Before this patch, a simple typo accidentally added \n to the jid=
string for lock_nolock mounts. This made it impossible to mount a
gfs2 file system with a journal other than journal0. Thus:
mount -tgfs2 -o hostdata="jid=1" <device> <mount pt>
Resulted in:
mount: wrong fs type, bad option, bad superblock on <device>
In most cases this is not a problem. However, for debugging and
testing purposes we sometimes want to test the integrity of other
journals. This patch removes the unnecessary \n and thus allows
lock_nolock users to specify an alternate journal.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before for this patch, function inode_go_sync ignored io errors
during inode_go_sync, overwriting them with metadata write errors:
error = filemap_fdatawait(mapping);
mapping_set_error(mapping, error);
}
error = filemap_fdatawait(metamapping);
...
return error;
So any errors returned by the inode write would be forgotten if the
metadata write succeeded. This patch still does both writes, but
only sets error if it's still zero. That way, any errors will be
reported by to the caller, do_xmote, which will take appropriate
action and report the error.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Fix several issues in the previous gfs2_find_jhead fix:
* When updating @blocks_submitted, @block refers to the first block block not
submitted yet, not the last block submitted, so fix an off-by-one error.
* We want to ensure that @blocks_submitted is far enough ahead of @blocks_read
to guarantee that there is in-flight I/O. Otherwise, we'll eventually end up
waiting for pages that haven't been submitted, yet.
* It's much easier to compare the number of blocks added with the number of
blocks submitted to limit the maximum bio size.
* Even with bio chaining, we can keep adding blocks until we reach the maximum
bio size, as long as we stop at a page boundary. This simplifies the logic.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Bob Peterson <rpeterso@redhat.com>
This reverts commit df5db5f9ee.
This patch fixes a regression: patch df5db5f9ee allowed function
run_queue() to bypass its call to do_xmote() if revokes were queued for
the glock. That's wrong because its call to do_xmote() is what is
responsible for calling the go_sync() glops functions to sync both
the ail list and any revokes queued for it. By bypassing the call,
gfs2 could get into a stand-off where the glock could not be demoted
until its revokes are written back, but the revokes would not be
written back because do_xmote() was never called.
It "sort of" works, however, because there are other mechanisms like
the log flush daemon (logd) that can sync the ail items and revokes,
if it deems it necessary. The problem is: without file system pressure,
it might never deem it necessary.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, if the go_sync operation returned an error during
the do_xmote process (such as unable to sync metadata to the journal)
the code did goto out. That kept the glock locked, so it could not be
given away, which correctly avoids file system corruption. However,
it never set the withdraw bit or requeueing the glock work. So it would
hang forever, unable to ever demote the glock.
This patch changes to goto to a new label, skip_inval, so that errors
from go_sync are treated the same way as errors from go_inval:
The delayed withdraw bit is set and the work is requeued. That way,
the logd should eventually figure out there's a problem and withdraw
properly there.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
This patch rearranges gfs2_add_revoke so that the extra glock
reference is added earlier on in the function to avoid races in which
the glock is freed before the new reference is taken.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, function gfs2_quota_unlock checked if quotas are
turned off, and if so, it branched to label out, which called
gfs2_quota_unhold. With the new system of gfs2_qa_get and put, we
no longer want to call gfs2_quota_unhold or we won't balance our
gets and puts.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, function gfs2_quota_lock checked if it was called
from a privileged user, and if so, it bypassed the quota check:
superuser can operate outside the quotas.
That's the wrong place for the check because the lock/unlock functions
are separate from the lock_check function, and you can do lock and
unlock without actually checking the quotas.
This patch moves the check to gfs2_quota_lock_check.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
This patch removes a check from gfs2_quota_check for whether quotas
are enabled by the superblock. There is a test just prior for the
GIF_QD_LOCKED bit in the inode, and that can only be set by functions
that already check that quotas are enabled in the superblock.
Therefore, the check is redundant.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, gfs2_quota_change() would BUG_ON if the
qa_ref counter was not a positive number. This patch changes it to
be a withdraw instead. That way we can debug things more easily.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
This patch fixes a couple of places in which gfs2_qa_get and gfs2_qa_put are
not balanced: we now keep references around whenever a file is open for writing
(see gfs2_open_common and gfs2_release), so we need to put all references we
grab in function gfs2_create_inode. This was broken in the successful case and
on one error path.
This also means that we don't have a reference to put in gfs2_evict_inode.
In addition, gfs2_qa_put was called for the wrong inode in gfs2_link.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
It turns out that when extending an existing bio, gfs2_find_jhead fails to
check if the block number is consecutive, which leads to incorrect reads for
fragmented journals.
In addition, limit the maximum bio size to an arbitrary value of 2 megabytes:
since commit 07173c3ec2 ("block: enable multipage bvecs"), if we just keep
adding pages until bio_add_page fails, bios will grow much larger than useful,
which pins more memory than necessary with barely any additional performance
gains.
Fixes: f4686c26ec ("gfs2: read journal in large chunks")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Make sure we don't walk past the end of the metadata in gfs2_walk_metadata: the
inode holds fewer pointers than indirect blocks.
Slightly clean up gfs2_iomap_get.
Fixes: a27a0c9b6a ("gfs2: gfs2_walk_metadata fix")
Cc: stable@vger.kernel.org # v5.3+
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
When the gfs2_logd daemon withdrew, the withdraw sequence called
into make_fs_ro() to make the file system read-only. That caused the
journal descriptors to be freed. However, those journal descriptors
were used by gfs2_logd's call to gfs2_ail_flush_reqd(). This caused
a use-after free and NULL pointer dereference.
This patch changes function gfs2_logd() so that it stops all logd
work until the thread is told to stop. Once a withdraw is done,
it only does an interruptible sleep.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, when the logd daemon was forced to withdraw, it
would try to request its journal be recovered by another cluster node.
However, in single-user cases with lock_nolock, there are no other
nodes to recover the journal. Function signal_our_withdraw() was
recognizing the lock_nolock situation, but not until after it had
evicted its journal inode. Since the journal descriptor that points
to the inode was never removed from the master list, when the unmount
occurred, it did another iput on the evicted inode, which resulted in
a BUG_ON(inode->i_state & I_CLEAR).
This patch moves the check for this situation earlier in function
signal_our_withdraw(), which avoids the extra iput, so the unmount
may happen normally.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, if an error was detected from glock function go_sync
by function do_xmote, it would return. But the function had temporarily
unlocked the gl_lockref spin_lock, and it never re-locked it. When the
caller of do_xmote tried to unlock it again, it was already unlocked,
which resulted in a corrupted spin_lock value.
This patch makes sure the gl_lockref spin_lock is re-locked after it is
unlocked.
Thanks to Wu Bo <wubo40@huawei.com> for reporting this problem.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
After a gfs2 file system withdraw, any attempt to read metadata is
automatically rejected by function gfs2_meta_read() except for reads
of the journal inode. This turns out to be a problem because function
signal_our_withdraw() repeatedly calls check_journal_clean() which reads
the metadata (both its dinode and indirect blocks) to see if the entire
journal is mapped. The dinode read works, but reading the indirect blocks
returns -EIO which gets sent back up and causes a consistency error.
This results in withdraw-from-withdraw, which becomes a deadlock.
This patch changes the test in gfs2_meta_read() to allow all metadata
reads for the journal. Instead of checking the journal block, it now
checks for the journal inode glock which is the same for all blocks in
the journal. This allows check_journal_clean() to properly check the
journal without trying to withdraw recursively.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
are related to corruption that occurs when journals are replayed.
For example:
1. A node fails while writing to the file system.
2. Other nodes use the metadata that was once used by the failed node.
3. When the node returns to the cluster, its journal is replayed,
but the older metadata blocks overwrite the changes from step 2.
- Fixed the recovery sequence to prevent corruption during journal replay.
- Many bug fixes found during recovery testing.
- New improved file system withdraw sequence.
- Fixed how resource group buffers are managed.
- Fixed how metadata revokes are tracked and written.
- Improve processing of IO errors hit by daemons like logd and quotad.
- Improved error checking in metadata writes.
- Fixed how qadata quota data structures are managed.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE89F0ZrnZapxy/9qS14th09/3ejsFAl6Db/QACgkQ14th09/3
ejvVTgf+IdHXfmpv3ftah8lDDpbsnSKZYRC1NW7skQB+NVG9KtJhtzy1nldaMqMv
s8wQ5aGKrfBfmzg8IZ9Pt3dCItFqC5d8IqcO0M0FtNuyN+27ETUUMnqBf1NwL6wI
iAm/+ncZ/BiZN2P8MgXV3OgRGvaC9ebmz860+nthwyJT+6y8d8Qab7pUfyix5e0d
oTgDhEJqF0DOrGsrlS5rxjTU+RMixtepsAW958D4Eks28OlyduRAj6fAMDoLN2/E
WoDpX6iKeczH0lOZxnIVQOkCztDaa0jDlK2JK7sJRBMpNxj77aUn4cffY+b/A4kk
sR5gjsiHoesdAMEpHIXSdEcYMIstIg==
=VEKB
-----END PGP SIGNATURE-----
Merge tag 'gfs2-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Bob Peterson:
"We've got a lot of patches (39) for this merge window. Most of these
patches are related to corruption that occurs when journals are
replayed. For example:
1. A node fails while writing to the file system.
2. Other nodes use the metadata that was once used by the failed
node.
3. When the node returns to the cluster, its journal is replayed, but
the older metadata blocks overwrite the changes from step 2.
Summary:
- Fixed the recovery sequence to prevent corruption during journal
replay.
- Many bug fixes found during recovery testing.
- New improved file system withdraw sequence.
- Fixed how resource group buffers are managed.
- Fixed how metadata revokes are tracked and written.
- Improve processing of IO errors hit by daemons like logd and
quotad.
- Improved error checking in metadata writes.
- Fixed how qadata quota data structures are managed"
* tag 'gfs2-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (39 commits)
gfs2: Fix oversight in gfs2_ail1_flush
gfs2: change from write to read lock for sd_log_flush_lock in journal replay
gfs2: instrumentation wrt ail1 stuck
gfs2: don't lock sd_log_flush_lock in try_rgrp_unlink
gfs2: Remove unnecessary gfs2_qa_{get,put} pairs
gfs2: Split gfs2_rsqa_delete into gfs2_rs_delete and gfs2_qa_put
gfs2: Change inode qa_data to allow multiple users
gfs2: eliminate gfs2_rsqa_alloc in favor of gfs2_qa_alloc
gfs2: Switch to list_{first,last}_entry
gfs2: Clean up inode initialization and teardown
gfs2: Additional information when gfs2_ail1_flush withdraws
gfs2: leaf_dealloc needs to allocate one more revoke
gfs2: allow journal replay to hold sd_log_flush_lock
gfs2: don't allow releasepage to free bd still used for revokes
gfs2: flesh out delayed withdraw for gfs2_log_flush
gfs2: Do proper error checking for go_sync family of glops functions
gfs2: Don't demote a glock until its revokes are written
gfs2: drain the ail2 list after io errors
gfs2: Withdraw in gfs2_ail1_flush if write_cache_pages fails
gfs2: Do log_flush in gfs2_ail_empty_gl even if ail list is empty
...
Ordinarily, function gfs2_ail1_start_one issues a write request
for one item on the ail1 list, then returns -EBUSY. This makes the
caller, gfs2_ail1_flush, loop around and start another. However,
it was not clearing the -EBUSY return code each time through the loop.
So on rare occasions, like when the wbc runs out of nr_to_write, it
remained set to -EBUSY, which triggered an error and withdraw.
This patch sets the return code to 0 each time through the restart
loop so this won't happen anymore.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Function gfs2_recover_func grabs the sd_log_flush_lock rw_semaphore in
write mode. This is unnecessary because we only need to prevent log flush
from using sd_log_bio bio while it does. Therefore, a read lock will be
enough. This is a small step in cleaning up log flush.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, if the ail1 flush got stuck for some reason, there
were no clues as to why. This patch introduces a check for getting
stuck for more than a minute, and if it happens, it dumps the items
still remaining on the ail1 list.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
In function try_rgrp_unlink, we added a temporary lock of the
sd_log_flush_lock while searching the bitmaps. This protected us from
problems in which dinodes being freed were still in a state of flux
because the rgrp was in an active transaction. It was a kludge.
Now that we've straightened out the code for inode eviction, deletes,
and all the recovery mess, we no longer need this kludge.
This patch removes it, and should improve performance.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
We now get the quota data structure when opening a file writable and put it
when closing that writable file descriptor, so there no longer is a need for
gfs2_qa_{get,put} while we're holding a writable file descriptor.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Keeping reservations and quotas separate helps reviewing the code.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, multiple users called gfs2_qa_alloc which allocated
a qadata structure to the inode, if quotas are turned on. Later, in
file close or evict, the structure was deleted with gfs2_qa_delete.
But there can be several competing processes who need access to the
structure. There were races between file close (release) and the others.
Thus, a release could delete the structure out from under a process
that relied upon its existence. For example, chown.
This patch changes the management of the qadata structures to be
a get/put scheme. Function gfs2_qa_alloc has been changed to gfs2_qa_get
and if the structure is allocated, the count essentially starts out at
1. Function gfs2_qa_delete has been renamed to gfs2_qa_put, and the
last guy to decrement the count to 0 frees the memory.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, multiple callers called gfs2_rsqa_alloc to force
the existence of a reservations structure and a quota data structure
if needed. However, now the reservations are handled separately, so
the quota data is only the quota data. So we eliminate the one in
favor of just calling gfs2_qa_alloc directly.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Replace open-coded versions of list_first_entry and list_last_entry with those
functions.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
When allocating a new inode, mark the iopen glock holder as uninitialized to
make sure gfs2_evict_inode won't fail after an incomplete create or lookup. In
gfs2_evict_inode, allow the inode glock to be NULL and remove the duplicate
iopen glock teardown code. In gfs2_inode_lookup, don't tear down things that
gfs2_evict_inode will already tear down.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
with the way fs/namei.c:do_last() had been done, ->atomic_open()
instances needed to recognize the case when existing file got
found with O_EXCL|O_CREAT, either by falling back to finish_no_open()
or failing themselves. gfs2 one didn't.
Fixes: 6d4ade986f (GFS2: Add atomic_open support)
Cc: stable@kernel.org # v3.11
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Before this patch, if gfs2_ail1_flush gets an error from function
gfs2_ail1_start_one (which comes indirectly from generic_writepages)
the file system is withdrawn, but without any explanation why.
This patch adds an error message if gfs2_ail1_flush gets an error
from gfs2_ail1_start_one.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Function leaf_dealloc was not allocating enough journal space for
revokes. Before, it allocated 'l_blocks' revokes, but it needs one
more for the revoke of the dinode that is modified. This patch adds
the needed revoke entry to function leaf_dealloc.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, journal replays could stomp on log flushes
and each other because both log flushes and journal replays used
the same sd_log_bio. Function gfs2_log_flush prevents other log
flushes from interfering by taking the sd_log_flush_lock rwsem
during the flush. However, it does not protect against journal
replays. This patch allows the journal replay to take the same
sd_log_flush_lock rwsem so use of the sd_log_bio is not stomped.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, function gfs2_releasepage would free any bd
elements that had been used for the page being released. However,
those bd elements may still be queued to the sd_log_revokes list,
in which case we cannot free them until the revoke has been issued.
This patch adds additional checks for bds that are still being
used for revokes.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Function gfs2_log_flush() had a few places where it tried to withdraw
from the file system when errors were encountered. The problem is,
it should delay those withdraws until the log flush lock is no longer
held.
This patch creates a new function just for delayed withdraws for
situations like this. If errors=panic was specified on mount, we
still want to do it the old fashioned way because the panic it does
not help to delay in that situation.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, function do_xmote would try to sync out the glock
dirty data by calling the appropriate glops function XXX_go_sync()
but it did not check for a good return code. If the sync was not
possible due to an io error or whatever, do_xmote would continue on
and call go_inval and release the glock to other cluster nodes.
When those nodes go to replay the journal, they may already be holding
glocks for the journal records that should have been synced, but were
not due to the ignored error.
This patch introduces proper error code checking to the go_sync
family of glops functions.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, run_queue would demote glocks based on whether
there are any more holders. But if the glock has pending revokes that
haven't been written to the media, giving up the glock might end in
file system corruption if the revokes never get written due to
io errors, node crashes and fences, etc. In that case, another node
will replay the metadata blocks associated with the glock, but
because the revoke was never written, it could replay that block
even though the glock had since been granted to another node who
might have made changes.
This patch changes the logic in run_queue so that it never demotes
a glock until its count of pending revokes reaches zero.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, gfs2_logd continually tried to flush its journal
log, after the file system is withdrawn. We don't want to write anything
to the journal, lest we add corruption. Best course of action is to
drain the ail1 into the ail2 list (via gfs2_ail1_empty) then drain the
ail2 list with a new function, ail2_drain.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, function gfs2_ail1_start_one would return any
errors it received from write_cache_pages (except -EBUSY) but it did
not withdraw. Since function gfs2_ail1_flush just checks for the bad
return code and loops, the loop might potentially never end.
This patch adds some logic to allow it to exit the loop and withdraw
properly when errors are received from write_cache_pages.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, if gfs2_ail_empty_gl saw there was nothing on
the ail list, it would return and not flush the log. The problem
is that there could still be a revoke for the rgrp sitting on the
sd_log_le_revoke list that's been recently taken off the ail list.
But that revoke still needs to be written, and the rgrp_go_inval
still needs to call log_flush_wait to ensure the revokes are all
properly written to the journal before we relinquish control of
the glock to another node. If we give the glock to another node
before we have this knowledge, the node might crash and its journal
replayed, in which case the missing revoke would allow the journal
replay to replay the rgrp over top of the rgrp we already gave to
another node, thus overwriting its changes and corrupting the
file system.
This patch makes gfs2_ail_empty_gl still call gfs2_log_flush rather
than returning.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, function do_xmote just assumed all the writes
submitted to the journal were finished and successful, and it
called the go_unlock function to release the dlm lock. But if
they're not, and a revoke failed to make its way to the journal,
a journal replay on another node will cause corruption if we
let the go_inval function continue and tell dlm to release the
glock to another node. This patch adds a couple checks for errors
in do_xmote after the calls to go_sync and go_inval. If an error
is found, we cannot withdraw yet, because the withdraw itself
uses glocks to make the file system read-only. Instead, we flag
the error. Later, asserts should cause another node to replay
the journal before continuing, thus protecting rgrp and dinode
glocks and maintaining the integrity of the metadata. Note that
we only need to do this for journaled glocks. System glocks
should be able to progress even under withdrawn conditions.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, function gfs2_end_log_write would detect any IO
errors writing to the journal and put out an appropriate message,
but it never set a withdrawing condition. Eventually, the log daemon
would see the error and determine it was time to withdraw, but in
the meantime, other processes could continue running as if nothing
bad ever happened. The biggest consequence is that __gfs2_glock_put
would BUG() when it saw that there were still unwritten items.
This patch sets the WITHDRAWING status as soon as an IO error is
detected, and that way, the BUG will be avoided so the file system
can be properly withdrawn and unmounted.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, function gfs2_write_revokes would call
gfs2_ail1_empty, then traverse the sd_ail1_list looking for
transactions that had bds which were no longer queued to a glock.
And if it found some, it would try to issue revokes for them, up to
a predetermined maximum. There were two problems with how it did
this. First was the fact that gfs2_ail1_empty moves transactions
which have nothing remaining on the ail1 list from the sd_ail1_list
to the sd_ail2_list, thus making its traversal of sd_ail1_list
miss them completely, and therefore, never issue revokes for them.
Second was the fact that there were three traversals (or partial
traversals) of the sd_ail1_list, each of which took and then
released the sd_ail_lock lock: First inside gfs2_ail1_empty,
second to determine if there are any revokes to be issued, and
third to actually issue them. All this taking and releasing of the
sd_ail_lock meant other processes could modify the lists and the
conditions in which we're working.
This patch simplies the whole process by adding a new parameter
to function gfs2_ail1_empty, max_revokes. For normal calls, this
is passed in as 0, meaning we don't want to issue any revokes.
For function gfs2_write_revokes, we pass in the maximum number
of revokes we can, thus allowing gfs2_ail1_empty to add the
revokes where needed. This simplies the code, allows for a single
holding of the sd_ail_lock, and allows gfs2_ail1_empty to add
revokes for all the necessary bd items without missing any.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, function check_journal_clean would give messages
related to journal recovery. That's fine for mount time, but when a
node withdraws and forces replay that way, we don't want all those
distracting and misleading messages. This patch adds a new parameter
to make those messages optional.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, the rgrp_go_inval and inode_go_inval functions each
checked if there were any items left on the ail count (by way of a
count), and if so, did a withdraw. But the withdraw code now uses
glocks when changing the file system to read-only status. So we can
not have glock functions withdrawing or a hang will likely result:
The glocks can't be serviced by the work_func if the work_func is
busy doing its own withdraw.
This patch removes the checks from the go_inval functions and adds
a centralized check in do_xmote to warn about the problem and not
withdraw, but flag the error so it's eventually caught when the logd
daemon eventually runs.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
When a node withdraws from a file system, it often leaves its journal
in an incomplete state. This is especially true when the withdraw is
caused by io errors writing to the journal. Before this patch, a
withdraw would try to write a "shutdown" record to the journal, tell
dlm it's done with the file system, and none of the other nodes
know about the problem. Later, when the problem is fixed and the
withdrawn node is rebooted, it would then discover that its own
journal was incomplete, and replay it. However, replaying it at this
point is almost guaranteed to introduce corruption because the other
nodes are likely to have used affected resource groups that appeared
in the journal since the time of the withdraw. Replaying the journal
later will overwrite any changes made, and not through any fault of
dlm, which was instructed during the withdraw to release those
resources.
This patch makes file system withdraws seen by the entire cluster.
Withdrawing nodes dequeue their journal glock to allow recovery.
The remaining nodes check all the journals to see if they are
clean or in need of replay. They try to replay dirty journals, but
only the journals of withdrawn nodes will be "not busy" and
therefore available for replay.
Until the journal replay is complete, no i/o related glocks may be
given out, to ensure that the replay does not cause the
aforementioned corruption: We cannot allow any journal replay to
overwrite blocks associated with a glock once it is held.
The "live" glock which is now used to signal when a withdraw
occurs. When a withdraw occurs, the node signals its withdraw by
dequeueing the "live" glock and trying to enqueue it in EX mode,
thus forcing the other nodes to all see a demote request, by way
of a "1CB" (one callback) try lock. The "live" glock is not
granted in EX; the callback is only just used to indicate a
withdraw has occurred.
Note that all nodes in the cluster must wait for the recovering
node to finish replaying the withdrawing node's journal before
continuing. To this end, it checks that the journals are clean
multiple times in a retry loop.
Also note that the withdraw function may be called from a wide
variety of situations, and therefore, we need to take extra
precautions to make sure pointers are valid before using them in
many circumstances.
We also need to take care when glocks decide to withdraw, since
the withdraw code now uses glocks.
Also, before this patch, if a process encountered an error and
decided to withdraw, if another process was already withdrawing,
the second withdraw would be silently ignored, which set it free
to unlock its glocks. That's correct behavior if the original
withdrawer encounters further errors down the road. But if
secondary waiters don't wait for the journal replay, unlocking
glocks will allow other nodes to use them, despite the fact that
the journal containing those blocks is being replayed. The
replay needs to finish before our glocks are released to other
nodes. IOW, secondary withdraws need to wait for the first
withdraw to finish.
For example, if an rgrp glock is unlocked by a process that didn't
wait for the first withdraw, a journal replay could introduce file
system corruption by replaying a rgrp block that has already been
granted to a different cluster node.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
We need to allow some glocks to be enqueued, dequeued, promoted, and demoted
when we're withdrawn. For example, to maintain metadata integrity, we should
disallow the use of inode and rgrp glocks when withdrawn. Other glocks, like
iopen or the transaction glocks may be safely used because none of their
metadata goes through the journal. So in general, we should disallow all
glocks with an address space, and allow all the others. One exception is:
we need to allow our active journal to be demoted so others may recover it.
Allowing glocks after withdraw gives us the ability to take appropriate
action (in a following patch) to have our journal properly replayed by
another node rather than just abandoning the current transactions and
pretending nothing bad happened, leaving the other nodes free to modify
the blocks we had in our journal, which may result in file system
corruption.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch function check_journal_clean was in ops_fstype.c.
This patch moves it to util.c so we can make use of it elsewhere
in a future patch.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
When a node fails, user space informs dlm of the node failure,
and dlm instructs gfs2 on the surviving nodes to perform journal
recovery. It does this by calling various callback functions in
lock_dlm.c. To mark its progress, it keeps generation numbers
and recover bits in a dlm "control" lock lvb, which is seen by
all nodes to determine which journals need to be replayed.
The gfs2 on all nodes get the same recovery requests from dlm,
so they all try to do the recovery, but only one will be
granted the exclusive lock on the journal. The others fail
with a "Busy" message on their "try lock."
However, when a node is withdrawn, it cannot safely do any
recovery or replay any journals. To make matters worse,
gfs2 might withdraw as a result of attempting recovery. For
example, this might happen if the device goes offline, or if
an hba fails. But in today's gfs2 code, it doesn't check for
being withdrawn at any step in the recovery process. What's
worse is that these callbacks from dlm have no return code,
so there is no way to indicate failure back to dlm. We can
send a "Recovery failed" uevent eventually, but that tells
user space what happened, not dlm's kernel code.
Before this patch, lock_dlm would perform its recovery steps but
ignore the result, and eventually it would still update its
generation number in the lvb, despite the fact that it may have
withdrawn or encountered an error. The other nodes would then
see the newer generation number in the lvb and conclude that
they don't need to do recovery because the generation number
is newer than the last one they saw. They think a different
node has already recovered the journal.
This patch adds checks to several of the callbacks used by dlm
in its recovery state machine so that the functions are ignored
and skipped if an io error has occurred or if the file system
is withdrawn. That prevents the lvb bits from being updated, and
therefore dlm and user space still see the need for recovery to
take place.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, all io errors received by the quota daemon or the
logd daemon would cause a complaint message to be issued, such as:
gfs2: fsid=dm-13.0: Error 10 writing to journal, jid=0
This patch changes it so that the error message is only issued the
first time the error is encountered.
Also, before this patch function gfs2_end_log_write did not set the
sd_log_error value, so log errors would not cause the file system to
be withdrawn. This patch sets the error code so the file system is
properly withdrawn if an io error is encountered writing to the journal.
WARNING: This change in function breaks check xfstests generic/441
and causes it to fail: io errors writing to the log should cause a
file system to be withdrawn, and no further operations are tolerated.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, gfs2 kept track of journal io errors in two
places sd_log_error and the SDF_AIL1_IO_ERROR flag in sd_flags.
This patch consolidates the two into sd_log_error so that it
reflects the first error encountered writing to the journal.
In future patches, we will take advantage of this by checking
this value rather than having to check both when reacting to
io errors.
In addition, this fixes a tight loop in unmount: If buffers
get on the ail1 list and an io error occurs elsewhere, the
ail1 list would never be cleared because they were always busy.
So unmount would hang, waiting for the ail1 list to empty.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, the rgrp code had a serious problem related to
how it managed buffer_heads for resource groups. The problem caused
file system corruption, especially in cases of journal replay.
When an rgrp glock was demoted to transfer ownership to a
different cluster node, do_xmote() first calls rgrp_go_sync and then
rgrp_go_inval, as expected. When it calls rgrp_go_sync, that called
gfs2_rgrp_brelse() that dropped the buffer_head reference count.
In most cases, the reference count went to zero, which is right.
However, there were other places where the buffers are handled
differently.
After rgrp_go_sync, do_xmote called rgrp_go_inval which called
gfs2_rgrp_brelse a second time, then rgrp_go_inval's call to
truncate_inode_pages_range would get rid of the pages in memory,
but only if the reference count drops to 0.
Unfortunately, gfs2_rgrp_brelse was setting bi->bi_bh = NULL.
So when rgrp_go_sync called gfs2_rgrp_brelse, it lost the pointer
to the buffer_heads in cases where the reference count was still 1.
Therefore, when rgrp_go_inval called gfs2_rgrp_brelse a second time,
it failed the check for "if (bi->bi_bh)" and thus failed to call
brelse a second time. Because of that, the reference count on those
buffers sometimes failed to drop from 1 to 0. And that caused
function truncate_inode_pages_range to keep the pages in page cache
rather than freeing them.
The next time the rgrp glock was acquired, the metadata read of
the rgrp buffers re-used the pages in memory, which were now
wrong because they were likely modified by the other node who
acquired the glock in EX (which is why we demoted the glock).
This re-use of the page cache caused corruption because changes
made by the other nodes were never seen, so the bitmaps were
inaccurate.
For some reason, the problem became most apparent when journal
replay forced the replay of rgrps in memory, which caused newer
rgrp data to be overwritten by the older in-core pages.
A big part of the problem was that the rgrp buffer were released
in multiple places: The go_unlock function would release them when
the glock was released rather than when the glock is demoted,
which is clearly wrong because our intent was to cache them until
the glock is demoted from SH or EX.
This patch attempts to clean up the mess and make one consistent
and centralized mechanism for managing the rgrp buffer_heads by
implementing several changes:
1. It eliminates the call to gfs2_rgrp_brelse() from rgrp_go_sync.
We don't want to release the buffers or zero the pointers when
syncing for the reasons stated above. It only makes sense to
release them when the glock is actually invalidated (go_inval).
And when we do, then we set the bh pointers to NULL.
2. The go_unlock function (which was only used for rgrps) is
eliminated, as we've talked about doing many times before.
The go_unlock function was called too early in the glock dq
process, and should not happen until the glock is invalidated.
3. It also eliminates the call to rgrp_brelse in gfs2_clear_rgrpd.
That will now happen automatically when the rgrp glocks are
demoted, and shouldn't happen any sooner or later than that.
Instead, function gfs2_clear_rgrpd has been modified to demote
the rgrp glocks, and therefore, free those pages, before the
remaining glocks are culled by gfs2_gl_hash_clear. This
prevents the gl_object from hanging around when the glocks are
culled.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
This patch fixes a bug in which function gfs2_log_flush can get into
an infinite loop when a gfs2 file system is withdrawn. The problem
is the infinite loop "for (;;)" in gfs2_log_flush which would never
finish because the io error and subsequent withdraw prevented the
items from being taken off the ail list.
This patch tries to clean up the mess by allowing withdraw situations
to move not-in-flight buffer_heads to the ail2 list, where they will
be dealt with later.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
File system withdraws can be delayed when inconsistencies are
discovered when we cannot withdraw immediately, for example, when
critical spin_locks are held. But delaying the withdraw can cause
gfs2 to ignore the error and keep running for a short period of time.
For example, an rgrp glock may be dequeued and demoted while there
are still buffers that haven't been properly revoked, due to io
errors writing to the journal.
This patch introduces a new concept of a pending withdraw, which
means an inconsistency has been discovered and we need to withdraw
at the earliest possible opportunity. In these cases, we aren't
quite withdrawn yet, but we still need to not dequeue glocks and
other critical things. If we dequeue the glocks and the withdraw
results in our journal being replayed, the replay could overwrite
data that's been modified by a different node that acquired the
glock in the meantime.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
The gfs2_assert functions only print messages when the filesystem hasn't been
withdrawn yet, and they indicate whether or not they've printed something in
their return value. However, none of the callers use that information, so
simply return whether or not the assert has failed.
(The gfs2_assert functions are still backwards; they return false when an
assertion is true.)
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Change the various gfs2_consist functions to return void.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
These arguments are always passed as 0, and they are never evaluated.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
In gfs2_rgrp_verify and compute_bitstructs, make sure to report errors before
withdrawing the filesystem: otherwise, when we withdraw first and withdraw is
configured to panic, we'll never get to the error reporting.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Split gfs2_lm_withdraw into a function that prints an error message and a
function that withdraws the filesystem.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Pull vfs file system parameter updates from Al Viro:
"Saner fs_parser.c guts and data structures. The system-wide registry
of syntax types (string/enum/int32/oct32/.../etc.) is gone and so is
the horror switch() in fs_parse() that would have to grow another case
every time something got added to that system-wide registry.
New syntax types can be added by filesystems easily now, and their
namespace is that of functions - not of system-wide enum members. IOW,
they can be shared or kept private and if some turn out to be widely
useful, we can make them common library helpers, etc., without having
to do anything whatsoever to fs_parse() itself.
And we already get that kind of requests - the thing that finally
pushed me into doing that was "oh, and let's add one for timeouts -
things like 15s or 2h". If some filesystem really wants that, let them
do it. Without somebody having to play gatekeeper for the variants
blessed by direct support in fs_parse(), TYVM.
Quite a bit of boilerplate is gone. And IMO the data structures make a
lot more sense now. -200LoC, while we are at it"
* 'merge.nfs-fs_parse.1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (25 commits)
tmpfs: switch to use of invalfc()
cgroup1: switch to use of errorfc() et.al.
procfs: switch to use of invalfc()
hugetlbfs: switch to use of invalfc()
cramfs: switch to use of errofc() et.al.
gfs2: switch to use of errorfc() et.al.
fuse: switch to use errorfc() et.al.
ceph: use errorfc() and friends instead of spelling the prefix out
prefix-handling analogues of errorf() and friends
turn fs_param_is_... into functions
fs_parse: handle optional arguments sanely
fs_parse: fold fs_parameter_desc/fs_parameter_spec
fs_parser: remove fs_parameter_description name field
add prefix to fs_context->log
ceph_parse_param(), ceph_parse_mon_ips(): switch to passing fc_log
new primitive: __fs_parse()
switch rbd and libceph to p_log-based primitives
struct p_log, variants of warnf() et.al. taking that one instead
teach logfc() to handle prefices, give it saner calling conventions
get rid of cg_invalf()
...
Don't bother with "mixed" options that would allow both the
form with and without argument (i.e. both -o foo and -o foo=bar).
Rather than trying to shove both into a single fs_parameter_spec,
allow having with-argument and no-argument specs with the same
name and teach fs_parse to handle that.
There are very few options of that sort, and they are actually
easier to handle that way - callers end up with less postprocessing.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Unused now.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Don't do a single array; attach them to fsparam_enum() entry
instead. And don't bother trying to embed the names into those -
it actually loses memory, with no real speedup worth mentioning.
Simplifies validation as well.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
In gfs2_file_write_iter, for direct writes, the error checking in the buffered
write fallback case is incomplete. This can cause inode write errors to go
undetected. Fix and clean up gfs2_file_write_iter along the way.
Based on a proposed fix by Christoph Hellwig <hch@lst.de>.
Fixes: 967bcc91b0 ("gfs2: iomap direct I/O support")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Set current->backing_dev_info just around the buffered write calls to
prepare for the next fix.
Fixes: 967bcc91b0 ("gfs2: iomap direct I/O support")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
When the first log header in a journal happens to have a sequence
number of 0, a bug in gfs2_find_jhead() causes it to prematurely exit,
and return an uninitialized jhead with seq 0. This can cause failures
in the caller. For instance, a mount fails in one test case.
The correct behavior is for it to continue searching through the journal
to find the correct journal head with the highest sequence number.
Fixes: f4686c26ec ("gfs2: read journal in large chunks")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
This reverts commit e955537e32.
Before patch e955537e32, tr_num_revoke tracked the number of revokes
added to the transaction, and tr_num_revoke_rm tracked how many
revokes were removed. But since revokes are queued off the sdp
(superblock) pointer, some transactions could remove more revokes
than they added. (e.g. revokes added by a different process).
Commit e955537e32 eliminated transaction variable tr_num_revoke_rm,
but in order to do so, it changed the accounting to always use
tr_num_revoke for its math. Since you can remove more revokes than
you add, tr_num_revoke could now become a negative value.
This negative value broke the assert in function gfs2_trans_end:
if (gfs2_assert_withdraw(sdp, (nbuf <=3D tr->tr_blocks) &&
(tr->tr_num_revoke <=3D tr->tr_revokes)))
One way to fix this is to simply remove the tr_num_revoke clause
from the assert and allow the value to become negative. Andreas
didn't like that idea, so instead, we decided to revert e955537e32.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Since commit 223b2b889f ("GFS2: Fix alignment issue and tidy
gfs2_bitfit"), these 3 macros aren't used anymore, so remove them.
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Since commit 1579343a73 ("GFS2: Remove dirent_first() function"),
these macros aren't used any more, so remove them.
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
The dlm lockspace is set up to have lock value blocks of GDLM_LVB_SIZE bytes,
and dlm is the only lock manager we support, so there is no point in claiming
that the lock value block could have any other size.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
In gfs2_inode_lookup, we initialize inode->i_atime to the lowest
possibly value after gfs2_inode_refresh may already have been called.
This should be the other way around, but we didn't notice because
usually the inode type is known from the directory entry and so
gfs2_inode_lookup won't call gfs2_inode_refresh.
In addition, only initialize ip->i_no_formal_ino from no_formal_ino when
actually needed.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
This patch simply removes variable ret, which is used to store the return
code of its call to __gfs2_jdata_writepage, in favor of just returning the
result directly.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Every caller of function gfs2_struct2blk specified sizeof(u64).
This patch eliminates the unnecessary parameter and replaces the
size calculation with a new superblock variable that is computed
to be the maximum number of block pointers we can fit inside a
log descriptor, as is done for pointers per dinode and indirect
block.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
On filesystems with a block size smaller than the page size,
gfs2_find_jhead can split a page across two bios (for example, when
blocks are not allocated consecutively). When that happens, the first
bio that completes will unlock the page in its bi_end_io handler even
though the page hasn't been read completely yet. Fix that by using a
chained bio for the rest of the page.
While at it, clean up the sector calculation logic in
gfs2_log_alloc_bio. In gfs2_find_jhead, simplify the disk block and
offset calculation logic and fix a variable name.
Fixes: f4686c26ec ("gfs2: read journal in large chunks")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Bob's extensive filesystem withdrawal and recovery testing:
- Don't write log headers after file system withdraw
- clean up iopen glock mess in gfs2_create_inode
- Close timing window with GLF_INVALIDATE_IN_PROGRESS
- Abort gfs2_freeze if io error is seen
- Don't loop forever in gfs2_freeze if withdrawn
- fix infinite loop in gfs2_ail1_flush on io error
- Introduce function gfs2_withdrawn
- fix glock reference problem in gfs2_trans_remove_revoke
Filesystems with a block size smaller than the page size:
- Fix end-of-file handling in gfs2_page_mkwrite
- Improve mmap write vs. punch_hole consistency
Other:
- Remove active journal side effect from gfs2_write_log_header
- Multi-block allocations in gfs2_page_mkwrite
Minor cleanups and coding style fixes:
- Remove duplicate call from gfs2_create_inode
- make gfs2_log_shutdown static
- make gfs2_fs_parameters static
- Some whitespace cleanups
- removed unnecessary semicolon
-----BEGIN PGP SIGNATURE-----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=b1m/
-----END PGP SIGNATURE-----
Merge tag 'gfs2-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull GFS2 updates from Andreas Gruenbacher:
"Bob's extensive filesystem withdrawal and recovery testing:
- don't write log headers after file system withdraw
- clean up iopen glock mess in gfs2_create_inode
- close timing window with GLF_INVALIDATE_IN_PROGRESS
- abort gfs2_freeze if io error is seen
- don't loop forever in gfs2_freeze if withdrawn
- fix infinite loop in gfs2_ail1_flush on io error
- introduce function gfs2_withdrawn
- fix glock reference problem in gfs2_trans_remove_revoke
Filesystems with a block size smaller than the page size:
- fix end-of-file handling in gfs2_page_mkwrite
- improve mmap write vs. punch_hole consistency
Other:
- remove active journal side effect from gfs2_write_log_header
- multi-block allocations in gfs2_page_mkwrite
Minor cleanups and coding style fixes:
- remove duplicate call from gfs2_create_inode
- make gfs2_log_shutdown static
- make gfs2_fs_parameters static
- some whitespace cleanups
- removed unnecessary semicolon"
* tag 'gfs2-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Don't write log headers after file system withdraw
gfs2: Remove duplicate call from gfs2_create_inode
gfs2: clean up iopen glock mess in gfs2_create_inode
gfs2: Close timing window with GLF_INVALIDATE_IN_PROGRESS
gfs2: Abort gfs2_freeze if io error is seen
gfs2: Don't loop forever in gfs2_freeze if withdrawn
gfs2: fix infinite loop in gfs2_ail1_flush on io error
gfs2: Introduce function gfs2_withdrawn
gfs2: fix glock reference problem in gfs2_trans_remove_revoke
gfs2: make gfs2_log_shutdown static
gfs2: Remove active journal side effect from gfs2_write_log_header
gfs2: Fix end-of-file handling in gfs2_page_mkwrite
gfs2: Multi-block allocations in gfs2_page_mkwrite
gfs2: Improve mmap write vs. punch_hole consistency
gfs2: make gfs2_fs_parameters static
gfs2: Some whitespace cleanups
gfs2: removed unnecessary semicolon
As part of the cleanup of some remaining y2038 issues, I came to
fs/compat_ioctl.c, which still has a couple of commands that need support
for time64_t.
In completely unrelated work, I spent time on cleaning up parts of this
file in the past, moving things out into drivers instead.
After Al Viro reviewed an earlier version of this series and did a lot
more of that cleanup, I decided to try to completely eliminate the rest
of it and move it all into drivers.
This series incorporates some of Al's work and many patches of my own,
but in the end stops short of actually removing the last part, which is
the scsi ioctl handlers. I have patches for those as well, but they need
more testing or possibly a rewrite.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=lgCl
-----END PGP SIGNATURE-----
Merge tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground
Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann:
"As part of the cleanup of some remaining y2038 issues, I came to
fs/compat_ioctl.c, which still has a couple of commands that need
support for time64_t.
In completely unrelated work, I spent time on cleaning up parts of
this file in the past, moving things out into drivers instead.
After Al Viro reviewed an earlier version of this series and did a lot
more of that cleanup, I decided to try to completely eliminate the
rest of it and move it all into drivers.
This series incorporates some of Al's work and many patches of my own,
but in the end stops short of actually removing the last part, which
is the scsi ioctl handlers. I have patches for those as well, but they
need more testing or possibly a rewrite"
* tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits)
scsi: sd: enable compat ioctls for sed-opal
pktcdvd: add compat_ioctl handler
compat_ioctl: move SG_GET_REQUEST_TABLE handling
compat_ioctl: ppp: move simple commands into ppp_generic.c
compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t
compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic
compat_ioctl: unify copy-in of ppp filters
tty: handle compat PPP ioctls
compat_ioctl: move SIOCOUTQ out of compat_ioctl.c
compat_ioctl: handle SIOCOUTQNSD
af_unix: add compat_ioctl support
compat_ioctl: reimplement SG_IO handling
compat_ioctl: move WDIOC handling into wdt drivers
fs: compat_ioctl: move FITRIM emulation into file systems
gfs2: add compat_ioctl support
compat_ioctl: remove unused convert_in_user macro
compat_ioctl: remove last RAID handling code
compat_ioctl: remove /dev/raw ioctl translation
compat_ioctl: remove PCI ioctl translation
compat_ioctl: remove joystick ioctl translation
...
- Make iomap_dio_rw callers explicitly tell us if they want us to wait
- Port the xfs writeback code to iomap to complete the buffered io
library functions
- Refactor the unshare code to share common pieces
- Add support for performing copy on write with buffered writes
- Other minor fixes
- Fix unchecked return in iomap_bmap
- Fix a type casting bug in a ternary statement in iomap_dio_bio_actor
- Improve tracepoints for easier diagnostic ability
- Fix pipe page leakage in directio reads
-----BEGIN PGP SIGNATURE-----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=FRl4
-----END PGP SIGNATURE-----
Merge tag 'iomap-5.5-merge-11' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull iomap updates from Darrick Wong:
"In this release, we hoisted as much of XFS' writeback code into iomap
as was practicable, refactored the unshare file data function, added
the ability to perform buffered io copy on write, and tweaked various
parts of the directio implementation as needed to port ext4's directio
code (that will be a separate pull).
Summary:
- Make iomap_dio_rw callers explicitly tell us if they want us to
wait
- Port the xfs writeback code to iomap to complete the buffered io
library functions
- Refactor the unshare code to share common pieces
- Add support for performing copy on write with buffered writes
- Other minor fixes
- Fix unchecked return in iomap_bmap
- Fix a type casting bug in a ternary statement in
iomap_dio_bio_actor
- Improve tracepoints for easier diagnostic ability
- Fix pipe page leakage in directio reads"
* tag 'iomap-5.5-merge-11' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (31 commits)
iomap: Fix pipe page leakage during splicing
iomap: trace iomap_appply results
iomap: fix return value of iomap_dio_bio_actor on 32bit systems
iomap: iomap_bmap should check iomap_apply return value
iomap: Fix overflow in iomap_page_mkwrite
fs/iomap: remove redundant check in iomap_dio_rw()
iomap: use a srcmap for a read-modify-write I/O
iomap: renumber IOMAP_HOLE to 0
iomap: use write_begin to read pages to unshare
iomap: move the zeroing case out of iomap_read_page_sync
iomap: ignore non-shared or non-data blocks in xfs_file_dirty
iomap: always use AOP_FLAG_NOFS in iomap_write_begin
iomap: remove the unused iomap argument to __iomap_write_end
iomap: better document the IOMAP_F_* flags
iomap: enhance writeback error message
iomap: pass a struct page to iomap_finish_page_writeback
iomap: cleanup iomap_ioend_compare
iomap: move struct iomap_page out of iomap.h
iomap: warn on inline maps in iomap_writepage_map
iomap: lift the xfs writeback code to iomap
...
Before this patch, when a node withdrew a gfs2 file system, it
wrote a (clean) unmount log header. That's wrong. You don't want
to write anything to the journal once you're withdrawn because
that's acknowledging that the transaction is complete and the
journal is in good shape, neither of which may be a valid
assumption when the file system is withdrawn. This is especially
true if the withdraw was caused due to io errors writing to the
journal in the first place. The best course of action is to leave
the journal "as is" until it may be safely replayed during
journal recovery, regardless of whether it's done by this node or
another.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
In gfs2_create_inode, gfs2_set_inode_blocks is called twice for no good reason.
Remove the unnecessary call.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, gfs2_create_inode had a use-after-free for the
iopen glock in some error paths because it did this:
gfs2_glock_put(io_gl);
fail_gunlock2:
if (io_gl)
clear_bit(GLF_INODE_CREATING, &io_gl->gl_flags);
In some cases, the io_gl was used for create and only had one
reference, so the glock might be freed before the clear_bit().
This patch tries to straighten it out by only jumping to the
error paths where iopen is properly set, and moving the
gfs2_glock_put after the clear_bit.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
This patch closes a timing window in which two processes compete
and overlap in the execution of do_xmote for the same glock:
Process A Process B
------------------------------------ -----------------------------
1. Grabs gl_lockref and calls do_xmote
2. Grabs gl_lockref but is blocked
3. Sets GLF_INVALIDATE_IN_PROGRESS
4. Unlocks gl_lockref
5. Calls do_xmote
6. Call glops->go_sync
7. test_and_clear_bit GLF_DIRTY
8. Call gfs2_log_flush Call glops->go_sync
9. (slow IO, so it blocks a long time) test_and_clear_bit GLF_DIRTY
It's not dirty (step 7) returns
10. Tests GLF_INVALIDATE_IN_PROGRESS
11. Calls go_inval (rgrp_go_inval)
12. gfs2_rgrp_relse does brelse
13. truncate_inode_pages_range
14. Calls lm_lock UN
In step 14 we've just told dlm to give the glock to another node
when, in fact, process A has not finished the IO and synced all
buffer_heads to disk and make sure their revokes are done.
This patch fixes the problem by changing the GLF_INVALIDATE_IN_PROGRESS
to use test_and_set_bit, and if the bit is already set, process B just
ignores it and trusts that process A will do the do_xmote in the proper
order.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, an io error, such as -EIO writing to the journal
would cause function gfs2_freeze to go into an infinite loop,
continuously retrying the freeze operation. But nothing ever clears
the -EIO except unmount after withdraw, which is impossible if the
freeze operation never ends (fails). Instead you get:
[ 6499.767994] gfs2: fsid=dm-32.0: error freezing FS: -5
[ 6499.773058] gfs2: fsid=dm-32.0: retrying...
[ 6500.791957] gfs2: fsid=dm-32.0: error freezing FS: -5
[ 6500.797015] gfs2: fsid=dm-32.0: retrying...
This patch adds a check for -EIO in gfs2_freeze, and if seen, it
dequeues the freeze glock, aborts the loop and returns the error.
Also, there's no need to pass the freeze holder to function
gfs2_lock_fs_check_clean since it's only called in one place and
it's a well-known superblock pointer, so this simplifies that.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, function gfs2_freeze would loop forever if the
filesystem it tries to freeze is withdrawn. That's because function
gfs2_lock_fs_check_clean tries to enqueue the glock of the journal and
the gfs2_glock returns -EIO because you can't enqueue a journaled glock
after a withdraw.
Move the check for file system withdraw inside the loop so that the loop
can end when withdraw occurs.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, an IO error encountered in function gfs2_ail1_flush
would cause a deadlock: because of the io error (and its resulting
withdrawn state), buffers stopped being written to the journal.
Buffers would remain on the ail1 list, so gfs2_ail1_start_one would
return 1 to indicate dirty buffers were still on the ail1 list.
However, when function gfs2_ail1_flush got a non-zero return code,
it would goto restart to retry the writes, which meant it would never
finish, and thus the infinite loop.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Add function gfs2_withdrawn and replace all checks for the SDF_WITHDRAWN
bit to call it. This does not change the logic or function of gfs2, and
it facilitates later improvements to the withdraw sequence.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Commit 9287c6452d fixed a situation in which gfs2 could use a glock
after it had been freed. To do that, it temporarily added a new glock
reference by calling gfs2_glock_hold in function gfs2_add_revoke.
However, if the bd element was removed by gfs2_trans_remove_revoke, it
failed to drop the additional reference.
This patch adds logic to gfs2_trans_remove_revoke to properly drop the
additional glock reference.
Fixes: 9287c6452d ("gfs2: Fix occasional glock use-after-free")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Function gfs2_log_shutdown is only called from within log.c. This
patch removes the extern declaration and makes it static.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Function gfs2_write_log_header can be used to write a log header into any of
the journals of a filesystem. When used on the node's own journal,
gfs2_write_log_header advances the current position in the log
(sdp->sd_log_flush_head) as a side effect, through function gfs2_log_bmap.
This is confusing, and it also means that we can't use gfs2_log_bmap for other
journals even if they have an extent map. So clean this mess up by not
advancing sdp->sd_log_flush_head in gfs2_write_log_header or gfs2_log_bmap
anymore and making that a responsibility of the callers instead.
This is related to commit 7c70b89695 ("gfs2: clean_journal improperly set
sd_log_flush_head").
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
When the filesystem block size is smaller than the page size, the last
page may contain blocks that lie entirely beyond the end of the file.
Make sure to only allocate blocks that lie at least partially in the
file. Allocating blocks beyond that isn't useful, and what's more, they
will not be zeroed out and may end up containing random data.
With that change in place, make sure we'll still always unstuff stuffed
inodes: iomap_writepage and iomap_writepages currently can't handle
stuffed files.
In addition, simplify and move the end-of-file check further to the top
in gfs2_page_mkwrite to avoid weird side effects like unstuffing when
we're not.
Fixes xfstest generic/263.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
In gfs2_page_mkwrite's gfs2_allocate_page_backing helper, try to
allocate as many blocks at once as we need. Pass in the size of the
requested allocation.
Fixes: 35af80aef9 ("gfs2: don't use buffer_heads in gfs2_allocate_page_backing")
Cc: stable@vger.kernel.org # v5.3+
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
When punching a hole in a file, use filemap_write_and_wait_range to
write back any dirty pages in the range of the hole. As a side effect,
if the hole isn't page aligned, this marks unaligned pages at the
beginning and the end of the hole read-only. This is required when the
block size is smaller than the page size: when those pages are written
to again after the hole punching, we must make sure that page_mkwrite is
called for those pages so that the page will be fully allocated and any
blocks turned into holes from the hole punching will be reallocated.
(If a page is writably mapped, page_mkwrite won't be called.)
Fixes xfstest generic/567.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
The gfs2_fs_parameters is not used outside the unit
it is declared in, so make it static.
Fixes the following sparse warning:
fs/gfs2/ops_fstype.c:1331:39: warning: symbol 'gfs2_fs_parameters' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
There is use of unnecessary semicolon after switch case.
Removed the semicolon.
Signed-off-by: Aliasgar Surti <aliasgar.surti500@gmail.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
When gfs2 was converted to use fs_context, the initialisation of the
mount args structure to the currently active args was lost with the
removal of gfs2_remount_fs(), so the checks of the new args on remount
became checks against the default values instead of the current ones.
This caused unexpected remount behaviour and test failures (xfstests
generic/294, generic/306 and generic/452).
Reinstate the args initialisation, this time in gfs2_init_fs_context()
and conditional upon fc->purpose, as that's the only time we get control
before the mount args are parsed in the remount process.
Fixes: 1f52aa08d1 ("gfs2: Convert gfs2 to fs_context")
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
gfs2 and gfs2meta share an ->init_fs_context function which allocates an
args structure stored in fc->fs_private. gfs2 registers a ->free
function to free this memory when the fs_context is cleaned up, but
there was not one registered for gfs2meta, causing a leak.
Register a ->free function for gfs2meta. The existing gfs2_fc_free
function does what we need.
Reported-by: syzbot+c2fdfd2b783754878fb6@syzkaller.appspotmail.com
Fixes: 1f52aa08d1 ("gfs2: Convert gfs2 to fs_context")
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Out of the four ioctl commands supported on gfs2, only FITRIM
works in compat mode.
Add a proper handler based on the ext4 implementation.
Fixes: 6ddc5c3ddf ("gfs2: getlabel support")
Reviewed-by: Bob Peterson <rpeterso@redhat.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The srcmap is used to identify where the read is to be performed from.
It is passed to ->iomap_begin, which can fill it in if we need to read
data for partially written blocks from a different location than the
write target. The srcmap is only supported for buffered writes so far.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
[hch: merged two patches, removed the IOMAP_F_COW flag, use iomap as
srcmap if not set, adjust length down to srcmap end as well]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Filesystems do not support doing IO as asynchronous in some cases. For
example in case of unaligned writes or in case file size needs to be
extended (e.g. for ext4). Instead of forcing filesystem to wait for AIO
in such cases, add argument to iomap_dio_rw() which makes the function
wait for IO completion. This also results in executing
iomap_dio_complete() inline in iomap_dio_rw() providing its return value
to the caller as for ordinary sync IO.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Pull more mount API conversions from Al Viro:
"Assorted conversions of options parsing to new API.
gfs2 is probably the most serious one here; the rest is trivial stuff.
Other things in what used to be #work.mount are going to wait for the
next cycle (and preferably go via git trees of the filesystems
involved)"
* 'work.mount3' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
gfs2: Convert gfs2 to fs_context
vfs: Convert spufs to use the new mount API
vfs: Convert hypfs to use the new mount API
hypfs: Fix error number left in struct pointer member
vfs: Convert functionfs to use the new mount API
vfs: Convert bpf to use the new mount API
Convert gfs2 and gfs2meta to fs_context. Removes the duplicated vfs code
from gfs2_mount and instead uses the new vfs_get_block_super() before
switching the ->root to the appropriate dentry.
The mount option parsing has been converted to the new API and error
reporting for invalid options has been made more precise at the same
time.
All of the mount/remount code has been moved into ops_fstype.c
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: cluster-devel@redhat.com
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
In function sweep_bh_for_rgrps, which is a helper for punch_hole,
it uses variable buf_in_tr to keep track of when it needs to commit
pending block frees on a partial delete that overflows the
transaction created for the delete. The problem is that the
variable was initialized at the start of function sweep_bh_for_rgrps
but it was never cleared, even when starting a new transaction.
This patch reinitializes the variable when the transaction is
ended, so the next transaction starts out with it cleared.
Fixes: d552a2b9b3 ("GFS2: Non-recursive delete")
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
On filesystems with a block size smaller than PAGE_SIZE, page_mkwrite is
called for each memory-mapped page before that page can be written to.
When such a memory-mapped file is truncated down to size x which is not
a multiple of the page size and then back to a larger size, the page
straddling size x can end up with a partial block mapping. In that
case, make sure to mark that page read-only so that page_mkwrite will be
called before the page can be written to the next time.
(There is no point in marking the page straddling size x read-only when
truncating down as writing to memory beyond the end of the file will
result in SIGBUS instead of growing the file.)
Fixes xfstests generic/029, generic/030 on filesystems with a block size
smaller than PAGE_SIZE.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Because s_vfs_rename_mutex is not cluster-wide, multiple nodes can
reverse the roles of which directories are "old" and which are "new" for
the purposes of rename. This can cause deadlocks where two nodes end up
waiting for each other.
There can be several layers of directory dependencies across many nodes.
This patch fixes the problem by acquiring all gfs2_rename's inode glocks
asychronously and waiting for all glocks to be acquired. That way all
inodes are locked regardless of the order.
The timeout value for multiple asynchronous glocks is calculated to be
the total of the individual wait times for each glock times two.
Since gfs2_exchange is very similar to gfs2_rename, both functions are
patched in the same way.
A new async glock wait queue, sd_async_glock_wait, keeps a list of
waiters for these events. If gfs2's holder_wake function detects an
async holder, it wakes up any waiters for the event. The waiter only
tests whether any of its requests are still pending.
Since the glocks are sent to dlm asychronously, the wait function needs
to check to see which glocks, if any, were granted.
If a glock is granted by dlm (and therefore held), its minimum hold time
is checked and adjusted as necessary, as other glock grants do.
If the event times out, all glocks held thus far must be dequeued to
resolve any existing deadlocks. Then, if there are any outstanding
locking requests, we need to loop around and wait for dlm to respond to
those requests too. After we release all requests, we return -ESTALE to
the caller (vfs rename) which loops around and retries the request.
Node1 Node2
--------- ---------
1. Enqueue A Enqueue B
2. Enqueue B Enqueue A
3. A granted
6. B granted
7. Wait for B
8. Wait for A
9. A times out (since Node 1 holds A)
10. Dequeue B (since it was granted)
11. Wait for all requests from DLM
12. B Granted (since Node2 released it in step 10)
13. Rename
14. Dequeue A
15. DLM Grants A
16. Dequeue A (due to the timeout and since we
no longer have B held for our task).
17. Dequeue B
18. Return -ESTALE to vfs
19. VFS retries the operation, goto step 1.
This release-all-locks / acquire-all-locks may slow rename / exchange
down as both nodes struggle in the same way and do the same thing.
However, this will only happen when there is contention for the same
inodes, which ought to be rare.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
This patch moves the code that updates glock minimum hold
time to a separate function. This will be called by a future
patch.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, gfs2_rename added a holder for the rgrp glock to
its array of holders, ghs. There's nothing wrong with that, but this
patch separates it into a separate holder. This is done to ensure
it's always locked last as per the proper glock lock ordering,
and also to pave the way for a future patch in which we will
lock the non-rgrp glocks asynchronously.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
The brelse() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
[The same applies to brelse() in gfs2_dir_no_add (which Coccinelle
apparently missed), so fix that as well.]
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Get rid of the assumption that the number of slots can at most increase by
RECOVER_SIZE_INC (16) in set_recover_size.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
This patch fixes three places in which temporary character buffers
could overflow due to the addition of the file system id from patch
3792ce973f. Thanks to Dan Carpenter for pointing it out.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, function gfs2_drevalidate was a horrific tangle of
unreadable labels, cases and goto statements. This patch tries to
simplify the logic and make it more readable.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
When allocating space with fallocate, always update the file timestamps
and mark the inode dirty, no matter if the FALLOC_FL_KEEP_SIZE flag is
set or not. The inode needs to be marked dirty so that a subsequent
fsync will pick it up and any new allocations will make it to disk.
Filesystems like xfs and ext4 always update the timestamps, so make
gfs2 behave the same way.
Fixes xfstest generic/483.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
In gfs2_alloc_inode, when kmem_cache_alloc cannot allocate a new object, return
NULL immediately. The code currently relies on the fact that i_inode is the
first member in struct gfs2_inode and so ip and &ip->i_inode evaluate to the
same address, but that isn't immediately obvious.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Bob Peterson <rpeterso@redhat.com>
iomap handles all the nitty-gritty details of zeroing a file
range for us, so use the proper helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Bob Peterson <rpeterso@redhat.com>
Add support for the IOMAP_ZERO iomap operation so that iomap_zero_range will
work as expected. In the IOMAP_ZERO case, the caller of iomap_zero_range is
responsible for taking an exclusive glock on the inode, so we need no
additional locking in gfs2_iomap_begin.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Bob Peterson <rpeterso@redhat.com>
Following commit d0a22a4b03 ("gfs2: Fix iomap write page reclaim deadlock"),
gfs2_iomap_begin and gfs2_iomap_begin_write can be further cleaned up and the
split between those two functions can be improved.
With suggestions from Christoph Hellwig.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Bob Peterson <rpeterso@redhat.com>
It turns out that the current version of gfs2_metadata_walker suffers
from multiple problems that can cause gfs2_hole_size to report an
incorrect size. This will confuse fiemap as well as lseek with the
SEEK_DATA flag.
Fix that by changing gfs2_hole_walker to compute the metapath to the
first data block after the hole (if any), and compute the hole size
based on that.
Fixes xfstest generic/490.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Bob Peterson <rpeterso@redhat.com>
Cc: stable@vger.kernel.org # v4.18+
With the recent iomap write page reclaim deadlock fix, it turns out that the
GLF_DIRTY flag isn't always set when it needs to be anymore: previously, this
happened as a side effect of always adding the inode buffer head to the current
transaction with gfs2_trans_add_meta, but this isn't happening consistently
anymore. Fix by removing an additional unnecessary gfs2_trans_add_meta call
and by setting the GLF_DIRTY flag in gfs2_iomap_end.
(The GLF_DIRTY flag causes inode_go_sync to flush the transaction log when
syncing out the glock of that inode. When the flag isn't set, inode_go_sync
will skip inodes, including ones with an i_state of I_DIRTY_PAGES, which will
lead to cluster incoherency.)
In addition, in gfs2_iomap_page_done, if the metadata has changed, mark the
inode as I_DIRTY_DATASYNC to have the inode added to the current transaction:
we don't expect metadata to change here, but let's err on the safe side.
Fixes: d0a22a4b03 ("gfs2: Fix iomap write page reclaim deadlock");
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
- Standardize parameter checking for the SETFLAGS and FSSETXATTR ioctls
(which were the file attribute setters for ext4 and xfs and have now
been hoisted to the vfs)
- Only allow the DAX flag to be set on files and directories.
-----BEGIN PGP SIGNATURE-----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=uH2E
-----END PGP SIGNATURE-----
Merge tag 'vfs-fix-ioctl-checking-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull common SETFLAGS/FSSETXATTR parameter checking from Darrick Wong:
"Here's a patch series that sets up common parameter checking functions
for the FS_IOC_SETFLAGS and FS_IOC_FSSETXATTR ioctl implementations.
The goal here is to reduce the amount of behaviorial variance between
the filesystems where those ioctls originated (ext2 and XFS,
respectively) and everybody else.
- Standardize parameter checking for the SETFLAGS and FSSETXATTR
ioctls (which were the file attribute setters for ext4 and xfs and
have now been hoisted to the vfs)
- Only allow the DAX flag to be set on files and directories"
* tag 'vfs-fix-ioctl-checking-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
vfs: only allow FSSETXATTR to set DAX flag on files and dirs
vfs: teach vfs_ioc_fssetxattr_check to check extent size hints
vfs: teach vfs_ioc_fssetxattr_check to check project id info
vfs: create a generic checking function for FS_IOC_FSSETXATTR
vfs: create a generic checking and prep function for FS_IOC_SETFLAGS
Here is the "big" driver core and debugfs changes for 5.3-rc1
It's a lot of different patches, all across the tree due to some api
changes and lots of debugfs cleanups. Because of this, there is going
to be some merge issues with your tree at the moment, I'll follow up
with the expected resolutions to make it easier for you.
Other than the debugfs cleanups, in this set of changes we have:
- bus iteration function cleanups (will cause build warnings
with s390 and coresight drivers in your tree)
- scripts/get_abi.pl tool to display and parse Documentation/ABI
entries in a simple way
- cleanups to Documenatation/ABI/ entries to make them parse
easier due to typos and other minor things
- default_attrs use for some ktype users
- driver model documentation file conversions to .rst
- compressed firmware file loading
- deferred probe fixes
All of these have been in linux-next for a while, with a bunch of merge
issues that Stephen has been patient with me for. Other than the merge
issues, functionality is working properly in linux-next :)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXSgpnQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykcwgCfS30OR4JmwZydWGJ7zK/cHqk+KjsAnjOxjC1K
LpRyb3zX29oChFaZkc5a
=XrEZ
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and debugfs updates from Greg KH:
"Here is the "big" driver core and debugfs changes for 5.3-rc1
It's a lot of different patches, all across the tree due to some api
changes and lots of debugfs cleanups.
Other than the debugfs cleanups, in this set of changes we have:
- bus iteration function cleanups
- scripts/get_abi.pl tool to display and parse Documentation/ABI
entries in a simple way
- cleanups to Documenatation/ABI/ entries to make them parse easier
due to typos and other minor things
- default_attrs use for some ktype users
- driver model documentation file conversions to .rst
- compressed firmware file loading
- deferred probe fixes
All of these have been in linux-next for a while, with a bunch of
merge issues that Stephen has been patient with me for"
* tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (102 commits)
debugfs: make error message a bit more verbose
orangefs: fix build warning from debugfs cleanup patch
ubifs: fix build warning after debugfs cleanup patch
driver: core: Allow subsystems to continue deferring probe
drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDT
arch_topology: Remove error messages on out-of-memory conditions
lib: notifier-error-inject: no need to check return value of debugfs_create functions
swiotlb: no need to check return value of debugfs_create functions
ceph: no need to check return value of debugfs_create functions
sunrpc: no need to check return value of debugfs_create functions
ubifs: no need to check return value of debugfs_create functions
orangefs: no need to check return value of debugfs_create functions
nfsd: no need to check return value of debugfs_create functions
lib: 842: no need to check return value of debugfs_create functions
debugfs: provide pr_fmt() macro
debugfs: log errors when something goes wrong
drivers: s390/cio: Fix compilation warning about const qualifiers
drivers: Add generic helper to match by of_node
driver_find_device: Unify the match function with class_find_device()
bus_find_device: Unify the match callback with class_find_device
...
- An initial batch of obvious cleanups and fixes from Bob's
recovery patch queue.
- Two iomap conversion patches and some cleanups from Christoph
Hellwig.
- A cosmetic cleanup from Kefeng Wang (Huawei).
- Another minor fix and cleanup by me.
-----BEGIN PGP SIGNATURE-----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=5lRq
-----END PGP SIGNATURE-----
Merge tag 'gfs2-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Andreas Gruenbacher:
"Some relatively minor changes for gfs2:
- An initial batch of obvious cleanups and fixes from Bob's recovery
patch queue.
- Two iomap conversion patches and some cleanups from Christoph
Hellwig.
- A cosmetic cleanup from Kefeng Wang (Huawei).
- Another minor fix and cleanup by me"
* tag 'gfs2-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Remove unused gfs2_iomap_alloc argument
gfs2: don't use buffer_heads in gfs2_allocate_page_backing
gfs2: use iomap_bmap instead of generic_block_bmap
gfs2: mark stuffed_readpage static
gfs2: merge gfs2_writepage_common into gfs2_writepage
gfs2: merge gfs2_writeback_aops and gfs2_ordered_aops
gfs2: remove the unused gfs2_stuffed_write_end function
gfs2: use page_offset in gfs2_page_mkwrite
gfs2: replace more printk with calls to fs_info and friends
gfs2: dump fsid when dumping glock problems
gfs2: simplify gfs2_freeze by removing case
gfs2: Rename SDF_SHUTDOWN to SDF_WITHDRAWN
gfs2: Warn when a journal replay overwrites a rgrp with buffers
gfs2: log which portion of the journal is replayed
gfs2: eliminate tr_num_revoke_rm
gfs2: kthread and remount improvements
gfs2: Use IS_ERR_OR_NULL
gfs2: Clean up freeing struct gfs2_sbd
- Only mark inode dirty at the end of writing to a file (instead of once
for every page written).
- Fix for an accounting error in the page_done callback.
-----BEGIN PGP SIGNATURE-----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=so9b
-----END PGP SIGNATURE-----
Merge tag 'iomap-5.3-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull iomap updates from Darrick Wong:
"There are a few fixes for gfs2 but otherwise it's pretty quiet so far.
- Only mark inode dirty at the end of writing to a file (instead of
once for every page written).
- Fix for an accounting error in the page_done callback"
* tag 'iomap-5.3-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: fix page_done callback for short writes
fs: fold __generic_write_end back into generic_write_end
iomap: don't mark the inode dirty in iomap_write_end
Rewrite gfs2_allocate_page_backing to call gfs2_iomap_get_alloc and operate on
struct iomap directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
No need to indirect through get_blocks and buffer_heads when we can just use
the iomap version.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
There is no need to keep these two functions separate.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
The only difference between the two is that gfs2_ordered_aops sets the
set_page_dirty method to __set_page_dirty_buffers, but given that
__set_page_dirty_buffers is the default, if no method is set, there is no need
to to do that. Merge the two sets of operations into one.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
This function was overlooked when the write_begin and write_end address space
operations were removed as part of gfs2's iomap conversion.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Without casting page->index to a guaranteed 64-bit type, the value might be
treated as 32-bit on 32-bit platforms and thus get truncated.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Create a generic function to check incoming FS_IOC_SETFLAGS flag values
and later prepare the inode for updates so that we can standardize the
implementations that follow ext4's flag values.
Note that the efivarfs implementation no longer fails a no-op SETFLAGS
without CAP_LINUX_IMMUTABLE since that's the behavior in ext*.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: David Sterba <dsterba@suse.com>
Reviewed-by: Bob Peterson <rpeterso@redhat.com>
Marking the inode dirty for each page copied into the page cache can be
very inefficient for file systems that use the VFS dirty inode tracking,
and is completely pointless for those that don't use the VFS dirty inode
tracking. So instead, only set an iomap flag when changing the in-core
inode size, and open code the rest of __generic_write_end.
Partially based on code from Christoph Hellwig.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This patch replaces a few leftover printk errors with calls to
fs_info and similar, so that the file system having the error is
properly logged.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, if a glock error was encountered, the glock with
the problem was dumped. But sometimes you may have lots of file systems
mounted, and that doesn't tell you which file system it was for.
This patch adds a new boolean parameter fsid to the dump_glock family
of functions. For non-error cases, such as dumping the glocks debugfs
file, the fsid is not dumped in order to keep lock dumps and glocktop
as clean as possible. For all error cases, such as GLOCK_BUG_ON, the
file system id is now printed. This will make it easier to debug.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Function gfs2_freeze had a case statement that simply checked the
error code, but the break statements just made the logic hard to
read. This patch simplifies the logic in favor of a simple if.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, the superblock flag indicating when a file system
is withdrawn was called SDF_SHUTDOWN. This patch simply renames it to
the more obvious SDF_WITHDRAWN.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
This patch adds some instrumentation in gfs2's journal replay that
indicates when we're about to overwrite a rgrp for which we already
have a valid buffer_head.
When this problem occurs, it's a situation in which this node has
been granted a rgrp glock and subsequently read in buffer_heads for
it, and possibly even made changes to the rgrp bits and/or
allocation values. But now another node has failed and forced us to
replay its journal, but its journal contains a copy of the same
rgrp, without a revoke, which means we're about to overwrite a
rgrp that we now rightfully own, with an obsolete copy. That is
always a problem. It means the other node (which failed and left
its journal to be replayed) failed to flush out its rgrp buffers,
write out the revoke, and invalidate its copy before it released
the glock to our possession.
No node should ever release a glock until its metadata has been
written to the journal and revoked and invalidated..
We also kludge around the problem and refuse to replace our good
copy with the journals bad copy by not marking the buffer dirty,
but never do it silently. That's wallpapering over a larger problem
that still exists. IOW, if this situation can happen to this node,
it can also happen to a different node and we wouldn't even know it
or be able to circumvent it: Suppose we have a 3-node cluster:
Node 1 fails, leaving an obsolete rgrp block in its journal without
a revoke. Node 2 grabs the rgrp as soon as the rgrp glock is
released and starts making changes, allocating and freeing blocks
from the rgrp, etc. Node 3 replays the journal from node 1,
oblivious and unaware that it's about to overwrite node 2's changes.
So we still need to be vocal and log the error to make it apparent
that a corruption path still exists in gfs2.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
When a journal is replayed, gfs2 logs a message similar to:
jid=X: Replaying journal...
This patch adds the tail and block number so that the range of the
replayed block is also printed. These values will match the values
shown if the journal is dumped with gfs2_edit -p journalX. The
resulting output looks something like this:
jid=1: Replaying journal...0x28b7 to 0x2beb
This will allow us to better debug file system corruption problems.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
For its journal processing, gfs2 kept track of the number of buffers
added and removed on a per-transaction basis. These values are used
to calculate space needed in the journal. But while these calculations
make sense for the number of buffers, they make no sense for revokes.
Revokes are managed in their own list, linked from the superblock.
So it's entirely unnecessary to keep separate per-transaction counts
for revokes added and removed. A single count will do the same job.
Therefore, this patch combines the transaction revokes into a single
count.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, gfs2 saved the pointers to the two daemon threads
(logd and quotad) in the superblock, but they were never cleared,
even if the threads were stopped (e.g. on remount -o ro). That meant
that certain error conditions (like a withdrawn file system) could
race. For example, xfstests generic/361 caused an IO error during
remount -o ro, which caused the kthreads to be stopped, then the
error flagged. Later, when the test unmounted the file system, it
would try to stop the threads a second time with kthread_stop.
This patch does two things: First, every time it stops the threads
it zeroes out the thread pointer, and also checks whether it's NULL
before trying to stop it. Second, in function gfs2_remount_fs, it
was returning if an error was logged by either of the two functions
for gfs2_make_fs_ro and _rw, which caused it to bypass the online
uevent at the bottom of the function. This removes that bypass in
favor of just running the whole function, then returning the error.
That way, unmounts and remounts won't hang forever.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Use IS_ERR_OR_NULL where appropriate.
(Several more places converted by Andreas.)
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Add a free_sbd function for freeing a struct gfs2_sbd. Use that for
freeing a super-block descriptor, either directly or via kobject_put.
Free sd_lkstats inside the kobject release function: that way,
gfs2_put_super will no longer leak sd_lkstats.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
The pos and len arguments to the iomap page_prepare callback are not
block aligned, so we need to take that into account when computing the
number of blocks.
Fixes: d0a22a4b03 ("gfs2: Fix iomap write page reclaim deadlock")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
The kobj_type default_attrs field is being replaced by the
default_groups field. Replace the default_attrs field in gfs2_ktype
with default_groups. Use the ATTRIBUTE_GROUPS macro to create
gfs2_groups.
Signed-off-by: Kimberly Brown <kimbrownkd@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Another round of SPDX header file fixes for 5.2-rc4
These are all more "GPL-2.0-or-later" or "GPL-2.0-only" tags being
added, based on the text in the files. We are slowly chipping away at
the 700+ different ways people tried to write the license text. All of
these were reviewed on the spdx mailing list by a number of different
people.
We now have over 60% of the kernel files covered with SPDX tags:
$ ./scripts/spdxcheck.py -v 2>&1 | grep Files
Files checked: 64533
Files with SPDX: 40392
Files with errors: 0
I think the majority of the "easy" fixups are now done, it's now the
start of the longer-tail of crazy variants to wade through.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXPuGTg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykBvQCg2SG+HmDH+tlwKLT/q7jZcLMPQigAoMpt9Uuy
sxVEiFZo8ZU9v1IoRb1I
=qU++
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull yet more SPDX updates from Greg KH:
"Another round of SPDX header file fixes for 5.2-rc4
These are all more "GPL-2.0-or-later" or "GPL-2.0-only" tags being
added, based on the text in the files. We are slowly chipping away at
the 700+ different ways people tried to write the license text. All of
these were reviewed on the spdx mailing list by a number of different
people.
We now have over 60% of the kernel files covered with SPDX tags:
$ ./scripts/spdxcheck.py -v 2>&1 | grep Files
Files checked: 64533
Files with SPDX: 40392
Files with errors: 0
I think the majority of the "easy" fixups are now done, it's now the
start of the longer-tail of crazy variants to wade through"
* tag 'spdx-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (159 commits)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 450
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 449
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 448
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 446
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 445
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 444
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 443
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 442
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 440
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 438
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 437
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 436
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 435
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 434
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 433
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 432
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 431
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 430
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 429
...
Commit 73118ca8ba introduced a glock reference counting bug in
gfs2_trans_remove_revoke. Given that, replacing gl_revokes with a GLF flag is
no longer useful, so revert that commit.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Bob Peterson