The macros cpu_to_le16() and cpu_to_le32() have special cases for
constants. Their __constant_<foo> versions are not required.
On little endian systems, both cpu_to_le16() and __constant_cpu_to_le16()
expand to the same expression. Same is the case with cpu_to_le32().
On big endian systems, cpu_to_le16() expands to __swab16() which has a
__builtin_constant_p check. Similarly, cpu_to_le32() expands to __swab32().
Consequently these macros can be safely used with constants, and hence all
those uses are converted. This was discovered as a part of a checkpatch
evaluation, looking at all reports of WARNING:CONSTANT_CONVERSION error
type.
Link: https://lore.kernel.org/r/20210716112852.24598-1-dwaipayanray1@gmail.com
Signed-off-by: Dwaipayan Ray <dwaipayanray1@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The continue statement at the end of a for-loop has no effect, remove it.
Link: https://lore.kernel.org/r/20210617073743.151008-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Continue has no effect")
Subsequent commits allow the kernel to do ep_disconnect. In that case we
will have to get a proper refcount on the ep so one thread does not delete
it from under another.
Link: https://lore.kernel.org/r/20210525181821.7617-7-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During ep_disconnect we have been doing iscsi_suspend_tx/queue to block new
I/O but every driver except cxgbi and iscsi_tcp can still get I/O from
__iscsi_conn_send_pdu() if we haven't called iscsi_conn_failure() before
ep_disconnect. This could happen if we were terminating the session, and
the logout timed out before it was even sent to libiscsi.
Fix the issue by adding a helper which reverses the bind_conn call that
allows new I/O to be queued. Drivers implementing ep_disconnect can use this
to make sure new I/O is not queued to them when handling the disconnect.
Link: https://lore.kernel.org/r/20210525181821.7617-3-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following coccicheck warning:
./drivers/scsi/qla4xxx/ql4_83xx.c:475:23-25: WARNING !A || A && B is
equivalent to !A || B
Link: https://lore.kernel.org/r/20210414121726.12503-1-wanjiabing@vivo.com
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This was detected by building the kernel with clang and W=1.
Link: https://lore.kernel.org/r/20210415220826.29438-13-bvanassche@acm.org
Cc: Nilesh Javali <njavali@marvell.com>
Acked-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Eliminate the following coccicheck warning:
drivers/scsi/qla4xxx/ql4_os.c:4175:2-7: WARNING:
NULL check before some freeing functions is not needed.
drivers/scsi/qla4xxx/ql4_os.c:4196:2-7: WARNING:
NULL check before some freeing functions is not needed.
drivers/scsi/qla4xxx/ql4_os.c:4215:2-7: WARNING:
NULL check before some freeing functions is not needed.
drivers/scsi/qla4xxx/ql4_os.c:6400:2-7: WARNING:
NULL check before some freeing functions is not needed.
drivers/scsi/qla4xxx/ql4_os.c:6402:2-7: WARNING:
NULL check before some freeing functions is not needed.
drivers/scsi/qla4xxx/ql4_os.c:6555:2-7: WARNING:
NULL check before some freeing functions is not needed.
drivers/scsi/qla4xxx/ql4_os.c:6557:2-7: WARNING:
NULL check before some freeing functions is not needed.
drivers/scsi/qla4xxx/ql4_os.c:7838:2-7: WARNING:
NULL check before some freeing functions is not needed.
drivers/scsi/qla4xxx/ql4_os.c:7840:2-7: WARNING:
NULL check before some freeing functions is not needed.
Link: https://lore.kernel.org/r/20210409120345.6447-1-linqiheng@huawei.com
Signed-off-by: Qiheng Lin <linqiheng@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/qla4xxx/ql4_os.c:631: warning: expecting prototype for qla4xxx_create chap_list(). Prototype was for qla4xxx_create_chap_list() instead
drivers/scsi/qla4xxx/ql4_os.c:9643: warning: expecting prototype for gets called if(). Prototype was for qla4xxx_pci_mmio_enabled() instead
Link: https://lore.kernel.org/r/20210303144631.3175331-13-lee.jones@linaro.org
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Manish Rangankar <mrangankar@marvell.com>
Cc: GR-QLogic-Storage-Upstream@marvell.com
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Acked-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
__qla4xxx_is_chap_active() just wants to know if a session is online and
does not care about why it's not, so this has it use
iscsi_is_session_online().
This is not a bug now, but the next patch changes the behavior of
iscsi_session_chkready() so this patch just prepares the driver for that
change.
Link: https://lore.kernel.org/r/20210207044608.27585-9-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use standard SAM status definitions and drop the driver-defined ones.
Link: https://lore.kernel.org/r/20210113090500.129644-14-hare@suse.de
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The variable rval is being initialized with a value that is never read and
it is being updated later with a new value. The initialization is
redundant and can be removed.
Link: https://lore.kernel.org/r/20201204191810.1150995-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Unused value")
qla4_82xx_rom_lock() spins on a certain hardware state until it is
updated. At the end of each spin, if in_interrupt() is true, it does 20
loops of cpu_relax(). Otherwise, it yields the CPU.
While in_interrupt() is ill-defined and does not provide what the name
suggests, it is not needed here: qla4_82xx_rom_lock() is always called
from process context. Below is an analysis of its callers:
- ql4_nx.c: qla4_82xx_rom_fast_read(), all process context callers:
=> ql4_nx.c: qla4_82xx_pinit_from_rom(), GFP_KERNEL allocation
=> ql4_nx.c: qla4_82xx_load_from_flash(), msleep() in a loop
- ql4_nx.c: qla4_82xx_pinit_from_rom(), earlier discussed
- ql4_nx.c: qla4_82xx_rom_lock_recovery(), bound to "isp_operations"
->rom_lock_recovery() hook, which has one process context caller,
qla4_8xxx_device_bootstrap(), with callers:
=> ql4_83xx.c: qla4_83xx_need_reset_handler(), process, msleep()
=> ql4_nx.c: qla4_8xxx_device_state_handler(), multiple msleep()s
- ql4_nx.c: qla4_82xx_read_flash_data(), has cond_resched()
Remove the in_interrupt() check. Mark, qla4_82xx_rom_lock(), and the
->rom_lock_recovery() hook, with "Context: task, can sleep".
Change qla4_82xx_rom_lock() implementation to sleep 20ms, instead of a
schedule(), for each spin. This is more deterministic, and it matches
the other implementations bound to ->rom_lock_recovery().
Link: https://lore.kernel.org/r/20201126132952.2287996-9-bigeasy@linutronix.de
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Manish Rangankar <mrangankar@marvell.com>
Cc: <GR-QLogic-Storage-Upstream@marvell.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
qla4_82xx_idc_lock() spins on a certain hardware state until it is
updated. At the end of each spin, if in_interrupt() is true, it does 20
loops of cpu_relax(). Otherwise, it yields the CPU.
While in_interrupt() is ill-defined and does not provide what the name
suggests, it is not needed here: qla4_82xx_idc_lock() is always called from
process context. Below is an analysis of its callers:
- ql4_nx.c: qla4_82xx_need_reset_handler(), 1-second msleep() in a
loop.
- ql4_nx.c: qla4_82xx_isp_reset(), calls
qla4_8xxx_device_state_handler(), which has multiple msleep()s.
Beside direct calls, qla4_82xx_idc_lock() is also bound to isp_operations
->idc_lock() hook. Other functions which are bound to the same hook,
e.g. qla4_83xx_drv_lock(), also have an msleep(). For completeness, below
is an analysis of all callers of that hook:
- ql4_83xx.c: qla4_83xx_need_reset_handler(), has an msleep()
- ql4_83xx.c: qla4_83xx_isp_reset(), calls
qla4_8xxx_device_state_handler(), which has multiple msleep()s.
- ql4_83xx.c: qla4_83xx_disable_pause(), all process context callers:
=> ql4_mbx.c: qla4xxx_mailbox_command(), msleep(), mutex_lock()
=> ql4_os.c: qla4xxx_recover_adapter(), schedule_timeout() in loop
=> ql4_os.c: qla4xxx_do_dpc(), workqueue context
- ql4_attr.c: qla4_8xxx_sysfs_write_fw_dump(), sysfs bin_attribute
->write() hook, process context
- ql4_mbx.c: qla4xxx_mailbox_command(), earlier discussed
- ql4_nx.c: qla4_8xxx_device_bootstrap(), callers:
=> ql4_83xx.c: qla4_83xx_need_reset_handler(), process, msleep()
=> ql4_nx.c: qla4_8xxx_device_state_handler(), earlier discussed
- ql4_nx.c: qla4_8xxx_need_qsnt_handler(), callers:
=> ql4_nx.c: qla4_8xxx_device_state_handler(), multiple msleep()s
=> ql4_os.c: qla4xxx_do_dpc(), workqueue context
- ql4_nx.c: qla4_8xxx_update_idc_reg(), callers:
=> ql4_nx.c: qla4_8xxx_device_state_handler(), earlier discussed
=> ql4_os.c: qla4_8xxx_error_recovery(), only called by
qla4xxx_pci_slot_reset(), which is bound to PCI ->slot_reset()
process-context hook
- ql4_nx.c: qla4_8xxx_device_state_handler(), earlier discussed
- ql4_os.c: qla4xxx_recover_adapter(), earlier discussed
- ql4_os.c: qla4xxx_do_dpc(), earlier discussed
Remove the in_interrupt() check. Mark, qla4_82xx_idc_lock(), and the
->idc_lock() hook itself, with "Context: task, can sleep".
Change qla4_82xx_idc_lock() implementation to sleep 100ms, instead of a
schedule(), for each spin. This is more deterministic, and it matches other
PCI HW locking functions in the driver.
Link: https://lore.kernel.org/r/20201126132952.2287996-8-bigeasy@linutronix.de
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Manish Rangankar <mrangankar@marvell.com>
Cc: <GR-QLogic-Storage-Upstream@marvell.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
qla4_82xx_crb_win_lock() spins on a certain hardware state until it's
updated. At the end of each spin, if in_interrupt() is true, it does 20
loops of cpu_relax(). Otherwise, it yields the CPU.
The in_interrupt() macro is ill-defined as it does not provide what the
name suggests, and it does not catch the intended use-case here.
qla4_82xx_crb_win_lock() is always invoked with scsi_qla_host::hw_lock
acquired, with disabled interrupts. If the caller is in process context, as
in qla4_82xx_need_reset_handler(), then in_interrupt() will return false
even though it is not allowed to call schedule().
Remove the in_interrupt() check.
Change qla4_82xx_crb_win_lock() specification to a purely atomic
function. Mark it as static, remove its forward declaration, and move it
above its callers. To avoid hammering the PCI bus while spinning, use a 10
micro-second delay instead of cpu_relax().
Link: https://lore.kernel.org/r/20201126132952.2287996-4-bigeasy@linutronix.de
Fixes: f4f5df23bf ("[SCSI] qla4xxx: Added support for ISP82XX")
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Manish Rangankar <mrangankar@marvell.com>
Cc: <GR-QLogic-Storage-Upstream@marvell.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The variable rval has been initialized with 'QLA_ERROR'. The assignment is
redundant in an error path. Remove it.
Link: https://lore.kernel.org/r/20201103120137.109717-1-jingxiangfeng@huawei.com
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The set of core changes here is Christoph's submission path cleanups.
These introduced a couple of regressions when first proposed so they
got held over from the initial merge window pull request to give more
testing time, which they've now had and Syzbot has confirmed the
regression it detected is fixed. The other main changes are two
driver updates (arcmsr, pm80xx) and assorted minor clean ups.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCX5MkQCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishRkuAPsEAR/W
NS7J7j66rF2x15xGR2CNB4R6FEBSd/hdOPp7cQEA4rtLKKI53W4oydKsfTux6N6o
MLZJIHM5nTitk++AVQs=
=QgpC
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"The set of core changes here is Christoph's submission path cleanups.
These introduced a couple of regressions when first proposed so they
got held over from the initial merge window pull request to give more
testing time, which they've now had and Syzbot has confirmed the
regression it detected is fixed.
The other main changes are two driver updates (arcmsr, pm80xx) and
assorted minor clean ups"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (38 commits)
scsi: qla2xxx: Fix return of uninitialized value in rval
scsi: core: Set sc_data_direction to DMA_NONE for no-transfer commands
scsi: sr: Initialize ->cmd_len
scsi: arcmsr: Update driver version to v1.50.00.02-20200819
scsi: arcmsr: Add support for ARC-1886 series RAID controllers
scsi: arcmsr: Fix device hot-plug monitoring timer stop
scsi: arcmsr: Remove unnecessary syntax
scsi: pm80xx: Driver version update
scsi: pm80xx: Increase the number of outstanding I/O supported to 1024
scsi: pm80xx: Remove DMA memory allocation for ccb and device structures
scsi: pm80xx: Increase number of supported queues
scsi: sym53c8xx_2: Fix sizeof() mismatch
scsi: isci: Fix a typo in a comment
scsi: qla4xxx: Fix inconsistent format argument type
scsi: myrb: Fix inconsistent format argument types
scsi: myrb: Remove redundant assignment to variable timeout
scsi: bfa: Fix error return in bfad_pci_init()
scsi: fcoe: Simplify the return expression of fcoe_sysfs_setup()
scsi: snic: Simplify the return expression of svnic_cq_alloc()
scsi: fnic: Simplify the return expression of vnic_wq_copy_alloc()
...
Here are some SPDX-specific changes for 5.10-rc1.
They include:
- driver fixes to make spdxcheck.pl work properly
- add GFDL licenses as "deprecated" but required due to some of
our documentation using them
- add Zlib license as "deprecated" but required because we have
code with this license in the tree.
- convert some drivers to have SPDX identifiers that previously
didn't have them.
All have been in linux-next for a very long time with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX4c6oA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yl35ACg2i+pP5CBExSzQUtA1Tx/UD2CVNMAoIAQChwj
SHZurDuyHkEiCdB+5n1u
=C9qR
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here are some SPDX-specific changes for 5.10-rc1.
They include:
- driver fixes to make spdxcheck.pl work properly
- add GFDL licenses as "deprecated" but required due to some of our
documentation using them
- add Zlib license as "deprecated" but required because we have code
with this license in the tree.
- convert some drivers to have SPDX identifiers that previously
didn't have them.
All have been in linux-next for a very long time with no reported
issues"
* tag 'spdx-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
scripts/spdxcheck.py: handle license identifiers in XML comments
net/mlx5: IPsec: make spdxcheck.py happy
LICENSES/deprecated: add Zlib license text
LICENSE: add GFDL deprecated licenses
net/qla3xxx: Convert to SPDX license identifiers
net/qlge: Convert to SPDX license identifiers
net/qlcnic: Convert to SPDX license identifiers
scsi/qla2xxx: Convert to SPDX license identifiers
scsi/qla4xxx: Convert to SPDX license identifiers
This series consists of the usual driver updates (ufs, qla2xxx, tcmu,
ibmvfc, lpfc, smartpqi, hisi_sas, qedi, qedf, mpt3sas) and minor bug
fixes. There are only three core changes: adding sense codes,
cleaning up noretry and adding an option for limitless retries.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCX4YulyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishaZDAQCT7rwG
UEZYHgYkU9EX9ERVBQM0SW4mLrxf3g3P5ioJsAEAtkclCM4QsIOP+MIPjIa0EyUY
khu0kcrmeFR2YwA8zhw=
=4w4S
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"The usual driver updates (ufs, qla2xxx, tcmu, ibmvfc, lpfc, smartpqi,
hisi_sas, qedi, qedf, mpt3sas) and minor bug fixes.
There are only three core changes: adding sense codes, cleaning up
noretry and adding an option for limitless retries"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (226 commits)
scsi: hisi_sas: Recover PHY state according to the status before reset
scsi: hisi_sas: Filter out new PHY up events during suspend
scsi: hisi_sas: Add device link between SCSI devices and hisi_hba
scsi: hisi_sas: Add check for methods _PS0 and _PR0
scsi: hisi_sas: Add controller runtime PM support for v3 hw
scsi: hisi_sas: Switch to new framework to support suspend and resume
scsi: hisi_sas: Use hisi_hba->cq_nvecs for calling calling synchronize_irq()
scsi: qedf: Remove redundant assignment to variable 'rc'
scsi: lpfc: Remove unneeded variable 'status' in lpfc_fcp_cpu_map_store()
scsi: snic: Convert to use DEFINE_SEQ_ATTRIBUTE macro
scsi: qla4xxx: Delete unneeded variable 'status' in qla4xxx_process_ddb_changed
scsi: sun_esp: Use module_platform_driver to simplify the code
scsi: sun3x_esp: Use module_platform_driver to simplify the code
scsi: sni_53c710: Use module_platform_driver to simplify the code
scsi: qlogicpti: Use module_platform_driver to simplify the code
scsi: mac_esp: Use module_platform_driver to simplify the code
scsi: jazz_esp: Use module_platform_driver to simplify the code
scsi: mvumi: Fix error return in mvumi_io_attach()
scsi: lpfc: Drop nodelist reference on error in lpfc_gen_req()
scsi: be2iscsi: Fix a theoretical leak in beiscsi_create_eqs()
...
Fix the following warning:
[drivers/scsi/qla4xxx/ql4_nx.c:3228]: (warning) %ld in format string (no. 1)
requires 'long' but the argument type is 'unsigned long'.
Link: https://lore.kernel.org/r/20200930022228.2840587-1-yebin10@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes coccicheck warning:
drivers/scsi/qla4xxx/ql4_init.c:1173:5-11: Unneeded variable: "status". Return "QLA_ERROR" on line 1195
Link: https://lore.kernel.org/r/20200916022749.348923-1-yebin10@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
All files in this driver directory contain the following notice:
See LICENSE.qla4xxx for copyright and licensing details.
LICENSE.qla4xxx can be found in Documentation/scsi/. The file contains:
- A copyright notice
This copyright notice is redundant as all files contain the same
copyright notice already
- A license notice
You may modify and redistribute the device driver code under the
GNU General Public License (a copy of which is attached hereto as
Exhibit A) published by the Free Software Foundation (version 2).
- The full GPLv2 license text
This can be replaced with the corresponding SPDX license identifier
(GPL-2.0-only) in the source files which reference this license
file.
- The full GPLv2 license text
A redundant copy of LICENSES/preferred/GPL-2.0
Remove the notices and add the SPDX license identifier GPL-2.0-only to the
source files.
Finally remove the now redundant LICENSE.qla4xxx file.
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update the size used in 'dma_free_coherent()' in order to match the one
used in the corresponding 'dma_alloc_coherent()'.
Link: https://lore.kernel.org/r/20200802101527.676054-1-christophe.jaillet@wanadoo.fr
Fixes: 4161cee52d ("[SCSI] qla4xxx: Add host statistics support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/qla4xxx/ql4_bsg.c:811: warning: Function parameter or member 'bsg_job' not described in 'qla4xxx_process_vendor_specific'
drivers/scsi/qla4xxx/ql4_bsg.c:811: warning: Excess function parameter 'job' description in 'qla4xxx_process_vendor_specific'
drivers/scsi/qla4xxx/ql4_bsg.c:858: warning: Function parameter or member 'bsg_job' not described in 'qla4xxx_bsg_request'
drivers/scsi/qla4xxx/ql4_bsg.c:858: warning: Excess function parameter 'job' description in 'qla4xxx_bsg_request'
Link: https://lore.kernel.org/r/20200723122446.1329773-18-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/qla4xxx/ql4_83xx.c: In function ‘qla4_83xx_dump_pause_control_regs’:
drivers/scsi/qla4xxx/ql4_83xx.c:1409:9: warning: variable ‘status’ set but not used [-Wunused-but-set-variable]
1409 | int i, status = QLA_SUCCESS;
| ^~~~~~
Link: https://lore.kernel.org/r/20200723122446.1329773-15-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Demote other headers which are clearly not kerneldoc.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/qla4xxx/ql4_nx.c:983: warning: Function parameter or member 'ha' not described in 'qla4_82xx_pinit_from_rom'
drivers/scsi/qla4xxx/ql4_nx.c:983: warning: Function parameter or member 'verbose' not described in 'qla4_82xx_pinit_from_rom'
drivers/scsi/qla4xxx/ql4_nx.c:3225: warning: Function parameter or member 'code' not described in 'qla4_8xxx_uevent_emit'
drivers/scsi/qla4xxx/ql4_nx.c:3697: warning: Function parameter or member 'ha' not described in 'qla4_82xx_read_optrom_data'
drivers/scsi/qla4xxx/ql4_nx.c:3697: warning: Function parameter or member 'buf' not described in 'qla4_82xx_read_optrom_data'
drivers/scsi/qla4xxx/ql4_nx.c:3697: warning: Function parameter or member 'offset' not described in 'qla4_82xx_read_optrom_data'
drivers/scsi/qla4xxx/ql4_nx.c:3697: warning: Function parameter or member 'length' not described in 'qla4_82xx_read_optrom_data'
Link: https://lore.kernel.org/r/20200721164148.2617584-34-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/qla4xxx/ql4_nx.c: In function ‘qla4_84xx_minidump_process_rddfe’:
drivers/scsi/qla4xxx/ql4_nx.c:2648:23: warning: variable ‘data_size’ set but not used [-Wunused-but-set-variable]
2648 | uint32_t poll, mask, data_size, modify_mask;
| ^~~~~~~~~
drivers/scsi/qla4xxx/ql4_nx.c: In function ‘qla4_84xx_minidump_process_rdmdio’:
drivers/scsi/qla4xxx/ql4_nx.c:2745:11: warning: variable ‘poll’ set but not used [-Wunused-but-set-variable]
2745 | uint32_t poll, mask;
| ^~~~
drivers/scsi/qla4xxx/ql4_nx.c: In function ‘qla4_84xx_minidump_process_pollwr’:
drivers/scsi/qla4xxx/ql4_nx.c:2816:47: warning: variable ‘mask’ set but not used [-Wunused-but-set-variable]
2816 | uint32_t addr1, addr2, value1, value2, poll, mask, r_value;
| ^~~~
Link: https://lore.kernel.org/r/20200721164148.2617584-33-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix one formatting issue, one misspelling and three missing descriptions.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/qla4xxx/ql4_isr.c:588: warning: Excess function parameter 'ret' description in 'qla4_83xx_loopback_in_progress'
drivers/scsi/qla4xxx/ql4_isr.c:661: warning: Function parameter or member 'mbox_status' not described in 'qla4xxx_isr_decode_mailbox'
drivers/scsi/qla4xxx/ql4_isr.c:661: warning: Excess function parameter 'mailbox_status' description in 'qla4xxx_isr_decode_mailbox'
drivers/scsi/qla4xxx/ql4_isr.c:1053: warning: Function parameter or member 'intr_status' not described in 'qla4_82xx_interrupt_service_routine'
drivers/scsi/qla4xxx/ql4_isr.c:1078: warning: Function parameter or member 'intr_status' not described in 'qla4xxx_interrupt_service_routine'
Link: https://lore.kernel.org/r/20200721164148.2617584-28-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/qla4xxx/ql4_os.c:4551: warning: Function parameter or member 't' not described in 'qla4xxx_timer'
drivers/scsi/qla4xxx/ql4_os.c:4551: warning: Excess function parameter 'ha' description in 'qla4xxx_timer'
drivers/scsi/qla4xxx/ql4_os.c:5312: warning: Function parameter or member 'work' not described in 'qla4xxx_do_dpc'
drivers/scsi/qla4xxx/ql4_os.c:5312: warning: Excess function parameter 'data' description in 'qla4xxx_do_dpc'
drivers/scsi/qla4xxx/ql4_os.c:8627: warning: Function parameter or member 'ent' not described in 'qla4xxx_probe_adapter'
drivers/scsi/qla4xxx/ql4_os.c:8627: warning: Excess function parameter 'pci_device_id' description in 'qla4xxx_probe_adapter'
drivers/scsi/qla4xxx/ql4_os.c:9008: warning: Function parameter or member 'pdev' not described in 'qla4xxx_remove_adapter'
drivers/scsi/qla4xxx/ql4_os.c:9008: warning: Excess function parameter 'pci_dev' description in 'qla4xxx_remove_adapter'
drivers/scsi/qla4xxx/ql4_os.c:9181: warning: Function parameter or member 'stgt' not described in 'qla4xxx_eh_wait_for_commands'
drivers/scsi/qla4xxx/ql4_os.c:9181: warning: Function parameter or member 'sdev' not described in 'qla4xxx_eh_wait_for_commands'
drivers/scsi/qla4xxx/ql4_os.c:9181: warning: Excess function parameter 't' description in 'qla4xxx_eh_wait_for_commands'
drivers/scsi/qla4xxx/ql4_os.c:9181: warning: Excess function parameter 'l' description in 'qla4xxx_eh_wait_for_commands'
drivers/scsi/qla4xxx/ql4_os.c:9646: warning: Function parameter or member 'pdev' not described in 'qla4xxx_pci_mmio_enabled'
Link: https://lore.kernel.org/r/20200721164148.2617584-27-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
from drivers/scsi/qla4xxx/ql4_iocb.c:8:
drivers/scsi/qla4xxx/ql4_iocb.c:87: warning: Function parameter or member 'mrkr_mod' not described in 'qla4xxx_send_marker_iocb'
drivers/scsi/qla4xxx/ql4_iocb.c:87: warning: Excess function parameter 'marker_type' description in 'qla4xxx_send_marker_iocb'
Link: https://lore.kernel.org/r/20200721164148.2617584-23-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Also demote incomplete header from kerneldoc.
Fixes the following W=1 kernel build warning(s):
from drivers/scsi/qla4xxx/ql4_mbx.c:9:
drivers/scsi/qla4xxx/ql4_mbx.c:53: warning: Excess function parameter 'ret' description in 'qla4xxx_is_intr_poll_mode'
drivers/scsi/qla4xxx/ql4_mbx.c:832: warning: Function parameter or member 'fw_ddb_entry_dma' not described in 'qla4xxx_get_fwddb_entry'
drivers/scsi/qla4xxx/ql4_mbx.c:832: warning: Function parameter or member 'conn_err_detail' not described in 'qla4xxx_get_fwddb_entry'
drivers/scsi/qla4xxx/ql4_mbx.c:832: warning: Function parameter or member 'tcp_source_port_num' not described in 'qla4xxx_get_fwddb_entry'
drivers/scsi/qla4xxx/ql4_mbx.c:832: warning: Function parameter or member 'connection_id' not described in 'qla4xxx_get_fwddb_entry'
drivers/scsi/qla4xxx/ql4_mbx.c:1271: warning: Function parameter or member 'ddb_entry' not described in 'qla4xxx_reset_target'
drivers/scsi/qla4xxx/ql4_mbx.c:1271: warning: Excess function parameter 'db_entry' description in 'qla4xxx_reset_target'
drivers/scsi/qla4xxx/ql4_mbx.c:1271: warning: Excess function parameter 'un_entry' description in 'qla4xxx_reset_target'
Link: https://lore.kernel.org/r/20200721164148.2617584-22-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
In file included from drivers/scsi/qla4xxx/ql4_def.h:43,
from drivers/scsi/qla4xxx/ql4_mbx.c:9:
drivers/scsi/qla4xxx/ql4_nx.h:602:23: warning: ‘qla4_82xx_reg_tbl’ defined but not used [-Wunused-const-variable=]
602 | static const uint32_t qla4_82xx_reg_tbl[] = {
| ^~~~~~~~~~~~~~~~~
[...]
NB: Lots of these
Link: https://lore.kernel.org/r/20200721164148.2617584-20-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/qla4xxx/ql4_os.c: In function ‘qla4xxx_eh_cmd_timed_out’:
drivers/scsi/qla4xxx/ql4_os.c:1865:24: warning: variable ‘sess’ set but not used [-Wunused-but-set-variable]
1865 | struct iscsi_session *sess;
| ^~~~
drivers/scsi/qla4xxx/ql4_os.c: In function ‘qla4xxx_session_create’:
drivers/scsi/qla4xxx/ql4_os.c:3079:19: warning: variable ‘dst_addr’ set but not used [-Wunused-but-set-variable]
3079 | struct sockaddr *dst_addr;
| ^~~~~~~~
drivers/scsi/qla4xxx/ql4_os.c: In function ‘qla4_8xxx_iospace_config’:
drivers/scsi/qla4xxx/ql4_os.c:5512:44: warning: variable ‘db_len’ set but not used [-Wunused-but-set-variable]
5512 | unsigned long mem_base, mem_len, db_base, db_len;
| ^~~~~~
drivers/scsi/qla4xxx/ql4_os.c:5512:35: warning: variable ‘db_base’ set but not used [-Wunused-but-set-variable]
5512 | unsigned long mem_base, mem_len, db_base, db_len;
| ^~~~~~~
drivers/scsi/qla4xxx/ql4_os.c: In function ‘qla4xxx_get_param_ddb’:
drivers/scsi/qla4xxx/ql4_os.c:6269:24: warning: variable ‘ha’ set but not used [-Wunused-but-set-variable]
6269 | struct scsi_qla_host *ha;
| ^~
Link: https://lore.kernel.org/r/20200721164148.2617584-19-lee.jones@linaro.org
Cc: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
'qla4_83xx_reg_tbl' is only used in 'drivers/scsi/qla4xxx/ql4_os.c', move
it there.
Fixes the following W=1 kernel build warning(s):
In file included from drivers/scsi/qla4xxx/ql4_def.h:46,
from drivers/scsi/qla4xxx/ql4_init.c:9:
At top level:
drivers/scsi/qla4xxx/ql4_83xx.h:90:23: warning: ‘qla4_83xx_reg_tbl’ defined but not used [-Wunused-const-variable=]
90 | static const uint32_t qla4_83xx_reg_tbl[] = {
| ^~~~~~~~~~~~~~~~~
In file included from drivers/scsi/qla4xxx/ql4_def.h:46,
from drivers/scsi/qla4xxx/ql4_mbx.c:9:
drivers/scsi/qla4xxx/ql4_83xx.h:90:23: warning: ‘qla4_83xx_reg_tbl’ defined but not used [-Wunused-const-variable=]
90 | static const uint32_t qla4_83xx_reg_tbl[] = {
| ^~~~~~~~~~~~~~~~~
[...]
NB: Lots of these - snipped for brevity.
Link: https://lore.kernel.org/r/20200721164148.2617584-15-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
pci_set_mwi() has 'warn_unused_result' so the result should be checked.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/qla4xxx/ql4_init.c: In function ‘qla4xxx_pci_config’:
drivers/scsi/qla4xxx/ql4_init.c:664:6: warning: variable ‘status’ set but not used [-Wunused-but-set-variable]
And if 'status' is removed:
drivers/scsi/qla4xxx/ql4_init.c: In function ‘qla4xxx_pci_config’:
drivers/scsi/qla4xxx/ql4_init.c:666:2: warning: ignoring return value of ‘pci_set_mwi’, declared with attribute warn_unused_result [-Wunused-result]
666 | pci_set_mwi(ha->pdev);
| ^~~~~~~~~~~~~~~~~~~~~
Link: https://lore.kernel.org/r/20200721164148.2617584-14-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/qla4xxx/ql4_init.c: In function ‘ql4xxx_set_mac_number’:
drivers/scsi/qla4xxx/ql4_init.c:17:10: warning: variable ‘func_number’ set but not used [-Wunused-but-set-variable]
Link: https://lore.kernel.org/r/20200721164148.2617584-13-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Kerneldoc function parameter references need to be in the format '@.*: ',
else the kerneldoc checker gets confused.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/qla4xxx/ql4_init.c: In function ‘ql4xxx_set_mac_number’:
drivers/scsi/qla4xxx/ql4_init.c:17:10: warning: variable ‘func_number’ set but not used [-Wunused-but-set-variable]
drivers/scsi/qla4xxx/ql4_init.c: In function ‘qla4xxx_pci_config’:
drivers/scsi/qla4xxx/ql4_init.c:664:6: warning: variable ‘status’ set but not used [-Wunused-but-set-variable]
from drivers/scsi/qla4xxx/ql4_init.c:9:
from drivers/scsi/qla4xxx/ql4_init.c:9:
drivers/scsi/qla4xxx/ql4_init.c:953: warning: Function parameter or member 'is_reset' not described in 'qla4xxx_initialize_adapter'
drivers/scsi/qla4xxx/ql4_init.c:1168: warning: Function parameter or member 'ha' not described in 'qla4xxx_process_ddb_changed'
drivers/scsi/qla4xxx/ql4_init.c:1168: warning: Function parameter or member 'fw_ddb_index' not described in 'qla4xxx_process_ddb_changed'
drivers/scsi/qla4xxx/ql4_init.c:1168: warning: Function parameter or member 'state' not described in 'qla4xxx_process_ddb_changed'
drivers/scsi/qla4xxx/ql4_init.c:1168: warning: Function parameter or member 'conn_err' not described in 'qla4xxx_process_ddb_changed'
Link: https://lore.kernel.org/r/20200713074645.126138-30-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Fix the following coccicheck warning:
drivers/scsi/qla4xxx/ql4_os.c:969:3-4: Unneeded semicolon
Link: https://lore.kernel.org/r/20200421034038.28113-1-yanaijie@huawei.com
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Clang warns:
../drivers/scsi/qla4xxx/ql4_os.c:4148:3: warning: misleading
indentation; statement is not part of the previous 'if'
[-Wmisleading-indentation]
if (ha->fw_dump)
^
../drivers/scsi/qla4xxx/ql4_os.c:4144:2: note: previous statement is
here
if (ha->queues)
^
1 warning generated.
This warning occurs because there is a space after the tab on this
line. Remove it so that the indentation is consistent with the Linux
kernel coding style and clang no longer warns.
Fixes: 068237c87c ("[SCSI] qla4xxx: Capture minidump for ISP82XX on firmware failure")
Link: https://github.com/ClangBuiltLinux/linux/issues/819
Link: https://lore.kernel.org/r/20191218015252.20890-1-natechancellor@gmail.com
Acked-by: Manish Rangankar <mrangankar@marvell.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On this error path we call qla4xxx_mem_free() and then the caller also
calls qla4xxx_free_adapter() which calls qla4xxx_mem_free(). It leads to a
couple double frees:
drivers/scsi/qla4xxx/ql4_os.c:8856 qla4xxx_probe_adapter() warn: 'ha->chap_dma_pool' double freed
drivers/scsi/qla4xxx/ql4_os.c:8856 qla4xxx_probe_adapter() warn: 'ha->fw_ddb_dma_pool' double freed
Fixes: afaf5a2d34 ("[SCSI] Initial Commit of qla4xxx")
Link: https://lore.kernel.org/r/20191203094421.hw7ex7qr3j2rbsmx@kili.mountain
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The variable init_fw_cb is released twice, resulting in a double free
bug. The call to the function dma_free_coherent() before goto is removed to
get rid of potential double free.
Fixes: 2a49a78ed3 ("[SCSI] qla4xxx: added IPv6 support.")
Link: https://lore.kernel.org/r/1572945927-27796-1-git-send-email-bianpan2016@163.com
Signed-off-by: Pan Bian <bianpan2016@163.com>
Acked-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We have a few submissions for 5.2 that depend on fixes merged post
5.1-rc1. Merge the fixes branch into queue.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In case iscsi_lookup_endpoint fails, the fix returns -EINVAL to avoid NULL
pointer dereference.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Acked-by: Manish Rangankar <mrangankar@marvell.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Clang -Wuninitialized notices that on is_qla40XX we never allocate any DMA
memory in get_fw_boot_info() but attempt to free it anyway:
drivers/scsi/qla4xxx/ql4_os.c:5915:7: error: variable 'buf_dma' is used uninitialized whenever 'if' condition is false
[-Werror,-Wsometimes-uninitialized]
if (!(val & 0x07)) {
^~~~~~~~~~~~~
drivers/scsi/qla4xxx/ql4_os.c:5985:47: note: uninitialized use occurs here
dma_free_coherent(&ha->pdev->dev, size, buf, buf_dma);
^~~~~~~
drivers/scsi/qla4xxx/ql4_os.c:5915:3: note: remove the 'if' if its condition is always true
if (!(val & 0x07)) {
^~~~~~~~~~~~~~~~~~~
drivers/scsi/qla4xxx/ql4_os.c:5885:20: note: initialize the variable 'buf_dma' to silence this warning
dma_addr_t buf_dma;
^
= 0
Skip the call to dma_free_coherent() here.
Fixes: 2a991c2159 ("[SCSI] qla4xxx: Boot from SAN support for open-iscsi")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This is mostly update of the usual drivers: arcmsr, qla2xxx, lpfc,
hisi_sas, target/iscsi and target/core. Additionally Christoph
refactored gdth as part of the dma changes. The major mid-layer
change this time is the removal of bidi commands and with them the
whole of the osd/exofs driver and filesystem.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXIC54SYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishT1GAPwJEV23
ExPiPsnuVgKj49nLTagZ3rILRQcYNbL+MNYqxQEA0cT8FHzSDBfWY5OKPNE+RQ8z
f69LpXGmMpuagKGvvd4=
=Fhy1
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This is mostly update of the usual drivers: arcmsr, qla2xxx, lpfc,
hisi_sas, target/iscsi and target/core.
Additionally Christoph refactored gdth as part of the dma changes. The
major mid-layer change this time is the removal of bidi commands and
with them the whole of the osd/exofs driver and filesystem. This is a
major simplification for block and mq in particular"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (240 commits)
scsi: cxgb4i: validate tcp sequence number only if chip version <= T5
scsi: cxgb4i: get pf number from lldi->pf
scsi: core: replace GFP_ATOMIC with GFP_KERNEL in scsi_scan.c
scsi: mpt3sas: Add missing breaks in switch statements
scsi: aacraid: Fix missing break in switch statement
scsi: kill command serial number
scsi: csiostor: drop serial_number usage
scsi: mvumi: use request tag instead of serial_number
scsi: dpt_i2o: remove serial number usage
scsi: st: osst: Remove negative constant left-shifts
scsi: ufs-bsg: Allow reading descriptors
scsi: ufs: Allow reading descriptor via raw upiu
scsi: ufs-bsg: Change the calling convention for write descriptor
scsi: ufs: Remove unused device quirks
Revert "scsi: ufs: disable vccq if it's not needed by UFS device"
scsi: megaraid_sas: Remove a bunch of set but not used variables
scsi: clean obsolete return values of eh_timed_out
scsi: sd: Optimal I/O size should be a multiple of physical block size
scsi: MAINTAINERS: SCSI initiator and target tweaks
scsi: fcoe: make use of fip_mode enum complete
...
Dwaipayan Ray