We don't need to stash away 'isr' in the aux structure to pass to two
functions. Let's use a local variable instead. And we can complete the
completion variable in one place instead of two to simplify the code.
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Abhinav Kumar <abhinavk@codeaurora.org>
Cc: Kuogee Hsieh <khsieh@codeaurora.org>
Cc: aravindh@codeaurora.org
Cc: Sean Paul <sean@poorly.run>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Kuogee Hsieh <khsieh@codeaurora.org>
Link: https://lore.kernel.org/r/20210507212505.1224111-2-swboyd@chromium.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fix following warnings generated when either DP or DSI support is
disabled:
drivers/gpu/drm/msm/disp/msm_disp_snapshot_util.c:141:3: error: implicit declaration of function 'msm_dp_snapshot'; did you mean 'msm_dsi_snapshot'? [-Werror=implicit-function-declaration]
drivers/gpu/drm/msm/msm_kms.h:127:26: warning: 'struct msm_disp_state' declared inside parameter list will not be visible outside of this definition or declaration
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:867:21: error: initialization of 'void (*)(struct msm_disp_state *, struct msm_kms *)' from incompatible pointer type 'void (*)(struct msm_disp_state *, struct msm_kms *)' [-Werror=incompatible-pointer-types]
drivers/gpu/drm/msm/dsi/dsi.h:94:30: warning: 'struct msm_disp_state' declared inside parameter list will not be visible outside of this definition or declaration
Reported-by: kernel test robot <lkp@intel.com>
Cc: Abhinav Kumar <abhinavk@codeaurora.org>
Fixes: 1c3b7ac1a71d ("drm/msm: pass dump state as a function argument")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210527220330.3364716-1-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
There shouldn't be any reason to ever use uncached over writecombine,
so just use writecombine for MSM_BO_UNCACHED.
Note: userspace never used MSM_BO_UNCACHED anyway
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Acked-by: Jordan Crouse <jordan@cosmicpenguin.net>
Link: https://lore.kernel.org/r/20210423190833.25319-6-jonathan@marek.ca
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add a new cache mode for creating coherent host-cached BOs.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Link: https://lore.kernel.org/r/20210423190833.25319-5-jonathan@marek.ca
Signed-off-by: Rob Clark <robdclark@chromium.org>
Use the same logic as the userspace mapping.
This fixes msm_rd with cached BOs.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Acked-by: Jordan Crouse <jordan@cosmicpenguin.net>
Link: https://lore.kernel.org/r/20210423190833.25319-4-jonathan@marek.ca
Signed-off-by: Rob Clark <robdclark@chromium.org>
msm_gem_get_vaddr() currently always maps as writecombine, so use the right
flag instead of relying on broken behavior (things don't actually work if
they are mapped as uncached).
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Acked-by: Jordan Crouse <jordan@cosmicpenguin.net>
Link: https://lore.kernel.org/r/20210423190833.25319-3-jonathan@marek.ca
Signed-off-by: Rob Clark <robdclark@chromium.org>
No one knows what this is for anymore, so just remove it.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Acked-by: Jordan Crouse <jordan@cosmicpenguin.net>
Link: https://lore.kernel.org/r/20210423190833.25319-2-jonathan@marek.ca
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add DSI PHY registers to the msm state snapshots to be able to check
their contents.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210427001828.2375555-5-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Instead of looping throught the resources each time to get the DSI CTRL
area size, get it at the ioremap time.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210427001828.2375555-4-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Instead of allocating snapshotting structure at the driver probe time
and later handling concurrent access, actual state, etc, make
msm_disp_state transient struct. Allocate one when snapshotting happens
and free it after coredump data is read by userspace.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210427001828.2375555-3-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Instead of always getting the disp_state from drm device, pass it as an
argument.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210427001828.2375555-2-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add snapshot points across dpu driver to trigger dumps when critical
errors are hit.
changes in v5:
- change the callers to use the snapshot function directly
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/1618606645-19695-8-git-send-email-abhinavk@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add an API to take a snapshot of DPU controller registers. This API
will be used by the msm_disp_snapshot module to capture the DPU
snapshot.
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/1618606645-19695-6-git-send-email-abhinavk@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add an API to take a snapshot of DP controller registers. This API
will be used by the msm_disp_snapshot module to capture the DP
snapshot.
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/1618606645-19695-5-git-send-email-abhinavk@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add an API to take a snapshot of DSI controller registers. This API
will be used by the msm_disp_snapshot module to capture the DSI
snapshot.
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/1618606645-19695-4-git-send-email-abhinavk@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add the msm_disp_snapshot module which adds supports to dump dpu
registers and capture the drm atomic state which can be used in
case of error conditions.
changes in v5:
- start storing disp_state in msm_kms instead of dpu_kms
- get rid of MSM_DISP_SNAPSHOT_IN_* enum by simplifying the functions
- move snprintf inside the snapshot core by using varargs
- get rid of some stale code comments
- allow snapshot module for non-DPU targets
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/1618606645-19695-3-git-send-email-abhinavk@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Currently drm_atomic_print_state() internally allocates and uses a
drm_info printer. Allow it to accept any drm_printer type so that
the API can be leveraged even for taking drm snapshot.
Rename the drm_atomic_print_state() to drm_atomic_print_new_state()
so that it reflects its functionality better.
changes in v5:
- none
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/1618606645-19695-2-git-send-email-abhinavk@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
irq_hpd interrupt should be handled after dongle plugged in and
before dongle unplugged. Hence irq_hpd interrupt is enabled at
the end of the plugin handle and disabled at the beginning of
unplugged handle. Current irq_hpd with sink_count = 0 is wrongly
handled same as the dongle unplugged which tears down the mainlink
and disables the phy. This patch fixes this problem by only tearing
down the mainlink but keeping phy enabled at irq_hpd with
sink_count = 0 handle so that next irq_hpd with sink_count =1 can be
handled by setup mainlink only. This patch also set dongle into D3
(power off) state at end of handling irq_hpd with sink_count = 0.
Changes in v2:
-- add ctrl->phy_Power_count
Changes in v3:
-- del ctrl->phy_Power_count
-- add phy_power_off to dp_ctrl_off_link_stream()
Changes in v4:
-- return immediately if clock disable failed at dp_ctrl_off_link_stream()
Changes in v5:
-- set dongle to D3 (power off) state at dp_ctrl_off_link_stream()
Changes in v6:
-- add Fixes tag
Fixes: ea9f337ce8 ("drm/msm/dp: reset dp controller only at boot up and pm_resume")
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1621635930-30161-1-git-send-email-khsieh@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
* dp_mst: Fix build error
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmDMX1gACgkQaA3BHVML
eiP6Mwf/WshoUNBK1or2di2TRmYrZAcCqhmqfobAn21+XA/uVkrYy7G0gt7P39ND
nDuAgfbQEMiopVNP/M3Fnchk4IT0NbClUvSYbNSdabfxOx8ekDYiOv5T0L8ppu05
yw9k7qFGApi4rnMt+5BDYj0u5R9MT8+fnDN6g20Djn8J4C0IXS+T6pIjEpLMPagf
aO8ZFibpJ/WOlRur0jfwJQfBVOVlCdAtiIduzsNL1AczmkMk5jtGU2pq3M9Gs03R
f2z2tySJgGgybJdMq4M4yL+XN7V6r7q3U+DgiVM0TWk/e/gOvJrMTnMfz4NWmg0O
b3HL6HrO5JYloAGLO7HlGqCrSC+N8w==
=II0P
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-fixes-2021-06-18' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
Short summary of fixes pull:
* hyperv: advertise the correct formatmodifiers for its primary plane
* dp_mst: VCPI fixes to make it work with StarTech hub
* dp_mst: Fix build error
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YMxgI1oluBpPyfu6@linux-uq9g.fritz.box
The two major changes here are fixed YUV support as well as scaling on
Tegra186 and later. This allows Tegra DRM to be used, for example, as a
video sink for the kmssink gstreamer plugin. The remainder of the
changes are minor fixes.
-----BEGIN PGP SIGNATURE-----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=l2Ew
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-5.14-rc1' of ssh://git.freedesktop.org/git/tegra/linux into drm-next
drm/tegra: Changes for v5.14-rc1
The two major changes here are fixed YUV support as well as scaling on
Tegra186 and later. This allows Tegra DRM to be used, for example, as a
video sink for the kmssink gstreamer plugin. The remainder of the
changes are minor fixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210611165157.3569315-1-thierry.reding@gmail.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmDPuyMeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGvxgH/RKvSuRPwkJ2Jcp9
VLi5kCbqtJlYLq6tB6peSJ8otKgxkcRwC0pIY4LlYIAWYboktLQ5RKp/9nB2h2FN
aMZUMu6AI/lVJyFMI5MnKnJIUiUq+WXR3lSSlw68vwFLFdzqUZFNq+bqeiVvnIy1
yqA6naj24Tu/RbYffQoPvdSJcU2SLXRMxwD8HRGiU2d51RaFsOvsZvF+P5TVcsEV
ZmttJeER21CaI/A809eqaFmyGrUOcZZK9roZEbMwanTZOMw18biEsLu/UH4kBX01
JC4+RlGxcWjQ5YNZgChsgoOK/CHzc6ITztTntdeDWAvwZjQFzV7pCy4/3BWne3O+
5178yHM=
=o8cN
-----END PGP SIGNATURE-----
Backmerge tag 'v5.13-rc7' into drm-next
Backmerge Linux 5.13-rc7 to make some pulls from later bases apply,
and to bake in the conflicts so far.
No need for a separate flag now that DCN3.1 is not in bring up.
Fold into DRM_AMD_DC_DCN like previous DCN IPs.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Function radeon_fence_driver_init always returns success,
the function type maybe coule be changed to void.
This patch first delete the check of the return
value of the function call radeon_fence_driver_init, then,
optimise the function declaration and function to void type.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Introduce CMD for EDID CEA block parsing
- Add SCR5 definition for reporting eDP power sequencer status
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Increase width of some variables to avoid comparing integers of
different widths
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When the call to platform_get_irq() to obtain the IRQ of the lcd fails, the
returned error code should be propagated. However, we currently do not
explicitly assign this error code to 'ret'. As a result, 0 was incorrectly
returned.
Fixes: 7f7b96a8a0 ("drm/kmb: Add support for KeemBay Display")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210513134639.6541-1-thunder.leizhen@huawei.com
This reverts commit 1815d9c86e.
Unfortunately this inverts the locking hierarchy, so back to the
drawing board. Full lockdep splat below:
======================================================
WARNING: possible circular locking dependency detected
5.13.0-rc7-CI-CI_DRM_10254+ #1 Not tainted
------------------------------------------------------
kms_frontbuffer/1087 is trying to acquire lock:
ffff88810dcd01a8 (&dev->master_mutex){+.+.}-{3:3}, at: drm_is_current_master+0x1b/0x40
but task is already holding lock:
ffff88810dcd0488 (&dev->mode_config.mutex){+.+.}-{3:3}, at: drm_mode_getconnector+0x1c6/0x4a0
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&dev->mode_config.mutex){+.+.}-{3:3}:
__mutex_lock+0xab/0x970
drm_client_modeset_probe+0x22e/0xca0
__drm_fb_helper_initial_config_and_unlock+0x42/0x540
intel_fbdev_initial_config+0xf/0x20 [i915]
async_run_entry_fn+0x28/0x130
process_one_work+0x26d/0x5c0
worker_thread+0x37/0x380
kthread+0x144/0x170
ret_from_fork+0x1f/0x30
-> #1 (&client->modeset_mutex){+.+.}-{3:3}:
__mutex_lock+0xab/0x970
drm_client_modeset_commit_locked+0x1c/0x180
drm_client_modeset_commit+0x1c/0x40
__drm_fb_helper_restore_fbdev_mode_unlocked+0x88/0xb0
drm_fb_helper_set_par+0x34/0x40
intel_fbdev_set_par+0x11/0x40 [i915]
fbcon_init+0x270/0x4f0
visual_init+0xc6/0x130
do_bind_con_driver+0x1e5/0x2d0
do_take_over_console+0x10e/0x180
do_fbcon_takeover+0x53/0xb0
register_framebuffer+0x22d/0x310
__drm_fb_helper_initial_config_and_unlock+0x36c/0x540
intel_fbdev_initial_config+0xf/0x20 [i915]
async_run_entry_fn+0x28/0x130
process_one_work+0x26d/0x5c0
worker_thread+0x37/0x380
kthread+0x144/0x170
ret_from_fork+0x1f/0x30
-> #0 (&dev->master_mutex){+.+.}-{3:3}:
__lock_acquire+0x151e/0x2590
lock_acquire+0xd1/0x3d0
__mutex_lock+0xab/0x970
drm_is_current_master+0x1b/0x40
drm_mode_getconnector+0x37e/0x4a0
drm_ioctl_kernel+0xa8/0xf0
drm_ioctl+0x1e8/0x390
__x64_sys_ioctl+0x6a/0xa0
do_syscall_64+0x39/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
other info that might help us debug this:
Chain exists of: &dev->master_mutex --> &client->modeset_mutex --> &dev->mode_config.mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&dev->mode_config.mutex);
lock(&client->modeset_mutex);
lock(&dev->mode_config.mutex);
lock(&dev->master_mutex);
*** DEADLOCK ***
1 lock held by kms_frontbuffer/1087:
#0: ffff88810dcd0488 (&dev->mode_config.mutex){+.+.}-{3:3}, at: drm_mode_getconnector+0x1c6/0x4a0
stack backtrace:
CPU: 7 PID: 1087 Comm: kms_frontbuffer Not tainted 5.13.0-rc7-CI-CI_DRM_10254+ #1
Hardware name: Intel Corporation Ice Lake Client Platform/IceLake U DDR4 SODIMM PD RVP TLC, BIOS ICLSFWR1.R00.3234.A01.1906141750 06/14/2019
Call Trace:
dump_stack+0x7f/0xad
check_noncircular+0x12e/0x150
__lock_acquire+0x151e/0x2590
lock_acquire+0xd1/0x3d0
__mutex_lock+0xab/0x970
drm_is_current_master+0x1b/0x40
drm_mode_getconnector+0x37e/0x4a0
drm_ioctl_kernel+0xa8/0xf0
drm_ioctl+0x1e8/0x390
__x64_sys_ioctl+0x6a/0xa0
do_syscall_64+0x39/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Note that this broke the intel-gfx CI pretty much across the board
because it has to reboot machines after it hits a lockdep splat.
Testcase: igt/debugfs_test/read_all_entries
Acked-by: Petri Latvala <petri.latvala@intel.com>
Fixes: 1815d9c86e ("drm: add a locked version of drm_is_current_master")
Cc: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210622075409.2673805-1-daniel.vetter@ffwll.ch
[why]
Updating the file to fix the missing line
Signed-off-by: Logush Oliver <ollogush@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
recent VBIOS dce_infotable reference clock change caused a I2c regression.
instead of relying on vbios, let's get it from HW directly.
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
After panel power up, if PSR entry attempted too early,
PSR state may get stuck in transition.
This could happen if the panel is not ready
to respond to the SDP PSR entry message.
In this case dmub f/w is unable to abort PSR entry
since abortion is not permitted after the SDP has been sent.
[How]
Skip 5 pageflips before PSR enable.
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Some SOC BB paramters may vary per SKU, and it does
not make sense for driver to hardcode these values.
This change was added for dcn30 and dcn301, but not
for dcn302 and dcn303
[how]
Parse the values from VBIOS if available, and use
them if valid
Fixes: 93669c8e48 ("drm/amd/display: get socBB from VBIOS")
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
extended_end_address can only be calculated from the extended_address and
extended_size
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Ashley Thomas <Ashley.Thomas2@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The voltage swing has to start from the minimum level when transmit TPS1 over
Main-Link in clock recovery sequence.
The lane settings from current design will inherit the existing VS/PE values
that could be adjusted by Repeater X, and to use the adjusted voltage swing level
in Repeater X-1 or DPRX could violate DP specs.
[How]
To reset VS from lane settings after LTTPRs have been trained to meet the requirement.
Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Some timings with a large VBlank cause the value to overflow the
register related, while also producing other wrong values in DML output.
[how]
Clamp VStartup at the DCN3.1 maximum value
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When video plane is rotate the cursor position is incorrect and not
matching the desktop location.
[How]
When a plane is rotated 90 or 270 degrees, the src_rect.width and height
should be swapped when determining the scaling factor compared to the
dst_rect.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 631003101c.
Reason for revert: side effect of enlarging CP_MEC_DOORBELL_RANGE may
cause some APUs fail to enter gfxoff in certain user cases.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 1ba7b24ba6.
Reason for revert: Side effect of enlarging CP_MEC_DOORBELL_RANGE may
cause some APUs fail to enter gfxoff in certain user cases.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For some reason the vfio_mdev shim mdev_driver has its own module and
kconfig. As the next patch requires access to it from mdev.ko merge the
two modules together and remove VFIO_MDEV_DEVICE.
A later patch deletes this driver entirely.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Link: https://lore.kernel.org/r/20210617142218.1877096-7-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This reverts commit 4cbbe34807.
Reason for revert: side effect of enlarging CP_MEC_DOORBELL_RANGE may
cause some APUs fail to enter gfxoff in certain user cases.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This reverts commit 1c0b0efd14.
Reason for revert: Side effect of enlarging CP_MEC_DOORBELL_RANGE may
cause some APUs fail to enter gfxoff in certain user cases.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Once drm_framebuffer_init has returned 0, the framebuffer is hooked up
to the reference counting machinery and can no longer be destroyed with
a simple kfree. Therefore, it must be called last.
If drm_framebuffer_init returns 0 but its caller then returns non-0,
there will likely be memory corruption fireworks down the road.
The following lead me to this fix:
[ 12.891228] kernel BUG at lib/list_debug.c:25!
[...]
[ 12.891263] RIP: 0010:__list_add_valid+0x4b/0x70
[...]
[ 12.891324] Call Trace:
[ 12.891330] drm_framebuffer_init+0xb5/0x100 [drm]
[ 12.891378] amdgpu_display_gem_fb_verify_and_init+0x47/0x120 [amdgpu]
[ 12.891592] ? amdgpu_display_user_framebuffer_create+0x10d/0x1f0 [amdgpu]
[ 12.891794] amdgpu_display_user_framebuffer_create+0x126/0x1f0 [amdgpu]
[ 12.891995] drm_internal_framebuffer_create+0x378/0x3f0 [drm]
[ 12.892036] ? drm_internal_framebuffer_create+0x3f0/0x3f0 [drm]
[ 12.892075] drm_mode_addfb2+0x34/0xd0 [drm]
[ 12.892115] ? drm_internal_framebuffer_create+0x3f0/0x3f0 [drm]
[ 12.892153] drm_ioctl_kernel+0xe2/0x150 [drm]
[ 12.892193] drm_ioctl+0x3da/0x460 [drm]
[ 12.892232] ? drm_internal_framebuffer_create+0x3f0/0x3f0 [drm]
[ 12.892274] amdgpu_drm_ioctl+0x43/0x80 [amdgpu]
[ 12.892475] __se_sys_ioctl+0x72/0xc0
[ 12.892483] do_syscall_64+0x33/0x40
[ 12.892491] entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: f258907fdd "drm/amdgpu: Verify bo size can fit framebuffer size on init."
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
While checking the master status of the DRM file in
drm_is_current_master(), the device's master mutex should be
held. Without the mutex, the pointer fpriv->master may be freed
concurrently by another process calling drm_setmaster_ioctl(). This
could lead to use-after-free errors when the pointer is subsequently
dereferenced in drm_lease_owner().
The callers of drm_is_current_master() from drm_auth.c hold the
device's master mutex, but external callers do not. Hence, we implement
drm_is_current_master_locked() to be used within drm_auth.c, and
modify drm_is_current_master() to grab the device's master mutex
before checking the master status.
Reported-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210620110327.4964-2-desmondcheongzx@gmail.com
There is a reversed if statement in amdgpu_preempt_mgr_new() so it
always returns -ENOMEM.
Fixes: 09b020bb05 ("Merge tag 'drm-misc-next-2021-06-09' of git://anongit.freedesktop.org/drm/drm-misc into drm-next")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YMxbQXg/Wqm0ACxt@mwanda
Signed-off-by: Christian König <christian.koenig@amd.com>
Reference the spi_device_id table to silence W=1 warning:
drivers/gpu/drm/panel/panel-samsung-ld9040.c:377:35:
warning: ‘ld9040_ids’ defined but not used [-Wunused-const-variable=]
This also would be needed for matching the driver if booted without
CONFIG_OF (although it's not necessarily real case).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526123002.12913-1-krzysztof.kozlowski@canonical.com
'commit eec44d44a3 ("drm/atmel: Use drm_atomic_helper_commit")'
removed the home-grown handling of atomic commits and exposed an issue
in the crtc atomic commit handling where vblank is expected to be
enabled but hasn't yet, causing kernel warnings during boot. This patch
cleans up the crtc vblank handling thus removing the warning on boot.
Fixes: eec44d44a3 ("drm/atmel: Use drm_atomic_helper_commit")
Signed-off-by: Dan Sneddon <dan.sneddon@microchip.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602160846.5013-1-dan.sneddon@microchip.com
Once drm_framebuffer_init has returned 0, the framebuffer is hooked up
to the reference counting machinery and can no longer be destroyed with
a simple kfree. Therefore, it must be called last.
If drm_framebuffer_init returns 0 but its caller then returns non-0,
there will likely be memory corruption fireworks down the road.
The following lead me to this fix:
[ 12.891228] kernel BUG at lib/list_debug.c:25!
[...]
[ 12.891263] RIP: 0010:__list_add_valid+0x4b/0x70
[...]
[ 12.891324] Call Trace:
[ 12.891330] drm_framebuffer_init+0xb5/0x100 [drm]
[ 12.891378] amdgpu_display_gem_fb_verify_and_init+0x47/0x120 [amdgpu]
[ 12.891592] ? amdgpu_display_user_framebuffer_create+0x10d/0x1f0 [amdgpu]
[ 12.891794] amdgpu_display_user_framebuffer_create+0x126/0x1f0 [amdgpu]
[ 12.891995] drm_internal_framebuffer_create+0x378/0x3f0 [drm]
[ 12.892036] ? drm_internal_framebuffer_create+0x3f0/0x3f0 [drm]
[ 12.892075] drm_mode_addfb2+0x34/0xd0 [drm]
[ 12.892115] ? drm_internal_framebuffer_create+0x3f0/0x3f0 [drm]
[ 12.892153] drm_ioctl_kernel+0xe2/0x150 [drm]
[ 12.892193] drm_ioctl+0x3da/0x460 [drm]
[ 12.892232] ? drm_internal_framebuffer_create+0x3f0/0x3f0 [drm]
[ 12.892274] amdgpu_drm_ioctl+0x43/0x80 [amdgpu]
[ 12.892475] __se_sys_ioctl+0x72/0xc0
[ 12.892483] do_syscall_64+0x33/0x40
[ 12.892491] entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: f258907fdd "drm/amdgpu: Verify bo size can fit framebuffer size on init."
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix coccicheck warning:
./drivers/gpu/drm/amd/display/dc/dml/dcn31/display_rq_dlg_calc_31.c:
55:12-42: duplicated argument to && or ||
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Function 'dpp1_full_bypass' is declared twice, so remove the repeated
declaration and unnessary blank line.
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In preparation to enable -Wimplicit-fallthrough for Clang, fix
the following warning by replacing a /* fall through */ comment
with the new pseudo-keyword macro fallthrough:
rivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c:672:4: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
case AUX_TRANSACTION_REPLY_I2C_OVER_AUX_DEFER:
^
Notice that Clang doesn't recognize /* fall through */ comments as
implicit fall-through markings, so in order to globally enable
-Wimplicit-fallthrough for Clang, these comments need to be
replaced with fallthrough; in the whole codebase.
Link: https://github.com/KSPP/linux/issues/115
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GCC reports the following warning with W=1:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_psr.c:70:13:
warning:
variable ‘dc’ set but not used [-Wunused-but-set-variable]
70 | struct dc *dc = NULL;
| ^~
This variable is not used in function, this commit remove it to
fix the warning.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GCC reports the following warning with W=1:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:3635:17:
warning:
variable ‘status’ set but not used [-Wunused-but-set-variable]
3635 | enum dc_status status = DC_ERROR_UNEXPECTED;
| ^~~~~~
The variable should be used for error check, let's fix it.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To avoid any list corruption.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the past, we use MMSCH to determine whether a VCN is enabled or not.
This is not reliable since after a FLR, MMSCH may report junk data.
It is better to use IP discovery data.
Signed-off-by: Bokun Zhang <Bokun.Zhang@amd.com>
Signed-off-by: Peng Ju Zhou <PengJu.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pagelist is no long used in amdgpu_gart_bind. Remove it.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use SMU to update the bad pages rather than directly
accessing the EEPROM from the driver.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix non-coherent bit of iolink properties flag
which always is 0.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Recently, we added support for an experimental feature named Freesync
video; for more details on that, refer to:
commit 6f59f229f8 ("drm/amd/display: Skip modeset for front porch change")
commit d10cd527f5 ("drm/amd/display: Add freesync video modes based on preferred modes")
commit 0eb1af2e82 ("drm/amd/display: Add module parameter for freesync video mode")
Nevertheless, we did not document it in detail in our driver. This
commit introduces a kernel-doc and expands the module parameter
description.
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Probably a rebase leftover. This doesn't apply to SR-IOV, and
the non-SR-IOV code below it already handles this properly.
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Current watermarks end up programming lowers watermarks which
results in screen flickering and underflow for certain modes like 1440p.
[How]
Add 11us to stutter exit & stutter enter plus exit watermark.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Because TTM do page counting on userptr BOs which is actually not
needed. To avoid that, lets set TTM_PAGE_FLAG_SG after tt_create and
before tt_populate.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If GC has entered CGPG, ringing doorbell > first page doesn't wakeup GC.
Enlarge CP_MEC_DOORBELL_RANGE_UPPER to workaround this issue.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
If GC has entered CGPG, ringing doorbell > first page doesn't wakeup GC.
Enlarge CP_MEC_DOORBELL_RANGE_UPPER to workaround this issue.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Commit 3769e4c0af ("drm/dp_mst: Avoid to mess up payload table by
ports in stale topology") added to calls to drm_dbg_kms() but it
missed the first parameter, the drm device breaking the build.
Fixes: 3769e4c0af ("drm/dp_mst: Avoid to mess up payload table by ports in stale topology")
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: stable@vger.kernel.org
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210616194415.36926-1-jose.souza@intel.com
[Why]
After unplug/hotplug hub from the system, userspace might start to
clear stale payloads gradually. If we call drm_dp_mst_deallocate_vcpi()
to release stale VCPI of those ports which are not relating to current
topology, we have chane to wrongly clear active payload table entry for
current topology.
E.g.
We have allocated VCPI 1 in current payload table and we call
drm_dp_mst_deallocate_vcpi() to clean VCPI 1 in stale topology. In
drm_dp_mst_deallocate_vcpi(), it will call drm_dp_mst_put_payload_id()
tp put VCPI 1 and which means ID 1 is available again. Thereafter, if we
want to allocate a new payload stream, it will find ID 1 is available by
drm_dp_mst_assign_payload_id(). However, ID 1 is being used
[How]
Check target sink is relating to current topology or not before doing
any payload table update.
Searching upward to find the target sink's relevant root branch device.
If the found root branch device is not the same root of current
topology, don't update payload table.
Changes since v1:
* Change debug macro to use drm_dbg_kms() instead
* Amend the commit message to add Cc tag.
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210616035501.3776-3-Wayne.Lin@amd.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
[Why]
When we receive CSN message to notify one port is disconnected, we will
implicitly set its corresponding num_slots to 0. Later on, we will
eventually call drm_dp_update_payload_part1() to arrange down streams.
In drm_dp_update_payload_part1(), we iterate over all proposed_vcpis[]
to do the update. Not specific to a target sink only. For example, if we
light up 2 monitors, Monitor_A and Monitor_B, and then we unplug
Monitor_B. Later on, when we call drm_dp_update_payload_part1() to try
to update payload for Monitor_A, we'll also implicitly clean payload for
Monitor_B at the same time. And finally, when we try to call
drm_dp_update_payload_part1() to clean payload for Monitor_B, we will do
nothing at this time since payload for Monitor_B has been cleaned up
previously.
For StarTech 1to3 DP hub, it seems like if we didn't update DPCD payload
ID table then polling for "ACT Handled"(BIT_1 of DPCD 002C0h) will fail
and this polling will last for 3 seconds.
Therefore, guess the best way is we don't set the proposed_vcpi[]
diretly. Let user of these herlper functions to set the proposed_vcpi
directly.
[How]
1. Revert commit 7617e9621b ("drm/dp_mst: clear time slots for ports
invalid")
2. Tackle the issue in previous commit by skipping those trasient
proposed VCPIs. These stale VCPIs shoulde be explicitly cleared by
user later on.
Changes since v1:
* Change debug macro to use drm_dbg_kms() instead
* Amend the commit message to add Fixed & Cc tags
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Fixes: 7617e9621b ("drm/dp_mst: clear time slots for ports invalid")
Cc: Lyude Paul <lyude@redhat.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.5+
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210616035501.3776-2-Wayne.Lin@amd.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
If the HPD GPIO is not available and drm_probe_ddc fails, we end up
reading the HDMI_HOTPLUG register, but the controller might be powered
off resulting in a CPU hang. Make sure we have the power domain and the
HSM clock powered during the detect cycle to prevent the hang from
happening.
Fixes: 4f6e3d66ac ("drm/vc4: Add runtime PM support to the HDMI encoder driver")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210525091059.234116-4-maxime@cerno.tech
In order to access the HDMI controller, we need to make sure the HSM
clock is enabled. If we were to access it with the clock disabled, the
CPU would completely hang, resulting in an hard crash.
Since we have different code path that would require it, let's move that
clock enable / disable to runtime_pm that will take care of the
reference counting for us.
Fixes: 4f6e3d66ac ("drm/vc4: Add runtime PM support to the HDMI encoder driver")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210525091059.234116-3-maxime@cerno.tech
Fix the following coccicheck warning:
drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c:917:56-57:
pstate_enabled: first occurrence line 935, second occurrence line 937
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Calling free_mqd inside of destroy_queue_nocpsch_locked can cause a
circular lock. destroy_queue_nocpsch_locked is called under a DQM lock,
which is taken in MMU notifiers, potentially in FS reclaim context.
Taking another lock, which is BO reservation lock from free_mqd, while
causing an FS reclaim inside the DQM lock creates a problematic circular
lock dependency. Therefore move free_mqd out of
destroy_queue_nocpsch_locked and call it after unlocking DQM.
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If GC has entered CGPG, ringing doorbell > first page doesn't wakeup GC.
Enlarge CP_MEC_DOORBELL_RANGE_UPPER to workaround this issue.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If GC has entered CGPG, ringing doorbell > first page doesn't wakeup GC.
Enlarge CP_MEC_DOORBELL_RANGE_UPPER to workaround this issue.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move shadow_list to struct amdgpu_bo_vm as shadow BOs
are part of PT/PD BOs.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make provision to pass different ttm BO destroy callback
while creating a amdgpu_bo.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Page table entries are now in embedded in VM BO, so
we do not need struct amdgpu_vm_pt. This patch replaces
struct amdgpu_vm_pt with struct amdgpu_vm_bo_base.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For ASICs that need to load sys_drv_aux and sos_aux,
the sys_start_addr is not the start address of psp
ucode array because the sys_drv_aux and sos_aux actaully
located at the end of the ucode array, instead, the
psp ucode arrary start address should be sos_hdr +
sos_hdr_offset.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When some GPUs don't support SVM, don't disabe it for the entire process.
That would be inconsistent with the information the process got from the
topology, which indicates SVM support per GPU.
Instead disable SVM support only for the unsupported GPUs. This is done
by checking any per-device attributes against the bitmap of supported
GPUs. Also use the supported GPU bitmap to initialize access bitmaps for
new SVM address ranges.
Don't handle recoverable page faults from unsupported GPUs. (I don't
think there will be unsupported GPUs that can generate recoverable page
faults. But better safe than sorry.)
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
DP LL Compliance tests require that the first DPCD transactions after a
hotplug have a timeout interval of 3.2 ms. In cases where LTTPR is
disabled, this means that the first reads from DP_SET_POWER and DP_DPCD_REV must have an extended
timeout.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
When changing the DISPCLK_WDIVIDER value from 126 to 127, the change in
clock rate is too great for the FIFOs to handle. This can cause visible
corruption during clock change.
HW has handed down this register sequence to fix the issue.
[HOW]
The sequence, from HW:
a. 127 -> 126
Read DIG_FIFO_CAL_AVERAGE_LEVEL
FIFO level N = DIG_FIFO_CAL_AVERAGE_LEVEL / 4
Set DCCG_FIFO_ERRDET_OVR_EN = 1
Write 1 to OTGx_DROP_PIXEL for (N-4) times
Set DCCG_FIFO_ERRDET_OVR_EN = 0
Write DENTIST_DISPCLK_RDIVIDER = 126
Because of frequency stepping, sequence a can be executed to change the
divider from 127 to any other divider value.
b. 126 -> 127
Read DIG_FIFO_CAL_AVERAGE_LEVEL
FIFO level N = DIG_FIFO_CAL_AVERAGE_LEVEL / 4
Set DCCG_FIFO_ERRDET_OVR_EN = 1
Write 1 to OTGx_ADD_PIXEL for (12-N) times
Set DCCG_FIFO_ERRDET_OVR_EN = 0
Write DENTIST_DISPCLK_RDIVIDER = 127
Because of frequency stepping, divider must first be set from any other
divider value to 126 before executing sequence b.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Hardware has handed down a new sequence requiring the value of this
register be read from clk_mgr.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
SCR for DP 2.0 spec says that multiple LTTPRs must not be accessed in a
single AUX transaction.
There may be other places in future where breaking up AUX accesses is
necessary.
[HOW]
Partition the entire DPCD address space into blocks. When an incoming AUX
request spans multiple blocks, break up the request into multiple requests.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
DP 2.0 SCR specifies that
"A DPTX shall distinguish I2C_DEFER|AUX_ACK from AUX_DEFER. AUX retries
due to
I2C_DEFER are not counted as part of minimum 7 retires (sic) upon
AUX_DEFER’s"
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
DP 2.0 SCR specifies that TX devices must retry at least 7 times when
receiving an AUX DEFER reply from RX. In addition, the specification
states that the TX shall not retry indefinitely, and gives a suggestive
timeout interval of 50ms.
[HOW]
Keep retrying until both 7 or more retries have been made, and the 50ms
interval has passed.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
7 is the minimum number of retries TX must attempt on an AUX DEFER, not
the maximum.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Some DPCD addresses, notably LTTPR Capability registers, are expected to
be read all together in a single DPCD transaction. Rather than force callers to
read registers they don't need, we want to quietly extend the addresses
read, and only return back the values the caller asked for.
This does not affect DPCD writes.
[HOW]
Create an additional layer above AUX to perform 'checked' DPCD
transactions.
Iterate through an array of DPCD address ranges that are marked as being
contiguous. If a requested read falls within one of those ranges, extend
the read to include the entire range.
After DPCD has been queried, copy the requested bytes into the caller's
data buffer, and deallocate all resources used.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
DP specifies that an LTTPR device is only present if PHY_REPEATER_CNT is
0x80, 0x40, 0x20, 0x10, 0x08, 0x04, 0x02, or 0x01.
All other values should be considered no LTTPRs present.
[HOW]
Function dp_convert_to_count already does this check. Use it to determine
if PHY_REPEATER_CNT is a valid LTTPR count.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
SCR for DP2.0 requires that LT be performed with PHY_REPEATER_MODE
programmed to 0x55 (Transparent) whenever PHY_REPEATER_CNT is any value
other than 0x80, 0x40, 0x20, 0x10, 0x08, 0x04, 0x02, or 0x01.
[HOW]
Write Non-Transparent (0xAA) to PHY_REPEATER_MODE when LTTPRs detected and Non-Transparent is
requested.
Write Transparent in all other cases.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
SCR for DP 2.0 Spec states that a DPTX shall put LTTPRs into Transparent
mode after reading LTTPR Capability registers on HPD.
The wording of the SCR is somewhat ambiguous as to whether
Transparent mode must be set explicity, or is implicitly set on LTTPR
capability read. Explicitly setting Transparent mode after LTTPR
capability read should cover all
cases.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
SCR for DP 2.0 requires that LTTPR caps be read first on hotplug.
For the sake of consistency, this should also be the case on bootup.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
We want LTTPR capabilities to be readable from more places than just
retrieve_link_cap
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
A new SCR for the DP2.0 spec requires that LTTPR caps be the first thing
read from DPCD upon hotplug.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Improve the maintain/read abilities of dm code.
[How]
Create amdgpu_dm_psr.c/h files.
Move psr function from amdgpu_dm.c
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixed:
- LTTPR improvements
- Backlight improvements
- eDP hotplug detection
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To change the swizzle visual confirm reference pipe from top pipe to
bottom pipe due to bottom pipe information would be more important
for multiple overlay case.
Signed-off-by: Po-Ting Chen <robin.chen@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Move mst start top mgr in dc_link_detect layer.
Remove unused same_dpcd variable.
Move PEAK_FACTOR_X1000 and LINK_TRAINING_MAX_VERIFY_RETRY
to the proper header for defining dc link internal constant.
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Tune backlight ramping profiles for each Vari-Bright level to suit
customer preferences
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some custom platforms use eDP hotplug events to notify panel
capability changes that should be reported
[How]
Add a DC config option that unblocks eDP hotplug events
Signed-off-by: Yi-Ling Chen <Yi-Ling.Chen2@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Ability to triage DMCUB is improved with availability of certain
dmub registers not currently captured in crash dump diagnostic data.
[HOW]
Add dmub registers to diagnostic data collection.
Thanks Nicholas Kazlauskas for awesome input on this!
Signed-off-by: Ashley Thomas <Ashley.Thomas2@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
get_wave_state acquires the mmap_lock on copy_to_user but so do
mmu_notifiers. mmu_notifiers allows dqm locking so do get_wave_state
outside the dqm_lock to prevent circular locking.
v2: squash in unused variable removal.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a gcc '-Wunused-const-variable' warning:
drivers/gpu/drm/hyperv/hyperv_drm_modeset.c:152:23: warning:
'hyperv_modifiers' defined but not used [-Wunused-const-variable=]
while the variable should be used in drm_simple_display_pipe_init()
as suggested by Thomas, let's fix it.
Fixes: 76c56a5aff ("drm/hyperv: Add DRM driver for hyperv synthetic video device")
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210615031401.231751-1-pulehui@huawei.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmDGe+4eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG/IUH/iyHVulAtAhL9bnR
qL4M1kWfcG1sKS2TzGRZzo6YiUABf89vFP90r4sKxG3AKrb8YkTwmJr8B/sWwcsv
PpKkXXTobbDfpSrsXGEapBkQOE7h2w739XeXyBLRPkoCR4UrEFn68TV2rLjMLBPS
/EIZkonXLWzzWalgKDP4wSJ7GaQxi3LMx3dGAvbFArEGZ1mPHNlgWy2VokFY/yBf
qh1EZ5rugysc78JCpTqfTf3fUPK2idQW5gtHSMbyESrWwJ/3XXL9o1ET3JWURYf1
b0FgVztzddwgULoIGWLxDH5WWts3l54sjBLj0yrLUlnGKA5FjrZb12g9PdhdywuY
/8KfjeE=
=JfJm
-----END PGP SIGNATURE-----
Merge tag 'v5.13-rc6' into driver-core-next
We need the driver core fix in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For each CRTC state, check the size of Gamma and Degamma LUTs so
unexpected and larger sizes wouldn't slip through.
TEST: IGT:kms_color::pipe-invalid-gamma-lut-sizes
v2: fix assignments in if clauses, Mark's email.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mark Yacoub <markyacoub@chromium.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GECC and G6 mem training are mutually exclusive
functionalities. VBIOS/PSP will set the flag
(BOOT_CFG_FEATURE_TWO_STAGE_DRAM_TRAINING) in
runtime database to indicate whether dram memory
training need to be disabled or not.
For Navi1x families, two stage mem training is always
enabled.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PSP runtime boot_cfg_bitmask carries various psp bl
feature bit mask that can be used by driver. Cache
it in sw_init for further usage.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PSP will dump various boot up information into a
portion of local frame buffer, called runtime database.
The helper function is used for driver to query those
shared information.
v2: init ret and check !ret to exit loop as soon as
found the entry
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PSP runtime database is used to share various
boot up information with driver.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dynamic GECC allows user to specify GECC enablement
status, which will take effect in next boot cycle.
v2: initialize boot_cfg to 0xFF
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
More boot configs need to be supported via
BOOTCFG_CMD_SET
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
psp_gfx_uresp_bootcfg is used to inform driver
bootcfg settings maintained by tOS
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CoherentHostAccess flag support has moved from HSA_MEMORYPROPERTY
to HSA_CAPABILITY struct. Proper changes have made also at the thunk
to support this change.
CoherentHostAccess: whether or not device memory can be coherently
accessed by the host CPU.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
PG registers are absent in beige goby, so programming these registers
generate call trace. Fix this by adding a dummy function in dcn303
initialization function which prevents writing to non existant registers.
Fixes: cd6d421e3d ("drm/amd/display: Initial DC support for Beige Goby")
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add support to read smart shift apu and dgpu power share
on yellow_carp
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add support to read smart shift apu and dgpu power share
on renoir.
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is to fix a failure for SDMA updating PTEs.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use adev_to_drm() to get to the drm_device pointer.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
psp ring wptr is not initialized properly in ring_create,
which would lead to psp failure after several gpu reset.
[How]
Set ring_wptr to zero in psp_ring_create.
Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com>
Reviewed-by: Horace Chen <horace.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On aldebaran, only primary die fetches valid power data. Show
power/energy values as 0 on secondary die. Also, power limit should not
be set through secondary die.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As OOB(out-of-band) interface may be used to update the power limits.
Thus to make sure the power limits reporting of our driver always
reflects the correct values, the internal cache must be aligned
carefully.
V2: add support for out-of-band of other ASICs
align cached current power limit with OOB imposed
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-By: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The original code returns IP version of instantce_0 for every IP. This implementation may be correct for most of IPs.
However, for certain IP block (VCN for example), it may have 2 instances and
both of them have the same hw_id, BUT they have different revision number (0 and 1).
In this case, the original amdgpu_discovery_get_ip_version cannot correct reflects
the result and returns false information
Signed-off-by: Bokun Zhang <Bokun.Zhang@amd.com>
Signed-off-by: Peng Ju Zhou <PengJu.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For BACO scenario, PMFW will handle the dpm features disablement
and interaction with RLC properly. Driver involvement is unnecessary
and error prone.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For some ASICs, the real dpm feature disablement job is handled by
PMFW during baco reset and custom pptable loading. Cached dpm feature
status need to be updated to pair that.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To correctly kick into BACO state, the audio dev's D-state
transition(D0->D3) needs to be PMFW-aware. So, if the audio
dev entered D3 state prior to our driver, we need to bring
it back to D0 state and make sure there will be a D-state
transition on runpm suspend.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Via the fSMC_MSG_ArmD3 message, PMFW can properly act on the
Dstate change. Driver involvement for determining the timing for
BACO enter/exit is not needed.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As the fix by adding PPSMC_MSG_PrepareMp1ForUnload is proved to
be incomplete. Another fix(see link below) has been sent out.
Link: https://lore.kernel.org/linux-pci/20210602021255.939090-1-evan.quan@amd.com/
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The application should be programming the application ID, not
the kernel, as there can be several options to choose from,
and setting the application ID multiple times can cause issues.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The platform_get_irq() prints error message telling that interrupt is
missing,hence there is no need to duplicated that message in the
drivers.
Signed-off-by: Tan Zhongjun <tanzhongjun@yulong.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
- These patches make Exynos DRM driver to use pm_runtime_resume_and_get()
function instead of m_runtime_get_sync() to deal with usage counter.
pm_runtime_get_sync() increases the usage counter even when it failed,
which could make callers to forget to decrease the usage counter.
pm_runtime_resume_and_get() decreases the usage counter regardless of
whether it failed or not.
-----BEGIN PGP SIGNATURE-----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=tY/d
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-next-for-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
Two cleanups
- These patches make Exynos DRM driver to use pm_runtime_resume_and_get()
function instead of m_runtime_get_sync() to deal with usage counter.
pm_runtime_get_sync() increases the usage counter even when it failed,
which could make callers to forget to decrease the usage counter.
pm_runtime_resume_and_get() decreases the usage counter regardless of
whether it failed or not.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210611025939.393282-1-inki.dae@samsung.com
UAPI Changes:
- Disable mmap ioctl for gen12+ (excl. TGL-LP)
- Start enabling HuC loading by default for upcoming Gen12+
platforms (excludes TGL and RKL)
Core Changes:
- Backmerge of drm-next
Driver Changes:
- Revert "i915: use io_mapping_map_user" (Eero, Matt A)
- Initialize the TTM device and memory managers (Thomas)
- Major rework to the GuC submission backend to prepare
for enabling on new platforms (Michal Wa., Daniele,
Matt B, Rodrigo)
- Fix i915_sg_page_sizes to record dma segments rather
than physical pages (Thomas)
- Locking rework to prep for TTM conversion (Thomas)
- Replace IS_GEN and friends with GRAPHICS_VER (Lucas)
- Use DEVICE_ATTR_RO macro (Yue)
- Static code checker fixes (Zhihao)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YMHeDxg9VLiFtyn3@jlahtine-mobl.ger.corp.intel.com
- remove redundant NULL checks by various people
- fix sparse checker warnings from Marc
- expose more GPU ID values to userspace from Christian
- add HWDB entry for GPU found on i.MX8MP from Sascha
- rework of the linear window calculation to better deal with
systems with large regions of reserved RAM
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/f27e1ec2c2fea310bfb6fe6c99174a54e9dfba83.camel@pengutronix.de
Use pm_runtime_resume_and_get() instead of pm_runtime_get_sync()
to deal with usage counter. pm_runtime_get_sync() increases the
usage counter even when it failed, which makes callers to forget
to decrease the usage counter and resulted in reference leak.
pm_runtime_resume_and_get() function decreases the usage counter
when it failed internally so it can avoid the reference leak.
Changelog v1:
- Fix an build error reported by kernel test robot of Intel.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Reported-by: kernel test robot <lkp@intel.com>
use pm_runtime_resume_and_get() to replace pm_runtime_get_sync and
pm_runtime_put_noidle to avoid continuing to increase the refcount
when pm_runtime_get_sync fails.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
amd-drm-fixes-5.13-2021-06-09:
amdgpu:
- Use kvzmalloc in amdgu_bo_create
- Use drm_dbg_kms for reporting failure to get a GEM FB
- Fix some register offsets for Sienna Cichlid
- Fix fall-through warning
radeon:
- memcpy_to/from_io fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610035631.3943-1-alexander.deucher@amd.com
ttm and drm_auth, one off-by-x1000 fix for mcde and a fix for vc4 to
prevent an out-of-bounds access.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCYMJI5gAKCRDj7w1vZxhR
xcsYAP4wuNYRR+xk96UWrR/pdgxjwUVas6LW3DMlS+VL5sKhyAD+P0Jhapz/O2jy
xv5rdKBy91roau+8ZIln6Z1CFsOC3AI=
=/iun
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2021-06-10' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
One fix for snu4i that prevents it from probing, two locking fixes for
ttm and drm_auth, one off-by-x1000 fix for mcde and a fix for vc4 to
prevent an out-of-bounds access.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610171653.lqsoadxrhdk73cdy@gilmour
Fix the following coccicheck warning:
./drivers/gpu/drm/amd/display/dc/dml/dcn31/display_mode_vba_31.c:
3539:12-42: duplicated argument to && or ||
./drivers/gpu/drm/amd/display/dc/dml/dcn31/display_mode_vba_31.c:
5677:87-123: duplicated argument to && or ||
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use ARRAY_SIZE instead of dividing sizeof array with sizeof an
element.
Clean up the following coccicheck warning:
./drivers/gpu/drm/amd/display/dc/core/dc_resource.c:448:47-48: WARNING:
Use ARRAY_SIZE.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clean up the following includecheck warning:
./drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c: clk_mgr.h is
included more than once.
No functional change.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Perform dependent to independent throttle status translation
for aldebaran.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Perform dependent to independent throttle status translation
for renoir.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Perform dependent to independent throttle status translation
for vangogh.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Perform dependent to independent throttle status translation
for sienna cichlid.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Perform dependent to independent throttle status translation
for navi1x.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Perform dependent to independent throttle status translation
for arcturus.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Defines smu_cmn_get_indep_throttler_status which performs ASIC
independent translation given a corresponding lookup table.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add new defines for thermal throttle status bits which are ASIC
independent. This bit field will be visible to userspace via
gpu_metrics alongside the previous ASIC dependent bit fields. Seperated
into four types: power throttlers (16 bits), current throttlers (16
bits), temperature (24 bits), other (8 bits).
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch set adds support for a new ASIC independant u64 throttler
status field (indep_throttle_status). Piggybacks off the
gpu_metrics_v1_3 bump and similarly bumps gpu_metrics_v2 version (to
v2_2) to add field.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the case with xgmi connected to cpu load alternate psp fw
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes handling when page tables are in system memory.
v3: remove struct amdgpu_vm_parser.
v2: remove unwanted variable.
change amdgpu_amdkfd_validate instead of amdgpu_amdkfd_bo_validate.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A problem was reported on CoachZ devices where the display wouldn't come
up, or it would be distorted. It turns out that the PLL code here wasn't
getting called once dsi_pll_10nm_vco_recalc_rate() started returning the
same exact frequency, down to the Hz, that the bootloader was setting
instead of 0 when the clk was registered with the clk framework.
After commit 001d8dc338 ("drm/msm/dsi: remove temp data from global
pll structure") we use a hardcoded value for the parent clk frequency,
i.e. VCO_REF_CLK_RATE, and we also hardcode the value for FRAC_BITS,
instead of getting it from the config structure. This combination of
changes to the recalc function allows us to properly calculate the
frequency of the PLL regardless of whether or not the PLL has been
clk_prepare()d or clk_set_rate()d. That's a good improvement.
Unfortunately, this means that now we won't call down into the PLL clk
driver when we call clk_set_rate() because the frequency calculated in
the framework matches the frequency that is set in hardware. If the rate
is the same as what we want it should be OK to not call the set_rate PLL
op. The real problem is that the prepare op in this driver uses a
private struct member to stash away the vco frequency so that it can
call the set_rate op directly during prepare. Once the set_rate op is
never called because recalc_rate told us the rate is the same, we don't
set this private struct member before the prepare op runs, so we try to
call the set_rate function directly with a frequency of 0. This
effectively kills the PLL and configures it for a rate that won't work.
Calling set_rate from prepare is really quite bad and will confuse any
downstream clks about what the rate actually is of their parent. Fixing
that will be a rather large change though so we leave that to later.
For now, let's stash away the rate we calculate during recalc so that
the prepare op knows what frequency to set, instead of 0. This way
things keep working and the display can enable the PLL properly. In the
future, we should remove that code from the prepare op so that it
doesn't even try to call the set rate function.
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Abhinav Kumar <abhinavk@codeaurora.org>
Fixes: 001d8dc338 ("drm/msm/dsi: remove temp data from global pll structure")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210608195519.125561-1-swboyd@chromium.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
This is the 3D GPU found on the i.MX8MP SoC. The feature bits are
taken from the NXP downstream kernel driver 6.4.3.p1.305572.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
This patch eliminates the following smatch warning:
drivers/gpu/drm/drm_auth.c:320 drm_master_release() warn: unlocked access 'master' (line 318) expected lock '&dev->master_mutex'
The 'file_priv->master' field should be protected by the mutex lock to
'&dev->master_mutex'. This is because other processes can concurrently
modify this field and free the current 'file_priv->master'
pointer. This could result in a use-after-free error when 'master' is
dereferenced in subsequent function calls to
'drm_legacy_lock_master_cleanup()' or to 'drm_lease_revoke()'.
An example of a scenario that would produce this error can be seen
from a similar bug in 'drm_getunique()' that was reported by Syzbot:
https://syzkaller.appspot.com/bug?id=148d2f1dfac64af52ffd27b661981a540724f803
In the Syzbot report, another process concurrently acquired the
device's master mutex in 'drm_setmaster_ioctl()', then overwrote
'fpriv->master' in 'drm_new_set_master()'. The old value of
'fpriv->master' was subsequently freed before the mutex was unlocked.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609092119.173590-1-desmondcheongzx@gmail.com
This fixes 32-bit arm build due to lack of 64-bit divides.
Fixes: cb1c81467a ("drm/ttm: flip the switch for driver allocated resources v2")
Link: https://patchwork.freedesktop.org/patch/438442/
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Drop disabling of gfxoff during VCN use. This allows gfxoff
to kick in and potentially save power if the user is not using
gfx for color space conversion or scaling.
VCN1.0 had a bug which prevented it from working properly with
gfxoff, so we disabled it while using VCN. That said, most apps
today use gfx for scaling and color space conversion rather than
overlay planes so it was generally in use anyway. This was fixed
on VCN2+, but since we mostly use gfx for color space conversion
and scaling and rapidly powering up/down gfx can negate the
advantages of gfxoff, we left gfxoff disabled. As more
applications use overlay planes for color space conversion
and scaling, this starts to be a win, so go ahead and leave
gfxoff enabled.
Note that VCN1.0 uses vcn_v1_0_idle_work_handler() and
vcn_v1_0_ring_begin_use() so they are not affected by this
patch.
Reviewed-by: James Zhu <James.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Boyuan Zhang <Boyuan.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The meaning of 'default' for the enable_guc module parameter has been
updated to accurately reflect what is supported on current platforms.
So start using the defaults instead of forcing everything off.
Although, note that right now, the default is for everything to be off
anyway. So this is not a change for current platforms.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210603164812.19045-2-matthew.brost@intel.com
We currently treat same slice mask as a same DBuf state and skip
updating the Dbuf slices, if we detect that.
This is wrong as if we have a multi to single pipe change or
vice versa, that would be treated as a same Dbuf state and thus
no changes required, so we don't get Mbus updated, causing issues.
Solution: check also mbus_join, in addition to slices mask.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210527110106.21434-1-stanislav.lisovskiy@intel.com
CDCLK crawl feature allows to change CDCLK frequency
without disabling the actual PLL and doesn't require
a full modeset.
v2: - Added has_cdclk_crawl as a feature flag to
intel_device_info(Matt Roper)
- s/gen13_cdclk_pll_crawl/adlp_cdclk_pll_crawl/
(Matt Roper)
Cc: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210603065038.7298-1-stanislav.lisovskiy@intel.com
The calclulation of how many bytes we stuff into the
DSI pipeline for video mode panels is off by three
orders of magnitude because we did not account for the
fact that the DRM mode clock is in kilohertz rather
than hertz.
This used to be:
drm_mode_vrefresh(mode) * mode->htotal * mode->vtotal
which would become for example for s6e63m0:
60 x 514 x 831 = 25628040 Hz, but mode->clock is
25628 as it is in kHz.
This affects only the Samsung GT-I8190 "Golden" phone
right now since it is the only MCDE device with a video
mode display.
Curiously some specimen work with this code and wild
settings in the EOL and empty packets at the end of the
display, but I have noticed an eeire flicker until now.
Others were not so lucky and got black screens.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reported-by: Stephan Gerhold <stephan@gerhold.net>
Fixes: 920dd1b142 ("drm/mcde: Use mode->clock instead of reverse calculating it from the vrefresh")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210608213318.3897858-1-linus.walleij@linaro.org
This change takes care of resetting the dss_ctl registers
in case of dsc_disable, bigjoiner disable and also
uncompressed joiner disable.
v2: Fix formatting
v3: Fix the typo (Mansi)
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Fixes: d961eb20ad ("drm/i915/bigjoiner: atomic commit changes for uncompressed joiner")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3537
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609065914.4454-1-vandita.kulkarni@intel.com
The object surf is not fully initialized and the uninitialized
field surf.data is being copied by the call to qxl_bo_create
via the call to qxl_gem_object_create. Set surf.data to zero
to ensure garbage data from the stack is not being copied.
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: f64122c1f6 ("drm: add new QXL driver. (v1.4)")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210608161313.161922-1-colin.king@canonical.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If a6xx_hw_init() fails before creating the shadow_bo, the a6xx_pm_suspend
code referencing it will crash. Change the condition to one that avoids
this problem (note: creation of shadow_bo is behind this same condition)
Fixes: e8b0b994c3 ("drm/msm/a6xx: Clear shadow on suspend")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Akhil P Oommen <akhilpo@codeaurora.org>
Link: https://lore.kernel.org/r/20210513171431.18632-6-jonathan@marek.ca
Signed-off-by: Rob Clark <robdclark@chromium.org>
Value was shifted in the wrong direction, resulting in the field always
being zero, which is incorrect for A650.
Fixes: d0bac4e9cd ("drm/msm/a6xx: set ubwc config for A640 and A650")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Akhil P Oommen <akhilpo@codeaurora.org>
Link: https://lore.kernel.org/r/20210513171431.18632-4-jonathan@marek.ca
Signed-off-by: Rob Clark <robdclark@chromium.org>
Update CP_PROTECT register programming based on downstream.
A6XX_PROTECT_RW is renamed to A6XX_PROTECT_NORDWR to make things aligned
and also be more clear about what it does.
Note that this required switching to use the CP_ALWAYS_ON_COUNTER as the
GMU counter is not accessible from the cmdstream. Which also means
using the CPU counter for the msm_gpu_submit_flush() tracepoint (as
catapult depends on being able to compare this to the start/end values
captured in cmdstream). This may need to be revisited when IFPC is
enabled.
Also, compared to downstream, this opens up CP_PERFCTR_CP_SEL as the
userspace performance tooling (fdperf and pps-producer) expect to be
able to configure the CP counters.
Fixes: 4b565ca5a2 ("drm/msm: Add A6XX device support")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Akhil P Oommen <akhilpo@codeaurora.org>
Link: https://lore.kernel.org/r/20210513171431.18632-5-jonathan@marek.ca
[switch to CP_ALWAYS_ON_COUNTER, open up CP_PERFCNTR_CP_SEL, and spiff
up commit msg]
Signed-off-by: Rob Clark <robdclark@chromium.org>
I met a gpu addr bug recently and the kernel log
tells me the pc is memcpy/memset and link register is
radeon_uvd_resume.
As we know, in some architectures, optimized memcpy/memset
may not work well on device memory. Trival memcpy_toio/memset_io
can fix this problem.
BTW, amdgpu has already done it in:
commit ba0b2275a6 ("drm/amdgpu: use memcpy_to/fromio for UVD fw upload"),
that's why it has no this issue on the same gpu and platform.
Signed-off-by: Chen Li <chenli@uniontech.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of letting the code fall
through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
RLC_CP_SCHEDULERS and RLC_SPARE_INT0 have different
offsets for Sienna Cichlid
Signed-off-by: Rohit Khaire <rohit.khaire@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm_err meant broken user space could spam dmesg.
Fixes: f258907fdd "drm/amdgpu: Verify bo size can fit framebuffer size on init."
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It will cause error when alloc memory larger than 128KB in
amdgpu_bo_create->kzalloc. So it needs to switch kzalloc to kvzalloc.
Call Trace:
alloc_pages_current+0x6a/0xe0
kmalloc_order+0x32/0xb0
kmalloc_order_trace+0x1e/0x80
__kmalloc+0x249/0x2d0
amdgpu_bo_create+0x102/0x500 [amdgpu]
? xas_create+0x264/0x3e0
amdgpu_bo_create_vm+0x32/0x60 [amdgpu]
amdgpu_vm_pt_create+0xf5/0x260 [amdgpu]
amdgpu_vm_init+0x1fd/0x4d0 [amdgpu]
Signed-off-by: Changfeng <Changfeng.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
AUX logic is often clocked from cdclk. Disable PSR to make sure
there are no hw initiated AUX transactions in flight while we
change the cdclk frequency.
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210608085415.515342-2-gwan-gyeong.mun@intel.com
This introduces the following function that can exit and activate a psr
source when intel_psr is already enabled.
- intel_psr_pause(): Pause current PSR. It deactivates current psr state.
- intel_psr_resume(): Resume paused PSR. It activates paused psr state.
v2: Address Jose's review comment.
- Remove unneeded changes around the intel_psr_enable().
- Add intel_psr_post_exit() which processes waiting until PSR is idle
and WA for SelectiveFetch.
v3: Address Jose's review comment.
- Rename intel_psr_post_exit() to intel_psr_wait_exit_locked().
- Move WA_1408330847 to intel_psr_disable_locked()
- If the PSR is paused by an explicit intel_psr_paused() call, make the
intel_psr_flush() not to activate PSR.
v4: Address Jose's review comment.
- In order to avoid the scenario of PSR is not active but there is a
scheduled psr->work, it changes the check routine of intel_psr_pause()
for PSR's enablement from "psr->active" to "psr->enable".
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210608085415.515342-1-gwan-gyeong.mun@intel.com
There is not much value in the extra conversion step, the calculations
required for the LTDC IP are different than what is used in the
drm_display_mode_to_videomode(), so just do the right ones in the LTDC
driver right away.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Antonio Borneo <antonio.borneo@foss.st.com>
Cc: Benjamin Gaignard <benjamin.gaignard@foss.st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Philippe Cornu <philippe.cornu@foss.st.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Vincent Abriou <vincent.abriou@foss.st.com>
Cc: Yannick Fertre <yannick.fertre@foss.st.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
To: dri-devel@lists.freedesktop.org
Tested-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210607172457.14471-1-marex@denx.de
This is similar to IH_RB_CNTL programming in
navi10_ih_toggle_ring_interrupts
Signed-off-by: Rohit Khaire <rohit.khaire@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Horace Chen <horace.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To support a new visual confirm mode: swizzle to show the specific
color at the screen border according to different surface swizzle mode.
Currently we only support the Linear mode with red color.
Signed-off-by: Po-Ting Chen <robin.chen@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
- Commit from userspace could cause link stream to disable and hdcp
auth to reset when the HDCP has already been enabled at the moment.
CP should fall back to DESIRED from ENABLED in such cases.
- This change was previously reverted due to a regression caused, which
has now been cleared.
[HOW]
In hdcp display removal, change CP to DESIRED if at the moment CP
is ENABLED before the auth reset and removal of linked list element.
Signed-off-by: Dingchen (David) Zhang <dingchen.zhang@amd.com>
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There is an assert in cases where transition from ODM 2:1
to ODM 1:1 (bypass)
[How]
Remove assert since this case is now valid.
Update diags tests for ODM transitions.
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Found a use case (IPKVM) that DP-VGA active dongle does
not return any EDID and the mentioned commit broke it.
[How]
This reverts "Disconnect non-DP with no EDID"
Signed-off-by: Roy Chan <roy.chan@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add debugfs entry to force dsc decoding at PCON when DSC capable
external RX is connected. In such case, it is free to test DSC
decoding at external RX or at PCON.
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When calculating recout width for an MPO plane on a mode that's using
ODM combine, driver can calculate a negative value, resulting in a
crash.
[How]
For negative widths, use zero such that validation will prune the
configuration correctly and disallow MPO.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
For DCN30 and later, there is no data in DML arrays indexed by state at
index num_states.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
DISPCLK_MAX_ERRDET_CYCLES must be 7 to prevent connection loss when
changing DENTIST_DISPCLK_WDIVIDER from 126 to 127 and back.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
HW has handed down a new sequence that requires access to these
registers.
v2: squash in DCN3.1 fixes (Alex)
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
HW has handed down a new sequence which requires access to the FIFO
ERRDET SW Override register.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Rearranging pipes with multiple displays and multiple planes cannot be
done atomically and requires a much improved sequence to deal with it.
[How]
To workaround such issues, prefer avoid pipe-split policy for
multidisplay scenarios.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
When OS overrides training link training parameters
for MST device to SST mode, MST resources are not
released and leak of the resource may result crash and
incorrect MST discovery during following hot plugs.
[how]
Retaining sink object to be reused by SST link and
releasing MST resources.
Signed-off-by: Vladimir Stempen <vladimir.stempen@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Allow specifying which panel to take PSR Residency
measurements from.
[how]
Pass panel instance to DMUB through GPINT in the upper
8 bits of the parameter.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[How]
Add call to get the last used VTOTAL from DC
Signed-off-by: Jayendran Ramani <Jayendran.Ramani@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
SET_CONFIG transactions with DMUB is not used and removed.
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We update scaling settings when scaling mode has been changed.
However when changing mode from native resolution the scaling mode previously
set gets ignored.
[How]
Perform scaling settings update on modeset.
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add support for transmitting training pattern sequences for links whose
encoders have been dynamically assigned.
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add functionality useful for DP equalization phase of link training to
public interface.
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This change was found to break some high-refresh modes. Reverting
to unblock mainline.
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Reviewed-by: Sung Lee <Sung.Lee@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Currently there is no way to visually identify if there is one or more
layers presented fullscreen on the display
[HOW]
Add new visual confirm colors in get_surface_visual_confirm_color for
planes with layer_index > 0
Signed-off-by: Evgenii Krasnikov <Evgenii.Krasnikov@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a time-of-check-to-time-of-use error in drm_getunique() due
to retrieving file_priv->master prior to locking the device's master
mutex.
An example can be seen in the crash report of the use-after-free error
found by Syzbot:
https://syzkaller.appspot.com/bug?id=148d2f1dfac64af52ffd27b661981a540724f803
In the report, the master pointer was used after being freed. This is
because another process had acquired the device's master mutex in
drm_setmaster_ioctl(), then overwrote fpriv->master in
drm_new_set_master(). The old value of fpriv->master was subsequently
freed before the mutex was unlocked.
To fix this, we lock the device's master mutex before retrieving the
pointer from from fpriv->master. This patch passes the Syzbot
reproducer test.
Reported-by: syzbot+c3a706cec1ea99e1c693@syzkaller.appspotmail.com
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210608110436.239583-1-desmondcheongzx@gmail.com
[Why + How]
Visual confirm has no asic-specific logic,
so we can refactor and unify these functions
that are currently spread out across multiple
dcn files.
Add a new hw sequencer interface update_visual_confirm_color,
and a new mpc function pointer set_bg_color.
This will allow visual confirm to updated independently
of MPCC blending updates.
v2: squash in DCN3.1 fixes
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This disablement would be specific for Nav10 and shouldn’t be propagated to the other programs.
[How]
Power gating is controlled by driver.
Signed-off-by: JinZe.Xu <JinZe.Xu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
DSCCLK validation is not necessary because DSCCLK is derrived from
DISPCLK, therefore if DISPCLK validation passes, DSCCLK is valid, too.
Doing DSCLK validation in addition to DISPCLK leads to modes being
wrongly rejected when DSCCLK was incorrectly set outside of DML.
[how]
Remove DSCCLK validation because it's implicitly validated under DISPCLK
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Some DPRX will issue CP_IRQ when user disconnects a display
that has been authenticated.
Since display is being disconnecting dpcd read will fail.
This will cause us to attempt HDCP retry on disconnection.
We are adding a 100ms delay before retry.
So we will only start retry if within 100ms there is no disconnection call
to HDCP module.
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Updating PSR interfaces to allow PSR enablement
per eDP panel.
[how]
- Copying PSR command structures to DC
- Changing function interfaces to pass panel instance
- Communicating with DMUB per link instead of assuming
to use a single one
-Iterating through all PSR capable panels when enabling/disabling
all
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During DCC on/off, stutter period is calculated before DCC has fully transitioned.
This results in incorrect stutter period calculation.
[How]
Trigger a full update when DCC changes between on/off.
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
psp added new feature to check fw buffer address for sriov vf. the
address range must be in vf fb.
Signed-off-by: Zhigang Luo <zhigang.luo@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-By : Shaoyun.liu <shaoyunl@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
need to load xgmi ta for aldebaran sriov vf.
Signed-off-by: Zhigang Luo <zhigang.luo@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-By : Shaoyun.liu <shaoyunl@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
host driver programmed mmhub system aperture and fb location for vf, no
need to program in guest side.
Signed-off-by: Zhigang Luo <zhigang.luo@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-By : Shaoyun.liu <shaoyunl@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
host driver programmed the gfxhub fb location for vf, no need to
program in guest side.
Signed-off-by: Zhigang Luo <zhigang.luo@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-By : Shaoyun.liu <shaoyunl@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
host driver programmed fb location registers for vf, no need to
check anymore.
Signed-off-by: Zhigang Luo <zhigang.luo@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-By : Shaoyun.liu <shaoyunl@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kernel test robot throws warning ->
>> drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu13/yellow_carp_ppt.c:483:2:
warning: variable 'member_type' is used uninitialized whenever switch
default is taken [-Wsometimes-uninitialized]
default:
^~~~~~~
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu13/yellow_carp_ppt.c:487:47:
note: uninitialized use occurs here
return yellow_carp_get_smu_metrics_data(smu, member_type, value);
^~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu13/yellow_carp_ppt.c:465:2:
note: variable 'member_type' is declared here
MetricsMember_t member_type;
^
1 warning generated.
Fix this warning by return errno when the clk type is unsupported.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Create shadow BOs only for no-compute VM context and only for dGPU.
The existing if-condition would create shadow bo for compute context
on dGPU which not what we wanted.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Match the order of definition to the structure's declaration to
help with locating included and missing functions of the API
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In vc4_atomic_commit_tail() we iterate of the set of old CRTCs, and
attempt to wait on any channels which are still in use. When we iterate
over the CRTCs, we have:
* `i` - the index of the CRTC
* `channel` - the channel a CRTC is using
When we check the channel state, we consult:
old_hvs_state->fifo_state[channel].in_use
... but when we wait for the channel, we erroneously wait on:
old_hvs_state->fifo_state[i].pending_commit
... rather than:
old_hvs_state->fifo_state[channel].pending_commit
... and this bogus access has been observed to result in boot-time hangs
on some arm64 configurations, and can be detected using KASAN. FIx this
by using the correct index.
I've tested this on a Raspberry Pi 3 model B v1.2 with KASAN.
Trimmed KASAN splat:
| ==================================================================
| BUG: KASAN: slab-out-of-bounds in vc4_atomic_commit_tail+0x1cc/0x910
| Read of size 8 at addr ffff000007360440 by task kworker/u8:0/7
| CPU: 2 PID: 7 Comm: kworker/u8:0 Not tainted 5.13.0-rc3-00009-g694c523e7267 #3
|
| Hardware name: Raspberry Pi 3 Model B (DT)
| Workqueue: events_unbound deferred_probe_work_func
| Call trace:
| dump_backtrace+0x0/0x2b4
| show_stack+0x1c/0x30
| dump_stack+0xfc/0x168
| print_address_description.constprop.0+0x2c/0x2c0
| kasan_report+0x1dc/0x240
| __asan_load8+0x98/0xd4
| vc4_atomic_commit_tail+0x1cc/0x910
| commit_tail+0x100/0x210
| ...
|
| Allocated by task 7:
| kasan_save_stack+0x2c/0x60
| __kasan_kmalloc+0x90/0xb4
| vc4_hvs_channels_duplicate_state+0x60/0x1a0
| drm_atomic_get_private_obj_state+0x144/0x230
| vc4_atomic_check+0x40/0x73c
| drm_atomic_check_only+0x998/0xe60
| drm_atomic_commit+0x34/0x94
| drm_client_modeset_commit_atomic+0x2f4/0x3a0
| drm_client_modeset_commit_locked+0x8c/0x230
| drm_client_modeset_commit+0x38/0x60
| drm_fb_helper_set_par+0x104/0x17c
| fbcon_init+0x43c/0x970
| visual_init+0x14c/0x1e4
| ...
|
| The buggy address belongs to the object at ffff000007360400
| which belongs to the cache kmalloc-128 of size 128
| The buggy address is located 64 bytes inside of
| 128-byte region [ffff000007360400, ffff000007360480)
| The buggy address belongs to the page:
| page:(____ptrval____) refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x7360
| flags: 0x3fffc0000000200(slab|node=0|zone=0|lastcpupid=0xffff)
| raw: 03fffc0000000200 dead000000000100 dead000000000122 ffff000004c02300
| raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
| page dumped because: kasan: bad access detected
|
| Memory state around the buggy address:
| ffff000007360300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
| ffff000007360380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
| >ffff000007360400: 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc
| ^
| ffff000007360480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
| ffff000007360500: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
| ==================================================================
Link: https://lore.kernel.org/r/4d0c8318-bad8-2be7-e292-fc8f70c198de@samsung.com
Link: https://lore.kernel.org/linux-arm-kernel/20210607151740.moncryl5zv3ahq4s@gilmour
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Emma Anholt <emma@anholt.net>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Will Deacon <will@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Acked-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210608085513.2069-1-mark.rutland@arm.com
We need to grab the resv lock first before doing that check.
v2 (chk): simplify the change for -fixes
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210528130041.1683-1-christian.koenig@amd.com
Fix checkpatch.pl --strict -f drivers/gpu/drm/bridge/ti-sn65dsi83.c
CHECKs, no functional change. This is the same modification done
to V7 of the original patch.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Adam Ford <aford173@gmail.com>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Frieder Schrempf <frieder.schrempf@kontron.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Loic Poulain <loic.poulain@linaro.org>
Cc: Marek Vasut <marex@denx.de>
Cc: Philippe Schenker <philippe.schenker@toradex.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Valentin Raevsky <valentin@compulab.co.il>
To: dri-devel@lists.freedesktop.org
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210608095322.23644-1-marex@denx.de
We discussed if that is really the right approach for quite a while now, but
digging deeper into a bug report on arm turned out that this is actually
horrible broken right now.
The reason for this is that vmf_insert_mixed_prot() always tries to grab
a reference to the underlaying page on architectures without
ARCH_HAS_PTE_SPECIAL and as far as I can see also enabled GUP.
So nuke using VM_MIXEDMAP here and use VM_PFNMAP instead.
Also make sure to reject mappings without VM_SHARED.
v2: reject COW mappings, merge function with only caller
v3: adjust comment as suggested by Thomas
Signed-off-by: Christian König <christian.koenig@amd.com>
Bugs: https://gitlab.freedesktop.org/drm/amd/-/issues/1606#note_936174
Link: https://patchwork.freedesktop.org/patch/msgid/20210607135830.8574-1-christian.koenig@amd.com
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Add driver for TI SN65DSI83 Single-link DSI to Single-link LVDS bridge
and TI SN65DSI84 Single-link DSI to Dual-link or 2x Single-link LVDS
bridge. TI SN65DSI85 is unsupported due to lack of hardware to test on,
but easy to add.
The driver operates the chip via I2C bus. Currently the LVDS clock are
always derived from DSI clock lane, which is the usual mode of operation.
Support for clock from external oscillator is not implemented, but it is
easy to add if ever needed. Only RGB888 pixel format is implemented, the
LVDS666 is not supported, but could be added if needed.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Tested-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Loic Poulain <loic.poulain@linaro.org>
Cc: Philippe Schenker <philippe.schenker@toradex.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Valentin Raevsky <valentin@compulab.co.il>
To: dri-devel@lists.freedesktop.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210607174258.16300-2-marex@denx.de
There are two spelling mistakes in dml_print messages, fix these and
clear up checkpatch warning on overly wide line length.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
s/than/then/
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clean up the following includecheck warning:
./drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c:
dce110_hw_sequencer.h is included more than once.
No functional change.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the parameter table_freed description on function description.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kfd_svm.h is included duplicately in commit 42de677f79
("drm/amdkfd: register svm range").
After checking possible related header files,
remove the former one to make the code format more reasonable.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For GTT allocations with a GART address the res contains the VMID0
addresses and can't be used for VM handling.
So ignore the res when the pages array is given or we fill the page
tables with nonsense.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The NV12 and VEGA10 share the same interface W/RREG32_SOC15*,
the callback functions in these macros may not be defined,
so NULL pointer must be checked but not in
macro __WREG32_SOC15_RLC__, fixing the lock of NULL pointer check.
Signed-off-by: Peng Ju Zhou <PengJu.Zhou@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Disable support on APU
Reviewed-by: Changfeng <Changfeng.Zhu@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Follow the same apporach as GFX to handle SDMA
poison consumption. Send SIGBUS to application
when receives SDMA_ECC interrupt and issue gpu
reset either mode 2 or mode 1 to get the engine
back
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Dennis Li<dennis.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
prange->offset is for VRAM range mm_nodes, if multiple ranges share same
mm_nodes, migrate range back to VRAM will reuse the VRAM at offset of
the same mm_nodes. For system memory pages_addr array, the offset is
always 0, otherwise, update GPU mapping will use incorrect system memory
page, and cause system memory corruption.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In SRIOV environment, KMD should access SDMA registers
through RLCG if GC indirect access flag enabled.
Using _SOC15 read/write macros ensures that they go
through RLC when the flag is enabled.
Signed-off-by: Rohit Khaire <rohit.khaire@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
intel_dp_set_infoframes() call in intel_ddi_post_disable_dp() will
take care to disable all enabled infoframes.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514232247.144542-4-jose.souza@intel.com
When PSR is enabled it handles DP_SDP_VSC, changing revision and all
the other fields as necessary.
It can also enabled and disable this SDP as needed without a full
modeset.
So here masking DP_SDP_VSC bit when previous and future state PSR
enabled, it will still be checked when comparing the asked state
to what was programmed to hardware.
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: 78b772e1a0 ("drm/i915/display: Fill PSR state during hardware configuration read out")
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514232247.144542-2-jose.souza@intel.com
Commit 78b772e1a0 ("drm/i915/display: Fill PSR state during hardware
configuration read out") is not allowing fastsets to happen when PSR
states changes but PSR is a feature that can be enabled and disabled
during fastsets.
So here moving the PSR pipe conf checks to a block that is only
executed when checking if HW state matches with requested state, not
during the phase where it checks if fastset is possible or not.
There still a state mismatch not allowing fastsets between states
turning off or on PSR because of crtc_state->infoframes.enable
BIT(DP_SDP_VSC) but at least for now it will allow a fastset between
PSR1 <-> PSR2, that is a case heavilly used by CI due to pipe CRC not
work with PSR2, but the remaning issue will be fixed in a future patch.
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: 78b772e1a0 ("drm/i915/display: Fill PSR state during hardware configuration read out")
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514232247.144542-1-jose.souza@intel.com
Virtual device inform if screen update is needed or not with
SYNTHVID_FEATURE_CHANGE message. Handle this message to set dirt_needed
flag.
Suggested-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Deepak Rawat <drawat.floss@gmail.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210527112230.1274-2-drawat.floss@gmail.com
DRM driver for hyperv synthetic video device, based on hyperv_fb
framebuffer driver. Also added config option "DRM_HYPERV" to enabled
this driver.
v2:
- Add support for gen2 VM
- Fixed review comments
v3:
- Split into multiple files as suggested by Thomas Zimmermann
- Fixed hibernation issue as suggested by Dexuan Cui
- Use ioremap_cache as suggested by Dexuan Cui
- Incorporated other review comments
v4:
- Fix bitrotted code
- Review comments
- Updated the copyright and license to match hyperv_fb
v5:
- Address review comments and rebased with drm-misc-next
v6:
- Minor code/comment improvement as suggested by Dexuan Cui
Signed-off-by: Deepak Rawat <drawat.floss@gmail.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210527112230.1274-1-drawat.floss@gmail.com
We are calling the eviction_valuable driver callback at eviction time to
determine whether we actually can evict a buffer object.
The upcoming i915 TTM backend needs the same functionality for swapout,
and that might actually be beneficial to other drivers as well.
Add an eviction_valuable call also in the swapout path. Try to keep the
current behaviour for all drivers by returning true if the buffer object
is already in the TTM_PL_SYSTEM placement. We change behaviour for the
case where a buffer object is in a TT backed placement when swapped out,
in which case the drivers normal eviction_valuable path is run.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20210602083818.241793-8-thomas.hellstrom@linux.intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20210602083818.241793-8-thomas.hellstrom@linux.intel.com
If the bo is idle when calling ttm_bo_pipeline_gutting(), we unnecessarily
create a ghost object and push it out to delayed destroy.
Fix this by adding a path for idle, and document the function.
Also avoid having the bo end up in a bad state vulnerable to user-space
triggered kernel BUGs if the call to ttm_tt_create() fails.
Finally reuse ttm_bo_pipeline_gutting() in ttm_bo_evict().
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20210602083818.241793-7-thomas.hellstrom@linux.intel.com
Reading out of write-combining mapped memory is typically very slow
since the CPU doesn't prefetch. However some archs have special
instructions to do this.
So add a best-effort memcpy_from_wc taking dma-buf-map pointer
arguments that attempts to use a fast prefetching memcpy and
otherwise falls back to ordinary memcopies, taking the iomem tagging
into account.
The code is largely copied from i915_memcpy_from_wc.
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Christian König <christian.koenig@amd.com>
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Link: https://lore.kernel.org/r/20210602083818.241793-5-thomas.hellstrom@linux.intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20210602083818.241793-5-thomas.hellstrom@linux.intel.com
The internal ttm_bo_util memcpy uses ioremap functionality, and while it
probably might be possible to use it for copying in- and out of
sglist represented io memory, using io_mem_reserve() / io_mem_free()
callbacks, that would cause problems with fault().
Instead, implement a method mapping page-by-page using kmap_local()
semantics. As an additional benefit we then avoid the occasional global
TLB flushes of ioremap() and consuming ioremap space, elimination of a
critical point of failure and with a slight change of semantics we could
also push the memcpy out async for testing and async driver development
purposes.
A special linear iomem iterator is introduced internally to mimic the
old ioremap behaviour for code-paths that can't immediately be ported
over. This adds to the code size and should be considered a temporary
solution.
Looking at the code we have a lot of checks for iomap tagged pointers.
Ideally we should extend the core memremap functions to also accept
uncached memory and kmap_local functionality. Then we could strip a
lot of code.
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20210602083818.241793-4-thomas.hellstrom@linux.intel.com
Fix the following coccicheck warning:
./drivers/gpu/drm/i915/display/intel_display_power.c:3081:1-28:
duplicated argument to & or |
This commit fixes duplicate argument. It might be a typo.
But what I can do is to remove it now.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210605032209.16111-1-wanjiabing@vivo.com
On sunxi boards that use HDMI output, HDMI device probe keeps being
avoided indefinitely with these repeated messages in dmesg:
platform 1ee0000.hdmi: probe deferral - supplier 1ef0000.hdmi-phy
not ready
There's a fwnode_link being created with fw_devlink=on between hdmi
and hdmi-phy nodes, because both nodes have 'compatible' property set.
Fw_devlink code assumes that nodes that have compatible property
set will also have a device associated with them by some driver
eventually. This is not the case with the current sun8i-hdmi
driver.
This commit makes sun8i-hdmi-phy into a proper platform device
and fixes the display pipeline probe on sunxi boards that use HDMI.
More context: https://lkml.org/lkml/2021/5/16/203
Signed-off-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Ondrej Jirman <megous@megous.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210607085836.2827429-1-megous@megous.com
Currently only linear formats are supported in sun4i-drm driver, but
SoCs like H6 supports AFBC variant of some of them in multiple cores
(GPU, VPU, DE3). Panfrost already implements AFBC compression and is
sometimes confused what should be default choice (linear, AFBC) if DRM
driver is not explicit about modifier support (MiniMyth2 distro with
MythTV app).
After some discussion with Daniel Stone on #panfrost IRC, it was decided
to make modifiers in sun4i-drm explicit, to avoid any kind of guessing,
not just in panfrost, but everywhere. In fact, long term idea is to make
modifier parameter in drm_universal_plane_init() mandatory (non NULL).
Signed-off-by: Piotr Oniszczuk <piotr.oniszczuk@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210605073534.3786194-1-jernej.skrabec@gmail.com
The new gpiod interface takes care of parsing the GPIO flags and to
return the logical value when accessing an active-low GPIO, so switching
to it simplifies a lot the driver.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210524131852.263883-2-maxime@cerno.tech
If the of_get_named_gpio_flags call fails in vc4_hdmi_bind, we jump to
the err_unprepare_hsm label. That label will then call
pm_runtime_disable and put_device on the DDC device.
We just retrieved the DDC device, so the latter is definitely justified.
However at that point we still haven't called pm_runtime_enable, so the
call to pm_runtime_disable is not supposed to be there.
Fixes: 10ee275cb1 ("drm/vc4: prepare for CEC support")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210524131852.263883-1-maxime@cerno.tech
This was done by the following semantic patch:
@@ expression i915; @@
- INTEL_GEN(i915)
+ GRAPHICS_VER(i915)
@@ expression i915; expression E; @@
- INTEL_GEN(i915) >= E
+ GRAPHICS_VER(i915) >= E
@@ expression dev_priv; expression E; @@
- !IS_GEN(dev_priv, E)
+ GRAPHICS_VER(dev_priv) != E
@@ expression dev_priv; expression E; @@
- IS_GEN(dev_priv, E)
+ GRAPHICS_VER(dev_priv) == E
@@
expression dev_priv;
expression from, until;
@@
- IS_GEN_RANGE(dev_priv, from, until)
+ IS_GRAPHICS_VER(dev_priv, from, until)
@def@
expression E;
identifier id =~ "^gen$";
@@
- id = GRAPHICS_VER(E)
+ ver = GRAPHICS_VER(E)
@@
identifier def.id;
@@
- id
+ ver
It also takes care of renaming the variable we assign to GRAPHICS_VER()
so to use "ver" rather than "gen".
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210606045050.103862-2-lucas.demarchi@intel.com
The functions can be called both in _rcu context as well
as while holding the lock.
v2: add some kerneldoc as suggested by Daniel
v3: fix indentation
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602111714.212426-7-christian.koenig@amd.com
When the comment needs to state explicitly that this is doesn't get a reference
to the object then the function is named rather badly.
Rename the function and use it in even more places.
v2: use dma_resv_shared_list as new name
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602111714.212426-5-christian.koenig@amd.com
When the comment needs to state explicitly that this
doesn't get a reference to the object then the function
is named rather badly.
Rename the function and use rcu_dereference_check(), this
way it can be used from both rcu as well as lock protected
critical sections.
v2: improve kerneldoc as suggested by Daniel
v3: use dma_resv_excl_fence as function name
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602111714.212426-4-christian.koenig@amd.com
This was done by the following semantic patch:
@@ expression i915; @@
- INTEL_GEN(i915)
+ GRAPHICS_VER(i915)
@@ expression i915; expression E; @@
- INTEL_GEN(i915) >= E
+ GRAPHICS_VER(i915) >= E
@@ expression dev_priv; expression E; @@
- !IS_GEN(dev_priv, E)
+ GRAPHICS_VER(dev_priv) != E
@@ expression dev_priv; expression E; @@
- IS_GEN(dev_priv, E)
+ GRAPHICS_VER(dev_priv) == E
@@
expression dev_priv;
expression from, until;
@@
- IS_GEN_RANGE(dev_priv, from, until)
+ IS_GRAPHICS_VER(dev_priv, from, until)
@def@
expression E;
identifier id =~ "^gen$";
@@
- id = GRAPHICS_VER(E)
+ ver = GRAPHICS_VER(E)
@@
identifier def.id;
@@
- id
+ ver
It also takes care of renaming the variable we assign to GRAPHICS_VER()
so to use "ver" rather than "gen".
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210605155356.4183026-4-lucas.demarchi@intel.com
This was done by the following semantic patch:
@@ expression i915; @@
- INTEL_GEN(i915)
+ GRAPHICS_VER(i915)
@@ expression i915; expression E; @@
- INTEL_GEN(i915) >= E
+ GRAPHICS_VER(i915) >= E
@@ expression dev_priv; expression E; @@
- !IS_GEN(dev_priv, E)
+ GRAPHICS_VER(dev_priv) != E
@@ expression dev_priv; expression E; @@
- IS_GEN(dev_priv, E)
+ GRAPHICS_VER(dev_priv) == E
@@
expression dev_priv;
expression from, until;
@@
- IS_GEN_RANGE(dev_priv, from, until)
+ IS_GRAPHICS_VER(dev_priv, from, until)
@def@
expression E;
identifier id =~ "^gen$";
@@
- id = GRAPHICS_VER(E)
+ ver = GRAPHICS_VER(E)
@@
identifier def.id;
@@
- id
+ ver
It also takes care of renaming the variable we assign to GRAPHICS_VER()
so to use "ver" rather than "gen".
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210605155356.4183026-2-lucas.demarchi@intel.com
This was done by the following semantic patch:
@@ expression i915; @@
- INTEL_GEN(i915)
+ GRAPHICS_VER(i915)
@@ expression i915; expression E; @@
- INTEL_GEN(i915) >= E
+ GRAPHICS_VER(i915) >= E
@@ expression dev_priv; expression E; @@
- !IS_GEN(dev_priv, E)
+ GRAPHICS_VER(dev_priv) != E
@@ expression dev_priv; expression E; @@
- IS_GEN(dev_priv, E)
+ GRAPHICS_VER(dev_priv) == E
@@
expression dev_priv;
expression from, until;
@@
- IS_GEN_RANGE(dev_priv, from, until)
+ IS_GRAPHICS_VER(dev_priv, from, until)
@def@
expression E;
identifier id =~ "^gen$";
@@
- id = GRAPHICS_VER(E)
+ ver = GRAPHICS_VER(E)
@@
identifier def.id;
@@
- id
+ ver
It also takes care of renaming the variable we assign to GRAPHICS_VER()
so to use "ver" rather than "gen".
Cc: intel-gvt-dev@lists.freedesktop.org
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210603165428.3625495-5-lucas.demarchi@intel.com
Port the necessary changes from previous DCN versions.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To enable output on real display instead of virtual.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To enable compiling and using DCN3.1 ASICs with physical output.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To detect DCN3.1 ASICs and to enable the appropriate number of CRTCs,
pick the right validation paths for display formats and to use the
right DC interfaces.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Container for hardware resources and blocks for DCN3.1, also adds
new DC debug flags used with DCN3.1.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DMCUB has a deferred z10 restore process that needs signalling from
driver to occur. This needs to be done on any interface that programs
the hardware state or sequences where we expect to have the same
hardware state as before.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add DCN3.1 specific hardware sequence programming - extending off of
our existing DCN3/DCN2 support.
Extend stream hardware sequencing to include new DCCG programming.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Updated interfaces for multiple eDP backlight caps.
Added support for interpreting the new BIOS command tables on DCN3.1.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
New DTM interface is V3 and we need to extend our existing support
to enable HDCP on DCN3.1.
Version the helpers and fallback to the older versions on failure
in the new interfaces.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The PANEL block handles embedded panel power and backlight programming.
This programming and sequencing is now owned by DMCUB and driver will
call into the interface for backlight status and programming.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stephen Boyd