Geoff Levand says:
====================
net/ps3_gelic_net: DMA related fixes
v9: Make rx_skb_size local to gelic_descr_prepare_rx.
v8: Add more cpu_to_be32 calls.
v7: Remove all cleanups, sync to spider net.
v6: Reworked and cleaned up patches.
v5: Some additional patch cleanups.
v4: More patch cleanups.
v3: Cleaned up patches as requested.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The current Gelic Etherenet driver was checking the return value of its
dma_map_single call, and not using the dma_mapping_error() routine.
Fixes runtime problems like these:
DMA-API: ps3_gelic_driver sb_05: device driver failed to check map error
WARNING: CPU: 0 PID: 0 at kernel/dma/debug.c:1027 .check_unmap+0x888/0x8dc
Fixes: 02c1889166 ("ps3: gigabit ethernet driver for PS3, take3")
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Gelic Ethernet device needs to have the RX sk_buffs aligned to
GELIC_NET_RXBUF_ALIGN, and also the length of the RX sk_buffs must
be a multiple of GELIC_NET_RXBUF_ALIGN.
The current Gelic Ethernet driver was not allocating sk_buffs large
enough to allow for this alignment.
Also, correct the maximum and minimum MTU sizes, and add a new
preprocessor macro for the maximum frame size, GELIC_NET_MAX_FRAME.
Fixes various randomly occurring runtime network errors.
Fixes: 02c1889166 ("ps3: gigabit ethernet driver for PS3, take3")
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
clang with W=1 reports
drivers/net/usb/plusb.c:65:1: error:
unused function 'pl_clear_QuickLink_features' [-Werror,-Wunused-function]
pl_clear_QuickLink_features(struct usbnet *dev, int val)
^
This static function is not used, so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Packet length retrieved from descriptor may be larger than
the actual socket buffer length. In such case the cloned
skb passed up the network stack will leak kernel memory contents.
Additionally prevent integer underflow when size is less than
ETH_FCS_LEN.
Fixes: 55d7de9de6 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In emac_probe, &adpt->work_thread is bound with
emac_work_thread. Then it will be started by timeout
handler emac_tx_timeout or a IRQ handler emac_isr.
If we remove the driver which will call emac_remove
to make cleanup, there may be a unfinished work.
The possible sequence is as follows:
Fix it by finishing the work before cleanup in the emac_remove
and disable timeout response.
CPU0 CPU1
|emac_work_thread
emac_remove |
free_netdev |
kfree(netdev); |
|emac_reinit_locked
|emac_mac_down
|//use netdev
Fixes: b9b17debc6 ("net: emac: emac gigabit ethernet controller driver")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We collect the software statistics counters for RX bytes (reported to
/proc/net/dev and to ethtool -S $dev | grep 'rx_bytes: ") at a time when
skb->len has already been adjusted by the eth_type_trans() ->
skb_pull_inline(skb, ETH_HLEN) call to exclude the L2 header.
This means that when connecting 2 DSA interfaces back to back and
sending 1 packet with length 100, the sending interface will report
tx_bytes as incrementing by 100, and the receiving interface will report
rx_bytes as incrementing by 86.
Since accounting for that in scripts is quirky and is something that
would be DSA-specific behavior (requiring users to know that they are
running on a DSA interface in the first place), the proposal is that we
treat it as a bug and fix it.
This design bug has always existed in DSA, according to my analysis:
commit 91da11f870 ("net: Distributed Switch Architecture protocol
support") also updates skb->dev->stats.rx_bytes += skb->len after the
eth_type_trans() call. Technically, prior to Florian's commit
a86d8becc3 ("net: dsa: Factor bottom tag receive functions"), each and
every vendor-specific tagging protocol driver open-coded the same bug,
until the buggy code was consolidated into something resembling what can
be seen now. So each and every driver should have its own Fixes: tag,
because of their different histories until the convergence point.
I'm not going to do that, for the sake of simplicity, but just blame the
oldest appearance of buggy code.
There are 2 ways to fix the problem. One is the obvious way, and the
other is how I ended up doing it. Obvious would have been to move
dev_sw_netstats_rx_add() one line above eth_type_trans(), and below
skb_push(skb, ETH_HLEN). But DSA processing is not as simple as that.
We count the bytes after removing everything DSA-related from the
packet, to emulate what the packet's length was, on the wire, when the
user port received it.
When eth_type_trans() executes, dsa_untag_bridge_pvid() has not run yet,
so in case the switch driver requests this behavior - commit
412a1526d0 ("net: dsa: untag the bridge pvid from rx skbs") has the
details - the obvious variant of the fix wouldn't have worked, because
the positioning there would have also counted the not-yet-stripped VLAN
header length, something which is absent from the packet as seen on the
wire (there it may be untagged, whereas software will see it as
PVID-tagged).
Fixes: f613ed665b ("net: dsa: Add support for 64-bit statistics")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Fix setting affinity of hwlat threads in containers
Using sched_set_affinity() has unwanted side effects when being
called within a container. Use set_cpus_allowed_ptr() instead.
- Fix per cpu thread management of the hwlat tracer
* Do not start per_cpu threads if one is already running for the CPU.
* When starting per_cpu threads, do not clear the kthread variable
as it may already be set to running per cpu threads
- Fix return value for test_gen_kprobe_cmd()
On error the return value was overwritten by being set to
the result of the call from kprobe_event_delete(), which would
likely succeed, and thus have the function return success.
- Fix splice() reads from the trace file that was broken by
36e2c7421f ("fs: don't allow splice read/write without explicit ops")
- Remove obsolete and confusing comment in ring_buffer.c
The original design of the ring buffer used struct page flags
for tricks to optimize, which was shortly removed due to them
being tricks. But a comment for those tricks remained.
- Set local functions and variables to static
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZBdIkBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qti2AP49s1GM8teFgDF/CO3oa45BoYq1lMJO
1Z+x+mS/bdUAZgEAw+3KGo8oZDuvWu/nr04JPeoy0GL1/JnbQ6JNCCjzhQc=
=Yk66
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix setting affinity of hwlat threads in containers
Using sched_set_affinity() has unwanted side effects when being
called within a container. Use set_cpus_allowed_ptr() instead
- Fix per cpu thread management of the hwlat tracer:
- Do not start per_cpu threads if one is already running for the CPU
- When starting per_cpu threads, do not clear the kthread variable
as it may already be set to running per cpu threads
- Fix return value for test_gen_kprobe_cmd()
On error the return value was overwritten by being set to the result
of the call from kprobe_event_delete(), which would likely succeed,
and thus have the function return success
- Fix splice() reads from the trace file that was broken by commit
36e2c7421f ("fs: don't allow splice read/write without explicit
ops")
- Remove obsolete and confusing comment in ring_buffer.c
The original design of the ring buffer used struct page flags for
tricks to optimize, which was shortly removed due to them being
tricks. But a comment for those tricks remained
- Set local functions and variables to static
* tag 'trace-v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/hwlat: Replace sched_setaffinity with set_cpus_allowed_ptr
ring-buffer: remove obsolete comment for free_buffer_page()
tracing: Make splice_read available again
ftrace: Set direct_ops storage-class-specifier to static
trace/hwlat: Do not start per-cpu thread if it is already running
trace/hwlat: Do not wipe the contents of per-cpu thread data
tracing/osnoise: set several trace_osnoise.c variables storage-class-specifier to static
tracing: Fix wrong return in kprobe_event_gen_test.c
There is a problem with the behavior of hwlat in a container,
resulting in incorrect output. A warning message is generated:
"cpumask changed while in round-robin mode, switching to mode none",
and the tracing_cpumask is ignored. This issue arises because
the kernel thread, hwlatd, is not a part of the container, and
the function sched_setaffinity is unable to locate it using its PID.
Additionally, the task_struct of hwlatd is already known.
Ultimately, the function set_cpus_allowed_ptr achieves
the same outcome as sched_setaffinity, but employs task_struct
instead of PID.
Test case:
# cd /sys/kernel/tracing
# echo 0 > tracing_on
# echo round-robin > hwlat_detector/mode
# echo hwlat > current_tracer
# unshare --fork --pid bash -c 'echo 1 > tracing_on'
# dmesg -c
Actual behavior:
[573502.809060] hwlat_detector: cpumask changed while in round-robin mode, switching to mode none
Link: https://lore.kernel.org/linux-trace-kernel/20230316144535.1004952-1-costa.shul@redhat.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 0330f7aa8e ("tracing: Have hwlat trace migrate across tracing_cpumask CPUs")
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The comment refers to mm/slob.c which is being removed. It comes from
commit ed56829cb3 ("ring_buffer: reset buffer page when freeing") and
according to Steven the borrowed code was a page mapcount and mapping
reset, which was later removed by commit e4c2ce82ca ("ring_buffer:
allocate buffer page pointer"). Thus the comment is not accurate anyway,
remove it.
Link: https://lore.kernel.org/linux-trace-kernel/20230315142446.27040-1-vbabka@suse.cz
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Reported-by: Mike Rapoport <mike.rapoport@gmail.com>
Suggested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Fixes: e4c2ce82ca ("ring_buffer: allocate buffer page pointer")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Since the commit 36e2c7421f ("fs: don't allow splice read/write
without explicit ops") is applied to the kernel, splice() and
sendfile() calls on the trace file (/sys/kernel/debug/tracing
/trace) return EINVAL.
This patch restores these system calls by initializing splice_read
in file_operations of the trace file. This patch only enables such
functionalities for the read case.
Link: https://lore.kernel.org/linux-trace-kernel/20230314013707.28814-1-sfoon.kim@samsung.com
Cc: stable@vger.kernel.org
Fixes: 36e2c7421f ("fs: don't allow splice read/write without explicit ops")
Signed-off-by: Sung-hun Kim <sfoon.kim@samsung.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Here are some small tty and serial driver fixes for 6.3-rc3 to resolve
some reported issues.
They include:
- 8250 driver Kconfig issue pointed out by you that showed up in -rc1
- qcom-geni serial driver fixes
- various 8250 driver fixes for reported problems
- fsl_lpuart driver fixes
- serdev fix for regression in -rc1
- vt.c bugfix
All have been in linux-next for over a week with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZBcinQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynIYACgjP49Xy1N6hDLZJgKxvnPLmvnhY4AoKM8CkHI
zbWudA1fBqsYLFtxNKaQ
=/Ond
-----END PGP SIGNATURE-----
Merge tag 'tty-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for 6.3-rc3 to resolve
some reported issues.
They include:
- 8250 driver Kconfig issue pointed out by you that showed up in -rc1
- qcom-geni serial driver fixes
- various 8250 driver fixes for reported problems
- fsl_lpuart driver fixes
- serdev fix for regression in -rc1
- vt.c bugfix
All have been in linux-next for over a week with no reported problems"
* tag 'tty-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: vt: protect KD_FONT_OP_GET_TALL from unbound access
serial: qcom-geni: drop bogus uart_write_wakeup()
serial: qcom-geni: fix mapping of empty DMA buffer
serial: qcom-geni: fix DMA mapping leak on shutdown
serial: qcom-geni: fix console shutdown hang
serdev: Set fwnode for serdev devices
tty: serial: fsl_lpuart: fix race on RX DMA shutdown
serial: 8250_pci1xxxx: Disable SERIAL_8250_PCI1XXXX config by default
serial: 8250_fsl: fix handle_irq locking
serial: 8250_em: Fix UART port type
serial: 8250: ASPEED_VUART: select REGMAP instead of depending on it
tty: serial: fsl_lpuart: skip waiting for transmission complete when UARTCTRL_SBK is asserted
Revert "tty: serial: fsl_lpuart: adjust SERIAL_FSL_LPUART_CONSOLE config dependency"
Here are a few small char/misc/other driver subsystem patches to resolve
reported problems for 6.3-rc3.
Included in here are:
- Interconnect driver fixes for reported problems
- Memory driver fixes for reported problems.
- nvmem core fix
- firmware driver fix for reported problem.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZBchKw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylYVQCfbQtOMjbfxCNvmBCZbC8GWaanLloAn243V7vJ
oxfPCUa6+BYLFWweKydG
=tuC/
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are a few small char/misc/other driver subsystem patches to
resolve reported problems for 6.3-rc3.
Included in here are:
- Interconnect driver fixes for reported problems
- Memory driver fixes for reported problems
- nvmem core fix
- firmware driver fix for reported problem
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (23 commits)
memory: tegra30-emc: fix interconnect registration race
memory: tegra20-emc: fix interconnect registration race
memory: tegra124-emc: fix interconnect registration race
memory: tegra: fix interconnect registration race
interconnect: exynos: drop redundant link destroy
interconnect: exynos: fix registration race
interconnect: exynos: fix node leak in probe PM QoS error path
interconnect: qcom: msm8974: fix registration race
interconnect: qcom: rpmh: fix registration race
interconnect: qcom: rpmh: fix probe child-node error handling
interconnect: qcom: rpm: fix registration race
nvmem: core: return -ENOENT if nvmem cell is not found
firmware: xilinx: don't make a sleepable memory allocation from an atomic context
interconnect: qcom: rpm: fix probe child-node error handling
interconnect: qcom: osm-l3: fix registration race
interconnect: imx: fix registration race
interconnect: fix provider registration API
interconnect: fix icc_provider_del() error handling
interconnect: fix mem leak when freeing nodes
interconnect: qcom: qcm2290: Fix MASTER_SNOC_BIMC_NRT
...
changes over sysfs have been done instead of waiting until something
else triggers the workqueue later - another error or the polling
interval cycle is reached
-----BEGIN PGP SIGNATURE-----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=Q6Dq
-----END PGP SIGNATURE-----
Merge tag 'ras_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS fix from Borislav Petkov:
- Flush out logged errors immediately after MCA banks configuration
changes over sysfs have been done instead of waiting until something
else triggers the workqueue later - another error or the polling
interval cycle is reached
* tag 'ras_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Make sure logged MCEs are processed after sysfs update
to groups
- Update the proper event time tracking variable depending on the
event type
- Fix a memory overwrite issue due to using the wrong function argument
when outputting perf events
-----BEGIN PGP SIGNATURE-----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=l7PF
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Check whether sibling events have been deactivated before adding them
to groups
- Update the proper event time tracking variable depending on the event
type
- Fix a memory overwrite issue due to using the wrong function argument
when outputting perf events
* tag 'perf_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix check before add_event_to_groups() in perf_group_detach()
perf: fix perf_event_context->time
perf/core: Fix perf_output_begin parameter is incorrectly invoked in perf_event_bpf_output
- Clear temporary storage in the resctrl code to prevent access to an
unexistent MSR
- Add a simple throttling mechanism to protect the hypervisor from potentially
malicious SEV guests issuing requests in rapid succession.
In order to not jeopardize the sanity of everyone involved in
maintaining this code, the request issuing side has received
a cleanup, split in more or less trivial, small and digestible pieces.
Otherwise, the code was threatening to become an unmaintainable mess.
Therefore, that cleanup is marked indirectly also for stable so that
there's no differences between the upstream code and the stable
variant when it comes down to backporting more there.
-----BEGIN PGP SIGNATURE-----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=6UGz
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"There's a little bit more 'movement' in there for my taste but it
needs to happen and should make the code better after it.
- Check cmdline_find_option()'s return value before further
processing
- Clear temporary storage in the resctrl code to prevent access to an
unexistent MSR
- Add a simple throttling mechanism to protect the hypervisor from
potentially malicious SEV guests issuing requests in rapid
succession.
In order to not jeopardize the sanity of everyone involved in
maintaining this code, the request issuing side has received a
cleanup, split in more or less trivial, small and digestible
pieces. Otherwise, the code was threatening to become an
unmaintainable mess.
Therefore, that cleanup is marked indirectly also for stable so
that there's no differences between the upstream code and the
stable variant when it comes down to backporting more there"
* tag 'x86_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Fix use of uninitialized buffer in sme_enable()
x86/resctrl: Clear staged_config[] before and after it is used
virt/coco/sev-guest: Add throttling awareness
virt/coco/sev-guest: Convert the sw_exit_info_2 checking to a switch-case
virt/coco/sev-guest: Do some code style cleanups
virt/coco/sev-guest: Carve out the request issuing logic into a helper
virt/coco/sev-guest: Remove the disable_vmpck label in handle_guest_request()
virt/coco/sev-guest: Simplify extended guest request handling
virt/coco/sev-guest: Check SEV_SNP attribute at probe time
syzkaller.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmQWfYcACgkQ8vlZVpUN
gaNvhAgAqIv3PLgt3SJIC/klXmEsXJn2q1EqAUKk6XHAzppHoUMrnsJJ2Sz+u4NT
eKx7FGz+dIzJK8lLoX+XNnLgdkkJwklD8jIxAjbnkgHaGJbjdLH3Su4elQvGwLla
CprPysjMtgny4rogLwz2D+At3w8o7/JACbzlh0QNhaZ5IIP4Kj5QutgyftF1m4Qa
AfC9KcpJ+poTQTI4m4oOrJCrH6kwJdVItuS5/mk54DTChNNYtJJy2M6eho7IQ9iG
ENBnt06/uWhdHQz4OYmYn3x1iXYOAdAmeVGtREKqOstUd31VO2TCC2lE+7tSnO2d
177m3jfTHdv5znU+LfyrS1Y1u1nGBA==
=AXq7
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fix from Ted Ts'o:
"Fix a double unlock bug on an error path in ext4, found by smatch and
syzkaller"
* tag 'ext4_for_linus_urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix possible double unlock when moving a directory
smatch reports this warning
kernel/trace/ftrace.c:2594:19: warning:
symbol 'direct_ops' was not declared. Should it be static?
The variable direct_ops is only used in ftrace.c, so it should be static
Link: https://lore.kernel.org/linux-trace-kernel/20230311135113.711824-1-trix@redhat.com
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The hwlatd tracer will end up starting multiple per-cpu threads with
the following script:
#!/bin/sh
cd /sys/kernel/debug/tracing
echo 0 > tracing_on
echo hwlat > current_tracer
echo per-cpu > hwlat_detector/mode
echo 100000 > hwlat_detector/width
echo 200000 > hwlat_detector/window
echo 1 > tracing_on
To fix the issue, check if the hwlatd thread for the cpu is already
running, before starting a new one. Along with the previous patch, this
avoids running multiple instances of the same CPU thread on the system.
Link: https://lore.kernel.org/all/20230302113654.2984709-1-tero.kristo@linux.intel.com/
Link: https://lkml.kernel.org/r/20230310100451.3948583-3-tero.kristo@linux.intel.com
Cc: stable@vger.kernel.org
Fixes: f46b16520a ("trace/hwlat: Implement the per-cpu mode")
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
smatch reports several similar warnings
kernel/trace/trace_osnoise.c:220:1: warning:
symbol '__pcpu_scope_per_cpu_osnoise_var' was not declared. Should it be static?
kernel/trace/trace_osnoise.c:243:1: warning:
symbol '__pcpu_scope_per_cpu_timerlat_var' was not declared. Should it be static?
kernel/trace/trace_osnoise.c:335:14: warning:
symbol 'interface_lock' was not declared. Should it be static?
kernel/trace/trace_osnoise.c:2242:5: warning:
symbol 'timerlat_min_period' was not declared. Should it be static?
kernel/trace/trace_osnoise.c:2243:5: warning:
symbol 'timerlat_max_period' was not declared. Should it be static?
These variables are only used in trace_osnoise.c, so it should be static
Link: https://lore.kernel.org/linux-trace-kernel/20230309150414.4036764-1-trix@redhat.com
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Overwriting the error code with the deletion result may cause the
function to return 0 despite encountering an error. Commit b111545d26
("tracing: Remove the useless value assignment in
test_create_synth_event()") solves a similar issue by
returning the original error code, so this patch does the same.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Link: https://lore.kernel.org/linux-trace-kernel/20230131075818.5322-1-aagusev@ispras.ru
Signed-off-by: Anton Gusev <aagusev@ispras.ru>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The cooling levels array is supposed to prevent the system fans from
being configured below a 20% duty cycle as otherwise some of them get
stuck at 0 RPM.
Due to an off-by-one error, the last element in the array was not
initialized, causing it to be set to zero, which in turn lead to fans
being configured with a 0% duty cycle in maximum cooling state.
Since commit 332fdf951d ("mlxsw: thermal: Fix out-of-bounds memory
accesses") the contents of the array are static. Therefore, instead of
fixing the initialization of the array, simply remove it and adjust
thermal_cooling_device_ops::set_cur_state() so that the configured duty
cycle is never set below 20%.
Before:
# cat /sys/class/thermal/thermal_zone0/cdev0/type
mlxsw_fan
# echo 10 > /sys/class/thermal/thermal_zone0/cdev0/cur_state
# cat /sys/class/hwmon/hwmon0/name
mlxsw
# cat /sys/class/hwmon/hwmon0/pwm1
0
After:
# cat /sys/class/thermal/thermal_zone0/cdev0/type
mlxsw_fan
# echo 10 > /sys/class/thermal/thermal_zone0/cdev0/cur_state
# cat /sys/class/hwmon/hwmon0/name
mlxsw
# cat /sys/class/hwmon/hwmon0/pwm1
255
This bug was uncovered when the thermal subsystem repeatedly tried to
configure the cooling devices to their maximum state due to another
issue [1]. This resulted in the fans being stuck at 0 RPM, which
eventually lead to the system undergoing thermal shutdown.
[1] https://lore.kernel.org/netdev/ZA3CFNhU4AbtsP4G@shredder/
Fixes: a421ce088a ("mlxsw: core: Extend cooling device with cooling levels")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew reports that the SFF modules on one of the ZII platforms do not
indicate link up due to the SFP code believing that LOS indicating that
there is no signal being received from the remote end, but in fact the
LOS signal is showing that there is signal.
What makes SFF modules different from SFPs is they typically have an
inverted LOS, which uncovered this issue. When we read the hardware
state, we mask it with state_hw_mask so we ignore anything we're not
interested in. However, we don't re-read when state_hw_mask changes,
leading to sfp->state being stale.
Arrange for a software poll of the module state after we have parsed
the EEPROM in sfp_sm_mod_probe() and updated state_*_mask. This will
generate any necessary events for signal changes for the state
machine as well as updating sfp->state.
Reported-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Fixes: 8475c4b70b ("net: sfp: re-implement soft state polling setup")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently DMA address width is either read from a RO device register
or force set from the platform data. This breaks DMA when the host DMA
address width is <=32it but the device is >32bit.
Right now the driver may decide to use a 2nd DMA descriptor for
another buffer (happens in case of TSO xmit) assuming that 32bit
addressing is used due to platform configuration but the device will
still use both descriptor addresses as one address.
This can be observed with the Intel EHL platform driver that sets
32bit for addr64 but the MAC reports 40bit. The TX queue gets stuck in
case of TCP with iptables NAT configuration on TSO packets.
The logic should be like this: Whatever we do on the host side (memory
allocation GFP flags) should happen with the host DMA width, whenever
we decide how to set addresses on the device registers we must use the
device DMA address width.
This patch renames the platform address width field from addr64 (term
used in device datasheet) to host_addr and uses this value exclusively
for host side operations while all chip operations consider the device
DMA width as read from the device register.
Fixes: 7cfc4486e7 ("stmmac: intel: Configure EHL PSE0 GbE and PSE1 GbE to 32 bits DMA addressing")
Signed-off-by: Jochen Henneberg <jh@henneberg-systemdesign.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli says:
====================
ACPI/DT mdiobus module owner fixes
This patch series fixes wrong mdiobus module ownership for MDIO buses
registered from DT or ACPI.
Thanks Maxime for providing the first patch and making me see that ACPI
also had the same issue.
Changes in v2:
- fixed missing kdoc in the first patch
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Bus ownership is wrong when using acpi_mdiobus_register() to register an
mdio bus. That function is not inline, so when it calls
mdiobus_register() the wrong THIS_MODULE value is captured.
CC: Maxime Bizon <mbizon@freebox.fr>
Fixes: 803ca24d2f ("net: mdio: Add ACPI support code for mdio")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bus ownership is wrong when using of_mdiobus_register() to register an mdio
bus. That function is not inline, so when it calls mdiobus_register() the wrong
THIS_MODULE value is captured.
Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Fixes: 90eff9096c ("net: phy: Allow splitting MDIO bus/device support from PHYs")
[florian: fix kdoc, added Fixes tag]
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the phy_disconnect() -> phy_stop() path, we will be forcibly setting
the PHY state machine to PHY_HALTED. This invalidates the old_state !=
phydev->state condition in phy_state_machine() such that we will neither
display the state change for debugging, nor will we invoke the
link_change_notify() callback.
Factor the code by introducing phy_process_state_change(), and ensure
that we process the state change from phy_stop() as well.
Fixes: 5c5f626bca ("net: phy: improve handling link_change_notify callback")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-03-16 (igb, igbvf, igc)
This series contains updates to igb, igbvf, and igc drivers.
Lin Ma removes rtnl_lock() when disabling SRIOV on remove which was
causing deadlock on igb.
Akihiko Odaki delays enabling of SRIOV on igb to prevent early messages
that could get ignored and clears MAC address when PF returns nack on
reset; indicating no MAC address was assigned for igbvf.
Gaosheng Cui frees IRQs in error path for igbvf.
Akashi Takahiro fixes logic on checking TAPRIO gate support for igc.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In xirc2ps_probe, the local->tx_timeout_task was bounded
with xirc2ps_tx_timeout_task. When timeout occurs,
it will call xirc_tx_timeout->schedule_work to start the
work.
When we call xirc2ps_detach to remove the driver, there
may be a sequence as follows:
Stop responding to timeout tasks and complete scheduled
tasks before cleanup in xirc2ps_detach, which will fix
the problem.
CPU0 CPU1
|xirc2ps_tx_timeout_task
xirc2ps_detach |
free_netdev |
kfree(dev); |
|
| do_reset
| //use dev
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We have to make sure that the info returned by the helper is valid
before using it.
Found by Linux Verification Center (linuxtesting.org) with the SVACE
static analysis tool.
Fixes: f990c82c38 ("qed*: Add support for ndo_set_vf_trust")
Fixes: 733def6a04 ("qed*: IOV link control")
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is a bug for fscrypt_put_master_key_activeref() to see a NULL
keyring. But it used to be possible due to the bug, now fixed, where
fscrypt_destroy_keyring() was called before security_sb_delete(). To be
consistent with how fscrypt_destroy_keyring() uses WARN_ON for the same
issue, WARN and leak the fscrypt_master_key if the keyring is NULL
instead of dereferencing the NULL pointer.
This is a robustness improvement, not a fix.
Link: https://lore.kernel.org/r/20230313221231.272498-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
- Drop omap1 osk driver
- Various potential divide by zero pixclock fixes
- Add pixelclock and fb_check_var() to stifb
- Code style cleanups and indenting fixes
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZBYgxAAKCRD3ErUQojoP
X4uPAP9KRUOxwf8/crLyx6wLWkVkJKPGkBswrHZnupYzVZCIoAEA5CceT9kThBSc
a8kESgGyQQy7i9wKABu5679s3/xMmgY=
=LFFJ
-----END PGP SIGNATURE-----
Merge tag 'fbdev-for-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes from Helge Deller:
"The majority of lines changed is due to a code style cleanup in the
pnmtologo helper program.
Arnd removed the omap1 osk driver and the SIS fb driver is now
orphaned.
Other than that it's the usual bunch of small fixes and cleanups, e.g.
prevent possible divide-by-zero in various fb drivers if the pixclock
is zero and various conversions to devm_platform*() and of_property*()
functions:
- Drop omap1 osk driver
- Various potential divide by zero pixclock fixes
- Add pixelclock and fb_check_var() to stifb
- Code style cleanups and indenting fixes"
* tag 'fbdev-for-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: Use of_property_present() for testing DT property presence
fbdev: au1200fb: Fix potential divide by zero
fbdev: lxfb: Fix potential divide by zero
fbdev: intelfb: Fix potential divide by zero
fbdev: nvidia: Fix potential divide by zero
fbdev: stifb: Provide valid pixelclock and add fb_check_var() checks
fbdev: omapfb: remove omap1 osk driver
fbdev: xilinxfb: Use devm_platform_get_and_ioremap_resource()
fbdev: wm8505fb: Use devm_platform_ioremap_resource()
fbdev: pxa3xx-gcu: Use devm_platform_get_and_ioremap_resource()
fbdev: Use of_property_read_bool() for boolean properties
fbdev: clps711x-fb: Use devm_platform_get_and_ioremap_resource()
fbdev: tgafb: Fix potential divide by zero
MAINTAINERS: orphan SIS FRAMEBUFFER DRIVER
fbdev: omapfb: cleanup inconsistent indentation
drivers: video: logo: add SPDX comment, remove GPL notice in pnmtologo.c
drivers: video: logo: fix code style issues in pnmtologo.c
- Exclude kallsyms_seqs_of_names from kallsyms to fix build error
- Fix 'make kernelrelease' for external module builds
- Get the Debian source package compilable again
- Fix the wrong uname when Debian packages are built with the
KDEB_PKGVERSION option
- Fix superfluous CROSS_COMPILE when building Debian packages
- Fix RPM package build error when KCONFIG_CONFIG is set
- Use 'git archive' for creating source tarballs
- Remove the scripts/list-gitignored tool
-----BEGIN PGP SIGNATURE-----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=kdAo
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Exclude kallsyms_seqs_of_names from kallsyms to fix build error
- Fix 'make kernelrelease' for external module builds
- Get the Debian source package compilable again
- Fix the wrong uname when Debian packages are built with the
KDEB_PKGVERSION option
- Fix superfluous CROSS_COMPILE when building Debian packages
- Fix RPM package build error when KCONFIG_CONFIG is set
- Use 'git archive' for creating source tarballs
- Remove the scripts/list-gitignored tool
* tag 'kbuild-fixes-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: use git-archive for source package creation
kbuild: rpm-pkg: move source components to rpmbuild/SOURCES
kbuild: deb-pkg: use dh_listpackages to know enabled packages
kbuild: deb-pkg: split image and debug objects staging out into functions
kbuild: deb-pkg: set CROSS_COMPILE only when undefined
kbuild: deb-pkg: do not take KERNELRELEASE from the source version
kbuild: deb-pkg: make debian source package working again
Makefile: Make kernelrelease target work with M=
kconfig: Update config changed flag before calling callback
kallsyms: add kallsyms_seqs_of_names to list of special symbols
- ltc2992, adm1266: Set missing can_sleep flag
- tmp512/tmp513: Drop of_match_ptr for ID table to fix build with !CONFIG_OF
- ucd90320: Fix back-to-back access problem
- ina3221: Fix bad error return from probe function
- xgene: Fix use-after-free bug in remove function
- adt7475: Fix hysteresis register bit masks, and fix association
of 'smoothing' attributes
-----BEGIN PGP SIGNATURE-----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=JwY7
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- ltc2992, adm1266: Set missing can_sleep flag
- tmp512/tmp513: Drop of_match_ptr for ID table to fix build with
!CONFIG_OF
- ucd90320: Fix back-to-back access problem
- ina3221: Fix bad error return from probe function
- xgene: Fix use-after-free bug in remove function
- adt7475: Fix hysteresis register bit masks, and fix association of
'smoothing' attributes
* tag 'hwmon-for-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (ltc2992) Set `can_sleep` flag for GPIO chip
hwmon: (adm1266) Set `can_sleep` flag for GPIO chip
hwmon: tmp512: drop of_match_ptr for ID table
hwmon: (ucd90320) Add minimum delay between bus accesses
hwmon: (ina3221) return prober error code
hwmon: (xgene) Fix use after free bug in xgene_hwmon_remove due to race condition
hwmon: (adt7475) Fix masking of hysteresis registers
hwmon: (adt7475) Display smoothing attributes in correct order
* Two fixes from Ondrej for the pata_parport driver to address an issue
with error handling during drive connection and to fix memory leaks
in case of errors during initialization and when disconnecting a
device.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCZBTvPgAKCRDdoc3SxdoY
dgScAP4tCDQonDbpHt6XLqdxeqFKtQefmXe2lI0T7QvTWeW6SAEAqO76nmp1BjN+
5eYkwMwSMR6rd9+vjVhwL88mZQL0nAI=
=iCl0
-----END PGP SIGNATURE-----
Merge tag 'ata-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata fixes from Damien Le Moal:
- Two fixes from Ondrej for the pata_parport driver to address an issue
with error handling during drive connection and to fix memory leaks
in case of errors during initialization and when disconnecting a
device.
* tag 'ata-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: pata_parport: fix memory leaks
ata: pata_parport: fix parport release without claim
The __find_restype() function loops over the m5mols_default_ffmt[]
array, and the termination condition ends up being wrong: instead of
stopping when the iterator becomes the size of the array it traverses,
it stops after it has already overshot the array.
Now, in practice this doesn't likely matter, because the code will
always find the entry it looks for, and will thus return early and never
hit that last extra iteration.
But it turns out that clang will unroll the loop fully, because it has
only two iterations (well, three due to the off-by-one bug), and then
clang will end up just giving up in the middle of the loop unrolling
when it notices that the code walks past the end of the array.
And that made 'objtool' very unhappy indeed, because the generated code
just falls off the edge of the universe, and ends up falling through to
the next function, causing this warning:
drivers/media/i2c/m5mols/m5mols.o: warning: objtool: m5mols_set_fmt() falls through to next function m5mols_get_frame_desc()
Fix the loop ending condition.
Reported-by: Jens Axboe <axboe@kernel.dk>
Analyzed-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Analyzed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/linux-block/CAHk-=wgTSdKYbmB1JYM5vmHMcD9J9UZr0mn7BOYM_LudrP+Xvw@mail.gmail.com/
Fixes: bc125106f8 ("[media] Add support for M-5MOLS 8 Mega Pixel camera ISP")
Cc: HeungJun, Kim <riverful.kim@samsung.com>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-03-16 (iavf)
This series contains updates to iavf driver only.
Alex fixes incorrect check against Rx hash feature and corrects payload
value for IPv6 UDP packet.
Ahmed removes bookkeeping of VLAN 0 filter as it always exists and can
cause a false max filter error message.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
iavf: do not track VLAN 0 filters
iavf: fix non-tunneled IPv6 UDP packet type and hashing
iavf: fix inverted Rx hash condition leading to disabled hash
====================
Link: https://lore.kernel.org/r/20230316155316.1554931-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The CPTS PPS GENf adjustment settings are invalid after it has been
disabled for a while, so reset them.
Fixes: eb9233ce67 ("net: ethernet: ti: am65-cpts: adjust pps following ptp changes")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://lore.kernel.org/r/20230316095232.2002680-1-s-vadapalli@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Packet length retrieved from descriptor may be larger than
the actual socket buffer length. In such case the cloned
skb passed up the network stack will leak kernel memory contents.
Fixes: 2f7ca802bd ("net: Add SMSC LAN9500 USB2.0 10/100 ethernet adapter driver")
Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230316101954.75836-1-szymon.heidrich@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
CPU port should also be enabled in order to get a working switch.
Fixes: a5538a777b ("net: dsa: b53: mmap: Add device tree support")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230316172807.460146-1-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The splice read calls nfsd_splice_actor to put the pages containing file
data into the svc_rqst->rq_pages array. It's possible however to get a
splice result that only has a partial page at the end, if (e.g.) the
filesystem hands back a short read that doesn't cover the whole page.
nfsd_splice_actor will plop the partial page into its rq_pages array and
return. Then later, when nfsd_splice_actor is called again, the
remainder of the page may end up being filled out. At this point,
nfsd_splice_actor will put the page into the array _again_ corrupting
the reply. If this is done enough times, rq_next_page will overrun the
array and corrupt the trailing fields -- the rq_respages and
rq_next_page pointers themselves.
If we've already added the page to the array in the last pass, don't add
it to the array a second time when dealing with a splice continuation.
This was originally handled properly in nfsd_splice_actor, but commit
91e23b1c39 ("NFSD: Clean up nfsd_splice_actor()") removed the check
for it.
Fixes: 91e23b1c39 ("NFSD: Clean up nfsd_splice_actor()")
Cc: Al Viro <viro@zeniv.linux.org.uk>
Reported-by: Dario Lesca <d.lesca@solinos.it>
Tested-by: David Critch <dcritch@redhat.com>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2150630
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Current release - regressions:
- phy: mscc: fix deadlock in phy_ethtool_{get,set}_wol()
- virtio: vsock: don't use skbuff state to account credit
- virtio: vsock: don't drop skbuff on copy failure
- virtio_net: fix page_to_skb() miscalculating the memory size
Current release - new code bugs:
- eth: correct xdp_features after device reconfig
- wifi: nl80211: fix the puncturing bitmap policy
- net/mlx5e: flower:
- fix raw counter initialization
- fix missing error code
- fix cloned flow attribute
- ipa:
- fix some register validity checks
- fix a surprising number of bad offsets
- kill FILT_ROUT_CACHE_CFG IPA register
Previous releases - regressions:
- tcp: fix bind() conflict check for dual-stack wildcard address
- veth: fix use after free in XDP_REDIRECT when skb headroom is small
- ipv4: fix incorrect table ID in IOCTL path
- ipvlan: make skb->skb_iif track skb->dev for l3s mode
- mptcp:
- fix possible deadlock in subflow_error_report
- fix UaFs when destroying unaccepted and listening sockets
- dsa: mv88e6xxx: fix max_mtu of 1492 on 6165, 6191, 6220, 6250, 6290
Previous releases - always broken:
- tcp: tcp_make_synack() can be called from process context,
don't assume preemption is disabled when updating stats
- netfilter: correct length for loading protocol registers
- virtio_net: add checking sq is full inside xdp xmit
- bonding: restore IFF_MASTER/SLAVE flags on bond enslave
Ethertype change
- phy: nxp-c45-tja11xx: fix MII_BASIC_CONFIG_REV bit number
- eth: i40e: fix crash during reboot when adapter is in recovery mode
- eth: ice: avoid deadlock on rtnl lock when auxiliary device
plug/unplug meets bonding
- dsa: mt7530:
- remove now incorrect comment regarding port 5
- set PLL frequency and trgmii only when trgmii is used
- eth: mtk_eth_soc: reset PCS state when changing interface types
Misc:
- ynl: another license adjustment
- move the TCA_EXT_WARN_MSG attribute for tc action
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=5/YI
-----END PGP SIGNATURE-----
Merge tag 'net-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wifi and ipsec.
A little more changes than usual, but it's pretty normal for us that
the rc3/rc4 PRs are oversized as people start testing in earnest.
Possibly an extra boost from people deploying the 6.1 LTS but that's
more of an unscientific hunch.
Current release - regressions:
- phy: mscc: fix deadlock in phy_ethtool_{get,set}_wol()
- virtio: vsock: don't use skbuff state to account credit
- virtio: vsock: don't drop skbuff on copy failure
- virtio_net: fix page_to_skb() miscalculating the memory size
Current release - new code bugs:
- eth: correct xdp_features after device reconfig
- wifi: nl80211: fix the puncturing bitmap policy
- net/mlx5e: flower:
- fix raw counter initialization
- fix missing error code
- fix cloned flow attribute
- ipa:
- fix some register validity checks
- fix a surprising number of bad offsets
- kill FILT_ROUT_CACHE_CFG IPA register
Previous releases - regressions:
- tcp: fix bind() conflict check for dual-stack wildcard address
- veth: fix use after free in XDP_REDIRECT when skb headroom is small
- ipv4: fix incorrect table ID in IOCTL path
- ipvlan: make skb->skb_iif track skb->dev for l3s mode
- mptcp:
- fix possible deadlock in subflow_error_report
- fix UaFs when destroying unaccepted and listening sockets
- dsa: mv88e6xxx: fix max_mtu of 1492 on 6165, 6191, 6220, 6250, 6290
Previous releases - always broken:
- tcp: tcp_make_synack() can be called from process context, don't
assume preemption is disabled when updating stats
- netfilter: correct length for loading protocol registers
- virtio_net: add checking sq is full inside xdp xmit
- bonding: restore IFF_MASTER/SLAVE flags on bond enslave Ethertype
change
- phy: nxp-c45-tja11xx: fix MII_BASIC_CONFIG_REV bit number
- eth: i40e: fix crash during reboot when adapter is in recovery mode
- eth: ice: avoid deadlock on rtnl lock when auxiliary device
plug/unplug meets bonding
- dsa: mt7530:
- remove now incorrect comment regarding port 5
- set PLL frequency and trgmii only when trgmii is used
- eth: mtk_eth_soc: reset PCS state when changing interface types
Misc:
- ynl: another license adjustment
- move the TCA_EXT_WARN_MSG attribute for tc action"
* tag 'net-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (108 commits)
selftests: bonding: add tests for ether type changes
bonding: restore bond's IFF_SLAVE flag if a non-eth dev enslave fails
bonding: restore IFF_MASTER/SLAVE flags on bond enslave ether type change
net: renesas: rswitch: Fix GWTSDIE register handling
net: renesas: rswitch: Fix the output value of quote from rswitch_rx()
ethernet: sun: add check for the mdesc_grab()
net: ipa: fix some register validity checks
net: ipa: kill FILT_ROUT_CACHE_CFG IPA register
net: ipa: add two missing declarations
net: ipa: reg: include <linux/bug.h>
net: xdp: don't call notifiers during driver init
net/sched: act_api: add specific EXT_WARN_MSG for tc action
Revert "net/sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy"
net: dsa: microchip: fix RGMII delay configuration on KSZ8765/KSZ8794/KSZ8795
ynl: make the tooling check the license
ynl: broaden the license even more
tools: ynl: make definitions optional again
hsr: ratelimit only when errors are printed
qed/qed_mng_tlv: correctly zero out ->min instead of ->hour
selftests: net: devlink_port_split.py: skip test if no suitable device available
...
-----BEGIN PGP SIGNATURE-----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=qTVU
-----END PGP SIGNATURE-----
Merge tag 'block-6.3-2023-03-16' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"A bit bigger than usual, as the NVMe pull request missed last weeks
submission. In detail:
- NVMe pull request via Christoph:
- Avoid potential UAF in nvmet_req_complete (Damien Le Moal)
- More quirks (Elmer Miroslav Mosher Golovin, Philipp Geulen)
- Fix a memory leak in the nvme-pci probe teardown path
(Irvin Cote)
- Repair the MAINTAINERS entry (Lukas Bulwahn)
- Fix handling single range discard request (Ming Lei)
- Show more opcode names in trace events (Minwoo Im)
- Fix nvme-tcp timeout reporting (Sagi Grimberg)
- MD pull request via Song:
- Two fixes for old issues (Neil)
- Resource leak in device stopping (Xiao)
- Bio based device stats fix (Yu)
- Kill unused CONFIG_BLOCK_COMPAT (Lukas)
- sunvdc missing mdesc_grab() failure check (Liang)
- Fix for reversal of request ordering upon issue for certain cases
(Jan)
- null_blk timeout fixes (Damien)
- Loop use-after-free fix (Bart)
- blk-mq SRCU fix for BLK_MQ_F_BLOCKING devices (Chris)"
* tag 'block-6.3-2023-03-16' of git://git.kernel.dk/linux:
block: remove obsolete config BLOCK_COMPAT
md: select BLOCK_LEGACY_AUTOLOAD
block: count 'ios' and 'sectors' when io is done for bio-based device
block: sunvdc: add check for mdesc_grab() returning NULL
nvmet: avoid potential UAF in nvmet_req_complete()
nvme-trace: show more opcode names
nvme-tcp: add nvme-tcp pdu size build protection
nvme-tcp: fix opcode reporting in the timeout handler
nvme-pci: add NVME_QUIRK_BOGUS_NID for Lexar NM620
nvme-pci: add NVME_QUIRK_BOGUS_NID for Netac NV3000
nvme-pci: fixing memory leak in probe teardown path
nvme: fix handling single range discard request
MAINTAINERS: repair malformed T: entries in NVM EXPRESS DRIVERS
block: null_blk: cleanup null_queue_rq()
block: null_blk: Fix handling of fake timeout request
blk-mq: fix "bad unlock balance detected" on q->srcu in __blk_mq_run_dispatch_ops
loop: Fix use-after-free issues
block: do not reverse request order when flushing plug list
md: avoid signed overflow in slot_store()
md: Free resources in __md_stop
-----BEGIN PGP SIGNATURE-----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=da06
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.3-2023-03-16' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- When PF_NO_SETAFFINITY was removed for io-wq threads, we kind of
forgot about the SQPOLL thread. Remove it there as well, there's even
less of a reason to set it there (Michal)
- Fixup a confusing 'ret' setting (Li)
- When MSG_RING is used to send a direct descriptor to another ring,
it's possible to have it allocate it on the target ring rather than
provide a specific index for it. If this is done, return the chosen
value in the CQE, like we would've done locally (Pavel)
- Fix a regression in this series on huge page bvec collapsing (Pavel)
* tag 'io_uring-6.3-2023-03-16' of git://git.kernel.dk/linux:
io_uring/rsrc: fix folio accounting
io_uring/msg_ring: let target know allocated index
io_uring: rsrc: Optimize return value variable 'ret'
io_uring/sqpoll: Do not set PF_NO_SETAFFINITY on sqpoll threads
- Fix the psci_pd_init_topology() failure path in the PSCI cpuidle
driver (Shawn Guo).
- Modify the sleepgraph utility so it does not crash on binary data
in device names (Todd Brandt).
-----BEGIN PGP SIGNATURE-----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=nILD
-----END PGP SIGNATURE-----
Merge tag 'pm-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix an error code path issue in a cpuidle driver and make the
sleepgraph utility more robust against unexpected input.
Specifics:
- Fix the psci_pd_init_topology() failure path in the PSCI cpuidle
driver (Shawn Guo)
- Modify the sleepgraph utility so it does not crash on binary data
in device names (Todd Brandt)"
* tag 'pm-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
pm-graph: sleepgraph: Avoid crashing on binary data in device names
cpuidle: psci: Iterate backwards over list in psci_pd_remove()
David S. Miller