As result of commit 915fea04f9 ("s390/smp: enable DAT before
CPU restart callback is called") the low-address protection bit
gets mistakenly unset in control register 0 save area of the
absolute zero memory. That area is used when manual PSW restart
happened to hit an offline CPU. In this case the low-address
protection for that CPU will be dropped.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Fixes: 915fea04f9 ("s390/smp: enable DAT before CPU restart callback is called")
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Crash dump always starts on CPU0. In case CPU0 is offline the
prefix page is not installed and the absolute zero lowcore is
used. However, struct lowcore::mcesad is never assigned and
stays zero. That leads to __machine_kdump() -> save_vx_regs()
call silently stores vector registers to the absolute lowcore
at 0x11b0 offset.
Fixes: a62bc07392 ("s390/kdump: add support for vector extension")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Current snd_soc_dapm_new_control_unlocked() error handling is wrong.
It is using "goto request_failed" (A), but error message is using
"w->name" (B) which is not yet created in such timing.
snd_soc_dapm_new_control_unlocked(xxx)
{
...
switch (w->id) {
case xxx:
...
if (IS_ERR(...)) {
ret = PTR_ERR(...);
(A) goto request_failed;
}
...
}
prefix = soc_dapm_prefix(...);
if (prefix)
(B) w->name = kasprintf(...);
else
(B) w->name = kstrdup_const(...);
...
(A) request_failed:
if (ret != -EPROBE_DEFER)
(B) dev_err(..., w->name, ...);
return ...;
}
we can create "w->name" at beginning of this function.
In such case, we need to call kfree_const(w->name) at error case.
This patch do these.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87wnah8l7e.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current snd_soc_dai_link_event_pre_pmu() is checking "config".
It is using dev_err() (A) if it was NULL, so we don't need to use
WARN_ON() (B) to check it, it is over-kill. This patch removes it.
(B) if (WARN_ON(!config)) {
(A) dev_err(...);
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87zgfd8l7s.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch switches the driver away from legacy gpio/of_gpio API to
gpiod API, and removes use of of_get_named_gpio_flags() which I want to
make private to gpiolib.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/YxeaITtlJexygQo9@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Support devicetree by adding a snd_soc_of_mach array, specifying SOF
topologies for a generic MT8195 machine and for Google Tomato
Chromebooks.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220906092727.37324-6-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the .mailbox_{read,write} generic callbacks for SOF IPC and, while
at it, also change the ipc_msg_data callback to use the SOF API
sof_ipc_msg_data() instead of the custom function mt8195_ipc_msg_data().
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220906092727.37324-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding a probe callback on this snd_soc_card is required when
Sound Open Firmware support is desired, as we need to appropriately
populate the stream_name for SOF to be able to bind widgets.
Failing to do so will produce errors when applying the SOF topology
leading to card registration failure (so, no sound).
While at it, also make sure to fill the topology_shortname as required.
Fixes: 0caf1120c5 ("ASoC: mediatek: mt8195: extract SOF common code")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220906092727.37324-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The recent commit c11117b634 ("ALSA: usb-audio: Refcount multiple
accesses on the single clock") tries to manage the clock rate shared
by several endpoints. This was intended for avoiding the unmatched
rate by a different endpoint, but unfortunately, it introduced a
regression for PulseAudio and pipewire, too; those applications try to
probe the multiple possible rates (44.1k and 48kHz) and setting up the
normal rate fails but only the last rate is applied.
The cause is that the last sample rate is still left to the clock
reference even after closing the endpoint, and this value is still
used at the next open. It happens only when applications set up via
PCM prepare but don't start/stop the stream; the rate is reset when
the stream is stopped, but it's not cleared at close.
This patch addresses the issue above, simply by clearing the rate set
in the clock reference at the last close of each endpoint.
Fixes: c11117b634 ("ALSA: usb-audio: Refcount multiple accesses on the single clock")
Reported-by: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/all/YxXIWv8dYmg1tnXP@zx2c4.com/
Link: https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/2620
Link: https://lore.kernel.org/r/20220907100421.6443-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We started using a 64 bit completion value. Unfortunately, we only
stored the low 32-bits, so a very large completion value would never
be matched in iommu_completion_wait().
Fixes: c69d89aff3 ("iommu/amd: Use 4K page for completion wait write-back semaphore")
Signed-off-by: John Sperbeck <jsperbeck@google.com>
Link: https://lore.kernel.org/r/20220801192229.3358786-1-jsperbeck@google.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The second operand passed to slot_addr() is declared as int or unsigned int
in all call sites. The left-shift to get the offset of a slot can overflow
if swiotlb size is larger than 4G.
Convert the macro to an inline function and declare the second argument as
phys_addr_t to avoid the potential overflow.
Fixes: 26a7e09478 ("swiotlb: refactor swiotlb_tbl_map_single")
Signed-off-by: Chao Gao <chao.gao@intel.com>
Reviewed-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When bucket_find_contains() tries to find the original entry for a
partial sync, it manages to constrain its search in a way that is both
too restrictive and not restrictive enough. A driver which only uses
single mappings rather than scatterlists might not set max_seg_size, but
could still technically perform a partial sync at an offset of more than
64KB into a sufficiently large mapping, so we could stop searching too
early before reaching a legitimate entry. Conversely, if no valid entry
is present and max_range is large enough, we can pointlessly search
buckets that we've already searched, or that represent an impossible
wrapping around the bottom of the address space. At worst, the
(legitimate) case of max_seg_size == UINT_MAX can make the loop
infinite.
Replace the fragile and frankly hard-to-follow "range" logic with a
simple counted loop for the number of possible hash buckets below the
given address.
Reported-by: Yunfei Wang <yf.wang@mediatek.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Send with invalidate verb call can pass in an
uninitialized s/g array with 0 sge's which is
filled into irdma WQE and causes a HW asynchronous
event.
Fix this by using the s/g array in irdma post send
only when its valid.
Fixes: 551c46e ("RDMA/irdma: Add user/kernel shared libraries")
Signed-off-by: Sindhu-Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20220906223244.1119-5-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
When a QP and a MR on a local host are in different PDs, the HW generates
an asynchronous event (AE). The same AE is generated when a QP and a MW
are in different PDs during a bind operation. Return the more appropriate
IBV_WC_MW_BIND_ERR for the latter case by checking the OP type from the
CQE in error.
Fixes: 551c46edc7 ("RDMA/irdma: Add user/kernel shared libraries")
Signed-off-by: Sindhu-Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20220906223244.1119-4-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The MR deregister CQP can fail if an MW is bound to it.
Return an appropriate error for this case.
Fixes: b48c24c2d7 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Sindhu-Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20220906223244.1119-3-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Report the correct max cqes available to an application taking
into account a reserved entry to detect overflow.
Fixes: b48c24c2d7 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Sindhu-Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20220906223244.1119-2-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The variable "has_system_memory" is unused in function
‘adjust_memory_range_protection’, remove it.
Signed-off-by: chen zhang <chenzhang@kylinos.cn>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The driver prevents async event work while handling a processing paused
event, but someone needs to restart it after the controller returns to a
live state.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216400
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Maximum Active Resources (MAR) and Maximum Open Resources (MOR) are 0's
based vales where a value of 0xffffffff indicates that there is no limit.
Decrement the values that are returned by bdev_max_open_zones and
bdev_max_active_zones as the block layer helpers are not 0's based.
A 0 returned by the block layer helpers indicates no limit, thus convert
it to 0xffffffff (U32_MAX).
Fixes: aaf2e048af ("nvmet: add ZBD over ZNS backend support")
Suggested-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The voice allocator sometimes begins allocating from near the end of the
array and then wraps around, however snd_emu10k1_pcm_channel_alloc()
accesses the newly allocated voices as if it never wrapped around.
This results in out of bounds access if the first voice has a high enough
index so that first_voice + requested_voice_count > NUM_G (64).
The more voices are requested, the more likely it is for this to occur.
This was initially discovered using PipeWire, however it can be reproduced
by calling aplay multiple times with 16 channels:
aplay -r 48000 -D plughw:CARD=Live,DEV=3 -c 16 /dev/zero
UBSAN: array-index-out-of-bounds in sound/pci/emu10k1/emupcm.c:127:40
index 65 is out of range for type 'snd_emu10k1_voice [64]'
CPU: 1 PID: 31977 Comm: aplay Tainted: G W IOE 6.0.0-rc2-emu10k1+ #7
Hardware name: ASUSTEK COMPUTER INC P5W DH Deluxe/P5W DH Deluxe, BIOS 3002 07/22/2010
Call Trace:
<TASK>
dump_stack_lvl+0x49/0x63
dump_stack+0x10/0x16
ubsan_epilogue+0x9/0x3f
__ubsan_handle_out_of_bounds.cold+0x44/0x49
snd_emu10k1_playback_hw_params+0x3bc/0x420 [snd_emu10k1]
snd_pcm_hw_params+0x29f/0x600 [snd_pcm]
snd_pcm_common_ioctl+0x188/0x1410 [snd_pcm]
? exit_to_user_mode_prepare+0x35/0x170
? do_syscall_64+0x69/0x90
? syscall_exit_to_user_mode+0x26/0x50
? do_syscall_64+0x69/0x90
? exit_to_user_mode_prepare+0x35/0x170
snd_pcm_ioctl+0x27/0x40 [snd_pcm]
__x64_sys_ioctl+0x95/0xd0
do_syscall_64+0x5c/0x90
? do_syscall_64+0x69/0x90
? do_syscall_64+0x69/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/3707dcab-320a-62ff-63c0-73fc201ef756@tasossah.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix the following use-after-free warning which is observed during
controller reset:
refcount_t: underflow; use-after-free.
WARNING: CPU: 23 PID: 5399 at lib/refcount.c:28 refcount_warn_saturate+0xa6/0xf0
Link: https://lore.kernel.org/r/20220906134908.1039-2-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since the check_user_trigger() is called outside of RCU
read lock, this list_for_each_entry_rcu() caused a suspicious
RCU usage warning.
# echo hist:keys=pid > events/sched/sched_stat_runtime/trigger
# cat events/sched/sched_stat_runtime/trigger
[ 43.167032]
[ 43.167418] =============================
[ 43.167992] WARNING: suspicious RCU usage
[ 43.168567] 5.19.0-rc5-00029-g19ebe4651abf #59 Not tainted
[ 43.169283] -----------------------------
[ 43.169863] kernel/trace/trace_events_trigger.c:145 RCU-list traversed in non-reader section!!
...
However, this file->triggers list is safe when it is accessed
under event_mutex is held.
To fix this warning, adds a lockdep_is_held check to the
list_for_each_entry_rcu().
Link: https://lkml.kernel.org/r/166226474977.223837.1992182913048377113.stgit@devnote2
Cc: stable@vger.kernel.org
Fixes: 7491e2c442 ("tracing: Add a probe that attaches to trace events")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently, The arguments passing to lockdep_hardirqs_{on,off} was fixed
in CALLER_ADDR0.
The function trace_hardirqs_on_caller should have been intended to use
caller_addr to represent the address that caller wants to be traced.
For example, lockdep log in riscv showing the last {enabled,disabled} at
__trace_hardirqs_{on,off} all the time(if called by):
[ 57.853175] hardirqs last enabled at (2519): __trace_hardirqs_on+0xc/0x14
[ 57.853848] hardirqs last disabled at (2520): __trace_hardirqs_off+0xc/0x14
After use trace_hardirqs_xx_caller, we can get more effective information:
[ 53.781428] hardirqs last enabled at (2595): restore_all+0xe/0x66
[ 53.782185] hardirqs last disabled at (2596): ret_from_exception+0xa/0x10
Link: https://lkml.kernel.org/r/20220901104515.135162-2-zouyipeng@huawei.com
Cc: stable@vger.kernel.org
Fixes: c3bc8fd637 ("tracing: Centralize preemptirq tracepoints and unify their usage")
Signed-off-by: Yipeng Zou <zouyipeng@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Commit 2852ca7fba ("panic: Taint kernel if tests are run")
introduced a new taint type, TAINT_TEST, to signal that an
in-kernel test module has been loaded.
TAINT_TEST taint type defaults into a 'bad_taint' list for
kernel tracing and blocks the creation of trace events. This
causes a problem for CXL testing where loading the cxl_test
module makes all CXL modules out-of-tree, blocking any trace
events.
Trace events are in development for CXL at the moment and this
issue was found in test with v6.0-rc1.
Link: https://lkml.kernel.org/r/20220829171048.263065-1-alison.schofield@intel.com
Fixes: 2852ca7fba ("panic: Taint kernel if tests are run")
Reported-by: Ira Weiny <ira.weiny@intel.com>
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The files in scripts/tracing/ belong to the TRACING subsystem.
Add a corresponding file entry for TRACING.
Link: https://lkml.kernel.org/r/20220825115927.20598-1-lukas.bulwahn@gmail.com
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When trying to get a file lock on an AFS file, the server may return
UAEAGAIN to indicate that the lock is already held. This is currently
translated by the default path to -EREMOTEIO.
Translate it instead to -EAGAIN so that we know we can retry it.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey E Altman <jaltman@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/166075761334.3533338.2591992675160918098.stgit@warthog.procyon.org.uk/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Just one fix for now for the AMBA bus code from Isaac Manjarres.
-----BEGIN PGP SIGNATURE-----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=WHUk
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM fix from Russell King:
"Just one fix for now for the AMBA bus code from Isaac Manjarres"
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9229/1: amba: Fix use-after-free in amba_read_periphid()
- Fix return codes in erofs_fscache_{meta_,}read_folio error paths;
- Fix potential wrong pcluster sizes for later non-4K lclusters;
- Fix in-memory pcluster use-after-free on UP platforms.
-----BEGIN PGP SIGNATURE-----
iIcEABYIAC8WIQThPAmQN9sSA0DVxtI5NzHcH7XmBAUCYxdnPREceGlhbmdAa2Vy
bmVsLm9yZwAKCRA5NzHcH7XmBGzxAQCvIteTLkD2HWvvflFcrby6o1vWxoJSDFig
J3QZUgH/TAEAvR6Jyl4oL4/kwtw+2ZuWeXnMI9FXBfz9pyDR/MiCQQw=
=p6+J
-----END PGP SIGNATURE-----
Merge tag 'erofs-for-6.0-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
- Fix return codes in erofs_fscache_{meta_,}read_folio error paths
- Fix potential wrong pcluster sizes for later non-4K lclusters
- Fix in-memory pcluster use-after-free on UP platforms
* tag 'erofs-for-6.0-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: fix pcluster use-after-free on UP platforms
erofs: avoid the potentially wrong m_plen for big pcluster
erofs: fix error return code in erofs_fscache_{meta_,}read_folio
Just move the HAS_FLAT_CCS() check into needs_ccs_pages. This also then
fixes i915_ttm_memcpy_allowed() which was incorrectly reporting true on
DG1, even though it doesn't have small-BAR or flat-CCS.
References: https://gitlab.freedesktop.org/drm/intel/-/issues/6605
Fixes: efeb3caf43 ("drm/i915/ttm: disallow CPU fallback mode for ccs pages")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220905105329.41455-1-matthew.auld@intel.com
(cherry picked from commit 873fef8833)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
A lot of modern laptops use the Parade PS8461E MUX for eDP
switching. The MUX can operate in jitter cleaning mode or
redriver mode, the first one resulting in higher link
quality. The jitter cleaning mode needs to know the link
rate used and the MUX achieves this by snooping the
LINK_BW_SET, LINK_RATE_SELECT and SUPPORTED_LINK_RATES
DPCD accesses.
When the MUX is powered down (seems this can happen whenever
the display is turned off) it loses track of the snooped
link rates so when we do the LINK_RATE_SELECT write it no
longer knowns which link rate we're selecting, and thus it
falls back to the lower quality redriver mode. This results
in unstable high link rates (eg. usually 8.1Gbps link rate
no longer works correctly).
In order to avoid all that let's re-snoop SUPPORTED_LINK_RATES
from the sink at the start of every link training.
Unfortunately we don't have a way to detect the presence of
the MUX. It looks like the set of laptops equipped with this
MUX is fairly large and contains devices from multiple
manufacturers. It may also still be growing with new models.
So a quirk doesn't seem like a very easily maintainable
option, thus we shall attempt to do this unconditionally on
all machines that use LINK_RATE_SELECT. Hopefully this extra
DPCD read doesn't cause issues for any unaffected machine.
If that turns out to be the case we'll need to convert this
into a quirk in the future.
Cc: stable@vger.kernel.org
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6205
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220902070319.15395-1-ville.syrjala@linux.intel.com
Tested-by: Aaron Ma <aaron.ma@canonical.com>
Tested-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 25899c590c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We need to inform PCODE of a desired ring frequencies so PCODE update
the memory frequencies to us. rps->min_freq and rps->max_freq are the
frequencies used in that request. However they were unset when SLPC was
enabled and PCODE never updated the memory freq.
v2 (as Suggested by Ashutosh): if SLPC is in use, let's pick the right
frequencies from the get_ia_constants instead of the fake init of
rps' min and max.
v3: don't forget the max <= min return
v4: Move all the freq conversion to intel_rps.c. And the max <= min
check to where it belongs.
v5: (Ashutosh) Fix old comment s/50 HZ/50 MHz and add a doc explaining
the "raw format"
Fixes: 7ba79a6715 ("drm/i915/guc/slpc: Gate Host RPS when SLPC is enabled")
Cc: <stable@vger.kernel.org> # v5.15+
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Tested-by: Sushma Venkatesh Reddy <sushma.venkatesh.reddy@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220831214538.143950-1-rodrigo.vivi@intel.com
(cherry picked from commit 018a7bdbb0)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Turns out the MIPI sequence block version number and
new block size fields are considered part of the block
header and are not included in the reported new block size
field itself. Bump up the block size appropriately so that
we'll copy over the last five bytes of the block as well.
For this particular machine those last five bytes included
parts of the GPIO op for the backlight on sequence, causing
the backlight no longer to turn back on:
Sequence 6 - MIPI_SEQ_BACKLIGHT_ON
Delay: 20000 us
- GPIO index 0, number 0, set 0 (0x00)
+ GPIO index 1, number 70, set 1 (0x01)
Cc: stable@vger.kernel.org
Fixes: e163cfb4c9 ("drm/i915/bios: Make copies of VBT data blocks")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6652
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220829135834.8585-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit a06289f3f7)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[BEHAVIOR CHANGE]
Since commit f6fca3917b ("btrfs: store chunk size in space-info
struct"), btrfs no longer can create larger data chunks than 1G:
mkfs.btrfs -f -m raid1 -d raid0 $dev1 $dev2 $dev3 $dev4
mount $dev1 $mnt
btrfs balance start --full $mnt
btrfs balance start --full $mnt
umount $mnt
btrfs ins dump-tree -t chunk $dev1 | grep "DATA|RAID0" -C 2
Before that offending commit, what we got is a 4G data chunk:
item 6 key (FIRST_CHUNK_TREE CHUNK_ITEM 9492758528) itemoff 15491 itemsize 176
length 4294967296 owner 2 stripe_len 65536 type DATA|RAID0
io_align 65536 io_width 65536 sector_size 4096
num_stripes 4 sub_stripes 1
Now what we got is only 1G data chunk:
item 6 key (FIRST_CHUNK_TREE CHUNK_ITEM 6271533056) itemoff 15491 itemsize 176
length 1073741824 owner 2 stripe_len 65536 type DATA|RAID0
io_align 65536 io_width 65536 sector_size 4096
num_stripes 4 sub_stripes 1
This will increase the number of data chunks by the number of devices,
not only increase system chunk usage, but also greatly increase mount
time.
Without a proper reason, we should not change the max chunk size.
[CAUSE]
Previously, we set max data chunk size to 10G, while max data stripe
length to 1G.
Commit f6fca3917b ("btrfs: store chunk size in space-info struct")
completely ignored the 10G limit, but use 1G max stripe limit instead,
causing above shrink in max data chunk size.
[FIX]
Fix the max data chunk size to 10G, and in decide_stripe_size_regular()
we limit stripe_size to 1G manually.
This should only affect data chunks, as for metadata chunks we always
set the max stripe size the same as max chunk size (256M or 1G
depending on fs size).
Now the same script result the same old result:
item 6 key (FIRST_CHUNK_TREE CHUNK_ITEM 9492758528) itemoff 15491 itemsize 176
length 4294967296 owner 2 stripe_len 65536 type DATA|RAID0
io_align 65536 io_width 65536 sector_size 4096
num_stripes 4 sub_stripes 1
Reported-by: Wang Yugui <wangyugui@e16-tech.com>
Fixes: f6fca3917b ("btrfs: store chunk size in space-info struct")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Free allocated resources when zalloc() fails for members in c2c_he, to
prevent potential memory leak in c2c_he_zalloc().
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220906032906.21395-4-shangxiaojing@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Switch to the flavored EVP API like in test-libcrypto.c, and remove the
bad gcc #pragma.
Inspired-by: 5b245985a6 ("tools build: Switch to new openssl API for test-libcrypto")
Signed-off-by: Zixuan Tan <tanzixuan.me@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/CABwm_eTnARC1GwMD-JF176k8WXU1Z0+H190mvXn61yr369qt6g@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The cpu mask init code in "record__mmap_cpu_mask_init" function access
"bits" array part of "struct mmap_cpu_mask". The size of this array is
the value from cpu__max_cpu().cpu. This array is used to contain the
cpumask value for each cpu. While setting bit for each cpu, it calls
"set_bit" function which access index in "bits" array.
If we provide a command line option to -C which is greater than the
number of CPU's present in the system, the set_bit could access an array
member which is out-of the array size. This is because currently, there
is no boundary check for the CPU. This will result in seg fault:
<<>>
./perf record -C 12341234 ls
Perf can support 2048 CPUs. Consider raising MAX_NR_CPUS
Segmentation fault (core dumped)
<<>>
Debugging with gdb, points to function flow as below:
<<>>
set_bit
record__mmap_cpu_mask_init
record__init_thread_default_masks
record__init_thread_masks
cmd_record
<<>>
Fix this by adding boundary check for the array.
After the patch:
<<>>
./perf record -C 12341234 ls
Perf can support 2048 CPUs. Consider raising MAX_NR_CPUS
Failed to initialize parallel data streaming masks
<<>>
With this fix, if -C is given a non-exsiting CPU, perf
record will fail with:
<<>>
./perf record -C 50 ls
Failed to initialize parallel data streaming masks
<<>>
Reported-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20220905141929.7171-2-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The affinity code in "affinity_set" function access array named
"sched_cpus". The size for this array is allocated in affinity_setup
function which is nothing but value from get_cpu_set_size. This is used
to contain the cpumask value for each cpu.
While setting bit for each cpu, it calls "set_bit" function which access
index in sched_cpus array. If we provide a command-line option to -C
which is more than the number of CPU's present in the system, the
set_bit could access an array member which is out-of the array size.
This is because currently, there is no boundary check for the CPU. This
will result in seg fault:
<<>>
./perf stat -C 12323431 ls
Perf can support 2048 CPUs. Consider raising MAX_NR_CPUS
Segmentation fault (core dumped)
<<>>
Fix this by adding boundary check for the array.
After the fix from powerpc system:
<<>>
./perf stat -C 12323431 ls 1>out
Perf can support 2048 CPUs. Consider raising MAX_NR_CPUS
Performance counter stats for 'CPU(s) 12323431':
<not supported> msec cpu-clock
<not supported> context-switches
<not supported> cpu-migrations
<not supported> page-faults
<not supported> cycles
<not supported> instructions
<not supported> branches
<not supported> branch-misses
0.001192373 seconds time elapsed
<<>>
Reported-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20220905141929.7171-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
[Why]
Ghost BO is released with non-empty bulk move object. There is a
warning trace:
WARNING: CPU: 19 PID: 1582 at ttm/ttm_bo.c:366 ttm_bo_release+0x2e1/0x2f0 [amdttm]
Call Trace:
amddma_resv_reserve_fences+0x10d/0x1f0 [amdkcl]
amdttm_bo_put+0x28/0x30 [amdttm]
amdttm_bo_move_accel_cleanup+0x126/0x200 [amdttm]
amdgpu_bo_move+0x1a8/0x770 [amdgpu]
ttm_bo_handle_move_mem+0xb0/0x140 [amdttm]
amdttm_bo_validate+0xbf/0x100 [amdttm]
[How]
The resource of ghost BO should be moved to LRU directly, instead of
using bulk move. The bulk move object of ghost BO should set to NULL
before function ttm_bo_move_to_lru_tail_unlocked.
v2: set bulk move to NULL manually if no resource associated with ghost BO
Fixed: 5b951e487fd6bf5f ("drm/ttm: fix bulk move handling v2")
Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220906084619.2545456-1-zhenguo.yin@amd.com
of_device_get_match_data is called on priv->dev before priv->dev is
actually set. Move of_device_get_match_data after priv->dev is correctly
set to fix this kernel panic.
Fixes: 3bb0844e7b ("net: dsa: qca8k: cache match data to speed up access")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220904215319.13070-1-ansuelsmth@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Alexander Gordeev