Commit Graph

134 Commits

Author SHA1 Message Date
David Howells 9361401eb7 [PATCH] BLOCK: Make it possible to disable the block layer [try #6]
Make it possible to disable the block layer.  Not all embedded devices require
it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require
the block layer to be present.

This patch does the following:

 (*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev
     support.

 (*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls
     an item that uses the block layer.  This includes:

     (*) Block I/O tracing.

     (*) Disk partition code.

     (*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS.

     (*) The SCSI layer.  As far as I can tell, even SCSI chardevs use the
     	 block layer to do scheduling.  Some drivers that use SCSI facilities -
     	 such as USB storage - end up disabled indirectly from this.

     (*) Various block-based device drivers, such as IDE and the old CDROM
     	 drivers.

     (*) MTD blockdev handling and FTL.

     (*) JFFS - which uses set_bdev_super(), something it could avoid doing by
     	 taking a leaf out of JFFS2's book.

 (*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and
     linux/elevator.h contingent on CONFIG_BLOCK being set.  sector_div() is,
     however, still used in places, and so is still available.

 (*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and
     parts of linux/fs.h.

 (*) Makes a number of files in fs/ contingent on CONFIG_BLOCK.

 (*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK.

 (*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK
     is not enabled.

 (*) fs/no-block.c is created to hold out-of-line stubs and things that are
     required when CONFIG_BLOCK is not set:

     (*) Default blockdev file operations (to give error ENODEV on opening).

 (*) Makes some /proc changes:

     (*) /proc/devices does not list any blockdevs.

     (*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK.

 (*) Makes some compat ioctl handling contingent on CONFIG_BLOCK.

 (*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if
     given command other than Q_SYNC or if a special device is specified.

 (*) In init/do_mounts.c, no reference is made to the blockdev routines if
     CONFIG_BLOCK is not defined.  This does not prohibit NFS roots or JFFS2.

 (*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return
     error ENOSYS by way of cond_syscall if so).

 (*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if
     CONFIG_BLOCK is not set, since they can't then happen.

Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30 20:52:31 +02:00
David Howells 188f83dfe0 [PATCH] BLOCK: Move the msdos device ioctl compat stuff to the msdos driver [try #6]
Move the msdos device ioctl compat stuff from fs/compat_ioctl.c to the msdos
driver so that the msdos header file doesn't need to be included.

Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30 20:52:30 +02:00
David Howells 52a700c567 [PATCH] BLOCK: Move the Ext3 device ioctl compat stuff to the Ext3 driver [try #6]
Move the Ext3 device ioctl compat stuff from fs/compat_ioctl.c to the Ext3
driver so that the Ext3 header file doesn't need to be included.

Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30 20:52:29 +02:00
David Howells e322ff07fb [PATCH] BLOCK: Move the Ext2 device ioctl compat stuff to the Ext2 driver [try #6]
Move the Ext2 device ioctl compat stuff from fs/compat_ioctl.c to the Ext2
driver so that the Ext2 header file doesn't need to be included.

Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30 20:52:29 +02:00
David Howells 52b499c438 [PATCH] BLOCK: Move the ReiserFS device ioctl compat stuff to the ReiserFS driver [try #6]
Move the ReiserFS device ioctl compat stuff from fs/compat_ioctl.c to the
ReiserFS driver so that the ReiserFS header file doesn't need to be included.

Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30 20:52:28 +02:00
David Howells 36695673b0 [PATCH] BLOCK: Move common FS-specific ioctls to linux/fs.h [try #6]
Move common FS-specific ioctls from linux/ext2_fs.h to linux/fs.h as FS_IOC_*
and FS_IOC32_* and have the users of them use those as a base.

Also move the GETFLAGS/SETFLAGS flags to linux/fs.h as FS_*_FL macros, and then
have the other users use them as a base.

Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30 20:52:28 +02:00
David Howells 863d5b822c [PATCH] BLOCK: Move the loop device ioctl compat stuff to the loop driver [try #6]
Move the loop device ioctl compat stuff from fs/compat_ioctl.c to the loop
driver so that the loop header file doesn't need to be included.

Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30 20:52:27 +02:00
David Howells 07f3f05c1e [PATCH] BLOCK: Move extern declarations out of fs/*.c into header files [try #6]
Create a new header file, fs/internal.h, for common definitions local to the
sources in the fs/ directory.

Move extern definitions that should be in header files from fs/*.c to
fs/internal.h or other main header files where they span directories.

Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30 20:52:18 +02:00
Jörn Engel 6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Greg Kroah-Hartman d8deac5094 [PATCH] devfs: Remove devfs from the kernel tree
This is the first patch in a series of patches that removes devfs
support from the kernel.  This patch removes the core devfs code, and
its private header file.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-26 12:25:05 -07:00
Hansjoerg Lipp 5024ad4af6 [PATCH] i4l: Gigaset drivers: add IOCTLs to compat_ioctl.h
Add the IOCTLs of the Gigaset drivers to compat_ioctl.h in order to make
them available for 32 bit programs on 64 bit platforms.  Please merge.

Signed-off-by: Hansjoerg Lipp <hjlipp@web.de>
Acked-by: Tilman Schmidt <tilman@imap.cc>
Cc: Karsten Keil <kkeil@suse.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 09:58:23 -07:00
Andrew Morton 1b77c54ee1 V4L/DVB (3809a): Remove compat stuff for DMX_GET_EVENT
The ioctl were removed by:
V4L/DVB (3727): Remove DMX_GET_EVENT and associated data structures
due to the ioctl DMX_GET_EVENT has never been implemented, and also
scrambling events can't be generated in a useful way by the hardware.

This patch removes the corresponding entry at fs/compat_ioctl.c

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25 01:58:10 -03:00
Tobias Klauser e8c96f8c29 [PATCH] fs: Use ARRAY_SIZE macro
Use ARRAY_SIZE macro instead of sizeof(x)/sizeof(x[0]) and remove a
duplicate of ARRAY_SIZE.  Some trailing whitespaces are also deleted.

Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch>
Cc: David Howells <dhowells@redhat.com>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Acked-by: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Cc: Chris Mason <mason@suse.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Nathan Scott <nathans@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 07:33:19 -08:00
Jens Axboe 2056a782f8 [PATCH] Block queue IO tracing support (blktrace) as of 2006-03-23
Signed-off-by: Jens Axboe <axboe@suse.de>
2006-03-23 20:00:26 +01:00
Randy Dunlap 1efa3c05f8 [NET] compat ifconf: fix limits
A recent change to compat. dev_ifconf() in fs/compat_ioctl.c
causes ifconf data to be truncated 1 entry too early when copying it
to userspace.  The correct amount of data (length) is returned,
but the final entry is empty (zero, not filled in).
The for-loop 'i' check should use <= to allow the final struct
ifreq32 to be copied.  I also used the ifconf-corruption program
in kernel bugzilla #4746 to make sure that this change does not
re-introduce the corruption.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-08 16:46:08 -08:00
Andi Kleen fc5870f662 [PATCH] x86_64: Fix ioctl compat code for /dev/rtc
RTC_IRQP_SET/RTC_EPOCH_SET don't take a pointer to an argument, but the
argument itself.  This actually simplifies the code and makes it work.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-26 09:53:31 -08:00
Al Viro 6b2b4e5a26 [PATCH] compat_ioctl __user annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-02-08 01:04:01 -05:00
Andi Kleen c6b44d10f2 [PATCH] Implement ioctl emulation for the parport character device
Fixes bugzilla.kernel.org bug 2903.

Cc: <tim@cyberelk.net>
Cc: <andrea@suse.de>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12 09:08:49 -08:00
Andi Kleen 2966387b48 [PATCH] x86_64: Implement compat code for sg driver SG_GET_REQUEST_TABLE ioctl
Apparently helps with some non SANE scanner drivers.

Cc: axboe@suse.de

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 19:04:53 -08:00
Randy Dunlap 16f7e0fe2e [PATCH] capable/capability.h (fs/)
fs: Use <linux/capability.h> where capable() is used.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 18:42:13 -08:00
Christoph Hellwig e6a6d2efcb [PATCH] sanitize building of fs/compat_ioctl.c
Now that all these entries in the arch ioctl32.c files are gone [1], we can
build fs/compat_ioctl.c as a normal object and kill tons of cruft.  We need a
special do_ioctl32_pointer handler for s390 so the compat_ptr call is done.
This is not needed but harmless on all other architectures.  Also remove some
superflous includes in fs/compat_ioctl.c

Tested on ppc64.

[1] parisc still had it's PPP handler left, which is not fully correct
    for ppp and besides that ppp uses the generic SIOCPRIV ioctl so it'd
    kick in for all netdevice users.  We can introduce a proper handler
    in one of the next patch series by adding a compat_ioctl method to
    struct net_device but for now let's just kill it - parisc doesn't
    compile in mainline anyway and I don't want this to block this
    patchset.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@debian.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 08:01:33 -08:00
Christoph Hellwig ec3cad9690 [PATCH] move rtc compat ioctl handling to fs/compat_ioctl.c
This patch implements generic handling of RTC_IRQP_READ32, RTC_IRQP_SET32,
RTC_EPOCH_READ32 and RTC_EPOCH_SET32 in fs/compat_ioctl.c.  It's based on the
x86_64 code which needed a little massaging to be endian-clean.

parisc used COMPAT_IOCTL or generic w_long handlers for these whichce is wrong
and can't work because the ioctls encode sizeof(unsigned long) in their ioctl
number.  parisc also duplicated COMPAT_IOCTL entries for other rtc ioctls
which I remove in this patch, too.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Matthew Wilcox <matthew@wil.cx>
Acked-by: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 08:01:32 -08:00
Arnd Bergmann 0d0fbf8152 V4L (926_2): Moves compat32 functions from fs to v4l subsystem
This moves the 32 bit ioctl compatibility handlers for
Video4Linux into a new file and adds explicit calls to them
to each v4l device driver.

Unfortunately, there does not seem to be any code handling
the v4l2 ioctls, so quite often the code goes through two
separate conversions, first from 32 bit v4l to 64 bit v4l,
and from there to 64 bit v4l2. My patch does not change
that, so there is still much room for improvement.

Also, some drivers have additional ioctl numbers, for
which the conversion should be handled internally to
that driver.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09 15:24:57 -02:00
Alexandra Kossovsky 4909724b5d [COMPAT] net: SIOCGIFCONF data corruption
From: Alexandra Kossovsky <Alexandra.Kossovsky@oktetlabs.ru>

From http://bugzilla.kernel.org/show_bug.cgi?id=4746

There is user data corruption when using ioctl(SIOCGIFCONF) in 32-bit
application running amd64 kernel. I do not think that this problem is
exploitable, but any data corruption may lead to security problems.
Following code demonstrates the problem

#include <stdint.h>
#include <stdio.h>
#include <sys/time.h>
#include <sys/socket.h>
#include <net/if.h>
#include <sys/ioctl.h>

char buf[256];

main()
{
	int s = socket(AF_INET, SOCK_DGRAM, 0);
	struct ifconf req;
	int i;

	req.ifc_buf = buf;
	req.ifc_len = 41;

	printf("Result %d\n", ioctl(s, SIOCGIFCONF, &req));
	printf("Len %d\n", req.ifc_len);
	for (i = 41; i < 256; i++)
		if (buf[i] != 0)
			printf("Byte %d is corrupted\n", i);
}
	
Steps to reproduce:
Compile the code above into 32-bit elf and run it. You'll get
Result 0
Len 32
Byte 48 is corrupted
Byte 52 is corrupted
Byte 53 is corrupted
Byte 54 is corrupted
Byte 55 is corrupted

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-20 13:41:59 -08:00
David S. Miller bcb6ad1f5a [COMPAT]: EXT3_IOC_SETVERSION is _IOW() not _IOR().
Noticed by Helge Deller.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-18 14:50:20 -08:00
David S. Miller d5ea655376 [COMPAT]: Add ext3 ioctl translations.
So things like on-line resizing et al. work.

Based almost entirely upon a patch by Guido Gnther <agx@sigxcpu.org>

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-17 15:04:34 -08:00
David S. Miller 6e87abd0b8 [DVB]: Add compat ioctl handling.
Based upon a patch by Guido Guenther <agx@sigxcpu.org>.

Some of these ioctls had embedded time_t objects
or pointers, so needed translation.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-16 00:52:57 -08:00
Arnd Bergmann c7f82d9c49 [PATCH] fbdev: move ioctl32 code to fbmem.c
The frame buffer layer already had some code dealing with compat ioctls, this
patch moves over the remaining code from fs/compat_ioctl.c

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 07:56:36 -08:00
Christoph Hellwig 7a81e31686 [PATCH] re-add TIOCSTART and TIOCSTOP compat_ioctl handlers
We don't implement these ioctls, but some architectures define them in the
headers.  Bash picks them up and issues them frequently.  Add compat_ioctl
handlers to silence warnings about unhandled copat ioctls.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 07:56:00 -08:00
Jesper Juhl f99d49adf5 [PATCH] kfree cleanup: fs
This is the fs/ part of the big kfree cleanup patch.

Remove pointless checks for NULL prior to calling kfree() in fs/.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:54:06 -08:00
Christoph Hellwig 9c0cbd54ce [PATCH] TIOC* compat ioctl handling
TIOCSTART and TIOCSTOP are defined in asm/ioctls.h and asm/termios.h by
various architectures but not actually implemented anywhere but in the IRIX
compatibility layer, so remove their COMPATIBLE_IOCTL from parisc, ppc64
and sparc64.

Move the TIOCSLTC COMPATIBLE_IOCTL to common code, guided by an ifdef to
only show up on architectures that support it (same as the code handling it
in tty_ioctl.c), aswell as it's brother TIOCGLTC that wasn't handled so
far.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:17 -08:00
Pete Zaitcev c36fc889b5 [PATCH] usb: Patch for USBDEVFS_IOCTL from 32-bit programs
Dell supplied me with the following test:

#include<stdio.h>
#include<errno.h>
#include<sys/ioctl.h>
#include<fcntl.h>
#include<linux/usbdevice_fs.h>

main(int argc,char*argv[])
{
   struct usbdevfs_hub_portinfo hubPortInfo = {0};
   struct usbdevfs_ioctl command = {0};
   command.ifno = 0;
   command.ioctl_code = USBDEVFS_HUB_PORTINFO;
   command.data = (void*)&hubPortInfo;
   int fd, ret;
   if(argc != 2) {
     fprintf(stderr,"Usage: %s /proc/bus/usb/<BusNo>/<HubID>\n",argv[0]);
     fprintf(stderr,"Example: %s /proc/bus/usb/001/001\n",argv[0]);
     exit(1);
   }
   errno = 0;
   fd = open(argv[1],O_RDWR);
   if(fd < 0) {
     perror("open failed:");
     exit(errno);
   }
   errno = 0;
   ret = ioctl(fd,USBDEVFS_IOCTL,&command);
   printf("IOCTL return status:%d\n",ret);
   if(ret<0) {
     perror("IOCTL failed:");
     close(fd);
     exit(3);
   } else {
       printf("IOCTL passed:Num of ports %d\n",hubPortInfo.nports);
       close(fd);
       exit(0);
   }
   return 0;
}

I have verified that it breaks if built in 32 bit mode on x86_64 and that
the patch below fixes it.

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 16:47:46 -07:00
Kirill Korotaev d99901d6fd [PATCH] Lost sockfd_put() in routing_ioctl()
This patch adds lost sockfd_put() in 32bit compat rounting_ioctl() on
64bit platforms

Signed-Off-By: Kirill Korotaev <dev@sw.ru>
Signed-Off-By: Maxim Giryaev <gem@sw.ru>
Signed-off-By: Linus Torvalds <torvalds@osdl.org>
2005-09-09 14:24:05 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00