Fixes LP: #796030 by removing forced pipe A on HP 2730p. Quirk has
previously been introduced to fix a sleep mode problem that does not
exist any more.
v2: Added Tested-by and Bugzilla Link
Bugzilla: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/796030
Tested-by: Ronny Standtke <ronny.standtke@gmx.net>
Signed-off-by: Philipp Grete <mail@pgrete.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Manually resolve the conflict between the new enum drm property
helpers in drm-next and the new "force-dvi" option that the "audio" output
property gained in drm-intel-next.
While resolving this conflict, switch the new drm_prop_enum_list to
use the newly introduced enum defines instead of magic values.
Conflicts:
drivers/gpu/drm/i915/intel_modes.c
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
For the simple KMS driver case we need some more info about what the preferred
depth and if a shadow framebuffer is preferred.
I've only added this for intel/radeon which support the dumb ioctls so far.
If you need something really fancy you should be writing a real X.org driver.
v2: drop cursor information, just return an error from the cursor ioctls
and we can make userspace fallback to sw cursor in that case, cursor
info was getting too messy, best to start smaller.
Signed-off-by: Dave Airlie <airlied@redhat.com>
The current enabling of bus mastering in the drm midlayer allows a large
race condition under kexec. When a kexec'ed kernel re-enables bus mastering
for the GPU, previously setup dma blocks may cause writes to random pieces
of memory. On radeon the writeback mechanism can cause these sorts of issues.
This patch doesn't fix the problem, but it moves the bus master enable under
the individual drivers control so they can move enabling it until later in
their load cycle and close the race.
Fix for radeon kms driver will be in a follow-up patch.
Signed-off-by: Dave Airlie <airlied@redhat.com>
This reverts commit e167976ee7,
Since this was already fixed in commit
3bd3c93299 some days before this
commit cause seq_file.h to be included twice.
Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We store stuff in texdw[7] so this array needs to have 8 elements.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
With the introduction of the PCH, we gained an LVDS presence pin but we
continued to use the existing logic that asserted that LVDS was only
supported on certain mobile chipsets. However, there are desktop
IronLake systems with LVDS attached which we fail to detect. So for PCH,
trust the LVDS presence pin and quirk all the lying manufacturers.
Tested-by: Daniel Woff <wolff.daniel@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=43171
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
So that we can tally the request against the command sequence in the
ringbuffer, or merely jump to the interesting locations.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Being able to tally the list of outstanding requests with the sequence
of commands in the ringbuffer is often useful evidence with respect to
driver corruption.
Note that since this is the umpteenth per-ring data structure to be added
to the error state, I've coallesced the nearby loops (the ringbuffer and
batchbuffer) into a single structure along with the list of requests. A
later task would be to refactor the ring register state into the same
structure.
v2: Fix pretty printing of requests so that they are parsed correctly by
intel_error_decode and use the 0x%08x format for seqno for consistency
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
By recording the location of every request in the ringbuffer, we know
that in order to retire the request the GPU must have finished reading
it and so the GPU head is now beyond the tail of the request. We can
therefore provide a conservative estimate of where the GPU is reading
from in order to avoid having to read back the ring buffer registers
when polling for space upon starting a new write into the ringbuffer.
A secondary effect is that this allows us to convert
intel_ring_buffer_wait() to use i915_wait_request() and so consolidate
upon the single function to handle the complicated task of waiting upon
the GPU. A necessary precaution is that we need to make that wait
uninterruptible to match the existing conditions as all the callers of
intel_ring_begin() have not been audited to handle ERESTARTSYS
correctly.
By using a conservative estimate for the head, and always processing all
outstanding requests first, we prevent a race condition between using
the estimate and direct reads of I915_RING_HEAD which could result in
the value of the head going backwards, and the tail overflowing once
again. We are also careful to mark any request that we skip over in
order to free space in ring as consumed which provides a
self-consistency check.
Given sufficient abuse, such as a set of unthrottled GPU bound
cairo-traces, avoiding the use of I915_RING_HEAD gives a 10-20% boost on
Sandy Bridge (i5-2520m):
firefox-paintball 18927ms -> 15646ms: 1.21x speedup
firefox-fishtank 12563ms -> 11278ms: 1.11x speedup
which is a mild consolation for the performance those traces achieved from
exploiting the buggy autoreported head.
v2: Add a few more comments and make request->tail a conservative
estimate as suggested by Daniel Vetter.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: resolve conflicts with retirement defering and the lack of
the autoreport head removal (that will go in through -fixes).]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This was pointed by Jesse Barnes. The code now seems to follow the
specification but I don't have an SDVO device to really test this.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* tag 'drm-intel-next-2012-02-07' of git://people.freedesktop.org/~danvet/drm-intel: (29 commits)
drm/i915: Handle unmappable buffers during error state capture
drm/i915: rewrite shmem_pread_slow to use copy_to_user
drm/i915: rewrite shmem_pwrite_slow to use copy_from_user
drm/i915: fall through pwrite_gtt_slow to the shmem slow path
drm/i915: add debugfs file for swizzling information
drm/i915: fix swizzle detection for gen3
drm/i915: Remove the upper limit on the bo size for mapping into the CPU domain
drm/i915: add per-ring fault reg to error_state
drm/i915: reject GTT domain in relocations
drm/i915: remove the i915_batchbuffer_info debugfs file
drm/i915: capture error_state also for stuck rings
drm/i915: refactor debugfs create functions
drm/i915: refactor debugfs open function
drm/i915: don't trash the gtt when running out of fences
drm/i915: Separate fence pin counting from normal bind pin counting
drm/i915/ringbuffer: kill snb blt workaround
drm/i915: collect more per ring error state
drm/i915: refactor ring error state capture to use arrays
drm/i915: switch ring->id to be a real id
drm/i915: set AUD_CONFIG N_value_index for DisplayPort
...
GMBUS has several ports and each has it's own corresponding
I2C adpater. When multiple I2C adapters call gmbus_xfer() at
the same time there is a race condition in using the underlying
GMBUS controller. Fixing this by adding a mutex lock when calling
gmbus_xfer().
v2: Moved gmbus_mutex below intel_gmbus and added comments.
Rebased to drm-intel-next-queued.
Signed-off-by: Yufeng Shen <miletus@chromium.org>
[danvet: Shortened the gmbus_mutex comment a bit and add the patch
revision comment to the commit message.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When HDMI-DVI converter is used, it's not only necessary to turn off
audio, but also to disable HDMI_MODE_SELECT and video infoframe. Since
the DVI mode is mainly tied to audio functionality from end user POV,
add a new "force-dvi" audio mode:
xrandr --output HDMI1 --set audio force-dvi
Note that most users won't need to set this and happily rely on the EDID
based DVI auto detection.
Reported-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This patch replaces the locking from the downclock routines with an assert
to ensure the registers are indeed unlocked. Without this patch, pre-SNB
devices would lock the registers when downclocking which would cause a
WARNING on suspend/resume with downclocking enabled.
Note: To hit this bug, you need to have lvds downclocking enabled.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
evergreen and northern island gpu needs more informations for 2D tiling
than previous r6xx/r7xx. Add field to tiling ioctl to allow userspace
to provide those.
The v8 cs checking change to track color view on r6xx/r7xx doesn't
affect old userspace as old userspace always emited 0 for this register.
v2 fix r6xx/r7xx 2D tiling computation
v3 fix r6xx/r7xx height align for untiled surface & add support for
tile split on evergreen and newer
v4 improve tiling debugging output
v5 fix tile split code for evergreen and newer
v6 set proper tile split for crtc register
v7 fix tile split limit value
v8 add COLOR_VIEW checking to r6xx/r7xx checker, add evergreen cs
checking, update safe reg for r600, evergreen and cayman.
Evergreen checking need some work around for stencil alignment
issues
v9 fix tile split value range, fix compressed texture handling and
mipmap calculation, allow evergreen check to be silencious in
front of current broken userspace (depth/stencil alignment issue)
v10 fix eg 3d texture and compressed texture, fix r600 depth array,
fix r600 color view computation, add support for evergreen stencil
split
v11 more verbose debugging in some case
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
v2: agd5f: add strmout CS checking, copy_dw register checking
v3: agd5f: don't use cs_check_reg() for copy_dw checking as it
will incorrectly patch the command stream for certain regs.
v4: agd5f: add warning if safe reg check fails for copy_dw
v5: agd5f: add stricter checking for 6xx/7xx
v6: agd5f: add range checking for copy_dw on eg+,
add sx_surface_sync to safe reg list for 7xx.
v7: agd5f: add stricter checking for eg+
Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The first parameter should be "number of elements" and the second parameter
should be "element size".
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Bump driver minor to signal availability of the page-flip ioctl.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
And assign the initial width and height to the minimum in that case.
Strange values (-1) from these registers have been reported by users.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Pending events may have stale pointer references to struct drm_file objects
after a file has been closed, but before the event is supposed to be
attached to the drm file. Remove such events on file close.
Tested with "modetest".
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
CEA actually specifies an interlaced mode with even vtotal and
supplies a diagram showing how this is supposed to work.
Note that interlaced modes with an even vtotal seem to be a fairly
recent invention. All modelines lore I could dig up with googling says
that vtotal for interlaced modes _needs_ to be odd. But the even
modelines in CEA are not a spec-bug, there's a figure in CEA-861-E
called "Figure 5 Special Interlaced Video Format Timing (Even Vtotal)"
that explains how it's supposed to work. Furthermore intel Bspec
explicitly mentions that both odd and even interlaced vtotal are
supported (VTOTAL register in the south display engine of PCH split
chips).
Acked-by: Adam Jackson <ajax@redhat.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The locking in our setup and teardown paths is rather arbitrary, but
generally we try to protect gem stuff with dev->struct_mutex. Further,
the ums/gem ioctl to setup gem _does_ take the look. So fix up this
benign inconsistency.
Notice while reading through code.
v2: Rebased on top of the ppgtt code.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We still have reports of missed irqs even on Sandybridge with the
HWSTAM workaround in place. Testing by the bug reporter gets rid of
them with the forcewake voodoo and no HWSTAM writes.
Because I've slightly botched the rebasing I've left out the ACTHD
readback which is also required to get IVB working. Seems to still
work on the tester's machine, so I think we should go with the more
minmal approach on SNB. Especially since I've only found weak evidence
for holding forcewake while waiting for an interrupt to arrive, but
none for the ACTHD readback.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45181
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45332
Tested-by: Nicolas Kalkhof nkalkhof()at()web.de
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Currently we reserve seqnos only when we emit the request to the ring
(by bumping dev_priv->next_seqno), but start using it much earlier for
ring->oustanding_lazy_request. When 2 threads compete for the gpu and
run on two different rings (e.g. ddx on blitter vs. compositor)
hilarity ensued, especially when we get constantly interrupted while
reserving buffers.
Breakage seems to have been introduced in
commit 6f392d5486
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Sat Aug 7 11:01:22 2010 +0100
drm/i915: Use a common seqno for all rings.
This patch fixes up the seqno reservation logic by moving it into
i915_gem_next_request_seqno. The ring->add_request functions now
superflously still return the new seqno through a pointer, that will
be refactored in the next patch.
Note that with this change we now unconditionally allocate a seqno,
even when ->add_request might fail because the rings are full and the
gpu died. But this does not open up a new can of worms because we can
already leave behind an outstanding_request_seqno if e.g. the caller
gets interrupted with a signal while stalling for the gpu in the
eviciton paths. And with the bugfix we only ever have one seqno
allocated per ring (and only that ring), so there are no ordering
issues with multiple outstanding seqnos on the same ring.
v2: Keep i915_gem_get_seqno (but move it to i915_gem.c) to make it
clear that we only have one seqno counter for all rings. Suggested by
Chris Wilson.
v3: As suggested by Chris Wilson use i915_gem_next_request_seqno
instead of ring->oustanding_lazy_request to make the follow-up
refactoring more clearly correct. Also improve the commit message
with issues discussed on irc.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45181
Tested-by: Nicolas Kalkhof nkalkhof()at()web.de
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If we don't have a sufficient number of free entries in the FIFO, we
proceed to do a write anyway. With this check we should have a clue if
that write actually failed or not.
After some discussion with Daniel Vetter regarding his original
complaint, we agreed upon this.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This is similar to a patch I wrote several months ago. It's been updated
for the new FORCEWAKE_MT. As recommended by Chris Wilson, use WARN()
instead of DRM_ERROR, so we can get a backtrace.
This shouldn't impact performance too much as the extra register read
can replace the POSTING_READ we had previously.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add register definitions for GTFIFODBG, and clear it during init time to
make sure state is correct.
This register tells us if either a read, or a write occurred while the
fifo was full. It seems like bit 2 is an OR of bit 0 and bit 1, so we
check that as well, but the documents are not quite clear.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by (v1): Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
I'm not sure why they are needed (I didn't notice any difference in my
tests), but these bits are in our documentation and they are also set by
the Windows driver.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The drm core _really_ likes to frob around with the crtc timings and
put halfed vertical timings (in fields) in there. Which confuses the
overlay code, resulting in it's refusal to display anything at the
lower half of an interlaced pipe.
Tested-by: Christopher Egert <cme3000@gmail.com>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Ross <pross@xvid.org>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Christopher Egert <cme3000@gmail.com>
Tested-by: Alfonso Fiore <alfonso.fiore@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Ross <pross@xvid.org>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Christopher Egert <cme3000@gmail.com>
Tested-by: Alfonso Fiore <alfonso.fiore@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The hw seems to use this to correctly insert the required delay
before/after an even/odd interlaced field. This might also explain
why we need to substract 1 half-line from vtotal - if the hw just
adds the delay programmend in VSYNCSHIFT the total frame time would be
about that too long.
These registers seems to only exist on gen4 and later. For paranoia
also program it to 0 for progressive modes, but according to
documentation the hw should just ignore it in this case.
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Alfonso Fiore <alfonso.fiore@gmail.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
gen2 doesn't support it, so be a bit more paranoid and add a check to
ensure that we never ever set an unsupported interlaced bit.
Ensure that userspace can't set an interlaced mode by resetting
interlace_allowed for the crt on gen2. dvo and lvds are the only other
encoders that gen2 supports and these already disallow interlaced
modes.
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
According to Paulo Zanoni, this is what windows does.
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Alfonso Fiore <alfonso.fiore@gmail.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
According to bspec, we need to subtract an additional line from vtotal
for interlaced modes and vblank_end needs to equal vtotal. All other
timing fields do not need this special treatment, so kill it.
Bspec says that this is irrespective of whether the interlaced mode
has an odd or even vtotal, both modes are supported.
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Christopher Egert <cme3000@gmail.com>
Tested-by: Alfonso Fiore <alfonso.fiore@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We have a pretty decent confusion about vertical timings of interlaced
modes. Peter Ross has written a patch that makes interlace modes work
on a lot more platforms/output combinations by doubling the vertical
timings.
The issue with that patch is that core drm _does_ support specifying
whether we want these vertical timings in fields or frames, we just
haven't managed to consistently use this facility. The relavant
function is drm_mode_set_crtcinfo, which fills in the crtc timing
information.
The first thing to note is that the drm core keeps interlaced modes in
frames, but displays modelines in fields. So when the crtc modeset
helper copies over the mode into adjusted_mode it will already contain
vertical timings in half-frames. The result is that the fixup code in
intel_crtc_mode_fixup doesn't actually do anything (in most cases at
least).
Now gen3+ natively supports interlaced modes and wants the vertical
timings in frames. Which is what sdvo already fixes up, at least under
some conditions.
There are a few other place that demand vertical timings in fields
but never actually deal with interlaced modes, so use frame timings
for consistency, too. These are:
- lvds panel,
- dvo encoders - dvo is the only way gen2 could support interlaced
mode, but currently we don't support any encoders that do.
- tv out - despite that the tv dac sends out an interlaced signal it
expects a progressive mode pipe configuration.
All these encoders enforce progressive modes by resetting
interlace_allowed.
Hence we always want crtc vertical timings in frames. Enforce this in
our crtc mode_fixup function and rip out any redudant timing
computations from the encoders' mode_fixup function.
v2-4: Adjust the vertical timings a bit.
v5: Split out the 'subtract-one for interlaced' fixes.
v6: Clarify issues around tv-out and gen2.
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Christopher Egert <cme3000@gmail.com>
Tested-by: Alfonso Fiore <alfonso.fiore@gmail.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
- Clarify which bits are for which chips.
- Note that gen2 can't do interlaced directly (only via dvo tv chips).
- Move the mask to the top to make it clearer how wide this field is.
- Add defintions for all possible values.
This patch doesn't change any code.
v2: Paulo Zanoni pointed out that the pixel doubling modes do no
longer exist on ivb.
Cc: Peter Ross <pross@xvid.org>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Christopher Egert <cme3000@gmail.com>
Tested-by: Alfonso Fiore <alfonso.fiore@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Back-merge from drm-fixes into drm-intel-next to sort out two things:
- interlaced support: -fixes contains a bugfix to correctly clear
interlaced configuration bits in case the bios sets up an interlaced
mode and we want to set up the progressive mode (current kernels
don't support interlaced). The actual feature work to support
interlaced depends upon (and conflicts with) this bugfix.
- forcewake voodoo to workaround missed IRQ issues: -fixes only enabled
this for ivybridge, but some recent bug reports indicate that we
need this on Sandybridge, too. But in a slightly different flavour
and with other fixes and reworks on top. Additionally there are some
forcewake cleanup patches heading to -next that would conflict with
currrent -fixes.
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux:
drm/i915: fixup interlaced bits clearing in PIPECONF on PCH_SPLIT (v2)
drm/i915: no lvds quirk for AOpen MP45
drm/i915: Force explicit bpp selection for intel_dp_link_required
drm/i915: fixup interlaced bits clearing in PIPECONF on PCH_SPLIT
drm/i915:: Disable FBC on SandyBridge
We want to unconditionally enable ppgtt for two reasons:
- Windows uses this on snb and later.
- We need the basic hw support to work before we can think about real
per-process address spaces and other cool features we want.
But Chris Wilson was complaining all over irc and intel-gfx that this
will blow up if we don't have a module option to disable it. Hence add
one, to prevent this.
ppgtt support seems to slightly change the timings and make crashy
things slightly more or less crashy. Now in my testing and the testing
this got on troublesome snb machines, it seems to have improved things
only. But on ivb it makes quite a few crashes happen much more often,
see
https://bugs.freedesktop.org/show_bug.cgi?id=41353
Luckily Eugeni Dodonov seems to have a set of workarounds that fix
this issue.
v2: Don't try to enable ppgtt on pre-snb.
v3: Pimp commit message and make Chris Wilson less grumpy by adding a
module option.
v4: New try at making Chris Wilson happy.
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This was pretty usefull for debugging, might be useful for diagnosing
issues.
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Split out for easier cross-checking of the boring pieces with bspec.
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Philipp Grete