This patch is based on patch from Steve Magnani.
There were bug for compiled-in rootfs. We have to move
moving rootfs which is in BSS section to _ebss section
which is at the end of kernel and then clear bss section
not vice-versa.
Signed-off-by: Michal Simek <monstr@monstr.eu>
This patch fixed parsing early parameters because
current implementation does that early parse DTS
command line and then parse CMDLINE line which is compiled-in.
For case that DTS doesn't contain command line is
copied command line from kernel with is done in prom.c
that's why I can remove it from machine_early_init.
Signed-off-by: Michal Simek <monstr@monstr.eu>
A polarity reversal in the __KERNEL__ guard prevents the __HAVE_ARCH
flags from being defined in kernel compilation.
I noticed that there's now an option for assembly-optimized versions of
memcpy and memmove. I believe this may be buggy; when I turn it on, all
my printk output gets smashed together, as if the newlines aren't getting
copied.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
Extra LDFLAGS from user space building may cause kernel failed
to compile.
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Michal Simek <monstr@monstr.eu>
This patch fix problem with bad zone initialization.
This bug wasn't perform because Microblaze doesn't
define CONFIG_ZONE_DMA and ZONE_NORMAL was 0 for this case
that's why free_area_init works with correct values.
Original message:
I believe that the switch from ZONE_DMA (== 0) to ZONE_NORMAL
broke the free area initialization.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
Microblaze does not support the Linux DMA mapping API
at this point, so disable CONFIG_NO_DMA. This lets
us use the generic dma-mapping-broken.h implementation
instead of providing a different copy.
Any drivers that try to use DMA mapping now get
omitted from Kconfig or produce a link error, rather
than failing silently at run time.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Simek <monstr@monstr.eu>
We need to define set_restore_sigmask() in order to
get pselect and ppoll. Also, the setup_frame function
can not be used when __NR_sigreturn is not defined.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Simek <monstr@monstr.eu>
This changes the function prototypes in the checksum code
to have the usual prototypes, typically by turning int
arguments into __wsum.
Also change csum_partial_copy_from_user() to operate
on the right address space and export ip_fast_csum,
which is used in modular networking code.
The new version is now sparse-clean including endianess
checks.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Simek <monstr@monstr.eu>
This function was actually causing harm, by hiding
errors about invalid sized get_user/put_user accesses.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Simek <monstr@monstr.eu>
linux/types.h breaks the uclibc build, so don't
include it here.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Simek <monstr@monstr.eu>
Some device drivers call this, so add a macro
that pretends to do this. Since there is no
MMU support, it won't actually result in an
uncached mapping, though.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Simek <monstr@monstr.eu>
The security subsystem has its own initcalls, which
need support in vmlinux.lds.S.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Simek <monstr@monstr.eu>
This function is neither declared nor used anywhere
outside of ppc32, so remove it from microblaze.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Simek <monstr@monstr.eu>
The whole point of the __bad_xchg declaration in
system.h is to give a linker error when a variable
of invalid size is passed to __xchg. The out
of line definition in traps.c defeats this purpose
and does not any value, so remove it here.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Simek <monstr@monstr.eu>
The microblaze signal handling code gets some __user
pointers wrong, as shown by sparse.
This adds the annotations where appropriate and
change sys_rt_sigreturn to correctly pass a user
stack down to do_sigaltstack instead of a kernel
structure.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Simek <monstr@monstr.eu>
Some device drivers require the symbols _ebss, kernel_thread,
__page_offset or ___range_ok, so export them.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Simek <monstr@monstr.eu>
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
MIPS: 64-bit: Fix system lockup.
MIPS: IP28: Change to build with -mr10k-cache-barrier=store
MIPS: IP22: Fix hang in power button interrupt handler
MIPS: IP32: Fix hang on shutdown in power button interrupt handler.
The address range size calculation inside local_flush_tlb_kernel_range()
is being truncated by a too small size variable holder on 64-bit systems.
The truncated size can result in an erroneous tlbsize check that means we
sit spinning inside a loop trying to flush a hige number of TLB entries.
This is for all intents and purposes a system hang. Fix by using an
appropriately sized valiable to hold the size.
[Ralf: Greg's original patch submission identified the issue and fixed one
instance in tlb-r4k.c but there there were several more. For consistency
I also modified tlb-r3k.c even though that file is only used on 32-bit.]
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Richard Sandiford's new code for inserting the cache-barriers, for GCC
4.3 and above and already incorporated in the current GCC-release, uses
a slightly different option-syntax.
Signed-off-by: peter fuerst <post@pfrst.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The hang was caused by the use of disable_irq() from the interrupt handler
itself. Fixed by the use of disable_irq_nosync(). The issue was
triggered by:
commit 3aa551c9b4
Author: Thomas Gleixner <tglx@linutronix.de>
Date: Mon Mar 23 18:28:15 2009 +0100
genirq: add threaded interrupt handler support
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The hang was caused by the use of disable_irq() from the interrupt handler
itself. Fixed by the use of disable_irq_nosync(). The issue was
triggered by:
commit 3aa551c9b4
Author: Thomas Gleixner <tglx@linutronix.de>
Date: Mon Mar 23 18:28:15 2009 +0100
genirq: add threaded interrupt handler support
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* 'fixes-for-linus' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: Fix kind-of-intr checking against number of interrupts
microblaze: Update Microblaze defconfig
Michal Simek