Convert QP object to follow IB/core general allocation scheme. That
change allows us to make sure that restrack properly kref the memory.
Link: https://lore.kernel.org/r/48e767124758aeecc433360ddd85eaa6325b34d9.1627040189.git.leonro@nvidia.com
Reviewed-by: Gal Pressman <galpress@amazon.com> #efa
Tested-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> #rdma and core
Tested-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Tested-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Compilation with W=1 produces warnings similar to the below.
drivers/infiniband/ulp/ipoib/ipoib_main.c:320: warning: This comment
starts with '/**', but isn't a kernel-doc comment. Refer
Documentation/doc-guide/kernel-doc.rst
All such occurrences were found with the following one line
git grep -A 1 "\/\*\*" drivers/infiniband/
Link: https://lore.kernel.org/r/e57d5f4ddd08b7a19934635b44d6d632841b9ba7.1623823612.git.leonro@nvidia.com
Reviewed-by: Jack Wang <jinpu.wang@ionos.com> #rtrs
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
init_port was only being used to register sysfs attributes against the
port kobject. Now that all users are creating static attribute_group's we
can simply set the attribute_group list in the ops and the core code can
just handle it directly.
This makes all the sysfs management quite straightforward and prevents any
driver from abusing the naked port kobject in future because no driver
code can access it.
Link: https://lore.kernel.org/r/114f68f3d921460eafe14cea5a80ca65d81729c3.1623427137.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Current code uses many different types when dealing with a port of a RDMA
device: u8, unsigned int and u32. Switch to u32 to clean up the logic.
This allows us to make (at least) the core view consistent and use the
same type. Unfortunately not all places can be converted. Many uverbs
functions expect port to be u8 so keep those places in order not to break
UAPIs. HW/Spec defined values must also not be changed.
With the switch to u32 we now can support devices with more than 255
ports. U32_MAX is reserved to make control logic a bit easier to deal
with. As a device with U32_MAX ports probably isn't going to happen any
time soon this seems like a non issue.
When a device with more than 255 ports is created uverbs will report the
RDMA device as having 255 ports as this is the max currently supported.
The verbs interface is not changed yet because the IBTA spec limits the
port size in too many places to be u8 and all applications that relies in
verbs won't be able to cope with this change. At this stage, we are
extending the interfaces that are using vendor channel solely
Once the limitation is lifted mlx5 in switchdev mode will be able to have
thousands of SFs created by the device. As the only instance of an RDMA
device that reports more than 255 ports will be a representor device and
it exposes itself as a RAW Ethernet only device CM/MAD/IPoIB and other
ULPs aren't effected by this change and their sysfs/interfaces that are
exposes to userspace can remain unchanged.
While here cleanup some alignment issues and remove unneeded sanity
checks (mainly in rdmavt),
Link: https://lore.kernel.org/r/20210301070420.439400-1-leon@kernel.org
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/sw/rdmavt/vt.c:300: warning: Function parameter or member 'context' not described in 'rvt_dealloc_ucontext'
Link: https://lore.kernel.org/r/20210121094519.2044049-8-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Use the ib_dma_* helpers to skip the DMA translation instead. This
removes the last user if dma_virt_ops and keeps the weird layering
violation inside the RDMA core instead of burderning the DMA mapping
subsystems with it. This also means the software RDMA drivers now don't
have to mess with DMA parameters that are not relevant to them at all, and
that in the future we can use PCI P2P transfers even for software RDMA, as
there is no first fake layer of DMA mapping that the P2P DMA support.
Link: https://lore.kernel.org/r/20201106181941.1878556-8-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Drivers that need a uverbs AH should instead set the create_user_ah() op
similar to reg_user_mr(). MODIFY_AH and QUERY_AH cmds were never
implemented so are just deleted.
Link: https://lore.kernel.org/r/11-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
These functions all depend on the driver providing a specific op:
- REREG_MR is rereg_user_mr(). bnxt_re set this without providing the op
- ATTACH/DEATCH_MCAST is attach_mcast()/detach_mcast(). usnic set this
without providing the op
- OPEN_QP doesn't involve the driver but requires a XRCD. qedr provides
xrcd but forgot to set it, usnic doesn't provide XRCD but set it anyhow.
- OPEN/CLOSE_XRCD are the ops alloc_xrcd()/dealloc_xrcd()
- CREATE_SRQ/DESTROY_SRQ are the ops create_srq()/destroy_srq()
- QUERY/MODIFY_SRQ is op query_srq()/modify_srq(). hns sets this but
sometimes supplies a NULL op.
- RESIZE_CQ is op resize_cq(). bnxt_re sets this boes doesn't supply an op
- ALLOC/DEALLOC_MW is alloc_mw()/dealloc_mw(). cxgb4 provided an
(now deleted) implementation but no userspace
All drivers were checked that no drivers provide the op without also
setting uverbs_cmd_mask so this should have no functional change.
Link: https://lore.kernel.org/r/4-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The code in setup_dma_device has become rather convoluted, move all of
this to the drivers. Drives now pass in a DMA capable struct device which
will be used to setup DMA, or drivers must fully configure the ibdev for
DMA and pass in NULL.
Other than setting the masks in rvt all drivers were doing this already
anyhow.
mthca, mlx4 and mlx5 were already setting up maximum DMA segment size for
DMA based on their hardweare limits in:
__mthca_init_one()
dma_set_max_seg_size (1G)
__mlx4_init_one()
dma_set_max_seg_size (1G)
mlx5_pci_init()
set_dma_caps()
dma_set_max_seg_size (2G)
Other non software drivers (except usnic) were extended to UINT_MAX [1, 2]
instead of 2G as was before.
[1] https://lore.kernel.org/linux-rdma/20200924114940.GE9475@nvidia.com/
[2] https://lore.kernel.org/linux-rdma/20200924114940.GE9475@nvidia.com/
Link: https://lore.kernel.org/r/20201008082752.275846-1-leon@kernel.org
Link: https://lore.kernel.org/r/6b2ed339933d066622d5715903870676d8cc523a.1602590106.git.mchehab+huawei@kernel.org
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
An incorrect sizeof is being used, struct rvt_ibport ** is not correct, it
should be struct rvt_ibport *. Note that since ** is the same size as
* this is not causing any issues. Improve this fix by using
sizeof(*rdi->ports) as this allows us to not even reference the type
of the pointer. Also remove line breaks as the entire statement can
fit on one line.
Link: https://lore.kernel.org/r/20201008095204.82683-1-colin.king@canonical.com
Addresses-Coverity: ("Sizeof not portable (SIZEOF_MISMATCH)")
Fixes: ff6acd6951 ("IB/rdmavt: Add device structure allocation")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Use FRWR method to register memory by default and remove the ancient and
unsafe FMR method.
Link: https://lore.kernel.org/r/10-v3-f58e6669d5d3+2cf-fmr_removal_jgg@mellanox.com
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Tested-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This routine was obsoleted by the patch below.
Delete it.
Fixes: a2a074ef39 ("RDMA: Handle ucontext allocations by IB/core")
Link: https://lore.kernel.org/r/20200316210454.7753.94689.stgit@awfm-01.aw.intel.com
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add kernel-doc for missing function parameters.
Remove excess kernel-doc descriptions.
Fix expected kernel-doc formatting (use ':' instead of '-' after @funcarg).
../drivers/infiniband/sw/rdmavt/ah.c:138: warning: Excess function parameter 'udata' description in 'rvt_destroy_ah'
../drivers/infiniband/sw/rdmavt/vt.c:698: warning: Function parameter or member 'pkey_table' not described in 'rvt_init_port'
../drivers/infiniband/sw/rdmavt/cq.c:561: warning: Excess function parameter 'rdi' description in 'rvt_driver_cq_init'
../drivers/infiniband/sw/rdmavt/cq.c:575: warning: Excess function parameter 'rdi' description in 'rvt_cq_exit'
../drivers/infiniband/sw/rdmavt/qp.c:2573: warning: Function parameter or member 'qp' not described in 'rvt_add_rnr_timer'
../drivers/infiniband/sw/rdmavt/qp.c:2573: warning: Function parameter or member 'aeth' not described in 'rvt_add_rnr_timer'
../drivers/infiniband/sw/rdmavt/qp.c:2591: warning: Function parameter or member 'qp' not described in 'rvt_stop_rc_timers'
../drivers/infiniband/sw/rdmavt/qp.c:2624: warning: Function parameter or member 'qp' not described in 'rvt_del_timers_sync'
../drivers/infiniband/sw/rdmavt/qp.c:2697: warning: Function parameter or member 'cb' not described in 'rvt_qp_iter_init'
../drivers/infiniband/sw/rdmavt/qp.c:2728: warning: Function parameter or member 'iter' not described in 'rvt_qp_iter_next'
../drivers/infiniband/sw/rdmavt/qp.c:2796: warning: Function parameter or member 'rdi' not described in 'rvt_qp_iter'
../drivers/infiniband/sw/rdmavt/qp.c:2796: warning: Function parameter or member 'v' not described in 'rvt_qp_iter'
../drivers/infiniband/sw/rdmavt/qp.c:2796: warning: Function parameter or member 'cb' not described in 'rvt_qp_iter'
Link: https://lore.kernel.org/r/20191010035240.251184229@gmail.com
Signed-off-by: Randy Dunlap <rd.dunlab@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Ensure that CQ is allocated and freed by IB/core and not by drivers.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Tested-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
No reason for every driver to emit code to set this, just make it part of
the driver's existing static const ops structure.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
No reason for every driver to emit code to set this, just make it part of
the driver's existing static const ops structure.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Convert SRQ allocation from drivers to be in the IB/core
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Simplify drivers by ensuring lifetime of ib_ah object. The changes
in .create_ah() go hand in hand with relevant update in .destroy_ah().
We will use this opportunity and convert .destroy_ah() to don't fail, as
it was suggested a long time ago, because there is nothing to do in case
of failure during destroy.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Following the PD conversion patch, do the same for ucontext allocations.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Now when we have the udata passed to all the ib_xxx object creation APIs
and the additional macro 'rdma_udata_to_drv_context' to get the
ib_ucontext from ib_udata stored in uverbs_attr_bundle, we can finally
start to remove the dependency of the drivers in the
ib_xxx->uobject->context.
Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The PD allocations in IB/core allows us to simplify drivers and their
error flows in their .alloc_pd() paths. The changes in .alloc_pd() go hand
in had with relevant update in .dealloc_pd().
We will use this opportunity and convert .dealloc_pd() to don't fail, as
it was suggested a long time ago, failures are not happening as we have
never seen a WARN_ON print.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
All callers to ib_alloc_device() provide a larger size than struct
ib_device and rely on the fact that struct ib_device is embedded in their
driver specific structure as the first member.
Provide a safer variant of ib_alloc_device() that checks and enforces this
approach to make sure the drivers are using it right.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Most provider routines are callback routines which ib core invokes.
_callback suffix doesn't convey information about when such callback is
invoked. Therefore, rename port_callback to init_port.
Additionally, store the init_port function pointer in ib_device_ops, so
that it can be accessed in subsequent patches when binding rdma device to
net namespace.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
As part of an audit process to update drivers to use rdma_restrack_add()
ensure that CTX objects is cleared before access.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Make all the required change to start use the ib_device_ops structure.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Initialize ib_device_ops with the supported operations using
ib_set_device_ops() and remove the use of check_driver_override().
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch moves hfi1_copy_sge() into rdmavt for sharing with qib.
This patch also moves all the wss_*() functions into rdmavt as
several wss_*() functions are called from hfi1_copy_sge()
When SGE copy mode is adaptive, cacheless copy may be done in some cases
for performance reasons. In those cases, X86 cacheless copy function
is called since the drivers that use rdmavt and may set SGE copy mode
to adaptive are X86 only. For this reason, this patch adds
"depends on X86_64" to rdmavt/Kconfig.
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The current code has two copies of the device name, ibdev->dev and
dev_name(&ibdev->dev), and they are setup at different times, which is
very confusing.
Set them both up at the same time and make dev_name() the lead name, which
is the proper use of the driver core APIs. To make it very clear that the
name is not valid until registration pass it in to the
ib_register_device() call rather than messing with ibdev->name directly.
Also the reorganization now checks that dev_name is unique even if it does
not contain a %.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Acked-by: Adit Ranadive <aditr@vmware.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Acked-by: Devesh Sharma <devesh.sharma@broadcom.com>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Currently the driver doesn't support completion vectors. These
are used to indicate which sets of CQs should be grouped together
into the same vector. A vector is a CQ processing thread that
runs on a specific CPU.
If an application has several CQs bound to different completion
vectors, and each completion vector runs on different CPUs, then
the completion queue workload is balanced. This helps scale as more
nodes are used.
Implement CQ completion vector support using a global workqueue
where a CQ entry is queued to the CPU corresponding to the CQ's
completion vector. Since the workqueue is global, it's guaranteed
to always be there when queueing CQ entries; Therefore, the RCU
locking for cq->rdi->worker in the hot path is superfluous.
Each completion vector is assigned to a different CPU. The number of
completion vectors available is computed by taking the number of
online, physical CPUs from the local NUMA node and subtracting the
CPUs used for kernel receive queues and the general interrupt.
Special use cases:
* If there are no CPUs left for completion vectors, the same CPU
for the general interrupt is used; Therefore, there would only
be one completion vector available.
* For multi-HFI systems, the number of completion vectors available
for each device is the total number of completion vectors in
the local NUMA node divided by the number of devices in the same
NUMA node. If there's a division remainder, the first device to
get initialized gets an extra completion vector.
Upon a CQ creation, an invalid completion vector could be specified.
Handle it as follows:
* If the completion vector is less than 0, set it to 0.
* Set the completion vector to the result of the passed completion
vector moded with the number of device completion vectors
available.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Extending uverbs_ioctl header with driver_id and another reserved
field. driver_id should be used in order to identify the driver.
Since every driver could have its own parsing tree, this is necessary
for strace support.
Downstream patches take off the EXPERIMENTAL flag from the ioctl() IB
support and thus we add some reserved fields for future usage.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The pointer rdi is being initialized with a value that is never read
and re-assigned immediately after, hence the initialization is redundant
and can be removed.
Cleans up clang warning:
drivers/infiniband/sw/rdmavt/vt.c:94:23: warning: Value stored to 'rdi'
during its initialization is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use correct parameter names and formatting in function kernel-doc notation
to eliminate warnings from scripts/kernel-doc.
../drivers/infiniband/sw/rdmavt/mr.c:784: warning: Excess function parameter 'ibmfr' description in 'rvt_map_phys_fmr'
../drivers/infiniband/sw/rdmavt/vt.c:234: warning: Excess function parameter 'intex' description in 'rvt_query_pkey'
../drivers/infiniband/sw/rdmavt/vt.c:266: warning: Excess function parameter 'index' description in 'rvt_query_gid'
../drivers/infiniband/sw/rdmavt/vt.c:306: warning: Excess function parameter 'data' description in 'rvt_alloc_ucontext'
../drivers/infiniband/sw/rdmavt/cq.c:65: warning: Excess function parameter 'sig' description in 'rvt_cq_enter'
../drivers/infiniband/sw/rdmavt/qp.c:279: warning: Excess function parameter 'qpt' description in 'rvt_free_all_qps'
../drivers/infiniband/sw/rdmavt/mcast.c:282: warning: Excess function parameter 'igd' description in 'rvt_attach_mcast'
../drivers/infiniband/sw/rdmavt/mcast.c:345: warning: Excess function parameter 'igd' description in 'rvt_detach_mcast'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: linux-doc@vger.kernel.org
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
rdmavt has a down call to client drivers to retrieve a crafted card
name.
This name should be the IB defined name.
Rather than craft the name each time it is needed, simply retrieve
the IB allocated name from the IB device.
Update the function name to reflect its application.
Clean up driver code to match this change.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Provide the ability for IB clients to modify the OPA specific
capability mask and include this mask in the subsequent trap data.
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Michael N. Henry <michael.n.henry@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Bart Van Assche noted that the ib DMA mapping code was significantly
similar enough to the core DMA mapping code that with a few changes
it was possible to remove the IB DMA mapping code entirely and
switch the RDMA stack to use the core DMA mapping code. This resulted
in a nice set of cleanups, but touched the entire tree. This branch
will be submitted separately to Linus at the end of the merge window
as per normal practice for tree wide changes like this.
-----BEGIN PGP SIGNATURE-----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=e0Si
-----END PGP SIGNATURE-----
Merge tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma DMA mapping updates from Doug Ledford:
"Drop IB DMA mapping code and use core DMA code instead.
Bart Van Assche noted that the ib DMA mapping code was significantly
similar enough to the core DMA mapping code that with a few changes it
was possible to remove the IB DMA mapping code entirely and switch the
RDMA stack to use the core DMA mapping code.
This resulted in a nice set of cleanups, but touched the entire tree
and has been kept separate for that reason."
* tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (37 commits)
IB/rxe, IB/rdmavt: Use dma_virt_ops instead of duplicating it
IB/core: Remove ib_device.dma_device
nvme-rdma: Switch from dma_device to dev.parent
RDS: net: Switch from dma_device to dev.parent
IB/srpt: Modify a debug statement
IB/srp: Switch from dma_device to dev.parent
IB/iser: Switch from dma_device to dev.parent
IB/IPoIB: Switch from dma_device to dev.parent
IB/rxe: Switch from dma_device to dev.parent
IB/vmw_pvrdma: Switch from dma_device to dev.parent
IB/usnic: Switch from dma_device to dev.parent
IB/qib: Switch from dma_device to dev.parent
IB/qedr: Switch from dma_device to dev.parent
IB/ocrdma: Switch from dma_device to dev.parent
IB/nes: Remove a superfluous assignment statement
IB/mthca: Switch from dma_device to dev.parent
IB/mlx5: Switch from dma_device to dev.parent
IB/mlx4: Switch from dma_device to dev.parent
IB/i40iw: Remove a superfluous assignment statement
IB/hns: Switch from dma_device to dev.parent
...
Change the drivers to call ib_query_port in their get port
immutable handler instead of their own query port handler.
Doing this required to set the core cap flags of this device
before the ib_query_port call is made, since the IB core might
need these caps to serve the port query.
Drivers are ensured by the IB core that the port attributes passed
to the port query verb implementation are zero, and hence we
removed the zeroing from the drivers.
This patch doesn't add any new functionality.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Acked-by: Adit Ranadive <aditr@vmware.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Make the rxe and rdmavt drivers use dma_virt_ops. Update the
comments that refer to the source files removed by this patch.
Remove struct ib_dma_mapping_ops. Remove ib_device.dma_ops.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Andrew Boyer <andrew.boyer@dell.com>
Cc: Dennis Dalessandro <dennis.dalessandro@intel.com>
Cc: Jonathan Toppins <jtoppins@redhat.com>
Cc: Alex Estrin <alex.estrin@intel.com>
Cc: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This implements the device specific function needed by the verbs
API function ib_map_mr_sg().
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Change rvt_post_one_wr to use the new table mechanism for
post send.
Validate that each low level driver specifies the table.
Reviewed-by: Jianxin Xiong <jianxin.xiong@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Functions required for MODIFY_PORT were incorrectly being
required for MODIFY_QP.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
rdi->ports has memory allocated in rvt_alloc_device(), but does not get
freed because the hfi1 and qib drivers drivers call ib_dealloc_device()
directly instead of going through rdmavt. Add a rvt_dealloc_device()
that frees rdi->ports and then calls ib_dealloc_device(). Switch hfi1
and qib drivers to calling rvt_dealloc_device() instead of
ib_dealloc_device() directly.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The new check routine causes a larger than supported frame size
on s390.
Changing the check routine to noinline fixes the issue.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
For each verb validate that all requirements for driver callbacks are met.
If a function is called without checking for a valid pointer, it is a
required function. Also document what each callback function does.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add, remove, and otherwise clean up existing comments that are leftover
from the initial code postings of rdmavt. Many of the comments were added
to provide an idea on the direction we were thinking of going. Now that the
design is solidified make a pass over and clean everything up. Also add
details where lacking.
Ensure all non static functions have nano comments.
Reviewed-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
rvt_query_port calls into the driver through a call back function
query_port_state to populate the rest of ib_port_attr elements.
rvt_modify_port calls into the driver if needed through a call back
function shut_down_port()
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Addin query gid support. Rdmavt still relies on the driver to maintain
the gid table. Rdmavt simply calls into the driver to retrive the guid
for a particular port.
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Cai Huoqing