Fix the wrong input in for config_cb. In function vhost_vdpa_config_cb,
the input cb.private was used as struct vhost_vdpa, so the input was
wrong here, fix this issue
Fixes: 776f395004 ("vhost_vdpa: Support config interrupt in vdpa")
Signed-off-by: Cindy Lu <lulu@redhat.com>
Link: https://lore.kernel.org/r/20210929090933.20465-1-lulu@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently we unset vq irq after freeing irq and that will result in
error messages:
pi_update_irte: failed to update PI IRTE
irq bypass consumer (token 000000005a07a12b) unregistration fails: -22
This patch solves this.
Signed-off-by: Wu Zongyong <wuzongyong@linux.alibaba.com>
Link: https://lore.kernel.org/r/02637d38dcf4e4b836c5b3a65055fe92bf812b3b.1631687872.git.wuzongyong@linux.alibaba.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
The concern here is that "ret" can be uninitialized if we hit the
"goto next" condition on every iteration through the loop.
Fixes: 41ba1b5f9d4b ("vdpa: Support transferring virtual addressing during DMA mapping")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20210907073253.GB18254@kili
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
This patch introduces an attribute for vDPA device to indicate
whether virtual address can be used. If vDPA device driver set
it, vhost-vdpa bus driver will not pin user page and transfer
userspace virtual address instead of physical address during
DMA mapping. And corresponding vma->vm_file and offset will be
also passed as an opaque pointer.
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210831103634.33-11-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The upcoming patch is going to support VA mapping/unmapping.
So let's factor out the logic of PA mapping/unmapping firstly
to make the code more readable.
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210831103634.33-10-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add an opaque pointer for DMA mapping.
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210831103634.33-9-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The vdpa_reset() may fail now. This adds check to its return
value and fail the vhost_vdpa_open().
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210831103634.33-7-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This adds a new callback to support device specific reset
behavior. The vdpa bus driver will call the reset function
instead of setting status to zero during resetting.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Link: https://lore.kernel.org/r/20210831103634.33-6-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it's a nice refactor to make use of
PFN_PHYS/PFN_UP/PFN_DOWN helper macro
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20210802013717.851-1-caihuoqing@baidu.com
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The "msg->iova + msg->size" addition can have an integer overflow
if the iotlb message is from a malicious user space application.
So let's fix it.
Fixes: 1b48dc03e5 ("vhost: vdpa: report iova range")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210728130756.97-1-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch extends the vdpa_vq_state to support packed virtqueue
state which is basically the device/driver ring wrap counters and the
avail and used index. This will be used for the virito-vdpa support
for the packed virtqueue and the future vhost/vhost-vdpa support for
the packed virtqueue.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210602021536.39525-2-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
A bunch of new drivers including vdpa support for block
and virtio-vdpa. Beginning of vq kick (aka doorbell) mapping support.
Misc fixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmCRBBEPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpiCIH/iNNTeyl4hZJ8IOTlqTagjZgUBYslpda66pU
XfGKmXWpCGHYSw0XgbfHDyTZTCmdyq/b4FrxPgYrrEsQqztLIaGHyapHPcXEAThb
+pHtcxqsQ8DGucJZpNU44M3kB13u07gauR540HyXzEqLXd5vEhG7dkClBjm67TWN
SbJoEP3eNJMUezYuGsmUAGoi/M9NyCx+RiLd7roIlTxhIDW17PFNY0sIgG/sX6/s
1MXng0l00EjawIu4OnWfjg6kZoa6se41Rpcwd7XluTZncYKnMTJGoxDwv0xoJl4I
pI5OS+Ea6ENuuygmYMEl294I5E0QeaMGFpEYyO9sm764K5bLjVw=
=x0Ot
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"A bunch of new drivers including vdpa support for block and
virtio-vdpa.
Beginning of vq kick (aka doorbell) mapping support.
Misc fixes"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (40 commits)
virtio_pci_modern: correct sparse tags for notify
virtio_pci_modern: __force cast the notify mapping
vDPA/ifcvf: get_config_size should return dev specific config size
vDPA/ifcvf: enable Intel C5000X-PL virtio-block for vDPA
vDPA/ifcvf: deduce VIRTIO device ID when probe
vdpa_sim_blk: add support for vdpa management tool
vdpa_sim_blk: handle VIRTIO_BLK_T_GET_ID
vdpa_sim_blk: implement ramdisk behaviour
vdpa: add vdpa simulator for block device
vhost/vdpa: Remove the restriction that only supports virtio-net devices
vhost/vdpa: use get_config_size callback in vhost_vdpa_config_validate()
vdpa: add get_config_size callback in vdpa_config_ops
vdpa_sim: cleanup kiovs in vdpasim_free()
vringh: add vringh_kiov_length() helper
vringh: implement vringh_kiov_advance()
vringh: explain more about cleaning riov and wiov
vringh: reset kiov 'consumed' field in __vringh_iov()
vringh: add 'iotlb_lock' to synchronize iotlb accesses
vdpa_sim: use iova module to allocate IOVA addresses
vDPA/ifcvf: deduce VIRTIO device ID from pdev ids
...
Since the config checks are done by the vDPA drivers, we can remove the
virtio-net restriction and we should be able to support all kinds of
virtio devices.
<linux/virtio_net.h> is not needed anymore, but we need to include
<linux/slab.h> to avoid compilation failures.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210315163450.254396-11-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Let's use the new 'get_config_size()' callback available instead of
using the 'virtio_id' to get the size of the device config space.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210315163450.254396-10-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
The virtqueue doorbell is usually implemented via registeres but we
don't provide the necessary vma->flags like VM_PFNMAP. This may cause
several issues e.g when userspace tries to map the doorbell via vhost
IOTLB, kernel may panic due to the page is not backed by page
structure. This patch fixes this by setting the necessary
vm_flags. With this patch, try to map doorbell via IOTLB will fail
with bad address.
Cc: stable@vger.kernel.org
Fixes: ddd89d0a05 ("vhost_vdpa: support doorbell mapping via mmap")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210413091557.29008-1-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Including:
- Big cleanup of almost unsused parts of the IOMMU API by
Christoph Hellwig. This mostly affects the Freescale PAMU
driver.
- New IOMMU driver for Unisoc SOCs
- ARM SMMU Updates from Will:
- SMMUv3: Drop vestigial PREFETCH_ADDR support
- SMMUv3: Elide TLB sync logic for empty gather
- SMMUv3: Fix "Service Failure Mode" handling
- SMMUv2: New Qualcomm compatible string
- Removal of the AMD IOMMU performance counter writeable check
on AMD. It caused long boot delays on some machines and is
only needed to work around an errata on some older (possibly
pre-production) chips. If someone is still hit by this
hardware issue anyway the performance counters will just
return 0.
- Support for targeted invalidations in the AMD IOMMU driver.
Before that the driver only invalidated a single 4k page or the
whole IO/TLB for an address space. This has been extended now
and is mostly useful for emulated AMD IOMMUs.
- Several fixes for the Shared Virtual Memory support in the
Intel VT-d driver
- Mediatek drivers can now be built as modules
- Re-introduction of the forcedac boot option which got lost
when converting the Intel VT-d driver to the common dma-iommu
implementation.
- Extension of the IOMMU device registration interface and
support iommu_ops to be const again when drivers are built as
modules.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAmCMEIoACgkQK/BELZcB
GuOu9xAAvg6aR0uHlxvRq6cgNnHN9Ltp5+t3qFYtRRrauY0iOPMO62k0QQli5shX
CGeczD0e59KAZqI0zNJnQn8hMY5dg7XVkFCC5BrSzuCDCtwJZ0N5Tq3pfUlaV1rw
BJf41t79Fd+jp7kn53tu+vRAfYZ3+sLOx/6U3c15pqKRZSkyFWbQllOtD3J5LnLu
1PyPlfiNpMwCajiS7aQbN+fuJ/lKIFeA2MDPOsCBzhbfxiJUqJxZOKAZO3rOjFfK
feTibqQ+3Zz6MPXt9st1cvPpy8jCosv81OY6Knqvxf/oB5q+fEdi2uNrKISonb/t
Fw331oOIwg2A+HOpwC9MN1AumOIqiHSWWENAMk9SlP+TMIWKQ8kZreyI6IEB23dV
+QvP3DVA+CfLwtNY/Zh0IqKh28D+IHlKbpWNU1m+9AUe468mV/MTjfwxr9Yfffhm
LZ6C0DgFdmtqv8jPuDGUOgo3RNeN8bLnUSEHG9gHibA+RKujl5BWDjKkwILqMQTt
Ysdsu8TiNtFIULomizqCpgqEbQfW8TLFvASXCM1VMQ/PDURxvchZPxFDJonYXy+K
z2HGaG3eUE07YrAdRKH69aMVIbmS+sjEhvmi4xZ1Lh7wWcIE2AZVvO8qNb+Ckcp3
4tLPPDksm/iQngnFf6gdgH3qv4rgbzE4+74GXqeANiQCjY9dSJI=
=qF2C
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Big cleanup of almost unsused parts of the IOMMU API by Christoph
Hellwig. This mostly affects the Freescale PAMU driver.
- New IOMMU driver for Unisoc SOCs
- ARM SMMU Updates from Will:
- Drop vestigial PREFETCH_ADDR support (SMMUv3)
- Elide TLB sync logic for empty gather (SMMUv3)
- Fix "Service Failure Mode" handling (SMMUv3)
- New Qualcomm compatible string (SMMUv2)
- Removal of the AMD IOMMU performance counter writeable check on AMD.
It caused long boot delays on some machines and is only needed to
work around an errata on some older (possibly pre-production) chips.
If someone is still hit by this hardware issue anyway the performance
counters will just return 0.
- Support for targeted invalidations in the AMD IOMMU driver. Before
that the driver only invalidated a single 4k page or the whole IO/TLB
for an address space. This has been extended now and is mostly useful
for emulated AMD IOMMUs.
- Several fixes for the Shared Virtual Memory support in the Intel VT-d
driver
- Mediatek drivers can now be built as modules
- Re-introduction of the forcedac boot option which got lost when
converting the Intel VT-d driver to the common dma-iommu
implementation.
- Extension of the IOMMU device registration interface and support
iommu_ops to be const again when drivers are built as modules.
* tag 'iommu-updates-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (84 commits)
iommu: Streamline registration interface
iommu: Statically set module owner
iommu/mediatek-v1: Add error handle for mtk_iommu_probe
iommu/mediatek-v1: Avoid build fail when build as module
iommu/mediatek: Always enable the clk on resume
iommu/fsl-pamu: Fix uninitialized variable warning
iommu/vt-d: Force to flush iotlb before creating superpage
iommu/amd: Put newline after closing bracket in warning
iommu/vt-d: Fix an error handling path in 'intel_prepare_irq_remapping()'
iommu/vt-d: Fix build error of pasid_enable_wpe() with !X86
iommu/amd: Remove performance counter pre-initialization test
Revert "iommu/amd: Fix performance counter initialization"
iommu/amd: Remove duplicate check of devid
iommu/exynos: Remove unneeded local variable initialization
iommu/amd: Page-specific invalidations for more than one page
iommu/arm-smmu-v3: Remove the unused fields for PREFETCH_CONFIG command
iommu/vt-d: Avoid unnecessary cache flush in pasid entry teardown
iommu/vt-d: Invalidate PASID cache when root/context entry changed
iommu/vt-d: Remove WO permissions on second-level paging entries
iommu/vt-d: Report the right page fault address
...
Protect vhost device iotlb by vhost_dev->mutex. Otherwise,
it might cause corruption of the list and interval tree in
struct vhost_iotlb if userspace sends the VHOST_IOTLB_MSG_V2
message concurrently.
Fixes: 4c8cf318("vhost: introduce vDPA-based backend")
Cc: stable@vger.kernel.org
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210412095512.178-1-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The geometry information can be trivially queried from the iommu_domain
struture.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-16-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In vhost_vdpa_set_config_call() if eventfd_ctx_fdget() fails the
'v->config_ctx' contains an error instead of a valid pointer.
Since we consider 'v->config_ctx' valid if it is not NULL, we should
set it to NULL in this case to avoid to use an invalid pointer in
other functions such as vhost_vdpa_config_put().
Fixes: 776f395004 ("vhost_vdpa: Support config interrupt in vdpa")
Cc: lingshan.zhu@intel.com
Cc: stable@vger.kernel.org
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210311135257.109460-3-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
When the 'v->config_ctx' eventfd_ctx reference is released we didn't
set it to NULL. So if the same character device (e.g. /dev/vhost-vdpa-0)
is re-opened, the 'v->config_ctx' is invalid and calling again
vhost_vdpa_config_put() causes use-after-free issues like the
following refcount_t underflow:
refcount_t: underflow; use-after-free.
WARNING: CPU: 2 PID: 872 at lib/refcount.c:28 refcount_warn_saturate+0xae/0xf0
RIP: 0010:refcount_warn_saturate+0xae/0xf0
Call Trace:
eventfd_ctx_put+0x5b/0x70
vhost_vdpa_release+0xcd/0x150 [vhost_vdpa]
__fput+0x8e/0x240
____fput+0xe/0x10
task_work_run+0x66/0xa0
exit_to_user_mode_prepare+0x118/0x120
syscall_exit_to_user_mode+0x21/0x50
? __x64_sys_close+0x12/0x40
do_syscall_64+0x45/0x50
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: 776f395004 ("vhost_vdpa: Support config interrupt in vdpa")
Cc: lingshan.zhu@intel.com
Cc: stable@vger.kernel.org
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210311135257.109460-2-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Zhu Lingshan <lingshan.zhu@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
When qemu with vhost-vdpa netdevice is run for the first time,
it works well. But after the VM is powered off, the next qemu run
causes kernel panic due to a NULL pointer dereference in
irq_bypass_register_producer().
When the VM is powered off, vhost_vdpa_clean_irq() misses on calling
irq_bypass_unregister_producer() for irq 0 because of the existing check.
This leaves stale producer nodes, which are reset in
vhost_vring_call_reset() when vhost_dev_init() is invoked during the
second qemu run.
As the node member of struct irq_bypass_producer is also initialized
to zero, traversal on the producers list causes crash due to NULL
pointer dereference.
Fixes: 2cf1ba9a4d ("vhost_vdpa: implement IRQ offloading in vhost_vdpa")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=211711
Signed-off-by: Gautam Dawar <gdawar.xilinx@gmail.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210224114845.104173-1-gdawar.xilinx@gmail.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The copy_to_user() function returns the number of bytes remaining to be
copied but this should return -EFAULT to the user.
Fixes: 1b48dc03e5 ("vhost: vdpa: report iova range")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/X8c32z5EtDsMyyIL@mwanda
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Pinned pages are not properly accounted particularly when
mapping error occurs on IOTLB update. Clean up dangling
pinned pages for the error path.
The memory usage for bookkeeping pinned pages is reverted
to what it was before: only one single free page is needed.
This helps reduce the host memory demand for VM with a large
amount of memory, or in the situation where host is running
short of free memory.
Fixes: 4c8cf31885 ("vhost: introduce vDPA-based backend")
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Link: https://lore.kernel.org/r/1604618793-4681-1-git-send-email-si-wei.liu@oracle.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
LKP considered variable 'ret' in vhost_vdpa_setup_vq_irq() as
a unused variable, so suggest we remove it. Actually it stores
return value of irq_bypass_register_producer(), but we did not
check it, we should handle the failure case.
This commit will print a message if irq bypass register producer
fail, in this case, vqs still remain functional.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20201023104046.404794-1-lingshan.zhu@intel.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
This reverts commit 7ed9e3d97c.
The patch creates a DoS risk since it can result in a high order memory
allocation.
Fixes: 7ed9e3d97c ("vhost-vdpa: fix page pinning leakage in error path")
Cc: stable@vger.kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The copy_to/from_user() functions return the number of bytes which we
weren't able to copy but the ioctl should return -EFAULT if they fail.
Fixes: a127c5bbb6 ("vhost-vdpa: fix backend feature ioctls")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20201023120853.GI282278@mwanda
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cc: stable@vger.kernel.org
Acked-by: Jason Wang <jasowang@redhat.com>
This patch introduces a new ioctl for vhost-vdpa device that can
report the iova range by the device.
For device that implements get_iova_range() method, we fetch it from
the vDPA device. If device doesn't implement get_iova_range() but
depends on platform IOMMU, we will query via DOMAIN_ATTR_GEOMETRY,
otherwise [0, ULLONG_MAX] is assumed.
For safety, this patch also rules out the map request which is not in
the valid range.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20201023090043.14430-3-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit removed unnecessary spin_locks in vhost_vring_call
and related operations. Because we manipulate irq offloading
contents in vhost_vdpa ioctl code path which is already
protected by dev mutex and vq mutex.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Link: https://lore.kernel.org/r/20200909065234.3313-1-lingshan.zhu@intel.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Pinned pages are not properly accounted particularly when
mapping error occurs on IOTLB update. Clean up dangling
pinned pages for the error path. As the inflight pinned
pages, specifically for memory region that strides across
multiple chunks, would need more than one free page for
book keeping and accounting. For simplicity, pin pages
for all memory in the IOVA range in one go rather than
have multiple pin_user_pages calls to make up the entire
region. This way it's easier to track and account the
pages already mapped, particularly for clean-up in the
error path.
Fixes: 4c8cf31885 ("vhost: introduce vDPA-based backend")
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Link: https://lore.kernel.org/r/1601701330-16837-3-git-send-email-si-wei.liu@oracle.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We must free the vqs array in the open failure path, because
vhost_vdpa_release will not be called.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/1600712588-9514-2-git-send-email-michael.christie@oracle.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Commit 653055b9ac ("vhost-vdpa: support get/set backend features")
introduces two malfunction backend features ioctls:
1) the ioctls was blindly added to vring ioctl instead of vdpa device
ioctl
2) vhost_set_backend_features() was called when dev mutex has already
been held which will lead a deadlock
This patch fixes the above issues.
Cc: Eli Cohen <elic@nvidia.com>
Reported-by: Zhu Lingshan <lingshan.zhu@intel.com>
Fixes: 653055b9ac ("vhost-vdpa: support get/set backend features")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20200907104343.31141-1-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Modify get_vq_state() so it returns an error code. In case of hardware
acceleration, the available index may be retrieved from the device, an
operation that can possibly fail.
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Eli Cohen <eli@mellanox.com>
Link: https://lore.kernel.org/r/20200804162048.22587-9-eli@mellanox.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
For now VQ state involves 16 bit available index value encoded in u64
variable. In the future it will be extended to contain more fields. Use
struct to contain the state, now containing only a single u16 for the
available index. In the future we can add fields to this struct.
Reviewed-by: Parav Pandit <parav@mellanox.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eli Cohen <eli@mellanox.com>
Link: https://lore.kernel.org/r/20200804162048.22587-8-eli@mellanox.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This will enable vdpa providers to add support for multi queue feature
and publish it to upper layers (vhost and virtio).
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20200804162048.22587-7-eli@mellanox.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patches extend the vhost IOTLB API to accept batch updating hints
form userspace. When userspace wants update the device IOTLB in a
batch, it may do:
1) Write vhost_iotlb_msg with VHOST_IOTLB_BATCH_BEGIN flag
2) Perform a batch of IOTLB updating via VHOST_IOTLB_UPDATE/INVALIDATE
3) Write vhost_iotlb_msg with VHOST_IOTLB_BATCH_END flag
Vhost-vdpa may decide to batch the IOMMU/IOTLB updating in step 3 when
vDPA device support set_map() ops. This is useful for the vDPA device
that want to know all the mappings to tweak their own DMA translation
logic.
For vDPA device that doesn't require set_map(), no behavior changes.
This capability is advertised via VHOST_BACKEND_F_IOTLB_BATCH capability.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20200804162048.22587-5-eli@mellanox.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch makes userspace can get and set backend features to
vhost-vdpa.
Signed-off-by: Cindy Lu <lulu@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20200804162048.22587-4-eli@mellanox.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
IRQ of a vq is not expected to be changed in a DRIVER_OK ~ !DRIVER_OK
period for irq offloading purposes. Place this comment at the side of
bus ops get_vq_irq than in set_status in vhost_vdpa.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Link: https://lore.kernel.org/r/20200804102123.69978-1-lingshan.zhu@intel.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch introduce a set of functions for setup/unsetup
and update irq offloading respectively by register/unregister
and re-register the irq_bypass_producer.
With these functions, this commit can setup/unsetup
irq offloading through setting DRIVER_OK/!DRIVER_OK, and
update irq offloading through SET_VRING_CALL.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Suggested-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20200731065533.4144-5-lingshan.zhu@intel.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit introduces struct vhost_vring_call which replaced
raw struct eventfd_ctx *call_ctx in struct vhost_virtqueue.
Besides eventfd_ctx, it contains a spin lock and an
irq_bypass_producer in its structure.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Suggested-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20200731065533.4144-2-lingshan.zhu@intel.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We used to have a per device feature whitelist to filter out the
unsupported virtio features. But this seems unnecessary since:
- the main idea behind feature whitelist is to block control vq
feature until we finalize the control virtqueue API. But the current
vhost-vDPA uAPI is sufficient to support control virtqueue. For
device that has hardware control virtqueue, the vDPA device driver
can just setup the hardware virtqueue and let userspace to use
hardware virtqueue directly. For device that doesn't have a control
virtqueue, the vDPA device driver need to use e.g vringh to emulate
a software control virtqueue.
- we don't do it in virtio-vDPA driver
So remove this limitation.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20200720085043.16485-1-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Rename the bit to match latest virtio spec.
Add a compat macro to avoid breaking existing userspace.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
The "vma->vm_pgoff" variable is an unsigned long so if it's larger than
INT_MAX then "index" can be negative leading to an underflow. Fix this
by changing the type of "index" to "unsigned long".
Fixes: ddd89d0a05 ("vhost_vdpa: support doorbell mapping via mmap")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20200610085852.GB5439@mwanda
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio-mem
doorbell mapping for vdpa
config interrupt support in ifc
fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl7fZ6APHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpkDoIAMcBcQx5su1iuX7vT35xzUWZO478eAf1jOMZ
7KxKUVBeztkcxVFUlRVRu9MR6wOzwHils+1HD6025775Smr5M6x3aJxR6xOORaBj
RoU6OVGkpDvbzsxlhW+xhONz4O7/RkveKJPCwzGjqHrsFeh92lkfTqroz/EuNpw+
LZsO0+DhdUf123HbwHQp5lxW8EjyrRabgeZZg/D9VLPhoCP88vCjRhBXU2GPuaUl
/UNXsQafn4xUgrxPaoN5f4Phn/P46NNrbZ1jmlkw/z/3QhF/DhktGXGaZsIHDCN/
vicUii0or5QLeBsZpMbKko/BIe2xWHxFjkMRhMOMZOfcBb6sMBI=
=auUa
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- virtio-mem: paravirtualized memory hotplug
- support doorbell mapping for vdpa
- config interrupt support in ifc
- fixes all over the place
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (40 commits)
vhost/test: fix up after API change
virtio_mem: convert device block size into 64bit
virtio-mem: drop unnecessary initialization
ifcvf: implement config interrupt in IFCVF
vhost: replace -1 with VHOST_FILE_UNBIND in ioctls
vhost_vdpa: Support config interrupt in vdpa
ifcvf: ignore continuous setting same status value
virtio-mem: Don't rely on implicit compiler padding for requests
virtio-mem: Try to unplug the complete online memory block first
virtio-mem: Use -ETXTBSY as error code if the device is busy
virtio-mem: Unplug subblocks right-to-left
virtio-mem: Drop manual check for already present memory
virtio-mem: Add parent resource for all added "System RAM"
virtio-mem: Better retry handling
virtio-mem: Offline and remove completely unplugged memory blocks
mm/memory_hotplug: Introduce offline_and_remove_memory()
virtio-mem: Allow to offline partially unplugged memory blocks
mm: Allow to offline unmovable PageOffline() pages via MEM_GOING_OFFLINE
virtio-mem: Paravirtualized memory hotunplug part 2
virtio-mem: Paravirtualized memory hotunplug part 1
...
Cindy Lu