1.89,-2.00%, +4,[.] __readdir64
$
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260978567-550-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Those don't make sense for tools such as 'perf diff'.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260973631-28035-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Will be used in other tools such as 'perf diff'.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260973631-28035-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Pull it out of builtin-report - further changes will be made and it
will then be reusable in 'perf diff' as well.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260914682-29652-4-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Will be used in perf diff too.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260914682-29652-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This simplifies a lot of functions, less stuff to be done by
tool writers.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260914682-29652-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
perf top, report and annotate all define their own symbol_conf,
it should be static.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260843322-6602-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
And it is also needed by 'perf diff'.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260828571-3613-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
All tools had copies, and perf diff would have to specify a
sample_type_check method just for copying it.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260807780-19377-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This is really a generic library routine, so declutter
builtin-report.c a bit by moving it to the library.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260807780-19377-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
As we'll need to sort multiple times for multiple perf sessions,
so that we can then do a diff.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260803439-16783-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
All hist entries are in only one of them, so use just one and a
temporary rb_root while sorting/collapsing.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260797831-11220-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
There is still some more work to do to disentangle map creation
from DSO loading, but this happens only for the kernel, and for
the early adopters of perf diff, where this disentanglement
matters most, we'll be testing different kernels, so no problem
here.
Further clarification: right now we create the kernel maps for
the various modules and discontiguous kernel text maps when
loading the DSO, we should do it as a two step process, first
creating the maps, for multiple mappings with the same DSO
store, then doing the dso load just once, for the first hit on
one of the maps sharing this DSO backing store.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260741029-4430-6-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
So that we can process two perf.data files.
We still need to add a O_MMAP mode for perf_session so that we
can do all the mmap stuff in it.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260741029-4430-5-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
By having the cwd/cwdlen in the perf_session struct and
full_paths in perf_event_ops.
Now its just a matter of passing the ops.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260741029-4430-4-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
No need for all tools to register it and then immediately call
perf_session__process_events.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260741029-4430-3-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Pass the event_ops to perf_session__process_events instead.
Also move the event_ops definition to session.h, starting to
move things around to their right place, trimming the many
unneeded headers we have.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260741029-4430-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
They will need it to get the right threads list, etc.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260741029-4430-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
That does all the initialization boilerplate, opening the file,
reading the header, checking if it is valid, etc.
And that will as well have the threads list, kmap (now) global
variable, etc, so that we can handle two (or more) perf.data files
describing sessions to compare.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260573842-19720-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Currently, sample event data is parsed for each commands, and it
is assuming that the data is not including other data. (E.g.
timechart, trace, etc. can't parse the event if it has
PERF_SAMPLE_CALLCHAIN)
So, even if we record the superset data for multiple commands at
a time, commands can't parse. etc.
To fix it, this makes common sample event parser, and use it to
parse sample event correctly. (PERF_SAMPLE_READ is unsupported
for now though, it seems to be not using.)
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <87hbs48imv.fsf@devron.myhome.or.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Now we have a very high level routine for simple tools to
process IP sample events:
int event__preprocess_sample(const event_t *self,
struct addr_location *al,
symbol_filter_t filter)
It receives the event itself and will insert new threads in the
global threads list and resolve the map and symbol, filling all
this info into the new addr_location struct, so that tools like
annotate and report can further process the event by creating
hist_entries in their specific way (with or without callgraphs,
etc).
It in turn uses the new next layer function:
void thread__find_addr_location(struct thread *self, u8 cpumode,
enum map_type type, u64 addr,
struct addr_location *al,
symbol_filter_t filter)
This one will, given a thread (userspace or the kernel kthread
one), will find the given type (MAP__FUNCTION now, MAP__VARIABLE
too in the near future) at the given cpumode, taking vdsos into
account (userspace hit, but kernel symbol) and will fill all
these details in the addr_location given.
Tools that need a more compact API for plain function
resolution, like 'kmem', can use this other one:
struct symbol *thread__find_function(struct thread *self, u64 addr,
symbol_filter_t filter)
So, to resolve a kernel symbol, that is all the 'kmem' tool
needs, its just a matter of calling:
sym = thread__find_function(kthread, addr, NULL);
The 'filter' parameter is needed because we do lazy
parsing/loading of ELF symtabs or /proc/kallsyms.
With this we remove more code duplication all around, which is
always good, huh? :-)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1259346563-12568-12-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
While implementing event__preprocess_sample, that will do all of
the symbol lookup in one convenient function, I noticed that
util/process_event.[ch] were not being used at all, then started
looking if there were other functions that could be shared
and...
All those functions really don't need to receive offset + head,
the only thing they did was common to all of them, so do it at
one place instead.
Stats about number of each type of event processed now is done
in a central place.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1259346563-12568-11-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Making the routines that were so far specific to the kernel maps
useful for all threads.
This is done by making the kernel maps be contained in a kernel
"thread".
This gets the kernel specific routines closer to the userspace
counterparts, which will help in reducing the boilerplate for
resolving a symbol, as will be demonstrated in the next patches.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1259346563-12568-9-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
By using an array of rb_roots in struct dso we can, from a
struct map instance to get the right symbol rb_tree more easily.
This way we can have just one symbol lookup method for struct
map instances, map__find_symbol, instead of one per symtab type
(functions, variables).
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1259346563-12568-6-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Paving the way for supporting variable in adition to function
symbols.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1259074912-5924-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
And also express its configuration toggles via a struct.
Now all one has to do is to call symbol__init(NULL) if the
defaults are OK, or pass a struct symbol_conf pointer with the
desired configuration.
If a tool uses kernel_maps__find_symbol() to look at the kernel
and modules mappings for a symbol but didn't call symbol__init()
first, that will generate a one time warning too, alerting the
subcommand developer that symbol__init() must be called.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1259071517-3242-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Prevent bit-rot in perf-annotate by using common functions where
possible. Here we create process_events.[ch] to hold the common
functions.
Signed-off-by: John Kacur <jkacur@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: acme@redhat.com
LKML-Reference: <1259073301-11506-3-git-send-email-jkacur@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Now that we can check the buildid to see if it really matches,
this can be done safely:
vmlinux
/boot/vmlinux
/boot/vmlinux-<uts.release>
/lib/modules/<uts.release>/build/vmlinux
/usr/lib/debug/lib/modules/%s/vmlinux
More can be added - if you know about distros that put the
vmlinux somewhere else please let us know.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1259001550-8194-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Bug introduced in 439d473b47,
making the initial map be used for all IPs, so that symbols
outside this initial map would either be erroneously resolved or
not resolve at all.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258909162-28496-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Just like we do with the other DSOs. This also simplifies the
kernel_maps setup process, now all that the tools need to do is
to call kernel_maps__init and the maps for the modules and
kernel will be created, then, later, when
kernel_maps__find_symbol() is used, it will also call
maps__find_symbol that already checks if the symtab was loaded,
loading it if needed.
Now if one does 'perf top --hide_kernel_symbols' we won't pay
the price of loading the (many) symbols in /proc/kallsyms or
vmlinux.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258757489-5978-4-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It should just load kernel symbols, not load the list of
modules. There are more stuff to move to other routines, but
lets do it in several steps.
End goal is to be able to defer symbol table loading till we
find a hit for that map address range. So that the kernel &
modules are handled just like all the other DSOs in the system.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258757489-5978-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Before we were storing this in the DSO, but in fact this is a
property of the 'symbol' class, not something that will vary
among DSOs, so move it to a global variable and initialize it
using the existing symbol__init routine.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1256927305-4628-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
So that we can have a quicker start on perf top and even
speedups in the other tools, as we can have maps with no hits,
so no need to load its symtabs.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1256773881-4191-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We were using eprintf in some places, that looks at a global
'verbose' level, and at other places passing a 'v' parameter to
specify the verbosity level, unify it by introducing
pr_{err,warning,debug,etc}, just like in the kernel.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1256153646-10097-1-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Currently, the callchains are displayed using a constant left
margin. So depending on the current sort dimension
configuration, callchains may appear to be well attached to the
first sort dimension column field which is mostly the case,
except when the first dimension of sorting is done by comm,
because these are right aligned.
This patch binds the callchain to the first letter in the first
column, whatever type of column it is (dso, comm, symbol).
Before:
0.80% perf [k] __lock_acquire
__lock_acquire
lock_acquire
|
|--58.33%-- _spin_lock
| |
| |--28.57%-- inotify_should_send_event
| | fsnotify
| | __fsnotify_parent
After:
0.80% perf [k] __lock_acquire
__lock_acquire
lock_acquire
|
|--58.33%-- _spin_lock
| |
| |--28.57%-- inotify_should_send_event
| | fsnotify
| | __fsnotify_parent
Also, for clarity, we don't put anymore the callchain as is but:
- If we have a top level ancestor in the callchain, start it
with a first ascii hook.
Before:
0.80% perf [kernel] [k] __lock_acquire
__lock_acquire
lock_acquire
|
|--58.33%-- _spin_lock
| |
| |--28.57%-- inotify_should_send_event
| | fsnotify
[..] [..]
After:
0.80% perf [kernel] [k] __lock_acquire
|
--- __lock_acquire
lock_acquire
|
|--58.33%-- _spin_lock
| |
| |--28.57%-- inotify_should_send_event
| | fsnotify
[..] [..]
- Otherwise, if we have several top level ancestors, then
display these like we did before:
1.69% Xorg
|
|--21.21%-- vread_hpet
| 0x7fffd85b46fc
| 0x7fffd85b494d
| 0x7f4fafb4e54d
|
|--15.15%-- exaOffscreenAlloc
|
|--9.09%-- I830WaitLpRing
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
LKML-Reference: <1256246604-17156-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
While recursively printing the branches of each callchains, we
forget to display the root. It is never printed.
Say we have:
symbol
f1
f2
|
-------- f3
| f4
|
---------f5
f6
Actually we never see that, instead it displays:
symbol
|
--------- f3
| f4
|
--------- f5
f6
However f1 is always the same than "symbol" and if we are
sorting by symbols first then "symbol", f1 and f2 will be well
aligned like in the above example, so displaying f1 looks
redundant here.
But if we are sorting by something else first (dso, comm,
etc...), displaying f1 doesn't look redundant but rather
necessary because the symbol is not well aligned anymore with
its callchain:
comm dso symbol
f1
f2
|
--------- [...]
And we want the callchain to be obvious.
So we fix the bug by printing the root branch, but we also
filter its first entry if we are sorting by symbols first.
Reported-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1256246604-17156-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We have this sym_priv_size mechanism for attaching private areas
to struct symbol entries but annotate wasn't using it, adding
private areas to struct symbol in addition to a ->priv pointer.
Scrap all that and use the sym_priv_size mechanism.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1256055940-19511-1-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In each case, if the NULL test on thread is needed, then the
dereference should be after the NULL test.
A simplified version of the semantic match that detects this
problem is as follows (http://coccinelle.lip6.fr/):
// <smpl>
@match exists@
expression x, E;
identifier fld;
@@
* x->fld
... when != \(x = E\|&x\)
* x == NULL
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
LKML-Reference: <Pine.LNX.4.64.0910170842500.9213@ask.diku.dk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This was just being copy'n'pasted all over.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <20091013141629.GD21809@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Like printing every symbol created.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1254923340-4870-1-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This librarizes the perf.data file mapping and handling in various
perf tools, roughly reducing the amount of code and fixing the
places that mmap from beginning of the file whereas we want to mmap
from the beginning of the data, leading to page fault because the
mmap window is too small since the trace info are written in the
file too.
TODO:
- convert perf timechart too
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arjan van de Ven <arjan@infradead.org>
LKML-Reference: <20091007104729.GD5043@nowhere>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In resolve_symbol, as we're moving to breaking the kernel symbols
list per address ranges, i.e. kernel linking sections, so that we
don't have a big kernel_map that in its range covers what is in the
modules.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Now perf report and annotate do the callgraph/hit processing in
their specialized hist_entry__add functions.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Representing modules as struct map entries, backed by a DSO, etc,
using /proc/modules to find where the module is loaded.
DSOs now can have a short and long name, so that in verbose mode we
can show exactly which .ko or vmlinux image was used.
As kernel modules now are a DSO separate from the kernel, we can
ask for just the hits for a particular set of kernel modules, just
like we can do with shared libraries:
[root@doppio linux-2.6-tip]# perf report -n --vmlinux
/home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15
84.58% 13266 Xorg [k] drm_clflush_pages
4.02% 630 Xorg [k] trace_kmalloc.clone.0
3.95% 619 Xorg [k] drm_ioctl
2.07% 324 Xorg [k] drm_addbufs
1.68% 263 Xorg [k] drm_gem_close_ioctl
0.77% 120 Xorg [k] drm_setmaster_ioctl
0.70% 110 Xorg [k] drm_lastclose
0.68% 106 Xorg [k] drm_open
0.54% 85 Xorg [k] drm_mm_search_free
[root@doppio linux-2.6-tip]#
Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko
would have the same effect. Allowing specifying just 'drm.ko' is left
for another patch.
Processing kallsyms so that per kernel module struct map are
instantiated was also left for another patch. That will allow
removing the module name from each of its symbols.
struct symbol was reduced by removing the ->module backpointer and
moving it (well now the map) to struct symbol_entry in perf top,
that is its only user right now.
The total linecount went down by ~500 lines.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Avi Kivity <avi@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Move histogram related functions into their own files (hist.c and
hist.h) and make use of them in builtin-annotate.c and
builtin-report.c.
Signed-off-by: John Kacur <jkacur@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <alpine.LFD.2.00.0909281531180.8316@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Create util/sort.[ch] and move common functionality for
builtin-report.c and builtin-annotate.c there, and make use of it.
Signed-off-by: John Kacur <jkacur@redhat.com>
LKML-Reference: <alpine.LFD.2.00.0909241758390.11383@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Bye-bye Performance Counters, welcome Performance Events!
In the past few months the perfcounters subsystem has grown out its
initial role of counting hardware events, and has become (and is
becoming) a much broader generic event enumeration, reporting, logging,
monitoring, analysis facility.
Naming its core object 'perf_counter' and naming the subsystem
'perfcounters' has become more and more of a misnomer. With pending
code like hw-breakpoints support the 'counter' name is less and
less appropriate.
All in one, we've decided to rename the subsystem to 'performance
events' and to propagate this rename through all fields, variables
and API names. (in an ABI compatible fashion)
The word 'event' is also a bit shorter than 'counter' - which makes
it slightly more convenient to write/handle as well.
Thanks goes to Stephane Eranian who first observed this misnomer and
suggested a rename.
User-space tooling and ABI compatibility is not affected - this patch
should be function-invariant. (Also, defconfigs were not touched to
keep the size down.)
This patch has been generated via the following script:
FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')
sed -i \
-e 's/PERF_EVENT_/PERF_RECORD_/g' \
-e 's/PERF_COUNTER/PERF_EVENT/g' \
-e 's/perf_counter/perf_event/g' \
-e 's/nb_counters/nb_events/g' \
-e 's/swcounter/swevent/g' \
-e 's/tpcounter_event/tp_event/g' \
$FILES
for N in $(find . -name perf_counter.[ch]); do
M=$(echo $N | sed 's/perf_counter/perf_event/g')
mv $N $M
done
FILES=$(find . -name perf_event.*)
sed -i \
-e 's/COUNTER_MASK/REG_MASK/g' \
-e 's/COUNTER/EVENT/g' \
-e 's/\<event\>/event_id/g' \
-e 's/counter/event/g' \
-e 's/Counter/Event/g' \
$FILES
... to keep it as correct as possible. This script can also be
used by anyone who has pending perfcounters patches - it converts
a Linux kernel tree over to the new naming. We tried to time this
change to the point in time where the amount of pending patches
is the smallest: the end of the merge window.
Namespace clashes were fixed up in a preparatory patch - and some
stylistic fallout will be fixed up in a subsequent patch.
( NOTE: 'counters' are still the proper terminology when we deal
with hardware registers - and these sed scripts are a bit
over-eager in renaming them. I've undone some of that, but
in case there's something left where 'counter' would be
better than 'event' we can undo that on an individual basis
instead of touching an otherwise nicely automated patch. )
Suggested-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Paul Mackerras <paulus@samba.org>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Merge reason: this topic is ready now to merge into the main
development branch for .32, with functional
perf trace output.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This improves patch fa6963b24 so that perf.data stuff that has
been dumped as root can be read (annotate/report) by a user
without the use of the --force.
Rationale is that root has plenty of ways to screw us (usually)
that do not require twisted schemes involving specially
crafting a perf.data.
Signed-off-by: Pierre Habouzit <pierre.habouzit@intersec.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <stable@kernel.org>
LKML-Reference: <20090827075902.GF19653@laphroaig.corp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add an owner check to opening perf.data files and a switch to
silence it.
Because perf-report/perf-annotate are binary parsers reading
another users' perf.data file could be a security risk if the
file were explicitly engineered to trigger bugs in the parser
(we hope of course there are non such bugs, but you never
know).
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20090819092023.896648538@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The librarization of the thread helpers between annotate and
report lost some perf report specifics.
This patch fixes the thread comm column adjusting that has
been omitted during this export.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1250604226-6852-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
While running perf report -g in a perf.data file that hasn't
been recorded in callchain mode, the error reported has a
spelling issue:
./perf report -g
selected -c but no callchain data. Did you call perf record without -g?
Fix it.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1250543271-8383-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Librarize trace_event() helper so that perf trace can use it
too. Also clean up the debug.h includes a bit.
It's not good to have it included in perf.h because it doesn't
make it flexible against other headers it may need (headers
that can also depend on perf.h and then create a recursive
header dependency).
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1250453149-664-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Librarize the sample type and attr fetching from perf data file
headers so that we can also use it from perf trace.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1250448997-30715-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Annotate and report share the same flags to filter events
considering their context (kernel, user, hypervisor).
Both tools have their own definitions of these flags. Factorize
them out into the event headers file.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1250445414-29237-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We have two users of dprintf: report and annotate. Another one
is coming with perf trace. Then factorize it into the debug
file.
While at it, rename dprintf() to dump_printf() so that it
doesn't conflicts with its libc homograph.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1250443461-28130-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Related to a shadowed variable bug fix Valdis Kletnieks noticed
that perf does not get built with -Wshadow, which could have
helped us avoid the bug.
So enable -Wshadow and also enable the following warnings on
perf builds, in addition to the already enabled -Wall -Wextra
-std=gnu99 warnings:
-Wcast-align
-Wformat=2
-Wshadow
-Winit-self
-Wpacked
-Wredundant-decls
-Wstack-protector
-Wstrict-aliasing=3
-Wswitch-default
-Wswitch-enum
-Wno-system-headers
-Wundef
-Wvolatile-register-var
-Wwrite-strings
-Wbad-function-cast
-Wmissing-declarations
-Wmissing-prototypes
-Wnested-externs
-Wold-style-definition
-Wstrict-prototypes
-Wdeclaration-after-statement
And change/fix the perf code to build cleanly under GCC 4.3.2.
The list of warnings enablement is rather arbitrary: it's based
on my (quick) reading of the GCC manpages and trying them on
perf.
I categorized the warnings based on individually enabling them
and looking whether they trigger something in the perf build.
If i liked those warnings (i.e. if they trigger for something
that arguably could be improved) i enabled the warning.
If the warnings seemed to come from language laywers spamming
the build with tons of nuisance warnings i generally kept them
off. Most of the sign conversion related warnings were in
this category. (A second patch enabling some of the sign
warnings might be welcome - sign bugs can be nasty.)
I also kept warnings that seem to make sense from their manpage
description and which produced no actual warnings on our code
base. These warnings might still be turned off if they end up
being a nuisance.
I also left out a few warnings that are not supported in older
compilers.
[ Note that these changes might break the build on older
compilers i did not test, or on non-x86 architectures that
produce different warnings, so more testing would be welcome. ]
Reported-by: Valdis.Kletnieks@vt.edu
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Factorize the thread management code used by perf-annotate and
perf-report in dedicated source and header files.
v2: pass last_match by address so that it can actually be
modified.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1250245313-6995-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Conflicts:
kernel/perf_counter.c
Merge reason: update to latest upstream (-rc6) and resolve
the conflict with urgent fixes.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We're interested in just those symbols/DSOs, so filter out the
unresolved ones.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20090812211957.GE3495@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This made it easier to find the firefox threading related
bug.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090811192138.GE18061@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Factorize the dso mapping helpers into a single purpose common file
"util/map.c"
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Brice Goglin <Brice.Goglin@inria.fr>
Factorize the multiple definition of the events structures into a
single util/event.h file.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Brice Goglin <Brice.Goglin@inria.fr>
Factorize multiple definitions of high level dso helpers into the
symbol source file.
The side effect is a general export of the verbose and eprintf
debugging helpers into a new file dedicated to debugging purposes.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Brice Goglin <Brice.Goglin@inria.fr>
If --pretty=raw is given to perf report -T, it now displays one
line per-thread per-counter with the raw event id added.
We get:
# PID TID Name Raw Count
18608 18609 cache-misses 28e 416744
18608 18609 cache-references 28f 6456792
18608 18608 cache-misses 28e 448219
18608 18608 cache-references 28f 7270244
instead of:
# PID TID cache-misses cache-references
18608 18609 416744 6456792
18608 18608 448219 7270244
Signed-off-by: Brice Goglin <Brice.Goglin@inria.fr>
Acked-by: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <4A802008.5050409@inria.fr>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Improve and fix the handling of per-thread counter stats
recorded via perf record -s. Previously we only displayed
it in debug printouts (-D) and even that output was hard
to disambiguate.
I moved everything to utils/values.[ch] so that we may reuse
it in perf stat.
We get something like this now:
# PID TID cache-misses cache-references
4658 4659 495581 3238779
4658 4662 498246 3236823
4658 4663 499531 3243162
Then it'll be easy to add --pretty=raw to display a single line per thread/event.
By the way, -S was also used for --symbol... So I used -T/--thread here.
perf report: Add -T/--threads to display per-thread counter values
We get something like this now:
# PID TID cache-misses cache-references
4658 4659 495581 3238779
4658 4662 498246 3236823
4658 4663 499531 3243162
Per-thread arrays of counter values are managed in utils/values.[ch]
Signed-off-by: Brice Goglin <Brice.Goglin@inria.fr>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus@samba.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When we filter the callchains below a given percentage, we
ignore them and the end result only shows entries that have an
upper percentage than the filter threshold.
It seems to users then that we have an imbalance in the
percentage, as if the sum inside a profiled branch doesn't
reach 100%.
Since in the past there have been real perf report bugs that
showed the same sypmtom, it would be nice to assure the user
that the data is perfect and trustable and it all sums up to
100.00%.
So fix this by displaying the remaining hits that have been
filtered but without more detail than their amount in each
branches. Example while filtering below 50%:
7.73% [k] delay_tsc
|
|--98.22%-- __const_udelay
| |
| |--86.37%-- ath5k_hw_register_timeout
| | ath5k_hw_noise_floor_calibration
| | ath5k_hw_reset
| | ath5k_reset
| | ath5k_config
| | ieee80211_hw_config
| | |
| | |--88.53%-- ieee80211_scan_work
| | | worker_thread
| | | kthread
| | | child_rip
| | --11.47%-- [...]
| --13.63%-- [...]
--1.78%-- [...]
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1249690585-9145-4-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If we recorded with -g option to record the callchain, right now
we require a -g option to perf report as well - and people reported
this as unnecessary complication: the user already specified -g
once, no need to require it a second time.
So if the recording includes call-chains, display the callchain by
default from perf report.
( The user can override this default using "-g none" option from
perf report. )
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1249690585-9145-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Used with perf report --verbose:
[acme@doppio linux-2.6-tip]$ perf report -v | head -16
5.17% firefox /usr/lib64/xulrunner-1.9.1/libxul.so 0x00000000005d8eee f [.] imgContainer::DrawFrameTo(gfxIImageFrame*, gfxIImageFrame*, nsRect&)
2.56% firefox /lib64/libpthread-2.10.1.so 0x0000000000008e02 d [.] __pthread_mutex_lock_internal
1.94% firefox /usr/lib64/xulrunner-1.9.1/libxul.so 0x0000000000d0af8f f [.] SearchTable
1.75% firefox [kernel] 0xffffffffff60013b k [.] vread_hpet
1.63% firefox /lib64/libpthread-2.10.1.so 0x000000000000a404 d [.] __pthread_mutex_unlock
1.47% firefox /usr/lib64/xulrunner-1.9.1/libmozjs.so 0x00000000000482ea f [.] js_Interpret
1.42% firefox /usr/lib64/xulrunner-1.9.1/libmozjs.so 0x000000000003eda3 f [.] JS_CallTracer
1.24% firefox [kernel] 0xffffffff8102ca4a k [k] read_hpet
1.16% firefox [kernel] 0xffffffff810f3dd4 k [k] fget_light
1.11% firefox /usr/lib64/xulrunner-1.9.1/libmozjs.so 0x00000000000567ff f [.] js_TraceObject
0.98% firefox /usr/lib64/firefox-3.5.2/firefox 0x000000000000dd23 b [.] arena_ralloc
[acme@doppio linux-2.6-tip]$
The new field is just after the symbol address. To help in
figuring out symbol resolution bugs.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Brice Goglin reported:
> I can easily sort them by thread id, but I don't know how to match
> my 4 events with each group of 4 lines.
Also report the counter id and the time running/enabled
stats (in case the counter got time-shared).
Reported-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The callchain fractal mode builds each new total hits in a new
branch of profiling by using the parent's hits of the current
branch plus the hits of the children.
This is wrong, the total hits of a branch should be made of the
sum of every children hits, we must ignore the parent hits in
this scope.
This patch also fixes another mistake with the hit counting.
Now the rates are correct.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If you're doing performance testing, you're interested in the
symbols anyway so lets make "--sort comm,dso,symbol" the
default sort option.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: acme@redhat.com
LKML-Reference: <1249467921-10450-1-git-send-email-penberg@cs.helsinki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Check whether index is within bounds before testing the element.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: a.p.zijlstra@chello.nl
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <4A757BCF.40101@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Since FORK is now also issued for threads, detect those by
comparing the parent and child PID.
Teach it about EXIT events and ignore them.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Anton noted that for inherited counters the counter-id as provided by
PERF_SAMPLE_ID isn't mappable to the id found through PERF_RECORD_ID
because each inherited counter gets its own id.
His suggestion was to always return the parent counter id, since that
is the primary counter id as exposed. However, these inherited
counters have a unique identifier so that events like
PERF_EVENT_PERIOD and PERF_EVENT_THROTTLE can be specific about which
counter gets modified, which is important when trying to normalize the
sample streams.
This patch removes PERF_EVENT_PERIOD in favour of PERF_SAMPLE_PERIOD,
which is more useful anyway, since changing periods became a lot more
common than initially thought -- rendering PERF_EVENT_PERIOD the less
useful solution (also, PERF_SAMPLE_PERIOD reports the more accurate
value, since it reports the value used to trigger the overflow,
whereas PERF_EVENT_PERIOD simply reports the requested period changed,
which might only take effect on the next cycle).
This still leaves us PERF_EVENT_THROTTLE to consider, but since that
_should_ be a rare occurrence, and linking it to a primary id is the
most useful bit to diagnose the problem, we introduce a
PERF_SAMPLE_STREAM_ID, for those few cases where the full
reconstruction is important.
[Does change the ABI a little, but I see no other way out]
Suggested-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1248095846.15751.8781.camel@twins>
perf record uses -g for logging call graph data but perf report
uses -c to print call graph data. Be consistent and use -g
everywhere for call graph data.
Also update the help text to reflect the current default -
fractal,0.5
Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090716104817.803604373@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When we filter by column content we may end up with a column
that has the same value for all the lines. So remove that
column and tell its unique value on the top, as a comment.
Example:
[acme@doppio pahole]$ perf report --sort comm,dso,symbol -d ./build/libdwarves.so.1.0.0 -C pahole | head -15
# dso: ./build/libdwarves.so.1.0.0
# comm: pahole
# Samples: 58409
#
# Overhead Symbol
# ........ ......
#
20.93% [.] tag__recode_dwarf_type
14.94% [.] namespace__recode_dwarf_types
10.38% [.] cu__table_add_tag
6.69% [.] __die__process_tag
5.05% [.] die__process_function
4.70% [.] list__for_all_tags
3.68% [.] tag__init
3.48% [.] die__create_new_parameter
[acme@doppio pahole]$
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1247325517-12272-3-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Always printing the level info about if it is in the kernel,
hypervisor or userspace as that is in the hist_entry.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1247325517-12272-1-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Auto-adjust column width of perf report output to the
longest occuring string length.
Example:
[acme@doppio pahole]$ perf report --sort comm,dso,symbol | head -13
12.79% pahole /usr/lib64/libdw-0.141.so [.] __libdw_find_attr
8.90% pahole /lib64/libc-2.10.1.so [.] _int_malloc
8.68% pahole /usr/lib64/libdw-0.141.so [.] __libdw_form_val_len
8.15% pahole /lib64/libc-2.10.1.so [.] __GI_strcmp
6.80% pahole /lib64/libc-2.10.1.so [.] __tsearch
5.54% pahole ./build/libdwarves.so.1.0.0 [.] tag__recode_dwarf_type
[acme@doppio pahole]$
[acme@doppio pahole]$ perf report --sort comm,dso,symbol -d /lib64/libc-2.10.1.so | head -10
21.92% pahole /lib64/libc-2.10.1.so [.] _int_malloc
20.08% pahole /lib64/libc-2.10.1.so [.] __GI_strcmp
16.75% pahole /lib64/libc-2.10.1.so [.] __tsearch
[acme@doppio pahole]$
Also add these extra options to control the new behaviour:
-w, --field-width
Force each column width to the provided list, for large terminal
readability.
-t, --field-separator:
Use a special separator character and don't pad with spaces, replacing
all occurances of this separator in symbol names (and other output) with
a '.' character, that thus it's the only non valid separator.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20090711014728.GH3452@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The current callchain displays the overhead rates as absolute:
relative to the total overhead.
This patch provides relative overhead percentage, in which each
branch of the callchain tree is a independant instrumentated object.
This provides a 'fractal' view of the call-chain profile: each
sub-graph looks like a profile in itself - relative to its parent.
You can produce such output by using the "fractal" mode
that you can abbreviate via f, fr, fra, frac, etc...
./perf report -s sym -c fractal
Example:
8.46% [k] copy_user_generic_string
|
|--52.01%-- generic_file_aio_read
| do_sync_read
| vfs_read
| |
| |--97.20%-- sys_pread64
| | system_call_fastpath
| | pread64
| |
| --2.81%-- sys_read
| system_call_fastpath
| __read
|
|--39.85%-- generic_file_buffered_write
| __generic_file_aio_write_nolock
| generic_file_aio_write
| do_sync_write
| reiserfs_file_write
| vfs_write
| |
| |--97.05%-- sys_pwrite64
| | system_call_fastpath
| | __pwrite64
| |
| --2.95%-- sys_write
| system_call_fastpath
| __write_nocancel
[...]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246772361-9960-5-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The default callchain parameters are set to use the flat mode and never
filter any overhead threshold of backtrace.
But flat mode is boring compared to graph mode.
Also the number of callchains may be very high if none is
filtered.
Let's change this to set the graph view and a minimum overhead of 0.5%
as default parameters.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246772361-9960-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If the user doesn't provide options to tune his callchain output
(ie: if he uses -c without arguments) then the default value passed
in the OPT_CALLBACK_DEFAULT() macro is used.
But it's parsed later by strtok() which will replace comma separators
to a zero. This may segfault as we are using a read-only string.
Use a modifiable one instead, and also fix the "100%" default
minimum threshold value by turning it into a 0 (output every callchains)
as it was intended in the origin.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246772361-9960-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
perf report segfaults while trying to handle callchains from a non
callchain data file.
Instead of a segfault, print a useful message to the user.
Reported-by: Jens Axboe <jens.axboe@oracle.com>
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246772361-9960-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Certain versions of GCC dont see the initialization that is done here:
builtin-report.c: In function ‘__cmd_report’:
builtin-report.c:1038: warning: ‘syms’ may be used uninitialized in this function
So annotate it with a NULL initialization.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This adds the use of colors to signal at a glance the important
overhead thresholds in callchains hit rates.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246558475-10624-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Among perf annotate, perf report and perf top, we can find the
common colored printing of percents according to the following
rules:
High overhead = > 5%, colored in red
Mid overhead = > 0.5%, colored in green
Low overhead = < 0.5%, default color
Factorize these multiple checks in a single function named
percent_color_fprintf() and also provide a get_percent_color()
for sites which print percentages and other things at the same
time.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246558475-10624-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Callchains output may become a burden on a trace because even
rarely hit site are exposed. This can be too much information.
Let the user set a threshold as a minimum percent of hits using
the new pattern for the -c option:
-c mode,min_percent
Example:
$ perf report -s sym -c flat,4
8.25% [k] copy_user_generic_string
4.19%
copy_user_generic_string
generic_file_aio_read
do_sync_read
vfs_read
sys_pread64
system_call_fastpath
pread64
5.39% [k] search_by_key
4.63% 0x00000000009e0a
2.36% [k] memcpy_c
[...]
$ perf report -s sym -c graph,2
8.25% [k] copy_user_generic_string
|
|--4.31%-- generic_file_aio_read
| do_sync_read
| vfs_read
| |
| --4.19%-- sys_pread64
| system_call_fastpath
| pread64
|
--3.24%-- generic_file_buffered_write
__generic_file_aio_write_nolock
generic_file_aio_write
do_sync_write
reiserfs_file_write
vfs_write
|
--3.14%-- sys_pwrite64
system_call_fastpath
__pwrite64
5.39% [k] search_by_key
|
--2.23%-- reiserfs_update_sd_size
4.63% 0x00000000009e0a
2.36% [k] memcpy_c
[...]
You can also omit it and it will default to 0.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246558475-10624-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Currently, the printing of callchains is done in a single
vertical level, this is the "flat" mode:
8.25% [k] copy_user_generic_string
4.19%
copy_user_generic_string
generic_file_aio_read
do_sync_read
vfs_read
sys_pread64
system_call_fastpath
pread64
This patch introduces a new "graph" mode which provides a
hierarchical output of factorized paths recursively sorted:
8.25% [k] copy_user_generic_string
|
|--4.31%-- generic_file_aio_read
| do_sync_read
| vfs_read
| |
| |--4.19%-- sys_pread64
| | system_call_fastpath
| | pread64
| |
| --0.12%-- sys_read
| system_call_fastpath
| __read
|
|--3.24%-- generic_file_buffered_write
| __generic_file_aio_write_nolock
| generic_file_aio_write
| do_sync_write
| reiserfs_file_write
| vfs_write
| |
| |--3.14%-- sys_pwrite64
| | system_call_fastpath
| | __pwrite64
| |
| --0.10%-- sys_write
[...]
The command line has then changed.
By providing the -c option, the callchain will output in the
flat mode by default.
But you can override it:
perf report -c graph
or
perf report -c flat
You can also pass the abreviated mode:
perf report -c g
or
perf report -c gra
will both make use of the graph mode.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246550301-8954-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add the -m/--modules option to perf report and perf annotate,
which enables live module symbol/image loading. To be used
with -k/--vmlinux.
(Also give perf annotate a -P/--full-paths option.)
Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246514986.13293.48.camel@marge.simson.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
perf_counter tools: Make symbol loading consistently return number of loaded symbols.
Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246514758.13293.42.camel@marge.simson.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The copy we were using came from another copy I did for the dwarves
(pahole) package, that came from the kernel years ago.
The only function that is used by the perf tools and that isn't in the
kernel is list_del_range, that I'm leaving in the perf tools only for
now.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20090701174608.GA5823@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The tools/perf/util/rbtree.c copy already drifted by three
csets:
4b324126e04c6011781116c047add3
So remove the copy and use the lib/rbtree.c directly, sharing
the source code while still generating a separate object file,
since tools/perf uses a far more agressive -O6 switch.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090701152837.GG15682@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Enable -Wextra. This found a few real bugs plus a number
of signed/unsigned type mismatches/uncleanlinesses. It
also required a few annotations
All things considered it was still worth it so lets try with
this enabled for now.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix:
builtin-report.c: In function ‘hist_entry__add’:
builtin-report.c:1015: error: case label not within a switch statement
builtin-report.c:1017: error: break statement not within loop or switch
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add a dso for hypervisor samples. We don't get any symbol
information on the ppc64 hypervisor but this at least gives
us a high level summary of the time spent in there.
Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: a.p.zijlstra@chello.nl
Cc: paulus@samba.org
LKML-Reference: <20090630230141.182536873@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
PERF_EVENT_MISC_* is not a bitmask, so we have to mask and compare.
Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: a.p.zijlstra@chello.nl
Cc: paulus@samba.org
LKML-Reference: <20090630230141.088394681@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
So that we can filter by comm. Symbols in other comms won't be
accounted for.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1246399282-20934-3-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
So that we can filter by dso. Symbols in other dsos won't be
accounted for.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1246399282-20934-2-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Use the newly created callchains radix tree to gather the chains stats
from the recorded events and then print the callchains for all of them,
sorted by hits, using the "-c" parameter with perf report.
Example:
66.15% [k] atm_clip_exit
63.08%
0xffffffffffffff80
0xffffffff810196a8
0xffffffff810c14c8
0xffffffff8101a79c
0xffffffff810194f3
0xffffffff8106ab7f
0xffffffff8106abe5
0xffffffff8106acde
0xffffffff8100d94b
0xffffffff8153e7ea
[...]
1.54%
0xffffffffffffff80
0xffffffff810196a8
0xffffffff810c14c8
0xffffffff8101a79c
[...]
Symbols are not yet resolved.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1246026481-8314-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We plan to display the callchains depending on some user-configurable
parameters.
To gather the callchains stats from the recorded stream in a fast way,
this patch introduces an ad hoc radix tree adapted for callchains and also
a rbtree to sort these callchains once we have gathered every events
from the stream.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1246026481-8314-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Provide the basic infrastructure to provide per task stats.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The PERF_EVENT_READ implementation made me realize we don't
actually need the sample_type int the output sample, since
we already have that in the perf_counter_attr information.
Therefore, remove the PERF_EVENT_MISC_OVERFLOW bit and the
event->type overloading, and imply put counter overflow
samples in a PERF_EVENT_SAMPLE type.
This also fixes the issue that event->type was only 32-bit
and sample_type had 64 usable bits.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Create a structured file format that includes the full
perf_counter_attr and all its relevant counter IDs so that
the reporting program has full information.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Martin Schwidefsky reported "perf report" symbol resolution
problems on S390.
Since we only report MMAP, not MUNMAP, we have to deal with
overlapping maps.
We used to simply throw out the old map on the assumption whole
maps got unmapped. This obviously doesn't deal with partial
unmaps. However it appears some dynamic linkers do fancy
partial unmaps (s390), so do something more elaborate and
truncate the old maps, only removing them when they've been
fully covered.
This resolves (part of) the S390 symbol resolution problems.
Reported-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Tested-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Print more symbol relocation related info under -vv.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Building perfcounter tools raises the following warnings:
builtin-record.c: In function ‘atexit_header’:
builtin-record.c:464: erreur: ignoring return value of ‘pwrite’, declared with attribute warn_unused_result
builtin-record.c: In function ‘__cmd_record’:
builtin-record.c:503: erreur: ignoring return value of ‘read’, declared with attribute warn_unused_result
builtin-report.c: In function ‘__cmd_report’:
builtin-report.c:1403: erreur: ignoring return value of ‘read’, declared with attribute warn_unused_result
This patch handles these IO return values.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1245456100-5477-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
On 64-bit powerpc, __u64 is defined to be unsigned long rather than
unsigned long long. This causes compiler warnings every time we
print a __u64 value with %Lx.
Rather than changing __u64, we define our own u64 to be unsigned long
long on all architectures, and similarly s64 as signed long long.
For consistency we also define u32, s32, u16, s16, u8 and s8. These
definitions are put in a new header, types.h, because these definitions
are needed in util/string.h and util/symbol.h.
The main change here is the mechanical change of __[us]{64,32,16,8}
to remove the "__". The other changes are:
* Create types.h
* Include types.h in perf.h, util/string.h and util/symbol.h
* Add types.h to the LIB_H definition in Makefile
* Added (u64) casts in process_overflow_event() and print_sym_table()
to kill two remaining warnings.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: benh@kernel.crashing.org
LKML-Reference: <19003.33494.495844.956580@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add a data file header so we can transfer data between record and report.
LKML-Reference: <new-submission>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Update the tools to reflect the new callchain sampling format.
LKML-Reference: <new-submission>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Make it easier to use parent filtering - default to a filtered
output. Also add the parent column so that we get collapsing but
dont display it by default.
add --no-exclude-other to override this.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Make use of the new ->data_tail mechanism to tell kernel-space
about user-space draining the data stream. Emit lost events
(and display them) if they happen.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Introduce isprint() to print out raw event dumps to ASCII, etc.
(This is an extension to upstream Git's ctype.c.)
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
[ removed openssl.h inclusion from util.h - it leaked ctype.h ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add boundary checks for call-chain events. In case of corrupted
entries we could crash otherwise.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Instead of the ambigious 'call' naming use the much more
specific 'parent' naming:
- rename --call <regex> to --parent <regex>
- rename --sort call to --sort parent
- rename [unmatched] to [other] - to signal that this is not
an error but the inverse set
Also add pagefaults to the default parent-symbol pattern too,
as it's a 'syscall overhead category' in a sense.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The Git utils came with a ctype replacement that doesn't provide
isprint(). Add a replacement.
Solves a build bug on certain distros.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Implement sorting by callchain symbols, --sort <call>.
It will create a new column which will show a match to
--call $regex or "[unmatched]".
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Yong Wang reported the following compiler warning:
builtin-report.c: In function 'process_overflow_event':
builtin-report.c:984: error: cast to pointer from integer of different size
Which happens because we try to print ->ips[] out with a limited
format, losing the high 32 bits. Print it out using %016Lx instead.
Reported-by: Yong Wang <yong.y.wang@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Take advantage of call-graph percounter sampling/recording to
display a non-trivial histogram: the true, collapsed/summarized
cost measurement, on a per system call total overhead basis:
aldebaran:~/linux/linux/tools/perf> ./perf record -g -a -f ~/hackbench 10
aldebaran:~/linux/linux/tools/perf> ./perf report -s symbol --syscalls | head -10
#
# (3536 samples)
#
# Overhead Symbol
# ........ ......
#
40.75% [k] sys_write
40.21% [k] sys_read
4.44% [k] do_nmi
...
This is done by accounting each (reliable) call-chain that chains back
to a given system call to that system call function.
[ So in the above example we can see that hackbench spends about 40% of
its total time somewhere in sys_write() and 40% somewhere in
sys_read(), the rest of the time is spent in user-space. The time
is not spent in sys_write() _itself_ but in one of its many child
functions. ]
Or, a recording of a (source files are already in the page-cache) kernel build:
$ perf record -g -m 512 -f -- make -j32 kernel
$ perf report -s s --syscalls | grep '\[k\]' | grep -v nmi
4.14% [k] do_page_fault
1.20% [k] sys_write
1.10% [k] sys_open
0.63% [k] sys_exit_group
0.48% [k] smp_apic_timer_interrupt
0.37% [k] sys_read
0.37% [k] sys_execve
0.20% [k] sys_mmap
0.18% [k] sys_close
0.14% [k] sys_munmap
0.13% [k] sys_poll
0.09% [k] sys_newstat
0.07% [k] sys_clone
0.06% [k] sys_newfstat
0.05% [k] sys_access
0.05% [k] schedule
Shows the true total cost of each syscall variant that gets used
during a kernel build. This profile reveals it that pagefaults are
the costliest, followed by read()/write().
An interesting detail: timer interrupts cost 0.5% - or 0.5 seconds
per 100 seconds of kernel build-time. (this was done with HZ=1000)
The summary is done in 'perf report', i.e. in the post-processing
stage - so once we have a good call-graph recording, this type of
non-trivial high-level analysis becomes possible.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
A build error slipped in:
builtin-report.c: In function ‘hist_entry__fprintf’:
builtin-report.c:711: error: format ‘%12d’ expects type ‘int’, but argument 3 has type ‘uint64_t’
Because we got a bit sloppy with those types. uint64_t really sucks,
because there's no printf format for it. So standardize on __u64
instead - for all types that go to or come from the ABI (which is __u64),
or for values that need to be large enough even on 32-bit.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When we use variable period sampling, add the period to the sample
data and use that to normalize the samples.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Create the counter in a disabled state and only enable it after we
mmap() the buffer, this allows us to see the first few samples (and
observe the frequency ramp).
Furthermore, print the period in the verbose report.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The rule is:
- high overhead: red
- mid overhead: green
- low overhead: normal (white/black)
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds support for profiling JIT generated code to 'perf
report'. A JIT compiler is required to generate a "/tmp/perf-$PID.map"
symbols map that is parsed when looking and displaying symbols.
Thanks to Peter Zijlstra for his help with this patch!
Example "perf report" output with the Jato JIT:
#
# (40311 samples)
#
# Overhead Command Shared Object Symbol
# ........ ................ ......................... ......
#
97.80% jato /tmp/perf-11915.map [.] Fibonacci.fib(I)I
0.56% jato 00000000b7fa023b 0x000000b7fa023b
0.45% jato /tmp/perf-11915.map [.] Fibonacci.main([Ljava/lang/String;)V
0.38% jato [kernel] [k] get_page_from_freelist
0.06% jato [kernel] [k] kunmap_atomic
0.05% jato ./jato [.] utf8Hash
0.04% jato ./jato [.] executeJava
0.04% jato ./jato [.] defineClass
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: a.p.zijlstra@chello.nl
Cc: acme@redhat.com
LKML-Reference: <Pine.LNX.4.64.0906082111590.12407@melkki.cs.Helsinki.FI>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Before:
$ perf report
failed to open file: No such file or directory
After:
$ perf report
failed to open file: perf.data (try 'perf record' first)
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Several people have suggested that 'perf' has become a full-fledged
tool that should be moved out of Documentation/. Move it to the
(new) tools/ directory.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Feng Tang