- vDSO build improvements including support for building with BSD.
- Cleanup to the AMU support code and initialisation rework to support
cpufreq drivers built as modules.
- Removal of synthetic frame record from exception stack when entering
the kernel from EL0.
- Add support for the TRNG firmware call introduced by Arm spec
DEN0098.
- Cleanup and refactoring across the board.
- Avoid calling arch_get_random_seed_long() from
add_interrupt_randomness()
- Perf and PMU updates including support for Cortex-A78 and the v8.3
SPE extensions.
- Significant steps along the road to leaving the MMU enabled during
kexec relocation.
- Faultaround changes to initialise prefaulted PTEs as 'old' when
hardware access-flag updates are supported, which drastically
improves vmscan performance.
- CPU errata updates for Cortex-A76 (#1463225) and Cortex-A55
(#1024718)
- Preparatory work for yielding the vector unit at a finer granularity
in the crypto code, which in turn will one day allow us to defer
softirq processing when it is in use.
- Support for overriding CPU ID register fields on the command-line.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmAmwZcQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNLA1B/0XMwWUhmJ4ZPK4sr28YWHNGLuCFHDgkMKU
dEmS806OF9d0J7fTczGsKdS4IKtXWko67Z0UGiPIStwfm0itSW2Zgbo9KZeDPqPI
fH0s23nQKxUMyNW7b9p4cTV3YuGVMZSBoMug2jU2DEDpSqeGBk09NPi6inERBCz/
qZxcqXTKxXbtOY56eJmq09UlFZiwfONubzuCrrUH7LU8ZBSInM/6Q4us/oVm4zYI
Pnv996mtL4UxRqq/KoU9+cQ1zsI01kt9/coHwfCYvSpZEVAnTWtfECsJ690tr3mF
TSKQLvOzxbDtU+HcbkNVKW0A38EIO1xXr8yXW9SJx6BJBkyb24xo
=IwMb
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
- vDSO build improvements including support for building with BSD.
- Cleanup to the AMU support code and initialisation rework to support
cpufreq drivers built as modules.
- Removal of synthetic frame record from exception stack when entering
the kernel from EL0.
- Add support for the TRNG firmware call introduced by Arm spec
DEN0098.
- Cleanup and refactoring across the board.
- Avoid calling arch_get_random_seed_long() from
add_interrupt_randomness()
- Perf and PMU updates including support for Cortex-A78 and the v8.3
SPE extensions.
- Significant steps along the road to leaving the MMU enabled during
kexec relocation.
- Faultaround changes to initialise prefaulted PTEs as 'old' when
hardware access-flag updates are supported, which drastically
improves vmscan performance.
- CPU errata updates for Cortex-A76 (#1463225) and Cortex-A55
(#1024718)
- Preparatory work for yielding the vector unit at a finer granularity
in the crypto code, which in turn will one day allow us to defer
softirq processing when it is in use.
- Support for overriding CPU ID register fields on the command-line.
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (85 commits)
drivers/perf: Replace spin_lock_irqsave to spin_lock
mm: filemap: Fix microblaze build failure with 'mmu_defconfig'
arm64: Make CPU_BIG_ENDIAN depend on ld.bfd or ld.lld 13.0.0+
arm64: cpufeatures: Allow disabling of Pointer Auth from the command-line
arm64: Defer enabling pointer authentication on boot core
arm64: cpufeatures: Allow disabling of BTI from the command-line
arm64: Move "nokaslr" over to the early cpufeature infrastructure
KVM: arm64: Document HVC_VHE_RESTART stub hypercall
arm64: Make kvm-arm.mode={nvhe, protected} an alias of id_aa64mmfr1.vh=0
arm64: Add an aliasing facility for the idreg override
arm64: Honor VHE being disabled from the command-line
arm64: Allow ID_AA64MMFR1_EL1.VH to be overridden from the command line
arm64: cpufeature: Add an early command-line cpufeature override facility
arm64: Extract early FDT mapping from kaslr_early_init()
arm64: cpufeature: Use IDreg override in __read_sysreg_by_encoding()
arm64: cpufeature: Add global feature override facility
arm64: Move SCTLR_EL1 initialisation to EL-agnostic code
arm64: Simplify init_el2_state to be non-VHE only
arm64: Move VHE-specific SPE setup to mutate_to_vhe()
arm64: Drop early setting of MDSCR_EL2.TPMS
...
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYCu8dgAKCRCAXGG7T9hj
vuxTAP0S1iJ6DR5Y2pdSy2dfxn/gItNqUlR7vbFdxgf/mBSNxAD/fxbtVWM1GuTs
3Fwz0T60BcxsHZXhDcPAA2cjoqORbQs=
=2b0M
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.12-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
"A series of Xen related security fixes, all related to limited error
handling in Xen backend drivers"
* tag 'for-linus-5.12-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen-blkback: fix error handling in xen_blkbk_map()
xen-scsiback: don't "handle" error by BUG()
xen-netback: don't "handle" error by BUG()
xen-blkback: don't "handle" error by BUG()
xen/arm: don't ignore return errors from set_phys_to_machine
Xen/gntdev: correct error checking in gntdev_map_grant_pages()
Xen/gntdev: correct dev_bus_addr handling in gntdev_map_grant_pages()
Xen/x86: also check kernel mapping in set_foreign_p2m_mapping()
Xen/x86: don't bail early from clear_foreign_p2m_mapping()
- The usual new irq chip driver (Realtek RTL83xx)
- Removal of sirfsoc and tango irq chip drivers
- Conversion of the sun6i chip support to hierarchical irq domains
- The usual fixes, improvements and cleanups all over the place
-----BEGIN PGP SIGNATURE-----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=rM8s
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2021-02-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for the irq subsystem:
- The usual new irq chip driver (Realtek RTL83xx)
- Removal of sirfsoc and tango irq chip drivers
- Conversion of the sun6i chip support to hierarchical irq domains
- The usual fixes, improvements and cleanups all over the place"
* tag 'irq-core-2021-02-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/imx: IMX_INTMUX should not default to y, unconditionally
irqchip/loongson-pch-msi: Use bitmap_zalloc() to allocate bitmap
irqchip/csky-mpintc: Prevent selection on unsupported platforms
irqchip: Add support for Realtek RTL838x/RTL839x interrupt controller
dt-bindings: interrupt-controller: Add Realtek RTL838x/RTL839x support
irqchip/ls-extirq: add IRQCHIP_SKIP_SET_WAKE to the irqchip flags
genirq: Use new tasklet API for resend_tasklet
dt-bindings: qcom,pdc: Add compatible for SM8350
dt-bindings: qcom,pdc: Add compatible for SM8250
irqchip/sun6i-r: Add wakeup support
irqchip/sun6i-r: Use a stacked irqchip driver
dt-bindings: irq: sun6i-r: Add a compatible for the H3
dt-bindings: irq: sun6i-r: Split the binding from sun7i-nmi
irqchip/gic-v3: Fix typos in PMR/RPR SCR_EL3.FIQ handling explanation
irqchip: Remove sirfsoc driver
irqchip: Remove sigma tango driver
The "oprofile" user-space tools don't use the kernel OPROFILE support any more,
and haven't in a long time. User-space has been converted to the perf
interfaces.
The dcookies stuff is only used by the oprofile code. Now that oprofile's
support is getting removed from the kernel, there is no need for dcookies as
well.
Remove kernel's old oprofile and dcookies support.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=I2Ac
-----END PGP SIGNATURE-----
Merge tag 'oprofile-removal-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/linux
Pull oprofile and dcookies removal from Viresh Kumar:
"Remove oprofile and dcookies support
The 'oprofile' user-space tools don't use the kernel OPROFILE support
any more, and haven't in a long time. User-space has been converted to
the perf interfaces.
The dcookies stuff is only used by the oprofile code. Now that
oprofile's support is getting removed from the kernel, there is no
need for dcookies as well.
Remove kernel's old oprofile and dcookies support"
* tag 'oprofile-removal-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/linux:
fs: Remove dcookies support
drivers: Remove CONFIG_OPROFILE support
arch: xtensa: Remove CONFIG_OPROFILE support
arch: x86: Remove CONFIG_OPROFILE support
arch: sparc: Remove CONFIG_OPROFILE support
arch: sh: Remove CONFIG_OPROFILE support
arch: s390: Remove CONFIG_OPROFILE support
arch: powerpc: Remove oprofile
arch: powerpc: Stop building and using oprofile
arch: parisc: Remove CONFIG_OPROFILE support
arch: mips: Remove CONFIG_OPROFILE support
arch: microblaze: Remove CONFIG_OPROFILE support
arch: ia64: Remove rest of perfmon support
arch: ia64: Remove CONFIG_OPROFILE support
arch: hexagon: Don't select HAVE_OPROFILE
arch: arc: Remove CONFIG_OPROFILE support
arch: arm: Remove CONFIG_OPROFILE support
arch: alpha: Remove CONFIG_OPROFILE support
Here is the big set of USB and Thunderbolt driver changes for 5.12-rc1.
It's been an active set of development in these subsystems for the past
few months:
- loads of typec features added for new hardware
- xhci features and bugfixes
- dwc3 features added for more hardware support
- dwc2 fixes and new hardware support
- cdns3 driver updates for more hardware support
- gadget driver cleanups and minor fixes
- usb-serial fixes, new driver, and more devices supported
- thunderbolt feature additions for new hardware
- lots of other tiny fixups and additions
The chrome driver changes are in here as well, as they depended on some
of the typec changes, and the maintainer acked them.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYCqf5Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykZhQCgoDMMu9YZZI8chWVlIbDYiHxG520An1SlbwDb
hRh87fsQFkwWk06Bp9AQ
=LmS1
-----END PGP SIGNATURE-----
Merge tag 'usb-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB and Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for
5.12-rc1.
It's been an active set of development in these subsystems for the
past few months:
- loads of typec features added for new hardware
- xhci features and bugfixes
- dwc3 features added for more hardware support
- dwc2 fixes and new hardware support
- cdns3 driver updates for more hardware support
- gadget driver cleanups and minor fixes
- usb-serial fixes, new driver, and more devices supported
- thunderbolt feature additions for new hardware
- lots of other tiny fixups and additions
The chrome driver changes are in here as well, as they depended on
some of the typec changes, and the maintainer acked them.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (300 commits)
dt-bindings: usb: mediatek: musb: add mt8516 compatbile
dt-bindings: usb: mtk-xhci: add compatible for mt2701 and mt7623
dt-bindings: usb: mtk-xhci: add optional assigned clock properties
Documentation: connector: Update the description of sink-vdos
usb: misc: usb3503: Fix logic in usb3503_init()
dt-bindings: usb: usb-device: fix typo in required properties
usb: Replace lkml.org links with lore
dt-bindings: usb: dwc3: add description for rk3328
dt-bindings: usb: convert rockchip,dwc3.txt to yaml
usb: quirks: add quirk to start video capture on ELMO L-12F document camera reliable
USB: quirks: sort quirk entries
USB: serial: drop bogus to_usb_serial_port() checks
USB: serial: make remove callback return void
USB: serial: drop if with an always false condition
usb: gadget: Assign boolean values to a bool variable
usb: typec: tcpm: Get Sink VDO from fwnode
dt-bindings: connector: Add SVDM VDO properties
usb: typec: displayport: Fill the negotiated SVDM Version in the header
usb: typec: ucsi: Determine common SVDM Version
usb: typec: tcpm: Determine common SVDM Version
...
As usual, a number of additional device drivers that were added
to the kernel are now enabled in the respective configuration
files. A few of the files get updated to match the current
Kconfig files for removed or renamed options.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=9G1K
-----END PGP SIGNATURE-----
Merge tag 'arm-defconfig-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Arnd Bergmann:
"As usual, a number of additional device drivers that were added to the
kernel are now enabled in the respective configuration files.
A few of the files get updated to match the current Kconfig files for
removed or renamed options"
* tag 'arm-defconfig-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (50 commits)
ARM: configs: sama5_defconfig: add QSPI driver
ARM: configs: at91_dt_defconfig: add ov7740 module
ARM: configs: at91_dt_defconfig: add useful helper options
ARM: configs: at91: DT/ATAG defconfig modifications
ARM: configs: sama5_defconfig: update and remove unneeded options
ARM: configs: at91: enable drivers for sam9x60
arm64: defconfig: Enable RT5659
arm64: configs: Support DEVAPC on MediaTek platforms
arm64: configs: Support pwrap on Mediatek MT6779 platform
arm64: defconfig: Enable PF8x00 as builtin
ARM: multi_v7_defconfig: add STM32 CEC support
arm64: defconfig: Enable vibra-pwm
ARM: omap2plus_defconfig: Update for dropped options
ARM: omap2plus_defconfig: Update for moved options
ARM: multi_v7_defconfig: Enable nvmem's rmem driver
arm64: defconfig: Enable nvmem's rmem driver
ARM: multi_v7_defconfig: Enable support for the ADC thermal sensor
ARM: qcom_defconfig: Enable Command DB driver
ARM: qcom_defconfig: Enable RPMh power domain driver
ARM: qcom_defconfig: Enable ARM PSCI support
...
This is mostly 32-bit code for SoC platforms, and looks smaller
than any such branch I remember from previous kernels, as most
of this is now handled in other subsystems for modern platforms:
- Minor bugfixes and Kconfig updates for Tegra, Broadcom, i.MX,
Renesas, and Samsung
- Updates to the MAINTAINERS listing for Actions, OMAP, and Samsung
- Samsung SoC driver updates to make them loadable modules
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=2ehx
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Arnd Bergmann:
"This is mostly 32-bit code for SoC platforms, and looks smaller than
any such branch I remember from previous kernels, as most of this is
now handled in other subsystems for modern platforms:
- Minor bugfixes and Kconfig updates for Tegra, Broadcom, i.MX,
Renesas, and Samsung
- Updates to the MAINTAINERS listing for Actions, OMAP, and Samsung
- Samsung SoC driver updates to make them loadable modules"
* tag 'arm-soc-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: arm: samsung: include S3C headers in platform entry
MAINTAINERS: Add linux-actions ML for Actions Semi Arch
ARM: s3c: irq-s3c24xx: staticize local functions
ARM: s3c: irq-s3c24xx: include headers for missing declarations
ARM: s3c: fix fiq for clang IAS
ARM: imx: Remove unused IMX_GPIO_NR() macro
soc: renesas: rcar-sysc: Mark device node OF_POPULATED after init
ARM: OMAP2+: fix spellint typo
MAINTAINERS: Update address for OMAP GPMC driver
soc: renesas: rcar-sysc: Use readl_poll_timeout_atomic()
ARM: bcm: Select BRCMSTB_L2_IRQ for bcm2835
ARM: brcmstb: Add debug UART entry for 72116
ARM: tegra: Don't enable unused PLLs on resume from suspend
soc: samsung: pm_domains: Convert to regular platform driver
soc: samsung: exynos-chipid: correct helpers __init annotation
ARM: mach-imx: imx6ul: Print SOC revision on boot
ARM: imx: mach-imx6ul: remove 14x14 EVK specific PHY fixup
soc: samsung: exynos-chipid: convert to driver and merge exynos-asv
soc: samsung: exynos-asv: handle reading revision register error
soc: samsung: exynos-asv: don't defer early on not-supported SoCs
There are a lot of platforms that have not seen any interesting code
changes in the past five years or more.
I made a list and asked around which ones are no longer in use [1], and
received confirmation about six ARM platforms and the TI C6x architecture
that have all reached the end of their life upstream, with no known
users remaining:
- efm32 -- added in 2011, first Cortex-M, no notable changes after 2013
- picoxcell -- added in 2011, abandoned after 2012 acquisition
- prima2 -- added in 20111, no notable changes since 2015
- tango -- added in 2015, sporadic changes until 2017, but abandoned
- u300 -- added in 2009, no notable changes since 2013
- zx --added in 2015 for both 32, 2017 for 64 bit, no notable changes
- arch/c6x -- added in 2011, but work stalled soon after that
A number of other platforms on the original list turned out to still
have users. In some cases there are out-of-tree patches and users
that plan to contribute them in the future, in other cases the code
is complete and works reliably.
[1] https://lore.kernel.org/lkml/CAK8P3a2DZ8xQp7R=H=wewHnT2=a_=M53QsZOueMVEf7tOZLKNg@mail.gmail.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=pf3b
-----END PGP SIGNATURE-----
Merge tag 'arm-platform-removal-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC platform removals from Arnd Bergmann:
"There are a lot of platforms that have not seen any interesting code
changes in the past five years or more.
I made a list and asked around which ones are no longer in use, and
received confirmation about six ARM platforms and the TI C6x
architecture that have all reached the end of their life upstream,
with no known users remaining:
- efm32 - added in 2011, first Cortex-M, no notable changes after 2013
- picoxcell - added in 2011, abandoned after 2012 acquisition
- prima2 - added in 20111, no notable changes since 2015
- tango - added in 2015, sporadic changes until 2017, but abandoned
- u300 - added in 2009, no notable changes since 2013
- zx - added in 2015 for both 32, 2017 for 64 bit, no notable changes
- arch/c6x - added in 2011, but work stalled soon after that
A number of other platforms on the original list turned out to still
have users. In some cases there are out-of-tree patches and users that
plan to contribute them in the future, in other cases the code is
complete and works reliably"
Link: https://lore.kernel.org/lkml/CAK8P3a2DZ8xQp7R=H=wewHnT2=a_=M53QsZOueMVEf7tOZLKNg@mail.gmail.com/
* tag 'arm-platform-removal-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: remove u300 platform
ARM: remove tango platform
ARM: remove zte zx platform
ARM: remove sirf prima2/atlas platforms
c6x: remove architecture
MAINTAINERS: Remove deleted platform efm32
ARM: drop efm32 platform
ARM: Remove PicoXcell platform support
ARM: dts: Remove PicoXcell platforms
There are only two remaining non-urgent ARM SoC bug fixes that
could still apply for v5.11, or for the v5.12 merge window:
- A build fix for the Atmel SAM9 platform to allow building
with the clang integrated assembler
- A DT fix for ethernet on Intel SoCFPGA, this has been broken
since it was added in v5.4.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=/6ia
-----END PGP SIGNATURE-----
Merge tag 'arm-fixes-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There are only two left-over remaining non-urgent ARM SoC bug fixes:
- A build fix for the Atmel SAM9 platform to allow building with the
clang integrated assembler
- A DT fix for ethernet on Intel SoCFPGA, this has been broken since
it was added in v5.4"
* tag 'arm-fixes-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: at91: use proper asm syntax in pm_suspend
arm64: dts: agilex: fix phy interface bit shift for gmac1 and gmac2
Pull networking updates from David Miller:
"Here is what we have this merge window:
1) Support SW steering for mlx5 Connect-X6Dx, from Yevgeny Kliteynik.
2) Add RSS multi group support to octeontx2-pf driver, from Geetha
Sowjanya.
3) Add support for KS8851 PHY. From Marek Vasut.
4) Add support for GarfieldPeak bluetooth controller from Kiran K.
5) Add support for half-duplex tcan4x5x can controllers.
6) Add batch skb rx processing to bcrm63xx_enet, from Sieng Piaw
Liew.
7) Rework RX port offload infrastructure, particularly wrt, UDP
tunneling, from Jakub Kicinski.
8) Add BCM72116 PHY support, from Florian Fainelli.
9) Remove Dsa specific notifiers, they are unnecessary. From Vladimir
Oltean.
10) Add support for picosecond rx delay in dwmac-meson8b chips. From
Martin Blumenstingl.
11) Support TSO on xfrm interfaces from Eyal Birger.
12) Add support for MP_PRIO to mptcp stack, from Geliang Tang.
13) Support BCM4908 integrated switch, from Rafał Miłecki.
14) Support for directly accessing kernel module variables via module
BTF info, from Andrii Naryiko.
15) Add DASH (esktop and mobile Architecture for System Hardware)
support to r8169 driver, from Heiner Kallweit.
16) Add rx vlan filtering to dpaa2-eth, from Ionut-robert Aron.
17) Add support for 100 base0x SFP devices, from Bjarni Jonasson.
18) Support link aggregation in DSA, from Tobias Waldekranz.
19) Support for bitwidse atomics in bpf, from Brendan Jackman.
20) SmartEEE support in at803x driver, from Russell King.
21) Add support for flow based tunneling to GTP, from Pravin B Shelar.
22) Allow arbitrary number of interconnrcts in ipa, from Alex Elder.
23) TLS RX offload for bonding, from Tariq Toukan.
24) RX decap offklload support in mac80211, from Felix Fietkou.
25) devlink health saupport in octeontx2-af, from George Cherian.
26) Add TTL attr to SCM_TIMESTAMP_OPT_STATS, from Yousuk Seung
27) Delegated actionss support in mptcp, from Paolo Abeni.
28) Support receive timestamping when doin zerocopy tcp receive. From
Arjun Ray.
29) HTB offload support for mlx5, from Maxim Mikityanskiy.
30) UDP GRO forwarding, from Maxim Mikityanskiy.
31) TAPRIO offloading in dsa hellcreek driver, from Kurt Kanzenbach.
32) Weighted random twos choice algorithm for ipvs, from Darby Payne.
33) Fix netdev registration deadlock, from Johannes Berg.
34) Various conversions to new tasklet api, from EmilRenner Berthing.
35) Bulk skb allocations in veth, from Lorenzo Bianconi.
36) New ethtool interface for lane setting, from Danielle Ratson.
37) Offload failiure notifications for routes, from Amit Cohen.
38) BCM4908 support, from Rafał Miłecki.
39) Support several new iwlwifi chips, from Ihab Zhaika.
40) Flow drector support for ipv6 in i40e, from Przemyslaw Patynowski.
41) Support for mhi prrotocols, from Loic Poulain.
42) Optimize bpf program stats.
43) Implement RFC6056, for better port randomization, from Eric
Dumazet.
44) hsr tag offloading support from George McCollister.
45) Netpoll support in qede, from Bhaskar Upadhaya.
46) 2005/400g speed support in bonding 3ad mode, from Nikolay
Aleksandrov.
47) Netlink event support in mptcp, from Florian Westphal.
48) Better skbuff caching, from Alexander Lobakin.
49) MRP (Media Redundancy Protocol) offloading in DSA and a few
drivers, from Horatiu Vultur.
50) mqprio saupport in mvneta, from Maxime Chevallier.
51) Remove of_phy_attach, no longer needed, from Florian Fainelli"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1766 commits)
octeontx2-pf: Fix otx2_get_fecparam()
cteontx2-pf: cn10k: Prevent harmless double shift bugs
net: stmmac: Add PCI bus info to ethtool driver query output
ptp: ptp_clockmatrix: clean-up - parenthesis around a == b are unnecessary
ptp: ptp_clockmatrix: Simplify code - remove unnecessary `err` variable.
ptp: ptp_clockmatrix: Coding style - tighten vertical spacing.
ptp: ptp_clockmatrix: Clean-up dev_*() messages.
ptp: ptp_clockmatrix: Remove unused header declarations.
ptp: ptp_clockmatrix: Add alignment of 1 PPS to idtcm_perout_enable.
ptp: ptp_clockmatrix: Add wait_for_sys_apll_dpll_lock.
net: stmmac: dwmac-sun8i: Add a shutdown callback
net: stmmac: dwmac-sun8i: Minor probe function cleanup
net: stmmac: dwmac-sun8i: Use reset_control_reset
net: stmmac: dwmac-sun8i: Remove unnecessary PHY power check
net: stmmac: dwmac-sun8i: Return void from PHY unpower
r8169: use macro pm_ptr
net: mdio: Remove of_phy_attach()
net: mscc: ocelot: select PACKING in the Kconfig
net: re-solve some conflicts after net -> net-next merge
net: dsa: tag_rtl4_a: Support also egress tags
...
As Dave reported:
This seems to have unintended side effects. GIC interrupt 117 is shared
between the standard I2C controllers (i2c-bcm2835) and the l2-intc block
handling the HDMI I2C interrupts.
There is not a great way to share an interrupt between an interrupt
controller using the chained IRQ handler which is an interrupt flow and
another driver like i2c-bcm2835 which uses an interrupt handler
(although it specifies IRQF_SHARED).
Simply revert this change for now which will mean that HDMI I2C will be
polled, like it was before.
Reported-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
set_phys_to_machine can fail due to lack of memory, see the kzalloc call
in arch/arm/xen/p2m.c:__set_phys_to_machine_multi.
Don't ignore the potential return error in set_foreign_p2m_mapping,
returning it to the caller instead.
This is part of XSA-361.
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Cc: stable@vger.kernel.org
Reviewed-by: Julien Grall <jgrall@amazon.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
When I dropped legacy data for omap4 and dra7 smartreflex in favor of
device tree based data, it seems I only testd for the "SmartReflex Class3
initialized" line in dmesg. I missed the fact that there is also
omap_devinit_smartreflex() that happens later, and now it produces an
error on boot for "No Voltage table for the corresponding vdd. Cannot
create debugfs entries for n-values".
This happens as we no longer have the smartreflex instance legacy data,
and have not yet moved completely to device tree based booting for the
driver. Let's fix the issue by changing the smartreflex init to use names.
This should all eventually go away in favor of doing the init in the
driver based on devicetree compatible value.
Note that dra7xx_init_early() is not calling any voltage domain init like
omap54xx_voltagedomains_init(), or a dra7 specific voltagedomains init.
This means that on dra7 smartreflex is still not fully initialized, and
also seems to be missing the related devicetree nodes.
Fixes: a6b1e717e9 ("ARM: OMAP2+: Drop legacy platform data for omap4 smartreflex")
Fixes: e54740b4af ("ARM: OMAP2+: Drop legacy platform data for dra7 smartreflex")
Signed-off-by: Tony Lindgren <tony@atomide.com>
The PCA95xx GPIO expander requires GPIO controller properties to operate
properly.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210212162640.66677-1-krzk@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYCUrYAAKCRCAXGG7T9hj
voF2AP9x3wKo+kYAqlRQrrDBb/AoMezoJ3pFiqJ+1Lg4yK4N6AD+IQxHuIODBfgj
bK12hr5oE6S3e7tTaVWweWzys5UmWA4=
=zleO
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.11-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"A single fix for an issue introduced this development cycle: when
running as a Xen guest on Arm systems the kernel will hang during
boot"
* tag 'for-linus-5.11-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
arm/xen: Don't probe xenbus as part of an early initcall
Fixes the following W=1 kernel build warning(s):
drivers/clk/spear/spear1310_clock.c:385:13: warning: no previous prototype for ‘spear1310_clk_init’ [-Wmissing-prototypes]
drivers/clk/spear/spear1340_clock.c:442:13: warning: no previous prototype for ‘spear1340_clk_init’ [-Wmissing-prototypes]
Cc: Viresh Kumar <vireshk@kernel.org>
Cc: Shiraz Hashim <shiraz.linux.kernel@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210126124540.3320214-20-lee.jones@linaro.org
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Three fixes for S3C24xx: one for building with clang and two for
warnings.
-----BEGIN PGP SIGNATURE-----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=ft1H
-----END PGP SIGNATURE-----
Merge tag 'samsung-soc-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/soc
Samsung mach/soc changes for v5.12
Three fixes for S3C24xx: one for building with clang and two for
warnings.
* tag 'samsung-soc-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: s3c: irq-s3c24xx: staticize local functions
ARM: s3c: irq-s3c24xx: include headers for missing declarations
ARM: s3c: fix fiq for clang IAS
Link: https://lore.kernel.org/r/20210211082254.7934-1-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- New machines
* Ampere Mt. Jade, an AST2500 BMC for an x86 server
* IBM Everest, an AST2600 BMC for a Power10 server
* Supermicro x11spi, an AST2500 BMC for an ARM server
- AST2600 eMMC clock phase configuration
- Proper clock support for LPC snoop
- Misc updates to ethanolx, mowgli, ast2600evb, g220a, and rainier
-----BEGIN PGP SIGNATURE-----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=mVi5
-----END PGP SIGNATURE-----
Merge tag 'aspeed-5.12-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dt
ASPEED device tree updates for 5.12
- New machines
* Ampere Mt. Jade, an AST2500 BMC for an x86 server
* IBM Everest, an AST2600 BMC for a Power10 server
* Supermicro x11spi, an AST2500 BMC for an ARM server
- AST2600 eMMC clock phase configuration
- Proper clock support for LPC snoop
- Misc updates to ethanolx, mowgli, ast2600evb, g220a, and rainier
* tag 'aspeed-5.12-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
ARM: dts: aspeed: ast2600evb: Add enable ehci and uhci
ARM: dts: aspeed: mowgli: Add i2c rtc device
ARM: dts: aspeed: amd-ethanolx: Enable secondary LPC snooping address
ARM: dts: aspeed: Add Everest BMC machine
ARM: dts: aspeed: inspur-fp5280g2: Add ipsps1 driver
ARM: dts: aspeed: inspur-fp5280g2: Add GPIO line names
ARM: dts: aspeed: Add Supermicro x11spi BMC machine
ARM: dts: aspeed: g220a: Fix some gpio
ARM: dts: aspeed: g220a: Enable ipmb
ARM: dts: aspeed: rainier: Add eMMC clock phase compensation
ARM: dts: aspeed: Add LCLK to lpc-snoop
ARM: dts: aspeed: Add device tree for Ampere's Mt. Jade BMC
Link: https://lore.kernel.org/r/CACPK8XfQgGch5bK3YD0La+CE2L5DxVa1MNw6m1fc40j0w7e9Tw@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
After Commit 3499ba8198 ("xen: Fix event channel callback via
INTX/GSI"), xenbus_probe() will be called too early on Arm. This will
recent to a guest hang during boot.
If the hang wasn't there, we would have ended up to call
xenbus_probe() twice (the second time is in xenbus_probe_initcall()).
We don't need to initialize xenbus_probe() early for Arm guest.
Therefore, the call in xen_guest_init() is now removed.
After this change, there is no more external caller for xenbus_probe().
So the function is turned to a static one. Interestingly there were two
prototypes for it.
Cc: stable@vger.kernel.org
Fixes: 3499ba8198 ("xen: Fix event channel callback via INTX/GSI")
Reported-by: Ian Jackson <iwj@xenproject.org>
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/20210210170654.5377-1-julien@xen.org
Signed-off-by: Juergen Gross <jgross@suse.com>
AMD EthanolX CRB uses 2-byte POST codes which are sent to ports 0x80/0x81.
Currently ASPEED controller snoops only 0x80 port and therefore captures
only the lower byte of each POST code.
Enable secondary LPC snooping address to capture the higher byte of POST
codes.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20210127182326.424-1-aladyshev22@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add the pinctrl entries for the GPIOs which are connected to the
push buttons on this board.
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20210201133000.23402-1-michael@walle.cc
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
The Ebang EBAZ4205 is a simple board based on the Xilinx Zynq-7000 SoC.
Its features are:
- one serial port
- 256 MB RAM
- 128 MB NAND flash
- SDcard slot
- IP101GA 10/100 Mbit Ethernet PHY (connected to PL IOs)
- two LEDs (connected to PL IOs)
- one Push Button (connect to PL IOs)
- (optional) RTC
- (optional) Input voltage supervisor
The NAND flash is not supported in mainline linux yet. Unfortunately,
the PHY is connected via the PL, thus for working ethernet the FPGA has
to be configured. Also, depending on the board variant, the PHY has no
external crystal and its clock needs to be driven by the PL. FCLK3 is
used for this and is kept enabled.
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20210120194033.26970-4-michael@walle.cc
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
- Drop unused IMX_GPIO_NR() macro.
- Remove KSZ8081 PHY fixup from i.MX6UL machine code, because it only
applies for KSZ8081RNA with 50MHz clock source, but breaks other
KSZ8081 PHY configurations.
- Add a print of CPU type and SOC revision for i.MX6UL during boot.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmAbjkQUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM5fwwf/VZi4JPxGBFcWc9WNxLtinhUzHh5+
2Hf5lscV1s5/a4gO+W452A3aigcOOEWF+31NuWkhE7SGRaTSVm29lCFsy0jZl7y/
U3eFVytSoaj44IpKmDoVctMDELZeT1uP3T1ILc8lYL9xSUY7+S+qM+Y/mzPKx+kx
fovmaQVg5eagyeQC+6WHAkbA5+9sM1Kco6X/6Ji2TJ1JDNkl8kE2DLlrXsNz3pj2
ppFGQKbDKX5PkrGIftBZtLTDshtlGS/eYFBiVMwCqp7qGPzVPPWsH6EXtQiCoe36
A3oKlaUN30uhRiin3s+W++mNI3i5zpyQYgfZNHsgerjoPNBA5tt2PnqmuA==
=m0hr
-----END PGP SIGNATURE-----
Merge tag 'imx-soc-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/soc
i.MX SoC update for 5.12:
- Drop unused IMX_GPIO_NR() macro.
- Remove KSZ8081 PHY fixup from i.MX6UL machine code, because it only
applies for KSZ8081RNA with 50MHz clock source, but breaks other
KSZ8081 PHY configurations.
- Add a print of CPU type and SOC revision for i.MX6UL during boot.
* tag 'imx-soc-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx: Remove unused IMX_GPIO_NR() macro
ARM: mach-imx: imx6ul: Print SOC revision on boot
ARM: imx: mach-imx6ul: remove 14x14 EVK specific PHY fixup
Link: https://lore.kernel.org/r/20210204120150.26186-2-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
addition of nand flash controller odes to rk3036, rk2928, rv1108;
gpu node for rk3288-miqi and some cleanups to make dtbscheck happier.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmAd12kQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgSNACACtwmRhwT978S4pft7vwhtNT5/zBTv32CVr
1/Z+H0pTD1h6HTWSDEMAgXr1+4byRJj4d5I247Nr0jS7LnIPTtuD2CjDeyLoFtE4
UWpeqTTuQoRbflBoGLb12/RBxL+/MXmZKUN91fnvIbZiWhT00vuuqmtYtMvwNxUF
VLxDkRQAdKWSK35ujhOqDZyGw/r6BE4mJ0wC2LR/N8+2rriBXz8fqTdAf28ogxVR
zpz9Dk0R0yvKN1PLOPPnp7k0kZLAFPDb/JdB8ZTrNP3hNU5uv78xnhakhwaCRChq
z91ULm4E8Bkm8OxyaekESj+djI6v92TML1jWpazWzH1/uCGRH9O/
=sjtP
-----END PGP SIGNATURE-----
Merge tag 'v5.12-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
Fixed indices for mmc nodes; removal of obsolete amba bus nodes;
addition of nand flash controller odes to rk3036, rk2928, rv1108;
gpu node for rk3288-miqi and some cleanups to make dtbscheck happier.
* tag 'v5.12-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: assign a fixed index to mmc devices on rv1108 boards
ARM: dts: rockchip: assign a fixed index to mmc devices on rk322x boards
ARM: dts: rockchip: Remove bogus "amba" bus nodes
ARM: dts: rockchip: Add NFC node for RK3036 SoC
ARM: dts: rockchip: Add NFC node for RK2928 and other SoCs
ARM: dts: rockchip: Add NFC node for RV1108 SoC
ARM: dts: rockchip: rename thermal subnodes for rk3288
ARM: dts: rockchip: add QoS register compatibles for rk3288
ARM: dts: rockchip: add QoS register compatibles for rk3066/rk3188
ARM: dts: rockchip: add gpu node to rk3288-miqi
Link: https://lore.kernel.org/r/2184150.ElGaqSPkdT@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Updates to the existing S500 ARM SoC. Support has been added for CMU (Clock
Management Unit), Reset controller, DMA, Pinctrl/GPIO, MMC, I2C and SIRQ
(interrupt controller). Since the CMU support is added, the dummy fixed clock
used for the UART controller has been removed for all S500 based boards and
proper UART clock from CMU is used.
Added uSD support and I2C pinctrl configuration for Roseapplepi board based on
S500 SoC. This will make the board boot mainline with a distro from uSD card.
The I2C pinctrl config is added specifically for the PMIC which is currently
under review.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZ6VDKoFIy9ikWCeXVZ8R5v6RzvUFAmAczwYACgkQVZ8R5v6R
zvXTugf/bR50Fmvp7pjlWJsEHZbkrvFpSw7SPJ8d6oKQc5lpq+vP4SuJM9Om+MQk
ZLI7pzoOPNbSRqkklA8Mw9YbM8fZh+9pklp659mxyNwTIEKID72Cw/HB4E51gS5K
Vrv1A4V8M70guNAYVIjSaCkenSJdEVSQPqsLmu4kl8Na9yK+6JoFO226Si9d6amU
HYCz5WC3LN83wTz+XW23h1rUnZ8xZBRfsNwrZmNy8wIvbcRiKP31u70veeksrfDg
LCT5umxlMIisEgq3tY1s6KoavhQpq/0XIntD9iSL5xPiuP6QAOgXwdnwtWNsjGYZ
nldCUQof2Gme1aRL0DuuH4TLkvOjLA==
=awis
-----END PGP SIGNATURE-----
Merge tag 'actions-arm-dt-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions into arm/dt
Actions Semi ARM DT changes for v5.12:
Updates to the existing S500 ARM SoC. Support has been added for CMU (Clock
Management Unit), Reset controller, DMA, Pinctrl/GPIO, MMC, I2C and SIRQ
(interrupt controller). Since the CMU support is added, the dummy fixed clock
used for the UART controller has been removed for all S500 based boards and
proper UART clock from CMU is used.
Added uSD support and I2C pinctrl configuration for Roseapplepi board based on
S500 SoC. This will make the board boot mainline with a distro from uSD card.
The I2C pinctrl config is added specifically for the PMIC which is currently
under review.
* tag 'actions-arm-dt-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions:
arm: dts: owl-s500-roseapplepi: Add I2C pinctrl configuration
arm: dts: owl-s500-roseapplepi: Add uSD support
arm: dts: owl-s500: Add SIRQ controller
arm: dts: owl-s500: Add I2C support
arm: dts: owl-s500: Add MMC support
arm: dts: owl-s500: Add pinctrl & GPIO support
arm: dts: owl-s500: Add DMA controller
arm: dts: owl-s500: Add Reset controller
arm: dts: owl-s500: Set CMU clocks for UARTs
arm: dts: owl-s500: Add Clock Management Unit
Link: https://lore.kernel.org/r/20210205050346.GA7619@thinkpad
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- A series from Oleksij Rempel to add i.MX6 based Plymovent, Protonic
and Kverneland boards.
- A series from Andreas Kemnade to improve UART support for ebook
readers.
- A series from Fabio Estevam to update imx6ul-14x14-evk device tree for
adding GPIO expander and camera support.
- A patch set from Lucas Stach to improve ZII RDU2 support, enabling
WDOG, tuning I2C drive-strength, RMI4 and UCS1002 ALERT.
- Other small and random updates on various boards.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmAbmf8UHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM5xXwgAlGHKq/arFxIkQf0xUcJzLhJ9FcDl
CpNz77cosCXERcoVpRgTYWGk1ElnYutyNMkUzSrhXdZ80ieL5UMF/RAZYaGJO38f
NLCN5Rv5w1i4z/J8GGhqASgZ13Pized6jcEuvd8EYwVNkRX+ErcKszkmjWit42RL
cgRtdBhqAmEwshNjtki5PbFRj7YxWuC6Tsf4OUyXmm4S/+sqcaTvLuQWq/AeEzqJ
5vN1H6RFqfZR+C2vumW/Yq4bkRlFQllELcoTPPrixm2ZvvZbLs7I56HZub9yom9i
c4GCfcSgMEXjmuB3h7NmMNyPCyvSVLN3bNseYADX9PnrBzP4HFRW1IsAhg==
=DmjV
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX device tree change for 5.12:
- A series from Oleksij Rempel to add i.MX6 based Plymovent, Protonic
and Kverneland boards.
- A series from Andreas Kemnade to improve UART support for ebook
readers.
- A series from Fabio Estevam to update imx6ul-14x14-evk device tree for
adding GPIO expander and camera support.
- A patch set from Lucas Stach to improve ZII RDU2 support, enabling
WDOG, tuning I2C drive-strength, RMI4 and UCS1002 ALERT.
- Other small and random updates on various boards.
* tag 'imx-dt-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (37 commits)
ARM: dts: imx6: RDU2: adjust audio devices nomenclature
ARM: dts: imx6: RDU2: only trigger IRQ on falling edge ucs1002 ALERT pin
ARM: dts: imx6: RDU2: enable RMI4 reduced reporting
ARM: dts: imx6: RDU2: reduce i2c drive-strength
ARM: dts: imx6: rdu2: enable WDOG1
ARM: dts: imx6-sr-som: increase at8035 PHY gigabit Tw parameter
ARM: dts: imx6: add wakeup support via magic packet
firmware: imx: select SOC_BUS to fix firmware build
arm64: dts: imx8mp: Correct the gpio ranges of gpio3
ARM: dts: imx6qdl-sr-som: fix some cubox-i platforms
ARM: dts: imx: e60k02: add second uart
ARM: dts: imx6sl-tolino-shine3: correct console uart pinmux
ARM: dts: imx6sl-tolino-shine2hd: add second uart
ARM: dts: imx6sl-tolino-shine2hd: correct console uart pinmux
ARM: imx: build suspend-imx6.S with arm instruction set
ARM: dts: imx7d-flex-concentrator: fix pcf2127 reset
ARM: dts: add Kverneland TGO board
ARM: dts: add Kverneland UT1, UT1Q and UT1P
ARM: dts: imx6ul-14x14-evk: Add camera support
ARM: dts: imx6ul-14x14-evk: Describe the KSZ8081 reset
...
Link: https://lore.kernel.org/r/20210204120150.26186-4-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Introduces the Qualcomm SDX55 platform and the platform's MTP device,
with support for NAND, SDHCI and USB.
USB is enabled for IPQ4019 and the Alfa Network AP120C-AC and 8devices
Jalapeno boards are added.
Samsung Galaxy S5 gains display and GPU support.
-----BEGIN PGP SIGNATURE-----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=7Ft3
-----END PGP SIGNATURE-----
Merge tag 'qcom-dts-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM dts updates for 5.12
Introduces the Qualcomm SDX55 platform and the platform's MTP device,
with support for NAND, SDHCI and USB.
USB is enabled for IPQ4019 and the Alfa Network AP120C-AC and 8devices
Jalapeno boards are added.
Samsung Galaxy S5 gains display and GPU support.
* tag 'qcom-dts-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (38 commits)
ARM: dts: qcom: msm8974-klte: Mark essential regulators
ARM: dts: qcom: msm8974-klte: add support for display
ARM: dts: qcom: msm8974-klte: add support for GPU
ARM: dts: qcom: msm8974: add gpu support
ARM: dts: qcom: ipq4019: add SDHCI VQMMC LDO node
ARM: dts: qcom: replace status value "ok" by "okay"
ARM: dts: qcom: add additional DT labels in qcom-ipq8064.dtsi
ARM: dts: qcom: remove commented mmc-ddr-1_8v for sdcc3
ARM: dts: qcom: add Alfa Network AP120C-AC
ARM: dts: qcom: add 8devices Jalapeno
ARM: dts: qcom: ipq4019: add more labels
ARM: dts: qcom: ipq4019: add USB devicetree nodes
ARM: dts: qcom: add prng definition to ipq806x
ARM: dts: qcom: sdx55: Add pshold support
ARM: dts: qcom: sdx55: Add Watchdog support
dt-bindings: watchdog: Add binding for Qcom SDX55
ARM: dts: qcom: sdx55-mtp: Enable USB3 and PHY support
ARM: dts: qcom: sdx55: Add USB3 and PHY support
dt-bindings: usb: qcom,dwc3: Add binding for SDX55
ARM: dts: qcom: msm8974-klte: Fix shdc numbering
...
Link: https://lore.kernel.org/r/20210204052320.388999-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- add thermal zones with cooling configuration
-----BEGIN PGP SIGNATURE-----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=Q9GJ
-----END PGP SIGNATURE-----
Merge tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt
ARM: dts: amlogic updates for v5.12
- add thermal zones with cooling configuration
* tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM: dts: meson8b: add the thermal-zones with cooling configuration
ARM: dts: meson8: add the thermal-zones with cooling configuration
ARM: dts: meson: add the ADC thermal sensor to meson.dtsi
ARM: dts: meson: move iio-hwmon for the SoC temperature to meson.dtsi
Link: https://lore.kernel.org/r/7ho8h12bto.fsf@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Update for moved and dropped options to make creating patches
against omap2plus_defconfig easier.
-----BEGIN PGP SIGNATURE-----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=I/ad
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.12/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/defconfig
Defconfig changes for omaps for v5.12 merge window
Update for moved and dropped options to make creating patches
against omap2plus_defconfig easier.
* tag 'omap-for-v5.12/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: Update for dropped options
ARM: omap2plus_defconfig: Update for moved options
Link: https://lore.kernel.org/r/pull-1612421637-483551@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add the Everest machine powered by an AST2600 chip. Copy the basic
configuration from Rainier.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Tested-by: Andrew Geissler <geissonator@gmail.com>
Link: https://lore.kernel.org/r/20201211170704.27640-1-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
The Mt. Jade BMC is an ASPEED AST2500-based BMC for the Mt. Jade
hardware reference platform with Ampere's Altra Processor Family.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Signed-off-by: Phong Vo <phong@os.amperecomputing.com>
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20201208043700.23098-3-quan@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Make functions used only in this module static to fix W=1 build warnings:
arch/arm/mach-s3c/irq-s3c24xx.c:360:39: warning:
no previous prototype for ‘s3c24xx_handle_irq’ [-Wmissing-prototypes]
arch/arm/mach-s3c/irq-s3c24xx.c:1308:12: warning:
no previous prototype for ‘s3c2410_init_intc_of’ [-Wmissing-prototypes]
arch/arm/mach-s3c/irq-s3c24xx.c:1330:12: warning:
no previous prototype for ‘s3c2416_init_intc_of’ [-Wmissing-prototypes]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20210206133615.119804-2-krzk@kernel.org
Include headers to fix W=1 build warnings:
arch/arm/mach-s3c/irq-s3c24xx.c:389:5: warning:
no previous prototype for ‘s3c24xx_set_fiq’ [-Wmissing-prototypes]
arch/arm/mach-s3c/irq-s3c24xx.c:683:13: warning:
no previous prototype for ‘s3c2410_init_irq’ [-Wmissing-prototypes]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20210206133615.119804-1-krzk@kernel.org
- only at91_dt_defconfig and sama5_defconfig modified
- update to match current options, unneeded options removed
- missing drivers added, some are on-SoC peripherals, some are helpers
- modify legacy ATAGS or DT options to match common usage
-----BEGIN PGP SIGNATURE-----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=GYHk
-----END PGP SIGNATURE-----
Merge tag 'at91-defconfig-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/defconfig
AT91 defconfig for 5.12, part 2:
- only at91_dt_defconfig and sama5_defconfig modified
- update to match current options, unneeded options removed
- missing drivers added, some are on-SoC peripherals, some are helpers
- modify legacy ATAGS or DT options to match common usage
* tag 'at91-defconfig-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: configs: sama5_defconfig: add QSPI driver
ARM: configs: at91_dt_defconfig: add ov7740 module
ARM: configs: at91_dt_defconfig: add useful helper options
ARM: configs: at91: DT/ATAG defconfig modifications
ARM: configs: sama5_defconfig: update and remove unneeded options
ARM: configs: at91: enable drivers for sam9x60
Link: https://lore.kernel.org/r/20210208115753.54730-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Compiling with the clang integrated assembler warns about
a recently added instruction:
<instantiation>:14:13: error: unknown token in expression
ldr tmp1, =#0x00020010UL
arch/arm/mach-at91/pm_suspend.S:542:2: note: while in macro instantiation
at91_plla_enable
Remove the extra '#' character that is not used for the 'ldr'
instruction when doing an indirect load of a constant.
Fixes: 4fd36e4583 ("ARM: at91: pm: add plla disable/enable support for sam9x60")
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210204160129.2249394-1-arnd@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
EXPORT_UNUSED_SYMBOL* is not actually used anywhere. Remove the
unused functionality as we generally just remove unused code anyway.
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Add Quad SPI driver to the sama5 defconfig. This driver is needed for
sama5d2 SoC.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Building with the clang integrated assembler produces a couple of
errors for the s3c24xx fiq support:
arch/arm/mach-s3c/irq-s3c24xx-fiq.S:52:2: error: instruction 'subne' can not set flags, but 's' suffix specified
subnes pc, lr, #4 @@ return, still have work to do
arch/arm/mach-s3c/irq-s3c24xx-fiq.S:64:1: error: invalid symbol redefinition
s3c24xx_spi_fiq_txrx:
There are apparently two problems: one with extraneous or duplicate
labels, and one with old-style opcode mnemonics. Stefan Agner has
previously fixed other problems like this, but missed this particular
file.
Fixes: bec0806cfe ("spi_s3c24xx: add FIQ pseudo-DMA support")
Cc: Stefan Agner <stefan@agner.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20210204162416.3030114-1-arnd@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The pxa-camera capture driver currently registers a v4l2-clk
clock, named "mclk", to represent the mt9m111 sensor clock.
Register a proper fixed-rate clock using the generic clock framework,
which will allow to remove the v4l2-clk clock in the pxa-camera
driver in a follow-up commit.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Acked-by: Arnd Bergmann <arnd@arndb.de> (for arch/arm/mach-*/)
Acked-by: Petr Cvek <petrcvekcz@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add OV7740 as a module as it's useful testing camera sensors on
sam9x60ek for instance. Unify with sama5_defconfig as well.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Add GPIO, SPI and I2C options that were missing from the
at91_dt_defconfig whereas they were in sama5_defconfig. It unifies all
AT91 defconfigs with same set of useful options.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
As all AT91 platforms are converted to DT for a long time, adapt the
defconfigs by:
- removing legacy CONFIG_ATAGS as a DT will always be provided;
- removing the CONFIG_ARM_APPENDED_DTB option on SAMA5 devices as the
vast majority of systems will use a DT-aware bootloader on these
devices.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Kconfig options are not present anymore or selected by default: remove
them from sama5_defconfig.
No change to kernel compilation expected.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Giancarlo Ferrari reports the following oops while trying to use kexec:
Unable to handle kernel paging request at virtual address 80112f38
pgd = fd7ef03e
[80112f38] *pgd=0001141e(bad)
Internal error: Oops: 80d [#1] PREEMPT SMP ARM
...
This is caused by machine_kexec() trying to set the kernel text to be
read/write, so it can poke values into the relocation code before
copying it - and an interrupt occuring which changes the page tables.
The subsequent writes then hit read-only sections that trigger a
data abort resulting in the above oops.
Fix this by copying the relocation code, and then writing the variables
into the destination, thereby avoiding the need to make the kernel text
read/write.
Reported-by: Giancarlo Ferrari <giancarlo.ferrari89@gmail.com>
Tested-by: Giancarlo Ferrari <giancarlo.ferrari89@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Ensure that the signal page contains our poison instruction to increase
the protection against ROP attacks and also contains well defined
contents.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
- Enable WM8962 support needed by imx8mn-beacon-kit.
- Enable PF8x00 support used by Boundary Nitrogen8M Mini SBC.
- Enable a few drivers for Librem 5 devkit support.
- Enable interconnect support for i.MX8MQ.
- Enable Broadcom BCM54140 PHY driver for Kontron K-Box A-230-LS.
- Enable RV3028 I2C RTC and PCA9532 driver support for phyBOARD-Pollux
i.MX8MP.
- Enable RN5T618 PMIC driver support in imx_v6_v7_defconfig.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmAbowwUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM4U5gf+PPpo0Tc8ys0z85tMxh3Yzk7L9jMG
MXIsD4dWjWhZZJV6oWH4HYxuQjqvrYbcprdrdeip/q//S0ch8farB2yft5E2+4el
RhqSig5Y0uySgVg/lJWtDSI4x5E7m0IMJBMydBdV0d/S+lXOXagKNNS4HgB7HWX9
DCPct6Img1RGcAFWw2dAaDZr5WHvrL28bA72SFBaSVh33bXjwoccl+p4rwCdHB24
OTVLHlpiPKo5gO7WxtQnGQuyzDpNstoLPQCfbOyDa0rS+eAA7o/CqaaU2o2Zshw/
hzs/xJiX1sMrRQ0lO7Atl98vYF/oUFlWAeBcIj7TCSz90nLus0NuojUD1g==
=Nud0
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig change for 5.12:
- Enable WM8962 support needed by imx8mn-beacon-kit.
- Enable PF8x00 support used by Boundary Nitrogen8M Mini SBC.
- Enable a few drivers for Librem 5 devkit support.
- Enable interconnect support for i.MX8MQ.
- Enable Broadcom BCM54140 PHY driver for Kontron K-Box A-230-LS.
- Enable RV3028 I2C RTC and PCA9532 driver support for phyBOARD-Pollux
i.MX8MP.
- Enable RN5T618 PMIC driver support in imx_v6_v7_defconfig.
* tag 'imx-defconfig-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: Enable PF8x00 as builtin
arm64: defconfig: Enable vibra-pwm
arm64: defconfig: Enable Broadcom BCM54140 PHY
arm64: defconfig: Enable interconnect for imx8mq
arm64: defconfig: Enable PCA9532 support
arm64: defconfig: Enable rv3028 i2c rtc driver
arm64: defconfig: Enable Librem 5 devkit components
ARM: imx_v6_v7_defconfig: enable power driver of RN5T618 PMIC family
arm64: defconfig: Enable WM8962
Link: https://lore.kernel.org/r/20210204120150.26186-6-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This enables various device drivers found on the newly introduced
Qualcomm SDX55 platform in the qcom_defconfig. Due to kernel image size
constraints the qcom_defconfig is used instead of multi_v7_defconfig,
for now.
-----BEGIN PGP SIGNATURE-----
iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmAbg0MbHGJqb3JuLmFu
ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FGLwP/3ruxReZRfxe9jEVE/ov
96qKlsiXR0P6qjPxul8ThYc7cOmMVowCwfN3Mu+7MDHOtIiqZxm8DOfvt/ztacgk
ZXgvxBpUTrIYSWSXmoDEKZA/LDTwh4SRNIFU2HfsuxDN2jthEL1/F1jjXBB5l6RE
X4YtusljnvUzObTXyBvWvsvFo0/cUyudp81SDqQLtZxdYJdpB7rzi9GpickRteRl
Lfg3LRVjMvVTEtRg3bHMFmvxzAkUYWsLK0J+niZA0puWa0ZQ/oqeASC9Xw3LfXY4
o6Dy3SgNB3jKZSJ/CWYYfGt4x3m/ETWyi+kFlwm9aVm8Zq3eICCVRmX9RjgqFUZY
os17BWPry1UIYLGSrkqVRuHgHoWGI5JldbW48Mb/FzwRSdx7ZxJhYkHZVysfx+Aw
YV6F7BWHf3iD7liKG7ZaWFFfLQ/Cv9Zt2+4azdLoDUwOyNDlVO37RozRX0+mtnyb
bLHeXvl1OH9BLMiDqpZEvVDj+p4pi2tdd2gpy3ogS+5QHvQCqYaSVfkbsCthRa4x
UdipsO7t0sFGXG4qExgfBzk4rFZiU37e4ukGSI1KJM4GkMIQrncavwFvXZ9+r+H6
nNFYgkOuVpbi1Myq6tC4xpY0nyU4gvz7QFCZfhlPPPSy7H3qT9yzYKVsjV2UL4KY
iBUkClCnf1IdmBIQ3O1bLdOt
=GS05
-----END PGP SIGNATURE-----
Merge tag 'qcom-defconfig-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm ARM defconfig updates for 5.12
This enables various device drivers found on the newly introduced
Qualcomm SDX55 platform in the qcom_defconfig. Due to kernel image size
constraints the qcom_defconfig is used instead of multi_v7_defconfig,
for now.
* tag 'qcom-defconfig-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: qcom_defconfig: Enable Command DB driver
ARM: qcom_defconfig: Enable RPMh power domain driver
ARM: qcom_defconfig: Enable ARM PSCI support
ARM: qcom_defconfig: Enable watchdog driver
ARM: qcom_defconfig: Enable RPMh regulator
ARM: qcom_defconfig: Enable ARM SMMU
ARM: qcom_defconfig: Enable DWC3 controller and PHYs
ARM: qcom_defconfig: Enable UBI file system
ARM: qcom_defconfig: Enable MTD UBI driver
ARM: qcom_defconfig: Enable SMEM partition parser
ARM: qcom_defconfig: Enable SDX55 GCC driver
ARM: qcom_defconfig: Enable SDX55 pinctrl driver
ARM: qcom_defconfig: Enable RPMh drivers
Link: https://lore.kernel.org/r/20210204052236.388783-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- enable support for the ADC thermal sensor as module
-----BEGIN PGP SIGNATURE-----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=XGuV
-----END PGP SIGNATURE-----
Merge tag 'amlogic-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/defconfig
ARM: multi_v7_defconfig: amlogic updtes for v5.12
- enable support for the ADC thermal sensor as module
* tag 'amlogic-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM: multi_v7_defconfig: Enable support for the ADC thermal sensor
Link: https://lore.kernel.org/r/7hsg6d2bxg.fsf@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Without DT aliases, the numbering of mmc interfaces is unpredictable.
Adding them makes it possible to refer to devices consistently. The
popular suggestion to use UUIDs obviously doesn't work with a blank
device fresh from the factory.
See commit fa2d0aa969 ("mmc: core: Allow setting slot index via
device tree alias") for more discussion.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The 32-bit Amlogic Meson SoCs embed an ARC processor in the Always-On
power domain which is typically used for managing system suspend. The
memory for this ARC core is taken from the AHB SRAM area. Depending on
the actual SoC a different ARC core is used:
- Meson6 and earlier: some ARCv1 ISA based core (probably an ARC625)
- Meson8 and later: an ARC EM4 (ARCv2 ISA) based core
Add the device-tree node for this remote-processor along with the
required SRAM sections, clocks and reset-lines. Also use the
SoC-specific compatible string to manage any differences (should
they exist).
On Meson8, Meson8b and Meson8m2 the "secbus2" IO region is needed as
some bits need to be programmed there. Add this IO region for those
SoCs as well.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210102205904.2691120-6-martin.blumenstingl@googlemail.com
The code fixes in this round are all for the Texas Instruments OMAP
platform, addressing several regressions related to the ti-sysc
interconnect changes that was merged in linux-5.11 and one recently
introduced RCU usage warning.
Tero Kristo updates his maintainer file entries as he is changing
to a new employer.
The other changes are for devicetree files across eight different
platforms:
TI OMAP:
- multiple gpio related one-line fixes
Allwinner/sunxi:
- ARM: dts: sun7i: a20: bananapro: Fix ethernet phy-mode
- soc: sunxi: mbus: Remove DE2 display engine compatibles
NXP lpc32xx:
- ARM: dts: lpc32xx: Revert set default clock rate of HCLK PLL
STMicroelectronics stm32
- multiple minor fixes for DHCOM/DHCOR boards
NXP Layerscape:
- Fix DCFG address range on LS1046A SoC
Amlogic meson:
- fix reboot issue on odroid C4
- revert an ethernet change that caused a regression
- meson-g12: Set FL-adj property value
Rockchip:
- multiple minor fixes on 64-bit rockchip machines
Qualcomm:
- Regression fixes for Lenovo Yoga touchpad and for
interconnect configuration
- Boot fixes for 'LPASS' clock configuration on two machines
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=dXiS
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-fixes-v5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"The code fixes in this round are all for the Texas Instruments OMAP
platform, addressing several regressions related to the ti-sysc
interconnect changes that was merged in linux-5.11 and one recently
introduced RCU usage warning.
Tero Kristo updates his maintainer file entries as he is changing to a
new employer.
The other changes are for devicetree files across eight different
platforms:
TI OMAP:
- multiple gpio related one-line fixes
Allwinner/sunxi:
- ARM: dts: sun7i: a20: bananapro: Fix ethernet phy-mode
- soc: sunxi: mbus: Remove DE2 display engine compatibles
NXP lpc32xx:
- ARM: dts: lpc32xx: Revert set default clock rate of HCLK PLL
STMicroelectronics stm32
- multiple minor fixes for DHCOM/DHCOR boards
NXP Layerscape:
- Fix DCFG address range on LS1046A SoC
Amlogic meson:
- fix reboot issue on odroid C4
- revert an ethernet change that caused a regression
- meson-g12: Set FL-adj property value
Rockchip:
- multiple minor fixes on 64-bit rockchip machines
Qualcomm:
- Regression fixes for Lenovo Yoga touchpad and for interconnect
configuration
- Boot fixes for 'LPASS' clock configuration on two machines"
* tag 'arm-soc-fixes-v5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (31 commits)
ARM: dts: lpc32xx: Revert set default clock rate of HCLK PLL
ARM: dts: sun7i: a20: bananapro: Fix ethernet phy-mode
arm64: dts: ls1046a: fix dcfg address range
soc: sunxi: mbus: Remove DE2 display engine compatibles
arm64: dts: meson: switch TFLASH_VDD_EN pin to open drain on Odroid-C4
Revert "arm64: dts: amlogic: add missing ethernet reset ID"
arm64: dts: rockchip: Disable display for NanoPi R2S
ARM: dts: omap4-droid4: Fix lost keypad slide interrupts for droid4
arm64: dts: rockchip: remove interrupt-names property from rk3399 vdec node
drivers: bus: simple-pm-bus: Fix compatibility with simple-bus for auxdata
ARM: OMAP2+: Fix booting for am335x after moving to simple-pm-bus
ARM: OMAP2+: Fix suspcious RCU usage splats for omap_enter_idle_coupled
ARM: dts: stm32: Fix GPIO hog flags on DHCOM DRC02
ARM: dts: stm32: Fix GPIO hog flags on DHCOM PicoITX
ARM: dts: stm32: Fix GPIO hog names on DHCOM
ARM: dts: stm32: Disable optional TSC2004 on DRC02 board
ARM: dts: stm32: Disable WP on DHCOM uSD slot
ARM: dts: stm32: Connect card-detect signal on DHCOM
ARM: dts: stm32: Fix polarity of the DH DRC02 uSD card detect
arm64: dts: qcom: sdm845: Reserve LPASS clocks in gcc
...
SoCs with the Display Engine 2
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCYBp2xgAKCRDj7w1vZxhR
xTzSAQD93OPoQ46cIrk3g2zSdCUKNiorllwwsCmJ64A5Y4RrqwEA46aerSUprOVS
93zKBYrFnbqvQUWbaZgs8CYUFxD/GQU=
=dvMb
-----END PGP SIGNATURE-----
Merge tag 'sunxi-fixes-for-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes
One fix for a phy-mode ethernet issue, and one to fix the display output on
SoCs with the Display Engine 2
* tag 'sunxi-fixes-for-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sun7i: a20: bananapro: Fix ethernet phy-mode
soc: sunxi: mbus: Remove DE2 display engine compatibles
Link: https://lore.kernel.org/r/f8298059-f9ca-43b4-9e29-35bc0e0c9b15.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This reverts commit c17e9377aa.
The lpc32xx clock driver is not able to actually change the PLL rate as
this would require reparenting ARM_CLK, DDRAM_CLK, PERIPH_CLK to SYSCLK,
then stop the PLL, update the register, restart the PLL and wait for the
PLL to lock and finally reparent ARM_CLK, DDRAM_CLK, PERIPH_CLK to HCLK
PLL.
Currently, the HCLK driver simply updates the registers but this has no
real effect and all the clock rate calculation end up being wrong. This is
especially annoying for the peripheral (e.g. UARTs, I2C, SPI).
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Link: https://lore.kernel.org/r/20210203090320.GA3760268@piout.net'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
BPi Pro needs TX and RX delay for Gbit to work reliable and avoid high
packet loss rates. The realtek phy driver overrides the settings of the
pull ups for the delays, so fix this for BananaPro.
Fix the phy-mode description to correctly reflect this so that the
implementation doesn't reconfigure the delays incorrectly. This
happened with commit bbc4d71d63 ("net: phy: realtek: fix rtl8211e
rx/tx delay config").
Fixes: 10662a33dc ("ARM: dts: sun7i: Add dts file for Bananapro board")
Signed-off-by: Hermann Lauer <Hermann.Lauer@uni-heidelberg.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210128111842.GA11919@lemon.iwr.uni-heidelberg.de
s1 and l12 regulators are used for the memory and cache on the Samsung
S5 (klte). If they are turned off the phone shuts down. So mark them as
always-on to prevent that from happening.
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Tested-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Link: https://lore.kernel.org/r/20210201105657.1642825-4-iskren.chernev@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add initial support for the display found on the Samsung Galaxy 5 (klte)
phone. This is based on work from Jonathan Marek & Brian Masney.
Signed-off-by: Samuel Pascua <pascua.samuel.14@gmail.com>
[iskren.chernev@gmail.com: add reset gpio, regulators]
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Link: https://lore.kernel.org/r/20210201105657.1642825-3-iskren.chernev@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add support for the a3xx GPU. opp_table is chosen to include lower
frequencies common to all different msm8974 variants.
Signed-off-by: Brian Masney <masneyb@onstation.org>
[iskren.chernev@gmail.com: change after v1]
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Link: https://lore.kernel.org/r/20210201105657.1642825-1-iskren.chernev@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
changes for 5.12, please pull the following:
- Maxime adds a select of the Broadcom STB standard L2 interrupt
controller driver which is used in the Raspberry Pi 4 HDMI controller to
support I2C and CEC interrupts
- Florian adds a debug URT entry for the 72116 STB SoC
-----BEGIN PGP SIGNATURE-----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=aVSR
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.12/soc' of https://github.com/Broadcom/stblinux into arm/soc
This pull request contains Broadcom ARM-based SoCs Kconfig/machine entry
changes for 5.12, please pull the following:
- Maxime adds a select of the Broadcom STB standard L2 interrupt
controller driver which is used in the Raspberry Pi 4 HDMI controller to
support I2C and CEC interrupts
- Florian adds a debug URT entry for the 72116 STB SoC
* tag 'arm-soc/for-5.12/soc' of https://github.com/Broadcom/stblinux:
ARM: bcm: Select BRCMSTB_L2_IRQ for bcm2835
ARM: brcmstb: Add debug UART entry for 72116
Link: https://lore.kernel.org/r/20210131221721.685974-6-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The firmware leaves the pins in GPIO mode. Until we have a proper pinmux
driver hooked on we just need to bitbang SPI. No big deal, this is just
used for the power button and performance is not important.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20210121034130.1381872-12-lkundrak@v3.sk'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This adds support for the power button attached to the Embedded Controller
on a Dell Wyse 3020 "Ariel" board.
However, while the EC itself is controlled via I2C, the input capability
for the power button acts as a separate device attached to the SPI, hence
it has a separate device node.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20210121034130.1381872-11-lkundrak@v3.sk'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add the device node for the computer's embedded controller, responsible
for controlling the LEDs and system power.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20210121034130.1381872-10-lkundrak@v3.sk'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The ACGR register is at the offset of 0x1024, beyond the 4k originally
assigned to the MPMU range.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20210121034130.1381872-7-lkundrak@v3.sk'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Drop the linux,usable-memory properties; the schema is unhappy about
them.
They've been cargo-culted from Open Firmware and I don't know what
purpose they serve. Perhaps they are meant to provide the OFW runtime.
In that case it's still okay to drop them from here; OFW is welcome to add
it upon boot.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20210121034130.1381872-6-lkundrak@v3.sk'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Drop the linux,usable-memory properties; the schema is unhappy about
them:
mmp2-olpc-xo-1-75.dt.yaml: /: memory: False schema does not allow
{'linux,usable-memory': [[0, 528482304]],
'available': [[847872, 519245824, 4096, 782336]],
'reg': [[0, 536870912]], 'device_type': ['memory']}
They've been cargo-culted from Open Firmware and I don't know what
purpose they serve. Perhaps they are meant to provide the OFW runtime.
In that case it's still okay to drop them from here; OFW is welcome to add
it upon boot.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20210121034130.1381872-5-lkundrak@v3.sk'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Improve LED and fan support on Helios4 boad (Armada 388 based)
Add ECC configuration for Linksys board (Aramda 385 based)
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCYBgmmwAKCRALBhiOFHI7
1Wu7AKChZUwxab38QXEkPxLvaXGOW+BELwCfXjYbGc9Utnl5Le0HbuWmam+VRA8=
=ZHNA
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt
mvebu dt for 5.12 (part 1)
Improve LED and fan support on Helios4 boad (Armada 388 based)
Add ECC configuration for Linksys board (Aramda 385 based)
* tag 'mvebu-dt-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
ARM: dts: armada388-helios4: assign pinctrl to each fan
ARM: dts: armada388-helios4: assign pinctrl to LEDs
ARM: dts: armada-385-linksys: fix usage with newer devices
Link: https://lore.kernel.org/r/87sg6fn49o.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
for 5.12, please pull the following:
- Dave adds a proper compatile string for the DSI1 panel on 2711
(Raspberry Pi 4) to permit adequate driver differentiation
- Nicolas declares reserved memory regions filed by the Rasbperry Pi
bootloader to indicate the running system configuration
- Maxime declares the BSC (HDMI I2C controller) and CEC interrupt
controllers
- Stanislav fixes a tab vs. space issue in the BCM21664 DTS
-----BEGIN PGP SIGNATURE-----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=VFVR
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.12/devicetree' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 5.12, please pull the following:
- Dave adds a proper compatile string for the DSI1 panel on 2711
(Raspberry Pi 4) to permit adequate driver differentiation
- Nicolas declares reserved memory regions filed by the Rasbperry Pi
bootloader to indicate the running system configuration
- Maxime declares the BSC (HDMI I2C controller) and CEC interrupt
controllers
- Stanislav fixes a tab vs. space issue in the BCM21664 DTS
* tag 'arm-soc/for-5.12/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm2711: Add the CEC interrupt controller
ARM: dts: bcm21664: Replace spaces with a tab
ARM: dts: bcm2711: Add the BSC interrupt controller
ARM: dts: bcm2711: Add reserved memory template to hold firmware configuration
ARM: dts: bcm2711: Use compatible string for BCM2711 DSI1
Link: https://lore.kernel.org/r/20210131221721.685974-3-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
adding:
- DT fixes spotted through the schemas
- Mali Support for the A10s/A13/GR8/R8
- MMC improvements for the A64 and H6
- New board: SL631 Action Camera, PineTab Early Adopter
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCYBb7uwAKCRDj7w1vZxhR
xd3mAP46LnfQ/9vvCjhWMV5J7E1ob3u1A5ND3sULpS0X0oEU1wD/aCuoCtSZY4hN
/lpCtj2QS1GAH8c5ipHqB8SgBRmCoQo=
=fzEu
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Our usual bunch of patches to support the Allwinner SoCs, this time
adding:
- DT fixes spotted through the schemas
- Mali Support for the A10s/A13/GR8/R8
- MMC improvements for the A64 and H6
- New board: SL631 Action Camera, PineTab Early Adopter
* tag 'sunxi-dt-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (47 commits)
ARM: dts: sunxi: Rename nmi_intc to r_intc
ARM: dts: sun8i: h2-plus: bananapi-m2-zero: Increase BT UART speed
ARM: dts: sunxi: bananapi-m2-plus: Increase BT UART speed
arm64: dts: allwinner: pine-h64: Fix typos in BT GPIOs
arm64: dts: allwinner: pinetab: Fix the panel compatible
arm64: dts: allwinner: pinephone: Remove useless light sensor supplies
arm64: dts: allwinner: h6: Use - instead of @ for DT OPP entries
ARM: dts: sun8i-a33: sina33: Add missing panel power supply
ARM: dts: sun8i-a83t: Remove empty CSI port
ARM: dts: sun8i-s3: pinecube: Fix CSI DTC warnings
ARM: dts: sun8i-s3: impetus: Fix the USB PHY ID detect GPIO properties
ARM: dts: sun8i: nanopi-r1: Fix GPIO regulator state array
ARM: dts: sun6i: primo81: Remove useless io-channel-cells
ARM: dts: sunxi: Fix CPU thermal zone node name
ARM: dts: sunxi: Add missing backlight supply
ARM: dts: sunxi: Fix the LED node names
dt-bindings: rtc: sun6i-a31-rtc: Loosen the requirements on the clocks
dt-bindings: iio: adc: Add AXP803 compatible
dt-bindings: sunxi: Fix the pinecube compatible
ARM: dts: sun8i-v3s: Add CSI0 MCLK pin definition
...
Link: https://lore.kernel.org/r/48511540-fdd6-4fbe-8037-ec9fa8436147.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Remove asm/fixmap.h which is included more than once.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hailong Liu <liu.hailong6@zte.com.cn>
Signed-off-by: Hailong Liu <carver4lio@163.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
ARM has recently supported KASAN, so I think that it's time to add
KASAN regions for PTDUMP on ARM.
This patch has been tested with QEMU + vexpress-a15. Both
CONFIG_ARM_LPAE and no CONFIG_ARM_LPAE.
The result after patching looks like this:
---[ Kasan shadow start ]---
0x6ee00000-0x7af00000 193M RW NX SHD MEM/CACHED/WBWA
0x7b000000-0x7f000000 64M ro NX SHD MEM/CACHED/WBWA
---[ Kasan shadow end ]---
---[ Modules ]---
---[ Kernel Mapping ]---
......
---[ vmalloc() Area ]---
......
---[ vmalloc() End ]---
---[ Fixmap Area ]---
---[ Vectors ]---
......
---[ Vectors End ]---
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hailong liu <liu.hailong6@zte.com.cn>
Signed-off-by: Hailong liu <carver4lio@163.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
The vdso linker script is prepocessed on demand. Adding it to 'targets'
is enough, and line 13 of this Makefile does that. This extra-y addition
is unneeded.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Currently ARCH_HAVE_NMI_SAFE_CMPXCHG is not set on Arm systems and this
makes it impossible to enable features such as ftrace histogram triggers
on Arm platforms.
Most Arm systems are NMI safe simply because there is no NMI but this isn't
universally true meaning we cannot set ARCH_HAVE_NMI_SAFE_CMPXCHG for all
Arm devices. However the load/store exclusive implementation of cmpxchg is
NMI-safe and this implementation is used ARMv6k and later. Let's select
ARCH_HAVE_NMI_SAFE_CMPXCHG for these systems.
Note that ARMv6 uses load/store exclusive for 32-bit cmpxchg but relies on
interrupt masking for 8- and 16-bit operations. This patch is conservative
and does not change behaviour for CPU_V6.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Linus Torvalds