Following a hang and reset, we know that the engine is idle and all
context state has been saved or lost. Consequently, we know that the
engine is no longer referencing the last context and we can relinquish
our tracking.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170212172002.23072-5-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
The signal threads may be running concurrently with the GPU reset. The
completion from the GPU run asynchronous with the reset and two threads
may see different snapshots of the state, and the signaler may mark a
request as complete as we try to reset it. We don't tolerate 2 different
views of the same state and complain if we try to mark a request as
failed if it is already complete. Disable the signal threads during
reset to prevent this conflict (even though the conflict implies that
the state we resetting to is invalid, we have already made our
decision!).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99733
References: https://bugs.freedesktop.org/show_bug.cgi?id=99671
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170212172002.23072-4-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Disabling the tasklet leaves it if scheduled on the ready to run list
until it is re-enabled. This will leave the ksoftird thread spinning
until satisfied. To prevent this situation on starting the GPU reset, we
want to kill the tasklet first and then disable. The same problem will
arise when a tasklet is scheduled from another device, so a better
solution is required for the general case.
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 1f7b847d72 ("drm/i915: Disable engine->irq_tasklet around resets")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170212172002.23072-3-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
As i915_gem_reset_finish() undoes the steps from
i915_gem_reset_prepare() to leave the system in a fully-working state,
e.g. to be able to free the breadcrumb signal threads, make sure that we
always call it even on the error path.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170212172002.23072-2-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
After a brief discussion, we settled on a naming convention for the
conditional GEM debugging data that should be clearer to the casual
user: GEM_DEBUG
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170207102319.10910-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
When updating the bookkeeping following the reset, we need the seqno to
be coherent on the CPU prior to trusting its result for deciding whether
any request is completed. We need the irq_barrier before we start making
these decisions, i.e. in reset_prepare.
References: https://bugs.freedesktop.org/show_bug.cgi?id=99733
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170210185214.23463-1-chris@chris-wilson.co.uk
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
As dmabufs may live beyond the PCI device removal, we need to flush the
freed object worker on device release, and include a warning in case
there is a leak.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170210163523.17533-3-chris@chris-wilson.co.uk
We may unload the PCI device before all users (such as dma-buf) are
completely shutdown. This may leave VMA in the global GTT which we want
to revoke, whilst keeping the objects themselves around to service the
dma-buf.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170210163523.17533-2-chris@chris-wilson.co.uk
We may need to keep our memory management alive after we have unloaded
the physical pci device. For example, if we have exported an object via
dmabuf, that will keep the device around but the pci device may be
removed before the dmabuf itself is released, use of the pci hardware
will be revoked, but the memory and object management needs to persist
for the dmabuf.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170210163523.17533-1-chris@chris-wilson.co.uk
This adds a file in i915's debugfs directory that allows userspace to
manually control HPD storm detection. This is mainly for hotplugging
tests, where we might want to test HPD storm functionality or disable
storm detection to speed up hotplugging tests without breaking anything.
Changes since v1:
- Make HPD storm interval configurable
- Misc code cleanup
Signed-off-by: Lyude <lyude@redhat.com>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Until recently vlv_steal_power_sequencer() wasn't being called for
normal DP ports, and hence it could assert that it should only be
called for pipe A and B (since pipe C doesn't support eDP). However
that changed when we started to consider normal DP ports as well when
choosing a PPS. So we will now get spurious warnings when
vlv_steal_power_sequencer() does get called for pipe C. Avoid this by
moving the WARN down into vlv_detach_power_sequencer() where this
assertion should still hold.
Cc: Imre Deak <imre.deak@intel.com>
Cc: stable@vger.kernel.org
Fixes: 9f2bdb006a ("drm/i915: Prevent PPS stealing from a normal DP port on VLV/CHV")
References: https://bugs.freedesktop.org/show_bug.cgi?id=95287
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170208175254.10958-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Chris Wilson needs the new drm_driver->release callback to make sure
the shiny new dma-buf testcases don't oops the driver on unload.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Now that we have fast top-down insertion into the drm_mm, we can use it
for frequent runtime operations like insertion of the context object,
whereas before we limited it to the one-off insertion of the pinned
kernel context. Keeping the active context objects out of the mappable
region of the global GTT (except under memory pressure) improves our
ability to allocate mappable aperture region without triggering a GPU
stall.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170210101422.1598-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
The function intel_ddi_get_link_dpll() was added in f169660ed4
("drm/i915/dp: Add a standalone function to obtain shared dpll for
HSW/BDW/SKL/BXT") to "allow for the implementation of a platform
neutral upfront link training function", but such implementation
never landed.
So remove that function and clean up the exported shared DPLL interface.
Fixes: f169660ed4 ("drm/i915/dp: Add a standalone function to obtain shared dpll for HSW/BDW/SKL/BXT")
Cc: Durgadoss R <durgadoss.r@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484310032-1863-1-git-send-email-ander.conselvan.de.oliveira@intel.com
There are currently 30 power domains, which puts us pretty close to the
limit with 32 bit masks. Prepare for the future and increase the limit
to 64 bit.
v2: Rebase
v3: s/unsigned long long/u64/ (Joonas)
Allow the 64th bit of the mask to be used. (Joonas)
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170209093121.24410-1-ander.conselvan.de.oliveira@intel.com
Once the address space has been created (using 3 or 4 levels of page
tables), we should use that to program the appropriate type into the
contexts. This gives us the flexibility to handle different types of
address spaces at runtime.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170209144036.23664-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
i915 is pretty much feature complete. Support for atomic i915-specific
connector properties is still missing; those properties can (for now)
only be set through the legacy ioctl.
ILK style watermarks and gen9+ watermarks are handled atomically,
and nonblocking modesets work. FBC has also been made to work with
atomic.
gen4x- and vlv/chv watermarks still need to be fixed, so disable atomic
by default there for now.
Flip the switch!!
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Lyude <cpaul@redhat.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1486021302-24910-1-git-send-email-maarten.lankhorst@linux.intel.com
[mlankhorst: Fix checkpatch warning about extra space in match_info]
Acked-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Lyude <lyude@redhat.com>
The aliasing_ppgtt is just a container for the HW context that mirrors
the global gtt. It should never be used directly, so assert if we make
the mistake of trying to allocate a VMA for it.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170209111933.12420-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
We first wait for a request to be submitted to hw and assigned a seqno,
before we can wait for the hw to signal completion (otherwise we don't
know the hw id we need to wait upon). Whilst waiting for the request to
be submitted, we may exceed the user's timeout and need to propagate the
error back.
v2: Make ETIME into an error from wait_for_execute for consistent exit
handling.
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 4680816be3 ("drm/i915: Wait first for submission, before waiting for request completion")
Testcase: igt/gem_wait/basic-await
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.10-rc1+
Cc: stable@vger.kernel.org
Link: http://patchwork.freedesktop.org/patch/msgid/20170208181238.7232-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
This patch makes PPGTT page table non-shrinkable when using aliasing PPGTT
mode. It's just a temporary solution for making GVT-g work.
Fixes: 2ce5179fe8 ("drm/i915/gtt: Free unused lower-level page tables")
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhiyuan Lv <zhiyuan.lv@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1486559013-25251-2-git-send-email-zhi.a.wang@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.10-rc1+
Cc: stable@vger.kernel.org
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
This shaves a few lines from intel_dp_init_connector() and will serve as
a good place to add other port specific information in a follow up
patch.
While at it, convert BUG() to MISSING_CASE() in the default case.
v2: s/BUG/MISSING_CASE. (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170203140316.20792-2-ander.conselvan.de.oliveira@intel.com
When we restart the engines, and we have active requests, a request on
the first engine may complete and queue a request to the second engine
before we try to restart the second engine. That queueing of the
request may race with the engine to restart, and so may corrupt the
current state. Disabling the engine->irq_tasklet prevents the two paths
from writing into ELSP simultaneously (and modifyin the execlists_port[]
at the same time).
Fixes: 821ed7df6e ("drm/i915: Update reset path to fix incomplete requests")
Testcase: igt/gem_exec_fence/await-hang
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170208143033.11651-3-chris@chris-wilson.co.uk
Currently we do a reset prepare/finish around the call to reset the GPU,
but it looks like we need a later stage after the hw has been
reinitialised to allow GEM to restart itself. Start by splitting the 2
GEM phases into 3:
prepare - before the reset, check if GEM recovered, then stop GEM
reset - after the reset, update GEM bookkeeping
finish - after the re-initialisation following the reset, restart GEM
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170208143033.11651-2-chris@chris-wilson.co.uk
Just a simple refactor to move a loop and some support code out of
i915_gem_init_hw(). This is in preparation for avoiding a race between
the tasklet writing to ELSP whilst simultaneously being written by
engine->init_hw() following a GPU reset.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170208143033.11651-1-chris@chris-wilson.co.uk
Since to unbind an object, we may need a powered up device to access the
GTT entries, we only shrink bound objects if awake. Callers to
i915_gem_shrink_all() had to take this into account and take the rpm
wakeref, but we can move this wakeref into the shrink_all itself for
convenience and making the function live up to its name.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170208104710.18089-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
With the cdclk state, all the .modeset_commit_cdclk() hooks are
now pointless wrappers. Let's replace them with just a .set_cdclk()
function pointer. However let's wrap that in a small helper that
does the state comparison and prints a unified debug message across
all platforms. We didn't even have the debug print on all platforms
previously. This reduces the clutter in intel_atomic_commit_tail() a
little bit.
v2: Wrap .set_cdclk() in intel_set_cdclk()
v3: Add kernel-docs
v4: Deal with IS_GEN9_BC()
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126195201.32638-1-ville.syrjala@linux.intel.com
The hack to grab the pipe A power domain around VLV/CHV cdclk
programming has surely outlived its usefulness. We should be
holding sufficient power domains during any modeset, so let's
just nuke this hack.
v2: Fix typo in commit message (Ander)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170120182205.8141-13-ville.syrjala@linux.intel.com
Move the vlv_program_pfi_credits() into vlv_set_cdclk() and
chv_set_cdclk() so that we can neuter vlv_modeset_commit_cdclk().
v2: Do the PFI programming after cdclk readout since it currently
depends on the readout to fill dev_priv->cdclk.hw
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126195719.309-1-ville.syrjala@linux.intel.com
Rather than passing all the different parameters (cdclk,vco so
far) sparately to the set_cdclk() functions, just pass the
entire cdclk state.
v2: Deal with churn
v3: Drop the usless .ref assignment (Ander)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170120182205.8141-11-ville.syrjala@linux.intel.com
The current dev_cdclk vs. cdclk vs. atomic_cdclk_freq is quite a mess.
So here I'm introducing the "actual" and "logical" naming for our
cdclk state. "actual" is what we'll bash into the hardware and "logical"
is what everyone should use for state computaion/checking and whatnot.
We'll track both using the intel_cdclk_state as both will need other
differing parameters than just the actual cdclk frequency.
While doing that we can at the same time unify the appearance of the
.modeset_calc_cdclk() implementations a little bit.
v2: Commit dev_priv->cdclk.actual since that already has the
new state by the time .modeset_commit_cdclk() is called.
v3: s/locical/logical/ and improve the docs a bit
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170120182205.8141-9-ville.syrjala@linux.intel.com
Introduce intel_cdclk state which for now will track the cdclk
frequency, the vco frequency and the reference frequency (not sure we
want the last one, but I put it there anyway). We'll also make the
.get_cdclk() function fill out this state structure rather than
just returning the current cdclk frequency.
One immediate benefit is that calling .get_cdclk() will no longer
clobber state stored under dev_priv unless ex[plicitly told to do
so. Previously it clobbered the vco and reference clocks stored
there on some platforms.
We'll expand the use of this structure to actually precomputing the
state and whatnot later.
v2: Constify intel_cdclk_state_compare()
v3: Document intel_cdclk_state_compare()
v4: Deal with i945gm_get_cdclk()
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170207183345.19763-1-ville.syrjala@linux.intel.com
Let's try to shrink intel_display.c a bit by moving the cdclk/rawclk
stuff to a new file. It's all reasonably self contained so we don't
even have to add that many non-static symbols.
We'll also take the opportunity to shuffle around the functions a bit
to get things in a more consistent order based on the platform.
v2: Add kernel-docs (Ander)
v3: Deal with IS_GEN9_BC()
v4: Deal with i945gm_get_cdclk()
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170207183305.19656-1-ville.syrjala@linux.intel.com
Let's clean up the mess we have in the if ladder that assigns the
.get_cdclk() hooks. The grouping of the platforms by the function
results in a thing that's not really legible, so let's do it the
other way around and order the if ladder by platform and duplicate
whatever assignments we need.
To further avoid confusion with the function names let's rename
them to just fixed_<freq>_get_cdclk(). The other option would
be to duplicate the functions entirely but it seems quite
pointless to do that since each one just returns a fixed value.
v2: Deal with i945gm_get_cdclk()
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170207183226.19537-1-ville.syrjala@linux.intel.com
Rename the .get_display_clock_speed() hook to .get_cdclk().
.get_cdclk() is more specific (which clock) and it's much
shorter.
v2: Deal with IS_GEN9_BC()
v3: Deal with i945gm_get_display_clock_speed()
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170207183146.19420-1-ville.syrjala@linux.intel.com
ilk_max_pixel_rate() will now give the "correct" pixel rate for all
platforms, so let's rename it to intel_max_pixel_rate() and kill
off intel_mode_max_pixclk().
v2: Fix typo in commit message (Ander)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170120182205.8141-3-ville.syrjala@linux.intel.com
Rather than recomputing the pipe pixel rate on demand everywhere, let's
just stick the precomputed value into the crtc state.
v2: Rebase due to min_pixclk[] code movement
Document the new pixel_rate struct member (Ander)
Combine vlv/chv with bdw+ in intel_modeset_readout_hw_state()
v3: Fix typos in commit message (David)
Cc: Ander Conselvan De Oliveira <conselvan2@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126195031.32343-1-ville.syrjala@linux.intel.com
Currently to establish whether GuC firmware has been loaded or
submission enabled (default DRM log level), one has to detect
the absence of the message saying that the load has been skipped
and infer the opposite.
It is better to log the fact GuC firmware has been loaded and/or
submission enabled explicitly to avoid any guesswork when looking
at the logs.
v2:
* Log message polish. (Chris)
* Future proof by reporting found firmware version. (Michal)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> (v1)
Link: http://patchwork.freedesktop.org/patch/msgid/1486457425-32548-1-git-send-email-tvrtko.ursulin@linux.intel.com
"BIT(max) - 1" will overflow when max = 32, and GCC will complain.
We already have GENMASK for generating the mask, use it!
v2: Majestic off by one spotted (Chris)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
We're using non-canonical addresses in drm_mm, and we're making sure that
userspace is using canonical addressing - both in case of softpin
(verifying incoming offset) and when relocating (converting to canonical
when updating offset returned to userspace).
Unfortunately when considering the need for relocations, we're comparing
offset from userspace (in canonical form) with drm_mm node (in
non-canonical form), and as a result, we end up always relocating if our
offsets are in the "problematic" range.
Let's always convert the offsets to avoid the performance impact of
relocations.
Fixes: a5f0edf63b ("drm/i915: Avoid writing relocs with addresses in non-canonical form")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Reported-by: Michał Pyrzowski <michal.pyrzowski@intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170207195559.18798-1-michal.winiarski@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Following a reset, the context and page directory registers are lost.
However, the queue of requests that we resubmit after the reset may
depend upon them - the registers are restored from a context image, but
that restore may be inhibited and may simply be absent from the request
if it was in the middle of a sequence using the same context. If we
prime the CCID/PD registers with the first request in the queue (even
for the hung request), we prevent invalid memory access for the
following requests (and continually hung engines).
v2: Magic BIT(8), reserved for future use but still appears unused.
v3: Some commentary on handling innocent vs guilty requests
v4: Add a wait for PD_BASE fetch. The reload appears to be instant on my
Ivybridge, but this bit probably exists for a reason.
Fixes: 821ed7df6e ("drm/i915: Update reset path to fix incomplete requests")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170207152437.4252-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
The goal of the WARN was to catch when we are still actively using the
fence as we go into the runtime suspend. However, the reg->pin_count is
too coarse as it does not distinguish between exclusive ownership of the
fence register from activity.
I've not improved on the WARN, nor have we captured this WARN in an
exact igt, but it is showing up regularly in the wild:
[ 1915.935332] WARNING: CPU: 1 PID: 10861 at drivers/gpu/drm/i915/i915_gem.c:2022 i915_gem_runtime_suspend+0x116/0x130 [i915]
[ 1915.935383] WARN_ON(reg->pin_count)[ 1915.935399] Modules linked in:
snd_hda_intel i915 drm_kms_helper vgem netconsole scsi_transport_iscsi fuse vfat fat x86_pkg_temp_thermal coretemp intel_cstate intel_uncore snd_hda_codec_hdmi snd_hda_codec_generic snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mei_me mei serio_raw intel_rapl_perf intel_pch_thermal soundcore wmi acpi_pad i2c_algo_bit syscopyarea sysfillrect sysimgblt fb_sys_fops drm r8169 mii video [last unloaded: drm_kms_helper]
[ 1915.935785] CPU: 1 PID: 10861 Comm: kworker/1:0 Tainted: G U W 4.9.0-rc5+ #170
[ 1915.935799] Hardware name: LENOVO 80MX/Lenovo E31-80, BIOS DCCN34WW(V2.03) 12/01/2015
[ 1915.935822] Workqueue: pm pm_runtime_work
[ 1915.935845] ffffc900044fbbf0 ffffffffac3220bc ffffc900044fbc40 0000000000000000
[ 1915.935890] ffffc900044fbc30 ffffffffac059bcb 000007e6044fbc60 ffff8801626e3198
[ 1915.935937] ffff8801626e0000 0000000000000002 ffffffffc05e5d4e 0000000000000000
[ 1915.935985] Call Trace:
[ 1915.936013] [<ffffffffac3220bc>] dump_stack+0x4f/0x73
[ 1915.936038] [<ffffffffac059bcb>] __warn+0xcb/0xf0
[ 1915.936060] [<ffffffffac059c4f>] warn_slowpath_fmt+0x5f/0x80
[ 1915.936158] [<ffffffffc052d916>] i915_gem_runtime_suspend+0x116/0x130 [i915]
[ 1915.936251] [<ffffffffc04f1c74>] intel_runtime_suspend+0x64/0x280 [i915]
[ 1915.936277] [<ffffffffac0926f1>] ? dequeue_entity+0x241/0xbc0
[ 1915.936298] [<ffffffffac36bb85>] pci_pm_runtime_suspend+0x55/0x180
[ 1915.936317] [<ffffffffac36bb30>] ? pci_pm_runtime_resume+0xa0/0xa0
[ 1915.936339] [<ffffffffac4514e2>] __rpm_callback+0x32/0x70
[ 1915.936356] [<ffffffffac451544>] rpm_callback+0x24/0x80
[ 1915.936375] [<ffffffffac36bb30>] ? pci_pm_runtime_resume+0xa0/0xa0
[ 1915.936392] [<ffffffffac45222d>] rpm_suspend+0x12d/0x680
[ 1915.936415] [<ffffffffac69f6d7>] ? _raw_spin_unlock_irq+0x17/0x30
[ 1915.936435] [<ffffffffac0810b8>] ? finish_task_switch+0x88/0x220
[ 1915.936455] [<ffffffffac4534bf>] pm_runtime_work+0x6f/0xb0
[ 1915.936477] [<ffffffffac074353>] process_one_work+0x1f3/0x4d0
[ 1915.936501] [<ffffffffac074678>] worker_thread+0x48/0x4e0
[ 1915.936523] [<ffffffffac074630>] ? process_one_work+0x4d0/0x4d0
[ 1915.936542] [<ffffffffac074630>] ? process_one_work+0x4d0/0x4d0
[ 1915.936559] [<ffffffffac07a2c9>] kthread+0xd9/0xf0
[ 1915.936580] [<ffffffffac07a1f0>] ? kthread_park+0x60/0x60
[ 1915.936600] [<ffffffffac69fe62>] ret_from_fork+0x22/0x30
In the case the register is pinned, it should be present and we will
need to invalidate them to be restored upon resume as we cannot expect
the owner of the pin to call get_fence prior to use after resume.
Fixes: 7c108fd8fe ("drm/i915: Move fence cancellation to runtime suspend")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98804
Reported-by: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Imre Deak <imre.deak@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.10-rc1+
Link: http://patchwork.freedesktop.org/patch/msgid/20170203125717.8431-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Alongside the hw capabilities, it is useful to know which of those have
been overridden by the user setting module parameters.
v2: Use __always_inline and BUILD_BUG magic
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170206213608.31328-4-chris@chris-wilson.co.uk
They include useful material such as what mode the VM address space is
running in, what submission mode, extra quirks, etc.
v2: Undef the right macro, use type specific pretty printers
v3: Use strcmp(TYPENAME) rather than creating per-type pretty printers
v4: Use __always_inline to force GCC to eliminate the calls to strcmp and
generate the right call to seq_printf for each parameter.
v5: With the strcmp elimination, we can now use BUILD_BUG to ensure
there are no unhandled types, also use __builtin_strcmp to make it look
even more magic.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170206213608.31328-3-chris@chris-wilson.co.uk
The alpha_support module option can only take one of two values, so
assign it to a boolean type. The only advantage is in pretty printing
via /sys/module/i915/parameters/alpha_support and elsewhere.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170206213608.31328-2-chris@chris-wilson.co.uk
I want to print the struct from the error state and so would like to use
the existing struct definition as the template ala DEV_INFO*
v2: Use MEMBER() rather than p().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170206213608.31328-1-chris@chris-wilson.co.uk
In commit 86aa7e760a ("drm/i915: Assert that the context-switch
completion matches our context") I added a read to the irq tasklet
handler that compared the on-chip status with that of our sw tracking,
using an unguarded read of the request pointer to get the context and
beyond. Whilst we hold a reference to the request, we do not hold
anything on the context and if we are unlucky it may be reaped from a
second thread retiring the request (since it may retire the request as
soon as the breadcrumb is complete, even before we finish processing the
context switch) as we try to read from the context pointer.
Avoid the racy read from underneath the request by storing the expected
result in the execlist_port[].
v2: Include commentary about port[].request being unprotected.
Fixes: 86aa7e760a ("drm/i915: Assert that the context-switch completion matches our context")
Reported-by: Mika Kuoppala <mika.kuoppala@intel.com>
Testcase: igt/gem_ctx_create
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170206170502.30944-2-chris@chris-wilson.co.uk
It is required that the caller declare the exact number of dwords they
wish to write into the ring. This is required for two reasons, we need
to allocate sufficient space for the entire command packet and we need
to be sure that the contents are completely written to avoid executing
stale data. The current interface requires for any bug to be caught in
review, the reader has to carefully count the number of
intel_ring_emit() between intel_ring_begin() and intel_ring_advance().
If we record the end of the packet of each intel_ring_begin() we can
also have CI check for us.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170206170502.30944-1-chris@chris-wilson.co.uk
execlist_update_context() will try to update PDPs in a context before a
ELSP submission only for full PPGTT mode, while PDPs was populated during
context initialization. Now the latter code path is removed. Let
execlist_update_context() also cover !FULL_PPGTT mode.
Fixes: 34869776c7 ("drm/i915: check ppgtt validity when init reg state")
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhiyuan Lv <zhiyuan.lv@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1486377436-15380-1-git-send-email-zhi.a.wang@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
To be consistent with the recent change to enable hotplug detection
early on GEN9 platforms do the same on all non-GMCH platforms starting
from GEN5. On GMCH platforms enabling detection without interrupts isn't
trivial, since AUX and HPD have a shared interrupt line. It could be
done there too by using a SW interrupt mask, but I punt on that for now.
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1485509961-9010-5-git-send-email-imre.deak@intel.com
This effectively reverts
commit 489375c866
Author: Imre Deak <imre.deak@intel.com>
Date: Mon Oct 24 19:33:31 2016 +0300
drm/i915/lspcon: Add workaround for resuming in PCON mode
The workaround was added without considering that HPD is low during
the failed AUX transfers the WA fixed. Since the previous patch we
wait for HPD to get asserted. My tests also show that this happens
_after_ the DPCD reads start to return correct values. This
suggests that we don't need this WA any more, let's try to remove
it to reduce the clutter.
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1485509961-9010-4-git-send-email-imre.deak@intel.com
During system resume time initialization the HPD level on LSPCON ports
can stay low for an extended amount of time, leading to failed AUX
transfers and LSPCON initialization. Fix this by waiting for HPD to get
asserted.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99178
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1485509961-9010-3-git-send-email-imre.deak@intel.com
For LSPCON resume time initialization we need to sample the
corresponding pin's HPD level, but this is only available when HPD
detection is enabled. Currently we enable detection only when enabling
HPD interrupts which is too late, so bring the enabling of detection
earlier.
This is needed by the next patch.
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1485509961-9010-2-git-send-email-imre.deak@intel.com
As we now mark the reserved hole (drm_mm.head_node) with the special
UNEVICTABLE color, we can use the page coloring to avoid prefetching of
the CS beyond the end of the GTT.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170206084547.27921-3-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
The drm_mm range manager (within i915_address_space) uses a special
drm_mm_node that excludes the unavailable range (beyond the end of the
drm_mm). However, we play games with the global GTT to use the head_node
to exclude the tail page but tell ourselves that the whole range is
available. This causes an issue when we try to evict using the full
range of the global GTT which is wider than the drm_mm, resulting in
complete confusion and catastrophe. One way to resolve this would be to
use a reserved node to exclude the guard page, or we can treat the
drm_mm's head_node as our guard page and assign it the appropriate
colour.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170206084547.27921-2-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
I incorrectly converted the exclusion of the last 4096 bytes (that avoids
any potential prefetching past the end of the GTT) to PAGE_SIZE and not
to I915_GTT_PAGE_SIZE as it should be.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170206084547.27921-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
If we have any residual freed atomic state from earlier commits, flush
the freed list after performing the current modeset. This prevents the
freed list from ever-growing if userspace manages to starve the kernel
threads (i.e. we are never able to run our free state worker and
eventually the system may even oom).
Fixes: eb955eee27 ("drm/i915: Move atomic state free from out of fence release")
Testcase: igt/kms_cursor/legacy/all-pipes-single-bo
Reported-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170202204741.18231-1-chris@chris-wilson.co.uk
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
The only difference for the more recent of those macros is the version
of the *_reg_<read/write>_fw_domains function. Passing the function
prefix in allows us to re-use the same macro to generate functions for
different GENs and will make it easier to add new accessors in the future
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1486171409-21542-1-git-send-email-daniele.ceraolospurio@intel.com
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Fences are creted/checked before the pm ref is taken, so if we jump to
pre_mutex_err we will uncorrectly call intel_runtime_pm_put.
v2: Massage unwind error paths
Fixes: fec0445caa (drm/i915: Support explicit fencing for execbuf)
Testcase: igt/gem_exec_params
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1486161930-11764-1-git-send-email-daniele.ceraolospurio@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
We now have partial VMA support to break large objects into fence sized
regions and no longer have to restrict tiling to small objects on gen2/3
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170203115036.24743-2-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The current tail breaks the pattern of if (check) return false, which
can catch the reader out. If we move the gen2/3 power-of-two test into
the earlier gen2/3 branch, we can eliminate the contrary tail.
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170203115036.24743-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
In commit 957870f934 ("drm/i915: Split out i915_gem_object_set_tiling()"),
I swapped an alignment check for IS_ALIGNED and in the process removed
the less-than check. That check turns out to be important as it was the
only rejection for stride == 0. Tvrtko did spot it, but I was
overconfident in the IS_ALIGNED() conversion.
Fixes: 957870f934 ("drm/i915: Split out i915_gem_object_set_tiling()")
Testcase: igt/gem_tiling_max_stride
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170203105652.27819-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Add the missing INTEL_OUTPUT_DP_MST case in bxt_get_dpll()
to correctly initialize the crtc_state and port plls when
link training a DP MST monitor on BXT/APL devices.
Fixes: a277ca7dc0 ("drm/i915: Split bxt_ddi_pll_select()")
Bugs: https://bugs.freedesktop.org/show_bug.cgi?id=99572
Reviewed-by: Cooper Chiou <cooper.chiou@intel.com>
Reviewed-by: Gary C Wang <gary.c.wang@intel.com>
Reviewed-by: Ciobanu, Nathan D <nathan.d.ciobanu@intel.com>
Reviewed-by: Herbert, Marc <marc.herbert@intel.com>
Reviewed-by: Bride, Jim <jim.bride@intel.com>
Reviewed-by: Navare, Manasi D <manasi.d.navare@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: Lee, Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1486096329-6255-1-git-send-email-shawn.c.lee@intel.com
Now that we have selftests in place exercising truly huge allocations
we will start to hit the 512GB warning, so now seems like a good time to
remove this user-triggerable WARN.
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1486047300-13198-1-git-send-email-matthew.auld@intel.com
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
The drm_mm range manager claimed to support top-down insertion, but it
was neither searching for the top-most hole that could fit the
allocation request nor fitting the request to the hole correctly.
In order to search the range efficiently, we create a secondary index
for the holes using either their size or their address. This index
allows us to find the smallest hole or the hole at the bottom or top of
the range efficiently, whilst keeping the hole stack to rapidly service
evictions.
v2: Search for holes both high and low. Rename flags to mode.
v3: Discover rb_entry_safe() and use it!
v4: Kerneldoc for enum drm_mm_insert_mode.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com> # vmwgfx
Reviewed-by: Lucas Stach <l.stach@pengutronix.de> #etnaviv
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170202210438.28702-1-chris@chris-wilson.co.uk
If we fail to dma-map the object, the most common cause is lack of space
inside the SW-IOTLB due to fragmentation. If we recreate the_sg_table
using segments of PAGE_SIZE (and single page allocations), we may succeed
in remapping the scatterlist.
First became a significant problem for the mock selftests after commit
5584f1b1d7 ("drm/i915: fix i915 running as dom0 under Xen") increased
the max_order.
Fixes: 920cf41949 ("drm/i915: Introduce an internal allocator for disposable private objects")
Fixes: 5584f1b1d7 ("drm/i915: fix i915 running as dom0 under Xen")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170202132721.12711-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.10-rc1+
Instead of receiving the num_crts as a parameter, we can read it
directly from the mode_config structure. I audited the drivers that
invoke this helper and I believe all of them initialize the mode_config
struct accordingly, prior to calling the fb_helper.
I used the following coccinelle hack to make this transformation, except
for the function headers and comment updates. The first and second
rules are split because I couldn't find a way to remove the unused
temporary variables at the same time I removed the parameter.
// <smpl>
@r@
expression A,B,D,E;
identifier C;
@@
(
- drm_fb_helper_init(A,B,C,D)
+ drm_fb_helper_init(A,B,D)
|
- drm_fbdev_cma_init_with_funcs(A,B,C,D,E)
+ drm_fbdev_cma_init_with_funcs(A,B,D,E)
|
- drm_fbdev_cma_init(A,B,C,D)
+ drm_fbdev_cma_init(A,B,D)
)
@@
expression A,B,C,D,E;
@@
(
- drm_fb_helper_init(A,B,C,D)
+ drm_fb_helper_init(A,B,D)
|
- drm_fbdev_cma_init_with_funcs(A,B,C,D,E)
+ drm_fbdev_cma_init_with_funcs(A,B,D,E)
|
- drm_fbdev_cma_init(A,B,C,D)
+ drm_fbdev_cma_init(A,B,D)
)
@@
identifier r.C;
type T;
expression V;
@@
- T C;
<...
when != C
- C = V;
...>
// </smpl>
Changes since v1:
- Rebased on top of the tip of drm-misc-next.
- Remove mention to sti since a proper fix got merged.
Suggested-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170202162640.27261-1-krisman@collabora.co.uk
Apparently there are machines out there with Skylake CPU and KabyPoint
PCH. Judging from our driver code, there doesn't seem to be any code
paths that would do anything different between SunrisePoint and
KabyPoint PCHs, so it would seem okay to accept the combo without
warnings.
Fixes: 22dea0be50 ("drm/i915: Introduce Kabypoint PCH for Kabylake H/DT.")
References: https://lists.freedesktop.org/archives/intel-gfx/2017-February/118611.html
Reported-by: Rainer Koenig <Rainer.Koenig@ts.fujitsu.com>
Cc: Rainer Koenig <Rainer.Koenig@ts.fujitsu.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: <stable@vger.kernel.org> # v4.8+
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1485956769-26015-1-git-send-email-jani.nikula@intel.com
Commit 920cf41949 ("drm/i915: Introduce an internal allocator for
disposable private objects") introduced a regression for the kernel
running as Xen dom0: when switching to graphics mode a GPU HANG
occurred.
Reason seems to be a missing adaption similar to that done in
commit 7453c549f5 ("swiotlb: Export swiotlb_max_segment to users")
to i915_gem_object_get_pages_internal().
So limit the maximum page order to be used according to the maximum
swiotlb segment size instead to the complete swiotlb size.
Fixes: 920cf41949 ("drm/i915: Introduce an internal allocator for disposable private objects")
Signed-off-by: Juergen Gross <jgross@suse.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170202094711.939-1-jgross@suse.com
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.10-rc1+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
We may keep the crtc's enabled when userspace unsets all framebuffers but
keeps the crtc active. This exposes a WARN in fbc_global disable, and
a lot of bugs in our hardware readout code. Solve this by disabling
all crtc's for now.
Changes since v1:
- Use lock_all_ctx instead of lock_all.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481812185-19098-4-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Primarily this serves as a sanity check that the bit has been cleared
before we suspend (and hasn't reappeared after resume).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170201131222.11882-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
As we now flag when the GPU signals a context-switch and do not read the
status register before we see that signal, we do not have to ensure that
it is cleared upon reset (and can leave it to the GPU to reset it from
the power context).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170201125338.12932-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Enable MIPI IO WA for BXT DSI as per bspec and
program the DSI regulators.
v2: Moved IO enable to pre-enable as per Mika's
review comments. Also reused the existing register
definition for BXT_P_CR_GT_DISP_PWRON.
v3: Added Programming the DSI regulators as per disable/enable
sequences.
v4: Restricting regulator changes to BXT as suggested by
Jani/Mika
v5: Removed redundant read/modify for regulator register as
per Jani's comment. Maintain enable/disable symmetry as per spec.
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Acked-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1485353603-11260-1-git-send-email-vidya.srinivas@intel.com
On a non-llc system, the objects are created with .cache_level =
CACHE_NONE and so the transition to uncached for scanout is a no-op.
However, if the object was never written to, it will still be in the CPU
domain (having been zeroed out by shmemfs). Those cachelines need to be
flushed prior to display.
Reported-and-tested-by: Vito Caputo
Fixes: a6a7cc4b7d ("drm/i915: Always flush the dirty CPU cache when pinning the scanout")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.10-rc1+
Link: http://patchwork.freedesktop.org/patch/msgid/20170109111932.6342-1-chris@chris-wilson.co.uk
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson wants the new fence tracepoint added in
commit 8c96c67801
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue Jan 24 11:57:58 2017 +0000
dma/fence: Export enable-signaling tracepoint for emission by drivers
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Another round of -misc stuff:
- Noralf debugfs cleanup cleanup (not yet everything, some more driver
patches awaiting acks).
- More doc work.
- edid/infoframe fixes from Ville.
- misc 1-patch fixes all over, as usual
Noralf needs this for his tinydrm pull request.
* tag 'drm-misc-next-2017-01-30' of git://anongit.freedesktop.org/git/drm-misc: (48 commits)
drm/vc4: Remove vc4_debugfs_cleanup()
dma/fence: Export enable-signaling tracepoint for emission by drivers
drm/tilcdc: Remove tilcdc_debugfs_cleanup()
drm/tegra: Remove tegra_debugfs_cleanup()
drm/sti: Remove drm_debugfs_remove_files() calls
drm/radeon: Remove drm_debugfs_remove_files() call
drm/omap: Remove omap_debugfs_cleanup()
drm/hdlcd: Remove hdlcd_debugfs_cleanup()
drm/etnaviv: Remove etnaviv_debugfs_cleanup()
drm/etnaviv: allow build with COMPILE_TEST
drm/amd/amdgpu: Remove drm_debugfs_remove_files() call
drm/prime: Clarify DMA-BUF/GEM Object lifetime
drm/ttm: Make sure BOs being swapped out are cacheable
drm/atomic: Remove drm_atomic_debugfs_cleanup()
drm: drm_minor_register(): Clean up debugfs on failure
drm: debugfs: Remove all files automatically on cleanup
drm/fourcc: add vivante tiled layout format modifiers
drm/edid: Set YQ bits in the AVI infoframe according to CEA-861-F
drm/edid: Set AVI infoframe Q even when QS=0
drm/edid: Introduce drm_hdmi_avi_infoframe_quant_range()
...
Updated pull request after I pulled first time :)
* 'drm-intel-next' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: Pevent copying uninitialised garbage into vma->ggtt_view
Just do a quick check that the stolen memory address range doesn't
overflow our chosen integer type.
v2: Add add_overflows() to utils with the promise that gcc7 can do this
better than C and then maybe it will have a proper definition in core.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170130134721.5159-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The conversion of stolen to use phys_addr_t (from essentially u32)
sparked an interesting discussion. We treat stolen memory as only
accessible from the GPU (the DMA device) - an attempt to use it from the
CPU will generate a MCE on gen6 onwards, although it is in theory a
physical address that can be dereferenced from the CPU as demonstrated
by earlier generations. As such, using phys_addr_t has the wrong
connotations and as we pass the address into the DMA device via
dma_addr_t (through the scatterlists used to program the GTT entries),
we should treat it as dma_addr_t throughout.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170127165531.28135-1-chris@chris-wilson.co.uk
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
If we abort the i915_gem_internal get_pages, we mark the failing sg as
the last. However, that means we iterate upto and including the failing
sg element and results in us trying to free the unallocated sg_page().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170131104630.3074-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Having converted the force_wake_get/_put routines for a vGPU to be no-op,
we can use the common mmio accessors and remove our specialised routines
that simply skipped the calls to control force_wake.
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1485408228-12932-1-git-send-email-weinan.z.li@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
For a virtualized GPU, the host maintains the forcewake state on the real
device. As we don't control forcewake ourselves, we can simply set
force_wake_get() and force_wake_put() to be no-ops. By setting the vfuncs,
we adjust both the manual control of forcewake and around the mmio
accessors (making our vgpu specific mmio routines redundant and to be
removed in the next patch).
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1485408013-12780-1-git-send-email-weinan.z.li@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Include extra information such as the user_handle and hw_id so that
userspace can identify which of their contexts hung, useful if they are
performing self-diagnositics.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170129092433.10483-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Extend intel_detect_preproduction_hw() to include BXT A and B steppings.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: "Zanoni, Paulo R" <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170130104458.2653-3-chris@chris-wilson.co.uk
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Preproduction sdv are not supported beyond the release of production
hardware, and continued use is ill-advised. Mark the kernel as tainted
to reinforce the error.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: "Zanoni, Paulo R" <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170130104458.2653-2-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
As we add new generations, we should keep detecting new pre-production
system development platforms that were temporarily enabled to facilitate
initial development and now superseded by production systems. To make
it easier to add more platforms, split the if into a series of logical
operations.
v2: s/sdv/pre/ - not all system development vehicles are for
preproduction usage.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: "Zanoni, Paulo R" <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170130104458.2653-1-chris@chris-wilson.co.uk
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
This allows the use of more than 3 ports/pipes/whatever without tricks,
even if the register offsets are not evenly spaced.
There's the risk of out of bounds access if we're not careful; currently
that would "just" lead to the wrong register offset being used. It might
be possible to add build bug ons for build time constant indexing.
We already have ports defined up to E, not sure if we might have bugs
related to them and the current _PORT3() macro.
text data bss dec hex filename
1239868 46199 4096 1290163 13afb3 drivers/gpu/drm/i915/i915.ko
1238828 46199 4096 1289123 13aba3 drivers/gpu/drm/i915/i915.ko
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1485532626-20923-1-git-send-email-jani.nikula@intel.com
Chris Wilson