discard request usually is very big and easily use all bandwidth budget
of a cgroup. discard request size doesn't really mean the size of data
written, so it doesn't make sense to account it into bandwidth budget.
Jens pointed out treating the size 0 doesn't make sense too, because
discard request does have cost. But it's not easy to find the actual
cost. This patch simply makes the size one sector.
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
CEC support was added for Exynos5 in 4.13, but for the Odroids we need to set
'needs-hpd' as well since CEC is disabled when there is no HDMI hotplug signal,
just as for the exynos4 Odroid-U3.
This is due to the level-shifter that is disabled when there is no HPD, thus
blocking the CEC signal as well. Same close-but-no-cigar board design as the
Odroid-U3.
Tested with my Odroid XU4.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Fix very early boot failures with KASLR enabled
- Fix fatal signal handling on userspace access from kernel
- Fix leakage of floating point register state across exec()
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCgAGBQJZnUeIAAoJELescNyEwWM0hH8IALpwELGRIKFkHYCSnBBjyHUl
SfoWSJJ8Q9X8filHk5DakfM8wTcsbwlk6XpCwqx+hbETGDq8Zz8eKlzJvg0ARpND
/Z6H3nhp3Z1MIV0nkn10XLgbKNwl7/512lTaO+TfqiIXG7fLZh5+zWBlHMcvDuNb
RAy8AVNnYOfiqB4tRupZ8MoRerVi8PHPUpPY/FB1NeGoD0nNIl/lopKRwaD+XXiS
KDfnZd4jAs8y71iaOSidybyNFQ7T++MvZsGx4eLB86MY4IBihxBWQojvtNp7Pptp
H50IFvSYKG4LXTYphZUbWriW600PGHO4oVjeY1KaZsgAhtIsegqi1SH75ulXe70=
=ES28
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Late arm64 fixes.
They fix very early boot failures with KASLR where the early mapping
of the kernel is incorrect, so the failure mode looks like a hang with
no output. There's also a signal-handling fix when a uaccess routine
faults with a fatal signal pending, which could be used to create
unkillable user tasks using userfaultfd and finally a state leak fix
for the floating pointer registers across a call to exec().
We're still seeing some random issues crop up (inode memory corruption
and spinlock recursion) but we've not managed to reproduce things
reliably enough to debug or bisect them yet.
Summary:
- Fix very early boot failures with KASLR enabled
- Fix fatal signal handling on userspace access from kernel
- Fix leakage of floating point register state across exec()"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: kaslr: Adjust the offset to avoid Image across alignment boundary
arm64: kaslr: ignore modulo offset when validating virtual displacement
arm64: mm: abort uaccess retries upon fatal signal
arm64: fpsimd: Prevent registers leaking across exec
- An important core fix to reject invalid GPIOs *before* trying
to obtain a GPIO descriptor for it.
- A driver fix for the mvebu driver IRQ handling.
-----BEGIN PGP SIGNATURE-----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=eV+r
-----END PGP SIGNATURE-----
Merge tag 'gpio-v4.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Here are the (hopefully) last GPIO fixes for v4.13:
- an important core fix to reject invalid GPIOs *before* trying to
obtain a GPIO descriptor for it.
- a driver fix for the mvebu driver IRQ handling"
* tag 'gpio-v4.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: mvebu: Fix cause computation in irq handler
gpio: reject invalid gpio before getting gpio_desc
Add checking for the path component length and verify it is <= the maximum
that the server advertizes via FileFsAttributeInformation.
With this patch cifs.ko will now return ENAMETOOLONG instead of ENOENT
when users to access an overlong path.
To test this, try to cd into a (non-existing) directory on a CIFS share
that has a too long name:
cd /mnt/aaaaaaaaaaaaaaa...
and it now should show a good error message from the shell:
bash: cd: /mnt/aaaaaaaaaaaaaaaa...aaaaaa: File name too long
rh bz 1153996
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Cc: <stable@vger.kernel.org>
Six minor and error leg fixes, plus one major change: the reversion of
scsi-mq as the default. We're doing the latter temporarily (with a
backport to stable) to give us time to fix all the issues that turned
up with this default before trying again.
Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=aB/i
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Six minor and error leg fixes, plus one major change: the reversion of
scsi-mq as the default.
We're doing the latter temporarily (with a backport to stable) to give
us time to fix all the issues that turned up with this default before
trying again"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: cxgb4i: call neigh_event_send() to update MAC address
Revert "scsi: default to scsi-mq"
scsi: sd_zbc: Write unlock zone from sd_uninit_cmnd()
scsi: aacraid: Fix out of bounds in aac_get_name_resp
scsi: csiostor: fail probe if fw does not support FCoE
scsi: megaraid_sas: fix error handle in megasas_probe_one
The df for a SMB2 share triggers a GetInfo call for
FS_FULL_SIZE_INFORMATION. The values returned are used to populate
struct statfs.
The problem is that none of the information returned by the call
contains the total blocks available on the filesystem. Instead we use
the blocks available to the user ie. quota limitation when filling out
statfs.f_blocks. The information returned does contain Actual free units
on the filesystem and is used to populate statfs.f_bfree. For users with
quota enabled, it can lead to situations where the total free space
reported is more than the total blocks on the system ending up with df
reports like the following
# df -h /mnt/a
Filesystem Size Used Avail Use% Mounted on
//192.168.22.10/a 2.5G -2.3G 2.5G - /mnt/a
To fix this problem, we instead populate both statfs.f_bfree with the
same value as statfs.f_bavail ie. CallerAvailableAllocationUnits. This
is similar to what is done already in the code for cifs and df now
reports the quota information for the user used to mount the share.
# df --si /mnt/a
Filesystem Size Used Avail Use% Mounted on
//192.168.22.10/a 2.7G 101M 2.6G 4% /mnt/a
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Pierguido Lambri <plambri@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Cc: <stable@vger.kernel.org>
My previous patch fixed a link error for all at91 platforms when
CONFIG_ARM_CPU_SUSPEND was not set, however this caused another
problem on a configuration that enabled CONFIG_ARCH_AT91 but none
of the individual SoCs, and that also enabled CPU_ARM720 as
the only CPU:
warning: (ARCH_AT91 && SOC_IMX23 && SOC_IMX28 && ARCH_PXA && MACH_MVEBU_V7 && SOC_IMX6 && ARCH_OMAP3 && ARCH_OMAP4 && SOC_OMAP5 && SOC_AM33XX && SOC_DRA7XX && ARCH_EXYNOS3 && ARCH_EXYNOS4 && EXYNOS5420_MCPM && EXYNOS_CPU_SUSPEND && ARCH_VEXPRESS_TC2_PM && ARM_BIG_LITTLE_CPUIDLE && ARM_HIGHBANK_CPUIDLE && QCOM_PM) selects ARM_CPU_SUSPEND which has unmet direct dependencies (ARCH_SUSPEND_POSSIBLE)
arch/arm/kernel/sleep.o: In function `cpu_resume':
(.text+0xf0): undefined reference to `cpu_arm720_suspend_size'
arch/arm/kernel/suspend.o: In function `__cpu_suspend_save':
suspend.c:(.text+0x134): undefined reference to `cpu_arm720_do_suspend'
This improves the hack some more by only selecting ARM_CPU_SUSPEND
for the part that requires it, and changing pm.c to drop the
contents of unused init functions so we no longer refer to
cpu_resume on at91 platforms that don't need it.
Fixes: cc7a938f5f ("ARM: at91: select CONFIG_ARM_CPU_SUSPEND")
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Lenovo G50-70 (17aa:3978) with Conexant codec chip requires the
similar workaround for the inverted stereo dmic like other Lenovo
models.
Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1020657
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
once error happens in shadow_indirect_ctx function, the variable
wa_ctx->indirect_ctx.obj is not initialized but accessed, so the
kernel null point panic occurs.
Fixes: 894cf7d156 ("drm/i915/gvt: i915_gem_object_create() returns an error pointer")
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: fred gao <fred.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Commit c4ea41ba19 ("binder: use group leader instead of open thread")'
was incomplete and didn't update a check in binder_mmap(), causing all
mmap() calls into the binder driver to fail.
Signed-off-by: Martijn Coenen <maco@android.com>
Tested-by: John Stultz <john.stultz@linaro.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
acpi_graph_get_child_prop_value() is intended to find a child node with a
certain property value pair. The check
if (!fwnode_property_read_u32(fwnode, prop_name, &nr))
continue;
is faulty: fwnode_property_read_u32() returns zero on success, not on
failure, leading to comparing values only if the searched property was not
found.
Moreover, the check is made against the parent device node instead of
the child one as it should be.
Fixes: 79389a83bc (ACPI / property: Add support for remote endpoints)
Reported-by: Hyungwoo Yang <hyungwoo.yang@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: 4.12+ <stable@vger.kernel.org> # 4.12+
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 2d2a954375 (ACPICA: Update two error messages to emit
control method name) causes acpi_evaluate_object_typed() to fail
if its pathname argument is NULL, but some callers of that function
in the kernel, particularly acpi_nondev_subnode_data_ok(), pass
NULL as pathname to it and expect it to work.
For this reason, make acpi_evaluate_object_typed() check if its
pathname argument is NULL and fall back to using the pathname of
its handle argument if that is the case.
Reported-by: Sakari Ailus <sakari.ailus@intel.com>
Tested-by: Yang, Hyungwoo <hyungwoo.yang@intel.com>
Fixes: 2d2a954375 (ACPICA: Update two error messages to emit control method name)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Initializing cq_context with ev_queue in create_cq(), leads to NULL pointer
dereference in ib_uverbs_comp_handler(), if application doesnot use completion
channel. This patch fixes the cq_context initialization.
Fixes: 1e7710f3f6 ("IB/core: Change completion channel to use the reworked")
Cc: stable@vger.kernel.org # 4.12
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
(cherry picked from commit 699a2d5b1b)
With 16KB pages and a kernel Image larger than 16MB, the current
kaslr_early_init() logic for avoiding mappings across swapper table
boundaries fails since increasing the offset by kimg_sz just moves the
problem to the next boundary.
This patch rounds the offset down to (1 << SWAPPER_TABLE_SHIFT) if the
Image crosses a PMD_SIZE boundary.
Fixes: afd0e5a876 ("arm64: kaslr: Fix up the kernel image alignment")
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
In the KASLR setup routine, we ensure that the early virtual mapping
of the kernel image does not cover more than a single table entry at
the level above the swapper block level, so that the assembler routines
involved in setting up this mapping can remain simple.
In this calculation we add the proposed KASLR offset to the values of
the _text and _end markers, and reject it if they would end up falling
in different swapper table sized windows.
However, when taking the addresses of _text and _end, the modulo offset
(the physical displacement modulo 2 MB) is already accounted for, and
so adding it again results in incorrect results. So disregard the modulo
offset from the calculation.
Fixes: 08cdac619c ("arm64: relocatable: deal with physically misaligned ...")
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
When there's a fatal signal pending, arm64's do_page_fault()
implementation returns 0. The intent is that we'll return to the
faulting userspace instruction, delivering the signal on the way.
However, if we take a fatal signal during fixing up a uaccess, this
results in a return to the faulting kernel instruction, which will be
instantly retried, resulting in the same fault being taken forever. As
the task never reaches userspace, the signal is not delivered, and the
task is left unkillable. While the task is stuck in this state, it can
inhibit the forward progress of the system.
To avoid this, we must ensure that when a fatal signal is pending, we
apply any necessary fixup for a faulting kernel instruction. Thus we
will return to an error path, and it is up to that code to make forward
progress towards delivering the fatal signal.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Steve Capper <steve.capper@arm.com>
Tested-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Tested-by: James Morse <james.morse@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
There are some tricky dependencies between the different stages of
flushing the FPSIMD register state during exec, and these can race
with context switch in ways that can cause the old task's regs to
leak across. In particular, a context switch during the memset() can
cause some of the task's old FPSIMD registers to reappear.
Disabling preemption for this small window would be no big deal for
performance: preemption is already disabled for similar scenarios
like updating the FPSIMD registers in sigreturn.
So, instead of rearranging things in ways that might swap existing
subtle bugs for new ones, this patch just disables preemption
around the FPSIMD state flushing so that races of this type can't
occur here. This brings fpsimd_flush_thread() into line with other
code paths.
Cc: stable@vger.kernel.org
Fixes: 674c242c93 ("arm64: flush FP/SIMD state correctly after execve()")
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
When user tries to replace the user-defined control TLV, the kernel
checks the change of its content via memcmp(). The problem is that
the kernel passes the return value from memcmp() as is. memcmp()
gives a non-zero negative value depending on the comparison result,
and this shall be recognized as an error code.
The patch covers that corner-case, return 1 properly for the changed
TLV.
Fixes: 8aa9b586e4 ("[ALSA] Control API - more robust TLV implementation")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is the same bug as we fixed in commit f6cd7daecf ("drm: Release
driver references to handle before making it available again"), but now
the exposure is via the PRIME lookup tables. If we remove the
object/handle from the PRIME lut, then a new request for the same
object/fd will generate a new handle, thus for a short window that
object is known to userspace by two different handles. Fix this by
releasing the driver tracking before PRIME.
Fixes: 0ff926c7d4 ("drm/prime: add exported buffers to current fprivs
imported buffer list (v2)")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Thierry Reding <treding@nvidia.com>
Cc: stable@vger.kernel.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170819120558.6465-1-chris@chris-wilson.co.uk
These headsets reports a lot of: cannot set freq 44100 to ep 0x81
and need a small delay between sample rate settings, just like
Zoom R16/24. Add both headsets to the Zoom R16/24 quirk for
a 1 ms delay between control msgs.
Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch was applied to the MFD twice, causing unwanted behavour.
This reverts commit b77eb79acc.
Fixes: b77eb79acc ("mfd: da9061: Fix to remove BBAT_CONT register from chip model")
Reported-by: Steve Twiss <stwiss.opensource@diasemi.com>
Reviewed-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Core Changes:
- Fix framebuffer leak in setplane error condition (Nikil)
- Prevent BUG in atomic_ioctl by properly resetting state on EDEADLK (Maarten)
- Add missing return in atomic_check_only if atomic_check fails (Maarten)
Driver Changes:
- rockchip: Don't try to suspend if device not initialized (Jeffy)
Cc: Jeffy Chen <jeffy.chen@rock-chips.com>
Cc: Nikhil Mahale <nmahale@nvidia.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
* tag 'drm-misc-fixes-2017-08-18' of git://anongit.freedesktop.org/git/drm-misc:
drm/atomic: If the atomic check fails, return its value first
drm/atomic: Handle -EDEADLK with out-fences correctly
drm: Fix framebuffer leak
drm/rockchip: Fix suspend crash when drm is not bound
- Enable color space conversion on the primary plane when the framebuffer
format is a YUV format.
- The IPUv3 base driver now uses drm_format_info in the PRE/PRG code. The
PRE/PRG parts are already disabled if DRM is not available. Enforce that
if DRM is built as a module, IPUv3 must be built as a module, too.
-----BEGIN PGP SIGNATURE-----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=nO8q
-----END PGP SIGNATURE-----
Merge tag 'imx-drm-fixes-2017-08-18' of git://git.pengutronix.de/git/pza/linux into drm-fixes
drm/imx: fix YUV primary plane and IPUv3 build corner case
- Enable color space conversion on the primary plane when the framebuffer
format is a YUV format.
- The IPUv3 base driver now uses drm_format_info in the PRE/PRG code. The
PRE/PRG parts are already disabled if DRM is not available. Enforce that
if DRM is built as a module, IPUv3 must be built as a module, too.
* tag 'imx-drm-fixes-2017-08-18' of git://git.pengutronix.de/git/pza/linux:
drm/imx: ipuv3-plane: fix YUV framebuffer scanout on the base plane
gpu: ipu-v3: add DRM dependency
A single commit to restore the framebuffer console when there's no DRM
users left.
-----BEGIN PGP SIGNATURE-----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=bwwk
-----END PGP SIGNATURE-----
Merge tag 'sunxi-drm-fixes-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-fixes
Allwinner DRM fixes for 4.13
A single commit to restore the framebuffer console when there's no DRM
users left.
* tag 'sunxi-drm-fixes-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
drm/sun4i: Implement drm_driver lastclose to restore fbdev console
Pull sparc fixes from David Miller:
"Just a couple small fixes, two of which have to do with gcc-7:
1) Don't clobber kernel fixed registers in __multi4 libgcc helper.
2) Fix a new uninitialized variable warning on sparc32 with gcc-7,
from Thomas Petazzoni.
3) Adjust pmd_t initializer on sparc32 to make gcc happy.
4) If ATU isn't available, don't bark in the logs. From Tushar Dave"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc: kernel/pcic: silence gcc 7.x warning in pcibios_fixup_bus()
sparc64: remove unnecessary log message
sparc64: Don't clibber fixed registers in __multi4.
mm: add pmd_t initializer __pmd() to work around a GCC bug.
When building the kernel for Sparc using gcc 7.x, the build fails
with:
arch/sparc/kernel/pcic.c: In function ‘pcibios_fixup_bus’:
arch/sparc/kernel/pcic.c:647:8: error: ‘cmd’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
cmd |= PCI_COMMAND_IO;
^~
The simplified code looks like this:
unsigned int cmd;
[...]
pcic_read_config(dev->bus, dev->devfn, PCI_COMMAND, 2, &cmd);
[...]
cmd |= PCI_COMMAND_IO;
I.e, the code assumes that pcic_read_config() will always initialize
cmd. But it's not the case. Looking at pcic_read_config(), if
bus->number is != 0 or if the size is not one of 1, 2 or 4, *val will
not be initialized.
As a simple fix, we initialize cmd to zero at the beginning of
pcibios_fixup_bus.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- PAE40 related updates
- SLC errata for region ops
- intc line masking by default
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=mOLm
-----END PGP SIGNATURE-----
Merge tag 'arc-4.13-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
- PAE40 related updates
- SLC errata for region ops
- intc line masking by default
* tag 'arc-4.13-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
arc: Mask individual IRQ lines during core INTC init
ARCv2: PAE40: set MSB even if !CONFIG_ARC_HAS_PAE40 but PAE exists in SoC
ARCv2: PAE40: Explicitly set MSB counterpart of SLC region ops addresses
ARC: dma: implement dma_unmap_page and sg variant
ARCv2: SLC: Make sure busy bit is set properly for region ops
ARC: [plat-sim] Include this platform unconditionally
ARC: [plat-axs10x]: prepare dts files for enabling PAE40 on axs103
ARC: defconfig: Cleanup from old Kconfig options
Pull networking fixes from David Miller:
1) Fix IGMP handling wrt VRF, from David Ahern.
2) Fix timer access to freed object in dccp, from Eric Dumazet.
3) Use kmalloc_array() in ptr_ring to avoid overflow cases which are
triggerable by userspace. Also from Eric Dumazet.
4) Fix infinite loop in unmapping cleanup of nfp driver, from Colin Ian
King.
5) Correct datagram peek handling of empty SKBs, from Matthew Dawson.
6) Fix use after free in TIPC, from Eric Dumazet.
7) When replacing a route in ipv6 we need to reset the round robin
pointer, from Wei Wang.
8) Fix bug in pci_find_pcie_root_port() which was unearthed by the
relaxed ordering changes, from Thierry Redding. I made sure to get
an explicit ACK from Bjorn this time around :-)
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits)
ipv6: repair fib6 tree in failure case
net_sched: fix order of queue length updates in qdisc_replace()
tools lib bpf: improve warning
switchdev: documentation: minor typo fixes
bpf, doc: also add s390x as arch to sysctl description
net: sched: fix NULL pointer dereference when action calls some targets
rxrpc: Fix oops when discarding a preallocated service call
irda: do not leak initialized list.dev to userspace
net/mlx4_core: Enable 4K UAR if SRIOV module parameter is not enabled
PCI: Allow PCI express root ports to find themselves
tcp: when rearming RTO, if RTO time is in past then fire RTO ASAP
net: check and errout if res->fi is NULL when RTM_F_FIB_MATCH is set
ipv6: reset fn->rr_ptr when replacing route
sctp: fully initialize the IPv6 address in sctp_v6_to_addr()
tipc: fix use-after-free
tun: handle register_netdevice() failures properly
datagram: When peeking datagrams with offset < 0 don't skip empty skbs
bpf, doc: improve sysctl knob description
netxen: fix incorrect loop counter decrement
nfp: fix infinite loop on umapping cleanup
...
This was reported many times, and this was even mentioned in commit
52ee2dfdd4 ("pids: refactor vnr/nr_ns helpers to make them safe") but
somehow nobody bothered to fix the obvious problem: task_tgid_nr_ns() is
not safe because task->group_leader points to nowhere after the exiting
task passes exit_notify(), rcu_read_lock() can not help.
We really need to change __unhash_process() to nullify group_leader,
parent, and real_parent, but this needs some cleanups. Until then we
can turn task_tgid_nr_ns() into another user of __task_pid_nr_ns() and
fix the problem.
Reported-by: Troy Kensinger <tkensinger@google.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With '-mtune=atom', which is enabled with CONFIG_MATOM=y, GCC uses some
unusual instructions for setting up the stack.
Instead of:
mov %rsp, %rbp
it does:
lea (%rsp), %rbp
And instead of:
add imm, %rsp
it does:
lea disp(%rsp), %rsp
Add support for these instructions to the objtool decoder.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: baa41469a7 ("objtool: Implement stack validation 2.0")
Link: http://lkml.kernel.org/r/4ea1db896e821226efe1f8e09f270771bde47e65.1501188854.git.jpoimboe@redhat.com
[ This is a cherry-picked version of upcoming commit 5b8de48e82. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
sthyi should only generate a specification exception if the function
code is zero and the response buffer is not on a 4k boundary.
The current code would also test for unknown function codes if the
response buffer, that is currently only defined for function code 0,
is not on a 4k boundary and incorrectly inject a specification
exception instead of returning with condition code 3 and return code 4
(unsupported function code).
Fix this by moving the boundary check.
Fixes: 95ca2cb579 ("KVM: s390: Add sthyi emulation")
Cc: <stable@vger.kernel.org> # 4.8+
Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The sthyi inline assembly misses register r3 within the clobber
list. The sthyi instruction will always write a return code to
register "R2+1", which in this case would be r3. Due to that we may
have register corruption and see host crashes or data corruption
depending on how gcc decided to allocate and use registers during
compile time.
Fixes: 95ca2cb579 ("KVM: s390: Add sthyi emulation")
Cc: <stable@vger.kernel.org> # 4.8+
Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
We to some extent should tolerate R1_OUT_OF_RANGE for open-ending
mode as it is expected behaviour and most of the backup partition
tables should be located near some of the last blocks which will
always make open-ending read exceed the capacity of cards.
Fixes: 9820a5b111 ("mmc: core: for data errors, take response of stop cmd into account")
Fixes: a04e6bae9e ("mmc: core: check also R1 response for stop commands")
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Current max_register setting breaks reading nvram on certain chips and
also reading the standard registers on RX8130 where register map starts
at 0x10.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Fixes: 11e5890b53 "rtc: ds1307: convert driver to regmap"
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
During a global reset, we disable the irq. As we disable the irq, the
hardware may be raising a GT interrupt that we then ignore, leaving it
pending in the GTIIR. After the reset, we then re-enable the irq,
triggering the pending interrupt. However, that interrupt was for the
stale state from before the reset, and the contents of the CSB buffer
are now invalid.
v2: Add a comment to make it clear that the double clear is purely my
paranoia.
Reported-by: "Dong, Chuanxiao" <chuanxiao.dong@intel.com>
Fixes: 821ed7df6e ("drm/i915: Update reset path to fix incomplete requests")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: "Dong, Chuanxiao" <chuanxiao.dong@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170807121919.30165-1-chris@chris-wilson.co.uk
Link: https://patchwork.freedesktop.org/patch/msgid/20170818090509.5363-1-chris@chris-wilson.co.uk
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
(cherry picked from commit 64f09f00ca)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The commit 213e08ad60
("drm/i915/bxt: add bxt dsi gpio element support")
enables GPIO support for Broxton based platforms.
While using that API we might get into troubles in the future, because
we can't rely on label name in the driver since vendor firmware might
provide any GPIO pin there, e.g. "reset", and even mark it in _DSD (in
which case the request will fail).
To avoid inconsistency and potential issues we have two options:
a) generate GPIO ACPI mapping table and supply it via
acpi_dev_add_driver_gpios(), or
b) just pass NULL as connection ID.
The b) approach is much simpler and would work since the driver relies
on GPIO indices only. Moreover, the _CRS fallback mechanism, when
requesting GPIO, has been made stricter, and supplying non-NULL
connection ID when neither _DSD, nor GPIO ACPI mapping is present, is
making request fail.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101921
Fixes: f10e4bf663 ("gpio: acpi: Even more tighten up ACPI GPIO lookups")
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Tested-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170817105541.63914-1-andriy.shevchenko@linux.intel.com
(cherry picked from commit cd55a1fbd2)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
knav_pool_create is an exported function. In the event of a call
before knav_queue_probe, we encounter a NULL pointer dereference
in the following line. Hence return -EPROBE_DEFER to the caller till
the kdev pointer is non-NULL.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In fib6_add(), it is possible that fib6_add_1() picks an intermediate
node and sets the node's fn->leaf to NULL in order to add this new
route. However, if fib6_add_rt2node() fails to add the new
route for some reason, fn->leaf will be left as NULL and could
potentially cause crash when fn->leaf is accessed in fib6_locate().
This patch makes sure fib6_repair_tree() is called to properly repair
fn->leaf in the above failure case.
Here is the syzkaller reported general protection fault in fib6_locate:
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
Modules linked in:
CPU: 0 PID: 40937 Comm: syz-executor3 Not tainted
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
task: ffff8801d7d64100 ti: ffff8801d01a0000 task.ti: ffff8801d01a0000
RIP: 0010:[<ffffffff82a3e0e1>] [<ffffffff82a3e0e1>] __ipv6_prefix_equal64_half include/net/ipv6.h:475 [inline]
RIP: 0010:[<ffffffff82a3e0e1>] [<ffffffff82a3e0e1>] ipv6_prefix_equal include/net/ipv6.h:492 [inline]
RIP: 0010:[<ffffffff82a3e0e1>] [<ffffffff82a3e0e1>] fib6_locate_1 net/ipv6/ip6_fib.c:1210 [inline]
RIP: 0010:[<ffffffff82a3e0e1>] [<ffffffff82a3e0e1>] fib6_locate+0x281/0x3c0 net/ipv6/ip6_fib.c:1233
RSP: 0018:ffff8801d01a36a8 EFLAGS: 00010202
RAX: 0000000000000020 RBX: ffff8801bc790e00 RCX: ffffc90002983000
RDX: 0000000000001219 RSI: ffff8801d01a37a0 RDI: 0000000000000100
RBP: ffff8801d01a36f0 R08: 00000000000000ff R09: 0000000000000000
R10: 0000000000000003 R11: 0000000000000000 R12: 0000000000000001
R13: dffffc0000000000 R14: ffff8801d01a37a0 R15: 0000000000000000
FS: 00007f6afd68c700(0000) GS:ffff8801db400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000004c6340 CR3: 00000000ba41f000 CR4: 00000000001426f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Stack:
ffff8801d01a37a8 ffff8801d01a3780 ffffed003a0346f5 0000000c82a23ea0
ffff8800b7bd7700 ffff8801d01a3780 ffff8800b6a1c940 ffffffff82a23ea0
ffff8801d01a3920 ffff8801d01a3748 ffffffff82a223d6 ffff8801d7d64988
Call Trace:
[<ffffffff82a223d6>] ip6_route_del+0x106/0x570 net/ipv6/route.c:2109
[<ffffffff82a23f9d>] inet6_rtm_delroute+0xfd/0x100 net/ipv6/route.c:3075
[<ffffffff82621359>] rtnetlink_rcv_msg+0x549/0x7a0 net/core/rtnetlink.c:3450
[<ffffffff8274c1d1>] netlink_rcv_skb+0x141/0x370 net/netlink/af_netlink.c:2281
[<ffffffff82613ddf>] rtnetlink_rcv+0x2f/0x40 net/core/rtnetlink.c:3456
[<ffffffff8274ad38>] netlink_unicast_kernel net/netlink/af_netlink.c:1206 [inline]
[<ffffffff8274ad38>] netlink_unicast+0x518/0x750 net/netlink/af_netlink.c:1232
[<ffffffff8274b83e>] netlink_sendmsg+0x8ce/0xc30 net/netlink/af_netlink.c:1778
[<ffffffff82564aff>] sock_sendmsg_nosec net/socket.c:609 [inline]
[<ffffffff82564aff>] sock_sendmsg+0xcf/0x110 net/socket.c:619
[<ffffffff82564d62>] sock_write_iter+0x222/0x3a0 net/socket.c:834
[<ffffffff8178523d>] new_sync_write+0x1dd/0x2b0 fs/read_write.c:478
[<ffffffff817853f4>] __vfs_write+0xe4/0x110 fs/read_write.c:491
[<ffffffff81786c38>] vfs_write+0x178/0x4b0 fs/read_write.c:538
[<ffffffff817892a9>] SYSC_write fs/read_write.c:585 [inline]
[<ffffffff817892a9>] SyS_write+0xd9/0x1b0 fs/read_write.c:577
[<ffffffff82c71e32>] entry_SYSCALL_64_fastpath+0x12/0x17
Note: there is no "Fixes" tag as this seems to be a bug introduced
very early.
Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This important to call qdisc_tree_reduce_backlog() after changing queue
length. Parent qdisc should deactivate class in ->qlen_notify() called from
qdisc_tree_reduce_backlog() but this happens only if qdisc->q.qlen in zero.
Missed class deactivations leads to crashes/warnings at picking packets
from empty qdisc and corrupting state at reactivating this class in future.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Fixes: 86a7996cc8 ("net_sched: introduce qdisc_replace() helper")
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Eric Leblond <eric@regit.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Looks like this was accidentally missed, so still add s390x
as supported eBPF JIT arch to bpf_jit_enable.
Fixes: 014cd0a368 ("bpf: Update sysctl documentation to list all supported architectures")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This definition in Makefile.dtbinst:
export dtbinst-root ?= $(obj)
should define and export dtbinst-root when handling the root dts
directory, and do nothing in the subdirectories. However some shells,
including dash, will not pass through environment variables whose name
includes a hyphen. Usually GNU make does not use a shell to recurse,
but if e.g. $(srctree) contains '~' it will use a shell here.
Rename the variable to dtbinst_root.
References: https://bugs.debian.org/833561
Fixes: 323a028d39cdi ("dts, kbuild: Implement support for dtb vendor subdirs")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Shaohua Li