Perf test 40 for example has several subtests numbered 1-4 when
displaying the start of the subtest. When the subtest results
are displayed the subtests are numbered 0-3.
Use this command to generate trace output:
[root@s35lp76 perf]# ./perf test -Fv 40 2>/tmp/bpf1
Fix this by adjusting the subtest number when show the
subtest result.
Output before:
[root@s35lp76 perf]# egrep '(^40\.[0-4]| subtest [0-4]:)' /tmp/bpf1
40.1: Basic BPF filtering :
BPF filter subtest 0: Ok
40.2: BPF pinning :
BPF filter subtest 1: Ok
40.3: BPF prologue generation :
BPF filter subtest 2: Ok
40.4: BPF relocation checker :
BPF filter subtest 3: Ok
[root@s35lp76 perf]#
Output after:
root@s35lp76 ~]# egrep '(^40\.[0-4]| subtest [0-4]:)' /tmp/bpf1
40.1: Basic BPF filtering :
BPF filter subtest 1: Ok
40.2: BPF pinning :
BPF filter subtest 2: Ok
40.3: BPF prologue generation :
BPF filter subtest 3: Ok
40.4: BPF relocation checker :
BPF filter subtest 4: Ok
[root@s35lp76 ~]#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180724134858.100644-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's no reason to have separate function to display clock events.
It's only purpose was to convert the nanosecond value into microseconds.
We do that now in generic code, if the unit and scale values are
properly set, which this patch do for clock events.
The output differs in the unit field being displayed in its columns
rather than having it added as a suffix of the event name. Plus the
value is rounded into 2 decimal numbers as for any other event.
Before:
# perf stat -e cpu-clock,task-clock -C 0 sleep 3
Performance counter stats for 'CPU(s) 0':
3001.123137 cpu-clock (msec) # 1.000 CPUs utilized
3001.133250 task-clock (msec) # 1.000 CPUs utilized
3.001159813 seconds time elapsed
Now:
# perf stat -e cpu-clock,task-clock -C 0 sleep 3
Performance counter stats for 'CPU(s) 0':
3,001.05 msec cpu-clock # 1.000 CPUs utilized
3,001.05 msec task-clock # 1.000 CPUs utilized
3.001077794 seconds time elapsed
There's a small difference in csv output, as we now output the unit
field, which was empty before. It's in the proper spot, so there's no
compatibility issue.
Before:
# perf stat -e cpu-clock,task-clock -C 0 -x, sleep 3
3001.065177,,cpu-clock,3001064187,100.00,1.000,CPUs utilized
3001.077085,,task-clock,3001077085,100.00,1.000,CPUs utilized
# perf stat -e cpu-clock,task-clock -C 0 -x, sleep 3
3000.80,msec,cpu-clock,3000799026,100.00,1.000,CPUs utilized
3000.80,msec,task-clock,3000799550,100.00,1.000,CPUs utilized
Add perf_evsel__is_clock to replace nsec_counter.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180720110036.32251-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use perf_evsel__match() helper in perf_evsel__is_bpf_output().
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180720110036.32251-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We occasionaly hit following assert failure in 'perf top', when processing the
/proc info in multiple threads.
perf: ...include/linux/refcount.h:109: refcount_inc:
Assertion `!(!refcount_inc_not_zero(r))' failed.
The gdb backtrace looks like this:
[Switching to Thread 0x7ffff11ba700 (LWP 13749)]
0x00007ffff50839fb in raise () from /lib64/libc.so.6
(gdb)
#0 0x00007ffff50839fb in raise () from /lib64/libc.so.6
#1 0x00007ffff5085800 in abort () from /lib64/libc.so.6
#2 0x00007ffff507c0da in __assert_fail_base () from /lib64/libc.so.6
#3 0x00007ffff507c152 in __assert_fail () from /lib64/libc.so.6
#4 0x0000000000535373 in refcount_inc (r=0x7fffdc009be0)
at ...include/linux/refcount.h:109
#5 0x00000000005354f1 in comm_str__get (cs=0x7fffdc009bc0)
at util/comm.c:24
#6 0x00000000005356bd in __comm_str__findnew (str=0x7fffd000b260 ":2",
root=0xbed5c0 <comm_str_root>) at util/comm.c:72
#7 0x000000000053579e in comm_str__findnew (str=0x7fffd000b260 ":2",
root=0xbed5c0 <comm_str_root>) at util/comm.c:95
#8 0x000000000053582e in comm__new (str=0x7fffd000b260 ":2",
timestamp=0, exec=false) at util/comm.c:111
#9 0x00000000005363bc in thread__new (pid=2, tid=2) at util/thread.c:57
#10 0x0000000000523da0 in ____machine__findnew_thread (machine=0xbfde38,
threads=0xbfdf28, pid=2, tid=2, create=true) at util/machine.c:457
#11 0x0000000000523eb4 in __machine__findnew_thread (machine=0xbfde38,
...
The failing assertion is this one:
REFCOUNT_WARN(!refcount_inc_not_zero(r), ...
The problem is that we keep global comm_str_root list, which
is accessed by multiple threads during the 'perf top' startup
and following 2 paths can race:
thread 1:
...
thread__new
comm__new
comm_str__findnew
down_write(&comm_str_lock);
__comm_str__findnew
comm_str__get
thread 2:
...
comm__override or comm__free
comm_str__put
refcount_dec_and_test
down_write(&comm_str_lock);
rb_erase(&cs->rb_node, &comm_str_root);
Because thread 2 first decrements the refcnt and only after then it removes the
struct comm_str from the list, the thread 1 can find this object on the list
with refcnt equls to 0 and hit the assert.
This patch fixes the thread 1 __comm_str__findnew path, by ignoring objects
that already dropped the refcnt to 0. For the rest of the objects we take the
refcnt before comparing its name and release it afterwards with comm_str__put,
which can also release the object completely.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Lukasz Odzioba <lukasz.odzioba@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20180720101740.GA27176@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's an issue with using threads::last_match in multithread mode
which is enabled during the perf top synthesize. It might crash with
following assertion:
perf: ...include/linux/refcount.h:109: refcount_inc:
Assertion `!(!refcount_inc_not_zero(r))' failed.
The gdb backtrace looks like this:
0x00007ffff50839fb in raise () from /lib64/libc.so.6
(gdb)
#0 0x00007ffff50839fb in raise () from /lib64/libc.so.6
#1 0x00007ffff5085800 in abort () from /lib64/libc.so.6
#2 0x00007ffff507c0da in __assert_fail_base () from /lib64/libc.so.6
#3 0x00007ffff507c152 in __assert_fail () from /lib64/libc.so.6
#4 0x0000000000535ff9 in refcount_inc (r=0x7fffe8009a70)
at ...include/linux/refcount.h:109
#5 0x0000000000536771 in thread__get (thread=0x7fffe8009a40)
at util/thread.c:115
#6 0x0000000000523cd0 in ____machine__findnew_thread (machine=0xbfde38,
threads=0xbfdf28, pid=2, tid=2, create=true) at util/machine.c:432
#7 0x0000000000523eb4 in __machine__findnew_thread (machine=0xbfde38,
pid=2, tid=2) at util/machine.c:489
#8 0x0000000000523f24 in machine__findnew_thread (machine=0xbfde38,
pid=2, tid=2) at util/machine.c:499
#9 0x0000000000526fbe in machine__process_fork_event (machine=0xbfde38,
...
The failing assertion is this one:
REFCOUNT_WARN(!refcount_inc_not_zero(r), ...
the problem is that we don't serialize access to threads::last_match.
We serialize the access to the threads tree, but we don't care how's
threads::last_match being accessed. Both locked/unlocked paths use
that data and can set it. In multithreaded mode we can end up with
invalid object in thread__get call, like in following paths race:
thread 1
...
machine__findnew_thread
down_write(&threads->lock);
__machine__findnew_thread
____machine__findnew_thread
th = threads->last_match;
if (th->tid == tid) {
thread__get
thread 2
...
machine__find_thread
down_read(&threads->lock);
__machine__findnew_thread
____machine__findnew_thread
th = threads->last_match;
if (th->tid == tid) {
thread__get
thread 3
...
machine__process_fork_event
machine__remove_thread
__machine__remove_thread
threads->last_match = NULL
thread__put
thread__put
Thread 1 and 2 might got stale last_match, before thread 3 clears
it. Thread 1 and 2 then race with thread 3's thread__put and they
might trigger the refcnt == 0 assertion above.
The patch is disabling the last_match cache for multiple thread
mode. It was originally meant for single thread scenarios, where
it's common to have multiple sequential searches of the same
thread.
In multithread mode this does not make sense, because top's threads
processes different /proc entries and so the 'struct threads' object
is queried for various threads. Moreover we'd need to add more locks
to make it work.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Lukasz Odzioba <lukasz.odzioba@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20180719143345.12963-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Separating threads::last_match cache set into separate
threads__set_last_match function. This will be useful in following
patch.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Lukasz Odzioba <lukasz.odzioba@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20180719143345.12963-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Separating threads::last_match cache read/check into separate
threads__get_last_match function. This will be useful in following
patch.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Lukasz Odzioba <lukasz.odzioba@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20180719143345.12963-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stephan reported, that pipe mode does not carry the group information
and thus the piped report won't display the grouped output for following
command:
# perf record -e '{cycles,instructions,branches}' -a sleep 4 | perf report
It has no idea about the group setup, so it will display events
separately:
# Overhead Command Shared Object ...
# ........ ............... .......................
#
6.71% swapper [kernel.kallsyms]
2.28% offlineimap libpython2.7.so.1.0
0.78% perf [kernel.kallsyms]
...
Fix GROUP_DESC feature record to be synthesized in pipe mode, so the
report output is grouped if there are groups defined in record:
# Overhead Command Shared ...
# ........................ ............... .......
#
7.57% 0.16% 0.30% swapper [kernel
1.87% 3.15% 2.46% offlineimap libpyth
1.33% 0.00% 0.00% perf [kernel
...
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Stephane Eranian <eranian@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180712135202.14774-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When perf/data is recorded with the dwarf call-graph option, the
callchain shown by 'perf script' still shows the binary offsets of the
userspace symbols instead of their virtual addresses. Since the symbol
offset calculation is based on using virtual address as the ip, we see
incorrect offsets as well.
The use of virtual addresses affects the ability to find out the
line number in the corresponding source file to which an address
maps to as described in commit 6754075915 ("perf unwind: Use
addr_location::addr instead of ip for entries").
This has also been addressed by temporarily converting the virtual
address to the correponding binary offset so that it can be mapped
to the source line number correctly.
This is a follow-up for commit 1961018469 ("perf script: Show
virtual addresses instead of offsets").
This can be verified on a powerpc64le system running Fedora 27 as
shown below:
# perf probe -x /usr/lib64/libc-2.26.so -a inet_pton
# perf record -e probe_libc:inet_pton --call-graph=dwarf ping -6 -c 1 ::1
Before:
# perf report --stdio --no-children -s sym,srcline -g address
# Samples: 1 of event 'probe_libc:inet_pton'
# Event count (approx.): 1
#
# Overhead Symbol Source:Line
# ........ .................... ...........
#
100.00% [.] __GI___inet_pton inet_pton.c
|
---gaih_inet getaddrinfo.c:537 (inlined)
__GI_getaddrinfo getaddrinfo.c:2304 (inlined)
main ping.c:519
generic_start_main libc-start.c:308 (inlined)
__libc_start_main libc-start.c:102
...
# perf script -F comm,ip,sym,symoff,srcline,dso
ping
15af28 __GI___inet_pton+0xffff000099160008 (/usr/lib64/libc-2.26.so)
libc-2.26.so[ffff80004ca0af28]
10fa53 gaih_inet+0xffff000099160f43
libc-2.26.so[ffff80004c9bfa53] (inlined)
1105b3 __GI_getaddrinfo+0xffff000099160163
libc-2.26.so[ffff80004c9c05b3] (inlined)
2d6f main+0xfffffffd9f1003df (/usr/bin/ping)
ping[fffffffecf882d6f]
2369f generic_start_main+0xffff00009916013f
libc-2.26.so[ffff80004c8d369f] (inlined)
23897 __libc_start_main+0xffff0000991600b7 (/usr/lib64/libc-2.26.so)
libc-2.26.so[ffff80004c8d3897]
After:
# perf report --stdio --no-children -s sym,srcline -g address
# Samples: 1 of event 'probe_libc:inet_pton'
# Event count (approx.): 1
#
# Overhead Symbol Source:Line
# ........ .................... ...........
#
100.00% [.] __GI___inet_pton inet_pton.c
|
---gaih_inet.constprop.7 getaddrinfo.c:537
getaddrinfo getaddrinfo.c:2304
main ping.c:519
generic_start_main.isra.0 libc-start.c:308
__libc_start_main libc-start.c:102
...
# perf script -F comm,ip,sym,symoff,srcline,dso
ping
7fffb38aaf28 __GI___inet_pton+0x8 (/usr/lib64/libc-2.26.so)
inet_pton.c:68
7fffb385fa53 gaih_inet.constprop.7+0xf43 (/usr/lib64/libc-2.26.so)
getaddrinfo.c:537
7fffb38605b3 getaddrinfo+0x163 (/usr/lib64/libc-2.26.so)
getaddrinfo.c:2304
130782d6f main+0x3df (/usr/bin/ping)
ping.c:519
7fffb377369f generic_start_main.isra.0+0x13f (/usr/lib64/libc-2.26.so)
libc-start.c:308
7fffb3773897 __libc_start_main+0xb7 (/usr/lib64/libc-2.26.so)
libc-start.c:102
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Fixes: 6754075915 ("perf unwind: Use addr_location::addr instead of ip for entries")
Link: http://lkml.kernel.org/r/20180703120555.32971-1-sandipan@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This should speed up accessing new system calls introduced with the
kernel rather than waiting for libaudit updates to include them.
It also enables users to specify wildcards, for example, perf trace -e
'open*', just like was already possible on x86, s390, and powerpc, which
means arm64 can now pass the "Check open filename arg using perf trace +
vfs_getname" test.
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20180706163454.f714b9ab49ecc8566a0b3565@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This should speed up accessing new system calls introduced with the
kernel rather than waiting for libaudit updates to include them.
Using the existing other arch scripts resulted in this error:
tools/perf/arch/arm64/entry/syscalls//mksyscalltbl: 25: printf: __NR3264_ftruncate: expected numeric value
because, unlike other arches, asm-generic's unistd.h does things like:
#define __NR_ftruncate __NR3264_ftruncate
Turning the scripts printf's %d into a %s resulted in this in the
generated syscalls.c file:
static const char *syscalltbl_arm64[] = {
[__NR3264_ftruncate] = "ftruncate",
So we use the host C compiler to fold the macros, and print them out
from within a temporary C program, in order to get the correct output:
static const char *syscalltbl_arm64[] = {
[46] = "ftruncate",
Committer notes:
Testing this with a container with an old toolchain breaks because it
ends up using the system's /usr/include/asm-generic/unistd.h, included
from tools/arch/arm64/include/uapi/asm/unistd.h when what is desired is
for it to include tools/include/uapi/asm-generic/unistd.h.
Since all that tools/arch/arm64/include/uapi/asm/unistd.h is to set a
define and then include asm-generic/unistd.h, do that directly and use
tools/include/uapi/asm-generic/unistd.h as the file to get the syscall
definitions to expand.
Testing it:
tools/perf/arch/arm64/entry/syscalls/mksyscalltbl /gcc-linaro-5.4.1-2017.05-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu-gcc gcc tools/include/uapi/asm-generic/unistd.h
Now works and generates in the syscall string table.
Before it ended up as:
$ tools/perf/arch/arm64/entry/syscalls/mksyscalltbl /gcc-linaro-5.4.1-2017.05-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu-gcc gcc tools/arch/arm64/include/uapi/asm/unistd.h
static const char *syscalltbl_arm64[] = {
<stdin>: In function 'main':
<stdin>:257:38: error: '__NR_getrandom' undeclared (first use in this function)
<stdin>:257:38: note: each undeclared identifier is reported only once for each function it appears in
<stdin>:258:41: error: '__NR_memfd_create' undeclared (first use in this function)
<stdin>:259:32: error: '__NR_bpf' undeclared (first use in this function)
<stdin>:260:37: error: '__NR_execveat' undeclared (first use in this function)
tools/perf/arch/arm64/entry/syscalls/mksyscalltbl: 47: tools/perf/arch/arm64/entry/syscalls/mksyscalltbl: /tmp/create-table-60liya: Permission denied
};
$
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20180706163443.22626f5e9e10e5bab5e5c662@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Will be used for generating the syscall id/string translation table.
The arm64 unistd.h file simply #includes the asm-generic/unistd.h, so,
since we will want to know whether either change, we grab both:
arch/arm64/include/uapi/asm/unistd.h
and
include/uapi/asm-generic/unistd.h
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20180706163434.1b64ffbcc0284fb79982f53b@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the event 'probe_libc:inet_pton' already exists, this test fails and
deletes the existing event before exiting. This will then pass for any
subsequent executions.
Instead of skipping to deleting the existing event because of failing to
add a new event, a duplicate event is now created and the script
continues with the usual checks. Only the new duplicate event that is
created at the beginning of the test is deleted as a part of the
cleanups in the end. All existing events remain as it is.
This can be observed on a powerpc64 system running Fedora 27 as shown
below.
# perf probe -x /usr/lib64/power8/libc-2.26.so -a inet_pton
Added new event:
probe_libc:inet_pton (on inet_pton in /usr/lib64/power8/libc-2.26.so)
Before:
# perf test -v "probe libc's inet_pton & backtrace it with ping"
62: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 21302
test child finished with -1
---- end ----
probe libc's inet_pton & backtrace it with ping: FAILED!
# perf probe --list
After:
# perf test -v "probe libc's inet_pton & backtrace it with ping"
62: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 21490
ping 21513 [035] 39357.565561: probe_libc:inet_pton_1: (7fffa4c623b0)
7fffa4c623b0 __GI___inet_pton+0x0 (/usr/lib64/power8/libc-2.26.so)
7fffa4c190dc gaih_inet.constprop.7+0xf4c (/usr/lib64/power8/libc-2.26.so)
7fffa4c19c4c getaddrinfo+0x15c (/usr/lib64/power8/libc-2.26.so)
111d93c20 main+0x3e0 (/usr/bin/ping)
test child finished with 0
---- end ----
probe libc's inet_pton & backtrace it with ping: Ok
# perf probe --list
probe_libc:inet_pton (on __inet_pton@resolv/inet_pton.c in /usr/lib64/power8/libc-2.26.so)
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/e11fecff96e6cf4c65cdbd9012463513d7b8356c.1530724939.git.sandipan@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If there is a mismatch in the perf script output, this test fails and
exits before the event and temporary files created during its execution
are cleaned up.
This can be observed on a powerpc64 system running Fedora 27 as shown
below.
# perf test -v "probe libc's inet_pton & backtrace it with ping"
62: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 18655
ping 18674 [013] 24511.496995: probe_libc:inet_pton: (7fffa6b423b0)
7fffa6b423b0 __GI___inet_pton+0x0 (/usr/lib64/power8/libc-2.26.so)
7fffa6af90dc gaih_inet.constprop.7+0xf4c (/usr/lib64/power8/libc-2.26.so)
FAIL: expected backtrace entry "getaddrinfo\+0x[[:xdigit:]]+[[:space:]]\(/usr/lib64/power8/libc-2.26.so\)$" got "7fffa6af90dc gaih_inet.constprop.7+0xf4c (/usr/lib64/power8/libc-2.26.so)"
test child finished with -1
---- end ----
probe libc's inet_pton & backtrace it with ping: FAILED!
# ls /tmp/expected.* /tmp/perf.data.* /tmp/perf.script.*
/tmp/expected.u31 /tmp/perf.data.Pki /tmp/perf.script.Bhs
# perf probe --list
probe_libc:inet_pton (on __inet_pton@resolv/inet_pton.c in /usr/lib64/power8/libc-2.26.so)
Cleanup of the event and the temporary files are now ensured by allowing
the cleanup code to be executed even if the lines from the backtrace do
not match their expected patterns instead of simply exiting from the
point of failure.
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/ce9fb091dd3028fba8749a1a267cfbcb264bbfb1.1530724939.git.sandipan@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For powerpc64, this test currently fails due to a mismatch in the
expected output.
This can be observed on a powerpc64le system running Fedora 27 as shown
below.
# perf test -v "probe libc's inet_pton & backtrace it with ping"
Before:
62: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 23948
ping 23965 [003] 71136.075084: probe_libc:inet_pton: (7fff996aaf28)
7fff996aaf28 __GI___inet_pton+0x8 (/usr/lib64/libc-2.26.so)
7fff9965fa54 gaih_inet.constprop.7+0xf44 (/usr/lib64/libc-2.26.so)
FAIL: expected backtrace entry 2 "getaddrinfo\+0x[[:xdigit:]]+[[:space:]]\(/usr/lib64/libc-2.26.so\)$" got "7fff9965fa54 gaih_inet.constprop.7+0xf44 (/usr/lib64/libc-2.26.so)"
test child finished with -1
---- end ----
probe libc's inet_pton & backtrace it with ping: FAILED!
After:
62: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 24638
ping 24655 [001] 71208.525396: probe_libc:inet_pton: (7fffa245af28)
7fffa245af28 __GI___inet_pton+0x8 (/usr/lib64/libc-2.26.so)
7fffa240fa54 gaih_inet.constprop.7+0xf44 (/usr/lib64/libc-2.26.so)
7fffa24105b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so)
138d52d70 main+0x3e0 (/usr/bin/ping)
test child finished with 0
---- end ----
probe libc's inet_pton & backtrace it with ping: Ok
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Maynard Johnson <maynard@us.ibm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Fixes: e07d585e2454 ("perf tests: Switch trace+probe_libc_inet_pton to use record")
Link: http://lkml.kernel.org/r/49621ec5f37109f0655e5a8c32287ad68d85a1e5.1530724939.git.sandipan@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For powerpc64, perf will filter out the second entry in the callchain,
i.e. the LR value, if the return address of the function corresponding
to the probed location has already been saved on its caller's stack.
The state of the return address is determined using debug information.
At any point within a function, if the return address is already saved
somewhere, a DWARF expression can tell us about its location. If the
return address in still in LR only, no DWARF expression would exist.
Typically, the instructions in a function's prologue first copy the LR
value to R0 and then pushes R0 on to the stack. If LR has already been
copied to R0 but R0 is yet to be pushed to the stack, we can still get a
DWARF expression that says that the return address is in R0. This is
indicating that getting a DWARF expression for the return address does
not guarantee the fact that it has already been saved on the stack.
This can be observed on a powerpc64le system running Fedora 27 as shown
below.
# objdump -d /usr/lib64/libc-2.26.so | less
...
000000000015af20 <inet_pton>:
15af20: 0b 00 4c 3c addis r2,r12,11
15af24: e0 c1 42 38 addi r2,r2,-15904
15af28: a6 02 08 7c mflr r0
15af2c: f0 ff c1 fb std r30,-16(r1)
15af30: f8 ff e1 fb std r31,-8(r1)
15af34: 78 1b 7f 7c mr r31,r3
15af38: 78 23 83 7c mr r3,r4
15af3c: 78 2b be 7c mr r30,r5
15af40: 10 00 01 f8 std r0,16(r1)
15af44: c1 ff 21 f8 stdu r1,-64(r1)
15af48: 28 00 81 f8 std r4,40(r1)
...
# readelf --debug-dump=frames-interp /usr/lib64/libc-2.26.so | less
...
00027024 0000000000000024 00027028 FDE cie=00000000 pc=000000000015af20..000000000015af88
LOC CFA r30 r31 ra
000000000015af20 r1+0 u u u
000000000015af34 r1+0 c-16 c-8 r0
000000000015af48 r1+64 c-16 c-8 c+16
000000000015af5c r1+0 c-16 c-8 c+16
000000000015af78 r1+0 u u
...
# perf probe -x /usr/lib64/libc-2.26.so -a inet_pton+0x18
# perf record -e probe_libc:inet_pton -g ping -6 -c 1 ::1
# perf script
Before:
ping 2829 [005] 512917.460174: probe_libc:inet_pton: (7fff7e2baf38)
7fff7e2baf38 __GI___inet_pton+0x18 (/usr/lib64/libc-2.26.so)
7fff7e2705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so)
12f152d70 _init+0xbfc (/usr/bin/ping)
7fff7e1836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so)
7fff7e183898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so)
0 [unknown] ([unknown])
After:
ping 2829 [005] 512917.460174: probe_libc:inet_pton: (7fff7e2baf38)
7fff7e2baf38 __GI___inet_pton+0x18 (/usr/lib64/libc-2.26.so)
7fff7e26fa54 gaih_inet.constprop.7+0xf44 (/usr/lib64/libc-2.26.so)
7fff7e2705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so)
12f152d70 _init+0xbfc (/usr/bin/ping)
7fff7e1836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so)
7fff7e183898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so)
0 [unknown] ([unknown])
Reported-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Maynard Johnson <maynard@us.ibm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/66e848a7bdf2d43b39210a705ff6d828a0865661.1530724939.git.sandipan@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add missing documentation for --desc and --debug options to the 'perf
list' man page.
Signed-off-by: Sangwon Hong <qpakzk@gmail.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20180717110738.10779-1-qpakzk@gmail.com
[ Clarify that --desc is by default active ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With commit eca0fa28cd ("perf record: Provide detailed information on
s390 CPU") s390 platform provides detailed type/model/capacity
information in the CPU identifier string instead of just "IBM/S390".
This breaks 'perf kvm' support which uses hard coded string IBM/S390 to
compare with the CPU identifier string. Fix this by changing the
comparison.
Reported-by: Stefan Raspl <raspl@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Tested-by: Stefan Raspl <raspl@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: stable@vger.kernel.org
Fixes: eca0fa28cd ("perf record: Provide detailed information on s390 CPU")
Link: http://lkml.kernel.org/r/20180712070936.67547-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'perf stat' command line flag -T to display transaction counters is
currently supported for x86 only.
Add support for s390. It is based on the metrics flag -M transaction
using the architecture dependent JSON files. This requires a metric
named "transaction" in the JSON files for the platform.
Introduce a new function metricgroup__has_metric() to check for the
existence of a metric_name transaction.
As suggested by Andi Kleen, this is the new approach to support
transactions counters. Other architectures will follow.
Output before:
[root@p23lp27 perf]# ./perf stat -T -- sleep 1
Cannot set up transaction events
[root@p23lp27 perf]#
Output after:
[root@s35lp76 perf]# ./perf stat -T -- ~/mytesttx 1 >/tmp/111
Performance counter stats for '/root/mytesttx 1':
1 tx_c_tend # 13.0 transaction
1 tx_nc_tend
11 tx_nc_tabort
0 tx_c_tabort_special
0 tx_c_tabort_no_special
0.001070109 seconds time elapsed
[root@s35lp76 perf]#
Suggested-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180626071701.58190-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Correct the support of detailed/verbose PMU event description by using
the "Unit": keyword in the json files to address event names refering to
the /sys/devices/cpum_[cs]f devices.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180621080452.61012-2-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This reverts commit 038586c343.
Fix the support of detailed/verbose PMU event description by using the
"Unit": keyword in the json files to address event names refering to the
/sys/devices/cpum_[cs]f devices.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180621080452.61012-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the instruction sample failure has happened, it isn't necessary to
execute to the end of the function cs_etm__flush(). This commit is to
bail out immediately and return the error code.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1529298599-3876-3-git-send-email-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch introduces invalid address macro and uses it to replace dummy
value '0xdeadbeefdeadbeefUL'.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1529298599-3876-2-git-send-email-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull s390 fix from Martin Schwidefsky.
Guenter Roeck reports that the s390 allmodconfig build fails because of
a gcc plugin problem. The fix won't be in-tree until 4.19, so for now
disable the gcc plugins on s390.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: disable gcc plugins
Including asm/cacheflush.h first results in the following build error
when trying to build sparc32:allmodconfig, because 'struct page' has not
been declared, and the function declaration ends up creating a separate
(private) declaration of struct page (as a result of function arguments
being in the scope of the function declaration and definition, not in
global scope).
The C scoping rules do not just affect variable visibility, they also
affect type declaration visibility.
The end result is that when the actual call site is seen in
<linux/highmem.h>, the 'struct page' type in the caller is not the same
'struct page' that the function was declared with, resulting in:
In file included from arch/sparc/include/asm/page.h:10:0,
...
from drivers/staging/media/omap4iss/iss_video.c:15:
include/linux/highmem.h: In function 'clear_user_highpage':
include/linux/highmem.h:137:31: error:
passing argument 1 of 'sparc_flush_page_to_ram' from incompatible
pointer type
Include generic includes files first to fix the problem.
Fixes: fc96d58c10 ("[media] v4l: omap4iss: Add support for OMAP4 camera interface - Video devices")
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
[ Added explanation of C scope rules - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We want to allow having mixed events with/without callchains, not
using a global flag to show callchains, but allowing supressing
callchains when they are present.
So invert the logic of the last parameter to hists__fprint() to
that effect.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-ohqyisr6qge79qa95ojslptx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Make sure we don't go over the maximum jump stack boundary,
from Taehee Yoo.
2) Missing rcu_barrier() in hash and rbtree sets, also from Taehee.
3) Missing check to nul-node in rbtree timeout routine, from Taehee.
4) Use dev->name from flowtable to fix a memleak, from Florian.
5) Oneliner to free flowtable object on removal, from Florian.
6) Memleak in chain rename transaction, again from Florian.
7) Don't allow two chains to use the same name in the same
transaction, from Florian.
8) handle DCCP SYNC/SYNCACK as invalid, this triggers an
uninitialized timer in conntrack reported by syzbot, from Florian.
9) Fix leak in case netlink_dump_start() fails, from Florian.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
* always keep regulatory user hint
* add missing break statement in station flags parsing
* fix non-linear SKBs in port-control-over-nl80211
* reconfigure VLAN stations during HW restart
-----BEGIN PGP SIGNATURE-----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=qtIc
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-davem-2018-07-24' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Only a few fixes:
* always keep regulatory user hint
* add missing break statement in station flags parsing
* fix non-linear SKBs in port-control-over-nl80211
* reconfigure VLAN stations during HW restart
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Naveen has been contributing consistently reviewing and hardening
kprobes for some time now. I have not been able to do the same due
to other commitments.
Signed-off-by: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: akpm@linux-foundation.org
Cc: mhiramat@kernel.org
Link: http://lkml.kernel.org/r/153180735790.1914.15547706781664285286.stgit@thinktux
Signed-off-by: Ingo Molnar <mingo@kernel.org>
I2C is open drain, so request the GPIO accordingly, even if pinmux did
set it up correctly for in-kernel users in this case.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
On Gen3, we can only do RXDMA once per transfer reliably. For that, we
must reset the device, then we can have RXDMA once. This patch
implements this. When there is no reset controller or the reset fails,
RXDMA will be blocked completely. Otherwise, it will be disabled after
the first RXDMA transfer. Based on a commit from the BSP by Hiromitsu
Yamasaki, yet completely refactored to handle multiple read messages
within one transfer.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
The revised if_ready checks skipped over the case of returning error when
the controller is being deleted. Instead it was returning BUSY, which
caused the ios to retry, which caused the ns delete to hang waiting for
the ios to drain.
Stack trace of hang looks like:
kworker/u64:2 D 0 74 2 0x80000000
Workqueue: nvme-delete-wq nvme_delete_ctrl_work [nvme_core]
Call Trace:
? __schedule+0x26d/0x820
schedule+0x32/0x80
blk_mq_freeze_queue_wait+0x36/0x80
? remove_wait_queue+0x60/0x60
blk_cleanup_queue+0x72/0x160
nvme_ns_remove+0x106/0x140 [nvme_core]
nvme_remove_namespaces+0x7e/0xa0 [nvme_core]
nvme_delete_ctrl_work+0x4d/0x80 [nvme_core]
process_one_work+0x160/0x350
worker_thread+0x1c3/0x3d0
kthread+0xf5/0x130
? process_one_work+0x350/0x350
? kthread_bind+0x10/0x10
ret_from_fork+0x1f/0x30
Extend nvmf_fail_nonready_command() to supply the controller pointer so
that the controller state can be looked at. Fail any io to a controller
that is deleting.
Fixes: 3bc32bb118 ("nvme-fabrics: refactor queue ready check")
Fixes: 35897b920c ("nvme-fabrics: fix and refine state checks in __nvmf_check_ready")
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
The existing code to carve up the sg list expected an sg element-per-page
which can be very incorrect with iommu's remapping multiple memory pages
to fewer bus addresses. To hit this error required a large io payload
(greater than 256k) and a system that maps on a per-page basis. It's
possible that large ios could get by fine if the system condensed the
sgl list into the first 64 elements.
This patch corrects the sg list handling by specifically walking the
sg list element by element and attempting to divide the transfer up
on a per-sg element boundary. While doing so, it still tries to keep
sequences under 256k, but will exceed that rule if a single sg element
is larger than 256k.
Fixes: 48fa362b6c ("nvmet-fc: simplify sg list handling")
Cc: <stable@vger.kernel.org> # 4.14
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Make sure of_device_id tables are NULL terminated.
Found by coccinelle spatch "misc/of_table.cocci"
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Ilia Lin <ilia.lin@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
error_entry and error_exit communicate the user vs. kernel status of
the frame using %ebx. This is unnecessary -- the information is in
regs->cs. Just use regs->cs.
This makes error_entry simpler and makes error_exit more robust.
It also fixes a nasty bug. Before all the Spectre nonsense, the
xen_failsafe_callback entry point returned like this:
ALLOC_PT_GPREGS_ON_STACK
SAVE_C_REGS
SAVE_EXTRA_REGS
ENCODE_FRAME_POINTER
jmp error_exit
And it did not go through error_entry. This was bogus: RBX
contained garbage, and error_exit expected a flag in RBX.
Fortunately, it generally contained *nonzero* garbage, so the
correct code path was used. As part of the Spectre fixes, code was
added to clear RBX to mitigate certain speculation attacks. Now,
depending on kernel configuration, RBX got zeroed and, when running
some Wine workloads, the kernel crashes. This was introduced by:
commit 3ac6d8c787 ("x86/entry/64: Clear registers for exceptions/interrupts, to reduce speculation attack surface")
With this patch applied, RBX is no longer needed as a flag, and the
problem goes away.
I suspect that malicious userspace could use this bug to crash the
kernel even without the offending patch applied, though.
[ Historical note: I wrote this patch as a cleanup before I was aware
of the bug it fixed. ]
[ Note to stable maintainers: this should probably get applied to all
kernels. If you're nervous about that, a more conservative fix to
add xorl %ebx,%ebx; incl %ebx before the jump to error_exit should
also fix the problem. ]
Reported-and-tested-by: M. Vefa Bicakci <m.v.b@runbox.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Cc: xen-devel@lists.xenproject.org
Fixes: 3ac6d8c787 ("x86/entry/64: Clear registers for exceptions/interrupts, to reduce speculation attack surface")
Link: http://lkml.kernel.org/r/b5010a090d3586b2d6e06c7ad3ec5542d1241c45.1532282627.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
All SKX with stepping higher than 4 support the TSC_DEADLINE,
no matter the microcode version.
Without this patch, upcoming SKX steppings will not be able to use
their TSC_DEADLINE timer.
Signed-off-by: Len Brown <len.brown@intel.com>
Cc: <stable@kernel.org> # v4.14+
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 616dd5872e ("x86/apic: Update TSC_DEADLINE quirk with additional SKX stepping")
Link: http://lkml.kernel.org/r/d0c7129e509660be9ec6b233284b8d42d90659e8.1532207856.git.len.brown@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently user regulatory hint is ignored if all wiphys
in the system are self managed. But the hint is not ignored
if there is no wiphy in the system. This affects the global
regulatory setting. Global regulatory setting needs to be
maintained so that it can be applied to a new wiphy entering
the system. Therefore, do not ignore user regulatory setting
even if all wiphys in the system are self managed.
Signed-off-by: Amar Singhal <asinghal@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The s390 build currently fails with the latent entropy plugin:
arch/s390/kernel/als.o: In function `verify_facilities':
als.c:(.init.text+0x24): undefined reference to `latent_entropy'
als.c:(.init.text+0xae): undefined reference to `latent_entropy'
make[3]: *** [arch/s390/boot/compressed/vmlinux] Error 1
make[2]: *** [arch/s390/boot/compressed/vmlinux] Error 2
make[1]: *** [bzImage] Error 2
This will be fixed with the early boot rework from Vasily, which
is planned for the 4.19 merge window.
For 4.18 the simplest solution is to disable the gcc plugins and
reenable them after the early boot rework is upstream.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Current sg coalescing logic in sk_alloc_sg() (latter is used by tls and
sockmap) is not quite correct in that we do fetch the previous sg entry,
however the subsequent check whether the refilled page frag from the
socket is still the same as from the last entry with prior offset and
length matching the start of the current buffer is comparing always the
first sg list entry instead of the prior one.
Fixes: 3c4d755915 ("tls: kernel TLS support")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shaochun Chen points out we leak dumper filter state allocations
stored in dump_control->data in case there is an error before netlink sets
cb_running (after which ->done will be called at some point).
In order to fix this, add .start functions and do the allocations
there.
->done is going to clean up, and in case error occurs before
->start invocation no cleanups need to be done anymore.
Reported-by: shaochun chen <cscnull@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
If a GPIO chip is a part of a hierarchy IRQ domain, there is no
way to specify the trigger type when gpio(d)_to_irq() allocates an
interrupt on-the-fly.
Currently, uniphier_gpio_to_irq() sets IRQ_TYPE_NONE, but it causes
an error in the .alloc() hook of the parent domain.
(drivers/irq/irq-uniphier-aidet.c)
Even if we change irq-uniphier-aidet.c to accept the NONE type,
GIC complains about it since commit 83a86fbb5b ("irqchip/gic:
Loudly complain about the use of IRQ_TYPE_NONE").
Instead, use IRQ_TYPE_LEVEL_HIGH as a temporary value when an irq
is allocated. irq_set_irq_type() will override it when the irq is
really requested.
Fixes: dbe776c2ca ("gpio: uniphier: add UniPhier GPIO controller driver")
Reported-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This fixes up the handling of fixed regulator polarity
inversion flags: while I remembered to fix it for the
undocumented "reg-fixed-voltage" I forgot about the
official "regulator-fixed" binding, there are two ways
to do a fixed regulator.
The error was noticed and fixed.
Fixes: a603a2b8d8 ("gpio: of: Add special quirk to parse regulator flags")
Cc: Mark Brown <broonie@kernel.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Reported-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Eric Dumazet says:
====================
Juha-Matti Tilli reported that malicious peers could inject tiny
packets in out_of_order_queue, forcing very expensive calls
to tcp_collapse_ofo_queue() and tcp_prune_ofo_queue() for
every incoming packet.
With tcp_rmem[2] default of 6MB, the ooo queue could
contain ~7000 nodes.
This patch series makes sure we cut cpu cycles enough to
render the attack not critical.
We might in the future go further, like disconnecting
or black-holing proven malicious flows.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In case skb in out_or_order_queue is the result of
multiple skbs coalescing, we would like to get a proper gso_segs
counter tracking, so that future tcp_drop() can report an accurate
number.
I chose to not implement this tracking for skbs in receive queue,
since they are not dropped, unless socket is disconnected.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to be able to give better diagnostics and detect
malicious traffic, we need to have better sk->sk_drops tracking.
Fixes: 9f5afeae51 ("tcp: use an RB tree for ooo receive queue")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Richter