After a few updates against swnode APIs the kernel documentation, i.e.
for swnode group registration and unregistration deviates from the one
for swnode array. In general, the same rules are applied to both.
Hence, synchronize descriptions of swnode array and group APIs
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210308103644.81960-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function device_add_software_node() was meant to
register the node supplied to it, but only if that node
wasn't already registered. Right now the function attempts
to always register the node. That will cause a failure with
nodes that are already registered.
Fixing that by incrementing the reference count of the nodes
that have already been registered, and only registering the
new nodes. Also, clarifying the behaviour in the function
documentation.
Fixes: e68d0119e3 ("software node: Introduce device_add_software_node()")
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Software node can not be registered before its parent.
Fixes: 80488a6b1d ("software node: Add support for static node descriptors")
Cc: 5.10+ <stable@vger.kernel.org> # 5.10+
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-----BEGIN PGP SIGNATURE-----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=/wKL
-----END PGP SIGNATURE-----
Merge tag 'media/v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- some core fixes in VB2 mem2mem support
- some improvements and cleanups in V4L2 async kAPI
- newer controls in V4L2 API for H-264 and HEVC codecs
- allegro-dvt driver was promoted from staging
- new i2c sendor drivers: imx334, ov5648, ov8865
- new automobile camera module: rdacm21
- ipu3 cio2 driver started gained support for some ACPI BIOSes
- new ATSC frontend: MaxLinear mxl692 VSB tuner/demod
- the SMIA/CCS driver gained more support for CSS standard
- several driver fixes, updates and improvements
* tag 'media/v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (362 commits)
media: v4l: async: Fix kerneldoc documentation for async functions
media: i2c: max9271: Add MODULE_* macros
media: i2c: Kconfig: Make MAX9271 a module
media: imx334: 'ret' is uninitialized, should have been PTR_ERR()
media: i2c: Add imx334 camera sensor driver
media: dt-bindings: media: Add bindings for imx334
media: ov8856: Configure sensor for GRBG Bayer for all modes
media: i2c: imx219: Implement V4L2_CID_LINK_FREQ control
media: ov5675: fix vflip/hflip control
media: ipu3-cio2: Build bridge only if ACPI is enabled
media: Remove the legacy v4l2-clk API
media: ov6650: Use the generic clock framework
media: mt9m111: Use the generic clock framework
media: ov9640: Use the generic clock framework
media: pxa_camera: Drop the v4l2-clk clock register
media: mach-pxa: Register the camera sensor fixed-rate clock
media: i2c: imx258: get clock from device properties and enable it via runtime PM
media: i2c: imx258: simplify getting state container
media: i2c: imx258: add support for binding via device tree
media: dt-bindings: media: imx258: add bindings for IMX258 sensor
...
At the moment the function device_del() is calling
device_remove_properties() unconditionally. That will result into the
reference count of the software node attached to the device being
decremented, and in most cases it will hit 0 at that point. So in
practice device_del() will unregister the software node attached to
the device, even if that was not the intention of the caller. Right
now software nodes can not be reused or shared because of that.
So device_del() can not unregister the software nodes unconditionally
like that. Unfortunately some of the users of device_add_properties()
are now relying on this behaviour. Because of that, and also in
general, we do need a function that can offer similar behaviour where
the lifetime of the software node is bound to the lifetime of the
device. But it just has to be a separate function so the behaviour is
optional. We can not remove the device_remove_properties() call from
device_del() before we have that new function, and before we have
replaced device_add_properties() calls with it in all the places that
require that behaviour.
This adds function device_create_managed_software_node() that can be
used for exactly that purpose. Software nodes created with it are
declared "managed", and separate handling for those nodes is added to
the software node code. The reference count of the "managed" nodes is
decremented when the device they are attached to is removed. This will
not affect the other nodes that are not declared "managed".
The function device_create_managed_software_node() has also one
additional feature that device_add_properties() does not have. It
allows the software nodes created with it to be part of a node
hierarchy by taking also an optional parent node as parameter.
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20210204141711.53775-2-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This implements the remaining .graph_*() callbacks in the fwnode
operations structure for the software nodes. That makes the
fwnode_graph_*() functions available in the drivers also when software
nodes are used.
The implementation tries to mimic the "OF graph" as much as possible, but
there is no support for the "reg" device property. The ports will need to
have the index in their name which starts with "port@" (for example
"port@0", "port@1", ...) and endpoints will use the index of the software
node that is given to them during creation. The port nodes can also be
grouped under a specially named "ports" subnode, just like in DT, if
necessary.
The remote-endpoints are reference properties under the endpoint nodes
that are named "remote-endpoint".
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Co-developed-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
To maintain consistency with software_node_unregister_nodes(), reverse
the order in which the software_node_unregister_node_group() function
unregisters nodes.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Registering software_nodes with the .parent member set to point to a
currently unregistered software_node has the potential for problems,
so enforce parent -> child ordering in arrays passed in to
software_node_register_nodes().
Software nodes that are children of another software node should be
unregistered before their parent. To allow easy unregistering of an array
of software_nodes ordered parent to child, reverse the order in which
software_node_unregister_nodes() unregisters software_nodes.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The software_node_get_next_child() function currently does not hold
references to the child software_node that it finds or put the ref that
is held against the old child - fix that.
Fixes: 59abd83672 ("drivers: base: Introducing software nodes to the firmware node framework")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This helper will register a software node and then assign
it to device at the same time. The function will also make
sure that the device can't have more than one software node.
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20210115094914.88401-2-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are multiple locations in the kernel where a struct fwnode_handle
is initialized. Add fwnode_init() so that we have one way of
initializing a fwnode_handle.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20201121020232.908850-8-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After the commit
46d26819a5 ("software node: implement software_node_unregister()")
has been applied a new helper appears that may be utilised in other places.
For time being there is one such place, i.e. in
software_node_unregister_node_group() which will benefit of the clean up.
Use software_node_unregister() when unregistering group of nodes.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200622082108.25577-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here is the set of driver core patches for 5.8-rc1.
Not all that huge this release, just a number of small fixes and
updates:
- software node fixes
- kobject now sends KOBJ_REMOVE when it is removed from sysfs,
not when it is removed from memory (which could come much
later)
- device link additions and fixes based on testing on more
devices
- firmware core cleanups
- other minor changes, full details in the shortlog
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXtzmXg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymaAQCfZZ9prH3AMLF7DIkG3vMw0njLXt0An2FxrKYU
wetHRG4KL9vTkdz7+TqU
=t5LE
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core patches for 5.8-rc1.
Not all that huge this release, just a number of small fixes and
updates:
- software node fixes
- kobject now sends KOBJ_REMOVE when it is removed from sysfs, not
when it is removed from memory (which could come much later)
- device link additions and fixes based on testing on more devices
- firmware core cleanups
- other minor changes, full details in the shortlog
All have been in linux-next for a while with no reported issues"
* tag 'driver-core-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (23 commits)
driver core: Update device link status correctly for SYNC_STATE_ONLY links
firmware_loader: change enum fw_opt to u32
software node: implement software_node_unregister()
kobject: send KOBJ_REMOVE uevent when the object is removed from sysfs
driver core: Remove unnecessary is_fwnode_dev variable in device_add()
drivers property: When no children in primary, try secondary
driver core: platform: Fix spelling errors in platform.c
driver core: Remove check in driver_deferred_probe_force_trigger()
of: platform: Batch fwnode parsing when adding all top level devices
driver core: fw_devlink: Add support for batching fwnode parsing
driver core: Look for waiting consumers only for a fwnode's primary device
driver core: Move code to the right part of the file
Revert "Revert "driver core: Set fw_devlink to "permissive" behavior by default""
drivers: base: Fix NULL pointer exception in __platform_driver_probe() if a driver developer is foolish
firmware_loader: move fw_fallback_config to a private kernel symbol namespace
driver core: Add missing '\n' in log messages
driver/base/soc: Use kobj_to_dev() API
Add documentation on meaning of -EPROBE_DEFER
driver core: platform: remove redundant assignment to variable ret
debugfs: Use the correct style for SPDX License Identifier
...
Sometimes it is better to unregister individual nodes instead of trying
to do them all at once with software_node_unregister_nodes(), so create
software_node_unregister() so that you can unregister them one at a
time.
This is especially important when creating nodes in a hierarchy, with
parent -> children representations. Children always need to be removed
before a parent is, as the swnode logic assumes this is going to be the
case.
Fix up the lib/test_printf.c fwnode_pointer() test which to use this new
function as it had the problem of tearing things down in the backwards
order.
Fixes: f1ce39df50 ("lib/test_printf: Add tests for %pfw printk modifier")
Cc: stable <stable@vger.kernel.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: kernel test robot <rong.a.chen@intel.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Petr Mladek <pmladek@suse.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20200524153041.2361-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sometimes it's more convenient to register a set of individual software nodes
grouped together. Add couple of functions for that.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
This reverts commit 3df85a1ae5.
The reverted commit says "It's possible to release the node ID
immediately when fwnode_remove_software_node() is called, no need to
wait for software_node_release() with that." However, releasing the node
ID before waiting for software_node_release() to be called causes the
node ID to be released before the kobject and the underlying sysfs
entry; this means there is a period of time where a sysfs entry exists
that is associated with an unallocated node ID.
Once consequence of this is that there is a race condition where it is
possible to call fwnode_create_software_node() with no parent node
specified (NULL) and have it fail with -EEXIST because the node ID that
was assigned is still associated with a stale sysfs entry that hasn't
been cleaned up yet.
Although it is difficult to reproduce this race condition under normal
conditions, it can be deterministically reproduced with the following
minconfig on UML:
CONFIG_KUNIT_DRIVER_PE_TEST=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_TIMERS=y
CONFIG_DEBUG_KOBJECT_RELEASE=y
CONFIG_KUNIT=y
Running the tests with this configuration causes the following failure:
<snip>
kobject: 'node0' ((____ptrval____)): kobject_release, parent (____ptrval____) (delayed 400)
ok 1 - pe_test_uints
sysfs: cannot create duplicate filename '/kernel/software_nodes/node0'
CPU: 0 PID: 28 Comm: kunit_try_catch Not tainted 5.6.0-rc3-next-20200227 #14
<snip>
kobject_add_internal failed for node0 with -EEXIST, don't try to register things with the same name in the same directory.
kobject: 'node0' ((____ptrval____)): kobject_release, parent (____ptrval____) (delayed 100)
# pe_test_uint_arrays: ASSERTION FAILED at drivers/base/test/property-entry-test.c:123
Expected node is not error, but is: -17
not ok 2 - pe_test_uint_arrays
<snip>
Reported-by: Heidi Fahim <heidifahim@google.com>
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: 5.3+ <stable@vger.kernel.org> # 5.3+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Now that all users of references have moved to reference properties,
we can remove separate handling of references.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It is possible to store references to software nodes in the same fashion as
other static properties, so that users do not need to define separate
structures:
static const struct software_node gpio_bank_b_node = {
.name = "B",
};
static const struct property_entry simone_key_enter_props[] = {
PROPERTY_ENTRY_U32("linux,code", KEY_ENTER),
PROPERTY_ENTRY_STRING("label", "enter"),
PROPERTY_ENTRY_REF("gpios", &gpio_bank_b_node, 123, GPIO_ACTIVE_LOW),
{ }
};
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
We should not conflate whether a property data is an array or a single
value with where it is stored (embedded into property_entry structure or
out-of-line). All single-value properties are in effect 1-element
arrays, and we can figure the amount of data stored in a property by
examining its length and the data type. And arrays can be as easily
stored in property entry instances as single values are, provided that
we have enough space (we have up to 8 bytes). We can embed:
- up to 8 bytes from U8 arrays
- up to 4 words
- up to 2 double words
- one U64 value
- one (on 64 bit architectures) or 2 (on 32 bit) strings.
This change also has an effect of switching properties with small amount
of data to embed it instead of keeping it separate when copying such
properties.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
We do not need a special flag to know if we are dealing with an
array, as we can get that data from ratio between element length and
the data size, but we do need a flag to know whether or not the data
is stored directly inside property_entry.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
[ rjw: Subject & changelog, struct property_entry kerneldoc ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There is no need to treat string arrays and single strings separately, we can go
exclusively by the element length in relation to data type size.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There is absolutely no reason to have them as we can handle it all nicely in
property_entry_read_int_array().
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Instead of explicitly setting values of integer types when copying
property entries lets just copy entire value union when processing
non-array values.
For value arrays we no longer use union of pointers, but rather a single
void pointer, which allows us to remove property_set_pointer().
In property_get_pointer() we do not need to handle each data type
separately, we can simply return either the pointer or pointer to values
union.
We are not losing anything from removing typed pointer union because the
upper layers do their accesses through void pointers anyway, and we
trust the "type" of the property when interpret the data. We rely on
users of property entries on using PROPERTY_ENTRY_XXX() macros to
properly initialize entries instead of poking in the instances directly.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Because property_copy_string_array() stores the newly allocated pointer in the
destination property, we have an awkward code in property_entry_copy_data()
where we fetch the new pointer from dst.
Let's change property_copy_string_array() to return pointer and rely on the
common path in property_entry_copy_data() to store it in destination structure.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The prefix is used for printing purpose before a node, and it also works
as a separator between two nodes.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Rob Herring <robh@kernel.org> (for OF)
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The fwnode framework did not have means to obtain the name of a node. Add
that now, in form of the fwnode_get_name() function and a corresponding
get_name fwnode op. OF and ACPI support is included.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Rob Herring <robh@kernel.org> (for OF)
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
to_software_node() does not need to modify the fwnode_handle it operates
on; therefore make it const. This allows passing a const fwnode_handle to
to_software_node().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The software_node_get_parent() returned a pointer to the parent swnode,
but did not take a reference to it, leading the caller to put a reference
that was not taken. Take that reference now.
Fixes: 59abd83672 ("drivers: base: Introducing software nodes to the firmware node framework")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The software node is searched from a list that may be empty
when the function is called. This makes sure that the
function returns NULL if the list is empty.
Fixes: 1666faedb5 ("software node: Add software_node_find_by_name()")
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The software node is searched from a list that may be empty
when the function is called. This makes sure that the
function returns NULL even if the list is empty.
Fixes: 80488a6b1d ("software node: Add support for static node descriptors")
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Function that searches software nodes by node name.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This makes it possible to support drivers that use
fwnode_property_get_reference_args() function.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Using the kobject name of the node instead of a device
property "name" in software_node_get_named_child_node().
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Until now the software nodes could only be created
dynamically with fwnode_create_software_node() function.
This introduces struct software_node data structure, which
makes it possible to describe the software nodes also
statically.
The statically described software nodes can be registered
with a new function fwnode_register_software_node(). This
also adds a helper fwnode_register_software_nodes()
which makes it possible to register an array of struct
software_nodes, i.e. multiple nodes at the same time.
There is no difference between statically described and
dynamically allocated software nodes. Even the registration
does not differ, except that during node creation the device
properties are only copied if the node is created
dynamically. With statically described nodes, the property
entries in the descriptor (struct software_node) are
assigned directly to the new software node that is being
created without any copies.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It's possible to release the node ID immediately when
fwnode_remove_software_node() is called, no need to wait for
software_node_release() with that.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Software nodes are not forced to have device properties.
Adding check to property_entries_dup() to make it possible
to create software nodes that don't have any properties.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix sparse warning:
drivers/base/swnode.c:475:22: warning: symbol 'software_node_get_parent' was not declared. Should it be static?
drivers/base/swnode.c:484:22: warning: symbol 'software_node_get_next_child' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This makes it possible to support drivers that use
fwnode_get_named_child_node() and device_get_named_child_node()
functions.
The node name is for now taken from a device property named
"name". That mimics the old style of naming of the nodes in
devicetree (though with modern flattened DT, the name is
matched against the actual node-name, it used to be done
with a property "name"). In Open Firmware DT the "name"
property is also still being used.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The to_software_mode() macro can potentially return NULL, so also add
a NULL check on swnode before dereferencing it to avoid any NULL
pointer dereferences.
Detected by CoverityScan, CID#1476052 ("Explicit null dereferenced")
Fixes: 59abd83672 (drivers: base: Introducing software nodes to the firmware node framework)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The pointer p can be potentially NULL as macro to_software_node can
return NULL.
Add null check on p before dereferencing it to avoid any NULL pointer
dereferences.
Detected by CoverityScan, CID#1476039 ("Explicit null dereferenced")
Fixes: 59abd83672 (drivers: base: Introducing software nodes to the firmware node framework)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently the node name is being formatting into a temporary string
node_name, however, kobject_init_and_add allows one to format up
a node name, so use that instead. This removes the need for the
node_name string and also cleans up the following warning:
Fixes clang warning:
warning: format string is not a string literal (potentially
insecure) [-Wformat-security]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Concentrating struct property_entry processing to
drivers/base/swnode.c
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Software node is a new struct fwnode_handle type that can be
used to describe devices in kernel (software). It is meant
to complement fwnodes representing real firmware nodes when
they are incomplete (for example missing device properties)
and to supply the primary fwnode when the firmware lacks
hardware description for a device completely.
The software node type is really meant to replace the
currently used "property_set" struct fwnode_handle type. The
handling of struct property_set is glued to the generic
device property handling code, and it is not possible to
create a struct property_set independently from the device
that it is bind to. struct property_set is only created when
device properties are added to already initialized struct
device, and control of it is only possible from the generic
property handling code.
Software nodes are instead designed to be created
independently from the device entries (struct device). It
makes them much more flexible, as then the device meant to
be bind to the node can be created at a later time, and from
another location. It is also possible to bind multiple
devices to a single software node if needed.
The software node implementation also includes support for
node hierarchy, which was the main motivation for this
commit. The node hierarchy was something that was requested
for the struct property_set, but it did not seem reasonable
to try to extend the property_set support for that purpose.
struct property_set was really meant only for device
property handling like the name suggests.
Support for struct property_set is not yet removed in this
commit, but it will be in the following one.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Andy Shevchenko