As part of Chrome OS's FAFT (Fully Automated Firmware Testing)
tests, we need to ensure that the H1 chip is properly setting
some GPIO lines. The h1_gpio attribute exposes the state
of the lines:
- ENTRY_TO_FACT_MODE in BIT(0)
- SPI_CHROME_SEL in BIT(1)
There are two reasons that I am exposing this in debugfs,
and not as a GPIO:
1. This is only useful for testing, so end users shouldn't ever
care about this. In fact, if it passes the tests, then the value of
h1_gpio will always be 2, so it would be really uninteresting for users.
2. This GPIO is not connected to, controlled by, or really even related
to the AP. The GPIO runs between the EC and the H1 security chip.
Changes in v4:
- Use "0x02x\n" instead of "02x\n" for format string
- Use DEFINE_DEBUGFS_ATTRIBUTE()
- Add documentation
Changes in v3:
- Fix documentation to correspond with formatting change in v2.
Changes in v2:
- Zero out the unused fields in the request.
- Format result as "%02x\n" instead of as a decimal.
Signed-off-by: Nick Crews <ncrews@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
The current API for the wilco EC mailbox interface is bad.
It assumes that most messages sent to the EC follow a similar structure,
with a command byte in MBOX[0], followed by a junk byte, followed by
actual data. This doesn't happen in several cases, such as setting the
RTC time, using the raw debugfs interface, and reading or writing
properties such as the Peak Shift policy (this last to be submitted soon).
Similarly for the response message from the EC, the current interface
assumes that the first byte of data is always 0, and the second byte
is unused. However, in both setting and getting the RTC time, in the
debugfs interface, and for reading and writing properties, this isn't
true.
The current way to resolve this is to use WILCO_EC_FLAG_RAW* flags to
specify when and when not to skip these initial bytes in the sent and
received message. They are confusing and used so much that they are
normal, and not exceptions. In addition, the first byte of
response in the debugfs interface is still always skipped, which is
weird, since this raw interface should be giving the entire result.
Additionally, sent messages assume the first byte is a command, and so
struct wilco_ec_message contains the "command" field. In setting or
getting properties however, the first byte is not a command, and so this
field has to be filled with a byte that isn't actually a command. This
is again inconsistent.
wilco_ec_message contains a result field as well, copied from
wilco_ec_response->result. The message result field should be removed:
if the message fails, the cause is already logged, and the callers are
alerted. They will never care about the actual state of the result flag.
These flags and different cases make the wilco_ec_transfer() function,
used in wilco_ec_mailbox(), really gross, dealing with a bunch of
different cases. It's difficult to figure out what it is doing.
Finally, making these assumptions about the structure of a message make
it so that the messages do not correspond well with the specification
for the EC's mailbox interface. For instance, this interface
specification may say that MBOX[9] in the received message contains
some information, but the calling code needs to remember that the first
byte of response is always skipped, and because it didn't set the
RESPONSE_RAW flag, the next byte is also skipped, so this information
is actually contained within wilco_ec_message->response_data[7]. This
makes it difficult to maintain this code in the future.
To fix these problems this patch standardizes the mailbox interface by:
- Removing the WILCO_EC_FLAG_RAW* flags
- Removing the command and reserved_raw bytes from wilco_ec_request
- Removing the mbox0 byte from wilco_ec_response
- Simplifying wilco_ec_transfer() because of these changes
- Gives the callers of wilco_ec_mailbox() the responsibility of exactly
and consistently defining the structure of the mailbox request and
response
- Removing command and result from wilco_ec_message.
This results in the reduction of total code, and makes it much more
maintainable and understandable.
Signed-off-by: Nick Crews <ncrews@chromium.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
As new transfer mechanisms are added to the EC codebase, they may
not support v2 of the EC protocol.
If the v3 initial handshake transfer fails, the kernel will try
and call cmd_xfer as a fallback. If v2 is not supported, cmd_xfer
will be NULL, and the code will end up causing a kernel panic.
Add a check for NULL before calling the transfer function, along
with a helpful comment explaining how one might end up in this
situation.
Signed-off-by: Enrico Granata <egranata@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
The CrOS USB PD logging feature is logically separate functionality of
the charge manager, hence has its own driver. The driver logs the event
data for the USB PD charger available in some ChromeOS Embedded
Controllers.
Signed-off-by: Guenter Roeck <groeck@chromium.org>
[remove macro to APPEND_STRING and minor cleanups]
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
The software running on the Chrome OS Embedded Controller (cros_ec)
handles SPI transfers in a bit of a wonky way. Specifically if the EC
sees too long of a delay in a SPI transfer it will give up and the
transfer will be counted as failed. Unfortunately the timeout is
fairly short, though the actual number may be different for different
EC codebases.
We can end up tripping the timeout pretty easily if we happen to
preempt the task running the SPI transfer and don't get back to it for
a little while.
Historically this hasn't been a _huge_ deal because:
1. On old devices Chrome OS used to run PREEMPT_VOLUNTARY. That meant
we were pretty unlikely to take a big break from the transfer.
2. On recent devices we had faster / more processors.
3. Recent devices didn't use "cros-ec-spi-pre-delay". Using that
delay makes us more likely to trip this use case.
4. For whatever reasons (I didn't dig) old kernels seem to be less
likely to trip this.
5. For the most part it's kinda OK if a few transfers to the EC fail.
Mostly we're just polling the battery or doing some other task
where we'll try again.
Even with the above things, this issue has reared its ugly head
periodically. We could solve this in a nice way by adding reliable
retries to the EC protocol [1] or by re-designing the code in the EC
codebase to allow it to wait longer, but that code doesn't ever seem
to get changed. ...and even if it did, it wouldn't help old devices.
It's now time to finally take a crack at making this a little better.
This patch isn't guaranteed to make every cros_ec SPI transfer
perfect, but it should improve things by a few orders of magnitude.
Specifically you can try this on a rk3288-veyron Chromebook (which is
slower and also _does_ need "cros-ec-spi-pre-delay"):
md5sum /dev/zero &
md5sum /dev/zero &
md5sum /dev/zero &
md5sum /dev/zero &
while true; do
cat /sys/class/power_supply/sbs-20-000b/charge_now > /dev/null;
done
...before this patch you'll see boatloads of errors. After this patch I
don't see any in the testing I did.
The way this patch works is by effectively boosting the priority of
the cros_ec transfers. As far as I know there is no simple way to
just boost the priority of the current process temporarily so the way
we accomplish this is by queuing the work on the system_highpri_wq.
NOTE: this patch relies on the fact that the SPI framework attempts to
push the messages out on the calling context (which is the one that is
boosted to high priority). As I understand from earlier (long ago)
discussions with Mark Brown this should be a fine assumption. Even if
it isn't true sometimes this patch will still not make things worse.
[1] https://crbug.com/678675
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
If the debugfs interface is enabled, every time a CrOS device is
instantiated a warning like this can appear for every probed device.
"device does not support reading the console log"
The warning message adds nothing, rather it is source of confusion as
this is expected on some cases. For example, on Samus, that has a
cros-ec and a cros-pd instance the message appears twice, and I suspect
this will happen also on those devices that has a non-standard EC.
If the command is not supported just return silently and don't print the
warning, otherwise the code will already print an error.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Before, ec->data_buffer could be written to from multiple
contexts at the same time. Since the ec is shared data,
it needs to be inside the mutex as well.
Fixes: 7b3d4f44ab ("platform/chrome: Add new driver for Wilco EC")
Signed-off-by: Nick Crews <ncrews@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
When CROS_EC_LPC is set to =m, we get a link failure for a
builtin wilco-ec module:
drivers/platform/chrome/wilco_ec/core.o: In function `wilco_ec_remove':
core.c:(.text+0x26): undefined reference to `cros_ec_lpc_mec_destroy'
drivers/platform/chrome/wilco_ec/core.o: In function `wilco_ec_probe':
core.c:(.text+0x18c): undefined reference to `cros_ec_lpc_mec_init'
core.c:(.text+0x224): undefined reference to `cros_ec_lpc_mec_destroy'
drivers/platform/chrome/wilco_ec/mailbox.o: In function `wilco_ec_mailbox':
mailbox.c:(.text+0x104): undefined reference to `cros_ec_lpc_io_bytes_mec'
The problem with the existing CROS_EC_LPC_MEC dependency is that this
is only for a 'bool' symbol, so the information about the exported
functions being in a module is lost on the way, and we actually have
to depend on both CROS_EC_LPC and CROS_EC_LPC_MEC.
Fixes: 7b3d4f44ab ("platform/chrome: Add new driver for Wilco EC")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
This Embedded Controller has an internal RTC that is exposed
as a standard RTC class driver with read/write functionality.
The driver is added to the drivers/rtc/ so that the maintainer of that
directory will be able to comment on this change, as that maintainer is
the expert on this system. In addition, the driver code is called
indirectly after a corresponding device is registered from core.c,
as opposed to core.c registering the driver callbacks directly.
To test:
> hwclock --show --rtc /dev/rtc1
2007-12-31 16:01:20.460959-08:00
> hwclock --systohc --rtc /dev/rtc1
> hwclock --show --rtc /dev/rtc1
2018-11-29 17:08:00.780793-08:00
> hwclock --show --rtc /dev/rtc1
2007-12-31 16:01:20.460959-08:00
> hwclock --systohc --rtc /dev/rtc1
> hwclock --show --rtc /dev/rtc1
2018-11-29 17:08:00.780793-08:00
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Signed-off-by: Nick Crews <ncrews@chromium.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
[Fix the sparse warning: symbol 'wilco_ec_rtc_read/write' was not declared]
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Add a debugfs attribute that allows sending raw commands to the EC.
This is useful for development and debug but should not be enabled
in a production environment.
To test:
Get the EC firmware build date
First send the request command
> echo 00 f0 38 00 03 00 > raw
Then read the result. "12/21/18" is in the middle of the response
> cat raw
00 31 32 2f 32 31 2f 31 38 00 00 0f 01 00 01 00 .12/21/18.......
Get the EC firmware build date
First send the request command
> echo 00 f0 38 00 03 00 > raw
Then read the result. "12/21/18" is in the middle of the response
> cat raw
00 31 32 2f 32 31 2f 31 38 00 00 0f 01 00 01 00 .12/21/18.......
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Signed-off-by: Nick Crews <ncrews@chromium.org>
[Fix off-by-one error in wilco_ec/debugfs.c]
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
This EC is an incompatible variant of the typical Chrome OS embedded
controller. It uses the same low-level communication and a similar
protocol with some significant differences. The EC firmware does
not support the same mailbox commands so it is not registered as a
cros_ec device type. This commit exports the wilco_ec_mailbox()
function so that other modules can use it to communicate with the EC.
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Signed-off-by: Nick Crews <ncrews@chromium.org>
[Fix the sparse warning: symbol 'wilco_ec_transfer' was not declared]
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
[Fix Kconfig dependencies for wilco_ec]
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
In order to allow this code to be re-used, remove the dependency
on the rest of the cros_ec code from the cros_ec_lpc_mec functions.
Instead of using a hardcoded register base address of 0x800 have
this be passed in to cros_ec_lpc_mec_init(). The existing cros_ec
use case now passes in the 0x800 base address this way.
There are some error checks that happen in cros_ec_lpc_mec_in_range()
that probably shouldn't be there, as they are checking kernel-space
callers and not user-space input. However, we'll just do the refactor in
this patch, and in a future patch might remove this error checking and
fix all the instances of code that calls this.
There's a similar problem in cros_ec_lpc_read_bytes(), where we return a
checksum, but on error just return 0. This should probably be changed so
that it returns int, but we don't want to have to mess with all the
calling code for this fix. Maybe we'll come back through later and fix
this.
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Signed-off-by: Nick Crews <ncrews@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
This driver no longer has any pr_{level} messages. Remove the pr_fmt().
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
This driver no longer has any pr_{level} messages. Remove the pr_fmt().
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Adopt the SPDX license identifier headers to ease license compliance
management. Also change the term 'Chrome OS' for 'ChromeOS' to be
coherent with other drivers.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Adopt the SPDX license identifier headers to ease license compliance
management. Also change the description for one more appropriate.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Adopt the SPDX license identifier headers to ease license compliance
management. Also remove the license boiler-plate and redundant driver
description.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Adopt the SPDX license identifier headers to ease license compliance
management. Also fix the module license mismatch and change the
description for a more descriptive phrase.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Adopt the SPDX license identifier headers to ease license compliance
management. Also change the description for one more appropriate.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Adopt the SPDX license identifier headers to ease license compliance
management. Also fix the module license mismatch and change the term
'Chrome OS' for 'ChromeOS' to be coherent with other drivers.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Due to the way attribute groups visibility work, the function
cros_ec_lightbar_attrs_are_visible is called multiple times, once per
attribute, and each of these calls makes an EC transaction. For what is
worth the EC log reports multiple errors on boot when the lightbar is
not available. Instead, check if the EC has a lightbar in the probe
function and only instantiate the device.
Ideally we should have instantiate the driver only if the
EC_FEATURE_LIGHTBAR is defined, but that's not possible because that flag
is not in the very first Pixel Chromebook (Link), only on Samus. So, the
driver is instantiated by his parent always.
This patch changes a bit the actual behaviour. Before the patch if an EC
doesn't have a lightbar an empty lightbar folder is created in
/sys/class/chromeos/<ec-device-name>, after the patch the empty folder is
not created, so, the folder is only created if the lightbar exists.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The cros-ec-vbc driver is DT-only and there is a DT property that
indicates if the EC has the VCB NVRAM, in such case instantiate the
driver but don't instantiate on the other cases.
To do this move the check code to its parent instead of play with the
attribute group visibility. This changes a bit the actual behaviour.
Before the patch if an EC doesn't have a VBC NVRAM an empty vbc folder
is created in /sys/class/chromeos/<ec-device-name>, after the patch the
empty folder is not created, so, the folder is only created if the vbc
is set.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The entire way how cros debugfs attibutes are created is broken.
cros_ec_sysfs should be its own driver and its attributes should be
associated with the sysfs driver not the mfd driver.
The patch also adds the sysfs documentation.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The entire way how cros debugfs attibutes are created is broken.
cros_ec_debugfs should be its own driver and its attributes should be
associated with a debugfs driver not the mfd driver.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The entire way how cros sysfs attibutes are created is broken.
cros_ec_vbc should be its own driver and its attributes should be
associated with a vbc driver not the mfd driver. In order to retain
the path, the vbc attributes are attached to the cros_class.
The patch also adds the sysfs documentation.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The entire way how cros sysfs attibutes are created is broken.
cros_ec_lightbar should be its own driver and its attributes should be
associated with a lightbar driver not the mfd driver. In order to retain
the path, the lightbar attributes are attached to the cros_class.
The patch also adds the sysfs documentation.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Use devm_mfd_add_devices() for adding cros-ec core MFD child devices. This
reduces the need of remove callback from platform/chrome for removing the
MFD child devices.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
EC_MKBP_EVENT_SENSOR_FIFO events can be triggered for a variety of
reasons, and there are very few cases in which they should be treated as
wakeup interrupts (particularly, when a certain
MOTIONSENSE_MODULE_FLAG_* is set, but this is not even supported in the
mainline cros_ec_sensor driver yet). Most of the time, they are benign
sensor readings. In any case, the top-level cros_ec device doesn't know
enough to determine that they should wake the system, and so it should
not report the event. This would be the job of the cros_ec_sensors
driver to parse.
This patch adds checks to cros_ec_get_next_event() such that it doesn't
signal 'wakeup' for events of type EC_MKBP_EVENT_SENSOR_FIFO.
This patch is particularly relevant on devices like Scarlet (Rockchip
RK3399 tablet, known as Acer Chromebook Tab 10), where the EC firmware
reports sensor events much more frequently. This was causing
/sys/power/wakeup_count to increase very frequently, often needlessly
interrupting our ability to suspend the system.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
cros_ec_get_next_event() is documented to return 0 for success and
negative for errors. It currently returns negative for some errors, and
non-negative (number of bytes received) for success (including some "no
data available" responses as zero). This mostly works out OK, because the
callers were more or less ignoring the documentation, and only treating
positive values as success (and indepdently checking the modification of
'wakeup').
Let's button this up by avoiding pretending to handle event/wakeup
distinctions when no event info was retrieved (i.e., returned 0 bytes).
And fix the documentation of cros_ec_get_host_event() and
cros_ec_get_next_event() to accurately describe their behavior.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
This commit allows cros_ec_lpc to register a direct IRQ instead of relying
on the ACPI notification chain to receive MKBP events.
This change is done in the interest of allowing reduced jitter in the
communication path between the CrOS EC and the host for receiving sensor
data.
Signed-off-by: Enrico Granata <egranata@chromium.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
Commit 57e94c8b97 caused cros-ec keyboard events
be truncated on many chromebooks so that Left and Right keys on Column 12 were
always 0. Use ret as memcpy len to fix this.
The old code was using ec_dev->event_size, which is the event payload/data size
excluding event_type header, for the length of the memcpy operation. Use ret
as memcpy length to avoid the off by one and copy the whole msg->data.
Fixes: 57e94c8b97 ("mfd: cros-ec: Increase maximum mkbp event size")
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Emil Karlson <jekarlson@gmail.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
The cros-ec-lpc driver lives in drivers/platform because is platform
specific, however there are two includes (cros_ec_lpc_mec.h and
cros_ec_lpc_reg.h) that lives in include/linux/mfd. These two includes
are only used for the platform driver and are not really related to the
MFD subsystem, so move the includes from include/linux/mfd to
drivers/platform/chrome.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
cros_ec_i2c and cros_ec_spi drivers moved from mfd
to chrome platform.
-----BEGIN PGP SIGNATURE-----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=HNMG
-----END PGP SIGNATURE-----
Merge tag 'chrome-platform-for-linus-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform
Pull chrome platform updates from Benson Leung.
Everything but the SPDX identifier updates actually came in earlier
through the MFD merge.
* tag 'chrome-platform-for-linus-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform:
platform/chrome: chromeos_tbmc - fix SPDX identifier
Immutable Branch which moves the cros_ec_i2c and cros_ec_spi
transport drivers from mfd to platform/chrome. Changes in arm are a simple
rename in defconfigs. Change in input is a rename in help text.
-----BEGIN PGP SIGNATURE-----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=EhHj
-----END PGP SIGNATURE-----
Merge branches 'ib-mfd-4.19', 'ib-mfd-gpio-pinctrl-4.19', 'ib-mfd-i915-media-platform-4.19' and 'ib-mfd-regulator-4.19', tag 'ib-platform-chrome-mfd-move-cros-ec-transport-for-4.19' into ibs-for-mfd-merged
Immutable branch (mfd, chrome) due for the v4.19 window
Immutable Branch which moves the cros_ec_i2c and cros_ec_spi
transport drivers from mfd to platform/chrome. Changes in arm are a simple
rename in defconfigs. Change in input is a rename in help text.
Having a 16 byte mkbp event size makes it possible to send CEC
messages from the EC to the AP directly inside the mkbp event
instead of first doing a notification and then a read.
Signed-off-by: Stefan Adolfsson <sadolfsson@chromium.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Immutable Branch which moves the cros_ec_i2c and cros_ec_spi
transport drivers from mfd to platform/chrome. Changes in arm are a simple
rename in defconfigs. Change in input is a rename in help text.
-----BEGIN PGP SIGNATURE-----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=EhHj
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=u5Ht
-----END PGP SIGNATURE-----
Merge tag 'ib-platform-chrome-mfd-move-cros-ec-transport-for-4.19' into working-branch-for-4.19
Immutable branch (mfd, chrome) due for the v4.19 window
Immutable Branch which moves the cros_ec_i2c and cros_ec_spi
transport drivers from mfd to platform/chrome. Changes in arm are a simple
rename in defconfigs. Change in input is a rename in help text.
There are some cros-ec transport drivers (I2C, SPI) living in MFD, while
others (LPC) living in drivers/platform. The transport drivers are more
platform specific. So, move the I2C and SPI transport drivers to the
platform/chrome directory. The patch also removes the MFD_ prefix of
their Kconfig symbols.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
Original submission was GPLv2 only, so mark as GPL-2.0.
Also restored some descriptive lines that were there before.
Signed-off-by: Benson Leung <bleung@chromium.org>
Further changes from Dmitry related to the removal of platform data from
atmel_mxt_ts and chromeos_laptop. This time, we have some changes that
teach chromeos_laptop how to supply acpi properties for some input devices
so that the peripheral driver doesn't have to do dmi matching on some
Chromebook platforms.
Also adds the Chromebook Tablet switch driver, which is useful for x86
convertible Chromebooks.
Other misc. cleanup.
Thanks,
Benson
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE6gYDF28Li+nEiKLaHwn1ewov5lgFAlsUrmMACgkQHwn1ewov
5ljpzRAAqgscZzPqHZNOtLC/QXsohdCKnbfjVL1Nd+xor773kJwA0jJVU6fSfvzx
sxqQkRUno3aFD3TeKzRVY+jBXzb8hkYUpIfvT2Fl3fGK26NIFaB+F0wqqwZZcyOt
36lR7Ngtun3HvrxxiJ8utQeF4z5fofpWRwSGzE+ADalBr47NSIBM2JofcWmo35tk
pw0wkZvvJhzSlouF4JW8ca6LjPpk6Ngw2988HEDzyXlYGwdS/IXGjriMQ5AIiRuE
qAFtydRYYcBfZ9IH7O3Utmq74mDg+UXcFjnnt8lrvbca8QiPRWvblxwkQ5alpbPQ
x/HS9dJqkPfy5xskKiivDSKCtYXSNi5E15crcbhreiZwSlX2ictVIYu9zEo2KYCh
aD0Ba1iCQVCs8uXdoIqIh92LDLzgkr8L7kjqqFwDWpQeEH5LGYtOaHD17e5vIBc8
dllkAiJfRPVtcJtdZgUkW7NwKl8CdKFAMi2X5owYCyEsPgwUtpi2xfO6xSpA2gWl
+srbY22RTcwmMgds0kktS46GgbW73rdFxEIlbeR6moaO6GUEILicsxu6BzvXYxuj
pfsjAt1CP50Hy1kInyiFjtgEwIEv0vbr39DsZNTWWjMFXlZHzmOc8JbjFK1lb+Kw
Hh2x31BtXHA4pFyk2DUem9ctqybDZePt1vlN5QYz7WjHzMeJRqg=
=mA72
-----END PGP SIGNATURE-----
Merge tag 'chrome-platform-for-linus-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform
Pull chrome platform updates from Benson Leung:
- further changes from Dmitry related to the removal of platform data
from atmel_mxt_ts and chromeos_laptop.
This time, we have some changes that teach chromeos_laptop how to
supply acpi properties for some input devices so that the peripheral
driver doesn't have to do dmi matching on some Chromebook platforms.
- new Chromebook Tablet switch driver, which is useful for x86
convertible Chromebooks.
- other misc cleanup
* tag 'chrome-platform-for-linus-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform:
platform/chrome: Use to_cros_ec_dev more broadly
platform/chrome: chromeos_laptop: fix touchpad button mapping on Celes
platform: chrome: Add input dependency for tablet switch driver
platform/chrome: chromeos_laptop - supply properties for ACPI devices
platform/chrome: chromeos_tbmc - add SPDX identifier
platform: chrome: Add Tablet Switch ACPI driver
platform/chrome: cros_ec_lpc: do not try DMI match when ACPI device found
Move to_cros_ec_dev macro to cros_ec.h and use it when the private ec
object is needed from device object.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Celes has newer touch controller (compared to the controllers used in
older BayTrail-based devices) and so uses the same button mapping as
Samus.
This fixes the issue with mouse button being stuck in pressed state
after the first click.
Reported-by: Sultan Alsawaf <sultanxda@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
We should stop our worker thread while we're suspended. If we don't
then we'll get messages like:
cros-ec-spi spi5.0: spi transfer failed: -108
cros-ec-spi spi5.0: cs-deassert spi transfer failed: -108
cros-ec-ctl cros-ec-ctl.0.auto: EC communication failed
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
BayTrail-based and newer Chromebooks describe their peripherals in ACPI;
unfortunately their description is not complete, and peripherals
drivers, such as driver for Atmel Touch controllers, has to resort to
DMI-matching to configure the peripherals properly. To avoid polluting
peripheral driver code, let's teach chromeos_laptop driver to supply
missing data via generic device properties.
Note we supply "compatible" string for Atmel peripherals not because it is
needed for matching devices and driver (matching is still done on ACPI HID
entries), but because peripherals driver will be using presence of
"compatible" property to determine if device properties have been attached
to the device, and fail to bind if they are absent.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Replace the original license statement with the SPDX identifier.
Add also one line of description as recommended by the COPYING file.
Signed-off-by: Benson Leung <bleung@chromium.org>
Add a kernel driver for GOOG0006, an ACPI driver reporting an event when
the tablet switch status changes.
On an ACPI based convertible chromebook check evtest display tablet mode
switch changes:
Available devices:
..
/dev/input/event3: Tablet Mode Switch
..
Testing ... (interrupt to exit)
Event: time 1484879712.604360, type 5 (EV_SW), code 1 (SW_TABLET_MODE),
value 1
Event: time 1484879712.604360, -------------- SYN_REPORT ------------
Event: time 1484879715.132228, type 5 (EV_SW), code 1 (SW_TABLET_MODE),
value 0
Event: time 1484879715.132228, -------------- SYN_REPORT ------------
...
Check state is updated at resume time when different from suspend time.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
Commit 001dde9400 ("mfd: cros ec: spi: Fix "in progress" error
signaling") pointed out some bad code, but its analysis and conclusion
was not 100% correct.
It *is* correct that we should not propagate result==EC_RES_IN_PROGRESS
for transport errors, because this has a special meaning -- that we
should follow up with EC_CMD_GET_COMMS_STATUS until the EC is no longer
busy. This is definitely the wrong thing for many commands, because
among other problems, EC_CMD_GET_COMMS_STATUS doesn't actually retrieve
any RX data from the EC, so commands that expected some data back will
instead start processing junk.
For such commands, the right answer is to either propagate the error
(and return that error to the caller) or resend the original command
(*not* EC_CMD_GET_COMMS_STATUS).
Unfortunately, commit 001dde9400 forgets a crucial point: that for
some long-running operations, the EC physically cannot respond to
commands any more. For example, with EC_CMD_FLASH_ERASE, the EC may be
re-flashing its own code regions, so it can't respond to SPI interrupts.
Instead, the EC prepares us ahead of time for being busy for a "long"
time, and fills its hardware buffer with EC_SPI_PAST_END. Thus, we
expect to see several "transport" errors (or, messages filled with
EC_SPI_PAST_END). So we should really translate that to a retryable
error (-EAGAIN) and continue sending EC_CMD_GET_COMMS_STATUS until we
get a ready status.
IOW, it is actually important to treat some of these "junk" values as
retryable errors.
Together with commit 001dde9400, this resolves bugs like the
following:
1. EC_CMD_FLASH_ERASE now works again (with commit 001dde9400, we
would abort the first time we saw EC_SPI_PAST_END)
2. Before commit 001dde9400, transport errors (e.g.,
EC_SPI_RX_BAD_DATA) seen in other commands (e.g.,
EC_CMD_RTC_GET_VALUE) used to yield junk data in the RX buffer; they
will now yield -EAGAIN return values, and tools like 'hwclock' will
simply fail instead of retrieving and re-programming undefined time
values
Fixes: 001dde9400 ("mfd: cros ec: spi: Fix "in progress" error signaling")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Older models of Chromebooks did not describe the LPC EC in their ACPI
tables; starting with Strago-based devices Google is using GOOG0004 device
to describe EC LPC.
DMI-based match is fragile and does not work reliably, especially when
using custom firmware. It is also not needed when we can locate the right
ACPI device, so let's stop bailing out when DMI does not match but the
right ACPI device is present.
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
This adds a sysfs attribute (/sys/class/chromeos/cros_ec/kb_wake_angle)
used to set and get the keyboard wake lid angle. This attribute is
present only if 2 accelerometers are controlled by the EC.
This patch also moves the cros_ec features check before the device is
added so the features map obtained from the EC is ready on time.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
Add info useful for debugging USB-PD port state.
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
Fixed the following checkpatch warning:
WARNING: Symbolic permissions 'S_IRUGO' are not preferred. Consider
using octal permissions '0444'.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Use DEVICE_ATTR variants for read/write attributes. This simplifies the
source code, improves readbility, and reduces the chance of
inconsistencies.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Add a define to get the cros_ec_dev from device and use it.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
When accessing a sysfs attribute, if the EC command fails, -EPROTO is
now returned instead of an error message as it is unlikely an app is
parsing the error message to do something meaningful.
Also, this patch makes use of cros_ec_cmd_xfer_status() instead of
cros_ec_cmd_xfer() so an error message is printed in the syslog.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
This patch adds generic device information to the DMI table of
the cros_ec_lpc driver, needed for Chromebooks/boxes using a
custom coreboot firmware.
The DMI info would not contain "Google_*" as BIOS version string,
instead the system vendor string would still be "GOOGLE", so this
seems to be a reasonable match for every Chromebook/box running
a custom firmware.
Signed-off-by: Salvatore Bellizzi <lkml@seppia.net>
Signed-off-by: Vittorio Gambaletta <linuxbugs@vittgam.net>
Signed-off-by: Benson Leung <bleung@chromium.org>
Chrome platform installed a Chrome EC notify handler which prevents
default EC GPE handler getting called. Add pm_system_wakeup to the
Chrome EC notify handler so wake up from s2idle can happen.
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Wenkai Du <wenkai.du@intel.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Mark board data as __intconst/__initdata and make a copy of appropriate
entry once we identified the board we are running on. The rest of the data
will be discarded once the kernel finished booting (or module finished
loading).
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Now that Atmel driver uses generic device properties we can use them
instead of platform data when setting up touchpad on the original
Google Pixel.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Instead of passing interrupt flags via platform data to drivers, or
hoping that drivers will do the right thing and set it up the way we
need, let's set up IRQ resource and attach it to the I2C board info, and
let I2C core set it up for us.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Instead of using platform device and deferrals to handle the case when i2C
adapters appear late in the game, and not handling device unbinding all
that well, let's switch to using I2C bus notifier to get told when a new
I2C adapter appears in the system, and attempt to add appropriate devices
at that time.
In case when we have 2 Designware adapters in the system (Acer C720),
instead of counting and hoping they get enumerate din the right order,
let's switch to using their PCI devids (slot/function) that should be
stable.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Instead of trying to parse DMI IRQ data every time we try to instantiate a
device, let's do it once, when we identify the device we are working with.
This allows us to mark chromeos_laptop_get_irq_from_dmi() as __init and
discard it once module is initialized.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Instead of having separate setup() functions responsible for instantiating
i2c client for each peripheral, let's generalize the behavior and use
common code for instantiating all i2c peripherals.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
This will make code instantiating I2C device a bit clearer.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Replace the original license statement with the SPDX identifier.
Add also one line of description as recommended by the COPYING file.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
This reverts commit a376cd9160 because
chromeos_laptop instances should not be marked as "const" (at this
time), since i2c_peripheral is being modified (we change "state" and
"tries") when we instantiate devices.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:
for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
done
with de-mangling cleanups yet to come.
NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do. But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.
The next patch from Al will sort out the final differences, and we
should be all done.
Scripted-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Moving cros_ec_dev to drivers/mfd.
Other small maintenance fixes.
-----BEGIN PGP SIGNATURE-----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=YEO6
-----END PGP SIGNATURE-----
Merge tag 'chrome-platform-for-linus-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform
Pull chrome platform updates from Benson Leung:
- move cros_ec_dev to drivers/mfd
- other small maintenance fixes
[ The cros_ec_dev movement came in earlier through the MFD tree - Linus ]
* tag 'chrome-platform-for-linus-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform:
platform/chrome: Use proper protocol transfer function
platform/chrome: cros_ec_lpc: Add support for Google Glimmer
platform/chrome: cros_ec_lpc: Register the driver if ACPI entry is missing.
platform/chrome: cros_ec_lpc: remove redundant pointer request
cros_ec: fix nul-termination for firmware build info
platform/chrome: chromeos_laptop: make chromeos_laptop const
Pull poll annotations from Al Viro:
"This introduces a __bitwise type for POLL### bitmap, and propagates
the annotations through the tree. Most of that stuff is as simple as
'make ->poll() instances return __poll_t and do the same to local
variables used to hold the future return value'.
Some of the obvious brainos found in process are fixed (e.g. POLLIN
misspelled as POLL_IN). At that point the amount of sparse warnings is
low and most of them are for genuine bugs - e.g. ->poll() instance
deciding to return -EINVAL instead of a bitmap. I hadn't touched those
in this series - it's large enough as it is.
Another problem it has caught was eventpoll() ABI mess; select.c and
eventpoll.c assumed that corresponding POLL### and EPOLL### were
equal. That's true for some, but not all of them - EPOLL### are
arch-independent, but POLL### are not.
The last commit in this series separates userland POLL### values from
the (now arch-independent) kernel-side ones, converting between them
in the few places where they are copied to/from userland. AFAICS, this
is the least disruptive fix preserving poll(2) ABI and making epoll()
work on all architectures.
As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and
it will trigger only on what would've triggered EPOLLWRBAND on other
architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered
at all on sparc. With this patch they should work consistently on all
architectures"
* 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits)
make kernel-side POLL... arch-independent
eventpoll: no need to mask the result of epi_item_poll() again
eventpoll: constify struct epoll_event pointers
debugging printk in sg_poll() uses %x to print POLL... bitmap
annotate poll(2) guts
9p: untangle ->poll() mess
->si_band gets POLL... bitmap stored into a user-visible long field
ring_buffer_poll_wait() return value used as return value of ->poll()
the rest of drivers/*: annotate ->poll() instances
media: annotate ->poll() instances
fs: annotate ->poll() instances
ipc, kernel, mm: annotate ->poll() instances
net: annotate ->poll() instances
apparmor: annotate ->poll() instances
tomoyo: annotate ->poll() instances
sound: annotate ->poll() instances
acpi: annotate ->poll() instances
crypto: annotate ->poll() instances
block: annotate ->poll() instances
x86: annotate ->poll() instances
...
pkt_xfer should be used for protocol v3, and cmd_xfer otherwise. We had
one instance of these functions correct, but not the second, fall-back
case. We use the fall-back only when the first command returns an
IN_PROGRESS status, which is only used on some EC firmwares where we
don't want to constantly poll the bus, but instead back off and
sleep/retry for a little while.
Fixes: 2c7589af3c ("mfd: cros_ec: add proto v3 skeleton")
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
This patch adds device information to the DMI table of the cros_ec_lpc
driver for Google Glimmer devices. Since Google BIOS does not enumerate
devices in the LPC bus, the cros_ec_lpc driver checks for system
compatibility and registers the cros_ec device itself.
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
Commit 12278dc7c5 ("platform/chrome: cros_ec_lpc: Add support for
GOOG004 ACPI device") added support when the firmware reports the ACPI
device, there are some firmwares though that doesn't report this device
but have it. In such cases we need to instantiate the driver explicitly
if it is not instantiated through ACPI.
Fixes: 12278dc7c5 ("platform/chrome: cros_ec_lpc: Add support for GOOG004 ACPI device")
Signed-off-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
Pointer request is being assigned but never used, so remove it. Cleans
up the clang warning:
drivers/platform/chrome/cros_ec_lpc.c:68:2: warning: Value stored to
'request' is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
As gcc-8 reports, we zero out the wrong byte:
drivers/platform/chrome/cros_ec_sysfs.c: In function 'show_ec_version':
drivers/platform/chrome/cros_ec_sysfs.c:190:12: error: array subscript 4294967295 is above array bounds of 'uint8_t[]' [-Werror=array-bounds]
This changes the code back to what it did before changing to a
zero-length array structure.
Fixes: a841178445 ("mfd: cros_ec: Use a zero-length array for command data")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Benson Leung <bleung@chromium.org>
Declare chromeos_laptop structures as const as they are only used during
a copy operation. As their value is never modified during runtime, they
can be made const.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
The cros_ec_dev module is responsible for registering the MFD devices
attached to the ChromeOS EC. This patch moves this module to drivers/mfd
so calls to mfd_add_devices() are not done from outside the MFD subtree
anymore.
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Tested-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This patch splits the cros_ec_devs module in two parts with a
cros_ec_dev module responsible for handling MFD devices registration and
a cros_ec_ctl module responsible for handling the various user-space
interfaces.
For consistency purpose, the driver name for the cros_ec_dev module is
now cros-ec-dev instead of cros-ec-ctl.
In the next commit, the new cros_ec_dev module will be moved to the MFD
subtree so mfd_add_devices() calls are not done from outside MFD.
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Tested-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
... and __initconst if applicable.
Based on similar work for an older kernel in the Grsecurity patch.
[JD: fix toshiba-wmi build]
[JD: add htcpen]
[JD: move __initconst where checkscript wants it]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
The only reference to the new functions is inside of an #ifdef,
which now causes a harmless warning when CONFIG_PM_SLEEP is not set:
chrome/cros_ec_dev.c:478:12: error: 'ec_device_resume' defined but not used [-Werror=unused-function]
chrome/cros_ec_dev.c:469:12: error: 'ec_device_suspend' defined but not used [-Werror=unused-function]
This marks the two functions as __maybe_unused so they can get
silently dropped by the compiler.
Fixes: 405c84308c ("platform/chrome: cros_ec_lightbar - Control of suspend/resume lightbar sequence")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
The subset of wake-enabled host events is defined by the EC, but the EC
may still send non-wake host events if we're in the process of
suspending. Get the mask of wake-enabled host events from the EC and
filter out non-wake events to prevent spurious aborted suspend
attempts.
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
When the EC is not responsive at probe, we try to get basic information
(protocol to use) later on through cros_xfer_cmd() call.
This patch makes sure there is no deadlock when re-probing the EC by
replacing call to cros_xfer_cmd() with send_command() in the function
cros_ec_get_host_command_version_mask(). Also, this patch adds the
function header indicating it must be called protected.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
With this patch, cros_ec_query_all() does not return an error if it
fails to check for MKBP events support. Instead, the EC device structure
indicates that it does not support MKBP events (mkbp_event_supported
field) and cros_ec_query_all() returns 0.
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
A Mutex lock in cros_ec_cmd_xfer which may be held by frozen
Userspace thread during system suspending. So should not
call this routine in suspend thread.
Signed-off-by: Jeffery Yu <jefferyy@nvidia.com>
Signed-off-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Some devices might want to turn off the lightbar if e.g. the
system turns the screen off due to idleness. This prevents the
kernel from going through its normal suspend/resume pathways.
Signed-off-by: Eric Caruso <ejcaruso@chromium.org>
Signed-off-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Don't let EC control suspend/resume sequence. If the EC controls the
lightbar and sets the sequence when it notices the chipset transitioning
between states, we can't make exceptions for cases where we don't want
to activate the lightbar. Instead, let's move the suspend/resume
notifications into the kernel so we can selectively play the sequences.
Signed-off-by: Eric Caruso <ejcaruso@chromium.org>
Signed-off-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
Nick Crews