Commit Graph

322 Commits

Author SHA1 Message Date
Dave Airlie fbf81762e3 drm/kms: disable/enable poll around switcheroo on/off
Because we aren't in a suspend state the poll will still run when we have switcherooed a card off.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-01 10:36:02 +10:00
Dave Airlie fc5ea29d72 drm/nouveau: fixup confusion over which handle the DSM is hanging off.
This fixes the DSM setup correctly since vga switcheroo.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-01 10:24:30 +10:00
Dave Airlie afeb3e1114 drm/nouveau: attempt to get bios from ACPI v3
Some of the laptops with the switchable graphics, seem to not post the secondary GPU at all, and we can't find a copy of the BIOS anywhere except in the ACPI rom retrieval.

This adds support for ACPI ROM retrieval to nouveau.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-01 10:24:21 +10:00
Jordan Crouse dcdb167402 drm: Add support for platform devices to register as DRM devices
Allow platform devices without PCI resources to be DRM devices.

[airlied: fixup warnings with dev pointers]

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-01 10:07:39 +10:00
Jordan Crouse 01d73a6967 drm: Remove drm_resource wrappers
Remove the drm_resource wrappers and directly use the
actual PCI and/or platform functions in their place.

[airlied: fixup nouveau properly to build]

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-01 10:07:24 +10:00
Ben Skeggs 8b281db596 drm/nv50: cast IGP memory location to u64 before shifting
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-06-01 09:49:12 +10:00
Ben Skeggs becd214277 drm/nv50: use alternate source of SOR_MODE_CTRL for DP hack
Fixes module unload+reload on Dell M4500, where the "normal" registers
get reset to 0.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-05-28 16:06:59 +10:00
Ben Skeggs 26099a7480 drm/nouveau: fix dual-link displays when plugged into single-link outputs
When selecting the native mode for a display we weren't taking into account
whether or not it was actually supported on that particular output.

This patch modifies our native mode selection to run all modes through
mode_valid() first.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-05-28 16:06:51 +10:00
Ben Skeggs 2c58077541 drm/nv50: obey dcb->duallink_possible
It was once assumed that all G8x had dual-link TMDS everywhere, this isn't
actually the case - especially considering passive DP->DVI converters and
some HDMI connectors only support single-link.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-05-28 16:06:45 +10:00
Ben Skeggs 23484874e6 drm/nv50: fix duallink_possible calculation for DCB 4.0 cards
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-05-28 16:06:42 +10:00
Ben Skeggs 73db4bedc5 drm/nouveau: don't execute INIT_GPIO unless we're really running the table
This resulted in accidently switching off the eDP panel on certain laptops
since the default state in the GPIO table was off.

Fixes rh#582621

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-05-28 16:06:36 +10:00
Ben Skeggs f50c0b91e7 drm/nv40: allow cold-booting of nv4x chipsets
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-05-28 16:06:32 +10:00
Ben Skeggs d13102c6b4 drm/nouveau: fix POST detection for certain chipsets
We totally fail at detecting un-POSTed chipsets prior to G80.  This commit
changes the pre-G80 POST detection to read the programmed horizontal total
from CRTC 0, and assume the card isn't POSTed if it's 0.

NVIDIA use some other heuristics more similar to what we do on G80, but I
wasted quite a long time trying to figure out the exact specifics of what
they do so we can try this for a bit instead.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-05-28 16:06:28 +10:00
Marcin Kościelnicki 7fc74f17e6 drm/nouveau: Add getparam for current PTIMER time.
This will be useful for computing GPU-CPU latency, including
GL_ARB_timer_query extension.

Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-05-28 16:06:21 +10:00
Maarten Maathuis b334f2b3b6 drm/nouveau: allow cursor image and position to survive suspend
- This isn't triggered yet on a normal kernel, because it still does a VT
switch, but it seemed like a good idea to fix this now.

Tested-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Maarten Maathuis <madman2003@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-05-28 16:06:17 +10:00
Prarit Bhargava f49d273df9 drm: Fixes linux-next & linux-2.6 checkstack warnings:
drivers/gpu/drm/nouveau/nv40_graph.c: In function `nv40_graph_init':
drivers/gpu/drm/nouveau/nv40_graph.c:400: warning: the frame size of 1184 bytes is larger than 1024 bytes
drivers/gpu/drm/radeon/radeon_atombios.c: In function `radeon_get_atom_connector_info_from_supported_devices_table':
drivers/gpu/drm/radeon/radeon_atombios.c:857: warning: the frame size of 1872 bytes is larger than 1024 bytes

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-24 10:24:07 +10:00
Randy Dunlap 579766020d nouveau: fix acpi_lid_open undefined
When CONFIG_ACPI_BUTTON=m (and probably when ACPI_BUTTON is not enabled)
and NOUVEAU is built-in (not as a loadable module):

nouveau_connector.c:(.text+0xe17ce): undefined reference to `acpi_lid_open'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-24 10:21:47 +10:00
Ben Skeggs 893887ed75 drm/nouveau: fix i2c-related init table handlers
Mutliple issues.  INIT_ZM_I2C_BYTE/INIT_I2C_BYTE didn't even try and
use the register value, and all the handlers were using the wrong
slave address.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-05-19 16:22:08 +10:00
Ben Skeggs 04f542c07e drm/nouveau: support init table i2c device identifier 0x81
It appears to be meant to reference the second "default index".

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-05-19 16:22:07 +10:00
Ben Skeggs f8b0be1a75 drm/nouveau: ensure we've parsed i2c table entry for INIT_*I2C* handlers
We may not have parsed the entry yet if the i2c_index is for an i2c bus
that's not referenced by a DCB encoder.

This could be done oh so much more nicely, except we have to care about
prehistoric DCB tables too, and they make life painful.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-05-19 16:22:05 +10:00
Ben Skeggs 92b9618761 drm/nouveau: display error message for any failed init table opcode
Some handlers don't report specific errors, but we still *really* want to
know if we failed to parse a complete init table.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-05-19 16:22:04 +10:00
Ben Skeggs 9170a82438 drm/nouveau: fix init table handlers to return proper error codes
We really want to be able to distinguish between INIT_DONE and an actual
error sometimes.  This commit fixes up several lazy "return 0;" to be
actual error codes, and explicitly reserves "0" as "success, but stop
parsing this table".

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-05-19 16:22:00 +10:00
Ben Skeggs e9ebb68b86 drm/nv50: support fractional feedback divider on newer chips
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-05-19 16:21:59 +10:00
Ben Skeggs 7e99a9b2b5 drm/nv50: fix monitor detection on certain chipsets
There appears to be some kind of switch on certain chips to control whether
the DP auxch or traditional i2c bus will be operational on a connector,
this commit hopefully fixes nouveau to do the right thing.

Likely only relevent on chips with DP outputs.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-05-19 13:15:16 +10:00
Ben Skeggs 07fee3d561 drm/nv50: store full dcb i2c entry from vbios
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-05-19 13:15:16 +10:00
Ben Skeggs afa3b4c377 drm/nv50: fix suspend/resume with DP outputs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-05-19 13:15:16 +10:00
Ben Skeggs 17b96cc38d drm/nv50: output calculated crtc pll when debugging on
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-05-19 13:15:15 +10:00
Ben Skeggs 4c389f00d5 drm/nouveau: dump pll limits entries when debugging is on
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-05-19 13:15:15 +10:00
Ben Skeggs 25908b7797 drm/nouveau: bios parser fixes for eDP boards
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-05-19 13:15:15 +10:00
Ben Skeggs 90af89b93c drm/nouveau: fix a nouveau_bo dereference after it's been destroyed
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-05-19 13:15:14 +10:00
Ben Skeggs de1f46a4b9 drm/nv40: remove some completed ctxprog TODOs
I actually thought these were gone already when the initial commit was
done.. I guess not!

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-05-19 13:15:14 +10:00
Marcin Kościelnicki f23d4cf4bd drm/nv04: Implement missing nv04 PGRAPH methods in software.
Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-05-19 13:15:14 +10:00
Marcin Kościelnicki a0e6544089 drm/nouveau: Use 0x5f instead of 0x9f as imageblit on original NV10.
Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-05-19 13:15:14 +10:00
Dave Airlie eb1f8e4f3b drm/fbdev: rework output polling to be back in the core. (v4)
After thinking it over a lot it made more sense for the core to deal with
the output polling especially so it can notify X.

v2: drop plans for fake connector - per Michel's comments - fix X patch sent to xorg-devel, add intel polled/hpd setting, add initial nouveau polled/hpd settings.

v3: add config lock take inside polling, add intel/nouveau poll init/fini calls

v4: config lock was a bit agressive, only needed around connector list reading.
otherwise it could re-enter.

glisse: discard drm_helper_hpd_irq_event

v3: Reviewed-by: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 17:40:11 +10:00
Marcin Slusarz 3b9676e7ac vga16fb, drm: vga16fb->drm handoff
let vga16fb claim 0xA0000+0x10000 region as its aperture;
drm drivers don't use it, so we have to detect it and kick
vga16fb manually - but only if drm is driving the primary card

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: James Simmons <jsimmons@infradead.org>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 16:19:30 +10:00
Marcin Slusarz 06415c564f fbmem, drm/nouveau: kick firmware framebuffers as soon as possible
Currently vesafb/efifb/... is kicked when hardware driver is registering
framebuffer. To do it hardware must be fully functional, so there's a short
window between start of initialisation and framebuffer registration when
two drivers touch the hardware. Unfortunately sometimes it breaks nouveau
initialisation.

Fix it by kicking firmware driver(s) before we start touching the hardware.

Reported-by: Didier Spaier <didier.spaier@epsm.fr>
Tested-by: Didier Spaier <didier.spaier@epsm.fr>
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 16:19:28 +10:00
Marcin Slusarz 1471ca9aa7 fbdev: allow passing more than one aperture for handoff
It removes a hack from nouveau code which had to detect which
region to pass to kick vesafb/efifb.

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 16:19:27 +10:00
Julia Lawall f405a1ab2b drivers/gpu/drm: Use kmemdup
Use kmemdup when some other buffer is immediately copied into the
allocated region.

A simplified version of the semantic patch that makes this change is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression from,to,size,flag;
statement S;
@@

-  to = \(kmalloc\|kzalloc\)(size,flag);
+  to = kmemdup(from,size,flag);
   if (to==NULL || ...) S
-  memcpy(to, from, size);
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 15:55:55 +10:00
Dave Airlie 7547a917fa Merge branch 'drm-ttm-unmappable' into drm-core-next
* drm-ttm-unmappable:
  drm/radeon/kms: enable use of unmappable VRAM V2
  drm/ttm: remove io_ field from TTM V6
  drm/vmwgfx: add support for new TTM fault callback V5
  drm/nouveau/kms: add support for new TTM fault callback V5
  drm/radeon/kms: add support for new fault callback V7
  drm/ttm: ttm_fault callback to allow driver to handle bo placement V6
  drm/ttm: split no_wait argument in 2 GPU or reserve wait

Conflicts:
	drivers/gpu/drm/nouveau/nouveau_bo.c
2010-04-20 14:15:09 +10:00
Jerome Glisse 0c321c7962 drm/ttm: remove io_ field from TTM V6
All TTM driver have been converted to new io_mem_reserve/free
interface which allow driver to choose and return proper io
base, offset to core TTM for ioremapping if necessary. This
patch remove what is now deadcode.

V2 adapt to match with change in first patch of the patchset
V3 update after io_mem_reserve/io_mem_free callback balancing
V4 adjust to minor cleanup
V5 remove the needs ioremap flag
V6 keep the ioremapping facility in TTM

[airlied- squashed driver removals in here also]

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-20 14:13:09 +10:00
Jerome Glisse f32f02fd81 drm/nouveau/kms: add support for new TTM fault callback V5
This add the support for the new fault callback, does change anything
from driver point of view, thought it should allow nouveau to add
support for unmappable VRAM.

Improvement: store the aperture base in a variable so that we don't
call a function to get it on each fault.

Patch hasn't been tested on any hw.

V2 don't derefence bo->mem.mm_node as it's not NULL only for
   VRAM or GTT
V3 update after io_mem_reserve/io_mem_free callback balancing
V4 callback has to ioremap
V5 ioremap is done by ttm

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-20 14:12:34 +10:00
Daniel Vetter fd632aa34c drm: free core gem object from driver callbacks
When drivers embed the core gem object into their own structures,
they'll have to do this. Temporarily this results in an ugly

kfree(gem_obj);

in every gem driver.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-20 13:19:33 +10:00
Dave Airlie 7fff400be6 Merge branch 'drm-fbdev-cleanup' into drm-core-next
* drm-fbdev-cleanup:
  drm/fb: remove drm_fb_helper_setcolreg
  drm/kms/fb: use slow work mechanism for normal hotplug also.
  drm/kms/fb: add polling support for when nothing is connected.
  drm/kms/fb: provide a 1024x768 fbcon if no outputs found.
  drm/kms/fb: separate fbdev connector list from core drm connectors
  drm/kms/fb: move to using fb helper crtc grouping instead of core crtc list
  drm/fb: fix fbdev object model + cleanup properly.

Conflicts:
	drivers/gpu/drm/i915/i915_drv.h
	drivers/gpu/drm/nouveau/nouveau_drv.h
2010-04-20 13:16:04 +10:00
Dave Airlie c2b41276da Merge branch 'drm-ttm-pool' into drm-core-next
* drm-ttm-pool:
  drm/ttm: using kmalloc/kfree requires including slab.h
  drm/ttm: include linux/seq_file.h for seq_printf
  drm/ttm: Add sysfs interface to control pool allocator.
  drm/ttm: Use set_pages_array_wc instead of set_memory_wc.
  arch/x86: Add array variants for setting memory to wc caching.
  drm/nouveau: Add ttm page pool debugfs file.
  drm/radeon/kms: Add ttm page pool debugfs file.
  drm/ttm: Add debugfs output entry to pool allocator.
  drm/ttm: add pool wc/uc page allocator V3
2010-04-20 13:12:28 +10:00
Linus Torvalds 2f10ffcfb2 Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (29 commits)
  drm/nouveau: bail out of auxch transaction if we repeatedly recieve defers
  drm/nv50: implement gpio set/get routines
  drm/nv50: parse/use some more de-magiced parts of gpio table entries
  drm/nouveau: store raw gpio table entry in bios gpio structs
  drm/nv40: Init some tiling-related PGRAPH state.
  drm/nv50: Add NVA3 support in ctxprog/ctxvals generator.
  drm/nv50: another dodgy DP hack
  drm/nv50: punt hotplug irq handling out to workqueue
  drm/nv50: preserve an unknown SOR_MODECTRL value for DP encoders
  drm/nv50: Allow using the NVA3 new compute class.
  drm/nv50: cleanup properly if PDISPLAY init fails
  drm/nouveau: fixup the init failure paths some more
  drm/nv50: fix instmem init on IGPs if stolen mem crosses 4GiB mark
  drm/nv40: add LVDS table quirk for Dell Latitude D620
  drm/nv40: rework lvds table parsing
  drm/nouveau: detect vram amount once, and save the value
  drm/nouveau: remove some unused members from drm_nouveau_private
  drm/nouveau: Make use of TTM busy_placements.
  drm/nv50: add more 0x100c80 flushy magic
  drm/nv50: fix fbcon when framebuffer above 4GiB mark
  ...
2010-04-09 11:50:01 -07:00
Ben Skeggs 8e024f1314 drm/nouveau: bail out of auxch transaction if we repeatedly recieve defers
There's one known case where we never stop recieving DEFER, and loop here
forever.  Lets not do that..

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-04-09 10:20:15 +10:00
Ben Skeggs 4528416291 drm/nv50: implement gpio set/get routines
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-04-09 10:15:46 +10:00
Ben Skeggs 02faec09b2 drm/nv50: parse/use some more de-magiced parts of gpio table entries
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-04-09 10:15:45 +10:00
Ben Skeggs 2535d71c80 drm/nouveau: store raw gpio table entry in bios gpio structs
And use our own version of the GPIO table for the INIT_GPIO opcode.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-04-09 10:15:44 +10:00
Francisco Jerez 2295e17a4a drm/nv40: Init some tiling-related PGRAPH state.
Fixes garbled 3D on an nv46 card.

Reported-by: Francesco Marella <francesco.marella@gmail.com>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-04-09 10:15:43 +10:00
Marcin Kościelnicki eaeefba154 drm/nv50: Add NVA3 support in ctxprog/ctxvals generator.
Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-04-09 10:15:42 +10:00
Ben Skeggs e60a9df3a8 drm/nv50: another dodgy DP hack
Allows *some* DP cards to keep working in some corner cases that most
people shouldn't hit.  I hit it all the time with development, so this
can stay for now.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-04-09 10:15:41 +10:00
Ben Skeggs a5acac6668 drm/nv50: punt hotplug irq handling out to workqueue
On DP outputs we'll likely end up running vbios init tables here, which
may sleep.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-04-09 10:15:40 +10:00
Ben Skeggs 6f335a7afa drm/nv50: preserve an unknown SOR_MODECTRL value for DP encoders
This value interacts with some registers we don't currently know how to
program properly ourselves.  The default of 5 that we were using matches
what the VBIOS on early DP cards do, but later ones use 6, which would
cause nouveau to program an incorrect mode on these chips.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-04-09 10:15:38 +10:00
Marcin Kościelnicki d327dd4e77 drm/nv50: Allow using the NVA3 new compute class.
Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-04-09 10:15:37 +10:00
Ben Skeggs a1663ed341 drm/nv50: cleanup properly if PDISPLAY init fails
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-04-09 10:15:17 +10:00
Ben Skeggs 78bb35129e drm/nouveau: fixup the init failure paths some more
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-04-09 10:12:30 +10:00
Ben Skeggs 494ab824f1 drm/nv50: fix instmem init on IGPs if stolen mem crosses 4GiB mark
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-04-09 10:12:19 +10:00
Ben Skeggs 2eb92c8007 drm/nv40: add LVDS table quirk for Dell Latitude D620
Should fix:
 https://bugzilla.redhat.com/show_bug.cgi?id=505132
 https://bugzilla.redhat.com/show_bug.cgi?id=543091
 https://bugzilla.redhat.com/show_bug.cgi?id=530425
 https://bugs.edge.launchpad.net/ubuntu/+source/xserver-xorg-video-nouveau/
 +bug/539730

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-04-09 10:12:15 +10:00
Ben Skeggs f3bbb9ccbf drm/nv40: rework lvds table parsing
All indications seem to be that the version 0x30 table should be handled
the same way as 0x40 (as used on G80), at least for the parts that we
currently try use.

This commit cleans up the parsing to make it clearer about what we're
actually trying to achieve, and unifies the 0x30/0x40 parsing.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-04-09 10:12:07 +10:00
Ben Skeggs a76fb4e8ff drm/nouveau: detect vram amount once, and save the value
As opposed to repeatedly reading the amount back from the GPU every
time we need to know the VRAM size.

We should now fail to load gracefully on detecting no VRAM, rather than
something potentially messy happening.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-04-09 10:12:02 +10:00
Ben Skeggs 952eb63543 drm/nouveau: remove some unused members from drm_nouveau_private
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-04-09 10:11:57 +10:00
Francisco Jerez 78ad0f7bf2 drm/nouveau: Make use of TTM busy_placements.
Previously we were filling it the same as "placements", but in some
cases there're valid alternatives that we were ignoring completely.
Keeping a back-up memory type helps on several low-mem situations.

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-04-09 10:11:54 +10:00
Ben Skeggs 40b2a687bd drm/nv50: add more 0x100c80 flushy magic
Fixes the !vbo_fifo path in the 3D driver on certain chipsets.  Still not
really any good idea of what exactly the magic achieves, but it makes
things work.

While we're at it, in the PCIEGART path, flush on unbinding also.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-04-09 10:11:45 +10:00
Ben Skeggs 0c32497198 drm/nv50: fix fbcon when framebuffer above 4GiB mark
This can't actually happen right now, but lets fix it anyway.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-04-09 10:11:25 +10:00
Marcin Kościelnicki 0dd8c3f093 drm/nv50: Fix NEWCTX_DONE flag number
Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-04-09 10:11:20 +10:00
Jerome Glisse 9d87fa2138 drm/ttm: split no_wait argument in 2 GPU or reserve wait
There is case where we want to be able to wait only for the
GPU while not waiting for other buffer to be unreserved. This
patch split the no_wait argument all the way down in the whole
ttm path so that upper level can decide on what to wait on or
not.

[airlied: squashed these 4 for bisectability reasons.]
drm/radeon/kms: update to TTM no_wait splitted argument
drm/nouveau: update to TTM no_wait splitted argument
drm/vmwgfx: update to TTM no_wait splitted argument
[vmwgfx patch: Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>]

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-08 10:21:19 +10:00
James Simmons b1f201980e drm/fb: remove drm_fb_helper_setcolreg
This patch is against the drm-fbdevfix1 branch. It removes the
drm_fb_helper_setcolreg function. The reason is that fb_setcolreg is only
used in the case where fb_setcmap is called and no fb_ops->fb_setcmap is
used. In the drm case we always need a fb_setcmap hook to handle multiple
crtcs so we don't need a fb_setcolreg hook. Please apply.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-08 10:09:50 +10:00
Dave Airlie 4abe35204a drm/kms/fb: use slow work mechanism for normal hotplug also.
a) slow work is always used now for any fbcon hotplug, as its not
   a fast task and is more suited to being ran under slow work.

b) attempt to not do any fbdev changes when X is running as we'll
   just mess it up. This hooks set_par to hopefully do the changes
   once X hands control to fbdev.

This also adds the nouveau/intel hotplug support.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-07 10:30:38 +10:00
Dave Airlie 0b4c0f3f0e drm/kms/fb: separate fbdev connector list from core drm connectors
This breaks the connection between the core drm connector list
and the fbdev connector usage, and allows them to become disjoint
in the future. It also removes the untype void* that was in the
connector struct to support this.

All connectors are added to the fbdev now but this could be
changed in the future.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-07 10:28:01 +10:00
Dave Airlie 8be48d924c drm/kms/fb: move to using fb helper crtc grouping instead of core crtc list
This move to using the list of crtcs in the fb helper and cleans up the
whole picking code, now we store the crtc/connectors we want directly
into the modeset and we use the modeset directly to set the mode.

Fixes from James Simmons and Ben Skeggs.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-07 10:24:56 +10:00
Dave Airlie 386516744b drm/fb: fix fbdev object model + cleanup properly.
The fbdev layer in the kms code should act like a consumer of the kms services and avoid having relying on information being store in the kms core structures in order for it to work.

This patch

a) removes the info pointer/psuedo palette from the core drm_framebuffer structure and moves it to the fbdev helper layer, it also removes the core drm keeping a list of kernel kms fbdevs.
b) migrated all the fb helper functions out of the crtc helper file into the fb helper file.
c) pushed the fb probing/hotplug control into the driver
d) makes the surface sizes into a structure for ease of passing
This changes the intel/radeon/nouveau drivers to use the new helper.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-07 10:21:03 +10:00
Pauli Nieminen bf62acdef8 drm/nouveau: Add ttm page pool debugfs file.
ttm_page_pool file is hooked ttm_page_alloc_debugfs for pool
allocator state.

Signed-off-by: Pauli Nieminen <suokkos@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-06 11:35:58 +10:00
Tejun Heo 336f5899d2 Merge branch 'master' into export-slabh 2010-04-05 11:37:28 +09:00
Dave Airlie 3595be778d Merge branch 'v2.6.34-rc2' into drm-linus 2010-03-31 14:55:14 +10:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Matthew Garrett a19a6ee6ca backlight: Allow properties to be passed at registration
Values such as max_brightness should be set before backlights are
registered, but the current API doesn't allow that. Add a parameter to
backlight_device_register and update drivers to ensure that they
set this correctly.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-03-16 19:47:54 +00:00
Dave Airlie d5e5deddf6 Merge remote branch 'nouveau/for-airlied' into drm-linus
* nouveau/for-airlied:
  drm/nouveau: add module option to disable TV detection
  drm/nouveau: Never evict VRAM buffers to system.
  drm/nv50: fix connector table parsing for some cards
  drm/nv50: add a memory barrier to pushbuf submission
  drm/nouveau: print a message very early during suspend
  drm/nv04-nv40: Fix up the programmed horizontal sync pulse delay.
  drm/nouveau: Gigabyte NX85T connector table lies, it has DVI-I not HDMI
  drm/nouveau: add option to allow override of dcb connector table types
  drm/nv50: Improve PGRAPH interrupt handling.
  drm/nv50: Make ctxprog wait until interrupt handler is done.
  drm/nouveau: Fix fbcon corruption with font width not divisible by 8
  drm/nv50: Remove redundant/incorrect ctxvals initialisation.
2010-03-15 11:07:33 +10:00
Ben Skeggs f405350966 drm/nouveau: add module option to disable TV detection
Intended to be used as a workaround in cases where we falsely detect
that a TV is connected when it's not.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-03-15 09:47:00 +10:00
Francisco Jerez 965cf68e87 drm/nouveau: Never evict VRAM buffers to system.
VRAM->system is a synchronous operation: it involves scheduling a
VRAM->TT DMA transfer and stalling the CPU until it's finished so that
we can unbind the new memory from the translation tables. VRAM->TT can
always be performed asynchronously, even if TT is already full and we
have to move something out of it.

Additionally, allowing VRAM->system behaves badly under heavy memory
pressure because once we run out of TT, stuff starts to be moved back
and forth between VRAM and system, and the TT contents are hardly
renewed.

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-03-15 09:46:52 +10:00
Ben Skeggs d544d623c5 drm/nv50: fix connector table parsing for some cards
The connector table index in the DCB entry for each output type is an
index into the connector table, and does *not* necessarily match up
with what was previously called "index" in the connector table entries
themselves.

Not real sure what that index is exactly, renamed to "index2" as we
still use it to prevent creating multiple TV connectors.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-03-10 16:11:11 +10:00
Maarten Maathuis ce48fa93a6 drm/nv50: add a memory barrier to pushbuf submission
- This is useful for vram pushbuffers that are write combined.
- pre-nv50 has one too (in WRITE_PUT).

Signed-off-by: Maarten Maathuis <madman2003@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-03-10 16:07:35 +10:00
Maarten Maathuis 81441570c9 drm/nouveau: print a message very early during suspend
- In case of suspend lockups it's nice to know it happened in nouveau.

Signed-off-by: Maarten Maathuis <madman2003@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-03-10 16:07:27 +10:00
Francisco Jerez e5ec882cfc drm/nv04-nv40: Fix up the programmed horizontal sync pulse delay.
The calculated values were a little bit off (~16 clocks), the only
effect it could have had is a slightly offset image with respect to
the blob on analog outputs (bug 26790).

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-03-10 16:07:21 +10:00
Ben Skeggs 53c44c3a06 drm/nouveau: Gigabyte NX85T connector table lies, it has DVI-I not HDMI
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-03-10 16:07:14 +10:00
Ben Skeggs da647d5bf3 drm/nouveau: add option to allow override of dcb connector table types
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-03-10 16:07:07 +10:00
Marcin Kościelnicki 304424e17d drm/nv50: Improve PGRAPH interrupt handling.
This makes nouveau recognise and report more kinds of PGRAPH errors, as
well as prevent GPU lockups resulting from some of them.

Lots of guesswork was involved and some part of this is probably
incorrect. Some potential-lockuop situations are handled by just
resetting a whole PGRAPH subunit, which doesn't sound like a "proper"
solution, but seems to work just fine... for now.

Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-03-10 16:07:02 +10:00
Marcin Kościelnicki 3bf777bf0a drm/nv50: Make ctxprog wait until interrupt handler is done.
This will fix races between generated ctxprogs and interrupt handler.

Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-03-10 16:06:57 +10:00
Marcin Kościelnicki c82b88d578 drm/nouveau: Fix fbcon corruption with font width not divisible by 8
NV50 is nice and has a switch that autoaligns stuff for us. Pre-NV50,
we need to align input bitmap width manually.

Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-03-10 16:06:44 +10:00
Marcin Kościelnicki 37000d2757 drm/nv50: Remove redundant/incorrect ctxvals initialisation.
11c/004 offset corresponds to PGRAPH reg 0x400828, and is initialised
earlier anyway by both our ctxprog generator and blob ctxvals. It's
actually incorrect with the generator, since we use different layout
on pre-NVA0.

Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-03-10 16:06:40 +10:00
Jiri Kosina 318ae2edc3 Merge branch 'for-next' into for-linus
Conflicts:
	Documentation/filesystems/proc.txt
	arch/arm/mach-u300/include/mach/debug-macro.S
	drivers/net/qlge/qlge_ethtool.c
	drivers/net/qlge/qlge_main.c
	drivers/net/typhoon.c
2010-03-08 16:55:37 +01:00
Dave Airlie 2f41a7f11c drm/nouveau: fix *staging* driver build with switcheroo off.
This driver is in *staging*. Fix the build with the switcheroo off.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-03 09:20:25 +10:00
Dave Airlie 8edb381d67 vga_switcheroo: fix build on platforms with no ACPI
radeon was always including the atpx code unnecessarily, also core
switcheroo was including acpi headers.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-01 22:21:58 +11:00
Dave Airlie 1c62233508 Merge branch 'gpu-switcher' of /ssd/git//linux-2.6 into drm-next-stage
* 'gpu-switcher' of /ssd/git//linux-2.6:
  vga_switcheroo: initial implementation (v15)
  fb: for framebuffer handover don't exit the loop early.

Conflicts:
	drivers/gpu/drm/i915/i915_dma.c
	drivers/gpu/drm/radeon/Makefile
	drivers/gpu/drm/radeon/radeon.h
2010-03-01 16:22:38 +10:00
Dave Airlie 6a9ee8af34 vga_switcheroo: initial implementation (v15)
Many new laptops now come with 2 gpus, one to be used for low power
modes and one for gaming/on-ac applications. These GPUs are typically
wired to the laptop panel and VGA ports via a multiplexer unit which
is controlled via ACPI methods.

4 combinations of systems typically exist - with 2 ACPI methods.
Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method
ATI/ATI - some ASUS - use ATPX ACPI Method
Intel/Nvidia - - use _DSM ACPI method
Nvidia/Nvidia -  - use _DSM ACPI method.

TODO:
This patch adds support for the ATPX method and initial bits
for the _DSM methods that need to written by someone with
access to the hardware.
Add a proper non-debugfs interface - need to get some proper
testing first.

v2: add power up/down support for both devices
on W500 puts i915/radeon into D3 and cuts power to radeon.

v3: redo probing methods, no DMI list, drm devices call to
register with switcheroo, it tries to find an ATPX method on
any device and once there is two devices + ATPX it inits the
switcher.

v4: ATPX msg handling using buffers - should work on more machines

v5: rearchitect after more mjg59 discussion - move ATPX handling to
    radeon driver.

v6: add file headers + initial nouveau bits (to be filled out).

v7: merge delayed switcher code.

v8: avoid suspend/resume of gpu that is off

v9: rearchitect - mjg59 is always right. - move all ATPX code to
radeon, should allow simpler DSM also proper ATRM handling

v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv

v11: fix bug in resuming Intel for 2nd time.

v12: start fixing up nvidia code blindly.

v13: blindly guess at finishing nvidia code

v14: remove radeon audio hacks - fix up intel resume more like upstream

v15: clean up printks + remove unnecessary igd/dis pointers

mount debugfs

/sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected
 + 2 cards.

DIS - immediate change to discrete
IGD - immediate change to IGD
DDIS - delayed change to discrete
DIGD - delayed change to IGD
ON - turn on not in use
OFF - turn off not in use

Tested on W500 (Intel/ATI) and T500 (Intel/ATI)

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-01 16:20:37 +10:00
Dave Airlie aa71fa3cd5 Merge remote branch 'nouveau/for-airlied' into drm-next-stage
* nouveau/for-airlied: (25 commits)
  drm/nouveau: use ALIGN instead of open coding it
  drm/nouveau: report unknown connector state if lid closed
  drm/nouveau: support version 0x20 displayport tables
  drm/nouveau: Fix noaccel/nofbaccel option descriptions.
  drm/nv50: Implement ctxprog/state generation.
  drm/nouveau: use dcb connector types throughout the driver
  drm/nv50: enable hpd on any connector we know the gpio line for
  drm/nouveau: use dcb connector table for creating drm connectors
  drm/nouveau: construct a connector table for cards that lack a real one
  drm/nouveau: check for known dcb connector types
  drm/nouveau: parse dcb gpio/connector tables after encoders
  drm/nouveau: reorganise bios header, add dcb connector type enums
  drm/nouveau: merge nvbios and nouveau_bios_info
  drm/nouveau: merge parsed_dcb and bios_parsed_dcb into dcb_table
  drm/nouveau: rename parsed_dcb_gpio to dcb_gpio_table
  drm/nouveau: allow retrieval of vbios image from debugfs
  drm/nouveau: fix missing spin_unlock in failure path
  drm/nouveau: fix i2ctable bounds checking
  drm/nouveau: fix nouveau_i2c_find bounds checking
  drm/nouveau: fix pramdac_table range checking
  ...

Conflicts:
	drivers/gpu/drm/nouveau/nouveau_gem.c
2010-03-01 15:41:15 +10:00
Dave Airlie 79fa9eb739 Merge remote branch 'korg/drm-core-next' into drm-next-stage
* korg/drm-core-next:
  drm/ttm: handle OOM in ttm_tt_swapout
  drm/radeon/kms/atom: fix shr/shl ops
  drm/kms: fix spelling of "CLOCK"
  drm/kms: fix fb_changed = true else statement
  drivers/gpu/drm/drm_fb_helper.c: don't use private implementation of atoi()
  drm: switch all GEM/KMS ioctls to unlocked ioctl status.
  Use drm_gem_object_[handle_]unreference_unlocked where possible
  drm: introduce drm_gem_object_[handle_]unreference_unlocked
2010-03-01 15:40:12 +10:00
Matt Turner 3bfc7d22d0 drm/nouveau: use ALIGN instead of open coding it
CC: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:09:46 +10:00
Ben Skeggs b30083bdb9 drm/nouveau: report unknown connector state if lid closed
This is in preference to disconnected.  If there's no other outputs
connected this will cause LVDS to be programmed even with the lid
closed rather than having X fail to start because of no available
outputs.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:09:44 +10:00
Ben Skeggs c52e53fd38 drm/nouveau: support version 0x20 displayport tables
Not entirely identical to 0x21, the per-encoder table header lacks the
third init table pointer.  However, our current parsing of the table
should work just fine.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:09:42 +10:00
Marcin Kościelnicki 81e2d42200 drm/nouveau: Fix noaccel/nofbaccel option descriptions.
Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:09:40 +10:00
Marcin Kościelnicki d5f3c90d4f drm/nv50: Implement ctxprog/state generation.
This removes dependence on external firmware for NV50 generation cards.
If the generated ctxprogs don't work for you for some reason, please
report it.

Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:09:38 +10:00
Ben Skeggs be079e97b5 drm/nouveau: use dcb connector types throughout the driver
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:09:36 +10:00
Ben Skeggs 1157563931 drm/nv50: enable hpd on any connector we know the gpio line for
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:09:34 +10:00
Ben Skeggs 7f612d87f8 drm/nouveau: use dcb connector table for creating drm connectors
This makes this code common to both the nv04 and nv50 paths.

For the moment, we keep the previous behaviour with HDMI/eDP connectors
and report them as DVI-D/DP instead.  This will be fixed once the rest
of the code has been fixed to deal with those types.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:09:32 +10:00
Ben Skeggs dc5bc4ed38 drm/nouveau: construct a connector table for cards that lack a real one
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:09:30 +10:00
Ben Skeggs f66fa771d5 drm/nouveau: check for known dcb connector types
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:09:28 +10:00
Ben Skeggs 54abb5ddae drm/nouveau: parse dcb gpio/connector tables after encoders
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:09:26 +10:00
Ben Skeggs e7cc51c565 drm/nouveau: reorganise bios header, add dcb connector type enums
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:09:23 +10:00
Ben Skeggs 04a39c577f drm/nouveau: merge nvbios and nouveau_bios_info
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:09:21 +10:00
Ben Skeggs 7f245b20e3 drm/nouveau: merge parsed_dcb and bios_parsed_dcb into dcb_table
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:09:19 +10:00
Ben Skeggs a6678b2ace drm/nouveau: rename parsed_dcb_gpio to dcb_gpio_table
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:09:17 +10:00
Ben Skeggs b42861f40f drm/nouveau: allow retrieval of vbios image from debugfs
It's very useful to be able to access this without additional tools for
debugging purposes.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:09:15 +10:00
Luca Barbieri e32b2c883b drm/nouveau: fix missing spin_unlock in failure path
Found by sparse.

Signed-off-by: Luca Barbieri <luca@luca-barbieri.com>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:09:13 +10:00
Marcin Slusarz 761c5a6975 drm/nouveau: fix i2ctable bounds checking
i2c_entries seems to be the number of i2c entries,
so with index equal to this number, we could read
invalid data from i2ctable. Fix it.

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:09:11 +10:00
Marcin Slusarz b762b8ce53 drm/nouveau: fix nouveau_i2c_find bounds checking
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:09:09 +10:00
Marcin Slusarz df31ef4dbd drm/nouveau: fix pramdac_table range checking
get_tmds_index_reg reads some value from stack when mlv happens
to be equal to size of pramdac_table array. Fix it.

Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:09:07 +10:00
Ben Skeggs a1606a9596 drm/nouveau: new gem pushbuf interface, bump to 0.0.16
This commit breaks the userspace interface, and requires a new libdrm for
nouveau to operate again.

The multiple GEM_PUSHBUF ioctls that were present in 0.0.15 for
compatibility purposes are now gone, and replaced with the new ioctl which
allows for multiple push buffers to be submitted (necessary for hw index
buffers in the nv50 3d driver) and relocations to be applied on any buffer.

A number of other ioctls (CARD_INIT, GEM_PIN, GEM_UNPIN) that were needed
for userspace modesetting have also been removed.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
2010-02-25 15:08:44 +10:00
Ben Skeggs d87897d4c8 drm/nv50: make pushbuf dma object cover entire vm
This allows us to submit push buffers from any memtype to the hardware.
We'll need this ability for VRAM index buffers at some point.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:08:33 +10:00
Ben Skeggs 2ccb04ecc7 drm/nouveau: remove PUSHBUF_CAL macro
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:08:31 +10:00
Ben Skeggs 9a391ad8a2 drm/nv50: switch to indirect push buffer controls
PFIFO on G80 and up has a new mode where the main ring buffer is simply a
ring of pointers to indirect buffers containing the actual command/data
packets.  In order to be able to implement index buffers in the 3D driver
we need to be able to submit data-only push buffers right after the cmd
packet header, which is only possible using the new command submission
method.

This commit doesn't make it possible to implement index buffers yet, some
userspace interface changes will be required, but it does allow for
testing/debugging of the hardware-side support in the meantime.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:08:29 +10:00
Maarten Maathuis ff9e5279b1 drm/nouveau: protect channel create/destroy and irq handler with a spinlock
The nv50 pgraph handler (for example) could reenable pgraph fifo access
and that would be bad when pgraph context is being unloaded (we need the
guarantee a ctxprog isn't running).

Signed-off-by: Maarten Maathuis <madman2003@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:07:53 +10:00
Ben Skeggs 6c42966768 drm/nv50: fix vram ptes on IGPs to point at stolen system memory
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-23 13:50:24 +10:00
Ben Skeggs 76befb8c30 drm/nv50: fix instmem binding on IGPs to point at stolen system memory
This also modifies the unused PRAMIN PT entries to be all zeroes, can't
really recall why I used 9/0 initially, just that it didn't work for
some reason.  It was likely masking a bug elsewhere that's since been
fixed.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-23 13:50:21 +10:00
Ben Skeggs 531e77139f drm/nv50: improve vram page table construction
This commit changes nouveau to construct PTEs which look very much like
the ones the binary driver creates.

I presume that filling multiple PTEs identically with length flags and
the physical address of the start of a block of VRAM is a hint to the
memory controller that it need not perform additional page table lookups
for that range of addresses.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-23 13:50:03 +10:00
Ben Skeggs 4c27bd339d drm/nv50: more efficient clearing of gpu page table entries
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-23 13:49:58 +10:00
Ben Skeggs 66b6ebaccb drm/nv50: make nv50_mem_vm_{bind,unbind} operate only on vram
GART is handled elsewhere, no reason to have the code for it here too.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-23 13:41:16 +10:00
Francisco Jerez e7e65caefd drm/nouveau: Fix up pre-nv17 analog load detection.
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-23 13:41:05 +10:00
Francisco Jerez bf929efa56 drm/nouveau: Force TV encoder DPMS reinit after resume.
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-16 11:15:07 +10:00
Ben Skeggs d9184fa97b drm/nouveau: use mutex for vbios lock
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-16 11:14:33 +10:00
Luca Barbieri bc9025bdc4 Use drm_gem_object_[handle_]unreference_unlocked where possible
Mostly obvious simplifications.

The i915 pread/pwrite ioctls, intel_overlay_put_image and
nouveau_gem_new were incorrectly using the locked versions
without locking: this is also fixed in this patch.

Signed-off-by: Luca Barbieri <luca@luca-barbieri.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-11 14:22:34 +10:00
Matthew Garrett 13876c6e5f nouveau: fix state detection with switchable graphics
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-11 09:52:02 +10:00
Marcin Slusarz dd19e44b28 drm/nouveau: move dereferences after null checks
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Maarten Maathuis <madman2003@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-11 09:52:00 +10:00
Maarten Maathuis b1d37aa0aa drm/nv50: make the pgraph irq handler loop like the pre-nv50 version
Unset the bit that indicates that a ctxprog can continue at the end.

Signed-off-by: Maarten Maathuis <madman2003@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-10 08:19:39 +10:00
Maarten Maathuis a87ff62a80 drm/nv50: delete ramfc object after disabling fifo, not before
ramfc is zero'ed upon destruction, so it's safer to do things in the right
order.

Signed-off-by: Maarten Maathuis <madman2003@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-10 08:19:38 +10:00
Maarten Maathuis a51a3bf50d drm/nv50: avoid unloading pgraph context when ctxprog is running
- We need to disable pgraph fifo access before checking the current channel,
  otherwise we could still hit a running ctxprog.
- The writes to 0x400500 are already handled by pgraph->fifo_access and are
  therefore redundant, moreover pgraph fifo access should not be reenabled
  before current context is set as invalid. So remove them altogether.

Signed-off-by: Maarten Maathuis <madman2003@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-10 08:19:36 +10:00
Maarten Maathuis eb1dba0eba drm/nv50: align size of buffer object to the right boundaries.
- In the current situation the padding that is added is dangerous to write
  to, userspace could potentially overwrite parts of another bo.
- Depth and stencil buffers are supposed to be large enough in general so
  the waste of memory should be acceptable.
- Alternatives are hiding the padding from users or splitting vram into 2
  zones.

Signed-off-by: Maarten Maathuis <madman2003@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-10 08:19:34 +10:00
Ben Skeggs 5025b43120 drm/nv50: disregard dac outputs in nv50_sor_dpms()
Fixes DVI+VGA on my 9400, and likely a lot of other configurations that
got broken by the previos DVI-over-DP fix.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-10 08:19:33 +10:00
Ben Skeggs 39c9bfb453 drm/nv50: prevent multiple init tables being parsed at the same time
With DVI and DP plugged, the DVI clock change interrupts being run can
cause DP link training to fail.  This adds a spinlock around init table
parsing to prevent this.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-10 08:19:18 +10:00
Daniel Mack 3ad2f3fbb9 tree-wide: Assorted spelling fixes
In particular, several occurances of funny versions of 'success',
'unknown', 'therefore', 'acknowledge', 'argument', 'achieve', 'address',
'beginning', 'desirable', 'separate' and 'necessary' are fixed.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Joe Perches <joe@perches.com>
Cc: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-09 11:13:56 +01:00
Ben Skeggs 1ee7698fc3 drm/nouveau: make dp auxch xfer len check for reads only
Writes don't return a count, and adding the check broke native DP.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-09 12:50:43 +10:00
Ben Skeggs e235c1f3e1 drm/nv40: make INIT_COMPUTE_MEM a NOP, just like nv50
It appears we aren't required to do memory sizing ourselves on nv40
either.  NV40 init tables read a strap from PEXTDEV_BOOT_0 into a
CRTC register, and then later use that value to select a memory
configuration (written to PFB_CFG0, just like INIT_COMPUTE_MEM on
earlier cards) with INIT_IO_RESTRICT_PROG.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-09 12:50:35 +10:00
Marcin Kościelnicki 9967b9481d drm/nouveau: Add proper vgaarb support.
Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-09 12:50:27 +10:00
Marcin Kościelnicki 126b544056 drm/nouveau: Fix fbcon on mixed pre-NV50 + NV50 multicard.
We used single shared fbops struct and patched it at fb init time with
pointers to the right variant. On mixed multicard, this meant that
it was either sending NV50-style commands to all cards, or NV04-style
commands to all cards.

Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-09 12:50:14 +10:00
Julia Lawall 7dad9ef6d9 drivers/gpu/drm/nouveau/nouveau_grctx.c: correct NULL test
Test the just-allocated value for NULL rather than some other value.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression x,y;
statement S;
@@

x = \(kmalloc\|kcalloc\|kzalloc\)(...);
(
if ((x) == NULL) S
|
if (
-   y
+   x
       == NULL)
 S
)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: David Airlie <airlied@linux.ie>
Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-09 12:49:55 +10:00
Luca Barbieri f0fbe3eb5f drm/nouveau: call ttm_bo_wait with the bo lock held to prevent hang
nouveau_gem_ioctl_cpu_prep calls ttm_bo_wait without the bo lock held.
ttm_bo_wait unlocks that lock, and so must be called with it held.

Currently this bug causes libdrm nouveau_bo_busy() to hang the machine.

Signed-off-by: Luca Barbieri <luca at luca-barbieri.com>
Acked-by: Maarten Maathuis <madman2003@gmail.com>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-09 12:49:09 +10:00
Francisco Jerez 139295b671 drm/nouveau: Fixup semaphores on pre-nv50 cards.
Apparently, they generate a PFIFO interrupt each time one of the
semaphore methods is executed if its ctxdma wasn't manually marked as
valid. This patch makes it flip the valid bit in response to the
DMA_SEMAPHORE method (which triggers the IRQ even for a valid ctxdma).

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-09 12:48:56 +10:00
Marcin Kościelnicki 69c9700b54 drm/nouveau: Add getparam to get available PGRAPH units.
On nv50, this will be needed by applications using CUDA to know
how much stack/local memory to allocate.

Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-09 12:48:08 +10:00
Marcin Kościelnicki a32ed69d7b drm/nouveau: Add module options to disable acceleration.
noaccel=1 disables all acceleration and doesn't even attempt
initialising PGRAPH+PFIFO, nofbaccel=1 only makes fbcon unaccelerated.

Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-09 12:47:59 +10:00
Ben Skeggs f927b8907c drm/nouveau: fix non-vram notifier blocks
Due to a thinko, these were previously forced to VRAM even if we allocated
them in GART.

This commit fixes that bug, but keeps the previous behaviour of using VRAM
by default until it's been tested properly across more chipsets.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-09 12:47:52 +10:00