We missed to add document for inline_xattr_size mount option in f2fs.txt,
add it.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Note that, it requires "f2fs: return correct errno in f2fs_gc".
This adds a lightweight non-persistent snapshotting scheme to f2fs.
To use, mount with the option checkpoint=disable, and to return to
normal operation, remount with checkpoint=enable. If the filesystem
is shut down before remounting with checkpoint=enable, it will revert
back to its apparent state when it was first mounted with
checkpoint=disable. This is useful for situations where you wish to be
able to roll back the state of the disk in case of some critical
failure.
Signed-off-by: Daniel Rosenberg <drosen@google.com>
[Jaegeuk Kim: use SB_RDONLY instead of MS_RDONLY]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds to support injecting error for write IO, this can simulate
IO error like fail_make_request or dm_flakey does.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previously, once fault injection is on, by default, all kind of faults
will be injected to f2fs, if we want to trigger single or specified
combined type during the test, we need to configure sysfs entry, it will
be a little inconvenient to integrate sysfs configuring into testsuit,
such as xfstest.
So this patch introduces a new mount option 'fault_type' to assist old
option 'fault_injection', with these two mount options, we can specify
any fault rate/type at mount-time.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
For non-atomic files, this patch adds an option to give nobarrier which
doesn't issue flush commands to the device.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduces a new mount option `test_dummy_encryption'
to allow fscrypt to create a fake fscrypt context. This is used
by xfstests.
Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Commit "0a007b97aad6"(f2fs: recover directory operations by fsync)
fixed xfstest generic/342 case, but it also increased the written
data and caused the performance degradation. In most cases, there's
no need to do so heavy fsync actually.
So we introduce new mount option "fsync_mode={posix,strict}" to
control the policy of fsync. "fsync_mode=posix" is set by default,
and means that f2fs uses a light fsync, which follows POSIX semantics.
And "fsync_mode=strict" means that it's a heavy fsync, which behaves
in line with xfs, ext4 and btrfs, where generic/342 will pass, but
the performance will regress.
Signed-off-by: Junling Zheng <zhengjunling@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds an mount option, "alloc_mode=%s" having two options, "default"
and "reuse".
In "alloc_mode=reuse" case, f2fs starts to allocate segments from 0'th segment
all the time to reassign segments. It'd be useful for small-sized eMMC parts.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch supports to enable f2fs to accept quota information through
mount option:
- {usr,grp,prj}jquota=<quota file path>
- jqfmt=<quota type>
Then, in ->mount flow, we can recover quota file during log replaying,
by this, journelled quota can be supported.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: Fix wrong return values.]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds a sysfs entry to control urgent mode for background GC.
If this is set, background GC thread conducts GC with gc_urgent_sleep_time
all the time.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds to support plain user/group quota.
Change Note by Jaegeuk Kim.
- Use f2fs page cache for quota files in order to consider garbage collection.
so, quota files are not tolerable for sudden power-cuts, so user needs to do
quotacheck.
- setattr() calls dquot_transfer which will transfer inode->i_blocks.
We can't reclaim that during f2fs_evict_inode(). So, we need to count
node blocks as well in order to match i_blocks with dquot's space.
Note that, Chao wrote a patch to count inode->i_blocks without inode block.
(f2fs: don't count inode block in in-memory inode.i_blocks)
- in f2fs_remount, we need to make RW in prior to dquot_resume.
- handle fault_injection case during f2fs_quota_off_umount
- TODO: Project quota
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Commit 73faec4d99 ("f2fs: add mount option to select fault injection
ratio") and Commit 087968974f ("f2fs: add fault injection to sysfs")
forget to document mount option and sysfs file.
This patch fixes to document them.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduces new mount option 'noinline_xattr', so we can disable
inline xattr functionality which is already set as a default mount option.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
There is a typo "f2f2" in f2fs.txt, this patch fixes it.
Signed-off-by: Tiezhu Yang <kernelpatch@126.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Make inline_dentry as default mount option to improve space usage and
IO performance in scenario of numerous small directory.
It adds noinline_dentry mount option, instead.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This mount option is to enable original log-structured filesystem forcefully.
So, there should be no random writes for main area.
Especially, this supports host-managed SMR device.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Add a new option 'data_flush' to enable data flush functionality.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch fix some typos in Documentation/filesystems/f2fs.txt
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Enable inline_data feature by default since it brings us better
performance and space utilization and now has already stable.
Add another option noinline_data to disable it during mount.
Suggested-by: Jaegeuk Kim <jaegeuk@kernel.org>
Suggested-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds a mount option 'extent_cache' in f2fs.
It is try to use a rb-tree based extent cache to cache more mapping information
with less memory if this option is set, otherwise we will use the original one
extent info cache.
Suggested-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduces a batched trimming feature, which submits split discard
commands.
This is to avoid long latency due to huge trim commands.
If fstrim was triggered ranging from 0 to the end of device, we should lock
all the checkpoint-related mutexes, resulting in very long latency.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds a mount option, norecovery, which is mostly same as
disable_roll_forward. The only difference is that norecovery should be activated
with read-only mount option.
This can be used when user wants to check whether f2fs is mountable or not
without any recovery process. (e.g., xfstests/200)
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If a system wants to reduce the booting time as a top priority, now we can
use a mount option, -o fastboot.
With this option, f2fs conducts a little bit slow write_checkpoint, but
it can avoid the node page reads during the next mount time.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds descriptions for the inline dir support in f2fs document.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch changes the ipu_policy setting to use any combination of orthogonal policies.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If user wrote F2FS_IPU_FSYNC:4 in /sys/fs/f2fs/ipu_policy, f2fs_sync_file
only starts to try in-place-updates.
And, if the number of dirty pages is over /sys/fs/f2fs/min_fsync_blocks, it
keeps out-of-order manner. Otherwise, it triggers in-place-updates.
This may be used by storage showing very high random write performance.
For example, it can be used when,
Seq. writes (Data) + wait + Seq. writes (Node)
is pretty much slower than,
Rand. writes (Data)
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds a mount option, nobarrier, in f2fs.
The assumption in here is that file system keeps the IO ordering, but
doesn't care about cache flushes inside the storages.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When large directory feathure is enable, We have one case which could cause
overflow in dir_buckets() as following:
special case: level + dir_level >= 32 and level < MAX_DIR_HASH_DEPTH / 2.
Here we define MAX_DIR_BUCKETS to limit the return value when the condition
could trigger potential overflow.
Changes from V1
o modify description of calculation in f2fs.txt suggested by Changman Lee.
Suggested-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Some storage devices show relatively high latencies to complete cache_flush
commands, even though their normal IO speed is prettry much high. In such
the case, it needs to merge cache_flush commands as much as possible to avoid
issuing them redundantly.
So, this patch introduces a mount option, "-o flush_merge", to mitigate such
the overhead.
If this option is enabled by user, F2FS merges the cache_flush commands and then
issues just one cache_flush on behalf of them. Once the single command is
finished, F2FS sends a completion signal to all the pending threads.
Note that, this option can be used under a workload consisting of very intensive
concurrent fsync calls, while the storage handles cache_flush commands slowly.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
It is more reasonable to determine the reclaiming rate of prefree segments
according to the volume size, which is set to 5% by default.
For example, if the volume is 128GB, the prefree segments are reclaimed
when the number reaches to 6.4GB.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch introduces ram_thresh, a sysfs entry, which controls the memory
footprint used by the free nid list and the nat cache.
Previously, the free nid list was controlled by MAX_FREE_NIDS, while the nat
cache was managed by NM_WOUT_THRESHOLD.
However, this approach cannot be applied dynamically according to the system.
So, this patch adds ram_thresh that users can specify the threshold, which is
in order of 1 / 1024.
For example, if the total ram size is 4GB and the value is set to 10 by default,
f2fs tries to control the number of free nids and nat caches not to consume over
10 * (4GB / 1024) = 10MB.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch adds an sysfs entry to control dir_level used by the large directory.
The description of this entry is:
dir_level This parameter controls the directory level to
support large directory. If a directory has a
number of files, it can reduce the file lookup
latency by increasing this dir_level value.
Otherwise, it needs to decrease this value to
reduce the space overhead. The default value is 0.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch introduces an i_dir_level field to support large directory.
Previously, f2fs maintains multi-level hash tables to find a dentry quickly
from a bunch of chiild dentries in a directory, and the hash tables consist of
the following tree structure as below.
In Documentation/filesystems/f2fs.txt,
----------------------
A : bucket
B : block
N : MAX_DIR_HASH_DEPTH
----------------------
level #0 | A(2B)
|
level #1 | A(2B) - A(2B)
|
level #2 | A(2B) - A(2B) - A(2B) - A(2B)
. | . . . .
level #N/2 | A(2B) - A(2B) - A(2B) - A(2B) - A(2B) - ... - A(2B)
. | . . . .
level #N | A(4B) - A(4B) - A(4B) - A(4B) - A(4B) - ... - A(4B)
But, if we can guess that a directory will handle a number of child files,
we don't need to traverse the tree from level #0 to #N all the time.
Since the lower level tables contain relatively small number of dentries,
the miss ratio of the target dentry is likely to be high.
In order to avoid that, we can configure the hash tables sparsely from level #0
like this.
level #0 | A(2B) - A(2B) - A(2B) - A(2B)
level #1 | A(2B) - A(2B) - A(2B) - A(2B) - A(2B) - ... - A(2B)
. | . . . .
level #N/2 | A(2B) - A(2B) - A(2B) - A(2B) - A(2B) - ... - A(2B)
. | . . . .
level #N | A(4B) - A(4B) - A(4B) - A(4B) - A(4B) - ... - A(4B)
With this structure, we can skip the ineffective tree searches in lower level
hash tables.
This patch adds just a facility for this by introducing i_dir_level in
f2fs_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch adds missing some description of sysfs entries in
- Documentation/ABI/testing/sysfs-fs-f2fs
- Documentation/filesystems/f2fs.txt.
And it adds a maintained document entry of F2FS in MAINTAINERS.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch describes the inline_data support in f2fs document.
Signed-off-by: Huajun Li <huajun.li@intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch introduces new sysfs entries for users to control the policy of
in-place-updates, namely IPU, in f2fs.
Sometimes f2fs suffers from performance degradation due to its out-of-place
update policy that produces many additional node block writes.
If the storage performance is very dependant on the amount of data writes
instead of IO patterns, we'd better drop this out-of-place update policy.
This patch suggests 5 polcies and their triggering conditions as follows.
[sysfs entry name = ipu_policy]
0: F2FS_IPU_FORCE all the time,
1: F2FS_IPU_SSR if SSR mode is activated,
2: F2FS_IPU_UTIL if FS utilization is over threashold,
3: F2FS_IPU_SSR_UTIL if SSR mode is activated and FS utilization is over
threashold,
4: F2FS_IPU_DISABLE disable IPU. (=default option)
[sysfs entry name = min_ipu_util]
This parameter controls the threshold to trigger in-place-updates.
The number indicates percentage of the filesystem utilization, and used by
F2FS_IPU_UTIL and F2FS_IPU_SSR_UTIL policies.
For more details, see need_inplace_update() in segment.h.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch adds a control method in sysfs to reclaim prefree segments.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Add sysfs entry gc_idle to control the gc policy. Where
gc_idle = 1 corresponds to selecting a cost benefit approach,
while gc_idle = 2 corresponds to selecting a greedy approach
to garbage collection. The selection is mutually exclusive one
approach will work at any point. If gc_idle = 0, then this
option is disabled.
Cc: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Pankaj Kumar <pankaj.km@samsung.com>
Reviewed-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
[Jaegeuk Kim: change the select_gc_type() flow slightly]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Add sysfs entries to control the timing parameters for
f2fs gc thread.
Various Sysfs options introduced are:
gc_min_sleep_time: Min Sleep time for GC in ms
gc_max_sleep_time: Max Sleep time for GC in ms
gc_no_gc_sleep_time: Default Sleep time for GC in ms
Cc: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Pankaj Kumar <pankaj.km@samsung.com>
Reviewed-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
[Jaegeuk Kim: fix an umount bug and some minor changes]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch adds some description on fsck.f2fs and dump.f2fs which is
recently merged into f2fs-tools.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Add the f2fs_remount function call which will be used
during the filesystem remounting. This function
will help us to change the mount options specific to
f2fs.
Also modify the f2fs background_gc mount option, which
will allow the user to dynamically trun on/off the
garbage collection in f2fs based on the background_gc
value. If background_gc=on, Garbage collection will
be turned off & if background_gc=off, Garbage collection
will be truned on.
By default the garbage collection is on in f2fs.
Change Log:
v2: Incorporated the review comments by Gu Zheng.
Removing the restore part for VFS flags
Updating comments with proper flag conditions
Display GC background option as ON/OFF
Revised conditions to stop GC in case of remount
v1: Initial changes for adding remount_fs callback
support.
Cc: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Pankaj Kumar <pankaj.km@samsung.com>
Reviewed-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
[Jaegeuk Kim: change /** with /* for the coding style]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Chao Yu