[ Upstream commit 4893b8b3ef8db2b182d1a1bebf6c7acf91405000 ]
Up till now the code to start HSR announce timer, which triggers sending
supervisory frames, was assuming that hsr_netdev_notify() would be called
at least twice for hsrX interface. This was required to have different
values for old and current values of network device's operstate.
This is problematic for a case where hsrX interface is already in the
operational state when hsr_netdev_notify() is called, so timer is not
configured to trigger and as a result the hsrX is not sending supervisory
frames to HSR ring.
This error has been discovered when hsr_ping.sh script was run. To be
more specific - for the hsr1 and hsr2 the hsr_netdev_notify() was
called at least twice with different IF_OPER_{LOWERDOWN|DOWN|UP} states
assigned in hsr_check_carrier_and_operstate(hsr). As a result there was
no issue with sending supervisory frames.
However, with hsr3, the notify function was called only once with
operstate set to IF_OPER_UP and timer responsible for triggering
supervisory frames was not fired.
The solution is to use netif_oper_up() and netif_running() helper
functions to assess if network hsrX device is up.
Only then, when the timer is not already pending, it is started.
Otherwise it is deactivated.
Fixes: f421436a59 ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240507111214.3519800-1-lukma@denx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 004d138364fd10dd5ff8ceb54cfdc2d792a7b338 ]
operstate_show() can omit dev_base_lock acquisition only
to read dev->operstate.
Annotate accesses to dev->operstate.
Writers still acquire dev_base_lock for mutual exclusion.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 4893b8b3ef8d ("hsr: Simplify code for announcing HSR nodes timer setup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc349b0771dccebf0fa9f5e1822ac444aef11448 ]
Several clocks as well as both sgmiisys phandles were added by mistake
to the Ethernet bindings for MT7988. Also, the total number of clocks
didn't match with the actual number of items listed.
This happened because the vendor driver which served as a reference uses
a high number of syscon phandles to access various parts of the SoC
which wasn't acceptable upstream. Hence several parts which have never
previously been supported (such SerDes PHY and USXGMII PCS) are going to
be implemented by separate drivers. As a result the device tree will
look much more sane.
Quickly align the bindings with the upcoming reality of the drivers
actually adding support for the remaining Ethernet-related features of
the MT7988 SoC.
Fixes: c94a9aabec ("dt-bindings: net: mediatek,net: add mt7988-eth binding")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/1569290b21cc787a424469ed74456a7e976b102d.1715084326.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 012b7206918dcc5a4dcf1432b3e643114c95957e ]
Only generate one ACK packet for all the subpackets in a jumbo packet. If
we would like to generate more than one ACK, we prioritise them base on
their reason code, in the order, highest first:
OutOfSeq > NoSpace > ExceedsWin > Duplicate > Requested > Delay > Idle
For the first four, we reference the lowest offending subpacket; for the
last three, the highest.
This reduces the number of ACKs we end up transmitting to one per UDP
packet transmitted to reduce network loading and packet parsing.
Fixes: 5d7edbc923 ("rxrpc: Get rid of the Rx ring")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Reviewed-by: Jeffrey Altman <jaltman@auristor.com <mailto:jaltman@auristor.com>>
Link: https://lore.kernel.org/r/20240503150749.1001323-3-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba4e103848d3a2a28a0445e39f4a9564187efe54 ]
Make the following fixes to the congestion control algorithm:
(1) Don't vary the cwnd starting value by the size of RXRPC_TX_SMSS since
that's currently held constant - set to the size of a jumbo subpacket
payload so that we can create jumbo packets on the fly. The current
code invariably picks 3 as the starting value.
Further, the starting cwnd needs to be an even number because we ack
every other packet, so set it to 4.
(2) Don't cut ssthresh when we see an ACK come from the peer with a
receive window (rwind) less than ssthresh. ssthresh keeps track of
characteristics of the connection whereas rwind may be reduced by the
peer for any reason - and may be reduced to 0.
Fixes: 1fc4fa2ac9 ("rxrpc: Fix congestion management")
Fixes: 0851115090 ("rxrpc: Reduce ssthresh to peer's receive window")
Signed-off-by: David Howells <dhowells@redhat.com>
Suggested-by: Simon Wilkinson <sxw@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Reviewed-by: Jeffrey Altman <jaltman@auristor.com <mailto:jaltman@auristor.com>>
Link: https://lore.kernel.org/r/20240503150749.1001323-2-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17469ae0582aaacad36e8e858f58b86c369f21ef ]
From AFS-3.3 a trailer containing extra info was added to the ACK packet
format - but AF_RXRPC has the names of some of the fields mixed up compared
to other AFS implementations.
Rename the struct and the fields to make them match.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Stable-dep-of: ba4e103848d3 ("rxrpc: Fix congestion control algorithm")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a169c267e946b0f47f67e8ccc70134708ccf3d4 ]
When creating the topology for the test, three veth pairs are created in
the initial network namespace before being moved to one of the network
namespaces created by the test.
On systems where systemd-udev uses MACAddressPolicy=persistent (default
since systemd version 242), this will result in some net devices having
the same MAC address since they were created with the same name in the
initial network namespace. In turn, this leads to arping / ndisc6
failing since packets are dropped by the bridge's loopback filter.
Fix by creating each net device in the correct network namespace instead
of moving it there from the initial network namespace.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20240426074015.251854d4@kernel.org/
Fixes: 7648ac72dc ("selftests: net: Add bridge neighbor suppression test")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20240507113033.1732534-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e13d3a9c25b7080f8a619f961e943fe08c2672c ]
As it was done in commit fc1092f51567 ("ipv4: Fix uninit-value access in
__ip_make_skb()") for IPv4, check FLOWI_FLAG_KNOWN_NH on fl6->flowi6_flags
instead of testing HDRINCL on the socket to avoid a race condition which
causes uninit-value access.
Fixes: ea30388bae ("ipv6: Fix an uninit variable access bug in __ip6_make_skb()")
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 86b29d830ad69eecff25b22dc96c14c6573718e6 ]
The change from skb_copy to pskb_copy unfortunately changed the data
copying to omit the ethernet header, since it was pulled before reaching
this point. Fix this by calling __skb_push/pull around pskb_copy.
Fixes: 59c878cbcdd8 ("net: bridge: fix multicast-to-unicast with fraglist GSO")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 19e35f24750ddf860c51e51c68cf07ea181b4881 ]
Commit 7e8cdc9714 ("nfc: Add KCOV annotations") added
kcov_remote_start_common()/kcov_remote_stop() pair into nci_rx_work(),
with an assumption that kcov_remote_stop() is called upon continue of
the for loop. But commit d24b03535e5e ("nfc: nci: Fix uninit-value in
nci_dev_up and nci_ntf_packet") forgot to call kcov_remote_stop() before
break of the for loop.
Reported-by: syzbot <syzbot+0438378d6f157baae1a2@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=0438378d6f157baae1a2
Fixes: d24b03535e5e ("nfc: nci: Fix uninit-value in nci_dev_up and nci_ntf_packet")
Suggested-by: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/6d10f829-5a0c-405a-b39a-d7266f3a1a0b@I-love.SAKURA.ne.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d02abd57e79469a026213f7f5827a98d909f236a ]
Through hidraw, userspace can cause a status report to be sent
from the device. The parsing in ccp_raw_event() may happen in
parallel to a send_usb_cmd() call (which resets the completion
for tracking the report) if it's running on a different CPU where
bottom half interrupts are not disabled.
Add a spinlock around the complete_all() in ccp_raw_event() and
reinit_completion() in send_usb_cmd() to prevent race issues.
Fixes: 40c3a44542 ("hwmon: add Corsair Commander Pro driver")
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Acked-by: Marius Zachmann <mail@mariuszachmann.de>
Link: https://lore.kernel.org/r/20240504092504.24158-4-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a034a7b0715eb51124a5263890b1ed39978ed3a ]
In ccp_raw_event(), the ccp->wait_input_report completion is
completed once. Since we're waiting for exactly one report in
send_usb_cmd(), use complete_all() instead of complete()
to mark the completion as spent.
Fixes: 40c3a44542 ("hwmon: add Corsair Commander Pro driver")
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Acked-by: Marius Zachmann <mail@mariuszachmann.de>
Link: https://lore.kernel.org/r/20240504092504.24158-3-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0cd85dc666cb08e1bd313d560cb4eff4d04219e ]
Introduce cmd_buffer, a separate buffer for storing only
the command that is sent to the device. Before this separation,
the existing buffer was shared for both the command and the
report received in ccp_raw_event(), which was copied into it.
However, because of hidraw, the raw event parsing may be triggered
in the middle of sending a command, resulting in outputting gibberish
to the device. Using a separate buffer resolves this.
Fixes: 40c3a44542 ("hwmon: add Corsair Commander Pro driver")
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Acked-by: Marius Zachmann <mail@mariuszachmann.de>
Link: https://lore.kernel.org/r/20240504092504.24158-2-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1aec77b2bb2ed1db0f5efc61c4c1ca3813307489 ]
Each attribute inside a nested IFLA_VF_VLAN_LIST is assumed to be a
struct ifla_vf_vlan_info so the size of such attribute needs to be at least
of sizeof(struct ifla_vf_vlan_info) which is 14 bytes.
The current size validation in do_setvfinfo is against NLA_HDRLEN (4 bytes)
which is less than sizeof(struct ifla_vf_vlan_info) so this validation
is not enough and a too small attribute might be cast to a
struct ifla_vf_vlan_info, this might result in an out of bands
read access when accessing the saved (casted) entry in ivvl.
Fixes: 79aab093a0 ("net: Update API for VF vlan protocol 802.1ad support")
Signed-off-by: Roded Zats <rzats@paloaltonetworks.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240502155751.75705-1-rzats@paloaltonetworks.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0863634bf9f7cf36291ebb5bfa2d16632f79c49 ]
Currently the driver uses local_bh_disable()/local_bh_enable() in its
IRQ handler to avoid triggering net_rx_action() softirq on exit from
netif_rx(). The net_rx_action() could trigger this driver .start_xmit
callback, which is protected by the same lock as the IRQ handler, so
calling the .start_xmit from netif_rx() from the IRQ handler critical
section protected by the lock could lead to an attempt to claim the
already claimed lock, and a hang.
The local_bh_disable()/local_bh_enable() approach works only in case
the IRQ handler is protected by a spinlock, but does not work if the
IRQ handler is protected by mutex, i.e. this works for KS8851 with
Parallel bus interface, but not for KS8851 with SPI bus interface.
Remove the BH manipulation and instead of calling netif_rx() inside
the IRQ handler code protected by the lock, queue all the received
SKBs in the IRQ handler into a queue first, and once the IRQ handler
exits the critical section protected by the lock, dequeue all the
queued SKBs and push them all into netif_rx(). At this point, it is
safe to trigger the net_rx_action() softirq, since the netif_rx()
call is outside of the lock that protects the IRQ handler.
Fixes: be0384bf599c ("net: ks8851: Handle softirqs at the end of IRQ thread to fix hang")
Tested-by: Ronald Wahl <ronald.wahl@raritan.com> # KS8851 SPI
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240502183436.117117-1-marex@denx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d2706004a1b8b526592e823d7e52551b518a7941 ]
Fix potential null-ptr-deref in hci_le_big_sync_established_evt().
Fixes: f777d88278 (Bluetooth: ISO: Notify user space about failed bis connections)
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 10f9f426ac6e752c8d87bf4346930ba347aaabac ]
Tying the msft->data lifetime to hdev by freeing it in
hci_release_dev() to fix the following case:
[use]
msft_do_close()
msft = hdev->msft_data;
if (!msft) ...(1) <- passed.
return;
mutex_lock(&msft->filter_lock); ...(4) <- used after freed.
[free]
msft_unregister()
msft = hdev->msft_data;
hdev->msft_data = NULL; ...(2)
kfree(msft); ...(3) <- msft is freed.
==================================================================
BUG: KASAN: slab-use-after-free in __mutex_lock_common
kernel/locking/mutex.c:587 [inline]
BUG: KASAN: slab-use-after-free in __mutex_lock+0x8f/0xc30
kernel/locking/mutex.c:752
Read of size 8 at addr ffff888106cbbca8 by task kworker/u5:2/309
Fixes: bf6a4e30ff ("Bluetooth: disable advertisement filters during suspend")
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4238686f9093b98bd6245a348bcf059cdce23af ]
We found below OOB crash:
[ 33.452494] ==================================================================
[ 33.453513] BUG: KASAN: stack-out-of-bounds in refresh_cpu_vm_stats.constprop.0+0xcc/0x2ec
[ 33.454660] Write of size 164 at addr c1d03d30 by task swapper/0/0
[ 33.455515]
[ 33.455767] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 6.1.25-mainline #1
[ 33.456880] Hardware name: Generic DT based system
[ 33.457555] unwind_backtrace from show_stack+0x18/0x1c
[ 33.458326] show_stack from dump_stack_lvl+0x40/0x4c
[ 33.459072] dump_stack_lvl from print_report+0x158/0x4a4
[ 33.459863] print_report from kasan_report+0x9c/0x148
[ 33.460616] kasan_report from kasan_check_range+0x94/0x1a0
[ 33.461424] kasan_check_range from memset+0x20/0x3c
[ 33.462157] memset from refresh_cpu_vm_stats.constprop.0+0xcc/0x2ec
[ 33.463064] refresh_cpu_vm_stats.constprop.0 from tick_nohz_idle_stop_tick+0x180/0x53c
[ 33.464181] tick_nohz_idle_stop_tick from do_idle+0x264/0x354
[ 33.465029] do_idle from cpu_startup_entry+0x20/0x24
[ 33.465769] cpu_startup_entry from rest_init+0xf0/0xf4
[ 33.466528] rest_init from arch_post_acpi_subsys_init+0x0/0x18
[ 33.467397]
[ 33.467644] The buggy address belongs to stack of task swapper/0/0
[ 33.468493] and is located at offset 112 in frame:
[ 33.469172] refresh_cpu_vm_stats.constprop.0+0x0/0x2ec
[ 33.469917]
[ 33.470165] This frame has 2 objects:
[ 33.470696] [32, 76) 'global_zone_diff'
[ 33.470729] [112, 276) 'global_node_diff'
[ 33.471294]
[ 33.472095] The buggy address belongs to the physical page:
[ 33.472862] page:3cd72da8 refcount:1 mapcount:0 mapping:00000000 index:0x0 pfn:0x41d03
[ 33.473944] flags: 0x1000(reserved|zone=0)
[ 33.474565] raw: 00001000 ed741470 ed741470 00000000 00000000 00000000 ffffffff 00000001
[ 33.475656] raw: 00000000
[ 33.476050] page dumped because: kasan: bad access detected
[ 33.476816]
[ 33.477061] Memory state around the buggy address:
[ 33.477732] c1d03c00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 33.478630] c1d03c80: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 00 00 00
[ 33.479526] >c1d03d00: 00 04 f2 f2 f2 f2 00 00 00 00 00 00 f1 f1 f1 f1
[ 33.480415] ^
[ 33.481195] c1d03d80: 00 00 00 00 00 00 00 00 00 00 04 f3 f3 f3 f3 f3
[ 33.482088] c1d03e00: f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00
[ 33.482978] ==================================================================
We find the root cause of this OOB is that arm does not clear stale stack
poison in the case of cpuidle.
This patch refer to arch/arm64/kernel/sleep.S to resolve this issue.
From cited commit [1] that explain the problem
Functions which the compiler has instrumented for KASAN place poison on
the stack shadow upon entry and remove this poison prior to returning.
In the case of cpuidle, CPUs exit the kernel a number of levels deep in
C code. Any instrumented functions on this critical path will leave
portions of the stack shadow poisoned.
If CPUs lose context and return to the kernel via a cold path, we
restore a prior context saved in __cpu_suspend_enter are forgotten, and
we never remove the poison they placed in the stack shadow area by
functions calls between this and the actual exit of the kernel.
Thus, (depending on stackframe layout) subsequent calls to instrumented
functions may hit this stale poison, resulting in (spurious) KASAN
splats to the console.
To avoid this, clear any stale poison from the idle thread for a CPU
prior to bringing a CPU online.
From cited commit [2]
Extend to check for CONFIG_KASAN_STACK
[1] commit 0d97e6d802 ("arm64: kasan: clear stale stack poison")
[2] commit d56a9ef84b ("kasan, arm64: unpoison stack only with CONFIG_KASAN_STACK")
Signed-off-by: Boy Wu <boy.wu@mediatek.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Fixes: 5615f69bc2 ("ARM: 9016/2: Initialize the mapping of KASan shadow memory")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 58fbfecab965014b6e3cc956a76b4a96265a1add ]
The software GRO path for esp transport mode uses skb_mac_header_rebuild
prior to re-injecting the packet via the xfrm_napi_dev. This only
copies skb->mac_len bytes of header which may not be sufficient if the
packet contains 802.1Q tags or other VLAN tags. Worse copying only the
initial header will leave a packet marked as being VLAN tagged but
without the corresponding tag leading to mangling when it is later
untagged.
The VLAN tags are important when receiving the decrypted esp transport
mode packet after GRO processing to ensure it is received on the correct
interface.
Therefore record the full mac header length in xfrm*_transport_input for
later use in corresponding xfrm*_transport_finish to copy the entire mac
header when rebuilding the mac header for GRO. The skb->data pointer is
left pointing skb->mac_header bytes after the start of the mac header as
is expected by the network stack and network and transport header
offsets reset to this location.
Fixes: 7785bba299 ("esp: Add a software GRO codepath")
Signed-off-by: Paul Davey <paul.davey@alliedtelesis.co.nz>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa23317d0268b309bb3f0801ddd0d61813ff5afb ]
simple_recursive_removal() drops the pinning references to all positives
in subtree. For the cases when its argument has been kept alive by
the pinning alone that's exactly the right thing to do, but here
the argument comes from dcache lookup, that needs to be balanced by
explicit dput().
Fixes: e41d237818 "qib_fs: switch to simple_recursive_removal()"
Fucked-up-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01bc4fda9ea0a6b52f12326486f07a4910666cf6 ]
In iocg_pay_debt(), warn is triggered if 'active_list' is empty, which
is intended to confirm iocg is active when it has debt. However, warn
can be triggered during a blkcg or disk removal, if iocg_waitq_timer_fn()
is run at that time:
WARNING: CPU: 0 PID: 2344971 at block/blk-iocost.c:1402 iocg_pay_debt+0x14c/0x190
Call trace:
iocg_pay_debt+0x14c/0x190
iocg_kick_waitq+0x438/0x4c0
iocg_waitq_timer_fn+0xd8/0x130
__run_hrtimer+0x144/0x45c
__hrtimer_run_queues+0x16c/0x244
hrtimer_interrupt+0x2cc/0x7b0
The warn in this situation is meaningless. Since this iocg is being
removed, the state of the 'active_list' is irrelevant, and 'waitq_timer'
is canceled after removing 'active_list' in ioc_pd_free(), which ensures
iocg is freed after iocg_waitq_timer_fn() returns.
Therefore, add the check if iocg was already offlined to avoid warn
when removing a blkcg or disk.
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20240419093257.3004211-1-linan666@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 781d41fed19caf900c8405064676813dc9921d32 ]
Convert a variable sized array from [1] to [].
v2: fix up a few more.
v3: integrate comments from Kees.
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Jeff Johnson <quic_jjohnson@quicinc.com> (v2)
Acked-by: Christian König <christian.koenig@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: keescook@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8c2d38c4d1dee8fe8e015b9ebf65bdd8e4da99b ]
Add Granite Rapids-D to hpm_cpu_ids, so that MSR 0x54 can be used.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20240415212853.2820470-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf52d7f9b2067f02efe7e32697479097aba4a055 ]
I didn't pay close enough attention the last time I tried to fix this
problem - while we currently do correctly take care to make sure we don't
probe a connected eDP port more then once, we don't do the same thing for
eDP ports we found to be disconnected.
So, fix this and make sure we only ever probe eDP ports once and then leave
them at that connector state forever (since without HPD, it's not going to
change on its own anyway). This should get rid of the last few GSP errors
getting spit out during runtime suspend and resume on some machines, as we
tried to reprobe eDP ports in response to ACPI hotplug probe events.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404233736.7946-3-lyude@redhat.com
(cherry picked from commit fe6660b661c3397af0867d5d098f5b26581f1290)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 11baa36d317321f5d54059f07d243c5a1dbbfbb2 ]
Add MODULE_DEVICE_TABLE(), so the module could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f63af7511e7058f3fa4ad5b8102210741c9f947 ]
We don't need to hold the prepare_lock when dropping a ref on a struct
clk_core. The release function is only freeing memory and any code with
a pointer reference has already unlinked anything pointing to the
clk_core. This reduces the holding area of the prepare_lock a bit.
Note that we also don't call free_clk() with the prepare_lock held.
There isn't any reason to do that.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240325184204.745706-3-sboyd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ace0ebe5c98d66889f19e0f30e2518d0c58d0e04 ]
The GPIO library expects the drivers to return -ENOTSUPP in some
cases and not using analogue POSIX code. Make the driver to follow
this.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c3b532ad3fbf82884a2e7e83e37c7dcdd4d1d99 ]
The GPIO library expects the drivers to return -ENOTSUPP in some
cases and not using analogue POSIX code. Make the driver to follow
this.
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 69630926011c1f7170a465b7b5c228deb66e9372 ]
The chacha-p10-crypto module provides optimised chacha routines for
Power10. It also selects CRYPTO_ARCH_HAVE_LIB_CHACHA which says it
provides chacha_crypt_arch() to generic code.
Notably the module needs to provide chacha_crypt_arch() regardless of
whether it is loaded on Power10 or an older CPU.
The implementation of chacha_crypt_arch() already has a fallback to
chacha_crypt_generic(), however the module as a whole fails to load on
pre-Power10, because of the use of module_cpu_feature_match().
This breaks for example loading wireguard:
jostaberry-1:~ # modprobe -v wireguard
insmod /lib/modules/6.8.0-lp155.8.g7e0e887-default/kernel/arch/powerpc/crypto/chacha-p10-crypto.ko.zst
modprobe: ERROR: could not insert 'wireguard': No such device
Fix it by removing module_cpu_feature_match(), and instead check the
CPU feature manually. If the CPU feature is not found, the module
still loads successfully, but doesn't register the Power10 specific
algorithms. That allows chacha_crypt_generic() to remain available for
use, fixing the problem.
[root@fedora ~]# modprobe -v wireguard
insmod /lib/modules/6.8.0-00001-g786a790c4d79/kernel/net/ipv4/udp_tunnel.ko
insmod /lib/modules/6.8.0-00001-g786a790c4d79/kernel/net/ipv6/ip6_udp_tunnel.ko
insmod /lib/modules/6.8.0-00001-g786a790c4d79/kernel/lib/crypto/libchacha.ko
insmod /lib/modules/6.8.0-00001-g786a790c4d79/kernel/arch/powerpc/crypto/chacha-p10-crypto.ko
insmod /lib/modules/6.8.0-00001-g786a790c4d79/kernel/lib/crypto/libchacha20poly1305.ko
insmod /lib/modules/6.8.0-00001-g786a790c4d79/kernel/drivers/net/wireguard/wireguard.ko
[ 18.910452][ T721] wireguard: allowedips self-tests: pass
[ 18.914999][ T721] wireguard: nonce counter self-tests: pass
[ 19.029066][ T721] wireguard: ratelimiter self-tests: pass
[ 19.029257][ T721] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 19.029361][ T721] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
Reported-by: Michal Suchánek <msuchanek@suse.de>
Closes: https://lore.kernel.org/all/20240315122005.GG20665@kitsune.suse.cz/
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240328130200.3041687-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a84602297d36617dbdadeba55a2567031e5165b ]
9p is a remote network protocol, and it doesn't support asynchronous
notifications from the server. Ensure that we don't hand out any leases
since we can't guarantee they'll be broken when a file's contents
change.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e5d208cc9bd5fbc95d536fa223b4b14c37b8ca8 ]
I'm not sure why this check was ever here. After updating to 6.6 I
suddenly found caching had been turned on by default and neither
cache=none nor the new directio would turn it off. After walking through
the new code very manually I realized that it's because the caching has
to be, in effect, turned off explicitly by setting P9L_DIRECT and
whenever a file has a flag, in my case QTAPPEND, it doesn't get set.
Setting aside QTDIR which seems to ignore the new fid->mode entirely,
the rest of these either should be subject to the same cache rules as
every other QTFILE or perhaps very explicitly not cached in the case of
QTAUTH.
Signed-off-by: Joakim Sindholt <opensource@zhasha.com>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 87de39e70503e04ddb58965520b15eb9efa7eef3 ]
This one hits both 9P2000 and .u as it appears v9fs has never translated
the O_TRUNC flag.
Signed-off-by: Joakim Sindholt <opensource@zhasha.com>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd25e15e57e68a6b18dc9323047fe9c68b99290b ]
Garbage in plain 9P2000's perm bits is allowed through, which causes it
to be able to set (among others) the suid bit. This was presumably not
the intent since the unix extended bits are handled explicitly and
conditionally on .u.
Signed-off-by: Joakim Sindholt <opensource@zhasha.com>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7537e31df80cb58c27f3b6fef702534ea87a5957 ]
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240410164109.233308-1-krzk@kernel.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 35f834265e0dc78b003aa0d1af65cafb89666b76 ]
There are various use cases that are becoming more common in which password
changes are scheduled on a server(s) periodically but the clients connected
to this server need to stay connected (even in the face of brief network
reconnects) due to mounts which can not be easily unmounted and mounted at
will, and servers that do password rotation do not always have the ability
to tell the clients exactly when to the new password will be effective,
so add support for an alt password ("password2=") on mount (and also
remount) so that we can anticipate the upcoming change to the server
without risking breaking existing mounts.
An alternative would have been to use the kernel keyring for this but the
processes doing the reconnect do not have access to the keyring but do
have access to the ses structure.
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 30d18df6567be09c1433e81993e35e3da573ac48 ]
In CoCo VMs it is possible for the untrusted host to cause
set_memory_encrypted() or set_memory_decrypted() to fail such that an
error is returned and the resulting memory is shared. Callers need to
take care to handle these errors to avoid returning decrypted (shared)
memory to the page allocator, which could lead to functional or security
issues.
The VMBus ring buffer code could free decrypted/shared pages if
set_memory_decrypted() fails. Check the decrypted field in the struct
vmbus_gpadl for the ring buffers to decide whether to free the memory.
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/r/20240311161558.1310-6-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240311161558.1310-6-mhklinux@outlook.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d788b2fbe6a1a1a9e3db09742b90809d51638b7 ]
In CoCo VMs it is possible for the untrusted host to cause
set_memory_encrypted() or set_memory_decrypted() to fail such that an
error is returned and the resulting memory is shared. Callers need to
take care to handle these errors to avoid returning decrypted (shared)
memory to the page allocator, which could lead to functional or security
issues.
The VMBus device UIO driver could free decrypted/shared pages if
set_memory_decrypted() fails. Check the decrypted field in the gpadl
to decide whether to free the memory.
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/r/20240311161558.1310-5-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240311161558.1310-5-mhklinux@outlook.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bbf9ac34677b57506a13682b31a2a718934c0e31 ]
In CoCo VMs it is possible for the untrusted host to cause
set_memory_encrypted() or set_memory_decrypted() to fail such that an
error is returned and the resulting memory is shared. Callers need to
take care to handle these errors to avoid returning decrypted (shared)
memory to the page allocator, which could lead to functional or security
issues.
The netvsc driver could free decrypted/shared pages if
set_memory_decrypted() fails. Check the decrypted field in the gpadl
to decide whether to free the memory.
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/r/20240311161558.1310-4-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240311161558.1310-4-mhklinux@outlook.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 211f514ebf1ef5de37b1cf6df9d28a56cfd242ca ]
In CoCo VMs it is possible for the untrusted host to cause
set_memory_encrypted() or set_memory_decrypted() to fail such that an
error is returned and the resulting memory is shared. Callers need to
take care to handle these errors to avoid returning decrypted (shared)
memory to the page allocator, which could lead to functional or security
issues.
In order to make sure callers of vmbus_establish_gpadl() and
vmbus_teardown_gpadl() don't return decrypted/shared pages to
allocators, add a field in struct vmbus_gpadl to keep track of the
decryption status of the buffers. This will allow the callers to
know if they should free or leak the pages.
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/r/20240311161558.1310-3-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240311161558.1310-3-mhklinux@outlook.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03f5a999adba062456c8c818a683beb1b498983a ]
In CoCo VMs it is possible for the untrusted host to cause
set_memory_encrypted() or set_memory_decrypted() to fail such that an
error is returned and the resulting memory is shared. Callers need to
take care to handle these errors to avoid returning decrypted (shared)
memory to the page allocator, which could lead to functional or security
issues.
VMBus code could free decrypted pages if set_memory_encrypted()/decrypted()
fails. Leak the pages if this happens.
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/r/20240311161558.1310-2-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240311161558.1310-2-mhklinux@outlook.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lukasz Majewski