DisplayID blocks allow embedding of CEA blocks. The payloads are
identical to traditional top level CEA extension blocks, but the header
is slightly different.
This change allows the CEA parser to find a CEA block inside a DisplayID
block. Additionally, it adds support for parsing the embedded CTA
header. No further changes are necessary due to payload parity.
This change fixes audio support for the Valve Index HMD.
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.15
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190619180901.17901-1-andresx7@gmail.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl0Gj1MeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGctkH/0At3+SQPY2JJSy8
i6+TDeytFx9OggeGLPHChRfehkAlvMb/kd34QHnuEvDqUuCAMU6HZQJFKoK9mvFI
sDJVayPGDSqpm+iv8qLpMBPShiCXYVnGZeVfOdv36jUswL0k6wHV1pz4avFkDeZa
1F4pmI6O2XRkNTYQawbUaFkAngWUCBG9ECLnHJnuIY6ohShBvjI4+E2JUaht+8gO
M2h2b9ieddWmjxV3LTKgsK1v+347RljxdZTWnJ62SCDSEVZvsgSA9W2wnebVhBkJ
drSmrFLxNiM+W45mkbUFmQixRSmjv++oRR096fxAnodBxMw0TDxE1RiMQWE6rVvG
N6MC6xA=
=+B0P
-----END PGP SIGNATURE-----
Merge v5.2-rc5 into drm-next
Maarten needs -rc4 backmerged so he can pull in the fbcon notifier
removal topic branch into drm-misc-next.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We've moved the override and firmware EDID (simply "override EDID" from
now on) handling to the low level drm_do_get_edid() function in order to
transparently use the override throughout the stack. The idea is that
you get the override EDID via the ->get_modes() hook.
Unfortunately, there are scenarios where the DDC probe in drm_get_edid()
called via ->get_modes() fails, although the preceding ->detect()
succeeds.
In the case reported by Paul Wise, the ->detect() hook,
intel_crt_detect(), relies on hotplug detect, bypassing the DDC. In the
case reported by Ilpo Järvinen, there is no ->detect() hook, which is
interpreted as connected. The subsequent DDC probe reached via
->get_modes() fails, and we don't even look at the override EDID,
resulting in no modes being added.
Because drm_get_edid() is used via ->detect() all over the place, we
can't trivially remove the DDC probe, as it leads to override EDID
effectively meaning connector forcing. The goal is that connector
forcing and override EDID remain orthogonal.
Generally, the underlying problem here is the conflation of ->detect()
and ->get_modes() via drm_get_edid(). The former should just detect, and
the latter should just get the modes, typically via reading the EDID. As
long as drm_get_edid() is used in ->detect(), it needs to retain the DDC
probe. Or such users need to have a separate DDC probe step first.
The EDID caching between ->detect() and ->get_modes() done by some
drivers is a further complication that prevents us from making
drm_do_get_edid() adapt to the two cases.
Work around the regression by falling back to a separate attempt at
getting the override EDID at drm_helper_probe_single_connector_modes()
level. With a working DDC and override EDID, it'll never be called; the
override EDID will come via ->get_modes(). There will still be a failing
DDC probe attempt in the cases that require the fallback.
v2:
- Call drm_connector_update_edid_property (Paul)
- Update commit message about EDID caching (Daniel)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107583
Reported-by: Paul Wise <pabs3@bonedaddy.net>
Cc: Paul Wise <pabs3@bonedaddy.net>
References: http://mid.mail-archive.com/alpine.DEB.2.20.1905262211270.24390@whs-18.cs.helsinki.fi
Reported-by: Ilpo Järvinen <ilpo.jarvinen@cs.helsinki.fi>
Cc: Ilpo Järvinen <ilpo.jarvinen@cs.helsinki.fi>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
References: 15f080f08d ("drm/edid: respect connector force for drm_get_edid ddc probe")
Fixes: 53fd40a90f ("drm: handle override and firmware EDID at drm_do_get_edid() level")
Cc: <stable@vger.kernel.org> # v4.15+ 56a2b7f2a3 drm/edid: abstract override/firmware EDID retrieval
Cc: <stable@vger.kernel.org> # v4.15+
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harish Chegondi <harish.chegondi@intel.com>
Tested-by: Paul Wise <pabs3@bonedaddy.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610093054.28445-1-jani.nikula@intel.com
Abstract the debugfs override and the firmware EDID retrieval
function. We'll be needing it in the follow-up. No functional changes.
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Harish Chegondi <harish.chegondi@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Tested-by: Paul Wise <pabs3@bonedaddy.net>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190607110513.12072-1-jani.nikula@intel.com
From VESA EDID implementation guide v1.0:
"For EDID version 1 revision 2 or earlier data structures when offset 14h
bit 7 is set to one, the value of bits 6-0 are undefined, and therefore
cannot be interpreted to mean anything."
And since EDID 1.4 redefines that bit let's consult it only for
EDID 1.3.
Cc: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190529110204.2384-2-ville.syrjala@linux.intel.com
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Give the "DFP 1.x" bit a proper name, and clean up the rest
of the bits defines as well.
Cc: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190529110204.2384-1-ville.syrjala@linux.intel.com
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Fixes the following warnings:
../drivers/gpu/drm/drm_edid.c:4925: warning: Function parameter or member 'conn_state' not described in 'drm_hdmi_infoframe_set_hdr_metadata'
../drivers/gpu/drm/drm_edid.c:4925: warning: Excess function parameter 'hdr_metadata' description in 'drm_hdmi_infoframe_set_hdr_metadata'
Fixes: 2cdbfd66a8 ("drm: Enable HDR infoframe support")
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: Hans Verkuil <hansverk@cisco.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190523135504.184354-1-sean@poorly.run
ADD HLG EOTF to the list of EOTF transfer functions supported.
Hybrid Log-Gamma (HLG) is a high dynamic range (HDR) standard.
HLG defines a nonlinear transfer function in which the lower
half of the signal values use a gamma curve and the upper half
of the signal values use a logarithmic curve.
v2: Rebase
v3: Fixed a warning message
v4: Addressed Shashank's review comments
v5: Addressed Jonas Karlman's review comment and dropped the i915
tag from header.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1558015817-12025-8-git-send-email-uma.shankar@intel.com
Enable Dynamic Range and Mastering Infoframe for HDR
content, which is defined in CEA 861.3 spec.
The metadata will be computed based on blending
policy in userspace compositors and passed as a connector
property blob to driver. The same will be sent as infoframe
to panel which support HDR.
Added the const version of infoframe for DRM metadata
for HDR.
v2: Rebase and added Ville's POC changes.
v3: No Change
v4: Addressed Shashank's review comments and merged the
patch making drm infoframe function arguments as constant.
v5: Rebase
v6: Fixed checkpatch warnings with --strict option. Addressed
Shashank's review comments and added his RB.
v7: Addressed Brian Starkey's review comments. Merged 2 patches
into one.
v8: Addressed Jonas Karlman review comments.
v9: Addressed Jonas Karlman review comments.
v10: Addressed Ville's review comments.
v11: Added BUILD_BUG_ON and sizeof instead of magic numbers as
per Ville's comments.
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1558015817-12025-5-git-send-email-uma.shankar@intel.com
HDR metadata block is introduced in CEA-861.3 spec.
Parsing the same to get the panel's HDR metadata.
v2: Rebase and added Ville's POC changes to the patch.
v3: No Change
v4: Addressed Shashank's review comments
v5: Addressed Shashank's comment and added his RB.
v6: Addressed Jonas Karlman review comments.
v7: Adressed Ville's review comments and fixed the issue
with length handling.
v8: Put the length check as per the convention followed in
existing code, as suggested by Ville.
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1558015817-12025-4-git-send-email-uma.shankar@intel.com
Looks like EDID_QUIRK_FIRST_DETAILED_PREFERRED never did anything.
Its counterpart in f86EdidModes.c is properly hooked up but somehow
that functionality was lost when it was copied into the kernel.
The concensus seems to be that this quirk is a bit misguided
anyway so let's nuke the leftovers.
For posterity here are some links to known cases:
* Proview AY765C
https://bugs.freedesktop.org/show_bug.cgi?id=15160
* Unknown Acer
https://bugzilla.redhat.com/show_bug.cgi?id=284231 (got the
reference from xf86EdidModes.c)
* Peacock Ergovision 19 (only in xf86EdidModes.c)
https://bugzilla.redhat.com/show_bug.cgi?id=492359
* Philips 107p5 CRT
"Reported on xorg@ with pastebin", didn't find the mail(s)
Cc: Adam Jackson <ajax@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322174244.23945-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Add two EDID vendor/product pairs used across a variety of
Sensics products, as well as the OSVR HDK and HDK 2.
Signed-off-by: Ryan Pavlik <ryan.pavlik@collabora.com>
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20181203164644.13974-1-ryan.pavlik@collabora.com
Cc: <stable@vger.kernel.org> # v4.15+
This adds colorspace information to HDMI AVI infoframe.
A helper function is added to program the same.
v2: Moved this to drm core instead of i915 driver.
v3: Exported the helper function.
v4: Added separate HDMI specific macro as per CTA spec.
This is separate from user exposed enum values. This is
as per Ville's suggestion.
v5: Appended BT709 and SMPTE 170M with YCC information as per Ville's
review comment to be clear and not to be confused with RGB.
v6: Added bit wise macro for various fields of colorimetry for easier
understanding and review as per Ville's comments. Moved the same out of
header file to avoid any namespace issues.
v7: Undef some macros to avoid any namespace collision as suggested by
Ville. Added Ville's RB.
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1550596381-993-3-git-send-email-uma.shankar@intel.com
Move the CEA-861 QS bit handling entirely into the edid code. No
need to bother the drivers with this.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: Eric Anholt <eric@anholt.net> (supporter:DRM DRIVERS FOR VC4)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108172828.15184-4-ville.syrjala@linux.intel.com
Make life easier for drivers by simply passing the connector
to drm_hdmi_avi_infoframe_from_display_mode() and
drm_hdmi_avi_infoframe_quant_range(). That way drivers don't
need to worry about is_hdmi2_sink mess.
v2: Make is_hdmi2_sink() return true for sil-sii8620
Adapt to omap/vc4 changes
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108172828.15184-1-ville.syrjala@linux.intel.com
-----BEGIN PGP SIGNATURE-----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=5lmL
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2018-11-02' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Pretty much a normal fixes pull pre-rc1, mostly amdgpu fixes, one i915
link training regression fix, and a couple of minor panel/bridge fixes
and a panel quirk"
* tag 'drm-next-2018-11-02' of git://anongit.freedesktop.org/drm/drm: (37 commits)
drm/amdgpu: revert "enable gfxoff in non-sriov and stutter mode by default"
drm/amd/pp: Print warning if od_sclk/mclk out of range
drm/amd/pp: Fix pp_sclk/mclk_od not work on Vega10
drm/amd/pp: Fix pp_sclk/mclk_od not work on smu7
drm/amd/powerplay: no MGPU fan boost enablement on DPM disabled
drm/amdgpu: Fix skipping hangged job reset during gpu recover.
drm/amd/powerplay: revise Vega20 pptable version check
drm/amd/display: set backlight level limit to 1
drm/panel: simple: Innolux TV123WAM is actually P120ZDG-BF1
dt-bindings: drm/panel: simple: Innolux TV123WAM is actually P120ZDG-BF1
drm/bridge: ti-sn65dsi86: Remove the mystery delay
drm/panel: simple: Add "no-hpd" delay for Innolux TV123WAM
drm/panel: simple: Support panels with HPD where HPD isn't connected
dt-bindings: drm/panel: simple: Add no-hpd property
drm/edid: Add 6 bpc quirk for BOE panel.
drm/amdgpu: fix reporting of failed msg sent to SMU (v2)
drm/amdgpu: Fix compute ring 1.0.0 failure after reset
drm/amdgpu: fix VM leaf walking
drm/amdgpu: fix amdgpu_vm_fini
drm/amd/powerplay: commonize the API for retrieving current clocks
...
BOE panel (ID: 0x0771) that reports "DFP 1.x compliant TMDS".
But it's 6bpc panel only instead of 8 bpc.
Add panel ID to edid quirk list and set 6 bpc as default to
work around this issue.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Signed-off-by: Lee, Shawn C <shawn.c.lee@intel.com>>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1540792173-7288-1-git-send-email-shawn.c.lee@intel.com
Added content_type property to drm_connector_state
in order to properly handle external HDMI TV content-type setting.
v2:
* Moved helper function which attaches content type property
to the drm core, as was suggested.
Removed redundant connector state initialization.
v3:
* Removed caps in drm_content_type_enum_list.
After some discussion it turned out that HDMI Spec 1.4
was wrongly assuming that IT Content(itc) bit doesn't affect
Content type states, however itc bit needs to be manupulated
as well. In order to not expose additional property for itc,
for sake of simplicity it was decided to bind those together
in same "content type" property.
v4:
* Added it_content checking in intel_digital_connector_atomic_check.
Fixed documentation for new content type enum.
v5:
* Moved patch revision's description to commit messages.
v6:
* Minor naming fix for the content type enumeration string.
v7:
* Fix parameter name for documentation and parameter alignment
in order not to get warning. Added Content Type description to
new HDMI connector properties section.
v8:
* Thrown away unneeded numbers from HDMI content-type property
description. Switch to strings desription instead of plain
definitions.
v9:
* Moved away hdmi specific content-type enum from
drm_connector_state. Content type property should probably not
be bound to any specific connector interface in
drm_connector_state.
Same probably should be done to hdmi_picture_aspect_ration enum
which is also contained in drm_connector_state. Added special
helper function to get derive hdmi specific relevant infoframe
fields.
v10:
* Added usage description to HDMI properties kernel doc.
v11:
* Created centralized function for filling HDMI AVI infoframe, based
on correspondent DRM property value.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180515135928.31092-2-stanislav.lisovskiy@intel.com
[vsyrjala: clean up checkpatch multiple blank lines warnings]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
If the user mode would specify an aspect ratio other than 4:3 or 16:9
we now silently ignore it. Maybe a better apporoach is to return an
error? Let's try that.
Also we must be careful that we don't try to send illegal picture
aspect in the infoframe as it's only capable of signalling none,
4:3, and 16:9. Currently we're sending these bogus infoframes
whenever the cea mode specifies some other aspect ratio.
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525777785-9740-5-git-send-email-ankit.k.nautiyal@intel.com
commit 6dffd431e2 ("drm: Add aspect ratio parsing in DRM layer")
cause us to not send out any VICs in the AVI infoframes. That commit
was since reverted, but if and when we add aspect ratio handing back
we need to be more careful.
Let's handle this by considering the aspect ratio as a requirement
for cea mode matching only if the passed in mode actually has a
non-zero aspect ratio field. This will keep userspace that doesn't
provide an aspect ratio working as before by matching it to the
first otherwise equal cea mode. And once userspace starts to
provide the aspect ratio it will be considerd a hard requirement
for the match.
Also change the hdmi mode matching to use drm_mode_match() for
consistency, but we don't match on aspect ratio there since the
spec doesn't list a specific aspect ratio for those modes.
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: "Lin, Jia" <lin.a.jia@intel.com>
Cc: Akashdeep Sharma <akashdeep.sharma@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525777785-9740-4-git-send-email-ankit.k.nautiyal@intel.com
Use drm_mode_equal_no_clocks_no_stereo() in
drm_match_hdmi_mode_clock_tolerance() for consistency as we
also use it in drm_match_hdmi_mode() and the cea mode matching
functions.
This doesn't actually change anything since the input mode
comes from detailed timings and we match it against
edid_4k_modes[] which. So none of those modes can have stereo
flags set.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525777785-9740-3-git-send-email-ankit.k.nautiyal@intel.com
UAPI Changes:
- Add support for a generic plane alpha property to sun4i, rcar-du and atmel-hclcdc. (Maxime)
Core Changes:
- Stop looking at legacy plane->fb and crtc members in atomic drivers. (Ville)
- mode_valid return type fixes. (Luc)
- Handle zpos normalization in the core. (Peter)
Driver Changes:
- Implement CTM, plane alpha and generic async cursor support in vc4. (Stefan)
- Various fixes for HPD and aux chan in drm_bridge/analogix_dp. (Lin, Zain, Douglas)
- Add support for MIPI DSI to sun4i. (Maxime)
-----BEGIN PGP SIGNATURE-----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=9LYY
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2018-04-26' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v4.18:
UAPI Changes:
- Add support for a generic plane alpha property to sun4i, rcar-du and atmel-hclcdc. (Maxime)
Core Changes:
- Stop looking at legacy plane->fb and crtc members in atomic drivers. (Ville)
- mode_valid return type fixes. (Luc)
- Handle zpos normalization in the core. (Peter)
Driver Changes:
- Implement CTM, plane alpha and generic async cursor support in vc4. (Stefan)
- Various fixes for HPD and aux chan in drm_bridge/analogix_dp. (Lin, Zain, Douglas)
- Add support for MIPI DSI to sun4i. (Maxime)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Thu 26 Apr 2018 08:21:01 PM AEST
# gpg: using RSA key FE558C72A67013C3
# gpg: Can't check signature: public key not found
Link: https://patchwork.freedesktop.org/patch/msgid/b33da7eb-efc9-ae6f-6f69-b7acd6df6797@mblankhorst.nl
We're currently failing to reset everything in display_info.hdmi
which will potentially cause us to use stale information when
swapping monitors. Eg. if the user replaces a HDMI 2.0 monitor
with a HDMI 1.x monitor we will continue to think that the monitor
supports scrambling. That will lead to a black screen since the
HDMI 1.x monitor won't understand the scrambled signal.
Fix the problem by clearing display_info.hdmi fully. And while at
eliminate some duplicated code by calling drm_reset_display_info()
in drm_add_display_info().
Cc: stable@vger.kernel.org
Cc: Antony Chen <antonychen@qnap.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105655
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424130250.7028-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Antony Chen <antonychen@qnap.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJauCZfAAoJEHm+PkMAQRiGWGUH/2rhdQDkoJpYWnjaQkolECG8
MxpGE7nmIIHxQcbSDdHTGJ8IhVm6Z5wZ7ym/PwCDTT043Y1y341sJrIwL2/nTG6d
HVidk8hFvgN6QzlzVAHT3ZZMII/V9Zt+VV5SUYLGnPAVuJNHo/6uzWlTU5g+NTFo
IquFDdQUaGBlkKqby+NoAFnkV1UAIkW0g22cfvPnlO5GMer0gusGyVNvVp7TNj3C
sqj4Hvt3RMDLMNe9RZ2pFTiOD096n8FWpYftZneUTxFImhRV3Jg5MaaYZm9SI3HW
tXrv/LChT/F1mi5Pkx6tkT5Hr8WvcrwDMJ4It1kom10RqWAgjxIR3CMm448ileY=
=YKUG
-----END PGP SIGNATURE-----
Backmerge tag 'v4.16-rc7' into drm-next
Linux 4.16-rc7
This was requested by Daniel, and things were getting
a bit hard to reconcile, most of the conflicts were
trivial though.
drivers, a memory leak on non-blocking commits, a crash on color-eviction.
The is also meson and edid fixes, plus a fix for a doc warning.
-----BEGIN PGP SIGNATURE-----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=555h
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2018-02-21' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Fixes for 4.16. I contains fixes for deadlock on runtime suspend on few
drivers, a memory leak on non-blocking commits, a crash on color-eviction.
The is also meson and edid fixes, plus a fix for a doc warning.
* tag 'drm-misc-fixes-2018-02-21' of git://anongit.freedesktop.org/drm/drm-misc:
drm/tve200: fix kernel-doc documentation comment include
drm/meson: fix vsync buffer update
drm: Handle unexpected holes in color-eviction
drm/edid: Add 6 bpc quirk for CPT panel in Asus UX303LA
drm/amdgpu: Fix deadlock on runtime suspend
drm/radeon: Fix deadlock on runtime suspend
drm/nouveau: Fix deadlock on runtime suspend
drm: Allow determining if current task is output poll worker
workqueue: Allow retrieval of current task's work struct
drm/atomic: Fix memleak on ERESTARTSYS during non-blocking commits
This uses the EDID info from the Sony PlayStation VR headset,
when connected directly, to mark it as non-desktop.
Since the connection box (product id b403) defaults to HDMI
pass-through to the TV, it is not marked as non-desktop.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This uses the EDID info from Lenovo Explorer (LEN-b800), Acer AH100
(ACR-7fce), and Samsung Odyssey (SEC-144a) to mark them as non-desktop.
The other entries are for the HP Windows Mixed Reality Headset (HPN-3515),
the Fujitsu Windows Mixed Reality headset (FUJ-1970), the Dell Visor
(DEL-7fce), and the ASUS HC102 (AUS-c102). They are not tested with real
hardware, but listed as HMD monitors alongside the tested headsets in the
Microsoft HololensSensors driver package.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This uses the EDID info from Oculus Rift DK1 (OVR-0001), DK2 (OVR-0003),
and CV1 (OVR-0004) to mark them as non-desktop.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Similar to commit e10aec652f ("drm/edid: Add 6 bpc quirk for display
AEO model 0."), the EDID reports "DFP 1.x compliant TMDS" but it support
6bpc instead of 8 bpc.
Hence, use 6 bpc quirk for this panel.
Fixes: 196f954e25 ("drm/i915/dp: Revert "drm/i915/dp: fall back to 18 bpp when sink capability is unknown"")
BugLink: https://bugs.launchpad.net/bugs/1749420
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180218085359.7817-1-kai.heng.feng@canonical.com
The Parfait (version 2.1.0) static code analysis tool found the
following NULL pointer derefernce problem.
- drivers/gpu/drm/drm_edid.c
The call to drm_cvt_mode() in function drm_mode_std() for the
HDTV hack resulted in the possibility of accessing a NULL pointer
if drm_mode_std() returned NULL. A check for this added right after
the call to drm_cvt_mode() in this particular area of code.
Signed-off-by: Joe Moriarty <joe.moriarty@oracle.com>
Reviewed-by: Steven Sistare <steven.sistare@oracle.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180212195144.98323-4-joe.moriarty@oracle.com
Assign true or false to boolean variables instead of an integer value.
This issue was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130100528.GA7154@training
Also some breadcrumbs for how exactly to find this. Probably should
pass drm_connector * or at least drm_display_info * to that function
instead. But drm_hdmi_avi_infoframe_quant_range probably also wants
drm_connector_state (and the hdmi stuff moved into that), so this is a
bit more work.
v2: Fix typo (Alex).
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: 9271c0ca57 ("drm/edid: Don't send non-zero YQ in AVI infoframe for HDMI 1.x sinks")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171214203054.20141-2-daniel.vetter@ffwll.ch
There are a set of values in the drm_display_info structure for each
connector which hold information derived from EDID. These are computed
in drm_add_display_info. Before this patch, that was only called in
drm_add_edid_modes. This meant that they were only set when EDID was
present and never reset when EDID was not, as happened when the
display was disconnected.
One of these fields, non_desktop, is used from
drm_mode_connector_update_edid_property, the function responsible for
assigning the new edid value to the application-visible property.
Various drivers call these two functions (drm_add_edid_modes and
drm_mode_connector_update_edid_property) in different orders. This
means that even when EDID is present, the drm_display_info fields may
not have been computed at the time that
drm_mode_connector_update_edid_property used the non_desktop value to
set the non_desktop property.
I've added a public function (drm_reset_display_info) that resets the
drm_display_info field values to default values and then made the
drm_add_display_info function public. These two functions are now
called directly from drm_mode_connector_update_edid_property so that
the drm_display_info fields are always computed from the current EDID
information before being used in that function.
This means that the drm_display_info values are often computed twice,
once when the EDID property it set and a second time when EDID is used
to compute modes for the device. The alternative would be to uniformly
ensure that the values were computed once before being used, which
would require that all drivers reliably invoke the two paths in the
same order. The computation is inexpensive enough that it seems more
maintainable in the long term to simply compute them in both paths.
The API to drm_add_display_info has been changed so that it no longer
takes the set of edid-based quirks as a parameter. Rather, it now
computes those quirks itself and returns them for further use by
drm_add_edid_modes.
This patch also includes a number of 'const' additions caused by
drm_mode_connector_update_edid_property taking a 'const struct edid *'
parameter and wanting to pass that along to drm_add_display_info.
v2: after review by Daniel Vetter <daniel.vetter@ffwll.ch>
Removed EXPORT_SYMBOL_GPL for drm_reset_display_info and
drm_add_display_info.
Added FIXME in drm_mode_connector_update_edid_property about
potentially merging that with drm_add_edid_modes to avoid
the need for two driver calls.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213084427.31199-1-keithp@keithp.com
(danvet: cherry picked from commit 12a889bf4bca ("drm: rework delayed
connector cleanup in connector_iter") from drm-misc-next since
functional conflict with changes in -next and we need to make sure
both have the right version and nothing gets lost.)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
There are a set of values in the drm_display_info structure for each
connector which hold information derived from EDID. These are computed
in drm_add_display_info. Before this patch, that was only called in
drm_add_edid_modes. This meant that they were only set when EDID was
present and never reset when EDID was not, as happened when the
display was disconnected.
One of these fields, non_desktop, is used from
drm_mode_connector_update_edid_property, the function responsible for
assigning the new edid value to the application-visible property.
Various drivers call these two functions (drm_add_edid_modes and
drm_mode_connector_update_edid_property) in different orders. This
means that even when EDID is present, the drm_display_info fields may
not have been computed at the time that
drm_mode_connector_update_edid_property used the non_desktop value to
set the non_desktop property.
I've added a public function (drm_reset_display_info) that resets the
drm_display_info field values to default values and then made the
drm_add_display_info function public. These two functions are now
called directly from drm_mode_connector_update_edid_property so that
the drm_display_info fields are always computed from the current EDID
information before being used in that function.
This means that the drm_display_info values are often computed twice,
once when the EDID property it set and a second time when EDID is used
to compute modes for the device. The alternative would be to uniformly
ensure that the values were computed once before being used, which
would require that all drivers reliably invoke the two paths in the
same order. The computation is inexpensive enough that it seems more
maintainable in the long term to simply compute them in both paths.
The API to drm_add_display_info has been changed so that it no longer
takes the set of edid-based quirks as a parameter. Rather, it now
computes those quirks itself and returns them for further use by
drm_add_edid_modes.
This patch also includes a number of 'const' additions caused by
drm_mode_connector_update_edid_property taking a 'const struct edid *'
parameter and wanting to pass that along to drm_add_display_info.
v2: after review by Daniel Vetter <daniel.vetter@ffwll.ch>
Removed EXPORT_SYMBOL_GPL for drm_reset_display_info and
drm_add_display_info.
Added FIXME in drm_mode_connector_update_edid_property about
potentially merging that with drm_add_edid_modes to avoid
the need for two driver calls.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213084427.31199-1-keithp@keithp.com
Cross-subsystem Changes:
- device tree doc for the Mitsubishi AA070MC01 and Tianma TM070RVHG71
panels (Lukasz Majewski) and for a 2nd endpoint on stm32 (Philippe Cornu)
Core Changes:
The most important changes are:
- Add drm_driver .last_close and .output_poll_changed helpers to reduce
fbdev emulation footprint in drivers (Noralf)
- Fix plane clipping in core and for vmwgfx (Ville)
Then we have a bunch of of improvement for print and debug such as the
addition of a framebuffer debugfs file. ELD connector, HDMI and
improvements. And a bunch of misc improvements, clean ups and style
changes and doc updates
[airlied: drop eld bits from amdgpu_dm]
Driver Changes:
- sii8620: filter unsupported modes and add DVI mode support (Maciej Purski)
- rockchip: analogix_dp: Remove unnecessary init code (Jeffy Chen)
- virtio, cirrus: add fb create_handle support to enable screenshots(Lepton Wu)
- virtio: replace reference/unreference with get/put (Aastha Gupta)
- vc4, gma500: Convert timers to use timer_setup() (Kees Cook)
- vc4: Reject HDMI modes with too high of clocks (Eric)
- vc4: Add support for more pixel formats (Dave Stevenson)
- stm: dsi: Rename driver name to "stm32-display-dsi" (Philippe Cornu)
- stm: ltdc: add a 2nd endpoint (Philippe Cornu)
- via: use monotonic time for VIA_WAIT_IRQ (Arnd Bergmann)
* tag 'drm-misc-next-2017-11-30' of git://anongit.freedesktop.org/drm/drm-misc: (96 commits)
drm/bridge: tc358767: add copyright lines
MAINTAINERS: change maintainer for Rockchip drm drivers
drm/vblank: Fix vblank timestamp debugs
drm/via: use monotonic time for VIA_WAIT_IRQ
dma-buf: Fix ifnullfree.cocci warnings
drm/printer: Add drm_vprintf()
drm/edid: Allow HDMI infoframe without VIC or S3D
video/hdmi: Allow "empty" HDMI infoframes
dma-buf/fence: Fix lock inversion within dma-fence-array
drm/sti: Handle return value of platform_get_irq_byname
drm/vc4: Add support for NV21 and NV61.
drm/vc4: Use .pixel_order instead of custom .flip_cbcr
drm/vc4: Add support for DRM_FORMAT_RGB888 and DRM_FORMAT_BGR888
drm: Move drm_plane_helper_check_state() into drm_atomic_helper.c
drm: Check crtc_state->enable rather than crtc->enabled in drm_plane_helper_check_state()
drm/vmwgfx: Try to fix plane clipping
drm/vmwgfx: Use drm_plane_helper_check_state()
drm/vmwgfx: Remove bogus crtc coords vs fb size check
gpu: gma500: remove unneeded DRIVER_LICENSE #define
drm: don't link DP aux i2c adapter to the hardware device node
...
4.15 merge window fixes 1
* tag 'drm-misc-fixes-2017-11-20' of git://anongit.freedesktop.org/drm/drm-misc:
drm/edid: Don't send non-zero YQ in AVI infoframe for HDMI 1.x sinks
drm/vc4: Account for interrupts in flight
This uses the EDID info from my HTC Vive to mark it as
non-desktop.
v2: Change description from non-standard to non-desktop
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds the infrastructure needed to quirk displays
using edid and to mark them a non-desktop.
A non-desktop display is one which shouldn't normally be included
as a part of a desktop environment.
This is meant to cover head mounted devices like HTC Vive.
v2: Change description from non-standard to non-desktop, add docs
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
fixup docs
Appedix F of HDMI 2.0 says that some HDMI sink may fail to switch from
3D to 2D mode in a timely fashion if the source simply stops sending the
HDMI infoframe. The suggested workaround is to keep sending the
infoframe even when strictly not necessary (ie. no VIC and no S3D).
HDMI 1.4 does allow for this behaviour, stating that sending the
infoframe is optional in this case.
The infoframe was first specified in HDMI 1.4, so in theory sinks
predating that may not appreciate us sending an uknown infoframe
their way. To avoid regressions let's try to determine if the sink
supports the infoframe or not. Unfortunately there's no direct way
to do that, so instead we'll just check if we managed to parse any
HDMI 1.4 4k or stereo modes from the EDID, and if so we assume the
sink will accept the infoframe. Also if the EDID contains the HDMI
2.0 HDMI Forum VSDB we can assume the sink is prepared to receive
the infoframe.
v2: Fix getting has_hdmi_infoframe from display_info
Always fail constructing the infoframe if the display
possibly can't handle it
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171113170427.4150-3-ville.syrjala@linux.intel.com
Apparently some sinks look at the YQ bits even when receiving RGB,
and they get somehow confused when they see a non-zero YQ value.
So we can't just blindly follow CEA-861-F and set YQ to match the
RGB range.
Unfortunately there is no good way to tell whether the sink
designer claims to have read CEA-861-F. The CEA extension block
revision number has generally been stuck at 3 since forever,
and even a very recently manufactured sink might be based on
an old design so the manufacturing date doesn't seem like
something we can use. In lieu of better information let's
follow CEA-861-F only for HDMI 2.0 sinks, since HDMI 2.0 is
based on CEA-861-F. For HDMI 1.x sinks we'll always set YQ=0.
The alternative would of course be to always set YQ=0. And if
we ever encounter a HDMI 2.0+ sink with this bug that's what
we'll probably have to do.
Cc: stable@vger.kernel.org
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Neil Kownacki <njkkow@gmail.com>
Reported-by: Neil Kownacki <njkkow@gmail.com>
Tested-by: Neil Kownacki <njkkow@gmail.com>
Fixes: fcc8a22cc9 ("drm/edid: Set YQ bits in the AVI infoframe according to CEA-861-F")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101639
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171108152504.12596-1-ville.syrjala@linux.intel.com
Acked-by: Eric Anholt <eric@anholt.net>
Call drm_edid_to_eld() from drm_add_edid_modes() to fill in the ELD
automatically. There's no harm in doing this for connectors that do not
support audio.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/551b2e1cf19be04c510e7865d7539cfc2f54ea89.1509545641.git.jani.nikula@intel.com
Since drm_edid_to_eld() knows the connector type, we can set the type in
ELD while at it. Most connectors this gets called on are not DP
encoders, and with the HDMI type being 0, this does not change behaviour
for non-DP.
For i915 having this in place earlier would have saved a considerable
amount of debugging that lead to the fix 2d8f63297b ("drm/i915: always
update ELD connector type after get modes"). I don't see other drivers,
even the ones calling drm_edid_to_eld() on DP connectors, setting the
connector type in ELD.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Mark Yao <mark.yao@rock-chips.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d527b31619528c477c2c136f25cdf118bc0cfc1d.1509545641.git.jani.nikula@intel.com
Handle debugfs override edid and firmware edid at the low level to
transparently and completely replace the real edid. Previously, we
practically only used the modes from the override EDID, and none of the
other data, such as audio parameters.
This change also prevents actual EDID reads when the EDID is to be
overridden, but retains the DDC probe. This is useful if the reason for
preferring override EDID are problems with reading the data, or
corruption of the data.
Move firmware EDID loading from helper to core, as the functionality
moves to lower level as well. This will result in a change of module
parameter from drm_kms_helper.edid_firmware to drm.edid_firmware, which
arguably makes more sense anyway.
Some future work remains related to override and firmware EDID
validation. Like before, no validation is done for override EDID. The
firmware EDID is validated separately in the loader. Some unification
and deduplication would be in order, to validate all of them at the
drm_do_get_edid() level, like "real" EDIDs.
v2: move firmware loading to core
v3: rebase, commit message refresh
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1e8a710bcac46e5136c1a7b430074893c81f364a.1505203831.git.jani.nikula@intel.com
CEA-861-F spec adds ycbcr420 deep color support information
in hf-vsdb block. This patch extends the existing hf-vsdb parsing
function by adding parsing of ycbcr420 deep color support from the
EDID and adding it into display information stored.
V2: Rebase
V3: Rebase
V4: Moved definition of y420_dc_modes into this patch, where its used
(Ville)
V5: Optimize function, if(conditions) not reqd (Ville)
V6: Rebase
V7: Rebase
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1499960000-9232-8-git-send-email-shashank.sharma@intel.com
[vsyrjala: Fix sparse indentation warn]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
HDMI 2.0 spec adds support for YCBCR420 sub-sampled output.
CEA-861-F adds two new blocks in EDID's CEA extension blocks,
to provide information about sink's YCBCR420 output capabilities.
These blocks are:
- YCBCR420vdb(YCBCR 420 video data block):
This block contains VICs of video modes, which can be sopported only
in YCBCR420 output mode (Not in RGB/YCBCR444/422. Its like a normal
SVD block, valid for YCBCR420 modes only.
- YCBCR420cmdb(YCBCR 420 capability map data block):
This block gives information about video modes which can support
YCBCR420 output mode also (along with RGB,YCBCR444/422 etc) This
block contains a bitmap index of normal svd videomodes, which can
support YCBCR420 output too.
So if bit 0 from first vcb byte is set, first video mode in the svd
list can support YCBCR420 output too. Bit 1 means second video mode
from svd list can support YCBCR420 output too, and so on.
This patch adds two bitmaps in display's hdmi_info structure, one each
for VCB and VDB modes. If the source is HDMI 2.0 capable, this patch
adds:
- VDB modes (YCBCR 420 only modes) in connector's mode list, also makes
an entry in the vdb_bitmap per vic.
- VCB modes (YCBCR 420 also modes) only entry in the vcb_bitmap.
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jose Abreu <joabreu@synopsys.com>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
V2: Addressed
Review comments from Emil:
- Use 1ULL<<i instead of 1<<i to make sure the output is 64bit.
- Use the suggested method for updating dbmap.
- Add documentation for YCBCR420_vcb_map to fix kbuild warning.
Review comments from Ville:
- Do not expose the YCBCR420 flags in uabi layer, keep it internal.
- Save a map of YCBCR420 modes for future reference.
- Check db length before trying to parse extended tag.
- Add a warning if there are > 64 modes in capability map block.
- Use y420cmdb in function names and macros while dealing with vcb
to be aligned with spec.
- Move the display information parsing block ahead of mode parsing
blocks.
V3: Addressed design/review comments from Ville
- Do not add flags in video modes, else we have to expose them to user
- There should not be a UABI change, and kernel should detect the
choice of the output based on type of mode, and the bitmaps.
- Use standard bitops from kernel bitmap header, instead of calculating
bit positions manually.
V4: Addressed review comments from Ville:
- s/ycbcr_420_vdb/y420vdb
- s/ycbcr_420_vcb/y420cmdb
- Be less verbose on description of do_y420vdb_modes
- Move newmode variable in the loop scope.
- Use svd_to_vic() to get a VIC, instead of 0x7f
- Remove bitmap description for CMDB modes & VDB modes
- Dont add connector->ycbcr_420_allowed check for cmdb modes
- Remove 'len' variable, in is_y420cmdb function, which is used
only once
- Add length check in is_y420vdb function
- Remove unnecessary if (!db) check in function parse_y420cmdb_bitmap
- Do not add print about YCBCR 420 modes
- Fix indentation in few places
- Move ycbcr420_dc_modes in next patch, where its used
- Add a separate patch for movement of drm_add_display_info()
V5: Addressed review comments from Ville:
- Add the patch which cleans up the current EXTENDED_TAG usage
- Make y420_cmdb_map u64
- Do not block ycbcr420 modes while parsing the EDID, rather
add a separate helper function to prune ycbcr420-only modes from
connector's probed modes.
V6: Rebase
V7: Move this patch after the 420_only validation patch (Ville)
V8: Addressed review comments from Ville
- use cea_vic_valid check before adding cmdb/vdb modes
- add check for i < 64 while adding cmdb modes
- use 1ULL while checking bitmap
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1500028426-14883-1-git-send-email-shashank.sharma@intel.com
[vsyrjala: Fix checkpatch complaints and indentation]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
CEA-861-F introduces extended tag codes for EDID extension blocks,
which indicates the actual type of the data block. The code for
using exteded tag is 0x7, whereas in the existing code, the
corresponding macro is named as "VIDEO_CAPABILITY_BLOCK"
This patch renames the macro and usages from "VIDEO_CAPABILITY_BLOCK"
to "USE_EXTENDED_TAG"
V2: Add extended tag code check for video capabilitiy block (ville)
V3: Ville:
- Use suggested names for macros
- Check the block length first, before checking the extended tag
V4: Fix commit message (David)
V5: Introduced this patch into HDMI-YCBCR-output series
V6: Rebase
V7: Rebase
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1499960000-9232-5-git-send-email-shashank.sharma@intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
CEA-861-F adds ycbcr capability map block, for HDMI 2.0 sinks.
This block contains a map of indexes of CEA modes, which can
support YCBCR 420 output also. To avoid multiple parsing of same
CEA block, let's parse the sink information and get this map, before
parsing CEA modes.
This patch moves the call to drm_add_display_info function, before the
mode parsing block.
V4: Introduced new patch in the series
V5: Move this patch before 4:2:0 parsing patch (ville)
Added r-b from Ville
V6: Rebase
V7: Rebase
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1499960000-9232-4-git-send-email-shashank.sharma@intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
CEA-861-F specs defines new video modes to be used with
HDMI 2.0 EDIDs. The VIC range has been extended from 1-64 to
1-107.
Our existing CEA modedb contains only 64 modes (VIC=1 to VIC=64). Now
to be able to parse new CEA modes using the existing methods, we have
to complete the modedb (VIC=65 onwards).
This patch adds:
- Timings for existing CEA video modes (from VIC=65 till VIC=92)
- Newly added 4k modes (from VIC=93 to VIC=107).
The patch was originaly discussed and reviewed here:
https://patchwork.freedesktop.org/patch/135810/
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
V2: Rebase
V3: Rebase
V4: Added native bit handling as per CEA-861-F spec (Ville)
V5: Fix timings for VIC 77:1920x1080 and 104:3840x2160p (Ville)
Remove unnecessary paranthesis from function svd_to_vic (Ville)
Added r-b (Neil)
V6: Rebase
V7: Fix indentation for modes from VIC 80
Reviewed-by: Jose Abreu <Jose.Abreu@synopsys.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1499960000-9232-3-git-send-email-shashank.sharma@intel.com
[vsyrjala: Fix up remaining formatting/indentation issues]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
HDMI 1.4b support the CEA video modes as per range of CEA-861-D (VIC 1-64).
For any other mode, the VIC filed in AVI infoframes should be 0.
HDMI 2.0 sinks, support video modes range as per CEA-861-F spec, which is
extended to (VIC 1-107).
This patch adds a bool input variable, which indicates if the connected
sink is a HDMI 2.0 sink or not. This will make sure that we don't pass a
HDMI 2.0 VIC to a HDMI 1.4 sink.
This patch touches all drm drivers, who are callers of this function
drm_hdmi_avi_infoframe_from_display_mode but to make sure there is
no change in current behavior, is_hdmi2 is kept as false.
In case of I915 driver, this patch:
- checks if the connected display is HDMI 2.0.
- HDMI infoframes carry one of this two type of information:
- VIC for 4K modes for HDMI 1.4 sinks
- S3D information for S3D modes
As CEA-861-F has already defined VICs for 4K videomodes, this
patch doesn't allow sending HDMI infoframes for HDMI 2.0 sinks,
until the mode is 3D.
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jose Abreu <jose.abreu@synopsys.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
PS: This patch touches a few lines in few files, which were
already above 80 char, so checkpatch gives 80 char warning again.
- gpu/drm/omapdrm/omap_encoder.c
- gpu/drm/i915/intel_sdvo.c
V2: Rebase, Added r-b from Andrzej
V3: Addressed review comment from Ville:
- Do not send VICs in both AVI-IF and HDMI-IF
send only one of it.
V4: Rebase
V5: Added r-b from Neil.
Addressed review comments from Ville
- Do not block HDMI vendor IF, instead check for VIC while
handling AVI infoframes
V6: Rebase
V7: Rebase
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1499960000-9232-2-git-send-email-shashank.sharma@intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
The builtin eDP panel in the HP zBook 17 G2 supports 10 bpc,
as advertised by the Laptops product specs and verified via
injecting a fixed edid + photometer measurements, but edid
reports unknown depth, so drivers fall back to 6 bpc.
Add a quirk to get the full 10 bpc.
Cc: stable@vger.kernel.org
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1492787108-23959-1-git-send-email-mario.kleiner.de@gmail.com
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJYzznuAAoJEHm+PkMAQRiGAzMIAJDBo5otTMMLhg8eKj8Cnab4
2NyaoWDN6mtU427rzEKEfZlTtp3gIBVdFex5x442weIdw6BgRQW0dvF/uwEn08yI
9Wx7VJmIUyH9M8VmhDtkUTFrhwUGr29qb3JhENMd7tv/CiJaehGRHCT3xqo5BDdu
xiyPcwSkwP/NH24TS91G87gV6r0I0oKLSAxu+KifEFESrb8gaZaduslzpEj3m/Ds
o9EPpfzaiGAdW5EdNfPtviYbBk7ZOXwtxdMV+zlvsLcaqtYnFEsJZd2WyZL0zGML
VXBVxaYtlyTeA7Mt8YYUL+rDHELSOtCeN5zLfxUvYt+Yc0Y6LFBLDOE5h8b3eCw=
=uKUo
-----END PGP SIGNATURE-----
BackMerge tag 'v4.11-rc3' into drm-next
Linux 4.11-rc3 as requested by Daniel
This patch does following:
- Adds a new structure (drm_hdmi_info) in drm_display_info.
This structure will be used to save and indicate if sink
supports advanced HDMI 2.0 features
- Adds another structure drm_scdc within drm_hdmi_info, to
reflect scdc support and capabilities in connected HDMI 2.0 sink.
- Checks the HF-VSDB block for presence of SCDC, and marks it
in scdc structure
- If SCDC is present, checks if sink is capable of generating
SCDC read request, and marks it in scdc structure.
V2: Addressed review comments
Thierry:
- Fix typos in commit message and make abbreviation consistent
across the commit message.
- Change structure object name from hdmi_info -> hdmi
- Fix typos and abbreviations in description of structure drm_hdmi_info
end the description with a full stop.
- Create a structure drm_scdc, and keep all information related to SCDC
register set (supported, read request supported) etc in it.
Ville:
- Change rr -> read_request
- Call drm_detect_scrambling function drm_parse_hf_vsdb so that all
of HF-VSDB parsing can be kept in same function, in incremental
patches.
V3: Rebase.
V4: Rebase.
V5: Rebase.
V6: Addressed review comments from Ville
- Add clock rate calculations for 1/10 and 1/40 ratios
- Remove leftovers from old patchset
V7: Added R-B from Jose.
V8: Rebase.
V9: Rebase.
V10: Rebase.
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-5-git-send-email-shashank.sharma@intel.com
This patch does following:
- Adds a new structure (drm_hdmi_info) in drm_display_info.
This structure will be used to save and indicate if sink
supports advanced HDMI 2.0 features
- Adds another structure drm_scdc within drm_hdmi_info, to
reflect scdc support and capabilities in connected HDMI 2.0 sink.
- Checks the HF-VSDB block for presence of SCDC, and marks it
in scdc structure
- If SCDC is present, checks if sink is capable of generating
SCDC read request, and marks it in scdc structure.
V2: Addressed review comments
Thierry:
- Fix typos in commit message and make abbreviation consistent
across the commit message.
- Change structure object name from hdmi_info -> hdmi
- Fix typos and abbreviations in description of structure drm_hdmi_info
end the description with a full stop.
- Create a structure drm_scdc, and keep all information related to SCDC
register set (supported, read request supported) etc in it.
Ville:
- Change rr -> read_request
- Call drm_detect_scrambling function drm_parse_hf_vsdb so that all
of HF-VSDB parsing can be kept in same function, in incremental
patches.
V3: Rebase.
V4: Rebase.
V5: Rebase.
V6: Rebase.
V7: Added R-B from Jose.
V8: Rebase.
V9: Rebase.
V10: Rebase.
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-4-git-send-email-shashank.sharma@intel.com
This patch implements a small function that finds if a
given CEA db is hdmi-forum vendor specific data block
or not.
V2: Rebase.
V3: Added R-B from Jose.
V4: Rebase
V5: Rebase
V6: Rebase
V7: Rebase
V8: Rebase
V9: Rebase
V10: Rebase
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-3-git-send-email-shashank.sharma@intel.com
Rotel RSX-1058 is a receiver with 4 HDMI inputs and a HDMI output, all
1.1.
When a sink that supports deep color is connected to the output, the
receiver will send EDIDs that advertise this capability, even if it
isn't possible with HDMI versions earlier than 1.3.
Currently the kernel is assuming that deep color is possible and the
sink displays an error.
This quirk will make sure that deep color isn't used with this
particular receiver.
Fixes: 7a0baa6234 ("Revert "drm/i915: Disable 12bpc hdmi for now"")
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170220152545.13153-1-tomeu.vizoso@collabora.com
Cc: stable@vger.kernel.org
Cc: Matt Horan <matt@matthoran.com>
Tested-by: Matt Horan <matt@matthoran.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99869
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Use a more common logging style.
Miscellanea:
o Coalesce formats and realign arguments
Signed-off-by: Joe Perches <joe@perches.com>
[danvet: Resolve minor conflict in drm_edid.c]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Skip DDC probe for forced connector status. Don't try to read the EDID
if the connector is forced off. Skipping probe for forced on connectors
will make more sense when drm_do_get_edid() will handle override and
firmware EDIDs.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487344854-18777-4-git-send-email-jani.nikula@intel.com
The warnings from parsing the EDID are not driver errors, but the
"normal but significant" conditions from the external device. As such,
they do not need the ferocity of an *ERROR*, but can use the less harsh
DRM_NOTE instead.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170210195913.9878-1-chris@chris-wilson.co.uk
This is just a cleanup, no functional change.
The fixup code for 1366x768 in drm_mode_create_from_cmdline_mode() is
basically a copy of the existing code in drm_edid.c. Make the latter
code public so that it can be called from the former function.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20170117164329.10551-1-tiwai@suse.de
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[vsyrjala: include drm_crtc_internal.h to make sparse happy]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
CEA-861-F tells us:
"When transmitting any RGB colorimetry, the Source should set the
YQ-field to match the RGB Quantization Range being transmitted
(e.g., when Limited Range RGB, set YQ=0 or when Full Range RGB,
set YQ=1) and the Sink shall ignore the YQ-field."
So let's go ahead and do that. Perhaps there are sinks that don't
ignore the YQ as they should for RGB?
I wasn't able to find similar text in CEA-861-E, so it would seem
to be a fairly "recent" addition.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170111125725.8086-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Eric Anholt <eric@anholt.net>
HDMI 2.0 recommends that we set the Q bits in the AVI infoframe
even when the sink does not support quantization range selection (QS=0).
According to CEA-861 we can do that as long as the Q we send matches
the default quantization range for the mode.
Previously I think I had misread the spec as saying that you can't
send a non-zero Q at all when QS=0. But that's not what the spec
actually says.
v2: Fix typo in commit message (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170111125725.8086-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Eric Anholt <eric@anholt.net>
Pull the logic to populate the quantization range information
in the AVI infoframe into a small helper. We'll be adding a bit
more logic to it, and having it in a central place seems like a
good idea since it's based on the CEA-861 spec.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170111125725.8086-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Eric Anholt <eric@anholt.net>
Make the code selecting the RGB quantization range a little less magicy
by wrapping it up in a small helper.
v2: s/adjusted_mode/mode in vc4 to make it actually compile
v3: Add a comment proposed by Eric
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170111141835.25369-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Eric Anholt <eric@anholt.net>
<drm/drm_crtc.h> used to define most of the in-kernel KMS API. It has
now been split into separate files for each object type, but still
includes most other KMS headers to avoid breaking driver compilation.
As a step towards fixing that problem, remove the inclusion of
<drm/drm_encoder.h> from <drm/drm_crtc.h> and include it instead where
appropriate. Also remove the forward declarations of the drm_encoder and
drm_encoder_helper_funcs structures from <drm/drm_crtc.h> as they're not
needed in the header.
<drm/drm_encoder.h> now has to include <drm/drm_mode.h> and contain a
forward declaration of struct drm_encoder in order to allow including it
as the first header in a compilation unit.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sinclair Yeh <syeh@vmware.com> # For vmwgfx
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1481709550-29226-2-git-send-email-laurent.pinchart+renesas@ideasonboard.com
Big thing is that drm-misc is now officially a group maintainer/committer
model thing, with MAINTAINERS suitably updated. Otherwise just the usual
pile of misc things all over, nothing that stands out this time around.
* tag 'drm-misc-next-2016-11-29' of git://anongit.freedesktop.org/git/drm-misc: (33 commits)
drm: Introduce drm_framebuffer_assign()
drm/bridge: adv7511: Enable the audio data and clock pads on adv7533
drm/bridge: adv7511: Add Audio support
drm/edid: Consider alternate cea timings to be the same VIC
drm/atomic: Constify drm_atomic_crtc_needs_modeset()
drm: bridge: dw-hdmi: add ASoC dependency
drm: Fix shift operations for drm_fb_helper::drm_target_preferred()
drm: Avoid NULL dereference for DRM_LEGACY debug message
drm: Use u64_to_user_ptr() helper for blob ioctls
drm: Fix conflicting macro parameter in drm_mm_for_each_node_in_range()
drm: Fixup kernel doc for driver->gem_create_object
drm/hisilicon/hibmc: mark PM functions __maybe_unused
drm/hisilicon/hibmc: Checking for NULL instead of IS_ERR()
drm: bridge: add DesignWare HDMI I2S audio support
drm: Check against color expansion in drm_mm_reserve_node()
drm: Define drm_mm_for_each_node_in_range()
drm/doc: Fix links in drm_property.c
MAINTAINERS: Add link to drm-misc documentation
vgaarb: use valid dev pointer in vgaarb_info()
drm/atomic: Unconfuse the old_state mess in commmit_tail
...
CEA-861 specifies that the vertical front porch may vary by one or two
lines for specific VICs. Up to now we've only considered a mode to match
the VIC if it matched the shortest possible vertical front porch length
(as that is the variant we store in cea_modes[]). Let's allow our VIC
matching to work with the other timings variants as well so that that
we'll send out the correct VIC if the variant actually used isn't the
one with the shortest vertical front porch.
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Adam Jackson <ajax@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478177609-16762-2-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Tvrtko needs
commit b3c11ac267
Author: Eric Engestrom <eric@engestrom.ch>
Date: Sat Nov 12 01:12:56 2016 +0000
drm: move allocation out of drm_get_format_name()
to be able to apply his patches without conflicts.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
All the VICs apart from 58 and 59 have the word "Hz" included in the
comment. Include it for 59 and 59 as well.
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1478177609-16762-1-git-send-email-ville.syrjala@linux.intel.com
Currently, if drm.debug is enabled, we get a DRM_ERROR message on the
intermediate edid reads. This causes transient failures in CI which
flags up the sporadic EDID read failures, which are recovered by
rereading the EDID automatically. This patch combines the reporting done
by drm_do_get_edid() itself with the bad block printing from
get_edid_block(), into a single warning associated with the connector
once all attempts to retrieve the EDID fail.
v2: Print the whole EDID, marking up the bad/zero blocks. This requires
recording the whole of the raw edid, then a second pass to reduce it to
the valid extensions.
v3: Fix invalid/valid extension fumble.
References: https://bugs.freedesktop.org/show_bug.cgi?id=98228
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161024113821.26263-1-chris@chris-wilson.co.uk
drm_edid_to_eld() is just mean to cook up the ELD for the audio driver,
so having it parse non-audio related stuff seems just wrong, and
potentially could lead to that information not being even filled out
if the function doesn't even get called. Let's move that stuff to the
place where we parse the color formats and whatnot from the CEA ext
block.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1475070703-6435-9-git-send-email-ville.syrjala@linux.intel.com
It's not a good idea to leave stale cea_rev in the drm_display_info. The
current EDID might not even have a CEA ext block in which case we'd end
up leaving the stale value in place.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1475070703-6435-8-git-send-email-ville.syrjala@linux.intel.com
Instead of parsing parts of the CEA extension block in two places
to determine supported color formats and whatnot, let's just
consolidate it to one function. This also makes it possible to neatly
flatten drm_assign_hdmi_deep_color_info().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1475070703-6435-7-git-send-email-ville.syrjala@linux.intel.com
We already pass the connector to drm_add_display_info() and
drm_assign_hdmi_deep_color_info(), so passing the
connector->display_info also is pointless.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1475070703-6435-6-git-send-email-ville.syrjala@linux.intel.com
We have the drm_display_info for storing information about the sink, so
let's move dvi_dual and max_tmds_clock in there.
v2: Deal with superfluous code shuffling
Document dvi_dual and max_tmds_clock too
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com> (v1)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1475070703-6435-5-git-send-email-ville.syrjala@linux.intel.com
We generally store clocks in kHz, so let's do that for the
HDMI max TMDS clock value as well. Less surpising.
v2: Deal with superfluous code shuffling
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com> (v1)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1475070703-6435-4-git-send-email-ville.syrjala@linux.intel.com
Clear out old max_tmds_clock and dvi_dual information (possibly from a
previous EDID) before parsing the current EDID. Tne current EDID might
not even have these in its HDMI VSDB, which would mean that we'd leave
the old stale values in place.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1475070703-6435-3-git-send-email-ville.syrjala@linux.intel.com
Clear out stale audio latency information (potentially from a previous
EDID) before constructing the ELD from the EDID.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1475070703-6435-2-git-send-email-ville.syrjala@linux.intel.com
Andres Rodriguez