When a system call is not detected, the reason is either because the
system call ID is out of scope or failure to find the corresponding path
in the sysfs, trace__read_syscall_info() returns zero. Finally, without
returning an error value it introduces confusion for the caller.
This patch lets the function trace__read_syscall_info() to return
-EEXIST when a system call doesn't exist.
Fixes: b8b1033fca ("perf trace: Mark syscall ids that are not allocated to avoid unnecessary error messages")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: bpf@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221121075237.127706-3-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch defines a macro RAW_SYSCALL_ARGS_NUM to replace the open
coded number '6'.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20221121075237.127706-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove unnecessary include of internal threadmap.h and refcount.h in
thread_map.h. Switch to using public APIs when possible or including
the internal header file in the C file. Fix a transitive dependency in
openat-syscall.c broken by the clean up.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221109184914.1357295-13-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use sig_atomic_t for variables written/accessed in signal
handlers. This is undefined behavior as per:
https://wiki.sei.cmu.edu/confluence/display/c/SIG31-C.+Do+not+access+shared+objects+in+signal+handlers
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20221024181913.630986-9-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When parsing flags in filter, the strtoul function uses wrong parsing
condition (tok[1] = 'x'), which can make the flags be corrupted and
treat all numbers start with 0 as hex.
In fact strtoul() will auto test hex format when base == 0 (See
_parse_integer_fixup_radix). So there is no need to test this again.
Remove the unnessesary is_hexa test.
Fixes: 154c978d48 ("libbeauty: Introduce strarray__strtoul_flags()")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220926031440.28275-3-chenzhongjin@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
trace__fprintf_tp_fields() will always print arg names because when
implemented it is forced to print arg_names with:
(1 || trace->show_arg_names)
So the printing looks like:
> cat ~/.perfconfig
[trace]
show_arg_names = no
> perf trace -e syscalls:*mmap sleep 1
0.000 sleep/1119 syscalls:sys_enter_mmap(NULL, 8192, READ|WRITE, PRIVATE|ANONYMOUS)
0.179 sleep/1119 syscalls:sys_exit_mmap(__syscall_nr: 9, ret: 140535426170880)
...
Although the comment said that perhaps we need a show_tp_arg_names.
I don't think it's necessary to control them separately because it's not
so clean that part of the log shows arg names but other not.
Also when we are tracing functions it's rare to especially distinguish
syscalls and tp trace.
Only use one option to control arg names printing is more resonable and
simple. So remove the force condition and commit.
After fix:
> perf trace -e syscalls:*mmap sleep 1
0.000 sleep/1121 syscalls:sys_enter_mmap(NULL, 8192, READ|WRITE, PRIVATE|ANONYMOUS)
0.163 sleep/1121 syscalls:sys_exit_mmap(9, 140454467661824)
...
Fixes: f11b2803bb ("perf trace: Allow choosing how to augment the tracepoint arguments")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220926031440.28275-2-chenzhongjin@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As most members of syscall_stats is set to 0 in thread__update_stats,
using zalloc() directly.
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220908021141.27134-2-shangxiaojing@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Delete repeated word "and" in comments.
Signed-off-by: shaomin Deng <dengshaomin@cdjrlc.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220807084629.23121-1-dengshaomin@cdjrlc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move print_*_events functions out of parse-events.c into a new
print-events.c. Move tracepoint code into tracepoint.c or
trace-event-info.c (sole user). This reduces the dependencies of
parse-events.c and makes it more amenable to being a library in the
future.
Remove some unnecessary definitions from parse-events.h. Fix a
checkpatch.pl warning on using unsigned rather than unsigned int. Fix
some line length warnings too.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20220729204217.250166-3-irogers@google.com
[ Add include linux/stddef.h before perf_events.h for systems where __always_inline isn't pulled in before used, such as older Alpine Linux ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On powerpc, 'perf trace' is crashing with a SIGSEGV when trying to
process a perf.data file created with 'perf trace record -p':
#0 0x00000001225b8988 in syscall_arg__scnprintf_augmented_string <snip> at builtin-trace.c:1492
#1 syscall_arg__scnprintf_filename <snip> at builtin-trace.c:1492
#2 syscall_arg__scnprintf_filename <snip> at builtin-trace.c:1486
#3 0x00000001225bdd9c in syscall_arg_fmt__scnprintf_val <snip> at builtin-trace.c:1973
#4 syscall__scnprintf_args <snip> at builtin-trace.c:2041
#5 0x00000001225bff04 in trace__sys_enter <snip> at builtin-trace.c:2319
That points to the below code in tools/perf/builtin-trace.c:
/*
* If this is raw_syscalls.sys_enter, then it always comes with the 6 possible
* arguments, even if the syscall being handled, say "openat", uses only 4 arguments
* this breaks syscall__augmented_args() check for augmented args, as we calculate
* syscall->args_size using each syscalls:sys_enter_NAME tracefs format file,
* so when handling, say the openat syscall, we end up getting 6 args for the
* raw_syscalls:sys_enter event, when we expected just 4, we end up mistakenly
* thinking that the extra 2 u64 args are the augmented filename, so just check
* here and avoid using augmented syscalls when the evsel is the raw_syscalls one.
*/
if (evsel != trace->syscalls.events.sys_enter)
augmented_args = syscall__augmented_args(sc, sample, &augmented_args_size, trace->raw_augmented_syscalls_args_size);
As the comment points out, we should not be trying to augment the args
for raw_syscalls. However, when processing a perf.data file, we are not
initializing those properly. Fix the same.
Reported-by: Claudio Carvalho <cclaudio@linux.ibm.com>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20220707090900.572584-1-naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The function trace__symbols_init() runs "perf-read-vdso32" and that ends up
with a SIGCHLD delivered to 'perf'. And this SIGCHLD make perf exit early.
'perf trace' should exit only if the SIGCHLD is from our workload process.
So let's use sigaction() instead of signal() to match such condition.
Committer notes:
Use memset to zero the 'struct sigaction' variable as the '= { 0 }'
method isn't accepted in many compiler versions, e.g.:
4 34.02 alpine:3.6 : FAIL clang version 4.0.0 (tags/RELEASE_400/final)
builtin-trace.c:4897:35: error: suggest braces around initialization of subobject [-Werror,-Wmissing-braces]
struct sigaction sigchld_act = { 0 };
^
{}
builtin-trace.c:4897:37: error: missing field 'sa_mask' initializer [-Werror,-Wmissing-field-initializers]
struct sigaction sigchld_act = { 0 };
^
2 errors generated.
6 32.60 alpine:3.8 : FAIL gcc version 6.4.0 (Alpine 6.4.0)
builtin-trace.c:4897:35: error: suggest braces around initialization of subobject [-Werror,-Wmissing-braces]
struct sigaction sigchld_act = { 0 };
^
{}
builtin-trace.c:4897:37: error: missing field 'sa_mask' initializer [-Werror,-Wmissing-field-initializers]
struct sigaction sigchld_act = { 0 };
^
2 errors generated.
7 34.82 alpine:3.9 : FAIL gcc version 8.3.0 (Alpine 8.3.0)
builtin-trace.c:4897:35: error: suggest braces around initialization of subobject [-Werror,-Wmissing-braces]
struct sigaction sigchld_act = { 0 };
^
{}
builtin-trace.c:4897:37: error: missing field 'sa_mask' initializer [-Werror,-Wmissing-field-initializers]
struct sigaction sigchld_act = { 0 };
^
2 errors generated.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220208140725.3947-1-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
New features:
- Add 'trace' subcommand for 'perf ftrace', setting the stage for more
'perf ftrace' subcommands. Not using a subcommand yields the previous
behaviour of 'perf ftrace'.
- Add 'latency' subcommand to 'perf ftrace', that can use the function
graph tracer or a BPF optimized one, via the -b/--use-bpf option.
E.g.:
$ sudo perf ftrace latency -a -T mutex_lock sleep 1
# DURATION | COUNT | GRAPH |
0 - 1 us | 4596 | ######################## |
1 - 2 us | 1680 | ######### |
2 - 4 us | 1106 | ##### |
4 - 8 us | 546 | ## |
8 - 16 us | 562 | ### |
16 - 32 us | 1 | |
32 - 64 us | 0 | |
64 - 128 us | 0 | |
128 - 256 us | 0 | |
256 - 512 us | 0 | |
512 - 1024 us | 0 | |
1 - 2 ms | 0 | |
2 - 4 ms | 0 | |
4 - 8 ms | 0 | |
8 - 16 ms | 0 | |
16 - 32 ms | 0 | |
32 - 64 ms | 0 | |
64 - 128 ms | 0 | |
128 - 256 ms | 0 | |
256 - 512 ms | 0 | |
512 - 1024 ms | 0 | |
1 - ... s | 0 | |
The original implementation of this command was in the bcc tool.
- Support --cputype option for hybrid events in 'perf stat'.
Improvements:
- Call chain improvements for ARM64.
- No need to do any affinity setup when profiling pids.
- Reduce multiplexing with duration_time in 'perf stat' metrics.
- Improve error message for uncore events, stating that some event groups are
can only be used in system wide (-a) mode.
- perf stat metric group leader fixes/improvements, including arch specific
changes to better support Intel topdown events.
- Probe non-deprecated sysfs path 1st, i.e. try /sys/devices/system/cpu/cpuN/topology/thread_siblings
first, then the old /sys/devices/system/cpu/cpuN/topology/core_cpus.
- Disable debuginfod by default in 'perf record', to avoid stalls on distros
such as Fedora 35.
- Use unbuffered output in 'perf bench' when pipe/tee'ing to a file.
- Enable ignore_missing_thread in 'perf trace'
Fixes:
- Avoid TUI crash when navigating in the annotation of recursive functions.
- Fix hex dump character output in 'perf script'.
- Fix JSON indentation to 4 spaces standard in the ARM vendor event files.
- Fix use after free in metric__new().
- Fix IS_ERR_OR_NULL() usage in the perf BPF loader.
- Fix up cross-arch register support, i.e. when printing register names take
into account the architecture where the perf.data file was collected.
- Fix SMT fallback with large core counts.
- Don't lower case MetricExpr when parsing JSON files so as not to lose info
such as the ":G" event modifier in metrics.
perf test:
- Add basic stress test for sigtrap handling to 'perf test'.
- Fix 'perf test' failures on s/390
- Enable system wide for metricgroups test in 'perf test´.
- Use 3 digits for test numbering now we can have more tests.
Arch specific:
- Add events for Arm Neoverse N2 in the ARM JSON vendor event files
- Support PERF_MEM_LVLNUM encodings in powerpc, that came from a single
patch series, where I incorrectly merged the kernel bits, that were then
reverted after coordination with Michael Ellerman and Stephen Rothwell.
- Add ARM SPE total latency as PERF_SAMPLE_WEIGHT.
- Update AMD documentation, with info on raw event encoding.
- Add support for global and local variants of the "p_stage_cyc" sort key,
applicable to perf.data files collected on powerpc.
- Remove duplicate and incorrect aux size checks in the ARM CoreSight ETM code.
Refactorings:
- Add a perf_cpu abstraction to disambiguate CPUs and CPU map indexes, fixing
problems along the way.
- Document CPU map methods.
UAPI sync:
- Update arch/x86/lib/mem{cpy,set}_64.S copies used in 'perf bench mem memcpy'
- Sync UAPI files with the kernel sources: drm, msr-index, cpufeatures.
Build system
- Enable warnings through HOSTCFLAGS.
- Drop requirement for libstdc++.so for libopencsd check
libperf:
- Make libperf adopt perf_counts_values__scale() from tools/perf/util/.
- Add a stat multiplexing test to libperf.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYeQj6AAKCRCyPKLppCJ+
JwyWAQCBmU8OJxhSJQnNCwTB9zNkPPBbihvIztepOJ7zsw7JcQD+KfAidHGQvI/Y
EmXIYkmdNkWPYJafONllnKK5cckjxgI=
=aj9V
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v5.17-2022-01-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tool updates from Arnaldo Carvalho de Melo:
"New features:
- Add 'trace' subcommand for 'perf ftrace', setting the stage for
more 'perf ftrace' subcommands. Not using a subcommand yields the
previous behaviour of 'perf ftrace'.
- Add 'latency' subcommand to 'perf ftrace', that can use the
function graph tracer or a BPF optimized one, via the -b/--use-bpf
option.
E.g.:
$ sudo perf ftrace latency -a -T mutex_lock sleep 1
# DURATION | COUNT | GRAPH |
0 - 1 us | 4596 | ######################## |
1 - 2 us | 1680 | ######### |
2 - 4 us | 1106 | ##### |
4 - 8 us | 546 | ## |
8 - 16 us | 562 | ### |
16 - 32 us | 1 | |
32 - 64 us | 0 | |
64 - 128 us | 0 | |
128 - 256 us | 0 | |
256 - 512 us | 0 | |
512 - 1024 us | 0 | |
1 - 2 ms | 0 | |
2 - 4 ms | 0 | |
4 - 8 ms | 0 | |
8 - 16 ms | 0 | |
16 - 32 ms | 0 | |
32 - 64 ms | 0 | |
64 - 128 ms | 0 | |
128 - 256 ms | 0 | |
256 - 512 ms | 0 | |
512 - 1024 ms | 0 | |
1 - ... s | 0 | |
The original implementation of this command was in the bcc tool.
- Support --cputype option for hybrid events in 'perf stat'.
Improvements:
- Call chain improvements for ARM64.
- No need to do any affinity setup when profiling pids.
- Reduce multiplexing with duration_time in 'perf stat' metrics.
- Improve error message for uncore events, stating that some event
groups are can only be used in system wide (-a) mode.
- perf stat metric group leader fixes/improvements, including arch
specific changes to better support Intel topdown events.
- Probe non-deprecated sysfs path first, i.e. try the path
/sys/devices/system/cpu/cpuN/topology/thread_siblings first, then
the old /sys/devices/system/cpu/cpuN/topology/core_cpus.
- Disable debuginfod by default in 'perf record', to avoid stalls on
distros such as Fedora 35.
- Use unbuffered output in 'perf bench' when pipe/tee'ing to a file.
- Enable ignore_missing_thread in 'perf trace'
Fixes:
- Avoid TUI crash when navigating in the annotation of recursive
functions.
- Fix hex dump character output in 'perf script'.
- Fix JSON indentation to 4 spaces standard in the ARM vendor event
files.
- Fix use after free in metric__new().
- Fix IS_ERR_OR_NULL() usage in the perf BPF loader.
- Fix up cross-arch register support, i.e. when printing register
names take into account the architecture where the perf.data file
was collected.
- Fix SMT fallback with large core counts.
- Don't lower case MetricExpr when parsing JSON files so as not to
lose info such as the ":G" event modifier in metrics.
perf test:
- Add basic stress test for sigtrap handling to 'perf test'.
- Fix 'perf test' failures on s/390
- Enable system wide for metricgroups test in 'perf test´.
- Use 3 digits for test numbering now we can have more tests.
Arch specific:
- Add events for Arm Neoverse N2 in the ARM JSON vendor event files
- Support PERF_MEM_LVLNUM encodings in powerpc, that came from a
single patch series, where I incorrectly merged the kernel bits,
that were then reverted after coordination with Michael Ellerman
and Stephen Rothwell.
- Add ARM SPE total latency as PERF_SAMPLE_WEIGHT.
- Update AMD documentation, with info on raw event encoding.
- Add support for global and local variants of the "p_stage_cyc" sort
key, applicable to perf.data files collected on powerpc.
- Remove duplicate and incorrect aux size checks in the ARM CoreSight
ETM code.
Refactorings:
- Add a perf_cpu abstraction to disambiguate CPUs and CPU map
indexes, fixing problems along the way.
- Document CPU map methods.
UAPI sync:
- Update arch/x86/lib/mem{cpy,set}_64.S copies used in 'perf bench
mem memcpy'
- Sync UAPI files with the kernel sources: drm, msr-index,
cpufeatures.
Build system
- Enable warnings through HOSTCFLAGS.
- Drop requirement for libstdc++.so for libopencsd check
libperf:
- Make libperf adopt perf_counts_values__scale() from tools/perf/util/.
- Add a stat multiplexing test to libperf"
* tag 'perf-tools-for-v5.17-2022-01-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (115 commits)
perf record: Disable debuginfod by default
perf evlist: No need to do any affinity setup when profiling pids
perf cpumap: Add is_dummy() method
perf metric: Fix metric_leader
perf cputopo: Fix CPU topology reading on s/390
perf metricgroup: Fix use after free in metric__new()
libperf tests: Update a use of the new cpumap API
perf arm: Fix off-by-one directory path
tools arch x86: Sync the msr-index.h copy with the kernel sources
tools headers cpufeatures: Sync with the kernel sources
tools headers UAPI: Update tools's copy of drm.h header
tools arch: Update arch/x86/lib/mem{cpy,set}_64.S copies used in 'perf bench mem memcpy'
perf pmu-events: Don't lower case MetricExpr
perf expr: Add debug logging for literals
perf tools: Probe non-deprecated sysfs path 1st
perf tools: Fix SMT fallback with large core counts
perf cpumap: Give CPUs their own type
perf stat: Correct first_shadow_cpu to return index
perf script: Fix flipped index and cpu
perf c2c: Use more intention revealing iterator
...
New:
- The Real Time Linux Analysis (RTLA) tool is added to the tools directory.
- Can safely filter on user space pointers with: field.ustring ~ "match-string"
- eprobes can now be filtered like any other event.
- trace_marker(_raw) now uses stream_open() to allow multiple threads to safely
write to it. Note, this could possibly break existing user space, but we will
not know until we hear about it, and then can revert the change if need be.
- New field in events to display when bottom halfs are disabled.
- Sorting of the ftrace functions are now done at compile time instead of
at bootup.
Infrastructure changes to support future efforts:
- Added __rel_loc type for trace events. Similar to __data_loc but the offset
to the dynamic data is based off of the location of the descriptor and not
the beginning of the event. Needed for user defined events.
- Some simplification of event trigger code.
- Make synthetic events process its callback better to not hinder other
event callbacks that are registered. Needed for user defined events.
And other small fixes and clean ups.
-
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYeGvcxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qrZtAP9ICjJxX54MTErElhhUL/NFLV7wqhJi
OIAgmp6jGVRqPAD+JxQtBnGH+3XMd71ioQkTfQ1rp+jBz2ERBj2DmELUAg0=
=zmda
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"New:
- The Real Time Linux Analysis (RTLA) tool is added to the tools
directory.
- Can safely filter on user space pointers with: field.ustring ~
"match-string"
- eprobes can now be filtered like any other event.
- trace_marker(_raw) now uses stream_open() to allow multiple threads
to safely write to it. Note, this could possibly break existing
user space, but we will not know until we hear about it, and then
can revert the change if need be.
- New field in events to display when bottom halfs are disabled.
- Sorting of the ftrace functions are now done at compile time
instead of at bootup.
Infrastructure changes to support future efforts:
- Added __rel_loc type for trace events. Similar to __data_loc but
the offset to the dynamic data is based off of the location of the
descriptor and not the beginning of the event. Needed for user
defined events.
- Some simplification of event trigger code.
- Make synthetic events process its callback better to not hinder
other event callbacks that are registered. Needed for user defined
events.
And other small fixes and cleanups"
* tag 'trace-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (50 commits)
tracing: Add ustring operation to filtering string pointers
rtla: Add rtla timerlat hist documentation
rtla: Add rtla timerlat top documentation
rtla: Add rtla timerlat documentation
rtla: Add rtla osnoise hist documentation
rtla: Add rtla osnoise top documentation
rtla: Add rtla osnoise man page
rtla: Add Documentation
rtla/timerlat: Add timerlat hist mode
rtla: Add timerlat tool and timelart top mode
rtla/osnoise: Add the hist mode
rtla/osnoise: Add osnoise top mode
rtla: Add osnoise tool
rtla: Helper functions for rtla
rtla: Real-Time Linux Analysis tool
tracing/osnoise: Properly unhook events if start_per_cpu_kthreads() fails
tracing: Remove duplicate warnings when calling trace_create_file()
tracing/kprobes: 'nmissed' not showed correctly for kretprobe
tracing: Add test for user space strings when filtering on string pointers
tracing: Have syscall trace events use trace_event_buffer_lock_reserve()
...
To pick up fixes and get in line with other trees, powerpc kernel
mostly this time, but BPF as well.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Core
----
- Defer freeing TCP skbs to the BH handler, whenever possible,
or at least perform the freeing outside of the socket lock section
to decrease cross-CPU allocator work and improve latency.
- Add netdevice refcount tracking to locate sources of netdevice
and net namespace refcount leaks.
- Make Tx watchdog less intrusive - avoid pausing Tx and restarting
all queues from a single CPU removing latency spikes.
- Various small optimizations throughout the stack from Eric Dumazet.
- Make netdev->dev_addr[] constant, force modifications to go via
appropriate helpers to allow us to keep addresses in ordered data
structures.
- Replace unix_table_lock with per-hash locks, improving performance
of bind() calls.
- Extend skb drop tracepoint with a drop reason.
- Allow SO_MARK and SO_PRIORITY setsockopt under CAP_NET_RAW.
BPF
---
- New helpers:
- bpf_find_vma(), find and inspect VMAs for profiling use cases
- bpf_loop(), runtime-bounded loop helper trading some execution
time for much faster (if at all converging) verification
- bpf_strncmp(), improve performance, avoid compiler flakiness
- bpf_get_func_arg(), bpf_get_func_ret(), bpf_get_func_arg_cnt()
for tracing programs, all inlined by the verifier
- Support BPF relocations (CO-RE) in the kernel loader.
- Further the support for BTF_TYPE_TAG annotations.
- Allow access to local storage in sleepable helpers.
- Convert verifier argument types to a composable form with different
attributes which can be shared across types (ro, maybe-null).
- Prepare libbpf for upcoming v1.0 release by cleaning up APIs,
creating new, extensible ones where missing and deprecating those
to be removed.
Protocols
---------
- WiFi (mac80211/cfg80211):
- notify user space about long "come back in N" AP responses,
allow it to react to such temporary rejections
- allow non-standard VHT MCS 10/11 rates
- use coarse time in airtime fairness code to save CPU cycles
- Bluetooth:
- rework of HCI command execution serialization to use a common
queue and work struct, and improve handling errors reported
in the middle of a batch of commands
- rework HCI event handling to use skb_pull_data, avoiding packet
parsing pitfalls
- support AOSP Bluetooth Quality Report
- SMC:
- support net namespaces, following the RDMA model
- improve connection establishment latency by pre-clearing buffers
- introduce TCP ULP for automatic redirection to SMC
- Multi-Path TCP:
- support ioctls: SIOCINQ, OUTQ, and OUTQNSD
- support socket options: IP_TOS, IP_FREEBIND, IP_TRANSPARENT,
IPV6_FREEBIND, and IPV6_TRANSPARENT, TCP_CORK and TCP_NODELAY
- support cmsgs: TCP_INQ
- improvements in the data scheduler (assigning data to subflows)
- support fastclose option (quick shutdown of the full MPTCP
connection, similar to TCP RST in regular TCP)
- MCTP (Management Component Transport) over serial, as defined by
DMTF spec DSP0253 - "MCTP Serial Transport Binding".
Driver API
----------
- Support timestamping on bond interfaces in active/passive mode.
- Introduce generic phylink link mode validation for drivers which
don't have any quirks and where MAC capability bits fully express
what's supported. Allow PCS layer to participate in the validation.
Convert a number of drivers.
- Add support to set/get size of buffers on the Rx rings and size of
the tx copybreak buffer via ethtool.
- Support offloading TC actions as first-class citizens rather than
only as attributes of filters, improve sharing and device resource
utilization.
- WiFi (mac80211/cfg80211):
- support forwarding offload (ndo_fill_forward_path)
- support for background radar detection hardware
- SA Query Procedures offload on the AP side
New hardware / drivers
----------------------
- tsnep - FPGA based TSN endpoint Ethernet MAC used in PLCs with
real-time requirements for isochronous communication with protocols
like OPC UA Pub/Sub.
- Qualcomm BAM-DMUX WWAN - driver for data channels of modems
integrated into many older Qualcomm SoCs, e.g. MSM8916 or
MSM8974 (qcom_bam_dmux).
- Microchip LAN966x multi-port Gigabit AVB/TSN Ethernet Switch
driver with support for bridging, VLANs and multicast forwarding
(lan966x).
- iwlmei driver for co-operating between Intel's WiFi driver and
Intel's Active Management Technology (AMT) devices.
- mse102x - Vertexcom MSE102x Homeplug GreenPHY chips
- Bluetooth:
- MediaTek MT7921 SDIO devices
- Foxconn MT7922A
- Realtek RTL8852AE
Drivers
-------
- Significantly improve performance in the datapaths of:
lan78xx, ax88179_178a, lantiq_xrx200, bnxt.
- Intel Ethernet NICs:
- igb: support PTP/time PEROUT and EXTTS SDP functions on
82580/i354/i350 adapters
- ixgbevf: new PF -> VF mailbox API which avoids the risk of
mailbox corruption with ESXi
- iavf: support configuration of VLAN features of finer granularity,
stacked tags and filtering
- ice: PTP support for new E822 devices with sub-ns precision
- ice: support firmware activation without reboot
- Mellanox Ethernet NICs (mlx5):
- expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
- support TC forwarding when tunnel encap and decap happen between
two ports of the same NIC
- dynamically size and allow disabling various features to save
resources for running in embedded / SmartNIC scenarios
- Broadcom Ethernet NICs (bnxt):
- use page frag allocator to improve Rx performance
- expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
- Other Ethernet NICs:
- amd-xgbe: add Ryzen 6000 (Yellow Carp) Ethernet support
- Microsoft cloud/virtual NIC (mana):
- add XDP support (PASS, DROP, TX)
- Mellanox Ethernet switches (mlxsw):
- initial support for Spectrum-4 ASICs
- VxLAN with IPv6 underlay
- Marvell Ethernet switches (prestera):
- support flower flow templates
- add basic IP forwarding support
- NXP embedded Ethernet switches (ocelot & felix):
- support Per-Stream Filtering and Policing (PSFP)
- enable cut-through forwarding between ports by default
- support FDMA to improve packet Rx/Tx to CPU
- Other embedded switches:
- hellcreek: improve trapping management (STP and PTP) packets
- qca8k: support link aggregation and port mirroring
- Qualcomm 802.11ax WiFi (ath11k):
- qca6390, wcn6855: enable 802.11 power save mode in station mode
- BSS color change support
- WCN6855 hw2.1 support
- 11d scan offload support
- scan MAC address randomization support
- full monitor mode, only supported on QCN9074
- qca6390/wcn6855: report signal and tx bitrate
- qca6390: rfkill support
- qca6390/wcn6855: regdb.bin support
- Intel WiFi (iwlwifi):
- support SAR GEO Offset Mapping (SGOM) and Time-Aware-SAR (TAS)
in cooperation with the BIOS
- support for Optimized Connectivity Experience (OCE) scan
- support firmware API version 68
- lots of preparatory work for the upcoming Bz device family
- MediaTek WiFi (mt76):
- Specific Absorption Rate (SAR) support
- mt7921: 160 MHz channel support
- RealTek WiFi (rtw88):
- Specific Absorption Rate (SAR) support
- scan offload
- Other WiFi NICs
- ath10k: support fetching (pre-)calibration data from nvmem
- brcmfmac: configure keep-alive packet on suspend
- wcn36xx: beacon filter support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=KLm3
-----END PGP SIGNATURE-----
Merge tag '5.17-net-next' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core
----
- Defer freeing TCP skbs to the BH handler, whenever possible, or at
least perform the freeing outside of the socket lock section to
decrease cross-CPU allocator work and improve latency.
- Add netdevice refcount tracking to locate sources of netdevice and
net namespace refcount leaks.
- Make Tx watchdog less intrusive - avoid pausing Tx and restarting
all queues from a single CPU removing latency spikes.
- Various small optimizations throughout the stack from Eric Dumazet.
- Make netdev->dev_addr[] constant, force modifications to go via
appropriate helpers to allow us to keep addresses in ordered data
structures.
- Replace unix_table_lock with per-hash locks, improving performance
of bind() calls.
- Extend skb drop tracepoint with a drop reason.
- Allow SO_MARK and SO_PRIORITY setsockopt under CAP_NET_RAW.
BPF
---
- New helpers:
- bpf_find_vma(), find and inspect VMAs for profiling use cases
- bpf_loop(), runtime-bounded loop helper trading some execution
time for much faster (if at all converging) verification
- bpf_strncmp(), improve performance, avoid compiler flakiness
- bpf_get_func_arg(), bpf_get_func_ret(), bpf_get_func_arg_cnt()
for tracing programs, all inlined by the verifier
- Support BPF relocations (CO-RE) in the kernel loader.
- Further the support for BTF_TYPE_TAG annotations.
- Allow access to local storage in sleepable helpers.
- Convert verifier argument types to a composable form with different
attributes which can be shared across types (ro, maybe-null).
- Prepare libbpf for upcoming v1.0 release by cleaning up APIs,
creating new, extensible ones where missing and deprecating those
to be removed.
Protocols
---------
- WiFi (mac80211/cfg80211):
- notify user space about long "come back in N" AP responses,
allow it to react to such temporary rejections
- allow non-standard VHT MCS 10/11 rates
- use coarse time in airtime fairness code to save CPU cycles
- Bluetooth:
- rework of HCI command execution serialization to use a common
queue and work struct, and improve handling errors reported in
the middle of a batch of commands
- rework HCI event handling to use skb_pull_data, avoiding packet
parsing pitfalls
- support AOSP Bluetooth Quality Report
- SMC:
- support net namespaces, following the RDMA model
- improve connection establishment latency by pre-clearing buffers
- introduce TCP ULP for automatic redirection to SMC
- Multi-Path TCP:
- support ioctls: SIOCINQ, OUTQ, and OUTQNSD
- support socket options: IP_TOS, IP_FREEBIND, IP_TRANSPARENT,
IPV6_FREEBIND, and IPV6_TRANSPARENT, TCP_CORK and TCP_NODELAY
- support cmsgs: TCP_INQ
- improvements in the data scheduler (assigning data to subflows)
- support fastclose option (quick shutdown of the full MPTCP
connection, similar to TCP RST in regular TCP)
- MCTP (Management Component Transport) over serial, as defined by
DMTF spec DSP0253 - "MCTP Serial Transport Binding".
Driver API
----------
- Support timestamping on bond interfaces in active/passive mode.
- Introduce generic phylink link mode validation for drivers which
don't have any quirks and where MAC capability bits fully express
what's supported. Allow PCS layer to participate in the validation.
Convert a number of drivers.
- Add support to set/get size of buffers on the Rx rings and size of
the tx copybreak buffer via ethtool.
- Support offloading TC actions as first-class citizens rather than
only as attributes of filters, improve sharing and device resource
utilization.
- WiFi (mac80211/cfg80211):
- support forwarding offload (ndo_fill_forward_path)
- support for background radar detection hardware
- SA Query Procedures offload on the AP side
New hardware / drivers
----------------------
- tsnep - FPGA based TSN endpoint Ethernet MAC used in PLCs with
real-time requirements for isochronous communication with protocols
like OPC UA Pub/Sub.
- Qualcomm BAM-DMUX WWAN - driver for data channels of modems
integrated into many older Qualcomm SoCs, e.g. MSM8916 or MSM8974
(qcom_bam_dmux).
- Microchip LAN966x multi-port Gigabit AVB/TSN Ethernet Switch driver
with support for bridging, VLANs and multicast forwarding
(lan966x).
- iwlmei driver for co-operating between Intel's WiFi driver and
Intel's Active Management Technology (AMT) devices.
- mse102x - Vertexcom MSE102x Homeplug GreenPHY chips
- Bluetooth:
- MediaTek MT7921 SDIO devices
- Foxconn MT7922A
- Realtek RTL8852AE
Drivers
-------
- Significantly improve performance in the datapaths of: lan78xx,
ax88179_178a, lantiq_xrx200, bnxt.
- Intel Ethernet NICs:
- igb: support PTP/time PEROUT and EXTTS SDP functions on
82580/i354/i350 adapters
- ixgbevf: new PF -> VF mailbox API which avoids the risk of
mailbox corruption with ESXi
- iavf: support configuration of VLAN features of finer
granularity, stacked tags and filtering
- ice: PTP support for new E822 devices with sub-ns precision
- ice: support firmware activation without reboot
- Mellanox Ethernet NICs (mlx5):
- expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
- support TC forwarding when tunnel encap and decap happen between
two ports of the same NIC
- dynamically size and allow disabling various features to save
resources for running in embedded / SmartNIC scenarios
- Broadcom Ethernet NICs (bnxt):
- use page frag allocator to improve Rx performance
- expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
- Other Ethernet NICs:
- amd-xgbe: add Ryzen 6000 (Yellow Carp) Ethernet support
- Microsoft cloud/virtual NIC (mana):
- add XDP support (PASS, DROP, TX)
- Mellanox Ethernet switches (mlxsw):
- initial support for Spectrum-4 ASICs
- VxLAN with IPv6 underlay
- Marvell Ethernet switches (prestera):
- support flower flow templates
- add basic IP forwarding support
- NXP embedded Ethernet switches (ocelot & felix):
- support Per-Stream Filtering and Policing (PSFP)
- enable cut-through forwarding between ports by default
- support FDMA to improve packet Rx/Tx to CPU
- Other embedded switches:
- hellcreek: improve trapping management (STP and PTP) packets
- qca8k: support link aggregation and port mirroring
- Qualcomm 802.11ax WiFi (ath11k):
- qca6390, wcn6855: enable 802.11 power save mode in station mode
- BSS color change support
- WCN6855 hw2.1 support
- 11d scan offload support
- scan MAC address randomization support
- full monitor mode, only supported on QCN9074
- qca6390/wcn6855: report signal and tx bitrate
- qca6390: rfkill support
- qca6390/wcn6855: regdb.bin support
- Intel WiFi (iwlwifi):
- support SAR GEO Offset Mapping (SGOM) and Time-Aware-SAR (TAS)
in cooperation with the BIOS
- support for Optimized Connectivity Experience (OCE) scan
- support firmware API version 68
- lots of preparatory work for the upcoming Bz device family
- MediaTek WiFi (mt76):
- Specific Absorption Rate (SAR) support
- mt7921: 160 MHz channel support
- RealTek WiFi (rtw88):
- Specific Absorption Rate (SAR) support
- scan offload
- Other WiFi NICs
- ath10k: support fetching (pre-)calibration data from nvmem
- brcmfmac: configure keep-alive packet on suspend
- wcn36xx: beacon filter support"
* tag '5.17-net-next' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2048 commits)
tcp: tcp_send_challenge_ack delete useless param `skb`
net/qla3xxx: Remove useless DMA-32 fallback configuration
rocker: Remove useless DMA-32 fallback configuration
hinic: Remove useless DMA-32 fallback configuration
lan743x: Remove useless DMA-32 fallback configuration
net: enetc: Remove useless DMA-32 fallback configuration
cxgb4vf: Remove useless DMA-32 fallback configuration
cxgb4: Remove useless DMA-32 fallback configuration
cxgb3: Remove useless DMA-32 fallback configuration
bnx2x: Remove useless DMA-32 fallback configuration
et131x: Remove useless DMA-32 fallback configuration
be2net: Remove useless DMA-32 fallback configuration
vmxnet3: Remove useless DMA-32 fallback configuration
bna: Simplify DMA setting
net: alteon: Simplify DMA setting
myri10ge: Simplify DMA setting
qlcnic: Simplify DMA setting
net: allwinner: Fix print format
page_pool: remove spinlock in page_pool_refill_alloc_cache()
amt: fix wrong return type of amt_send_membership_update()
...
When running 'perf trace' with an BPF object like:
# perf trace -e openat,tools/perf/examples/bpf/hello.c
the event parsing eventually calls llvm__get_kbuild_opts() that runs a
script and that ends up with SIGCHLD delivered to the 'perf trace'
handler, which assumes the workload process is done and quits 'perf
trace'.
Move the SIGCHLD handler setup directly to trace__run(), where the event
is parsed and the object is already compiled.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Christy Lee <christyc.y.lee@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220106222030.227499-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
bpf_obj__find_program_by_title() in libbpf is going to be deprecated.
Call bpf_object_for_each_program to find a program in the section with
a given name instead.
Signed-off-by: Kui-Feng Lee <kuifeng@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211214035931.1148209-4-kuifeng@fb.com
Add new '__rel_loc' dynamic data location attribute support.
This type attribute is similar to the '__data_loc' but records the
offset from the field itself.
The libtraceevent adds TEP_FIELD_IS_RELATIVE to the
'tep_format_field::flags' with TEP_FIELD_IS_DYNAMIC for'__rel_loc'.
Link: https://lkml.kernel.org/r/163757344810.510314.12449413842136229871.stgit@devnote2
Cc: Beau Belgrave <beaub@linux.microsoft.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
parse_events() may succeed but leave string memory allocations reachable
in the error.
Add an init/exit that must be called to initialize and clean up the
error. This fixes a leak in metricgroup parse_ids.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20211107090002.3784612-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Group error functions and name after the data type they manipulate.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20211107090002.3784612-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Depending on the use case, it might require some kind of synthesizing
and some not. Make it controllable to turn off heavy operations like
MMAP for all tasks.
Currently all users are converted to enable all the synthesis by
default. It'll be updated in the later patch.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https //lore.kernel.org/r/20210811044658.1313391-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The repipe argument is only used by perf inject and the all others
passes 'false'. Let's remove it from the function signature and add
__perf_session__new() to be called from perf inject directly.
This is a preparation of the change the pipe input/output.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210719223153.1618812-2-namhyung@kernel.org
[ Fixed up some trivial conflicts as this patchset fell thru the cracks ;-( ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As 'enum bpf_cmd' has been extended a lot, update the cmd string table to
decode sys_bpf first arg clearly in perf-trace.
Signed-off-by: Wei Li <liwei391@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Li Bin <huawei.libin@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20210714015000.2844867-1-liwei391@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
ASan reports several memory leaks running:
# perf test "88: Check open filename arg using perf trace + vfs_getname"
The fourth of these leaks is related to some strings never being freed
in trace__parse_events_option.
This patch adds the missing frees.
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/34d08535b11124106b859790549991abff5a7de8.1626343282.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
ASan reports several memory leaks running:
# perf test "88: Check open filename arg using perf trace + vfs_getname"
The third of these leaks is related to evsel->priv fields of sycalls
never being deallocated.
This patch adds the function evlist__free_syscall_tp_fields which
iterates over all evsels in evlist, matching syscalls, and calling the
missing frees.
This new function is called at the end of trace__run, right before
calling evlist__delete.
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/46526611904ec5ff2768b59014e3afce8e0197d1.1626343282.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
ASan reports several memory leaks running:
# perf test "88: Check open filename arg using perf trace + vfs_getname"
The second of these leaks is caused by the arg_fmt field of syscall not
being deallocated.
This patch adds a new function syscall__exit which is called on all
syscalls.table entries in trace__exit, which will free the arg_fmt
field.
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/d68f25c043d30464ac9fa79c3399e18f429bca82.1626343282.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
ASan reports several memory leaks running:
# perf test "88: Check open filename arg using perf trace + vfs_getname"
The first of these leaks is related to struct trace fields never being
deallocated.
This patch adds the function trace__exit, which is called at the end of
cmd_trace, replacing the existing deallocation, which is now moved
inside the new function.
This function deallocates:
- ev_qualifier
- ev_qualifier_ids.entries
- syscalls.table
- sctbl
- perfconfig_events
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/de5945ed5c0cb882cbfa3268567d0bff460ff016.1626343282.git.rickyman7@gmail.com
[ Removed needless initialization to zero, missing named initializers are zeroed by the compiler ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since a lot of stuff happens before the SIGINT signal handler is registered
(scanning /proc/*, etc.), on bigger systems, such as Cavium Sabre CN99xx,
it may happen that first interrupt signal is lost and perf isn't correctly
terminated.
The reproduction code might look like the following:
perf trace -a &
PERF_PID=$!
sleep 4
kill -INT $PERF_PID
The issue has been found on a CN99xx machine with RHEL-8 and the patch fixes
it by registering the signal handlers earlier in the init stage.
Suggested-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Tested-by: Michael Petlan <mpetlan@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/lkml/YEJnaMzH2ctp3PPx@kernel.org/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_evlist__ is for 'struct perf_evlist' methods, in tools/lib/perf/,
go on completing this split.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_evlist__ is for 'struct perf_evlist' methods, in tools/lib/perf/,
go on completing this split.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_evlist__ is for 'struct perf_evlist' methods, in tools/lib/perf/,
go on completing this split.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_evlist__ is for 'struct perf_evlist' methods, in tools/lib/perf/,
go on completing this split.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_evlist__ is for 'struct perf_evlist' methods, in tools/lib/perf/,
go on completing this split.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_evlist__ is for 'struct perf_evlist' methods, in tools/lib/perf/,
go on completing this split.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_evlist__ is for 'struct perf_evlist' methods, in tools/lib/perf/,
go on completing this split.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_evlist__ is for 'struct perf_evlist' methods, in tools/lib/perf/,
go on completing this split.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf trace ls' started crashing after commit d21cb73a90 on
!HAVE_SYSCALL_TABLE_SUPPORT configs (armv7l here) like this:
0 strlen () at ../sysdeps/arm/armv6t2/strlen.S:126
1 0xb6800780 in __vfprintf_internal (s=0xbeff9908, s@entry=0xbeff9900, format=0xa27160 "]: %s()", ap=..., mode_flags=<optimized out>) at vfprintf-internal.c:1688
...
5 0x0056ecdc in fprintf (__fmt=0xa27160 "]: %s()", __stream=<optimized out>) at /usr/include/bits/stdio2.h:100
6 trace__sys_exit (trace=trace@entry=0xbeffc710, evsel=evsel@entry=0xd968d0, event=<optimized out>, sample=sample@entry=0xbeffc3e8) at builtin-trace.c:2475
7 0x00566d40 in trace__handle_event (sample=0xbeffc3e8, event=<optimized out>, trace=0xbeffc710) at builtin-trace.c:3122
...
15 main (argc=2, argv=0xbefff6e8) at perf.c:538
It is because memset in trace__read_syscall_info zeroes wrong memory:
1) when initializing for the first time, it does not reset the last id.
2) in other cases, it resets the last id of previous buffer.
ad 1) it causes the crash above as sc->name used in the fprintf above
contains garbage.
ad 2) it sets nonexistent from true back to false for id 11 here. Not
sure, what the consequences are.
So fix it by introducing a special case for the initial initialization
and do the right +1 in both cases.
Fixes: d21cb73a90 ("perf trace: Grow the syscall table as needed when using libaudit")
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20201001093419.15761-1-jslaby@suse.cz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Extend -D,--delay option with -1 to start collection with events
disabled to be enabled later by 'enable' command provided via control
file descriptor.
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/3e7d362c-7973-ee5d-e81e-c60ea22432c3@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To differentiate from libperf's 'struct perf_evlist' methods.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To differentiate from libperf's 'struct perf_evlist' methods.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The audit-libs API doesn't provide a way to figure out what is the
syscall with the greatest number/id, take that into account when using
that method to go on growing the syscall table as we the syscalls go on
appearing on the radar.
With this the libaudit based method is back working, i.e. when building
with:
$ make NO_SYSCALL_TABLE=1 O=/tmp/build/perf -C tools/perf install-bin
<SNIP>
Auto-detecting system features:
<SNIP>
... libaudit: [ on ]
... libbfd: [ on ]
... libcap: [ on ]
<SNIP>
$ ldd ~/bin/perf | grep audit
libaudit.so.1 => /lib64/libaudit.so.1 (0x00007faef22df000)
$
perf trace is back working, which makes it functional in arches other
than x86_64, powerpc, arm64 and s390, that provides these generators:
$ find tools/perf/arch/ -name "*syscalltbl*"
tools/perf/arch/x86/entry/syscalls/syscalltbl.sh
tools/perf/arch/arm64/entry/syscalls/mksyscalltbl
tools/perf/arch/s390/entry/syscalls/mksyscalltbl
tools/perf/arch/powerpc/entry/syscalls/mksyscalltbl
$
Example output forcing the libaudit method on x86_64:
# perf trace -e file,nanosleep sleep 0.001
? ( ): sleep/859090 ... [continued]: execve()) = 0
0.045 ( 0.005 ms): sleep/859090 access(filename: 0x8733e850, mode: R) = -1 ENOENT (No such file or directory)
0.055 ( 0.005 ms): sleep/859090 openat(dfd: CWD, filename: 0x8733ba29, flags: RDONLY|CLOEXEC) = 3
0.079 ( 0.005 ms): sleep/859090 openat(dfd: CWD, filename: 0x87345d20, flags: RDONLY|CLOEXEC) = 3
0.085 ( 0.002 ms): sleep/859090 read(fd: 3, buf: 0x7ffd9d483f58, count: 832) = 832
0.090 ( 0.002 ms): sleep/859090 read(fd: 3, buf: 0x7ffd9d483b50, count: 784) = 784
0.094 ( 0.002 ms): sleep/859090 read(fd: 3, buf: 0x7ffd9d483b20, count: 32) = 32
0.098 ( 0.002 ms): sleep/859090 read(fd: 3, buf: 0x7ffd9d483ad0, count: 68) = 68
0.109 ( 0.002 ms): sleep/859090 read(fd: 3, buf: 0x7ffd9d483a50, count: 784) = 784
0.113 ( 0.002 ms): sleep/859090 read(fd: 3, buf: 0x7ffd9d483730, count: 32) = 32
0.117 ( 0.002 ms): sleep/859090 read(fd: 3, buf: 0x7ffd9d483710, count: 68) = 68
0.320 ( 0.008 ms): sleep/859090 openat(dfd: CWD, filename: 0x872c3660, flags: RDONLY|CLOEXEC) = 3
0.372 ( 1.057 ms): sleep/859090 nanosleep(rqtp: 0x7ffd9d484ac0) = 0
#
There are still some limitations when using the libaudit method, that
will be fixed at some point, i.e., this works with the mksyscalltbl
method but not with libaudit's:
# perf trace -e file,*sleep sleep 0.001
event syntax error: '*sleep'
\___ parser error
Run 'perf list' for a list of valid events
Usage: perf trace [<options>] [<command>]
or: perf trace [<options>] -- <command> [<options>]
or: perf trace record [<options>] [<command>]
or: perf trace record [<options>] -- <command> [<options>]
-e, --event <event> event/syscall selector. use 'perf list' to list available events
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Leo Yan